@article{46815, abstract = {{In this work, the influence of the filler–matrix adhesion on the tensile properties of laser-sintered parts built with Polyamide 613 filled with glass beads was investigated. For this purpose, dry blends of glass beads with and without organosilane coupling agents and polyamide powder were prepared and processed into tensile specimens on an EOS P396 laser sintering system. The samples were tested both in the dry state and after an accelerated conditioning in a climate chamber. Furthermore, finite element method (FEM) simulations were performed to model the extreme cases of optimum adhesion and no adhesion. By correlating the tensile tests with the simulation results and by analyzing the fracture surfaces, it was shown that the filler–matrix adhesion is sufficient in the dry state but is strongly degraded by conditioning. Even the presence of various organosilane thin films could not prevent a strong deterioration of the filler–matrix adhesion and the associated deterioration of the mechanical properties. Since a comparison with an injection-molded sample of the same polymer filler combination shows identical behavior after conditioning, it is assumed that this problem is not limited to additively manufactured parts.}}, author = {{Kletetzka, Ivo and Kosanke, Maren and Meinderink, Dennis and Neßlinger, Vanessa and Grundmeier, Guido and Schmid, Hans-Joachim}}, issn = {{2363-9512}}, journal = {{Progress in Additive Manufacturing}}, keywords = {{Industrial and Manufacturing Engineering}}, publisher = {{Springer Science and Business Media LLC}}, title = {{{Influence of the filler–matrix adhesion and the effects of conditioning on tensile properties of laser-sintered parts built with polyamide–glass bead dry blends}}}, doi = {{10.1007/s40964-023-00501-z}}, year = {{2023}}, } @article{37466, abstract = {{Typically, head fakes in basketball are generated to, and actually do, deteriorate performance on the side of the observer. However, potential costs at the side of the producer of a fake action have only rarely been investigated before. It is thus not clear yet if the benefit (i.e., slowed reactions in the observer) of performing a head fake is overestimated due to concurrently arising fake production costs (i.e., slowed performance in the producer of a head fake). Therefore, we studied potential head-fake production costs with two experiments. Novice participants were asked to generate passes to the left or right side, either with or without head fakes. In Experiment 1, these actions were determined by an auditory stimulus (i.e., a 440 Hz or 1200 Hz sinus or jigsaw wave). After an interstimulus interval (ISI) of either 0 ms, 800 ms, or 1500 ms, which served the preparation of the action, the cued action had to be executed. In Experiment 2, passing to the left or right, either with or without a head fake, was determined by a visual stimulus (i.e., a player with a red or blue jersey defending either the right or left side). After an ISI of either 0 ms, 400 ms, 800 ms, or 1200 ms, the cued action had to be executed. In both experiments, we observed higher reaction times (RTs) for passes with head fakes as compared to passes without head fakes for no and an intermediate preparation interval (from ISI 0 ms to 800 ms), but no difference for a long preparation interval (for an ISI of 1200 ms and 1500 ms). Both experiments show that generating fake actions produces performance costs, however, these costs can be overcome by a longer preparation phase before movement execution.}}, author = {{Güldenpenning, Iris and Weigelt, Matthias and Böer, Nils Tobias and Kunde, Wilfried}}, issn = {{0167-9457}}, journal = {{Human Movement Science}}, keywords = {{Experimental and Cognitive Psychology, Orthopedics and Sports Medicine, General Medicine, Biophysics}}, publisher = {{Elsevier BV}}, title = {{{Producing deceptive actions in sports: The costs of generating head fakes in basketball}}}, doi = {{10.1016/j.humov.2022.103045}}, volume = {{87}}, year = {{2023}}, } @article{47122, abstract = {{AbstractFeCo alloys are important materials used in pumps and motors in the offshore oil and gas drilling industry. These alloys are subjected to marine environments with a high NaCl concentration, therefore, corrosion and catastrophic failure are anticipated. So, the surface dissolution of additively manufactured FeCo samples is investigated in a quasi-in situ manner, in particular, the pitting corrosion in 5.0 wt pct NaCl solution. The local dissolution of the same sample region is monitored after 24, 72, and 168 hours. Here, the