@article{36800, abstract = {{Abstract. The miniaturisation of components leads to new demands on measurement systems. One of these is the resolution. As a volumetric analysis method and method of non-destructive testing, industrial X-ray computed tomography (XCT) has the ability to measure geometrical features and their corresponding dimensions without destroying them and can therefore be used for quality assurance. However, the concept of resolution is not trivial for XCT and has not yet been finally clarified. In particular, the interface structural resolution, the detectability of two surfaces facing each other after surface segmentation, faces a lack of a test specimen, a corresponding measurand and a reliable method. Simulation-based XCT investigations of a method to determine this type of resolution are presented in this article using the geometry of a test specimen that contains several radially arranged holes of the same size. The borehole diameters correspond to the distance between the holes to investigate the resolvability of surfaces and interfaces. The evaluation is based on mean and extreme values of grey value profiles between the individual boreholes of the reconstructed volume. It is shown that the geometrical detectability of the test specimen surface and interface can be extended by a reasonable choice of the threshold value for surface segmentation within a defined interval. With regard to the resolving capability, a distinction is made between assured detectability and possible detectability, as well as the threshold value used when using the ISO50 threshold for surface segmentation and measurement chain completion. }}, author = {{Busch, Matthias and Hausotte, Tino}}, issn = {{2194-878X}}, journal = {{Journal of Sensors and Sensor Systems}}, keywords = {{Electrical and Electronic Engineering, Instrumentation}}, number = {{1}}, pages = {{1--8}}, publisher = {{Copernicus GmbH}}, title = {{{Simulation-based investigation of the metrological interface structural resolution capability of X-ray computed tomography scanners}}}, doi = {{10.5194/jsss-12-1-2023}}, volume = {{12}}, year = {{2023}}, } @inproceedings{37497, abstract = {{Since historical times, cartographic maps have revealed spatial relations and enabled decisions and processes. Geographic Information Systems (GIS) allow for acquisition, management, analysis, and presentation of geospatial objects. With free geospatial data becoming available through open data policies and an increasing amount of digitally connected objects in the Internet of Things (IoT), GIS are becoming indispensable to Information Systems (IS) research. However, the consideration and relevance of GIS has only been investigated rarely. We examine, how and in which fields of application GIS have been studied in the IS literature and elicit the importance of GIS regarding their design and usage. A systematic literature review leads us to develop four research propositions. Our results indicate that GIS are still an undeservedly underrepresented discipline in IS and should be more theorized, put center-stage in design-oriented research, and considered for creating superior value co-creation in service systems.}}, author = {{Priefer, Jennifer}}, booktitle = {{Proceedings of the 56th Hawaii International Conference on System Sciences}}, editor = {{Bui, T.X. and Sprague, R.H.}}, keywords = {{GIS, Industry 4.0, and Sustainability, geographic information systems, geospatial data, gis, information systems research, literature review}}, title = {{{Geographic Information Systems in Information Systems Research - Review and Research Prospects}}}, year = {{2023}}, } @article{41192, abstract = {{AbstractWe examine distortions caused by tax base allocation systems–separate accounting (SA) or formula apportionment (FA)–with respect to the allocation of assets and workforce within multinational entities (MNEs). The effects of both systems are intensively debated by EU Member States as they are striving to implement a European tax system. Its introduction would lead to a switch from SA to FA. Moreover, Pillar One of the recent global tax reform includes a mix of both tax base allocation systems. We find that, against the claims of the EU, FA does not necessarily create lower distortions of the factor allocation. Decisive for that assessment is the level of profit shifting under SA. Our results indicate that, in tendency, the factor allocation is more severely distorted by FA when the profit shifting possibilities were rather low under SA. In contrast to former studies, we highlight the importance of analyzing the status quo under the recently applied system (SA) in order to be able to assess the consequences of a switch from SA to FA. Our results are interesting for policy-makers as they help anticipating reactions of MNEs to a change in the applied tax base allocation system and for companies as a basis for future tax planning.