--- _id: '59511' abstract: - lang: eng text: AbstractTo minimize or avoid the use of antibiotics, antimicrobial polymers have emerged as a promising option to fight biomaterial‐associated infections, e.g., on titanium‐based implants. However, the challenge is to develop active polymers that exhibit an antimicrobial effect and are compatible with human cells. Different studies aiming for biocidal polymers active in soluble mode, focused on the ratio of cationic to hydrophobic groups, while only marginal knowledge is available for immobilized components. Here a strong hydrophilic electrolyte 4‐vinylbenzyltrimethylammonium chloride (TMA) is chosen as the cationic component. The block composition of the polycationic segment is modified with styrene (Sty) regarding the amphiphilic balance. To adsorb such polymers onto titanium surfaces they are equipped with a polyphosphonic acid anchor block by sequential reversible‐addition‐fragmentation chain‐transfer polymerization (RAFT) polymerization. The polymer composition affected the wetting behavior of adsorbed coatings with water contact angles ranging from 17° to 72°, while zetapotential measurements confirmed high extent of positive charges for all adsorbed polymer coatings. The fundamentally modified block composition resulted in significantly improved cytocompatibility. Antimicrobial efficacy in early bacterial adhesion is still retained from slightly antiadhesive coatings to combined antiadhesive/biocidal activity depending on Sty/TMA ratio in random polymers while a block copolymer revealed lowest antimicrobial effect. author: - first_name: Cornelia full_name: Wolf‐Brandstetter, Cornelia last_name: Wolf‐Brandstetter - first_name: Rafael full_name: Methling, Rafael last_name: Methling - first_name: Dirk full_name: Kuckling, Dirk id: '287' last_name: Kuckling citation: ama: Wolf‐Brandstetter C, Methling R, Kuckling D. Adsorbable and Antimicrobial Amphiphilic Block Copolymers with Enhanced Biocompatibility. Macromolecular Materials and Engineering. Published online 2025. doi:10.1002/mame.202500078 apa: Wolf‐Brandstetter, C., Methling, R., & Kuckling, D. (2025). Adsorbable and Antimicrobial Amphiphilic Block Copolymers with Enhanced Biocompatibility. Macromolecular Materials and Engineering. https://doi.org/10.1002/mame.202500078 bibtex: '@article{Wolf‐Brandstetter_Methling_Kuckling_2025, title={Adsorbable and Antimicrobial Amphiphilic Block Copolymers with Enhanced Biocompatibility}, DOI={10.1002/mame.202500078}, journal={Macromolecular Materials and Engineering}, publisher={Wiley}, author={Wolf‐Brandstetter, Cornelia and Methling, Rafael and Kuckling, Dirk}, year={2025} }' chicago: Wolf‐Brandstetter, Cornelia, Rafael Methling, and Dirk Kuckling. “Adsorbable and Antimicrobial Amphiphilic Block Copolymers with Enhanced Biocompatibility.” Macromolecular Materials and Engineering, 2025. https://doi.org/10.1002/mame.202500078. ieee: 'C. Wolf‐Brandstetter, R. Methling, and D. Kuckling, “Adsorbable and Antimicrobial Amphiphilic Block Copolymers with Enhanced Biocompatibility,” Macromolecular Materials and Engineering, 2025, doi: 10.1002/mame.202500078.' mla: Wolf‐Brandstetter, Cornelia, et al. “Adsorbable and Antimicrobial Amphiphilic Block Copolymers with Enhanced Biocompatibility.” Macromolecular Materials and Engineering, Wiley, 2025, doi:10.1002/mame.202500078. short: C. Wolf‐Brandstetter, R. Methling, D. Kuckling, Macromolecular Materials and Engineering (2025). date_created: 2025-04-11T07:35:39Z date_updated: 2025-04-11T07:43:06Z department: - _id: '163' doi: 10.1002/mame.202500078 keyword: - antiadhesive surfaces - antimicrobial polymers - grafting to - polymerbrushes language: - iso: eng main_file_link: - url: https://onlinelibrary.wiley.com/doi/epdf/10.1002/mame.202500078 publication: Macromolecular Materials and Engineering publication_identifier: issn: - 1438-7492 - 1439-2054 publication_status: published publisher: Wiley status: public title: Adsorbable and Antimicrobial Amphiphilic Block Copolymers with Enhanced Biocompatibility type: journal_article user_id: '94' year: '2025' ... --- _id: '59995' abstract: - lang: eng text: "Abstract\r\n Ultrasonic transmission measurements can be used for material characterization, as the propagation time of sound waves and thus their velocity depends on the elastic material parameters. Measurement results for the elastic material parameters are acquired non-destructively using ultrasonic transmission measurements of hollow cylindrical polymer specimens. To determine the material parameters, an inverse approach is used comparing measurements with simulated data. Previous studies show that the procedure exhibits low sensitivity with respect to the shear parameters of the material. In order to increase the sensitivity, we propose to apply a spatially annular excitation on the base of the specimen. As a measure to analyse the sensitivities with respect to all parameters and their linear independence, we observe the volume of the parallelotope of the sensitivity vectors. Here, a scaled boundary finite element formulation of wave propagation in the specimen is expanded to yield derivative information directly, and a sensitivity analysis can be carried out efficiently. Finally, the results of this sensitivity analysis with regard to the annular excitation are also applied to the measurement setup." article_number: '6' article_type: original author: - first_name: Dmitrij full_name: Dreiling, Dmitrij id: '32616' last_name: Dreiling - first_name: Dominik full_name: Itner, Dominik last_name: Itner - first_name: Hauke full_name: Gravenkamp, Hauke last_name: Gravenkamp - first_name: Leander full_name: Claes, Leander id: '11829' last_name: Claes orcid: 0000-0002-4393-268X - first_name: Carolin full_name: Birk, Carolin last_name: Birk - first_name: Bernd full_name: Henning, Bernd id: '213' last_name: Henning citation: ama: Dreiling D, Itner D, Gravenkamp H, Claes L, Birk C, Henning B. Increasing the sensitivity of ultrasonic transmission measurements for elastic material parameter estimation. Measurement Science and Technology. 2025;36. doi:10.1088/1361-6501/add9b6 apa: Dreiling, D., Itner, D., Gravenkamp, H., Claes, L., Birk, C., & Henning, B. (2025). Increasing the sensitivity of ultrasonic transmission measurements for elastic material parameter estimation. Measurement Science and Technology, 36, Article 6. https://doi.org/10.1088/1361-6501/add9b6 bibtex: '@article{Dreiling_Itner_Gravenkamp_Claes_Birk_Henning_2025, title={Increasing the sensitivity of ultrasonic transmission measurements for elastic material parameter estimation}, volume={36}, DOI={10.1088/1361-6501/add9b6}, number={6}, journal={Measurement Science and Technology}, publisher={IOP Publishing}, author={Dreiling, Dmitrij and Itner, Dominik and Gravenkamp, Hauke and Claes, Leander and Birk, Carolin and Henning, Bernd}, year={2025} }' chicago: Dreiling, Dmitrij, Dominik Itner, Hauke Gravenkamp, Leander Claes, Carolin Birk, and Bernd Henning. “Increasing the Sensitivity of Ultrasonic Transmission Measurements for Elastic Material Parameter Estimation.” Measurement Science and Technology 36 (2025). https://doi.org/10.1088/1361-6501/add9b6. ieee: 'D. Dreiling, D. Itner, H. Gravenkamp, L. Claes, C. Birk, and B. Henning, “Increasing the sensitivity of ultrasonic transmission measurements for elastic material parameter estimation,” Measurement Science and Technology, vol. 36, Art. no. 6, 2025, doi: 10.1088/1361-6501/add9b6.' mla: Dreiling, Dmitrij, et al. “Increasing the Sensitivity of Ultrasonic Transmission Measurements for Elastic Material Parameter Estimation.” Measurement Science and Technology, vol. 36, 6, IOP Publishing, 2025, doi:10.1088/1361-6501/add9b6. short: D. Dreiling, D. Itner, H. Gravenkamp, L. Claes, C. Birk, B. Henning, Measurement Science and Technology 36 (2025). date_created: 2025-05-19T13:30:39Z date_updated: 2025-05-27T15:03:38Z department: - _id: '49' doi: 10.1088/1361-6501/add9b6 funded_apc: '1' intvolume: ' 36' keyword: - Sensitivity analysis - Ultrasonic transducer - Guided waves - Polymers - Gram determinant language: - iso: eng main_file_link: - open_access: '1' url: https://iopscience.iop.org/article/10.1088/1361-6501/add9b6 oa: '1' project: - _id: '89' grant_number: '409779252' name: 'VaMP: Vollständige Bestimmung der akustischen Materialparameter von Polymeren' publication: Measurement Science and Technology publication_identifier: issn: - 0957-0233 - 1361-6501 publication_status: published publisher: IOP Publishing quality_controlled: '1' status: public title: Increasing the sensitivity of ultrasonic transmission measurements for elastic material parameter estimation type: journal_article user_id: '32616' volume: 36 year: '2025' ... --- _id: '62302' abstract: - lang: eng text: The degree of crosslinking in unidirectional prepreg materials was investigated using differential scanning calorimetry to assess their curing behavior and thermal characteristics. To complement these measurements with a non-destructive, in-situ method, the propagation properties of guided acoustic waves in cured carbon fibre-reinforced epoxy plates were analysed. Correlations between the degree of crosslinking and acoustically determined mechanical properties were drawn to enable a future non-destructive evaluation approach. author: - first_name: Hayrettin full_name: Irmak, Hayrettin id: '75657' last_name: Irmak orcid: https://orcid.org/0009-0009-6267-2957 - first_name: Leander full_name: Claes, Leander id: '11829' last_name: Claes orcid: 0000-0002-4393-268X - first_name: Shuang full_name: Wu, Shuang id: '48039' last_name: Wu orcid: 0000-0001-8645-9952 - first_name: Thorsten full_name: Marten, Thorsten id: '338' last_name: Marten orcid: 0009-0001-6433-7839 - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster citation: ama: 'Irmak H, Claes L, Wu S, Marten T, Tröster T. Assessment of the influence of curing parameters on fibre reinforced epoxy composite properties using guided ultrasonic waves. In: 2025 International Congress on Ultrasonics. AMA Service GmbH; 2025:235–238. doi:10.5162/ultrasonic2025/c13-b3' apa: Irmak, H., Claes, L., Wu, S., Marten, T., & Tröster, T. (2025). Assessment of the influence of curing parameters on fibre reinforced epoxy composite properties using guided ultrasonic waves. 