formation of rectangular and circular pits of ultra-fine dimensions (less than 0.5 µm) is observed with increasing immersion time. In addition, the formation of a corrosion-inhibiting surface layer is detected on the sample surface. Surface dissolution leads to a change in the surface structure, however, no change in grain shape or grain size is noticed. The surface topography after local dissolution is correlated to the grain orientation. Quasi-in situ analysis shows the preferential dissolution of high-angle grain boundaries (HAGBs) leading to a change in the fraction of HAGBs and low-angle grain boundaries fraction (LAGBs). For the FeCo sample, a potentiodynamic polarisation test reveals a corrosion potential (Ecorr) of − 0.475 V referred to the standard hydrogen electrode (SHE) and a corrosion exchange current density (icorr) of 0.0848 A/m2. Furthermore, quasi-in situ experiments showed that grains oriented along certain crystallographic directions are corroding more compared to other grains leading to a significant decrease in the local surface height. Grains with a plane normal close to the $$\langle {1}00\rangle$$ ⟨ 100 ⟩ direction reveal lower surface dissolution and higher corrosion resistance, whereas planes normal close to the $$\langle {11}0\rangle$$ ⟨ 110 ⟩ direction and the $$\langle {111}\rangle$$ ⟨ 111 ⟩ direction exhibit a higher surface dissolution.}}, author = {{Pramanik, Sudipta and Krüger, Jan Tobias and Schaper, Mirko and Hoyer, Kay-Peter}}, issn = {{1073-5623}}, journal = {{Metallurgical and Materials Transactions A}}, keywords = {{Metals and Alloys, Mechanics of Materials, Condensed Matter Physics}}, publisher = {{Springer Science and Business Media LLC}}, title = {{{Quasi-In Situ Localized Corrosion of an Additively Manufactured FeCo Alloy in 5 Wt Pct NaCl Solution}}}, doi = {{10.1007/s11661-023-07186-7}}, year = {{2023}}, } @article{43061, abstract = {{Purpose: The aim of this study was to examine whether cortical activity changes during exercise with increasing cognitive demands in preadolescent children. Method: Twenty healthy children (8.75 [0.91] y) performed one movement game, which was conducted with lower and higher cognitive demands. During a baseline measurement and both exercise conditions, cortical activity was recorded using a 64-channel electroencephalographic system, and heart rate was assessed. Ratings of perceived excertion and perceived cognitive engagement were examined after each condition. To analyze power spectral density in the theta, alpha-1, and alpha-2 frequency bands, an adaptive mixture independent component analysis was used to determine the spatiotemporal sources of cortical activity, and brain components were clustered to identify spatial clusters. Results: One-way repeated-measures analyses of variance revealed significant main effects for condition on theta in the prefrontal cluster, on alpha-1 in the prefrontal, central, bilateral motor, bilateral parieto-occipital, and occipital clusters, and on alpha-2 in the left motor, central, and left parieto-occipital clusters. Compared with the lower cognitive demand exercise, cortical activity was significantly higher in theta power in the prefrontal cluster and in alpha-1 power in the occipital cluster during the higher cognitive demand exercise. Conclusion: The present study shows that exercise complexity seems to influence cortical processing as it increased with increasing cognitive demands.}}, author = {{Becker, Linda and Büchel, Daniel and Lehmann, Tim and Kehne, Miriam and Baumeister, Jochen}}, issn = {{0899-8493}}, journal = {{Pediatric Exercise Science}}, keywords = {{Physical Therapy, Sports Therapy and Rehabilitation, Orthopedics and Sports Medicine, Pediatrics, Perinatology and Child Health}}, pages = {{1--11}}, publisher = {{Human Kinetics}}, title = {{{Mobile Electroencephalography Reveals Differences in Cortical Processing During Exercises With Lower and Higher Cognitive Demands in Preadolescent Children}}}, doi = {{10.1123/pes.2021-0212}}, year = {{2023}}, } @inproceedings{46813, abstract = {{Modelling of dynamic systems plays an important role in many engineering disciplines. Two different approaches are physical modelling and data‐driven modelling, both of which have their respective advantages and disadvantages. By combining these two approaches, hybrid models can be created in which the respective disadvantages are mitigated, with discrepancy models being a particular subclass. Here, the basic system behaviour is described physically, that is, in the form of differential equations. Inaccuracies resulting