}}, author = {{Ortmann, Regina and Pummerer, Erich}}, issn = {{0044-2372}}, journal = {{Journal of Business Economics}}, keywords = {{Economics and Econometrics, Business and International Management}}, publisher = {{Springer Science and Business Media LLC}}, title = {{{Distortional effects of separate accounting and formula apportionment on factor allocation}}}, doi = {{10.1007/s11573-022-01133-5}}, year = {{2023}}, } @article{41456, abstract = {{Abstract Background The German total diet study (TDS)—BfR MEAL Study—established its food list in 2016 based on food consumption data of children (0.5–<5 years) and adults (14–80 years). The list consists of 356 foods selected for analysis in order to ensure ≥90% coverage of the diet. Recently, new food consumption data for children (0.5–<6 and 6–<12 years) in Germany became available, which raised the opportunity to evaluate the applicability of the MEAL food list 2016 on new data. Objective We tested the hypotheses that the MEAL food list 2016 also covers ≥90% of the diet of the new collected food consumption data, and that the selection of foods from younger children and adults was sufficient to also cover the middle age group (6–<12 years). Strategies for updating the existing food list were assessed. Methods Three approaches evaluated the reusability and potential adjustment strategies of the existing food list. Approach 1 applied the existing food list to new food consumption data. Approach 2 allowed the extension of the existing food list to improve coverage of food consumption. Approach 3 set up a new food list based on the new data. Results The MEAL food list 2016 covered 94% of the overall diet of the new collected food consumption data. The diet of the middle age group was sufficiently covered with 91%. However, coverage on main food group or population subgroup level was <90% in some cases. Approach 3 most accurately identified relevant modifications to the existing food list. 94% of the MEAL food list 2016 could be re-used and 51 new foods were identified as potentially relevant. Significance The results suggest that a high investment in the coverage of a TDS food list will lower the effort and the resources to keep data updated in the long-term. Impact There is no established approach to update a TDS food list. This study provides comparative approaches to handle newly collected food consumption data for follow-on TDS activities. The results provide useful information for institutions planning or updating a TDS. Furthermore, new food consumption data for children in Germany recently became available and are here presented for the first time. }}, author = {{Kolbaum, Anna Elena and Ptok, Sebastian and Jung, Christian and Libuda, Lars and Lindtner, Oliver}}, issn = {{1559-0631}}, journal = {{Journal of Exposure Science & Environmental Epidemiology}}, keywords = {{Public Health, Environmental and Occupational Health, Pollution, Toxicology, Epidemiology}}, publisher = {{Springer Science and Business Media LLC}}, title = {{{Reusability of Germany´s total diet study food list upon availability of new food consumption data—comparison of three update strategies}}}, doi = {{10.1038/s41370-023-00522-4}}, year = {{2023}}, } @article{41929, abstract = {{AbstractThe advent of social media and its commodification have created a never-ending feedback loop between businesses and their customers. In this context, constant negative Word-of-Mouth (NWOM) may jeopardize a corporate image and cause defensiveness in corporate communication. This paper presents a case study of several customer service accounts of the railway company Deutsche Bahn on Twitter to investigate the management and control