@article{51518,
  abstract     = {{In applications of piezoelectric actuators and sensors, the dependability and particularly the reliability throughout their lifetime are vital to manufacturers and end-users and are enabled through condition-monitoring approaches. Existing approaches often utilize impedance measurements over a range of frequencies or velocity measurements and require additional equipment or sensors, such as a laser Doppler vibrometer. Furthermore, the non-negligible effects of varying operating conditions are often unconsidered. To minimize the need for additional sensors while maintaining the dependability of piezoelectric bending actuators irrespective of varying operating conditions, an online diagnostics approach is proposed. To this end, time- and frequency-domain features are extracted from monitored current signals to reflect hairline crack development in bending actuators. For validation of applicability, the presented analysis method was evaluated on piezoelectric bending actuators subjected to accelerated lifetime tests at varying voltage amplitudes and under external damping conditions. In the presence of a crack and due to a diminished stiffness, the resonance frequency decreases and the root-mean-square amplitude of the current signal simultaneously abruptly drops during the lifetime tests. Furthermore, the piezoelectric crack surfaces clapping is reflected in higher harmonics of the current signal. Thus, time-domain features and harmonics of the current signals are sufficient to diagnose hairline cracks in the actuators.}},
  author       = {{Aimiyekagbon, Osarenren Kennedy and Bender, Amelie and Hemsel, Tobias and Sextro, Walter}},
  issn         = {{2079-9292}},
  journal      = {{Electronics}},
  keywords     = {{piezoelectric transducer, self-sensing, fault detection, diagnostics, hairline crack, condition monitoring}},
  number       = {{3}},
  publisher    = {{MDPI AG}},
  title        = {{{Diagnostics of Piezoelectric Bending Actuators Subjected to Varying Operating Conditions}}},
  doi          = {{10.3390/electronics13030521}},
  volume       = {{13}},
  year         = {{2024}},
}

@article{53611,
  author       = {{Hoffmann, Christin and Thommes, Kirsten}},
  issn         = {{0095-0696}},
  journal      = {{Journal of Environmental Economics and Management}},
  keywords     = {{Management, Monitoring, Policy and Law, Economics and Econometrics}},
  publisher    = {{Elsevier BV}},
  title        = {{{Can leaders motivate employees’ energy-efficient behavior with thoughtful communication?}}},
  doi          = {{10.1016/j.jeem.2024.102990}},
  year         = {{2024}},
}

@inproceedings{57204,
  abstract     = {{In this study on the use of gesture deixis during explanations, a sample of 24 videorecorded dyadic interactions of a board game explanation was analyzed. The relation between the use of gesture deixis by different explainers and their interpretation of explainees' understanding was investigated. In addition, we describe explainers' intra-individual variations related to their interactions with three different explainees consecutively. While we did not find a relation between interpretations of explainees' complete understanding and a decrease in explainers' use of gesture deixis, we demonstrated that the overall use of gesture deixis is related to the process of interactional monitoring and the attendance of a different explainee.}},
  author       = {{Lazarov, Stefan Teodorov and Grimminger, Angela}},
  booktitle    = {{Proceedings of the Annual Meeting of the Cognitive Science Society}},
  keywords     = {{explanation, gesture deixis, monitoring, understanding}},
  location     = {{Rotterdam}},
  title        = {{{Variations in explainers’ gesture deixis in explanations related to the monitoring of explainees’ understanding}}},
  volume       = {{46}},
  year         = {{2024}},
}

@article{48500,
  author       = {{Namujju, Lillian Donna and Acquah-Swanzy, Henrietta and Ngoti, Irene F.}},
  issn         = {{0301-4215}},
  journal      = {{Energy Policy}},
  keywords     = {{Management, Monitoring, Policy and Law, General Energy}},
  publisher    = {{Elsevier BV}},
  title        = {{{An IAD framework analysis of minigrid institutions for sustainable rural electrification in East Africa: A comparative study of Uganda and Tanzania}}},
  doi          = {{10.1016/j.enpol.2023.113742}},
  volume       = {{182}},
  year         = {{2023}},
}