from insufficient modelling or numerics lead to a discrepancy between the measurements and the model, which can be compensated by a data‐driven error correction term. Since discrepancy methods still require a large amount of measurement data, this paper investigates the extent to which a single discrepancy model can be trained for a physical model with additional parameter dependencies without the need for retraining. As an example, a damped electromagnetic oscillating circuit is used. The physical model is realised by a differential equation describing the electric current, considering only inductance and capacitance; dissipation due to resistance is neglected. This creates a discrepancy between measurement and model, which is corrected by a data‐driven model. In the experiments, the inductance and the capacity are varied. It is found that the same data‐driven model can only be used if additional parametric dependencies in the data‐driven term are considered as well.}}, author = {{Wohlleben, Meike Claudia and Muth, Lars and Peitz, Sebastian and Sextro, Walter}}, booktitle = {{Proceedings in Applied Mathematics and Mechanics}}, issn = {{1617-7061}}, keywords = {{Electrical and Electronic Engineering, Atomic and Molecular Physics, and Optics}}, publisher = {{Wiley}}, title = {{{Transferability of a discrepancy model for the dynamics of electromagnetic oscillating circuits}}}, doi = {{10.1002/pamm.202300039}}, year = {{2023}}, } @article{44312, abstract = {{Zusammenfassung Aufgrund aktueller Transformationsprozesse kommt der automatisierten und ressourceneffizienten Fertigung hochfester Leichtbauteile eine steigende Bedeutung zu, beispielsweise im Flugzeug- und Fahrzeugbau. Für kleine Losgrößen bietet sich hier insbesondere das Fertigungsverfahren des Drückwalzens an. Der konventionelle, industriell genutzte Drückwalzprozess stößt allerdings aufgrund der Prozesskomplexität hinsichtlich der Reproduzierbarkeit an seine Grenzen. Dies wird in der Praxis teilweise durch personengebundenes Erfahrungswissen kompensiert. Auch ist es nicht möglich, Bauteileigenschaften definiert einzustellen. Aus diesem Grund bietet der Einsatz einer neuartigen Eigenschaftsregelung Chancen zur Weiterentwicklung des Fertigungsprozesses und die Möglichkeit zur Prozessautomatisierung. Hier werden die Werkzeugbahnen abhängig einer Online-Eigenschaftsmessung über eine zusätzliche Reglerkaskade manipuliert. Die Entwicklung einer solchen Eigenschaftsregelung erfordert den Einsatz geeigneter, modellbasierter Entwurfsmethoden. In diesem Beitrag wird daher ein regelungstechnisches Systemmodell für das Drückwalzen metastabiler austenitischer Edelstähle vorgestellt. Das Simulationsmodell weist aufgrund seiner Echtzeitfähigkeit neben dem Einsatz als reines Entwurfsmodell weitere Nutzungsmöglichkeiten z.B. in Beobachtern auf und grenzt sich somit von domänenspezifischen Simulationstools wie der FEM ab.}}, author = {{Kersting, Lukas and Arian, Bahman and Rozo Vasquez, Julian and Trächtler, Ansgar and Homberg, Werner and Walther, Frank}}, issn = {{0178-2312}}, journal = {{at - Automatisierungstechnik}}, keywords = {{Electrical and Electronic Engineering, Computer Science Applications, Control and Systems Engineering}}, number = {{1}}, pages = {{68--81}}, publisher = {{Walter de Gruyter GmbH}}, title = {{{Echtzeitfähige Modellierung eines innovativen Drückwalzprozesses für die eigenschaftsgeregelte Bauteilfertigung}}}, doi = {{10.1515/auto-2022-0106}}, volume = {{71}}, year = {{2023}}, } @inproceedings{44146, abstract = {{Many Android applications collect data from users. When they do, they must protect this collected data according to the current legal frameworks. Such data protection has become even more important since the European Union rolled out the General Data Protection Regulation (GDPR). App developers have limited tool support to reason about data protection throughout their app development process. Although many Android applications state a privacy policy, privacy policy compliance checks are currently manual, expensive, and prone to error. One of the major challenges in privacy audits is the significant gap between legal privacy statements (in English text) and technical measures that Android apps use to protect their user's privacy. In this thesis, we will explore to what extent we can use static analysis to answer important questions regarding data protection. Our main goal is to design a tool based approach that aids app developers and auditors in ensuring data protection in Android applications, based on automated static program analysis.