---
_id: '43153'
abstract:
- lang: eng
  text: Facing a decreasing amount of resources on the one hand and an increasing
    demand for comfort on the other, more and more attention is being paid to sustainability
    and care for the environment. Particularly in the automotive sector, lightweight
    design principles continue to prosper rapidly. As a result, adjusted materials
    for different applications were developed. Due to the formation of intermetallic
    phases, most multi-material mixes cannot be welded and require adapted joining
    technologies. Mechanical joining technologies such as self-piercing riveting and
    mechanical clinching have proven effective methods of joining lightweight materials
    like aluminium and ductile steels. New high-strength steels are increasingly used
    in crash-sections, where limited deformation under impact load is required. These
    hot stamped steels have a very low elongation at break and therefore a low formability.
    Currently there is no joining by forming technology without pre-punching available
    using these grades of steels on die-side. The newly developed shear-clinching
    process is one possible method of joining this kind of material without additional
    elements. The fundamental idea of shear-clinching is a single-stage process in
    which pre-punching of the die-side material is performed by indirect shear-cutting
    and subsequent forming of the upper layer into this hole. This would immensely
    enlarge the application segment of mechanical clinching even if hot stamped steels
    are positioned on die-side. Fundamental studies are required to ensure process
    reliability and it is necessary to break down the joining process into fragments,
    like pre-punching and clinching with pre-punched sheet, and superpose them to
    form the combined procedure shear-clinching. This paper presents a detailed investigation
    of the sub-process clinching with pre-hole.
author:
- first_name: Marion
  full_name: Merklein, Marion
  last_name: Merklein
- first_name: Gerson
  full_name: Meschut, Gerson
  last_name: Meschut
- first_name: Martin
  full_name: Müller, Martin
  last_name: Müller
- first_name: Réjane
  full_name: Hörhold, Réjane
  last_name: Hörhold
citation:
  ama: Merklein M, Meschut G, Müller M, Hörhold R. Basic Investigations of Non-Pre-Punched
    Joining by Forming of Aluminium Alloy and High Strength Steel with Shear-Clinching
    Technology. <i>Key Engineering Materials</i>. 2014;611-612:1413-1420. doi:<a href="https://doi.org/10.4028/www.scientific.net/kem.611-612.1413">10.4028/www.scientific.net/kem.611-612.1413</a>
  apa: Merklein, M., Meschut, G., Müller, M., &#38; Hörhold, R. (2014). Basic Investigations
    of Non-Pre-Punched Joining by Forming of Aluminium Alloy and High Strength Steel
    with Shear-Clinching Technology. <i>Key Engineering Materials</i>, <i>611–612</i>,
    1413–1420. <a href="https://doi.org/10.4028/www.scientific.net/kem.611-612.1413">https://doi.org/10.4028/www.scientific.net/kem.611-612.1413</a>
  bibtex: '@article{Merklein_Meschut_Müller_Hörhold_2014, title={Basic Investigations
    of Non-Pre-Punched Joining by Forming of Aluminium Alloy and High Strength Steel
    with Shear-Clinching Technology}, volume={611–612}, DOI={<a href="https://doi.org/10.4028/www.scientific.net/kem.611-612.1413">10.4028/www.scientific.net/kem.611-612.1413</a>},
    journal={Key Engineering Materials}, publisher={Trans Tech Publications, Ltd.},
    author={Merklein, Marion and Meschut, Gerson and Müller, Martin and Hörhold, Réjane},
    year={2014}, pages={1413–1420} }'
  chicago: 'Merklein, Marion, Gerson Meschut, Martin Müller, and Réjane Hörhold. “Basic
    Investigations of Non-Pre-Punched Joining by Forming of Aluminium Alloy and High
    Strength Steel with Shear-Clinching Technology.” <i>Key Engineering Materials</i>
    611–612 (2014): 1413–20. <a href="https://doi.org/10.4028/www.scientific.net/kem.611-612.1413">https://doi.org/10.4028/www.scientific.net/kem.611-612.1413</a>.'
  ieee: 'M. Merklein, G. Meschut, M. Müller, and R. Hörhold, “Basic Investigations
    of Non-Pre-Punched Joining by Forming of Aluminium Alloy and High Strength Steel
    with Shear-Clinching Technology,” <i>Key Engineering Materials</i>, vol. 611–612,
    pp. 1413–1420, 2014, doi: <a href="https://doi.org/10.4028/www.scientific.net/kem.611-612.1413">10.4028/www.scientific.net/kem.611-612.1413</a>.'
  mla: Merklein, Marion, et al. “Basic Investigations of Non-Pre-Punched Joining by
    Forming of Aluminium Alloy and High Strength Steel with Shear-Clinching Technology.”
    <i>Key Engineering Materials</i>, vol. 611–612, Trans Tech Publications, Ltd.,
    2014, pp. 1413–20, doi:<a href="https://doi.org/10.4028/www.scientific.net/kem.611-612.1413">10.4028/www.scientific.net/kem.611-612.1413</a>.
  short: M. Merklein, G. Meschut, M. Müller, R. Hörhold, Key Engineering Materials
    611–612 (2014) 1413–1420.
date_created: 2023-03-29T08:06:09Z
date_updated: 2023-03-29T08:08:49Z
department:
- _id: '157'
doi: 10.4028/www.scientific.net/kem.611-612.1413
keyword:
- Mechanical Engineering
- Mechanics of Materials
- General Materials Science
language:
- iso: eng
page: 1413-1420
publication: Key Engineering Materials
publication_identifier:
  issn:
  - 1662-9795
publication_status: published
publisher: Trans Tech Publications, Ltd.
status: public
title: Basic Investigations of Non-Pre-Punched Joining by Forming of Aluminium Alloy
  and High Strength Steel with Shear-Clinching Technology
type: journal_article
user_id: '53912'
volume: 611-612
year: '2014'
...
---
_id: '43426'
author:
- first_name: G.
  full_name: Meschut, G.
  last_name: Meschut
- first_name: O.
  full_name: Hahn, O.
  last_name: Hahn
- first_name: V.
  full_name: Janzen, V.
  last_name: Janzen
- first_name: T.
  full_name: Olfermann, T.
  last_name: Olfermann
citation:
  ama: Meschut G, Hahn O, Janzen V, Olfermann T. Innovative joining technologies for
    multi-material structures. <i>Welding in the World</i>. 2013;58(1):65-75. doi:<a
    href="https://doi.org/10.1007/s40194-013-0098-3">10.1007/s40194-013-0098-3</a>
  apa: Meschut, G., Hahn, O., Janzen, V., &#38; Olfermann, T. (2013). Innovative joining
    technologies for multi-material structures. <i>Welding in the World</i>, <i>58</i>(1),
    65–75. <a href="https://doi.org/10.1007/s40194-013-0098-3">https://doi.org/10.1007/s40194-013-0098-3</a>
  bibtex: '@article{Meschut_Hahn_Janzen_Olfermann_2013, title={Innovative joining
    technologies for multi-material structures}, volume={58}, DOI={<a href="https://doi.org/10.1007/s40194-013-0098-3">10.1007/s40194-013-0098-3</a>},
    number={1}, journal={Welding in the World}, publisher={Springer Science and Business
    Media LLC}, author={Meschut, G. and Hahn, O. and Janzen, V. and Olfermann, T.},
    year={2013}, pages={65–75} }'
  chicago: 'Meschut, G., O. Hahn, V. Janzen, and T. Olfermann. “Innovative Joining
    Technologies for Multi-Material Structures.” <i>Welding in the World</i> 58, no.
    1 (2013): 65–75. <a href="https://doi.org/10.1007/s40194-013-0098-3">https://doi.org/10.1007/s40194-013-0098-3</a>.'
  ieee: 'G. Meschut, O. Hahn, V. Janzen, and T. Olfermann, “Innovative joining technologies
    for multi-material structures,” <i>Welding in the World</i>, vol. 58, no. 1, pp.
    65–75, 2013, doi: <a href="https://doi.org/10.1007/s40194-013-0098-3">10.1007/s40194-013-0098-3</a>.'
  mla: Meschut, G., et al. “Innovative Joining Technologies for Multi-Material Structures.”
    <i>Welding in the World</i>, vol. 58, no. 1, Springer Science and Business Media
    LLC, 2013, pp. 65–75, doi:<a href="https://doi.org/10.1007/s40194-013-0098-3">10.1007/s40194-013-0098-3</a>.
  short: G. Meschut, O. Hahn, V. Janzen, T. Olfermann, Welding in the World 58 (2013)
    65–75.
date_created: 2023-04-06T09:14:20Z
date_updated: 2023-04-06T09:14:41Z
department:
- _id: '157'
doi: 10.1007/s40194-013-0098-3
intvolume: '        58'
issue: '1'
keyword:
- Metals and Alloys
- Mechanical Engineering
- Mechanics of Materials
language:
- iso: eng
page: 65-75
publication: Welding in the World
publication_identifier:
  issn:
  - 0043-2288
  - 1878-6669
publication_status: published
publisher: Springer Science and Business Media LLC
status: public
title: Innovative joining technologies for multi-material structures
type: journal_article
user_id: '53912'
volume: 58
year: '2013'
...
---
_id: '46510'
author:
- first_name: Kay-Peter
  full_name: Hoyer, Kay-Peter
  id: '48411'
  last_name: Hoyer
- first_name: Gian Luigi
  full_name: Angrisani, Gian Luigi
  last_name: Angrisani
- first_name: Christian
  full_name: Klose, Christian
  last_name: Klose
- first_name: Friedrich-Wilhelm
  full_name: Bach, Friedrich-Wilhelm
  last_name: Bach
- first_name: Thomas
  full_name: Hassel, Thomas
  last_name: Hassel
citation:
  ama: Hoyer K-P, Angrisani GL, Klose C, Bach F-W, Hassel T. Korrosionsverhalten binärer
    Magnesium-Zink-Legierungen in salzhaltigen Medien. <i>Materialwissenschaft und
    Werkstofftechnik</i>. 2013;44(1):84-93. doi:<a href="https://doi.org/10.1002/mawe.201300019">10.1002/mawe.201300019</a>
  apa: Hoyer, K.-P., Angrisani, G. L., Klose, C., Bach, F.-W., &#38; Hassel, T. (2013).