2025 International Congress on Ultrasonics, 235–238. https://doi.org/10.5162/ultrasonic2025/c13-b3 bibtex: '@inproceedings{Irmak_Claes_Wu_Marten_Tröster_2025, place={Paderborn}, title={Assessment of the influence of curing parameters on fibre reinforced epoxy composite properties using guided ultrasonic waves}, DOI={10.5162/ultrasonic2025/c13-b3}, booktitle={2025 International Congress on Ultrasonics}, publisher={AMA Service GmbH}, author={Irmak, Hayrettin and Claes, Leander and Wu, Shuang and Marten, Thorsten and Tröster, Thomas}, year={2025}, pages={235–238} }' chicago: 'Irmak, Hayrettin, Leander Claes, Shuang Wu, Thorsten Marten, and Thomas Tröster. “Assessment of the Influence of Curing Parameters on Fibre Reinforced Epoxy Composite Properties Using Guided Ultrasonic Waves.” In 2025 International Congress on Ultrasonics, 235–238. Paderborn: AMA Service GmbH, 2025. https://doi.org/10.5162/ultrasonic2025/c13-b3.' ieee: 'H. Irmak, L. Claes, S. Wu, T. Marten, and T. Tröster, “Assessment of the influence of curing parameters on fibre reinforced epoxy composite properties using guided ultrasonic waves,” in 2025 International Congress on Ultrasonics, Paderborn, Germany, 2025, pp. 235–238, doi: 10.5162/ultrasonic2025/c13-b3.' mla: Irmak, Hayrettin, et al. “Assessment of the Influence of Curing Parameters on Fibre Reinforced Epoxy Composite Properties Using Guided Ultrasonic Waves.” 2025 International Congress on Ultrasonics, AMA Service GmbH, 2025, pp. 235–238, doi:10.5162/ultrasonic2025/c13-b3. short: 'H. Irmak, L. Claes, S. Wu, T. Marten, T. Tröster, in: 2025 International Congress on Ultrasonics, AMA Service GmbH, Paderborn, 2025, pp. 235–238.' conference: end_date: 2025-09-25 location: Paderborn, Germany name: 2025 ICU PADERBORN - 9th International Congress on Ultrasonics start_date: 2025-09-21 date_created: 2025-11-25T12:23:07Z date_updated: 2026-03-23T10:31:53Z department: - _id: '49' - _id: '149' - _id: '321' doi: 10.5162/ultrasonic2025/c13-b3 keyword: - fibre-reinforced polymers - differential scanning calorimetry - degree of crosslinking - guided waves - ultrasound language: - iso: eng page: 235–238 place: Paderborn publication: 2025 International Congress on Ultrasonics publication_identifier: isbn: - 978-3-910600-08-9 publication_status: published publisher: AMA Service GmbH quality_controlled: '1' status: public title: Assessment of the influence of curing parameters on fibre reinforced epoxy composite properties using guided ultrasonic waves type: conference user_id: '338' year: '2025' ... --- _id: '53163' abstract: - lang: eng text: An SPR-based dually crosslinked gel sensor for adiponitrile bearing pillar[5]arene responsive sites with a low limit of detection was developed. article_type: original author: - first_name: Maksim full_name: Rodin, Maksim last_name: Rodin - first_name: David full_name: Helle, David last_name: Helle - first_name: Dirk full_name: Kuckling, Dirk id: '287' last_name: Kuckling citation: ama: Rodin M, Helle D, Kuckling D. Pillar[5]arene-based dually crosslinked supramolecular gel as a sensor for the detection of adiponitrile. Polymer Chemistry. 2024;15(7):661-679. doi:10.1039/d3py01354e apa: Rodin, M., Helle, D., & Kuckling, D. (2024). Pillar[5]arene-based dually crosslinked supramolecular gel as a sensor for the detection of adiponitrile. Polymer Chemistry, 15(7), 661–679. https://doi.org/10.1039/d3py01354e bibtex: '@article{Rodin_Helle_Kuckling_2024, title={Pillar[5]arene-based dually crosslinked supramolecular gel as a sensor for the detection of adiponitrile}, volume={15}, DOI={10.1039/d3py01354e}, number={7}, journal={Polymer Chemistry}, publisher={Royal Society of Chemistry (RSC)}, author={Rodin, Maksim and Helle, David and Kuckling, Dirk}, year={2024}, pages={661–679} }' chicago: 'Rodin, Maksim, David Helle, and Dirk Kuckling. “Pillar[5]Arene-Based Dually Crosslinked Supramolecular Gel as a Sensor for the Detection of Adiponitrile.” Polymer Chemistry 15, no. 7 (2024): 661–79. https://doi.org/10.1039/d3py01354e.' ieee: 'M. Rodin, D. Helle, and D. Kuckling, “Pillar[5]arene-based dually crosslinked supramolecular gel as a sensor for the detection of adiponitrile,” Polymer Chemistry, vol. 15, no. 7, pp. 661–679, 2024, doi: 10.1039/d3py01354e.' mla: Rodin, Maksim, et al. “Pillar[5]Arene-Based Dually Crosslinked Supramolecular Gel as a Sensor for the Detection of Adiponitrile.” Polymer Chemistry, vol. 15, no. 7, Royal Society of Chemistry (RSC), 2024, pp. 661–79, doi:10.1039/d3py01354e. short: M. Rodin, D. Helle, D. Kuckling, Polymer Chemistry 15 (2024) 661–679. date_created: 2024-04-03T10:57:17Z date_updated: 2024-04-03T11:03:03Z department: - _id: '163' doi: 10.1039/d3py01354e intvolume: ' 15' issue: '7' keyword: - Organic Chemistry - Polymers and Plastics - Biochemistry - Bioengineering language: - iso: eng page: 661-679 publication: Polymer Chemistry publication_identifier: issn: - 1759-9954 - 1759-9962 publication_status: published publisher: Royal Society of Chemistry (RSC) status: public title: Pillar[5]arene-based dually crosslinked supramolecular gel as a sensor for the detection of adiponitrile type: journal_article user_id: '94' volume: 15 year: '2024' ... --- _id: '59509' abstract: - lang: eng text: AbstractA strategy for multifunctional biosurfaces exploiting multiblock copolymers and the antipolyelectrolyte effect is reported. Combining a polyzwitterionic/antifouling and a polycationic/antibacterial block with a central anchoring block for attachment to titanium oxide surfaces affords surface coatings that exhibit antifouling properties against proteins and allow for surface regeneration by clearing adhering proteins by employing a salt washing step. The surfaces also kill bacteria by contact killing, which is aided by a nonfouling block. The synthesis of block copolymers of 4‐vinyl pyridine (VP), dimethyl 4‐vinylbenzyl phosphonate (DMVBP), and 4‐vinylbenzyltrimethyl ammonium chloride (TMA) is achieved on the multigram scale via RAFT polymerization with good end group retention and narrow dispersities. By polymer analogous reactions, poly(4‐vinyl pyridinium propane sulfonate‐block‐4‐vinylbenzyl phosphonic acid‐block‐4‐vinylbenzyl trimethylammonium chloride) (P(VSP64‐b‐PA14‐b‐TMA64)) is obtained. The antifouling properties against the model protein pepsin and the salt‐induced surface regeneration are shown in surface plasmon resonance (SPR) experiments, while independently the antibacterial and antifouling properties of coated titanium substrates are successfully tested in preliminary microbiological assays against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). This strategy may contribute to the development of long‐term effective antibacterial implant surface coatings to suppress biomedical device‐associated infections. author: - first_name: Rafael full_name: Methling, Rafael last_name: Methling - first_name: Michael full_name: Greiter, Michael last_name: Greiter - first_name: Jiwar full_name: Al‐Zawity, Jiwar last_name: Al‐Zawity - first_name: Mareike full_name: Müller, Mareike last_name: Müller - first_name: Holger full_name: Schönherr, Holger last_name: Schönherr - first_name: Dirk full_name: Kuckling, Dirk id: '287' last_name: Kuckling citation: ama: Methling R, Greiter M, Al‐Zawity J, Müller M, Schönherr H, Kuckling D. Salt‐Responsive Switchable Block Copolymer Brushes with Antibacterial and Antifouling Properties. Macromolecular Bioscience. 