@article{47122, abstract = {{AbstractFeCo alloys are important materials used in pumps and motors in the offshore oil and gas drilling industry. These alloys are subjected to marine environments with a high NaCl concentration, therefore, corrosion and catastrophic failure are anticipated. So, the surface dissolution of additively manufactured FeCo samples is investigated in a quasi-in situ manner, in particular, the pitting corrosion in 5.0 wt pct NaCl solution. The local dissolution of the same sample region is monitored after 24, 72, and 168 hours. Here, the formation of rectangular and circular pits of ultra-fine dimensions (less than 0.5 µm) is observed with increasing immersion time. In addition, the formation of a corrosion-inhibiting surface layer is detected on the sample surface. Surface dissolution leads to a change in the surface structure, however, no change in grain shape or grain size is noticed. The surface topography after local dissolution is correlated to the grain orientation. Quasi-in situ analysis shows the preferential dissolution of high-angle grain boundaries (HAGBs) leading to a change in the fraction of HAGBs and low-angle grain boundaries fraction (LAGBs). For the FeCo sample, a potentiodynamic polarisation test reveals a corrosion potential (Ecorr) of − 0.475 V referred to the standard hydrogen electrode (SHE) and a corrosion exchange current density (icorr) of 0.0848 A/m2. Furthermore, quasi-in situ experiments showed that grains oriented along certain crystallographic directions are corroding more compared to other grains leading to a significant decrease in the local surface height. Grains with a plane normal close to the $$\langle {1}00\rangle$$ ⟨ 100 ⟩ direction reveal lower surface dissolution and higher corrosion resistance, whereas planes normal close to the $$\langle {11}0\rangle$$ ⟨ 110 ⟩ direction and the $$\langle {111}\rangle$$ ⟨ 111 ⟩ direction exhibit a higher surface dissolution.}}, author = {{Pramanik, Sudipta and Krüger, Jan Tobias and Schaper, Mirko and Hoyer, Kay-Peter}}, issn = {{1073-5623}}, journal = {{Metallurgical and Materials Transactions A}}, keywords = {{Metals and Alloys, Mechanics of Materials, Condensed Matter Physics}}, publisher = {{Springer Science and Business Media LLC}}, title = {{{Quasi-In Situ Localized Corrosion of an Additively Manufactured FeCo Alloy in 5 Wt Pct NaCl Solution}}}, doi = {{10.1007/s11661-023-07186-7}}, year = {{2023}}, } @inproceedings{46813, abstract = {{Modelling of dynamic systems plays an important role in many engineering disciplines. Two different approaches are physical modelling and data‐driven modelling, both of which have their respective advantages and disadvantages. By combining these two approaches, hybrid models can be created in which the respective disadvantages are mitigated, with discrepancy models being a particular subclass. Here, the basic system behaviour is described physically, that is, in the form of differential equations. Inaccuracies resulting from insufficient modelling or numerics lead to a discrepancy between the measurements and the model, which can be compensated by a data‐driven error correction term. Since discrepancy methods still require a large amount of measurement data, this paper investigates the extent to which a single discrepancy model can be trained for a physical model with additional parameter dependencies without the need for retraining. As an example, a damped electromagnetic oscillating circuit is used. The physical model is realised by a differential equation describing the electric current, considering only inductance and capacitance; dissipation due to resistance is neglected. This creates a discrepancy between measurement and model, which is corrected by a data‐driven model. In the experiments, the inductance and the capacity are varied. It is found that the same data‐driven model can only be used if additional parametric dependencies in the data‐driven term are considered as well.