    Korrosionsverhalten binärer Magnesium-Zink-Legierungen in salzhaltigen Medien.
    <i>Materialwissenschaft Und Werkstofftechnik</i>, <i>44</i>(1), 84–93. <a href="https://doi.org/10.1002/mawe.201300019">https://doi.org/10.1002/mawe.201300019</a>
  bibtex: '@article{Hoyer_Angrisani_Klose_Bach_Hassel_2013, title={Korrosionsverhalten
    binärer Magnesium-Zink-Legierungen in salzhaltigen Medien}, volume={44}, DOI={<a
    href="https://doi.org/10.1002/mawe.201300019">10.1002/mawe.201300019</a>}, number={1},
    journal={Materialwissenschaft und Werkstofftechnik}, publisher={Wiley}, author={Hoyer,
    Kay-Peter and Angrisani, Gian Luigi and Klose, Christian and Bach, Friedrich-Wilhelm
    and Hassel, Thomas}, year={2013}, pages={84–93} }'
  chicago: 'Hoyer, Kay-Peter, Gian Luigi Angrisani, Christian Klose, Friedrich-Wilhelm
    Bach, and Thomas Hassel. “Korrosionsverhalten Binärer Magnesium-Zink-Legierungen
    in Salzhaltigen Medien.” <i>Materialwissenschaft Und Werkstofftechnik</i> 44,
    no. 1 (2013): 84–93. <a href="https://doi.org/10.1002/mawe.201300019">https://doi.org/10.1002/mawe.201300019</a>.'
  ieee: 'K.-P. Hoyer, G. L. Angrisani, C. Klose, F.-W. Bach, and T. Hassel, “Korrosionsverhalten
    binärer Magnesium-Zink-Legierungen in salzhaltigen Medien,” <i>Materialwissenschaft
    und Werkstofftechnik</i>, vol. 44, no. 1, pp. 84–93, 2013, doi: <a href="https://doi.org/10.1002/mawe.201300019">10.1002/mawe.201300019</a>.'
  mla: Hoyer, Kay-Peter, et al. “Korrosionsverhalten Binärer Magnesium-Zink-Legierungen
    in Salzhaltigen Medien.” <i>Materialwissenschaft Und Werkstofftechnik</i>, vol.
    44, no. 1, Wiley, 2013, pp. 84–93, doi:<a href="https://doi.org/10.1002/mawe.201300019">10.1002/mawe.201300019</a>.
  short: K.-P. Hoyer, G.L. Angrisani, C. Klose, F.-W. Bach, T. Hassel, Materialwissenschaft
    Und Werkstofftechnik 44 (2013) 84–93.
date_created: 2023-08-16T06:41:45Z
date_updated: 2023-08-16T06:43:56Z
department:
- _id: '9'
- _id: '158'
doi: 10.1002/mawe.201300019
extern: '1'
intvolume: '        44'
issue: '1'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- Condensed Matter Physics
- General Materials Science
language:
- iso: eng
page: 84-93
publication: Materialwissenschaft und Werkstofftechnik
publication_identifier:
  issn:
  - 0933-5137
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: Korrosionsverhalten binärer Magnesium-Zink-Legierungen in salzhaltigen Medien
type: journal_article
user_id: '48411'
volume: 44
year: '2013'
...
---
_id: '39520'
article_number: '125012'
author:
- first_name: A
  full_name: Brockmeier, A
  last_name: Brockmeier
- first_name: F J Santos
  full_name: Rodriguez, F J Santos
  last_name: Rodriguez
- first_name: M
  full_name: Harrison, M
  last_name: Harrison
- first_name: Ulrich
  full_name: Hilleringmann, Ulrich
  id: '20179'
  last_name: Hilleringmann
citation:
  ama: Brockmeier A, Rodriguez FJS, Harrison M, Hilleringmann U. Surface tension and
    its role for vertical wet etching of silicon. <i>Journal of Micromechanics and
    Microengineering</i>. 2012;22(12). doi:<a href="https://doi.org/10.1088/0960-1317/22/12/125012">10.1088/0960-1317/22/12/125012</a>
  apa: Brockmeier, A., Rodriguez, F. J. S., Harrison, M., &#38; Hilleringmann, U.
    (2012). Surface tension and its role for vertical wet etching of silicon. <i>Journal
    of Micromechanics and Microengineering</i>, <i>22</i>(12), Article 125012. <a
    href="https://doi.org/10.1088/0960-1317/22/12/125012">https://doi.org/10.1088/0960-1317/22/12/125012</a>
  bibtex: '@article{Brockmeier_Rodriguez_Harrison_Hilleringmann_2012, title={Surface
    tension and its role for vertical wet etching of silicon}, volume={22}, DOI={<a
    href="https://doi.org/10.1088/0960-1317/22/12/125012">10.1088/0960-1317/22/12/125012</a>},
    number={12125012}, journal={Journal of Micromechanics and Microengineering}, publisher={IOP
    Publishing}, author={Brockmeier, A and Rodriguez, F J Santos and Harrison, M and
    Hilleringmann, Ulrich}, year={2012} }'
  chicago: Brockmeier, A, F J Santos Rodriguez, M Harrison, and Ulrich Hilleringmann.
    “Surface Tension and Its Role for Vertical Wet Etching of Silicon.” <i>Journal
    of Micromechanics and Microengineering</i> 22, no. 12 (2012). <a href="https://doi.org/10.1088/0960-1317/22/12/125012">https://doi.org/10.1088/0960-1317/22/12/125012</a>.
  ieee: 'A. Brockmeier, F. J. S. Rodriguez, M. Harrison, and U. Hilleringmann, “Surface
    tension and its role for vertical wet etching of silicon,” <i>Journal of Micromechanics
    and Microengineering</i>, vol. 22, no. 12, Art. no. 125012, 2012, doi: <a href="https://doi.org/10.1088/0960-1317/22/12/125012">10.1088/0960-1317/22/12/125012</a>.'
  mla: Brockmeier, A., et al. “Surface Tension and Its Role for Vertical Wet Etching
    of Silicon.” <i>Journal of Micromechanics and Microengineering</i>, vol. 22, no.
    12, 125012, IOP Publishing, 2012, doi:<a href="https://doi.org/10.1088/0960-1317/22/12/125012">10.1088/0960-1317/22/12/125012</a>.
  short: A. Brockmeier, F.J.S. Rodriguez, M. Harrison, U. Hilleringmann, Journal of
    Micromechanics and Microengineering 22 (2012).
date_created: 2023-01-24T11:54:26Z
date_updated: 2023-03-21T10:19:17Z
department:
- _id: '59'
doi: 10.1088/0960-1317/22/12/125012
intvolume: '        22'
issue: '12'
keyword:
- Electrical and Electronic Engineering
- Mechanical Engineering
- Mechanics of Materials
- Electronic
- Optical and Magnetic Materials
language:
- iso: eng
publication: Journal of Micromechanics and Microengineering
publication_identifier:
  issn:
  - 0960-1317
  - 1361-6439
publication_status: published
publisher: IOP Publishing
status: public
title: Surface tension and its role for vertical wet etching of silicon
type: journal_article
user_id: '20179'
volume: 22
year: '2012'
...
---
_id: '39522'
article_number: '125012'
author:
- first_name: A
  full_name: Brockmeier, A
  last_name: Brockmeier
- first_name: F J Santos
  full_name: Rodriguez, F J Santos
  last_name: Rodriguez
- first_name: M
  full_name: Harrison, M
  last_name: Harrison
- first_name: Ulrich
  full_name: Hilleringmann, Ulrich
  id: '20179'
  last_name: Hilleringmann
citation:
  ama: Brockmeier A, Rodriguez FJS, Harrison M, Hilleringmann U. Surface tension and
    its role for vertical wet etching of silicon. <i>Journal of Micromechanics and
    Microengineering</i>. 2012;22(12). doi:<a href="https://doi.org/10.1088/0960-1317/22/12/125012">10.1088/0960-1317/22/12/125012</a>
  apa: Brockmeier, A., Rodriguez, F. J. S., Harrison, M., &#38; Hilleringmann, U.
    (2012). Surface tension and its role for vertical wet etching of silicon. <i>Journal
    of Micromechanics and Microengineering</i>, <i>22</i>(12), Article 125012. <a
    href="https://doi.org/10.1088/0960-1317/22/12/125012">https://doi.org/10.1088/0960-1317/22/12/125012</a>
  bibtex: '@article{Brockmeier_Rodriguez_Harrison_Hilleringmann_2012, title={Surface
    tension and its role for vertical wet etching of silicon}, volume={22}, DOI={<a
    href="https://doi.org/10.1088/0960-1317/22/12/125012">10.1088/0960-1317/22/12/125012</a>},
    number={12125012}, journal={Journal of Micromechanics and Microengineering}, publisher={IOP
    Publishing}, author={Brockmeier, A and Rodriguez, F J Santos and Harrison, M and
    Hilleringmann, Ulrich}, year={2012} }'
  chicago: Brockmeier, A, F J Santos Rodriguez, M Harrison, and Ulrich Hilleringmann.
    “Surface Tension and Its Role for Vertical Wet Etching of Silicon.” <i>Journal
    of Micromechanics and Microengineering</i> 22, no. 12 (2012). <a href="https://doi.org/10.1088/0960-1317/22/12/125012">https://doi.org/10.1088/0960-1317/22/12/125012</a>.
  ieee: 'A. Brockmeier, F. J. S. Rodriguez, M. Harrison, and U. Hilleringmann, “Surface
    tension and its role for vertical wet etching of silicon,” <i>Journal of Micromechanics
    and Microengineering</i>, vol. 22, no. 12, Art. no. 125012, 2012, doi: <a href="https://doi.org/10.1088/0960-1317/22/12/125012">10.1088/0960-1317/22/12/125012</a>.'
  mla: Brockmeier, A., et al. “Surface Tension and Its Role for Vertical Wet Etching
    of Silicon.” <i>Journal of Micromechanics and Microengineering</i>, vol. 22, no.
