[{"citation":{"ieee":"S. Kruse, J. Diri, T. Mager, C. Kress, and J. C. Scheytt, “Electrooptical Integration of an Electronic Photonic Integrated Circuit Into Plastic Substrates Using Mid-Technology,” in 2025 55th European Microwave Conference (EuMC), 2025, pp. 127–130, doi: 10.23919/EuMC65286.2025.11235121.","apa":"Kruse, S., Diri, J., Mager, T., Kress, C., & Scheytt, J. C. (2025). Electrooptical Integration of an Electronic Photonic Integrated Circuit Into Plastic Substrates Using Mid-Technology. 2025 55th European Microwave Conference (EuMC), 127–130. https://doi.org/10.23919/EuMC65286.2025.11235121","chicago":"Kruse, Stephan, Jabil Diri, Thomas Mager, Christian Kress, and J. Christoph Scheytt. “Electrooptical Integration of an Electronic Photonic Integrated Circuit Into Plastic Substrates Using Mid-Technology.” In 2025 55th European Microwave Conference (EuMC), 127–30, 2025. https://doi.org/10.23919/EuMC65286.2025.11235121.","short":"S. Kruse, J. Diri, T. Mager, C. Kress, J.C. Scheytt, in: 2025 55th European Microwave Conference (EuMC), 2025, pp. 127–130.","mla":"Kruse, Stephan, et al. “Electrooptical Integration of an Electronic Photonic Integrated Circuit Into Plastic Substrates Using Mid-Technology.” 2025 55th European Microwave Conference (EuMC), 2025, pp. 127–30, doi:10.23919/EuMC65286.2025.11235121.","bibtex":"@inproceedings{Kruse_Diri_Mager_Kress_Scheytt_2025, title={Electrooptical Integration of an Electronic Photonic Integrated Circuit Into Plastic Substrates Using Mid-Technology}, DOI={10.23919/EuMC65286.2025.11235121}, booktitle={2025 55th European Microwave Conference (EuMC)}, author={Kruse, Stephan and Diri, Jabil and Mager, Thomas and Kress, Christian and Scheytt, J. Christoph}, year={2025}, pages={127–130} }","ama":"Kruse S, Diri J, Mager T, Kress C, Scheytt JC. Electrooptical Integration of an Electronic Photonic Integrated Circuit Into Plastic Substrates Using Mid-Technology. In: 2025 55th European Microwave Conference (EuMC). ; 2025:127-130. doi:10.23919/EuMC65286.2025.11235121"},"publication":"2025 55th European Microwave Conference (EuMC)","date_created":"2025-11-27T07:10:33Z","department":[{"_id":"58"},{"_id":"241"}],"type":"conference","keyword":["Optical fibers","Integrated optics","Semiconductor device measurement","Laser radar","Optical device fabrication","Photonic integrated circuits","Microwave theory and techniques","Optical fiber devices","Plastics","Substrates","Microwave photonics","photonic radar","optical LO distribution","mechatronic integrated device (MID)"],"author":[{"id":"38254","last_name":"Kruse","first_name":"Stephan","full_name":"Kruse, Stephan"},{"full_name":"Diri, Jabil","last_name":"Diri","first_name":"Jabil"},{"full_name":"Mager, Thomas","last_name":"Mager","first_name":"Thomas"},{"id":"13256","first_name":"Christian","last_name":"Kress","orcid":"0000-0002-4403-2237","full_name":"Kress, Christian"},{"orcid":"0000-0002-5950-6618 ","last_name":"Scheytt","first_name":"J. Christoph","full_name":"Scheytt, J. Christoph","id":"37144"}],"title":"Electrooptical Integration of an Electronic Photonic Integrated Circuit Into Plastic Substrates Using Mid-Technology","year":"2025","status":"public","date_updated":"2025-11-27T07:12:30Z","language":[{"iso":"eng"}],"_id":"62641","page":"127-130","user_id":"38254","doi":"10.23919/EuMC65286.2025.11235121"},{"issue":"7","publication":"Polymer Chemistry","abstract":[{"lang":"eng","text":"An SPR-based dually crosslinked gel sensor for adiponitrile bearing pillar[5]arene responsive sites with a low limit of detection was developed."}],"date_created":"2024-04-03T10:57:17Z","type":"journal_article","keyword":["Organic Chemistry","Polymers and Plastics","Biochemistry","Bioengineering"],"department":[{"_id":"163"}],"title":"Pillar[5]arene-based dually crosslinked supramolecular gel as a sensor for the detection of adiponitrile","year":"2024","author":[{"last_name":"Rodin","first_name":"Maksim","full_name":"Rodin, Maksim"},{"full_name":"Helle, David","last_name":"Helle","first_name":"David"},{"last_name":"Kuckling","first_name":"Dirk","full_name":"Kuckling, Dirk","id":"287"}],"publication_identifier":{"issn":["1759-9954","1759-9962"]},"publication_status":"published","date_updated":"2024-04-03T11:03:03Z","article_type":"original","intvolume":" 15","language":[{"iso":"eng"}],"doi":"10.1039/d3py01354e","citation":{"mla":"Rodin, Maksim, et al. “Pillar[5]Arene-Based Dually Crosslinked Supramolecular Gel as a Sensor for the Detection of Adiponitrile.” Polymer Chemistry, vol. 15, no. 7, Royal Society of Chemistry (RSC), 2024, pp. 661–79, doi:10.1039/d3py01354e.","bibtex":"@article{Rodin_Helle_Kuckling_2024, title={Pillar[5]arene-based dually crosslinked supramolecular gel as a sensor for the detection of adiponitrile}, volume={15}, DOI={10.1039/d3py01354e}, number={7}, journal={Polymer Chemistry}, publisher={Royal Society of Chemistry (RSC)}, author={Rodin, Maksim and Helle, David and Kuckling, Dirk}, year={2024}, pages={661–679} }","ama":"Rodin M, Helle D, Kuckling D. Pillar[5]arene-based dually crosslinked supramolecular gel as a sensor for the detection of adiponitrile. Polymer Chemistry. 2024;15(7):661-679. doi:10.1039/d3py01354e","ieee":"M. Rodin, D. Helle, and D. Kuckling, “Pillar[5]arene-based dually crosslinked supramolecular gel as a sensor for the detection of adiponitrile,” Polymer Chemistry, vol. 15, no. 7, pp. 661–679, 2024, doi: 10.1039/d3py01354e.","apa":"Rodin, M., Helle, D., & Kuckling, D. (2024). Pillar[5]arene-based dually crosslinked supramolecular gel as a sensor for the detection of adiponitrile. Polymer Chemistry, 15(7), 661–679. https://doi.org/10.1039/d3py01354e","short":"M. Rodin, D. Helle, D. Kuckling, Polymer Chemistry 15 (2024) 661–679.","chicago":"Rodin, Maksim, David Helle, and Dirk Kuckling. “Pillar[5]Arene-Based Dually Crosslinked Supramolecular Gel as a Sensor for the Detection of Adiponitrile.” Polymer Chemistry 15, no. 7 (2024): 661–79. https://doi.org/10.1039/d3py01354e."},"status":"public","page":"661-679","_id":"53163","publisher":"Royal Society of Chemistry (RSC)","user_id":"94","volume":15},{"_id":"62078","publisher":"European Society for Composite Materials (ESCM)","page":"1252–1259","volume":3,"user_id":"105344","status":"public","citation":{"bibtex":"@inproceedings{Gerritzen_Hornig_Winkler_Gude_2024, title={Direct parameter identification for highly nonlinear strain rate dependent constitutive models using machine learning}, volume={3}, DOI={10.60691/yj56-np80}, booktitle={ECCM21 - Proceedings of the 21st European Conference on Composite Materials}, publisher={European Society for Composite Materials (ESCM)}, author={Gerritzen, Johannes and Hornig, Andreas and Winkler, Peter and Gude, Maik}, year={2024}, pages={1252–1259} }","chicago":"Gerritzen, Johannes, Andreas Hornig, Peter Winkler, and Maik Gude. “Direct Parameter Identification for Highly Nonlinear Strain Rate Dependent Constitutive Models Using Machine Learning.” In ECCM21 - Proceedings of the 21st European Conference on Composite Materials, 3:1252–1259. European Society for Composite Materials (ESCM), 2024. https://doi.org/10.60691/yj56-np80.","ama":"Gerritzen J, Hornig A, Winkler P, Gude M. Direct parameter identification for highly nonlinear strain rate dependent constitutive models using machine learning. In: ECCM21 - Proceedings of the 21st European Conference on Composite Materials. Vol 3. European Society for Composite Materials (ESCM); 2024:1252–1259. doi:10.60691/yj56-np80","short":"J. Gerritzen, A. Hornig, P. Winkler, M. Gude, in: ECCM21 - Proceedings of the 21st European Conference on Composite Materials, European Society for Composite Materials (ESCM), 2024, pp. 1252–1259.","ieee":"J. Gerritzen, A. Hornig, P. Winkler, and M. Gude, “Direct parameter identification for highly nonlinear strain rate dependent constitutive models using machine learning,” in ECCM21 - Proceedings of the 21st European Conference on Composite Materials, 2024, vol. 3, pp. 1252–1259, doi: 10.60691/yj56-np80.","mla":"Gerritzen, Johannes, et al. “Direct Parameter Identification for Highly Nonlinear Strain Rate Dependent Constitutive Models Using Machine Learning.” ECCM21 - Proceedings of the 21st European Conference on Composite Materials, vol. 3, European Society for Composite Materials (ESCM), 2024, pp. 1252–1259, doi:10.60691/yj56-np80.","apa":"Gerritzen, J., Hornig, A., Winkler, P., & Gude, M. (2024). Direct parameter identification for highly nonlinear strain rate dependent constitutive models using machine learning. ECCM21 - Proceedings of the 21st European Conference on Composite Materials, 3, 1252–1259. https://doi.org/10.60691/yj56-np80"},"project":[{"name":"TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten","_id":"130"},{"name":"TRR 285 - Subproject A03","_id":"137"},{"_id":"131","name":"TRR 285 - Project Area A"}],"language":[{"iso":"eng"}],"doi":"10.60691/yj56-np80","author":[{"id":"105344","orcid":"0000-0002-0169-8602","first_name":"Johannes","last_name":"Gerritzen","full_name":"Gerritzen, Johannes"},{"full_name":"Hornig, Andreas","first_name":"Andreas","last_name":"Hornig"},{"first_name":"Peter","last_name":"Winkler","full_name":"Winkler, Peter"},{"last_name":"Gude","first_name":"Maik","full_name":"Gude, Maik"}],"publication_identifier":{"isbn":["978-2-912985-01-9"]},"title":"Direct parameter identification for highly nonlinear strain rate dependent