@article{46019, abstract = {{We derive efficient algorithms to compute weakly Pareto optimal solutions for smooth, convex and unconstrained multiobjective optimization problems in general Hilbert spaces. To this end, we define a novel inertial gradient-like dynamical system in the multiobjective setting, which trajectories converge weakly to Pareto optimal solutions. Discretization of this system yields an inertial multiobjective algorithm which generates sequences that converge weakly to Pareto optimal solutions. We employ Nesterov acceleration to define an algorithm with an improved convergence rate compared to the plain multiobjective steepest descent method (Algorithm 1). A further improvement in terms of efficiency is achieved by avoiding the solution of a quadratic subproblem to compute a common step direction for all objective functions, which is usually required in first-order methods. Using a different discretization of our inertial gradient-like dynamical system, we obtain an accelerated multiobjective gradient method that does not require the solution of a subproblem in each step (Algorithm 2). While this algorithm does not converge in general, it yields good results on test problems while being faster than standard steepest descent.}}, author = {{Sonntag, Konstantin and Peitz, Sebastian}}, journal = {{Journal of Optimization Theory and Applications}}, publisher = {{Springer}}, title = {{{Fast Multiobjective Gradient Methods with Nesterov Acceleration via Inertial Gradient-Like Systems}}}, doi = {{10.1007/s10957-024-02389-3}}, year = {{2024}}, } @unpublished{51334, abstract = {{The efficient optimization method for locally Lipschitz continuous multiobjective optimization problems from [1] is extended from finite-dimensional problems to general Hilbert spaces. The method iteratively computes Pareto critical points, where in each iteration, an approximation of the subdifferential is computed in an efficient manner and then used to compute a common descent direction for all objective functions. To prove convergence, we present some new optimality results for nonsmooth multiobjective optimization problems in Hilbert spaces. Using these, we can show that every accumulation point of the sequence generated by our algorithm is Pareto critical under common assumptions. Computational efficiency for finding Pareto critical points is numerically demonstrated for multiobjective optimal control of an obstacle problem.}}, author = {{Sonntag, Konstantin and Gebken, Bennet and Müller, Georg and Peitz, Sebastian and Volkwein, Stefan}}, booktitle = {{arXiv:2402.06376}}, title = {{{A Descent Method for Nonsmooth Multiobjective Optimization in Hilbert Spaces}}}, year = {{2024}}, } @unpublished{51731, abstract = {{Estimating the infection risks in indoor environments comprises the assessment of the behavior of virus-laden aerosols, i.e. spreading, mixing, removal by air purifiers etc. A promising experimental approach is based on using non-hazardous surrogate aerosols of similar size, e.g. salt particles, to mimic the virus aerosol behavior. This manuscript addresses the issue how a successful transfer of such experiments can be accomplished. Corresponding experiments in two very different environments, a large community hall and a seminar room, with optional use of air purifiers in various constellations were conducted. While high particle concentrations are advantageous in terms of avoiding influence of background aerosol concentrations, it is shown that appropriate consideration of aggregation and settling are vital to theoretically describe the experimentally determined course of particle concentrations. A corresponding model equation for a well-mixed situation is derived and the required parameters are thoroughly determined in separate experiments independently. It is demonstrated that clean air delivery rates (CADR) of air purifiers determined with this approach may differ substantially from common approaches not explicitly taking into account aggregation. }}, author = {{Beimdiek, Janis and Schmid, Hans-Joachim}}, booktitle = {{Atmosphere}}, keywords = {{surrogate aerosols, indoor air cleaners, ultra-fine particles, COVID-19, test method, field experiments: clean air delivery rate}}, publisher = {{MDPI}}, title = {{{Evaluation of Surrogate Aerosol Experiments to Predict Spreading and Removal of Virus-Laden Aerosols}}}, year = {{2024}}, } @inbook{51790, author = {{Richter, Susanne}}, booktitle = {{Inklusiver Kinderschutz – Anforderungen, Herausforderungen, Perspektiven}}, editor = {{Kieslinger, Daniel and Owsianowski, Judith}}, isbn = {{978-3-7841-3666-0}}, publisher = {{Lambertus}}, title = {{{Herausforderungen in der inklusiven Mädchenarbeit: Begleitforschung der „Inklusiven anonymen Zuflucht“ des Mädchenhaus Bielefeld e.V.}}}, year = {{2024}}, } @article{40171, abstract = {{We present a convolutional framework which significantly reduces the complexity and thus, the computational effort for distributed reinforcement learning control of dynamical systems governed by partial differential equations (PDEs). Exploiting translational equivariances, the high-dimensional distributed control problem can be transformed into a multi-agent control problem with many identical, uncoupled agents. Furthermore, using the fact that information is transported with finite velocity in many cases, the dimension of the agents’ environment can be drastically reduced using a convolution operation over the state space of the PDE, by which we effectively tackle the curse of dimensionality otherwise present in deep reinforcement learning. In this setting, the complexity can be flexibly adjusted via the kernel width or by using a stride greater than one (meaning that we do not place an actuator at each sensor location). Moreover, scaling from smaller to larger domains – or the transfer between different domains – becomes a straightforward task requiring little effort. We demonstrate the performance of the proposed framework using several PDE examples with increasing complexity, where stabilization is achieved by training a low-dimensional deep deterministic policy gradient agent using minimal computing resources.}}, author = {{Peitz, Sebastian and Stenner, Jan and Chidananda, Vikas and Wallscheid, Oliver and Brunton, Steven L. and Taira, Kunihiko}}, journal = {{Physica D: Nonlinear Phenomena}}, pages = {{134096}}, publisher = {{Elsevier}}, title = {{{Distributed Control of Partial Differential Equations Using Convolutional Reinforcement Learning}}}, doi = {{10.1016/j.physd.2024.134096}}, volume = {{461}}, year = {{2024}}, } @article{51841, abstract = {{athematische Kompetenzen digital zu fördern und digitale Kompetenzen mathematisch zu fördern – dies ist eine Forderung der neuen Bildungsstandards mit Blick auf eine Bildung in der digitalen Welt. Gerade das Potenzial digitaler Medien für das fachliche Lernen wurde in vielen Studien bestätigt. Eine sinnvoll gestaltete Einbettung digitaler Medien bietet die Chance, allen fünf Prinzipien eines guten Unterrichts gerecht zu werden: Verstehensorientierung, Durchgängigkeit, kognitive Aktivierung, Lernendenorientierung & Adaptivität und Kommunikationsförderung. Die flächendeckende Nutzung digitaler Medien etabliert sich bislang nur zögerlich. Aber wie können wir Lehrkräfte stärken, digitale Medien sinnvoll einzusetzen? Wir möchten hier die Bandbreite der Möglichkeiten an Beispielen verdeutlichen, ihren Einsatz motivieren und Wege für einen guten Unterricht aufzeigen.}}, author = {{Barzel, Bärbel and Greefrath, Gilbert and Nagel, Mareike and Hoffmann, Max}}, journal = {{mathematik lehren}}, pages = {{42 -- 47}}, title = {{{Digitalisierung als Chance für alle Prinzipien guten Unterrichts}}}, volume = {{242}}, year = {{2024}}, } @misc{50728, author = {{Riedl, Lars}}, booktitle = {{Kölner Zeitschrift für Soziologie und Sozialpsychologie}}, isbn = {{978-3-8376-6682}}, title = {{{Soziologie des Flitzers}}}, doi = {{10.1007/s11577-023-00928-w}}, year = {{2024}}, } @article{52328, abstract = {{In der Professionalisierung von Lehrkräften ist die Selbst-reflexion eine wesentliche Voraussetzung, da sie zentral für die Weiterentwicklung der eigenen Kompetenzen ist. Daraus ergibt sich die Notwendigkeit, bereits in der ersten Phase der Lehrkräftebildung die Selbstreflexion und die Weiterentwicklungsorientierung zu fördern. Hierzu sind auf Grund des sozialen Settings gezielte reflexionsorientierte Workshops chancenreich. Um die Effekte von reflexionsorientierten Workshops und dabei den Zusammenhang zwischen der Selbst-reflexion und der Weiterentwicklungsorientierung zu überprüfen, wurden anhand einer Stichprobe von N = 646 Lehramtsstudierenden die Entwicklung der Selbst-reflexion und Weiterentwicklungsorientierung beim Besuch von Workshops zu überfachlichen Kompetenzen untersucht. Die Datenerhebung erfolgte vor, direkt nach und erneut vier bis sechs Wochen nach den reflexionsorientierten Workshops mittels eines Fragebogens. Durch Varianzanalysen können in Bezug auf die Selbst-reflexion direkt nach den Workshops signifikante Effekte sowie eine konstante Ausprägung vier bis sechs Wochen später nachgewiesen werden. Weiterhin konnte ein signifikanter Anstieg bei der Weiterentwicklungsorientierung über die drei Messzeitpunkte verzeichnet werden. Ebenso zeigte sich ein positiver Effekt der Selbstreflexion auf den Anstieg der Weiterentwicklungsorientierung.}}, author = {{Kleine, Sabrina M and Sohlau, Sylvia and Seifert, Andreas and Buhl, Heike M.}}, journal = {{Herausforderung Lehrer*innenbildung - Zeitschrift zur Konzeption, Gestaltung und Diskussion}}, number = {{1}}, title = {{{Förderung der Selbstreflexion und Weiterentwicklungsorientierung durch reflexionsorientierte Workshops im Lehramtsstudium}}}, doi = {{10.11576/HLZ-6392}}, volume = {{7}}, year = {{2024}}, } @article{52357, author = {{Beimdiek, Janis and Schmid, Hans-Joachim}}, issn = {{2073-4433}}, journal = {{Atmosphere}}, keywords = {{surrogate aerosols, indoor air cleaners, ultra-fine particles, COVID-19, test method, field experiments: clean air delivery rate}}, number = {{3}}, publisher = {{Multidisciplinary Digital Publishing Institute (MDPI)}}, title = {{{Evaluation of Surrogate Aerosol Experiments to Predict Spreading and Removal of Virus-Laden Aerosols}}}, doi = {{ 10.3390/atmos15030305}}, volume = {{15}}, year = {{2024}}, } @article{51122, author = {{Al-Lami, Abbas J.S. and Kenig, Eugeny Y.}}, issn = {{2214-157X}}, journal = {{Case Studies in Thermal Engineering}}, keywords = {{Fluid Flow and Transfer Processes, Engineering (miscellaneous)}}, publisher = {{Elsevier BV}}, title = {{{New pressure drop and heat transfer correlations for turbulent forced convection in internally channeled tube heat exchanger ducts}}}, doi = {{10.1016/j.csite.2024.103993}}, year = {{2024}}, } @misc{52465, author = {{Breckner, Anne}}, title = {{{All you need is love… Gedanken für das neue Jahr}}}, year = {{2024}}, } @article{52503, author = {{Kundisch, Heike and Kremer, H.-Hugo and Otto, Franziska}}, journal = {{QfI - Qualifizierung für Inklusion Online-Zeitschrift zur Forschung über Aus-, Fort- und Weiterbildung pädagogischer Fachkräfte}}, number = {{3}}, title = {{{Selbstinszenierungspraktiken als Weg zu Stärkenorientierung, Selbstbestimmung und Teilhabe – eine Kollegiale Weiterbildung für multiprofessionelle Akteursgruppen im (inklusiven) Übergang Schule-Beruf}}}, doi = {{ https://doi.org/10.21248/qfi.136}}, volume = {{5}}, year = {{2024}}, } @inbook{52511, abstract = {{Sind „soziale Medien“ überhaupt ein Thema für die Geschichtswissenschaft? Ja, denn die längere Geschichte der Digitalisierung, in der die „sozialen Medien“ einzuordnen sind, zählt bereits über 80 Jahre. Konrad Zuse und andere Ingenieure entwickelten seit 1941 die ersten Digitalcomputer, Unternehmer*innen, Wissenschaftler*innen und Staatenlenker*innen setzten diese seit den 1950er Jahren für ihre Zwecke ein, die Zivilgesellschaft adaptierte sie in den darauffolgenden Dekaden – all das prägte die sozio-digitale Landschaft der späteren „sozialen Medien“. Als unmittelbar „nach dem Boom“ etwa um 1970 zahlreiche Industriegesellschaften einen strukturellen Wandel in Wirtschaft, Gesellschaft und Politik durchlebten, war eine Antwort darauf die vermehrte Digitalisierung und Vernetzung. Daraus entwickelte sich die 1990er Jahre als markante Dekade von World Wide Web, Google und Chatdiensten. Die Entwicklung der „sozialen Medien“ ist also unter anderem in eine ökonomische und gesellschaftliche Entwicklung der Aufmerksamkeitsökonomie und in die längeren Veränderungen von Wirtschafts- und Gesellschaftsordnungen der Ausdifferenzierung und partiellen Individualisierung seit den 1960er Jahren einzuordnen. Dadurch lässt sich besser verstehen, welche Prämissen ihnen zugrunde lagen, welche Möglichkeitsräume und Probleme sich daraus ergaben und warum sie die heutige Öffentlichkeit in einer bestimmten Art und Weise dominieren – ohne sie jedoch zu determinieren.