    12, 125012, IOP Publishing, 2012, doi:<a href="https://doi.org/10.1088/0960-1317/22/12/125012">10.1088/0960-1317/22/12/125012</a>.
  short: A. Brockmeier, F.J.S. Rodriguez, M. Harrison, U. Hilleringmann, Journal of
    Micromechanics and Microengineering 22 (2012).
date_created: 2023-01-24T11:54:56Z
date_updated: 2023-03-21T10:19:32Z
department:
- _id: '59'
doi: 10.1088/0960-1317/22/12/125012
intvolume: '        22'
issue: '12'
keyword:
- Electrical and Electronic Engineering
- Mechanical Engineering
- Mechanics of Materials
- Electronic
- Optical and Magnetic Materials
language:
- iso: eng
publication: Journal of Micromechanics and Microengineering
publication_identifier:
  issn:
  - 0960-1317
  - 1361-6439
publication_status: published
publisher: IOP Publishing
status: public
title: Surface tension and its role for vertical wet etching of silicon
type: journal_article
user_id: '20179'
volume: 22
year: '2012'
...
---
_id: '46512'
author:
- first_name: Kay-Peter
  full_name: Hoyer, Kay-Peter
  id: '48411'
  last_name: Hoyer
- first_name: Thomas
  full_name: Hassel, Thomas
  last_name: Hassel
- first_name: Friedrich-Wilhelm
  full_name: Bach, Friedrich-Wilhelm
  last_name: Bach
citation:
  ama: Hoyer K-P, Hassel T, Bach F-W. Einfluss der Oberflächenbehandlung auf das Korrosionsverhalten
    von Magnesiumlegierungen. <i>Materialwissenschaft und Werkstofftechnik</i>. 2012;43(12):1067-1073.
    doi:<a href="https://doi.org/10.1002/mawe.201200921">10.1002/mawe.201200921</a>
  apa: Hoyer, K.-P., Hassel, T., &#38; Bach, F.-W. (2012). Einfluss der Oberflächenbehandlung
    auf das Korrosionsverhalten von Magnesiumlegierungen. <i>Materialwissenschaft
    Und Werkstofftechnik</i>, <i>43</i>(12), 1067–1073. <a href="https://doi.org/10.1002/mawe.201200921">https://doi.org/10.1002/mawe.201200921</a>
  bibtex: '@article{Hoyer_Hassel_Bach_2012, title={Einfluss der Oberflächenbehandlung
    auf das Korrosionsverhalten von Magnesiumlegierungen}, volume={43}, DOI={<a href="https://doi.org/10.1002/mawe.201200921">10.1002/mawe.201200921</a>},
    number={12}, journal={Materialwissenschaft und Werkstofftechnik}, publisher={Wiley},
    author={Hoyer, Kay-Peter and Hassel, Thomas and Bach, Friedrich-Wilhelm}, year={2012},
    pages={1067–1073} }'
  chicago: 'Hoyer, Kay-Peter, Thomas Hassel, and Friedrich-Wilhelm Bach. “Einfluss
    Der Oberflächenbehandlung Auf Das Korrosionsverhalten von Magnesiumlegierungen.”
    <i>Materialwissenschaft Und Werkstofftechnik</i> 43, no. 12 (2012): 1067–73. <a
    href="https://doi.org/10.1002/mawe.201200921">https://doi.org/10.1002/mawe.201200921</a>.'
  ieee: 'K.-P. Hoyer, T. Hassel, and F.-W. Bach, “Einfluss der Oberflächenbehandlung
    auf das Korrosionsverhalten von Magnesiumlegierungen,” <i>Materialwissenschaft
    und Werkstofftechnik</i>, vol. 43, no. 12, pp. 1067–1073, 2012, doi: <a href="https://doi.org/10.1002/mawe.201200921">10.1002/mawe.201200921</a>.'
  mla: Hoyer, Kay-Peter, et al. “Einfluss Der Oberflächenbehandlung Auf Das Korrosionsverhalten
    von Magnesiumlegierungen.” <i>Materialwissenschaft Und Werkstofftechnik</i>, vol.
    43, no. 12, Wiley, 2012, pp. 1067–73, doi:<a href="https://doi.org/10.1002/mawe.201200921">10.1002/mawe.201200921</a>.
  short: K.-P. Hoyer, T. Hassel, F.-W. Bach, Materialwissenschaft Und Werkstofftechnik
    43 (2012) 1067–1073.
date_created: 2023-08-16T06:53:04Z
date_updated: 2023-08-16T07:00:17Z
department:
- _id: '9'
- _id: '158'
doi: 10.1002/mawe.201200921
extern: '1'
intvolume: '        43'
issue: '12'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- Condensed Matter Physics
- General Materials Science
language:
- iso: eng
page: 1067-1073
publication: Materialwissenschaft und Werkstofftechnik
publication_identifier:
  issn:
  - 0933-5137
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: Einfluss der Oberflächenbehandlung auf das Korrosionsverhalten von Magnesiumlegierungen
type: journal_article
user_id: '48411'
volume: 43
year: '2012'
...
---
_id: '46511'
author:
- first_name: Florian
  full_name: Waltz, Florian
  last_name: Waltz
- first_name: Mark A.
  full_name: Swider, Mark A.
  last_name: Swider
- first_name: Kay-Peter
  full_name: Hoyer, Kay-Peter
  id: '48411'
  last_name: Hoyer
- first_name: Thomas
  full_name: Hassel, Thomas
  last_name: Hassel
- first_name: Martin
  full_name: Erne, Martin
  last_name: Erne
- first_name: Kai
  full_name: Möhwald, Kai
  last_name: Möhwald
- first_name: Matthias
  full_name: Adlung, Matthias
  last_name: Adlung
- first_name: Armin
  full_name: Feldhoff, Armin
  last_name: Feldhoff
- first_name: Claudia
  full_name: Wickleder, Claudia
  last_name: Wickleder
- first_name: Friedrich-Wilhelm
  full_name: Bach, Friedrich-Wilhelm
  last_name: Bach
- first_name: Peter
  full_name: Behrens, Peter
  last_name: Behrens
citation:
  ama: Waltz F, Swider MA, Hoyer K-P, et al. Synthesis of highly stable magnesium
    fluoride suspensions and their application in the corrosion protection of a Magnesium
    alloy. <i>Journal of Materials Science</i>. 2011;47(1):176-183. doi:<a href="https://doi.org/10.1007/s10853-011-5785-0">10.1007/s10853-011-5785-0</a>
  apa: Waltz, F., Swider, M. A., Hoyer, K.-P., Hassel, T., Erne, M., Möhwald, K.,
    Adlung, M., Feldhoff, A., Wickleder, C., Bach, F.-W., &#38; Behrens, P. (2011).
    Synthesis of highly stable magnesium fluoride suspensions and their application
    in the corrosion protection of a Magnesium alloy. <i>Journal of Materials Science</i>,
    <i>47</i>(1), 176–183. <a href="https://doi.org/10.1007/s10853-011-5785-0">https://doi.org/10.1007/s10853-011-5785-0</a>
  bibtex: '@article{Waltz_Swider_Hoyer_Hassel_Erne_Möhwald_Adlung_Feldhoff_Wickleder_Bach_et
    al._2011, title={Synthesis of highly stable magnesium fluoride suspensions and
    their application in the corrosion protection of a Magnesium alloy}, volume={47},
    DOI={<a href="https://doi.org/10.1007/s10853-011-5785-0">10.1007/s10853-011-5785-0</a>},
    number={1}, journal={Journal of Materials Science}, publisher={Springer Science
    and Business Media LLC}, author={Waltz, Florian and Swider, Mark A. and Hoyer,
    Kay-Peter and Hassel, Thomas and Erne, Martin and Möhwald, Kai and Adlung, Matthias
    and Feldhoff, Armin and Wickleder, Claudia and Bach, Friedrich-Wilhelm and et
    al.}, year={2011}, pages={176–183} }'
  chicago: 'Waltz, Florian, Mark A. Swider, Kay-Peter Hoyer, Thomas Hassel, Martin
    Erne, Kai Möhwald, Matthias Adlung, et al. “Synthesis of Highly Stable Magnesium
    Fluoride Suspensions and Their Application in the Corrosion Protection of a Magnesium
    Alloy.” <i>Journal of Materials Science</i> 47, no. 1 (2011): 176–83. <a href="https://doi.org/10.1007/s10853-011-5785-0">https://doi.org/10.1007/s10853-011-5785-0</a>.'
  ieee: 'F. Waltz <i>et al.</i>, “Synthesis of highly stable magnesium fluoride suspensions
    and their application in the corrosion protection of a Magnesium alloy,” <i>Journal
    of Materials Science</i>, vol. 47, no. 1, pp. 176–183, 2011, doi: <a href="https://doi.org/10.1007/s10853-011-5785-0">10.1007/s10853-011-5785-0</a>.'
  mla: Waltz, Florian, et al. “Synthesis of Highly Stable Magnesium Fluoride Suspensions
    and Their Application in the Corrosion Protection of a Magnesium Alloy.” <i>Journal
    of Materials Science</i>, vol. 47, no. 1, Springer Science and Business Media
    LLC, 2011, pp. 176–83, doi:<a href="https://doi.org/10.1007/s10853-011-5785-0">10.1007/s10853-011-5785-0</a>.
  short: F. Waltz, M.A. Swider, K.-P. Hoyer, T. Hassel, M. Erne, K. Möhwald, M. Adlung,
    A. Feldhoff, C. Wickleder, F.-W. Bach, P. Behrens, Journal of Materials Science
    47 (2011) 176–183.
date_created: 2023-08-16T06:47:15Z
date_updated: 2023-08-16T07:00:20Z
department:
- _id: '9'
- _id: '158'
doi: 10.1007/s10853-011-5785-0
extern: '1'
intvolume: '        47'
issue: '1'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- General Materials Science
language:
- iso: eng
page: 176-183
publication: Journal of Materials Science
publication_identifier:
  issn:
  - 0022-2461
  - 1573-4803
publication_status: published
publisher: Springer Science and Business Media LLC
quality_controlled: '1'
status: public
title: Synthesis of highly stable magnesium fluoride suspensions and their application
  in the corrosion protection of a Magnesium alloy
type: journal_article
user_id: '48411'
volume: 47
year: '2011'
...