2024;25(1). doi:10.1002/mabi.202400261 apa: Methling, R., Greiter, M., Al‐Zawity, J., Müller, M., Schönherr, H., & Kuckling, D. (2024). Salt‐Responsive Switchable Block Copolymer Brushes with Antibacterial and Antifouling Properties. Macromolecular Bioscience, 25(1). https://doi.org/10.1002/mabi.202400261 bibtex: '@article{Methling_Greiter_Al‐Zawity_Müller_Schönherr_Kuckling_2024, title={Salt‐Responsive Switchable Block Copolymer Brushes with Antibacterial and Antifouling Properties}, volume={25}, DOI={10.1002/mabi.202400261}, number={1}, journal={Macromolecular Bioscience}, publisher={Wiley}, author={Methling, Rafael and Greiter, Michael and Al‐Zawity, Jiwar and Müller, Mareike and Schönherr, Holger and Kuckling, Dirk}, year={2024} }' chicago: Methling, Rafael, Michael Greiter, Jiwar Al‐Zawity, Mareike Müller, Holger Schönherr, and Dirk Kuckling. “Salt‐Responsive Switchable Block Copolymer Brushes with Antibacterial and Antifouling Properties.” Macromolecular Bioscience 25, no. 1 (2024). https://doi.org/10.1002/mabi.202400261. ieee: 'R. Methling, M. Greiter, J. Al‐Zawity, M. Müller, H. Schönherr, and D. Kuckling, “Salt‐Responsive Switchable Block Copolymer Brushes with Antibacterial and Antifouling Properties,” Macromolecular Bioscience, vol. 25, no. 1, 2024, doi: 10.1002/mabi.202400261.' mla: Methling, Rafael, et al. “Salt‐Responsive Switchable Block Copolymer Brushes with Antibacterial and Antifouling Properties.” Macromolecular Bioscience, vol. 25, no. 1, Wiley, 2024, doi:10.1002/mabi.202400261. short: R. Methling, M. Greiter, J. Al‐Zawity, M. Müller, H. Schönherr, D. Kuckling, Macromolecular Bioscience 25 (2024). date_created: 2025-04-11T07:07:31Z date_updated: 2025-04-11T07:09:03Z department: - _id: '163' doi: 10.1002/mabi.202400261 intvolume: ' 25' issue: '1' keyword: - antibacterial coatings - antipolyelectrolyte effect - salt switchable polymers - zwitterionic brushes language: - iso: eng main_file_link: - url: https://onlinelibrary.wiley.com/doi/10.1002/mabi.202400261 publication: Macromolecular Bioscience publication_identifier: issn: - 1616-5187 - 1616-5195 publication_status: published publisher: Wiley status: public title: Salt‐Responsive Switchable Block Copolymer Brushes with Antibacterial and Antifouling Properties type: journal_article user_id: '94' volume: 25 year: '2024' ... --- _id: '59132' author: - first_name: Elmar full_name: Moritzer, Elmar id: '20531' last_name: Moritzer - first_name: Jonas full_name: Beutelspacher, Jonas id: '92911' last_name: Beutelspacher - first_name: Christian Lennart full_name: Elsner, Christian Lennart id: '70729' last_name: Elsner citation: ama: Moritzer E, Beutelspacher J, Elsner CL. Investigation of the weld seam quality of particle filled polymers in the fused filament fabrication process. Polymer Composites. Published online 2024. doi:10.1002/pc.29101 apa: Moritzer, E., Beutelspacher, J., & Elsner, C. L. (2024). Investigation of the weld seam quality of particle filled polymers in the fused filament fabrication process. Polymer Composites. https://doi.org/10.1002/pc.29101 bibtex: '@article{Moritzer_Beutelspacher_Elsner_2024, title={Investigation of the weld seam quality of particle filled polymers in the fused filament fabrication process}, DOI={10.1002/pc.29101}, journal={Polymer Composites}, author={Moritzer, Elmar and Beutelspacher, Jonas and Elsner, Christian Lennart}, year={2024} }' chicago: Moritzer, Elmar, Jonas Beutelspacher, and Christian Lennart Elsner. “Investigation of the Weld Seam Quality of Particle Filled Polymers in the Fused Filament Fabrication Process.” Polymer Composites, 2024. https://doi.org/10.1002/pc.29101. ieee: 'E. Moritzer, J. Beutelspacher, and C. L. Elsner, “Investigation of the weld seam quality of particle filled polymers in the fused filament fabrication process,” Polymer Composites, 2024, doi: 10.1002/pc.29101.' mla: Moritzer, Elmar, et al. “Investigation of the Weld Seam Quality of Particle Filled Polymers in the Fused Filament Fabrication Process.” Polymer Composites, 2024, doi:10.1002/pc.29101. short: E. Moritzer, J. Beutelspacher, C.L. Elsner, Polymer Composites (2024). date_created: 2025-03-25T10:18:06Z date_updated: 2025-03-27T10:55:25Z department: - _id: '9' - _id: '321' - _id: '624' - _id: '367' doi: 10.1002/pc.29101 keyword: - Filled polymers - Fused Filament Fabrication - weld seam quality - weld seam strength language: - iso: eng publication: Polymer Composites quality_controlled: '1' status: public title: Investigation of the weld seam quality of particle filled polymers in the fused filament fabrication process type: journal_article user_id: '59363' year: '2024' ... --- _id: '48277' abstract: - lang: eng text: AbstractCurrently, the fused deposition modeling (FDM) process is the most common additive manufacturing technology. The principle of the FDM process is the strand wise deposition of molten thermoplastic polymers, by feeding a filament trough a heated nozzle. Due to the strand and layer wise deposition the cooling of the manufactured component is not uniform. This leads to dimensional deviations which may cause the component to be unusable for the desired application. In this paper, a method is described which is based on the shrinkage compensation through the adaption of every single raster line in components manufactured with the FDM process. The shrinkage compensation is based on a model resulting from a DOE which considers the main influencing factors on the shrinkage behavior of raster lines in the FDM process. An in‐house developed software analyzes the component and locally applies the shrinkage compensation with consideration of the boundary conditions, e.g., the position of the raster line in the component and the process parameters. Following, a validation using a simple geometry is conducted to show the effect of the presented adaptive scaling method. author: - first_name: Elmar full_name: Moritzer, Elmar id: '20531' last_name: Moritzer - first_name: Felix full_name: Hecker, Felix id: '45537' last_name: Hecker citation: ama: Moritzer E, Hecker F. Adaptive Scaling of Components in the Fused Deposition Modeling Process. Macromolecular Symposia. 2023;411(1). doi:10.1002/masy.202200181 apa: Moritzer, E., & Hecker, F. (2023). Adaptive Scaling of Components in the Fused Deposition Modeling Process. Macromolecular Symposia, 411(1). https://doi.org/10.1002/masy.202200181 bibtex: '@article{Moritzer_Hecker_2023, title={Adaptive Scaling of Components in the Fused Deposition Modeling Process}, volume={411}, DOI={10.1002/masy.202200181}, number={1}, journal={Macromolecular Symposia}, publisher={Wiley}, author={Moritzer, Elmar and Hecker, Felix}, year={2023} }' chicago: Moritzer, Elmar, and Felix Hecker. “Adaptive Scaling of Components in the Fused Deposition Modeling Process.” Macromolecular Symposia 411, no. 1 (2023). https://doi.org/10.1002/masy.202200181. ieee: 'E. Moritzer and F. Hecker, “Adaptive Scaling of Components in the Fused Deposition Modeling Process,” Macromolecular Symposia, vol. 411, no. 1, 2023, doi: 10.1002/masy.202200181.' mla: Moritzer, Elmar, and Felix Hecker. “Adaptive Scaling of Components in the Fused Deposition Modeling Process.” Macromolecular Symposia, vol. 411, no. 1, Wiley, 2023, doi:10.1002/masy.202200181. short: E. Moritzer, F. Hecker, Macromolecular Symposia 411 (2023). conference: end_date: 2022-11-26 location: Bukarest name: POLCOM 2022 start_date: 2022-11-13 date_created: 2023-10-19T07:25:06Z date_updated: 2024-02-23T08:36:42Z department: - _id: '9' - _id: '367' - _id: '321' - _id: '219' - _id: '624' doi: 10.1002/masy.202200181 intvolume: ' 411' issue: '1' keyword: - Materials Chemistry - Polymers and Plastics - Organic Chemistry - Condensed Matter Physics language: - iso: eng main_file_link: - open_access: '1' url: https://doi.org/10.1002/masy.202200181 oa: '1' publication: Macromolecular Symposia publication_identifier: issn: - 1022-1360 - 1521-3900 publication_status: published publisher: Wiley quality_controlled: '1' status: public title: Adaptive Scaling of Components in the Fused Deposition Modeling Process type: journal_article user_id: '45537' volume: 411 year: '2023' ... --- _id: '52802' abstract: - lang: eng text: AbstractCurrently, the fused deposition modeling (FDM) process is the most common additive manufacturing technology. The principle of the FDM process is the strand wise deposition of molten thermoplastic polymers, by feeding a filament trough a heated nozzle. Due to the strand and layer wise deposition the cooling of the manufactured component is not uniform. This leads to dimensional deviations which may cause the component to be unusable for the desired application. In this paper, a method is described which is based on the shrinkage compensation through the adaption of every single raster line in components manufactured with the FDM process. The shrinkage compensation is based on a model resulting from a DOE which considers the main influencing factors on the shrinkage behavior of raster lines in the FDM process. An in‐house developed software analyzes the component and locally applies the shrinkage compensation with consideration of the boundary conditions, e.g., the position of the raster line in the component and the process parameters. Following, a validation using a simple geometry is conducted to show the effect of the presented adaptive scaling method. author: - first_name: Elmar full_name: Moritzer, Elmar id: '20531' last_name: Moritzer - first_name: Felix full_name: Hecker, Felix id: '45537' last_name: Hecker citation: ama: Moritzer E, Hecker F. Adaptive Scaling of Components in the Fused Deposition Modeling Process. Macromolecular Symposia. 