[{"user_id":"75657","_id":"67395","language":[{"iso":"eng"}],"date_updated":"2026-10-05T09:49:44Z","author":[{"last_name":"Irmak","orcid":"https://orcid.org/0009-0009-6267-2957","first_name":"Hayrettin","full_name":"Irmak, Hayrettin","id":"75657"},{"last_name":"Marten","orcid":"0009-0001-6433-7839","first_name":"Thorsten","full_name":"Marten, Thorsten","id":"338"},{"first_name":"Thomas","last_name":"Tröster","full_name":"Tröster, Thomas","id":"553"}],"conference":{"location":"Cagliari, Italy","start_date":"2026-06-22","name":"ICCS29 - 29th International Conference on Composite Structures","end_date":"2026-06-26"},"year":"2026","status":"public","title":"Analysis of the effect of fibre-prestressing on residual stresses in CFRP/steel hybrid components using a micromechanics-based finite element simulation with a dehomogenization method","department":[{"_id":"9"},{"_id":"321"},{"_id":"149"}],"type":"conference_abstract","keyword":["fibre-prestressing","residual stresses","process simulation","prepreg","dehomogenization method"],"date_created":"2026-10-05T09:39:49Z","place":"Cagliari, Italy","citation":{"mla":"Irmak, Hayrettin, et al. “Analysis of the Effect of Fibre-Prestressing on Residual Stresses in CFRP/Steel Hybrid Components Using a Micromechanics-Based Finite Element Simulation with a Dehomogenization Method.” <i>ICCS29 - 29th International Conference on Composite Structures</i>, 2026.","bibtex":"@inproceedings{Irmak_Marten_Tröster_2026, place={Cagliari, Italy}, title={Analysis of the effect of fibre-prestressing on residual stresses in CFRP/steel hybrid components using a micromechanics-based finite element simulation with a dehomogenization method}, booktitle={ICCS29 - 29th International Conference on Composite Structures}, author={Irmak, Hayrettin and Marten, Thorsten and Tröster, Thomas}, year={2026} }","ama":"Irmak H, Marten T, Tröster T. Analysis of the effect of fibre-prestressing on residual stresses in CFRP/steel hybrid components using a micromechanics-based finite element simulation with a dehomogenization method. In: <i>ICCS29 - 29th International Conference on Composite Structures</i>. ; 2026.","ieee":"H. Irmak, T. Marten, and T. Tröster, “Analysis of the effect of fibre-prestressing on residual stresses in CFRP/steel hybrid components using a micromechanics-based finite element simulation with a dehomogenization method,” presented at the ICCS29 - 29th International Conference on Composite Structures, Cagliari, Italy, 2026.","apa":"Irmak, H., Marten, T., &#38; Tröster, T. (2026). Analysis of the effect of fibre-prestressing on residual stresses in CFRP/steel hybrid components using a micromechanics-based finite element simulation with a dehomogenization method. <i>ICCS29 - 29th International Conference on Composite Structures</i>. ICCS29 - 29th International Conference on Composite Structures, Cagliari, Italy.","short":"H. Irmak, T. Marten, T. Tröster, in: ICCS29 - 29th International Conference on Composite Structures, Cagliari, Italy, 2026.","chicago":"Irmak, Hayrettin, Thorsten Marten, and Thomas Tröster. “Analysis of the Effect of Fibre-Prestressing on Residual Stresses in CFRP/Steel Hybrid Components Using a Micromechanics-Based Finite Element Simulation with a Dehomogenization Method.” In <i>ICCS29 - 29th International Conference on Composite Structures</i>. Cagliari, Italy, 2026."