---
_id: '46815'
abstract:
- lang: eng
text: In this work, the influence of the filler–matrix adhesion on the tensile properties
of laser-sintered parts built with Polyamide 613 filled with glass beads was investigated.
For this purpose, dry blends of glass beads with and without organosilane coupling
agents and polyamide powder were prepared and processed into tensile specimens
on an EOS P396 laser sintering system. The samples were tested both in the dry
state and after an accelerated conditioning in a climate chamber. Furthermore,
finite element method (FEM) simulations were performed to model the extreme cases
of optimum adhesion and no adhesion. By correlating the tensile tests with the
simulation results and by analyzing the fracture surfaces, it was shown that the
filler–matrix adhesion is sufficient in the dry state but is strongly degraded
by conditioning. Even the presence of various organosilane thin films could not
prevent a strong deterioration of the filler–matrix adhesion and the associated
deterioration of the mechanical properties. Since a comparison with an injection-molded
sample of the same polymer filler combination shows identical behavior after conditioning,
it is assumed that this problem is not limited to additively manufactured parts.
author:
- first_name: Ivo
full_name: Kletetzka, Ivo
id: '50769'
last_name: Kletetzka
- first_name: Maren
full_name: Kosanke, Maren
last_name: Kosanke
- first_name: Dennis
full_name: Meinderink, Dennis
last_name: Meinderink
- first_name: Vanessa
full_name: Neßlinger, Vanessa
last_name: Neßlinger
- first_name: Guido
full_name: Grundmeier, Guido
id: '194'
last_name: Grundmeier
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
orcid: 000-0001-8590-1921
citation:
ama: Kletetzka I, Kosanke M, Meinderink D, Neßlinger V, Grundmeier G, Schmid H-J.
Influence of the filler–matrix adhesion and the effects of conditioning on tensile
properties of laser-sintered parts built with polyamide–glass bead dry blends.
Progress in Additive Manufacturing. Published online 2023. doi:10.1007/s40964-023-00501-z
apa: Kletetzka, I., Kosanke, M., Meinderink, D., Neßlinger, V., Grundmeier, G.,
& Schmid, H.-J. (2023). Influence of the filler–matrix adhesion and the effects
of conditioning on tensile properties of laser-sintered parts built with polyamide–glass
bead dry blends. Progress in Additive Manufacturing. https://doi.org/10.1007/s40964-023-00501-z
bibtex: '@article{Kletetzka_Kosanke_Meinderink_Neßlinger_Grundmeier_Schmid_2023,
title={Influence of the filler–matrix adhesion and the effects of conditioning
on tensile properties of laser-sintered parts built with polyamide–glass bead
dry blends}, DOI={10.1007/s40964-023-00501-z},
journal={Progress in Additive Manufacturing}, publisher={Springer Science and
Business Media LLC}, author={Kletetzka, Ivo and Kosanke, Maren and Meinderink,
Dennis and Neßlinger, Vanessa and Grundmeier, Guido and Schmid, Hans-Joachim},
year={2023} }'
chicago: Kletetzka, Ivo, Maren Kosanke, Dennis Meinderink, Vanessa Neßlinger, Guido
Grundmeier, and Hans-Joachim Schmid. “Influence of the Filler–Matrix Adhesion
and the Effects of Conditioning on Tensile Properties of Laser-Sintered Parts
Built with Polyamide–Glass Bead Dry Blends.” Progress in Additive Manufacturing,
2023. https://doi.org/10.1007/s40964-023-00501-z.
ieee: 'I. Kletetzka, M. Kosanke, D. Meinderink, V. Neßlinger, G. Grundmeier, and
H.-J. Schmid, “Influence of the filler–matrix adhesion and the effects of conditioning
on tensile properties of laser-sintered parts built with polyamide–glass bead
dry blends,” Progress in Additive Manufacturing, 2023, doi: 10.1007/s40964-023-00501-z.'
mla: Kletetzka, Ivo, et al. “Influence of the Filler–Matrix Adhesion and the Effects
of Conditioning on Tensile Properties of Laser-Sintered Parts Built with Polyamide–Glass
Bead Dry Blends.” Progress in Additive Manufacturing, Springer Science
and Business Media LLC, 2023, doi:10.1007/s40964-023-00501-z.
short: I. Kletetzka, M. Kosanke, D. Meinderink, V. Neßlinger, G. Grundmeier, H.-J.
Schmid, Progress in Additive Manufacturing (2023).
date_created: 2023-09-06T06:49:38Z
date_updated: 2023-09-07T11:51:01Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
- _id: '9'
doi: 10.1007/s40964-023-00501-z
keyword:
- Industrial and Manufacturing Engineering
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://rdcu.be/dlqzG
oa: '1'
publication: Progress in Additive Manufacturing
publication_identifier:
issn:
- 2363-9512
- 2363-9520
publication_status: published
publisher: Springer Science and Business Media LLC
quality_controlled: '1'
status: public
title: Influence of the filler–matrix adhesion and the effects of conditioning on
tensile properties of laser-sintered parts built with polyamide–glass bead dry blends
type: journal_article
user_id: '50769'
year: '2023'
...
---
_id: '37466'
abstract:
- lang: eng
text: Typically, head fakes in basketball are generated to, and actually do, deteriorate
performance on the side of the observer. However, potential costs at the side
of the producer of a fake action have only rarely been investigated before. It
is thus not clear yet if the benefit (i.e., slowed reactions in the observer)
of performing a head fake is overestimated due to concurrently arising fake production
costs (i.e., slowed performance in the producer of a head fake). Therefore, we
studied potential head-fake production costs with two experiments. Novice participants
were asked to generate passes to the left or right side, either with or without
head fakes. In Experiment 1, these actions were determined by an auditory stimulus
(i.e., a 440 Hz or 1200 Hz sinus or jigsaw wave). After an interstimulus interval
(ISI) of either 0 ms, 800 ms, or 1500 ms, which served the preparation of the
action, the cued action had to be executed. In Experiment 2, passing to the left
or right, either with or without a head fake, was determined by a visual stimulus
(i.e., a player with a red or blue jersey defending either the right or left side).
After an ISI of either 0 ms, 400 ms, 800 ms, or 1200 ms, the cued action had to
be executed. In both experiments, we observed higher reaction times (RTs) for
passes with head fakes as compared to passes without head fakes for no and an
intermediate preparation interval (from ISI 0 ms to 800 ms), but no difference
for a long preparation interval (for an ISI of 1200 ms and 1500 ms). Both experiments
show that generating fake actions produces performance costs, however, these costs
can be overcome by a longer preparation phase before movement execution.
article_number: '103045'
article_type: original
author:
- first_name: Iris
full_name: Güldenpenning, Iris
id: '52931'
last_name: Güldenpenning
orcid: 0000-0003-0549-5543
- first_name: Matthias
full_name: Weigelt, Matthias
id: '36388'
last_name: Weigelt
- first_name: Nils Tobias
full_name: Böer, Nils Tobias
id: '52000'
last_name: Böer
orcid: 0000-0002-0236-7282
- first_name: Wilfried
full_name: Kunde, Wilfried
last_name: Kunde
citation:
ama: 'Güldenpenning I, Weigelt M, Böer NT, Kunde W. Producing deceptive actions
in sports: The costs of generating head fakes in basketball. Human Movement
Science. 2023;87. doi:10.1016/j.humov.2022.103045'
apa: 'Güldenpenning, I., Weigelt, M., Böer, N. T., & Kunde, W. (2023). Producing
deceptive actions in sports: The costs of generating head fakes in basketball.
Human Movement Science, 87, Article 103045. https://doi.org/10.1016/j.humov.2022.103045'
bibtex: '@article{Güldenpenning_Weigelt_Böer_Kunde_2023, title={Producing deceptive
actions in sports: The costs of generating head fakes in basketball}, volume={87},
DOI={10.1016/j.humov.2022.103045},
number={103045}, journal={Human Movement Science}, publisher={Elsevier BV}, author={Güldenpenning,
Iris and Weigelt, Matthias and Böer, Nils Tobias and Kunde, Wilfried}, year={2023}
}'
chicago: 'Güldenpenning, Iris, Matthias Weigelt, Nils Tobias Böer, and Wilfried
Kunde. “Producing Deceptive Actions in Sports: The Costs of Generating Head Fakes
in Basketball.” Human Movement Science 87 (2023). https://doi.org/10.1016/j.humov.2022.103045.'
ieee: 'I. Güldenpenning, M. Weigelt, N. T. Böer, and W. Kunde, “Producing deceptive
actions in sports: The costs of generating head fakes in basketball,” Human
Movement Science, vol. 87, Art. no. 103045, 2023, doi: 10.1016/j.humov.2022.103045.'
mla: 'Güldenpenning, Iris, et al. “Producing Deceptive Actions in Sports: The Costs
of Generating Head Fakes in Basketball.” Human Movement Science, vol. 87,
103045, Elsevier BV, 2023, doi:10.1016/j.humov.2022.103045.'
short: I. Güldenpenning, M. Weigelt, N.T. Böer, W. Kunde, Human Movement Science
87 (2023).
date_created: 2023-01-18T18:47:16Z
date_updated: 2023-09-12T09:14:38Z
department:
- _id: '266'
- _id: '17'
doi: 10.1016/j.humov.2022.103045
intvolume: ' 87'
keyword:
- Experimental and Cognitive Psychology
- Orthopedics and Sports Medicine
- General Medicine
- Biophysics
language:
- iso: eng
publication: Human Movement Science
publication_identifier:
issn:
- 0167-9457
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: 'Producing deceptive actions in sports: The costs of generating head fakes
in basketball'
type: journal_article
user_id: '80673'
volume: 87
year: '2023'
...
---
_id: '47122'
abstract:
- lang: eng
text: "AbstractFeCo alloys are important materials
used in pumps and motors in the offshore oil and gas drilling industry. These
alloys are subjected to marine environments with a high NaCl concentration, therefore,
corrosion and catastrophic failure are anticipated. So, the surface dissolution
of additively manufactured FeCo samples is investigated in a quasi-in
situ manner, in particular, the pitting corrosion in 5.0 wt pct
NaCl solution. The local dissolution of the same sample region is monitored after
24, 72, and 168 hours. Here, the formation of rectangular and circular pits of
ultra-fine dimensions (less than 0.5 µm) is observed
with increasing immersion time. In addition, the formation of a corrosion-inhibiting
surface layer is detected on the sample surface. Surface dissolution leads to
a change in the surface structure, however, no change in grain shape or grain
size is noticed. The surface topography after local dissolution is correlated
to the grain orientation. Quasi-in situ analysis shows
the preferential dissolution of high-angle grain boundaries (HAGBs) leading to
a change in the fraction of HAGBs and low-angle grain boundaries fraction (LAGBs).
