---
_id: '55743'
abstract:
- lang: eng
  text: The use of hybrid materials as a combination of fibre-reinforced plastic (FRP)
    and metal is of great interest in order to meet the increasing demands for sustainability,
    efficiency, and emission reduction based on the principle of lightweight design.
    These two components can therefore be joined using the intrinsic joining technique,
    which is formed by curing the matrix of the FRP component. In this study, for
    the hybrid joint, unidirectionally pre-impregnated semi-finished products (prepregs)
    with duromer matrix resin and micro-alloyed HC340LA steel were used. In order
    to conduct a detailed investigation, the damage mechanisms of intrinsically produced
    fibre metal laminates (FMLs), a new clamping device, and a novel pressing tool
    were designed and put into operation. The prepregs were prestressed by applying
    a preloading force using a specially designed prestressing frame. Hybrid specimens
    were then produced and subjected to nanoindentation and a shear tensile test.
    In particular, the effect of the residual stress state by varying the defined
    prestressing force on the damage mechanisms was studied. The results showed that
    no fracture patterns occurred in the interface of the specimens without preloading
    as a result of curing at 120 °C, whereas specimens with preloading failed at the
    boundary layer in the tensile range. Nevertheless, all specimens cured at 160
    °C failed at the boundary layer in the tensile range. Furthermore, it was proven
    that the force and displacement of the preloaded specimens were promisingly higher
    than those of the unpreloaded specimens.
article_number: '316'
article_type: original
author:
- first_name: Hayrettin
  full_name: Irmak, Hayrettin
  id: '75657'
  last_name: Irmak
  orcid: https://orcid.org/0009-0009-6267-2957
- first_name: Steffen Rainer
  full_name: Tinkloh, Steffen Rainer
  id: '72722'
  last_name: Tinkloh
- first_name: Thorsten
  full_name: Marten, Thorsten
  id: '338'
  last_name: Marten
  orcid: 0009-0001-6433-7839
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
citation:
  ama: Irmak H, Tinkloh SR, Marten T, Tröster T. Development of a Tool Concept for
    Prestressed Fibre Metal Laminates and Their Effect on Interface Failure. <i>Journal
    of Composites Science</i>. 2024;8(8). doi:<a href="https://doi.org/10.3390/jcs8080316">10.3390/jcs8080316</a>
  apa: Irmak, H., Tinkloh, S. R., Marten, T., &#38; Tröster, T. (2024). Development
    of a Tool Concept for Prestressed Fibre Metal Laminates and Their Effect on Interface
    Failure. <i>Journal of Composites Science</i>, <i>8</i>(8), Article 316. <a href="https://doi.org/10.3390/jcs8080316">https://doi.org/10.3390/jcs8080316</a>
  bibtex: '@article{Irmak_Tinkloh_Marten_Tröster_2024, title={Development of a Tool
    Concept for Prestressed Fibre Metal Laminates and Their Effect on Interface Failure},
    volume={8}, DOI={<a href="https://doi.org/10.3390/jcs8080316">10.3390/jcs8080316</a>},
    number={8316}, journal={Journal of Composites Science}, publisher={MDPI AG}, author={Irmak,
    Hayrettin and Tinkloh, Steffen Rainer and Marten, Thorsten and Tröster, Thomas},
    year={2024} }'
  chicago: Irmak, Hayrettin, Steffen Rainer Tinkloh, Thorsten Marten, and Thomas Tröster.
    “Development of a Tool Concept for Prestressed Fibre Metal Laminates and Their
    Effect on Interface Failure.” <i>Journal of Composites Science</i> 8, no. 8 (2024).
    <a href="https://doi.org/10.3390/jcs8080316">https://doi.org/10.3390/jcs8080316</a>.
  ieee: 'H. Irmak, S. R. Tinkloh, T. Marten, and T. Tröster, “Development of a Tool
    Concept for Prestressed Fibre Metal Laminates and Their Effect on Interface Failure,”
    <i>Journal of Composites Science</i>, vol. 8, no. 8, Art. no. 316, 2024, doi:
    <a href="https://doi.org/10.3390/jcs8080316">10.3390/jcs8080316</a>.'
  mla: Irmak, Hayrettin, et al. “Development of a Tool Concept for Prestressed Fibre
    Metal Laminates and Their Effect on Interface Failure.” <i>Journal of Composites
    Science</i>, vol. 8, no. 8, 316, MDPI AG, 2024, doi:<a href="https://doi.org/10.3390/jcs8080316">10.3390/jcs8080316</a>.
  short: H. Irmak, S.R. Tinkloh, T. Marten, T. Tröster, Journal of Composites Science
    8 (2024).
date_created: 2024-08-23T06:47:27Z
date_updated: 2026-03-23T10:31:09Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.3390/jcs8080316
intvolume: '         8'
issue: '8'
keyword:
- CFRP
- prestressing
- fibre metal laminate
- interface
- prepreg
- shear tensile test
language:
- iso: eng
publication: Journal of Composites Science
publication_identifier:
  issn:
  - 2504-477X
publication_status: published
publisher: MDPI AG
quality_controlled: '1'
status: public
title: Development of a Tool Concept for Prestressed Fibre Metal Laminates and Their
  Effect on Interface Failure
type: journal_article
user_id: '338'
volume: 8
year: '2024'
...