2023;411(1). doi:10.1002/masy.202200181 apa: Moritzer, E., & Hecker, F. (2023). Adaptive Scaling of Components in the Fused Deposition Modeling Process. Macromolecular Symposia, 411(1). https://doi.org/10.1002/masy.202200181 bibtex: '@article{Moritzer_Hecker_2023, title={Adaptive Scaling of Components in the Fused Deposition Modeling Process}, volume={411}, DOI={10.1002/masy.202200181}, number={1}, journal={Macromolecular Symposia}, publisher={Wiley}, author={Moritzer, Elmar and Hecker, Felix}, year={2023} }' chicago: Moritzer, Elmar, and Felix Hecker. “Adaptive Scaling of Components in the Fused Deposition Modeling Process.” Macromolecular Symposia 411, no. 1 (2023). https://doi.org/10.1002/masy.202200181. ieee: 'E. Moritzer and F. Hecker, “Adaptive Scaling of Components in the Fused Deposition Modeling Process,” Macromolecular Symposia, vol. 411, no. 1, 2023, doi: 10.1002/masy.202200181.' mla: Moritzer, Elmar, and Felix Hecker. “Adaptive Scaling of Components in the Fused Deposition Modeling Process.” Macromolecular Symposia, vol. 411, no. 1, Wiley, 2023, doi:10.1002/masy.202200181. short: E. Moritzer, F. Hecker, Macromolecular Symposia 411 (2023). date_created: 2024-03-25T09:16:46Z date_updated: 2024-03-25T09:17:03Z department: - _id: '9' - _id: '367' - _id: '321' doi: 10.1002/masy.202200181 intvolume: ' 411' issue: '1' keyword: - Materials Chemistry - Polymers and Plastics - Organic Chemistry - Condensed Matter Physics language: - iso: eng publication: Macromolecular Symposia publication_identifier: issn: - 1022-1360 - 1521-3900 publication_status: published publisher: Wiley quality_controlled: '1' status: public title: Adaptive Scaling of Components in the Fused Deposition Modeling Process type: journal_article user_id: '44116' volume: 411 year: '2023' ... --- _id: '53170' abstract: - lang: eng text: AbstractCoating medical implants with antibacterial polymers may prevent postoperative infections which are a common issue for conventional titanium implants and can even lead to implant failure. Easily applicable diblock copolymers are presented that form polymer brushes via “grafting to” mechanism on titanium and equip the modified material with antibacterial properties. The polymers carry quaternized pyridinium units to combat bacteria and phosphonic acid groups which allow the linear chains to be anchored to metal surfaces in a convenient coating process. The polymers are synthesized via reversible‐addition‐fragmentation‐chain‐transfer (RAFT) polymerization and postmodifications and are characterized using NMR spectroscopy and SEC. Low grafting densities are a major drawback of the “grafting to” approach compared to “grafting from”. Thus, the number of phosphonic acid groups in the anchor block are varied to investigate and optimize the surface binding. Modified titanium surfaces are examined regarding their composition, wetting behavior, streaming potential, and coating stability. Evaluation of the antimicrobial properties revealed reduced bacterial adhesion and biofilm formation for certain polymers, albeit the cell biocompatibility against human gingival fibroblasts is also impaired. The presented findings show the potential of easy‐to‐apply polymer coatings and aid in designing next‐generation implant surface modifications. article_type: original author: - first_name: Rafael full_name: Methling, Rafael last_name: Methling - first_name: Oliver full_name: Dückmann, Oliver last_name: Dückmann - first_name: Frank full_name: Simon, Frank last_name: Simon - first_name: Cornelia full_name: Wolf‐Brandstetter, Cornelia last_name: Wolf‐Brandstetter - first_name: Dirk full_name: Kuckling, Dirk id: '287' last_name: Kuckling citation: ama: Methling R, Dückmann O, Simon F, Wolf‐Brandstetter C, Kuckling D. Antimicrobial Brushes on Titanium via “Grafting to” Using Phosphonic Acid/Pyridinium Containing Block Copolymers. Macromolecular Materials and Engineering. 2023;308(8). doi:10.1002/mame.202200665 apa: Methling, R., Dückmann, O., Simon, F., Wolf‐Brandstetter, C., & Kuckling, D. (2023). Antimicrobial Brushes on Titanium via “Grafting to” Using Phosphonic Acid/Pyridinium Containing Block Copolymers. Macromolecular Materials and Engineering, 308(8). https://doi.org/10.1002/mame.202200665 bibtex: '@article{Methling_Dückmann_Simon_Wolf‐Brandstetter_Kuckling_2023, title={Antimicrobial Brushes on Titanium via “Grafting to” Using Phosphonic Acid/Pyridinium Containing Block Copolymers}, volume={308}, DOI={10.1002/mame.202200665}, number={8}, journal={Macromolecular Materials and Engineering}, publisher={Wiley}, author={Methling, Rafael and Dückmann, Oliver and Simon, Frank and Wolf‐Brandstetter, Cornelia and Kuckling, Dirk}, year={2023} }' chicago: Methling, Rafael, Oliver Dückmann, Frank Simon, Cornelia Wolf‐Brandstetter, and Dirk Kuckling. “Antimicrobial Brushes on Titanium via ‘Grafting to’ Using Phosphonic Acid/Pyridinium Containing Block Copolymers.” Macromolecular Materials and Engineering 308, no. 8 (2023). https://doi.org/10.1002/mame.202200665. ieee: 'R. Methling, O. Dückmann, F. Simon, C. Wolf‐Brandstetter, and D. Kuckling, “Antimicrobial Brushes on Titanium via ‘Grafting to’ Using Phosphonic Acid/Pyridinium Containing Block Copolymers,” Macromolecular Materials and Engineering, vol. 308, no. 8, 2023, doi: 10.1002/mame.202200665.' mla: Methling, Rafael, et al. “Antimicrobial Brushes on Titanium via ‘Grafting to’ Using Phosphonic Acid/Pyridinium Containing Block Copolymers.” Macromolecular Materials and Engineering, vol. 308, no. 8, Wiley, 2023, doi:10.1002/mame.202200665. short: R. Methling, O. Dückmann, F. Simon, C. Wolf‐Brandstetter, D. Kuckling, Macromolecular Materials and Engineering 308 (2023). date_created: 2024-04-03T11:08:51Z date_updated: 2024-04-03T11:10:05Z department: - _id: '163' doi: 10.1002/mame.202200665 intvolume: ' 308' issue: '8' keyword: - Materials Chemistry - Polymers and Plastics - Organic Chemistry - General Chemical Engineering language: - iso: eng publication: Macromolecular Materials and Engineering publication_identifier: issn: - 1438-7492 - 1439-2054 publication_status: published publisher: Wiley status: public title: Antimicrobial Brushes on Titanium via “Grafting to” Using Phosphonic Acid/Pyridinium Containing Block Copolymers type: journal_article user_id: '94' volume: 308 year: '2023' ... --- _id: '42165' abstract: - lang: eng text: AbstractComposite materials, such as fiber reinforced polymers, become increasingly important due to their excellent mechanical and lightweight properties. In this respect, this paper reports the characterization of a unidirectional carbon fiber reinforced polymer composite material. Particularly, the mechanical behavior of the overall composite and of the individual constituents of the composite is investigated. To this end, tensile and shear tests are performed for the composite. As a result, statistics for five transversely isotropic material parameters can be established for the composite. For the description of the mechanical properties of the constituents, tensile tests for the carbon fiber as well as for the polymer matrix are carried out. In addition, the volume fraction of fibers in the matrix is determined experimentally using an ashing technique and Archimedes’ principle. For the Young’s modulus of the fiber, the Young’s modulus and transverse contraction of the matrix, as well as the volume fraction of the constituents, statistics can be concluded. The resulting mechanical properties on both scales are useful for the application and validation of different material models and homogenization methods. Finally, in order to validate the obtained properties in the future, inhomogeneous tests were performed, once a flat plate with a hole and a flat plate with semicircular notches. author: - first_name: Eduard full_name: Penner, Eduard last_name: Penner - first_name: Ismail full_name: Caylak, Ismail id: '75' last_name: Caylak - first_name: Rolf full_name: Mahnken, Rolf id: '335' last_name: Mahnken citation: ama: Penner E, Caylak I, Mahnken R. Experimental Investigations of Carbon Fiber Reinforced Polymer Composites and Their Constituents to Determine Their Elastic Material Properties and Complementary Inhomogeneous Experiments with Local Strain Considerations. Fibers and Polymers. Published online 2023. doi:10.1007/s12221-023-00122-x apa: Penner, E., Caylak, I., & Mahnken, R. (2023). Experimental Investigations of Carbon Fiber Reinforced Polymer Composites and Their Constituents to Determine Their Elastic Material Properties and Complementary Inhomogeneous Experiments with Local Strain Considerations. Fibers and Polymers. https://doi.org/10.1007/s12221-023-00122-x bibtex: '@article{Penner_Caylak_Mahnken_2023, title={Experimental Investigations of Carbon Fiber Reinforced Polymer Composites and Their Constituents to Determine Their Elastic Material Properties and Complementary Inhomogeneous Experiments with Local Strain Considerations}, DOI={10.1007/s12221-023-00122-x}, journal={Fibers and Polymers}, publisher={Springer Science and Business Media LLC}, author={Penner, Eduard and Caylak, Ismail and Mahnken, Rolf}, year={2023} }' chicago: Penner, Eduard, Ismail Caylak, and Rolf Mahnken. “Experimental Investigations of Carbon Fiber Reinforced Polymer Composites and Their Constituents to Determine Their Elastic Material Properties and Complementary Inhomogeneous Experiments with Local Strain Considerations.” Fibers and Polymers, 2023. https://doi.org/10.1007/s12221-023-00122-x. ieee: 'E. Penner, I. Caylak, and R. Mahnken, “Experimental Investigations of Carbon Fiber Reinforced Polymer Composites and Their Constituents to Determine Their Elastic Material Properties and Complementary Inhomogeneous Experiments with Local Strain Considerations,” Fibers and Polymers, 2023, doi: 10.1007/s12221-023-00122-x.' mla: Penner, Eduard, et al. “Experimental Investigations of Carbon Fiber Reinforced Polymer Composites and Their Constituents to Determine Their Elastic Material Properties and Complementary Inhomogeneous Experiments with Local Strain Considerations.” Fibers and Polymers, Springer Science