For the FeCo sample, a potentiodynamic polarisation test reveals a corrosion potential
(Ecorr) of − 0.475 V referred to the standard hydrogen electrode
(SHE) and a corrosion exchange current density (icorr) of
0.0848 A/m2. Furthermore, quasi-in situ
experiments showed that grains oriented along certain crystallographic directions
are corroding more compared to other grains leading to a significant decrease
in the local surface height. Grains with a plane normal close to the $$\\langle
{1}00\\rangle$$\r\n
\ \r\n ⟨\r\n 100\r\n
\ ⟩\r\n \r\n
direction reveal lower surface dissolution and higher corrosion resistance, whereas
planes normal close to the $$\\langle
{11}0\\rangle$$\r\n
\ \r\n ⟨\r\n 110\r\n
\ ⟩\r\n \r\n
direction and the $$\\langle
{111}\\rangle$$\r\n
\ \r\n ⟨\r\n 111\r\n
\ ⟩\r\n \r\n
direction exhibit a higher surface dissolution."
author:
- first_name: Sudipta
full_name: Pramanik, Sudipta
last_name: Pramanik
- first_name: Jan Tobias
full_name: Krüger, Jan Tobias
id: '44307'
last_name: Krüger
orcid: 0000-0002-0827-9654
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
citation:
ama: Pramanik S, Krüger JT, Schaper M, Hoyer K-P. Quasi-In Situ Localized Corrosion
of an Additively Manufactured FeCo Alloy in 5 Wt Pct NaCl Solution. Metallurgical
and Materials Transactions A. Published online 2023. doi:10.1007/s11661-023-07186-7
apa: Pramanik, S., Krüger, J. T., Schaper, M., & Hoyer, K.-P. (2023). Quasi-In
Situ Localized Corrosion of an Additively Manufactured FeCo Alloy in 5 Wt Pct
NaCl Solution. Metallurgical and Materials Transactions A. https://doi.org/10.1007/s11661-023-07186-7
bibtex: '@article{Pramanik_Krüger_Schaper_Hoyer_2023, title={Quasi-In Situ Localized
Corrosion of an Additively Manufactured FeCo Alloy in 5 Wt Pct NaCl Solution},
DOI={10.1007/s11661-023-07186-7},
journal={Metallurgical and Materials Transactions A}, publisher={Springer Science
and Business Media LLC}, author={Pramanik, Sudipta and Krüger, Jan Tobias and
Schaper, Mirko and Hoyer, Kay-Peter}, year={2023} }'
chicago: Pramanik, Sudipta, Jan Tobias Krüger, Mirko Schaper, and Kay-Peter Hoyer.
“Quasi-In Situ Localized Corrosion of an Additively Manufactured FeCo Alloy in
5 Wt Pct NaCl Solution.” Metallurgical and Materials Transactions A, 2023.
https://doi.org/10.1007/s11661-023-07186-7.
ieee: 'S. Pramanik, J. T. Krüger, M. Schaper, and K.-P. Hoyer, “Quasi-In Situ Localized
Corrosion of an Additively Manufactured FeCo Alloy in 5 Wt Pct NaCl Solution,”
Metallurgical and Materials Transactions A, 2023, doi: 10.1007/s11661-023-07186-7.'
mla: Pramanik, Sudipta, et al. “Quasi-In Situ Localized Corrosion of an Additively
Manufactured FeCo Alloy in 5 Wt Pct NaCl Solution.” Metallurgical and Materials
Transactions A, Springer Science and Business Media LLC, 2023, doi:10.1007/s11661-023-07186-7.
short: S. Pramanik, J.T. Krüger, M. Schaper, K.-P. Hoyer, Metallurgical and Materials
Transactions A (2023).
date_created: 2023-09-18T11:43:28Z
date_updated: 2023-09-18T11:44:04Z
department:
- _id: '9'
- _id: '158'
doi: 10.1007/s11661-023-07186-7
keyword:
- Metals and Alloys
- Mechanics of Materials
- Condensed Matter Physics
language:
- iso: eng
publication: Metallurgical and Materials Transactions A
publication_identifier:
issn:
- 1073-5623
- 1543-1940
publication_status: published
publisher: Springer Science and Business Media LLC
quality_controlled: '1'
status: public
title: Quasi-In Situ Localized Corrosion of an Additively Manufactured FeCo Alloy
in 5 Wt Pct NaCl Solution
type: journal_article
user_id: '48411'
year: '2023'
...
---
_id: '43061'
abstract:
- lang: eng
text: Purpose: The aim
of this study was to examine whether cortical activity changes during exercise
with increasing cognitive demands in preadolescent children. Method:
Twenty healthy children (8.75 [0.91] y) performed one movement game, which was
conducted with lower and higher cognitive demands. During a baseline measurement
and both exercise conditions, cortical activity was recorded using a 64-channel
electroencephalographic system, and heart rate was assessed. Ratings of perceived
excertion and perceived cognitive engagement were examined after each condition.
To analyze power spectral density in the theta, alpha-1, and alpha-2 frequency
bands, an adaptive mixture independent component analysis was used to determine
the spatiotemporal sources of cortical activity, and brain components were clustered
to identify spatial clusters. Results:
One-way repeated-measures analyses of variance revealed significant main effects
for condition on theta in the prefrontal cluster, on alpha-1 in the prefrontal,
central, bilateral motor, bilateral parieto-occipital, and occipital clusters,
and on alpha-2 in the left motor, central, and left parieto-occipital clusters.
Compared with the lower cognitive demand exercise, cortical activity was significantly
higher in theta power in the prefrontal cluster and in alpha-1 power in the occipital
cluster during the higher cognitive demand exercise. Conclusion:
The present study shows that exercise complexity seems to influence cortical processing
as it increased with increasing cognitive demands.
author:
- first_name: Linda
full_name: Becker, Linda
id: '33708'
last_name: Becker
orcid: 0000-0001-8186-6487
- first_name: Daniel
full_name: Büchel, Daniel
id: '41088'
last_name: Büchel
- first_name: Tim
full_name: Lehmann, Tim
id: '41584'
last_name: Lehmann
- first_name: Miriam
full_name: Kehne, Miriam
id: '129'
last_name: Kehne
- first_name: Jochen
full_name: Baumeister, Jochen
id: '46'
last_name: Baumeister
orcid: 0000-0003-2683-5826
citation:
ama: Becker L, Büchel D, Lehmann T, Kehne M, Baumeister J. Mobile Electroencephalography
Reveals Differences in Cortical Processing During Exercises With Lower and Higher
Cognitive Demands in Preadolescent Children. Pediatric Exercise Science.
Published online 2023:1-11. doi:10.1123/pes.2021-0212
apa: Becker, L., Büchel, D., Lehmann, T., Kehne, M., & Baumeister, J. (2023).
Mobile Electroencephalography Reveals Differences in Cortical Processing During
Exercises With Lower and Higher Cognitive Demands in Preadolescent Children. Pediatric
Exercise Science, 1–11. https://doi.org/10.1123/pes.2021-0212
bibtex: '@article{Becker_Büchel_Lehmann_Kehne_Baumeister_2023, title={Mobile Electroencephalography
Reveals Differences in Cortical Processing During Exercises With Lower and Higher
Cognitive Demands in Preadolescent Children}, DOI={10.1123/pes.2021-0212},
journal={Pediatric Exercise Science}, publisher={Human Kinetics}, author={Becker,
Linda and Büchel, Daniel and Lehmann, Tim and Kehne, Miriam and Baumeister, Jochen},
year={2023}, pages={1–11} }'
chicago: Becker, Linda, Daniel Büchel, Tim Lehmann, Miriam Kehne, and Jochen Baumeister.
“Mobile Electroencephalography Reveals Differences in Cortical Processing During
Exercises With Lower and Higher Cognitive Demands in Preadolescent Children.”
Pediatric Exercise Science, 2023, 1–11. https://doi.org/10.1123/pes.2021-0212.
ieee: 'L. Becker, D. Büchel, T. Lehmann, M. Kehne, and J. Baumeister, “Mobile Electroencephalography
Reveals Differences in Cortical Processing During Exercises With Lower and Higher
Cognitive Demands in Preadolescent Children,” Pediatric Exercise Science,
pp. 1–11, 2023, doi: 10.1123/pes.2021-0212.'
mla: Becker, Linda, et al. “Mobile Electroencephalography Reveals Differences in
Cortical Processing During Exercises With Lower and Higher Cognitive Demands in
Preadolescent Children.” Pediatric Exercise Science, Human Kinetics, 2023,
pp. 1–11, doi:10.1123/pes.2021-0212.
short: L. Becker, D. Büchel, T. Lehmann, M. Kehne, J. Baumeister, Pediatric Exercise
Science (2023) 1–11.
date_created: 2023-03-22T08:48:21Z
date_updated: 2023-09-19T10:09:18Z
department:
- _id: '172'
- _id: '318'
doi: 10.1123/pes.2021-0212
keyword:
- Physical Therapy
- Sports Therapy and Rehabilitation
- Orthopedics and Sports Medicine
- Pediatrics
- Perinatology and Child Health
language:
- iso: eng
page: 1-11
publication: Pediatric Exercise Science
publication_identifier:
issn:
- 0899-8493
- 1543-2920
publication_status: epub_ahead
publisher: Human Kinetics
status: public
title: Mobile Electroencephalography Reveals Differences in Cortical Processing During
Exercises With Lower and Higher Cognitive Demands in Preadolescent Children
type: journal_article
user_id: '14931'
year: '2023'
...
---
_id: '46813'
abstract:
- lang: eng
text: Modelling of dynamic systems plays an important role in many engineering disciplines.
Two different approaches are physical modelling and data‐driven modelling, both
of which have their respective advantages and disadvantages. By combining these
two approaches, hybrid models can be created in which the respective disadvantages
are mitigated, with discrepancy models being a particular subclass. Here, the
basic system behaviour is described physically, that is, in the form of differential
equations. Inaccuracies resulting from insufficient modelling or numerics lead
to a discrepancy between the measurements and the model, which can be compensated
by a data‐driven error correction term. Since discrepancy methods still require
a large amount of measurement data, this paper investigates the extent to which
a single discrepancy model can be trained for a physical model with additional
parameter dependencies without the need for retraining. As an example, a damped
electromagnetic oscillating circuit is used. The physical model is realised by
a differential equation describing the electric current, considering only inductance
and capacitance; dissipation due to resistance is neglected. This creates a discrepancy
between measurement and model, which is corrected by a data‐driven model. In the
experiments, the inductance and the capacity are varied. It is found that the
same data‐driven model can only be used if additional parametric dependencies
in the data‐driven term are considered as well.
author:
- first_name: Meike Claudia
full_name: Wohlleben, Meike Claudia
id: '43991'
last_name: Wohlleben
orcid: 0009-0009-9767-7168
- first_name: Lars
full_name: Muth, Lars
id: '77313'
last_name: Muth
orcid: 0000-0002-2938-5616
- first_name: Sebastian
full_name: Peitz, Sebastian
id: '47427'
last_name: Peitz
orcid: 0000-0002-3389-793X
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
citation:
ama: 'Wohlleben MC, Muth L, Peitz S, Sextro W. Transferability of a discrepancy
model for the dynamics of electromagnetic oscillating circuits. In: Proceedings
in Applied Mathematics and Mechanics. Wiley; 2023. doi:10.1002/pamm.202300039'
apa: Wohlleben, M. C., Muth, L., Peitz, S., & Sextro, W. (2023). Transferability
of a discrepancy model for the dynamics of electromagnetic oscillating circuits.
