[{"abstract":[{"text":"Clinching is the manufacturing process of joining two or more metal sheets under high plastic deformation by form and force closure without thermal support and auxiliary parts. Clinch connections are applicable to difficult-to-join hybrid material combinations, such as steel and aluminum. Therefore, this technology is interesting for the application of AISI 304 components, as this material is widely used as a highly formable sheet material. A characteristic feature of AISI 304 is its metastability, i.e., the face-centered cubic (fcc) γ-austenite can transform into a significantly stronger body-centered cubic (bcc) α’-martensite under plastic deformation. This work investigates the effect of heat treatment—a process that involves the formation of an oxidation layer on the sheet surface—on the forming process during joining and the resulting mechanical properties of clinch joints made from AISI 304. For this purpose, different joints made from non-heat treated and heat-treated sheets were examined using classical metallography and advanced SEM techniques, accompanied by further investigations, such as hardness and feritscope measurements. The shear tensile strength was determined, and the fracture behavior of the samples was investigated. Clear influences of heat-treatment-induced surface roughness on the joint geometry and strength were observed.","lang":"eng"}],"publication":"Metals","keyword":["General Materials Science","Metals and Alloys"],"language":[{"iso":"eng"}],"year":"2022","issue":"9","title":"The Influence of Heat Treatment on the Microstructure, Surface Roughness and Shear Tensile Strength of AISI 304 Clinch Joints","publisher":"MDPI AG","date_created":"2022-12-06T19:25:49Z","status":"public","type":"journal_article","article_number":"1514","_id":"34252","project":[{"name":"TRR 285: TRR 285","_id":"130","grant_number":"418701707"},{"name":"TRR 285 - A: TRR 285 - Project Area A","_id":"131"},{"name":"TRR 285 – A04: TRR 285 - Subproject A04","_id":"138"},{"name":"TRR 285 - B: TRR 285 - Project Area B","_id":"132"},{"name":"TRR 285 – B02: TRR 285 - Subproject B02","_id":"141"}],"department":[{"_id":"630"}],"user_id":"14931","intvolume":"        12","citation":{"short":"A.T. Zeuner, L. Ewenz, J. Kalich, S. Schöne, U. Füssel, M. Zimmermann, Metals 12 (2022).","bibtex":"@article{Zeuner_Ewenz_Kalich_Schöne_Füssel_Zimmermann_2022, title={The Influence of Heat Treatment on the Microstructure, Surface Roughness and Shear Tensile Strength of AISI 304 Clinch Joints}, volume={12}, DOI={<a href=\"https://doi.org/10.3390/met12091514\">10.3390/met12091514</a>}, number={91514}, journal={Metals}, publisher={MDPI AG}, author={Zeuner, André Till and Ewenz, Lars and Kalich, Jan and Schöne, Sebastian and Füssel, Uwe and Zimmermann, Martina}, year={2022} }","mla":"Zeuner, André Till, et al. “The Influence of Heat Treatment on the Microstructure, Surface Roughness and Shear Tensile Strength of AISI 304 Clinch Joints.” <i>Metals</i>, vol. 12, no. 9, 1514, MDPI AG, 2022, doi:<a href=\"https://doi.org/10.3390/met12091514\">10.3390/met12091514</a>.","apa":"Zeuner, A. T., Ewenz, L., Kalich, J., Schöne, S., Füssel, U., &#38; Zimmermann, M. (2022). The Influence of Heat Treatment on the Microstructure, Surface Roughness and Shear Tensile Strength of AISI 304 Clinch Joints. <i>Metals</i>, <i>12</i>(9), Article 1514. <a href=\"https://doi.org/10.3390/met12091514\">https://doi.org/10.3390/met12091514</a>","ama":"Zeuner AT, Ewenz L, Kalich J, Schöne S, Füssel U, Zimmermann M. The Influence of Heat Treatment on the Microstructure, Surface Roughness and Shear Tensile Strength of AISI 304 Clinch Joints. <i>Metals</i>. 2022;12(9). doi:<a href=\"https://doi.org/10.3390/met12091514\">10.3390/met12091514</a>","ieee":"A. T. Zeuner, L. Ewenz, J. Kalich, S. Schöne, U. Füssel, and M. Zimmermann, “The Influence of Heat Treatment on the Microstructure, Surface Roughness and Shear Tensile Strength of AISI 304 Clinch Joints,” <i>Metals</i>, vol. 12, no. 9, Art. no. 1514, 2022, doi: <a href=\"https://doi.org/10.3390/met12091514\">10.3390/met12091514</a>.","chicago":"Zeuner, André Till, Lars Ewenz, Jan Kalich, Sebastian Schöne, Uwe Füssel, and Martina Zimmermann. “The Influence of Heat Treatment on the Microstructure, Surface Roughness and Shear Tensile Strength of AISI 304 Clinch Joints.” <i>Metals</i> 12, no. 9 (2022). <a href=\"https://doi.org/10.3390/met12091514\">https://doi.org/10.3390/met12091514</a>."},"publication_identifier":{"issn":["2075-4701"]},"publication_status":"published","doi":"10.3390/met12091514","main_file_link":[{"url":"https://www.mdpi.com/2075-4701/12/9/1514","open_access":"1"}],"oa":"1","date_updated":"2023-01-02T11:04:26Z","volume":12,"author":[{"first_name":"André Till","last_name":"Zeuner","full_name":"Zeuner, André Till"},{"full_name":"Ewenz, Lars","last_name":"Ewenz","first_name":"Lars"},{"last_name":"Kalich","full_name":"Kalich, Jan","first_name":"Jan"},{"full_name":"Schöne, Sebastian","last_name":"Schöne","first_name":"Sebastian"},{"first_name":"Uwe","last_name":"Füssel","full_name":"Füssel, Uwe"},{"full_name":"Zimmermann, Martina","last_name":"Zimmermann","first_name":"Martina"}]},{"main_file_link":[{"url":"https://www.mdpi.com/2504-4494/6/5/122","open_access":"1"}],"doi":"10.3390/jmmp6050122","title":"Robustness Analysis of Pin Joining","date_created":"2022-12-06T19:03:30Z","author":[{"full_name":"Römisch, David","last_name":"Römisch","first_name":"David"},{"last_name":"Zirngibl","full_name":"Zirngibl, Christoph","first_name":"Christoph"},{"full_name":"Schleich, Benjamin","last_name":"Schleich","first_name":"Benjamin"},{"first_name":"Sandro","full_name":"Wartzack, Sandro","last_name":"Wartzack"},{"full_name":"Merklein, Marion","last_name":"Merklein","first_name":"Marion"}],"volume":6,"publisher":"MDPI AG","oa":"1","date_updated":"2023-01-02T11:01:05Z","citation":{"apa":"Römisch, D., Zirngibl, C., Schleich, B., Wartzack, S., &#38; Merklein, M. (2022). Robustness Analysis of Pin Joining. <i>Journal of Manufacturing and Materials Processing</i>, <i>6</i>(5), Article 122. <a href=\"https://doi.org/10.3390/jmmp6050122\">https://doi.org/10.3390/jmmp6050122</a>","bibtex":"@article{Römisch_Zirngibl_Schleich_Wartzack_Merklein_2022, title={Robustness Analysis of Pin Joining}, volume={6}, DOI={<a href=\"https://doi.org/10.3390/jmmp6050122\">10.3390/jmmp6050122</a>}, number={5122}, journal={Journal of Manufacturing and Materials Processing}, publisher={MDPI AG}, author={Römisch, David and Zirngibl, Christoph and Schleich, Benjamin and Wartzack, Sandro and Merklein, Marion}, year={2022} }","mla":"Römisch, David, et al. “Robustness Analysis of Pin Joining.” <i>Journal of Manufacturing and Materials Processing</i>, vol. 6, no. 5, 122, MDPI AG, 2022, doi:<a href=\"https://doi.org/10.3390/jmmp6050122\">10.3390/jmmp6050122</a>.","short":"D. Römisch, C. Zirngibl, B. Schleich, S. Wartzack, M. Merklein, Journal of Manufacturing and Materials Processing 6 (2022).","ieee":"D. Römisch, C. Zirngibl, B. Schleich, S. Wartzack, and M. Merklein, “Robustness Analysis of Pin Joining,” <i>Journal of Manufacturing and Materials Processing</i>, vol. 6, no. 5, Art. no. 122, 2022, doi: <a href=\"https://doi.org/10.3390/jmmp6050122\">10.3390/jmmp6050122</a>.","chicago":"Römisch, David, Christoph Zirngibl, Benjamin Schleich, Sandro Wartzack, and Marion Merklein. “Robustness Analysis of Pin Joining.” <i>Journal of Manufacturing and Materials Processing</i> 6, no. 5 (2022). <a href=\"https://doi.org/10.3390/jmmp6050122\">https://doi.org/10.3390/jmmp6050122</a>.","ama":"Römisch D, Zirngibl C, Schleich B, Wartzack S, Merklein M. Robustness Analysis of Pin Joining. <i>Journal of Manufacturing and Materials Processing</i>. 2022;6(5). doi:<a href=\"https://doi.org/10.3390/jmmp6050122\">10.3390/jmmp6050122</a>"},"intvolume":"         6","year":"2022","issue":"5","publication_status":"published","publication_identifier":{"issn":["2504-4494"]},"language":[{"iso":"eng"}],"article_number":"122","keyword":["Industrial and Manufacturing Engineering","Mechanical Engineering","Mechanics of Materials"],"user_id":"14931","department":[{"_id":"630"}],"project":[{"name":"TRR 285: TRR 285","_id":"130","grant_number":"418701707"},{"name":"TRR 285 - B: TRR 285 - Project Area B","_id":"132"},{"name":"TRR 285 – B05: TRR 285 - Subproject B05","_id":"144"},{"name":"TRR 285 - C: TRR 285 - Project Area C","_id":"133"},{"name":"TRR 285 – C01: TRR 285 - Subproject C01","_id":"145"}],"_id":"34249","status":"public","abstract":[{"lang":"eng","text":"The trend towards lightweight design, driven by increasingly stringent emission targets, poses challenges to conventional joining processes due to the different mechanical properties of the joining partners used to manufacture multi-material systems. For this reason, new versatile joining processes are in demand for joining dissimilar materials. In this regard, pin joining with cold extruded pin structures is a relatively new, two-stage joining process for joining materials such as high-strength steel and aluminium as well as steel and fibre-reinforced plastic to multi-material systems, without the need for auxiliary elements. Due to the novelty of the process, there are currently only a few studies on the robustness of this joining process available. Thus, limited statements on the stability of the joining process considering uncertain process conditions, such as varying material properties or friction values, can be provided. Motivated by this, the presented work investigates the influence of different uncertain process parameters on the pin extrusion as well as on the joining process itself, carrying out a systematic robustness analysis. Therefore, the methodical approach covers the complete process chain of pin joining, including the load-bearing capacity of the joint by means of numerical simulation and data-driven methods. Thereby, a deeper understanding of the pin joining process is generated and the versatility of the novel joining process is increased. Additionally, the provision of manufacturing recommendations for the forming of pin joints leads to a significant decrease in the failure probability caused by ploughing or buckling effects."}],"type":"journal_article","publication":"Journal of Manufacturing and Materials Processing"},{"publication_status":"published","publication_identifier":{"issn":["2504-4494"]},"citation":{"ama":"Borowski A, Gröger B, Füßel R, Gude M. Characterisation of Fibre Bundle Deformation Behaviour—Test Rig, Results and Conclusions. <i>Journal of Manufacturing and Materials Processing</i>. 