@article{53221,
  author       = {{Soltanifar, Mehdi and Tavana, Madjid and Santos-Arteaga, Francisco J. and Sharafi, Hamid}},
  issn         = {{1462-9011}},
  journal      = {{Environmental Science & Policy}},
  keywords     = {{Management, Monitoring, Policy and Law, Geography, Planning and Development}},
  pages        = {{89--102}},
  publisher    = {{Elsevier BV}},
  title        = {{{A hybrid multi-attribute decision-making and data envelopment analysis model with heterogeneous attributes: The case of sustainable development goals}}},
  doi          = {{10.1016/j.envsci.2023.06.004}},
  volume       = {{147}},
  year         = {{2023}},
}

@article{42638,
  abstract     = {{<jats:p> We propose a new method to estimate and isolate the localization of knowledge spillovers due to the physical presence of a person, using after-application but pre-grant deaths of differently located coinventors of the same patent. The approach estimates the differences in local citations between the deceased and still-living inventors at increasingly distant radii. Patents receive 26 percent fewer citations from within a radius of 20 miles around the deceased, relative to still-living coinventors. Differences attenuate with time and distance, are stronger when still-living coinventors live farther from the deceased, and hold for a subsample of possibly premature deaths. (JEL O31, O33, O34, R32) </jats:p>}},
  author       = {{Balsmeier, Benjamin and Fleming, Lee and Lück, Sonja}},
  issn         = {{2640-205X}},
  journal      = {{American Economic Review: Insights}},
  keywords     = {{Management, Monitoring, Policy and Law, Geography, Planning and Development}},
  number       = {{1}},
  pages        = {{21--33}},
  publisher    = {{American Economic Association}},
  title        = {{{Isolating Personal Knowledge Spillovers: Coinventor Deaths and Spatial Citation Differentials}}},
  doi          = {{10.1257/aeri.20210275}},
  volume       = {{5}},
  year         = {{2023}},
}

@article{44672,
  abstract     = {{With enhancing digitalization, condition monitoring is used in an increasing number of application fields across various industrial sectors. By its application, increased reliability as well as reduced risks and costs can be achieved. Based on different approaches, technical systems are monitored and measured data is analyzed to enable condition-based or predictive maintenance. To this end, machine learning approaches are usually implemented to diagnose the health states or predict the health index of the monitored system. However, these trained models are often black-box models, not intuitively explainable for a human. To overcome this shortcoming, a model-based approach based on physics is developed for piezoelectric bending actuators. Such a model enables a transparent representation of the system. Moreover, the model-based approach is extended by a parameter-estimation to account for sudden changes in behavior e. g. caused by occurring cracks.}},
  author       = {{Bender, Amelie}},
  issn         = {{0924-4247}},
  journal      = {{Sensors and Actuators A: Physical}},
  keywords     = {{Condition Monitoring, Model-based approach Diagnostics, Varying conditions, Explainability, Piezoelectric bending actuators}},
  publisher    = {{Elsevier BV}},
  title        = {{{Model-based condition monitoring of piezoelectric bending actuators}}},
  doi          = {{10.1016/j.sna.2023.114399}},
  volume       = {{357}},
  year         = {{2023}},
}

@article{45865,
  author       = {{Wolf, Isabel and Holzapfel, Peter K.R. and Meschede, Henning and Finkbeiner, Matthias}},
  issn         = {{0306-2619}},
  journal      = {{Applied Energy}},
  keywords     = {{Management, Monitoring, Policy and Law, Mechanical Engineering, General Energy, Building and Construction}},
  publisher    = {{Elsevier BV}},
  title        = {{{On the potential of temporally resolved GHG emission factors for load shifting: A case study on electrified steam generation}}},
  doi          = {{10.1016/j.apenergy.2023.121433}},
  volume       = {{348}},
  year         = {{2023}},
}