Proceedings in Applied Mathematics and Mechanics. https://doi.org/10.1002/pamm.202300039
bibtex: '@inproceedings{Wohlleben_Muth_Peitz_Sextro_2023, title={Transferability
of a discrepancy model for the dynamics of electromagnetic oscillating circuits},
DOI={10.1002/pamm.202300039},
booktitle={Proceedings in Applied Mathematics and Mechanics}, publisher={Wiley},
author={Wohlleben, Meike Claudia and Muth, Lars and Peitz, Sebastian and Sextro,
Walter}, year={2023} }'
chicago: Wohlleben, Meike Claudia, Lars Muth, Sebastian Peitz, and Walter Sextro.
“Transferability of a Discrepancy Model for the Dynamics of Electromagnetic Oscillating
Circuits.” In Proceedings in Applied Mathematics and Mechanics. Wiley,
2023. https://doi.org/10.1002/pamm.202300039.
ieee: 'M. C. Wohlleben, L. Muth, S. Peitz, and W. Sextro, “Transferability of a
discrepancy model for the dynamics of electromagnetic oscillating circuits,” 2023,
doi: 10.1002/pamm.202300039.'
mla: Wohlleben, Meike Claudia, et al. “Transferability of a Discrepancy Model for
the Dynamics of Electromagnetic Oscillating Circuits.” Proceedings in Applied
Mathematics and Mechanics, Wiley, 2023, doi:10.1002/pamm.202300039.
short: 'M.C. Wohlleben, L. Muth, S. Peitz, W. Sextro, in: Proceedings in Applied
Mathematics and Mechanics, Wiley, 2023.'
date_created: 2023-09-06T05:18:05Z
date_updated: 2023-09-21T14:47:20Z
department:
- _id: '655'
- _id: '151'
doi: 10.1002/pamm.202300039
keyword:
- Electrical and Electronic Engineering
- Atomic and Molecular Physics
- and Optics
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://onlinelibrary.wiley.com/doi/epdf/10.1002/pamm.202300039
oa: '1'
publication: Proceedings in Applied Mathematics and Mechanics
publication_identifier:
issn:
- 1617-7061
- 1617-7061
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: Transferability of a discrepancy model for the dynamics of electromagnetic
oscillating circuits
type: conference
user_id: '77313'
year: '2023'
...
---
_id: '44312'
abstract:
- lang: eng
text: "Zusammenfassung\r\n Aufgrund
aktueller Transformationsprozesse kommt der automatisierten und ressourceneffizienten
Fertigung hochfester Leichtbauteile eine steigende Bedeutung zu, beispielsweise
im Flugzeug- und Fahrzeugbau. Für kleine Losgrößen bietet sich hier insbesondere
das Fertigungsverfahren des Drückwalzens an. Der konventionelle, industriell genutzte
Drückwalzprozess stößt allerdings aufgrund der Prozesskomplexität hinsichtlich
der Reproduzierbarkeit an seine Grenzen. Dies wird in der Praxis teilweise durch
personengebundenes Erfahrungswissen kompensiert. Auch ist es nicht möglich, Bauteileigenschaften
definiert einzustellen. Aus diesem Grund bietet der Einsatz einer neuartigen Eigenschaftsregelung
Chancen zur Weiterentwicklung des Fertigungsprozesses und die Möglichkeit zur
Prozessautomatisierung. Hier werden die Werkzeugbahnen abhängig einer Online-Eigenschaftsmessung
über eine zusätzliche Reglerkaskade manipuliert. Die Entwicklung einer solchen
Eigenschaftsregelung erfordert den Einsatz geeigneter, modellbasierter Entwurfsmethoden.
In diesem Beitrag wird daher ein regelungstechnisches Systemmodell für das Drückwalzen
metastabiler austenitischer Edelstähle vorgestellt. Das Simulationsmodell weist
aufgrund seiner Echtzeitfähigkeit neben dem Einsatz als reines Entwurfsmodell
weitere Nutzungsmöglichkeiten z.B. in Beobachtern auf und grenzt sich somit von
domänenspezifischen Simulationstools wie der FEM ab."
author:
- first_name: Lukas
full_name: Kersting, Lukas
last_name: Kersting
- first_name: Bahman
full_name: Arian, Bahman
id: '36287'
last_name: Arian
- first_name: Julian
full_name: Rozo Vasquez, Julian
last_name: Rozo Vasquez
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
- first_name: Frank
full_name: Walther, Frank
last_name: Walther
citation:
ama: Kersting L, Arian B, Rozo Vasquez J, Trächtler A, Homberg W, Walther F. Echtzeitfähige
Modellierung eines innovativen Drückwalzprozesses für die eigenschaftsgeregelte
Bauteilfertigung. at - Automatisierungstechnik. 2023;71(1):68-81. doi:10.1515/auto-2022-0106
apa: Kersting, L., Arian, B., Rozo Vasquez, J., Trächtler, A., Homberg, W., &
Walther, F. (2023). Echtzeitfähige Modellierung eines innovativen Drückwalzprozesses
für die eigenschaftsgeregelte Bauteilfertigung. At - Automatisierungstechnik,
71(1), 68–81. https://doi.org/10.1515/auto-2022-0106
bibtex: '@article{Kersting_Arian_Rozo Vasquez_Trächtler_Homberg_Walther_2023, title={Echtzeitfähige
Modellierung eines innovativen Drückwalzprozesses für die eigenschaftsgeregelte
Bauteilfertigung}, volume={71}, DOI={10.1515/auto-2022-0106},
number={1}, journal={at - Automatisierungstechnik}, publisher={Walter de Gruyter
GmbH}, author={Kersting, Lukas and Arian, Bahman and Rozo Vasquez, Julian and
Trächtler, Ansgar and Homberg, Werner and Walther, Frank}, year={2023}, pages={68–81}
}'
chicago: 'Kersting, Lukas, Bahman Arian, Julian Rozo Vasquez, Ansgar Trächtler,
Werner Homberg, and Frank Walther. “Echtzeitfähige Modellierung Eines Innovativen
Drückwalzprozesses Für Die Eigenschaftsgeregelte Bauteilfertigung.” At - Automatisierungstechnik
71, no. 1 (2023): 68–81. https://doi.org/10.1515/auto-2022-0106.'
ieee: 'L. Kersting, B. Arian, J. Rozo Vasquez, A. Trächtler, W. Homberg, and F.
Walther, “Echtzeitfähige Modellierung eines innovativen Drückwalzprozesses für
die eigenschaftsgeregelte Bauteilfertigung,” at - Automatisierungstechnik,
vol. 71, no. 1, pp. 68–81, 2023, doi: 10.1515/auto-2022-0106.'
mla: Kersting, Lukas, et al. “Echtzeitfähige Modellierung Eines Innovativen Drückwalzprozesses
Für Die Eigenschaftsgeregelte Bauteilfertigung.” At - Automatisierungstechnik,
vol. 71, no. 1, Walter de Gruyter GmbH, 2023, pp. 68–81, doi:10.1515/auto-2022-0106.
short: L. Kersting, B. Arian, J. Rozo Vasquez, A. Trächtler, W. Homberg, F. Walther,
At - Automatisierungstechnik 71 (2023) 68–81.
date_created: 2023-05-02T09:35:01Z
date_updated: 2023-09-25T10:08:25Z
department:
- _id: '156'
- _id: '241'
- _id: '153'
doi: 10.1515/auto-2022-0106
intvolume: ' 71'
issue: '1'
keyword:
- Electrical and Electronic Engineering
- Computer Science Applications
- Control and Systems Engineering
language:
- iso: eng
page: 68-81
publication: at - Automatisierungstechnik
publication_identifier:
issn:
- 0178-2312
- 2196-677X
publication_status: published
publisher: Walter de Gruyter GmbH
quality_controlled: '1'
status: public
title: Echtzeitfähige Modellierung eines innovativen Drückwalzprozesses für die eigenschaftsgeregelte
Bauteilfertigung
type: journal_article
user_id: '552'
volume: 71
year: '2023'
...
---
_id: '44146'
abstract:
- lang: eng
text: "Many Android applications collect data from users. When they do, they must\r\nprotect
this collected data according to the current legal frameworks. Such\r\ndata protection
has become even more important since the European Union rolled\r\nout the General
Data Protection Regulation (GDPR). App developers have limited\r\ntool support
to reason about data protection throughout their app development\r\nprocess. Although
many Android applications state a privacy policy, privacy\r\npolicy compliance
checks are currently manual, expensive, and prone to error.\r\nOne of the major
challenges in privacy audits is the significant gap between\r\nlegal privacy statements
(in English text) and technical measures that Android\r\napps use to protect their
user's privacy. In this thesis, we will explore to\r\nwhat extent we can use static
analysis to answer important questions regarding\r\ndata protection. Our main
goal is to design a tool based approach that aids app\r\ndevelopers and auditors
in ensuring data protection in Android applications,\r\nbased on automated static
program analysis."
author:
- first_name: Mugdha
full_name: Khedkar, Mugdha
id: '88024'
last_name: Khedkar
citation:
ama: 'Khedkar M. Static Analysis for Android GDPR Compliance Assurance. In: 2023
IEEE/ACM 45th International Conference on Software Engineering: Companion Proceedings
(ICSE-Companion), Melbourne, Australia, 2023, Pp. 197-199. doi:10.1109/ICSE-Companion58688.2023.00054'
apa: 'Khedkar, M. (n.d.). Static Analysis for Android GDPR Compliance Assurance.
2023 IEEE/ACM 45th International Conference on Software Engineering: Companion
Proceedings (ICSE-Companion), Melbourne, Australia, 2023, Pp. 197-199. https://doi.org/10.1109/ICSE-Companion58688.2023.00054'
bibtex: '@inproceedings{Khedkar, title={Static Analysis for Android GDPR Compliance
Assurance}, DOI={10.1109/ICSE-Companion58688.2023.00054},
booktitle={2023 IEEE/ACM 45th International Conference on Software Engineering:
Companion Proceedings (ICSE-Companion), Melbourne, Australia, 2023, pp. 197-199},
author={Khedkar, Mugdha} }'
chicago: 'Khedkar, Mugdha. “Static Analysis for Android GDPR Compliance Assurance.”
