[{"date_created":"2024-02-06T15:04:45Z","department":[{"_id":"157"},{"_id":"43"}],"type":"journal_article","keyword":["Mechanical Engineering","Mechanics of Materials","General Materials Science"],"publication":"Key Engineering Materials","abstract":[{"lang":"eng","text":"Clinching is a cost efficient method for joining components in series production. To assure the clinch point’s quality, the force displacement curve during clinching or the bottom thickness are monitored. The most significant geometrical characteristics of the clinch point, neck thickness and undercut, are usually tested destructively by microsectioning. However, micrograph preparation goes ahead with a resetting of elastic deformations and crack-closing after unloading. To generate a comprehensive knowledge of the clinch point’s inner geometry under load, in-situ computed tomography (CT) and acoustic testing (TDA) can be combined. While the TDA is highly sensitive to the inner state of the clinch point, it could detect critical events like crack development during loading. If such events are indicated, the loading process is stopped and a stepped in-situ CT of the following crack and deformation development is performed. In this paper, the concept is applied to the process of clinching itself, providing a detailed three-dimensional insight in the development of the joining zone. A test set-up is used which allows a stepwise clinching of two aluminium sheets EN AW 6014. Furthermore, this set-up is positioned within a CT system. In order to minimize X-ray absorption, a beryllium cylinder is used within the set-up frame and clinching tools are made from Si3N4. The actuator and sensor necessary for the TDA are integrated in the set-up. In regular process steps, the clinching process is interrupted in order to perform a TDA and a CT scan. In order to enhance the visibility of the interface, a thin tin layer is positioned between the sheets prior clinching. It is shown, that the test-set up allows a monitoring of the dynamic behaviour of the specimen during clinching while the CT scans visualize the inner geometry and material flow non-destructively."}],"language":[{"iso":"eng"}],"doi":"10.4028/p-32330d","author":[{"first_name":"Daniel","last_name":"Köhler","full_name":"Köhler, Daniel"},{"full_name":"Stephan, Richard","last_name":"Stephan","first_name":"Richard"},{"full_name":"Kupfer, Robert","last_name":"Kupfer","first_name":"Robert"},{"full_name":"Troschitz, Juliane","last_name":"Troschitz","first_name":"Juliane"},{"first_name":"Alexander","last_name":"Brosius","full_name":"Brosius, Alexander"},{"full_name":"Gude, Maik","last_name":"Gude","first_name":"Maik"}],"publication_identifier":{"issn":["1662-9795"]},"year":"2022","title":"Investigations on Combined <i>In Situ</i> CT and Acoustic Analysis during Clinching","intvolume":" 926","date_updated":"2025-06-02T20:21:13Z","publication_status":"published","citation":{"ama":"Köhler D, Stephan R, Kupfer R, Troschitz J, Brosius A, Gude M. Investigations on Combined <i>In Situ</i> CT and Acoustic Analysis during Clinching. Key Engineering Materials. 2022;926:1489-1497. doi:10.4028/p-32330d","bibtex":"@article{Köhler_Stephan_Kupfer_Troschitz_Brosius_Gude_2022, title={Investigations on Combined <i>In Situ</i> CT and Acoustic Analysis during Clinching}, volume={926}, DOI={10.4028/p-32330d}, journal={Key Engineering Materials}, publisher={Trans Tech Publications, Ltd.}, author={Köhler, Daniel and Stephan, Richard and Kupfer, Robert and Troschitz, Juliane and Brosius, Alexander and Gude, Maik}, year={2022}, pages={1489–1497} }","mla":"Köhler, Daniel, et al. “Investigations on Combined <I>In Situ</I> CT and Acoustic Analysis during Clinching.” Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1489–97, doi:10.4028/p-32330d.","short":"D. Köhler, R. Stephan, R. Kupfer, J. Troschitz, A. Brosius, M. Gude, Key Engineering Materials 926 (2022) 1489–1497.","chicago":"Köhler, Daniel, Richard Stephan, Robert Kupfer, Juliane Troschitz, Alexander Brosius, and Maik Gude. “Investigations on Combined <I>In Situ</I> CT and Acoustic Analysis during Clinching.” Key Engineering Materials 926 (2022): 1489–97. https://doi.org/10.4028/p-32330d.","apa":"Köhler, D., Stephan, R., Kupfer, R., Troschitz, J., Brosius, A., & Gude, M. (2022). Investigations on Combined <i>In Situ</i> CT and Acoustic Analysis during Clinching. Key Engineering Materials, 926, 1489–1497. https://doi.org/10.4028/p-32330d","ieee":"D. Köhler, R. Stephan, R. Kupfer, J. Troschitz, A. Brosius, and M. Gude, “Investigations on Combined <i>In Situ</i> CT and Acoustic Analysis during Clinching,” Key Engineering Materials, vol. 926, pp. 1489–1497, 2022, doi: 10.4028/p-32330d."},"project":[{"name":"TRR 285: TRR 285","grant_number":"418701707","_id":"130"},{"_id":"133","name":"TRR 285 - C: TRR 285 - Project Area C"},{"_id":"148","name":"TRR 285 – C04: TRR 285 - Subproject C04"}],"_id":"51197","publisher":"Trans Tech Publications, Ltd.","page":"1489-1497","volume":926,"user_id":"83408","status":"public"},{"citation":{"mla":"Kupfer, Robert, et al. “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties.” Journal of Advanced Joining Processes, vol. 5, 100108, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100108.","ama":"Kupfer R, Köhler D, Römisch D, et al. Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties. Journal of Advanced Joining Processes. 2022;5. doi:10.1016/j.jajp.2022.100108","bibtex":"@article{Kupfer_Köhler_Römisch_Wituschek_Ewenz_Kalich_Weiß_Sadeghian_Busch_Krüger_et al._2022, title={Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties}, volume={5}, DOI={10.1016/j.jajp.2022.100108}, number={100108}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Kupfer, Robert and Köhler, Daniel and Römisch, David and Wituschek, Simon and Ewenz, Lars and Kalich, Jan and Weiß, Deborah and Sadeghian, Behdad and Busch, Matthias and Krüger, Jan and et al.}, year={2022} }","apa":"Kupfer, R., Köhler, D., Römisch, D., Wituschek, S., Ewenz, L., Kalich, J., Weiß, D., Sadeghian, B., Busch, M., Krüger, J., Neuser, M., Grydin, O., Böhnke, M., Bielak, C.-R., & Troschitz, J. (2022). Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties. Journal of Advanced Joining Processes, 5, Article 100108. https://doi.org/10.1016/j.jajp.2022.100108","ieee":"R. Kupfer et al., “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties,” Journal of Advanced Joining Processes, vol. 5, Art. no. 100108, 2022, doi: 10.1016/j.jajp.2022.100108.","short":"R. Kupfer, D. Köhler, D. Römisch, S. Wituschek, L. Ewenz, J. Kalich, D. Weiß, B. Sadeghian, M. Busch, J. Krüger, M. Neuser, O. Grydin, M. Böhnke, C.-R. Bielak, J. Troschitz, Journal of Advanced Joining Processes 5 (2022).","chicago":"Kupfer, Robert, Daniel Köhler, David Römisch, Simon Wituschek, Lars Ewenz, Jan Kalich, Deborah Weiß, et al. “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties.” Journal of Advanced Joining Processes 5 (2022). https://doi.org/10.1016/j.jajp.2022.100108."},"publication":"Journal of Advanced Joining Processes","type":"journal_article","keyword":["Mechanical Engineering","Mechanics of Materials","Engineering (miscellaneous)","Chemical Engineering (miscellaneous)"],"date_created":"2024-02-06T15:01:32Z","intvolume":" 5","publication_status":"published","date_updated":"2025-06-02T20:20:08Z","author":[{"first_name":"Robert","last_name":"Kupfer","full_name":"Kupfer, Robert"},{"first_name":"Daniel","last_name":"Köhler","full_name":"Köhler, Daniel"},{"last_name":"Römisch","first_name":"David","full_name":"Römisch, David"},{"full_name":"Wituschek, Simon","first_name":"Simon","last_name":"Wituschek"},{"last_name":"Ewenz","first_name":"Lars","full_name":"Ewenz, Lars"},{"full_name":"Kalich, Jan","last_name":"Kalich","first_name":"Jan"},{"last_name":"Weiß","first_name":"Deborah","full_name":"Weiß, Deborah"},{"full_name":"Sadeghian, Behdad","first_name":"Behdad","last_name":"Sadeghian"},{"full_name":"Busch, Matthias","last_name":"Busch","first_name":"Matthias"},{"first_name":"Jan","last_name":"Krüger","full_name":"Krüger, Jan"},{"last_name":"Neuser","first_name":"Moritz","full_name":"Neuser, Moritz"},{"first_name":"Olexandr","last_name":"Grydin","full_name":"Grydin, Olexandr"},{"last_name":"Böhnke","first_name":"Max","full_name":"Böhnke, Max"},{"last_name":"Bielak","first_name":"Christian-Roman","full_name":"Bielak, Christian-Roman"},{"first_name":"Juliane","last_name":"Troschitz","full_name":"Troschitz, Juliane"}],"publication_identifier":{"issn":["2666-3309"]},"status":"public","year":"2022","title":"Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties","volume":5,"user_id":"83408","doi":"10.1016/j.jajp.2022.100108","_id":"51193","language":[{"iso":"eng"}],"publisher":"Elsevier BV","article_number":"100108"},{"date_created":"2024-02-06T15:03:43Z","type":"journal_article","keyword":["Mechanical Engineering","Mechanics of Materials","Engineering (miscellaneous)","Chemical Engineering (miscellaneous)"],"citation":{"chicago":"Meschut, G., M. Merklein, A. Brosius, D. Drummer, L. Fratini, U. Füssel, M. Gude, et al. “Review on Mechanical Joining by Plastic Deformation.” Journal of Advanced Joining Processes 5 (2022). https://doi.org/10.1016/j.jajp.2022.100113.","short":"G. Meschut, M. Merklein, A. Brosius, D. Drummer, L. Fratini, U. Füssel, M. Gude, W. Homberg, P.A.F. Martins, M. Bobbert, M. Lechner, R. Kupfer, B. Gröger, D. Han, J. Kalich, F. Kappe, T. Kleffel, D. Köhler, C.-M. Kuball, J. Popp, D. Römisch, J. Troschitz, C. Wischer, S. Wituschek, M. Wolf, Journal of Advanced Joining Processes 5 (2022).","apa":"Meschut, G., Merklein, M., Brosius, A., Drummer, D., Fratini, L., Füssel, U., Gude, M., Homberg, W., Martins, P. A. F., Bobbert, M., Lechner, M., Kupfer, R., Gröger, B., Han, D., Kalich, J., Kappe, F., Kleffel, T., Köhler, D., Kuball, C.-M., … Wolf, M. (2022). Review on mechanical joining by plastic deformation. Journal of Advanced Joining Processes, 5, Article 100113. https://doi.org/10.1016/j.jajp.2022.100113","ieee":"G. Meschut et al., “Review on mechanical joining by plastic deformation,” Journal of Advanced Joining Processes, vol. 5, Art. no. 100113, 2022, doi: 10.1016/j.jajp.2022.100113.","ama":"Meschut G, Merklein M, Brosius A, et al. Review on mechanical joining by plastic deformation. Journal of Advanced Joining Processes. 