},"publication":"ICCS29 - 29th International Conference on Composite Structures"},{"user_id":"75657","_id":"67396","language":[{"iso":"eng"}],"date_updated":"2026-10-05T09:51:12Z","author":[{"full_name":"Irmak, Hayrettin","last_name":"Irmak","orcid":"https://orcid.org/0009-0009-6267-2957","first_name":"Hayrettin","id":"75657"},{"id":"338","orcid":"0009-0001-6433-7839","first_name":"Thorsten","last_name":"Marten","full_name":"Marten, Thorsten"},{"first_name":"Thomas","last_name":"Tröster","full_name":"Tröster, Thomas","id":"553"}],"conference":{"location":"Kassel, Germany","name":"RSMSE 2026 - Residual Stress in Materials Science and Engineering","start_date":"2026-06-23","end_date":"2026-06-25"},"title":"The investigation of residual stress distribution in metal-CFRP hybrid structures produced by the developed fiber pre-tensioning tool concept","year":"2026","status":"public","department":[{"_id":"9"},{"_id":"321"},{"_id":"149"}],"keyword":["fibre-prestressing","residual stresses","hybrid structures"],"type":"conference_abstract","date_created":"2026-10-05T09:49:24Z","place":"Kassel, Germany","citation":{"chicago":"Irmak, Hayrettin, Thorsten Marten, and Thomas Tröster. “The Investigation of Residual Stress Distribution in Metal-CFRP Hybrid Structures Produced by the Developed Fiber Pre-Tensioning Tool Concept.” In <i>RSMSE 2026 - Residual Stress in Materials Science and Engineering</i>. Kassel, Germany, 2026.","short":"H. Irmak, T. Marten, T. Tröster, in: RSMSE 2026 - Residual Stress in Materials Science and Engineering, Kassel, Germany, 2026.","apa":"Irmak, H., Marten, T., &#38; Tröster, T. (2026). The investigation of residual stress distribution in metal-CFRP hybrid structures produced by the developed fiber pre-tensioning tool concept. <i>RSMSE 2026 - Residual Stress in Materials Science and Engineering</i>. RSMSE 2026 - Residual Stress in Materials Science and Engineering, Kassel, Germany.","ieee":"H. Irmak, T. Marten, and T. Tröster, “The investigation of residual stress distribution in metal-CFRP hybrid structures produced by the developed fiber pre-tensioning tool concept,” presented at the RSMSE 2026 - Residual Stress in Materials Science and Engineering, Kassel, Germany, 2026.","ama":"Irmak H, Marten T, Tröster T. The investigation of residual stress distribution in metal-CFRP hybrid structures produced by the developed fiber pre-tensioning tool concept. In: <i>RSMSE 2026 - Residual Stress in Materials Science and Engineering</i>. ; 2026.","bibtex":"@inproceedings{Irmak_Marten_Tröster_2026, place={Kassel, Germany}, title={The investigation of residual stress distribution in metal-CFRP hybrid structures produced by the developed fiber pre-tensioning tool concept}, booktitle={RSMSE 2026 - Residual Stress in Materials Science and Engineering}, author={Irmak, Hayrettin and Marten, Thorsten and Tröster, Thomas}, year={2026} }","mla":"Irmak, Hayrettin, et al. “The Investigation of Residual Stress Distribution in Metal-CFRP Hybrid Structures Produced by the Developed Fiber Pre-Tensioning Tool Concept.” <i>RSMSE 2026 - Residual Stress in Materials Science and Engineering</i>, 2026."},"publication":"RSMSE 2026 - Residual Stress in Materials Science and Engineering"},{"place":"Paderborn","quality_controlled":"1","citation":{"apa":"Irmak, H., Claes, L., Wu, S., Marten, T., &#38; Tröster, T. (2025). Assessment of the influence of curing parameters on fibre reinforced epoxy composite properties using guided ultrasonic waves. <i>2025 International Congress on Ultrasonics</i>, 235–238. <a href=\"https://doi.org/10.5162/ultrasonic2025/c13-b3\">https://doi.org/10.5162/ultrasonic2025/c13-b3</a>","ieee":"H. Irmak, L. Claes, S. Wu, T. Marten, and T. Tröster, “Assessment of the influence of curing parameters on fibre reinforced epoxy composite properties using guided ultrasonic waves,” in <i>2025 International Congress on Ultrasonics</i>, Paderborn, Germany, 2025, pp. 235–238, doi: <a