In 2023 IEEE/ACM 45th International Conference on Software Engineering: Companion
Proceedings (ICSE-Companion), Melbourne, Australia, 2023, Pp. 197-199, n.d.
https://doi.org/10.1109/ICSE-Companion58688.2023.00054.'
ieee: 'M. Khedkar, “Static Analysis for Android GDPR Compliance Assurance,” doi:
10.1109/ICSE-Companion58688.2023.00054.'
mla: 'Khedkar, Mugdha. “Static Analysis for Android GDPR Compliance Assurance.”
2023 IEEE/ACM 45th International Conference on Software Engineering: Companion
Proceedings (ICSE-Companion), Melbourne, Australia, 2023, Pp. 197-199, doi:10.1109/ICSE-Companion58688.2023.00054.'
short: 'M. Khedkar, in: 2023 IEEE/ACM 45th International Conference on Software
Engineering: Companion Proceedings (ICSE-Companion), Melbourne, Australia, 2023,
Pp. 197-199, n.d.'
date_created: 2023-04-24T12:14:17Z
date_updated: 2024-09-16T08:46:25Z
ddc:
- '004'
department:
- _id: '76'
doi: 10.1109/ICSE-Companion58688.2023.00054
external_id:
arxiv:
- '2303.09606'
file:
- access_level: closed
content_type: application/pdf
creator: khedkarm
date_created: 2023-04-24T12:15:27Z
date_updated: 2023-04-24T12:15:27Z
file_id: '44147'
file_name: 2023047614.pdf
file_size: 85313
relation: main_file
success: 1
file_date_updated: 2023-04-24T12:15:27Z
has_accepted_license: '1'
keyword:
- static analysis
- data protection and privacy
- GDPR compliance
language:
- iso: eng
publication: '2023 IEEE/ACM 45th International Conference on Software Engineering:
Companion Proceedings (ICSE-Companion), Melbourne, Australia, 2023, pp. 197-199'
publication_status: accepted
status: public
title: Static Analysis for Android GDPR Compliance Assurance
type: conference
user_id: '88024'
year: '2023'
...
---
_id: '49153'
author:
- first_name: Gamze
full_name: Görel, Gamze
id: '13345'
last_name: Görel
- first_name: Katja
full_name: Franzen, Katja
id: '75124'
last_name: Franzen
- first_name: Frank
full_name: Hellmich, Frank
id: '26282'
last_name: Hellmich
citation:
ama: Görel G, Franzen K, Hellmich F. Primary school teachers’ perspectives on the
quality of inclusive education. Teachers and Teaching. Published online
2023:1-14. doi:10.1080/13540602.2023.2252347
apa: Görel, G., Franzen, K., & Hellmich, F. (2023). Primary school teachers’
perspectives on the quality of inclusive education. Teachers and Teaching,
1–14. https://doi.org/10.1080/13540602.2023.2252347
bibtex: '@article{Görel_Franzen_Hellmich_2023, title={Primary school teachers’ perspectives
on the quality of inclusive education}, DOI={10.1080/13540602.2023.2252347},
journal={Teachers and Teaching}, publisher={Informa UK Limited}, author={Görel,
Gamze and Franzen, Katja and Hellmich, Frank}, year={2023}, pages={1–14} }'
chicago: Görel, Gamze, Katja Franzen, and Frank Hellmich. “Primary School Teachers’
Perspectives on the Quality of Inclusive Education.” Teachers and Teaching,
2023, 1–14. https://doi.org/10.1080/13540602.2023.2252347.
ieee: 'G. Görel, K. Franzen, and F. Hellmich, “Primary school teachers’ perspectives
on the quality of inclusive education,” Teachers and Teaching, pp. 1–14,
2023, doi: 10.1080/13540602.2023.2252347.'
mla: Görel, Gamze, et al. “Primary School Teachers’ Perspectives on the Quality
of Inclusive Education.” Teachers and Teaching, Informa UK Limited, 2023,
pp. 1–14, doi:10.1080/13540602.2023.2252347.
short: G. Görel, K. Franzen, F. Hellmich, Teachers and Teaching (2023) 1–14.
date_created: 2023-11-23T10:38:19Z
date_updated: 2024-10-06T20:10:15Z
doi: 10.1080/13540602.2023.2252347
keyword:
- Arts and Humanities (miscellaneous)
- Education
language:
- iso: eng
page: 1-14
publication: Teachers and Teaching
publication_identifier:
issn:
- 1354-0602
- 1470-1278
publication_status: published
publisher: Informa UK Limited
status: public
title: Primary school teachers’ perspectives on the quality of inclusive education
type: journal_article
user_id: '57672'
year: '2023'
...
---
_id: '46494'
abstract:
- lang: eng
text: To improve the mechanical performance and to address current shortcomings
of adhesive bonds such as bond degradation due to aging, a pulsed laser surface
pretreatment of the metal surfaces of aluminum AW 6082-T6 joints with epoxy adhesive
E320 is investigated. The surface treatment of the specimens resulted in increased
single-lap shear (SLS) strengths before and after hydrothermal aging in 80°C hot
water compared to nonpretreated reference specimens. In order to reveal the correlations
of laser parameters, resulting surface morphologies and the SLS strength, differently
laser pretreated surfaces were characterized at the micro- and nanoscale using
optical and scanning electron microscopies. The surface enlargement was quantified
with a digital image analysis of cross-sections prepared from the joint interfaces.
An analysis of variances (ANOVA) of the SLS results indicated that the laser parameters
power and pulse frequency were most critical for obtaining high SLS strengths.
Pretreated joint surfaces with a high micro- and nano-surface enlargement and
deep solidification structures provide high SLS strengths of up to 50 MPa and
almost negligible aging losses of merely 4%. Undercut structures on the pretreated
surfaces were found to be beneficial for the mechanical and aging properties when
only limited micro- and nanostructuring was applied.
article_type: original
author:
- first_name: Jonathan
full_name: Freund, Jonathan
last_name: Freund
- first_name: Miriam
full_name: Löbbecke, Miriam
last_name: Löbbecke
- first_name: Alexander
full_name: Delp, Alexander
last_name: Delp
- first_name: Frank
full_name: Walther, Frank
last_name: Walther
- first_name: Shuang
full_name: Wu, Shuang
id: '48039'
last_name: Wu
orcid: 0000-0001-8645-9952
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Jan
full_name: Haubrich, Jan
last_name: Haubrich
citation:
ama: Freund J, Löbbecke M, Delp A, et al. Relationship between laser-generated micro-
and nanostructures and the long-term stability of bonded epoxy-aluminum joints.
The Journal of Adhesion. Published online 2023:1-31. doi:10.1080/00218464.2023.2223475
apa: Freund, J., Löbbecke, M., Delp, A., Walther, F., Wu, S., Tröster, T., &
Haubrich, J. (2023). Relationship between laser-generated micro- and nanostructures
and the long-term stability of bonded epoxy-aluminum joints. The Journal of
Adhesion, 1–31. https://doi.org/10.1080/00218464.2023.2223475
bibtex: '@article{Freund_Löbbecke_Delp_Walther_Wu_Tröster_Haubrich_2023, title={Relationship
between laser-generated micro- and nanostructures and the long-term stability
of bonded epoxy-aluminum joints}, DOI={10.1080/00218464.2023.2223475},
journal={The Journal of Adhesion}, publisher={Informa UK Limited}, author={Freund,
Jonathan and Löbbecke, Miriam and Delp, Alexander and Walther, Frank and Wu, Shuang
and Tröster, Thomas and Haubrich, Jan}, year={2023}, pages={1–31} }'
chicago: Freund, Jonathan, Miriam Löbbecke, Alexander Delp, Frank Walther, Shuang
Wu, Thomas Tröster, and Jan Haubrich. “Relationship between Laser-Generated Micro-
and Nanostructures and the Long-Term Stability of Bonded Epoxy-Aluminum Joints.”
The Journal of Adhesion, 2023, 1–31. https://doi.org/10.1080/00218464.2023.2223475.
ieee: 'J. Freund et al., “Relationship between laser-generated micro- and
nanostructures and the long-term stability of bonded epoxy-aluminum joints,” The
Journal of Adhesion, pp. 1–31, 2023, doi: 10.1080/00218464.2023.2223475.'
mla: Freund, Jonathan, et al. “Relationship between Laser-Generated Micro- and Nanostructures
and the Long-Term Stability of Bonded Epoxy-Aluminum Joints.” The Journal of
Adhesion, Informa UK Limited, 2023, pp. 1–31, doi:10.1080/00218464.2023.2223475.
short: J. Freund, M. Löbbecke, A. Delp, F. Walther, S. Wu, T. Tröster, J. Haubrich,
The Journal of Adhesion (2023) 1–31.
date_created: 2023-08-15T10:22:38Z
date_updated: 2025-01-30T12:35:30Z
department:
- _id: '321'
- _id: '149'
- _id: '9'
doi: 10.1080/00218464.2023.2223475
keyword:
- Materials Chemistry
- Surfaces
- Coatings and Films
- Surfaces and Interfaces
- Mechanics of Materials
- General Chemistry
language:
- iso: eng
page: 1-31
publication: The Journal of Adhesion
publication_identifier:
issn:
- 0021-8464
- 1545-5823
publication_status: published
publisher: Informa UK Limited
quality_controlled: '1'
status: public
title: Relationship between laser-generated micro- and nanostructures and the long-term
stability of bonded epoxy-aluminum joints
type: journal_article
user_id: '48039'
year: '2023'
...
---
_id: '46495'
abstract:
- lang: eng
text: A parameter investigation for manufacturing a hybrid system through the prepreg
pressing process was carried out within the scope of this work to achieve optimal
adhesion properties. The hybrid specimen comprises an aluminium sheet of alloy
EN AW 6082 in T6 condition and a thermoset Carbon Fibre Reinforced Plastics prepreg.
The prepreg pressing process allows the curing reaction of epoxy resin and the
joining process to occur simultaneously to avoid an additional bonding process
step. The surface of the aluminium sheet was pretreated in advance using a pulsed
Nd:YAG laser to enhance the bonding properties. In the first step, the shear edge
tests investigated the adhesion properties achieved with different consolidation
(temperature, time and pressure) and laser parameters. Then, 3-point bending tests
were carried out to investigate the influence of the consolidation parameters
on the mechanical properties of the Carbon Fibre Reinforced Plastics-laminate.