2022;6(6). doi:<a href=\"https://doi.org/10.3390/jmmp6060146\">10.3390/jmmp6060146</a>","ieee":"A. Borowski, B. Gröger, R. Füßel, and M. Gude, “Characterisation of Fibre Bundle Deformation Behaviour—Test Rig, Results and Conclusions,” <i>Journal of Manufacturing and Materials Processing</i>, vol. 6, no. 6, Art. no. 146, 2022, doi: <a href=\"https://doi.org/10.3390/jmmp6060146\">10.3390/jmmp6060146</a>.","chicago":"Borowski, Andreas, Benjamin Gröger, René Füßel, and Maik Gude. “Characterisation of Fibre Bundle Deformation Behaviour—Test Rig, Results and Conclusions.” <i>Journal of Manufacturing and Materials Processing</i> 6, no. 6 (2022). <a href=\"https://doi.org/10.3390/jmmp6060146\">https://doi.org/10.3390/jmmp6060146</a>.","apa":"Borowski, A., Gröger, B., Füßel, R., &#38; Gude, M. (2022). Characterisation of Fibre Bundle Deformation Behaviour—Test Rig, Results and Conclusions. <i>Journal of Manufacturing and Materials Processing</i>, <i>6</i>(6), Article 146. <a href=\"https://doi.org/10.3390/jmmp6060146\">https://doi.org/10.3390/jmmp6060146</a>","short":"A. Borowski, B. Gröger, R. Füßel, M. Gude, Journal of Manufacturing and Materials Processing 6 (2022).","mla":"Borowski, Andreas, et al. “Characterisation of Fibre Bundle Deformation Behaviour—Test Rig, Results and Conclusions.” <i>Journal of Manufacturing and Materials Processing</i>, vol. 6, no. 6, 146, MDPI AG, 2022, doi:<a href=\"https://doi.org/10.3390/jmmp6060146\">10.3390/jmmp6060146</a>.","bibtex":"@article{Borowski_Gröger_Füßel_Gude_2022, title={Characterisation of Fibre Bundle Deformation Behaviour—Test Rig, Results and Conclusions}, volume={6}, DOI={<a href=\"https://doi.org/10.3390/jmmp6060146\">10.3390/jmmp6060146</a>}, number={6146}, journal={Journal of Manufacturing and Materials Processing}, publisher={MDPI AG}, author={Borowski, Andreas and Gröger, Benjamin and Füßel, René and Gude, Maik}, year={2022} }"},"intvolume":"         6","oa":"1","date_updated":"2023-01-02T11:05:02Z","author":[{"last_name":"Borowski","full_name":"Borowski, Andreas","first_name":"Andreas"},{"first_name":"Benjamin","full_name":"Gröger, Benjamin","last_name":"Gröger"},{"first_name":"René","last_name":"Füßel","full_name":"Füßel, René"},{"first_name":"Maik","last_name":"Gude","full_name":"Gude, Maik"}],"volume":6,"main_file_link":[{"url":"https://www.mdpi.com/2504-4494/6/6/146","open_access":"1"}],"doi":"10.3390/jmmp6060146","type":"journal_article","status":"public","project":[{"grant_number":"418701707","name":"TRR 285: TRR 285","_id":"130"},{"name":"TRR 285 - A: TRR 285 - Project Area A","_id":"131"},{"name":"TRR 285 – A03: TRR 285 - Subproject A03","_id":"137"}],"_id":"34255","user_id":"14931","department":[{"_id":"630"}],"article_number":"146","issue":"6","year":"2022","publisher":"MDPI AG","date_created":"2022-12-06T20:38:11Z","title":"Characterisation of Fibre Bundle Deformation Behaviour—Test Rig, Results and Conclusions","publication":"Journal of Manufacturing and Materials Processing","abstract":[{"text":"Deformation of continuous fibre reinforced plastics during thermally-assisted forming or joining processes leads to a change of the initial material structure. The load behaviour of composite parts strongly depends on the resultant material structure. The prediction of this material structure is a challenging task and requires a deep knowledge of the material behaviour above melting temperature and the occurring complex forming phenomena. Through this knowledge, the optimisation of manufacturing parameters for a more efficient and reproducible process can be enabled and are in the focus of many investigations. In the present paper, a simplified pultrusion test rig is developed and presented to investigate the deformation behaviour of a thermoplastic semi-finished fiber product in a forming element. Therefore, different process parameters, like forming element temperature, pulling velocity as well as the forming element geometry, are varied. The deformation behaviour in the forming zone of the thermoplastic preimpregnated continuous glass fibre-reinforced material is investigated by computed tomography and the resultant pulling forces are measured. The results clearly show the correlation between the forming element temperature and the resulting forces due to a change in the viscosity of the thermoplastic matrix and the resulting fiber matrix interaction. In addition, the evaluation of the measurement data shows which forming forces are required to change the shape of the thermoplastic unidirectional material with a rectangular cross-section to a round one.","lang":"eng"}],"keyword":["Industrial and Manufacturing Engineering","Mechanical Engineering","Mechanics of Materials"],"language":[{"iso":"eng"}]},{"status":"public","type":"journal_article","article_number":"127","department":[{"_id":"630"}],"user_id":"14931","_id":"34248","project":[{"name":"TRR 285: TRR 285","_id":"130","grant_number":"418701707"},{"name":"TRR 285 - C: TRR 285 - Project Area C","_id":"133"},{"name":"TRR 285 – C01: TRR 285 - Subproject C01","_id":"145"},{"_id":"146","name":"TRR 285 – C02: TRR 285 - Subproject C02"}],"intvolume":"         6","citation":{"ama":"Römisch D, Hetzel A, Wituschek S, Lechner M, Merklein M. Pin Extrusion for Mechanical Joining from Orbital Formed Tailored Blanks with Local Material Pre-Distribution. <i>Journal of Manufacturing and Materials Processing</i>. 2022;6(6). doi:<a href=\"https://doi.org/10.3390/jmmp6060127\">10.3390/jmmp6060127</a>","ieee":"D. Römisch, A. Hetzel, S. Wituschek, M. Lechner, and M. Merklein, “Pin Extrusion for Mechanical Joining from Orbital Formed Tailored Blanks with Local Material Pre-Distribution,” <i>Journal of Manufacturing and Materials Processing</i>, vol. 6, no. 6, Art. no. 127, 2022, doi: <a href=\"https://doi.org/10.3390/jmmp6060127\">10.3390/jmmp6060127</a>.","chicago":"Römisch, David, Andreas Hetzel, Simon Wituschek, Michael Lechner, and Marion Merklein. “Pin Extrusion for Mechanical Joining from Orbital Formed Tailored Blanks with Local Material Pre-Distribution.” <i>Journal of Manufacturing and Materials Processing</i> 6, no. 6 (2022). <a href=\"https://doi.org/10.3390/jmmp6060127\">https://doi.org/10.3390/jmmp6060127</a>.","apa":"Römisch, D., Hetzel, A., Wituschek, S., Lechner, M., &#38; Merklein, M. (2022). Pin Extrusion for Mechanical Joining from Orbital Formed Tailored Blanks with Local Material Pre-Distribution. <i>Journal of Manufacturing and Materials Processing</i>, <i>6</i>(6), Article 127. <a href=\"https://doi.org/10.3390/jmmp6060127\">https://doi.org/10.3390/jmmp6060127</a>","mla":"Römisch, David, et al. “Pin Extrusion for Mechanical Joining from Orbital Formed Tailored Blanks with Local Material Pre-Distribution.” <i>Journal of Manufacturing and Materials Processing</i>, vol. 6, no. 6, 127, MDPI AG, 2022, doi:<a href=\"https://doi.org/10.3390/jmmp6060127\">10.3390/jmmp6060127</a>.","short":"D. Römisch, A. Hetzel, S. Wituschek, M. Lechner, M. Merklein, Journal of Manufacturing and Materials Processing 6 (2022).","bibtex":"@article{Römisch_Hetzel_Wituschek_Lechner_Merklein_2022, title={Pin Extrusion for Mechanical Joining from Orbital Formed Tailored Blanks with Local Material Pre-Distribution}, volume={6}, DOI={<a href=\"https://doi.org/10.3390/jmmp6060127\">10.3390/jmmp6060127</a>}, number={6127}, journal={Journal of Manufacturing and Materials Processing}, publisher={MDPI AG}, author={Römisch, David and Hetzel, Andreas and Wituschek, Simon and Lechner, Michael and Merklein, Marion}, year={2022} }"},"publication_identifier":{"issn":["2504-4494"]},"publication_status":"published","doi":"10.3390/jmmp6060127","main_file_link":[{"open_access":"1"}],"volume":6,"author":[{"first_name":"David","full_name":"Römisch, David","last_name":"Römisch"},{"last_name":"Hetzel","full_name":"Hetzel, Andreas","first_name":"Andreas"},{"first_name":"Simon","full_name":"Wituschek, Simon","last_name":"Wituschek"},{"first_name":"Michael","full_name":"Lechner, Michael","last_name":"Lechner"},{"last_name":"Merklein","full_name":"Merklein, Marion","first_name":"Marion"}],"date_updated":"2023-01-02T11:01:34Z","oa":"1","abstract":[{"text":"Pin extrusion is a common process to realise pin structures in different geometrical dimensions for a subsequent joining operation. Nevertheless, the process of pin extrusion offers process limits regarding sheet thinning as a consequence of the punch penetration depth into the sheet. Thereby, cracks at the residual sheet thickness can occur during strength tests, resulting in a failure of the complete joint due to severe thinning. Therefore, measures have to be taken into account to reduce the thinning. One possibility is the application of orbital formed tailored blanks with a local material pre-distribution, which allows a higher sheet thickness in the desired area. Within this contribution, the novel approach of a process combination of orbital forming and pin extrusion is investigated. To reveal the potential of a local material pre-distribution, conventional specimens are compared with previously orbital formed components. Relevant parameters such as the residual sheet thickness, the pin height as well as the average hardness values are compared. The results show a significant positive influence of a local material pre-distribution on the residual sheet thickness as well as the resulting pin height. Furthermore, the strain hardening during orbital forming can be seen as an additional advantage. To conclude the results, the process limits of conventional pin extrusion can be expanded significantly by the application of specimens with a local material pre-distribution.","lang":"eng"}],"publication":"Journal of Manufacturing and Materials Processing","language":[{"iso":"eng"}],"keyword":["Industrial and Manufacturing Engineering","Mechanical Engineering","Mechanics of Materials"],"year":"2022","issue":"6","title":"Pin Extrusion for Mechanical Joining from Orbital Formed Tailored Blanks with Local Material Pre-Distribution","date_created":"2022-12-06T18:56:24Z","publisher":"MDPI AG"},{"_id":"34214","project":[{"name":"TRR 285: TRR 285","_id":"130","grant_number":"418701707"},{"_id":"133","name":"TRR 285 - C: TRR 285 - Project Area C"},{"name":"TRR 285 – C05: TRR 285 - Subproject C05","_id":"149"}],"department":[{"_id":"630"}],"user_id":"14931","type":"journal_article","status":"public","date_updated":"2023-01-02T11:10:08Z","volume":5,"author":[{"full_name":"Schaude, Janik","last_name":"Schaude","first_name":"Janik"},{"first_name":"Tino","last_name":"Hausotte","full_name":"Hausotte, Tino"}],"doi":"10.1007/s41871-022-00143-9","publication_identifier":{"issn":["2520-811X","2520-8128"]},"publication_status":"published","page":"139-148","intvolume":"         5","citation":{"ama":"Schaude J, Hausotte T. Atomic Force Microscope with an Adjustable Probe Direction and Integrated Sensing and Actuation. <i>Nanomanufacturing and Metrology</i>. 2022;5(2):139-148. doi:<a href=\"https://doi.org/10.1007/s41871-022-00143-9\">10.1007/s41871-022-00143-9</a>","ieee":"J. Schaude and T. Hausotte, “Atomic Force Microscope with an Adjustable Probe Direction and Integrated Sensing and Actuation,” <i>Nanomanufacturing and Metrology</i>, vol. 5, no. 2, pp. 139–148, 2022, doi: <a href=\"https://doi.org/10.1007/s41871-022-00143-9\">10.1007/s41871-022-00143-9</a>.","chicago":"Schaude, Janik, and Tino Hausotte. “Atomic Force Microscope with an Adjustable Probe Direction and Integrated Sensing and Actuation.” <i>Nanomanufacturing and Metrology</i> 5, no. 2 (2022): 139–48. <a href=\"https://doi.org/10.1007/s41871-022-00143-9\">https://doi.org/10.1007/s41871-022-00143-9</a>.","apa":"Schaude, J., &#38; Hausotte, T. (2022). Atomic Force Microscope with an Adjustable Probe Direction and Integrated Sensing and Actuation. <i>Nanomanufacturing and Metrology</i>, <i>5</i>(2), 139–148. <a href=\"https://doi.org/10.1007/s41871-022-00143-9\">https://doi.org/10.1007/s41871-022-00143-9</a>","bibtex":"@article{Schaude_Hausotte_2022, title={Atomic Force Microscope with an Adjustable Probe Direction and Integrated Sensing and Actuation}, volume={5}, DOI={<a href=\"https://doi.org/10.1007/s41871-022-00143-9\">10.1007/s41871-022-00143-9</a>}, number={2}, journal={Nanomanufacturing and Metrology}, publisher={Springer Science and Business Media LLC}, author={Schaude, Janik and Hausotte, Tino}, year={2022}, pages={139–148} }","short":"J. Schaude, T. Hausotte, Nanomanufacturing and Metrology 5 (2022) 139–148.","mla":"Schaude, Janik, and Tino Hausotte. “Atomic Force Microscope with an Adjustable Probe Direction and Integrated Sensing and Actuation.” <i>Nanomanufacturing and Metrology</i>, vol. 5, no. 2, Springer Science and Business Media LLC, 2022, pp. 139–48, doi:<a href=\"https://doi.org/10.1007/s41871-022-00143-9\">10.1007/s41871-022-00143-9</a>."