and Business Media LLC, 2023, doi:10.1007/s12221-023-00122-x. short: E. Penner, I. Caylak, R. Mahnken, Fibers and Polymers (2023). date_created: 2023-02-16T12:37:11Z date_updated: 2023-03-24T08:42:33Z department: - _id: '9' - _id: '154' - _id: '321' doi: 10.1007/s12221-023-00122-x keyword: - Polymers and Plastics - General Chemical Engineering - General Chemistry language: - iso: eng publication: Fibers and Polymers publication_identifier: issn: - 1229-9197 - 1875-0052 publication_status: published publisher: Springer Science and Business Media LLC status: public title: Experimental Investigations of Carbon Fiber Reinforced Polymer Composites and Their Constituents to Determine Their Elastic Material Properties and Complementary Inhomogeneous Experiments with Local Strain Considerations type: journal_article user_id: '335' year: '2023' ... --- _id: '42953' author: - first_name: Eleonora full_name: Cara, Eleonora last_name: Cara - first_name: Philipp full_name: Hönicke, Philipp last_name: Hönicke - first_name: Yves full_name: Kayser, Yves last_name: Kayser - first_name: Jörg K. N. full_name: Lindner, Jörg K. N. id: '20797' last_name: Lindner - first_name: Micaela full_name: Castellino, Micaela last_name: Castellino - first_name: Irdi full_name: Murataj, Irdi last_name: Murataj - first_name: Samuele full_name: Porro, Samuele last_name: Porro - first_name: Angelo full_name: Angelini, Angelo last_name: Angelini - first_name: Natascia full_name: De Leo, Natascia last_name: De Leo - first_name: Candido Fabrizio full_name: Pirri, Candido Fabrizio last_name: Pirri - first_name: Burkhard full_name: Beckhoff, Burkhard last_name: Beckhoff - first_name: Luca full_name: Boarino, Luca last_name: Boarino - first_name: Federico full_name: Ferrarese Lupi, Federico last_name: Ferrarese Lupi citation: ama: 'Cara E, Hönicke P, Kayser Y, et al. Developing Quantitative Nondestructive Characterization of Nanomaterials: A Case Study on Sequential Infiltration Synthesis of Block Copolymers. ACS Applied Polymer Materials. 2023;5(3):2079-2087. doi:10.1021/acsapm.2c02094' apa: 'Cara, E., Hönicke, P., Kayser, Y., Lindner, J. K. N., Castellino, M., Murataj, I., Porro, S., Angelini, A., De Leo, N., Pirri, C. F., Beckhoff, B., Boarino, L., & Ferrarese Lupi, F. (2023). Developing Quantitative Nondestructive Characterization of Nanomaterials: A Case Study on Sequential Infiltration Synthesis of Block Copolymers. ACS Applied Polymer Materials, 5(3), 2079–2087. https://doi.org/10.1021/acsapm.2c02094' bibtex: '@article{Cara_Hönicke_Kayser_Lindner_Castellino_Murataj_Porro_Angelini_De Leo_Pirri_et al._2023, title={Developing Quantitative Nondestructive Characterization of Nanomaterials: A Case Study on Sequential Infiltration Synthesis of Block Copolymers}, volume={5}, DOI={10.1021/acsapm.2c02094}, number={3}, journal={ACS Applied Polymer Materials}, publisher={American Chemical Society (ACS)}, author={Cara, Eleonora and Hönicke, Philipp and Kayser, Yves and Lindner, Jörg K. N. and Castellino, Micaela and Murataj, Irdi and Porro, Samuele and Angelini, Angelo and De Leo, Natascia and Pirri, Candido Fabrizio and et al.}, year={2023}, pages={2079–2087} }' chicago: 'Cara, Eleonora, Philipp Hönicke, Yves Kayser, Jörg K. N. Lindner, Micaela Castellino, Irdi Murataj, Samuele Porro, et al. “Developing Quantitative Nondestructive Characterization of Nanomaterials: A Case Study on Sequential Infiltration Synthesis of Block Copolymers.” ACS Applied Polymer Materials 5, no. 3 (2023): 2079–87. https://doi.org/10.1021/acsapm.2c02094.' ieee: 'E. Cara et al., “Developing Quantitative Nondestructive Characterization of Nanomaterials: A Case Study on Sequential Infiltration Synthesis of Block Copolymers,” ACS Applied Polymer Materials, vol. 5, no. 3, pp. 2079–2087, 2023, doi: 10.1021/acsapm.2c02094.' mla: 'Cara, Eleonora, et al. “Developing Quantitative Nondestructive Characterization of Nanomaterials: A Case Study on Sequential Infiltration Synthesis of Block Copolymers.” ACS Applied Polymer Materials, vol. 5, no. 3, American Chemical Society (ACS), 2023, pp. 2079–87, doi:10.1021/acsapm.2c02094.' short: E. Cara, P. Hönicke, Y. Kayser, J.K.N. Lindner, M. Castellino, I. Murataj, S. Porro, A. Angelini, N. De Leo, C.F. Pirri, B. Beckhoff, L. Boarino, F. Ferrarese Lupi, ACS Applied Polymer Materials 5 (2023) 2079–2087. date_created: 2023-03-13T12:37:25Z date_updated: 2023-03-13T12:39:28Z department: - _id: '15' doi: 10.1021/acsapm.2c02094 intvolume: ' 5' issue: '3' keyword: - Organic Chemistry - Polymers and Plastics - Process Chemistry and Technology language: - iso: eng page: 2079-2087 publication: ACS Applied Polymer Materials publication_identifier: issn: - 2637-6105 - 2637-6105 publication_status: published publisher: American Chemical Society (ACS) status: public title: 'Developing Quantitative Nondestructive Characterization of Nanomaterials: A Case Study on Sequential Infiltration Synthesis of Block Copolymers' type: journal_article user_id: '77496' volume: 5 year: '2023' ... --- _id: '42515' abstract: - lang: eng text: Microcellular wood fiber reinforced polymers offer the possibility to reduce the use of fossil raw materials. In particular, thick-walled structures with thicknesses greater than 6 mm offer a high potential for weight savings. This study investigates the cell structures and mechanical properties of injection-molded test specimens. The influence of different thicknesses (6–10 mm) along with different chemical blowing agents (endothermic, exothermic) with varying dosages (0–2 wt%) is analyzed. The investigations reveal that exothermic chemical blowing agents form finer cells consistently to thin-walled structures than endothermic ones. Higher foaming agent content leads to higher pore fractions, with many small cells coalescing into a large open-pore cell network. The mechanical properties depend mainly on the pore content of the sample. The specific tensile properties deteriorate with the use of chemical blowing agents (CFA), whereas the sandwich structure produced with compact edge layers has a positive influence on the specific flexural properties. author: - first_name: Elmar full_name: Moritzer, Elmar id: '20531' last_name: Moritzer - first_name: Felix full_name: Flachmann, Felix id: '38212' last_name: Flachmann orcid: 0000-0002-7651-7028 citation: ama: Moritzer E, Flachmann F. Morphological and mechanical properties of foamed thick-walled Wood-Plastic-Composite structures. Journal of Cellular Plastics. 2023;59(3):187-199. doi:10.1177/0021955x231161175 apa: Moritzer, E., & Flachmann, F. (2023). Morphological and mechanical properties of foamed thick-walled Wood-Plastic-Composite structures. Journal of Cellular Plastics, 59(3), 187–199. https://doi.org/10.1177/0021955x231161175 bibtex: '@article{Moritzer_Flachmann_2023, title={Morphological and mechanical properties of foamed thick-walled Wood-Plastic-Composite structures}, volume={59}, DOI={10.1177/0021955x231161175}, number={3}, journal={Journal of Cellular Plastics}, publisher={SAGE Publications}, author={Moritzer, Elmar and Flachmann, Felix}, year={2023}, pages={187–199} }' chicago: 'Moritzer, Elmar, and Felix Flachmann. “Morphological and Mechanical Properties of Foamed Thick-Walled Wood-Plastic-Composite Structures.” Journal of Cellular Plastics 59, no. 3 (2023): 187–99. https://doi.org/10.1177/0021955x231161175.' ieee: 'E. Moritzer and F. Flachmann, “Morphological and mechanical properties of foamed thick-walled Wood-Plastic-Composite structures,” Journal of Cellular Plastics, vol. 59, no. 3, pp. 187–199, 2023, doi: 10.1177/0021955x231161175.' mla: Moritzer, Elmar, and Felix Flachmann. “Morphological and Mechanical Properties of Foamed Thick-Walled Wood-Plastic-Composite Structures.” Journal of Cellular Plastics, vol. 59, no. 3, SAGE Publications, 2023, pp. 187–99, doi:10.1177/0021955x231161175. short: E. Moritzer, F. Flachmann, Journal of Cellular Plastics 59 (2023) 187–199. date_created: 2023-02-27T07:11:52Z date_updated: 2023-04-26T13:40:19Z department: - _id: '321' - _id: '9' - _id: '367' - _id: '147' doi: 10.1177/0021955x231161175 intvolume: ' 59' issue: '3' keyword: - Materials Chemistry - Polymers and Plastics - General Chemistry language: - iso: eng main_file_link: - open_access: '1' oa: '1' page: 187-199 publication: Journal of Cellular Plastics publication_identifier: issn: - 0021-955X - 1530-7999 publication_status: published publisher: SAGE Publications quality_controlled: '1' status: public title: Morphological and mechanical properties of foamed thick-walled Wood-Plastic-Composite structures type: journal_article user_id: '38212' volume: 59 year: '2023' ... --- _id: '30915' author: - first_name: Nick full_name: Chudalla, Nick id: '41235' last_name: Chudalla - first_name: Gerson full_name: Meschut, Gerson id: '32056' last_name: Meschut orcid: 0000-0002-2763-1246 - first_name: Aurélie full_name: Bartley, Aurélie last_name: Bartley - first_name: Tim Michael full_name: Wibbeke, Tim Michael last_name: Wibbeke citation: ama: Chudalla N, Meschut G, Bartley A, Wibbeke TM. Bauteilschonendes  Entfügen struktureller Klebverbindungen  durch Kälte. adhäsion KLEBEN & DICHTEN. 