constitutive models using machine learning","year":"2024","intvolume":" 3","date_updated":"2026-02-27T06:46:21Z","date_created":"2025-11-04T12:47:06Z","type":"conference","keyword":["Direct parameter identification","Machine learning","Convolutional neural networks","Strain rate dependency","Fiber reinforced plastics","woven composites","segmentation","synthetic training data","x-ray computed tomography"],"publication":"ECCM21 - Proceedings of the 21st European Conference on Composite Materials","abstract":[{"lang":"eng","text":"Fiber reinforced plastics (FRP) exhibit strongly non-linear deformation behavior. To capture this in simulations, intricate models with a variety of parameters are typically used. The identification of values for such parameters is highly challenging and requires in depth understanding of the model itself. Machine learning (ML) is a promising approach for alleviating this challenge by directly predicting parameters based on experimental results. So far, this works mostly for purely artificial data. In this work, two approaches to generalize to experimental data are investigated: a sequential approach, leveraging understanding of the constitutive model and a direct, purely data driven approach. This is exemplary carried out for a highly non-linear strain rate dependent constitutive model for the shear behavior of FRP.The sequential model is found to work better on both artificial and experimental data. It is capable of extracting well suited parameters from the artificial data under realistic conditions. For the experimental data, the model performance depends on the composition of the experimental curves, varying between excellently suiting and reasonable predictions. Taking the expert knowledge into account for ML-model training led to far better results than the purely data driven approach. Robustifying the model predictions on experimental data promises further improvement. "}]},{"oa":"1","citation":{"short":"E. Moritzer, F. Hecker, Macromolecular Symposia 411 (2023).","chicago":"Moritzer, Elmar, and Felix Hecker. “Adaptive Scaling of Components in the Fused Deposition Modeling Process.” Macromolecular Symposia 411, no. 1 (2023). https://doi.org/10.1002/masy.202200181.","ieee":"E. Moritzer and F. Hecker, “Adaptive Scaling of Components in the Fused Deposition Modeling Process,” Macromolecular Symposia, vol. 411, no. 1, 2023, doi: 10.1002/masy.202200181.","apa":"Moritzer, E., & Hecker, F. (2023). Adaptive Scaling of Components in the Fused Deposition Modeling Process. Macromolecular Symposia, 411(1). https://doi.org/10.1002/masy.202200181","bibtex":"@article{Moritzer_Hecker_2023, title={Adaptive Scaling of Components in the Fused Deposition Modeling Process}, volume={411}, DOI={10.1002/masy.202200181}, number={1}, journal={Macromolecular Symposia}, publisher={Wiley}, author={Moritzer, Elmar and Hecker, Felix}, year={2023} }","ama":"Moritzer E, Hecker F. Adaptive Scaling of Components in the Fused Deposition Modeling Process. Macromolecular Symposia. 2023;411(1). doi:10.1002/masy.202200181","mla":"Moritzer, Elmar, and Felix Hecker. “Adaptive Scaling of Components in the Fused Deposition Modeling Process.” Macromolecular Symposia, vol. 411, no. 1, Wiley, 2023, doi:10.1002/masy.202200181."},"quality_controlled":"1","_id":"48277","publisher":"Wiley","volume":411,"user_id":"45537","conference":{"end_date":"2022-11-26","location":"Bukarest","start_date":"2022-11-13","name":"POLCOM 2022"},"status":"public","date_created":"2023-10-19T07:25:06Z","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"},{"_id":"219"},{"_id":"624"}],"keyword":["Materials Chemistry","Polymers and Plastics","Organic Chemistry","Condensed Matter Physics"],"type":"journal_article","publication":"Macromolecular Symposia","issue":"1","abstract":[{"text":"AbstractCurrently, the fused deposition modeling (FDM) process is the most common additive manufacturing technology. The principle of the FDM process is the strand wise deposition of molten thermoplastic polymers, by feeding a filament trough a heated nozzle. Due to the strand and layer wise deposition the cooling of the manufactured component is not uniform. This leads to dimensional deviations which may cause the component to be unusable for the desired application. In this paper, a method is described which is based on the shrinkage compensation through the adaption of every single raster line in components manufactured with the FDM process. The shrinkage compensation is based on a model resulting from a DOE which considers the main influencing factors on the shrinkage behavior of raster lines in the FDM process. An in‐house developed software analyzes the component and locally applies the shrinkage compensation with consideration of the boundary conditions, e.g., the position of the raster line in the component and the process parameters. Following, a validation using a simple geometry is conducted to show the effect of the presented adaptive scaling method.","lang":"eng"}],"language":[{"iso":"eng"}],"main_file_link":[{"url":"https://doi.org/10.1002/masy.202200181","open_access":"1"}],"doi":"10.1002/masy.202200181","author":[{"first_name":"Elmar","last_name":"Moritzer","full_name":"Moritzer, Elmar","id":"20531"},{"id":"45537","full_name":"Hecker, Felix","first_name":"Felix","last_name":"Hecker"}],"publication_identifier":{"issn":["1022-1360","1521-3900"]},"year":"2023","title":"Adaptive Scaling of Components in the Fused Deposition Modeling Process","intvolume":" 411","date_updated":"2024-02-23T08:36:42Z","publication_status":"published"},{"quality_controlled":"1","citation":{"bibtex":"@article{Moritzer_Hecker_2023, title={Adaptive Scaling of Components in the Fused Deposition Modeling Process}, volume={411}, DOI={10.1002/masy.202200181}, number={1}, journal={Macromolecular Symposia}, publisher={Wiley}, author={Moritzer, Elmar and Hecker, Felix}, year={2023} }","ama":"Moritzer E, Hecker F. Adaptive Scaling of Components in the Fused Deposition Modeling Process. Macromolecular Symposia. 2023;411(1). doi:10.1002/masy.202200181","mla":"Moritzer, Elmar, and Felix Hecker. “Adaptive Scaling of Components in the Fused Deposition Modeling Process.” Macromolecular Symposia, vol. 411, no. 1, Wiley, 2023, doi:10.1002/masy.202200181.","chicago":"Moritzer, Elmar, and Felix Hecker. “Adaptive Scaling of Components in the Fused Deposition Modeling Process.” Macromolecular Symposia 411, no. 1 (2023). https://doi.org/10.1002/masy.202200181.","short":"E. Moritzer, F. Hecker, Macromolecular Symposia 411 (2023).","ieee":"E. Moritzer and F. Hecker, “Adaptive Scaling of Components in the Fused Deposition Modeling Process,” Macromolecular Symposia, vol. 411, no. 1, 2023, doi: 10.1002/masy.202200181.","apa":"Moritzer, E., & Hecker, F. (2023). Adaptive Scaling of Components in the Fused Deposition Modeling Process. Macromolecular Symposia, 411(1). https://doi.org/10.1002/masy.202200181"},"status":"public","user_id":"44116","volume":411,"_id":"52802","publisher":"Wiley","abstract":[{"lang":"eng","text":"AbstractCurrently, the fused deposition modeling (FDM) process is the most common additive manufacturing technology. The principle of the FDM process is the strand wise deposition of molten thermoplastic polymers, by feeding a filament trough a heated nozzle. Due to the strand and layer wise deposition the cooling of the manufactured component is not uniform. This leads to dimensional deviations which may cause the component to be unusable for the desired application. In this paper, a method is described which is based on the shrinkage compensation through the adaption of every single raster line in components manufactured with the FDM process. The shrinkage compensation is based on a model resulting from a DOE which considers the main influencing factors on the shrinkage behavior of raster lines in the FDM process. An in‐house developed software analyzes the component and locally applies the shrinkage compensation with consideration of the boundary conditions, e.g., the position of the raster line in the component and the process parameters. Following, a validation using a simple geometry is conducted to show the effect of the presented adaptive scaling method."