In this way, the optimal parameter sets for manufacturing hybrid structures were
determined.
article_type: original
author:
- first_name: Shuang
full_name: Wu, Shuang
id: '48039'
last_name: Wu
orcid: 0000-0001-8645-9952
- first_name: Alexander
full_name: Delp, Alexander
last_name: Delp
- first_name: Jonathan
full_name: Freund, Jonathan
last_name: Freund
- first_name: Frank
full_name: Walther, Frank
last_name: Walther
- first_name: Jan
full_name: Haubrich, Jan
last_name: Haubrich
- first_name: Miriam
full_name: Löbbecke, Miriam
last_name: Löbbecke
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: Wu S, Delp A, Freund J, et al. Adhesion properties of the hybrid system made
of laser-structured aluminium EN AW 6082 and CFRP by co-bonding-pressing process.
The Journal of Adhesion. Published online 2023:1-29. doi:10.1080/00218464.2023.2245758
apa: Wu, S., Delp, A., Freund, J., Walther, F., Haubrich, J., Löbbecke, M., &
Tröster, T. (2023). Adhesion properties of the hybrid system made of laser-structured
aluminium EN AW 6082 and CFRP by co-bonding-pressing process. The Journal of
Adhesion, 1–29. https://doi.org/10.1080/00218464.2023.2245758
bibtex: '@article{Wu_Delp_Freund_Walther_Haubrich_Löbbecke_Tröster_2023, title={Adhesion
properties of the hybrid system made of laser-structured aluminium EN AW 6082
and CFRP by co-bonding-pressing process}, DOI={10.1080/00218464.2023.2245758},
journal={The Journal of Adhesion}, publisher={Informa UK Limited}, author={Wu,
Shuang and Delp, Alexander and Freund, Jonathan and Walther, Frank and Haubrich,
Jan and Löbbecke, Miriam and Tröster, Thomas}, year={2023}, pages={1–29} }'
chicago: Wu, Shuang, Alexander Delp, Jonathan Freund, Frank Walther, Jan Haubrich,
Miriam Löbbecke, and Thomas Tröster. “Adhesion Properties of the Hybrid System
Made of Laser-Structured Aluminium EN AW 6082 and CFRP by Co-Bonding-Pressing
Process.” The Journal of Adhesion, 2023, 1–29. https://doi.org/10.1080/00218464.2023.2245758.
ieee: 'S. Wu et al., “Adhesion properties of the hybrid system made of laser-structured
aluminium EN AW 6082 and CFRP by co-bonding-pressing process,” The Journal
of Adhesion, pp. 1–29, 2023, doi: 10.1080/00218464.2023.2245758.'
mla: Wu, Shuang, et al. “Adhesion Properties of the Hybrid System Made of Laser-Structured
Aluminium EN AW 6082 and CFRP by Co-Bonding-Pressing Process.” The Journal
of Adhesion, Informa UK Limited, 2023, pp. 1–29, doi:10.1080/00218464.2023.2245758.
short: S. Wu, A. Delp, J. Freund, F. Walther, J. Haubrich, M. Löbbecke, T. Tröster,
The Journal of Adhesion (2023) 1–29.
date_created: 2023-08-15T10:26:00Z
date_updated: 2025-01-30T12:33:42Z
department:
- _id: '321'
- _id: '149'
- _id: '9'
doi: 10.1080/00218464.2023.2245758
keyword:
- Materials Chemistry
- Surfaces
- Coatings and Films
- Surfaces and Interfaces
- Mechanics of Materials
- General Chemistry
language:
- iso: eng
page: 1-29
publication: The Journal of Adhesion
publication_identifier:
issn:
- 0021-8464
- 1545-5823
publication_status: published
publisher: Informa UK Limited
quality_controlled: '1'
status: public
title: Adhesion properties of the hybrid system made of laser-structured aluminium
EN AW 6082 and CFRP by co-bonding-pressing process
type: journal_article
user_id: '48039'
year: '2023'
...
---
_id: '46486'
author:
- first_name: Florian
full_name: Pfeifer, Florian
id: '22717'
last_name: Pfeifer
- first_name: Lukas
full_name: Knorr, Lukas
id: '90391'
last_name: Knorr
- first_name: Florian
full_name: Schlosser, Florian
id: '88614'
last_name: Schlosser
- first_name: Thorsten
full_name: Marten, Thorsten
id: '338'
last_name: Marten
orcid: 0009-0001-6433-7839
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: Pfeifer F, Knorr L, Schlosser F, Marten T, Tröster T. Ecological and Economic
Feasibility of Inductive Heating for Sustainable Press Hardening Processes. Journal
of Sustainable Development of Energy, Water and Environment Systems. 2023;11(3):1-20.
doi:10.13044/j.sdewes.d11.0450
apa: Pfeifer, F., Knorr, L., Schlosser, F., Marten, T., & Tröster, T. (2023).
Ecological and Economic Feasibility of Inductive Heating for Sustainable Press
Hardening Processes. Journal of Sustainable Development of Energy, Water and
Environment Systems, 11(3), 1–20. https://doi.org/10.13044/j.sdewes.d11.0450
bibtex: '@article{Pfeifer_Knorr_Schlosser_Marten_Tröster_2023, title={Ecological
and Economic Feasibility of Inductive Heating for Sustainable Press Hardening
Processes}, volume={11}, DOI={10.13044/j.sdewes.d11.0450},
number={3}, journal={Journal of Sustainable Development of Energy, Water and Environment
Systems}, publisher={SDEWES Centre}, author={Pfeifer, Florian and Knorr, Lukas
and Schlosser, Florian and Marten, Thorsten and Tröster, Thomas}, year={2023},
pages={1–20} }'
chicago: 'Pfeifer, Florian, Lukas Knorr, Florian Schlosser, Thorsten Marten, and
Thomas Tröster. “Ecological and Economic Feasibility of Inductive Heating for
Sustainable Press Hardening Processes.” Journal of Sustainable Development
of Energy, Water and Environment Systems 11, no. 3 (2023): 1–20. https://doi.org/10.13044/j.sdewes.d11.0450.'
ieee: 'F. Pfeifer, L. Knorr, F. Schlosser, T. Marten, and T. Tröster, “Ecological
and Economic Feasibility of Inductive Heating for Sustainable Press Hardening
Processes,” Journal of Sustainable Development of Energy, Water and Environment
Systems, vol. 11, no. 3, pp. 1–20, 2023, doi: 10.13044/j.sdewes.d11.0450.'
mla: Pfeifer, Florian, et al. “Ecological and Economic Feasibility of Inductive
Heating for Sustainable Press Hardening Processes.” Journal of Sustainable
Development of Energy, Water and Environment Systems, vol. 11, no. 3, SDEWES
Centre, 2023, pp. 1–20, doi:10.13044/j.sdewes.d11.0450.
short: F. Pfeifer, L. Knorr, F. Schlosser, T. Marten, T. Tröster, Journal of Sustainable
Development of Energy, Water and Environment Systems 11 (2023) 1–20.
date_created: 2023-08-14T15:25:01Z
date_updated: 2025-06-06T08:20:26Z
department:
- _id: '9'
- _id: '149'
- _id: '321'
doi: 10.13044/j.sdewes.d11.0450
intvolume: ' 11'
issue: '3'
keyword:
- Energy Engineering and Power Technology
- Water Science and Technology
- Environmental Science (miscellaneous)
- Renewable Energy
- Sustainability and the Environment
language:
- iso: eng
page: 1-20
publication: Journal of Sustainable Development of Energy, Water and Environment Systems
publication_identifier:
issn:
- 1848-9257
publication_status: published
publisher: SDEWES Centre
status: public
title: Ecological and Economic Feasibility of Inductive Heating for Sustainable Press
Hardening Processes
type: journal_article
user_id: '15952'
volume: 11
year: '2023'
...
---
_id: '48584'
abstract:
- lang: eng
text: The sustainability of the manufacturing industry is of special importance
to increase the protection of the environment. The production of fasteners like
self-piercing rivets, however, is costly, time-consuming and energy-intensive.
The heat treatment and the coating, which are mandatory in conventional self-piercing
rivets to achieve adequate strength, ductility and corrosion resistance, are especially
crucial in this respect. Within this paper, an approach for an increase in the
sustainability in fastener production is presented. The use of alternative, high
strain hardening stainless steels as rivet material enables a shortening of the
process chain, because post treatment of the rivets after they are formed can
be omitted. As the change in rivet material and processing causes some issues
along the process chain, the focus of this paper is on the holistic evaluation
of the challenges within the forming of high strain hardening steel and the impact
of the changed rivet properties on the joining result.
article_number: '193'
author:
- first_name: Benedikt
full_name: Uhe, Benedikt
id: '38131'
last_name: Uhe
- first_name: Clara-Maria
full_name: Kuball, Clara-Maria
last_name: Kuball
- first_name: Marion
full_name: Merklein, Marion
last_name: Merklein
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: Uhe B, Kuball C-M, Merklein M, Meschut G. Increased Sustainability in Fastener
Production with the Example of Self-Piercing Rivets. Journal of Manufacturing
and Materials Processing. 2023;7(6). doi:10.3390/jmmp7060193
apa: Uhe, B., Kuball, C.-M., Merklein, M., & Meschut, G. (2023). Increased Sustainability
in Fastener Production with the Example of Self-Piercing Rivets. Journal of
Manufacturing and Materials Processing, 7(6), Article 193. https://doi.org/10.3390/jmmp7060193
bibtex: '@article{Uhe_Kuball_Merklein_Meschut_2023, title={Increased Sustainability
in Fastener Production with the Example of Self-Piercing Rivets}, volume={7},
DOI={10.3390/jmmp7060193}, number={6193},
journal={Journal of Manufacturing and Materials Processing}, publisher={MDPI AG},
author={Uhe, Benedikt and Kuball, Clara-Maria and Merklein, Marion and Meschut,
Gerson}, year={2023} }'
chicago: Uhe, Benedikt, Clara-Maria Kuball, Marion Merklein, and Gerson Meschut.
“Increased Sustainability in Fastener Production with the Example of Self-Piercing
Rivets.” Journal of Manufacturing and Materials Processing 7, no. 6 (2023).
https://doi.org/10.3390/jmmp7060193.
ieee: 'B. Uhe, C.-M. Kuball, M. Merklein, and G. Meschut, “Increased Sustainability
in Fastener Production with the Example of Self-Piercing Rivets,” Journal of
Manufacturing and Materials Processing, vol. 7, no. 6, Art. no. 193, 2023,
doi: 10.3390/jmmp7060193.'
mla: Uhe, Benedikt, et al. “Increased Sustainability in Fastener Production with
the Example of Self-Piercing Rivets.” Journal of Manufacturing and Materials
Processing, vol. 7, no. 6, 193, MDPI AG, 2023, doi:10.3390/jmmp7060193.
short: B. Uhe, C.-M. Kuball, M. Merklein, G. Meschut, Journal of Manufacturing and
Materials Processing 7 (2023).
date_created: 2023-11-02T07:58:35Z
date_updated: 2026-02-27T10:16:17Z
department:
- _id: '157'
doi: 10.3390/jmmp7060193
intvolume: ' 7'
issue: '6'
keyword:
- Industrial and Manufacturing Engineering
- Mechanical Engineering
- Mechanics of Materials
language:
- iso: eng
publication: Journal of Manufacturing and Materials Processing
publication_identifier:
issn:
- 2504-4494
publication_status: published
publisher: MDPI AG
quality_controlled: '1'
status: public
title: Increased Sustainability in Fastener Production with the Example of Self-Piercing
Rivets
type: journal_article
user_id: '38131'
volume: 7
year: '2023'
...