href=\"https://doi.org/10.5162/ultrasonic2025/c13-b3\">10.5162/ultrasonic2025/c13-b3</a>.","chicago":"Irmak, Hayrettin, Leander Claes, Shuang Wu, Thorsten Marten, and Thomas Tröster. “Assessment of the Influence of Curing Parameters on Fibre Reinforced Epoxy Composite Properties Using Guided Ultrasonic Waves.” In <i>2025 International Congress on Ultrasonics</i>, 235–238. Paderborn: AMA Service GmbH, 2025. <a href=\"https://doi.org/10.5162/ultrasonic2025/c13-b3\">https://doi.org/10.5162/ultrasonic2025/c13-b3</a>.","short":"H. Irmak, L. Claes, S. Wu, T. Marten, T. Tröster, in: 2025 International Congress on Ultrasonics, AMA Service GmbH, Paderborn, 2025, pp. 235–238.","mla":"Irmak, Hayrettin, et al. “Assessment of the Influence of Curing Parameters on Fibre Reinforced Epoxy Composite Properties Using Guided Ultrasonic Waves.” <i>2025 International Congress on Ultrasonics</i>, AMA Service GmbH, 2025, pp. 235–238, doi:<a href=\"https://doi.org/10.5162/ultrasonic2025/c13-b3\">10.5162/ultrasonic2025/c13-b3</a>.","ama":"Irmak H, Claes L, Wu S, Marten T, Tröster T. Assessment of the influence of curing parameters on fibre reinforced epoxy composite properties using guided ultrasonic waves. In: <i>2025 International Congress on Ultrasonics</i>. AMA Service GmbH; 2025:235–238. doi:<a href=\"https://doi.org/10.5162/ultrasonic2025/c13-b3\">10.5162/ultrasonic2025/c13-b3</a>","bibtex":"@inproceedings{Irmak_Claes_Wu_Marten_Tröster_2025, place={Paderborn}, title={Assessment of the influence of curing parameters on fibre reinforced epoxy composite properties using guided ultrasonic waves}, DOI={<a href=\"https://doi.org/10.5162/ultrasonic2025/c13-b3\">10.5162/ultrasonic2025/c13-b3</a>}, booktitle={2025 International Congress on Ultrasonics}, publisher={AMA Service GmbH}, author={Irmak, Hayrettin and Claes, Leander and Wu, Shuang and Marten, Thorsten and Tröster, Thomas}, year={2025}, pages={235–238} }"},"user_id":"338","page":"235–238","publisher":"AMA Service GmbH","_id":"62302","status":"public","conference":{"end_date":"2025-09-25","start_date":"2025-09-21","name":"2025 ICU PADERBORN - 9th International Congress on Ultrasonics","location":"Paderborn, Germany"},"keyword":["fibre-reinforced polymers","differential scanning calorimetry","degree of crosslinking","guided waves","ultrasound"],"type":"conference","department":[{"_id":"49"},{"_id":"149"},{"_id":"321"}],"date_created":"2025-11-25T12:23:07Z","abstract":[{"lang":"eng","text":"The degree of crosslinking in unidirectional prepreg materials was investigated using differential scanning calorimetry to assess their curing behavior and thermal characteristics. To complement these measurements with a non-destructive, in-situ method, the propagation properties of guided acoustic waves in cured carbon fibre-reinforced epoxy plates were analysed. Correlations between the degree of crosslinking and acoustically determined mechanical properties were drawn to enable a future non-destructive evaluation approach."}],"publication":"2025 International Congress on Ultrasonics","doi":"10.5162/ultrasonic2025/c13-b3","language":[{"iso":"eng"}],"publication_status":"published","date_updated":"2026-03-23T10:31:53Z","year":"2025","title":"Assessment of the influence of curing parameters on fibre reinforced epoxy composite properties using guided ultrasonic waves","author":[{"id":"75657","last_name":"Irmak","orcid":"https://orcid.org/0009-0009-6267-2957","first_name":"Hayrettin","full_name":"Irmak, Hayrettin"},{"full_name":"Claes, Leander","last_name":"Claes","orcid":"0000-0002-4393-268X","first_name":"Leander","id":"11829"},{"orcid":"0000-0001-8645-9952","last_name":"Wu","first_name":"Shuang","full_name":"Wu, Shuang","id":"48039"},{"id":"338","first_name":"Thorsten","orcid":"0009-0001-6433-7839","last_name":"Marten","full_name":"Marten, Thorsten"},{"last_name":"Tröster","first_name":"Thomas","full_name":"Tröster, Thomas","id":"553"}],"publication_identifier":{"isbn":["978-3-910600-08-9"]}},{"title":"Development