}}, author = {{Schmitt, Martin}}, booktitle = {{Soziale Medien – wie sie wurden, was sie sind }}, keywords = {{Digitalgeschichte, Soziale Medien, Technikgeschichte, World Wide Web, Digitalisierung}}, publisher = {{Bundeszentrale für politische Bildung}}, title = {{{Die Vorgeschichte der „sozialen Medien“. Über die Träume digitaler Vergemeinschaftung und freier Kommunikation}}}, year = {{2024}}, } @inbook{52538, abstract = {{Twitter ist jetzt X und befindet sich auf dem absteigenden Ast. Auf diesem Ast sitzt Facebook bereits seit längerem. Der Kurzvideodienst Vine, Vorgänger von TikTok, ist Geschichte. Und auch bei Google klingeln die Alarmglocken angesichts der „neuen“ Konkurrenz durch Microsoft und ChatGPT. Umso dringlicher wird also die Historisierung der „sozialen Medien“, das heißt, sie in ihren historischen Kontext einzuordnen und ihren Mythos zu entzaubern. Dabei wartet das Vorhaben mit einer doppelten Herausforderung auf: Erstens, dass es sich bei den Unternehmen der Branche und zweitens auch bei den dort gebildeten Gemeinschaften um recht flüchtige, wandelhaften Gestalten handelt. Scheitern und Wandel ist Teil der „sozialen Medien“ – und sei es nur in der schnellen Abfolge der Moden des „nächsten großen Dings“. Dementsprechend versucht dieser Beitrag mit einem systematischeren Ansatz als dem der gesellschaftlichen Selbstbeschreibung, die Entwicklung des sozio-digitalen Phänomens „soziale Medien“ in dessen Zeitkontext einzuordnen.}}, author = {{Schmitt, Martin}}, booktitle = {{Soziale Medien – wie sie wurden, was sie sind}}, keywords = {{Digitalgeschichte, Soziale Medien, Technikgeschichte, Wirtschaftsgeschichte, Digitalisierung, Twitter, Facebook, Meta}}, publisher = {{Bundeszentrale für politische Bildung}}, title = {{{Alles geht? Die jüngste Geschichte der „sozialen Medien“. Zwischen Wirtschaft und Gemeinschaft}}}, year = {{2024}}, } @article{33461, abstract = {{Data-driven models for nonlinear dynamical systems based on approximating the underlying Koopman operator or generator have proven to be successful tools for forecasting, feature learning, state estimation, and control. It has become well known that the Koopman generators for control-affine systems also have affine dependence on the input, leading to convenient finite-dimensional bilinear approximations of the dynamics. Yet there are still two main obstacles that limit the scope of current approaches for approximating the Koopman generators of systems with actuation. First, the performance of existing methods depends heavily on the choice of basis functions over which the Koopman generator is to be approximated; and there is currently no universal way to choose them for systems that are not measure preserving. Secondly, if we do not observe the full state, we may not gain access to a sufficiently rich collection of such functions to describe the dynamics. This is because the commonly used method of forming time-delayed observables fails when there is actuation. To remedy these issues, we write the dynamics of observables governed by the Koopman generator as a bilinear hidden Markov model, and determine the model parameters using the expectation-maximization (EM) algorithm. The E-step involves a standard Kalman filter and smoother, while the M-step resembles control-affine dynamic mode decomposition for the generator. We demonstrate the performance of this method on three examples, including recovery of a finite-dimensional Koopman-invariant subspace for an actuated system with a slow manifold; estimation of Koopman eigenfunctions for the unforced Duffing equation; and model-predictive control of a fluidic pinball system based only on noisy observations of lift and drag.}}, author = {{Otto, Samuel E. and Peitz, Sebastian and Rowley, Clarence W.}}, journal = {{SIAM Journal on Applied Dynamical Systems}}, number = {{1}}, pages = {{885--923}}, publisher = {{SIAM}}, title = {{{Learning Bilinear Models of Actuated Koopman Generators from Partially-Observed Trajectories}}}, doi = {{10.1137/22M1523601}}, volume = {{23}}, year = {{2024}}, } @article{52620, abstract = {{Der Beitrag stellt ein Qualifizierungsformat für (multi)professionelle Bildungsakteur*innen zur entwicklungsförderlichen Nutzung von Selbstinszenierungspraktiken vor. Die Konzeption und Entwicklung des Weiterbildungsformats ist im Rahmen eines Forschungs- und Entwicklungs­projekts für Jugendliche in ausbildungsvorbereitenden Bildungsgängen angesiedelt, die einen besonderen Förderbedarf im Zuge des Übergangs von der Schule in die Berufs- und Arbeitswelt aufweisen. Diese sollen durch offene und kreative Selbstdarstellungs- und Erhebungsformate dabei unterstützt werden, ihre Stärken zu erkennen, zu dokumentieren und sichtbar zu machen, sowie hierüber gleichsam für den Übergang Schule-Beruf gestärkt werden.   Wir stellen zunächst den Projektrahmen vor und schärfen in diesem Kontext den Zugang über eine Grundlegung zu Selbstinszenierung sowie deren Potenziale im Kontext der inklusiven Berufsbildung und zur Stärkung der Zielgruppe. Das im Projekt entwickelte Rahmenkonzept bietet eine Orientierung zur standort- respektive bildungsgangbezogenen Anpassung und stellt damit Herausforderungen und einen entsprechenden Qualifizierungsbedarf für Bildungsakteur­*innen heraus. Darauf basierend stellen wir die konzeptionellen Grundlagen, die methodische und inhaltliche Ausgestaltung zum Ansatz der ‚Kollegialen Weiterbildung‘ zur entwicklungsför­derlichen Nutzung von Selbstinszenierungspraktiken vor und adressieren u. a. das Zusammen­spiel von innovativer Entwicklung, Schärfung von Rollen und Kompetenzentwicklung der Bil­dungsakteur*innen. Abschließend diskutieren wir die konzeptionellen Entwicklungen und den Implementations- und Transferansatz. Abstract The article presents a qualification format for multi-professional actors in the educational context on the developmental use of 'Selbstinszenierungspraktiken' (which means a combination of practices for self-awareness, self-realisation and self-accep­tance in a process which we are developing in our project). The concept and development of the further education format is located within the framework of a research and development project for young people with wide-ranging needs in pre-vocational education units at the transition from school to work. They will be supported in recognizing, documenting and showing their strengths through open and creative self-expression and survey formats, as well as being strengthened for the transition from school to work. First, we present the project framework and clarify the approach by a theoretical grounding of ‚Selbstinszenierung‘ (similar to a combination of self-awareness, self-realisation and self-accep­tance) as well as its potentials in the context of inclusive vocational education by strengthening the target group. The developed framework provides a basis for the adaptation of the concept to a specific location or educational programme and highlights challenges and qualification needs for actors in the educational context. We present the conceptual basis, the methodologi­cal and content-related design of the collegial training approach on the developmental use of 'Selbstinszenierungspraktiken'. We address the interaction of innovative development, cla­rification of roles and competence development of actors in the educational context. Finally, we discuss the conceptual developments and the implementation and transfer approach.}}, author = {{Kundisch, Heike and Kremer, H.-Hugo and Otto, Franziska}}, issn = {{2699-2477}}, journal = {{QfI - Qualifizierung für Inklusion. Online-Zeitschrift zur Forschung über Aus-, Fort- und Weiterbildung pädagogischer Fachkräfte}}, keywords = {{General Medicine}}, number = {{3}}, publisher = {{University Library J. C. Senckenberg}}, title = {{{Selbstinszenierungspraktiken als Weg zu Stärkenorientierung, Selbstbestimmung und Teilhabe – eine Kollegiale Weiterbildung für multiprofessionelle Akteursgruppen im (inklusiven) Übergang Schule-Beruf}}}, doi = {{10.21248/qfi.136}}, volume = {{5}}, year = {{2024}}, } @article{52652, author = {{Herdramm, Henrike}}, journal = {{BloKK. Der Blog des Zentrums für Komparative Theologie und Kulturwissenschaften}}, keywords = {{Ideologiekritik, Tiertheologie, Tierethik}}, title = {{{Das Potenzial von Ideologiekritik im Religionsunterricht}}}, year = {{2024}}, } @article{52700, abstract = {{We explore the polarization hysteretic behaviour and field-dependent permittivity of ferroelectric-dielectric 2D materials formed by random dispersions of low permittivity inclusions in a ferroelectric matrix, using finite element simulations. We show how the degree of impenetrability of dielectric inclusions plays a substantial role in controlling the coercive field, remnant and saturation polarizations of the homogenized materials. The results highlight the significance of the degree of impenetrability of inclusion in tuning the effective polarization properties of such ferroelectric composites: coercive field drops significantly as percolation threshold is attained and remnant polarization decreases faster than a linear decay.}}, author = {{Myroshnychenko, Viktor and Mulavarickal Jose, Pious Mathews and Farheen, Henna and Ejaz, Shafaq and Brosseau, Christian and Förstner, Jens}}, issn = {{0031-8949}}, journal = {{Physica Scripta}}, keywords = {{tet_topic_ferro}}, number = {{4}}, pages = {{045952}}, publisher = {{IOP Publishing}}, title = {{{From Swiss-cheese to discrete ferroelectric composites: assessing the ferroelectric butterfly shape in polarization loops}}}, doi = {{10.1088/1402-4896/ad3172}}, volume = {{99}}, year = {{2024}}, } @article{52702, abstract = {{The editorial introduces the special issue Knowledge by Design in Education: Key challenges and experiences from research practice, posing key questions, offering an insight into ongoing discussions, and presenting an overview of the included articles.}}, author = {{Brase, Alexa Kristin and Jenert, Tobias}}, issn = {{2511-0667}}, journal = {{EDeR. Educational Design Research}}, number = {{1}}, publisher = {{Staats- und Universitatsbibliothek Hamburg Carl von Ossietzky}}, title = {{{Knowledge by Design in Education}}}, doi = {{10.15460/eder.8.1.2213}}, volume = {{8}}, year = {{2024}}, } @article{52726, abstract = {{Heteroclinic structures organize global features of dynamical systems. We analyse whether heteroclinic structures can arise in network dynamics with higher-order interactions which describe the nonlinear interactions between three or more units. We find that while commonly analysed model equations such as network dynamics on undirected hypergraphs may be useful to describe local dynamics such as cluster synchronization, they give rise to obstructions that allow to design of heteroclinic structures in phase space. By contrast, directed hypergraphs break the homogeneity and lead to vector fields that support heteroclinic structures.}}, author = {{Bick, Christian and von der Gracht, Sören}}, issn = {{2051-1329}}, journal = {{Journal of Complex Networks}}, keywords = {{Applied Mathematics, Computational Mathematics, Control and Optimization, Management Science and Operations Research, Computer Networks and Communications}}, number = {{2}}, publisher = {{Oxford University Press (OUP)}}, title = {{{Heteroclinic dynamics in network dynamical systems with higher-order interactions}}}, doi = {{10.1093/comnet/cnae009}}, volume = {{12}}, year = {{2024}}, } @article{52372, abstract = {{Due to the hydrolytic instability of LiPF6 in carbonate-based solvents, HF is a typical impurity in Li-ion battery electrolytes. HF significantly influences the performance of Li-ion batteries, for example by impacting the formation of the solid electrolyte interphase at the anode and by affecting transition metal dissolution at the cathode. Additionally, HF complicates studying fundamental interfacial electrochemistry of Li-ion battery electrolytes, such as direct anion reduction, because it is electrocatalytically relatively unstable, resulting in LiF passivation layers. Methods to selectively remove ppm levels of HF from LiPF6-containing carbonate-based electrolytes are limited. We introduce and benchmark a simple yet efficient electrochemical in situ method to selectively remove ppm amounts of HF from LiPF6-containing carbonate-based electrolytes. The basic idea is the application of a suitable potential to a high surface-area metallic electrode upon which only HF reacts (electrocatalytically) while all other electrolyte components are unaffected under the respective conditions.