2022;5. doi:10.1016/j.jajp.2022.100113","bibtex":"@article{Meschut_Merklein_Brosius_Drummer_Fratini_Füssel_Gude_Homberg_Martins_Bobbert_et al._2022, title={Review on mechanical joining by plastic deformation}, volume={5}, DOI={10.1016/j.jajp.2022.100113}, number={100113}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Meschut, G. and Merklein, M. and Brosius, A. and Drummer, D. and Fratini, L. and Füssel, U. and Gude, M. and Homberg, W. and Martins, P.A.F. and Bobbert, M. and et al.}, year={2022} }","mla":"Meschut, G., et al. “Review on Mechanical Joining by Plastic Deformation.” Journal of Advanced Joining Processes, vol. 5, 100113, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100113."},"publication":"Journal of Advanced Joining Processes","_id":"51196","publisher":"Elsevier BV","language":[{"iso":"eng"}],"article_number":"100113","volume":5,"doi":"10.1016/j.jajp.2022.100113","user_id":"83408","publication_identifier":{"issn":["2666-3309"]},"author":[{"first_name":"G.","last_name":"Meschut","full_name":"Meschut, G."},{"full_name":"Merklein, M.","first_name":"M.","last_name":"Merklein"},{"last_name":"Brosius","first_name":"A.","full_name":"Brosius, A."},{"full_name":"Drummer, D.","first_name":"D.","last_name":"Drummer"},{"first_name":"L.","last_name":"Fratini","full_name":"Fratini, L."},{"last_name":"Füssel","first_name":"U.","full_name":"Füssel, U."},{"full_name":"Gude, M.","last_name":"Gude","first_name":"M."},{"first_name":"W.","last_name":"Homberg","full_name":"Homberg, W."},{"full_name":"Martins, P.A.F.","last_name":"Martins","first_name":"P.A.F."},{"full_name":"Bobbert, M.","last_name":"Bobbert","first_name":"M."},{"full_name":"Lechner, M.","last_name":"Lechner","first_name":"M."},{"first_name":"R.","last_name":"Kupfer","full_name":"Kupfer, R."},{"full_name":"Gröger, B.","first_name":"B.","last_name":"Gröger"},{"full_name":"Han, D.","first_name":"D.","last_name":"Han"},{"first_name":"J.","last_name":"Kalich","full_name":"Kalich, J."},{"first_name":"F.","last_name":"Kappe","full_name":"Kappe, F."},{"first_name":"T.","last_name":"Kleffel","full_name":"Kleffel, T."},{"last_name":"Köhler","first_name":"D.","full_name":"Köhler, D."},{"first_name":"C.-M.","last_name":"Kuball","full_name":"Kuball, C.-M."},{"last_name":"Popp","first_name":"J.","full_name":"Popp, J."},{"last_name":"Römisch","first_name":"D.","full_name":"Römisch, D."},{"first_name":"J.","last_name":"Troschitz","full_name":"Troschitz, J."},{"last_name":"Wischer","first_name":"C.","full_name":"Wischer, C."},{"first_name":"S.","last_name":"Wituschek","full_name":"Wituschek, S."},{"full_name":"Wolf, M.","last_name":"Wolf","first_name":"M."}],"title":"Review on mechanical joining by plastic deformation","status":"public","year":"2022","intvolume":" 5","date_updated":"2025-06-02T20:20:04Z","publication_status":"published"},{"citation":{"chicago":"Odziomek, Mateusz, Paolo Giusto, Janina Kossmann, Nadezda V. Tarakina, Julian Joachim Heske, Salvador M. Rivadeneira, Waldemar Keil, et al. “‘Red Carbon’: A Rediscovered Covalent Crystalline Semiconductor.” Advanced Materials 34, no. 40 (2022). https://doi.org/10.1002/adma.202206405.","short":"M. Odziomek, P. Giusto, J. Kossmann, N.V. Tarakina, J.J. Heske, S.M. Rivadeneira, W. Keil, C. Schmidt, S. Mazzanti, O. Savateev, L. Perdigón‐Toro, D. Neher, T. Kühne, M. Antonietti, N. López‐Salas, Advanced Materials 34 (2022).","ieee":"M. Odziomek et al., “‘Red Carbon’: A Rediscovered Covalent Crystalline Semiconductor,” Advanced Materials, vol. 34, no. 40, Art. no. 2206405, 2022, doi: 10.1002/adma.202206405.","apa":"Odziomek, M., Giusto, P., Kossmann, J., Tarakina, N. V., Heske, J. J., Rivadeneira, S. M., Keil, W., Schmidt, C., Mazzanti, S., Savateev, O., Perdigón‐Toro, L., Neher, D., Kühne, T., Antonietti, M., & López‐Salas, N. (2022). “Red Carbon”: A Rediscovered Covalent Crystalline Semiconductor. Advanced Materials, 34(40), Article 2206405. https://doi.org/10.1002/adma.202206405","bibtex":"@article{Odziomek_Giusto_Kossmann_Tarakina_Heske_Rivadeneira_Keil_Schmidt_Mazzanti_Savateev_et al._2022, title={“Red Carbon”: A Rediscovered Covalent Crystalline Semiconductor}, volume={34}, DOI={10.1002/adma.202206405}, number={402206405}, journal={Advanced Materials}, publisher={Wiley}, author={Odziomek, Mateusz and Giusto, Paolo and Kossmann, Janina and Tarakina, Nadezda V. and Heske, Julian Joachim and Rivadeneira, Salvador M. and Keil, Waldemar and Schmidt, Claudia and Mazzanti, Stefano and Savateev, Oleksandr and et al.}, year={2022} }","ama":"Odziomek M, Giusto P, Kossmann J, et al. “Red Carbon”: A Rediscovered Covalent Crystalline Semiconductor. Advanced Materials. 2022;34(40). doi:10.1002/adma.202206405","mla":"Odziomek, Mateusz, et al. “‘Red Carbon’: A Rediscovered Covalent Crystalline Semiconductor.” Advanced Materials, vol. 34, no. 40, 2206405, Wiley, 2022, doi:10.1002/adma.202206405."},"quality_controlled":"1","status":"public","publisher":"Wiley","_id":"33687","volume":34,"user_id":"466","publication":"Advanced Materials","issue":"40","date_created":"2022-10-11T08:19:29Z","department":[{"_id":"613"},{"_id":"315"}],"type":"journal_article","keyword":["Mechanical Engineering","Mechanics of Materials","General Materials Science"],"publication_identifier":{"issn":["0935-9648","1521-4095"]},"author":[{"full_name":"Odziomek, Mateusz","last_name":"Odziomek","first_name":"Mateusz"},{"last_name":"Giusto","first_name":"Paolo","full_name":"Giusto, Paolo"},{"full_name":"Kossmann, Janina","last_name":"Kossmann","first_name":"Janina"},{"first_name":"Nadezda V.","last_name":"Tarakina","full_name":"Tarakina, Nadezda V."},{"last_name":"Heske","first_name":"Julian Joachim","full_name":"Heske, Julian Joachim","id":"53238"},{"first_name":"Salvador M.","last_name":"Rivadeneira","full_name":"Rivadeneira, Salvador M."},{"first_name":"Waldemar","last_name":"Keil","full_name":"Keil, Waldemar"},{"full_name":"Schmidt, Claudia","orcid":"0000-0003-3179-9997","first_name":"Claudia","last_name":"Schmidt","id":"466"},{"full_name":"Mazzanti, Stefano","last_name":"Mazzanti","first_name":"Stefano"},{"full_name":"Savateev, Oleksandr","first_name":"Oleksandr","last_name":"Savateev"},{"full_name":"Perdigón‐Toro, Lorena","first_name":"Lorena","last_name":"Perdigón‐Toro"},{"last_name":"Neher","first_name":"Dieter","full_name":"Neher, Dieter"},{"first_name":"Thomas","last_name":"Kühne","full_name":"Kühne, Thomas","id":"49079"},{"full_name":"Antonietti, Markus","first_name":"Markus","last_name":"Antonietti"},{"first_name":"Nieves","last_name":"López‐Salas","full_name":"López‐Salas, Nieves"}],"title":"“Red Carbon”: A Rediscovered Covalent Crystalline Semiconductor","year":"2022","intvolume":" 34","publication_status":"published","date_updated":"2025-10-15T15:08:17Z","language":[{"iso":"eng"}],"article_number":"2206405","doi":"10.1002/adma.202206405"},{"doi":"10.1021/acs.nanolett.1c04610","language":[{"iso":"eng"}],"intvolume":" 22","date_updated":"2025-12-05T13:57:24Z","publication_status":"published","publication_identifier":{"issn":["1530-6984","1530-6992"]},"author":[{"full_name":"Murzakhanov, Fadis F.","first_name":"Fadis F.","last_name":"Murzakhanov"},{"first_name":"Georgy Vladimirovich","last_name":"Mamin","full_name":"Mamin, Georgy Vladimirovich"},{"last_name":"Orlinskii","first_name":"Sergei Borisovich","full_name":"Orlinskii, Sergei Borisovich"},{"full_name":"Gerstmann, Uwe","last_name":"Gerstmann","orcid":"0000-0002-4476-223X","first_name":"Uwe","id":"171"},{"last_name":"Schmidt","first_name":"Wolf Gero","orcid":"0000-0002-2717-5076","full_name":"Schmidt, Wolf Gero","id":"468"},{"full_name":"Biktagirov, Timur","first_name":"Timur","last_name":"Biktagirov","id":"65612"},{"full_name":"Aharonovich, Igor","first_name":"Igor","last_name":"Aharonovich"},{"last_name":"Gottscholl","first_name":"Andreas","full_name":"Gottscholl, Andreas"},{"last_name":"Sperlich","first_name":"Andreas","full_name":"Sperlich, Andreas"},{"first_name":"Vladimir","last_name":"Dyakonov","full_name":"Dyakonov, Vladimir"},{"full_name":"Soltamov, Victor A.","first_name":"Victor A.","last_name":"Soltamov"}],"title":"Electron–Nuclear Coherent Coupling and Nuclear Spin Readout through Optically Polarized VB– Spin States in hBN","year":"2022","department":[{"_id":"15"},{"_id":"170"},{"_id":"295"},{"_id":"230"},{"_id":"429"},{"_id":"35"},{"_id":"790"}],"type":"journal_article","keyword":["Mechanical Engineering","Condensed Matter Physics","General Materials Science","General Chemistry","Bioengineering"],"date_created":"2023-01-20T11:21:22Z","publication":"Nano Letters","issue":"7","volume":22,"user_id":"16199","_id":"37713","publisher":"American Chemical Society (ACS)","page":"2718-2724","status":"public","project":[{"_id":"53","name":"TRR 142: TRR 142"},{"name":"TRR 142 - A: TRR 142 - Project Area A","_id":"54"},{"_id":"55","name":"TRR 142 - B: TRR 142 - Project Area B"},{"name":"TRR 142 - A11: TRR 142 - Subproject A11","_id":"166"},{"_id":"168","name":"TRR 142 - B07: TRR 142 - Subproject B07"},{"name":"PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing","_id":"52"},{"_id":"53","name":"TRR 142: Maßgeschneiderte nichtlineare Photonik: Von grundlegenden Konzepten zu funktionellen Strukturen"}],"citation":{"mla":"Murzakhanov, Fadis F., et al. “Electron–Nuclear Coherent Coupling and Nuclear Spin Readout through Optically Polarized VB– Spin States in HBN.” Nano Letters, vol. 22, no. 7, American Chemical Society (ACS), 2022, pp. 2718–24, doi:10.1021/acs.nanolett.1c04610.","bibtex":"@article{Murzakhanov_Mamin_Orlinskii_Gerstmann_Schmidt_Biktagirov_Aharonovich_Gottscholl_Sperlich_Dyakonov_et al._2022, title={Electron–Nuclear Coherent Coupling and Nuclear Spin Readout through Optically Polarized VB– Spin States in hBN}, volume={22}, DOI={10.1021/acs.nanolett.1c04610}, number={7}, journal={Nano Letters}, publisher={American Chemical Society (ACS)}, author={Murzakhanov, Fadis F. and Mamin, Georgy Vladimirovich and Orlinskii, Sergei Borisovich and Gerstmann, Uwe and Schmidt, Wolf Gero and Biktagirov, Timur and Aharonovich, Igor and Gottscholl, Andreas and Sperlich, Andreas and Dyakonov, Vladimir and et al.}, year={2022}, pages={2718–2724} }","ama":"Murzakhanov FF, Mamin GV, Orlinskii SB, et al. Electron–Nuclear Coherent Coupling and Nuclear Spin Readout through Optically Polarized VB– Spin States in hBN. Nano Letters. 