}],"issue":"1","publication":"Macromolecular Symposia","keyword":["Materials Chemistry","Polymers and Plastics","Organic Chemistry","Condensed Matter Physics"],"type":"journal_article","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"date_created":"2024-03-25T09:16:46Z","date_updated":"2024-03-25T09:17:03Z","publication_status":"published","intvolume":" 411","title":"Adaptive Scaling of Components in the Fused Deposition Modeling Process","year":"2023","author":[{"id":"20531","full_name":"Moritzer, Elmar","first_name":"Elmar","last_name":"Moritzer"},{"full_name":"Hecker, Felix","first_name":"Felix","last_name":"Hecker","id":"45537"}],"publication_identifier":{"issn":["1022-1360","1521-3900"]},"doi":"10.1002/masy.202200181","language":[{"iso":"eng"}]},{"date_updated":"2024-03-26T09:18:31Z","has_accepted_license":"1","status":"public","title":"Advances In RTM Manufacturing Of Metal-FRP Hybrids By Self-Sealing And In-Mold Cleaning Techniques","year":"2023","author":[{"id":"49504","first_name":"Deviprasad","last_name":"Chalicheemalapalli Jayasankar","orcid":"https://orcid.org/ 0000-0002-3446-2444","full_name":"Chalicheemalapalli Jayasankar, Deviprasad"}],"ddc":["670"],"user_id":"49504","language":[{"iso":"eng"}],"_id":"50449","abstract":[{"text":"The importance of fiber-reinforced plastics for lightweight construction applications is steadily increasing due to their outstanding weight-specific property values. However, a decisive disadvantage of these composite materials has so far been the high material and process costs, which is why fiber-reinforced plastics are almost exclusively used in small to medium-sized series. Optimization of manufacturing methods is of great importance to reduce the production cost. In this study, two concepts are proposed that can optimize vacuum assisted light resin transfer molding (VA-LRTM) further, leading to a possibility of fully automatic process. Conventional VA-LRTM methods are used to produce complex fiber-reinforced plastics (FRP) and hybrid components. Traditional molds used to produce components via VA-LRTM are sealed using polymer materials to prevent the leakage of matrix system. The seals undergo tremendous amounts of thermal, chemical, and mechanical loadings. Thus, sealings must be replaced in short intervals. In the current study, a concept where sealing is achieved by accelerating the curing of matrix system itself with the help of heating elements and catalysts resulting in a self-sealing approach is proposed. Another concern is mold surface contamination during component production. To address this, a modified automatic cleaning technique based on ultrasonic cleaning was proposed which can be integrated into the production line with minimum modification. Both the proposed concepts were validated and optimized using experiments, simulations, and analytical approaches by producing metal-FRP hybrid shafts.","lang":"eng"}],"file_date_updated":"2024-01-11T09:24:01Z","supervisor":[{"full_name":"Tröster, Thomas","first_name":"Thomas","last_name":"Tröster"},{"first_name":"Wolfgang","last_name":"Bremser","full_name":"Bremser, Wolfgang"}],"citation":{"ieee":"D. Chalicheemalapalli Jayasankar, Advances In RTM Manufacturing Of Metal-FRP Hybrids By Self-Sealing And In-Mold Cleaning Techniques. 2023.","apa":"Chalicheemalapalli Jayasankar, D. (2023). Advances In RTM Manufacturing Of Metal-FRP Hybrids By Self-Sealing And In-Mold Cleaning Techniques.","chicago":"Chalicheemalapalli Jayasankar, Deviprasad. Advances In RTM Manufacturing Of Metal-FRP Hybrids By Self-Sealing And In-Mold Cleaning Techniques, 2023.","short":"D. Chalicheemalapalli Jayasankar, Advances In RTM Manufacturing Of Metal-FRP Hybrids By Self-Sealing And In-Mold Cleaning Techniques, 2023.","mla":"Chalicheemalapalli Jayasankar, Deviprasad. Advances In RTM Manufacturing Of Metal-FRP Hybrids By Self-Sealing And In-Mold Cleaning Techniques. 2023.","bibtex":"@book{Chalicheemalapalli Jayasankar_2023, title={Advances In RTM Manufacturing Of Metal-FRP Hybrids By Self-Sealing And In-Mold Cleaning Techniques}, author={Chalicheemalapalli Jayasankar, Deviprasad}, year={2023} }","ama":"Chalicheemalapalli Jayasankar D. Advances In RTM Manufacturing Of Metal-FRP Hybrids By Self-Sealing And In-Mold Cleaning Techniques.; 2023."},"keyword":["fiber-reinforced plastics","resin transfer molding","composites"],"type":"dissertation","department":[{"_id":"9"},{"_id":"149"},{"_id":"321"}],"file":[{"content_type":"application/pdf","success":1,"file_id":"50451","access_level":"closed","file_size":7694237,"file_name":"01_Dissertation_CJDP_7065653_V1.pdf","date_updated":"2024-01-11T09:24:01Z","relation":"main_file","date_created":"2024-01-11T09:24:01Z","creator":"dcj"}],"date_created":"2024-01-11T09:28:04Z"},{"abstract":[{"text":"AbstractCoating medical implants with antibacterial polymers may prevent postoperative infections which are a common issue for conventional titanium implants and can even lead to implant failure. Easily applicable diblock copolymers are presented that form polymer brushes via “grafting to” mechanism on titanium and equip the modified material with antibacterial properties. The polymers carry quaternized pyridinium units to combat bacteria and phosphonic acid groups which allow the linear chains to be anchored to metal surfaces in a convenient coating process. The polymers are synthesized via reversible‐addition‐fragmentation‐chain‐transfer (RAFT) polymerization and postmodifications and are characterized using NMR spectroscopy and SEC. Low grafting densities are a major drawback of the “grafting to” approach compared to “grafting from”. Thus, the number of phosphonic acid groups in the anchor block are varied to investigate and optimize the surface binding. Modified titanium surfaces are examined regarding their composition, wetting behavior, streaming potential, and coating stability. Evaluation of the antimicrobial properties revealed reduced bacterial adhesion and biofilm formation for certain polymers, albeit the cell biocompatibility against human gingival fibroblasts is also impaired. The presented findings show the potential of easy‐to‐apply polymer coatings and aid in designing next‐generation implant surface modifications.","lang":"eng"}],"publication":"Macromolecular Materials and Engineering","issue":"8","department":[{"_id":"163"}],"keyword":["Materials Chemistry","Polymers and Plastics","Organic Chemistry","General Chemical Engineering"],"type":"journal_article","date_created":"2024-04-03T11:08:51Z","intvolume":" 308","article_type":"original","date_updated":"2024-04-03T11:10:05Z","publication_status":"published","author":[{"full_name":"Methling, Rafael","first_name":"Rafael","last_name":"Methling"},{"first_name":"Oliver","last_name":"Dückmann","full_name":"Dückmann, Oliver"},{"first_name":"Frank","last_name":"Simon","full_name":"Simon, Frank"},{"last_name":"Wolf‐Brandstetter","first_name":"Cornelia","full_name":"Wolf‐Brandstetter, Cornelia"},{"first_name":"Dirk","last_name":"Kuckling","full_name":"Kuckling, Dirk","id":"287"}],"publication_identifier":{"issn":["1438-7492","1439-2054"]},"title":"Antimicrobial Brushes on Titanium via “Grafting to” Using Phosphonic Acid/Pyridinium Containing Block Copolymers","year":"2023","doi":"10.1002/mame.202200665","language":[{"iso":"eng"}],"citation":{"chicago":"Methling, Rafael, Oliver Dückmann, Frank Simon, Cornelia Wolf‐Brandstetter, and Dirk Kuckling. “Antimicrobial Brushes on Titanium via ‘Grafting to’ Using Phosphonic Acid/Pyridinium Containing Block Copolymers.” Macromolecular Materials and Engineering 308, no. 8 (2023). https://doi.org/10.1002/mame.202200665.","short":"R. Methling, O. Dückmann, F. Simon, C. Wolf‐Brandstetter, D. Kuckling, Macromolecular Materials and Engineering 308 (2023).","apa":"Methling, R., Dückmann, O., Simon, F., Wolf‐Brandstetter, C., & Kuckling, D. (2023). Antimicrobial Brushes on Titanium via “Grafting to” Using Phosphonic Acid/Pyridinium Containing Block Copolymers. Macromolecular Materials and Engineering, 308(8). https://doi.org/10.1002/mame.202200665","ieee":"R. Methling, O. Dückmann, F. Simon, C. Wolf‐Brandstetter, and D. Kuckling, “Antimicrobial Brushes on Titanium via ‘Grafting to’ Using Phosphonic Acid/Pyridinium Containing Block Copolymers,” Macromolecular Materials and Engineering, vol. 308, no. 8, 2023, doi: 10.1002/mame.202200665.","ama":"Methling R, Dückmann O, Simon F, Wolf‐Brandstetter C, Kuckling D. Antimicrobial Brushes on Titanium via “Grafting to” Using Phosphonic Acid/Pyridinium Containing Block Copolymers. Macromolecular Materials and Engineering. 2023;308(8). doi:10.1002/mame.202200665","bibtex":"@article{Methling_Dückmann_Simon_Wolf‐Brandstetter_Kuckling_2023, title={Antimicrobial Brushes on Titanium via “Grafting to” Using Phosphonic Acid/Pyridinium Containing Block Copolymers}, volume={308}, DOI={10.1002/mame.202200665}, number={8}, journal={Macromolecular Materials and Engineering}, publisher={Wiley}, author={Methling, Rafael and Dückmann, Oliver and Simon, Frank and Wolf‐Brandstetter, Cornelia and Kuckling, Dirk}, year={2023} }","mla":"Methling, Rafael, et al. “Antimicrobial Brushes on Titanium via ‘Grafting to’ Using Phosphonic Acid/Pyridinium Containing Block Copolymers.” Macromolecular Materials and Engineering, vol. 308, no. 8, Wiley, 2023, doi:10.1002/mame.202200665."