}}, author = {{Khedkar, Mugdha}}, booktitle = {{2023 IEEE/ACM 45th International Conference on Software Engineering: Companion Proceedings (ICSE-Companion), Melbourne, Australia, 2023, pp. 197-199}}, keywords = {{static analysis, data protection and privacy, GDPR compliance}}, title = {{{Static Analysis for Android GDPR Compliance Assurance}}}, doi = {{10.1109/ICSE-Companion58688.2023.00054}}, year = {{2023}}, } @article{49153, author = {{Görel, Gamze and Franzen, Katja and Hellmich, Frank}}, issn = {{1354-0602}}, journal = {{Teachers and Teaching}}, keywords = {{Arts and Humanities (miscellaneous), Education}}, pages = {{1--14}}, publisher = {{Informa UK Limited}}, title = {{{Primary school teachers’ perspectives on the quality of inclusive education}}}, doi = {{10.1080/13540602.2023.2252347}}, year = {{2023}}, } @article{46494, abstract = {{To improve the mechanical performance and to address current shortcomings of adhesive bonds such as bond degradation due to aging, a pulsed laser surface pretreatment of the metal surfaces of aluminum AW 6082-T6 joints with epoxy adhesive E320 is investigated. The surface treatment of the specimens resulted in increased single-lap shear (SLS) strengths before and after hydrothermal aging in 80°C hot water compared to nonpretreated reference specimens. In order to reveal the correlations of laser parameters, resulting surface morphologies and the SLS strength, differently laser pretreated surfaces were characterized at the micro- and nanoscale using optical and scanning electron microscopies. The surface enlargement was quantified with a digital image analysis of cross-sections prepared from the joint interfaces. An analysis of variances (ANOVA) of the SLS results indicated that the laser parameters power and pulse frequency were most critical for obtaining high SLS strengths. Pretreated joint surfaces with a high micro- and nano-surface enlargement and deep solidification structures provide high SLS strengths of up to 50 MPa and almost negligible aging losses of merely 4%. Undercut structures on the pretreated surfaces were found to be beneficial for the mechanical and aging properties when only limited micro- and nanostructuring was applied.}}, author = {{Freund, Jonathan and Löbbecke, Miriam and Delp, Alexander and Walther, Frank and Wu, Shuang and Tröster, Thomas and Haubrich, Jan}}, issn = {{0021-8464}}, journal = {{The Journal of Adhesion}}, keywords = {{Materials Chemistry, Surfaces, Coatings and Films, Surfaces and Interfaces, Mechanics of Materials, General Chemistry}}, pages = {{1--31}}, publisher = {{Informa UK Limited}}, title = {{{Relationship between laser-generated micro- and nanostructures and the long-term stability of bonded epoxy-aluminum joints}}}, doi = {{10.1080/00218464.2023.2223475}}, year = {{2023}}, } @article{46495, abstract = {{A parameter investigation for manufacturing a hybrid system through the prepreg pressing process was carried out within the scope of this work to achieve optimal adhesion properties. The hybrid specimen comprises an aluminium sheet of alloy EN AW 6082 in T6 condition and a thermoset Carbon Fibre Reinforced Plastics prepreg. The prepreg pressing process allows the curing reaction of epoxy resin and the joining process to occur simultaneously to avoid an additional bonding process step. The surface of the aluminium sheet was pretreated in advance using a pulsed Nd:YAG laser to enhance the bonding properties. In the first step, the shear edge tests investigated the adhesion properties achieved with different consolidation (temperature, time and pressure) and laser parameters. Then, 3-point bending tests were carried out to investigate the influence of the consolidation parameters on the mechanical properties of the Carbon Fibre Reinforced Plastics-laminate. In this way, the optimal parameter sets for manufacturing hybrid structures were determined.}}, author = {{Wu, Shuang and Delp, Alexander and Freund, Jonathan and Walther, Frank and Haubrich, Jan and Löbbecke, Miriam and Tröster, Thomas}}, issn = {{0021-8464}}, journal = {{The Journal of Adhesion}}, keywords = {{Materials Chemistry, Surfaces, Coatings and Films, Surfaces and Interfaces, Mechanics of Materials, General Chemistry}}, pages = {{1--29}}, publisher = {{Informa UK Limited}}, title = {{{Adhesion properties of the hybrid system made of laser-structured aluminium EN AW 6082 and CFRP by co-bonding-pressing process}}}, doi = {{10.1080/00218464.2023.2245758}}, year = {{2023}}, } @article{46486, author = {{Pfeifer, Florian and Knorr, Lukas and Schlosser, Florian and Marten, Thorsten and