2022;22(7):2718-2724. doi:10.1021/acs.nanolett.1c04610","ieee":"F. F. Murzakhanov et al., “Electron–Nuclear Coherent Coupling and Nuclear Spin Readout through Optically Polarized VB– Spin States in hBN,” Nano Letters, vol. 22, no. 7, pp. 2718–2724, 2022, doi: 10.1021/acs.nanolett.1c04610.","apa":"Murzakhanov, F. F., Mamin, G. V., Orlinskii, S. B., Gerstmann, U., Schmidt, W. G., Biktagirov, T., Aharonovich, I., Gottscholl, A., Sperlich, A., Dyakonov, V., & Soltamov, V. A. (2022). Electron–Nuclear Coherent Coupling and Nuclear Spin Readout through Optically Polarized VB– Spin States in hBN. Nano Letters, 22(7), 2718–2724. https://doi.org/10.1021/acs.nanolett.1c04610","chicago":"Murzakhanov, Fadis F., Georgy Vladimirovich Mamin, Sergei Borisovich Orlinskii, Uwe Gerstmann, Wolf Gero Schmidt, Timur Biktagirov, Igor Aharonovich, et al. “Electron–Nuclear Coherent Coupling and Nuclear Spin Readout through Optically Polarized VB– Spin States in HBN.” Nano Letters 22, no. 7 (2022): 2718–24. https://doi.org/10.1021/acs.nanolett.1c04610.","short":"F.F. Murzakhanov, G.V. Mamin, S.B. Orlinskii, U. Gerstmann, W.G. Schmidt, T. Biktagirov, I. Aharonovich, A. Gottscholl, A. Sperlich, V. Dyakonov, V.A. Soltamov, Nano Letters 22 (2022) 2718–2724."}},{"user_id":"16199","volume":9,"_id":"33080","publisher":"Wiley","status":"public","project":[{"name":"TRR 142: TRR 142","_id":"53"},{"_id":"54","name":"TRR 142 - A: TRR 142 - Project Area A"},{"name":"TRR 142 - A4: TRR 142 - Subproject A4","_id":"61"},{"name":"TRR 142: Maßgeschneiderte nichtlineare Photonik: Von grundlegenden Konzepten zu funktionellen Strukturen","_id":"53"}],"citation":{"mla":"Long, Teng, et al. “Helical Polariton Lasing from Topological Valleys in an Organic Crystalline Microcavity.” Advanced Science, vol. 9, no. 29, 2203588, Wiley, 2022, doi:10.1002/advs.202203588.","bibtex":"@article{Long_Ma_Ren_Li_Liao_Schumacher_Malpuech_Solnyshkov_Fu_2022, title={Helical Polariton Lasing from Topological Valleys in an Organic Crystalline Microcavity}, volume={9}, DOI={10.1002/advs.202203588}, number={292203588}, journal={Advanced Science}, publisher={Wiley}, author={Long, Teng and Ma, Xuekai and Ren, Jiahuan and Li, Feng and Liao, Qing and Schumacher, Stefan and Malpuech, Guillaume and Solnyshkov, Dmitry and Fu, Hongbing}, year={2022} }","ama":"Long T, Ma X, Ren J, et al. Helical Polariton Lasing from Topological Valleys in an Organic Crystalline Microcavity. Advanced Science. 2022;9(29). doi:10.1002/advs.202203588","ieee":"T. Long et al., “Helical Polariton Lasing from Topological Valleys in an Organic Crystalline Microcavity,” Advanced Science, vol. 9, no. 29, Art. no. 2203588, 2022, doi: 10.1002/advs.202203588.","apa":"Long, T., Ma, X., Ren, J., Li, F., Liao, Q., Schumacher, S., Malpuech, G., Solnyshkov, D., & Fu, H. (2022). Helical Polariton Lasing from Topological Valleys in an Organic Crystalline Microcavity. Advanced Science, 9(29), Article 2203588. https://doi.org/10.1002/advs.202203588","short":"T. Long, X. Ma, J. Ren, F. Li, Q. Liao, S. Schumacher, G. Malpuech, D. Solnyshkov, H. Fu, Advanced Science 9 (2022).","chicago":"Long, Teng, Xuekai Ma, Jiahuan Ren, Feng Li, Qing Liao, Stefan Schumacher, Guillaume Malpuech, Dmitry Solnyshkov, and Hongbing Fu. “Helical Polariton Lasing from Topological Valleys in an Organic Crystalline Microcavity.” Advanced Science 9, no. 29 (2022). https://doi.org/10.1002/advs.202203588."},"doi":"10.1002/advs.202203588","article_number":"2203588","language":[{"iso":"eng"}],"publication_status":"published","date_updated":"2025-12-05T13:56:26Z","intvolume":" 9","year":"2022","title":"Helical Polariton Lasing from Topological Valleys in an Organic Crystalline Microcavity","author":[{"first_name":"Teng","last_name":"Long","full_name":"Long, Teng"},{"last_name":"Ma","first_name":"Xuekai","full_name":"Ma, Xuekai","id":"59416"},{"full_name":"Ren, Jiahuan","first_name":"Jiahuan","last_name":"Ren"},{"full_name":"Li, Feng","first_name":"Feng","last_name":"Li"},{"full_name":"Liao, Qing","first_name":"Qing","last_name":"Liao"},{"full_name":"Schumacher, Stefan","last_name":"Schumacher","first_name":"Stefan","orcid":"0000-0003-4042-4951","id":"27271"},{"full_name":"Malpuech, Guillaume","last_name":"Malpuech","first_name":"Guillaume"},{"last_name":"Solnyshkov","first_name":"Dmitry","full_name":"Solnyshkov, Dmitry"},{"first_name":"Hongbing","last_name":"Fu","full_name":"Fu, Hongbing"}],"publication_identifier":{"issn":["2198-3844","2198-3844"]},"keyword":["General Physics and Astronomy","General Engineering","Biochemistry","Genetics and Molecular Biology (miscellaneous)","General Materials Science","General Chemical Engineering","Medicine (miscellaneous)"],"type":"journal_article","department":[{"_id":"15"},{"_id":"170"},{"_id":"297"},{"_id":"705"},{"_id":"230"},{"_id":"429"},{"_id":"35"}],"date_created":"2022-08-22T19:05:04Z","publication":"Advanced Science","issue":"29"},{"status":"public","_id":"52612","publisher":"American Welding Society","page":"197-207","volume":101,"user_id":"60398","citation":{"ieee":"C. Böhne, G. Meschut, M. BIEGLER, and M. RETHMEIER, “The Influence of Electrode Indentation Rate on LME Formation during RSW,” Welding Journal, vol. 101, no. 7, pp. 197–207, 2022, doi: 10.29391/2022.101.015.","apa":"Böhne, C., Meschut, G., BIEGLER, M., & RETHMEIER, M. (2022). The Influence of Electrode Indentation Rate on LME Formation during RSW. Welding Journal, 101(7), 197–207. https://doi.org/10.29391/2022.101.015","short":"C. Böhne, G. Meschut, M. BIEGLER, M. RETHMEIER, Welding Journal 101 (2022) 197–207.","chicago":"Böhne, Christoph, Gerson Meschut, MAX BIEGLER, and MICHAEL RETHMEIER. “The Influence of Electrode Indentation Rate on LME Formation during RSW.” Welding Journal 101, no. 7 (2022): 197–207. https://doi.org/10.29391/2022.101.015.","mla":"Böhne, Christoph, et al. “The Influence of Electrode Indentation Rate on LME Formation during RSW.” Welding Journal, vol. 101, no. 7, American Welding Society, 2022, pp. 197–207, doi:10.29391/2022.101.015.","bibtex":"@article{Böhne_Meschut_BIEGLER_RETHMEIER_2022, title={The Influence of Electrode Indentation Rate on LME Formation during RSW}, volume={101}, DOI={10.29391/2022.101.015}, number={7}, journal={Welding Journal}, publisher={American Welding Society}, author={Böhne, Christoph and Meschut, Gerson and BIEGLER, MAX and RETHMEIER, MICHAEL}, year={2022}, pages={197–207} }","ama":"Böhne C, Meschut G, BIEGLER M, RETHMEIER M. The Influence of Electrode Indentation Rate on LME Formation during RSW. Welding Journal. 2022;101(7):197-207. doi:10.29391/2022.101.015"},"popular_science":"1","quality_controlled":"1","publication_identifier":{"issn":["0043-2296","2689-0445"]},"author":[{"last_name":"Böhne","first_name":"Christoph","full_name":"Böhne, Christoph","id":"22483"},{"full_name":"Meschut, Gerson","last_name":"Meschut","orcid":"0000-0002-2763-1246","first_name":"Gerson","id":"32056"},{"full_name":"BIEGLER, MAX","last_name":"BIEGLER","first_name":"MAX"},{"last_name":"RETHMEIER","first_name":"MICHAEL","full_name":"RETHMEIER, MICHAEL"}],"year":"2022","title":"The Influence of Electrode Indentation Rate on LME Formation during RSW","intvolume":" 101","publication_status":"published","date_updated":"2025-08-07T09:29:30Z","language":[{"iso":"eng"}],"doi":"10.29391/2022.101.015","publication":"Welding Journal","issue":"7","abstract":[{"text":"During resistance spot welding of zinc-coated advanced high-strength steels (AHSSs) for automotive production, liquid metal embrittlement (LME) cracking may occur in the event of a combination of various unfavorable influences. In this study, the interactions of different welding current levels and weld times on the tendency for LME cracking in third-generation AHSSs were investigated. LME manifested itself as high-penetration cracks around the circumference of the spot welds for welding currents closely below the expulsion limit. At the same time, the observed tendency for LME cracking showed no direct correlation with the overall heat input of the investigated welding processes. To identify a reliable indicator of the tendency for LME cracking, the local strain rate at the origin of the observed cracks was analyzed over the course of the welding process via finite element simulation. While the local strain rate showed a good correlation with the process-specific LME cracking tendency, it was difficult to interpret due to its discontinuous course. Therefore, based on the experimental measurement of electrode displacement during welding, electrode indentation velocity was proposed as a descriptive indicator for quantifying cracking tendency.","lang":"eng"}],"date_created":"2024-03-18T11:51:57Z","department":[{"_id":"157"}],"keyword":["Metals and Alloys","Mechanical Engineering","Mechanics of Materials"],"type":"journal_article"},{"date_created":"2023-01-12T09:33:55Z","type":"journal_article","keyword":["Condensed Matter Physics","General Materials Science"],"department":[{"_id":"158"},{"_id":"157"},{"_id":"321"}],"publication":"Advanced Engineering Materials","issue":"10","abstract":[{"lang":"eng","text":"AlSi casting alloys combine excellent castability with high strength. Hence, this group of alloys is often used in the automotive sector. The challenge for this application is the brittle character of these alloys which leads to cracks during joint formation when mechanical joining technologies are used. A rise in ductility can be achieved by a considerable increase in the solidification rate which results in grain refinement. High solidification rates can be realized in twin–roll casting (TRC) by water-cooled rolls. Therefore, a hypoeutectic EN AC–AlSi9 (for European Norm - aluminum cast product) is manufactured by the TRC process and analyzed. Subsequently, joining investigations are performed on castings in as-cast and heat-treated condition using the self-piercing riveting process considering the joint formation and the load-bearing capacity. Due to the fine microstructure, the crack initiation can be avoided during joining, while maintaining the joining parameters, especially by specimens in heat treatment conditions. Furthermore, due to the extremely fine microstructure, the load-bearing capacity of the joint can be significantly increased in terms of the maximum load-bearing force and the energy absorbed."