}}, author = {{Ge, Xiaokun and Huck, Marten and Kuhlmann, Andreas and Tiemann, Michael and Weinberger, Christian and Xu, Xiaodan and Zhao, Zhenyu and Steinrueck, Hans-Georg}}, issn = {{0013-4651}}, journal = {{Journal of The Electrochemical Society}}, keywords = {{Materials Chemistry, Electrochemistry, Surfaces, Coatings and Films, Condensed Matter Physics, Renewable Energy, Sustainability and the Environment, Electronic, Optical and Magnetic Materials}}, pages = {{030552}}, publisher = {{The Electrochemical Society}}, title = {{{Electrochemical Removal of HF from Carbonate-based LiPF6-containing Li-ion Battery Electrolytes}}}, doi = {{10.1149/1945-7111/ad30d3}}, volume = {{171}}, year = {{2024}}, } @article{52958, author = {{Boeddeker, Christoph and Subramanian, Aswin Shanmugam and Wichern, Gordon and Haeb-Umbach, Reinhold and Le Roux, Jonathan}}, issn = {{2329-9290}}, journal = {{IEEE/ACM Transactions on Audio, Speech, and Language Processing}}, keywords = {{Electrical and Electronic Engineering, Acoustics and Ultrasonics, Computer Science (miscellaneous), Computational Mathematics}}, pages = {{1185--1197}}, publisher = {{Institute of Electrical and Electronics Engineers (IEEE)}}, title = {{{TS-SEP: Joint Diarization and Separation Conditioned on Estimated Speaker Embeddings}}}, doi = {{10.1109/taslp.2024.3350887}}, volume = {{32}}, year = {{2024}}, } @inproceedings{53069, author = {{Banh, Ngoc Chi and Scharlau, Ingrid}}, location = {{Regensburg}}, title = {{{Effects of task difficulty on visual processing speed}}}, year = {{2024}}, } @book{34544, abstract = {{Tax evasion, tax avoidance and tax resistance are widespread phenomena in political, economic, social and fiscal history from antiquity through medieval, early modern and modern times. Histories of Tax Evasion, Avoidance and Resistance shows how different groups and individuals around the globe have succeeded or failed in not paying their due taxes, whether in kind or in cash, on their properties or on their crops. It analyses how, throughout history, wealthy and poor taxpayers have tried to avoid or reduce their tax burden by negotiating with tax authorities, through practices of legal or illegal tax evasion, by filing lawsuits, seeking armed resistance or by migration, and how state authorities have dealt with such acts of claim making, defiance, open resistance or elusion. It fills an important research gap in tax history, addressing questions of tax morale and fairness, and how social and political inequality was negotiated through taxation. It gives rich insights into the development of citizen-state relationships throughout the course of history. The book comprises case studies from Ancient Athens, Roman Egypt, Medieval Europe, Early Modern Mexico, the Ottoman Empire, Nigeria under British colonial rule, the United Kingdom of the early 20th century, Greece during the Second World War, as well as West Germany, Switzerland, Sweden and the United States in the 20th century, including transnational entanglements in the world of late-modern offshore finance and taxation. The authors are experts in fiscal, economic, financial, legal, social and/or cultural history. The book is intended for students, researchers and scholars of economic and financial history, social and world history and political economy. The Open Access version of this book, available at www.taylorfrancis.com, has been made available under a Creative Commons Attribution-Share Alike 4.0 license.}}, author = {{Schönhärl, Korinna and Hürlimann, Gisela and Rohde, Dorothea}}, isbn = {{9781003333197}}, keywords = {{Tax History, Financial History}}, publisher = {{Routledge}}, title = {{{Histories of Tax Evasion, Avoidance and Resistance}}}, doi = {{10.4324/9781003333197}}, year = {{2023}}, } @inbook{34546, abstract = {{Jean Bodin's list on how the absolutist monarchical state could raise its revenue ranked taxation only in seventh place. From a modern legal perspective, taxes are compulsory transfers of resources that households and enterprises pay to one or several government bodies without receiving an individual, specific benefit in return. Historians have dealt with not paying taxes in various contexts, such as analysing tax resistance and tax resistance movements in history. Tax law is best understood as an outcome of long-term, often conflictual, negotiations and as an expression of specific political mentalities and ideologies. As a consequence, tax law and sometimes even the tax juridical system have a strongly politicised character. Loopholes in tax legislation that enable or facilitate avoidance or evasion can thus be regarded as a result of the interest-driven politics of parliamentary majorities, as the success of concerted lobby pressure.}}, author = {{Schönhärl, Korinna and Hürlimann, Gisela and Rohde, Dorothea}}, booktitle = {{Histories of Tax Evasion, Avoidance and Resistance }}, editor = {{Schönhärl, Korinna and Hürlimann, Gisela and Rohde, Dorothea}}, pages = {{1--15}}, publisher = {{Routledge}}, title = {{{ The Ability and Intention of Not Paying Taxes in History. Some Introductory Observations}}}, doi = {{10.4324/9781003333197}}, year = {{2023}}, } @inbook{34547, abstract = {{As a case study, this chapter examines two tax education films that were produced 11 years apart in the USA and Western Germany during and after World War II: “The New Spirit” and “Putzke wants to know”. In contrast to America's most popular cartoon character 11 years earlier, Erwin Putzke is in a terrible mood at the beginning of the short film “Putzke wants to know”. The family father and electrician with a workshop of his own is annoyed and upset by the duty of filling in his tax return, grumbling at his wife and daughter and even at their budgie. The film's tax morale message is conveyed to its audience against the backdrop of a sober post-war reality characterised by allied occupation and the Allies' say in West German tax policies during a period of laborious economic build-up after a lost war.}}, author = {{Schönhärl, Korinna}}, booktitle = {{Histories of Tax Evasion, Avoidance and Resistance}}, editor = {{Schönhärl, Korinna and Hürlimann, Gisela and Rohde, Dorothea}}, pages = {{154--167}}, publisher = {{Routledge}}, title = {{{ How to Create a Taxpaying Spirit. A Transnational Examination of an US American and a Western German Tax Education Film in and after World War II}}}, doi = {{10.4324/9781003333197}}, year = {{2023}}, } @article{21199, abstract = {{As in almost every other branch of science, the major advances in data science and machine learning have also resulted in significant improvements regarding the modeling and simulation of nonlinear dynamical systems. It is nowadays possible to make accurate medium to long-term predictions of highly complex systems such as the weather, the dynamics within a nuclear fusion reactor, of disease models or the stock market in a very efficient manner. In many cases, predictive methods are advertised to ultimately be useful for control, as the control of high-dimensional nonlinear systems is an engineering grand challenge with huge potential in areas such as clean and efficient energy production, or the development of advanced medical devices. However, the question of how to use a predictive model for control is often left unanswered due to the associated challenges, namely a significantly higher system complexity, the requirement of much larger data sets and an increased and often problem-specific modeling effort. To solve these issues, we present a universal framework (which we call QuaSiModO: Quantization-Simulation-Modeling-Optimization) to transform arbitrary predictive models into control systems and use them for feedback control. The advantages of our approach are a linear increase in data requirements with respect to the control dimension, performance guarantees that rely exclusively on the accuracy of the predictive model, and only little prior knowledge requirements in control theory to solve complex control problems. In particular the latter point is of key importance to enable a large number of researchers and practitioners to exploit the ever increasing capabilities of predictive models for control in a straight-forward and systematic fashion.}}, author = {{Peitz, Sebastian and Bieker, Katharina}}, journal = {{Automatica}}, publisher = {{Elsevier}}, title = {{{On the Universal Transformation of Data-Driven Models to Control Systems}}}, doi = {{10.1016/j.automatica.2022.110840}}, volume = {{149}}, year = {{2023}}, } @article{35831, abstract = {{Videografien eigenen Unterrichts sind ein mögliches methodisches Werkzeug zur Förderung der professionellen Kompetenz angehender Lehrkräfte, das allerdings innerhalb der Lehramtsausbildung noch nicht breit implementiert ist. Ein möglicher Grund hierfür könnte neben organisatorischen Herausforderungen auch in einer geringen Akzeptanz von Eigenvideografien durch Lehramtsstudierende liegen. Um besser abschätzen zu können, mit welchen Voraussetzungen affektiv-emotionaler Art bei einer breiteren Implementierung im Lehramtsstudium gerechnet werden kann, wurden N = 938 Lehramtsstudierende im Masterstudium an der Universität Paderborn zu ihren Emotionen und Bereitschaften zur Arbeit mit Eigenvideografien befragt. Dabei wurde auch erfasst, wie sich diese je nach bestehenden Erfahrungen zur Arbeit mit Videografien unterscheiden. In den Ergebnissen zeigen sich kaum affektiv-emotionale Reaktionen zur Eigenvideografie, und wenn, vor allem Gefühle der Unsicherheit. Zu beachten ist, dass zwar bei gut der Hälfte der Studierenden eine eher hohe generelle Bereitschaft zur Eigenvideografie besteht, eine konkrete Intention bzw. eine konkrete Volition zur Videografie aber geringer ist. Die ca. 10 % der Studierenden mit Eigenvideografieerfahrung im Studium zeigen erwartungsgemäß höhere Bereitschaften, aber unerwartet keine signifikant positiveren Emotionen. Insgesamt verdeutlichen die Ergebnisse, dass bzgl. der Akzeptanz der Studierenden ein höheres Potenzial zur Implementation von Eigenvideografien im Studium vorliegt, als aktuell ausgeschöpft wird.}}, author = {{Vogelsang, Christoph and Pollmeier, Pascal and Gockeln, Theresa and Rogge, Tim}}, journal = {{Zeitschrift für Bildungsforschung}}, keywords = {{Lehrerbildung, Videografie, Praxissemester, Emotionen, Akzeptanz}}, publisher = {{Springer}}, title = {{{Zu unangenehm, zu viel Aufwand oder keine Möglichkeit? – Emotionen und Bereitschaft von Lehramtsstudierenden zur Videografie eigenen Unterrichts}}}, doi = {{10.1007/s35834-022-00378-y}}, year = {{2023}}, } @article{36800, abstract = {{Abstract. The miniaturisation of components leads to new demands on measurement systems. One of these is the resolution. As a volumetric analysis method and method of non-destructive testing, industrial X-ray computed tomography (XCT) has the ability to measure geometrical features and their corresponding dimensions without destroying them and can therefore be used for quality assurance. However, the concept of resolution is not trivial for XCT and has not yet been finally clarified. In particular, the interface structural resolution, the detectability of two surfaces facing each other after surface segmentation, faces a lack of a test specimen, a corresponding measurand and a reliable method. Simulation-based XCT investigations of a method to determine this type of resolution are presented in this article using the geometry of a test specimen that contains several radially arranged holes of the same size. The borehole diameters correspond to the distance between the holes to investigate the resolvability of surfaces and interfaces. The evaluation is based on mean and extreme values of grey value profiles between the individual boreholes of the reconstructed volume. It is shown that the geometrical detectability of the test specimen surface and interface can be extended by a reasonable choice of the threshold value for surface segmentation within a defined interval. With regard to the resolving capability, a distinction is made between assured detectability and possible detectability, as well as the threshold value used when using the ISO50 threshold for surface segmentation and measurement chain completion. }}, author = {{Busch, Matthias and Hausotte, Tino}}, issn = {{2194-878X}}, journal = {{Journal of Sensors and Sensor Systems}}, keywords = {{Electrical and Electronic Engineering, Instrumentation}}, number = {{1}}, pages = {{1--8}}, publisher = {{Copernicus GmbH}}, title = {{{Simulation-based investigation of the metrological interface structural resolution capability of X-ray computed tomography scanners}}}, doi = {{10.5194/jsss-12-1-2023}}, volume = {{12}}, year = {{2023}}, } @inproceedings{35426, author = {{Richter, Cedric and Haltermann, Jan Frederik and Jakobs, Marie-Christine and Pauck, Felix and Schott, Stefan and Wehrheim, Heike}}, booktitle = {{37th IEEE/ACM International Conference on Automated Software Engineering}}, publisher = {{ACM}}, title = {{{Are Neural Bug Detectors Comparable to Software Developers on Variable Misuse Bugs?}}}, doi = {{10.1145/3551349.3561156}}, year = {{2023}}, } @inproceedings{35427, author = {{Pauck, Felix}}, booktitle = {{37th IEEE/ACM International Conference on Automated Software Engineering}}, publisher = {{ACM}}, title = {{{Scaling Arbitrary Android App Analyses}}}, doi = {{10.1145/3551349.3561339}}, year = {{2023}}, } @article{37613, abstract = {{Chemical phenomena are only observable on a macroscopic level, whereas they are explained by entities on a non-visible level. Students often demonstrate limited ability to link these different levels. Augmented reality (AR) offers the possibility to increase contiguity by embedding virtual models into hands-on experiments. Therefore, this paper presents a pre- and post-test study investigating how learning and cognitive load are influenced by AR during hands-on experiments. Three comparison groups (AR, animation and filmstrip), with a total of N = 104 German secondary school students, conducted and explained two hands-on experiments. Whereas the AR group was allowed to use an AR app showing virtual models of the processes on the submicroscopic level during the experiments, the two other groups were provided with the same dynamic or static models after experimenting. Results indicate no significant learning gain for the AR group in contrast to the two other groups. The perceived intrinsic cognitive load was higher for the AR group in both experiments as well as the extraneous load in the second experiment. It can be concluded that AR could not unleash its theoretically derived potential in the present study.