},"keyword":["Industrial and Manufacturing Engineering","Mechanical Engineering","Materials Science (miscellaneous)"],"language":[{"iso":"eng"}],"publication":"Nanomanufacturing and Metrology","abstract":[{"text":"This article presents the application and evaluation of a cantilever with integrated sensing and actuation as part of an atomic force microscope (AFM) with an adjustable probe direction, which is integrated into a nano measuring machine (NMM-1). The AFM, which is operated in closed-loop intermittent contact mode, is based on two rotational axes that enable the adjustment of the probe direction to cover a complete hemisphere. The axes greatly enlarge the metrology frame of the measuring system by materials with a comparatively high coefficient of thermal expansion, which ultimately limits the achievable measurement uncertainty of the measuring system. Thus, to reduce the thermal sensitivity of the system, the redesign of the rotational kinematics is mandatory. However, in this article, some preliminary investigations on the application of a self-sensing cantilever with an integrated micro heater for its stimulation will be presented. In previous investigations, a piezoelectric actuator has been applied to stimulate the cantilever. However, the removal of the piezoelectric actuator, which is enabled by the application of a cantilever with an integrated micro heater, promises an essential simplification of the sensor holder. Thus, in the future it might be possible to use materials with a low coefficient of thermal expansion, which are often difficult to machine and therefore only allow for rather simple geometries. Furthermore, because of the creepage of piezoelectric actuators, their removal from the metrology frame might lead to improved metrological characteristics. As will be shown, there are no significant differences between the two modes of actuation. Therefore, the redesigned rotational system will be based on the cantilever with integrated sensing and actuation.","lang":"eng"}],"publisher":"Springer Science and Business Media LLC","date_created":"2022-12-05T21:15:09Z","title":"Atomic Force Microscope with an Adjustable Probe Direction and Integrated Sensing and Actuation","issue":"2","year":"2022"},{"publication":"Metals","abstract":[{"text":"Joining by forming operations presents powerful and complex joining techniques. Clinching is a well-known joining process for use in sheet metalworking. Currently, clinched joints are focusing on mechanically enhanced connections. Additionally, the demand for integrating electrical requirements to transmit electrical currents will be increased in the future. This integration is particularly important, for instance, in the e-mobility sector. It enables connecting battery cells with electrical joints of aluminum and copper. Systematic use of the process-specific advantages of this joining method opens up the possibility to find and create electrically optimized connections. The optimization for the transmission of electrical currents will be demonstrated for clinched joints by adapting the tool geometry and the clinched joint design. Based on a comparison of the electrical joint resistance, the limit use temperature is defined for the joining materials used based on the microstructural condition and the aging condition due to artificial aging. As a result of the investigations carried out, reliable current transmission at a constant conductor temperature of up to 120 °C can be achieved for clinched copper–copper joints. In the case of pure aluminum joints and mixed joints of aluminum and copper, long-term stable current transmission can be ensured up to a conductor temperature of 100 °C.","lang":"eng"}],"keyword":["General Materials Science","Metals and Alloys"],"language":[{"iso":"eng"}],"issue":"10","year":"2022","publisher":"MDPI AG","date_created":"2022-12-06T19:20:46Z","title":"Long-Term Behavior of Clinched Electrical Contacts","type":"journal_article","status":"public","project":[{"grant_number":"418701707","_id":"130","name":"TRR 285: TRR 285"},{"_id":"131","name":"TRR 285 - A: TRR 285 - Project Area A"},{"name":"TRR 285 – A04: TRR 285 - Subproject A04","_id":"138"}],"_id":"34251","user_id":"14931","department":[{"_id":"630"}],"article_number":"1651","publication_status":"published","publication_identifier":{"issn":["2075-4701"]},"citation":{"apa":"Kalich, J., Matzke, M., Pfeiffer, W., Schlegel, S., Kornhuber, L., &#38; Füssel, U. (2022). Long-Term Behavior of Clinched Electrical Contacts. <i>Metals</i>, <i>12</i>(10), Article 1651. <a href=\"https://doi.org/10.3390/met12101651\">https://doi.org/10.3390/met12101651</a>","mla":"Kalich, Jan, et al. “Long-Term Behavior of Clinched Electrical Contacts.” <i>Metals</i>, vol. 12, no. 10, 1651, MDPI AG, 2022, doi:<a href=\"https://doi.org/10.3390/met12101651\">10.3390/met12101651</a>.","bibtex":"@article{Kalich_Matzke_Pfeiffer_Schlegel_Kornhuber_Füssel_2022, title={Long-Term Behavior of Clinched Electrical Contacts}, volume={12}, DOI={<a href=\"https://doi.org/10.3390/met12101651\">10.3390/met12101651</a>}, number={101651}, journal={Metals}, publisher={MDPI AG}, author={Kalich, Jan and Matzke, Marcus and Pfeiffer, Wolfgang and Schlegel, Stephan and Kornhuber, Ludwig and Füssel, Uwe}, year={2022} }","short":"J. Kalich, M. Matzke, W. Pfeiffer, S. Schlegel, L. Kornhuber, U. Füssel, Metals 12 (2022).","ieee":"J. Kalich, M. Matzke, W. Pfeiffer, S. Schlegel, L. Kornhuber, and U. Füssel, “Long-Term Behavior of Clinched Electrical Contacts,” <i>Metals</i>, vol. 12, no. 10, Art. no. 1651, 2022, doi: <a href=\"https://doi.org/10.3390/met12101651\">10.3390/met12101651</a>.","chicago":"Kalich, Jan, Marcus Matzke, Wolfgang Pfeiffer, Stephan Schlegel, Ludwig Kornhuber, and Uwe Füssel. “Long-Term Behavior of Clinched Electrical Contacts.” <i>Metals</i> 12, no. 10 (2022). <a href=\"https://doi.org/10.3390/met12101651\">https://doi.org/10.3390/met12101651</a>.","ama":"Kalich J, Matzke M, Pfeiffer W, Schlegel S, Kornhuber L, Füssel U. Long-Term Behavior of Clinched Electrical Contacts. <i>Metals</i>. 2022;12(10). doi:<a href=\"https://doi.org/10.3390/met12101651\">10.3390/met12101651</a>"},"intvolume":"        12","oa":"1","date_updated":"2023-01-02T11:06:35Z","author":[{"first_name":"Jan","full_name":"Kalich, Jan","last_name":"Kalich"},{"full_name":"Matzke, Marcus","last_name":"Matzke","first_name":"Marcus"},{"last_name":"Pfeiffer","full_name":"Pfeiffer, Wolfgang","first_name":"Wolfgang"},{"full_name":"Schlegel, Stephan","last_name":"Schlegel","first_name":"Stephan"},{"first_name":"Ludwig","full_name":"Kornhuber, Ludwig","last_name":"Kornhuber"},{"last_name":"Füssel","full_name":"Füssel, Uwe","first_name":"Uwe"}],"volume":12,"main_file_link":[{"open_access":"1","url":"https://www.mdpi.com/2075-4701/12/10/1651"}],"doi":"10.3390/met12101651"},{"citation":{"apa":"Gröger, B., Wang, J., Bätzel, T., Hornig, A., &#38; Gude, M. (2022). Modelling and Simulation Strategies for Fluid–Structure-Interactions of Highly Viscous Thermoplastic Melt and Single Fibres—A Numerical Study. <i>Materials</i>, <i>15</i>(20), Article 7241. <a href=\"https://doi.org/10.3390/ma15207241\">https://doi.org/10.3390/ma15207241</a>","mla":"Gröger, Benjamin, et al. “Modelling and Simulation Strategies for Fluid–Structure-Interactions of Highly Viscous Thermoplastic Melt and Single Fibres—A Numerical Study.” <i>Materials</i>, vol. 15, no. 20, 7241, MDPI AG, 2022, doi:<a href=\"https://doi.org/10.3390/ma15207241\">10.3390/ma15207241</a>.","short":"B. Gröger, J. Wang, T. Bätzel, A. Hornig, M. Gude, Materials 15 (2022).","bibtex":"@article{Gröger_Wang_Bätzel_Hornig_Gude_2022, title={Modelling and Simulation Strategies for Fluid–Structure-Interactions of Highly Viscous Thermoplastic Melt and Single Fibres—A Numerical Study}, volume={15}, DOI={<a href=\"https://doi.org/10.3390/ma15207241\">10.3390/ma15207241</a>}, number={207241}, journal={Materials}, publisher={MDPI AG}, author={Gröger, Benjamin and Wang, Jingjing and Bätzel, Tim and Hornig, Andreas and Gude, Maik}, year={2022} }","ama":"Gröger B, Wang J, Bätzel T, Hornig A, Gude M. Modelling and Simulation Strategies for Fluid–Structure-Interactions of Highly Viscous Thermoplastic Melt and Single Fibres—A Numerical Study. <i>Materials</i>. 2022;15(20). doi:<a href=\"https://doi.org/10.3390/ma15207241\">10.3390/ma15207241</a>","chicago":"Gröger, Benjamin, Jingjing Wang, Tim Bätzel, Andreas Hornig, and Maik Gude. “Modelling and Simulation Strategies for Fluid–Structure-Interactions of Highly Viscous Thermoplastic Melt and Single Fibres—A Numerical Study.” <i>Materials</i> 15, no. 20 (2022). <a href=\"https://doi.org/10.3390/ma15207241\">https://doi.org/10.3390/ma15207241</a>.","ieee":"B. Gröger, J. Wang, T. Bätzel, A. Hornig, and M. Gude, “Modelling and Simulation Strategies for Fluid–Structure-Interactions of Highly Viscous Thermoplastic Melt and Single Fibres—A Numerical Study,” <i>Materials</i>, vol. 15, no. 20, Art. no. 7241, 2022, doi: <a href=\"https://doi.org/10.3390/ma15207241\">10.3390/ma15207241</a>."},"intvolume":"        15","publication_status":"published","publication_identifier":{"issn":["1996-1944"]},"main_file_link":[{"url":"https://www.mdpi.com/1996-1944/15/20/7241","open_access":"1"}],"doi":"10.3390/ma15207241","author":[{"first_name":"Benjamin","last_name":"Gröger","full_name":"Gröger, Benjamin"},{"last_name":"Wang","full_name":"Wang, Jingjing","first_name":"Jingjing"},{"last_name":"Bätzel","full_name":"Bätzel, Tim","first_name":"Tim"},{"first_name":"Andreas","last_name":"Hornig","full_name":"Hornig, Andreas"},{"first_name":"Maik","last_name":"Gude","full_name":"Gude, Maik"}],"volume":15,"date_updated":"2023-01-02T11:06:58Z","oa":"1","status":"public","type":"journal_article","article_number":"7241","user_id":"14931","department":[{"_id":"630"}],"project":[{"grant_number":"418701707","_id":"130","name":"TRR 285: TRR 285"},{"_id":"131","name":"TRR 285 - A: TRR 285 - Project Area A"},{"_id":"137","name":"TRR 285 – A03: TRR 285 - Subproject A03"}],"_id":"34254","year":"2022","issue":"20","title":"Modelling and Simulation Strategies for Fluid–Structure-Interactions of Highly Viscous Thermoplastic Melt and Single Fibres—A Numerical Study","date_created":"2022-12-06T20:33:11Z","publisher":"MDPI AG","abstract":[{"lang":"eng","text":"A virtual test setup for investigating single fibres in a transverse shear flow based on a parallel-plate rheometer is presented. The investigations are carried out to verify a numerical representation of the fluid–structure interaction (FSI), where Arbitrary Lagrangian–Eulerian (ALE) and computational fluid dynamics (CFD) methods are used and evaluated. Both are suitable to simulate flexible solid structures in a transverse shear flow. Comparative investigations with different model setups and increasing complexity are presented. It is shown, that the CFD method with an interface-based coupling approach is not capable of handling small fibre diameters in comparison to large fluid domains due to mesh dependencies at the interface definitions. The ALE method is more suited for this task since fibres are embedded without any mesh restrictions. Element types beam, solid, and discrete are considered for fibre modelling. It is shown that the beam formulation for ALE and 3D solid elements for the CFD method are the preferred options."}],"publication":"Materials","language":[{"iso":"eng"}],"keyword":["General Materials Science"]},{"_id":"34280","project":[{"name":"TRR 285: TRR 285","_id":"130","grant_number":"418701707"},{"_id":"133","name":"TRR 285 - C: TRR 285 - Project Area C"},{"name":"TRR 285 – C04: TRR 285 - Subproject C04","_id":"148"}],"department":[{"_id":"630"}],"user_id":"14931","type":"conference","status":"public","date_updated":"2023-01-02T11:13:59Z","volume":926,"author":[{"full_name":"Köhler, Daniel","last_name":"Köhler","first_name":"Daniel"},{"first_name":"Richard","last_name":"Stephan","full_name":"Stephan, Richard"},{"full_name":"Kupfer, Robert","last_name":"Kupfer","first_name":"Robert"},{"last_name":"Troschitz","full_name":"Troschitz, Juliane","first_name":"Juliane"},{"first_name":"Alexander","last_name":"Brosius","full_name":"Brosius, Alexander"},{"full_name":"Gude, Maik","last_name":"Gude","first_name":"Maik"}],"doi":"10.4028/p-32330d","publication_identifier":{"issn":["1662-9795"]},"publication_status":"published","page":"1489-1497","intvolume":"       926","citation":{"apa":"Köhler, D., Stephan, R., Kupfer, R., Troschitz, J., Brosius, A., &#38; Gude, M. (2022). Investigations on Combined in situ CT and Acoustic Analysis during Clinching. <i>Key Engineering Materials</i>, <i>926</i>, 1489–1497. <a href=\"https://doi.org/10.4028/p-32330d\">https://doi.org/10.4028/p-32330d</a>","bibtex":"@inproceedings{Köhler_Stephan_Kupfer_Troschitz_Brosius_Gude_2022, title={Investigations on Combined in situ CT and Acoustic Analysis during Clinching}, volume={926}, DOI={<a href=\"https://doi.org/10.4028/p-32330d\">10.4028/p-32330d</a>}, booktitle={Key Engineering Materials}, publisher={Trans Tech Publications, Ltd.