}],"article_number":"2200874","main_file_link":[{"open_access":"1","url":"https://onlinelibrary.wiley.com/doi/full/10.1002/adem.202200874"}],"language":[{"iso":"eng"}],"doi":"10.1002/adem.202200874","title":"Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting","year":"2022","author":[{"full_name":"Neuser, Moritz","last_name":"Neuser","first_name":"Moritz","id":"32340"},{"id":"66459","last_name":"Kappe","first_name":"Fabian","full_name":"Kappe, Fabian"},{"full_name":"Ostermeier, Jakob","first_name":"Jakob","last_name":"Ostermeier"},{"full_name":"Krüger, Jan Tobias","first_name":"Jan Tobias","orcid":"0000-0002-0827-9654","last_name":"Krüger","id":"44307"},{"id":"7850","first_name":"Mathias","last_name":"Bobbert","full_name":"Bobbert, Mathias"},{"full_name":"Meschut, Gerson","last_name":"Meschut","orcid":"0000-0002-2763-1246","first_name":"Gerson","id":"32056"},{"id":"43720","first_name":"Mirko","last_name":"Schaper","full_name":"Schaper, Mirko"},{"id":"43822","full_name":"Grydin, Olexandr","first_name":"Olexandr","last_name":"Grydin"}],"publication_identifier":{"issn":["1438-1656","1527-2648"]},"publication_status":"published","date_updated":"2026-05-12T12:15:46Z","article_type":"original","intvolume":" 24","oa":"1","citation":{"mla":"Neuser, Moritz, et al. “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting.” Advanced Engineering Materials, vol. 24, no. 10, 2200874, Wiley, 2022, doi:10.1002/adem.202200874.","ama":"Neuser M, Kappe F, Ostermeier J, et al. Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting. Advanced Engineering Materials. 2022;24(10). doi:10.1002/adem.202200874","bibtex":"@article{Neuser_Kappe_Ostermeier_Krüger_Bobbert_Meschut_Schaper_Grydin_2022, title={Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting}, volume={24}, DOI={10.1002/adem.202200874}, number={102200874}, journal={Advanced Engineering Materials}, publisher={Wiley}, author={Neuser, Moritz and Kappe, Fabian and Ostermeier, Jakob and Krüger, Jan Tobias and Bobbert, Mathias and Meschut, Gerson and Schaper, Mirko and Grydin, Olexandr}, year={2022} }","apa":"Neuser, M., Kappe, F., Ostermeier, J., Krüger, J. T., Bobbert, M., Meschut, G., Schaper, M., & Grydin, O. (2022). Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting. Advanced Engineering Materials, 24(10), Article 2200874. https://doi.org/10.1002/adem.202200874","ieee":"M. Neuser et al., “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting,” Advanced Engineering Materials, vol. 24, no. 10, Art. no. 2200874, 2022, doi: 10.1002/adem.202200874.","chicago":"Neuser, Moritz, Fabian Kappe, Jakob Ostermeier, Jan Tobias Krüger, Mathias Bobbert, Gerson Meschut, Mirko Schaper, and Olexandr Grydin. “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting.” Advanced Engineering Materials 24, no. 10 (2022). https://doi.org/10.1002/adem.202200874.","short":"M. Neuser, F. Kappe, J. Ostermeier, J.T. Krüger, M. Bobbert, G. Meschut, M. Schaper, O. Grydin, Advanced Engineering Materials 24 (2022)."},"quality_controlled":"1","project":[{"_id":"136","name":"TRR 285 – A02: TRR 285 - Subproject A02"},{"_id":"131","name":"TRR 285 - A: TRR 285 - Project Area A"},{"name":"TRR 285 - C: TRR 285 - Project Area C","_id":"133"},{"name":"TRR 285 – C02: TRR 285 - Subproject C02","_id":"146"},{"_id":"130","name":"TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten"}],"publisher":"Wiley","_id":"36332","user_id":"7850","volume":24,"status":"public"},{"quality_controlled":"1","project":[{"name":"TRR 285 – C03: TRR 285 - Subproject C03","_id":"147"},{"name":"TRR 285 - Project Area C","_id":"133"},{"name":"TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten","_id":"130"}],"citation":{"mla":"Wischer, Christian, and Werner Homberg. “Further Development of an Adaptive Joining Technique Based on Friction Spinning to Produce Pre-Hole-Free Joints.” Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1468–78, doi:10.4028/p-1n6741.","ama":"Wischer C, Homberg W. Further Development of an Adaptive Joining Technique Based on Friction Spinning to Produce Pre-Hole-Free Joints. Key Engineering Materials. 2022;926:1468-1478. doi:10.4028/p-1n6741","bibtex":"@article{Wischer_Homberg_2022, title={Further Development of an Adaptive Joining Technique Based on Friction Spinning to Produce Pre-Hole-Free Joints}, volume={926}, DOI={10.4028/p-1n6741}, journal={Key Engineering Materials}, publisher={Trans Tech Publications, Ltd.}, author={Wischer, Christian and Homberg, Werner}, year={2022}, pages={1468–1478} }","apa":"Wischer, C., & Homberg, W. (2022). Further Development of an Adaptive Joining Technique Based on Friction Spinning to Produce Pre-Hole-Free Joints. Key Engineering Materials, 926, 1468–1478. https://doi.org/10.4028/p-1n6741","ieee":"C. Wischer and W. Homberg, “Further Development of an Adaptive Joining Technique Based on Friction Spinning to Produce Pre-Hole-Free Joints,” Key Engineering Materials, vol. 926, pp. 1468–1478, 2022, doi: 10.4028/p-1n6741.","chicago":"Wischer, Christian, and Werner Homberg. “Further Development of an Adaptive Joining Technique Based on Friction Spinning to Produce Pre-Hole-Free Joints.” Key Engineering Materials 926 (2022): 1468–78. https://doi.org/10.4028/p-1n6741.","short":"C. Wischer, W. Homberg, Key Engineering Materials 926 (2022) 1468–1478."},"user_id":"7850","volume":926,"page":"1468-1478","_id":"37647","publisher":"Trans Tech Publications, Ltd.","status":"public","type":"journal_article","keyword":["Mechanical Engineering","Mechanics of Materials","General Materials Science"],"department":[{"_id":"156"}],"date_created":"2023-01-20T07:47:18Z","abstract":[{"lang":"eng","text":"Mechanical joining processes are an essential part of modern lightweight construction. They permit materials of different types to be joined in a way that is suitable for the loads involved. These processes reach their limits, however, as soon as the boundary conditions change. In most cases, these elements are specially adapted to the joining point and cannot be used universally. Changes require cost-intensive adaptation of both the element and the process control, thus making production more complex. This results in high costs due to the increased number of auxiliary joining element variants required and reduces the economic efficiency of mechanical joining. One approach to overcoming this issue is the use of adaptive auxiliary joining elements formed by friction spinning. This article presents the current state of research on pre-hole-free joining with adaptive joining elements. The overall process chain is illustrated, explained and analyzed. Special attention is paid to demonstrating the feasibility of pre-hole-free joining with adaptive joining elements. The chosen mechanical parameters are subsequently listed. Finally, a comprehensive outlook of the future development potential is derived."}],"publication":"Key Engineering Materials","doi":"10.4028/p-1n6741","language":[{"iso":"eng"}],"publication_status":"published","date_updated":"2026-05-12T12:00:20Z","article_type":"original","intvolume":" 926","title":"Further Development of an Adaptive Joining Technique Based on Friction Spinning to Produce Pre-Hole-Free Joints","year":"2022","publication_identifier":{"issn":["1662-9795"]},"author":[{"first_name":"Christian","last_name":"Wischer","full_name":"Wischer, Christian"},{"last_name":"Homberg","first_name":"Werner","full_name":"Homberg, Werner"}]},{"date_created":"2022-11-14T08:53:49Z","department":[{"_id":"143"},{"_id":"157"}],"type":"journal_article","keyword":["Mechanical Engineering","Mechanics of Materials","Engineering (miscellaneous)","Chemical Engineering (miscellaneous)"],"publication":"Journal of Advanced Joining Processes","language":[{"iso":"eng"}],"article_number":"100133","doi":"10.1016/j.jajp.2022.100133","author":[{"id":"4668","last_name":"Schramm","first_name":"Britta","full_name":"Schramm, Britta"},{"id":"38177","full_name":"Martin, Sven","last_name":"Martin","first_name":"Sven"},{"full_name":"Steinfelder, Christian","first_name":"Christian","last_name":"Steinfelder"},{"id":"34782","full_name":"Bielak, Christian Roman","last_name":"Bielak","first_name":"Christian Roman"},{"full_name":"Brosius, Alexander","first_name":"Alexander","last_name":"Brosius"},{"full_name":"Meschut, Gerson","first_name":"Gerson","orcid":"0000-0002-2763-1246","last_name":"Meschut","id":"32056"},{"id":"553","full_name":"Tröster, Thomas","first_name":"Thomas","last_name":"Tröster"},{"first_name":"Thomas","last_name":"Wallmersperger","full_name":"Wallmersperger, Thomas"},{"full_name":"Mergheim, Julia","first_name":"Julia","last_name":"Mergheim"}],"publication_identifier":{"issn":["2666-3309"]},"title":"A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase","year":"2022","intvolume":" 6","date_updated":"2026-05-12T12:59:39Z","publication_status":"published","citation":{"ama":"Schramm B, Martin S, Steinfelder C, et al. A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase. Journal of Advanced Joining Processes. 2022;6. doi:10.1016/j.jajp.2022.100133","bibtex":"@article{Schramm_Martin_Steinfelder_Bielak_Brosius_Meschut_Tröster_Wallmersperger_Mergheim_2022, title={A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase}, volume={6}, DOI={10.1016/j.jajp.2022.100133}, number={100133}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Schramm, Britta and Martin, Sven and Steinfelder, Christian and Bielak, Christian Roman and Brosius, Alexander and Meschut, Gerson and Tröster, Thomas and Wallmersperger, Thomas and Mergheim, Julia}, year={2022} }","mla":"Schramm, Britta, et al. “A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase.” Journal of Advanced Joining Processes, vol. 6, 100133, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100133.","short":"B. Schramm, S. Martin, C. Steinfelder, C.R. Bielak, A. Brosius, G. Meschut, T. Tröster, T. Wallmersperger, J. Mergheim, Journal of Advanced Joining Processes 6 (2022).","chicago":"Schramm, Britta, Sven Martin, Christian Steinfelder, Christian Roman Bielak, Alexander Brosius, Gerson Meschut, Thomas Tröster, Thomas Wallmersperger, and Julia Mergheim. “A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase.” Journal of Advanced Joining Processes 6 (2022). https://doi.org/10.1016/j.jajp.2022.100133.","apa":"Schramm, B., Martin, S., Steinfelder, C., Bielak, C. R., Brosius, A., Meschut, G., Tröster, T., Wallmersperger, T., & Mergheim, J. (2022). A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase. Journal of Advanced Joining Processes, 6, Article 100133. https://doi.org/10.1016/j.jajp.2022.100133","ieee":"B. Schramm et al., “A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase,” Journal of Advanced Joining Processes, vol. 6, Art. no. 100133, 2022, doi: 10.1016/j.jajp.2022.100133."