---
_id: '23431'
abstract:
- lang: eng
  text: As an effective and accurate method for modelling composite materials, mean-field
    homogenization is still not well studied in modelling non-linear and damage behaviours
    of UD composites. Investigated micro FE-simulations show that the matrix of UD
    composites exhibits different average plastic behaviour, named as average asymmetric
    matrix plasticity (AAMP), when the composite behaves different under shear, longitudinal
    and transverse loadings. In this study, a non-linear mean-field debonding model
    (NMFDM) combining a mean-field model and a fibre–matrix interface debonding model,
    is developed to simulate UD composites under consideration of AAMP, fibre–matrix
    interface damage and progressive failure. AAMP is considered by using so-called
    stress mode factor, which is expressed in terms of basic invariants of the matrix
    deviatoric stress tensor and is used as an indicator for detection of differences
    in the loading mode. The material behaviour of UD composites with imperfect interface
    is assumed identical as for perfect interface and stiffness reduced fibres. Progressive
    failure criteria are established with consideration of fibre breakage and matrix
    crack for different fibre orientations. As a representative example for the NMFDM,
    a C30/E201 UD composite is studied. To verify the model, experiments are conducted
    on polymers, carbon fibres and UD CFRPs. Finally, the model is applied to simulate
    a perforated CFRP laminate, which shows excellent prediction ability on deformation,
    debonding and progressive failure.
article_number: '109209'
author:
- first_name: C.
  full_name: Cheng, C.
  last_name: Cheng
- first_name: Z.
  full_name: Wang, Z.
  last_name: Wang
- first_name: Z.
  full_name: Jin, Z.
  last_name: Jin
- first_name: X.
  full_name: Ju, X.
  last_name: Ju
- first_name: Swetlana
  full_name: Schweizer, Swetlana
  id: '8938'
  last_name: Schweizer
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
- first_name: Rolf
  full_name: Mahnken, Rolf
  id: '335'
  last_name: Mahnken
citation:
  ama: 'Cheng C, Wang Z, Jin Z, et al. Non-linear mean-field modelling of UD composite
    laminates accounting for average asymmetric plasticity of the matrix, debonding
    and progressive failure. <i>Composites Part B: Engineering</i>. 2021;224. doi:<a
    href="https://doi.org/10.1016/j.compositesb.2021.109209">10.1016/j.compositesb.2021.109209</a>'
  apa: 'Cheng, C., Wang, Z., Jin, Z., Ju, X., Schweizer, S., Tröster, T., &#38; Mahnken,
    R. (2021). Non-linear mean-field modelling of UD composite laminates accounting
    for average asymmetric plasticity of the matrix, debonding and progressive failure.
    <i>Composites Part B: Engineering</i>, <i>224</i>, Article 109209. <a href="https://doi.org/10.1016/j.compositesb.2021.109209">https://doi.org/10.1016/j.compositesb.2021.109209</a>'
  bibtex: '@article{Cheng_Wang_Jin_Ju_Schweizer_Tröster_Mahnken_2021, title={Non-linear
    mean-field modelling of UD composite laminates accounting for average asymmetric
    plasticity of the matrix, debonding and progressive failure}, volume={224}, DOI={<a
    href="https://doi.org/10.1016/j.compositesb.2021.109209">10.1016/j.compositesb.2021.109209</a>},
    number={109209}, journal={Composites Part B: Engineering}, author={Cheng, C. and
    Wang, Z. and Jin, Z. and Ju, X. and Schweizer, Swetlana and Tröster, Thomas and
    Mahnken, Rolf}, year={2021} }'
  chicago: 'Cheng, C., Z. Wang, Z. Jin, X. Ju, Swetlana Schweizer, Thomas Tröster,
    and Rolf Mahnken. “Non-Linear Mean-Field Modelling of UD Composite Laminates Accounting
    for Average Asymmetric Plasticity of the Matrix, Debonding and Progressive Failure.”
    <i>Composites Part B: Engineering</i> 224 (2021). <a href="https://doi.org/10.1016/j.compositesb.2021.109209">https://doi.org/10.1016/j.compositesb.2021.109209</a>.'
  ieee: 'C. Cheng <i>et al.</i>, “Non-linear mean-field modelling of UD composite
    laminates accounting for average asymmetric plasticity of the matrix, debonding
    and progressive failure,” <i>Composites Part B: Engineering</i>, vol. 224, Art.
    no. 109209, 2021, doi: <a href="https://doi.org/10.1016/j.compositesb.2021.109209">10.1016/j.compositesb.2021.109209</a>.'
  mla: 'Cheng, C., et al. “Non-Linear Mean-Field Modelling of UD Composite Laminates
    Accounting for Average Asymmetric Plasticity of the Matrix, Debonding and Progressive
    Failure.” <i>Composites Part B: Engineering</i>, vol. 224, 109209, 2021, doi:<a
    href="https://doi.org/10.1016/j.compositesb.2021.109209">10.1016/j.compositesb.2021.109209</a>.'
  short: 'C. Cheng, Z. Wang, Z. Jin, X. Ju, S. Schweizer, T. Tröster, R. Mahnken,
    Composites Part B: Engineering 224 (2021).'
date_created: 2021-08-18T06:20:21Z
date_updated: 2025-06-06T08:08:32Z
department:
- _id: '9'
- _id: '154'
- _id: '321'
- _id: '149'
doi: 10.1016/j.compositesb.2021.109209
intvolume: '       224'
keyword:
- Non-linear mean-field homogenization Average asymmetric plasticity of matrix Fibre–matrix
  interface debonding Micro-mechanical FE-simulation Progressive failure
language:
- iso: eng
publication: 'Composites Part B: Engineering'
publication_identifier:
  issn:
  - 1359-8368
publication_status: published
quality_controlled: '1'
status: public
title: Non-linear mean-field modelling of UD composite laminates accounting for average
  asymmetric plasticity of the matrix, debonding and progressive failure
type: journal_article
user_id: '15952'
volume: 224
year: '2021'
...