}}, author = {{Wohlleben, Meike Claudia and Muth, Lars and Peitz, Sebastian and Sextro, Walter}}, booktitle = {{Proceedings in Applied Mathematics and Mechanics}}, issn = {{1617-7061}}, keywords = {{Electrical and Electronic Engineering, Atomic and Molecular Physics, and Optics}}, publisher = {{Wiley}}, title = {{{Transferability of a discrepancy model for the dynamics of electromagnetic oscillating circuits}}}, doi = {{10.1002/pamm.202300039}}, year = {{2023}}, } @article{36471, abstract = {{Superconducting nanowire single-photon detectors (SNSPDs) show near unity efficiency, low dark count rate, and short recovery time. Combining these characteristics with temporal control of SNSPDs broadens their applications as in active de-latching for higher dynamic range counting or temporal filtering for pump-probe spectroscopy or LiDAR. To that end, we demonstrate active gating of an SNSPD with a minimum off-to-on rise time of 2.4 ns and a total gate length of 5.0 ns. We show how the rise time depends on the inductance of the detector in combination with the control electronics. The gate window is demonstrated to be fully and freely, electrically tunable up to 500 ns at a repetition rate of 1.0 MHz, as well as ungated, free-running operation. Control electronics to generate the gating are mounted on the 2.3 K stage of a closed-cycle sorption cryostat, while the detector is operated on the cold stage at 0.8 K. We show that the efficiency and timing jitter of the detector is not altered during the on-time of the gating window. We exploit gated operation to demonstrate a method to increase in the photon counting dynamic range by a factor 11.2, as well as temporal filtering of a strong pump in an emulated pump-probe experiment.}}, author = {{Hummel, Thomas and Widhalm, Alex and Höpker, Jan Philipp and Jöns, Klaus and Chang, Jin and Fognini, Andreas and Steinhauer, Stephan and Zwiller, Val and Zrenner, Artur and Bartley, Tim}}, issn = {{1094-4087}}, journal = {{Optics Express}}, keywords = {{Atomic and Molecular Physics, and Optics}}, number = {{1}}, publisher = {{Optica Publishing Group}}, title = {{{Nanosecond gating of superconducting nanowire single-photon detectors using cryogenic bias circuitry}}}, doi = {{10.1364/oe.472058}}, volume = {{31}}, year = {{2023}}, } @article{41035, author = {{Sharapova, Polina R. and Kruk, Sergey S. and Solntsev, Alexander S.}}, issn = {{1863-8880}}, journal = {{Laser & Photonics Reviews}}, keywords = {{Condensed Matter Physics, Atomic and Molecular Physics, and Optics, Electronic, Optical and Magnetic Materials}}, publisher = {{Wiley}}, title = {{{Nonlinear Dielectric Nanoresonators and Metasurfaces: Toward Efficient Generation of Entangled Photons}}}, doi = {{10.1002/lpor.202200408}}, year = {{2023}}, } @article{44081, author = {{Serino, Laura and Gil López, Jano and Stefszky, Michael and Ricken, Raimund and Eigner, Christof and Brecht, Benjamin and Silberhorn, Christine}}, issn = {{2691-3399}}, journal = {{PRX Quantum}}, keywords = {{General Physics and Astronomy, Mathematical Physics, Applied Mathematics, Electronic, Optical and Magnetic Materials, Electrical and Electronic Engineering, General Computer Science}}, number = {{2}}, publisher = {{American Physical Society (APS)}}, title = {{{Realization of a Multi-Output Quantum Pulse Gate for Decoding High-Dimensional Temporal Modes of Single-Photon States}}}, doi = {{10.1103/prxquantum.4.020306}}, volume = {{4}}, year = {{2023}}, } @article{37200, abstract = {{(1) This work answers the question of whether and to what extent there is a significant difference in mechanical properties when different additive manufacturing processes are applied to the material 1.2709. The Laser-Powder-Bed-Fusion (L-PBF) and Laser-Metal-Deposition (LMD) processes are considered, as they differ fundamentally in the way a part is manufactured. (2) Known process parameters for low-porosity parts were used to fabricate tensile strength specimens. Half of the specimens were heat-treated, and all specimens were tested for mechanical properties in a quasi-static tensile test. In addition, the material hardness was determined. (3) It was found that, firstly, heat treatment resulted in a sharp increase in mechanical properties such as hardness, elastic modulus, yield strength and ultimate strength. In addition to the increase in these properties, the elongation at break also decreases significantly after heat treatment. The choice of process, on the other hand, does not give either process a clear advantage in terms of mechanical properties but shows that it is necessary to consider the essential mechanical properties for a desired application.