of a Tool Concept for Prestressed Fibre Metal Laminates and Their Effect on Interface Failure","year":"2024","author":[{"first_name":"Hayrettin","orcid":"https://orcid.org/0009-0009-6267-2957","last_name":"Irmak","full_name":"Irmak, Hayrettin","id":"75657"},{"id":"72722","last_name":"Tinkloh","first_name":"Steffen Rainer","full_name":"Tinkloh, Steffen Rainer"},{"last_name":"Marten","first_name":"Thorsten","orcid":"0009-0001-6433-7839","full_name":"Marten, Thorsten","id":"338"},{"first_name":"Thomas","last_name":"Tröster","full_name":"Tröster, Thomas","id":"553"}],"publication_identifier":{"issn":["2504-477X"]},"date_updated":"2026-03-23T10:31:09Z","publication_status":"published","intvolume":"         8","article_type":"original","article_number":"316","language":[{"iso":"eng"}],"doi":"10.3390/jcs8080316","issue":"8","publication":"Journal of Composites Science","abstract":[{"lang":"eng","text":"The use of hybrid materials as a combination of fibre-reinforced plastic (FRP) and metal is of great interest in order to meet the increasing demands for sustainability, efficiency, and emission reduction based on the principle of lightweight design. These two components can therefore be joined using the intrinsic joining technique, which is formed by curing the matrix of the FRP component. In this study, for the hybrid joint, unidirectionally pre-impregnated semi-finished products (prepregs) with duromer matrix resin and micro-alloyed HC340LA steel were used. In order to conduct a detailed investigation, the damage mechanisms of intrinsically produced fibre metal laminates (FMLs), a new clamping device, and a novel pressing tool were designed and put into operation. The prepregs were prestressed by applying a preloading force using a specially designed prestressing frame. Hybrid specimens were then produced and subjected to nanoindentation and a shear tensile test. In particular, the effect of the residual stress state by varying the defined prestressing force on the damage mechanisms was studied. The results showed that no fracture patterns occurred in the interface of the specimens without preloading as a result of curing at 120 °C, whereas specimens with preloading failed at the boundary layer in the tensile range. Nevertheless, all specimens cured at 160 °C failed at the boundary layer in the tensile range. Furthermore, it was proven that the force and displacement of the preloaded specimens were promisingly higher than those of the unpreloaded specimens."}],"date_created":"2024-08-23T06:47:27Z","keyword":["CFRP","prestressing","fibre metal laminate","interface","prepreg","shear tensile test"],"type":"journal_article","department":[{"_id":"9"},{"_id":"321"},{"_id":"149"}],"status":"public","_id":"55743","publisher":"MDPI AG","user_id":"338","volume":8,"citation":{"mla":"Irmak, Hayrettin, et al. “Development of a Tool Concept for Prestressed Fibre Metal Laminates and Their Effect on Interface Failure.” <i>Journal of Composites Science</i>, vol. 8, no. 8, 316, MDPI AG, 2024, doi:<a href=\"https://doi.org/10.3390/jcs8080316\">10.3390/jcs8080316</a>.","ama":"Irmak H, Tinkloh SR, Marten T, Tröster T. Development of a Tool Concept for Prestressed Fibre Metal Laminates and Their Effect on Interface Failure. <i>Journal of Composites Science</i>. 