@article{45931,
  abstract     = {{<jats:p>This paper aims to present an approach for the planning of carbon low heat supply in a future district heating system based on open data for German cities with existing district heating networks. One focus is on the integration of industrial waste heat and the uncertainty of future waste heat sources as well as restrictions on the use of biomass. For that purpose, knowledge about the energy demand is necessary. In a first step it is shown how the demand around a heating network is estimated with spatial data and a load profile is generated. Local available heat sources are examined according to their suitability and their kind of integration in the heating network. As heat production from different units are optimised, the development of a simulation model will be presented. The simulation is based on the optimisation of the operational costs of the used technologies for heating supply. Different scenarios covering various technologies and economic assumptions are applied. The results show the levelized costs of heating as well as the ecological performance. A sensitivity analysis shows the importance of uncertainties for the economic assumptions. The results showing levelized costs of heating as well as the ecological performance underlining the advantage of excess heat integration.</jats:p>}},
  author       = {{Divkovic, Denis and Knorr, Lukas and Meschede, Henning}},
  issn         = {{2246-2929}},
  journal      = {{International Journal of Sustainable Energy Planning and Management}},
  keywords     = {{Energy Engineering and Power Technology, Renewable Energy, Sustainability and the Environment, Geography, Planning and Development}},
  pages        = {{141--156}},
  publisher    = {{Aalborg University}},
  title        = {{{Design approach to extend and decarbonise existing district heating systems - case study for German cities}}},
  doi          = {{10.54337/ijsepm.7655}},
  volume       = {{38}},
  year         = {{2023}},
}

@article{45981,
  abstract     = {{Jede Schwangerschaft bringt physische, psychische und soziale Veränderungen mit sich. Diese können zu Stress und ambivalenten Gefühlen bei  Schwangeren führen, die einen starken Einfluss auf das Wohlbefinden und die Gesundheit von Mutter und Kind haben. Zur Förderung eines komplikationslosen Verlaufs der Schwangerschaft wird in der Forschungsliteratur die Stärkung der gesundheitlichen Ressourcen gefordert. Das Zürcher Ressourcen Modell (ZRM) ist ein ressourcenaktivierendes Selbstmanagementtraining, welches nach aktuellen Studienergebnissen die Gefühlsregulierung unterstützen und Stress reduzieren kann. Ziel dieser Studie war die erstmalige Wirksamkeitsprüfung des ZRM in der Schwangerschaft. Angenommen wurde, dass durch die Aktivierung der persönlichen Ressourcen der Schwangeren das Stresserleben reduziert und das subjektive Wohlbefinden gesteigert werden kann. Die Konstrukte „Stress“ und „Wohlbefinden“ wurden anhand von fünf psychometrischen Parametern operationalisiert. Durchgeführt wurde eine quasiexperimentelle unkontrollierte 6‑stündige Online-Interventionsstudie mit dem ZRM im Januar 2021 an <jats:italic>N</jats:italic> = 32 Schwangeren, basierend auf einem Prä-Post-Follow-up-Design. Zur Überprüfung der gebildeten Hypothesen wurden einfaktorielle Varianzanalysen (rmANOVAs) durchgeführt.
Die 1-faktoriellen rmANOVAs ergaben, dass die ZRM-Intervention das Stresserleben allgemein und schwangerschaftsspezifisch sowie das Angsterleben signifikant senken konnte. Handlungsorientierung nach Misserfolg und emotionales Wohlbefinden konnten signifikant gesteigert werden. Hinsichtlich der subjektiven Vitalität ließ sich lediglich deskriptiv eine Steigerung der Werte verzeichnen.
Die ZRM-Intervention erwies sich als wirksame Methode zur Optimierung der Stressbewältigung und Steigerung des Wohlbefindens während der Schwangerschaft. Es kann zielführend sein, das ZRM-Training als Ergänzung zur üblichen Geburtsvorbereitung  einzusetzen. Zukünftige Forschungsarbeiten sollten v. a. die Übertragbarkeit der Ergebnisse unter Einbindung einer Kontrollgruppe sicherstellen.}},
  author       = {{Schneider, Tamara and Weber, Julia and Bauer, Nicola H.}},
  issn         = {{1861-6755}},
  journal      = {{Prävention und Gesundheitsförderung}},
  keywords     = {{Public Health, Environmental and Occupational Health}},
  publisher    = {{Springer Science and Business Media LLC}},
  title        = {{{„Löwenstark in der Schwangerschaft!“ Ressourcenaktivierung und Stressreduktion mit dem Zürcher Ressourcen Modell (ZRM®) – eine unkontrollierte Interventionsstudie }}},
  doi          = {{10.1007/s11553-023-01058-z}},
  year         = {{2023}},
}