---
_id: '9899'
abstract:
- lang: eng
  text: Bainite is a steel microstructure consisting of three phases, bainitic ferrite,
    austenite and carbides. It forms in two different morphologies, upper and lower
    bainite, where different diffusion mechanisms are dominant. The aim of this work
    is to simulate both transformations within a unified model. To this end, we extend
    an own previously published model for lower bainite with diffusion across the
    phase interface. As a central idea we introduce weighted Helmholtz energy functions
    and a weighted mobility tensor, respectively. The individual Helmholtz energy
    functions and mobility terms are related to the different diffusion mechanisms
    which are responsible for the formation of both morphologies. Two representative
    examples illustrate the capability of the coupled phase field/diffusion model
    and show the expected behaviour.
author:
- first_name: M.
  full_name: Düsing, M.
  last_name: Düsing
- first_name: R.
  full_name: Mahnken, R.
  last_name: Mahnken
citation:
  ama: Düsing M, Mahnken R. „A coupled phase field/diffusion model for upper and lower
    bainitic transformation”. <i>International Journal of Solids and Structures</i>.
    2018;135:172-183.
  apa: Düsing, M., &#38; Mahnken, R. (2018). „A coupled phase field/diffusion model
    for upper and lower bainitic transformation”. <i>International Journal of Solids
    and Structures</i>, <i>135</i>, 172–183.
  bibtex: '@article{Düsing_Mahnken_2018, title={„A coupled phase field/diffusion model
    for upper and lower bainitic transformation”}, volume={135}, journal={International
    Journal of Solids and Structures}, publisher={Elsevier}, author={Düsing, M. and
    Mahnken, R.}, year={2018}, pages={172–183} }'
  chicago: 'Düsing, M., and R. Mahnken. “„A Coupled Phase Field/Diffusion Model for
    Upper and Lower Bainitic Transformation”.” <i>International Journal of Solids
    and Structures</i> 135 (2018): 172–83.'
  ieee: M. Düsing and R. Mahnken, “„A coupled phase field/diffusion model for upper
    and lower bainitic transformation”,” <i>International Journal of Solids and Structures</i>,
    vol. 135, pp. 172–183, 2018.
  mla: Düsing, M., and R. Mahnken. “„A Coupled Phase Field/Diffusion Model for Upper
    and Lower Bainitic Transformation”.” <i>International Journal of Solids and Structures</i>,
    vol. 135, Elsevier, 2018, pp. 172–83.
  short: M. Düsing, R. Mahnken, International Journal of Solids and Structures 135
    (2018) 172–183.
date_created: 2019-05-21T13:03:05Z
date_updated: 2019-05-21T13:12:27Z
department:
- _id: '154'
intvolume: '       135'
keyword:
- Coupled phase field/diffusion model
- Bainite
- Multiphase field method
- Cahn–Hilliard diffusion
- Diffusion across the interface
- Lower bainitic transformation
- Upper bainitic transformation
- Thermodynamic framework
- Microforce balance
language:
- iso: eng
page: 172-183
publication: International Journal of Solids and Structures
publication_identifier:
  issn:
  - 0020-7683
publication_status: published
publisher: Elsevier
status: public
title: „A coupled phase field/diffusion model for upper and lower bainitic transformation”
type: journal_article
user_id: '78813'
volume: 135
year: '2018'
...
---
_id: '5829'
abstract:
- lang: eng
  text: Websites increasingly embed semantic data for search engine optimization.
    The most common ontology for semantic data, schema.org, is supported by all major
    search engines and describes over 500 data types, including calendar events, recipes,
    products, and TV shows. As of today, users wishing to pass this data to their
    favorite applications, e.g., their calendars, cookbooks, price comparison applications
    or even smart devices such as TV receivers, rely on cumbersome and error-prone
    workarounds such as reentering the data or a series of copy and paste operations.
    In this paper, we present Semantic Data Mediator (SDM), an approach that allows
    the easy transfer of semantic data to a multitude of services, ranging from web
    services to applications installed on different devices. SDM extracts semantic
    data from the currently displayed web page on the client-side, offers suitable
    services to the user, and by the press of a button, forwards this data to the
    desired service while doing all the necessary data conversion and service interface
    adaptation in between. To realize this, we built a reusable repository of service
    descriptions, data converters, and service adapters, which can be extended by
    the crowd. Our approach for linking services to websites relies solely on semantic
    data and does not require any additional support by either website or service
    developers. We have fully implemented our approach and present a real-world case
    study demonstrating its feasibility and usefulness.
author:
- first_name: Dennis
  full_name: Wolters, Dennis
  id: '11308'
  last_name: Wolters
- first_name: Stefan
  full_name: Heindorf, Stefan
  id: '11871'
  last_name: Heindorf
  orcid: 0000-0002-4525-6865
- first_name: Jonas
  full_name: Kirchhoff, Jonas
  id: '39928'
  last_name: Kirchhoff
- first_name: Gregor
  full_name: Engels, Gregor
  id: '107'
  last_name: Engels
citation:
  ama: 'Wolters D, Heindorf S, Kirchhoff J, Engels G. Linking Services to Websites
    by Leveraging Semantic Data. In: Altintas I, Chen S, eds. <i>2017 IEEE International
    Conference on Web Services (ICWS)</i>. IEEE; 2017. doi:<a href="https://doi.org/10.1109/icws.2017.80">10.1109/icws.2017.80</a>'
  apa: Wolters, D., Heindorf, S., Kirchhoff, J., &#38; Engels, G. (2017). Linking
    Services to Websites by Leveraging Semantic Data. In I. Altintas &#38; S. Chen
    (Eds.), <i>2017 IEEE International Conference on Web Services (ICWS)</i>. IEEE.