Tröster, Thomas}}, issn = {{1848-9257}}, journal = {{Journal of Sustainable Development of Energy, Water and Environment Systems}}, keywords = {{Energy Engineering and Power Technology, Water Science and Technology, Environmental Science (miscellaneous), Renewable Energy, Sustainability and the Environment}}, number = {{3}}, pages = {{1--20}}, publisher = {{SDEWES Centre}}, title = {{{Ecological and Economic Feasibility of Inductive Heating for Sustainable Press Hardening Processes}}}, doi = {{10.13044/j.sdewes.d11.0450}}, volume = {{11}}, year = {{2023}}, } @article{48584, abstract = {{The sustainability of the manufacturing industry is of special importance to increase the protection of the environment. The production of fasteners like self-piercing rivets, however, is costly, time-consuming and energy-intensive. The heat treatment and the coating, which are mandatory in conventional self-piercing rivets to achieve adequate strength, ductility and corrosion resistance, are especially crucial in this respect. Within this paper, an approach for an increase in the sustainability in fastener production is presented. The use of alternative, high strain hardening stainless steels as rivet material enables a shortening of the process chain, because post treatment of the rivets after they are formed can be omitted. As the change in rivet material and processing causes some issues along the process chain, the focus of this paper is on the holistic evaluation of the challenges within the forming of high strain hardening steel and the impact of the changed rivet properties on the joining result.}}, author = {{Uhe, Benedikt and Kuball, Clara-Maria and Merklein, Marion and Meschut, Gerson}}, issn = {{2504-4494}}, journal = {{Journal of Manufacturing and Materials Processing}}, keywords = {{Industrial and Manufacturing Engineering, Mechanical Engineering, Mechanics of Materials}}, number = {{6}}, publisher = {{MDPI AG}}, title = {{{Increased Sustainability in Fastener Production with the Example of Self-Piercing Rivets}}}, doi = {{10.3390/jmmp7060193}}, volume = {{7}}, year = {{2023}}, } @article{48603, abstract = {{AbstractToday, a major technological trend is the increasing focus on the person: technical systems personalize, customize, and tailor to the person in both beneficial and troubling ways. This trend has moved beyond the realm of commerce and has become a matter of public governance, where systems for citizen risk scoring, predictive policing, and social credit scores proliferate. What these systems have in common is that they may target the person and her ethical and political dispositions, her virtues. Virtue ethics is the most appropriate approach for evaluating the impacts of these new systems, which has translated in a revival of talk about virtue in technology ethics. Yet, the focus on individual dispositions has rightly been criticized for lacking a concern with the political collective and institutional structures. This paper advocates a new direction of research into civic virtue, which is situated in between personal dispositions and structures of governance. First, it surveys the discourse on virtue ethics of technology, emphasizing its neglect of the political dimension of impacts of emerging technologies. Second, it presents a pluralist conception of civic virtue that enables us to scrutinize the impact of technology on civic virtue on three different levels of reciprocal reputation building, the cultivation of internal goods, and excellence in the public sphere. Third, it illustrates the benefits of this conceptions by discussing some paradigmatic examples of emerging technologies that aim to cultivate civic virtue.}}, author = {{Reijers, Wessel}}, issn = {{2210-5433}}, journal = {{Philosophy & Technology}}, keywords = {{History and Philosophy of Science, Philosophy}}, number = {{4}}, publisher = {{Springer Science and Business Media LLC}}, title = {{{Technology and Civic Virtue}}}, doi = {{10.1007/s13347-023-00669-w}}, volume = {{36}}, year = {{2023}}, } @article{50613, author = {{Hassani, S. and Jakob, K. and Schwab, S. and Hellmich, Frank and Löper, Marwin Felix and Görel, Gamze}}, issn = {{0300-4279}}, journal = {{International Journal of Primary, Elementary and Early Years Education.