@article{46132,
  author       = {{Littmann, Mario and Reuter, Dirk and As, Donat Josef}},
  issn         = {{0370-1972}},
  journal      = {{physica status solidi (b)}},
  keywords     = {{Condensed Matter Physics, Electronic, Optical and Magnetic Materials}},
  number       = {{7}},
  publisher    = {{Wiley}},
  title        = {{{Remote Epitaxy of Cubic Gallium Nitride on Graphene‐Covered 3C‐SiC Substrates by Plasma‐Assisted Molecular Beam Epitaxy}}},
  doi          = {{10.1002/pssb.202300034}},
  volume       = {{260}},
  year         = {{2023}},
}

@article{46138,
  abstract     = {{<jats:p>This work reports a fully guided setup for single-mode squeezing on integrated titanium-indiffused periodically poled nonlinear resonators. A continuous-wave laser beam is delivered and the squeezed field is collected by single-mode fibers; up to −3.17(9) dB of useful squeezing is available in fibers. To showcase the usefulness of such a fiber-coupled device, we applied the generated squeezed light in a fiber-based phase sensing experiment, showing a quantum enhancement in the signal-to-noise ratio of 0.35 dB. Moreover, our investigation of the effect of photorefraction on the cavity resonance condition suggests that it causes system instabilities at high powers.</jats:p>}},
  author       = {{Domeneguetti, Renato and Stefszky, Michael and Herrmann, Harald and Silberhorn, Christine and Andersen, Ulrik L. and Neergaard-Nielsen, Jonas S. and Gehring, Tobias}},
  issn         = {{0146-9592}},
  journal      = {{Optics Letters}},
  keywords     = {{Atomic and Molecular Physics, and Optics}},
  number       = {{11}},
  publisher    = {{Optica Publishing Group}},
  title        = {{{Fully guided and phase locked Ti:PPLN waveguide squeezing for applications in quantum sensing}}},
  doi          = {{10.1364/ol.486654}},
  volume       = {{48}},
  year         = {{2023}},
}

@article{46147,
  author       = {{Brosch, Anian and Tinazzi, Fabio and Wallscheid, Oliver and Zigliotto, Mauro and Böcker, Joachim}},
  issn         = {{0885-8993}},
  journal      = {{IEEE Transactions on Power Electronics}},
  keywords     = {{Electrical and Electronic Engineering}},
  publisher    = {{Institute of Electrical and Electronics Engineers (IEEE)}},
  title        = {{{Finite Set Sensorless Control With Minimum a Priori Knowledge and Tuning Effort for Interior Permanent Magnet Synchronous Motors}}},
  doi          = {{10.1109/tpel.2023.3294557}},
  year         = {{2023}},
}

@article{46213,
  author       = {{Weber, Daniel and Schenke, Maximilian and Wallscheid, Oliver}},
  issn         = {{2169-3536}},
  journal      = {{IEEE Access}},
  keywords     = {{General Engineering, General Materials Science, General Computer Science, Electrical and Electronic Engineering}},
  pages        = {{76524--76536}},
  publisher    = {{Institute of Electrical and Electronics Engineers (IEEE)}},
  title        = {{{Steady-State Error Compensation for Reinforcement Learning-Based Control of Power Electronic Systems}}},
  doi          = {{10.1109/access.2023.3297274}},
  volume       = {{11}},
  year         = {{2023}},
}

@article{46217,
  author       = {{Renner, Britta and Buyken, Anette and Gedrich, Kurt and Lorkowski, Stefan and Watzl, Bernhard and Linseisen, Jakob and Daniel, Hannelore and Conrad, Johanna and Ferrario, Paola G. and Holzapfel, Christina and Leitzmann, Michael and Richter, Margrit and Simon, Marie-Christine and Sina, Christian and Wirsam, Jan}},
  issn         = {{2161-8313}},
  journal      = {{Advances in Nutrition}},
  keywords     = {{Nutrition and Dietetics, Medicine (miscellaneous), Food Science}},
  publisher    = {{Elsevier BV}},
  title        = {{{Perspective: A Conceptual Framework for Adaptive Personalized Nutrition Advice Systems}}},
  doi          = {{10.1016/j.advnut.2023.06.009}},
  year         = {{2023}},
}

