@article{34098,
  author       = {{Yusuf, Maha and LaManna, Jacob M. and Paul, Partha P. and Agyeman-Budu, David N. and Cao, Chuntian and Dunlop, Alison R. and Jansen, Andrew N. and Polzin, Bryant J. and Trask, Stephen E. and Tanim, Tanvir R. and Dufek, Eric J. and Thampy, Vivek and Steinrück, Hans-Georg and Toney, Michael F. and Nelson Weker, Johanna}},
  issn         = {{2666-3864}},
  journal      = {{Cell Reports Physical Science}},
  keywords     = {{General Physics and Astronomy, General Energy, General Engineering, General Materials Science, General Chemistry}},
  number       = {{11}},
  pages        = {{101145}},
  publisher    = {{Elsevier BV}},
  title        = {{{Simultaneous neutron and X-ray tomography for visualization of graphite electrode degradation in fast-charged lithium-ion batteries}}},
  doi          = {{10.1016/j.xcrp.2022.101145}},
  volume       = {{3}},
  year         = {{2022}},
}

@article{34207,
  abstract     = {{AlSi casting alloys combine excellent castability with high strength. Hence, this group of alloys is often used in the automotive sector. The challenge for this application is the brittle character of these alloys which leads to cracks during joint formation when mechanical joining technologies are used. A rise in ductility can be achieved by a considerable increase in the solidification rate which results in grain refinement. High solidification rates can be realized in twin–roll casting (TRC) by water-cooled rolls. Therefore, a hypoeutectic EN AC–AlSi9 (for European Norm - aluminum cast product) is manufactured by the TRC process and analyzed. Subsequently, joining investigations are performed on castings in as-cast and heat-treated condition using the self-piercing riveting process considering the joint formation and the load-bearing capacity. Due to the fine microstructure, the crack initiation can be avoided during joining, while maintaining the joining parameters, especially by specimens in heat treatment conditions. Furthermore, due to the extremely fine microstructure, the load-bearing capacity of the joint can be significantly increased in terms of the maximum load-bearing force and the energy absorbed.}},
  author       = {{Neuser, Moritz and Kappe, Fabian and Ostermeier, Jakob and Krüger, Jan Tobias and Bobbert, Mathias and Meschut, Gerson and Schaper, Mirko and Grydin, Olexandr}},
  issn         = {{1438-1656}},
  journal      = {{Advanced Engineering Materials}},
  keywords     = {{Condensed Matter Physics, General Materials Science}},
  number       = {{10}},
  publisher    = {{Wiley}},
  title        = {{{Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting}}},
  doi          = {{10.1002/adem.202200874}},
  volume       = {{24}},
  year         = {{2022}},
}

@article{34219,
  abstract     = {{Resource-saving and sustainable production is becoming increasingly important regarding social, political and economic aspects, thus making the use of lightweight-construction technologies a current trend. For this reason, multi-material-systems made of high-strength steel and aluminium as well as metal and fibre-reinforced plastics gain in importance. However, different material properties, e.g. stiffness, thermal expansion coefficients or chemical incompatibilities, are challenging for conventional joining technologies. Joining by cold formed pin structures has shown to have high potential for joining multi-material-systems. These pins can be joined either by direct pin pressing into an unperforated joining partner or by caulking, where the pins are inserted through a pre-punched joining partner and the pin head is upset, resulting in a form-fit joint. Usually, cylindrical pins are used for joining. However, non-rotationally symmetrical pin geometries offer the possibility of introducing a predetermined breaking point or reinforcing a connection in the principal force direction. In this work, cylindrical pins as well as non-rotationally symmetrical pin geometries, such as polygonal and oval pin structures, are cold extruded from the sheet metal plane of an HCT590X+Z dual phase steel and joined in the next step with an EN AW-6014 aluminium using direct pin pressing. Since the formation of an undercut has an crucial influence on the joint strength, the investigations will be focused on the resulting joint geometry. In addition, the effect of different pin heights will be examined to analyse the joint formation at different levels of compression of the pin structures. Finally, the joints are evaluated regarding their joint strength in tensile shear tests and cross tension tests. Here the flow resistance of the geometry used as well as the pin height and thus the strain hardening of the pin base during the extrusion of the pins play a decisive role for the shear strength.}},
  author       = {{Römisch, David and Kraus, Martin and Merklein, Marion}},
  issn         = {{1464-4207}},
  journal      = {{Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications}},
  keywords     = {{Mechanical Engineering, General Materials Science}},
  number       = {{6}},
  pages        = {{1187--1202}},
  publisher    = {{SAGE Publications}},
  title        = {{{Investigation of the influence of formed, non-rotationally symmetrical pin geometries and their effect on the joint quality of steel and aluminium sheets by direct pin pressing}}},
  doi          = {{10.1177/14644207221081408}},
  volume       = {{236}},
  year         = {{2022}},
}