    <a href="https://doi.org/10.1109/icws.2017.80">https://doi.org/10.1109/icws.2017.80</a>
  bibtex: '@inproceedings{Wolters_Heindorf_Kirchhoff_Engels_2017, title={Linking Services
    to Websites by Leveraging Semantic Data}, DOI={<a href="https://doi.org/10.1109/icws.2017.80">10.1109/icws.2017.80</a>},
    booktitle={2017 IEEE International Conference on Web Services (ICWS)}, publisher={IEEE},
    author={Wolters, Dennis and Heindorf, Stefan and Kirchhoff, Jonas and Engels,
    Gregor}, editor={Altintas, Ilkay and Chen, Shiping}, year={2017} }'
  chicago: Wolters, Dennis, Stefan Heindorf, Jonas Kirchhoff, and Gregor Engels. “Linking
    Services to Websites by Leveraging Semantic Data.” In <i>2017 IEEE International
    Conference on Web Services (ICWS)</i>, edited by Ilkay Altintas and Shiping Chen.
    IEEE, 2017. <a href="https://doi.org/10.1109/icws.2017.80">https://doi.org/10.1109/icws.2017.80</a>.
  ieee: 'D. Wolters, S. Heindorf, J. Kirchhoff, and G. Engels, “Linking Services to
    Websites by Leveraging Semantic Data,” in <i>2017 IEEE International Conference
    on Web Services (ICWS)</i>, 2017, doi: <a href="https://doi.org/10.1109/icws.2017.80">10.1109/icws.2017.80</a>.'
  mla: Wolters, Dennis, et al. “Linking Services to Websites by Leveraging Semantic
    Data.” <i>2017 IEEE International Conference on Web Services (ICWS)</i>, edited
    by Ilkay Altintas and Shiping Chen, IEEE, 2017, doi:<a href="https://doi.org/10.1109/icws.2017.80">10.1109/icws.2017.80</a>.
  short: 'D. Wolters, S. Heindorf, J. Kirchhoff, G. Engels, in: I. Altintas, S. Chen
    (Eds.), 2017 IEEE International Conference on Web Services (ICWS), IEEE, 2017.'
date_created: 2018-11-26T11:49:31Z
date_updated: 2022-10-15T20:01:55Z
department:
- _id: '66'
doi: 10.1109/icws.2017.80
editor:
- first_name: Ilkay
  full_name: Altintas, Ilkay
  last_name: Altintas
- first_name: Shiping
  full_name: Chen, Shiping
  last_name: Chen
keyword:
- Services
- Websites
- Semantic Data
- schema.org
- Data Conversion
- Interface Adaptation
- Mediation
language:
- iso: eng
main_file_link:
- open_access: '1'
  url: https://cs.uni-paderborn.de/fileadmin/informatik/fg/dbis/Publikationen/2017/wolters2017_ICWS.pdf
oa: '1'
publication: 2017 IEEE International Conference on Web Services (ICWS)
publication_identifier:
  isbn:
  - '9781538607527'
publication_status: published
publisher: IEEE
status: public
title: Linking Services to Websites by Leveraging Semantic Data
type: conference
user_id: '11871'
year: '2017'
...
---
_id: '10677'
author:
- first_name: Nam
  full_name: Ho, Nam
  last_name: Ho
- first_name: Paul
  full_name: Kaufmann, Paul
  last_name: Kaufmann
- first_name: Marco
  full_name: Platzner, Marco
  id: '398'
  last_name: Platzner
citation:
  ama: 'Ho N, Kaufmann P, Platzner M. Towards self-adaptive caches: A run-time reconfigurable
    multi-core infrastructure. In: <i>2014 {IEEE} Intl. Conf. on Evolvable Systems
    (ICES)</i>. ; 2014:31-37. doi:<a href="https://doi.org/10.1109/ICES.2014.7008719">10.1109/ICES.2014.7008719</a>'
  apa: 'Ho, N., Kaufmann, P., &#38; Platzner, M. (2014). Towards self-adaptive caches:
    A run-time reconfigurable multi-core infrastructure. In <i>2014 {IEEE} Intl. Conf.
    on Evolvable Systems (ICES)</i> (pp. 31–37). <a href="https://doi.org/10.1109/ICES.2014.7008719">https://doi.org/10.1109/ICES.2014.7008719</a>'
  bibtex: '@inproceedings{Ho_Kaufmann_Platzner_2014, title={Towards self-adaptive
    caches: A run-time reconfigurable multi-core infrastructure}, DOI={<a href="https://doi.org/10.1109/ICES.2014.7008719">10.1109/ICES.2014.7008719</a>},
    booktitle={2014 {IEEE} Intl. Conf. on Evolvable Systems (ICES)}, author={Ho, Nam
    and Kaufmann, Paul and Platzner, Marco}, year={2014}, pages={31–37} }'
  chicago: 'Ho, Nam, Paul Kaufmann, and Marco Platzner. “Towards Self-Adaptive Caches:
    A Run-Time Reconfigurable Multi-Core Infrastructure.” In <i>2014 {IEEE} Intl.