}}, author = {{Peeters, Hendrik and Habig, Sebastian and Fechner, Sabine}}, issn = {{2414-4088}}, journal = {{Multimodal Technologies and Interaction}}, keywords = {{augmented reality, chemistry education, models, experiment, cognitive load}}, number = {{2}}, publisher = {{MDPI AG}}, title = {{{Does Augmented Reality Help to Understand Chemical Phenomena during Hands-On Experiments?–Implications for Cognitive Load and Learning}}}, doi = {{10.3390/mti7020009}}, volume = {{7}}, year = {{2023}}, } @phdthesis{37645, abstract = {{Für den Erwerb fachmethodischer Fähigkeiten stellen Laborpraktika eine zentrale Lerngelegenheiten des Physikstudiums dar. Trotz ihrer hohen Bedeutung fehlt ein hochschulfachdidaktischer Diskurs zu einer lehr-lerntheoretischen Fundierung. Zudem wird ihre Lernwirksamkeit aufgrund der bestehenden didaktischen Gestaltung kritisiert. Die weit verbreiteten engmaschigen Aufgabenstellungen enthalten keine Anreize zur tiefergehenden Auseinandersetzung mit den Inhalten. Um der Diskrepanz zwischen den Zielsetzungen und den von den Lernenden erworbenen Fähigkeiten entgegenzuwirken, liegen aktuell nur wenige und zudem nur punktuelle Grundlagen für eine evidenzbasierte Überarbeitung dieses Veranstaltungsformates vor. Ziel dieser Arbeit ist daher, einen Vorschlag für ein performanzorientiertes Kompetenzstrukturmodell auf universitärem Niveau zu entwickeln, das die Inhaltsbereiche, die experimentellen Fähigkeiten und Fertigkeiten sowie die Qualitätsausprägungen experimenteller Handlungen systematisiert.Die Modellierung ist auf Basis der Analyse videografierter experimenteller Performanz von 16 unterschiedlich fähigen Proband:innen realisiert worden. Für die Entwicklung der Dimensionen Fachmethodik und Qualitätsausprägung werden unter Nutzung der qualitativen Forschungsansätze Dokumentarische Methode und Typenbildung die charakteristischen Merkmale universitären Experimentierens identifiziert und anschließend systematisiert. Zur Prüfung der Passung des Modells zur Perspektive der Wissenschaft Physik ist ein Interrating mit einem Fachwissenschaftler durchgeführt worden, das sehr gute Übereinstimmungswerte liefert. Die Passung des Modells zur Perspektive der Praktikumsleiter:innen ist durch ein Expertenrating erfolgt. Ein Rangfolgen-Vergleich zeigt hohe Übereinstimmungswerte.}}, author = {{Bauer, Anna Brigitte}}, publisher = {{LibreCat University}}, title = {{{Experimentelle Kompetenz Physikstudierender}}}, doi = {{10.17619/UNIPB/1-1652}}, year = {{2023}}, } @unpublished{38031, abstract = {{We consider the data-driven approximation of the Koopman operator for stochastic differential equations on reproducing kernel Hilbert spaces (RKHS). Our focus is on the estimation error if the data are collected from long-term ergodic simulations. We derive both an exact expression for the variance of the kernel cross-covariance operator, measured in the Hilbert-Schmidt norm, and probabilistic bounds for the finite-data estimation error. Moreover, we derive a bound on the prediction error of observables in the RKHS using a finite Mercer series expansion. Further, assuming Koopman-invariance of the RKHS, we provide bounds on the full approximation error. Numerical experiments using the Ornstein-Uhlenbeck process illustrate our results.}}, author = {{Philipp, Friedrich and Schaller, Manuel and Worthmann, Karl and Peitz, Sebastian and Nüske, Feliks}}, booktitle = {{arXiv:2301.08637}}, title = {{{Error bounds for kernel-based approximations of the Koopman operator}}}, year = {{2023}}, } @inproceedings{36522, abstract = {{Jupyter notebooks enable developers to interleave code snippets with rich-text and in-line visualizations. Data scientists use Jupyter notebook as the de-facto standard for creating and sharing machine-learning based solutions, primarily written in Python. Recent studies have demonstrated, however, that a large portion of Jupyter notebooks available on public platforms are undocumented and lacks a narrative structure. This reduces the readability of these notebooks. To address this shortcoming, this paper presents HeaderGen, a novel tool-based approach that automatically annotates code cells with categorical markdown headers based on a taxonomy of machine-learning operations, and classifies and displays function calls according to this taxonomy. For this functionality to be realized, HeaderGen enhances an existing call graph analysis in PyCG. To improve precision, HeaderGen extends PyCG's analysis with support for handling external library code and flow-sensitivity. The former is realized by facilitating the resolution of function return-types. Furthermore, HeaderGen uses type information to perform pattern matching on code syntax to annotate code cells. The evaluation on 15 real-world Jupyter notebooks from Kaggle shows that HeaderGen's underlying call graph analysis yields high accuracy (96.4% precision and 95.9% recall). This is because HeaderGen can resolve return-types of external libraries where existing type inference tools such as pytype (by Google), pyright (by Microsoft), and Jedi fall short. The header generation has a precision of 82.2% and a recall rate of 96.8% with regard to headers created manually by experts. In a user study, HeaderGen helps participants finish comprehension and navigation tasks faster. All participants clearly perceive HeaderGen as useful to their task.}}, author = {{Shivarpatna Venkatesh, Ashwin Prasad and Wang, Jiawei and Li, Li and Bodden, Eric}}, keywords = {{static analysis, python, code comprehension, annotation, literate programming, jupyter notebook}}, publisher = {{IEEE SANER 2023 (International Conference on Software Analysis, Evolution and Reengineering)}}, title = {{{Enhancing Comprehension and Navigation in Jupyter Notebooks with Static Analysis}}}, doi = {{10.48550/ARXIV.2301.04419}}, year = {{2023}}, } @article{41874, author = {{Pfeiffer, Jella and Gutschow, Julia and Haas, Christian and Möslein, Florian and Maspfuhl, Oliver and Borgers, Frederik and Alpsancar, Suzana}}, issn = {{2363-7005}}, journal = {{Business & Information Systems Engineering}}, keywords = {{Information Systems}}, publisher = {{Springer Science and Business Media LLC}}, title = {{{Algorithmic Fairness in AI}}}, doi = {{10.1007/s12599-023-00787-x}}, year = {{2023}}, } @misc{41948, author = {{Süßmann, Johannes}}, booktitle = {{wissen/leben. Die Zeitung der WWU Münster}}, pages = {{6}}, title = {{{Zu »wahrer Glückseligkeit« anleiten. WWU-Gründervater Franz von Fürstenberg wollte vor allem den Fortbestand des Landes sichern – ein Gastbeitrag}}}, volume = {{17/1}}, year = {{2023}}, } @article{42154, author = {{Matthias Philipper}}, journal = {{Quick And Easy Journal Title}}, title = {{{New Quick And Easy Publication - Will be edited by LibreCat team}}}, year = {{2023}}, } @unpublished{42160, abstract = {{The goal of this paper is to make a strong point for the usage of dynamical models when using reinforcement learning (RL) for feedback control of dynamical systems governed by partial differential equations (PDEs). To breach the gap between the immense promises we see in RL and the applicability in complex engineering systems, the main challenges are the massive requirements in terms of the training data, as well as the lack of performance guarantees. We present a solution for the first issue using a data-driven surrogate model in the form of a convolutional LSTM with actuation. We demonstrate that learning an actuated model in parallel to training the RL agent significantly reduces the total amount of required data sampled from the real system. Furthermore, we show that iteratively updating the model is of major importance to avoid biases in the RL training. Detailed ablation studies reveal the most important ingredients of the modeling process. We use the chaotic Kuramoto-Sivashinsky equation do demonstarte our findings.}}, author = {{Werner, Stefan and Peitz, Sebastian}}, booktitle = {{arXiv:2302.07160}}, title = {{{Learning a model is paramount for sample efficiency in reinforcement learning control of PDEs}}}, year = {{2023}}, } @article{27426, abstract = {{Regularization is used in many different areas of optimization when solutions are sought which not only minimize a given function, but also possess a certain degree of regularity. Popular applications are image denoising, sparse regression and machine learning. Since the choice of the regularization parameter is crucial but often difficult, path-following methods are used to approximate the entire regularization path, i.e., the set of all possible solutions for all regularization parameters. Due to their nature, the development of these methods requires structural results about the regularization path. The goal of this article is to derive these results for the case of a smooth objective function which is penalized by a piecewise differentiable regularization term. We do this by treating regularization as a multiobjective optimization problem. Our results suggest that even in this general case, the regularization path is piecewise smooth. Moreover, our theory allows for a classification of the nonsmooth features that occur in between smooth parts. This is demonstrated in two applications, namely support-vector machines and exact penalty methods.}}, author = {{Gebken, Bennet and Bieker, Katharina and Peitz, Sebastian}}, journal = {{Journal of Global Optimization}}, number = {{3}}, pages = {{709--741}}, title = {{{On the structure of regularization paths for piecewise differentiable regularization terms}}}, doi = {{10.1007/s10898-022-01223-2}}, volume = {{85}}, year = {{2023}}, } @article{43018, author = {{Alhaddad, Samer and Förstner, Jens and Grynko, Yevgen}}, issn = {{0022-4073}}, journal = {{Journal of Quantitative Spectroscopy and Radiative Transfer}}, keywords = {{tet_topic_scattering}}, publisher = {{Elsevier BV}}, title = {{{Numerical study of light backscattering from layers of absorbing irregular particles larger than the wavelength}}}, doi = {{10.1016/j.jqsrt.2023.108557}}, volume = {{302}}, year = {{2023}}, } @inproceedings{31849, author = {{Hoffmann, Max and Biehler, Rolf}}, booktitle = {{Proceedings of the Fourth Conference of the International Network for Didactic Research in University Mathematics (INDRUM 2022, 19-22 October 2022)}}, editor = {{Trigueros, Marı́a and Barquero, Berta and Hochmuth, Reinhard and Peters, Jana}}, keywords = {{Teaching and learning of specific topics in university mathematics, Transition to, across and from university mathematics, Student Teachers, Geometry, Congruence, Double Discontinuity.}}, publisher = {{University of Hannover and INDRUM.}}, title = {{{Student Teachers ’ Knowledge of Congruence before a University Course on Geometry}}}, year = {{2023}}, } @inproceedings{43097, author = {{Florensa, Ignasio and Hoffmann, Max and Romo Vázquez, Avenilde and Zandieh, Michelle and Martínez-Planell, Rafael}}, booktitle = {{Proceedings of the Fourth Conference of the International Network for Didactic Research in University Mathematics (INDRUM 2022, 19-22 October 2022)}}, editor = {{Trigueros, Marı́a and Barquero, Berta and Hochmuth, Reinhard and Peters, Jana}}, title = {{{Innovations in university teaching based on mathematic education research}}}, year = {{2023}}, } @misc{43186, author = {{Süßmann, Johannes}}, title = {{{Pantheon}}}, year = {{2023}}, } @article{43464, abstract = {{Lightweight design is a common approach to reduce energy demand in the use stage of vehicles. The production of lightweight materials is usually associated with an increase in energy demand, so the environmental impacts of lightweight structures need to be assessed holistically using a life cycle assessment. To estimate the life cycle environmental impacts of a product in its developmental stage, for example, by life cycle engineering, future changes in relevant influencing factors must be considered. Prospective life cycle assessment provides methods for integrating future scenarios into life cycle assessment studies. However, approaches for integrating prospective life cycle assessment into product development are limited. The objective of this work is to provide the methodological foundation for integrating future scenarios of relevant influencing factors in the development of lightweight structures. The applicability of the novel methodology is demonstrated by a case study of a structural component in a steel, aluminium, and hybrid design. The results show that appropriate decarbonisation measures can reduce the life cycle greenhouse gas emissions by up to 95 percent until 2050. We also found that shifts in the environmentally optimal design are possible in future scenarios. Therefore, the methodology and data provided contribute to improved decision-making in product development.