}}, keywords = {{Life-span and Life-course Studies, Education}}, number = {{8}}, pages = {{1339--1354}}, publisher = {{Informa UK Limited}}, title = {{{Fostering students’ peer relationships through the classroom-based intervention FRIEND-SHIP. Education 3-13}}}, doi = {{10.1080/03004279.2023.2267584}}, volume = {{53}}, year = {{2023}}, } @article{36416, author = {{De, Jianbo and Ma, Xuekai and Yin, Fan and Ren, Jiahuan and Yao, Jiannian and Schumacher, Stefan and Liao, Qing and Fu, Hongbing and Malpuech, Guillaume and Solnyshkov, Dmitry}}, issn = {{0002-7863}}, journal = {{Journal of the American Chemical Society (JACS)}}, keywords = {{Colloid and Surface Chemistry, Biochemistry, General Chemistry, Catalysis}}, number = {{3}}, pages = {{1557--1563}}, publisher = {{American Chemical Society (ACS)}}, title = {{{Room-Temperature Electrical Field-Enhanced Ultrafast Switch in Organic Microcavity Polariton Condensates}}}, doi = {{10.1021/jacs.2c07557}}, volume = {{145}}, year = {{2023}}, } @article{36471, abstract = {{Superconducting nanowire single-photon detectors (SNSPDs) show near unity efficiency, low dark count rate, and short recovery time. Combining these characteristics with temporal control of SNSPDs broadens their applications as in active de-latching for higher dynamic range counting or temporal filtering for pump-probe spectroscopy or LiDAR. To that end, we demonstrate active gating of an SNSPD with a minimum off-to-on rise time of 2.4 ns and a total gate length of 5.0 ns. We show how the rise time depends on the inductance of the detector in combination with the control electronics. The gate window is demonstrated to be fully and freely, electrically tunable up to 500 ns at a repetition rate of 1.0 MHz, as well as ungated, free-running operation. Control electronics to generate the gating are mounted on the 2.3 K stage of a closed-cycle sorption cryostat, while the detector is operated on the cold stage at 0.8 K. We show that the efficiency and timing jitter of the detector is not altered during the on-time of the gating window. We exploit gated operation to demonstrate a method to increase in the photon counting dynamic range by a factor 11.2, as well as temporal filtering of a strong pump in an emulated pump-probe experiment.}}, author = {{Hummel, Thomas and Widhalm, Alex and Höpker, Jan Philipp and Jöns, Klaus and Chang, Jin and Fognini, Andreas and Steinhauer, Stephan and Zwiller, Val and Zrenner, Artur and Bartley, Tim}}, issn = {{1094-4087}}, journal = {{Optics Express}}, keywords = {{Atomic and Molecular Physics, and Optics}}, number = {{1}}, publisher = {{Optica Publishing Group}}, title = {{{Nanosecond gating of superconducting nanowire single-photon detectors using cryogenic bias circuitry}}}, doi = {{10.1364/oe.472058}}, volume = {{31}}, year = {{2023}}, } @article{41035, author = {{Sharapova, Polina R. and Kruk, Sergey S. and Solntsev, Alexander S.}}, issn = {{1863-8880}}, journal = {{Laser & Photonics Reviews}}, keywords = {{Condensed Matter Physics, Atomic and Molecular Physics, and Optics, Electronic, Optical and Magnetic Materials}}, publisher = {{Wiley}}, title = {{{Nonlinear Dielectric Nanoresonators and Metasurfaces: Toward Efficient Generation of Entangled Photons}}}, doi = {{10.1002/lpor.202200408}}, year = {{2023}}, } @article{44081, author = {{Serino, Laura and Gil López, Jano and Stefszky, Michael and Ricken, Raimund and Eigner, Christof and Brecht, Benjamin and Silberhorn, Christine}}, issn = {{2691-3399}}, journal = {{PRX Quantum}}, keywords = {{General Physics and Astronomy, Mathematical Physics, Applied Mathematics, Electronic, Optical and Magnetic Materials, Electrical and Electronic Engineering, General Computer Science}}, number = {{2}}, publisher = {{American Physical Society (APS)}}, title = {{{Realization of a Multi-Output Quantum Pulse Gate for Decoding High-Dimensional Temporal Modes of Single-Photon States}}}, doi = {{10.1103/prxquantum.4.020306}}, volume = {{4}}, year = {{2023}}, } @article{46863, author = {{Schenke, Maximilian and Haucke-Korber, Barnabas and Wallscheid, Oliver}}, issn = {{0885-8993}}, journal = {{IEEE Transactions on Power Electronics}}, keywords = {{Electrical and Electronic Engineering}}, pages = {{1--16}}, publisher = {{Institute of Electrical and Electronics Engineers (IEEE)}}, title = {{{Finite-Set Direct Torque Control via Edge Computing-Assisted Safe Reinforcement Learning for a Permanent Magnet Synchronous Motor}}}, doi = {{10.1109/tpel.2023.3303651}}, year = {{2023}}, } @misc{50233, author = {{Robaszkiewicz, Maria Anna}}, booktitle = {{Arendt Studies}}, issn = {{2574-2329}}, keywords = {{Energy Engineering and Power Technology, Fuel Technology}}, pages = {{247--252}}, publisher = {{Philosophy Documentation Center}}, title = {{{Life, Theory, and Group Identity in Hannah Arendt's Thought, by Karen Fry}}}, doi = {{10.5840/arendtstudies2023756}}, volume = {{7}}, year = {{2023}}, }