---
_id: '48603'
abstract:
- lang: eng
text: 'AbstractToday, a major technological trend
is the increasing focus on the person: technical systems personalize, customize,
and tailor to the person in both beneficial and troubling ways. This trend has
moved beyond the realm of commerce and has become a matter of public governance,
where systems for citizen risk scoring, predictive policing, and social credit
scores proliferate. What these systems have in common is that they may target
the person and her ethical and political dispositions, her virtues. Virtue ethics
is the most appropriate approach for evaluating the impacts of these new systems,
which has translated in a revival of talk about virtue in technology ethics. Yet,
the focus on individual dispositions has rightly been criticized for lacking a
concern with the political collective and institutional structures. This paper
advocates a new direction of research into civic virtue, which is situated in
between personal dispositions and structures of governance. First, it surveys
the discourse on virtue ethics of technology, emphasizing its neglect of the political
dimension of impacts of emerging technologies. Second, it presents a pluralist
conception of civic virtue that enables us to scrutinize the impact of technology
on civic virtue on three different levels of reciprocal reputation building, the
cultivation of internal goods, and excellence in the public sphere. Third, it
illustrates the benefits of this conceptions by discussing some paradigmatic examples
of emerging technologies that aim to cultivate civic virtue.'
article_number: '71'
article_type: original
author:
- first_name: Wessel
full_name: Reijers, Wessel
id: '102524'
last_name: Reijers
orcid: 0000-0003-2505-1587
citation:
ama: Reijers W. Technology and Civic Virtue. Philosophy & Technology.
2023;36(4). doi:10.1007/s13347-023-00669-w
apa: Reijers, W. (2023). Technology and Civic Virtue. Philosophy & Technology,
36(4), Article 71. https://doi.org/10.1007/s13347-023-00669-w
bibtex: '@article{Reijers_2023, title={Technology and Civic Virtue}, volume={36},
DOI={10.1007/s13347-023-00669-w},
number={471}, journal={Philosophy & Technology}, publisher={Springer Science
and Business Media LLC}, author={Reijers, Wessel}, year={2023} }'
chicago: Reijers, Wessel. “Technology and Civic Virtue.” Philosophy & Technology
36, no. 4 (2023). https://doi.org/10.1007/s13347-023-00669-w.
ieee: 'W. Reijers, “Technology and Civic Virtue,” Philosophy & Technology,
vol. 36, no. 4, Art. no. 71, 2023, doi: 10.1007/s13347-023-00669-w.'
mla: Reijers, Wessel. “Technology and Civic Virtue.” Philosophy & Technology,
vol. 36, no. 4, 71, Springer Science and Business Media LLC, 2023, doi:10.1007/s13347-023-00669-w.
short: W. Reijers, Philosophy & Technology 36 (2023).
date_created: 2023-11-03T13:36:40Z
date_updated: 2025-09-22T10:03:57Z
department:
- _id: '11'
doi: 10.1007/s13347-023-00669-w
intvolume: ' 36'
issue: '4'
keyword:
- History and Philosophy of Science
- Philosophy
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://link.springer.com/article/10.1007/s13347-023-00669-w
oa: '1'
project:
- _id: '109'
name: 'TRR 318: TRR 318 - Erklärbarkeit konstruieren'
- _id: '370'
name: 'TRR 318; TP B06: Ethik und Normativität der erklärbaren KI'
publication: Philosophy & Technology
publication_identifier:
issn:
- 2210-5433
- 2210-5441
publication_status: published
publisher: Springer Science and Business Media LLC
quality_controlled: '1'
status: public
title: Technology and Civic Virtue
type: journal_article
user_id: '102524'
volume: 36
year: '2023'
...
---
_id: '50613'
author:
- first_name: S.
full_name: Hassani, S.
last_name: Hassani
- first_name: K.
full_name: Jakob, K.
last_name: Jakob
- first_name: S.
full_name: Schwab, S.
last_name: Schwab
- first_name: Frank
full_name: Hellmich, Frank
id: '26282'
last_name: Hellmich
- first_name: Marwin Felix
full_name: Löper, Marwin Felix
id: '26693'
last_name: Löper
- first_name: Gamze
full_name: Görel, Gamze
id: '13345'
last_name: Görel
citation:
ama: Hassani S, Jakob K, Schwab S, Hellmich F, Löper MF, Görel G. Fostering students’
peer relationships through the classroom-based intervention FRIEND-SHIP. Education
3-13. International Journal of Primary, Elementary and Early Years Education.
2023;53(8):1339-1354. doi:10.1080/03004279.2023.2267584
apa: Hassani, S., Jakob, K., Schwab, S., Hellmich, F., Löper, M. F., & Görel,
G. (2023). Fostering students’ peer relationships through the classroom-based
intervention FRIEND-SHIP. Education 3-13. International Journal of Primary,
Elementary and Early Years Education., 53(8), 1339–1354. https://doi.org/10.1080/03004279.2023.2267584
bibtex: '@article{Hassani_Jakob_Schwab_Hellmich_Löper_Görel_2023, title={Fostering
students’ peer relationships through the classroom-based intervention FRIEND-SHIP.
Education 3-13}, volume={53}, DOI={10.1080/03004279.2023.2267584},
number={8}, journal={International Journal of Primary, Elementary and Early Years
Education.}, publisher={Informa UK Limited}, author={Hassani, S. and Jakob, K.
and Schwab, S. and Hellmich, Frank and Löper, Marwin Felix and Görel, Gamze},
year={2023}, pages={1339–1354} }'
chicago: 'Hassani, S., K. Jakob, S. Schwab, Frank Hellmich, Marwin Felix Löper,
and Gamze Görel. “Fostering Students’ Peer Relationships through the Classroom-Based
Intervention FRIEND-SHIP. Education 3-13.” International Journal of Primary,
Elementary and Early Years Education. 53, no. 8 (2023): 1339–54. https://doi.org/10.1080/03004279.2023.2267584.'
ieee: 'S. Hassani, K. Jakob, S. Schwab, F. Hellmich, M. F. Löper, and G. Görel,
“Fostering students’ peer relationships through the classroom-based intervention
FRIEND-SHIP. Education 3-13,” International Journal of Primary, Elementary
and Early Years Education., vol. 53, no. 8, pp. 1339–1354, 2023, doi: 10.1080/03004279.2023.2267584.'
mla: Hassani, S., et al. “Fostering Students’ Peer Relationships through the Classroom-Based
Intervention FRIEND-SHIP. Education 3-13.” International Journal of Primary,
Elementary and Early Years Education., vol. 53, no. 8, Informa UK Limited,
2023, pp. 1339–54, doi:10.1080/03004279.2023.2267584.
short: S. Hassani, K. Jakob, S. Schwab, F. Hellmich, M.F. Löper, G. Görel, International
Journal of Primary, Elementary and Early Years Education. 53 (2023) 1339–1354.
date_created: 2024-01-18T16:05:04Z
date_updated: 2025-10-30T07:18:46Z
department:
- _id: '460'
doi: 10.1080/03004279.2023.2267584
intvolume: ' 53'
issue: '8'
keyword:
- Life-span and Life-course Studies
- Education
language:
- iso: eng
page: 1339-1354
publication: International Journal of Primary, Elementary and Early Years Education.
publication_identifier:
issn:
- 0300-4279
- 1475-7575
publication_status: published
publisher: Informa UK Limited
status: public
title: Fostering students’ peer relationships through the classroom-based intervention
FRIEND-SHIP. Education 3-13
type: journal_article
user_id: '57672'
volume: 53
year: '2023'
...
---
_id: '36416'
author:
- first_name: Jianbo
full_name: De, Jianbo
last_name: De
- first_name: Xuekai
full_name: Ma, Xuekai
id: '59416'
last_name: Ma
- first_name: Fan
full_name: Yin, Fan
last_name: Yin
- first_name: Jiahuan
full_name: Ren, Jiahuan
last_name: Ren
- first_name: Jiannian
full_name: Yao, Jiannian
last_name: Yao
- first_name: Stefan
full_name: Schumacher, Stefan
id: '27271'
last_name: Schumacher
orcid: 0000-0003-4042-4951
- first_name: Qing
full_name: Liao, Qing
last_name: Liao
- first_name: Hongbing
full_name: Fu, Hongbing
last_name: Fu
- first_name: Guillaume
full_name: Malpuech, Guillaume
last_name: Malpuech
- first_name: Dmitry
full_name: Solnyshkov, Dmitry
last_name: Solnyshkov
citation:
ama: De J, Ma X, Yin F, et al. Room-Temperature Electrical Field-Enhanced Ultrafast
Switch in Organic Microcavity Polariton Condensates. Journal of the American
Chemical Society (JACS). 2023;145(3):1557-1563. doi:10.1021/jacs.2c07557
apa: De, J., Ma, X., Yin, F., Ren, J., Yao, J., Schumacher, S., Liao, Q., Fu, H.,
Malpuech, G., & Solnyshkov, D. (2023). Room-Temperature Electrical Field-Enhanced
Ultrafast Switch in Organic Microcavity Polariton Condensates. Journal of the
American Chemical Society (JACS), 145(3), 1557–1563. https://doi.org/10.1021/jacs.2c07557
bibtex: '@article{De_Ma_Yin_Ren_Yao_Schumacher_Liao_Fu_Malpuech_Solnyshkov_2023,
title={Room-Temperature Electrical Field-Enhanced Ultrafast Switch in Organic
Microcavity Polariton Condensates}, volume={145}, DOI={10.1021/jacs.2c07557},
number={3}, journal={Journal of the American Chemical Society (JACS)}, publisher={American
Chemical Society (ACS)}, author={De, Jianbo and Ma, Xuekai and Yin, Fan and Ren,
Jiahuan and Yao, Jiannian and Schumacher, Stefan and Liao, Qing and Fu, Hongbing
and Malpuech, Guillaume and Solnyshkov, Dmitry}, year={2023}, pages={1557–1563}
}'
chicago: 'De, Jianbo, Xuekai Ma, Fan Yin, Jiahuan Ren, Jiannian Yao, Stefan Schumacher,
Qing Liao, Hongbing Fu, Guillaume Malpuech, and Dmitry Solnyshkov. “Room-Temperature
Electrical Field-Enhanced Ultrafast Switch in Organic Microcavity Polariton Condensates.”