of constant NWOM and the impact of accountability strategies on customers’ perception of the firm. To this end, a sample of 36,757 Twitter postings was drawn and analyzed by means of sentiment and content analysis techniques. The findings suggest that the perceived accountability towards the firm declined in case of an attitude shift towards the user. In contrast, the firm was being held accountable more insistently after expressed defensiveness, regardless of the firm’s actual accountableness. With this paper, we introduce the notion of accountability management and an accompanying theoretical framework to the literature. This provides a novel perspective on constant NWOM countermeasures for organizations that are part of ‘toxic’ industries or face unrightfully claimed accusations, i.e., when being held accountable for outer circumstances beyond their control.}}, author = {{Mirbabaie, Milad and Stieglitz, Stefan and Marx, Julian}}, issn = {{2366-6153}}, journal = {{Schmalenbach Journal of Business Research}}, keywords = {{Management of Technology and Innovation, General Economics, Econometrics and Finance, General Business, Management and Accounting}}, publisher = {{Springer Science and Business Media LLC}}, title = {{{Negative Word of Mouth On Social Media: A Case Study of Deutsche Bahn’s Accountability Management}}}, doi = {{10.1007/s41471-022-00152-w}}, year = {{2023}}, } @article{42118, author = {{Haase, Franziska Katharina and Prien, Annika and Douw, Linda and Feddermann‐Demont, Nina and Junge, Astrid and Reinsberger, Claus}}, issn = {{0905-7188}}, journal = {{Scandinavian Journal of Medicine & Science in Sports}}, keywords = {{Physical Therapy, Sports Therapy and Rehabilitation, Orthopedics and Sports Medicine}}, publisher = {{Wiley}}, title = {{{Cortical thickness and neurocognitive performance in former high‐level female soccer and non‐contact sport athletes}}}, doi = {{10.1111/sms.14324}}, year = {{2023}}, } @article{42158, author = {{Lüders, Carolin and Gil-Lopez, Jano and Allgaier, Markus and Brecht, Benjamin and Aßmann, Marc and Silberhorn, Christine and Bayer, Manfred}}, issn = {{2331-7019}}, journal = {{Physical Review Applied}}, keywords = {{General Physics and Astronomy}}, number = {{1}}, publisher = {{American Physical Society (APS)}}, title = {{{Tailored Frequency Conversion Makes Infrared Light Visible for Streak Cameras}}}, doi = {{10.1103/physrevapplied.19.014072}}, volume = {{19}}, year = {{2023}}, } @article{42638, abstract = {{ We propose a new method to estimate and isolate the localization of knowledge spillovers due to the physical presence of a person, using after-application but pre-grant deaths of differently located coinventors of the same patent. The approach estimates the differences in local citations between the deceased and still-living inventors at increasingly distant radii. Patents receive 26 percent fewer citations from within a radius of 20 miles around the deceased, relative to still-living coinventors. Differences attenuate with time and distance, are stronger when still-living coinventors live farther from the deceased, and hold for a subsample of possibly premature deaths. (JEL O31, O33, O34, R32) }}, author = {{Balsmeier, Benjamin and Fleming, Lee and Lück, Sonja}}, issn = {{2640-205X}}, journal = {{American Economic Review: Insights}}, keywords = {{Management, Monitoring, Policy and Law, Geography, Planning and Development}}, number = {{1}}, pages = {{21--33}}, publisher = {{American Economic Association}}, title = {{{Isolating Personal Knowledge Spillovers: Coinventor Deaths and Spatial Citation Differentials}}}, doi = {{10.1257/aeri.20210275}}, volume = {{5}}, year = {{2023}}, } @article{42966, author = {{Sherman, David A. and Baumeister, Jochen and Stock, Matt S. and Murray, Amanda M. and Bazett-Jones, David M. and Norte, Grant E.