@article{47920,
  abstract     = {{<jats:title>Abstract</jats:title><jats:p>Integrated thinking (IT) is a managerial mindset increasingly discussed in the context of value creation. Through the lens of systems theory, this study examines how the degree to which IT is embedded in a firm's strategy and day‐to‐day business processes is associated with the firm's social and environmental value creation. Using a broad international dataset, we find strong evidence that our measure of IT is positively related to a firm's sustainability performance (SP), which we use to operationalize social and environmental value creation (or erosion). Our results also reveal that the increase in a firm's SP might come at the cost of a short‐term decrease in financial performance (FP). We find no indication, however, that IT induces a trade‐off between SP and long‐term FP. Integrated thinking appears to stipulate long‐term financial value creation instead. We further explore moderating factors within the organizational and institutional context of our sample firms and highlight implications for society, corporate practice, and policymaking.</jats:p>}},
  author       = {{Reimsbach, Daniel and Braam, Geert}},
  issn         = {{0964-4733}},
  journal      = {{Business Strategy and the Environment}},
  keywords     = {{Management, Monitoring, Policy and Law, Strategy and Management, Geography, Planning and Development, Business and International Management}},
  number       = {{1}},
  pages        = {{304--320}},
  publisher    = {{Wiley}},
  title        = {{{Creating social and environmental value through integrated thinking: International evidence}}},
  doi          = {{10.1002/bse.3131}},
  volume       = {{32}},
  year         = {{2022}},
}

@article{37153,
  abstract     = {{<jats:p>Green IS (GIS) research addresses environmental challenges brought on by climate change and the need to preserve the natural environment. Within this scope, design-oriented research, most notably within the Design Science Research (DSR) community, aims to provide solutions to these environmental challenges in the form of novel artifacts. The resulting IS solutions are valuable instruments for reducing emissions, increasing energy efficiency, and mitigating waste. Over the past 14 years, the IS research community was called upon multiple times to focus on designing solutions suitable for facilitating sustainability. However, it is unclear how these calls for action resonated within the design-oriented research community. Against this background, we analyzed the landscape of design-oriented GIS research by looking at 60 different GIS studies that have designed and evaluated an artifact. By analyzing these publications, we were able to make six observations. Based on these observations, we discuss how design-oriented GIS research can evolve to live up to the expectations of creating an immediate positive environmental impact.</jats:p>}},
  author       = {{Brendel, Alfred Benedikt and Chasin, Friedrich and Mirbabaie, Milad and Riehle, Dennis M. and Harnischmacher, Christine}},
  issn         = {{2071-1050}},
  journal      = {{Sustainability}},
  keywords     = {{Management, Monitoring, Policy and Law, Renewable Energy, Sustainability and the Environment, Geography, Planning and Development}},
  number       = {{8}},
  publisher    = {{MDPI AG}},
  title        = {{{Review of Design-Oriented Green Information Systems Research}}},
  doi          = {{10.3390/su14084650}},
  volume       = {{14}},
  year         = {{2022}},
}

@inproceedings{33356,
  abstract     = {{By monitoring the recoating process within polymer laser sintering production, it was shown that multiple powder-spread-flaws can be detected. Those groove-like flaws are expected to be the result of agglomerates jamming between the recoater and the last powder layer. This work is analyzing the interaction between powder-spread-flaws and part properties, showing the influence of the recoating process on the performance of laser sintering parts. Therefore, artificial powder-spread-flaws are applied to the build jobs of tensile test specimens which are measured and analyzed regarding the elongation at break, strength and fracture position. For the characteristics of the flaws, the artificial grooves are varied in depth and width. Furthermore, the position of the flaw is changed form mid part to close to surface areas. It was shown, that several flaws are visible at the part surface, resulting in stress concentration and reduced performance. But there are as well parts with flaw-layers, which are not visible after the build process on the part. Those parts can have significantly reduced mechanical properties as well.}},
  author       = {{Klippstein, Sven Helge and Schmid, Hans-Joachim}},
  booktitle    = {{Proceedings of the 33nd Annual International Solid Freeform Fabrication Symposium}},
  keywords     = {{Selective Sasersintering, Process Monitoring, Powder Spread}},
  title        = {{{Powder Spread Flaws in Polymer Laser Sintering and its Influences on Mechanical Performance}}},
  year         = {{2022}},
}