},"status":"public","volume":308,"user_id":"94","publisher":"Wiley","_id":"53170"},{"date_created":"2023-02-16T12:37:11Z","type":"journal_article","keyword":["Polymers and Plastics","General Chemical Engineering","General Chemistry"],"department":[{"_id":"9"},{"_id":"154"},{"_id":"321"}],"publication":"Fibers and Polymers","citation":{"apa":"Penner, E., Caylak, I., & Mahnken, R. (2023). Experimental Investigations of Carbon Fiber Reinforced Polymer Composites and Their Constituents to Determine Their Elastic Material Properties and Complementary Inhomogeneous Experiments with Local Strain Considerations. Fibers and Polymers. https://doi.org/10.1007/s12221-023-00122-x","ieee":"E. Penner, I. Caylak, and R. Mahnken, “Experimental Investigations of Carbon Fiber Reinforced Polymer Composites and Their Constituents to Determine Their Elastic Material Properties and Complementary Inhomogeneous Experiments with Local Strain Considerations,” Fibers and Polymers, 2023, doi: 10.1007/s12221-023-00122-x.","chicago":"Penner, Eduard, Ismail Caylak, and Rolf Mahnken. “Experimental Investigations of Carbon Fiber Reinforced Polymer Composites and Their Constituents to Determine Their Elastic Material Properties and Complementary Inhomogeneous Experiments with Local Strain Considerations.” Fibers and Polymers, 2023. https://doi.org/10.1007/s12221-023-00122-x.","short":"E. Penner, I. Caylak, R. Mahnken, Fibers and Polymers (2023).","mla":"Penner, Eduard, et al. “Experimental Investigations of Carbon Fiber Reinforced Polymer Composites and Their Constituents to Determine Their Elastic Material Properties and Complementary Inhomogeneous Experiments with Local Strain Considerations.” Fibers and Polymers, Springer Science and Business Media LLC, 2023, doi:10.1007/s12221-023-00122-x.","ama":"Penner E, Caylak I, Mahnken R. Experimental Investigations of Carbon Fiber Reinforced Polymer Composites and Their Constituents to Determine Their Elastic Material Properties and Complementary Inhomogeneous Experiments with Local Strain Considerations. Fibers and Polymers. Published online 2023. doi:10.1007/s12221-023-00122-x","bibtex":"@article{Penner_Caylak_Mahnken_2023, title={Experimental Investigations of Carbon Fiber Reinforced Polymer Composites and Their Constituents to Determine Their Elastic Material Properties and Complementary Inhomogeneous Experiments with Local Strain Considerations}, DOI={10.1007/s12221-023-00122-x}, journal={Fibers and Polymers}, publisher={Springer Science and Business Media LLC}, author={Penner, Eduard and Caylak, Ismail and Mahnken, Rolf}, year={2023} }"},"abstract":[{"lang":"eng","text":"AbstractComposite materials, such as fiber reinforced polymers, become increasingly important due to their excellent mechanical and lightweight properties. In this respect, this paper reports the characterization of a unidirectional carbon fiber reinforced polymer composite material. Particularly, the mechanical behavior of the overall composite and of the individual constituents of the composite is investigated. To this end, tensile and shear tests are performed for the composite. As a result, statistics for five transversely isotropic material parameters can be established for the composite. For the description of the mechanical properties of the constituents, tensile tests for the carbon fiber as well as for the polymer matrix are carried out. In addition, the volume fraction of fibers in the matrix is determined experimentally using an ashing technique and Archimedes’ principle. For the Young’s modulus of the fiber, the Young’s modulus and transverse contraction of the matrix, as well as the volume fraction of the constituents, statistics can be concluded. The resulting mechanical properties on both scales are useful for the application and validation of different material models and homogenization methods. Finally, in order to validate the obtained properties in the future, inhomogeneous tests were performed, once a flat plate with a hole and a flat plate with semicircular notches."}],"_id":"42165","language":[{"iso":"eng"}],"publisher":"Springer Science and Business Media LLC","user_id":"335","doi":"10.1007/s12221-023-00122-x","status":"public","title":"Experimental Investigations of Carbon Fiber Reinforced Polymer Composites and Their Constituents to Determine Their Elastic Material Properties and Complementary Inhomogeneous Experiments with Local Strain Considerations","year":"2023","publication_identifier":{"issn":["1229-9197","1875-0052"]},"author":[{"last_name":"Penner","first_name":"Eduard","full_name":"Penner, Eduard"},{"id":"75","first_name":"Ismail","last_name":"Caylak","full_name":"Caylak, Ismail"},{"id":"335","full_name":"Mahnken, Rolf","last_name":"Mahnken","first_name":"Rolf"}],"publication_status":"published","date_updated":"2023-03-24T08:42:33Z"},{"intvolume":" 5","publication_status":"published","date_updated":"2023-03-13T12:39:28Z","publication_identifier":{"issn":["2637-6105","2637-6105"]},"author":[{"full_name":"Cara, Eleonora","last_name":"Cara","first_name":"Eleonora"},{"first_name":"Philipp","last_name":"Hönicke","full_name":"Hönicke, Philipp"},{"full_name":"Kayser, Yves","first_name":"Yves","last_name":"Kayser"},{"id":"20797","last_name":"Lindner","first_name":"Jörg K. N.","full_name":"Lindner, Jörg K. N."},{"full_name":"Castellino, Micaela","first_name":"Micaela","last_name":"Castellino"},{"first_name":"Irdi","last_name":"Murataj","full_name":"Murataj, Irdi"},{"last_name":"Porro","first_name":"Samuele","full_name":"Porro, Samuele"},{"full_name":"Angelini, Angelo","first_name":"Angelo","last_name":"Angelini"},{"last_name":"De Leo","first_name":"Natascia","full_name":"De Leo, Natascia"},{"last_name":"Pirri","first_name":"Candido Fabrizio","full_name":"Pirri, Candido Fabrizio"},{"last_name":"Beckhoff","first_name":"Burkhard","full_name":"Beckhoff, Burkhard"},{"last_name":"Boarino","first_name":"Luca","full_name":"Boarino, Luca"},{"full_name":"Ferrarese Lupi, Federico","first_name":"Federico","last_name":"Ferrarese Lupi"}],"year":"2023","title":"Developing Quantitative Nondestructive Characterization of Nanomaterials: A Case Study on Sequential Infiltration Synthesis of Block Copolymers","doi":"10.1021/acsapm.2c02094","language":[{"iso":"eng"}],"issue":"3","publication":"ACS Applied Polymer Materials","department":[{"_id":"15"}],"type":"journal_article","keyword":["Organic Chemistry","Polymers and Plastics","Process Chemistry and Technology"],"date_created":"2023-03-13T12:37:25Z","status":"public","volume":5,"user_id":"77496","publisher":"American Chemical Society (ACS)","_id":"42953","page":"2079-2087","citation":{"mla":"Cara, Eleonora, et al. “Developing Quantitative Nondestructive Characterization of Nanomaterials: A Case Study on Sequential Infiltration Synthesis of Block Copolymers.” ACS Applied Polymer Materials, vol. 5, no. 3, American Chemical Society (ACS), 2023, pp. 2079–87, doi:10.1021/acsapm.2c02094.","ama":"Cara E, Hönicke P, Kayser Y, et al. Developing Quantitative Nondestructive Characterization of Nanomaterials: A Case Study on Sequential Infiltration Synthesis of Block Copolymers. ACS Applied Polymer Materials. 2023;5(3):2079-2087. doi:10.1021/acsapm.2c02094","bibtex":"@article{Cara_Hönicke_Kayser_Lindner_Castellino_Murataj_Porro_Angelini_De Leo_Pirri_et al._2023, title={Developing Quantitative Nondestructive Characterization of Nanomaterials: A Case Study on Sequential Infiltration Synthesis of Block Copolymers}, volume={5}, DOI={10.1021/acsapm.2c02094}, number={3}, journal={ACS Applied Polymer Materials}, publisher={American Chemical Society (ACS)}, author={Cara, Eleonora and Hönicke, Philipp and Kayser, Yves and Lindner, Jörg K. N. and Castellino, Micaela and Murataj, Irdi and Porro, Samuele and Angelini, Angelo and De Leo, Natascia and Pirri, Candido Fabrizio and et al.}, year={2023}, pages={2079–2087} }","apa":"Cara, E., Hönicke, P., Kayser, Y., Lindner, J. K. N., Castellino, M., Murataj, I., Porro, S., Angelini, A., De Leo, N., Pirri, C. F., Beckhoff, B., Boarino, L., & Ferrarese Lupi, F. (2023). Developing Quantitative Nondestructive Characterization of Nanomaterials: A Case Study on Sequential Infiltration Synthesis of Block Copolymers. ACS Applied Polymer Materials, 5(3), 2079–2087. https://doi.org/10.1021/acsapm.2c02094","ieee":"E. Cara et al., “Developing Quantitative Nondestructive Characterization of Nanomaterials: A Case Study on Sequential Infiltration Synthesis of Block Copolymers,” ACS Applied Polymer Materials, vol. 5, no. 3, pp. 2079–2087, 2023, doi: 10.1021/acsapm.2c02094.","chicago":"Cara, Eleonora, Philipp Hönicke, Yves Kayser, Jörg K. N. Lindner, Micaela Castellino, Irdi Murataj, Samuele Porro, et al. “Developing Quantitative Nondestructive Characterization of Nanomaterials: A Case Study on Sequential Infiltration Synthesis of Block Copolymers.” ACS Applied Polymer Materials 5, no. 3 (2023): 2079–87. https://doi.org/10.1021/acsapm.2c02094.","short":"E. Cara, P. Hönicke, Y. Kayser, J.K.N. Lindner, M. Castellino, I. Murataj, S. Porro, A. Angelini, N. De Leo, C.F. Pirri, B. Beckhoff, L. Boarino, F. Ferrarese Lupi, ACS Applied Polymer Materials 5 (2023) 2079–2087."}},{"publication_status":"published","date_updated":"2023-04-26T13:40:19Z","intvolume":" 59","year":"2023","title":"Morphological and mechanical properties of foamed thick-walled Wood-Plastic-Composite structures","publication_identifier":{"issn":["0021-955X","1530-7999"]},"author":[{"id":"20531","full_name":"Moritzer, Elmar","last_name":"Moritzer","first_name":"Elmar"},{"id":"38212","orcid":"0000-0002-7651-7028","last_name":"Flachmann","first_name":"Felix","full_name":"Flachmann, Felix"}],"doi":"10.1177/0021955x231161175","main_file_link":[{"open_access":"1"}],"language":[{"iso":"eng"}],"abstract":[{"lang":"eng","text":" Microcellular wood fiber reinforced polymers offer the possibility to reduce the use of fossil raw materials. In particular, thick-walled structures with thicknesses greater than 6 mm offer a high potential for weight savings. This study investigates the cell structures and mechanical properties of injection-molded test specimens. The influence of different thicknesses (6–10 mm) along with different chemical blowing agents (endothermic, exothermic) with varying dosages (0–2 wt%) is analyzed. The investigations reveal that exothermic chemical blowing agents form finer cells consistently to thin-walled structures than endothermic ones. Higher foaming agent content leads to higher pore fractions, with many small cells coalescing into a large open-pore cell network. The mechanical properties