},"project":[{"_id":"130","name":"TRR 285: TRR 285"},{"_id":"143","name":"TRR 285 – B04: TRR 285 - Subproject B04"},{"_id":"140","name":"TRR 285 – B01: TRR 285 - Subproject B01"},{"_id":"135","name":"TRR 285 – A01: TRR 285 - Subproject A01"},{"_id":"142","name":"TRR 285 – B03: TRR 285 - Subproject B03"},{"_id":"139","name":"TRR 285 – A05: TRR 285 - Subproject A05"},{"name":"TRR 285 - Project Area B","_id":"132"},{"_id":"131","name":"TRR 285 - Project Area A"}],"quality_controlled":"1","publisher":"Elsevier BV","_id":"34069","volume":6,"user_id":"7850","status":"public"},{"quality_controlled":"1","project":[{"_id":"130","name":"TRR 285: TRR 285"},{"_id":"143","name":"TRR 285 – B04: TRR 285 - Subproject B04"},{"_id":"139","name":"TRR 285 – A05: TRR 285 - Subproject A05"},{"_id":"137","name":"TRR 285 – A03: TRR 285 - Subproject A03"},{"name":"TRR 285 – A01: TRR 285 - Subproject A01","_id":"135"},{"name":"TRR 285 – B03: TRR 285 - Subproject B03","_id":"142"},{"_id":"131","name":"TRR 285 - Project Area A"},{"_id":"132","name":"TRR 285 - Project Area B"}],"citation":{"mla":"Schramm, Britta, et al. “A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process.” Journal of Advanced Joining Processes, 100134, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100134.","bibtex":"@article{Schramm_Friedlein_Gröger_Bielak_Bobbert_Gude_Meschut_Wallmersperger_Mergheim_2022, title={A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process}, DOI={10.1016/j.jajp.2022.100134}, number={100134}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Schramm, Britta and Friedlein, Johannes and Gröger, Benjamin and Bielak, Christian Roman and Bobbert, Mathias and Gude, Maik and Meschut, Gerson and Wallmersperger, Thomas and Mergheim, Julia}, year={2022} }","ama":"Schramm B, Friedlein J, Gröger B, et al. A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process. Journal of Advanced Joining Processes. Published online 2022. doi:10.1016/j.jajp.2022.100134","ieee":"B. Schramm et al., “A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process,” Journal of Advanced Joining Processes, Art. no. 100134, 2022, doi: 10.1016/j.jajp.2022.100134.","apa":"Schramm, B., Friedlein, J., Gröger, B., Bielak, C. R., Bobbert, M., Gude, M., Meschut, G., Wallmersperger, T., & Mergheim, J. (2022). A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process. Journal of Advanced Joining Processes, Article 100134. https://doi.org/10.1016/j.jajp.2022.100134","chicago":"Schramm, Britta, Johannes Friedlein, Benjamin Gröger, Christian Roman Bielak, Mathias Bobbert, Maik Gude, Gerson Meschut, Thomas Wallmersperger, and Julia Mergheim. “A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process.” Journal of Advanced Joining Processes, 2022. https://doi.org/10.1016/j.jajp.2022.100134.","short":"B. Schramm, J. Friedlein, B. Gröger, C.R. Bielak, M. Bobbert, M. Gude, G. Meschut, T. Wallmersperger, J. Mergheim, Journal of Advanced Joining Processes (2022)."},"status":"public","user_id":"7850","_id":"34068","publisher":"Elsevier BV","publication":"Journal of Advanced Joining Processes","keyword":["Mechanical Engineering","Mechanics of Materials","Engineering (miscellaneous)","Chemical Engineering (miscellaneous)"],"type":"journal_article","department":[{"_id":"143"},{"_id":"157"}],"date_created":"2022-11-14T08:53:07Z","date_updated":"2026-05-12T12:58:23Z","publication_status":"published","year":"2022","title":"A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process","author":[{"id":"4668","first_name":"Britta","last_name":"Schramm","full_name":"Schramm, Britta"},{"last_name":"Friedlein","first_name":"Johannes","full_name":"Friedlein, Johannes"},{"last_name":"Gröger","first_name":"Benjamin","full_name":"Gröger, Benjamin"},{"id":"34782","full_name":"Bielak, Christian Roman","first_name":"Christian Roman","last_name":"Bielak"},{"first_name":"Mathias","last_name":"Bobbert","full_name":"Bobbert, Mathias","id":"7850"},{"first_name":"Maik","last_name":"Gude","full_name":"Gude, Maik"},{"last_name":"Meschut","orcid":"0000-0002-2763-1246","first_name":"Gerson","full_name":"Meschut, Gerson","id":"32056"},{"last_name":"Wallmersperger","first_name":"Thomas","full_name":"Wallmersperger, Thomas"},{"full_name":"Mergheim, Julia","last_name":"Mergheim","first_name":"Julia"}],"publication_identifier":{"issn":["2666-3309"]},"doi":"10.1016/j.jajp.2022.100134","article_number":"100134","language":[{"iso":"eng"}]},{"doi":"10.1016/j.jajp.2022.100135","article_number":"100135","language":[{"iso":"eng"}],"date_updated":"2026-05-12T12:52:34Z","publication_status":"published","title":"A Review on the Modeling of the Clinching Process Chain - Part III: Operational Phase","year":"2022","author":[{"full_name":"Schramm, Britta","first_name":"Britta","last_name":"Schramm","id":"4668"},{"full_name":"Harzheim, Sven","first_name":"Sven","last_name":"Harzheim"},{"full_name":"Weiß, Deborah","last_name":"Weiß","first_name":"Deborah","id":"45673"},{"id":"30821","full_name":"Joy, Tintu David","first_name":"Tintu David","last_name":"Joy"},{"last_name":"Hofmann","first_name":"Martin","full_name":"Hofmann, Martin"},{"first_name":"Julia","last_name":"Mergheim","full_name":"Mergheim, Julia"},{"full_name":"Wallmersperger, Thomas","first_name":"Thomas","last_name":"Wallmersperger"}],"publication_identifier":{"issn":["2666-3309"]},"keyword":["Mechanical Engineering","Mechanics of Materials","Engineering (miscellaneous)","Chemical Engineering (miscellaneous)"],"type":"journal_article","department":[{"_id":"143"}],"date_created":"2022-11-14T08:55:34Z","publication":"Journal of Advanced Joining Processes","user_id":"7850","_id":"34070","publisher":"Elsevier BV","status":"public","quality_controlled":"1","project":[{"_id":"130","name":"TRR 285: TRR 285"},{"name":"TRR 285 – B04: TRR 285 - Subproject B04","_id":"143"},{"name":"TRR 285 – B03: TRR 285 - Subproject B03","_id":"142"},{"name":"TRR 285 – A05: TRR 285 - Subproject A05","_id":"139"},{"name":"TRR 285 - Project Area B","_id":"132"},{"name":"TRR 285 - Project Area A","_id":"131"}],"citation":{"ama":"Schramm B, Harzheim S, Weiß D, et al. A Review on the Modeling of the Clinching Process Chain - Part III: Operational Phase. Journal of Advanced Joining Processes. Published online 2022. doi:10.1016/j.jajp.2022.100135","bibtex":"@article{Schramm_Harzheim_Weiß_Joy_Hofmann_Mergheim_Wallmersperger_2022, title={A Review on the Modeling of the Clinching Process Chain - Part III: Operational Phase}, DOI={10.1016/j.jajp.2022.100135}, number={100135}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Schramm, Britta and Harzheim, Sven and Weiß, Deborah and Joy, Tintu David and Hofmann, Martin and Mergheim, Julia and Wallmersperger, Thomas}, year={2022} }","mla":"Schramm, Britta, et al. “A Review on the Modeling of the Clinching Process Chain - Part III: Operational Phase.” Journal of Advanced Joining Processes, 100135, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100135.","chicago":"Schramm, Britta, Sven Harzheim, Deborah Weiß, Tintu David Joy, Martin Hofmann, Julia Mergheim, and Thomas Wallmersperger. “A Review on the Modeling of the Clinching Process Chain - Part III: Operational Phase.” Journal of Advanced Joining Processes, 2022. https://doi.org/10.1016/j.jajp.2022.100135.","short":"B. Schramm, S. Harzheim, D. Weiß, T.D. Joy, M. Hofmann, J. Mergheim, T. Wallmersperger, Journal of Advanced Joining Processes (2022).","apa":"Schramm, B., Harzheim, S., Weiß, D., Joy, T. D., Hofmann, M., Mergheim, J., & Wallmersperger, T. (2022). A Review on the Modeling of the Clinching Process Chain - Part III: Operational Phase. Journal of Advanced Joining Processes, Article 100135. https://doi.org/10.1016/j.jajp.2022.100135","ieee":"B. Schramm et al., “A Review on the Modeling of the Clinching Process Chain - Part III: Operational Phase,” Journal of Advanced Joining Processes, Art. no. 100135, 2022, doi: 10.1016/j.jajp.2022.100135."}},{"user_id":"7850","_id":"31238","publisher":"Elsevier BV","status":"public","quality_controlled":"1","project":[{"name":"TRR 285 - A: TRR 285 - Project Area A","_id":"131"},{"name":"TRR 285 – A02: TRR 285 - Subproject A02","_id":"136"},{"_id":"130","name":"TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten"}],"citation":{"ieee":"R. Kupfer et al., “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties,” Journal of Advanced Joining Processes, Art. no. 100108, 2022, doi: 10.1016/j.jajp.2022.100108.","apa":"Kupfer, R., Köhler, D., Römisch, D., Wituschek, S., Ewenz, L., Kalich, J., Weiß, D., Sadeghian, B., Busch, M., Krüger, J. T., Neuser, M., Grydin, O., Böhnke, M., Bielak, C.-R., & Troschitz, J. (2022). Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties. Journal of Advanced Joining Processes, Article 100108. https://doi.org/10.1016/j.jajp.2022.100108","chicago":"Kupfer, Robert, Daniel Köhler, David Römisch, Simon Wituschek, Lars Ewenz, Jan Kalich, Deborah Weiß, et al. “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties.” Journal of Advanced Joining Processes, 2022. https://doi.org/10.1016/j.jajp.2022.100108.","short":"R. Kupfer, D. Köhler, D. Römisch, S. Wituschek, L. Ewenz, J. Kalich, D. Weiß, B. Sadeghian, M. Busch, J.T. Krüger, M. Neuser, O. Grydin, M. Böhnke, C.-R. Bielak, J. Troschitz, Journal of Advanced Joining Processes (2022).","mla":"Kupfer, Robert, et al. “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties.” Journal of Advanced Joining Processes, 100108, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100108.","bibtex":"@article{Kupfer_Köhler_Römisch_Wituschek_Ewenz_Kalich_Weiß_Sadeghian_Busch_Krüger_et al._2022, title={Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties}, DOI={10.1016/j.jajp.2022.100108}, number={100108}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Kupfer, Robert and Köhler, Daniel and Römisch, David and Wituschek, Simon and Ewenz, Lars and Kalich, Jan and Weiß, Deborah and Sadeghian, Behdad and Busch, Matthias and Krüger, Jan Tobias and et al.