}}, author = {{Gnaase, Stefan and Niggemeyer, Dennis and Lehnert, Dennis and Bödger, Christian and Tröster, Thomas}}, issn = {{2073-4352}}, journal = {{Crystals}}, keywords = {{Inorganic Chemistry, Condensed Matter Physics, General Materials Science, General Chemical Engineering}}, number = {{2}}, publisher = {{MDPI AG}}, title = {{{Comparative Study of the Influence of Heat Treatment and Additive Manufacturing Process (LMD & L-PBF) on the Mechanical Properties of Specimens Manufactured from 1.2709}}}, doi = {{10.3390/cryst13020157}}, volume = {{13}}, year = {{2023}}, } @article{45859, abstract = {{Sport-related concussions (SRC) are characterized by impaired autonomic control. Heart rate variability (HRV) offers easily obtainable diagnostic approaches to SRC-associated dysautonomia, but studies investigating HRV during sleep, a crucial time for post-traumatic cerebral regeneration, are relatively sparse. The aim of this study was to assess nocturnal HRV in athletes during their return to sports (RTS) after SRC in their home environment using wireless wrist sensors (E4, Empatica, Milan, Italy) and to explore possible relations with clinical concussion-associated sleep symptoms. Eighteen SRC athletes wore a wrist sensor obtaining photoplethysmographic data at night during RTS as well as one night after full clinical recovery post RTS (>3 weeks). Nocturnal heart rate and parasympathetic activity of HRV (RMSSD) were calculated and compared using the Mann–Whitney U Test to values of eighteen; matched by sex, age, sport, and expertise, control athletes underwent the identical protocol. During RTS, nocturnal RMSSD of SRC athletes (Mdn = 77.74 ms) showed a trend compared to controls (Mdn = 95.68 ms, p = 0.021, r = −0.382, p adjusted using false discovery rate = 0.126) and positively correlated to “drowsiness” (r = 0.523, p = 0.023, p adjusted = 0.046). Post RTS, no differences in RMSSD between groups were detected. The presented findings in nocturnal cardiac parasympathetic activity during nights of RTS in SRC athletes might be a result of concussion, although its relation to recovery still needs to be elucidated. Utilization of wireless sensors and wearable technologies in home-based settings offer a possibility to obtain helpful objective data in the management of SRC.}}, author = {{Delling, Anne Carina and Jakobsmeyer, Rasmus and Coenen, Jessica and Christiansen, Nele and Reinsberger, Claus}}, issn = {{1424-8220}}, journal = {{Sensors}}, keywords = {{Electrical and Electronic Engineering, Biochemistry, Instrumentation, Atomic and Molecular Physics, and Optics, Analytical Chemistry}}, number = {{9}}, publisher = {{MDPI AG}}, title = {{{Home-Based Measurements of Nocturnal Cardiac Parasympathetic Activity in Athletes during Return to Sport after Sport-Related Concussion}}}, doi = {{10.3390/s23094190}}, volume = {{23}}, year = {{2023}}, } @article{43032, abstract = {{Abstract The accessibility to rheological parameters for concrete is becoming more and more relevant. This is mainly related to the constantly emerging challenges, such as not only the development of high-strength concretes is progressing very fast but also the simulation of the flow behaviour is of high importance. The main problem, however, is that the rheological characterisation of fresh concrete is not possible via commercial rheometers. The so-called concrete rheometers provide valuable relative values for comparing different concretes, but they cannot measure absolute values. Therefore, we developed an adaptive coaxial concrete rheometer (ACCR) that allows the measurement of fresh concrete with particles up to d max = 5.5 mm {d}_{{\rm{\max }}}=5.5\hspace{.5em}{\rm{mm}} . The comparison of the ACCR with a commercial rheometer showed very good agreement for selected test materials (Newtonian fluid, shear thinning fluid, suspension, and yield stress fluid), so that self-compacting concrete was subsequently measured. Since these measurements showed a very high reproducibility, the rheological properties of the fresh concrete could be determined with high accuracy. The common flow models (Bingham (B), Herschel–Bulkley, modified Bingham (MB) models) were also tested for their applicability, with the Bingham and the modified Bingham model proving to be the best suitable ones.