2022;66(4):34-37. doi:10.1007/s35145-022-0576-0 apa: Chudalla, N., Meschut, G., Bartley, A., & Wibbeke, T. M. (2022). Bauteilschonendes  Entfügen struktureller Klebverbindungen  durch Kälte. adhäsion KLEBEN & DICHTEN, 66(4), 34–37. https://doi.org/10.1007/s35145-022-0576-0 bibtex: '@article{Chudalla_Meschut_Bartley_Wibbeke_2022, title={Bauteilschonendes  Entfügen struktureller Klebverbindungen  durch Kälte}, volume={66}, DOI={10.1007/s35145-022-0576-0}, number={4}, journal={adhäsion KLEBEN & DICHTEN}, publisher={Springer Science and Business Media LLC}, author={Chudalla, Nick and Meschut, Gerson and Bartley, Aurélie and Wibbeke, Tim Michael}, year={2022}, pages={34–37} }' chicago: 'Chudalla, Nick, Gerson Meschut, Aurélie Bartley, and Tim Michael Wibbeke. “Bauteilschonendes  Entfügen struktureller Klebverbindungen  durch Kälte.” adhäsion KLEBEN & DICHTEN 66, no. 4 (2022): 34–37. https://doi.org/10.1007/s35145-022-0576-0.' ieee: 'N. Chudalla, G. Meschut, A. Bartley, and T. M. Wibbeke, “Bauteilschonendes  Entfügen struktureller Klebverbindungen  durch Kälte,” adhäsion KLEBEN & DICHTEN, vol. 66, no. 4, pp. 34–37, 2022, doi: 10.1007/s35145-022-0576-0.' mla: Chudalla, Nick, et al. “Bauteilschonendes  Entfügen struktureller Klebverbindungen  durch Kälte.” adhäsion KLEBEN & DICHTEN, vol. 66, no. 4, Springer Science and Business Media LLC, 2022, pp. 34–37, doi:10.1007/s35145-022-0576-0. short: N. Chudalla, G. Meschut, A. Bartley, T.M. Wibbeke, adhäsion KLEBEN & DICHTEN 66 (2022) 34–37. date_created: 2022-04-19T12:02:58Z date_updated: 2022-05-03T06:57:23Z department: - _id: '157' doi: 10.1007/s35145-022-0576-0 intvolume: ' 66' issue: '4' keyword: - Polymers and Plastics - General Chemical Engineering - General Chemistry language: - iso: ger page: 34-37 publication: adhäsion KLEBEN & DICHTEN publication_identifier: issn: - 1619-1919 - 2192-8681 publication_status: published publisher: Springer Science and Business Media LLC status: public title: Bauteilschonendes Entfügen struktureller Klebverbindungen durch Kälte type: journal_article user_id: '41235' volume: 66 year: '2022' ... --- _id: '34648' article_number: '2100174' author: - first_name: Christian full_name: Hoppe, Christian id: '27401' last_name: Hoppe - first_name: Felix full_name: Mitschker, Felix last_name: Mitschker - first_name: Lukas full_name: Mai, Lukas last_name: Mai - first_name: Maciej Oskar full_name: Liedke, Maciej Oskar last_name: Liedke - first_name: Teresa full_name: Arcos, Teresa last_name: Arcos - first_name: Peter full_name: Awakowicz, Peter last_name: Awakowicz - first_name: Anjana full_name: Devi, Anjana last_name: Devi - first_name: Ahmed Gamal full_name: Attallah, Ahmed Gamal last_name: Attallah - first_name: Maik full_name: Butterling, Maik last_name: Butterling - first_name: Andreas full_name: Wagner, Andreas last_name: Wagner - first_name: Guido full_name: Grundmeier, Guido id: '194' last_name: Grundmeier citation: ama: Hoppe C, Mitschker F, Mai L, et al. Influence of surface activation on the microporosity of PE‐CVD and PE‐ALD SiO                          x                        thin films on PDMS. Plasma Processes and Polymers. 2022;19(4). doi:10.1002/ppap.202100174 apa: Hoppe, C., Mitschker, F., Mai, L., Liedke, M. O., Arcos, T., Awakowicz, P., Devi, A., Attallah, A. G., Butterling, M., Wagner, A., & Grundmeier, G. (2022). Influence of surface activation on the microporosity of PE‐CVD and PE‐ALD SiO                          x                        thin films on PDMS. Plasma Processes and Polymers, 19(4), Article 2100174. https://doi.org/10.1002/ppap.202100174 bibtex: '@article{Hoppe_Mitschker_Mai_Liedke_Arcos_Awakowicz_Devi_Attallah_Butterling_Wagner_et al._2022, title={Influence of surface activation on the microporosity of PE‐CVD and PE‐ALD SiO                          x                        thin films on PDMS}, volume={19}, DOI={10.1002/ppap.202100174}, number={42100174}, journal={Plasma Processes and Polymers}, publisher={Wiley}, author={Hoppe, Christian and Mitschker, Felix and Mai, Lukas and Liedke, Maciej Oskar and Arcos, Teresa and Awakowicz, Peter and Devi, Anjana and Attallah, Ahmed Gamal and Butterling, Maik and Wagner, Andreas and et al.}, year={2022} }' chicago: Hoppe, Christian, Felix Mitschker, Lukas Mai, Maciej Oskar Liedke, Teresa Arcos, Peter Awakowicz, Anjana Devi, et al. “Influence of Surface Activation on the Microporosity of PE‐CVD and PE‐ALD SiO                          x                        Thin Films on PDMS.” Plasma Processes and Polymers 19, no. 4 (2022). https://doi.org/10.1002/ppap.202100174. ieee: 'C. Hoppe et al., “Influence of surface activation on the microporosity of PE‐CVD and PE‐ALD SiO                          x                        thin films on PDMS,” Plasma Processes and Polymers, vol. 19, no. 4, Art. no. 2100174, 2022, doi: 10.1002/ppap.202100174.' mla: Hoppe, Christian, et al. “Influence of Surface Activation on the Microporosity of PE‐CVD and PE‐ALD SiO                          x                        Thin Films on PDMS.” Plasma Processes and Polymers, vol. 19, no. 4, 2100174, Wiley, 2022, doi:10.1002/ppap.202100174. short: C. Hoppe, F. Mitschker, L. Mai, M.O. Liedke, T. Arcos, P. Awakowicz, A. Devi, A.G. Attallah, M. Butterling, A. Wagner, G. Grundmeier, Plasma Processes and Polymers 19 (2022). date_created: 2022-12-21T09:32:52Z date_updated: 2022-12-21T09:33:14Z department: - _id: '302' doi: 10.1002/ppap.202100174 intvolume: ' 19' issue: '4' keyword: - Polymers and Plastics - Condensed Matter Physics language: - iso: eng publication: Plasma Processes and Polymers publication_identifier: issn: - 1612-8850 - 1612-8869 publication_status: published publisher: Wiley status: public title: Influence of surface activation on the microporosity of PE‐CVD and PE‐ALD SiO x thin films on PDMS type: journal_article user_id: '48864' volume: 19 year: '2022' ... --- _id: '34650' article_number: '2200052' author: - first_name: Xiaofan full_name: Xie, Xiaofan last_name: Xie - first_name: Teresa full_name: de los Arcos, Teresa last_name: de los Arcos - first_name: Guido full_name: Grundmeier, Guido id: '194' last_name: Grundmeier citation: ama: Xie X, de los Arcos T, Grundmeier G. Comparative analysis of hexamethyldisiloxane and hexamethyldisilazane plasma polymer thin films before and after plasma oxidation. Plasma Processes and Polymers. 2022;19(11). doi:10.1002/ppap.202200052 apa: Xie, X., de los Arcos, T., & Grundmeier, G. (2022). Comparative analysis of hexamethyldisiloxane and hexamethyldisilazane plasma polymer thin films before and after plasma oxidation. Plasma Processes and Polymers, 19(11), Article 2200052. https://doi.org/10.1002/ppap.202200052 bibtex: '@article{Xie_de los Arcos_Grundmeier_2022, title={Comparative analysis of hexamethyldisiloxane and hexamethyldisilazane plasma polymer thin films before and after plasma oxidation}, volume={19}, DOI={10.1002/ppap.202200052}, number={112200052}, journal={Plasma Processes and Polymers}, publisher={Wiley}, author={Xie, Xiaofan and de los Arcos, Teresa and Grundmeier, Guido}, year={2022} }' chicago: Xie, Xiaofan, Teresa de los Arcos, and Guido Grundmeier. “Comparative Analysis of Hexamethyldisiloxane and Hexamethyldisilazane Plasma Polymer Thin Films before and after Plasma Oxidation.” Plasma Processes and Polymers 19, no. 11 (2022). https://doi.org/10.1002/ppap.202200052. ieee: 'X. Xie, T. de los Arcos, and G. Grundmeier, “Comparative analysis of hexamethyldisiloxane and hexamethyldisilazane plasma polymer thin films before and after plasma oxidation,” Plasma Processes and Polymers, vol. 19, no. 11, Art. no. 2200052, 2022, doi: 10.1002/ppap.202200052.' mla: Xie, Xiaofan, et al. “Comparative Analysis of Hexamethyldisiloxane and Hexamethyldisilazane Plasma Polymer Thin Films before and after Plasma Oxidation.” Plasma Processes and Polymers, vol. 19, no. 11, 2200052, Wiley, 2022, doi:10.1002/ppap.202200052. short: X. Xie, T. de los Arcos, G. Grundmeier, Plasma Processes and Polymers 19 (2022). date_created: 2022-12-21T09:33:54Z date_updated: 2022-12-21T09:34:05Z department: - _id: '302' doi: 10.1002/ppap.202200052 intvolume: ' 19' issue: '11' keyword: - Polymers and Plastics - Condensed Matter Physics language: - iso: eng publication: Plasma Processes and Polymers publication_identifier: issn: - 1612-8850 - 1612-8869 publication_status: published publisher: Wiley status: public title: Comparative analysis of hexamethyldisiloxane and hexamethyldisilazane plasma polymer thin films before and after plasma oxidation type: journal_article user_id: '48864' volume: 19 year: '2022' ... --- _id: '34247' abstract: - lang: eng text: 'The paper presents research regarding a thermally supported multi-material clinching process (hotclinching) for metal and thermoplastic composite (TPC) sheets: an experimental approach to investigate the flow pressing phenomena during joining. Therefore, an experimental setup is developed to compress the TPC-specimens in out-of-plane direction with different initial TPC thicknesses and varying temperature levels. The deformed specimens are analyzed with computed tomography to investigate the resultant inner material structure at different compaction levels. The results are compared in terms of force-compaction-curves and occurring phenomena during compaction. The change of the material structure is characterized by sliding phenomena and crack initiation and growth.' article_number: '5039' author: - first_name: Benjamin full_name: Gröger, Benjamin last_name: Gröger - first_name: David full_name: Römisch, David last_name: Römisch - first_name: Martin full_name: Kraus, Martin last_name: Kraus - first_name: Juliane full_name: Troschitz, Juliane last_name: Troschitz - first_name: René full_name: Füßel, René last_name: Füßel - first_name: Marion full_name: Merklein, Marion last_name: Merklein - first_name: Maik full_name: Gude, Maik last_name: Gude citation: ama: Gröger B, Römisch D, Kraus M, et al. Warmforming Flow Pressing Characteristics of Continuous Fibre Reinforced Thermoplastic Composites. Polymers. 