}, author={Köhler, Daniel and Stephan, Richard and Kupfer, Robert and Troschitz, Juliane and Brosius, Alexander and Gude, Maik}, year={2022}, pages={1489–1497} }","short":"D. Köhler, R. Stephan, R. Kupfer, J. Troschitz, A. Brosius, M. Gude, in: Key Engineering Materials, Trans Tech Publications, Ltd., 2022, pp. 1489–1497.","mla":"Köhler, Daniel, et al. “Investigations on Combined in Situ CT and Acoustic Analysis during Clinching.” <i>Key Engineering Materials</i>, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1489–97, doi:<a href=\"https://doi.org/10.4028/p-32330d\">10.4028/p-32330d</a>.","ama":"Köhler D, Stephan R, Kupfer R, Troschitz J, Brosius A, Gude M. Investigations on Combined in situ CT and Acoustic Analysis during Clinching. In: <i>Key Engineering Materials</i>. Vol 926. Trans Tech Publications, Ltd.; 2022:1489-1497. doi:<a href=\"https://doi.org/10.4028/p-32330d\">10.4028/p-32330d</a>","chicago":"Köhler, Daniel, Richard Stephan, Robert Kupfer, Juliane Troschitz, Alexander Brosius, and Maik Gude. “Investigations on Combined in Situ CT and Acoustic Analysis during Clinching.” In <i>Key Engineering Materials</i>, 926:1489–97. Trans Tech Publications, Ltd., 2022. <a href=\"https://doi.org/10.4028/p-32330d\">https://doi.org/10.4028/p-32330d</a>.","ieee":"D. Köhler, R. Stephan, R. Kupfer, J. Troschitz, A. Brosius, and M. Gude, “Investigations on Combined in situ CT and Acoustic Analysis during Clinching,” in <i>Key Engineering Materials</i>, 2022, vol. 926, pp. 1489–1497, doi: <a href=\"https://doi.org/10.4028/p-32330d\">10.4028/p-32330d</a>."},"keyword":["Mechanical Engineering","Mechanics of Materials","General Materials Science"],"language":[{"iso":"eng"}],"publication":"Key Engineering Materials","abstract":[{"text":"Clinching is a cost efficient method for joining components in series production. To assure the clinch point’s quality, the force displacement curve during clinching or the bottom thickness are monitored. The most significant geometrical characteristics of the clinch point, neck thickness and undercut, are usually tested destructively by microsectioning. However, micrograph preparation goes ahead with a resetting of elastic deformations and crack-closing after unloading. To generate a comprehensive knowledge of the clinch point’s inner geometry under load, in-situ computed tomography (CT) and acoustic testing (TDA) can be combined. While the TDA is highly sensitive to the inner state of the clinch point, it could detect critical events like crack development during loading. If such events are indicated, the loading process is stopped and a stepped in-situ CT of the following crack and deformation development is performed. In this paper, the concept is applied to the process of clinching itself, providing a detailed three-dimensional insight in the development of the joining zone. A test set-up is used which allows a stepwise clinching of two aluminium sheets EN AW 6014. Furthermore, this set-up is positioned within a CT system. In order to minimize X-ray absorption, a beryllium cylinder is used within the set-up frame and clinching tools are made from Si3N4. The actuator and sensor necessary for the TDA are integrated in the set-up. In regular process steps, the clinching process is interrupted in order to perform a TDA and a CT scan. In order to enhance the visibility of the interface, a thin tin layer is positioned between the sheets prior clinching. It is shown, that the test-set up allows a monitoring of the dynamic behaviour of the specimen during clinching while the CT scans visualize the inner geometry and material flow non-destructively.","lang":"eng"}],"publisher":"Trans Tech Publications, Ltd.","date_created":"2022-12-07T16:38:44Z","title":"Investigations on Combined in situ CT and Acoustic Analysis during Clinching","year":"2022"},{"doi":"10.1080/15376494.2022.2140233","title":"Numerical fatigue life prediction of corroded and non-corroded clinched joints","date_created":"2022-12-07T10:03:17Z","author":[{"full_name":"Harzheim, Sven","last_name":"Harzheim","first_name":"Sven"},{"last_name":"Hofmann","full_name":"Hofmann, Martin","first_name":"Martin"},{"first_name":"Thomas","last_name":"Wallmersperger","full_name":"Wallmersperger, Thomas"}],"date_updated":"2023-01-02T11:10:49Z","publisher":"Informa UK Limited","page":"1-6","citation":{"apa":"Harzheim, S., Hofmann, M., &#38; Wallmersperger, T. (2022). Numerical fatigue life prediction of corroded and non-corroded clinched joints. <i>Mechanics of Advanced Materials and Structures</i>, 1–6. <a href=\"https://doi.org/10.1080/15376494.2022.2140233\">https://doi.org/10.1080/15376494.2022.2140233</a>","mla":"Harzheim, Sven, et al. “Numerical Fatigue Life Prediction of Corroded and Non-Corroded Clinched Joints.” <i>Mechanics of Advanced Materials and Structures</i>, Informa UK Limited, 2022, pp. 1–6, doi:<a href=\"https://doi.org/10.1080/15376494.2022.2140233\">10.1080/15376494.2022.2140233</a>.","bibtex":"@article{Harzheim_Hofmann_Wallmersperger_2022, title={Numerical fatigue life prediction of corroded and non-corroded clinched joints}, DOI={<a href=\"https://doi.org/10.1080/15376494.2022.2140233\">10.1080/15376494.2022.2140233</a>}, journal={Mechanics of Advanced Materials and Structures}, publisher={Informa UK Limited}, author={Harzheim, Sven and Hofmann, Martin and Wallmersperger, Thomas}, year={2022}, pages={1–6} }","short":"S. Harzheim, M. Hofmann, T. Wallmersperger, Mechanics of Advanced Materials and Structures (2022) 1–6.","ama":"Harzheim S, Hofmann M, Wallmersperger T. Numerical fatigue life prediction of corroded and non-corroded clinched joints. <i>Mechanics of Advanced Materials and Structures</i>. Published online 2022:1-6. doi:<a href=\"https://doi.org/10.1080/15376494.2022.2140233\">10.1080/15376494.2022.2140233</a>","ieee":"S. Harzheim, M. Hofmann, and T. Wallmersperger, “Numerical fatigue life prediction of corroded and non-corroded clinched joints,” <i>Mechanics of Advanced Materials and Structures</i>, pp. 1–6, 2022, doi: <a href=\"https://doi.org/10.1080/15376494.2022.2140233\">10.1080/15376494.2022.2140233</a>.","chicago":"Harzheim, Sven, Martin Hofmann, and Thomas Wallmersperger. “Numerical Fatigue Life Prediction of Corroded and Non-Corroded Clinched Joints.” <i>Mechanics of Advanced Materials and Structures</i>, 2022, 1–6. <a href=\"https://doi.org/10.1080/15376494.2022.2140233\">https://doi.org/10.1080/15376494.2022.2140233</a>."},"year":"2022","publication_identifier":{"issn":["1537-6494","1537-6532"]},"publication_status":"published","language":[{"iso":"eng"}],"keyword":["Mechanical Engineering","Mechanics of Materials","General Materials Science","General Mathematics","Civil and Structural Engineering"],"department":[{"_id":"630"}],"user_id":"14931","_id":"34261","project":[{"grant_number":"418701707","_id":"130","name":"TRR 285: TRR 285"},{"name":"TRR 285 - B: TRR 285 - Project Area B","_id":"132"},{"name":"TRR 285 – B03: TRR 285 - Subproject B03","_id":"142"}],"status":"public","abstract":[{"lang":"eng","text":"Mechanical clinching is used to create lightweight hybrid structures. In order to estimate the service life of clinched components, its fatigue properties need to be known under different mechanical loading conditions. In addition to fatigue, corrosion is another factor that affects the fatigue life of clinched joints. In the literature, many corrosion and high-cycle fatigue damage models exist. However, little is known about how both phenomena interact in clinched joints. In this article, the influence of galvanic corrosion on clinched EN AW-6014/HCT590X + Z sheets on the fatigue life is investigated by means of numerical simulations and experimental results. An accurate prediction of the Wöhler lines of non-corroded and pre-corroded clinched specimens is shown."}],"publication":"Mechanics of Advanced Materials and Structures","type":"journal_article"},{"keyword":["Metals and Alloys","Mechanics of Materials","Condensed Matter Physics","Electronic","Optical and Magnetic Materials"],"language":[{"iso":"eng"}],"_id":"33694","user_id":"66695","abstract":[{"text":"<jats:title>Abstract</jats:title>\r\n               <jats:p>The round robin test investigated the reliability users can expect for AlSi10Mg additive manufactured specimens by laser powder bed fusion through examining powder quality, process parameter, microstructure defects, strength and fatigue. Besides for one outlier, expected static material properties could be found. Optical microstructure inspection was beneficial to determine true porosity and porosity types to explain the occurring scatter in properties. Fractographic analyses reveal that the fatigue crack propagation starts at the rough as-built surface for all specimens. Statistical analysis of the scatter in fatigue using statistical derived safety factors concludes that at a stress of 36.87 MPa the fatigue limit of 10<jats:sup>7</jats:sup> cycles could be reached for all specimen with a survival probability of 99.999 %.</jats:p>","lang":"eng"}],"status":"public","publication":"Practical Metallography","type":"journal_article","title":"Reproducibility and Scattering in Additive Manufacturing: Results from a Round Robin on PBF-LB/M AlSi10Mg Alloy","doi":"10.1515/pm-2022-1018","date_updated":"2023-01-04T14:48:17Z","publisher":"Walter de Gruyter GmbH","volume":59,"date_created":"2022-10-11T13:15:48Z","author":[{"first_name":"M.","last_name":"Schneider","full_name":"Schneider, M."},{"full_name":"Bettge, D.","last_name":"Bettge","first_name":"D."},{"full_name":"Binder, M.","last_name":"Binder","first_name":"M."},{"last_name":"Dollmeier","full_name":"Dollmeier, K.","first_name":"K."},{"last_name":"Dreyer","orcid":"0000-0001-9560-9510","id":"66695","full_name":"Dreyer, Malte","first_name":"Malte"},{"full_name":"Hilgenberg, K.","last_name":"Hilgenberg","first_name":"K."},{"full_name":"Klöden, B.","last_name":"Klöden","first_name":"B."},{"first_name":"T.","full_name":"Schlingmann, T.","last_name":"Schlingmann"},{"last_name":"Schmidt","full_name":"Schmidt, J.","first_name":"J."}],"year":"2022","page":"580-614","intvolume":"        59","citation":{"apa":"Schneider, M., Bettge, D., Binder, M., Dollmeier, K., Dreyer, M., Hilgenberg, K., Klöden, B., Schlingmann, T., &#38; Schmidt, J. (2022). Reproducibility and Scattering in Additive Manufacturing: Results from a Round Robin on PBF-LB/M AlSi10Mg Alloy. <i>Practical Metallography</i>, <i>59</i>(10), 580–614. <a href=\"https://doi.org/10.1515/pm-2022-1018\">https://doi.org/10.1515/pm-2022-1018</a>","mla":"Schneider, M., et al. “Reproducibility and Scattering in Additive Manufacturing: Results from a Round Robin on PBF-LB/M AlSi10Mg Alloy.” <i>Practical Metallography</i>, vol. 59, no. 10, Walter de Gruyter GmbH, 2022, pp. 580–614, doi:<a href=\"https://doi.org/10.1515/pm-2022-1018\">10.1515/pm-2022-1018</a>.","bibtex":"@article{Schneider_Bettge_Binder_Dollmeier_Dreyer_Hilgenberg_Klöden_Schlingmann_Schmidt_2022, title={Reproducibility and Scattering in Additive Manufacturing: Results from a Round Robin on PBF-LB/M AlSi10Mg Alloy}, volume={59}, DOI={<a href=\"https://doi.org/10.1515/pm-2022-1018\">10.1515/pm-2022-1018</a>}, number={10}, journal={Practical Metallography}, publisher={Walter de Gruyter GmbH}, author={Schneider, M. and Bettge, D. and Binder, M. and Dollmeier, K. and Dreyer, Malte and Hilgenberg, K. and Klöden, B. and Schlingmann, T. and Schmidt, J.}, year={2022}, pages={580–614} }","short":"M. Schneider, D. Bettge, M. Binder, K. Dollmeier, M. Dreyer, K. Hilgenberg, B. Klöden, T. Schlingmann, J. Schmidt, Practical Metallography 59 (2022) 580–614.","ama":"Schneider M, Bettge D, Binder M, et al. Reproducibility and Scattering in Additive Manufacturing: Results from a Round Robin on PBF-LB/M AlSi10Mg Alloy. <i>Practical Metallography</i>. 2022;59(10):580-614. doi:<a href=\"https://doi.org/10.1515/pm-2022-1018\">10.1515/pm-2022-1018</a>","chicago":"Schneider, M., D. Bettge, M. Binder, K. Dollmeier, Malte Dreyer, K. Hilgenberg, B. Klöden, T. Schlingmann, and J. Schmidt. “Reproducibility and Scattering in Additive Manufacturing: Results from a Round Robin on PBF-LB/M AlSi10Mg Alloy.” <i>Practical Metallography</i> 59, no. 10 (2022): 580–614. <a href=\"https://doi.org/10.1515/pm-2022-1018\">https://doi.org/10.1515/pm-2022-1018</a>.","ieee":"M. Schneider <i>et al.