@inproceedings{33997,
  abstract     = {{Digital platforms have already led to disruptions in multiple B2C markets and are becoming increasingly dominant in B2B markets. As a result, more and more companies are trying to participate in the platform economy. However, the successful development and operation of a digital platform is associated with significant challenges, which leads to 85% of all platforms failing. A core challenge is the dynamic nature of the platform economy, with varying strategic objectives at different stages in the platform lifecycle. Platform operators must continuously monitor platform progress and adjust their strategy.
Utilizing action research in the real-world platform project AI Marketplace, we developed a lifecycle-oriented performance management approach for digital platforms in B2B markets. It enables platform operators to reflect on their position in the platform lifecycle, derive relevant strategic objectives, and monitor them with suitable key performance indicators. Hence, allowing them to secure the long-term success of their platform business.}},
  author       = {{Özcan, Leon and Kirchberg, Lisa Irene and Koldewey, Christian and Dumitrescu, Roman}},
  booktitle    = {{The Role of Innovation: Past, Present, Future}},
  editor       = {{Bitran, Iain and Bitetti, Leandro and  Conn, Steffen and Fishburn, Jessica and Huizingh, Eelko  and Torkkeli, Marko and Yang, Jialei}},
  keywords     = {{Digital Platform, Two-Sided Market, Multi-Sided Market, Platform Lifecycle, Platform Monitoring, Performance Management}},
  location     = {{Athens}},
  title        = {{{Performance Management Approach for Digital Platforms in B2B Markets}}},
  year         = {{2022}},
}

@article{44896,
  abstract     = {{<jats:p>This study uniquely employs a fuzzy-set qualitative comparative analysis (fsQCA) technique to account for complex relationships in consumption. The fsQCA technique assumes that relationships are based on a set–subset relationship. This assumption is fundamental when decision-makers are affected by information asymmetry and are, thus, required to jointly evaluate the credibility and reliability of a range of external signals. This issue also affects consumers in markets for cultural goods, where the quality of products is not known with certainty in advance of the purchase decision. Our study uses fsQCA to establish the effect of different quality signals on consumption in the US market for video game software. Our results show that reviews from professional critics alongside brand extension and multi-platform release strategies act as signals of product quality and, therefore, lead to high sales performance.</jats:p>}},
  author       = {{Kaimann, Daniel and Cox, Joe}},
  issn         = {{2071-1050}},
  journal      = {{Sustainability}},
  keywords     = {{Management, Monitoring, Policy and Law, Renewable Energy, Sustainability and the Environment, Geography, Planning and Development}},
  number       = {{23}},
  publisher    = {{MDPI AG}},
  title        = {{{A Comparative Analysis of Consumption: Evidence from a Cultural Goods Market}}},
  doi          = {{10.3390/su132313275}},
  volume       = {{13}},
  year         = {{2021}},
}

@article{45586,
  abstract     = {{<jats:title>Abstract</jats:title><jats:p>We have collected data from a world-wide survey among COP delegates to empirically investigate preferences for certain burden sharing rules among key groups in a setting that reflects the possibility of observing concessions from negotiating partners. In our survey, the participants had the opportunity to select and combine up to eight (pre-defined) burden sharing rules and to assign relative weights to the selected rules in their preferred bundle. We examine whether such a mechanism helps to overcome the currently strictly (self-interested) strategic claims on equity in the negotiation process. We observe that delegates from different groups of countries show a general willingness for concessions. However, the degree to which different burden sharing rules are taken into consideration partly differs between countries. As a key insight we report that the individual assessment of the polluter-pays rule based on current emissions does not only stress the persistence of the traditional Annex-B/Non-Annex-B division but also suggests tendencies for a more fragmented grouping with different positions between, for example, delegates from developing countries (i.e. G77 members) and emerging countries (i.e. BASIC). At the same time, we observe tendencies for a more harmonized view among key groups towards the ability-to-pay rule in a setting of weighted burden sharing rules.</jats:p>}},
  author       = {{Kesternich, Martin and Löschel, Andreas and Ziegler, Andreas}},
  issn         = {{1432-847X}},
  journal      = {{Environmental Economics and Policy Studies}},
  keywords     = {{Management, Monitoring, Policy and Law, Economics and Econometrics}},
  number       = {{2}},
  pages        = {{309--331}},
  publisher    = {{Springer Science and Business Media LLC}},
  title        = {{{Negotiating weights for burden sharing rules in international climate negotiations: an empirical analysis}}},
  doi          = {{10.1007/s10018-020-00289-0}},
  volume       = {{23}},
  year         = {{2020}},
}