2024;8(8). doi:<a href=\"https://doi.org/10.3390/jcs8080316\">10.3390/jcs8080316</a>","bibtex":"@article{Irmak_Tinkloh_Marten_Tröster_2024, title={Development of a Tool Concept for Prestressed Fibre Metal Laminates and Their Effect on Interface Failure}, volume={8}, DOI={<a href=\"https://doi.org/10.3390/jcs8080316\">10.3390/jcs8080316</a>}, number={8316}, journal={Journal of Composites Science}, publisher={MDPI AG}, author={Irmak, Hayrettin and Tinkloh, Steffen Rainer and Marten, Thorsten and Tröster, Thomas}, year={2024} }","apa":"Irmak, H., Tinkloh, S. R., Marten, T., &#38; Tröster, T. (2024). Development of a Tool Concept for Prestressed Fibre Metal Laminates and Their Effect on Interface Failure. <i>Journal of Composites Science</i>, <i>8</i>(8), Article 316. <a href=\"https://doi.org/10.3390/jcs8080316\">https://doi.org/10.3390/jcs8080316</a>","ieee":"H. Irmak, S. R. Tinkloh, T. Marten, and T. Tröster, “Development of a Tool Concept for Prestressed Fibre Metal Laminates and Their Effect on Interface Failure,” <i>Journal of Composites Science</i>, vol. 8, no. 8, Art. no. 316, 2024, doi: <a href=\"https://doi.org/10.3390/jcs8080316\">10.3390/jcs8080316</a>.","chicago":"Irmak, Hayrettin, Steffen Rainer Tinkloh, Thorsten Marten, and Thomas Tröster. “Development of a Tool Concept for Prestressed Fibre Metal Laminates and Their Effect on Interface Failure.” <i>Journal of Composites Science</i> 8, no. 8 (2024). <a href=\"https://doi.org/10.3390/jcs8080316\">https://doi.org/10.3390/jcs8080316</a>.","short":"H. Irmak, S.R. Tinkloh, T. Marten, T. Tröster, Journal of Composites Science 8 (2024)."},"quality_controlled":"1"},{"article_number":"109209","language":[{"iso":"eng"}],"doi":"10.1016/j.compositesb.2021.109209","year":"2021","title":"Non-linear mean-field modelling of UD composite laminates accounting for average asymmetric plasticity of the matrix, debonding and progressive failure","author":[{"full_name":"Cheng, C.","last_name":"Cheng","first_name":"C."},{"last_name":"Wang","first_name":"Z.","full_name":"Wang, Z."},{"last_name":"Jin","first_name":"Z.","full_name":"Jin, Z."},{"first_name":"X.","last_name":"Ju","full_name":"Ju, X."},{"id":"8938","full_name":"Schweizer, Swetlana","first_name":"Swetlana","last_name":"Schweizer"},{"full_name":"Tröster, Thomas","first_name":"Thomas","last_name":"Tröster","id":"553"},{"full_name":"Mahnken, Rolf","first_name":"Rolf","last_name":"Mahnken","id":"335"}],"publication_identifier":{"issn":["1359-8368"]},"publication_status":"published","date_updated":"2025-06-06T08:08:32Z","intvolume":"       224","date_created":"2021-08-18T06:20:21Z","keyword":["Non-linear mean-field homogenization Average asymmetric plasticity of matrix Fibre–matrix interface debonding Micro-mechanical FE-simulation Progressive failure"],"type":"journal_article","department":[{"_id":"9"},{"_id":"154"},{"_id":"321"},{"_id":"149"}],"publication":"Composites Part B: Engineering","abstract":[{"text":"As an effective and accurate method for modelling composite materials, mean-field homogenization is still not well studied in modelling non-linear and damage behaviours of UD composites. Investigated micro FE-simulations show that the matrix of UD composites exhibits different average plastic behaviour, named as average asymmetric matrix plasticity (AAMP), when the composite behaves different under shear, longitudinal and transverse loadings. In this study, a non-linear mean-field debonding model (NMFDM) combining a mean-field model and a fibre–matrix interface debonding model, is developed to simulate UD composites under consideration of AAMP, fibre–matrix interface damage and progressive failure. AAMP is considered by using so-called stress mode factor, which