</i>, “Reproducibility and Scattering in Additive Manufacturing: Results from a Round Robin on PBF-LB/M AlSi10Mg Alloy,” <i>Practical Metallography</i>, vol. 59, no. 10, pp. 580–614, 2022, doi: <a href=\"https://doi.org/10.1515/pm-2022-1018\">10.1515/pm-2022-1018</a>."},"publication_identifier":{"issn":["2195-8599","0032-678X"]},"publication_status":"published","issue":"10"},{"status":"public","publication":"physica status solidi (b)","type":"journal_article","keyword":["Condensed Matter Physics","Electronic","Optical and Magnetic Materials"],"article_number":"2200508","language":[{"iso":"eng"}],"_id":"35232","department":[{"_id":"15"}],"user_id":"77496","year":"2022","citation":{"ieee":"F. Meier <i>et al.</i>, “Selective Area Growth of Cubic Gallium Nitride in Nanoscopic Silicon Dioxide Masks,” <i>physica status solidi (b)</i>, Art. no. 2200508, 2022, doi: <a href=\"https://doi.org/10.1002/pssb.202200508\">10.1002/pssb.202200508</a>.","chicago":"Meier, Falco, Mario Littmann, Julius Bürger, Thomas Riedl, Daniel Kool, Jörg Lindner, Dirk Reuter, and Donat Josef As. “Selective Area Growth of Cubic Gallium Nitride in Nanoscopic Silicon Dioxide Masks.” <i>Physica Status Solidi (b)</i>, 2022. <a href=\"https://doi.org/10.1002/pssb.202200508\">https://doi.org/10.1002/pssb.202200508</a>.","ama":"Meier F, Littmann M, Bürger J, et al. Selective Area Growth of Cubic Gallium Nitride in Nanoscopic Silicon Dioxide Masks. <i>physica status solidi (b)</i>. Published online 2022. doi:<a href=\"https://doi.org/10.1002/pssb.202200508\">10.1002/pssb.202200508</a>","apa":"Meier, F., Littmann, M., Bürger, J., Riedl, T., Kool, D., Lindner, J., Reuter, D., &#38; As, D. J. (2022). Selective Area Growth of Cubic Gallium Nitride in Nanoscopic Silicon Dioxide Masks. <i>Physica Status Solidi (b)</i>, Article 2200508. <a href=\"https://doi.org/10.1002/pssb.202200508\">https://doi.org/10.1002/pssb.202200508</a>","mla":"Meier, Falco, et al. “Selective Area Growth of Cubic Gallium Nitride in Nanoscopic Silicon Dioxide Masks.” <i>Physica Status Solidi (b)</i>, 2200508, Wiley, 2022, doi:<a href=\"https://doi.org/10.1002/pssb.202200508\">10.1002/pssb.202200508</a>.","bibtex":"@article{Meier_Littmann_Bürger_Riedl_Kool_Lindner_Reuter_As_2022, title={Selective Area Growth of Cubic Gallium Nitride in Nanoscopic Silicon Dioxide Masks}, DOI={<a href=\"https://doi.org/10.1002/pssb.202200508\">10.1002/pssb.202200508</a>}, number={2200508}, journal={physica status solidi (b)}, publisher={Wiley}, author={Meier, Falco and Littmann, Mario and Bürger, Julius and Riedl, Thomas and Kool, Daniel and Lindner, Jörg and Reuter, Dirk and As, Donat Josef}, year={2022} }","short":"F. Meier, M. Littmann, J. Bürger, T. Riedl, D. Kool, J. Lindner, D. Reuter, D.J. As, Physica Status Solidi (b) (2022)."},"publication_identifier":{"issn":["0370-1972","1521-3951"]},"publication_status":"published","title":"Selective Area Growth of Cubic Gallium Nitride in Nanoscopic Silicon Dioxide Masks","doi":"10.1002/pssb.202200508","date_updated":"2023-01-04T14:53:24Z","publisher":"Wiley","author":[{"last_name":"Meier","full_name":"Meier, Falco","first_name":"Falco"},{"last_name":"Littmann","full_name":"Littmann, Mario","first_name":"Mario"},{"first_name":"Julius","full_name":"Bürger, Julius","id":"46952","last_name":"Bürger"},{"first_name":"Thomas","id":"36950","full_name":"Riedl, Thomas","last_name":"Riedl"},{"id":"44586","full_name":"Kool, Daniel","last_name":"Kool","first_name":"Daniel"},{"last_name":"Lindner","full_name":"Lindner, Jörg","id":"20797","first_name":"Jörg"},{"first_name":"Dirk","last_name":"Reuter","id":"37763","full_name":"Reuter, Dirk"},{"first_name":"Donat Josef","id":"14","full_name":"As, Donat Josef","last_name":"As","orcid":"0000-0003-1121-3565"}],"date_created":"2023-01-04T14:51:51Z"},{"citation":{"chicago":"Riedl, Thomas, Vinay Kunnathully, Alexander Trapp, Timo Langer, Dirk Reuter, and Jörg Lindner. “Size‐Dependent Strain Relaxation in InAs Quantum Dots on Top of GaAs(111)A Nanopillars.” <i>Advanced Materials Interfaces</i> 9, no. 11 (2022). <a href=\"https://doi.org/10.1002/admi.202102159\">https://doi.org/10.1002/admi.202102159</a>.","ieee":"T. Riedl, V. Kunnathully, A. Trapp, T. Langer, D. Reuter, and J. Lindner, “Size‐Dependent Strain Relaxation in InAs Quantum Dots on Top of GaAs(111)A Nanopillars,” <i>Advanced Materials Interfaces</i>, vol. 9, no. 11, Art. no. 2102159, 2022, doi: <a href=\"https://doi.org/10.1002/admi.202102159\">10.1002/admi.202102159</a>.","ama":"Riedl T, Kunnathully V, Trapp A, Langer T, Reuter D, Lindner J. Size‐Dependent Strain Relaxation in InAs Quantum Dots on Top of GaAs(111)A Nanopillars. <i>Advanced Materials Interfaces</i>. 2022;9(11). doi:<a href=\"https://doi.org/10.1002/admi.202102159\">10.1002/admi.202102159</a>","short":"T. Riedl, V. Kunnathully, A. Trapp, T. Langer, D. Reuter, J. Lindner, Advanced Materials Interfaces 9 (2022).","mla":"Riedl, Thomas, et al. “Size‐Dependent Strain Relaxation in InAs Quantum Dots on Top of GaAs(111)A Nanopillars.” <i>Advanced Materials Interfaces</i>, vol. 9, no. 11, 2102159, Wiley, 2022, doi:<a href=\"https://doi.org/10.1002/admi.202102159\">10.1002/admi.202102159</a>.","bibtex":"@article{Riedl_Kunnathully_Trapp_Langer_Reuter_Lindner_2022, title={Size‐Dependent Strain Relaxation in InAs Quantum Dots on Top of GaAs(111)A Nanopillars}, volume={9}, DOI={<a href=\"https://doi.org/10.1002/admi.202102159\">10.1002/admi.202102159</a>}, number={112102159}, journal={Advanced Materials Interfaces}, publisher={Wiley}, author={Riedl, Thomas and Kunnathully, Vinay and Trapp, Alexander and Langer, Timo and Reuter, Dirk and Lindner, Jörg}, year={2022} }","apa":"Riedl, T., Kunnathully, V., Trapp, A., Langer, T., Reuter, D., &#38; Lindner, J. (2022). Size‐Dependent Strain Relaxation in InAs Quantum Dots on Top of GaAs(111)A Nanopillars. <i>Advanced Materials Interfaces</i>, <i>9</i>(11), Article 2102159. <a href=\"https://doi.org/10.1002/admi.202102159\">https://doi.org/10.1002/admi.202102159</a>"},"intvolume":"         9","publication_status":"published","publication_identifier":{"issn":["2196-7350","2196-7350"]},"doi":"10.1002/admi.202102159","date_updated":"2023-01-10T12:09:09Z","author":[{"id":"36950","full_name":"Riedl, Thomas","last_name":"Riedl","first_name":"Thomas"},{"last_name":"Kunnathully","full_name":"Kunnathully, Vinay","first_name":"Vinay"},{"first_name":"Alexander","last_name":"Trapp","full_name":"Trapp, Alexander"},{"first_name":"Timo","full_name":"Langer, Timo","last_name":"Langer"},{"last_name":"Reuter","id":"37763","full_name":"Reuter, Dirk","first_name":"Dirk"},{"first_name":"Jörg","full_name":"Lindner, Jörg","id":"20797","last_name":"Lindner"}],"volume":9,"status":"public","type":"journal_article","article_number":"2102159","_id":"34053","user_id":"77496","department":[{"_id":"15"},{"_id":"230"}],"year":"2022","issue":"11","title":"Size‐Dependent Strain Relaxation in InAs Quantum Dots on Top of GaAs(111)A Nanopillars","publisher":"Wiley","date_created":"2022-11-10T14:11:18Z","publication":"Advanced Materials Interfaces","keyword":["Mechanical Engineering","Mechanics of Materials"],"language":[{"iso":"eng"}]},{"keyword":["Materials Chemistry","Electrical and Electronic Engineering","Metals and Alloys","Condensed Matter Physics","Ceramics and Composites"],"language":[{"iso":"eng"}],"publication":"Superconductor Science and Technology","abstract":[{"text":"<jats:title>Abstract</jats:title>\r\n               <jats:p>We demonstrate the fabrication of micron-wide tungsten silicide superconducting nanowire single-photon detectors on a silicon substrate using laser lithography. We show saturated internal detection efficiencies with wire widths ranging from 0.59 <jats:italic>µ</jats:italic>m to 1.43 <jats:italic>µ</jats:italic>m under illumination at 1550 nm. We demonstrate both straight wires, as well as meandered structures. Single-photon sensitivity is shown in devices up to 4 mm in length. Laser-lithographically written devices allow for fast and easy structuring of large areas while maintaining a saturated internal efficiency for wire widths around 1 <jats:italic>µ</jats:italic>m.</jats:p>","lang":"eng"}],"publisher":"IOP Publishing","date_created":"2022-10-11T07:14:11Z","title":"Laser-lithographically written micron-wide superconducting nanowire single-photon detectors","issue":"5","year":"2022","_id":"33671","user_id":"33913","department":[{"_id":"15"},{"_id":"230"},{"_id":"623"}],"article_number":"055005","type":"journal_article","status":"public","date_updated":"2023-01-12T13:02:52Z","author":[{"first_name":"Maximilian","last_name":"Protte","id":"46170","full_name":"Protte, Maximilian"},{"full_name":"Verma, Varun B","last_name":"Verma","first_name":"Varun B"},{"full_name":"Höpker, Jan Philipp","id":"33913","last_name":"Höpker","first_name":"Jan Philipp"},{"full_name":"Mirin, Richard P","last_name":"Mirin","first_name":"Richard P"},{"first_name":"Sae","last_name":"Woo Nam","full_name":"Woo Nam, Sae"},{"first_name":"Tim","last_name":"Bartley","full_name":"Bartley, Tim","id":"49683"}],"volume":35,"doi":"10.1088/1361-6668/ac5338","publication_status":"published","publication_identifier":{"issn":["0953-2048","1361-6668"]},"citation":{"apa":"Protte, M., Verma, V. B., Höpker, J. P., Mirin, R. P., Woo Nam, S., &#38; Bartley, T. (2022). Laser-lithographically written micron-wide superconducting nanowire single-photon detectors. <i>Superconductor Science and Technology</i>, <i>35</i>(5), Article 055005. <a href=\"https://doi.org/10.1088/1361-6668/ac5338\">https://doi.org/10.1088/1361-6668/ac5338</a>","bibtex":"@article{Protte_Verma_Höpker_Mirin_Woo Nam_Bartley_2022, title={Laser-lithographically written micron-wide superconducting nanowire single-photon detectors}, volume={35}, DOI={<a href=\"https://doi.org/10.1088/1361-6668/ac5338\">10.1088/1361-6668/ac5338</a>}, number={5055005}, journal={Superconductor Science and Technology}, publisher={IOP Publishing}, author={Protte, Maximilian and Verma, Varun B and Höpker, Jan Philipp and Mirin, Richard P and Woo Nam, Sae and Bartley, Tim}, year={2022} }","mla":"Protte, Maximilian, et al. “Laser-Lithographically Written Micron-Wide Superconducting Nanowire Single-Photon Detectors.” <i>Superconductor Science and Technology</i>, vol. 35, no. 5, 055005, IOP Publishing, 2022, doi:<a href=\"https://doi.org/10.1088/1361-6668/ac5338\">10.1088/1361-6668/ac5338</a>.","short":"M. Protte, V.B. Verma, J.P. Höpker, R.P. Mirin, S. Woo Nam, T. Bartley, Superconductor Science and Technology 35 (2022).","chicago":"Protte, Maximilian, Varun B Verma, Jan Philipp Höpker, Richard P Mirin, Sae Woo Nam, and Tim Bartley. “Laser-Lithographically Written Micron-Wide Superconducting Nanowire Single-Photon Detectors.” <i>Superconductor Science and Technology</i> 35, no. 5 (2022). <a href=\"https://doi.org/10.1088/1361-6668/ac5338\">https://doi.org/10.1088/1361-6668/ac5338</a>.","ieee":"M. Protte, V. B. Verma, J. P. Höpker, R. P. Mirin, S. Woo Nam, and T. Bartley, “Laser-lithographically written micron-wide superconducting nanowire single-photon detectors,” <i>Superconductor Science and Technology</i>, vol. 35, no. 5, Art. no. 055005, 2022, doi: <a href=\"https://doi.org/10.1088/1361-6668/ac5338\">10.1088/1361-6668/ac5338</a>.","ama":"Protte M, Verma VB, Höpker JP, Mirin RP, Woo Nam S, Bartley T. Laser-lithographically written micron-wide superconducting nanowire single-photon detectors. <i>Superconductor Science and Technology</i>. 