@inproceedings{15368,
  abstract     = {{Service Level Agreements are essential tools enabling clients and telco operators to specify required quality of service. The 5GTANGO NFV platform enables SLAs through policies and custom service lifecycle management components. This allows the operator to trigger certain lifecycle management events for a service, and the network service developer to define how to execute such events (e.g., how to scale). In this demo we will demonstrate this unique 5GTANGO concept using an elastic proxy service supported by a high availability SLA enforced through a range of traffic regimes.}},
  author       = {{Soenen, Thomas and Vicens, Felipe and Bonnet, José and Parada, Carlos and Kapassa, Evgenia and Touloupou, Marious and Fotopulou, Eleni and Zafeiropoulos, Anastasios and Pol, Ana and Kolometsos, Stavros and Xilouris, George and Alemany, Pol and Vilalta, Ricard and Trakadas, Panos and Karkazis, Panos and Peuster, Manuel and Tavernier, Wouter}},
  booktitle    = {{2019 IFIP/IEEE Symposium on Integrated Network and Service Management (IM)}},
  issn         = {{1573-0077}},
  keywords     = {{5G mobile communication, contracts, quality of service, telecommunication traffic, virtualisation, custom service lifecycle management components, lifecycle management events, network service developer, elastic proxy service, SLA-controlled proxy service, customisable MANO, operator policies, Service Level Agreements, unique 5G TANGO concept, 5G TANGO NFV platform, quality of service, traffic regimes, high availability SLA, Monitoring, Probes, Portals, Quality of service, Tools, Servers, Graphical user interfaces}},
  location     = {{Arlington, VA, USA, USA}},
  pages        = {{707--708}},
  title        = {{{SLA-controlled Proxy Service Through Customisable MANO Supporting Operator Policies}}},
  year         = {{2019}},
}

@inproceedings{13460,
  abstract     = {{Remaining useful lifetime (RUL) predictions as part of a condition monitoring system are focused in more and more research and industrial applications. To establish an efficient and precise estimate of the RUL of a technical product, different  uncertainties  have  to  be  handled.  To  minimize  the  uncertainties  of  the  RUL  estimation,  a  reliable and accurate prognostic approach as well as a good failure threshold are important. Regarding the failure threshold, most often  an  expert  sets  a  fixed  failure  threshold.  However,  neither  the  a  priori  known  failure  threshold  nor  a  fixedthreshold value are feasible in every application. Especially in the case of varying characteristics of the monitored system, an adaptive failure threshold is of great importance concerning the accuracy of the RUL estimation.  Rubber-metal-elements, which are used in a wide range of applications for vibration and sound isolation, are mon-itored by thermocouples to allow for lifetime predictions. Therefore, the element’s state is described by its temper-ature during its service life. Aiming to establish accurate RUL predictions of a rubber-metal-element, uncertainties due to nonlinear material characteristics and changing operational conditions have to be considered. Consequently, different temperature-based failure threshold definitions are implemented and compared within a particle filtering approach. }},
  author       = {{Bender, Amelie and Schinke, Lennart and Sextro, Walter}},
  booktitle    = {{Proceedings of the 29th European Safety and Reliability Conference (ESREL2019)}},
  editor       = {{Beer, Michael and Zio, Enrico}},
  isbn         = {{978-981-11-2724-3}},
  keywords     = {{RUL prediction, adaptive threshold, prognostics, condition monitoring}},
  location     = {{Hannover}},
  number       = {{29}},
  pages        = {{1262--1269}},
  title        = {{{Remaining useful lifetime prediction based on adaptive failure thresholds}}},
  year         = {{2019}},
}