}}, issn = {{1530-0315}}, journal = {{Medicine & Science in Sports & Exercise}}, keywords = {{Physical Therapy, Sports Therapy and Rehabilitation, Orthopedics and Sports Medicine}}, publisher = {{Ovid Technologies (Wolters Kluwer Health)}}, title = {{{Weaker Quadriceps Corticomuscular Coherence in Individuals Following ACL Reconstruction during Force Tracing}}}, doi = {{10.1249/mss.0000000000003080}}, volume = {{Publish Ahead of Print}}, year = {{2023}}, } @article{37267, author = {{Mistry, Aashutosh and Srinivasan, Venkat and Steinrück, Hans-Georg}}, issn = {{1614-6832}}, journal = {{Advanced Energy Materials}}, keywords = {{General Materials Science, Renewable Energy, Sustainability and the Environment}}, pages = {{2203690}}, publisher = {{Wiley}}, title = {{{Characterizing Ion Transport in Electrolytes via Concentration and Velocity Profiles}}}, doi = {{10.1002/aenm.202203690}}, volume = {{13}}, year = {{2023}}, } @article{42165, abstract = {{AbstractComposite materials, such as fiber reinforced polymers, become increasingly important due to their excellent mechanical and lightweight properties. In this respect, this paper reports the characterization of a unidirectional carbon fiber reinforced polymer composite material. Particularly, the mechanical behavior of the overall composite and of the individual constituents of the composite is investigated. To this end, tensile and shear tests are performed for the composite. As a result, statistics for five transversely isotropic material parameters can be established for the composite. For the description of the mechanical properties of the constituents, tensile tests for the carbon fiber as well as for the polymer matrix are carried out. In addition, the volume fraction of fibers in the matrix is determined experimentally using an ashing technique and Archimedes’ principle. For the Young’s modulus of the fiber, the Young’s modulus and transverse contraction of the matrix, as well as the volume fraction of the constituents, statistics can be concluded. The resulting mechanical properties on both scales are useful for the application and validation of different material models and homogenization methods. Finally, in order to validate the obtained properties in the future, inhomogeneous tests were performed, once a flat plate with a hole and a flat plate with semicircular notches.}}, author = {{Penner, Eduard and Caylak, Ismail and Mahnken, Rolf}}, issn = {{1229-9197}}, journal = {{Fibers and Polymers}}, keywords = {{Polymers and Plastics, General Chemical Engineering, General Chemistry}}, publisher = {{Springer Science and Business Media LLC}}, title = {{{Experimental Investigations of Carbon Fiber Reinforced Polymer Composites and Their Constituents to Determine Their Elastic Material Properties and Complementary Inhomogeneous Experiments with Local Strain Considerations}}}, doi = {{10.1007/s12221-023-00122-x}}, year = {{2023}}, } @article{43095, author = {{Lenz, Peter and Mahnken, Rolf}}, issn = {{0263-8223}}, journal = {{Composite Structures}}, keywords = {{Civil and Structural Engineering, Ceramics and Composites}}, publisher = {{Elsevier BV}}, title = {{{Non-local integral-type damage combined to mean-field homogenization methods for composites and its parallel implementation}}}, doi = {{10.1016/j.compstruct.2023.116911}}, year = {{2023}}, } @inproceedings{31849, author = {{Hoffmann, Max and Biehler, Rolf}}, booktitle = {{Proceedings of the Fourth Conference of the International Network for Didactic Research in University Mathematics (INDRUM 2022, 19-22 October 2022)}}, editor = {{Trigueros, Marı́a and Barquero, Berta and Hochmuth, Reinhard and Peters, Jana}}, keywords = {{Teaching and learning of specific topics in university mathematics, Transition to, across and from university mathematics, Student Teachers, Geometry, Congruence, Double Discontinuity.}}, publisher = {{University of Hannover and INDRUM.}}, title = {{{Student Teachers ’ Knowledge of Congruence before a University Course on Geometry}}}, year = {{2023}}, } @article{43421, abstract = {{The achievement of a flat metasurface has realized extraordinary control over light–matter interaction at the nanoscale, enabling widespread use in imaging, holography, and biophotonics. However, three-dimensional metasurfaces with the potential to provide additional light–matter manipulation flexibility attract only little interest. Here, we demonstrate a three-dimensional metasurface scheme capable of providing dual phase control through out-of-plane plasmonic resonance of L-shape antennas. Under circularly polarized excitation at a specific wavelength, the L-shape antennas with rotating orientation angle act as spatially variant three-dimensional tilted dipoles and are able to generate desire phase delay for different polarization components. Generalized Snell's law is achieved for both in-plane and out-of-plane dipole components through arranging such L-shape antennas into arrays. These three-dimensional metasurfaces suggest a route for wavefront modulation and a variety of nanophotonic applications.