@article{45361,
  abstract     = {{<jats:p> The non-orthogonal local submatrix method applied to electronic structure–based molecular dynamics simulations is shown to exceed 1.1 EFLOP/s in FP16/FP32-mixed floating-point arithmetic when using 4400 NVIDIA A100 GPUs of the Perlmutter system. This is enabled by a modification of the original method that pushes the sustained fraction of the peak performance to about 80%. Example calculations are performed for SARS-CoV-2 spike proteins with up to 83 million atoms. </jats:p>}},
  author       = {{Schade, Robert and Kenter, Tobias and Elgabarty, Hossam and Lass, Michael and Kühne, Thomas and Plessl, Christian}},
  issn         = {{1094-3420}},
  journal      = {{The International Journal of High Performance Computing Applications}},
  keywords     = {{Hardware and Architecture, Theoretical Computer Science, Software}},
  publisher    = {{SAGE Publications}},
  title        = {{{Breaking the exascale barrier for the electronic structure problem in ab-initio molecular dynamics}}},
  doi          = {{10.1177/10943420231177631}},
  year         = {{2023}},
}

@article{44851,
  abstract     = {{<jats:p>We present the fabrication of strain-free quantum dots in the In0.53Ga0.47As/In0.52Al0.48As-system lattice matched to InP, as future sources for single and entangled photons for long-haul fiber-based quantum communication in the optical C-band. We achieved these quantum dots by local droplet etching via InAl droplets in an In0.52Al0.48As layer and subsequent filling of the holes with In0.53Ga0.47As. Here, we present detailed investigations of the hole morphologies measured by atomic force microscopy. Statistical analysis of a set of nanoholes reveals a high degree of symmetry for nearly half of them when etched at optimized temperatures. Overgrowth with 50–150 nm In0.52Al0.48As increases their diameter and elongates the holes along the [01̄1]-direction. By systematically scanning the parameter space, we were able to fill the holes with In0.53Ga0.47As, and by capping the filled holes and performing photoluminescence measurements, we observe photoluminescence emission in the O-band up into the C-band depending on the filling height of the nanoholes.</jats:p>}},
  author       = {{Deutsch, D. and Buchholz, C. and Zolatanosha, V. and Jöns, K. D. and Reuter, D.}},
  issn         = {{2158-3226}},
  journal      = {{AIP Advances}},
  keywords     = {{General Physics and Astronomy}},
  number       = {{5}},
  publisher    = {{AIP Publishing}},
  title        = {{{Telecom C-band photon emission from (In,Ga)As quantum dots generated by filling nanoholes in In0.52Al0.48As layers}}},
  doi          = {{10.1063/5.0147281}},
  volume       = {{13}},
  year         = {{2023}},
}

@article{46480,
  author       = {{Müller, Hendrik and Weinberger, Christian and Grundmeier, Guido and de los Arcos de Pedro, Maria Teresa}},
  issn         = {{0368-2048}},
  journal      = {{Journal of Electron Spectroscopy and Related Phenomena}},
  keywords     = {{Physical and Theoretical Chemistry, Spectroscopy, Condensed Matter Physics, Atomic and Molecular Physics, and Optics, Radiation, Electronic, Optical and Magnetic Materials}},
  publisher    = {{Elsevier BV}},
  title        = {{{UV-enhanced environmental charge compensation in near ambient pressure XPS}}},
  doi          = {{10.1016/j.elspec.2023.147317}},
  volume       = {{264}},
  year         = {{2023}},
}