---
_id: '39980'
author:
- first_name: Marcus W.
  full_name: Lauhof, Marcus W.
  last_name: Lauhof
- first_name: Stephan A.
  full_name: Benning, Stephan A.
  last_name: Benning
- first_name: Heinz-Siegfried
  full_name: Kitzerow, Heinz-Siegfried
  id: '254'
  last_name: Kitzerow
- first_name: Volkmar
  full_name: Vill, Volkmar
  last_name: Vill
- first_name: Felix
  full_name: Scheliga, Felix
  last_name: Scheliga
- first_name: Emma
  full_name: Thorn-Csányi, Emma
  last_name: Thorn-Csányi
citation:
  ama: Lauhof MW, Benning SA, Kitzerow H-S, Vill V, Scheliga F, Thorn-Csányi E. Dichroic
    photo- and electroluminescence of oligo p-(phenylene vinylene) derivatives. <i>Synthetic
    Metals</i>. 2007;157(4-5):222-227. doi:<a href="https://doi.org/10.1016/j.synthmet.2007.01.015">10.1016/j.synthmet.2007.01.015</a>
  apa: Lauhof, M. W., Benning, S. A., Kitzerow, H.-S., Vill, V., Scheliga, F., &#38;
    Thorn-Csányi, E. (2007). Dichroic photo- and electroluminescence of oligo p-(phenylene
    vinylene) derivatives. <i>Synthetic Metals</i>, <i>157</i>(4–5), 222–227. <a href="https://doi.org/10.1016/j.synthmet.2007.01.015">https://doi.org/10.1016/j.synthmet.2007.01.015</a>
  bibtex: '@article{Lauhof_Benning_Kitzerow_Vill_Scheliga_Thorn-Csányi_2007, title={Dichroic
    photo- and electroluminescence of oligo p-(phenylene vinylene) derivatives}, volume={157},
    DOI={<a href="https://doi.org/10.1016/j.synthmet.2007.01.015">10.1016/j.synthmet.2007.01.015</a>},
    number={4–5}, journal={Synthetic Metals}, publisher={Elsevier BV}, author={Lauhof,
    Marcus W. and Benning, Stephan A. and Kitzerow, Heinz-Siegfried and Vill, Volkmar
    and Scheliga, Felix and Thorn-Csányi, Emma}, year={2007}, pages={222–227} }'
  chicago: 'Lauhof, Marcus W., Stephan A. Benning, Heinz-Siegfried Kitzerow, Volkmar
    Vill, Felix Scheliga, and Emma Thorn-Csányi. “Dichroic Photo- and Electroluminescence
    of Oligo p-(Phenylene Vinylene) Derivatives.” <i>Synthetic Metals</i> 157, no.
    4–5 (2007): 222–27. <a href="https://doi.org/10.1016/j.synthmet.2007.01.015">https://doi.org/10.1016/j.synthmet.2007.01.015</a>.'
  ieee: 'M. W. Lauhof, S. A. Benning, H.-S. Kitzerow, V. Vill, F. Scheliga, and E.
    Thorn-Csányi, “Dichroic photo- and electroluminescence of oligo p-(phenylene vinylene)
    derivatives,” <i>Synthetic Metals</i>, vol. 157, no. 4–5, pp. 222–227, 2007, doi:
    <a href="https://doi.org/10.1016/j.synthmet.2007.01.015">10.1016/j.synthmet.2007.01.015</a>.'
  mla: Lauhof, Marcus W., et al. “Dichroic Photo- and Electroluminescence of Oligo
    p-(Phenylene Vinylene) Derivatives.” <i>Synthetic Metals</i>, vol. 157, no. 4–5,
    Elsevier BV, 2007, pp. 222–27, doi:<a href="https://doi.org/10.1016/j.synthmet.2007.01.015">10.1016/j.synthmet.2007.01.015</a>.
  short: M.W. Lauhof, S.A. Benning, H.-S. Kitzerow, V. Vill, F. Scheliga, E. Thorn-Csányi,
    Synthetic Metals 157 (2007) 222–227.
date_created: 2023-01-25T11:57:30Z
date_updated: 2023-01-25T12:09:50Z
department:
- _id: '313'
- _id: '638'
doi: 10.1016/j.synthmet.2007.01.015
intvolume: '       157'
issue: 4-5
keyword:
- Materials Chemistry
- Metals and Alloys
- Mechanical Engineering
- Mechanics of Materials
- Condensed Matter Physics
- Electronic
- Optical and Magnetic Materials
language:
- iso: eng
page: 222-227
publication: Synthetic Metals
publication_identifier:
  issn:
  - 0379-6779
publication_status: published
publisher: Elsevier BV
status: public
title: Dichroic photo- and electroluminescence of oligo p-(phenylene vinylene) derivatives
type: journal_article
user_id: '254'
volume: 157
year: '2007'
...
---
_id: '29682'
author:
- first_name: A.
  full_name: Hütten, A.
  last_name: Hütten
- first_name: J.
  full_name: Schmalhorst, J.
  last_name: Schmalhorst
- first_name: A.
  full_name: Thomas, A.
  last_name: Thomas
- first_name: S.
  full_name: Kämmerer, S.
  last_name: Kämmerer
- first_name: Marc
  full_name: Sacher, Marc
  id: '26883'
  last_name: Sacher
  orcid: 0000-0001-6217-336X
- first_name: D.
  full_name: Ebke, D.
  last_name: Ebke
- first_name: N.-N.
  full_name: Liu, N.-N.
  last_name: Liu
- first_name: X.
  full_name: Kou, X.
  last_name: Kou
- first_name: G.
  full_name: Reiss, G.
  last_name: Reiss
citation:
  ama: Hütten A, Schmalhorst J, Thomas A, et al. Spin-electronic devices with half-metallic
    Heusler alloys. <i>Journal of Alloys and Compounds</i>. 2006;423(1-2):148-152.
    doi:<a href="https://doi.org/10.1016/j.jallcom.2005.12.106">10.1016/j.jallcom.2005.12.106</a>
  apa: Hütten, A., Schmalhorst, J., Thomas, A., Kämmerer, S., Sacher, M., Ebke, D.,
    Liu, N.-N., Kou, X., &#38; Reiss, G. (2006). Spin-electronic devices with half-metallic
    Heusler alloys. <i>Journal of Alloys and Compounds</i>, <i>423</i>(1–2), 148–152.
    <a href="https://doi.org/10.1016/j.jallcom.2005.12.106">https://doi.org/10.1016/j.jallcom.2005.12.106</a>
  bibtex: '@article{Hütten_Schmalhorst_Thomas_Kämmerer_Sacher_Ebke_Liu_Kou_Reiss_2006,
    title={Spin-electronic devices with half-metallic Heusler alloys}, volume={423},
    DOI={<a href="https://doi.org/10.1016/j.jallcom.2005.12.106">10.1016/j.jallcom.2005.12.106</a>},
    number={1–2}, journal={Journal of Alloys and Compounds}, publisher={Elsevier BV},
    author={Hütten, A. and Schmalhorst, J. and Thomas, A. and Kämmerer, S. and Sacher,
    Marc and Ebke, D. and Liu, N.-N. and Kou, X. and Reiss, G.}, year={2006}, pages={148–152}
    }'
  chicago: 'Hütten, A., J. Schmalhorst, A. Thomas, S. Kämmerer, Marc Sacher, D. Ebke,
    N.-N. Liu, X. Kou, and G. Reiss. “Spin-Electronic Devices with Half-Metallic Heusler
    Alloys.” <i>Journal of Alloys and Compounds</i> 423, no. 1–2 (2006): 148–52. <a
    href="https://doi.org/10.1016/j.jallcom.2005.12.106">https://doi.org/10.1016/j.jallcom.2005.12.106</a>.'
  ieee: 'A. Hütten <i>et al.</i>, “Spin-electronic devices with half-metallic Heusler
    alloys,” <i>Journal of Alloys and Compounds</i>, vol. 423, no. 1–2, pp. 148–152,
    2006, doi: <a href="https://doi.org/10.1016/j.jallcom.2005.12.106">10.1016/j.jallcom.2005.12.106</a>.'
  mla: Hütten, A., et al. “Spin-Electronic Devices with Half-Metallic Heusler Alloys.”
    <i>Journal of Alloys and Compounds</i>, vol. 423, no. 1–2, Elsevier BV, 2006,
    pp. 148–52, doi:<a href="https://doi.org/10.1016/j.jallcom.2005.12.106">10.1016/j.jallcom.2005.12.106</a>.
  short: A. Hütten, J. Schmalhorst, A. Thomas, S. Kämmerer, M. Sacher, D. Ebke, N.-N.
    Liu, X. Kou, G. Reiss, Journal of Alloys and Compounds 423 (2006) 148–152.
date_created: 2022-01-31T10:15:23Z
date_updated: 2024-04-23T12:18:38Z
department:
- _id: '15'
doi: 10.1016/j.jallcom.2005.12.106
extern: '1'
intvolume: '       423'
issue: 1-2
keyword:
- Materials Chemistry
- Metals and Alloys
- Mechanical Engineering
- Mechanics of Materials
language:
- iso: eng
page: 148-152
publication: Journal of Alloys and Compounds
publication_identifier:
  issn:
  - 0925-8388
publication_status: published
publisher: Elsevier BV
status: public
title: Spin-electronic devices with half-metallic Heusler alloys
type: journal_article
user_id: '26883'
volume: 423
year: '2006'
...
---
_id: '39846'
abstract:
- lang: eng
  text: <jats:p>This article reports degradation experiments on organic thin film
    transistors using the small organic molecule pentacene as the semiconducting material.