2022;14(22). doi:10.3390/polym14225039 apa: Gröger, B., Römisch, D., Kraus, M., Troschitz, J., Füßel, R., Merklein, M., & Gude, M. (2022). Warmforming Flow Pressing Characteristics of Continuous Fibre Reinforced Thermoplastic Composites. Polymers, 14(22), Article 5039. https://doi.org/10.3390/polym14225039 bibtex: '@article{Gröger_Römisch_Kraus_Troschitz_Füßel_Merklein_Gude_2022, title={Warmforming Flow Pressing Characteristics of Continuous Fibre Reinforced Thermoplastic Composites}, volume={14}, DOI={10.3390/polym14225039}, number={225039}, journal={Polymers}, publisher={MDPI AG}, author={Gröger, Benjamin and Römisch, David and Kraus, Martin and Troschitz, Juliane and Füßel, René and Merklein, Marion and Gude, Maik}, year={2022} }' chicago: Gröger, Benjamin, David Römisch, Martin Kraus, Juliane Troschitz, René Füßel, Marion Merklein, and Maik Gude. “Warmforming Flow Pressing Characteristics of Continuous Fibre Reinforced Thermoplastic Composites.” Polymers 14, no. 22 (2022). https://doi.org/10.3390/polym14225039. ieee: 'B. Gröger et al., “Warmforming Flow Pressing Characteristics of Continuous Fibre Reinforced Thermoplastic Composites,” Polymers, vol. 14, no. 22, Art. no. 5039, 2022, doi: 10.3390/polym14225039.' mla: Gröger, Benjamin, et al. “Warmforming Flow Pressing Characteristics of Continuous Fibre Reinforced Thermoplastic Composites.” Polymers, vol. 14, no. 22, 5039, MDPI AG, 2022, doi:10.3390/polym14225039. short: B. Gröger, D. Römisch, M. Kraus, J. Troschitz, R. Füßel, M. Merklein, M. Gude, Polymers 14 (2022). date_created: 2022-12-06T18:51:19Z date_updated: 2023-01-02T11:02:56Z department: - _id: '630' doi: 10.3390/polym14225039 intvolume: ' 14' issue: '22' keyword: - Polymers and Plastics - General Chemistry language: - iso: eng main_file_link: - open_access: '1' oa: '1' project: - _id: '130' grant_number: '418701707' name: 'TRR 285: TRR 285' - _id: '131' name: 'TRR 285 - A: TRR 285 - Project Area A' - _id: '137' name: 'TRR 285 – A03: TRR 285 - Subproject A03' - _id: '133' name: 'TRR 285 - C: TRR 285 - Project Area C' - _id: '145' name: 'TRR 285 – C01: TRR 285 - Subproject C01' publication: Polymers publication_identifier: issn: - 2073-4360 publication_status: published publisher: MDPI AG status: public title: Warmforming Flow Pressing Characteristics of Continuous Fibre Reinforced Thermoplastic Composites type: journal_article user_id: '14931' volume: 14 year: '2022' ... --- _id: '35642' abstract: - lang: eng text: 'There is an increasing interest in sensing applications for a variety of analytes in aqueous environments, as conventional methods do not work reliably under humid conditions or they require complex equipment with experienced operators. Hydrogel sensors are easy to fabricate, are incredibly sensitive, and have broad dynamic ranges. Experiments on their robustness, reliability, and reusability have indicated the possible long-term applications of these systems in a variety of fields, including disease diagnosis, detection of pharmaceuticals, and in environmental testing. It is possible to produce hydrogels, which, upon sensing a specific analyte, can adsorb it onto their 3D-structure and can therefore be used to remove them from a given environment. High specificity can be obtained by using molecularly imprinted polymers. Typical detection principles involve optical methods including fluorescence and chemiluminescence, and volume changes in colloidal photonic crystals, as well as electrochemical methods. Here, we explore the current research utilizing hydrogel-based sensors in three main areas: (1) biomedical applications, (2) for detecting and quantifying pharmaceuticals of interest, and (3) detecting and quantifying environmental contaminants in aqueous environments.' article_number: '768' article_type: review author: - first_name: Katharina full_name: Völlmecke, Katharina last_name: Völlmecke - first_name: Rowshon full_name: Afroz, Rowshon last_name: Afroz - first_name: Sascha full_name: Bierbach, Sascha last_name: Bierbach - first_name: Lee Josephine full_name: Brenker, Lee Josephine last_name: Brenker - first_name: Sebastian full_name: Frücht, Sebastian last_name: Frücht - first_name: Alexandra full_name: Glass, Alexandra last_name: Glass - first_name: Ryland full_name: Giebelhaus, Ryland last_name: Giebelhaus - first_name: Axel full_name: Hoppe, Axel last_name: Hoppe - first_name: Karen full_name: Kanemaru, Karen last_name: Kanemaru - first_name: Michal full_name: Lazarek, Michal last_name: Lazarek - first_name: Lukas full_name: Rabbe, Lukas last_name: Rabbe - first_name: Longfei full_name: Song, Longfei last_name: Song - first_name: Andrea full_name: Velasco Suarez, Andrea last_name: Velasco Suarez - first_name: Shuang full_name: Wu, Shuang last_name: Wu - first_name: Michael full_name: Serpe, Michael last_name: Serpe - first_name: Dirk full_name: Kuckling, Dirk id: '287' last_name: Kuckling citation: ama: Völlmecke K, Afroz R, Bierbach S, et al. Hydrogel-Based Biosensors. Gels. 2022;8(12). doi:10.3390/gels8120768 apa: Völlmecke, K., Afroz, R., Bierbach, S., Brenker, L. J., Frücht, S., Glass, A., Giebelhaus, R., Hoppe, A., Kanemaru, K., Lazarek, M., Rabbe, L., Song, L., Velasco Suarez, A., Wu, S., Serpe, M., & Kuckling, D. (2022). Hydrogel-Based Biosensors. Gels, 8(12), Article 768. https://doi.org/10.3390/gels8120768 bibtex: '@article{Völlmecke_Afroz_Bierbach_Brenker_Frücht_Glass_Giebelhaus_Hoppe_Kanemaru_Lazarek_et al._2022, title={Hydrogel-Based Biosensors}, volume={8}, DOI={10.3390/gels8120768}, number={12768}, journal={Gels}, publisher={MDPI AG}, author={Völlmecke, Katharina and Afroz, Rowshon and Bierbach, Sascha and Brenker, Lee Josephine and Frücht, Sebastian and Glass, Alexandra and Giebelhaus, Ryland and Hoppe, Axel and Kanemaru, Karen and Lazarek, Michal and et al.}, year={2022} }' chicago: Völlmecke, Katharina, Rowshon Afroz, Sascha Bierbach, Lee Josephine Brenker, Sebastian Frücht, Alexandra Glass, Ryland Giebelhaus, et al. “Hydrogel-Based Biosensors.” Gels 8, no. 12 (2022). https://doi.org/10.3390/gels8120768. ieee: 'K. Völlmecke et al., “Hydrogel-Based Biosensors,” Gels, vol. 8, no. 12, Art. no. 768, 2022, doi: 10.3390/gels8120768.' mla: Völlmecke, Katharina, et al. “Hydrogel-Based Biosensors.” Gels, vol. 8, no. 12, 768, MDPI AG, 2022, doi:10.3390/gels8120768. short: K. Völlmecke, R. Afroz, S. Bierbach, L.J. Brenker, S. Frücht, A. Glass, R. Giebelhaus, A. Hoppe, K. Kanemaru, M. Lazarek, L. Rabbe, L. Song, A. Velasco Suarez, S. Wu, M. Serpe, D. Kuckling, Gels 8 (2022). date_created: 2023-01-10T08:02:50Z date_updated: 2023-01-10T08:05:30Z department: - _id: '163' doi: 10.3390/gels8120768 intvolume: ' 8' issue: '12' keyword: - Polymers and Plastics - Organic Chemistry - Biomaterials - Bioengineering language: - iso: eng main_file_link: - url: https://www.mdpi.com/2310-2861/8/12/768 publication: Gels publication_identifier: issn: - 2310-2861 publication_status: published publisher: MDPI AG status: public title: Hydrogel-Based Biosensors type: journal_article user_id: '94' volume: 8 year: '2022' ... --- _id: '32865' abstract: - lang: eng text: For the first time, poly(N-isopropylacrylamide) (PNIPAAm) star polymers with a β-cyclodextrin core are characterized in detail by size-exclusion chromatography (SEC) with triple detection to experimentally verify the number of arms. A combination of a refractive index detector, multi-angle laser light scattering detector, and an online-viscosimeter was used for branching analysis. At first, the SEC system was calibrated and the detector setup was validated using linear polystyrene reference polymers. The applicability of the established triple detection SEC for branching analysis was shown by the analysis of two commercially available polystyrene star polymers. Due to the high molar masses of the star polymers, both the contraction ratio g and g′ could be determined independently, thus allowing the calculation of the viscosity shielding ratio ε. Finally, the branching analysis of the PNIPAAm star polymers could experimentally confirm the assumed arm number of up to 21 arms. Moreover, an increasingly compact molecular structure and the influence of the arm number on the viscosity shielding ratio could be shown. author: - first_name: Artjom full_name: Herberg, Artjom id: '94' last_name: Herberg - first_name: Dirk full_name: Kuckling, Dirk id: '287' last_name: Kuckling citation: ama: Herberg A, Kuckling D. Branching analysis of β-cyclodextrin-based poly(N-isopropylacrylamide) star polymers using triple detection SEC. International Journal of Polymer Analysis and Characterization. Published online 2022:1-19. doi:10.1080/1023666x.2022.2110133 apa: Herberg, A., & Kuckling, D. (2022). Branching analysis of β-cyclodextrin-based poly(N-isopropylacrylamide) star polymers using triple detection SEC. International Journal of Polymer Analysis and Characterization, 1–19. https://doi.org/10.1080/1023666x.2022.2110133 