}}, author = {{Li, Tianyou and Chen, Yanjie and Wang, Yongtian and Zentgraf, Thomas and Huang, Lingling}}, issn = {{0003-6951}}, journal = {{Applied Physics Letters}}, keywords = {{Physics and Astronomy (miscellaneous)}}, number = {{14}}, publisher = {{AIP Publishing}}, title = {{{Three-dimensional dipole momentum analog based on L-shape metasurface}}}, doi = {{10.1063/5.0142389}}, volume = {{122}}, year = {{2023}}, } @article{35160, author = {{Jia, Jichao and Cao, Xue and Ma, Xuekai and De, Jianbo and Yao, Jiannian and Schumacher, Stefan and Liao, Qing and Fu, Hongbing}}, issn = {{2041-1723}}, journal = {{Nature Communications}}, keywords = {{General Physics and Astronomy, General Biochemistry, Genetics and Molecular Biology, General Chemistry, Multidisciplinary}}, number = {{1}}, publisher = {{Springer Science and Business Media LLC}}, title = {{{Circularly polarized electroluminescence from a single-crystal organic microcavity light-emitting diode based on photonic spin-orbit interactions}}}, doi = {{10.1038/s41467-022-35745-w}}, volume = {{14}}, year = {{2023}}, } @article{42953, author = {{Cara, Eleonora and Hönicke, Philipp and Kayser, Yves and Lindner, Jörg K. N. and Castellino, Micaela and Murataj, Irdi and Porro, Samuele and Angelini, Angelo and De Leo, Natascia and Pirri, Candido Fabrizio and Beckhoff, Burkhard and Boarino, Luca and Ferrarese Lupi, Federico}}, issn = {{2637-6105}}, journal = {{ACS Applied Polymer Materials}}, keywords = {{Organic Chemistry, Polymers and Plastics, Process Chemistry and Technology}}, number = {{3}}, pages = {{2079--2087}}, publisher = {{American Chemical Society (ACS)}}, title = {{{Developing Quantitative Nondestructive Characterization of Nanomaterials: A Case Study on Sequential Infiltration Synthesis of Block Copolymers}}}, doi = {{10.1021/acsapm.2c02094}}, volume = {{5}}, year = {{2023}}, } @article{43105, author = {{Black, Tobias and Fuest, Mario and Lankeit, Johannes and Mizukami, Masaaki}}, issn = {{1468-1218}}, journal = {{Nonlinear Analysis: Real World Applications}}, keywords = {{Applied Mathematics, Computational Mathematics, General Economics, Econometrics and Finance, General Engineering, General Medicine, Analysis}}, publisher = {{Elsevier BV}}, title = {{{Possible points of blow-up in chemotaxis systems with spatially heterogeneous logistic source}}}, doi = {{10.1016/j.nonrwa.2023.103868}}, volume = {{73}}, year = {{2023}}, } @article{43154, author = {{Wippermann, Jan and Meschut, Gerson and Koshukow, Wikentij and Liebsch, Alexander and Gude, Maik and Minch, Steven and Kolbe, Björn}}, issn = {{0043-2288}}, journal = {{Welding in the World}}, keywords = {{Metals and Alloys, Mechanical Engineering, Mechanics of Materials}}, publisher = {{Springer Science and Business Media LLC}}, title = {{{Correction: Thermal influence of resistance spot welding on a nearby overmolded thermoplastic–metal joint}}}, doi = {{10.1007/s40194-023-01499-2}}, year = {{2023}}, } @article{43456, author = {{Brosch, Anian and Wallscheid, Oliver and Böcker, Joachim}}, issn = {{0885-8993}}, journal = {{IEEE Transactions on Power Electronics}}, keywords = {{Electrical and Electronic Engineering}}, pages = {{1--14}}, publisher = {{Institute of Electrical and Electronics Engineers (IEEE)}}, title = {{{Time-Optimal Model Predictive Control of Permanent Magnet Synchronous Motors Considering Current and Torque Constraints}}}, doi = {{10.1109/tpel.2023.3265705}}, year = {{2023}}, } @article{42973, author = {{Lüders, Carolin and Pukrop, Matthias and Barkhausen, Franziska and Rozas, Elena and Schneider, Christian and Höfling, Sven and Sperling, Jan and Schumacher, Stefan and Aßmann, Marc}}, issn = {{0031-9007}}, journal = {{Physical Review Letters}}, keywords = {{General Physics and Astronomy}}, number = {{11}}, publisher = {{American Physical Society (APS)}}, title = {{{Tracking Quantum Coherence in Polariton Condensates with Time-Resolved Tomography}}}, doi = {{10.1103/physrevlett.130.113601}}, volume = {{130}}, year = {{2023}}, }