    Starting with degradation inert <jats:italic>p</jats:italic>-type silicon wafers
    as the substrate and SiO<jats:sub>2</jats:sub> as the gate dielectric, we show
    the influence of temperature and exposure to ambient air on the charge carrier
    field-effect mobility, on-off-ratio, and threshold-voltage. The devices were found
    to have unambiguously degraded over 3 orders of magnitude in maximum on-current
    and charge carrier field-effect mobility, but they still operated after a period
    of 9 months in ambient air conditions. A thermal treatment was carried out in
    vacuum conditions and revealed a degradation of the charge carrier field-effect
    mobility, maximum on-current, and threshold voltage.</jats:p>
author:
- first_name: Ch.
  full_name: Pannemann, Ch.
  last_name: Pannemann
- first_name: T.
  full_name: Diekmann, T.
  last_name: Diekmann
- first_name: Ulrich
  full_name: Hilleringmann, Ulrich
  id: '20179'
  last_name: Hilleringmann
citation:
  ama: Pannemann Ch, Diekmann T, Hilleringmann U. Degradation of organic field-effect
    transistors made of pentacene. <i>Journal of Materials Research</i>. 2005;19(7):1999-2002.
    doi:<a href="https://doi.org/10.1557/jmr.2004.0267">10.1557/jmr.2004.0267</a>
  apa: Pannemann, Ch., Diekmann, T., &#38; Hilleringmann, U. (2005). Degradation of
    organic field-effect transistors made of pentacene. <i>Journal of Materials Research</i>,
    <i>19</i>(7), 1999–2002. <a href="https://doi.org/10.1557/jmr.2004.0267">https://doi.org/10.1557/jmr.2004.0267</a>
  bibtex: '@article{Pannemann_Diekmann_Hilleringmann_2005, title={Degradation of organic
    field-effect transistors made of pentacene}, volume={19}, DOI={<a href="https://doi.org/10.1557/jmr.2004.0267">10.1557/jmr.2004.0267</a>},
    number={7}, journal={Journal of Materials Research}, publisher={Springer Science
    and Business Media LLC}, author={Pannemann, Ch. and Diekmann, T. and Hilleringmann,
    Ulrich}, year={2005}, pages={1999–2002} }'
  chicago: 'Pannemann, Ch., T. Diekmann, and Ulrich Hilleringmann. “Degradation of
    Organic Field-Effect Transistors Made of Pentacene.” <i>Journal of Materials Research</i>
    19, no. 7 (2005): 1999–2002. <a href="https://doi.org/10.1557/jmr.2004.0267">https://doi.org/10.1557/jmr.2004.0267</a>.'
  ieee: 'Ch. Pannemann, T. Diekmann, and U. Hilleringmann, “Degradation of organic
    field-effect transistors made of pentacene,” <i>Journal of Materials Research</i>,
    vol. 19, no. 7, pp. 1999–2002, 2005, doi: <a href="https://doi.org/10.1557/jmr.2004.0267">10.1557/jmr.2004.0267</a>.'
  mla: Pannemann, Ch., et al. “Degradation of Organic Field-Effect Transistors Made
    of Pentacene.” <i>Journal of Materials Research</i>, vol. 19, no. 7, Springer
    Science and Business Media LLC, 2005, pp. 1999–2002, doi:<a href="https://doi.org/10.1557/jmr.2004.0267">10.1557/jmr.2004.0267</a>.
  short: Ch. Pannemann, T. Diekmann, U. Hilleringmann, Journal of Materials Research
    19 (2005) 1999–2002.
date_created: 2023-01-25T08:37:47Z
date_updated: 2023-03-21T10:06:18Z
department:
- _id: '59'
doi: 10.1557/jmr.2004.0267
intvolume: '        19'
issue: '7'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- Condensed Matter Physics
- General Materials Science
language:
- iso: eng
page: 1999-2002
publication: Journal of Materials Research
publication_identifier:
  issn:
  - 0884-2914
  - 2044-5326
publication_status: published
publisher: Springer Science and Business Media LLC
status: public
title: Degradation of organic field-effect transistors made of pentacene
type: journal_article
user_id: '20179'
volume: 19
year: '2005'
...
---
_id: '39349'
abstract:
- lang: eng
  text: <jats:p>This article reports degradation experiments on organic thin film
    transistors using the small organic molecule pentacene as the semiconducting material.
    Starting with degradation inert <jats:italic>p</jats:italic>-type silicon wafers
    as the substrate and SiO<jats:sub>2</jats:sub> as the gate dielectric, we show
    the influence of temperature and exposure to ambient air on the charge carrier
    field-effect mobility, on-off-ratio, and threshold-voltage. The devices were found
    to have unambiguously degraded over 3 orders of magnitude in maximum on-current
    and charge carrier field-effect mobility, but they still operated after a period
    of 9 months in ambient air conditions. A thermal treatment was carried out in
    vacuum conditions and revealed a degradation of the charge carrier field-effect
    mobility, maximum on-current, and threshold voltage.</jats:p>
author:
- first_name: Ch.
  full_name: Pannemann, Ch.
  last_name: Pannemann
- first_name: T.
  full_name: Diekmann, T.
  last_name: Diekmann
- first_name: Ulrich
  full_name: Hilleringmann, Ulrich
  id: '20179'
  last_name: Hilleringmann
citation:
  ama: Pannemann Ch, Diekmann T, Hilleringmann U. Degradation of organic field-effect
    transistors made of pentacene. <i>Journal of Materials Research</i>. 2005;19(7):1999-2002.
    doi:<a href="https://doi.org/10.1557/jmr.2004.0267">10.1557/jmr.2004.0267</a>
  apa: Pannemann, Ch., Diekmann, T., &#38; Hilleringmann, U. (2005). Degradation of
    organic field-effect transistors made of pentacene. <i>Journal of Materials Research</i>,
    <i>19</i>(7), 1999–2002. <a href="https://doi.org/10.1557/jmr.2004.0267">https://doi.org/10.1557/jmr.2004.0267</a>
  bibtex: '@article{Pannemann_Diekmann_Hilleringmann_2005, title={Degradation of organic
    field-effect transistors made of pentacene}, volume={19}, DOI={<a href="https://doi.org/10.1557/jmr.2004.0267">10.1557/jmr.2004.0267</a>},
    number={7}, journal={Journal of Materials Research}, publisher={Springer Science
    and Business Media LLC}, author={Pannemann, Ch. and Diekmann, T. and Hilleringmann,
    Ulrich}, year={2005}, pages={1999–2002} }'
  chicago: 'Pannemann, Ch., T. Diekmann, and Ulrich Hilleringmann. “Degradation of
    Organic Field-Effect Transistors Made of Pentacene.” <i>Journal of Materials Research</i>
    19, no. 7 (2005): 1999–2002. <a href="https://doi.org/10.1557/jmr.2004.0267">https://doi.org/10.1557/jmr.2004.0267</a>.'
  ieee: 'Ch. Pannemann, T. Diekmann, and U. Hilleringmann, “Degradation of organic
    field-effect transistors made of pentacene,” <i>Journal of Materials Research</i>,
    vol. 19, no. 7, pp. 1999–2002, 2005, doi: <a href="https://doi.org/10.1557/jmr.2004.0267">10.1557/jmr.2004.0267</a>.'
  mla: Pannemann, Ch., et al. “Degradation of Organic Field-Effect Transistors Made
    of Pentacene.” <i>Journal of Materials Research</i>, vol. 19, no. 7, Springer
    Science and Business Media LLC, 2005, pp. 1999–2002, doi:<a href="https://doi.org/10.1557/jmr.2004.0267">10.1557/jmr.2004.0267</a>.
  short: Ch. Pannemann, T. Diekmann, U. Hilleringmann, Journal of Materials Research
    19 (2005) 1999–2002.
date_created: 2023-01-24T09:24:41Z
date_updated: 2023-03-22T10:38:56Z
department:
- _id: '59'
doi: 10.1557/jmr.2004.0267
intvolume: '        19'
issue: '7'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- Condensed Matter Physics
- General Materials Science
language:
- iso: eng
page: 1999-2002
publication: Journal of Materials Research
publication_identifier:
  issn:
  - 0884-2914
  - 2044-5326
publication_status: published
publisher: Springer Science and Business Media LLC
status: public
title: Degradation of organic field-effect transistors made of pentacene
type: journal_article
user_id: '20179'
volume: 19
year: '2005'
...
---
_id: '35359'
article_type: original
author:
- first_name: Ryan J.
  full_name: Cormier, Ryan J.
  last_name: Cormier
- first_name: Claudia
  full_name: Schmidt, Claudia
  id: '466'
  last_name: Schmidt
  orcid: 0000-0003-3179-9997
- first_name: Paul T.
  full_name: Callaghan, Paul T.
  last_name: Callaghan
citation:
  ama: Cormier RJ, Schmidt C, Callaghan PT. Director reorientation of a side-chain
    liquid crystalline polymer under extensional flow. <i>Journal of Rheology</i>.
    2004;48(4):881-894. doi:<a href="https://doi.org/10.1122/1.1753278">10.1122/1.1753278</a>
  apa: Cormier, R. J., Schmidt, C., &#38; Callaghan, P. T. (2004). Director reorientation
    of a side-chain liquid crystalline polymer under extensional flow. <i>Journal
    of Rheology</i>, <i>48</i>(4), 881–894. <a href="https://doi.org/10.1122/1.1753278">https://doi.org/10.1122/1.1753278</a>
  bibtex: '@article{Cormier_Schmidt_Callaghan_2004, title={Director reorientation
    of a side-chain liquid crystalline polymer under extensional flow}, volume={48},
    DOI={<a href="https://doi.org/10.1122/1.1753278">10.1122/1.1753278</a>}, number={4},
    journal={Journal of Rheology}, publisher={Society of Rheology}, author={Cormier,
    Ryan J. and Schmidt, Claudia and Callaghan, Paul T.}, year={2004}, pages={881–894}
    }'
  chicago: 'Cormier, Ryan J., Claudia Schmidt, and Paul T. Callaghan. “Director Reorientation
    of a Side-Chain Liquid Crystalline Polymer under Extensional Flow.” <i>Journal
    of Rheology</i> 48, no. 4 (2004): 881–94. <a href="https://doi.org/10.1122/1.1753278">https://doi.org/10.1122/1.1753278</a>.'
  ieee: 'R. J. Cormier, C. Schmidt, and P. T. Callaghan, “Director reorientation of
    a side-chain liquid crystalline polymer under extensional flow,” <i>Journal of
    Rheology</i>, vol. 48, no. 4, pp. 881–894, 2004, doi: <a href="https://doi.org/10.1122/1.1753278">10.1122/1.1753278</a>.'
  mla: Cormier, Ryan J., et al. “Director Reorientation of a Side-Chain Liquid Crystalline
    Polymer under Extensional Flow.” <i>Journal of Rheology</i>, vol. 48, no. 4, Society
    of Rheology, 2004, pp. 881–94, doi:<a href="https://doi.org/10.1122/1.1753278">10.1122/1.1753278</a>.
  short: R.J. Cormier, C. Schmidt, P.T. Callaghan, Journal of Rheology 48 (2004) 881–894.
date_created: 2023-01-06T13:15:08Z
date_updated: 2023-01-07T11:23:31Z
department:
- _id: '2'
- _id: '315'
doi: 10.1122/1.1753278
intvolume: '        48'
issue: '4'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- Condensed Matter Physics
- General Materials Science
language:
- iso: eng
page: 881-894
publication: Journal of Rheology
publication_identifier:
  issn:
  - 0148-6055
  - 1520-8516
publication_status: published
publisher: Society of Rheology
quality_controlled: '1'
status: public
title: Director reorientation of a side-chain liquid crystalline polymer under extensional
  flow
type: journal_article
user_id: '466'
volume: 48
year: '2004'
...