depend mainly on the pore content of the sample. The specific tensile properties deteriorate with the use of chemical blowing agents (CFA), whereas the sandwich structure produced with compact edge layers has a positive influence on the specific flexural properties. "}],"issue":"3","publication":"Journal of Cellular Plastics","keyword":["Materials Chemistry","Polymers and Plastics","General Chemistry"],"type":"journal_article","department":[{"_id":"321"},{"_id":"9"},{"_id":"367"},{"_id":"147"}],"date_created":"2023-02-27T07:11:52Z","status":"public","user_id":"38212","volume":59,"page":"187-199","publisher":"SAGE Publications","_id":"42515","quality_controlled":"1","citation":{"apa":"Moritzer, E., & Flachmann, F. (2023). Morphological and mechanical properties of foamed thick-walled Wood-Plastic-Composite structures. Journal of Cellular Plastics, 59(3), 187–199. https://doi.org/10.1177/0021955x231161175","ieee":"E. Moritzer and F. Flachmann, “Morphological and mechanical properties of foamed thick-walled Wood-Plastic-Composite structures,” Journal of Cellular Plastics, vol. 59, no. 3, pp. 187–199, 2023, doi: 10.1177/0021955x231161175.","chicago":"Moritzer, Elmar, and Felix Flachmann. “Morphological and Mechanical Properties of Foamed Thick-Walled Wood-Plastic-Composite Structures.” Journal of Cellular Plastics 59, no. 3 (2023): 187–99. https://doi.org/10.1177/0021955x231161175.","short":"E. Moritzer, F. Flachmann, Journal of Cellular Plastics 59 (2023) 187–199.","mla":"Moritzer, Elmar, and Felix Flachmann. “Morphological and Mechanical Properties of Foamed Thick-Walled Wood-Plastic-Composite Structures.” Journal of Cellular Plastics, vol. 59, no. 3, SAGE Publications, 2023, pp. 187–99, doi:10.1177/0021955x231161175.","ama":"Moritzer E, Flachmann F. Morphological and mechanical properties of foamed thick-walled Wood-Plastic-Composite structures. Journal of Cellular Plastics. 2023;59(3):187-199. doi:10.1177/0021955x231161175","bibtex":"@article{Moritzer_Flachmann_2023, title={Morphological and mechanical properties of foamed thick-walled Wood-Plastic-Composite structures}, volume={59}, DOI={10.1177/0021955x231161175}, number={3}, journal={Journal of Cellular Plastics}, publisher={SAGE Publications}, author={Moritzer, Elmar and Flachmann, Felix}, year={2023}, pages={187–199} }"},"oa":"1"},{"citation":{"chicago":"Chudalla, Nick, Gerson Meschut, Aurélie Bartley, and Tim Michael Wibbeke. “Bauteilschonendes Entfügen struktureller Klebverbindungen durch Kälte.” adhäsion KLEBEN & DICHTEN 66, no. 4 (2022): 34–37. https://doi.org/10.1007/s35145-022-0576-0.","short":"N. Chudalla, G. Meschut, A. Bartley, T.M. Wibbeke, adhäsion KLEBEN & DICHTEN 66 (2022) 34–37.","ieee":"N. Chudalla, G. Meschut, A. Bartley, and T. M. Wibbeke, “Bauteilschonendes Entfügen struktureller Klebverbindungen durch Kälte,” adhäsion KLEBEN & DICHTEN, vol. 66, no. 4, pp. 34–37, 2022, doi: 10.1007/s35145-022-0576-0.","apa":"Chudalla, N., Meschut, G., Bartley, A., & Wibbeke, T. M. (2022). Bauteilschonendes Entfügen struktureller Klebverbindungen durch Kälte. adhäsion KLEBEN & DICHTEN, 66(4), 34–37. https://doi.org/10.1007/s35145-022-0576-0","bibtex":"@article{Chudalla_Meschut_Bartley_Wibbeke_2022, title={Bauteilschonendes Entfügen struktureller Klebverbindungen durch Kälte}, volume={66}, DOI={10.1007/s35145-022-0576-0}, number={4}, journal={adhäsion KLEBEN & DICHTEN}, publisher={Springer Science and Business Media LLC}, author={Chudalla, Nick and Meschut, Gerson and Bartley, Aurélie and Wibbeke, Tim Michael}, year={2022}, pages={34–37} }","ama":"Chudalla N, Meschut G, Bartley A, Wibbeke TM. Bauteilschonendes Entfügen struktureller Klebverbindungen durch Kälte. adhäsion KLEBEN & DICHTEN. 2022;66(4):34-37. doi:10.1007/s35145-022-0576-0","mla":"Chudalla, Nick, et al. “Bauteilschonendes Entfügen struktureller Klebverbindungen durch Kälte.” adhäsion KLEBEN & DICHTEN, vol. 66, no. 4, Springer Science and Business Media LLC, 2022, pp. 34–37, doi:10.1007/s35145-022-0576-0."},"status":"public","user_id":"41235","volume":66,"page":"34-37","_id":"30915","publisher":"Springer Science and Business Media LLC","publication":"adhäsion KLEBEN & DICHTEN","issue":"4","keyword":["Polymers and Plastics","General Chemical Engineering","General Chemistry"],"type":"journal_article","department":[{"_id":"157"}],"date_created":"2022-04-19T12:02:58Z","date_updated":"2022-05-03T06:57:23Z","publication_status":"published","intvolume":" 66","year":"2022","title":"Bauteilschonendes Entfügen struktureller Klebverbindungen durch Kälte","author":[{"id":"41235","last_name":"Chudalla","first_name":"Nick","full_name":"Chudalla, Nick"},{"id":"32056","full_name":"Meschut, Gerson","first_name":"Gerson","orcid":"0000-0002-2763-1246","last_name":"Meschut"},{"first_name":"Aurélie","last_name":"Bartley","full_name":"Bartley, Aurélie"},{"first_name":"Tim Michael","last_name":"Wibbeke","full_name":"Wibbeke, Tim Michael"}],"publication_identifier":{"issn":["1619-1919","2192-8681"]},"doi":"10.1007/s35145-022-0576-0","language":[{"iso":"ger"}]},{"citation":{"mla":"Hoppe, Christian, et al. “Influence of Surface Activation on the Microporosity of PE‐CVD and PE‐ALD SiO x Thin Films on PDMS.” Plasma Processes and Polymers, vol. 19, no. 4, 2100174, Wiley, 2022, doi:10.1002/ppap.202100174.","ama":"Hoppe C, Mitschker F, Mai L, et al. Influence of surface activation on the microporosity of PE‐CVD and PE‐ALD SiO x thin films on PDMS. Plasma Processes and Polymers. 2022;19(4). doi:10.1002/ppap.202100174","bibtex":"@article{Hoppe_Mitschker_Mai_Liedke_Arcos_Awakowicz_Devi_Attallah_Butterling_Wagner_et al._2022, title={Influence of surface activation on the microporosity of PE‐CVD and PE‐ALD SiO x thin films on PDMS}, volume={19}, DOI={10.1002/ppap.202100174}, number={42100174}, journal={Plasma Processes and Polymers}, publisher={Wiley}, author={Hoppe, Christian and Mitschker, Felix and Mai, Lukas and Liedke, Maciej Oskar and Arcos, Teresa and Awakowicz, Peter and Devi, Anjana and Attallah, Ahmed Gamal and Butterling, Maik and Wagner, Andreas and et al.}, year={2022} }","apa":"Hoppe, C., Mitschker, F., Mai, L., Liedke, M. O., Arcos, T., Awakowicz, P., Devi, A., Attallah, A. G., Butterling, M., Wagner, A., & Grundmeier, G. (2022). Influence of surface activation on the microporosity of PE‐CVD and PE‐ALD SiO x thin films on PDMS. Plasma Processes and Polymers, 19(4), Article 2100174. https://doi.org/10.1002/ppap.202100174","ieee":"C. Hoppe et al., “Influence of surface activation on the microporosity of PE‐CVD and PE‐ALD SiO x thin films on PDMS,” Plasma Processes and Polymers, vol. 19, no. 4, Art. no. 2100174, 2022, doi: 10.1002/ppap.202100174.","chicago":"Hoppe, Christian, Felix Mitschker, Lukas Mai, Maciej Oskar Liedke, Teresa Arcos, Peter Awakowicz, Anjana Devi, et al. “Influence of Surface Activation on the Microporosity of PE‐CVD and PE‐ALD SiO x Thin Films on PDMS.” Plasma Processes and Polymers 19, no. 4 (2022). https://doi.org/10.1002/ppap.202100174.","short":"C. Hoppe, F. Mitschker, L. Mai, M.O. Liedke, T. Arcos, P. Awakowicz, A. Devi, A.G. Attallah, M. Butterling, A. Wagner, G. Grundmeier, Plasma Processes and Polymers 19 (2022)."},"user_id":"48864","volume":19,"publisher":"Wiley","_id":"34648","status":"public","keyword":["Polymers and Plastics","Condensed Matter Physics"],"type":"journal_article","department":[{"_id":"302"}],"date_created":"2022-12-21T09:32:52Z","publication":"Plasma Processes and Polymers","issue":"4","doi":"10.1002/ppap.202100174","article_number":"2100174","language":[{"iso":"eng"}],"date_updated":"2022-12-21T09:33:14Z","publication_status":"published","intvolume":" 19","title":"Influence of surface activation on the microporosity of PE‐CVD and PE‐ALD SiO x thin films on PDMS","year":"2022","author":[{"full_name":"Hoppe, Christian","last_name":"Hoppe","first_name":"Christian","id":"27401"},{"last_name":"Mitschker","first_name":"Felix","full_name":"Mitschker, Felix"},{"full_name":"Mai, Lukas","first_name":"Lukas","last_name":"Mai"},{"full_name":"Liedke, Maciej Oskar","first_name":"Maciej Oskar","last_name":"Liedke"},{"full_name":"Arcos, Teresa","first_name":"Teresa","last_name":"Arcos"},{"last_name":"Awakowicz","first_name":"Peter","full_name":"Awakowicz, Peter"},{"full_name":"Devi, Anjana","last_name":"Devi","first_name":"Anjana"},{"first_name":"Ahmed Gamal","last_name":"Attallah","full_name":"Attallah, Ahmed Gamal"},{"full_name":"Butterling, Maik","first_name":"Maik","last_name":"Butterling"},{"full_name":"Wagner, Andreas","first_name":"Andreas","last_name":"Wagner"},{"last_name":"Grundmeier","first_name":"Guido","full_name":"Grundmeier, Guido","id":"194"}],"publication_identifier":{"issn":["1612-8850","1612-8869"]}},{"type":"journal_article","keyword":["Polymers and Plastics","Condensed Matter Physics"],"department":[{"_id":"302"}],"date_created":"2022-12-21T09:33:54Z","issue":"11","publication":"Plasma Processes and Polymers","doi":"10.1002/ppap.202200052","article_number":"2200052","language":[{"iso":"eng"}],"date_updated":"2022-12-21T09:34:05Z","publication_status":"published","intvolume":" 19","title":"Comparative analysis of hexamethyldisiloxane and hexamethyldisilazane plasma polymer thin films before and after plasma oxidation","year":"2022","publication_identifier":{"issn":["1612-8850","1612-8869"]},"author":[{"full_name":"Xie, Xiaofan","last_name":"Xie","first_name":"Xiaofan"},{"full_name":"de los Arcos, Teresa","last_name":"de los Arcos","first_name":"Teresa"},{"first_name":"Guido","last_name":"Grundmeier","full_name":"Grundmeier, Guido","id":"194"}],"citation":{"mla":"Xie, Xiaofan, et al. “Comparative Analysis of Hexamethyldisiloxane and Hexamethyldisilazane Plasma Polymer Thin Films before and after Plasma Oxidation.” Plasma Processes and Polymers, vol. 19, no. 11, 2200052, Wiley, 2022, doi:10.1002/ppap.202200052.","ama":"Xie X, de los Arcos T, Grundmeier G. Comparative analysis of hexamethyldisiloxane and hexamethyldisilazane plasma polymer thin films before and after plasma oxidation. Plasma Processes and Polymers. 