}, year={2022} }","ama":"Kupfer R, Köhler D, Römisch D, et al. Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties. Journal of Advanced Joining Processes. Published online 2022. doi:10.1016/j.jajp.2022.100108"},"doi":"10.1016/j.jajp.2022.100108","article_number":"100108","language":[{"iso":"eng"}],"publication_status":"published","date_updated":"2026-05-12T13:49:43Z","title":"Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties","year":"2022","publication_identifier":{"issn":["2666-3309"]},"author":[{"first_name":"Robert","last_name":"Kupfer","full_name":"Kupfer, Robert"},{"last_name":"Köhler","first_name":"Daniel","full_name":"Köhler, Daniel"},{"full_name":"Römisch, David","first_name":"David","last_name":"Römisch"},{"full_name":"Wituschek, Simon","first_name":"Simon","last_name":"Wituschek"},{"full_name":"Ewenz, Lars","last_name":"Ewenz","first_name":"Lars"},{"full_name":"Kalich, Jan","first_name":"Jan","last_name":"Kalich"},{"id":"45673","full_name":"Weiß, Deborah","last_name":"Weiß","first_name":"Deborah"},{"full_name":"Sadeghian, Behdad","first_name":"Behdad","last_name":"Sadeghian"},{"last_name":"Busch","first_name":"Matthias","full_name":"Busch, Matthias"},{"id":"44307","full_name":"Krüger, Jan Tobias","orcid":"0000-0002-0827-9654","last_name":"Krüger","first_name":"Jan Tobias"},{"full_name":"Neuser, Moritz","last_name":"Neuser","first_name":"Moritz","id":"32340"},{"first_name":"Olexandr","last_name":"Grydin","full_name":"Grydin, Olexandr","id":"43822"},{"full_name":"Böhnke, Max","first_name":"Max","last_name":"Böhnke","id":"45779"},{"last_name":"Bielak","first_name":"Christian-Roman","full_name":"Bielak, Christian-Roman"},{"full_name":"Troschitz, Juliane","last_name":"Troschitz","first_name":"Juliane"}],"type":"journal_article","keyword":["Mechanical Engineering","Mechanics of Materials","Engineering (miscellaneous)","Chemical Engineering (miscellaneous)"],"department":[{"_id":"158"}],"date_created":"2022-05-12T13:48:16Z","publication":"Journal of Advanced Joining Processes"},{"abstract":[{"lang":"eng","text":"Abstract Developing resource-abundant and sustainable metal-free bifunctional oxygen electrocatalysts is essential for the practical application of zinc–air batteries (ZABs). 2D black phosphorus (BP) with fully exposed atoms and active lone pair electrons can be promising for oxygen electrocatalysts, which, however, suffers from low catalytic activity and poor electrochemical stability. Herein, guided by density functional theory (DFT) calculations, an efficient metal-free electrocatalyst is demonstrated via covalently bonding BP nanosheets with graphitic carbon nitride (denoted BP-CN-c). The polarized PN covalent bonds in BP-CN-c can efficiently regulate the electron transfer from BP to graphitic carbon nitride and significantly promote the OOH* adsorption on phosphorus atoms. Impressively, the oxygen evolution reaction performance of BP-CN-c (overpotential of 350 mV at 10 mA cm−2, 90\\% retention after 10 h operation) represents the state-of-the-art among the reported BP-based metal-free catalysts. Additionally, BP-CN-c exhibits a small half-wave overpotential of 390 mV for oxygen reduction reaction, representing the first bifunctional BP-based metal-free oxygen catalyst. Moreover, ZABs are assembled incorporating BP-CN-c cathodes, delivering a substantially higher peak power density (168.3 mW cm−2) than the Pt/C+RuO2-based ZABs (101.3 mW cm−2). The acquired insights into interfacial covalent bonds pave the way for the rational design of new and affordable metal-free catalysts."}],"publication":"Advanced Materials","issue":"20","keyword":["2D materials","bifunctional oxygen electrocatalysts","black phosphorus","oxygen evolution reaction","zinc–air batteries"],"type":"journal_article","department":[{"_id":"304"}],"date_created":"2021-05-21T12:38:41Z","date_updated":"2022-07-21T09:25:33Z","intvolume":" 33","year":"2021","title":"Interfacial Covalent Bonds Regulated Electron-Deficient 2D Black Phosphorus for Electrocatalytic Oxygen Reactions","author":[{"full_name":"Wang, Xia","last_name":"Wang","first_name":"Xia"},{"id":"71692","last_name":"Kormath Madam Raghupathy","first_name":"Ramya","orcid":"https://orcid.org/0000-0003-4667-9744","full_name":"Kormath Madam Raghupathy, Ramya"},{"first_name":"Christine Joy","last_name":"Querebillo","full_name":"Querebillo, Christine Joy"},{"first_name":"Zhongquan","last_name":"Liao","full_name":"Liao, Zhongquan"},{"first_name":"Dongqi","last_name":"Li","full_name":"Li, Dongqi"},{"full_name":"Lin, Kui","first_name":"Kui","last_name":"Lin"},{"full_name":"Hantusch, Martin","last_name":"Hantusch","first_name":"Martin"},{"first_name":"Zdeněk","last_name":"Sofer","full_name":"Sofer, Zdeněk"},{"full_name":"Li, Baohua","first_name":"Baohua","last_name":"Li"},{"full_name":"Zschech, Ehrenfried","last_name":"Zschech","first_name":"Ehrenfried"},{"full_name":"Weidinger, Inez M.","last_name":"Weidinger","first_name":"Inez M."},{"id":"49079","first_name":"Thomas","last_name":"Kühne","full_name":"Kühne, Thomas"},{"full_name":"Mirhosseini, Hossein","last_name":"Mirhosseini","first_name":"Hossein","orcid":"0000-0001-6179-1545","id":"71051"},{"full_name":"Yu, Minghao","last_name":"Yu","first_name":"Minghao"},{"last_name":"Feng","first_name":"Xinliang","full_name":"Feng, Xinliang"}],"doi":"https://doi.org/10.1002/adma.202008752","language":[{"iso":"eng"}],"project":[{"name":"Computing Resources Provided by the Paderborn Center for Parallel Computing","_id":"52"}],"citation":{"apa":"Wang, X., Kormath Madam Raghupathy, R., Querebillo, C. J., Liao, Z., Li, D., Lin, K., Hantusch, M., Sofer, Z., Li, B., Zschech, E., Weidinger, I. M., Kühne, T., Mirhosseini, H., Yu, M., & Feng, X. (2021). Interfacial Covalent Bonds Regulated Electron-Deficient 2D Black Phosphorus for Electrocatalytic Oxygen Reactions. Advanced Materials, 33(20), 2008752. https://doi.org/10.1002/adma.202008752","mla":"Wang, Xia, et al. “Interfacial Covalent Bonds Regulated Electron-Deficient 2D Black Phosphorus for Electrocatalytic Oxygen Reactions.” Advanced Materials, vol. 33, no. 20, 2021, p. 2008752, doi:https://doi.org/10.1002/adma.202008752.","ieee":"X. Wang et al., “Interfacial Covalent Bonds Regulated Electron-Deficient 2D Black Phosphorus for Electrocatalytic Oxygen Reactions,” Advanced Materials, vol. 33, no. 20, p. 2008752, 2021, doi: https://doi.org/10.1002/adma.202008752.","ama":"Wang X, Kormath Madam Raghupathy R, Querebillo CJ, et al. Interfacial Covalent Bonds Regulated Electron-Deficient 2D Black Phosphorus for Electrocatalytic Oxygen Reactions. Advanced Materials. 2021;33(20):2008752. doi:https://doi.org/10.1002/adma.202008752","short":"X. Wang, R. Kormath Madam Raghupathy, C.J. Querebillo, Z. Liao, D. Li, K. Lin, M. Hantusch, Z. Sofer, B. Li, E. Zschech, I.M. Weidinger, T. Kühne, H. Mirhosseini, M. Yu, X. Feng, Advanced Materials 33 (2021) 2008752.","chicago":"Wang, Xia, Ramya Kormath Madam Raghupathy, Christine Joy Querebillo, Zhongquan Liao, Dongqi Li, Kui Lin, Martin Hantusch, et al. “Interfacial Covalent Bonds Regulated Electron-Deficient 2D Black Phosphorus for Electrocatalytic Oxygen Reactions.” Advanced Materials 33, no. 20 (2021): 2008752. https://doi.org/10.1002/adma.202008752.","bibtex":"@article{Wang_Kormath Madam Raghupathy_Querebillo_Liao_Li_Lin_Hantusch_Sofer_Li_Zschech_et al._2021, title={Interfacial Covalent Bonds Regulated Electron-Deficient 2D Black Phosphorus for Electrocatalytic Oxygen Reactions}, volume={33}, DOI={https://doi.org/10.1002/adma.202008752}, number={20}, journal={Advanced Materials}, author={Wang, Xia and Kormath Madam Raghupathy, Ramya and Querebillo, Christine Joy and Liao, Zhongquan and Li, Dongqi and Lin, Kui and Hantusch, Martin and Sofer, Zdeněk and Li, Baohua and Zschech, Ehrenfried and et al.}, year={2021}, pages={2008752} }"},"status":"public","user_id":"71051","volume":33,"page":"2008752","_id":"22220"},{"date_created":"2022-05-03T06:52:26Z","department":[{"_id":"163"}],"type":"journal_article","keyword":["Materials Chemistry","Colloid and Surface Chemistry","Polymers and Plastics","Physical and Theoretical Chemistry"],"publication":"Colloid and Polymer Science","issue":"10","language":[{"iso":"eng"}],"doi":"10.1007/s00396-021-04882-x","author":[{"first_name":"Momen S. A.","last_name":"Abdelaty","full_name":"Abdelaty, Momen S. A."},{"full_name":"Kuckling, Dirk","first_name":"Dirk","last_name":"Kuckling","id":"287"}],"publication_identifier":{"issn":["0303-402X","1435-1536"]},"title":"Altering of lower critical solution temperature of environmentally responsive poly (N-isopropylacrylamide-co-acrylic acid-co-vanillin acrylate) affected by acrylic acid, vanillin acrylate, and post-polymerization modification","year":"2021","intvolume":" 299","date_updated":"2022-07-28T10:03:21Z","publication_status":"published","citation":{"short":"M.S.A. Abdelaty, D. Kuckling, Colloid and Polymer Science 299 (2021) 1617–1629.","chicago":"Abdelaty, Momen S. A., and Dirk Kuckling. “Altering of Lower Critical Solution Temperature of Environmentally Responsive Poly (N-Isopropylacrylamide-Co-Acrylic Acid-Co-Vanillin Acrylate) Affected by Acrylic Acid, Vanillin Acrylate, and Post-Polymerization Modification.” Colloid and Polymer Science 299, no. 10 (2021): 1617–29. https://doi.org/10.1007/s00396-021-04882-x.","ieee":"M. S. A. Abdelaty and D. Kuckling, “Altering of lower critical solution temperature of environmentally responsive poly (N-isopropylacrylamide-co-acrylic acid-co-vanillin acrylate) affected by acrylic acid, vanillin acrylate, and post-polymerization modification,” Colloid and Polymer Science, vol. 299, no. 10, pp. 1617–1629, 2021, doi: 10.1007/s00396-021-04882-x.","apa":"Abdelaty, M. S. A., & Kuckling, D. (2021). Altering of lower critical solution temperature of environmentally responsive poly (N-isopropylacrylamide-co-acrylic acid-co-vanillin acrylate) affected by acrylic acid, vanillin acrylate, and post-polymerization modification. Colloid and Polymer Science, 299(10), 1617–1629. https://doi.org/10.1007/s00396-021-04882-x","bibtex":"@article{Abdelaty_Kuckling_2021, title={Altering of lower critical solution temperature of environmentally responsive poly (N-isopropylacrylamide-co-acrylic acid-co-vanillin acrylate) affected by acrylic acid, vanillin acrylate, and post-polymerization modification}, volume={299}, DOI={10.1007/s00396-021-04882-x}, number={10}, journal={Colloid and Polymer Science}, publisher={Springer Science and Business Media LLC}, author={Abdelaty, Momen S. A. and Kuckling, Dirk}, year={2021}, pages={1617–1629} }","ama":"Abdelaty MSA, Kuckling D. Altering of lower critical solution temperature of environmentally responsive poly (N-isopropylacrylamide-co-acrylic acid-co-vanillin acrylate) affected by acrylic acid, vanillin acrylate, and post-polymerization modification. Colloid and Polymer Science. 