---
_id: '39985'
author:
- first_name: T
  full_name: Röder, T
  last_name: Röder
- first_name: Heinz-Siegfried
  full_name: Kitzerow, Heinz-Siegfried
  id: '254'
  last_name: Kitzerow
- first_name: J.C
  full_name: Hummelen, J.C
  last_name: Hummelen
citation:
  ama: Röder T, Kitzerow H-S, Hummelen JC. Morphology and fluorescence quenching in
    photovoltaic samples containing fullerene and poly(p-phenylene-vinylene) derivatives.
    <i>Synthetic Metals</i>. 2003;141(3):271-275. doi:<a href="https://doi.org/10.1016/s0379-6779(03)00412-0">10.1016/s0379-6779(03)00412-0</a>
  apa: Röder, T., Kitzerow, H.-S., &#38; Hummelen, J. C. (2003). Morphology and fluorescence
    quenching in photovoltaic samples containing fullerene and poly(p-phenylene-vinylene)
    derivatives. <i>Synthetic Metals</i>, <i>141</i>(3), 271–275. <a href="https://doi.org/10.1016/s0379-6779(03)00412-0">https://doi.org/10.1016/s0379-6779(03)00412-0</a>
  bibtex: '@article{Röder_Kitzerow_Hummelen_2003, title={Morphology and fluorescence
    quenching in photovoltaic samples containing fullerene and poly(p-phenylene-vinylene)
    derivatives}, volume={141}, DOI={<a href="https://doi.org/10.1016/s0379-6779(03)00412-0">10.1016/s0379-6779(03)00412-0</a>},
    number={3}, journal={Synthetic Metals}, publisher={Elsevier BV}, author={Röder,
    T and Kitzerow, Heinz-Siegfried and Hummelen, J.C}, year={2003}, pages={271–275}
    }'
  chicago: 'Röder, T, Heinz-Siegfried Kitzerow, and J.C Hummelen. “Morphology and
    Fluorescence Quenching in Photovoltaic Samples Containing Fullerene and Poly(p-Phenylene-Vinylene)
    Derivatives.” <i>Synthetic Metals</i> 141, no. 3 (2003): 271–75. <a href="https://doi.org/10.1016/s0379-6779(03)00412-0">https://doi.org/10.1016/s0379-6779(03)00412-0</a>.'
  ieee: 'T. Röder, H.-S. Kitzerow, and J. C. Hummelen, “Morphology and fluorescence
    quenching in photovoltaic samples containing fullerene and poly(p-phenylene-vinylene)
    derivatives,” <i>Synthetic Metals</i>, vol. 141, no. 3, pp. 271–275, 2003, doi:
    <a href="https://doi.org/10.1016/s0379-6779(03)00412-0">10.1016/s0379-6779(03)00412-0</a>.'
  mla: Röder, T., et al. “Morphology and Fluorescence Quenching in Photovoltaic Samples
    Containing Fullerene and Poly(p-Phenylene-Vinylene) Derivatives.” <i>Synthetic
    Metals</i>, vol. 141, no. 3, Elsevier BV, 2003, pp. 271–75, doi:<a href="https://doi.org/10.1016/s0379-6779(03)00412-0">10.1016/s0379-6779(03)00412-0</a>.
  short: T. Röder, H.-S. Kitzerow, J.C. Hummelen, Synthetic Metals 141 (2003) 271–275.
date_created: 2023-01-25T12:06:23Z
date_updated: 2023-01-25T12:09:38Z
department:
- _id: '313'
- _id: '638'
doi: 10.1016/s0379-6779(03)00412-0
intvolume: '       141'
issue: '3'
keyword:
- Materials Chemistry
- Metals and Alloys
- Mechanical Engineering
- Mechanics of Materials
- Condensed Matter Physics
- Electronic
- Optical and Magnetic Materials
language:
- iso: eng
page: 271-275
publication: Synthetic Metals
publication_identifier:
  issn:
  - 0379-6779
publication_status: published
publisher: Elsevier BV
status: public
title: Morphology and fluorescence quenching in photovoltaic samples containing fullerene
  and poly(p-phenylene-vinylene) derivatives
type: journal_article
user_id: '254'
volume: 141
year: '2003'
...
---
_id: '45307'
author:
- first_name: Rolf
  full_name: Mahnken, Rolf
  id: '335'
  last_name: Mahnken
citation:
  ama: Mahnken R. Strength difference in compression and tension and pressure dependence
    of yielding in elasto-plasticity. <i>Computer Methods in Applied Mechanics and
    Engineering</i>. 2002;190(39):5057-5080. doi:<a href="https://doi.org/10.1016/s0045-7825(00)00364-9">10.1016/s0045-7825(00)00364-9</a>
  apa: Mahnken, R. (2002). Strength difference in compression and tension and pressure
    dependence of yielding in elasto-plasticity. <i>Computer Methods in Applied Mechanics
    and Engineering</i>, <i>190</i>(39), 5057–5080. <a href="https://doi.org/10.1016/s0045-7825(00)00364-9">https://doi.org/10.1016/s0045-7825(00)00364-9</a>
  bibtex: '@article{Mahnken_2002, title={Strength difference in compression and tension
    and pressure dependence of yielding in elasto-plasticity}, volume={190}, DOI={<a
    href="https://doi.org/10.1016/s0045-7825(00)00364-9">10.1016/s0045-7825(00)00364-9</a>},
    number={39}, journal={Computer Methods in Applied Mechanics and Engineering},
    publisher={Elsevier BV}, author={Mahnken, Rolf}, year={2002}, pages={5057–5080}
    }'
  chicago: 'Mahnken, Rolf. “Strength Difference in Compression and Tension and Pressure
    Dependence of Yielding in Elasto-Plasticity.” <i>Computer Methods in Applied Mechanics
    and Engineering</i> 190, no. 39 (2002): 5057–80. <a href="https://doi.org/10.1016/s0045-7825(00)00364-9">https://doi.org/10.1016/s0045-7825(00)00364-9</a>.'
  ieee: 'R. Mahnken, “Strength difference in compression and tension and pressure
    dependence of yielding in elasto-plasticity,” <i>Computer Methods in Applied Mechanics
    and Engineering</i>, vol. 190, no. 39, pp. 5057–5080, 2002, doi: <a href="https://doi.org/10.1016/s0045-7825(00)00364-9">10.1016/s0045-7825(00)00364-9</a>.'
  mla: Mahnken, Rolf. “Strength Difference in Compression and Tension and Pressure
    Dependence of Yielding in Elasto-Plasticity.” <i>Computer Methods in Applied Mechanics
    and Engineering</i>, vol. 190, no. 39, Elsevier BV, 2002, pp. 5057–80, doi:<a
    href="https://doi.org/10.1016/s0045-7825(00)00364-9">10.1016/s0045-7825(00)00364-9</a>.
  short: R. Mahnken, Computer Methods in Applied Mechanics and Engineering 190 (2002)
    5057–5080.
date_created: 2023-05-26T12:21:04Z
date_updated: 2023-05-26T12:22:12Z
department:
- _id: '9'
- _id: '154'
doi: 10.1016/s0045-7825(00)00364-9
intvolume: '       190'
issue: '39'
keyword:
- Computer Science Applications
- General Physics and Astronomy
- Mechanical Engineering
- Mechanics of Materials
- Computational Mechanics
language:
- iso: eng
page: 5057-5080
publication: Computer Methods in Applied Mechanics and Engineering
publication_identifier:
  issn:
  - 0045-7825
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Strength difference in compression and tension and pressure dependence of yielding
  in elasto-plasticity
type: journal_article
user_id: '335'
volume: 190
year: '2002'
...
---
_id: '45413'
author:
- first_name: Rolf
  full_name: Mahnken, Rolf
  id: '335'
  last_name: Mahnken
- first_name: P.
  full_name: Steinmann, P.
  last_name: Steinmann
citation:
  ama: Mahnken R, Steinmann P. A finite element algorithm for parameter identification
    of material models for fluid saturated porous media. <i>International Journal
    for Numerical and Analytical Methods in Geomechanics</i>. 2002;25(5):415-434.
    doi:<a href="https://doi.org/10.1002/nag.136">10.1002/nag.136</a>
  apa: Mahnken, R., &#38; Steinmann, P. (2002). A finite element algorithm for parameter
    identification of material models for fluid saturated porous media. <i>International
    Journal for Numerical and Analytical Methods in Geomechanics</i>, <i>25</i>(5),
    415–434. <a href="https://doi.org/10.1002/nag.136">https://doi.org/10.1002/nag.136</a>
  bibtex: '@article{Mahnken_Steinmann_2002, title={A finite element algorithm for
    parameter identification of material models for fluid saturated porous media},
    volume={25}, DOI={<a href="https://doi.org/10.1002/nag.136">10.1002/nag.136</a>},
    number={5}, journal={International Journal for Numerical and Analytical Methods
    in Geomechanics}, publisher={Wiley}, author={Mahnken, Rolf and Steinmann, P.},
    year={2002}, pages={415–434} }'
  chicago: 'Mahnken, Rolf, and P. Steinmann. “A Finite Element Algorithm for Parameter
    Identification of Material Models for Fluid Saturated Porous Media.” <i>International
    Journal for Numerical and Analytical Methods in Geomechanics</i> 25, no. 5 (2002):
    415–34. <a href="https://doi.org/10.1002/nag.136">https://doi.org/10.1002/nag.136</a>.'
  ieee: 'R. Mahnken and P. Steinmann, “A finite element algorithm for parameter identification
    of material models for fluid saturated porous media,” <i>International Journal
    for Numerical and Analytical Methods in Geomechanics</i>, vol. 25, no. 5, pp.