@book{21817,
  author       = {{Goller, Michael}},
  isbn         = {{978-3-946023-04-3}},
  keywords     = {{Bahnhofsmission, Survey Feedback, Monitoring}},
  pages        = {{200}},
  publisher    = {{IN VIA Verlag}},
  title        = {{{Monitoring für die Bahnhofsmissionen: Ein datengestütztes Instrument zur Organisationsentwicklung. Projektbeschreibung und Ergebnisdarstellung}}},
  year         = {{2018}},
}

@article{47915,
  abstract     = {{<jats:title>Abstract</jats:title><jats:p>This study posits that, in the absence of extensive mandatory regulation and auditing, differences in internal and external corporate governance (CG) mechanisms will explain variations in choices concerning corporate sustainability reporting and the interrelated and underlying corporate sustainability performance (CSP). Specifically, we explore whether board monitoring effectiveness as a major internal CG mechanism and stakeholder engagement as a key external CG mechanism are positively associated with sustainability reporting quality (SRQ), compliance with generally accepted sustainability reporting standards (SRC) and guidelines, and CSP for a sample of Dutch firms that have voluntarily disclosed sustainability reports during the years 2012–2016. In addition to these direct effects, we also investigate the potential indirect effects of the CG mechanisms on SRQ and SRC via CSP and distinguish between nonlagged and lag effects. Using structural equation modeling, our results show that, in the short term, monitoring effectiveness positively affects SRQ and SRC. Stakeholder engagement positively affects SRQ and SRC in the short term and is positively related to SRQ via CSP in the longer term, indicating that active stakeholders, over time, may drive companies toward more sustainable business conduct. Finally, the findings that CSP is positively related to SRQ but negatively related to SRC provide further support for signaling and legitimacy theory, respectively. Companies with superior CSP disclose high‐quality information on CSP to signal the firm's superior sustainability performance, whereas poor performing companies legitimize their inferior CSP by complying with more reporting standards, rather than by directly improving their underlying CSP.</jats:p>}},
  author       = {{Manning, Bart and Braam, Geert and Reimsbach, Daniel}},
  issn         = {{1535-3958}},
  journal      = {{Corporate Social Responsibility and Environmental Management}},
  keywords     = {{Management, Monitoring, Policy and Law, Strategy and Management, Development}},
  number       = {{2}},
  pages        = {{351--366}},
  publisher    = {{Wiley}},
  title        = {{{Corporate governance and sustainable business conduct—<scp>E</scp>ffects of board monitoring effectiveness and stakeholder engagement on corporate sustainability performance and disclosure choices}}},
  doi          = {{10.1002/csr.1687}},
  volume       = {{26}},
  year         = {{2018}},
}

@article{47916,
  abstract     = {{<jats:title>Abstract</jats:title><jats:p>This study posits that, in the absence of extensive mandatory regulation and auditing, differences in internal and external corporate governance (CG) mechanisms will explain variations in choices concerning corporate sustainability reporting and the interrelated and underlying corporate sustainability performance (CSP). Specifically, we explore whether board monitoring effectiveness as a major internal CG mechanism and stakeholder engagement as a key external CG mechanism are positively associated with sustainability reporting quality (SRQ), compliance with generally accepted sustainability reporting standards (SRC) and guidelines, and CSP for a sample of Dutch firms that have voluntarily disclosed sustainability reports during the years 2012–2016. In addition to these direct effects, we also investigate the potential indirect effects of the CG mechanisms on SRQ and SRC via CSP and distinguish between nonlagged and lag effects. Using structural equation modeling, our results show that, in the short term, monitoring effectiveness positively affects SRQ and SRC. Stakeholder engagement positively affects SRQ and SRC in the short term and is positively related to SRQ via CSP in the longer term, indicating that active stakeholders, over time, may drive companies toward more sustainable business conduct. Finally, the findings that CSP is positively related to SRQ but negatively related to SRC provide further support for signaling and legitimacy theory, respectively. Companies with superior CSP disclose high‐quality information on CSP to signal the firm's superior sustainability performance, whereas poor performing companies legitimize their inferior CSP by complying with more reporting standards, rather than by directly improving their underlying CSP.</jats:p>}},
  author       = {{Manning, Bart and Braam, Geert and Reimsbach, Daniel}},
  issn         = {{1535-3958}},
  journal      = {{Corporate Social Responsibility and Environmental Management}},
  keywords     = {{Management, Monitoring, Policy and Law, Strategy and Management, Development}},
  number       = {{2}},
  pages        = {{351--366}},
  publisher    = {{Wiley}},
  title        = {{{Corporate governance and sustainable business conduct—<scp>E</scp>ffects of board monitoring effectiveness and stakeholder engagement on corporate sustainability performance and disclosure choices}}},
  doi          = {{10.1002/csr.1687}},
  volume       = {{26}},
  year         = {{2018}},
}