2021;299(10):1617-1629. doi:10.1007/s00396-021-04882-x","mla":"Abdelaty, Momen S. A., and Dirk Kuckling. “Altering of Lower Critical Solution Temperature of Environmentally Responsive Poly (N-Isopropylacrylamide-Co-Acrylic Acid-Co-Vanillin Acrylate) Affected by Acrylic Acid, Vanillin Acrylate, and Post-Polymerization Modification.” Colloid and Polymer Science, vol. 299, no. 10, Springer Science and Business Media LLC, 2021, pp. 1617–29, doi:10.1007/s00396-021-04882-x."},"_id":"31022","publisher":"Springer Science and Business Media LLC","page":"1617-1629","volume":299,"user_id":"94","status":"public"},{"issue":"3","publication":"Journal of Physics D: Applied Physics","type":"journal_article","keyword":["Surfaces","Coatings and Films","Acoustics and Ultrasonics","Condensed Matter Physics","Electronic","Optical and Magnetic Materials"],"department":[{"_id":"302"}],"date_created":"2022-12-21T09:32:09Z","date_updated":"2022-12-21T09:32:39Z","publication_status":"published","intvolume":" 55","title":"Durability of nanolayer Ti–Al–O–N hard coatings under simulated polycarbonate melt processing conditions","year":"2021","publication_identifier":{"issn":["0022-3727","1361-6463"]},"author":[{"last_name":"Brögelmann","first_name":"T","full_name":"Brögelmann, T"},{"full_name":"Bobzin, K","first_name":"K","last_name":"Bobzin"},{"last_name":"Grundmeier","first_name":"Guido","full_name":"Grundmeier, Guido","id":"194"},{"full_name":"de los Arcos, T","first_name":"T","last_name":"de los Arcos"},{"full_name":"Kruppe, N C","last_name":"Kruppe","first_name":"N C"},{"full_name":"Schwiderek, S","first_name":"S","last_name":"Schwiderek"},{"last_name":"Carlet","first_name":"M","full_name":"Carlet, M"}],"doi":"10.1088/1361-6463/ac2e31","article_number":"035204","language":[{"iso":"eng"}],"citation":{"ieee":"T. Brögelmann et al., “Durability of nanolayer Ti–Al–O–N hard coatings under simulated polycarbonate melt processing conditions,” Journal of Physics D: Applied Physics, vol. 55, no. 3, Art. no. 035204, 2021, doi: 10.1088/1361-6463/ac2e31.","apa":"Brögelmann, T., Bobzin, K., Grundmeier, G., de los Arcos, T., Kruppe, N. C., Schwiderek, S., & Carlet, M. (2021). Durability of nanolayer Ti–Al–O–N hard coatings under simulated polycarbonate melt processing conditions. Journal of Physics D: Applied Physics, 55(3), Article 035204. https://doi.org/10.1088/1361-6463/ac2e31","chicago":"Brögelmann, T, K Bobzin, Guido Grundmeier, T de los Arcos, N C Kruppe, S Schwiderek, and M Carlet. “Durability of Nanolayer Ti–Al–O–N Hard Coatings under Simulated Polycarbonate Melt Processing Conditions.” Journal of Physics D: Applied Physics 55, no. 3 (2021). https://doi.org/10.1088/1361-6463/ac2e31.","short":"T. Brögelmann, K. Bobzin, G. Grundmeier, T. de los Arcos, N.C. Kruppe, S. Schwiderek, M. Carlet, Journal of Physics D: Applied Physics 55 (2021).","mla":"Brögelmann, T., et al. “Durability of Nanolayer Ti–Al–O–N Hard Coatings under Simulated Polycarbonate Melt Processing Conditions.” Journal of Physics D: Applied Physics, vol. 55, no. 3, 035204, IOP Publishing, 2021, doi:10.1088/1361-6463/ac2e31.","bibtex":"@article{Brögelmann_Bobzin_Grundmeier_de los Arcos_Kruppe_Schwiderek_Carlet_2021, title={Durability of nanolayer Ti–Al–O–N hard coatings under simulated polycarbonate melt processing conditions}, volume={55}, DOI={10.1088/1361-6463/ac2e31}, number={3035204}, journal={Journal of Physics D: Applied Physics}, publisher={IOP Publishing}, author={Brögelmann, T and Bobzin, K and Grundmeier, Guido and de los Arcos, T and Kruppe, N C and Schwiderek, S and Carlet, M}, year={2021} }","ama":"Brögelmann T, Bobzin K, Grundmeier G, et al. Durability of nanolayer Ti–Al–O–N hard coatings under simulated polycarbonate melt processing conditions. Journal of Physics D: Applied Physics. 2021;55(3). doi:10.1088/1361-6463/ac2e31"},"status":"public","user_id":"48864","volume":55,"publisher":"IOP Publishing","_id":"34647"},{"date_created":"2022-12-21T09:30:44Z","department":[{"_id":"302"}],"keyword":["Condensed Matter Physics","General Materials Science"],"type":"journal_article","publication":"Advanced Engineering Materials","issue":"10","language":[{"iso":"eng"}],"article_number":"2100446","doi":"10.1002/adem.202100446","publication_identifier":{"issn":["1438-1656","1527-2648"]},"author":[{"last_name":"Tripathi","first_name":"Tripurari Sharan","full_name":"Tripathi, Tripurari Sharan"},{"full_name":"Wilken, Martin","last_name":"Wilken","first_name":"Martin"},{"full_name":"Hoppe, Christian","first_name":"Christian","last_name":"Hoppe","id":"27401"},{"last_name":"de los Arcos","first_name":"Teresa","full_name":"de los Arcos, Teresa"},{"full_name":"Grundmeier, Guido","last_name":"Grundmeier","first_name":"Guido","id":"194"},{"first_name":"Anjana","last_name":"Devi","full_name":"Devi, Anjana"},{"first_name":"Maarit","last_name":"Karppinen","full_name":"Karppinen, Maarit"}],"title":"Atomic Layer Deposition of Copper Metal Films from Cu(acac) 2 and Hydroquinone Reductant","year":"2021","intvolume":" 23","publication_status":"published","date_updated":"2022-12-21T09:31:52Z","citation":{"bibtex":"@article{Tripathi_Wilken_Hoppe_de los Arcos_Grundmeier_Devi_Karppinen_2021, title={Atomic Layer Deposition of Copper Metal Films from Cu(acac) 2 and Hydroquinone Reductant}, volume={23}, DOI={10.1002/adem.202100446}, number={102100446}, journal={Advanced Engineering Materials}, publisher={Wiley}, author={Tripathi, Tripurari Sharan and Wilken, Martin and Hoppe, Christian and de los Arcos, Teresa and Grundmeier, Guido and Devi, Anjana and Karppinen, Maarit}, year={2021} }","ama":"Tripathi TS, Wilken M, Hoppe C, et al. Atomic Layer Deposition of Copper Metal Films from Cu(acac) 2 and Hydroquinone Reductant. Advanced Engineering Materials. 2021;23(10). doi:10.1002/adem.202100446","mla":"Tripathi, Tripurari Sharan, et al. “Atomic Layer Deposition of Copper Metal Films from Cu(Acac) 2 and Hydroquinone Reductant.” Advanced Engineering Materials, vol. 23, no. 10, 2100446, Wiley, 2021, doi:10.1002/adem.202100446.","chicago":"Tripathi, Tripurari Sharan, Martin Wilken, Christian Hoppe, Teresa de los Arcos, Guido Grundmeier, Anjana Devi, and Maarit Karppinen. “Atomic Layer Deposition of Copper Metal Films from Cu(Acac) 2 and Hydroquinone Reductant.” Advanced Engineering Materials 23, no. 10 (2021). https://doi.org/10.1002/adem.202100446.","short":"T.S. Tripathi, M. Wilken, C. Hoppe, T. de los Arcos, G. Grundmeier, A. Devi, M. Karppinen, Advanced Engineering Materials 23 (2021).","ieee":"T. S. Tripathi et al., “Atomic Layer Deposition of Copper Metal Films from Cu(acac) 2 and Hydroquinone Reductant,” Advanced Engineering Materials, vol. 23, no. 10, Art. no. 2100446, 2021, doi: 10.1002/adem.202100446.","apa":"Tripathi, T. S., Wilken, M., Hoppe, C., de los Arcos, T., Grundmeier, G., Devi, A., & Karppinen, M. (2021). Atomic Layer Deposition of Copper Metal Films from Cu(acac) 2 and Hydroquinone Reductant. Advanced Engineering Materials, 23(10), Article 2100446. https://doi.org/10.1002/adem.202100446"},"_id":"34645","publisher":"Wiley","volume":23,"user_id":"48864","status":"public"},{"article_number":"015001","language":[{"iso":"eng"}],"doi":"10.1088/2515-7639/ac363d","year":"2021","title":"On topological materials as photocatalysts for water splitting by visible light","publication_identifier":{"issn":["2515-7639"]},"author":[{"full_name":"Ranjbar, Ahmad","last_name":"Ranjbar","first_name":"Ahmad"},{"full_name":"Mirhosseini, Hossein","first_name":"Hossein","last_name":"Mirhosseini"},{"first_name":"Thomas D","last_name":"Kühne","full_name":"Kühne, Thomas D"}],"date_updated":"2022-10-09T15:25:19Z","publication_status":"published","intvolume":" 5","date_created":"2022-10-09T15:25:09Z","type":"journal_article","keyword":["Condensed Matter Physics","General Materials Science","Atomic and Molecular Physics","and Optics"],"department":[{"_id":"613"}],"issue":"1","publication":"Journal of Physics: Materials","abstract":[{"lang":"eng","text":"Abstract\r\n We performed a virtual materials screening to identify promising topological materials for photocatalytic water splitting under visible light irradiation. Topological compounds were screened based on band gap, band edge energy, and thermodynamics stability criteria. In addition, topological types for our final candidates were computed based on electronic structures calculated usingthe hybrid density functional theory including exact Hartree–Fock exchange. Our final list contains materials which have band gaps between 1.0 and 2.7 eV in addition to band edge energies suitable for water oxidation and reduction. However, the topological types of these compounds calculated with the hybrid functional differ from those reported previously. To that end, we discuss the importance of computational methods for the calculation of atomic and electronic structures in materials screening processes."}],"_id":"33587","publisher":"IOP Publishing","user_id":"71051","volume":5,"status":"public","citation":{"mla":"Ranjbar, Ahmad, et al. “On Topological Materials as Photocatalysts for Water Splitting by Visible Light.” Journal of Physics: Materials, vol. 5, no. 1, 015001, IOP Publishing, 2021, doi:10.1088/2515-7639/ac363d.","ama":"Ranjbar A, Mirhosseini H, Kühne TD. On topological materials as photocatalysts for water splitting by visible light. Journal of Physics: Materials. 