    415–434, 2002, doi: <a href="https://doi.org/10.1002/nag.136">10.1002/nag.136</a>.'
  mla: Mahnken, Rolf, and P. Steinmann. “A Finite Element Algorithm for Parameter
    Identification of Material Models for Fluid Saturated Porous Media.” <i>International
    Journal for Numerical and Analytical Methods in Geomechanics</i>, vol. 25, no.
    5, Wiley, 2002, pp. 415–34, doi:<a href="https://doi.org/10.1002/nag.136">10.1002/nag.136</a>.
  short: R. Mahnken, P. Steinmann, International Journal for Numerical and Analytical
    Methods in Geomechanics 25 (2002) 415–434.
date_created: 2023-05-31T11:55:35Z
date_updated: 2023-05-31T11:55:54Z
department:
- _id: '9'
- _id: '154'
doi: 10.1002/nag.136
intvolume: '        25'
issue: '5'
keyword:
- Mechanics of Materials
- Geotechnical Engineering and Engineering Geology
- General Materials Science
- Computational Mechanics
language:
- iso: eng
page: 415-434
publication: International Journal for Numerical and Analytical Methods in Geomechanics
publication_identifier:
  issn:
  - 0363-9061
  - 1096-9853
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: A finite element algorithm for parameter identification of material models
  for fluid saturated porous media
type: journal_article
user_id: '335'
volume: 25
year: '2002'
...
---
_id: '45412'
author:
- first_name: Rolf
  full_name: Mahnken, Rolf
  id: '335'
  last_name: Mahnken
- first_name: M.
  full_name: Kohlmeier, M.
  last_name: Kohlmeier
citation:
  ama: Mahnken R, Kohlmeier M. Finite element simulation for rock salt with dilatancy
    boundary coupled to fluid permeation. <i>Computer Methods in Applied Mechanics
    and Engineering</i>. 2002;190(32-33):4259-4278. doi:<a href="https://doi.org/10.1016/s0045-7825(00)00317-0">10.1016/s0045-7825(00)00317-0</a>
  apa: Mahnken, R., &#38; Kohlmeier, M. (2002). Finite element simulation for rock
    salt with dilatancy boundary coupled to fluid permeation. <i>Computer Methods
    in Applied Mechanics and Engineering</i>, <i>190</i>(32–33), 4259–4278. <a href="https://doi.org/10.1016/s0045-7825(00)00317-0">https://doi.org/10.1016/s0045-7825(00)00317-0</a>
  bibtex: '@article{Mahnken_Kohlmeier_2002, title={Finite element simulation for rock
    salt with dilatancy boundary coupled to fluid permeation}, volume={190}, DOI={<a
    href="https://doi.org/10.1016/s0045-7825(00)00317-0">10.1016/s0045-7825(00)00317-0</a>},
    number={32–33}, journal={Computer Methods in Applied Mechanics and Engineering},
    publisher={Elsevier BV}, author={Mahnken, Rolf and Kohlmeier, M.}, year={2002},
    pages={4259–4278} }'
  chicago: 'Mahnken, Rolf, and M. Kohlmeier. “Finite Element Simulation for Rock Salt
    with Dilatancy Boundary Coupled to Fluid Permeation.” <i>Computer Methods in Applied
    Mechanics and Engineering</i> 190, no. 32–33 (2002): 4259–78. <a href="https://doi.org/10.1016/s0045-7825(00)00317-0">https://doi.org/10.1016/s0045-7825(00)00317-0</a>.'
  ieee: 'R. Mahnken and M. Kohlmeier, “Finite element simulation for rock salt with
    dilatancy boundary coupled to fluid permeation,” <i>Computer Methods in Applied
    Mechanics and Engineering</i>, vol. 190, no. 32–33, pp. 4259–4278, 2002, doi:
    <a href="https://doi.org/10.1016/s0045-7825(00)00317-0">10.1016/s0045-7825(00)00317-0</a>.'
  mla: Mahnken, Rolf, and M. Kohlmeier. “Finite Element Simulation for Rock Salt with
    Dilatancy Boundary Coupled to Fluid Permeation.” <i>Computer Methods in Applied
    Mechanics and Engineering</i>, vol. 190, no. 32–33, Elsevier BV, 2002, pp. 4259–78,
    doi:<a href="https://doi.org/10.1016/s0045-7825(00)00317-0">10.1016/s0045-7825(00)00317-0</a>.
  short: R. Mahnken, M. Kohlmeier, Computer Methods in Applied Mechanics and Engineering
    190 (2002) 4259–4278.
date_created: 2023-05-31T11:52:51Z
date_updated: 2023-05-31T11:53:38Z
department:
- _id: '9'
- _id: '154'
doi: 10.1016/s0045-7825(00)00317-0
intvolume: '       190'
issue: 32-33
keyword:
- Computer Science Applications
- General Physics and Astronomy
- Mechanical Engineering
- Mechanics of Materials
- Computational Mechanics
language:
- iso: eng
page: 4259-4278
publication: Computer Methods in Applied Mechanics and Engineering
publication_identifier:
  issn:
  - 0045-7825
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Finite element simulation for rock salt with dilatancy boundary coupled to
  fluid permeation
type: journal_article
user_id: '335'
volume: 190
year: '2002'
...
---
_id: '45424'
author:
- first_name: Rolf
  full_name: Mahnken, Rolf
  id: '335'
  last_name: Mahnken
- first_name: Ellen
  full_name: Kuhl, Ellen
  last_name: Kuhl
citation:
  ama: Mahnken R, Kuhl E. Parameter identification of gradient enhanced damage models
    with the finite element method. <i>European Journal of Mechanics - A/Solids</i>.
    2002;18(5):819-835. doi:<a href="https://doi.org/10.1016/s0997-7538(99)00127-8">10.1016/s0997-7538(99)00127-8</a>
  apa: Mahnken, R., &#38; Kuhl, E. (2002). Parameter identification of gradient enhanced
    damage models with the finite element method. <i>European Journal of Mechanics
    - A/Solids</i>, <i>18</i>(5), 819–835. <a href="https://doi.org/10.1016/s0997-7538(99)00127-8">https://doi.org/10.1016/s0997-7538(99)00127-8</a>
  bibtex: '@article{Mahnken_Kuhl_2002, title={Parameter identification of gradient
    enhanced damage models with the finite element method}, volume={18}, DOI={<a href="https://doi.org/10.1016/s0997-7538(99)00127-8">10.1016/s0997-7538(99)00127-8</a>},
    number={5}, journal={European Journal of Mechanics - A/Solids}, publisher={Elsevier
    BV}, author={Mahnken, Rolf and Kuhl, Ellen}, year={2002}, pages={819–835} }'
  chicago: 'Mahnken, Rolf, and Ellen Kuhl. “Parameter Identification of Gradient Enhanced
    Damage Models with the Finite Element Method.” <i>European Journal of Mechanics
    - A/Solids</i> 18, no. 5 (2002): 819–35. <a href="https://doi.org/10.1016/s0997-7538(99)00127-8">https://doi.org/10.1016/s0997-7538(99)00127-8</a>.'
  ieee: 'R. Mahnken and E. Kuhl, “Parameter identification of gradient enhanced damage
    models with the finite element method,” <i>European Journal of Mechanics - A/Solids</i>,
    vol. 18, no. 5, pp. 819–835, 2002, doi: <a href="https://doi.org/10.1016/s0997-7538(99)00127-8">10.1016/s0997-7538(99)00127-8</a>.'
  mla: Mahnken, Rolf, and Ellen Kuhl. “Parameter Identification of Gradient Enhanced
    Damage Models with the Finite Element Method.” <i>European Journal of Mechanics
    - A/Solids</i>, vol. 18, no. 5, Elsevier BV, 2002, pp. 819–35, doi:<a href="https://doi.org/10.1016/s0997-7538(99)00127-8">10.1016/s0997-7538(99)00127-8</a>.
  short: R. Mahnken, E. Kuhl, European Journal of Mechanics - A/Solids 18 (2002) 819–835.
date_created: 2023-05-31T12:15:51Z
date_updated: 2023-05-31T12:17:11Z
department:
- _id: '9'
- _id: '154'
doi: 10.1016/s0997-7538(99)00127-8
intvolume: '        18'
issue: '5'
keyword:
- General Physics and Astronomy
- Mechanical Engineering
- Mechanics of Materials
- General Materials Science
language:
- iso: eng
page: 819-835
publication: European Journal of Mechanics - A/Solids
publication_identifier:
  issn:
  - 0997-7538
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Parameter identification of gradient enhanced damage models with the finite
  element method
type: journal_article
user_id: '335'
volume: 18
year: '2002'
...