    Conf. on Evolvable Systems (ICES)</i>, 31–37, 2014. <a href="https://doi.org/10.1109/ICES.2014.7008719">https://doi.org/10.1109/ICES.2014.7008719</a>.'
  ieee: 'N. Ho, P. Kaufmann, and M. Platzner, “Towards self-adaptive caches: A run-time
    reconfigurable multi-core infrastructure,” in <i>2014 {IEEE} Intl. Conf. on Evolvable
    Systems (ICES)</i>, 2014, pp. 31–37.'
  mla: 'Ho, Nam, et al. “Towards Self-Adaptive Caches: A Run-Time Reconfigurable Multi-Core
    Infrastructure.” <i>2014 {IEEE} Intl. Conf. on Evolvable Systems (ICES)</i>, 2014,
    pp. 31–37, doi:<a href="https://doi.org/10.1109/ICES.2014.7008719">10.1109/ICES.2014.7008719</a>.'
  short: 'N. Ho, P. Kaufmann, M. Platzner, in: 2014 {IEEE} Intl. Conf. on Evolvable
    Systems (ICES), 2014, pp. 31–37.'
date_created: 2019-07-10T11:23:00Z
date_updated: 2022-01-06T06:50:49Z
department:
- _id: '78'
doi: 10.1109/ICES.2014.7008719
keyword:
- Linux
- cache storage
- embedded systems
- granular computing
- multiprocessing systems
- reconfigurable architectures
- Leon3 SPARe processor
- custom logic events
- evolvable-self-adaptable processor cache
- fine granular profiling
- integer unit events
- measurement infrastructure
- microarchitectural events
- multicore embedded system
- perf_event standard Linux performance measurement interface
- processor properties
- run-time reconfigurable memory-to-cache address mapping engine
- run-time reconfigurable multicore infrastructure
- split-level caching
- Field programmable gate arrays
- Frequency locked loops
- Irrigation
- Phasor measurement units
- Registers
- Weaving
language:
- iso: eng
page: 31-37
publication: 2014 {IEEE} Intl. Conf. on Evolvable Systems (ICES)
status: public
title: 'Towards self-adaptive caches: A run-time reconfigurable multi-core infrastructure'
type: conference
user_id: '3118'
year: '2014'
...
---
_id: '37046'
abstract:
- lang: eng
  text: In this article, we present a flexible simulation environment for embedded
    real-time software refinement by a mixed level cosimulation. For this, we combine
    the native speed of an abstract real-time operating system (RTOS) model in SystemC
    with dynamic binary translation for fast Instruction Set Simulation (ISS) by QEMU.
    In order to support stepwise RTOS software refinement from system level to the
    target software, each task can be separately migrated between the native execution
    and the ISS. By adapting the dynamic binary translation approach to an efficient
    but yet very accurate synchronization scheme the overhead of QEMU user mode execution
    is only factor two compared to native SystemC. Furthermore, the simulation speed
    increases almost linearly according to the utilization of the task set abstracted
    by the native execution. Hereby, the simulation time can be considerably reduced
    by cosimulating just a subset of tasks on QEMU.
author:
- first_name: Markus
  full_name: Becker, Markus
  last_name: Becker
- first_name: Henning
  full_name: Zabel, Henning
  last_name: Zabel
- first_name: Wolfgang
  full_name: Müller, Wolfgang
  id: '16243'
  last_name: Müller
citation:
  ama: 'Becker M, Zabel H, Müller W. A Mixed Level Simulation Environment for Stepwise
    RTOS Software Refinement. In: Kleinjohann L, Kleinjohann B, eds. Springer Verlag;
    2010. doi:<a href="https://doi.org/10.1007/978-3-642-15234-4_15">10.1007/978-3-642-15234-4_15</a>'
  apa: Becker, M., Zabel, H., &#38; Müller, W. (2010). <i>A Mixed Level Simulation
    Environment for Stepwise RTOS Software Refinement</i> (L. Kleinjohann &#38; B.
    Kleinjohann, Eds.). Springer Verlag. <a href="https://doi.org/10.1007/978-3-642-15234-4_15">https://doi.org/10.1007/978-3-642-15234-4_15</a>
  bibtex: '@inproceedings{Becker_Zabel_Müller_2010, place={Dordrecht}, title={A Mixed
    Level Simulation Environment for Stepwise RTOS Software Refinement}, DOI={<a href="https://doi.org/10.1007/978-3-642-15234-4_15">10.1007/978-3-642-15234-4_15</a>},
    publisher={Springer Verlag}, author={Becker, Markus and Zabel, Henning and Müller,
    Wolfgang}, editor={Kleinjohann, L. and Kleinjohann, B.}, year={2010} }'
  chicago: 'Becker, Markus, Henning Zabel, and Wolfgang Müller. “A Mixed Level Simulation
    Environment for Stepwise RTOS Software Refinement.” edited by L. Kleinjohann and
    B. Kleinjohann. Dordrecht: Springer Verlag, 2010. <a href="https://doi.org/10.1007/978-3-642-15234-4_15">https://doi.org/10.1007/978-3-642-15234-4_15</a>.'
  ieee: 'M. Becker, H. Zabel, and W. Müller, “A Mixed Level Simulation Environment
    for Stepwise RTOS Software Refinement,” 2010, doi: <a href="https://doi.org/10.1007/978-3-642-15234-4_15">10.1007/978-3-642-15234-4_15</a>.'
  mla: Becker, Markus, et al. <i>A Mixed Level Simulation Environment for Stepwise
    RTOS Software Refinement</i>. Edited by L. Kleinjohann and B. Kleinjohann, Springer
    Verlag, 2010, doi:<a href="https://doi.org/10.1007/978-3-642-15234-4_15">10.1007/978-3-642-15234-4_15</a>.