@article{46503,
  abstract     = {{<jats:sec>
<jats:title content-type="abstract-subheading">Purpose</jats:title>
<jats:p>The purpose of this study is to investigate the manufacturability of Fe-3Si lattice structures and the resulting mechanical properties. This study could lead to the successful processing of squirrel cage conductors (a lattice structure by design) of an induction motor by additive manufacturing in the future.</jats:p>
</jats:sec>
<jats:sec>
<jats:title content-type="abstract-subheading">Design/methodology/approach</jats:title>
<jats:p>The compression behaviour of two lattice structures where struts are arranged in a face-centred cubic position and vertical edges (FCCZ), and struts are placed at body-centred cubic (BCC) positions, prepared by laser powder bed fusion (LPBF), is explored. The experimental investigations are supported by finite element method (FEM) simulations.</jats:p>
</jats:sec>
<jats:sec>
<jats:title content-type="abstract-subheading">Findings</jats:title>
<jats:p>The FCCZ lattice structure presents a peak in the stress-strain curve, whereas the BCC lattice structure manifests a plateau. The vertical struts aligned along the compression direction lead to a significant increase in the load-carrying ability of FCCZ lattice structures compared to BCC lattice structures. This results in a peak in the stress-strain curve. However, the BCC lattice structure presents the bending of struts with diagonal struts carrying the major loads with struts near the faceplate receiving the least load. A high concentration of geometrically necessary dislocations (GNDs) near the grain boundaries along cell formation is observed in the microstructure.</jats:p>
</jats:sec>
<jats:sec>
<jats:title content-type="abstract-subheading">Originality/value</jats:title>
<jats:p>To the best of the authors’ knowledge, this is the first study on additive manufacturing of Fe-3Si lattice structures. Currently, there are no investigations in the literature on the manufacturability and mechanical properties of Fe-3Si lattice structures.</jats:p>
</jats:sec>}},
  author       = {{Pramanik, Sudipta and Hoyer, Kay-Peter and Schaper, Mirko}},
  issn         = {{1355-2546}},
  journal      = {{Rapid Prototyping Journal}},
  keywords     = {{Industrial and Manufacturing Engineering, Mechanical Engineering}},
  number       = {{6}},
  pages        = {{1257--1269}},
  publisher    = {{Emerald}},
  title        = {{{Experimental and finite element method investigation on the compression behaviour of FCCZ and BCC lattice structures of additively manufactured Fe-3Si samples}}},
  doi          = {{10.1108/rpj-06-2022-0190}},
  volume       = {{29}},
  year         = {{2023}},
}

@article{46517,
  author       = {{Ahmed, Abdullah Fathi and Sherif, Mohamed Ahmed and Ngomo, Axel-Cyrille Ngonga}},
  issn         = {{2169-3536}},
  journal      = {{IEEE Access}},
  keywords     = {{General Engineering, General Materials Science, General Computer Science, Electrical and Electronic Engineering}},
  pages        = {{1--1}},
  publisher    = {{Institute of Electrical and Electronics Engineers (IEEE)}},
  title        = {{{NELLIE: Never-Ending Linking for Linked Open Data}}},
  doi          = {{10.1109/access.2023.3300694}},
  year         = {{2023}},
}

@article{46542,
  abstract     = {{<jats:p>Multiprotein adsorption from complex body fluids represents a highly important and complicated phenomenon in medicine. In this work, multiprotein adsorption from diluted human serum at gold and oxidized iron surfaces is investigated at different serum concentrations and pH values. Adsorption-induced changes in surface topography and the total amount of adsorbed proteins are quantified by atomic force microscopy (AFM) and polarization-modulation infrared reflection absorption spectroscopy (PM-IRRAS), respectively. For both surfaces, stronger protein adsorption is observed at pH 6 compared to pH 7 and pH 8. PM-IRRAS furthermore provides some qualitative insights into the pH-dependent alterations in the composition of the adsorbed multiprotein films. Changes in the amide II/amide I band area ratio and in particular side-chain IR absorption suggest that the increased adsorption at pH 6 is accompanied by a change in protein film composition. Presumably, this is mostly driven by the adsorption of human serum albumin, which at pH 6 adsorbs more readily and thereby replaces other proteins with lower surface affinities in the resulting multiprotein film.</jats:p>}},
  author       = {{Huang, Jingyuan and Qiu, Yunshu and Lücke, Felix and Su, Jiangling and Grundmeier, Guido and Keller, Adrian}},
  issn         = {{1420-3049}},
  journal      = {{Molecules}},
  keywords     = {{Chemistry (miscellaneous), Analytical Chemistry, Organic Chemistry, Physical and Theoretical Chemistry, Molecular Medicine, Drug Discovery, Pharmaceutical Science}},
  number       = {{16}},
  publisher    = {{MDPI AG}},
  title        = {{{Multiprotein Adsorption from Human Serum at Gold and Oxidized Iron Surfaces Studied by Atomic Force Microscopy and Polarization-Modulation Infrared Reflection Absorption Spectroscopy}}},
  doi          = {{10.3390/molecules28166060}},
  volume       = {{28}},
  year         = {{2023}},
}