is expressed in terms of basic invariants of the matrix deviatoric stress tensor and is used as an indicator for detection of differences in the loading mode. The material behaviour of UD composites with imperfect interface is assumed identical as for perfect interface and stiffness reduced fibres. Progressive failure criteria are established with consideration of fibre breakage and matrix crack for different fibre orientations. As a representative example for the NMFDM, a C30/E201 UD composite is studied. To verify the model, experiments are conducted on polymers, carbon fibres and UD CFRPs. Finally, the model is applied to simulate a perforated CFRP laminate, which shows excellent prediction ability on deformation, debonding and progressive failure.","lang":"eng"}],"_id":"23431","user_id":"15952","volume":224,"status":"public","citation":{"ama":"Cheng C, Wang Z, Jin Z, et al. Non-linear mean-field modelling of UD composite laminates accounting for average asymmetric plasticity of the matrix, debonding and progressive failure. <i>Composites Part B: Engineering</i>. 2021;224. doi:<a href=\"https://doi.org/10.1016/j.compositesb.2021.109209\">10.1016/j.compositesb.2021.109209</a>","bibtex":"@article{Cheng_Wang_Jin_Ju_Schweizer_Tröster_Mahnken_2021, title={Non-linear mean-field modelling of UD composite laminates accounting for average asymmetric plasticity of the matrix, debonding and progressive failure}, volume={224}, DOI={<a href=\"https://doi.org/10.1016/j.compositesb.2021.109209\">10.1016/j.compositesb.2021.109209</a>}, number={109209}, journal={Composites Part B: Engineering}, author={Cheng, C. and Wang, Z. and Jin, Z. and Ju, X. and Schweizer, Swetlana and Tröster, Thomas and Mahnken, Rolf}, year={2021} }","mla":"Cheng, C., et al. “Non-Linear Mean-Field Modelling of UD Composite Laminates Accounting for Average Asymmetric Plasticity of the Matrix, Debonding and Progressive Failure.” <i>Composites Part B: Engineering</i>, vol. 224, 109209, 2021, doi:<a href=\"https://doi.org/10.1016/j.compositesb.2021.109209\">10.1016/j.compositesb.2021.109209</a>.","short":"C. Cheng, Z. Wang, Z. Jin, X. Ju, S. Schweizer, T. Tröster, R. Mahnken, Composites Part B: Engineering 224 (2021).","chicago":"Cheng, C., Z. Wang, Z. Jin, X. Ju, Swetlana Schweizer, Thomas Tröster, and Rolf Mahnken. “Non-Linear Mean-Field Modelling of UD Composite Laminates Accounting for Average Asymmetric Plasticity of the Matrix, Debonding and Progressive Failure.” <i>Composites Part B: Engineering</i> 224 (2021). <a href=\"https://doi.org/10.1016/j.compositesb.2021.109209\">https://doi.org/10.1016/j.compositesb.2021.109209</a>.","apa":"Cheng, C., Wang, Z., Jin, Z., Ju, X., Schweizer, S., Tröster, T., &#38; Mahnken, R. (2021). Non-linear mean-field modelling of UD composite laminates accounting for average asymmetric plasticity of the matrix, debonding and progressive failure. <i>Composites Part B: Engineering</i>, <i>224</i>, Article 109209. <a href=\"https://doi.org/10.1016/j.compositesb.2021.109209\">https://doi.org/10.1016/j.compositesb.2021.109209</a>","ieee":"C. Cheng <i>et al.</i>, “Non-linear mean-field modelling of UD composite laminates accounting for average asymmetric plasticity of the matrix, debonding and progressive failure,” <i>Composites Part B: Engineering</i>, vol. 224, Art. no. 109209, 2021, doi: <a href=\"https://doi.org/10.1016/j.compositesb.2021.109209\">10.1016/j.compositesb.2021.109209</a>."