bibtex: '@article{Herberg_Kuckling_2022, title={Branching analysis of β-cyclodextrin-based poly(N-isopropylacrylamide) star polymers using triple detection SEC}, DOI={10.1080/1023666x.2022.2110133}, journal={International Journal of Polymer Analysis and Characterization}, publisher={Informa UK Limited}, author={Herberg, Artjom and Kuckling, Dirk}, year={2022}, pages={1–19} }' chicago: Herberg, Artjom, and Dirk Kuckling. “Branching Analysis of β-Cyclodextrin-Based Poly(N-Isopropylacrylamide) Star Polymers Using Triple Detection SEC.” International Journal of Polymer Analysis and Characterization, 2022, 1–19. https://doi.org/10.1080/1023666x.2022.2110133. ieee: 'A. Herberg and D. Kuckling, “Branching analysis of β-cyclodextrin-based poly(N-isopropylacrylamide) star polymers using triple detection SEC,” International Journal of Polymer Analysis and Characterization, pp. 1–19, 2022, doi: 10.1080/1023666x.2022.2110133.' mla: Herberg, Artjom, and Dirk Kuckling. “Branching Analysis of β-Cyclodextrin-Based Poly(N-Isopropylacrylamide) Star Polymers Using Triple Detection SEC.” International Journal of Polymer Analysis and Characterization, Informa UK Limited, 2022, pp. 1–19, doi:10.1080/1023666x.2022.2110133. short: A. Herberg, D. Kuckling, International Journal of Polymer Analysis and Characterization (2022) 1–19. date_created: 2022-08-17T06:28:55Z date_updated: 2023-01-10T08:13:52Z department: - _id: '163' doi: 10.1080/1023666x.2022.2110133 keyword: - Size-exclusion chromatography - triple detection - branching analysis - star polymers - poly(N-isopropylacrylamide) - β-cyclodextrin language: - iso: eng page: 1-19 publication: International Journal of Polymer Analysis and Characterization publication_identifier: issn: - 1023-666X - 1563-5341 publication_status: published publisher: Informa UK Limited status: public title: Branching analysis of β-cyclodextrin-based poly(N-isopropylacrylamide) star polymers using triple detection SEC type: journal_article user_id: '94' year: '2022' ... --- _id: '34733' abstract: - lang: eng text: Due to their valuable properties (low weight, and good thermal and mechanical properties), glass fiber reinforced thermoplastics are becoming increasingly important. Fiber-reinforced thermoplastics are mainly manufactured by injection molding and extrusion, whereby the extrusion compounding process is primarily used to produce fiber-filled granulates. Reproducible production of high-quality components requires a granulate in which the fiber length is even and high. However, the extrusion process leads to the fact that fiber breakages can occur during processing. To enable a significant quality enhancement, experimentally validated modeling is required. In this study, short glass fiber reinforced thermoplastics (polypropylene) were produced on two different twin-screw extruders. Therefore, the machine-specific process behavior is of major interest regarding its influence. First, the fiber length change after processing was determined by experimental investigations and then simulated with the SIGMA simulation software. By comparing the simulation and experimental tests, important insights could be gained and the effects on fiber lengths could be determined in advance. The resulting fiber lengths and distributions were different, not only for different screw configurations (SC), but also for the same screw configurations on different twin-screw extruders. This may have been due to manufacturer-specific tolerances. article_number: '3113' author: - first_name: Annette full_name: Rüppel, Annette last_name: Rüppel - first_name: Susanne full_name: Wolff, Susanne last_name: Wolff - first_name: Jan Philipp full_name: Oldemeier, Jan Philipp id: '56781' last_name: Oldemeier - first_name: Volker full_name: Schöppner, Volker id: '20530' last_name: Schöppner - first_name: Hans-Peter full_name: Heim, Hans-Peter last_name: Heim citation: ama: Rüppel A, Wolff S, Oldemeier JP, Schöppner V, Heim H-P. Influence of Processing Glass-Fiber Filled Plastics on Different Twin-Screw Extruders and Varying Screw Designs on Fiber Length and Particle Distribution. Polymers. 2022;14(15). doi:10.3390/polym14153113 apa: Rüppel, A., Wolff, S., Oldemeier, J. P., Schöppner, V., & Heim, H.-P. (2022). Influence of Processing Glass-Fiber Filled Plastics on Different Twin-Screw Extruders and Varying Screw Designs on Fiber Length and Particle Distribution. Polymers, 14(15), Article 3113. https://doi.org/10.3390/polym14153113 bibtex: '@article{Rüppel_Wolff_Oldemeier_Schöppner_Heim_2022, title={Influence of Processing Glass-Fiber Filled Plastics on Different Twin-Screw Extruders and Varying Screw Designs on Fiber Length and Particle Distribution}, volume={14}, DOI={10.3390/polym14153113}, number={153113}, journal={Polymers}, publisher={MDPI AG}, author={Rüppel, Annette and Wolff, Susanne and Oldemeier, Jan Philipp and Schöppner, Volker and Heim, Hans-Peter}, year={2022} }' chicago: Rüppel, Annette, Susanne Wolff, Jan Philipp Oldemeier, Volker Schöppner, and Hans-Peter Heim. “Influence of Processing Glass-Fiber Filled Plastics on Different Twin-Screw Extruders and Varying Screw Designs on Fiber Length and Particle Distribution.” Polymers 14, no. 15 (2022). https://doi.org/10.3390/polym14153113. ieee: 'A. Rüppel, S. Wolff, J. P. Oldemeier, V. Schöppner, and H.-P. Heim, “Influence of Processing Glass-Fiber Filled Plastics on Different Twin-Screw Extruders and Varying Screw Designs on Fiber Length and Particle Distribution,” Polymers, vol. 14, no. 15, Art. no. 3113, 2022, doi: 10.3390/polym14153113.' mla: Rüppel, Annette, et al. “Influence of Processing Glass-Fiber Filled Plastics on Different Twin-Screw Extruders and Varying Screw Designs on Fiber Length and Particle Distribution.” Polymers, vol. 14, no. 15, 3113, MDPI AG, 2022, doi:10.3390/polym14153113. short: A. Rüppel, S. Wolff, J.P. Oldemeier, V. Schöppner, H.-P. Heim, Polymers 14 (2022). date_created: 2022-12-21T14:06:36Z date_updated: 2023-11-30T14:33:53Z department: - _id: '9' - _id: '367' - _id: '321' doi: 10.3390/polym14153113 intvolume: ' 14' issue: '15' keyword: - Polymers and Plastics - General Chemistry language: - iso: eng publication: Polymers publication_identifier: issn: - 2073-4360 publication_status: published publisher: MDPI AG quality_controlled: '1' status: public title: Influence of Processing Glass-Fiber Filled Plastics on Different Twin-Screw Extruders and Varying Screw Designs on Fiber Length and Particle Distribution type: journal_article user_id: '44116' volume: 14 year: '2022' ... --- _id: '36873' article_number: '2200043' author: - first_name: Vanessa full_name: Neßlinger, Vanessa last_name: Neßlinger - first_name: Stefan full_name: Welzel, Stefan last_name: Welzel - first_name: Florian full_name: Rieker, Florian last_name: Rieker - first_name: Dennis full_name: Meinderink, Dennis id: '32378' last_name: Meinderink orcid: 0000-0002-2755-6514 - first_name: Ulrich full_name: Nieken, Ulrich last_name: Nieken - first_name: Guido full_name: Grundmeier, Guido id: '194' last_name: Grundmeier citation: ama: Neßlinger V, Welzel S, Rieker F, Meinderink D, Nieken U, Grundmeier G. Thin Organic‐Inorganic Anti‐Fouling Hybrid‐Films for Microreactor Components. Macromolecular Reaction Engineering. Published online 2022. doi:10.1002/mren.202200043 apa: Neßlinger, V., Welzel, S., Rieker, F., Meinderink, D., Nieken, U., & Grundmeier, G. (2022). Thin Organic‐Inorganic Anti‐Fouling Hybrid‐Films for Microreactor Components. Macromolecular Reaction Engineering, Article 2200043. https://doi.org/10.1002/mren.202200043 bibtex: '@article{Neßlinger_Welzel_Rieker_Meinderink_Nieken_Grundmeier_2022, title={Thin Organic‐Inorganic Anti‐Fouling Hybrid‐Films for Microreactor Components}, DOI={10.1002/mren.202200043}, number={2200043}, journal={Macromolecular Reaction Engineering}, publisher={Wiley}, author={Neßlinger, Vanessa and Welzel, Stefan and Rieker, Florian and Meinderink, Dennis and Nieken, Ulrich and Grundmeier, Guido}, year={2022} }' chicago: Neßlinger, Vanessa, Stefan Welzel, Florian Rieker, Dennis Meinderink, Ulrich Nieken, and Guido Grundmeier. “Thin Organic‐Inorganic Anti‐Fouling Hybrid‐Films for Microreactor Components.” Macromolecular Reaction Engineering, 2022. https://doi.org/10.1002/mren.202200043. ieee: 'V. Neßlinger, S. Welzel, F. Rieker, D. Meinderink, U. Nieken, and G. Grundmeier, “Thin Organic‐Inorganic Anti‐Fouling Hybrid‐Films for Microreactor Components,” Macromolecular Reaction Engineering, Art. no. 2200043, 2022, doi: 10.1002/mren.202200043.' mla: Neßlinger, Vanessa, et al. “Thin Organic‐Inorganic Anti‐Fouling Hybrid‐Films for Microreactor Components.” Macromolecular Reaction Engineering, 2200043, Wiley, 2022, doi:10.1002/mren.202200043. short: V. Neßlinger, S. Welzel, F. Rieker, D. Meinderink, U. Nieken, G. Grundmeier, Macromolecular Reaction Engineering (2022). date_created: 2023-01-16T08:56:30Z date_updated: 2023-01-16T08:56:52Z department: - _id: '302' doi: 10.1002/mren.202200043 keyword: - Polymers and Plastics - General Chemical Engineering - General Chemistry language: - iso: eng publication: Macromolecular Reaction Engineering publication_identifier: issn: - 1862-832X - 1862-8338 publication_status: published publisher: Wiley status: public title: Thin Organic‐Inorganic Anti‐Fouling Hybrid‐Films for Microreactor Components type: journal_article user_id: '48864' year: '2022' ...