@article{46543,
  abstract     = {{<jats:p>The influence of nanoscale surface topography on protein adsorption is highly important for numerous applications in medicine and technology. Herein, ferritin adsorption at flat and nanofaceted, single-crystalline Al2O3 surfaces is investigated using atomic force microscopy and X-ray photoelectron spectroscopy. The nanofaceted surfaces are generated by the thermal annealing of Al2O3 wafers at temperatures above 1000 °C, which leads to the formation of faceted saw-tooth-like surface topographies with periodicities of about 160 nm and amplitudes of about 15 nm. Ferritin adsorption at these nanofaceted surfaces is notably suppressed compared to the flat surface at a concentration of 10 mg/mL, which is attributed to lower adsorption affinities of the newly formed facets. Consequently, adsorption is restricted mostly to the pattern grooves, where the proteins can maximize their contact area with the surface. However, this effect depends on the protein concentration, with an inverse trend being observed at 30 mg/mL. Furthermore, different ferritin adsorption behavior is observed at topographically similar nanofacet patterns fabricated at different annealing temperatures and attributed to different step and kink densities. These results demonstrate that while protein adsorption at solid surfaces can be notably affected by nanofacet patterns, fine-tuning protein adsorption in this way requires the precise control of facet properties.</jats:p>}},
  author       = {{Pothineni, Bhanu K. and Kollmann, Sabrina and Li, Xinyang and Grundmeier, Guido and Erb, Denise J. and Keller, Adrian}},
  issn         = {{1422-0067}},
  journal      = {{International Journal of Molecular Sciences}},
  keywords     = {{Inorganic Chemistry, Organic Chemistry, Physical and Theoretical Chemistry, Computer Science Applications, Spectroscopy, Molecular Biology, General Medicine, Catalysis}},
  number       = {{16}},
  publisher    = {{MDPI AG}},
  title        = {{{Adsorption of Ferritin at Nanofaceted Al2O3 Surfaces}}},
  doi          = {{10.3390/ijms241612808}},
  volume       = {{24}},
  year         = {{2023}},
}

@techreport{46521,
  author       = {{Freise, Diana and Schiele, Valentin and Schmitz, Hendrik}},
  issn         = {{1556-5068}},
  keywords     = {{General Earth and Planetary Sciences, General Environmental Science}},
  publisher    = {{Elsevier BV}},
  title        = {{{Housing Situations and Local COVID-19 Infection Dynamics – A Case Study With Small-Area Data}}},
  doi          = {{10.2139/ssrn.4372490}},
  year         = {{2023}},
}

@article{46644,
  abstract     = {{A reliable, but cost-effective generation of single-photon states is key for practical quantum communication systems. For real-world deployment, waveguide sources offer optimum compatibility with fiber networks and can be embedded in hybrid integrated modules. Here, we present what we believe to be the first chip-size fully integrated fiber-coupled heralded single photon source (HSPS) module based on a hybrid integration of a nonlinear lithium niobate waveguide into a polymer board. Photon pairs at 810 nm (signal) and 1550 nm (idler) are generated via parametric down-conversion pumped at 532 nm in the LiNbO3 waveguide. The pairs are split in the polymer board and routed to separate output ports. The module has a size of (2 × 1) cm^2 and is fully fiber-coupled with one pump input fiber and two output fibers. We measure a heralded second-order correlation function of g_h(2)=0.05 with a heralding efficiency of η_h=3.5% at low pump powers}},
  author       = {{Kießler, Christian and Conradi, Hauke and Kleinert, Moritz and Quiring, Viktor and Herrmann, Harald and Silberhorn, Christine}},
  issn         = {{1094-4087}},
  journal      = {{Optics Express}},
  keywords     = {{Atomic and Molecular Physics, and Optics}},
  number       = {{14}},
  publisher    = {{Optica Publishing Group}},
  title        = {{{Fiber-coupled plug-and-play heralded single photon source based on Ti:LiNbO3 and polymer technology}}},
  doi          = {{10.1364/oe.487581}},
  volume       = {{31}},
  year         = {{2023}},
}

@article{46487,
  author       = {{Zander, K.K. and Nguyen, D. and Mirbabaie, Milad and Garnett, S.T.}},
  issn         = {{2212-4209}},
  journal      = {{International Journal of Disaster Risk Reduction}},
  keywords     = {{Geology, Safety Research, Geotechnical Engineering and Engineering Geology, Building and Construction}},
  publisher    = {{Elsevier BV}},
  title        = {{{Aware but not prepared: understanding situational awareness during the century flood in Germany in 2021}}},
  doi          = {{10.1016/j.ijdrr.2023.103936}},
  volume       = {{96}},
  year         = {{2023}},
}