2021;5(1). doi:10.1088/2515-7639/ac363d","bibtex":"@article{Ranjbar_Mirhosseini_Kühne_2021, title={On topological materials as photocatalysts for water splitting by visible light}, volume={5}, DOI={10.1088/2515-7639/ac363d}, number={1015001}, journal={Journal of Physics: Materials}, publisher={IOP Publishing}, author={Ranjbar, Ahmad and Mirhosseini, Hossein and Kühne, Thomas D}, year={2021} }","apa":"Ranjbar, A., Mirhosseini, H., & Kühne, T. D. (2021). On topological materials as photocatalysts for water splitting by visible light. Journal of Physics: Materials, 5(1), Article 015001. https://doi.org/10.1088/2515-7639/ac363d","ieee":"A. Ranjbar, H. Mirhosseini, and T. D. Kühne, “On topological materials as photocatalysts for water splitting by visible light,” Journal of Physics: Materials, vol. 5, no. 1, Art. no. 015001, 2021, doi: 10.1088/2515-7639/ac363d.","chicago":"Ranjbar, Ahmad, Hossein Mirhosseini, and Thomas D Kühne. “On Topological Materials as Photocatalysts for Water Splitting by Visible Light.” Journal of Physics: Materials 5, no. 1 (2021). https://doi.org/10.1088/2515-7639/ac363d.","short":"A. Ranjbar, H. Mirhosseini, T.D. Kühne, Journal of Physics: Materials 5 (2021)."}},{"abstract":[{"lang":"eng","text":"The origin of strong interactions between water molecules and porous C2N surfaces is investigated by using a combination of model materials, volumetric physisorption measurements, solid-state NMR spectroscopy, and DFT calculations."}],"publication":"Journal of Materials Chemistry A","issue":"39","department":[{"_id":"613"}],"keyword":["General Materials Science","Renewable Energy","Sustainability and the Environment","General Chemistry"],"type":"journal_article","date_created":"2022-10-10T08:08:53Z","intvolume":" 9","date_updated":"2022-10-10T08:09:44Z","publication_status":"published","publication_identifier":{"issn":["2050-7488","2050-7496"]},"author":[{"last_name":"Heske","first_name":"Julian Joachim","full_name":"Heske, Julian Joachim","id":"53238"},{"last_name":"Walczak","first_name":"Ralf","full_name":"Walczak, Ralf"},{"full_name":"Epping, Jan D.","first_name":"Jan D.","last_name":"Epping"},{"first_name":"Sol","last_name":"Youk","full_name":"Youk, Sol"},{"last_name":"Sahoo","first_name":"Sudhir K.","full_name":"Sahoo, Sudhir K."},{"full_name":"Antonietti, Markus","last_name":"Antonietti","first_name":"Markus"},{"last_name":"Kühne","first_name":"Thomas","full_name":"Kühne, Thomas","id":"49079"},{"first_name":"Martin","last_name":"Oschatz","full_name":"Oschatz, Martin"}],"title":"When water becomes an integral part of carbon – combining theory and experiment to understand the zeolite-like water adsorption properties of porous C2N materials","year":"2021","doi":"10.1039/d1ta05122a","language":[{"iso":"eng"}],"citation":{"chicago":"Heske, Julian Joachim, Ralf Walczak, Jan D. Epping, Sol Youk, Sudhir K. Sahoo, Markus Antonietti, Thomas Kühne, and Martin Oschatz. “When Water Becomes an Integral Part of Carbon – Combining Theory and Experiment to Understand the Zeolite-like Water Adsorption Properties of Porous C2N Materials.” Journal of Materials Chemistry A 9, no. 39 (2021): 22563–72. https://doi.org/10.1039/d1ta05122a.","short":"J.J. Heske, R. Walczak, J.D. Epping, S. Youk, S.K. Sahoo, M. Antonietti, T. Kühne, M. Oschatz, Journal of Materials Chemistry A 9 (2021) 22563–22572.","apa":"Heske, J. J., Walczak, R., Epping, J. D., Youk, S., Sahoo, S. K., Antonietti, M., Kühne, T., & Oschatz, M. (2021). When water becomes an integral part of carbon – combining theory and experiment to understand the zeolite-like water adsorption properties of porous C2N materials. Journal of Materials Chemistry A, 9(39), 22563–22572. https://doi.org/10.1039/d1ta05122a","ieee":"J. J. Heske et al., “When water becomes an integral part of carbon – combining theory and experiment to understand the zeolite-like water adsorption properties of porous C2N materials,” Journal of Materials Chemistry A, vol. 9, no. 39, pp. 22563–22572, 2021, doi: 10.1039/d1ta05122a.","ama":"Heske JJ, Walczak R, Epping JD, et al. When water becomes an integral part of carbon – combining theory and experiment to understand the zeolite-like water adsorption properties of porous C2N materials. Journal of Materials Chemistry A. 2021;9(39):22563-22572. doi:10.1039/d1ta05122a","bibtex":"@article{Heske_Walczak_Epping_Youk_Sahoo_Antonietti_Kühne_Oschatz_2021, title={When water becomes an integral part of carbon – combining theory and experiment to understand the zeolite-like water adsorption properties of porous C2N materials}, volume={9}, DOI={10.1039/d1ta05122a}, number={39}, journal={Journal of Materials Chemistry A}, publisher={Royal Society of Chemistry (RSC)}, author={Heske, Julian Joachim and Walczak, Ralf and Epping, Jan D. and Youk, Sol and Sahoo, Sudhir K. and Antonietti, Markus and Kühne, Thomas and Oschatz, Martin}, year={2021}, pages={22563–22572} }","mla":"Heske, Julian Joachim, et al. “When Water Becomes an Integral Part of Carbon – Combining Theory and Experiment to Understand the Zeolite-like Water Adsorption Properties of Porous C2N Materials.” Journal of Materials Chemistry A, vol. 9, no. 39, Royal Society of Chemistry (RSC), 2021, pp. 22563–72, doi:10.1039/d1ta05122a."},"status":"public","volume":9,"user_id":"71051","publisher":"Royal Society of Chemistry (RSC)","_id":"33643","page":"22563-22572"},{"issue":"8","publication":"Materials Research Express","abstract":[{"text":"Abstract\r\n Dual-ion batteries are considered to be an emerging viable energy storage technology owing to their safety, high power capability, low cost, and scalability. Intercalation of anions into a graphite positive electrode provides high operating voltage and improved energy density to such dual-ion batteries. In this work, we have performed a combinatorial study of graphite intercalation compounds considering four anions, namely hexafluorophosphate (PF\r\n \r\n\r\n\r\n \r\n \r\n \r\n \r\n 6\r\n \r\n \r\n −\r\n \r\n \r\n \r\n \r\n ), perchlorate (ClO\r\n \r\n\r\n\r\n \r\n \r\n \r\n \r\n 4\r\n \r\n \r\n −\r\n \r\n \r\n \r\n \r\n ), bis(fluorosulfonyl)imide (FSI−), and bis(trifluoromethanesulfonyl)imide (TFSI−), via first-principles calculations. The structural properties and energetics of the intercalation compounds are compared based on different sizes, geometries, and the physical and chemical properties of the intercalated anions. The staging mechanism of anion intercalation into graphite and the specific capacities, and voltage profiles of the intercalated compounds are investigated. A comparison regarding battery electrochemistry is also done with available experimental observations. Our calculated intercalation energies and voltage profiles show that the initial anion intercalation into graphite is less favorable than subsequent ones for all the anions considered in this study. Although the effect of the size of anions in a graphite cathode on various properties of the intercalated compounds is not as significant as the size of cations in a graphite anode, some distinction between the studied anions can still be made. Among the studied anions, the intercalation compounds based on PF\r\n \r\n\r\n\r\n \r\n \r\n \r\n \r\n 6\r\n \r\n \r\n −\r\n \r\n \r\n \r\n \r\n are the most stable ones. These PF\r\n \r\n\r\n\r\n \r\n \r\n \r\n \r\n 6\r\n \r\n \r\n −\r\n \r\n \r\n \r\n \r\n anions cause relatively small structural deformations of the graphite and have the highest oxidative ability, highest onset voltage, and highest diffusion barrier along the graphene sheets. The overall small diffusion barriers of the anions within graphite explain the high rate capability of dual-ion batteries.","lang":"eng"}],"date_created":"2022-10-10T08:22:50Z","department":[{"_id":"613"}],"type":"journal_article","keyword":["Metals and Alloys","Polymers and Plastics","Surfaces","Coatings and Films","Biomaterials","Electronic","Optical and Magnetic Materials"],"publication_identifier":{"issn":["2053-1591"]},"author":[{"id":"71511","full_name":"Chugh, Manjusha","last_name":"Chugh","first_name":"Manjusha"},{"full_name":"Jain, Mitisha","first_name":"Mitisha","last_name":"Jain"},{"first_name":"Gang","last_name":"Wang","full_name":"Wang, Gang"},{"first_name":"Ali Shaygan","last_name":"Nia","full_name":"Nia, Ali Shaygan"},{"id":"71051","full_name":"Mirhosseini, Hossein","first_name":"Hossein","orcid":"0000-0001-6179-1545","last_name":"Mirhosseini"},{"full_name":"Kühne, Thomas","first_name":"Thomas","last_name":"Kühne","id":"49079"}],"year":"2021","title":"A combinatorial study of electrochemical anion intercalation into graphite","intvolume":" 8","publication_status":"published","date_updated":"2022-10-10T08:23:07Z","language":[{"iso":"eng"}],"article_number":"085502","doi":"10.1088/2053-1591/ac1965","citation":{"ama":"Chugh M, Jain M, Wang G, Nia AS, Mirhosseini H, Kühne T. A combinatorial study of electrochemical anion intercalation into graphite. Materials Research Express. 2021;8(8). doi:10.1088/2053-1591/ac1965","bibtex":"@article{Chugh_Jain_Wang_Nia_Mirhosseini_Kühne_2021, title={A combinatorial study of electrochemical anion intercalation into graphite}, volume={8}, DOI={10.1088/2053-1591/ac1965}, number={8085502}, journal={Materials Research Express}, publisher={IOP Publishing}, author={Chugh, Manjusha and Jain, Mitisha and Wang, Gang and Nia, Ali Shaygan and Mirhosseini, Hossein and Kühne, Thomas}, year={2021} }","mla":"Chugh, Manjusha, et al. “A Combinatorial Study of Electrochemical Anion Intercalation into Graphite.” Materials Research Express, vol. 8, no. 8, 085502, IOP Publishing, 2021, doi:10.1088/2053-1591/ac1965.","short":"M. Chugh, M. Jain, G. Wang, A.S. Nia, H. Mirhosseini, T. Kühne, Materials Research Express 8 (2021).","chicago":"Chugh, Manjusha, Mitisha Jain, Gang Wang, Ali Shaygan Nia, Hossein Mirhosseini, and Thomas Kühne. “A Combinatorial Study of Electrochemical Anion Intercalation into Graphite.” Materials Research Express 8, no. 8 (2021). https://doi.org/10.1088/2053-1591/ac1965.","apa":"Chugh, M., Jain, M., Wang, G., Nia, A. S., Mirhosseini, H., & Kühne, T. (2021). A combinatorial study of electrochemical anion intercalation into graphite. Materials Research Express, 8(8), Article 085502. https://doi.org/10.1088/2053-1591/ac1965","ieee":"M. Chugh, M. Jain, G. Wang, A. S. Nia, H. Mirhosseini, and T. Kühne, “A combinatorial study of electrochemical anion intercalation into graphite,” Materials Research Express, vol. 8, no. 8, Art. no. 085502, 2021, doi: 10.1088/2053-1591/ac1965."},"status":"public","publisher":"IOP Publishing","_id":"33655","volume":8,"user_id":"71051"}]