---
_id: '45429'
author:
- first_name: Rolf
  full_name: Mahnken, Rolf
  id: '335'
  last_name: Mahnken
- first_name: Erwin
  full_name: Stein, Erwin
  last_name: Stein
citation:
  ama: Mahnken R, Stein E. A unified approach for parameter identification of inelastic
    material models in the frame of the finite element method. <i>Computer Methods
    in Applied Mechanics and Engineering</i>. 2002;136(3-4):225-258. doi:<a href="https://doi.org/10.1016/0045-7825(96)00991-7">10.1016/0045-7825(96)00991-7</a>
  apa: Mahnken, R., &#38; Stein, E. (2002). A unified approach for parameter identification
    of inelastic material models in the frame of the finite element method. <i>Computer
    Methods in Applied Mechanics and Engineering</i>, <i>136</i>(3–4), 225–258. <a
    href="https://doi.org/10.1016/0045-7825(96)00991-7">https://doi.org/10.1016/0045-7825(96)00991-7</a>
  bibtex: '@article{Mahnken_Stein_2002, title={A unified approach for parameter identification
    of inelastic material models in the frame of the finite element method}, volume={136},
    DOI={<a href="https://doi.org/10.1016/0045-7825(96)00991-7">10.1016/0045-7825(96)00991-7</a>},
    number={3–4}, journal={Computer Methods in Applied Mechanics and Engineering},
    publisher={Elsevier BV}, author={Mahnken, Rolf and Stein, Erwin}, year={2002},
    pages={225–258} }'
  chicago: 'Mahnken, Rolf, and Erwin Stein. “A Unified Approach for Parameter Identification
    of Inelastic Material Models in the Frame of the Finite Element Method.” <i>Computer
    Methods in Applied Mechanics and Engineering</i> 136, no. 3–4 (2002): 225–58.
    <a href="https://doi.org/10.1016/0045-7825(96)00991-7">https://doi.org/10.1016/0045-7825(96)00991-7</a>.'
  ieee: 'R. Mahnken and E. Stein, “A unified approach for parameter identification
    of inelastic material models in the frame of the finite element method,” <i>Computer
    Methods in Applied Mechanics and Engineering</i>, vol. 136, no. 3–4, pp. 225–258,
    2002, doi: <a href="https://doi.org/10.1016/0045-7825(96)00991-7">10.1016/0045-7825(96)00991-7</a>.'
  mla: Mahnken, Rolf, and Erwin Stein. “A Unified Approach for Parameter Identification
    of Inelastic Material Models in the Frame of the Finite Element Method.” <i>Computer
    Methods in Applied Mechanics and Engineering</i>, vol. 136, no. 3–4, Elsevier
    BV, 2002, pp. 225–58, doi:<a href="https://doi.org/10.1016/0045-7825(96)00991-7">10.1016/0045-7825(96)00991-7</a>.
  short: R. Mahnken, E. Stein, Computer Methods in Applied Mechanics and Engineering
    136 (2002) 225–258.
date_created: 2023-05-31T12:22:58Z
date_updated: 2023-05-31T12:23:36Z
department:
- _id: '9'
- _id: '154'
doi: 10.1016/0045-7825(96)00991-7
intvolume: '       136'
issue: 3-4
keyword:
- Computer Science Applications
- General Physics and Astronomy
- Mechanical Engineering
- Mechanics of Materials
- Computational Mechanics
language:
- iso: eng
page: 225-258
publication: Computer Methods in Applied Mechanics and Engineering
publication_identifier:
  issn:
  - 0045-7825
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: A unified approach for parameter identification of inelastic material models
  in the frame of the finite element method
type: journal_article
user_id: '335'
volume: 136
year: '2002'
...
---
_id: '45432'
author:
- first_name: Rolf
  full_name: Mahnken, Rolf
  id: '335'
  last_name: Mahnken
- first_name: E
  full_name: Stein, E
  last_name: Stein
citation:
  ama: Mahnken R, Stein E. The identification of parameters for visco-plastic models
    via finite-element methods and gradient methods. <i>Modelling and Simulation in
    Materials Science and Engineering</i>. 2002;2(3A):597-616. doi:<a href="https://doi.org/10.1088/0965-0393/2/3a/013">10.1088/0965-0393/2/3a/013</a>
  apa: Mahnken, R., &#38; Stein, E. (2002). The identification of parameters for visco-plastic
    models via finite-element methods and gradient methods. <i>Modelling and Simulation
    in Materials Science and Engineering</i>, <i>2</i>(3A), 597–616. <a href="https://doi.org/10.1088/0965-0393/2/3a/013">https://doi.org/10.1088/0965-0393/2/3a/013</a>
  bibtex: '@article{Mahnken_Stein_2002, title={The identification of parameters for
    visco-plastic models via finite-element methods and gradient methods}, volume={2},
    DOI={<a href="https://doi.org/10.1088/0965-0393/2/3a/013">10.1088/0965-0393/2/3a/013</a>},
    number={3A}, journal={Modelling and Simulation in Materials Science and Engineering},
    publisher={IOP Publishing}, author={Mahnken, Rolf and Stein, E}, year={2002},
    pages={597–616} }'
  chicago: 'Mahnken, Rolf, and E Stein. “The Identification of Parameters for Visco-Plastic
    Models via Finite-Element Methods and Gradient Methods.” <i>Modelling and Simulation
    in Materials Science and Engineering</i> 2, no. 3A (2002): 597–616. <a href="https://doi.org/10.1088/0965-0393/2/3a/013">https://doi.org/10.1088/0965-0393/2/3a/013</a>.'
  ieee: 'R. Mahnken and E. Stein, “The identification of parameters for visco-plastic
    models via finite-element methods and gradient methods,” <i>Modelling and Simulation
    in Materials Science and Engineering</i>, vol. 2, no. 3A, pp. 597–616, 2002, doi:
    <a href="https://doi.org/10.1088/0965-0393/2/3a/013">10.1088/0965-0393/2/3a/013</a>.'
  mla: Mahnken, Rolf, and E. Stein. “The Identification of Parameters for Visco-Plastic
    Models via Finite-Element Methods and Gradient Methods.” <i>Modelling and Simulation
    in Materials Science and Engineering</i>, vol. 2, no. 3A, IOP Publishing, 2002,
    pp. 597–616, doi:<a href="https://doi.org/10.1088/0965-0393/2/3a/013">10.1088/0965-0393/2/3a/013</a>.
  short: R. Mahnken, E. Stein, Modelling and Simulation in Materials Science and Engineering
    2 (2002) 597–616.
date_created: 2023-05-31T12:28:01Z
date_updated: 2023-05-31T12:28:27Z
department:
- _id: '9'
- _id: '154'
doi: 10.1088/0965-0393/2/3a/013
intvolume: '         2'
issue: 3A
keyword:
- Computer Science Applications
- Mechanics of Materials
- Condensed Matter Physics
- General Materials Science
- Modeling and Simulation
language:
- iso: eng
page: 597-616
publication: Modelling and Simulation in Materials Science and Engineering
publication_identifier:
  issn:
  - 0965-0393
  - 1361-651X
publication_status: published
publisher: IOP Publishing
quality_controlled: '1'
status: public
title: The identification of parameters for visco-plastic models via finite-element
  methods and gradient methods
type: journal_article
user_id: '335'
volume: 2
year: '2002'
...
---
_id: '45430'
author:
- first_name: Rolf
  full_name: Mahnken, Rolf
  id: '335'
  last_name: Mahnken
- first_name: Erwin
  full_name: Stein, Erwin
  last_name: Stein
citation:
  ama: Mahnken R, Stein E. Parameter identification for viscoplastic models based
    on analytical derivatives of a least-squares functional and stability investigations.
    <i>International Journal of Plasticity</i>. 2002;12(4):451-479. doi:<a href="https://doi.org/10.1016/s0749-6419(95)00016-x">10.1016/s0749-6419(95)00016-x</a>
  apa: Mahnken, R., &#38; Stein, E. (2002). Parameter identification for viscoplastic
    models based on analytical derivatives of a least-squares functional and stability
    investigations. <i>International Journal of Plasticity</i>, <i>12</i>(4), 451–479.
    <a href="https://doi.org/10.1016/s0749-6419(95)00016-x">https://doi.org/10.1016/s0749-6419(95)00016-x</a>
  bibtex: '@article{Mahnken_Stein_2002, title={Parameter identification for viscoplastic
    models based on analytical derivatives of a least-squares functional and stability
    investigations}, volume={12}, DOI={<a href="https://doi.org/10.1016/s0749-6419(95)00016-x">10.1016/s0749-6419(95)00016-x</a>},
    number={4}, journal={International Journal of Plasticity}, publisher={Elsevier
    BV}, author={Mahnken, Rolf and Stein, Erwin}, year={2002}, pages={451–479} }'
  chicago: 'Mahnken, Rolf, and Erwin Stein. “Parameter Identification for Viscoplastic
    Models Based on Analytical Derivatives of a Least-Squares Functional and Stability
    Investigations.” <i>International Journal of Plasticity</i> 12, no. 4 (2002):
    451–79. <a href="https://doi.org/10.1016/s0749-6419(95)00016-x">https://doi.org/10.1016/s0749-6419(95)00016-x</a>.'
  ieee: 'R. Mahnken and E. Stein, “Parameter identification for viscoplastic models
    based on analytical derivatives of a least-squares functional and stability investigations,”
    <i>International Journal of Plasticity</i>, vol. 12, no. 4, pp. 451–479, 2002,
    doi: <a href="https://doi.org/10.1016/s0749-6419(95)00016-x">10.1016/s0749-6419(95)00016-x</a>.'
  mla: Mahnken, Rolf, and Erwin Stein. “Parameter Identification for Viscoplastic
    Models Based on Analytical Derivatives of a Least-Squares Functional and Stability
    Investigations.” <i>International Journal of Plasticity</i>, vol. 12, no. 4, Elsevier
    BV, 2002, pp. 451–79, doi:<a href="https://doi.org/10.1016/s0749-6419(95)00016-x">10.1016/s0749-6419(95)00016-x</a>.
  short: R. Mahnken, E. Stein, International Journal of Plasticity 12 (2002) 451–479.
date_created: 2023-05-31T12:24:47Z
date_updated: 2023-05-31T12:25:19Z
department:
- _id: '9'
- _id: '154'
doi: 10.1016/s0749-6419(95)00016-x
intvolume: '        12'
issue: '4'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- General Materials Science
language:
- iso: eng
page: 451-479
publication: International Journal of Plasticity
publication_identifier:
  issn:
  - 0749-6419
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Parameter identification for viscoplastic models based on analytical derivatives
  of a least-squares functional and stability investigations
type: journal_article
user_id: '335'
volume: 12
year: '2002'
...