@article{45458,
  author       = {{Stieglitz, Stefan and Mirbabaie, Milad and Deubel, Annika and Braun, Lea-Marie and Kissmer, Tobias}},
  issn         = {{0268-4012}},
  journal      = {{International Journal of Information Management}},
  keywords     = {{Library and Information Sciences, Computer Networks and Communications, Information Systems}},
  publisher    = {{Elsevier BV}},
  title        = {{{The potential of digital nudging to bridge the gap between environmental attitude and behavior in the usage of smart home applications}}},
  doi          = {{10.1016/j.ijinfomgt.2023.102665}},
  volume       = {{72}},
  year         = {{2023}},
}

@article{46784,
  author       = {{Wallscheid, Oliver and Peitz, Sebastian and Stenner, Jan and Weber, Daniel and Boshoff, Septimus and Meyer, Marvin and Chidananda, Vikas and Schweins, Oliver}},
  issn         = {{2475-9066}},
  journal      = {{Journal of Open Source Software}},
  keywords     = {{General Earth and Planetary Sciences, General Environmental Science}},
  number       = {{89}},
  publisher    = {{The Open Journal}},
  title        = {{{ElectricGrid.jl - A Julia-based modeling and simulationtool for power electronics-driven electric energy grids}}},
  doi          = {{10.21105/joss.05616}},
  volume       = {{8}},
  year         = {{2023}},
}

@article{46818,
  abstract     = {{<jats:title>Abstract</jats:title><jats:sec><jats:title>Objective</jats:title><jats:p>Concerns about short‐ and long‐term consequences of repetitive heading contributed to heading restrictions in youth football in some countries. This prospective longitudinal cohort study aims to describe heading exposure in children's and youth football over two seasons using standardized video analysis.</jats:p></jats:sec><jats:sec><jats:title>Methods</jats:title><jats:p>All matches and training sessions of a male Under‐11 (<jats:italic>n</jats:italic> = 29), Under‐15 (<jats:italic>n</jats:italic> = 28), Under‐19 (<jats:italic>n</jats:italic> = 38), and female Under‐17 (<jats:italic>n</jats:italic> = 39) team were videotaped during the seasons 2019–2020 and 2020–2021. Heading frequencies and characteristics were analyzed. Individual heading exposure is presented as average incidence rates (IR) per 1000 match/training hours.</jats:p></jats:sec><jats:sec><jats:title>Results</jats:title><jats:p>In 275 matches and 673 training sessions, 22 921 headers were observed. Heading IR per player in matches was 1256 (Under‐11 m), 1608 (Under‐15 m), 1050 (Under‐17 f), and 1966 (Under‐19 m). In training sessions, IR per player was 739 (Under‐11 m), 2206 (Under‐15 m), 1661 (Under‐17 f), and 1419 (Under‐19 m). Five Under‐15 males headed the ball five to eight times per training on average. Most headers were performed without heading duels. Flight distance was predominantly 5–20 m (54%) in matches and &lt;5 m (65%) in training. While head impact location most frequently was at frontal areas, one‐third of all headers in Under‐11 in matches hit temporal, parietal, and occipital parts of the head.</jats:p></jats:sec><jats:sec><jats:title>Conclusion</jats:title><jats:p>Heading incidence was low in the youngest age group, whereas (predominantly five) Under‐15 males showed very high heading exposures in training. In assessment and regulation of heading burden, training sessions and individual heading behavior should specifically be addressed. Recommendations for heading the ball in practice should account for individual and age‐related differences.</jats:p></jats:sec>}},
  author       = {{Reeschke, Rebecca and Haase, Franziska Katharina and Dautzenberg, Lena and Krutsch, Werner and Reinsberger, Claus}},
  issn         = {{0905-7188}},
  journal      = {{Scandinavian Journal of Medicine & Science in Sports}},
  keywords     = {{Physical Therapy, Sports Therapy and Rehabilitation, Orthopedics and Sports Medicine}},
  number       = {{9}},
  pages        = {{1821--1830}},
  publisher    = {{Wiley}},
  title        = {{{Training matters: Heading incidence and characteristics in children's and youth football (soccer) players}}},
  doi          = {{10.1111/sms.14408}},
  volume       = {{33}},
  year         = {{2023}},
}