Journal of the American Chemical Society (JACS) 145, no. 3 (2023): 1557–63.
https://doi.org/10.1021/jacs.2c07557.'
ieee: 'J. De et al., “Room-Temperature Electrical Field-Enhanced Ultrafast
Switch in Organic Microcavity Polariton Condensates,” Journal of the American
Chemical Society (JACS), vol. 145, no. 3, pp. 1557–1563, 2023, doi: 10.1021/jacs.2c07557.'
mla: De, Jianbo, et al. “Room-Temperature Electrical Field-Enhanced Ultrafast Switch
in Organic Microcavity Polariton Condensates.” Journal of the American Chemical
Society (JACS), vol. 145, no. 3, American Chemical Society (ACS), 2023, pp.
1557–63, doi:10.1021/jacs.2c07557.
short: J. De, X. Ma, F. Yin, J. Ren, J. Yao, S. Schumacher, Q. Liao, H. Fu, G. Malpuech,
D. Solnyshkov, Journal of the American Chemical Society (JACS) 145 (2023) 1557–1563.
date_created: 2023-01-12T12:07:52Z
date_updated: 2025-12-05T13:50:32Z
department:
- _id: '15'
- _id: '170'
- _id: '705'
- _id: '297'
- _id: '230'
- _id: '429'
- _id: '35'
doi: 10.1021/jacs.2c07557
intvolume: ' 145'
issue: '3'
keyword:
- Colloid and Surface Chemistry
- Biochemistry
- General Chemistry
- Catalysis
language:
- iso: eng
page: 1557-1563
project:
- _id: '53'
name: 'TRR 142: TRR 142'
- _id: '54'
name: 'TRR 142 - A: TRR 142 - Project Area A'
- _id: '61'
name: 'TRR 142 - A4: TRR 142 - Subproject A4'
- _id: '53'
name: 'TRR 142: Maßgeschneiderte nichtlineare Photonik: Von grundlegenden Konzepten
zu funktionellen Strukturen'
publication: Journal of the American Chemical Society (JACS)
publication_identifier:
issn:
- 0002-7863
- 1520-5126
publication_status: published
publisher: American Chemical Society (ACS)
status: public
title: Room-Temperature Electrical Field-Enhanced Ultrafast Switch in Organic Microcavity
Polariton Condensates
type: journal_article
user_id: '16199'
volume: 145
year: '2023'
...
---
_id: '36471'
abstract:
- lang: eng
text: Superconducting nanowire single-photon detectors (SNSPDs) show near
unity efficiency, low dark count rate, and short recovery time. Combining these
characteristics with temporal control of SNSPDs broadens their applications as
in active de-latching for higher dynamic range counting or temporal filtering
for pump-probe spectroscopy or LiDAR. To that end, we demonstrate active gating
of an SNSPD with a minimum off-to-on rise time of 2.4 ns and a total gate length
of 5.0 ns. We show how the rise time depends on the inductance of the detector
in combination with the control electronics. The gate window is demonstrated to
be fully and freely, electrically tunable up to 500 ns at a repetition rate of
1.0 MHz, as well as ungated, free-running operation. Control electronics to generate
the gating are mounted on the 2.3 K stage of a closed-cycle sorption cryostat,
while the detector is operated on the cold stage at 0.8 K. We show that the efficiency
and timing jitter of the detector is not altered during the on-time of the gating
window. We exploit gated operation to demonstrate a method to increase in the
photon counting dynamic range by a factor 11.2, as well as temporal filtering
of a strong pump in an emulated pump-probe experiment.
article_number: '610'
author:
- first_name: Thomas
full_name: Hummel, Thomas
id: '83846'
last_name: Hummel
orcid: 0000-0001-8627-2119
- first_name: Alex
full_name: Widhalm, Alex
last_name: Widhalm
- first_name: Jan Philipp
full_name: Höpker, Jan Philipp
id: '33913'
last_name: Höpker
- first_name: Klaus
full_name: Jöns, Klaus
id: '85353'
last_name: Jöns
- first_name: Jin
full_name: Chang, Jin
last_name: Chang
- first_name: Andreas
full_name: Fognini, Andreas
last_name: Fognini
- first_name: Stephan
full_name: Steinhauer, Stephan
last_name: Steinhauer
- first_name: Val
full_name: Zwiller, Val
last_name: Zwiller
- first_name: Artur
full_name: Zrenner, Artur
id: '606'
last_name: Zrenner
orcid: 0000-0002-5190-0944
- first_name: Tim
full_name: Bartley, Tim
id: '49683'
last_name: Bartley
citation:
ama: Hummel T, Widhalm A, Höpker JP, et al. Nanosecond gating of superconducting
nanowire single-photon detectors using cryogenic bias circuitry. Optics Express.
2023;31(1). doi:10.1364/oe.472058
apa: Hummel, T., Widhalm, A., Höpker, J. P., Jöns, K., Chang, J., Fognini, A., Steinhauer,
S., Zwiller, V., Zrenner, A., & Bartley, T. (2023). Nanosecond gating of superconducting
nanowire single-photon detectors using cryogenic bias circuitry. Optics Express,
31(1), Article 610. https://doi.org/10.1364/oe.472058
bibtex: '@article{Hummel_Widhalm_Höpker_Jöns_Chang_Fognini_Steinhauer_Zwiller_Zrenner_Bartley_2023,
title={Nanosecond gating of superconducting nanowire single-photon detectors using
cryogenic bias circuitry}, volume={31}, DOI={10.1364/oe.472058},
number={1610}, journal={Optics Express}, publisher={Optica Publishing Group},
author={Hummel, Thomas and Widhalm, Alex and Höpker, Jan Philipp and Jöns, Klaus
and Chang, Jin and Fognini, Andreas and Steinhauer, Stephan and Zwiller, Val and
Zrenner, Artur and Bartley, Tim}, year={2023} }'
chicago: Hummel, Thomas, Alex Widhalm, Jan Philipp Höpker, Klaus Jöns, Jin Chang,
Andreas Fognini, Stephan Steinhauer, Val Zwiller, Artur Zrenner, and Tim Bartley.
“Nanosecond Gating of Superconducting Nanowire Single-Photon Detectors Using Cryogenic
Bias Circuitry.” Optics Express 31, no. 1 (2023). https://doi.org/10.1364/oe.472058.
ieee: 'T. Hummel et al., “Nanosecond gating of superconducting nanowire single-photon
detectors using cryogenic bias circuitry,” Optics Express, vol. 31, no.
1, Art. no. 610, 2023, doi: 10.1364/oe.472058.'
mla: Hummel, Thomas, et al. “Nanosecond Gating of Superconducting Nanowire Single-Photon
Detectors Using Cryogenic Bias Circuitry.” Optics Express, vol. 31, no.
1, 610, Optica Publishing Group, 2023, doi:10.1364/oe.472058.
short: T. Hummel, A. Widhalm, J.P. Höpker, K. Jöns, J. Chang, A. Fognini, S. Steinhauer,
V. Zwiller, A. Zrenner, T. Bartley, Optics Express 31 (2023).
date_created: 2023-01-12T14:46:40Z
date_updated: 2025-12-11T13:05:14Z
department:
- _id: '15'
- _id: '623'
- _id: '230'
- _id: '429'
- _id: '642'
doi: 10.1364/oe.472058
intvolume: ' 31'
issue: '1'
keyword:
- Atomic and Molecular Physics
- and Optics
language:
- iso: eng
publication: Optics Express
publication_identifier:
issn:
- 1094-4087
publication_status: published
publisher: Optica Publishing Group
status: public
title: Nanosecond gating of superconducting nanowire single-photon detectors using
cryogenic bias circuitry
type: journal_article
user_id: '48188'
volume: 31
year: '2023'
...
---
_id: '41035'
article_number: '2200408'
author:
- first_name: Polina R.
full_name: Sharapova, Polina R.
id: '60286'
last_name: Sharapova
- first_name: Sergey S.
full_name: Kruk, Sergey S.
last_name: Kruk
- first_name: Alexander S.
full_name: Solntsev, Alexander S.
last_name: Solntsev
citation:
ama: 'Sharapova PR, Kruk SS, Solntsev AS. Nonlinear Dielectric Nanoresonators and
Metasurfaces: Toward Efficient Generation of Entangled Photons. Laser &
Photonics Reviews. Published online 2023. doi:10.1002/lpor.202200408'
apa: 'Sharapova, P. R., Kruk, S. S., & Solntsev, A. S. (2023). Nonlinear Dielectric
Nanoresonators and Metasurfaces: Toward Efficient Generation of Entangled Photons.
Laser & Photonics Reviews, Article 2200408. https://doi.org/10.1002/lpor.202200408'
bibtex: '@article{Sharapova_Kruk_Solntsev_2023, title={Nonlinear Dielectric Nanoresonators
and Metasurfaces: Toward Efficient Generation of Entangled Photons}, DOI={10.1002/lpor.202200408},
number={2200408}, journal={Laser & Photonics Reviews}, publisher={Wiley},
author={Sharapova, Polina R. and Kruk, Sergey S. and Solntsev, Alexander S.},
year={2023} }'
chicago: 'Sharapova, Polina R., Sergey S. Kruk, and Alexander S. Solntsev. “Nonlinear
Dielectric Nanoresonators and Metasurfaces: Toward Efficient Generation of Entangled
Photons.” Laser & Photonics Reviews, 2023. https://doi.org/10.1002/lpor.202200408.'
ieee: 'P. R. Sharapova, S. S. Kruk, and A. S. Solntsev, “Nonlinear Dielectric Nanoresonators
and Metasurfaces: Toward Efficient Generation of Entangled Photons,” Laser
& Photonics Reviews, Art. no. 2200408, 2023, doi: 10.1002/lpor.202200408.'
mla: 'Sharapova, Polina R., et al. “Nonlinear Dielectric Nanoresonators and Metasurfaces:
Toward Efficient Generation of Entangled Photons.” Laser & Photonics
Reviews, 2200408, Wiley, 2023, doi:10.1002/lpor.202200408.'
short: P.R. Sharapova, S.S. Kruk, A.S. Solntsev, Laser & Photonics Reviews
(2023).
date_created: 2023-01-30T18:24:45Z
date_updated: 2025-12-16T11:26:28Z
department:
- _id: '15'
- _id: '170'
- _id: '230'
- _id: '569'
- _id: '429'
- _id: '35'
doi: 10.1002/lpor.202200408
keyword:
- Condensed Matter Physics
- Atomic and Molecular Physics
- and Optics
- Electronic
- Optical and Magnetic Materials
language:
- iso: eng
publication: Laser & Photonics Reviews
publication_identifier:
issn:
- 1863-8880
- 1863-8899
publication_status: published
publisher: Wiley
status: public
title: 'Nonlinear Dielectric Nanoresonators and Metasurfaces: Toward Efficient Generation
of Entangled Photons'
type: journal_article
user_id: '16199'
year: '2023'
...