}}, author = {{Josch, Sebastian and Jesinghausen, Steffen and Schmid, Hans-Joachim}}, issn = {{1617-8106}}, journal = {{Applied Rheology}}, keywords = {{Condensed Matter Physics, General Materials Science}}, number = {{1}}, publisher = {{Walter de Gruyter GmbH}}, title = {{{Development of an adaptive coaxial concrete rheometer and rheological characterisation of fresh concrete}}}, doi = {{10.1515/arh-2022-0140}}, volume = {{33}}, year = {{2023}}, } @article{29716, author = {{Widhalm, Alex and Golla, Christian and Weber, Nils and Mackwitz, Peter and Zrenner, Artur and Meier, Cedrik}}, issn = {{1094-4087}}, journal = {{Optics Express}}, keywords = {{Atomic and Molecular Physics, and Optics}}, number = {{4}}, publisher = {{The Optical Society}}, title = {{{Electric-field-induced second harmonic generation in silicon dioxide}}}, doi = {{10.1364/oe.443489}}, volume = {{30}}, year = {{2022}}, } @article{29809, author = {{Reitz, A. and Grydin, O. and Schaper, M.}}, issn = {{0921-5093}}, journal = {{Materials Science and Engineering: A}}, keywords = {{Mechanical Engineering, Mechanics of Materials, Condensed Matter Physics, General Materials Science}}, publisher = {{Elsevier BV}}, title = {{{Influence of thermomechanical processing on the microstructural and mechanical properties of steel 22MnB5}}}, doi = {{10.1016/j.msea.2022.142780}}, volume = {{838}}, year = {{2022}}, } @article{30195, abstract = {{While plasmonic particles can provide optical resonances in a wide spectral range from the lower visible up to the near-infrared, often, symmetry effects are utilized to obtain particular optical responses. By breaking certain spatial symmetries, chiral structures arise and provide robust chiroptical responses to these plasmonic resonances. Here, we observe strong chiroptical responses in the linear and nonlinear optical regime for chiral L-handed helicoid-III nanoparticles and quantify them by means of an asymmetric factor, the so-called g-factor. We calculate the linear optical g-factors for two distinct chiroptical resonances to −0.12 and –0.43 and the nonlinear optical g-factors to −1.45 and −1.63. The results demonstrate that the chirality of the helicoid-III nanoparticles is strongly enhanced in the nonlinear regime.}}, author = {{Spreyer, Florian and Mun, Jungho and Kim, Hyeohn and Kim, Ryeong Myeong and Nam, Ki Tae and Rho, Junsuk and Zentgraf, Thomas}}, issn = {{2330-4022}}, journal = {{ACS Photonics}}, keywords = {{Electrical and Electronic Engineering, Atomic and Molecular Physics, and Optics, Biotechnology, Electronic, Optical and Magnetic Materials}}, number = {{3}}, pages = {{784–792}}, publisher = {{American Chemical Society (ACS)}}, title = {{{Second Harmonic Optical Circular Dichroism of Plasmonic Chiral Helicoid-III Nanoparticles}}}, doi = {{10.1021/acsphotonics.1c00882}}, volume = {{9}}, year = {{2022}}, } @article{30385, abstract = {{AbstractTailored nanoscale quantum light sources, matching the specific needs of use cases, are crucial building blocks for photonic quantum technologies. Several different approaches to realize solid-state quantum emitters with high performance have been pursued and different concepts for energy tuning have been established. However, the properties of the emitted photons are always defined by the individual quantum emitter and can therefore not be controlled with full flexibility. Here we introduce an all-optical nonlinear method to tailor and control the single photon emission. We demonstrate a laser-controlled down-conversion process from an excited state of a semiconductor quantum three-level system. Based on this concept, we realize energy tuning and polarization control of the single photon emission with a control-laser field. Our results mark an important step towards tailored single photon emission from a photonic quantum system based on quantum optical principles.