  short: 'M. Becker, H. Zabel, W. Müller, in: L. Kleinjohann, B. Kleinjohann (Eds.),
    Springer Verlag, Dordrecht, 2010.'
conference:
  name: IFIP Working Conference on Distributed and Parallel Embedded Systems (DIPES
    2010)
date_created: 2023-01-17T11:01:30Z
date_updated: 2023-01-17T11:03:00Z
department:
- _id: '672'
doi: 10.1007/978-3-642-15234-4_15
editor:
- first_name: L.
  full_name: Kleinjohann, L.
  last_name: Kleinjohann
- first_name: B.
  full_name: Kleinjohann, B.
  last_name: Kleinjohann
keyword:
- Application Programming Interface     User Mode     Kernel Space     System Level
  Design     Mixed Level
language:
- iso: eng
place: Dordrecht
publication_identifier:
  isbn:
  - 978-3-642-15233-7
publisher: Springer Verlag
status: public
title: A Mixed Level Simulation Environment for Stepwise RTOS Software Refinement
type: conference
user_id: '5786'
year: '2010'
...
---
_id: '38100'
abstract:
- lang: eng
  text: "Smart Cards are becoming a ubiquitous means for securing\r\na wide range
    of interactive applications. However in many\r\ncases its use is limited for authentication
    purposes only. In\r\nthis paper we extend the use of smart cards for carrying\r\nabstract
    user interface descriptions which can be rendered\r\non different and potentially
    remote clients that in addition\r\ncan support different interaction modalities.
    This adds on\r\nthe one hand to the security since a backend application\r\ncannot
    be used without the UI description, and on the other\r\nhand to the versatility
    of applications, since all devices with\r\na respective renderer for certain modalities
    can be utilized."
author:
- first_name: Robbie
  full_name: Schäfer, Robbie
  last_name: Schäfer
- first_name: Wolfgang
  full_name: Müller, Wolfgang
  id: '16243'
  last_name: Müller
- first_name: Andrés
  full_name: Marin-López, Andrés
  last_name: Marin-López
- first_name: Daniel
  full_name: Díaz-Sánchez, Daniel
  last_name: Díaz-Sánchez
citation:
  ama: 'Schäfer R, Müller W, Marin-López A, Díaz-Sánchez D. Device Independent User
    Interfaces for Smart Cards. In: <i>Proceedings of the 9th International Conference
    on Human Computer Interaction with Mobile Devices and Services (MobileHCI2007)</i>.
    ; 2007.'
  apa: Schäfer, R., Müller, W., Marin-López, A., &#38; Díaz-Sánchez, D. (2007). Device
    Independent User Interfaces for Smart Cards. <i>Proceedings of the 9th International
    Conference on Human Computer Interaction with Mobile Devices and Services (MobileHCI2007)</i>.
  bibtex: '@inproceedings{Schäfer_Müller_Marin-López_Díaz-Sánchez_2007, place={Singapore},
    title={Device Independent User Interfaces for Smart Cards}, booktitle={Proceedings
    of the 9th International Conference on Human Computer Interaction with Mobile
    Devices and Services (MobileHCI2007)}, author={Schäfer, Robbie and Müller, Wolfgang
    and Marin-López, Andrés and Díaz-Sánchez, Daniel}, year={2007} }'
  chicago: Schäfer, Robbie, Wolfgang Müller, Andrés Marin-López, and Daniel Díaz-Sánchez.
    “Device Independent User Interfaces for Smart Cards.” In <i>Proceedings of the
    9th International Conference on Human Computer Interaction with Mobile Devices
    and Services (MobileHCI2007)</i>. Singapore, 2007.
  ieee: R. Schäfer, W. Müller, A. Marin-López, and D. Díaz-Sánchez, “Device Independent
    User Interfaces for Smart Cards,” 2007.
  mla: Schäfer, Robbie, et al. “Device Independent User Interfaces for Smart Cards.”
    <i>Proceedings of the 9th International Conference on Human Computer Interaction
    with Mobile Devices and Services (MobileHCI2007)</i>, 2007.
  short: 'R. Schäfer, W. Müller, A. Marin-López, D. Díaz-Sánchez, in: Proceedings
    of the 9th International Conference on Human Computer Interaction with Mobile
    Devices and Services (MobileHCI2007), Singapore, 2007.'
date_created: 2023-01-23T11:45:55Z
date_updated: 2023-01-23T11:46:05Z
department:
- _id: '672'
keyword:
- Smart Card
- Abstract User Interface
- Device Independence
language:
- iso: eng
place: Singapore
publication: Proceedings of the 9th International Conference on Human Computer Interaction
  with Mobile Devices and Services (MobileHCI2007)
status: public
title: Device Independent User Interfaces for Smart Cards
type: conference
user_id: '5786'
year: '2007'
...
---
_id: '38543'
abstract:
- lang: eng
  text: Today a large variety of mobile interaction devices such as PDAs and mobile
    phones enforce the development of a wide range of user interfaces for each platform.