}}, author = {{Ostermann, Moritz and Grenz, Julian and Triebus, Marcel and Cerdas, Felipe and Marten, Thorsten and Tröster, Thomas and Herrmann, Christoph}}, issn = {{1996-1073}}, journal = {{Energies}}, keywords = {{Life Cycle Engineering, Life Cycle Assessment, Lightweight Design, Prospective LCA, Future-oriented LCA, Energy System, Material production, Sustainable production}}, number = {{8}}, publisher = {{MDPI AG}}, title = {{{Integrating Prospective Scenarios in Life Cycle Engineering: Case Study of Lightweight Structures}}}, doi = {{10.3390/en16083371}}, volume = {{16}}, year = {{2023}}, } @article{44058, abstract = {{A relatively small body of research has been conducted on the near- and long-term effects of study abroad (SA) to date. This existing research suggests that SA effects on language skills tend to be volatile, while the impact on various aspects of learners’ personal, academic, and professional development may be longer-lasting. Yet, learner perspectives on the dynamics and durability of such effects, in particular in the context of short-term SA programs, remain largely unexplored. This study hence investigates the near-term impact of short-term SA programs as experienced by students within the first months and years following their sojourns. A qualitative case-study design is employed to examine the accounts of four American students of German, who studied abroad in Austria for four weeks and were interviewed repeatedly over a period of up to 40 months after their sojourns. The results suggest that, from the students’ perspective, many effects deteriorate in the near term, although the overall sojourn experience still appears influential. Abstract in German Nur wenige Forschungsvorhaben haben sich bislang den mittel- bis langfristigen Auswirkungen studentischer Auslandsaufenthalte gewidmet; die bisherige Datenlage deutet jedoch darauf hin, dass die Auswirkungen auf sprachliche Kompetenzen eher unbeständig sind, wohingegen die persönliche, studiums- und berufsbezogene Entwicklung der Lernenden länger von einem Auslandsaufenthalt beeinflusst wird. Die Dynamik und Beständigkeit derartiger Auswirkungen wurden jedoch kaum mit Blick auf kurze Auslandsaufenthalte (≤ acht Wochen) sowie aus der Perspektive der Studierenden erforscht, was die vorliegende Studie insbesondere hinsichtlich mittelfristiger Effekte fokussiert. Mittels eines qualitativen Fallstudiendesigns werden die Interviewdaten vier amerikanischer Deutschlernender untersucht, die sich vier Wochen in Österreich aufhielten und in einem Zeitraum von bis zu 40 Monaten nach ihrem Aufenthalt wiederholt befragt wurden. Die Ergebnisse zeigen, dass viele Auswirkungen eines solchen Aufenthalts aus studentischer Perspektive mittelfristig verblassen, auch wenn der Auslandsaufenthalt im Gesamten weiterhin als einflussreiche Erfahrung wahrgenommen wird.}}, author = {{Müller, Mareike}}, issn = {{2380-8144}}, journal = {{Frontiers: The Interdisciplinary Journal of Study Abroad}}, number = {{1}}, pages = {{275--304}}, publisher = {{The Forum on Education Abroad}}, title = {{{Near-Term Effects of Short-Term Study Abroad: A Longitudinal Examination of Learner Perceptions}}}, doi = {{10.36366/frontiers.v35i1.684}}, volume = {{35}}, year = {{2023}}, } @article{42252, abstract = {{Die Wirtschaftlichkeit von Wärmemotoren wird maßgeblich durch die Rückführung von Wärme in Rekuperatoren beeinflusst. Beim isobaren Expansionsmotor vom Bush-Typ, einem Wärmemotor, welcher bereits mit Wärmequellen ab 60°C betrieben werden kann, steigt der thermische Wirkungsgrad durch den Einsatz von Rekuperatoren signifikant. Gleichzeitig wirken sich das Fluidvolumen des Wärmeübertragers sowie der beim Betrieb auftretende Druckverlust negativ auf den thermischen Wirkungsrad aus. In dieser Arbeit wird der Zusammenhang von Totvolumen, Druckverlust und Wärmerückgewinnung untersucht und Empfehlungen für den Betrieb von Rekuperatoren am isobaren Expansionsmotor gegeben.}}, author = {{Mügge, Nils and Kronberg, Alexander and Glushenkov, Maxim and Kenig, Eugeny Y.}}, journal = {{Chemie Ingenieur Technik}}, keywords = {{Isobarer Expansionsmotor, Dynamische Wärmeübertragungsmodellierung, Phasenwechsel, dichte Arbeitsmedien}}, number = {{5}}, publisher = {{Wiley}}, title = {{{Untersuchung überlagerter Effekte von Druckverlust und Totvolumen durch Rekuperation am isobaren Expansionsmotor}}}, doi = {{10.1002/cite.202200243}}, volume = {{95}}, year = {{2023}}, } @article{36983, abstract = {{AbstractThe use of structured measuring systems to prevent wall slip is a common approach to obtain absolute rheological values. Typically, only the minimum distance between the measuring surfaces is used for further calculation, implying that no flow occurs between the structural elements. But this assumption is misleading, and a gap correction is necessary. To determine the radius correction $$\Delta r$$ Δ r for specific geometries, we conducted investigations on three Newtonian fluids (two silicon oils and one suspension considered to be Newtonian in the relevant shear rate range). The results show that $$\Delta r$$ Δ r is not only shear- and material-independent, but geometry-dependent, providing a Newtonian flow behaviour in a similar viscosity range. Therefore, a correction value can be determined with only minute deviations in different Newtonian fluids. As the conducted laboratory measurements are very time-consuming and expensive, a CFD-approach with only very small deviations was additionally developed and compared for validation purposes. Therefore, simulation is an effective and resource-efficient alternative to the presented laboratory measurements to determine $$\Delta r$$ Δ r for the correction of structured coaxial geometries even for non-Newtonian fluids in the future.}}, author = {{Josch, Sebastian and Jesinghausen, Steffen and Dechert, Christopher and Schmid, Hans-Joachim}}, issn = {{0035-4511}}, journal = {{Rheologica Acta}}, keywords = {{rheology, rheometry, suspension, coaxial, correction}}, publisher = {{Springer Science and Business Media LLC}}, title = {{{Experimental and simulative determination and correction of the effective gap extension in structured coaxial measuring systems}}}, doi = {{10.1007/s00397-023-01383-2}}, year = {{2023}}, } @inproceedings{30125, abstract = {{We present an approach for guaranteed constraint satisfaction by means of data-based optimal control, where the model is unknown and has to be obtained from measurement data. To this end, we utilize the Koopman framework and an eDMD-based bilinear surrogate modeling approach for control systems to show an error bound on predicted observables, i.e., functions of the state. This result is then applied to the constraints of the optimal control problem to show that satisfaction of tightened constraints in the purely data-based surrogate model implies constraint satisfaction for the original system.}}, author = {{Schaller, Manuel and Worthmann, Karl and Philipp, Friedrich and Peitz, Sebastian and Nüske, Feliks}}, booktitle = {{IFAC-PapersOnLine}}, number = {{1}}, pages = {{169--174}}, title = {{{Towards reliable data-based optimal and predictive control using extended DMD}}}, doi = {{10.1016/j.ifacol.2023.02.029}}, volume = {{56}}, year = {{2023}}, } @article{43094, abstract = {{}}, author = {{Heck, Tamara and Steinhardt, Isabel and Rahal, Rima-Maria and Schubotz, Moritz and Scholl, Dominik and Behrens, Sarah}}, issn = {{2367-7163}}, journal = {{Research Ideas and Outcomes}}, keywords = {{Open Science}}, publisher = {{Pensoft Publishers}}, title = {{{Bootstrapping the Open Science culture: The fellowship approach}}}, doi = {{10.3897/rio.9.e103675}}, volume = {{9}}, year = {{2023}}, } @proceedings{35062, editor = {{Meine, Sabine and Otto, Arnold and Süßmann, Johannes}}, isbn = {{978-3-8260-7218-5}}, publisher = {{Königshausen & Neumann}}, title = {{{Musiklandschaften zwischen Rhein und Weser. Pluralisierung und Verflechtung entlang des Hellwegs in der Frühen Neuzeit. Unter Mitarbeit v. Markus Lauert}}}, doi = {{https://doi.org/10.36202/9783826077920}}, volume = {{13}}, year = {{2023}}, } @article{43245, abstract = {{High-contrast slab waveguide Bragg gratings with 1D periodicity are investigated. For specific oblique excitation by semi-guided waves at sufficiently high angles of incidence, the idealized structures do not exhibit any radiative losses, such that reflectance and transmittance for the single port mode add strictly up to one. We consider a series of symmetric, fully and partly etched finite gratings, for parameters found in integrated silicon photonics. These can act as spectral filters with a reasonably flattop response. Apodization can lead to more box shaped reflectance and transmittance spectra. Together with a narrowband Fabry–Perot filter, these configurations are characterized by reflection bands, or transmittance peaks, with widths that span three orders of magnitude.}}, author = {{Hammer, Manfred and Farheen, Henna and Förstner, Jens}}, issn = {{0740-3224}}, journal = {{Journal of the Optical Society of America B}}, keywords = {{tet_topic_waveguide}}, number = {{4}}, pages = {{862}}, publisher = {{Optica Publishing Group}}, title = {{{How to suppress radiative losses in high-contrast integrated Bragg gratings}}}, doi = {{10.1364/josab.485725}}, volume = {{40}}, year = {{2023}}, } @unpublished{43132, author = {{Meier, Torsten and Grisard, S. and Trifonov, A.V. and Rose, Hendrik and Reichhardt, R. and Reichelt, Matthias and Schneider, C. and Kamp, M. and Höfling, S. and Bayer, M. and Akimov, I.A}}, booktitle = {{arxiv:2302.02480}}, title = {{{Temporal sorting of optical multi-wave-mixing processes in semiconductor quantum dots}}}, year = {{2023}}, } @article{44097, abstract = {{We present strong enhancement of third harmonic generation in an amorphous silicon metasurface consisting of elliptical nano resonators. We show that this enhancement originates from a new type of multi-mode Fano mechanism. These ‘Super-Fano’ resonances are investigated numerically in great detail using full-wave simulations. The theoretically predicted behavior of the metasurface is experimentally verified by linear and nonlinear transmission spectroscopy. Moreover, quantitative nonlinear measurements are performed, in which an absolute conversion efficiency as high as ηmax ≈ 2.8 × 10−7 a peak power intensity of 1.2 GW cm−2 is found. Compared to an unpatterned silicon film of the same thickness amplification factors of up to ~900 are demonstrated. Our results pave the way to exploiting a strong Fano-type multi-mode coupling in metasurfaces for high THG in potential applications.}}, author = {{Hähnel, David and Golla, Christian and Albert, Maximilian and Zentgraf, Thomas and Myroshnychenko, Viktor and Förstner, Jens and Meier, Cedrik}}, issn = {{2047-7538}}, journal = {{Light: Science & Applications}}, keywords = {{tet_topic_meta}}, number = {{1}}, pages = {{97}}, publisher = {{Springer Nature}}, title = {{{A multi-mode super-fano mechanism for enhanced third harmonic generation in silicon metasurfaces}}}, doi = {{https://doi.org/10.1038/s41377-023-01134-1}}, volume = {{12}}, year = {{2023}}, } @book{44083, author = {{Bauer, Anna Brigitte}}, isbn = {{978-3-8325-5625-9}}, publisher = {{Logos Verlag Berlin GmbH}}, title = {{{Experimentelle Kompetenz Physikstudierender. Entwicklung und erste Erprobung eines performanzorientierten Kompetenzstrukturmodells unter Nutzung qualitativer Methoden}}}, doi = {{10.30819/5625}}, volume = {{352}}, year = {{2023}}, } @misc{43374, author = {{Schürmann, Patrick}}, title = {{{ A Formal Comparison of Advanced Digital Signature Primitives}}}, year = {{2023}}, } @article{42515, abstract = {{ Microcellular wood fiber reinforced polymers offer the possibility to reduce the use of fossil raw materials. In particular, thick-walled structures with thicknesses greater than 6 mm offer a high potential for weight savings. This study investigates the cell structures and mechanical properties of injection-molded test specimens. The influence of different thicknesses (6–10 mm) along with different chemical blowing agents (endothermic, exothermic) with varying dosages (0–2 wt%) is analyzed. The investigations reveal that exothermic chemical blowing agents form finer cells consistently to thin-walled structures than endothermic ones. Higher foaming agent content leads to higher pore fractions, with many small cells coalescing into a large open-pore cell network. The mechanical properties depend mainly on the pore content of the sample. The specific tensile properties deteriorate with the use of chemical blowing agents (CFA), whereas the sandwich structure produced with compact edge layers has a positive influence on the specific flexural