@article{34223,
  abstract     = {{In this study, quasi-unidirectional continuous fiber reinforced thermoplastics (CFRTs) are joined with metal sheets via cold formed cylindrical, elliptical and polygonal pin structures which are directly pressed into the CFRT component after local infrared heating. In comparison to already available studies, the unique novelty is the use of non-rotational symmetric pin structures for the CFRT/metal hybrid joining. Thus, a variation in the fiber orientation in the CFRT component as well as a variation in the non-rotational symmetric pins’ orientation in relation to the sample orientation is conducted. The created samples are consequently mechanically tested via single lap shear experiments in a quasi-static state. Finally, the failure behavior of the single lap shear samples is investigated with the help of microscopic images and detailed photographs. In the single lap shear tests, it could be shown that non-rotational symmetric pin structures lead to an increase in maximum testing forces of up to 74% when compared to cylindrical pins. However, when normalized to the pin foot print related joint strength, only one polygonal pin variation showed increased joint strength in comparison to cylindrical pin structures. The investigation of the failure behavior showed two distinct failure modes. The first failure mode was failure of the CFRT component due to an exceedance of the maximum bearing strength of the pin-hole leading to significant damage in the CFRT component. The second failure mode was pin-deflection due to the applied testing load and a subsequent pin extraction from the CFRT component resulting in significantly less visible damage in the CFRT component. Generally, CFRT failure is more likely with a fiber orientation of 0° in relation to the load direction while pin extraction typically occurs with a fiber orientation of 90°. It is assumed that for future investigations, pin structures with an undercutting shape that creates an interlocking joint could counteract the tendency for pin-extraction and consequently lead to increased maximum joint strengths.}},
  author       = {{Popp, Julian and Römisch, David and Merklein, Marion and Drummer, Dietmar}},
  issn         = {{2076-3417}},
  journal      = {{Applied Sciences}},
  keywords     = {{Fluid Flow and Transfer Processes, Computer Science Applications, Process Chemistry and Technology, General Engineering, Instrumentation, General Materials Science}},
  number       = {{10}},
  publisher    = {{MDPI AG}},
  title        = {{{Joining of CFRT/Steel Hybrid Parts via Direct Pressing of Cold Formed Non-Rotational Symmetric Pin Structures}}},
  doi          = {{10.3390/app12104962}},
  volume       = {{12}},
  year         = {{2022}},
}