    The complexity even grows, when multiple interaction devices are used to perform
    the same task and when different modalities have to be supported. We introduce
    a new dialog model for the abstraction of concrete user interfaces with a separate
    advanced control layer for the integration of different modalities. In this context,
    we present the Dialog and Interface Specification Language (DISL), which comes
    with a proof-of-concept implementation.
author:
- first_name: Robbie
  full_name: Schäfer, Robbie
  last_name: Schäfer
- first_name: Steffen
  full_name: Bleul, Steffen
  last_name: Bleul
- first_name: Wolfgang
  full_name: Müller, Wolfgang
  id: '16243'
  last_name: Müller
citation:
  ama: 'Schäfer R, Bleul S, Müller W. Dialog Modelling for Multiple Devices and Multiple
    Interaction Modalities. In: <i>Proceedings of the 5th International Workshop on
    Task Models and Diagrams for User Interface Design (TAMODIA’2006)</i>. ; 2006.
    doi:<a href="https://doi.org/10.1007/978-3-540-70816-2_4">10.1007/978-3-540-70816-2_4</a>'
  apa: Schäfer, R., Bleul, S., &#38; Müller, W. (2006). Dialog Modelling for Multiple
    Devices and Multiple Interaction Modalities. <i>Proceedings of the 5th International
    Workshop on Task Models and Diagrams for User Interface Design (TAMODIA’2006)</i>.
    <a href="https://doi.org/10.1007/978-3-540-70816-2_4">https://doi.org/10.1007/978-3-540-70816-2_4</a>
  bibtex: '@inproceedings{Schäfer_Bleul_Müller_2006, place={Hasselt, Belgium}, title={Dialog
    Modelling for Multiple Devices and Multiple Interaction Modalities}, DOI={<a href="https://doi.org/10.1007/978-3-540-70816-2_4">10.1007/978-3-540-70816-2_4</a>},
    booktitle={Proceedings of the 5th International Workshop on Task Models and Diagrams
    for User Interface Design (TAMODIA’2006)}, author={Schäfer, Robbie and Bleul,
    Steffen and Müller, Wolfgang}, year={2006} }'
  chicago: Schäfer, Robbie, Steffen Bleul, and Wolfgang Müller. “Dialog Modelling
    for Multiple Devices and Multiple Interaction Modalities.” In <i>Proceedings of
    the 5th International Workshop on Task Models and Diagrams for User Interface
    Design (TAMODIA’2006)</i>. Hasselt, Belgium, 2006. <a href="https://doi.org/10.1007/978-3-540-70816-2_4">https://doi.org/10.1007/978-3-540-70816-2_4</a>.
  ieee: 'R. Schäfer, S. Bleul, and W. Müller, “Dialog Modelling for Multiple Devices
    and Multiple Interaction Modalities,” 2006, doi: <a href="https://doi.org/10.1007/978-3-540-70816-2_4">10.1007/978-3-540-70816-2_4</a>.'
  mla: Schäfer, Robbie, et al. “Dialog Modelling for Multiple Devices and Multiple
    Interaction Modalities.” <i>Proceedings of the 5th International Workshop on Task
    Models and Diagrams for User Interface Design (TAMODIA’2006)</i>, 2006, doi:<a
    href="https://doi.org/10.1007/978-3-540-70816-2_4">10.1007/978-3-540-70816-2_4</a>.
  short: 'R. Schäfer, S. Bleul, W. Müller, in: Proceedings of the 5th International
    Workshop on Task Models and Diagrams for User Interface Design (TAMODIA’2006),
    Hasselt, Belgium, 2006.'
date_created: 2023-01-24T08:03:51Z
date_updated: 2023-01-24T08:03:56Z
department:
- _id: '672'
doi: 10.1007/978-3-540-70816-2_4
keyword:
- User Interface     Interaction Manager     Output Device     Multimodal Interface     Interaction
  Object
language:
- iso: eng
place: Hasselt, Belgium
publication: Proceedings of the 5th International Workshop on Task Models and Diagrams
  for User Interface Design (TAMODIA'2006)
publication_identifier:
  isbn:
  - 978-3-540-70815-5
status: public
title: Dialog Modelling for Multiple Devices and Multiple Interaction Modalities
type: conference
user_id: '5786'
year: '2006'
...
---
_id: '11931'
abstract:
- lang: eng
  text: The paper is concerned with binaural signal processing for a bimodal human-robot
    interface with hearing and vision. The two microphone signals are processed to
    obtain an enhanced single-channel input signal for the subsequent speech recognizer
    and to localize the acoustic source, an important information for establishing
    a natural human-robot communication. We utilize a robust adaptive algorithm for
    filter-and-sum beamforming (FSB) and extract speaker direction information from
    the resulting FIR filter coefficients. Further, particle filtering is applied
    which conducts a nonlinear Bayesian tracking of speaker movement. Good location
    accuracy can be achieved even in highly reverberant environments. The results
    obtained outperform the conventional generalized cross correlation (GCC) method.
author:
- first_name: Ernst
  full_name: Warsitz, Ernst
  last_name: Warsitz
- first_name: Reinhold
  full_name: Haeb-Umbach, Reinhold
  id: '242'
  last_name: Haeb-Umbach
citation:
  ama: 'Warsitz E, Haeb-Umbach R. Robust speaker direction estimation with particle
    filtering. In: <i>IEEE Workshop on Multimedia Signal Processing (MMSP 2004)</i>.
    ; 2004:367-370. doi:<a href="https://doi.org/10.1109/MMSP.2004.1436569">10.1109/MMSP.2004.1436569</a>'
  apa: Warsitz, E., &#38; Haeb-Umbach, R. (2004). Robust speaker direction estimation
    with particle filtering. In <i>IEEE Workshop on Multimedia Signal Processing (MMSP
    2004)</i> (pp. 367–370). <a href="https://doi.org/10.1109/MMSP.2004.1436569">https://doi.org/10.1109/MMSP.2004.1436569</a>
  bibtex: '@inproceedings{Warsitz_Haeb-Umbach_2004, title={Robust speaker direction
    estimation with particle filtering}, DOI={<a href="https://doi.org/10.1109/MMSP.2004.1436569">10.1109/MMSP.2004.1436569</a>},
    booktitle={IEEE Workshop on Multimedia Signal Processing (MMSP 2004)}, author={Warsitz,
    Ernst and Haeb-Umbach, Reinhold}, year={2004}, pages={367–370} }'
  chicago: Warsitz, Ernst, and Reinhold Haeb-Umbach. “Robust Speaker Direction Estimation
    with Particle Filtering.” In <i>IEEE Workshop on Multimedia Signal Processing
    (MMSP 2004)</i>, 367–70, 2004. <a href="https://doi.org/10.1109/MMSP.2004.1436569">https://doi.org/10.1109/MMSP.2004.1436569</a>.