properties. }}, author = {{Moritzer, Elmar and Flachmann, Felix}}, issn = {{0021-955X}}, journal = {{Journal of Cellular Plastics}}, keywords = {{Materials Chemistry, Polymers and Plastics, General Chemistry}}, number = {{3}}, pages = {{187--199}}, publisher = {{SAGE Publications}}, title = {{{Morphological and mechanical properties of foamed thick-walled Wood-Plastic-Composite structures}}}, doi = {{10.1177/0021955x231161175}}, volume = {{59}}, year = {{2023}}, } @article{42179, author = {{Burmeister, Sascha Christian and Schryen, Guido}}, journal = {{Energy Systems}}, publisher = {{Springer}}, title = {{{Distribution Network Optimization: Predicting computation times to design scenario analysis for network operators}}}, doi = {{10.1007/s12667-023-00572-5}}, year = {{2023}}, } @article{43034, abstract = {{Abstract The accessibility to rheological parameters for concrete is becoming more and more relevant. This is mainly related to the constantly emerging challenges, such as not only the development of high-strength concretes is progressing very fast but also the simulation of the flow behaviour is of high importance. The main problem, however, is that the rheological characterisation of fresh concrete is not possible via commercial rheometers. The so-called concrete rheometers provide valuable relative values for comparing different concretes, but they cannot measure absolute values. Therefore, we developed an adaptive coaxial concrete rheometer (ACCR) that allows the measurement of fresh concrete with particles up to d max = 5.5 mm {d}_{{\rm{\max }}}=5.5\hspace{.5em}{\rm{mm}} . The comparison of the ACCR with a commercial rheometer showed very good agreement for selected test materials (Newtonian fluid, shear thinning fluid, suspension, and yield stress fluid), so that self-compacting concrete was subsequently measured. Since these measurements showed a very high reproducibility, the rheological properties of the fresh concrete could be determined with high accuracy. The common flow models (Bingham (B), Herschel–Bulkley, modified Bingham (MB) models) were also tested for their applicability, with the Bingham and the modified Bingham model proving to be the best suitable ones.}}, author = {{Josch, Sebastian and Jesinghausen, Steffen and Schmid, Hans-Joachim}}, issn = {{1617-8106}}, journal = {{Applied Rheology}}, keywords = {{Condensed Matter Physics, General Materials Science}}, number = {{1}}, publisher = {{Walter de Gruyter GmbH}}, title = {{{Development of an adaptive coaxial concrete rheometer and rheological characterisation of fresh concrete}}}, doi = {{10.1515/arh-2022-0140}}, volume = {{33}}, year = {{2023}}, } @inbook{44249, abstract = {{State education in honest tax payment can be understood as a facet of training in citizenship, i.e. as an attempt by the modern state to standardize the behavior of its citizens and to prevent deviations. Based on this Foucauldian understanding, this exploratory article examines tax education in the United States, Spain, and West Germany from the mid-1940s to the late 1980s. During this period, the USA asserted itself as the champion of tax education and Spain consistently tried to emulate this example, albeit with more modest means and different semantic strategies from as early as the 1960s, when it was still under a autoritarian regime. The FRG, however, completely discontinued its few early attempts at tax education from the mid-1950s onwards. Even during the economic crises and tax scandals of the 1970s, there was no relaunch of the programs. The article locates the reasons for this highly uneven development in the different ideal images of the citizen in the three states.}}, author = {{Schönhärl, Korinna and Düll, Nasrin and Ramírez Lugo , Nadya Melina}}, booktitle = {{Tax Evasion and Tax Havens since the Nineteenth Century }}, editor = {{Sébastien, Guex and Hadrien, Buclin}}, pages = {{355--376}}, publisher = {{Springer}}, title = {{{Tax Education After WWII: How Spain, the USA, and West Germany Tried to Make Their Citizens Pay Honestly}}}, year = {{2023}}, } @article{44321, author = {{Neumann, Phillip}}, issn = {{0513-9066}}, journal = {{Zeitschrift für Heilpädagogik}}, keywords = {{Inklusion, Sonderpädagogik, Bildung, Bildungsstudien, Integration}}, number = {{5}}, pages = {{230--232}}, title = {{{Studien zu Schulleistungen und ihre Aufbereitung}}}, volume = {{74}}, year = {{2023}}, } @inbook{35063, author = {{Meine, Sabine and Otto, Arnold and Süßmann, Johannes}}, booktitle = {{Musiklandschaften zwischen Rhein und Weser. Pluralisierung und Verflechtung entlang des Hellwegs in der Frühen Neuzeit. Unter Mitarbeit v. Markus Lauert}}, isbn = {{978-3-8260-7218-5}}, pages = {{7–42}}, publisher = {{Königshausen & Neumann}}, title = {{{Musiklandschaften zwischen Rhein und Weser – Einführung}}}, doi = {{https://doi.org/10.36202/9783826077920}}, year = {{2023}}, } @inproceedings{20841, author = {{Gharibian, Sevag and Watson, James and Bausch, Johannes}}, booktitle = {{Proceedings of the 40th International Symposium on Theoretical Aspects of Computer Science (STACS)}}, pages = {{54:1--54:21}}, title = {{{The Complexity of Translationally Invariant Problems beyond Ground State Energies}}}, doi = {{https://doi.org/10.4230/LIPIcs.STACS.2023.54}}, volume = {{254}}, year = {{2023}}, } @unpublished{44512, abstract = {{For open world applications, deep neural networks (DNNs) need to be aware of previously unseen data and adaptable to evolving environments. Furthermore, it is desirable to detect and learn novel classes which are not included in the DNNs underlying set of semantic classes in an unsupervised fashion. The method proposed in this article builds upon anomaly detection to retrieve out-of-distribution (OoD) data as candidates for new classes. We thereafter extend the DNN by $k$ empty classes and fine-tune it on the OoD data samples. To this end, we introduce two loss functions, which 1) entice the DNN to assign OoD samples to the empty classes and 2) to minimize the inner-class feature distances between them. Thus, instead of ground truth which contains labels for the different novel classes, the DNN obtains a single OoD label together with a distance matrix, which is computed in advance. We perform several experiments for image classification and semantic segmentation, which demonstrate that a DNN can extend its own semantic space by multiple classes without having access to ground truth.}}, author = {{Uhlemeyer, Svenja and Lienen, Julian and Hüllermeier, Eyke and Gottschalk, Hanno}}, booktitle = {{arXiv:2305.00983}}, title = {{{Detecting Novelties with Empty Classes}}}, year = {{2023}}, } @article{44672, abstract = {{With enhancing digitalization, condition monitoring is used in an increasing number of application fields across various industrial sectors. By its application, increased reliability as well as reduced risks and costs can be achieved. Based on different approaches, technical systems are monitored and measured data is analyzed to enable condition-based or predictive maintenance. To this end, machine learning approaches are usually implemented to diagnose the health states or predict the health index of the monitored system. However, these trained models are often black-box models, not intuitively explainable for a human. To overcome this shortcoming, a model-based approach based on physics is developed for piezoelectric bending actuators. Such a model enables a transparent representation of the system. Moreover, the model-based approach is extended by a parameter-estimation to account for sudden changes in behavior e. g. caused by occurring cracks.}}, author = {{Bender, Amelie}}, issn = {{0924-4247}}, journal = {{Sensors and Actuators A: Physical}}, keywords = {{Condition Monitoring, Model-based approach Diagnostics, Varying conditions, Explainability, Piezoelectric bending actuators}}, publisher = {{Elsevier BV}}, title = {{{Model-based condition monitoring of piezoelectric bending actuators}}}, doi = {{10.1016/j.sna.2023.114399}}, volume = {{357}}, year = {{2023}}, } @inproceedings{44194, author = {{Ahmed, Qazi Arbab and Awais, Muhammad and Platzner, Marco}}, booktitle = {{The 24th International Symposium on Quality Electronic Design (ISQED'23), San Francisco, Califorina USA}}, location = {{San Fransico CA 94023-0607, USA}}, title = {{{MAAS: Hiding Trojans in Approximate Circuits}}}, year = {{2023}}, } @article{44044, abstract = {{Dispersion is present in every optical setup and is often an undesired effect, especially in nonlinear-optical experiments where ultrashort laser pulses are needed. Typically, bulky pulse compressors consisting of gratings or prisms are used to address this issue by precompensating the dispersion of the optical components. However, these devices are only able to compensate for a part of the dispersion (second-order dispersion). Here, we present a compact pulse-shaping device that uses plasmonic metasurfaces to apply an arbitrarily designed spectral phase delay allowing for a full dispersion control. Furthermore, with specific phase encodings, this device can be used to temporally reshape the incident laser pulses into more complex pulse forms such as a double pulse. We verify the performance of our device by using an SHG-FROG measurement setup together with a retrieval algorithm to extract the dispersion that our device applies to an incident laser pulse.}}, author = {{Geromel, René and Georgi, Philip and Protte, Maximilian and Lei, Shiwei and Bartley, Tim and Huang, Lingling and Zentgraf, Thomas}}, issn = {{1530-6984}}, journal = {{Nano Letters}}, keywords = {{Mechanical Engineering, Condensed Matter Physics, General Materials Science, General Chemistry, Bioengineering}}, number = {{8}}, pages = {{3196 -- 3201}}, publisher = {{American Chemical Society (ACS)}}, title = {{{Compact Metasurface-Based Optical Pulse-Shaping Device}}}, doi = {{10.1021/acs.nanolett.2c04980}}, volume = {{23}}, year = {{2023}}, } @article{44837, abstract = {{Hydrothermal carbonization (HTC) is an efficient thermochemical method for the conversion of organic feedstock to carbonaceous solids. HTC of different saccharides is known to produce microspheres (MS) with mostly Gaussian size distribution, which are utilized as functional materials in various applications, both as pristine MS and as a precursor for hard carbon MS. Although the average size of the MS can be influenced by adjusting the process parameters, there is no reliable mechanism to affect their size distribution. Our results demonstrate that HTC of trehalose, in contrast to other saccharides, results in a distinctly bimodal sphere diameter distribution consisting of small spheres with diameters of (2.1 ± 0.2) μm and of large spheres with diameters of (10.4 ± 2.6) μm. Remarkably, after pyrolytic post-carbonization at 1000 °C the MS develop a multimodal pore size distribution with abundant macropores > 100 nm, mesopores > 10 nm and micropores < 2 nm, which were examined by small-angle X-ray scattering and visualized by charge-compensated helium ion microscopy. The bimodal size distribution and hierarchical porosity provide an extraordinary set of properties and potential variables for the tailored synthesis of hierarchical porous carbons, making trehalose-derived hard carbon MS a highly promising material for applications in catalysis, filtration, and energy storage devices.}}, author = {{Wortmann, Martin and Keil, Waldemar and Diestelhorst, Elise and Westphal, Michael and Haverkamp, René and Brockhagen, Bennet and Biedinger, Jan and Bondzio, Laila and Weinberger, Christian and Baier, Dominik and Tiemann, Michael and Hütten, Andreas and Hellweg, Thomas and Reiss, Günter and Schmidt, Claudia and Sattler, Klaus and Frese, Natalie}}, issn = {{2046-2069}}, journal = {{RSC Advances}}, keywords = {{General Chemical Engineering, General Chemistry}}, number = {{21}}, pages = {{14181--14189}}, publisher = {{Royal Society of Chemistry (RSC)}}, title = {{{Hard carbon microspheres with bimodal size distribution and hierarchical porosity via hydrothermal carbonization of trehalose}}}, doi = {{10.1039/d3ra01301d}}, volume = {{13}}, year = {{2023}}, } @inproceedings{45205, author = {{Dreiling, Dmitrij and Itner, Dominik and Hetkämper, Tim and Birk, Carolin and Gravenkamp, Hauke and Henning, Bernd}}, booktitle = {{SMSI 2023 Conference}}, isbn = {{978-3-9819376-8-8}}, location = {{Nürnberg}}, pages = {{394 -- 395}}, publisher = {{AMA Association For Sensors And Measurement}}, title = {{{Improved determination of viscoelastic material parameters using a pulse-echo measurement setup}}}, doi = {{10.5162/SMSI2023/P59}}, year = {{2023}}, } @misc{43375, author = {{Koch, Angelina}}, title = {{{Privacy-Preserving Collection and Evaluation of Log Files}}}, year = {{2023}}, } @article{44361, author = {{Schryen, Guido and Sperling, Martina}}, journal = {{Computers & Operations Research}}, number = {{September}}, title = {{{Literature Reviews in Operations Research: A New Taxonomy and a Meta Review}}}, volume = {{157}}, year = {{2023}}, } @article{45596, abstract = {{Dielectric metasurfaces provide a unique platform for efficient harmonic generation and optical wavefront manipulation at the nanoscale. Tailoring phase and amplitude of a nonlinearly generated wave with a high emission efficiency using resonance-based metasurfaces is a challenging task that often requires state-of-the-art numerical methods. Here, we propose a simple yet effective approach combining a sampling method with a Monte Carlo approach to design the third-harmonic wavefront generated by all-dielectric metasurfaces composed of elliptical silicon nanodisks. Using this approach, we theoretically demonstrate the full nonlinear 2π phase control with a uniform and highest possible amplitude in the considered parameter space, allowing us to design metasurfaces operating as third harmonic beam deflectors capable of steering light into a desired direction with high emission efficiency. The TH beam deflection with a record calculated average conversion efficiency of 1.2 × 10–1 W–2 is achieved. We anticipate that the proposed approach will be widely applied as alternative to commonly used optimization algorithms with higher complexity and implementation effort for the design of metasurfaces with other holographic functionalities.