2022;35(5). doi:<a href=\"https://doi.org/10.1088/1361-6668/ac5338\">10.1088/1361-6668/ac5338</a>"},"intvolume":"        35"},{"language":[{"iso":"eng"}],"keyword":["Atomic and Molecular Physics","and Optics","Electronic","Optical and Magnetic Materials"],"article_number":"108","department":[{"_id":"15"},{"_id":"230"},{"_id":"623"}],"user_id":"33913","_id":"30342","status":"public","publication":"Optica","type":"journal_article","doi":"10.1364/optica.445576","title":"Cryogenic integrated spontaneous parametric down-conversion","volume":9,"author":[{"id":"56843","full_name":"Lange, Nina Amelie","last_name":"Lange","first_name":"Nina Amelie"},{"first_name":"Jan Philipp","full_name":"Höpker, Jan Philipp","id":"33913","last_name":"Höpker"},{"full_name":"Ricken, Raimund","last_name":"Ricken","first_name":"Raimund"},{"full_name":"Quiring, Viktor","last_name":"Quiring","first_name":"Viktor"},{"first_name":"Christof","orcid":"https://orcid.org/0000-0002-5693-3083","last_name":"Eigner","full_name":"Eigner, Christof","id":"13244"},{"first_name":"Christine","last_name":"Silberhorn","id":"26263","full_name":"Silberhorn, Christine"},{"id":"49683","full_name":"Bartley, Tim","last_name":"Bartley","first_name":"Tim"}],"date_created":"2022-03-16T08:53:22Z","date_updated":"2023-01-12T13:42:23Z","publisher":"The Optical Society","intvolume":"         9","citation":{"chicago":"Lange, Nina Amelie, Jan Philipp Höpker, Raimund Ricken, Viktor Quiring, Christof Eigner, Christine Silberhorn, and Tim Bartley. “Cryogenic Integrated Spontaneous Parametric Down-Conversion.” <i>Optica</i> 9, no. 1 (2022). <a href=\"https://doi.org/10.1364/optica.445576\">https://doi.org/10.1364/optica.445576</a>.","ieee":"N. A. Lange <i>et al.</i>, “Cryogenic integrated spontaneous parametric down-conversion,” <i>Optica</i>, vol. 9, no. 1, Art. no. 108, 2022, doi: <a href=\"https://doi.org/10.1364/optica.445576\">10.1364/optica.445576</a>.","ama":"Lange NA, Höpker JP, Ricken R, et al. Cryogenic integrated spontaneous parametric down-conversion. <i>Optica</i>. 2022;9(1). doi:<a href=\"https://doi.org/10.1364/optica.445576\">10.1364/optica.445576</a>","short":"N.A. Lange, J.P. Höpker, R. Ricken, V. Quiring, C. Eigner, C. Silberhorn, T. Bartley, Optica 9 (2022).","mla":"Lange, Nina Amelie, et al. “Cryogenic Integrated Spontaneous Parametric Down-Conversion.” <i>Optica</i>, vol. 9, no. 1, 108, The Optical Society, 2022, doi:<a href=\"https://doi.org/10.1364/optica.445576\">10.1364/optica.445576</a>.","bibtex":"@article{Lange_Höpker_Ricken_Quiring_Eigner_Silberhorn_Bartley_2022, title={Cryogenic integrated spontaneous parametric down-conversion}, volume={9}, DOI={<a href=\"https://doi.org/10.1364/optica.445576\">10.1364/optica.445576</a>}, number={1108}, journal={Optica}, publisher={The Optical Society}, author={Lange, Nina Amelie and Höpker, Jan Philipp and Ricken, Raimund and Quiring, Viktor and Eigner, Christof and Silberhorn, Christine and Bartley, Tim}, year={2022} }","apa":"Lange, N. A., Höpker, J. P., Ricken, R., Quiring, V., Eigner, C., Silberhorn, C., &#38; Bartley, T. (2022). Cryogenic integrated spontaneous parametric down-conversion. <i>Optica</i>, <i>9</i>(1), Article 108. <a href=\"https://doi.org/10.1364/optica.445576\">https://doi.org/10.1364/optica.445576</a>"},"year":"2022","issue":"1","publication_identifier":{"issn":["2334-2536"]},"publication_status":"published"},{"volume":926,"author":[{"first_name":"Christian Roman","last_name":"Bielak","id":"34782","full_name":"Bielak, Christian Roman"},{"id":"45779","full_name":"Böhnke, Max","last_name":"Böhnke","first_name":"Max"},{"full_name":"Bobbert, Mathias","id":"7850","last_name":"Bobbert","first_name":"Mathias"},{"last_name":"Meschut","orcid":"0000-0002-2763-1246","full_name":"Meschut, Gerson","id":"32056","first_name":"Gerson"}],"date_updated":"2023-01-12T14:22:52Z","doi":"10.4028/p-5d009y","publication_identifier":{"issn":["1662-9795"]},"publication_status":"published","intvolume":"       926","page":"1516-1526","citation":{"apa":"Bielak, C. R., Böhnke, M., Bobbert, M., &#38; Meschut, G. (2022). Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints. <i>Key Engineering Materials</i>, <i>926</i>, 1516–1526. <a href=\"https://doi.org/10.4028/p-5d009y\">https://doi.org/10.4028/p-5d009y</a>","mla":"Bielak, Christian Roman, et al. “Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints.” <i>Key Engineering Materials</i>, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1516–26, doi:<a href=\"https://doi.org/10.4028/p-5d009y\">10.4028/p-5d009y</a>.","bibtex":"@article{Bielak_Böhnke_Bobbert_Meschut_2022, title={Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints}, volume={926}, DOI={<a href=\"https://doi.org/10.4028/p-5d009y\">10.4028/p-5d009y</a>}, journal={Key Engineering Materials}, publisher={Trans Tech Publications, Ltd.}, author={Bielak, Christian Roman and Böhnke, Max and Bobbert, Mathias and Meschut, Gerson}, year={2022}, pages={1516–1526} }","short":"C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, Key Engineering Materials 926 (2022) 1516–1526.","chicago":"Bielak, Christian Roman, Max Böhnke, Mathias Bobbert, and Gerson Meschut. “Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints.” <i>Key Engineering Materials</i> 926 (2022): 1516–26. <a href=\"https://doi.org/10.4028/p-5d009y\">https://doi.org/10.4028/p-5d009y</a>.","ieee":"C. R. Bielak, M. Böhnke, M. Bobbert, and G. Meschut, “Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints,” <i>Key Engineering Materials</i>, vol. 926, pp. 1516–1526, 2022, doi: <a href=\"https://doi.org/10.4028/p-5d009y\">10.4028/p-5d009y</a>.","ama":"Bielak CR, Böhnke M, Bobbert M, Meschut G. Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints. <i>Key Engineering Materials</i>. 2022;926:1516-1526. doi:<a href=\"https://doi.org/10.4028/p-5d009y\">10.4028/p-5d009y</a>"},"department":[{"_id":"157"}],"user_id":"7850","_id":"32413","type":"journal_article","status":"public","date_created":"2022-07-25T11:16:15Z","publisher":"Trans Tech Publications, Ltd.","title":"Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints","quality_controlled":"1","year":"2022","language":[{"iso":"eng"}],"keyword":["Mechanical Engineering","Mechanics of Materials","General Materials Science"],"publication":"Key Engineering Materials","abstract":[{"lang":"eng","text":"Background. Clinching is a conventional cold forming process in which two or more sheets can be joined without auxiliary parts. A pre-forming of the parts to be joined, which is introduced by previous manufacturing steps, has an influence on the joining result. When considering the suitability for joining with regard to the formability of the materials, the influence of the preforming steps must be taken into account. The influences of strain hardening and sheet thickness on the joining properties must be investigated. In this context, a Finite Element Method (FEM) based metamodel analysis of the clinching process was carried out in [1] to investigate the robustness of the clinching process with respect to the different material pre-strains. In [2], the method was extended to the load bearing simulation.Procedure. The metamodel from preliminary work based on various FE models, which predicts the load-bearing capacity of a clinched joint influenced by pre-straining, is compared here with experimental data and the accuracy of the metamodel prediction is discussed. For this purpose an experimental procedure was further develop which allows the preforming of metal sheets from which joining specimens can be separated with a certain degree of unidirectional deformation. In the study, the procedure for preparing the joint specimens and the results of the loading tests are presented. Different possible relevant pre-strain combinations are investigated and compared with the simulation results, to validate the FE models and choose suitable metamodel.</jats:p>"}]},{"department":[{"_id":"15"},{"_id":"230"},{"_id":"623"}],"user_id":"83846","_id":"33672","article_number":"034004","type":"journal_article","status":"public","volume":4,"author":[{"first_name":"Frederik","last_name":"Thiele","orcid":"0000-0003-0663-5587","full_name":"Thiele, Frederik","id":"50819"},{"first_name":"Felix","full_name":"vom Bruch, Felix","id":"71245","last_name":"vom Bruch"},{"id":"44807","full_name":"Brockmeier, Julian","last_name":"Brockmeier","first_name":"Julian"},{"first_name":"Maximilian","id":"46170","full_name":"Protte, Maximilian","last_name":"Protte"},{"first_name":"Thomas","last_name":"Hummel","id":"83846","full_name":"Hummel, Thomas"},{"first_name":"Raimund","last_name":"Ricken","full_name":"Ricken, Raimund"},{"full_name":"Quiring, Viktor","last_name":"Quiring","first_name":"Viktor"},{"last_name":"Lengeling","full_name":"Lengeling, Sebastian","id":"44373","first_name":"Sebastian"},{"first_name":"Harald","id":"216","full_name":"Herrmann, Harald","last_name":"Herrmann"},{"id":"13244","full_name":"Eigner, Christof","last_name":"Eigner","orcid":"https://orcid.org/0000-0002-5693-3083","first_name":"Christof"},{"full_name":"Silberhorn, Christine","id":"26263","last_name":"Silberhorn","first_name":"Christine"},{"first_name":"Tim","last_name":"Bartley","id":"49683","full_name":"Bartley, Tim"}],"date_updated":"2023-01-12T15:16:35Z","doi":"10.1088/2515-7647/ac6c63","publication_identifier":{"issn":["2515-7647"]},"publication_status":"published","intvolume":"         4","citation":{"ieee":"F. Thiele <i>et al.</i>, “Cryogenic electro-optic modulation in titanium in-diffused lithium niobate waveguides,” <i>Journal of Physics: Photonics</i>, vol. 4, no. 3, Art. no. 034004, 2022, doi: <a href=\"https://doi.org/10.1088/2515-7647/ac6c63\">10.1088/2515-7647/ac6c63</a>.","chicago":"Thiele, Frederik, Felix vom Bruch, Julian Brockmeier, Maximilian Protte, Thomas Hummel, Raimund Ricken, Viktor Quiring, et al. “Cryogenic Electro-Optic Modulation in Titanium in-Diffused Lithium Niobate Waveguides.” <i>Journal of Physics: Photonics</i> 4, no. 3 (2022). <a href=\"https://doi.org/10.1088/2515-7647/ac6c63\">https://doi.org/10.1088/2515-7647/ac6c63</a>.","ama":"Thiele F, vom Bruch F, Brockmeier J, et al. Cryogenic electro-optic modulation in titanium in-diffused lithium niobate waveguides. <i>Journal of Physics: Photonics</i>. 2022;4(3). doi:<a href=\"https://doi.org/10.1088/2515-7647/ac6c63\">10.1088/2515-7647/ac6c63</a>","apa":"Thiele, F., vom Bruch, F., Brockmeier, J., Protte, M., Hummel, T., Ricken, R., Quiring, V., Lengeling, S., Herrmann, H., Eigner, C., Silberhorn, C., &#38; Bartley, T. (2022). Cryogenic electro-optic modulation in titanium in-diffused lithium niobate waveguides. <i>Journal of Physics: Photonics</i>, <i>4</i>(3), Article 034004. <a href=\"https://doi.org/10.1088/2515-7647/ac6c63\">https://doi.org/10.1088/2515-7647/ac6c63</a>","mla":"Thiele, Frederik, et al. “Cryogenic Electro-Optic Modulation in Titanium in-Diffused Lithium Niobate Waveguides.” <i>Journal of Physics: Photonics</i>, vol. 4, no. 3, 034004, IOP Publishing, 2022, doi:<a href=\"https://doi.org/10.1088/2515-7647/ac6c63\">10.1088/2515-7647/ac6c63</a>.","short":"F. Thiele, F. vom Bruch, J. Brockmeier, M. Protte, T. Hummel, R. Ricken, V. Quiring, S. Lengeling, H. Herrmann, C. Eigner, C. Silberhorn, T. Bartley, Journal of Physics: Photonics 4 (2022).","bibtex":"@article{Thiele_vom Bruch_Brockmeier_Protte_Hummel_Ricken_Quiring_Lengeling_Herrmann_Eigner_et al._2022, title={Cryogenic electro-optic modulation in titanium in-diffused lithium niobate waveguides}, volume={4}, DOI={<a href=\"https://doi.org/10.1088/2515-7647/ac6c63\">10.1088/2515-7647/ac6c63</a>}, number={3034004}, journal={Journal of Physics: Photonics}, publisher={IOP Publishing}, author={Thiele, Frederik and vom Bruch, Felix and Brockmeier, Julian and Protte, Maximilian and Hummel, Thomas and Ricken, Raimund and Quiring, Viktor and Lengeling, Sebastian and Herrmann, Harald and Eigner, Christof and et al.}, year={2022} }"},"language":[{"iso":"eng"}],"keyword":["Electrical and Electronic Engineering","Atomic and Molecular Physics","and Optics","Electronic","Optical and Magnetic Materials"],"publication":"Journal of Physics: Photonics","abstract":[{"text":"<jats:title>Abstract</jats:title>\r\n               <jats:p>Lithium niobate is a promising platform for integrated quantum optics. In this platform, we aim to efficiently manipulate and detect quantum states by combining superconducting single photon detectors and modulators. The cryogenic operation of a superconducting single photon detector dictates the optimisation of the electro-optic modulators under the same operating conditions. To that end, we characterise a phase modulator, directional coupler, and polarisation converter at both ambient and cryogenic temperatures. The operation voltage <jats:inline-formula>\r\n                     <jats:tex-math><?CDATA $V_{\\pi/2}$?