@article{34642,
  abstract     = {{<jats:title>Abstract</jats:title><jats:p>The influence of ultra-thin SiO<jats:sub>x</jats:sub> plasma deposited films on the corrosion resistance of adhesive films on a laser surface melted 7075 aluminium alloy was investigated by means of complementary techniques in comparison to the just laser surface melted state. Laser surface melting (LSM) was performed using a continuous wave mode at a wavelength of 1064 nm. Ultra-thin plasma polymer films were deposited from a mixture of hexamethyldisilane (HMDSO), oxygen, and argon by means of an audio-frequency glow discharge. The surface morphology and surface chemistry compositions were investigated by employing field emission scanning electron microscopy, energy-dispersive X-ray spectroscopy (EDX), diffuse reflection infrared Fourier transform spectroscopy, and X-ray photoelectron spectroscopy. The corrosion resistance of plasma polymer coated LSM Al-7075 alloy was studied using linear sweep voltammetry and electrochemical impedance spectroscopy in a chloride-containing electrolyte. The electrochemical studies showed an improved corrosion resistance for plasma film-coated alloys compared to the just laser surface melted state. To study the corresponding surface adhesive properties, the samples were coated with an epoxy amine adhesive. 90°-peel test under humid conditions confirmed the improvement of interfacial wet-adhesion corrosion tests showed a strong improvement of the delamination resistance of adhesives caused by the ultra-thin interfacial SiO<jats:sub>x</jats:sub>-films.</jats:p>}},
  author       = {{Varghese, J. and Vieth, P. and Xie, X. and Grundmeier, Guido}},
  issn         = {{2523-3963}},
  journal      = {{SN Applied Sciences}},
  keywords     = {{General Earth and Planetary Sciences, General Physics and Astronomy, General Engineering, General Environmental Science, General Materials Science, General Chemical Engineering}},
  number       = {{1}},
  publisher    = {{Springer Science and Business Media LLC}},
  title        = {{{Enhanced corrosion resistance of epoxy-films on ultra-thin SiOx PECVD film coated laser surface melted Al-alloys}}},
  doi          = {{10.1007/s42452-022-05244-0}},
  volume       = {{5}},
  year         = {{2022}},
}

@article{34649,
  author       = {{Neßlinger, Vanessa and Orive, Alejandro G. and Meinderink, Dennis and Grundmeier, Guido}},
  issn         = {{0021-9797}},
  journal      = {{Journal of Colloid and Interface Science}},
  keywords     = {{Colloid and Surface Chemistry, Surfaces, Coatings and Films, Biomaterials, Electronic, Optical and Magnetic Materials}},
  pages        = {{563--576}},
  publisher    = {{Elsevier BV}},
  title        = {{{Combined in-situ attenuated total reflection-Fourier transform infrared spectroscopy and single molecule force studies of poly(acrylic acid) at electrolyte/oxide interfaces at acidic pH}}},
  doi          = {{10.1016/j.jcis.2022.01.175}},
  volume       = {{615}},
  year         = {{2022}},
}

@article{31241,
  author       = {{Verma, A.K. and Bopp, F. and Finley, J.J. and Jonas, B. and Zrenner, A. and Reuter, Dirk}},
  issn         = {{0022-0248}},
  journal      = {{Journal of Crystal Growth}},
  keywords     = {{Materials Chemistry, Inorganic Chemistry, Condensed Matter Physics}},
  publisher    = {{Elsevier BV}},
  title        = {{{Low Areal Densities of InAs Quantum Dots on GaAs(100) Prepared by Molecular Beam Epitaxy}}},
  doi          = {{10.1016/j.jcrysgro.2022.126715}},
  year         = {{2022}},
}

@article{32764,
  author       = {{Kasse, Robert M. and Geise, Natalie R. and Sebti, Elias and Lim, Kipil and Takacs, Christopher J. and Cao, Chuntian and Steinrück, Hans-Georg and Toney, Michael F.}},
  issn         = {{2574-0962}},
  journal      = {{ACS Applied Energy Materials}},
  keywords     = {{Electrical and Electronic Engineering, Materials Chemistry, Electrochemistry, Energy Engineering and Power Technology, Chemical Engineering (miscellaneous)}},
  number       = {{7}},
  pages        = {{8273--8281}},
  publisher    = {{American Chemical Society (ACS)}},
  title        = {{{Combined Effects of Uniform Applied Pressure and Electrolyte Additives in Lithium-Metal Batteries}}},
  doi          = {{10.1021/acsaem.2c00806}},
  volume       = {{5}},
  year         = {{2022}},
}