2022;19(11). doi:10.1002/ppap.202200052","bibtex":"@article{Xie_de los Arcos_Grundmeier_2022, title={Comparative analysis of hexamethyldisiloxane and hexamethyldisilazane plasma polymer thin films before and after plasma oxidation}, volume={19}, DOI={10.1002/ppap.202200052}, number={112200052}, journal={Plasma Processes and Polymers}, publisher={Wiley}, author={Xie, Xiaofan and de los Arcos, Teresa and Grundmeier, Guido}, year={2022} }","apa":"Xie, X., de los Arcos, T., & Grundmeier, G. (2022). Comparative analysis of hexamethyldisiloxane and hexamethyldisilazane plasma polymer thin films before and after plasma oxidation. Plasma Processes and Polymers, 19(11), Article 2200052. https://doi.org/10.1002/ppap.202200052","ieee":"X. Xie, T. de los Arcos, and G. Grundmeier, “Comparative analysis of hexamethyldisiloxane and hexamethyldisilazane plasma polymer thin films before and after plasma oxidation,” Plasma Processes and Polymers, vol. 19, no. 11, Art. no. 2200052, 2022, doi: 10.1002/ppap.202200052.","chicago":"Xie, Xiaofan, Teresa de los Arcos, and Guido Grundmeier. “Comparative Analysis of Hexamethyldisiloxane and Hexamethyldisilazane Plasma Polymer Thin Films before and after Plasma Oxidation.” Plasma Processes and Polymers 19, no. 11 (2022). https://doi.org/10.1002/ppap.202200052.","short":"X. Xie, T. de los Arcos, G. Grundmeier, Plasma Processes and Polymers 19 (2022)."},"user_id":"48864","volume":19,"publisher":"Wiley","_id":"34650","status":"public"},{"publication":"Polymers","issue":"22","abstract":[{"lang":"eng","text":"The paper presents research regarding a thermally supported multi-material clinching process (hotclinching) for metal and thermoplastic composite (TPC) sheets: an experimental approach to investigate the flow pressing phenomena during joining. Therefore, an experimental setup is developed to compress the TPC-specimens in out-of-plane direction with different initial TPC thicknesses and varying temperature levels. The deformed specimens are analyzed with computed tomography to investigate the resultant inner material structure at different compaction levels. The results are compared in terms of force-compaction-curves and occurring phenomena during compaction. The change of the material structure is characterized by sliding phenomena and crack initiation and growth."}],"date_created":"2022-12-06T18:51:19Z","type":"journal_article","keyword":["Polymers and Plastics","General Chemistry"],"department":[{"_id":"630"}],"title":"Warmforming Flow Pressing Characteristics of Continuous Fibre Reinforced Thermoplastic Composites","year":"2022","author":[{"last_name":"Gröger","first_name":"Benjamin","full_name":"Gröger, Benjamin"},{"first_name":"David","last_name":"Römisch","full_name":"Römisch, David"},{"full_name":"Kraus, Martin","last_name":"Kraus","first_name":"Martin"},{"last_name":"Troschitz","first_name":"Juliane","full_name":"Troschitz, Juliane"},{"last_name":"Füßel","first_name":"René","full_name":"Füßel, René"},{"full_name":"Merklein, Marion","last_name":"Merklein","first_name":"Marion"},{"full_name":"Gude, Maik","first_name":"Maik","last_name":"Gude"}],"publication_identifier":{"issn":["2073-4360"]},"date_updated":"2023-01-02T11:02:56Z","publication_status":"published","intvolume":" 14","main_file_link":[{"open_access":"1"}],"article_number":"5039","language":[{"iso":"eng"}],"doi":"10.3390/polym14225039","citation":{"bibtex":"@article{Gröger_Römisch_Kraus_Troschitz_Füßel_Merklein_Gude_2022, title={Warmforming Flow Pressing Characteristics of Continuous Fibre Reinforced Thermoplastic Composites}, volume={14}, DOI={10.3390/polym14225039}, number={225039}, journal={Polymers}, publisher={MDPI AG}, author={Gröger, Benjamin and Römisch, David and Kraus, Martin and Troschitz, Juliane and Füßel, René and Merklein, Marion and Gude, Maik}, year={2022} }","ama":"Gröger B, Römisch D, Kraus M, et al. Warmforming Flow Pressing Characteristics of Continuous Fibre Reinforced Thermoplastic Composites. Polymers. 2022;14(22). doi:10.3390/polym14225039","mla":"Gröger, Benjamin, et al. “Warmforming Flow Pressing Characteristics of Continuous Fibre Reinforced Thermoplastic Composites.” Polymers, vol. 14, no. 22, 5039, MDPI AG, 2022, doi:10.3390/polym14225039.","short":"B. Gröger, D. Römisch, M. Kraus, J. Troschitz, R. Füßel, M. Merklein, M. Gude, Polymers 14 (2022).","chicago":"Gröger, Benjamin, David Römisch, Martin Kraus, Juliane Troschitz, René Füßel, Marion Merklein, and Maik Gude. “Warmforming Flow Pressing Characteristics of Continuous Fibre Reinforced Thermoplastic Composites.” Polymers 14, no. 22 (2022). https://doi.org/10.3390/polym14225039.","ieee":"B. Gröger et al., “Warmforming Flow Pressing Characteristics of Continuous Fibre Reinforced Thermoplastic Composites,” Polymers, vol. 14, no. 22, Art. no. 5039, 2022, doi: 10.3390/polym14225039.","apa":"Gröger, B., Römisch, D., Kraus, M., Troschitz, J., Füßel, R., Merklein, M., & Gude, M. (2022). Warmforming Flow Pressing Characteristics of Continuous Fibre Reinforced Thermoplastic Composites. Polymers, 14(22), Article 5039. https://doi.org/10.3390/polym14225039"},"project":[{"grant_number":"418701707","_id":"130","name":"TRR 285: TRR 285"},{"_id":"131","name":"TRR 285 - A: TRR 285 - Project Area A"},{"_id":"137","name":"TRR 285 – A03: TRR 285 - Subproject A03"},{"_id":"133","name":"TRR 285 - C: TRR 285 - Project Area C"},{"name":"TRR 285 – C01: TRR 285 - Subproject C01","_id":"145"}],"oa":"1","status":"public","_id":"34247","publisher":"MDPI AG","user_id":"14931","volume":14},{"citation":{"mla":"Völlmecke, Katharina, et al. “Hydrogel-Based Biosensors.” Gels, vol. 8, no. 12, 768, MDPI AG, 2022, doi:10.3390/gels8120768.","ama":"Völlmecke K, Afroz R, Bierbach S, et al. Hydrogel-Based Biosensors. Gels. 2022;8(12). doi:10.3390/gels8120768","bibtex":"@article{Völlmecke_Afroz_Bierbach_Brenker_Frücht_Glass_Giebelhaus_Hoppe_Kanemaru_Lazarek_et al._2022, title={Hydrogel-Based Biosensors}, volume={8}, DOI={10.3390/gels8120768}, number={12768}, journal={Gels}, publisher={MDPI AG}, author={Völlmecke, Katharina and Afroz, Rowshon and Bierbach, Sascha and Brenker, Lee Josephine and Frücht, Sebastian and Glass, Alexandra and Giebelhaus, Ryland and Hoppe, Axel and Kanemaru, Karen and Lazarek, Michal and et al.}, year={2022} }","apa":"Völlmecke, K., Afroz, R., Bierbach, S., Brenker, L. J., Frücht, S., Glass, A., Giebelhaus, R., Hoppe, A., Kanemaru, K., Lazarek, M., Rabbe, L., Song, L., Velasco Suarez, A., Wu, S., Serpe, M., & Kuckling, D. (2022). Hydrogel-Based Biosensors. Gels, 8(12), Article 768. https://doi.org/10.3390/gels8120768","ieee":"K. Völlmecke et al., “Hydrogel-Based Biosensors,” Gels, vol. 8, no. 12, Art. no. 768, 2022, doi: 10.3390/gels8120768.","short":"K. Völlmecke, R. Afroz, S. Bierbach, L.J. Brenker, S. Frücht, A. Glass, R. Giebelhaus, A. Hoppe, K. Kanemaru, M. Lazarek, L. Rabbe, L. Song, A. Velasco Suarez, S. Wu, M. Serpe, D. Kuckling, Gels 8 (2022).","chicago":"Völlmecke, Katharina, Rowshon Afroz, Sascha Bierbach, Lee Josephine Brenker, Sebastian Frücht, Alexandra Glass, Ryland Giebelhaus, et al. “Hydrogel-Based Biosensors.” Gels 8, no. 12 (2022). https://doi.org/10.3390/gels8120768."},"publisher":"MDPI AG","_id":"35642","volume":8,"user_id":"94","status":"public","date_created":"2023-01-10T08:02:50Z","department":[{"_id":"163"}],"keyword":["Polymers and Plastics","Organic Chemistry","Biomaterials","Bioengineering"],"type":"journal_article","issue":"12","publication":"Gels","abstract":[{"text":"There is an increasing interest in sensing applications for a variety of analytes in aqueous environments, as conventional methods do not work reliably under humid conditions or they require complex equipment with experienced operators. Hydrogel sensors are easy to fabricate, are incredibly sensitive, and have broad dynamic ranges. Experiments on their robustness, reliability, and reusability have indicated the possible long-term applications of these systems in a variety of fields, including disease diagnosis, detection of pharmaceuticals, and in environmental testing. It is possible to produce hydrogels, which, upon sensing a specific analyte, can adsorb it onto their 3D-structure and can therefore be used to remove them from a given environment. High specificity can be obtained by using molecularly imprinted polymers. Typical detection principles involve optical methods including fluorescence and chemiluminescence, and volume changes in colloidal photonic crystals, as well as electrochemical methods. Here, we explore the current research utilizing hydrogel-based sensors in three main areas: (1) biomedical applications, (2) for detecting and quantifying pharmaceuticals of interest, and (3) detecting and quantifying environmental