@inproceedings{9969,
  abstract     = {{Zuverlässigkeit, Sicherheit und Verfügbarkeit gewinnen bei der Anwendung von technischen Systemen eine immer größere Bedeutung. Aus diesem Grund hat sich Condition Monitoring, die Zustandsüberwachung eines technischen Produkts, in verschiedenen Industriebranchen etabliert. Die sensorbasierte Überwachung eines Produkts während seiner Betriebsdauer in Kombination mit Condition Monitoring Methoden ermöglichen die Bestimmung des aktuellen Zustands des Produkts und somit eine Diagnose, ob das Produkt seine ihm zugeschriebene Funktion zum aktuellen Zeitpunkt erfüllt. Neben Diagnosen bietet Condition Monitoring auch die Möglichkeit Prognosen aufzustellen, dabei wird die restliche Nutzungsdauer des Produkts aufbauend auf geeigneten Sensordaten geschätzt. So kann eine intelligente Wartungsplanung umgesetzt werden, die im Gegensatz zu klassischen Ansätzen keine festen Wartungsintervalle benötigt und die Nachteile einer rein reaktiven Wartung kompensiert. Stattdessen ist es möglich ein Element bis vor das Ende seiner Lebensdauer zu nutzen und erst dann zu warten, um eine optimale Nutzung zu gewährleisten. Durch eine Bestimmung der verbleibenden Restlebensdauer während des Betriebs ist eine optimale Wartungsplanung möglich, wodurch die Verfügbarkeit und die Auslastung der überwachten Produkte signifikant gesteigert werden kann. In dieser Arbeit soll ein produktspezifisches Condition Monitoring System für Gummi-Metall-Elemente entwickelt werden. Diese Elemente werden zur Federung, Geräusch- und/oder Schwingungsisolation in vielen verschiedenen Anwendungen eingesetzt, wie bspw. in Nutz- und Schienenfahrzeugen oder Windenergieanlagen. In Industrie und Forschung werden bereits Zustandsüberwachungen von Systemen mit integrierten Gummi-Metall-Elementen eingesetzt, allerdings noch keine Condition Monitoring Systeme zur alleinigen Zustandsüberwachung dieser Elemente. Aktuell ist es üblich die Lebensdauer dieser Elemente aufbauend auf beschleunigten Lebensdauerversuchen und Erfahrungswerten abzuschätzen. Mit dem Ziel die Lebensdauer des fokussierten Produkts präziser vorherzusagen und damit eine intelligente Wartungsplanung zu ermöglichen, wird die Entwicklung eines Condition Monitoring Systems für Gummi-Metall-Elemente angestrebt und in dieser Arbeit erläutert.}},
  author       = {{Bender, Amelie and Kaul, Thorben and Sextro, Walter}},
  booktitle    = {{Verlagsschriftenreihe des Heinz Nixdorf Instituts Band 369, Paderborn, 2017}},
  keywords     = {{Zustandsüberwachung, Condition Monitoring, Prognose, Gummi-Metall-Elemente, Restlebensdauerschätzung}},
  pages        = {{347--358}},
  title        = {{{Entwicklung eines Condition Monitoring Systems für Gummi-Metall-Elemente}}},
  year         = {{2017}},
}