@article{32864,
  abstract     = {{The further development of in-mold-assembly (IMA) technologies for structural hybrid components is of great importance for increasing the economic efficiency and thus the application potential. This paper presents an innovative IMA process concept for the manufacturing of bending loaded hybrid components consisting of two outer metal belts and an inner core structure made of glass mat reinforced thermoplastic (GMT). In this process, the core structure, which is provided with stiffening ribs and functional elements, is formed and joined to two metal belts in one single step. For experimental validation of the concept, the development of a prototypic molding tool and the manufacturing of hybrid beams including process parameters are described. Three-point bending tests and optical measurement technologies are used to characterize the failure behavior and mechanical properties of the produced hybrid beams. It was found that the innovative IMA process enables the manufacturing of hybrid components with high energy absorption and low weight in one step. The mass-specific energy absorption is increased by 693 % compared to pure GMT beams.}},
  author       = {{Stallmeister, Tim and Tröster, Thomas}},
  issn         = {{1662-9795}},
  journal      = {{Key Engineering Materials}},
  keywords     = {{Mechanical Engineering, Mechanics of Materials, General Materials Science}},
  pages        = {{1457--1467}},
  publisher    = {{Trans Tech Publications, Ltd.}},
  title        = {{{In-Mold-Assembly of Hybrid Bending Structures by Compression Molding}}},
  doi          = {{10.4028/p-5fxp53}},
  volume       = {{926}},
  year         = {{2022}},
}

@article{32406,
  abstract     = {{<jats:p>The efficient loading of DNA nanostructures with intercalating or groove-binding drugs is an important prerequisite for various applications in drug delivery. However, unambiguous verification and quantification of successful drug loading...</jats:p>}},
  author       = {{Hanke, Marcel and Grundmeier, Guido and Keller, Adrian}},
  issn         = {{2040-3364}},
  journal      = {{Nanoscale}},
  keywords     = {{General Materials Science}},
  pages        = {{11552--11560}},
  publisher    = {{Royal Society of Chemistry (RSC)}},
  title        = {{{Direct visualization of the drug loading of single DNA origami nanostructures by AFM-IR nanospectroscopy}}},
  doi          = {{10.1039/d2nr02701a}},
  volume       = {{14}},
  year         = {{2022}},
}

@article{33090,
  abstract     = {{<jats:title>Abstract</jats:title><jats:p>Heated tool butt welding is a method often used for joining thermoplastics, especially when the components are made out of different materials. The quality of the connection between the components crucially depends on a suitable choice of the parameters of the welding process, such as heating time, temperature, and the precise way how the parts are then welded. Moreover, when different materials are to be joined, the parameter values need to be tailored to the specifics of the respective material. To this end, in this paper, three approaches to tailor the parameter values to optimize the quality of the connection are compared: a heuristic by Potente, statistical experimental design, and Bayesian optimization. With the suitability for practice in mind, a series of experiments are carried out with these approaches, and their capabilities of proposing well-performing parameter values are investigated. As a result, Bayesian optimization is found to yield peak performance, but the costs for optimization are substantial. In contrast, the Potente heuristic does not require any experimentation and recommends parameter values with competitive quality.</jats:p>}},
  author       = {{Gevers, Karina and Tornede, Alexander and Wever, Marcel Dominik and Schöppner, Volker and Hüllermeier, Eyke}},
  issn         = {{0043-2288}},
  journal      = {{Welding in the World}},
  keywords     = {{Metals and Alloys, Mechanical Engineering, Mechanics of Materials}},
  publisher    = {{Springer Science and Business Media LLC}},
  title        = {{{A comparison of heuristic, statistical, and machine learning methods for heated tool butt welding of two different materials}}},
  doi          = {{10.1007/s40194-022-01339-9}},
  year         = {{2022}},
}

@article{33332,
  author       = {{Bopp, Frederik and Rojas, Jonathan and Revenga, Natalia and Riedl, Hubert and Sbresny, Friedrich and Boos, Katarina and Simmet, Tobias and Ahmadi, Arash and Gershoni, David and Kasprzak, Jacek and Ludwig, Arne and Reitzenstein, Stephan and Wieck, Andreas and Reuter, Dirk and Müller, Kai and Finley, Jonathan J.}},
  issn         = {{2511-9044}},
  journal      = {{Advanced Quantum Technologies}},
  keywords     = {{Electrical and Electronic Engineering, Computational Theory and Mathematics, Condensed Matter Physics, Mathematical Physics, Nuclear and High Energy Physics, Electronic, Optical and Magnetic Materials, Statistical and Nonlinear Physics}},
  publisher    = {{Wiley}},
  title        = {{{Quantum Dot Molecule Devices with Optical Control of Charge Status and Electronic Control of Coupling}}},
  doi          = {{10.1002/qute.202200049}},
  year         = {{2022}},
}