contaminants in aqueous environments.","lang":"eng"}],"language":[{"iso":"eng"}],"article_number":"768","main_file_link":[{"url":"https://www.mdpi.com/2310-2861/8/12/768"}],"doi":"10.3390/gels8120768","author":[{"first_name":"Katharina","last_name":"Völlmecke","full_name":"Völlmecke, Katharina"},{"full_name":"Afroz, Rowshon","last_name":"Afroz","first_name":"Rowshon"},{"full_name":"Bierbach, Sascha","first_name":"Sascha","last_name":"Bierbach"},{"full_name":"Brenker, Lee Josephine","first_name":"Lee Josephine","last_name":"Brenker"},{"full_name":"Frücht, Sebastian","last_name":"Frücht","first_name":"Sebastian"},{"last_name":"Glass","first_name":"Alexandra","full_name":"Glass, Alexandra"},{"last_name":"Giebelhaus","first_name":"Ryland","full_name":"Giebelhaus, Ryland"},{"last_name":"Hoppe","first_name":"Axel","full_name":"Hoppe, Axel"},{"last_name":"Kanemaru","first_name":"Karen","full_name":"Kanemaru, Karen"},{"last_name":"Lazarek","first_name":"Michal","full_name":"Lazarek, Michal"},{"last_name":"Rabbe","first_name":"Lukas","full_name":"Rabbe, Lukas"},{"last_name":"Song","first_name":"Longfei","full_name":"Song, Longfei"},{"full_name":"Velasco Suarez, Andrea","last_name":"Velasco Suarez","first_name":"Andrea"},{"last_name":"Wu","first_name":"Shuang","full_name":"Wu, Shuang"},{"full_name":"Serpe, Michael","last_name":"Serpe","first_name":"Michael"},{"id":"287","full_name":"Kuckling, Dirk","last_name":"Kuckling","first_name":"Dirk"}],"publication_identifier":{"issn":["2310-2861"]},"year":"2022","title":"Hydrogel-Based Biosensors","article_type":"review","intvolume":" 8","publication_status":"published","date_updated":"2023-01-10T08:05:30Z"},{"publication_identifier":{"issn":["2073-4360"]},"author":[{"full_name":"Rüppel, Annette","last_name":"Rüppel","first_name":"Annette"},{"last_name":"Wolff","first_name":"Susanne","full_name":"Wolff, Susanne"},{"last_name":"Oldemeier","first_name":"Jan Philipp","full_name":"Oldemeier, Jan Philipp","id":"56781"},{"first_name":"Volker","last_name":"Schöppner","full_name":"Schöppner, Volker","id":"20530"},{"last_name":"Heim","first_name":"Hans-Peter","full_name":"Heim, Hans-Peter"}],"year":"2022","title":"Influence of Processing Glass-Fiber Filled Plastics on Different Twin-Screw Extruders and Varying Screw Designs on Fiber Length and Particle Distribution","intvolume":" 14","date_updated":"2023-11-30T14:33:53Z","publication_status":"published","language":[{"iso":"eng"}],"article_number":"3113","doi":"10.3390/polym14153113","publication":"Polymers","issue":"15","abstract":[{"lang":"eng","text":"Due to their valuable properties (low weight, and good thermal and mechanical properties), glass fiber reinforced thermoplastics are becoming increasingly important. Fiber-reinforced thermoplastics are mainly manufactured by injection molding and extrusion, whereby the extrusion compounding process is primarily used to produce fiber-filled granulates. Reproducible production of high-quality components requires a granulate in which the fiber length is even and high. However, the extrusion process leads to the fact that fiber breakages can occur during processing. To enable a significant quality enhancement, experimentally validated modeling is required. In this study, short glass fiber reinforced thermoplastics (polypropylene) were produced on two different twin-screw extruders. Therefore, the machine-specific process behavior is of major interest regarding its influence. First, the fiber length change after processing was determined by experimental investigations and then simulated with the SIGMA simulation software. By comparing the simulation and experimental tests, important insights could be gained and the effects on fiber lengths could be determined in advance. The resulting fiber lengths and distributions were different, not only for different screw configurations (SC), but also for the same screw configurations on different twin-screw extruders. This may have been due to manufacturer-specific tolerances."}],"date_created":"2022-12-21T14:06:36Z","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"keyword":["Polymers and Plastics","General Chemistry"],"type":"journal_article","status":"public","publisher":"MDPI AG","_id":"34733","volume":14,"user_id":"44116","citation":{"mla":"Rüppel, Annette, et al. “Influence of Processing Glass-Fiber Filled Plastics on Different Twin-Screw Extruders and Varying Screw Designs on Fiber Length and Particle Distribution.” Polymers, vol. 14, no. 15, 3113, MDPI AG, 2022, doi:10.3390/polym14153113.","ama":"Rüppel A, Wolff S, Oldemeier JP, Schöppner V, Heim H-P. Influence of Processing Glass-Fiber Filled Plastics on Different Twin-Screw Extruders and Varying Screw Designs on Fiber Length and Particle Distribution. Polymers. 2022;14(15). doi:10.3390/polym14153113","bibtex":"@article{Rüppel_Wolff_Oldemeier_Schöppner_Heim_2022, title={Influence of Processing Glass-Fiber Filled Plastics on Different Twin-Screw Extruders and Varying Screw Designs on Fiber Length and Particle Distribution}, volume={14}, DOI={10.3390/polym14153113}, number={153113}, journal={Polymers}, publisher={MDPI AG}, author={Rüppel, Annette and Wolff, Susanne and Oldemeier, Jan Philipp and Schöppner, Volker and Heim, Hans-Peter}, year={2022} }","apa":"Rüppel, A., Wolff, S., Oldemeier, J. P., Schöppner, V., & Heim, H.-P. (2022). Influence of Processing Glass-Fiber Filled Plastics on Different Twin-Screw Extruders and Varying Screw Designs on Fiber Length and Particle Distribution. Polymers, 14(15), Article 3113. https://doi.org/10.3390/polym14153113","ieee":"A. Rüppel, S. Wolff, J. P. Oldemeier, V. Schöppner, and H.-P. Heim, “Influence of Processing Glass-Fiber Filled Plastics on Different Twin-Screw Extruders and Varying Screw Designs on Fiber Length and Particle Distribution,” Polymers, vol. 14, no. 15, Art. no. 3113, 2022, doi: 10.3390/polym14153113.","chicago":"Rüppel, Annette, Susanne Wolff, Jan Philipp Oldemeier, Volker Schöppner, and Hans-Peter Heim. “Influence of Processing Glass-Fiber Filled Plastics on Different Twin-Screw Extruders and Varying Screw Designs on Fiber Length and Particle Distribution.” Polymers 14, no. 15 (2022). https://doi.org/10.3390/polym14153113.","short":"A. Rüppel, S. Wolff, J.P. Oldemeier, V. Schöppner, H.-P. Heim, Polymers 14 (2022)."},"quality_controlled":"1"},{"_id":"36873","language":[{"iso":"eng"}],"publisher":"Wiley","article_number":"2200043","doi":"10.1002/mren.202200043","user_id":"48864","publication_identifier":{"issn":["1862-832X","1862-8338"]},"author":[{"full_name":"Neßlinger, Vanessa","first_name":"Vanessa","last_name":"Neßlinger"},{"full_name":"Welzel, Stefan","first_name":"Stefan","last_name":"Welzel"},{"full_name":"Rieker, Florian","first_name":"Florian","last_name":"Rieker"},{"full_name":"Meinderink, Dennis","last_name":"Meinderink","orcid":"0000-0002-2755-6514","first_name":"Dennis","id":"32378"},{"last_name":"Nieken","first_name":"Ulrich","full_name":"Nieken, Ulrich"},{"id":"194","first_name":"Guido","last_name":"Grundmeier","full_name":"Grundmeier, Guido"}],"status":"public","title":"Thin Organic‐Inorganic Anti‐Fouling Hybrid‐Films for Microreactor Components","year":"2022","date_updated":"2023-01-16T08:56:52Z","publication_status":"published","date_created":"2023-01-16T08:56:30Z","department":[{"_id":"302"}],"type":"journal_article","keyword":["Polymers and Plastics","General Chemical Engineering","General Chemistry"],"citation":{"ama":"Neßlinger V, Welzel S, Rieker F, Meinderink D, Nieken U, Grundmeier G. Thin Organic‐Inorganic Anti‐Fouling Hybrid‐Films for Microreactor Components. Macromolecular Reaction Engineering. Published online 2022. doi:10.1002/mren.202200043","bibtex":"@article{Neßlinger_Welzel_Rieker_Meinderink_Nieken_Grundmeier_2022, title={Thin Organic‐Inorganic Anti‐Fouling Hybrid‐Films for Microreactor Components}, DOI={10.1002/mren.202200043}, number={2200043}, journal={Macromolecular Reaction Engineering}, publisher={Wiley}, author={Neßlinger, Vanessa and Welzel, Stefan and Rieker, Florian and Meinderink, Dennis and Nieken, Ulrich and Grundmeier, Guido}, year={2022} }","mla":"Neßlinger, Vanessa, et al. “Thin Organic‐Inorganic Anti‐Fouling Hybrid‐Films for Microreactor Components.” Macromolecular Reaction Engineering, 2200043, Wiley, 2022, doi:10.1002/mren.202200043.","chicago":"Neßlinger, Vanessa, Stefan Welzel, Florian Rieker, Dennis Meinderink, Ulrich Nieken, and Guido Grundmeier. “Thin Organic‐Inorganic Anti‐Fouling Hybrid‐Films for Microreactor Components.” Macromolecular Reaction Engineering, 2022. https://doi.org/10.1002/mren.202200043.","short":"V. Neßlinger, S. Welzel, F. Rieker, D. Meinderink, U. Nieken, G. Grundmeier, Macromolecular Reaction Engineering (2022).","apa":"Neßlinger, V., Welzel, S., Rieker, F., Meinderink, D., Nieken, U., & Grundmeier, G. (2022). Thin Organic‐Inorganic Anti‐Fouling Hybrid‐Films for Microreactor Components. Macromolecular Reaction Engineering, Article 2200043. https://doi.org/10.1002/mren.202200043","ieee":"V. Neßlinger, S. Welzel, F. Rieker, D. Meinderink, U. Nieken, and G. Grundmeier, “Thin Organic‐Inorganic Anti‐Fouling Hybrid‐Films for Microreactor Components,” Macromolecular Reaction Engineering, Art. no. 2200043, 2022, doi: 10.1002/mren.202200043."