}}, author = {{Jonas, B. and Heinze, D. and Schöll, E. and Kallert, P. and Langer, T. and Krehs, S. and Widhalm, A. and Jöns, K. D. and Reuter, D. and Schumacher, S. and Zrenner, Artur}}, issn = {{2041-1723}}, journal = {{Nature Communications}}, keywords = {{General Physics and Astronomy, General Biochemistry, Genetics and Molecular Biology, General Chemistry}}, number = {{1}}, publisher = {{Springer Science and Business Media LLC}}, title = {{{Nonlinear down-conversion in a single quantum dot}}}, doi = {{10.1038/s41467-022-28993-3}}, volume = {{13}}, year = {{2022}}, } @article{30880, author = {{Kobecki, Michal and Scherbakov, Alexey V. and Kukhtaruk, Serhii M. and Yaremkevich, Dmytro D. and Henksmeier, Tobias and Trapp, Alexander and Reuter, Dirk and Gusev, Vitalyi E. and Akimov, Andrey V. and Bayer, Manfred}}, issn = {{0031-9007}}, journal = {{Physical Review Letters}}, keywords = {{General Physics and Astronomy}}, number = {{15}}, publisher = {{American Physical Society (APS)}}, title = {{{Giant Photoelasticity of Polaritons for Detection of Coherent Phonons in a Superlattice with Quantum Sensitivity}}}, doi = {{10.1103/physrevlett.128.157401}}, volume = {{128}}, year = {{2022}}, } @article{30920, abstract = {{Abstract Batteries capable of extreme fast-charging (XFC) are a necessity for the deployment of electric vehicles. Material properties of electrodes and electrolytes along with cell parameters such as stack pressure and temperature have coupled, synergistic, and sometimes deleterious effects on fast-charging performance. We develop a new experimental testbed that allows precise and conformal application of electrode stack pressure. We focus on cell capacity degradation using single-layer pouch cells with graphite anodes, LiNi0.5Mn0.3Co0.2O2 (NMC532) cathodes, and carbonate-based electrolyte. In the tested range (10 – 125 psi), cells cycled at higher pressure show higher capacity and less capacity fading. Additionally, Li plating decreases with increasing pressure as observed with scanning electron microscopy (SEM) and optical imaging. While the loss of Li inventory from Li plating is the largest contributor to capacity fade, electrochemical and SEM examination of the NMC cathodes after XFC experiments show increased secondary particle damage at lower pressure. We infer that the better performance at higher pressure is due to more homogenous reactions of active materials across the electrode and less polarization through the electrode thickness. Our study emphasizes the importance of electrode stack pressure in XFC batteries and highlights its subtle role in cell conditions.}}, author = {{Cao, Chuntian and Steinrück, Hans-Georg and Paul, Partha P and Dunlop, Alison R. and Trask, Stephen E. and Jansen, Andrew and Kasse, Robert M and Thampy, Vivek and Yusuf, Maha and Nelson Weker, Johanna and Shyam, Badri and Subbaraman, Ram and Davis, Kelly and Johnston, Christina M and Takacs, Christopher J and Toney, Michael}}, issn = {{0013-4651}}, journal = {{Journal of The Electrochemical Society}}, keywords = {{Materials Chemistry, Electrochemistry, Surfaces, Coatings and Films, Condensed Matter Physics, Renewable Energy, Sustainability and the Environment, Electronic, Optical and Magnetic Materials}}, pages = {{040540}}, publisher = {{The Electrochemical Society}}, title = {{{Conformal Pressure and Fast-Charging Li-Ion Batteries}}}, doi = {{10.1149/1945-7111/ac653f}}, volume = {{169}}, year = {{2022}}, } @article{29902, author = {{Reineke Matsudo, Bernhard and Sain, Basudeb and Carletti, Luca and Zhang, Xue and Gao, Wenlong and Angelis, Costantino and Huang, Lingling and Zentgraf, Thomas}}, issn = {{2198-3844}}, journal = {{Advanced Science}}, keywords = {{General Physics and Astronomy, General Engineering, Biochemistry, Genetics and Molecular Biology (miscellaneous), General Materials Science, General Chemical Engineering, Medicine (miscellaneous)}}, number = {{12}}, publisher = {{Wiley}}, title = {{{Efficient Frequency