></jats:tex-math>\r\n                     <mml:math xmlns:mml=\"http://www.w3.org/1998/Math/MathML\" overflow=\"scroll\">\r\n                        <mml:msub>\r\n                           <mml:mi>V</mml:mi>\r\n                           <mml:mrow>\r\n                              <mml:mi>π</mml:mi>\r\n                              <mml:mrow>\r\n                                 <mml:mo>/</mml:mo>\r\n                              </mml:mrow>\r\n                              <mml:mn>2</mml:mn>\r\n                           </mml:mrow>\r\n                        </mml:msub>\r\n                     </mml:math>\r\n                     <jats:inline-graphic xmlns:xlink=\"http://www.w3.org/1999/xlink\" xlink:href=\"jpphotonac6c63ieqn1.gif\" xlink:type=\"simple\" />\r\n                  </jats:inline-formula> of these modulators increases, due to the decrease in the electro-optic effect, by 74% for the phase modulator, 84% for the directional coupler and 35% for the polarisation converter below 8.5<jats:inline-formula>\r\n                     <jats:tex-math><?CDATA $\\,\\mathrm{K}$?></jats:tex-math>\r\n                     <mml:math xmlns:mml=\"http://www.w3.org/1998/Math/MathML\" overflow=\"scroll\">\r\n                        <mml:mrow>\r\n                           <mml:mi mathvariant=\"normal\">K</mml:mi>\r\n                        </mml:mrow>\r\n                     </mml:math>\r\n                     <jats:inline-graphic xmlns:xlink=\"http://www.w3.org/1999/xlink\" xlink:href=\"jpphotonac6c63ieqn2.gif\" xlink:type=\"simple\" />\r\n                  </jats:inline-formula>. The phase modulator preserves its broadband nature and modulates light in the characterised wavelength range. The unbiased bar state of the directional coupler changed by a wavelength shift of 85<jats:inline-formula>\r\n                     <jats:tex-math><?CDATA $\\,\\mathrm{nm}$?></jats:tex-math>\r\n                     <mml:math xmlns:mml=\"http://www.w3.org/1998/Math/MathML\" overflow=\"scroll\">\r\n                        <mml:mrow>\r\n                           <mml:mi mathvariant=\"normal\">n</mml:mi>\r\n                           <mml:mi mathvariant=\"normal\">m</mml:mi>\r\n                        </mml:mrow>\r\n                     </mml:math>\r\n                     <jats:inline-graphic xmlns:xlink=\"http://www.w3.org/1999/xlink\" xlink:href=\"jpphotonac6c63ieqn3.gif\" xlink:type=\"simple\" />\r\n                  </jats:inline-formula> while cooling the device down to 5<jats:inline-formula>\r\n                     <jats:tex-math><?CDATA $\\,\\mathrm{K}$?></jats:tex-math>\r\n                     <mml:math xmlns:mml=\"http://www.w3.org/1998/Math/MathML\" overflow=\"scroll\">\r\n                        <mml:mrow>\r\n                           <mml:mi mathvariant=\"normal\">K</mml:mi>\r\n                        </mml:mrow>\r\n                     </mml:math>\r\n                     <jats:inline-graphic xmlns:xlink=\"http://www.w3.org/1999/xlink\" xlink:href=\"jpphotonac6c63ieqn4.gif\" xlink:type=\"simple\" />\r\n                  </jats:inline-formula>. The polarisation converter uses periodic poling to phasematch the two orthogonal polarisations. The phasematched wavelength of the utilised poling changes by 112<jats:inline-formula>\r\n                     <jats:tex-math><?CDATA $\\,\\mathrm{nm}$?></jats:tex-math>\r\n                     <mml:math xmlns:mml=\"http://www.w3.org/1998/Math/MathML\" overflow=\"scroll\">\r\n                        <mml:mrow>\r\n                           <mml:mi mathvariant=\"normal\">n</mml:mi>\r\n                           <mml:mi mathvariant=\"normal\">m</mml:mi>\r\n                        </mml:mrow>\r\n                     </mml:math>\r\n                     <jats:inline-graphic xmlns:xlink=\"http://www.w3.org/1999/xlink\" xlink:href=\"jpphotonac6c63ieqn5.gif\" xlink:type=\"simple\" />\r\n                  </jats:inline-formula> when cooling to 5<jats:inline-formula>\r\n                     <jats:tex-math><?CDATA $\\,\\mathrm{K}$?></jats:tex-math>\r\n                     <mml:math xmlns:mml=\"http://www.w3.org/1998/Math/MathML\" overflow=\"scroll\">\r\n                        <mml:mrow>\r\n                           <mml:mi mathvariant=\"normal\">K</mml:mi>\r\n                        </mml:mrow>\r\n                     </mml:math>\r\n                     <jats:inline-graphic xmlns:xlink=\"http://www.w3.org/1999/xlink\" xlink:href=\"jpphotonac6c63ieqn6.gif\" xlink:type=\"simple\" />\r\n                  </jats:inline-formula>.</jats:p>","lang":"eng"}],"date_created":"2022-10-11T07:14:40Z","publisher":"IOP Publishing","title":"Cryogenic electro-optic modulation in titanium in-diffused lithium niobate waveguides","issue":"3","year":"2022"},{"article_type":"original","extern":"1","_id":"47985","user_id":"22501","status":"public","type":"journal_article","doi":"10.1021/acsanm.2c01919","date_updated":"2023-10-11T08:55:16Z","volume":5,"author":[{"full_name":"Beccard, Henrik","last_name":"Beccard","first_name":"Henrik"},{"first_name":"Benjamin","full_name":"Kirbus, Benjamin","last_name":"Kirbus"},{"first_name":"Elke","full_name":"Beyreuther, Elke","last_name":"Beyreuther"},{"first_name":"Michael","last_name":"Rüsing","orcid":"0000-0003-4682-4577","id":"22501","full_name":"Rüsing, Michael"},{"first_name":"Petr","full_name":"Bednyakov, Petr","last_name":"Bednyakov"},{"last_name":"Hlinka","full_name":"Hlinka, Jiří","first_name":"Jiří"},{"first_name":"Lukas M.","full_name":"Eng, Lukas M.","last_name":"Eng"}],"intvolume":"         5","page":"8717-8722","citation":{"apa":"Beccard, H., Kirbus, B., Beyreuther, E., Rüsing, M., Bednyakov, P., Hlinka, J., &#38; Eng, L. M. (2022). Nanoscale Conductive Sheets in Ferroelectric BaTiO3: Large Hall Electron Mobilities at Head-to-Head Domain Walls. <i>ACS Applied Nano Materials</i>, <i>5</i>(7), 8717–8722. <a href=\"https://doi.org/10.1021/acsanm.2c01919\">https://doi.org/10.1021/acsanm.2c01919</a>","short":"H. Beccard, B. Kirbus, E. Beyreuther, M. Rüsing, P. Bednyakov, J. Hlinka, L.M. Eng, ACS Applied Nano Materials 5 (2022) 8717–8722.","mla":"Beccard, Henrik, et al. “Nanoscale Conductive Sheets in Ferroelectric BaTiO3: Large Hall Electron Mobilities at Head-to-Head Domain Walls.” <i>ACS Applied Nano Materials</i>, vol. 5, no. 7, American Chemical Society (ACS), 2022, pp. 8717–22, doi:<a href=\"https://doi.org/10.1021/acsanm.2c01919\">10.1021/acsanm.2c01919</a>.","bibtex":"@article{Beccard_Kirbus_Beyreuther_Rüsing_Bednyakov_Hlinka_Eng_2022, title={Nanoscale Conductive Sheets in Ferroelectric BaTiO3: Large Hall Electron Mobilities at Head-to-Head Domain Walls}, volume={5}, DOI={<a href=\"https://doi.org/10.1021/acsanm.2c01919\">10.1021/acsanm.2c01919</a>}, number={7}, journal={ACS Applied Nano Materials}, publisher={American Chemical Society (ACS)}, author={Beccard, Henrik and Kirbus, Benjamin and Beyreuther, Elke and Rüsing, Michael and Bednyakov, Petr and Hlinka, Jiří and Eng, Lukas M.}, year={2022}, pages={8717–8722} }","ama":"Beccard H, Kirbus B, Beyreuther E, et al. Nanoscale Conductive Sheets in Ferroelectric BaTiO3: Large Hall Electron Mobilities at Head-to-Head Domain Walls. <i>ACS Applied Nano Materials</i>. 2022;5(7):8717-8722. doi:<a href=\"https://doi.org/10.1021/acsanm.2c01919\">10.1021/acsanm.2c01919</a>","chicago":"Beccard, Henrik, Benjamin Kirbus, Elke Beyreuther, Michael Rüsing, Petr Bednyakov, Jiří Hlinka, and Lukas M. Eng. “Nanoscale Conductive Sheets in Ferroelectric BaTiO3: Large Hall Electron Mobilities at Head-to-Head Domain Walls.” <i>ACS Applied Nano Materials</i> 5, no. 7 (2022): 8717–22. <a href=\"https://doi.org/10.1021/acsanm.2c01919\">https://doi.org/10.1021/acsanm.2c01919</a>.","ieee":"H. Beccard <i>et al.</i>, “Nanoscale Conductive Sheets in Ferroelectric BaTiO3: Large Hall Electron Mobilities at Head-to-Head Domain Walls,” <i>ACS Applied Nano Materials</i>, vol. 5, no. 7, pp. 8717–8722, 2022, doi: <a href=\"https://doi.org/10.1021/acsanm.2c01919\">10.1021/acsanm.2c01919</a>."},"publication_identifier":{"issn":["2574-0970","2574-0970"]},"publication_status":"published","keyword":["General Materials Science"],"language":[{"iso":"eng"}],"abstract":[{"lang":"eng","text":"Strongly charged head-to-head domain walls that are purposely engineered along the [110] crystallographic orientation into ferroelectric BaTiO3 single crystals have been proposed as intrinsically nanoscaled two-dimensional electron gases (2DEGs) because of their significant conductivity. Here, we quantify these 2DEG properties through dedicated Hall transport measurements in van der Pauw 4-point geometry, finding the electron mobility to reach around 400 cm2 (V s)^{−1}, while the two-dimensional charge density amounts to 7 × 103 cm^{–2}. We underline the necessity to take into account the thermal and geometrical misalignment offset voltages by evaluating the Hall resistance under magnetic field sweeps; otherwise, errors of several hundred percent in the derived transport parameters can occur."}],"publication":"ACS Applied Nano Materials","title":"Nanoscale Conductive Sheets in Ferroelectric BaTiO3: Large Hall Electron Mobilities at Head-to-Head Domain Walls","publisher":"American Chemical Society (ACS)","date_created":"2023-10-11T08:54:20Z","year":"2022","quality_controlled":"1","issue":"7"},{"year":"2022","citation":{"apa":"Duderija, B., González-Orive, A., Schmidt, H. C., Calderón, J. C., Hordych, I., Maier, H. J., Homberg, W., &#38; Grundmeier, G. (2022). Electrografting of BTSE: Zn films for advanced steel-aluminum joining by plastic deformation. <i>Journal of Advanced Joining Processes</i>, <i>7</i>, Article 100137. <a href=\"https://doi.org/10.1016/j.jajp.2022.100137\">https://doi.org/10.1016/j.jajp.2022.100137</a>","bibtex":"@article{Duderija_González-Orive_Schmidt_Calderón_Hordych_Maier_Homberg_Grundmeier_2022, title={Electrografting of BTSE: Zn films for advanced steel-aluminum joining by plastic deformation}, volume={7}, DOI={<a href=\"https://doi.org/10.1016/j.jajp.2022.100137\">10.1016/j.jajp.2022.100137</a>}, number={100137}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Duderija, B. and González-Orive, A. and Schmidt, H.C. and Calderón, J.C. and Hordych, I. and Maier, H.J. and Homberg, W. and Grundmeier, G.}, year={2022} }","mla":"Duderija, B., et al. “Electrografting of BTSE: Zn Films for Advanced Steel-Aluminum Joining by Plastic Deformation.” <i>Journal of Advanced Joining Processes</i>, vol. 7, 100137, Elsevier BV, 2022, doi:<a href=\"https://doi.org/10.1016/j.jajp.2022.100137\">10.1016/j.jajp.2022.100137</a>.","short":"B. Duderija, A. González-Orive, H.C. Schmidt, J.C. Calderón, I. Hordych, H.J. Maier, W. Homberg, G. Grundmeier, Journal of Advanced Joining Processes 7 (2022).","chicago":"Duderija, B., A. González-Orive, H.C. Schmidt, J.C. Calderón, I. Hordych, H.J. Maier, W. Homberg, and G. Grundmeier. “Electrografting of BTSE: Zn Films for Advanced Steel-Aluminum Joining by Plastic Deformation.” <i>Journal of Advanced Joining Processes</i> 7 (2022). <a href=\"https://doi.org/10.1016/j.jajp.2022.100137\">https://doi.org/10.1016/j.jajp.2022.100137</a>.","ieee":"B. Duderija <i>et al.</i>, “Electrografting of BTSE: Zn films for advanced steel-aluminum joining by plastic deformation,” <i>Journal of Advanced Joining Processes</i>, vol. 7, Art. no. 100137, 2022, doi: <a href=\"https://doi.org/10.1016/j.jajp.2022.100137\">10.1016/j.jajp.2022.100137</a>.","ama":"Duderija B, González-Orive A, Schmidt HC, et al. Electrografting of BTSE: Zn films for advanced steel-aluminum joining by plastic deformation. <i>Journal of Advanced Joining Processes</i>. 2022;7. doi:<a href=\"https://doi.org/10.1016/j.jajp.2022.100137\">10.1016/j.jajp.2022.100137</a>"},"intvolume":"         7","publication_status":"published","publication_identifier":{"issn":["2666-3309"]},"title":"Electrografting of BTSE: Zn films for advanced steel-aluminum joining by plastic deformation","doi":"10.1016/j.jajp.2022.100137","date_updated":"2024-02-06T12:33:20Z","publisher":"Elsevier BV","date_created":"2023-03-14T13:02:55Z","author":[{"first_name":"B.","last_name":"Duderija","full_name":"Duderija, B."