---
_id: '44081'
article_number: '020306'
author:
- first_name: Laura
full_name: Serino, Laura
id: '88242'
last_name: Serino
- first_name: Jano
full_name: Gil López, Jano
id: '51223'
last_name: Gil López
- first_name: Michael
full_name: Stefszky, Michael
id: '42777'
last_name: Stefszky
- first_name: Raimund
full_name: Ricken, Raimund
last_name: Ricken
- first_name: Christof
full_name: Eigner, Christof
id: '13244'
last_name: Eigner
orcid: https://orcid.org/0000-0002-5693-3083
- first_name: Benjamin
full_name: Brecht, Benjamin
id: '27150'
last_name: Brecht
orcid: '0000-0003-4140-0556 '
- first_name: Christine
full_name: Silberhorn, Christine
id: '26263'
last_name: Silberhorn
citation:
ama: Serino L, Gil López J, Stefszky M, et al. Realization of a Multi-Output Quantum
Pulse Gate for Decoding High-Dimensional Temporal Modes of Single-Photon States.
PRX Quantum. 2023;4(2). doi:10.1103/prxquantum.4.020306
apa: Serino, L., Gil López, J., Stefszky, M., Ricken, R., Eigner, C., Brecht, B.,
& Silberhorn, C. (2023). Realization of a Multi-Output Quantum Pulse Gate
for Decoding High-Dimensional Temporal Modes of Single-Photon States. PRX Quantum,
4(2), Article 020306. https://doi.org/10.1103/prxquantum.4.020306
bibtex: '@article{Serino_Gil López_Stefszky_Ricken_Eigner_Brecht_Silberhorn_2023,
title={Realization of a Multi-Output Quantum Pulse Gate for Decoding High-Dimensional
Temporal Modes of Single-Photon States}, volume={4}, DOI={10.1103/prxquantum.4.020306},
number={2020306}, journal={PRX Quantum}, publisher={American Physical Society
(APS)}, author={Serino, Laura and Gil López, Jano and Stefszky, Michael and Ricken,
Raimund and Eigner, Christof and Brecht, Benjamin and Silberhorn, Christine},
year={2023} }'
chicago: Serino, Laura, Jano Gil López, Michael Stefszky, Raimund Ricken, Christof
Eigner, Benjamin Brecht, and Christine Silberhorn. “Realization of a Multi-Output
Quantum Pulse Gate for Decoding High-Dimensional Temporal Modes of Single-Photon
States.” PRX Quantum 4, no. 2 (2023). https://doi.org/10.1103/prxquantum.4.020306.
ieee: 'L. Serino et al., “Realization of a Multi-Output Quantum Pulse Gate
for Decoding High-Dimensional Temporal Modes of Single-Photon States,” PRX
Quantum, vol. 4, no. 2, Art. no. 020306, 2023, doi: 10.1103/prxquantum.4.020306.'
mla: Serino, Laura, et al. “Realization of a Multi-Output Quantum Pulse Gate for
Decoding High-Dimensional Temporal Modes of Single-Photon States.” PRX Quantum,
vol. 4, no. 2, 020306, American Physical Society (APS), 2023, doi:10.1103/prxquantum.4.020306.
short: L. Serino, J. Gil López, M. Stefszky, R. Ricken, C. Eigner, B. Brecht, C.
Silberhorn, PRX Quantum 4 (2023).
date_created: 2023-04-20T12:38:23Z
date_updated: 2025-12-18T16:15:18Z
department:
- _id: '288'
- _id: '623'
- _id: '15'
doi: 10.1103/prxquantum.4.020306
intvolume: ' 4'
issue: '2'
keyword:
- General Physics and Astronomy
- Mathematical Physics
- Applied Mathematics
- Electronic
- Optical and Magnetic Materials
- Electrical and Electronic Engineering
- General Computer Science
language:
- iso: eng
publication: PRX Quantum
publication_identifier:
issn:
- 2691-3399
publication_status: published
publisher: American Physical Society (APS)
status: public
title: Realization of a Multi-Output Quantum Pulse Gate for Decoding High-Dimensional
Temporal Modes of Single-Photon States
type: journal_article
user_id: '27150'
volume: 4
year: '2023'
...
---
_id: '46863'
author:
- first_name: Maximilian
full_name: Schenke, Maximilian
id: '52638'
last_name: Schenke
orcid: 0000-0001-5427-9527
- first_name: Barnabas
full_name: Haucke-Korber, Barnabas
id: '93461'
last_name: Haucke-Korber
orcid: 0000-0003-0862-2069
- first_name: Oliver
full_name: Wallscheid, Oliver
id: '11291'
last_name: Wallscheid
orcid: https://orcid.org/0000-0001-9362-8777
citation:
ama: Schenke M, Haucke-Korber B, Wallscheid O. Finite-Set Direct Torque Control
via Edge Computing-Assisted Safe Reinforcement Learning for a Permanent Magnet
Synchronous Motor. IEEE Transactions on Power Electronics. Published online
2023:1-16. doi:10.1109/tpel.2023.3303651
apa: Schenke, M., Haucke-Korber, B., & Wallscheid, O. (2023). Finite-Set Direct
Torque Control via Edge Computing-Assisted Safe Reinforcement Learning for a Permanent
Magnet Synchronous Motor. IEEE Transactions on Power Electronics, 1–16.
https://doi.org/10.1109/tpel.2023.3303651
bibtex: '@article{Schenke_Haucke-Korber_Wallscheid_2023, title={Finite-Set Direct
Torque Control via Edge Computing-Assisted Safe Reinforcement Learning for a Permanent
Magnet Synchronous Motor}, DOI={10.1109/tpel.2023.3303651},
journal={IEEE Transactions on Power Electronics}, publisher={Institute of Electrical
and Electronics Engineers (IEEE)}, author={Schenke, Maximilian and Haucke-Korber,
Barnabas and Wallscheid, Oliver}, year={2023}, pages={1–16} }'
chicago: Schenke, Maximilian, Barnabas Haucke-Korber, and Oliver Wallscheid. “Finite-Set
Direct Torque Control via Edge Computing-Assisted Safe Reinforcement Learning
for a Permanent Magnet Synchronous Motor.” IEEE Transactions on Power Electronics,
2023, 1–16. https://doi.org/10.1109/tpel.2023.3303651.
ieee: 'M. Schenke, B. Haucke-Korber, and O. Wallscheid, “Finite-Set Direct Torque
Control via Edge Computing-Assisted Safe Reinforcement Learning for a Permanent
Magnet Synchronous Motor,” IEEE Transactions on Power Electronics, pp.
1–16, 2023, doi: 10.1109/tpel.2023.3303651.'
mla: Schenke, Maximilian, et al. “Finite-Set Direct Torque Control via Edge Computing-Assisted
Safe Reinforcement Learning for a Permanent Magnet Synchronous Motor.” IEEE
Transactions on Power Electronics, Institute of Electrical and Electronics
Engineers (IEEE), 2023, pp. 1–16, doi:10.1109/tpel.2023.3303651.
short: M. Schenke, B. Haucke-Korber, O. Wallscheid, IEEE Transactions on Power Electronics
(2023) 1–16.
date_created: 2023-09-07T12:08:05Z
date_updated: 2025-12-19T12:44:23Z
department:
- _id: '52'
doi: 10.1109/tpel.2023.3303651
keyword:
- Electrical and Electronic Engineering
language:
- iso: eng
page: 1-16
publication: IEEE Transactions on Power Electronics
publication_identifier:
issn:
- 0885-8993
- 1941-0107
publication_status: published
publisher: Institute of Electrical and Electronics Engineers (IEEE)
status: public
title: Finite-Set Direct Torque Control via Edge Computing-Assisted Safe Reinforcement
Learning for a Permanent Magnet Synchronous Motor
type: journal_article
user_id: '93461'
year: '2023'
...
---
_id: '50233'
author:
- first_name: Maria Anna
full_name: Robaszkiewicz, Maria Anna
id: '26919'
last_name: Robaszkiewicz
citation:
ama: Robaszkiewicz MA. Life, Theory, and Group Identity in Hannah Arendt’s Thought,
by Karen Fry. Arendt Studies. 2023;7:247-252. doi:10.5840/arendtstudies2023756
apa: Robaszkiewicz, M. A. (2023). Life, Theory, and Group Identity in Hannah Arendt’s
Thought, by Karen Fry. In Arendt Studies (Vol. 7, pp. 247–252). Philosophy
Documentation Center. https://doi.org/10.5840/arendtstudies2023756
bibtex: '@article{Robaszkiewicz_2023, title={Life, Theory, and Group Identity in
Hannah Arendt’s Thought, by Karen Fry}, volume={7}, DOI={10.5840/arendtstudies2023756},
journal={Arendt Studies}, publisher={Philosophy Documentation Center}, author={Robaszkiewicz,
Maria Anna}, year={2023}, pages={247–252} }'
chicago: Robaszkiewicz, Maria Anna. “Life, Theory, and Group Identity in Hannah
Arendt’s Thought, by Karen Fry.” Arendt Studies. Philosophy Documentation
Center, 2023. https://doi.org/10.5840/arendtstudies2023756.
ieee: 'M. A. Robaszkiewicz, “Life, Theory, and Group Identity in Hannah Arendt’s
Thought, by Karen Fry,” Arendt Studies, vol. 7. Philosophy Documentation
Center, pp. 247–252, 2023, doi: 10.5840/arendtstudies2023756.'
mla: Robaszkiewicz, Maria Anna. “Life, Theory, and Group Identity in Hannah Arendt’s
Thought, by Karen Fry.” Arendt Studies, vol. 7, Philosophy Documentation
Center, 2023, pp. 247–52, doi:10.5840/arendtstudies2023756.
short: M.A. Robaszkiewicz, Arendt Studies 7 (2023) 247–252.
date_created: 2024-01-05T18:58:30Z
date_updated: 2025-01-08T17:50:47Z
doi: 10.5840/arendtstudies2023756
intvolume: ' 7'
keyword:
- Energy Engineering and Power Technology
- Fuel Technology
language:
- iso: eng
page: 247-252
publication: Arendt Studies
publication_identifier:
issn:
- 2574-2329
publication_status: published
publisher: Philosophy Documentation Center
status: public
title: Life, Theory, and Group Identity in Hannah Arendt's Thought, by Karen Fry
type: review
user_id: '26919'
volume: 7
year: '2023'
...