},"quality_controlled":"1"},{"volume":2018,"user_id":"11829","_id":"6567","page":"478-486","status":"public","project":[{"name":"Computing Resources Provided by the Paderborn Center for Parallel Computing","_id":"52"},{"name":"Ermittlung des hydrothermischen Alterungsverhaltens endlosfaserverstärkter Thermoplaste und Entwicklung eines ultraschallbasierten Messsystems zur zerstörungsfreien Charakterisierung des Alterungszustands für die Komponentenüberwachung und Restlebenszeitprädiktion","_id":"88","grant_number":"260306237"}],"quality_controlled":"1","citation":{"short":"S. Johannesmann, J. Düchting, M. Webersen, L. Claes, B. Henning, Tm - Technisches Messen 2018 (2018) 478–486.","chicago":"Johannesmann, Sarah, Julia Düchting, Manuel Webersen, Leander Claes, and Bernd Henning. “An Acoustic Waveguide-Based Approach to the Complete Characterisation of Linear Elastic, Orthotropic Material Behaviour.” <i>Tm - Technisches Messen</i> 2018, no. 85 (2018): 478–86. <a href=\"https://doi.org/10.1515/teme-2017-0132\">https://doi.org/10.1515/teme-2017-0132</a>.","apa":"Johannesmann, S., Düchting, J., Webersen, M., Claes, L., &#38; Henning, B. (2018). An acoustic waveguide-based approach to the complete characterisation of linear elastic, orthotropic material behaviour. <i>Tm - Technisches Messen</i>, <i>2018</i>(85), 478–486. <a href=\"https://doi.org/10.1515/teme-2017-0132\">https://doi.org/10.1515/teme-2017-0132</a>","ieee":"S. Johannesmann, J. Düchting, M. Webersen, L. Claes, and B. Henning, “An acoustic waveguide-based approach to the complete characterisation of linear elastic, orthotropic material behaviour,” <i>tm - Technisches Messen</i>, vol. 2018, no. 85, pp. 478–486, 2018.","ama":"Johannesmann S, Düchting J, Webersen M, Claes L, Henning B. An acoustic waveguide-based approach to the complete characterisation of linear elastic, orthotropic material behaviour. <i>tm - Technisches Messen</i>. 2018;2018(85):478-486. doi:<a href=\"https://doi.org/10.1515/teme-2017-0132\">10.1515/teme-2017-0132</a>","bibtex":"@article{Johannesmann_Düchting_Webersen_Claes_Henning_2018, title={An acoustic waveguide-based approach to the complete characterisation of linear elastic, orthotropic material behaviour}, volume={2018}, DOI={<a href=\"https://doi.org/10.1515/teme-2017-0132\">10.1515/teme-2017-0132</a>}, number={85}, journal={tm - Technisches Messen}, author={Johannesmann, Sarah and Düchting, Julia and Webersen, Manuel and Claes, Leander and Henning, Bernd}, year={2018}, pages={478–486} }","mla":"Johannesmann, Sarah, et al. “An Acoustic Waveguide-Based Approach to the Complete Characterisation of Linear Elastic, Orthotropic Material Behaviour.” <i>Tm - Technisches Messen</i>, vol. 2018, no. 85, 2018, pp. 478–86, doi:<a href=\"https://doi.org/10.1515/teme-2017-0132\">10.1515/teme-2017-0132</a>."},"doi":"10.1515/teme-2017-0132","language":[{"iso":"eng"}],"intvolume":"      2018","date_updated":"2022-01-06T07:03:12Z","author":[{"id":"29190","full_name":"Johannesmann, Sarah","last_name":"Johannesmann","first_name":"Sarah"},{"first_name":"Julia","last_name":"Düchting","full_name":"Düchting, Julia"},{"full_name":"Webersen, Manuel","last_name":"Webersen","first_name":"Manuel","orcid":"0000-0001-6411-4232","id":"11289"},{"first_name":"Leander","orcid":"0000-0002-4393-268X","last_name":"Claes","full_name":"Claes, Leander","id":"11829"},{"first_name":"Bernd","last_name":"Henning","full_name":"Henning, Bernd","id":"213"}],"publication_identifier":{"issn":["0171-8096"]},"title":"An acoustic waveguide-based approach to the complete characterisation of linear elastic, orthotropic material behaviour","year":"2018","department":[{"_id":"49"}],"keyword":["Continous-fibre reinforced plastics","material parameters","orthotropy","ultrasonics"],"type":"journal_article","date_created":"2019-01-09T14:37:15Z","issue":"85","publication":"tm - Technisches Messen"}]