},{"last_name":"González-Orive","full_name":"González-Orive, A.","first_name":"A."},{"full_name":"Schmidt, H.C.","last_name":"Schmidt","first_name":"H.C."},{"first_name":"J.C.","last_name":"Calderón","full_name":"Calderón, J.C."},{"full_name":"Hordych, I.","last_name":"Hordych","first_name":"I."},{"first_name":"H.J.","last_name":"Maier","full_name":"Maier, H.J."},{"first_name":"W.","last_name":"Homberg","full_name":"Homberg, W."},{"last_name":"Grundmeier","full_name":"Grundmeier, G.","first_name":"G."}],"volume":7,"status":"public","type":"journal_article","publication":"Journal of Advanced Joining Processes","article_number":"100137","keyword":["Mechanical Engineering","Mechanics of Materials","Engineering (miscellaneous)","Chemical Engineering (miscellaneous)"],"language":[{"iso":"eng"}],"_id":"43021","user_id":"54863","department":[{"_id":"321"},{"_id":"302"}]},{"abstract":[{"text":"AlSi casting alloys combine excellent castability with high strength. Hence, this group of alloys is often used in the automotive sector. The challenge for this application is the brittle character of these alloys which leads to cracks during joint formation when mechanical joining technologies are used. A rise in ductility can be achieved by a considerable increase in the solidification rate which results in grain refinement. High solidification rates can be realized in twin–roll casting (TRC) by water-cooled rolls. Therefore, a hypoeutectic EN AC–AlSi9 (for European Norm - aluminum cast product) is manufactured by the TRC process and analyzed. Subsequently, joining investigations are performed on castings in as-cast and heat-treated condition using the self-piercing riveting process considering the joint formation and the load-bearing capacity. Due to the fine microstructure, the crack initiation can be avoided during joining, while maintaining the joining parameters, especially by specimens in heat treatment conditions. Furthermore, due to the extremely fine microstructure, the load-bearing capacity of the joint can be significantly increased in terms of the maximum load-bearing force and the energy absorbed.","lang":"eng"}],"publication":"Advanced Engineering Materials","language":[{"iso":"eng"}],"keyword":["Condensed Matter Physics","General Materials Science"],"year":"2022","issue":"10","quality_controlled":"1","title":"Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting","date_created":"2023-01-12T09:33:55Z","publisher":"Wiley","status":"public","type":"journal_article","article_type":"original","article_number":"2200874","department":[{"_id":"158"},{"_id":"157"},{"_id":"321"}],"user_id":"32340","_id":"36332","project":[{"name":"TRR 285 – A02: TRR 285 - Subproject A02","_id":"136"},{"_id":"131","name":"TRR 285 - A: TRR 285 - Project Area A"},{"name":"TRR 285 - C: TRR 285 - Project Area C","_id":"133"},{"_id":"146","name":"TRR 285 – C02: TRR 285 - Subproject C02"}],"intvolume":"        24","citation":{"chicago":"Neuser, Moritz, Fabian Kappe, Jakob Ostermeier, Jan Tobias Krüger, Mathias Bobbert, Gerson Meschut, Mirko Schaper, and Olexandr Grydin. “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting.” <i>Advanced Engineering Materials</i> 24, no. 10 (2022). <a href=\"https://doi.org/10.1002/adem.202200874\">https://doi.org/10.1002/adem.202200874</a>.","ieee":"M. Neuser <i>et al.</i>, “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting,” <i>Advanced Engineering Materials</i>, vol. 24, no. 10, Art. no. 2200874, 2022, doi: <a href=\"https://doi.org/10.1002/adem.202200874\">10.1002/adem.202200874</a>.","ama":"Neuser M, Kappe F, Ostermeier J, et al. Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting. <i>Advanced Engineering Materials</i>. 2022;24(10). doi:<a href=\"https://doi.org/10.1002/adem.202200874\">10.1002/adem.202200874</a>","apa":"Neuser, M., Kappe, F., Ostermeier, J., Krüger, J. T., Bobbert, M., Meschut, G., Schaper, M., &#38; Grydin, O. (2022). Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting. <i>Advanced Engineering Materials</i>, <i>24</i>(10), Article 2200874. <a href=\"https://doi.org/10.1002/adem.202200874\">https://doi.org/10.1002/adem.202200874</a>","mla":"Neuser, Moritz, et al. “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting.” <i>Advanced Engineering Materials</i>, vol. 24, no. 10, 2200874, Wiley, 2022, doi:<a href=\"https://doi.org/10.1002/adem.202200874\">10.1002/adem.202200874</a>.","short":"M. Neuser, F. Kappe, J. Ostermeier, J.T. Krüger, M. Bobbert, G. Meschut, M. Schaper, O. Grydin, Advanced Engineering Materials 24 (2022).","bibtex":"@article{Neuser_Kappe_Ostermeier_Krüger_Bobbert_Meschut_Schaper_Grydin_2022, title={Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting}, volume={24}, DOI={<a href=\"https://doi.org/10.1002/adem.202200874\">10.1002/adem.202200874</a>}, number={102200874}, journal={Advanced Engineering Materials}, publisher={Wiley}, author={Neuser, Moritz and Kappe, Fabian and Ostermeier, Jakob and Krüger, Jan Tobias and Bobbert, Mathias and Meschut, Gerson and Schaper, Mirko and Grydin, Olexandr}, year={2022} }"},"publication_identifier":{"issn":["1438-1656","1527-2648"]},"publication_status":"published","doi":"10.1002/adem.202200874","main_file_link":[{"open_access":"1","url":"https://onlinelibrary.wiley.com/doi/full/10.1002/adem.202200874"}],"volume":24,"author":[{"full_name":"Neuser, Moritz","id":"32340","last_name":"Neuser","first_name":"Moritz"},{"full_name":"Kappe, Fabian","id":"66459","last_name":"Kappe","first_name":"Fabian"},{"last_name":"Ostermeier","full_name":"Ostermeier, Jakob","first_name":"Jakob"},{"last_name":"Krüger","orcid":"0000-0002-0827-9654","id":"44307","full_name":"Krüger, Jan Tobias","first_name":"Jan Tobias"},{"first_name":"Mathias","last_name":"Bobbert","id":"7850","full_name":"Bobbert, Mathias"},{"id":"32056","full_name":"Meschut, Gerson","last_name":"Meschut","orcid":"0000-0002-2763-1246","first_name":"Gerson"},{"last_name":"Schaper","full_name":"Schaper, Mirko","id":"43720","first_name":"Mirko"},{"first_name":"Olexandr","last_name":"Grydin","id":"43822","full_name":"Grydin, Olexandr"}],"date_updated":"2024-03-14T15:22:33Z","oa":"1"},{"abstract":[{"lang":"eng","text":"<jats:p> In many manufacturing areas, multi-material designs are implemented in which individual components are joined together to form complex structures with numerous joints. For example, in the automotive sector, cast components are used at the junctions of the body and joined with different types of sheet metal and extruded profiles. To be able to join structures consisting of different materials, alternative joining technologies have emerged in recent years. This includes clinching, which allows assembling of two or more thin sheet metal and casting parts by solely cold forming the material. Clinching the brittle and usually less ductile cast aluminium alloys remains a challenge because the brittle character of the cast aluminium alloys can cause cracks during the forming of the clinched joint. In this study, the influence of the heat treatment time of an aluminium casting alloy AlSi9 on the joinability in the clinching process is investigated. Specific heat treatment of the naturally hard AlSi9 leads to a modification of the eutectic microstructure, which can increase ductility. Based on this, it will be examined if specific clinching die geometries can be used, which achieve an optimized geometrical formation of the clinched joint. The load-bearing capacities of the clinched joints are determined and compared by shear tensile and head tensile tests. Furthermore, the joints are examined microscopically to investigate the influence of the heat treatment on the failure behaviour during the load-bearing tests as well as crack initiation within the joining process. </jats:p>"}],"publication":"Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications","language":[{"iso":"eng"}],"keyword":["Mechanical Engineering","General Materials Science"],"year":"2022","quality_controlled":"1","title":"Influence of heat treatment on the suitability for clinching of the aluminium casting alloy AlSi9","date_created":"2022-02-02T09:05:45Z","publisher":"SAGE Publications","status":"public","type":"journal_article","article_number":"146442072210758","department":[{"_id":"630"},{"_id":"158"},{"_id":"157"}],"user_id":"32340","_id":"29724","project":[{"_id":"130","name":"TRR 285: TRR 285","grant_number":"418701707"},{"_id":"131","name":"TRR 285 - A: TRR 285 - Project Area A"},{"name":"TRR 285 – A02: TRR 285 - Subproject A02","_id":"136"},{"name":"TRR 285 - A: TRR 285 - Project Area A","_id":"131"},{"_id":"135","name":"TRR 285 – A01: TRR 285 - Subproject A01"}],"citation":{"apa":"Neuser, M., Böhnke, M., Grydin, O., Bobbert, M., Schaper, M., &#38; Meschut, G. (2022). Influence of heat treatment on the suitability for clinching of the aluminium casting alloy AlSi9. <i>Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications</i>, Article 146442072210758. <a href=\"https://doi.org/10.1177/14644207221075838\">https://doi.org/10.1177/14644207221075838</a>","short":"M. Neuser, M. Böhnke, O. Grydin, M. Bobbert, M. Schaper, G. Meschut, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2022).","bibtex":"@article{Neuser_Böhnke_Grydin_Bobbert_Schaper_Meschut_2022, title={Influence of heat treatment on the suitability for clinching of the aluminium casting alloy AlSi9}, DOI={<a href=\"https://doi.org/10.1177/14644207221075838\">10.1177/14644207221075838</a>}, number={146442072210758}, journal={Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications}, publisher={SAGE Publications}, author={Neuser, Moritz and Böhnke, Max and Grydin, Olexandr and Bobbert, Mathias and Schaper, Mirko and Meschut, Gerson}, year={2022} }","mla":"Neuser, Moritz, et al. “Influence of Heat Treatment on the Suitability for Clinching of the Aluminium Casting Alloy AlSi9.” <i>Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications</i>, 146442072210758, SAGE Publications, 2022, doi:<a href=\"https://doi.org/10.1177/14644207221075838\">10.1177/14644207221075838</a>.","ama":"Neuser M, Böhnke M, Grydin O, Bobbert M, Schaper M, Meschut G. Influence of heat treatment on the suitability for clinching of the aluminium casting alloy AlSi9. <i>Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications</i>. Published online 2022. doi:<a href=\"https://doi.org/10.1177/14644207221075838\">10.1177/14644207221075838</a>","chicago":"Neuser, Moritz, Max Böhnke, Olexandr Grydin, Mathias Bobbert, Mirko Schaper, and Gerson Meschut. “Influence of Heat Treatment on the Suitability for Clinching of the Aluminium Casting Alloy AlSi9.” <i>Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications</i>, 2022. <a href=\"https://doi.org/10.1177/14644207221075838\">https://doi.org/10.1177/14644207221075838</a>.","ieee":"M. Neuser, M. Böhnke, O. Grydin, M. Bobbert, M. Schaper, and G. Meschut, “Influence of heat treatment on the suitability for clinching of the aluminium casting alloy AlSi9,” <i>Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications</i>, Art. no. 146442072210758, 2022, doi: <a href=\"https://doi.org/10.1177/14644207221075838\">10.1177/14644207221075838</a>."},"publication_identifier":{"issn":["1464-4207","2041-3076"]},"publication_status":"published","doi":"10.1177/14644207221075838","author":[{"first_name":"Moritz","last_name":"Neuser","full_name":"Neuser, Moritz","id":"32340"},{"last_name":"Böhnke","full_name":"Böhnke, Max","id":"45779","first_name":"Max"},{"first_name":"Olexandr","full_name":"Grydin, Olexandr","id":"43822","last_name":"Grydin"},{"full_name":"Bobbert, Mathias","id":"7850","last_name":"Bobbert","first_name":"Mathias"},{"id":"43720","full_name":"Schaper, Mirko","last_name":"Schaper","first_name":"Mirko"},{"orcid":"0000-0002-2763-1246","last_name":"Meschut","id":"32056","full_name":"Meschut, Gerson","first_name":"Gerson"}],"date_updated":"2024-03-14T15:20:44Z"}]