@article{33682,
  author       = {{Khazaei, Mohammad and Ranjbar, Ahmad and Kang, Yoon‐Gu and Liang, Yunye and Khaledialidusti, Rasoul and Bae, Soungmin and Raebiger, Hannes and Wang, Vei and Han, Myung Joon and Mizoguchi, Hiroshi and Bahramy, Mohammad S. and Kühne, Thomas and Belosludov, Rodion V. and Ohno, Kaoru and Hosono, Hideo}},
  issn         = {{1616-301X}},
  journal      = {{Advanced Functional Materials}},
  keywords     = {{Electrochemistry, Condensed Matter Physics, Biomaterials, Electronic, Optical and Magnetic Materials}},
  number       = {{20}},
  publisher    = {{Wiley}},
  title        = {{{Electronic Structures of Group III–V Element Haeckelite Compounds: A Novel Family of Semiconductors, Dirac Semimetals, and Topological Insulators}}},
  doi          = {{10.1002/adfm.202110930}},
  volume       = {{32}},
  year         = {{2022}},
}

@article{33676,
  author       = {{Schulze Lammers, Bertram and López-Salas, Nieves and Stein Siena, Julya and Mirhosseini, Hossein and Yesilpinar, Damla and Heske, Julian Joachim and Kühne, Thomas and Fuchs, Harald and Antonietti, Markus and Mönig, Harry}},
  issn         = {{1936-0851}},
  journal      = {{ACS Nano}},
  keywords     = {{General Physics and Astronomy, General Engineering, General Materials Science}},
  number       = {{9}},
  pages        = {{14284--14296}},
  publisher    = {{American Chemical Society (ACS)}},
  title        = {{{Real-Space Identification of Non-Noble Single Atomic Catalytic Sites within Metal-Coordinated Supramolecular Networks}}},
  doi          = {{10.1021/acsnano.2c04439}},
  volume       = {{16}},
  year         = {{2022}},
}

@article{33686,
  author       = {{Elizabeth, Amala and Sahoo, Sudhir K. and Phirke, Himanshu and Kodalle, Tim and Kühne, Thomas and Audinot, Jean-Nicolas and Wirtz, Tom and Redinger, Alex and Kaufmann, Christian A. and Mirhosseini, Hossein and Mönig, Harry}},
  issn         = {{1944-8244}},
  journal      = {{ACS Applied Materials &amp; Interfaces}},
  keywords     = {{General Materials Science}},
  number       = {{29}},
  pages        = {{34101--34112}},
  publisher    = {{American Chemical Society (ACS)}},
  title        = {{{Surface Passivation and Detrimental Heat-Induced Diffusion Effects in RbF-Treated Cu(In,Ga)Se<sub>2</sub> Solar Cell Absorbers}}},
  doi          = {{10.1021/acsami.2c08257}},
  volume       = {{14}},
  year         = {{2022}},
}

@article{33689,
  author       = {{Raghuwanshi, Mohit and Chugh, Manjusha and Sozzi, Giovanna and Kanevce, Ana and Kühne, Thomas and Mirhosseini, Hossein and Wuerz, Roland and Cojocaru‐Mirédin, Oana}},
  issn         = {{0935-9648}},
  journal      = {{Advanced Materials}},
  keywords     = {{Mechanical Engineering, Mechanics of Materials, General Materials Science}},
  number       = {{37}},
  publisher    = {{Wiley}},
  title        = {{{Fingerprints Indicating Superior Properties of Internal Interfaces in Cu(In,Ga)Se            <sub>2</sub>            Thin‐Film Solar Cells}}},
  doi          = {{10.1002/adma.202203954}},
  volume       = {{34}},
  year         = {{2022}},
}