}}, author = {{Hähnel, David and Förstner, Jens and Myroshnychenko, Viktor}}, issn = {{2330-4022}}, journal = {{ACS Photonics}}, keywords = {{tet_topic_meta}}, publisher = {{American Chemical Society (ACS)}}, title = {{{Efficient Modeling and Tailoring of Nonlinear Wavefronts in Dielectric Metasurfaces}}}, doi = {{10.1021/acsphotonics.2c01967}}, year = {{2023}}, } @inbook{45606, author = {{Freymuth, Nina}}, booktitle = {{Diskriminierungsprozesse und Teilhabeperspektiven - Herausforderungen für die Praxis der Inklusion. Ausgewählte Master-Thesen 2018-2022 des Masterstudiengangs "Soziale Inklusion: Gesundheit und Bildung" der Evangelischen Hochschule Rheinland-Westfalen-Lippe}}, editor = {{Balz, HHans-Jürgen and Huneke, Annika and Kuhlmann, Carola and Römisch, Kathrin}}, pages = {{22--33}}, title = {{{Alternative für alle? Inklusionsspezifische Analyse der AfD und ihrer Wähler*innen}}}, year = {{2023}}, } @article{44383, author = {{Dieter, Peter and Caron, Matthew and Schryen, Guido}}, journal = {{European Journal of Operational Research (EJOR)}}, number = {{1}}, pages = {{283--300}}, title = {{{Integrating driver behavior into last-mile delivery routing: Combining machine learning and optimization in a hybrid decision support framework}}}, doi = {{https://doi.org/10.1016/j.ejor.2023.04.043}}, volume = {{311}}, year = {{2023}}, } @article{45672, author = {{Meier, Jana and Janzen, Thomas and Wotschel, Philipp and Vogelsang, Christoph}}, journal = {{die hochschullehre}}, publisher = {{wbv}}, title = {{{Rollenspielbasierte Simulationen als Übungs- und Prüfungsformate im Lehramtsstudium. Eine explorative Studie zu Erfahrungen und Einschätzungen aus Studierendensicht.}}}, doi = {{10.3278/HSL2307W}}, volume = {{9}}, year = {{2023}}, } @inproceedings{45695, author = {{Hotegni, Sedjro Salomon and Mahabadi, Sepideh and Vakilian, Ali}}, booktitle = {{Proceedings of the 40th International Conference on Machine Learning, Honolulu, Hawaii, USA. PMLR 202, 2023.}}, keywords = {{Fair range clustering}}, location = {{Honolulu, Hawaii, USA}}, title = {{{Approximation Algorithms for Fair Range Clustering}}}, year = {{2023}}, } @inproceedings{43060, author = {{Hebrok, Sven Niclas and Nachtigall, Simon and Maehren, Marcel and Erinola, Nurullah and Merget, Robert and Somorovsky, Juraj and Schwenk, Jörg}}, booktitle = {{32nd USENIX Security Symposium}}, title = {{{We Really Need to Talk About Session Tickets: A Large-Scale Analysis of Cryptographic Dangers with TLS Session Tickets}}}, year = {{2023}}, } @article{44116, abstract = {{Faradaic reactions including charge transfer are often accompanied with diffusion limitation inside the bulk. Conductive two-dimensional frameworks (2D MOFs) with a fast ion transport can combine both - charge transfer and fast diffusion inside their porous structure. To study remaining diffusion limitations caused by particle morphology, different synthesis routes of Cu-2,3,6,7,10,11-hexahydroxytriphenylene (Cu3(HHTP)2), a copper-based 2D MOF, are used to obtain flake- and rod-like MOF particles. Both morphologies are systematically characterized and evaluated for redox-active Li+ ion storage. The redox mechanism is investigated by means of X-ray absorption spectroscopy, FTIR spectroscopy and in situ XRD. Both types are compared regarding kinetic properties for Li+ ion storage via cyclic voltammetry and impedance spectroscopy. A significant influence of particle morphology for 2D MOFs on kinetic aspects of electrochemical Li+ ion storage can be observed. This study opens the path for optimization of redox active porous structures to overcome diffusion limitations of Faradaic processes.}}, author = {{Wrogemann, Jens Matthies and Lüther, Marco Joes and Bärmann, Peer and Lounasvuori, Mailis and Javed, Ali and Tiemann, Michael and Golnak, Ronny and Xiao, Jie and Petit, Tristan and Placke, Tobias and Winter, Martin}}, issn = {{1433-7851}}, journal = {{Angewandte Chemie International Edition}}, keywords = {{General Chemistry, Catalysis}}, number = {{26}}, pages = {{e202303111}}, publisher = {{Wiley}}, title = {{{Overcoming Diffusion Limitation of Faradaic Processes: Property‐Performance Relationships of 2D Conductive Metal‐Organic Framework Cu3(HHTP)2 for Reversible Lithium‐Ion Storage}}}, doi = {{10.1002/anie.202303111}}, volume = {{62}}, year = {{2023}}, } @misc{36842, booktitle = {{Navigationen - Zeitschrift für Medien- und Kulturwissenschaften}}, editor = {{Eckel, Julia and Ernst, Christoph and Schröter, Jens}}, issn = {{1619-1641}}, keywords = {{tech demo, technology demonstration, demo or die}}, number = {{1}}, title = {{{Navigationen: Tech | Demo}}}, volume = {{23}}, year = {{2023}}, } @inproceedings{45759, author = {{Abbas, Nilab and Bauer, Anna Brigitte and Reinhold, Peter}}, booktitle = {{Lernen, Lehren und Forschen in einer digital geprägten Welt}}, editor = {{van Vorst, Helena}}, location = {{Aachen 2023}}, title = {{{PSΦ: Entwicklung von Unterstützungsmaßnahmen für Theoretische Physik}}}, year = {{2023}}, } @inproceedings{45758, author = {{Bauer, Anna Brigitte and Reinhold, Peter}}, booktitle = {{Lernen, Lehren und Forschen in einer digital geprägten Welt}}, editor = {{van Vorst, Helena}}, location = {{Aachen 2022}}, title = {{{PSФ: Entwicklung einer abgestimmten Studieneingangsphase (Physik) }}}, year = {{2023}}, } @article{43827, abstract = {{A series of new organic donor–π–acceptor dyes incorporating a diquat moiety as a novel electron-acceptor unit have been synthesized and characterized. The analytical data were supported by DFT calculations. These dyes were explored in the aerobic thiocyanation of indoles and pyrroles. Here they showed a high photocatalytic activity under visible light, giving isolated yields of up to 97 %. In addition, the photocatalytic activity of standalone diquat and methyl viologen through formation of an electron donor acceptor complex is presented.}}, author = {{Meier, Armin and Badalov, Sabuhi and Biktagirov, Timur and Schmidt, Wolf Gero and Wilhelm, René}}, issn = {{0947-6539}}, journal = {{Chemistry – A European Journal}}, keywords = {{General Chemistry, Catalysis, Organic Chemistry}}, number = {{22}}, pages = {{ e202203541}}, publisher = {{Wiley}}, title = {{{Diquat Based Dyes: A New Class of Photoredox Catalysts and Their Use in Aerobic Thiocyanation}}}, doi = {{10.1002/chem.202203541}}, volume = {{ 29}}, year = {{2023}}, } @article{45764, abstract = {{As a benchmark, the structural, electronic and optical properties of the three main phases of TiO$\rm{_2}$ crystals have been calculated using Hubbard U correction and hybrid functional methods in density-functional theory. These calculations are compared concerning the available experimental observations on pristine TiO$\rm{_2}$ crystals. Modified hybrid functionals, particularly the PBE0 functional with 11.4% fraction of exact exchange, are shown to provide highly accurate atomic structures and also accurate electronic structure data, including optical excitation energies. With $\rm{DFT+U}$, accurate optical spectra are also possible, but only if the Hubbard U is applied on the O $\rm2p$ electrons exclusively. Furthermore, both methods, the 11.4%-PBE0 hybrid functional and the $\rm{DFT+U_p}$ scheme have been used to study TiO$\rm{_2}$ amorphous ultra-thin films, confirming the agreement of the two methods even with respect to small details of the optical spectra. Our results show that the proposed $\rm{DFT+U_p}$ methodology is computationally efficient, but still accurate. It can be applied to well-ordered TiO$\rm{_2}$ polymorphs as well as to amorphous TiO$\rm{_2}$ and will allow for the calculations of complex titania-based structures.}}, author = {{Badalov, Sabuhi and Bocchini, Adriana and Wilhelm, Rene and Kozub, A. L. and Gerstmann, Uwe and Schmidt, Wolf Gero}}, journal = {{Materials Research Express}}, publisher = {{IOP Publishing}}, title = {{{Rutile, anatase, brookite and titania thin film from Hubbard corrected and hybrid DFT}}}, doi = {{10.1088/2053-1591/ace0fa}}, year = {{2023}}, } @article{45782, abstract = {{The development of automotive components with reduced greenhouse gas (GHG) emissions is needed to reduce overall vehicle emissions. Life Cycle Engineering (LCE) based on Life Cycle Assessment (LCA) supports this by providing holistic information and improvement potentials regarding eco-efficient products. Key factors influencing LCAs of automotive components, such as material production, will change in the future. First approaches for integrating future scenarios for these key factors into LCE already exist, but they only consider a limited number of parameters and scenarios. This work aims to develop a method that can be practically applied in the industry for integrating prospective LCAs (pLCA) into the LCE of automotive components, considering relevant parameters and consistent scenarios. Therefore, pLCA methods are further developed to investigate the influence of future scenarios on the GHG emissions of automotive components. The practical application is demonstrated for a vehicle component with different design options. This paper shows that different development paths of the foreground and background system can shift the ecological optimum of design alternatives. Therefore, future pathways of relevant parameters must be considered comprehensively to reduce GHG emissions of future vehicles. This work contributes to the methodological and practical integration of pLCA into automotive development processes and provides quantitative results.}}, author = {{Grenz, Julian and Ostermann, Moritz and Käsewieter, Karoline and Cerdas, Felipe and Marten, Thorsten and Herrmann, Christoph and Tröster, Thomas}}, issn = {{2071-1050}}, journal = {{Sustainability}}, keywords = {{prospective LCA, life cycle engineering (LCE), lightweight design, automotive components, body parts, circular economy, steel, aluminum, hybrid materials, fiber metal laminates}}, number = {{13}}, publisher = {{MDPI AG}}, title = {{{Integrating Prospective LCA in the Development of Automotive Components}}}, doi = {{10.3390/su151310041}}, volume = {{15}}, year = {{2023}}, } @inproceedings{31880, abstract = {{The notion of neural collapse refers to several emergent phenomena that have been empirically observed across various canonical classification problems. During the terminal phase of training a deep neural network, the feature embedding of all examples of the same class tend to collapse to a single representation, and the features of different classes tend to separate as much as possible. Neural collapse is often studied through a simplified model, called the unconstrained feature representation, in which the model is assumed to have "infinite expressivity" and can map each data point to any arbitrary representation. In this work, we propose a more realistic variant of the unconstrained feature representation that takes the limited expressivity of the network into account. Empirical evidence suggests that the memorization of noisy data points leads to a degradation (dilation) of the neural collapse. Using a model of the memorization-dilation (M-D) phenomenon, we show one mechanism by which different losses lead to different performances of the trained network on noisy data. Our proofs reveal why label smoothing, a modification of cross-entropy empirically observed to produce a regularization effect, leads to improved generalization in classification tasks.