},"publication":"Macromolecular Reaction Engineering"},{"publication":"Plasma Processes and Polymers","issue":"4","department":[{"_id":"302"}],"keyword":["Polymers and Plastics","Condensed Matter Physics"],"type":"journal_article","date_created":"2023-01-11T10:10:09Z","intvolume":" 19","publication_status":"published","date_updated":"2023-01-24T08:07:46Z","publication_identifier":{"issn":["1612-8850","1612-8869"]},"author":[{"full_name":"Hoppe, Christian","last_name":"Hoppe","first_name":"Christian"},{"last_name":"Mitschker","first_name":"Felix","full_name":"Mitschker, Felix"},{"full_name":"Mai, Lukas","last_name":"Mai","first_name":"Lukas"},{"last_name":"Liedke","first_name":"Maciej Oskar","full_name":"Liedke, Maciej Oskar"},{"first_name":"Maria Teresa","last_name":"de los Arcos de Pedro","full_name":"de los Arcos de Pedro, Maria Teresa","id":"54556"},{"first_name":"Peter","last_name":"Awakowicz","full_name":"Awakowicz, Peter"},{"last_name":"Devi","first_name":"Anjana","full_name":"Devi, Anjana"},{"full_name":"Attallah, Ahmed Gamal","first_name":"Ahmed Gamal","last_name":"Attallah"},{"last_name":"Butterling","first_name":"Maik","full_name":"Butterling, Maik"},{"first_name":"Andreas","last_name":"Wagner","full_name":"Wagner, Andreas"},{"full_name":"Grundmeier, Guido","first_name":"Guido","last_name":"Grundmeier"}],"title":"Influence of surface activation on the microporosity of PE‐CVD and PE‐ALD SiO x thin films on PDMS","year":"2022","doi":"10.1002/ppap.202100174","language":[{"iso":"eng"}],"article_number":"2100174","citation":{"chicago":"Hoppe, Christian, Felix Mitschker, Lukas Mai, Maciej Oskar Liedke, Maria Teresa de los Arcos de Pedro, Peter Awakowicz, Anjana Devi, et al. “Influence of Surface Activation on the Microporosity of PE‐CVD and PE‐ALD SiO x Thin Films on PDMS.” Plasma Processes and Polymers 19, no. 4 (2022). https://doi.org/10.1002/ppap.202100174.","short":"C. Hoppe, F. Mitschker, L. Mai, M.O. Liedke, M.T. de los Arcos de Pedro, P. Awakowicz, A. Devi, A.G. Attallah, M. Butterling, A. Wagner, G. Grundmeier, Plasma Processes and Polymers 19 (2022).","apa":"Hoppe, C., Mitschker, F., Mai, L., Liedke, M. O., de los Arcos de Pedro, M. T., Awakowicz, P., Devi, A., Attallah, A. G., Butterling, M., Wagner, A., & Grundmeier, G. (2022). Influence of surface activation on the microporosity of PE‐CVD and PE‐ALD SiO x thin films on PDMS. Plasma Processes and Polymers, 19(4), Article 2100174. https://doi.org/10.1002/ppap.202100174","ieee":"C. Hoppe et al., “Influence of surface activation on the microporosity of PE‐CVD and PE‐ALD SiO x thin films on PDMS,” Plasma Processes and Polymers, vol. 19, no. 4, Art. no. 2100174, 2022, doi: 10.1002/ppap.202100174.","ama":"Hoppe C, Mitschker F, Mai L, et al. Influence of surface activation on the microporosity of PE‐CVD and PE‐ALD SiO x thin films on PDMS. Plasma Processes and Polymers. 2022;19(4). doi:10.1002/ppap.202100174","bibtex":"@article{Hoppe_Mitschker_Mai_Liedke_de los Arcos de Pedro_Awakowicz_Devi_Attallah_Butterling_Wagner_et al._2022, title={Influence of surface activation on the microporosity of PE‐CVD and PE‐ALD SiO x thin films on PDMS}, volume={19}, DOI={10.1002/ppap.202100174}, number={42100174}, journal={Plasma Processes and Polymers}, publisher={Wiley}, author={Hoppe, Christian and Mitschker, Felix and Mai, Lukas and Liedke, Maciej Oskar and de los Arcos de Pedro, Maria Teresa and Awakowicz, Peter and Devi, Anjana and Attallah, Ahmed Gamal and Butterling, Maik and Wagner, Andreas and et al.}, year={2022} }","mla":"Hoppe, Christian, et al. “Influence of Surface Activation on the Microporosity of PE‐CVD and PE‐ALD SiO x Thin Films on PDMS.” Plasma Processes and Polymers, vol. 19, no. 4, 2100174, Wiley, 2022, doi:10.1002/ppap.202100174."},"status":"public","volume":19,"user_id":"54556","_id":"35977","publisher":"Wiley"},{"volume":19,"user_id":"54556","_id":"35974","publisher":"Wiley","status":"public","citation":{"apa":"Xie, X., de los Arcos de Pedro, M. T., & Grundmeier, G. (2022). Comparative analysis of hexamethyldisiloxane and hexamethyldisilazane plasma polymer thin films before and after plasma oxidation. Plasma Processes and Polymers, 19(11), Article 2200052. https://doi.org/10.1002/ppap.202200052","ieee":"X. Xie, M. T. de los Arcos de Pedro, and G. Grundmeier, “Comparative analysis of hexamethyldisiloxane and hexamethyldisilazane plasma polymer thin films before and after plasma oxidation,” Plasma Processes and Polymers, vol. 19, no. 11, Art. no. 2200052, 2022, doi: 10.1002/ppap.202200052.","short":"X. Xie, M.T. de los Arcos de Pedro, G. Grundmeier, Plasma Processes and Polymers 19 (2022).","chicago":"Xie, Xiaofan, Maria Teresa de los Arcos de Pedro, and Guido Grundmeier. “Comparative Analysis of Hexamethyldisiloxane and Hexamethyldisilazane Plasma Polymer Thin Films before and after Plasma Oxidation.” Plasma Processes and Polymers 19, no. 11 (2022). https://doi.org/10.1002/ppap.202200052.","mla":"Xie, Xiaofan, et al. “Comparative Analysis of Hexamethyldisiloxane and Hexamethyldisilazane Plasma Polymer Thin Films before and after Plasma Oxidation.” Plasma Processes and Polymers, vol. 19, no. 11, 2200052, Wiley, 2022, doi:10.1002/ppap.202200052.","ama":"Xie X, de los Arcos de Pedro MT, Grundmeier G. Comparative analysis of hexamethyldisiloxane and hexamethyldisilazane plasma polymer thin films before and after plasma oxidation. Plasma Processes and Polymers. 2022;19(11). doi:10.1002/ppap.202200052","bibtex":"@article{Xie_de los Arcos de Pedro_Grundmeier_2022, title={Comparative analysis of hexamethyldisiloxane and hexamethyldisilazane plasma polymer thin films before and after plasma oxidation}, volume={19}, DOI={10.1002/ppap.202200052}, number={112200052}, journal={Plasma Processes and Polymers}, publisher={Wiley}, author={Xie, Xiaofan and de los Arcos de Pedro, Maria Teresa and Grundmeier, Guido}, year={2022} }"},"doi":"10.1002/ppap.202200052","language":[{"iso":"eng"}],"article_number":"2200052","intvolume":" 19","publication_status":"published","date_updated":"2023-01-24T08:48:44Z","author":[{"last_name":"Xie","first_name":"Xiaofan","full_name":"Xie, Xiaofan"},{"id":"54556","full_name":"de los Arcos de Pedro, Maria Teresa","first_name":"Maria Teresa","last_name":"de los Arcos de Pedro"},{"full_name":"Grundmeier, Guido","first_name":"Guido","last_name":"Grundmeier","id":"194"}],"publication_identifier":{"issn":["1612-8850","1612-8869"]},"title":"Comparative analysis of hexamethyldisiloxane and hexamethyldisilazane plasma polymer thin films before and after plasma oxidation","year":"2022","department":[{"_id":"302"}],"type":"journal_article","keyword":["Polymers and Plastics","Condensed Matter Physics"],"date_created":"2023-01-11T10:08:25Z","issue":"11","publication":"Plasma Processes and Polymers"},{"citation":{"mla":"Büngeler, Anne, et al. “Targeted Synthesis of the Type-A Particle Substructure from Enzymatically Produced Eumelanin.” Biomacromolecules, vol. 23, no. 3, American Chemical Society (ACS), 2022, pp. 1020–29, doi:10.1021/acs.biomac.1c01390.","bibtex":"@article{Büngeler_Kollmann_Huber_Strube_2022, title={Targeted Synthesis of the Type-A Particle Substructure from Enzymatically Produced Eumelanin}, volume={23}, DOI={10.1021/acs.biomac.1c01390}, number={3}, journal={Biomacromolecules}, publisher={American Chemical Society (ACS)}, author={Büngeler, Anne and Kollmann, Fabian and Huber, Klaus and Strube, Oliver I.}, year={2022}, pages={1020–1029} }","ama":"Büngeler A, Kollmann F, Huber K, Strube OI. Targeted Synthesis of the Type-A Particle Substructure from Enzymatically Produced Eumelanin. Biomacromolecules. 2022;23(3):1020-1029. doi:10.1021/acs.biomac.1c01390","ieee":"A. Büngeler, F. Kollmann, K. Huber, and O. I. Strube, “Targeted Synthesis of the Type-A Particle Substructure from Enzymatically Produced Eumelanin,” Biomacromolecules, vol. 23, no. 3, pp. 1020–1029, 2022, doi: 10.1021/acs.biomac.1c01390.","apa":"Büngeler, A., Kollmann, F., Huber, K., & Strube, O. I. (2022). Targeted Synthesis of the Type-A Particle Substructure from Enzymatically Produced Eumelanin. Biomacromolecules, 23(3), 1020–1029. https://doi.org/10.1021/acs.biomac.1c01390","short":"A. Büngeler, F. Kollmann, K. Huber, O.I. Strube, Biomacromolecules 23 (2022) 1020–1029.","chicago":"Büngeler, Anne, Fabian Kollmann, Klaus Huber, and Oliver I. Strube. “Targeted Synthesis of the Type-A Particle Substructure from Enzymatically Produced Eumelanin.” Biomacromolecules 23, no. 3 (2022): 1020–29. https://doi.org/10.1021/acs.biomac.1c01390."},"volume":23,"user_id":"237","publisher":"American Chemical Society (ACS)","_id":"41649","page":"1020-1029","status":"public","department":[{"_id":"314"}],"keyword":["Materials Chemistry","Polymers and Plastics","Biomaterials","Bioengineering"],"type":"journal_article","date_created":"2023-02-03T15:03:13Z","issue":"3","publication":"Biomacromolecules","doi":"10.1021/acs.biomac.1c01390","language":[{"iso":"eng"}],"intvolume":" 23","publication_status":"published","date_updated":"2023-02-06T12:06:49Z","publication_identifier":{"issn":["1525-7797","1526-4602"]},"author":[{"full_name":"Büngeler, Anne","first_name":"Anne","last_name":"Büngeler"},{"first_name":"Fabian","last_name":"Kollmann","full_name":"Kollmann, Fabian"},{"id":"237","full_name":"Huber, Klaus","last_name":"Huber","first_name":"Klaus"},{"full_name":"Strube, Oliver I.","last_name":"Strube","first_name":"Oliver I."}],"year":"2022","title":"Targeted Synthesis of the Type-A Particle Substructure from Enzymatically Produced Eumelanin"}]