  ieee: E. Warsitz and R. Haeb-Umbach, “Robust speaker direction estimation with particle
    filtering,” in <i>IEEE Workshop on Multimedia Signal Processing (MMSP 2004)</i>,
    2004, pp. 367–370.
  mla: Warsitz, Ernst, and Reinhold Haeb-Umbach. “Robust Speaker Direction Estimation
    with Particle Filtering.” <i>IEEE Workshop on Multimedia Signal Processing (MMSP
    2004)</i>, 2004, pp. 367–70, doi:<a href="https://doi.org/10.1109/MMSP.2004.1436569">10.1109/MMSP.2004.1436569</a>.
  short: 'E. Warsitz, R. Haeb-Umbach, in: IEEE Workshop on Multimedia Signal Processing
    (MMSP 2004), 2004, pp. 367–370.'
date_created: 2019-07-12T05:31:01Z
date_updated: 2022-01-06T06:51:12Z
department:
- _id: '54'
doi: 10.1109/MMSP.2004.1436569
keyword:
- bimodal human-robot interface
- binaural signal processing
- enhanced single-channel input signal
- filter-and-sum beamforming
- filtering theory
- FIR filter coefficient
- generalized cross correlation method
- microphones
- microphone signal
- nonlinear Bayesian tracking
- particle filtering
- robust adaptive algorithm
- robust speaker direction estimation
- signal processing
- speech enhancement
- speech recognition
- speech recognizer
- user interfaces
language:
- iso: eng
main_file_link:
- open_access: '1'
  url: https://groups.uni-paderborn.de/nt/pubs/2004/WaHa04.pdf
oa: '1'
page: 367-370
publication: IEEE Workshop on Multimedia Signal Processing (MMSP 2004)
status: public
title: Robust speaker direction estimation with particle filtering
type: conference
user_id: '44006'
year: '2004'
...
---
_id: '39350'
abstract:
- lang: eng
  text: Variation in different mobile devices with different capabilities and interaction
    modalities as well as changing user context in nomadic applications, poses huge
    challenges to the design of user interfaces. To avoid multiple designs for each
    device or modality, it is almost a must to employ a model-based approach. In this
    short paper, we present a new dialog model for multimodal interaction together
    with an advanced control model, which can either be used for direct modeling by
    an interface designer or in conjunction with higher level models.
author:
- first_name: Robbie
  full_name: Schäfer, Robbie
  last_name: Schäfer
- first_name: Steffen
  full_name: Bleul, Steffen
  last_name: Bleul
- first_name: Wolfgang
  full_name: Müller, Wolfgang
  id: '16243'
  last_name: Müller
citation:
  ama: 'Schäfer R, Bleul S, Müller W. A Novel Dialog Model for the Design of Multimodal
    User Interfaces. In: <i>Proceedings of EHCI-DSVIS 2005</i>. Lecture Notes in Computer
    Science . ; 2004.'
  apa: Schäfer, R., Bleul, S., &#38; Müller, W. (2004). A Novel Dialog Model for the
    Design of Multimodal User Interfaces. <i>Proceedings of EHCI-DSVIS 2005</i>.
  bibtex: '@inproceedings{Schäfer_Bleul_Müller_2004, place={Tremsbüttel, Hamburg},
    series={Lecture Notes in Computer Science }, title={A Novel Dialog Model for the
    Design of Multimodal User Interfaces}, booktitle={Proceedings of EHCI-DSVIS 2005},
    author={Schäfer, Robbie and Bleul, Steffen and Müller, Wolfgang}, year={2004},
    collection={Lecture Notes in Computer Science } }'
  chicago: Schäfer, Robbie, Steffen Bleul, and Wolfgang Müller. “A Novel Dialog Model
    for the Design of Multimodal User Interfaces.” In <i>Proceedings of EHCI-DSVIS
    2005</i>. Lecture Notes in Computer Science . Tremsbüttel, Hamburg, 2004.
  ieee: R. Schäfer, S. Bleul, and W. Müller, “A Novel Dialog Model for the Design
    of Multimodal User Interfaces,” 2004.
  mla: Schäfer, Robbie, et al. “A Novel Dialog Model for the Design of Multimodal
    User Interfaces.” <i>Proceedings of EHCI-DSVIS 2005</i>, 2004.
  short: 'R. Schäfer, S. Bleul, W. Müller, in: Proceedings of EHCI-DSVIS 2005, Tremsbüttel,
    Hamburg, 2004.'
date_created: 2023-01-24T09:26:58Z
date_updated: 2023-01-24T09:27:03Z
department:
- _id: '672'
keyword:
- Multimodal User Interface     High Level Model     Multimodal User     High Level
  Approach     Dialog Model
language:
- iso: eng
place: Tremsbüttel, Hamburg
publication: Proceedings of EHCI-DSVIS 2005
series_title: 'Lecture Notes in Computer Science '
status: public
title: A Novel Dialog Model for the Design of Multimodal User Interfaces
type: conference
user_id: '5786'
year: '2004'
...