}}, author = {{Nguyen, Duc Anh and Levie, Ron and Lienen, Julian and Kutyniok, Gitta and Hüllermeier, Eyke}}, booktitle = {{International Conference on Learning Representations, ICLR}}, location = {{Kigali, Ruanda}}, title = {{{Memorization-Dilation: Modeling Neural Collapse Under Noise}}}, year = {{2023}}, } @unpublished{45814, abstract = {{Label noise poses an important challenge in machine learning, especially in deep learning, in which large models with high expressive power dominate the field. Models of that kind are prone to memorizing incorrect labels, thereby harming generalization performance. Many methods have been proposed to address this problem, including robust loss functions and more complex label correction approaches. Robust loss functions are appealing due to their simplicity, but typically lack flexibility, while label correction usually adds substantial complexity to the training setup. In this paper, we suggest to address the shortcomings of both methodologies by "ambiguating" the target information, adding additional, complementary candidate labels in case the learner is not sufficiently convinced of the observed training label. More precisely, we leverage the framework of so-called superset learning to construct set-valued targets based on a confidence threshold, which deliver imprecise yet more reliable beliefs about the ground-truth, effectively helping the learner to suppress the memorization effect. In an extensive empirical evaluation, our method demonstrates favorable learning behavior on synthetic and real-world noise, confirming the effectiveness in detecting and correcting erroneous training labels.}}, author = {{Lienen, Julian and Hüllermeier, Eyke}}, booktitle = {{arXiv:2305.13764}}, title = {{{Mitigating Label Noise through Data Ambiguation}}}, year = {{2023}}, } @inproceedings{33734, abstract = {{Many applications require explainable node classification in knowledge graphs. Towards this end, a popular ``white-box'' approach is class expression learning: Given sets of positive and negative nodes, class expressions in description logics are learned that separate positive from negative nodes. Most existing approaches are search-based approaches generating many candidate class expressions and selecting the best one. However, they often take a long time to find suitable class expressions. In this paper, we cast class expression learning as a translation problem and propose a new family of class expression learning approaches which we dub neural class expression synthesizers. Training examples are ``translated'' into class expressions in a fashion akin to machine translation. Consequently, our synthesizers are not subject to the runtime limitations of search-based approaches. We study three instances of this novel family of approaches based on LSTMs, GRUs, and set transformers, respectively. An evaluation of our approach on four benchmark datasets suggests that it can effectively synthesize high-quality class expressions with respect to the input examples in approximately one second on average. Moreover, a comparison to state-of-the-art approaches suggests that we achieve better F-measures on large datasets. For reproducibility purposes, we provide our implementation as well as pretrained models in our public GitHub repository at https://github.com/dice-group/NeuralClassExpressionSynthesis}}, author = {{KOUAGOU, N'Dah Jean and Heindorf, Stefan and Demir, Caglar and Ngonga Ngomo, Axel-Cyrille}}, booktitle = {{The Semantic Web - 20th Extended Semantic Web Conference (ESWC 2023)}}, editor = {{Pesquita, Catia and Jimenez-Ruiz, Ernesto and McCusker, Jamie and Faria, Daniel and Dragoni, Mauro and Dimou, Anastasia and Troncy, Raphael and Hertling, Sven}}, keywords = {{Neural network, Concept learning, Description logics}}, location = {{Hersonissos, Crete, Greece}}, pages = {{209 -- 226}}, publisher = {{Springer International Publishing}}, title = {{{Neural Class Expression Synthesis}}}, doi = {{https://doi.org/10.1007/978-3-031-33455-9_13}}, volume = {{13870}}, year = {{2023}}, } @unpublished{45244, abstract = {{Label noise poses an important challenge in machine learning, especially in deep learning, in which large models with high expressive power dominate the field. Models of that kind are prone to memorizing incorrect labels, thereby harming generalization performance. Many methods have been proposed to address this problem, including robust loss functions and more complex label correction approaches. Robust loss functions are appealing due to their simplicity, but typically lack flexibility, while label correction usually adds substantial complexity to the training setup. In this paper, we suggest to address the shortcomings of both methodologies by "ambiguating" the target information, adding additional, complementary candidate labels in case the learner is not sufficiently convinced of the observed training label. More precisely, we leverage the framework of so-called superset learning to construct set-valued targets based on a confidence threshold, which deliver imprecise yet more reliable beliefs about the ground-truth, effectively helping the learner to suppress the memorization effect. In an extensive empirical evaluation, our method demonstrates favorable learning behavior on synthetic and real-world noise, confirming the effectiveness in detecting and correcting erroneous training labels.}}, author = {{Lienen, Julian and Hüllermeier, Eyke}}, booktitle = {{arXiv:2305.13764}}, title = {{{Mitigating Label Noise through Data Ambiguation}}}, year = {{2023}}, } @article{45868, abstract = {{Perfect vector vortex beams (PVVBs) have attracted considerable interest due to their peculiar optical features. PVVBs are typically generated through the superposition of perfect vortex beams, which suffer from the limited number of topological charges (TCs). Furthermore, dynamic control of PVVBs is desirable and has not been reported. We propose and experimentally demonstrate hybrid grafted perfect vector vortex beams (GPVVBs) and their dynamic control. Hybrid GPVVBs are generated through the superposition of grafted perfect vortex beams with a multifunctional metasurface. The generated hybrid GPVVBs possess spatially variant rates of polarization change due to the involvement of more TCs. Each hybrid GPVVB includes different GPVVBs in the same beam, adding more design flexibility. Moreover, these beams are dynamically controlled with a rotating half waveplate. The generated dynamic GPVVBs may find applications in the fields where dynamic control is in high demand, including optical encryption, dense data communication, and multiple particle manipulation.}}, author = {{Ahmed, Hammad and Ansari, Muhammad Afnan and Li, Yan and Zentgraf, Thomas and Mehmood, Muhammad Qasim and Chen, Xianzhong}}, issn = {{2041-1723}}, journal = {{Nature Communications}}, keywords = {{General Physics and Astronomy, General Biochemistry, Genetics and Molecular Biology, General Chemistry, Multidisciplinary}}, number = {{1}}, publisher = {{Springer Science and Business Media LLC}}, title = {{{Dynamic control of hybrid grafted perfect vector vortex beams}}}, doi = {{10.1038/s41467-023-39599-8}}, volume = {{14}}, year = {{2023}}, } @inbook{45875, author = {{Götte, Thorsten and Knollmann, Till and Meyer auf der Heide, Friedhelm and Scheideler, Christian and Werthmann, Julian}}, booktitle = {{On-The-Fly Computing -- Individualized IT-services in dynamic markets}}, editor = {{Haake, Claus-Jochen and Meyer auf der Heide, Friedhelm and Platzner, Marco and Wachsmuth, Henning and Wehrheim, Heike}}, pages = {{1----20}}, publisher = {{Heinz Nixdorf Institut, Universität Paderborn}}, title = {{{Capabilities and Limitations of Local Strategies in Dynamic Networks}}}, doi = {{10.5281/zenodo.8060372}}, volume = {{412}}, year = {{2023}}, } @inbook{45895, author = {{Karl, Holger and Maack, Marten and Meyer auf der Heide, Friedhelm and Pukrop, Simon and Redder, Adrian}}, booktitle = {{On-The-Fly Computing -- Individualized IT-services in dynamic markets}}, editor = {{Haake, Claus-Jochen and Meyer auf der Heide, Friedhelm and Platzner, Marco and Wachsmuth, Henning and Wehrheim, Heike}}, pages = {{183--202}}, publisher = {{Heinz Nixdorf Institut, Universität Paderborn}}, title = {{{On-The-Fly Compute Centers II: Execution of Composed Services in Configurable Compute Centers}}}, doi = {{10.5281/zenodo.8068664}}, volume = {{412}}, year = {{2023}}, } @inbook{45901, author = {{Blömer, Johannes and Bobolz, Jan and Eidens, Fabian and Jager, Tibor and Kramer, Paul}}, booktitle = {{On-The-Fly Computing -- Individualized IT-services in dynamic markets}}, editor = {{Haake, Claus-Jochen and Meyer auf der Heide, Friedhelm and Platzner, Marco and Wachsmuth, Henning and Wehrheim, Heike}}, pages = {{237--246}}, publisher = {{Heinz Nixdorf Institut, Universität Paderborn}}, title = {{{Practical Cryptograhic Techniques for Secure and Privacy-Preserving Customer Loyalty Systems}}}, doi = {{10.5281/zenodo.8068755}}, volume = {{412}}, year = {{2023}}, } @inbook{45899, author = {{Boschmann, Alexander and Clausing, Lennart and Jentzsch, Felix and Ghasemzadeh Mohammadi, Hassan and Platzner, Marco}}, booktitle = {{On-The-Fly Computing -- Individualized IT-services in dynamic markets}}, editor = {{Haake, Claus-Jochen and Meyer auf der Heide, Friedhelm and Platzner, Marco and Wachsmuth, Henning and Wehrheim, Heike}}, pages = {{225--236}}, publisher = {{Heinz Nixdorf Institut, Universität Paderborn}}, title = {{{Flexible Industrial Analytics on Reconfigurable Systems-On-Chip}}}, doi = {{10.5281/zenodo.8068713}}, volume = {{412}}, year = {{2023}}, } @inbook{45888, author = {{Wehrheim, Heike and Platzner, Marco and Bodden, Eric and Schubert, Philipp and Pauck, Felix and Jakobs, Marie-Christine}}, booktitle = {{On-The-Fly Computing -- Individualized IT-services in dynamic markets}}, editor = {{Haake, Claus-Jochen and Meyer auf der Heide, Friedhelm and Platzner, Marco and Wachsmuth, Henning and Wehrheim, Heike}}, pages = {{125--144}}, publisher = {{Heinz Nixdorf Institut, Universität Paderborn}}, title = {{{Verifying Software and Reconfigurable Hardware Services}}}, doi = {{10.5281/zenodo.8068583}}, volume = {{412}}, year = {{2023}}, } @inbook{45897, author = {{Gottschalk, Sebastian and Vorbohle, Christian and Kundisch, Dennis and Engels, Gregor and Wünderlich, Nacy V.}}, booktitle = {{On-The-Fly Computing -- Individualized IT-services in dynamic markets}}, editor = {{Haake, Claus-Jochen and Meyer auf der Heide, Friedhelm and Platzner, Marco and Wachsmuth, Henning and Wehrheim, Heike}}, pages = {{203--224}}, publisher = {{Heinz Nixdorf Institut, Universität Paderborn}}, title = {{{Architectural Management of OTF Computing Markets}}}, doi = {{10.5281/zenodo.8068691}}, volume = {{412}}, year = {{2023}}, } @inbook{45891, author = {{Blömer, Johannes and Eidens, Fabian and Jager, Tibor and Niehues, David and Scheideler, Christian}}, booktitle = {{On-The-Fly Computing -- Individualized IT-services in dynamic markets}}, editor = {{Haake, Claus-Jochen and Meyer auf der Heide, Friedhelm and Platzner, Marco and Wachsmuth, Henning and Wehrheim, Heike}}, pages = {{145--164}}, publisher = {{Heinz Nixdorf Institut, Universität Paderborn}}, title = {{{Robustness and Security}}}, doi = {{10.5281/zenodo.8068629}}, volume = {{412}}, year = {{2023}}, } @inbook{45882, author = {{Bäumer, Frederik Simon and Chen, Wei-Fan and Geierhos, Michaela and Kersting, Joschka and Wachsmuth, Henning}}, booktitle = {{On-The-Fly Computing -- Individualized IT-services in dynamic markets}}, editor = {{Haake, Claus-Jochen and Meyer auf der Heide, Friedhelm and Platzner, Marco and Wachsmuth, Henning and Wehrheim, Heike}}, pages = {{65--84}}, publisher = {{Heinz Nixdorf Institut, Universität Paderborn}}, title = {{{Dialogue-based Requirement Compensation and Style-adjusted Data-to-text Generation}}}, doi = {{10.5281/zenodo.8068456}}, volume = {{412}}, year = {{2023}}, } @inbook{45884, author = {{Hanselle, Jonas Manuel and Hüllermeier, Eyke and Mohr, Felix and Ngonga Ngomo, Axel-Cyrille and Sherif, Mohamed and Tornede, Alexander and Wever, Marcel Dominik}}, booktitle = {{On-The-Fly Computing -- Individualized IT-services in dynamic markets}}, editor = {{Haake, Claus-Jochen and Meyer auf der Heide, Friedhelm and Platzner, Marco and Wachsmuth, Henning and Wehrheim, Heike}}, pages = {{85--104}}, publisher = {{Heinz Nixdorf Institut, Universität Paderborn}}, title = {{{Configuration and Evaluation}}}, doi = {{10.5281/zenodo.8068466}}, volume = {{412}}, year = {{2023}}, } @inbook{45878, author = {{Haake, Claus-Jochen and Hehenkamp, Burkhard and Polevoy, Gleb}}, booktitle = {{On-The-Fly Computing -- Individualized IT-services in dynamic markets}}, editor = {{Haake, Claus-Jochen and Meyer auf der Heide, Friedhelm and Platzner, Marco and Wachsmuth, Henning and Wehrheim, Heike}}, pages = {{21--44}}, publisher = {{Heinz Nixdorf Institut, Universität Paderborn}}, title = {{{The Market for Services: Incentives, Algorithms, Implementation}}}, doi = {{10.5281/zenodo.8068414}}, volume = {{412}}, year = {{2023}}, } @inbook{45886, author = {{Wehrheim, Heike and Hüllermeier, Eyke and Becker, Steffen and Becker, Matthias and Richter, Cedric and Sharma, Arnab}}, booktitle = {{On-The-Fly Computing -- Individualized IT-services in dynamic markets}}, editor = {{Haake, Claus-Jochen and Meyer auf der Heide, Friedhelm and Platzner, Marco and Wachsmuth, Henning and Wehrheim, Heike}}, pages = {{105--123}}, publisher = {{Heinz Nixdorf Institut, Universität Paderborn}}, title = {{{Composition Analysis in Unknown Contexts}}}, doi = {{10.5281/zenodo.8068510}}, volume = {{412}}, year = {{2023}}, }