Conversion with Geometric Phase Control in Optical Metasurfaces}}}, doi = {{10.1002/advs.202104508}}, volume = {{9}}, year = {{2022}}, } @article{30964, author = {{Gao, Wenlong and Sain, Basudeb and Zentgraf, Thomas}}, issn = {{2331-7019}}, journal = {{Physical Review Applied}}, keywords = {{General Physics and Astronomy}}, number = {{4}}, publisher = {{American Physical Society (APS)}}, title = {{{Spin-Orbit Interaction of Light Enabled by Negative Coupling in High-Quality-Factor Optical Metasurfaces}}}, doi = {{10.1103/physrevapplied.17.044022}}, volume = {{17}}, year = {{2022}}, } @article{32108, author = {{Henksmeier, T. and Schulz, J.F. and Kluth, E. and Feneberg, M. and Goldhahn, R. and Sanchez, A.M. and Voigt, M. and Grundmeier, Guido and Reuter, Dirk}}, issn = {{0022-0248}}, journal = {{Journal of Crystal Growth}}, keywords = {{Materials Chemistry, Inorganic Chemistry, Condensed Matter Physics}}, publisher = {{Elsevier BV}}, title = {{{Remote epitaxy of InxGa1-xAs (0 0 1) on graphene covered GaAs(0 0 1) substrates}}}, doi = {{10.1016/j.jcrysgro.2022.126756}}, volume = {{593}}, year = {{2022}}, } @inproceedings{29842, abstract = {{To build successful software products, developers continuously have to discover what features the users really need. This discovery can be achieved with continuous experimentation, testing different software variants with distinct user groups, and deploying the superior variant for all users. However, existing approaches do not focus on explicit modeling of variants and experiments, which offers advantages such as traceability of decisions and combinability of experiments. Therefore, our vision is the provision of model-driven continuous experimentation, which provides the developer with a framework for structuring the experimentation process. For that, we introduce the overall concept, apply it to the experimentation on component-based software architectures and point out future research questions. In particular, we show the applicability by combining feature models for modeling the software variants, users, and experiments (i.e., model-driven) with MAPE-K for the adaptation (i.e., continuous experimentation) and implementing the concept based on the component-based Angular framework.}}, author = {{Gottschalk, Sebastian and Yigitbas, Enes and Engels, Gregor}}, booktitle = {{Proceedings of the 18th International Conference on Software Architecture Companion }}, keywords = {{continuous experimentation, model-driven, component-based software architectures, self-adaptation}}, location = {{Hawaii}}, publisher = {{IEEE}}, title = {{{Model-driven Continuous Experimentation on Component-based Software Architectures }}}, doi = {{10.1109/ICSA-C54293.2022.00011}}, year = {{2022}}, } @article{32432, author = {{Yang, Yu and Huang, Jingyuan and Dornbusch, Daniel and Grundmeier, Guido and Fahmy, Karim and Keller, Adrian and Cheung, David L.}}, issn = {{0743-7463}}, journal = {{Langmuir}}, keywords = {{Electrochemistry, Spectroscopy, Surfaces and Interfaces, Condensed Matter Physics, General Materials Science}}, pages = {{9257–9265}}, publisher = {{American Chemical Society (ACS)}}, title = {{{Effect of Surface Hydrophobicity on the Adsorption of a Pilus-Derived Adhesin-like Peptide}}}, doi = {{10.1021/acs.langmuir.2c01016}}, volume = {{38}}, year = {{2022}}, } @article{34098, author = {{Yusuf, Maha and LaManna, Jacob M. and Paul, Partha P. and Agyeman-Budu, David N. and Cao, Chuntian and Dunlop, Alison R. and Jansen, Andrew N. and Polzin, Bryant J. and Trask, Stephen E. and Tanim, Tanvir R. and Dufek, Eric J. and Thampy, Vivek and Steinrück, Hans-Georg and Toney, Michael F. and Nelson Weker, Johanna}}, issn = {{2666-3864}}, journal = {{Cell Reports Physical Science}}, keywords = {{General Physics and Astronomy, General Energy, General Engineering, General Materials Science, General Chemistry}}, number = {{11}}, pages = {{101145}}, publisher = {{Elsevier BV}}, title = {{{Simultaneous neutron and X-ray tomography for visualization of graphite electrode degradation in fast-charged lithium-ion batteries}}}, doi = {{10.1016/j.xcrp.2022.101145}}, volume = {{3}}, year = {{2022}}, }