@article{33690,
  author       = {{Ibaceta-Jaña, Josefa and Chugh, Manjusha and Novikov, Alexander S. and Mirhosseini, Hossein and Kühne, Thomas and Szyszka, Bernd and Wagner, Markus R. and Muydinov, Ruslan}},
  issn         = {{1932-7447}},
  journal      = {{The Journal of Physical Chemistry C}},
  keywords     = {{Surfaces, Coatings and Films, Physical and Theoretical Chemistry, General Energy, Electronic, Optical and Magnetic Materials}},
  number       = {{38}},
  pages        = {{16215--16226}},
  publisher    = {{American Chemical Society (ACS)}},
  title        = {{{Do Lead Halide Hybrid Perovskites Have Hydrogen Bonds?}}},
  doi          = {{10.1021/acs.jpcc.2c02984}},
  volume       = {{126}},
  year         = {{2022}},
}

@article{33683,
  author       = {{Lepre, Enrico and Heske, Julian Joachim and Nowakowski, Michal and Scoppola, Ernesto and Zizak, Ivo and Heil, Tobias and Kühne, Thomas and Antonietti, Markus and López-Salas, Nieves and Albero, Josep}},
  issn         = {{2211-2855}},
  journal      = {{Nano Energy}},
  keywords     = {{Electrical and Electronic Engineering, General Materials Science, Renewable Energy, Sustainability and the Environment}},
  publisher    = {{Elsevier BV}},
  title        = {{{Ni-based electrocatalysts for unconventional CO2 reduction reaction to formic acid}}},
  doi          = {{10.1016/j.nanoen.2022.107191}},
  volume       = {{97}},
  year         = {{2022}},
}

@article{33833,
  author       = {{Kim, Sanghoon and Pathak, Sachin and Rhim, Sonny H. and Cha, Jongin and Jekal, Soyoung and Hong, Soon Cheol and Lee, Hyun Hwi and Park, Sung‐Hun and Lee, Han‐Koo and Park, Jae‐Hoon and Lee, Soogil and Steinrück, Hans-Georg and Mehta, Apurva and Wang, Shan X. and Hong, Jongill}},
  issn         = {{2198-3844}},
  journal      = {{Advanced Science}},
  keywords     = {{General Physics and Astronomy, General Engineering, Biochemistry, Genetics and Molecular Biology (miscellaneous), General Materials Science, General Chemical Engineering, Medicine (miscellaneous)}},
  number       = {{24}},
  pages        = {{2201749}},
  publisher    = {{Wiley}},
  title        = {{{Giant Orbital Anisotropy with Strong Spin–Orbit Coupling Established at the Pseudomorphic Interface of the Co/Pd Superlattice}}},
  doi          = {{10.1002/advs.202201749}},
  volume       = {{9}},
  year         = {{2022}},
}

@article{34253,
  abstract     = {{Lightweight construction has increasingly become the focus of scientific research in recent years, not least due to
the constantly increasing fuel price, which is a key factor in the economic viability of many companies. In this
respect, the use of hybrid structures, made of dissimilar materials offers many advantages. However, such hybrid
structures often have undesirable side effects. For example, brittle intermetallic phases are formed when
aluminum and steel are welded. Clinching as a mechanical joining process does not produce such intermetallic
phases since the connection is realized through form and force closure. In this process, a punch passes through
two or more sheets and forms them into a permanent joint in a die. In the present work, the corrosion phenomena
of an aluminum-steel clinched joint have been investigated by both experiments and numerical simulations in
order to explain the superior fatigue behavior of pre-corroded joints. Therefore, the clinched joints have been
corroded by a three-week salt-spray test. In addition, the electric potential and the von Mises stress are calculated
under the assumption of a static loading. The results of both experiments and numerical simulations can explain
the improvement in the fatigue behavior of the corroded specimens. This phenomenon can be attributed to the
accumulation of corrosion products in small gaps between the joined metal sheets.}},
  author       = {{Harzheim, Sven and Ewenz, Lars and Zimmermann, Martina and Wallmersperger, Thomas}},
  issn         = {{2666-3309}},
  journal      = {{Journal of Advanced Joining Processes}},
  keywords     = {{Mechanical Engineering, Mechanics of Materials, Engineering (miscellaneous), Chemical Engineering (miscellaneous)}},
  publisher    = {{Elsevier BV}},
  title        = {{{Corrosion Phenomena and Fatigue Behavior of Clinched Joints: Numerical and Experimental Investigations}}},
  doi          = {{10.1016/j.jajp.2022.100130}},
  volume       = {{6}},
  year         = {{2022}},
}