[{"citation":{"bibtex":"@article{Gude_Meschut_Flügge_Fröck_Wald_Neßlinger_Dobrindt-Tittmann_Troschitz_Neubert_Hofmann_et al._2026, title={Corrosion of adhesively bonded alloys in maritime environments: A review}, volume={147}, DOI={10.1016/j.ijadhadh.2026.104264}, number={104264}, journal={International Journal of Adhesion and Adhesives}, publisher={Elsevier BV}, author={Gude, Maik and Meschut, Gerson and Flügge, Wilko and Fröck, Linda and Wald, Christopher and Neßlinger, Vanessa and Dobrindt-Tittmann, Karsten and Troschitz, Juliane and Neubert, Fynn and Hofmann, Martin and et al.}, year={2026} }","ama":"Gude M, Meschut G, Flügge W, et al. Corrosion of adhesively bonded alloys in maritime environments: A review. International Journal of Adhesion and Adhesives. 2026;147. doi:10.1016/j.ijadhadh.2026.104264","mla":"Gude, Maik, et al. “Corrosion of Adhesively Bonded Alloys in Maritime Environments: A Review.” International Journal of Adhesion and Adhesives, vol. 147, 104264, Elsevier BV, 2026, doi:10.1016/j.ijadhadh.2026.104264.","chicago":"Gude, Maik, Gerson Meschut, Wilko Flügge, Linda Fröck, Christopher Wald, Vanessa Neßlinger, Karsten Dobrindt-Tittmann, et al. “Corrosion of Adhesively Bonded Alloys in Maritime Environments: A Review.” International Journal of Adhesion and Adhesives 147 (2026). https://doi.org/10.1016/j.ijadhadh.2026.104264.","short":"M. Gude, G. Meschut, W. Flügge, L. Fröck, C. Wald, V. Neßlinger, K. Dobrindt-Tittmann, J. Troschitz, F. Neubert, M. Hofmann, R. Ostwald, C. Mathiszik, H.C. Schmale, T. Wallmersperger, G. Grundmeier, International Journal of Adhesion and Adhesives 147 (2026).","ieee":"M. Gude et al., “Corrosion of adhesively bonded alloys in maritime environments: A review,” International Journal of Adhesion and Adhesives, vol. 147, Art. no. 104264, 2026, doi: 10.1016/j.ijadhadh.2026.104264.","apa":"Gude, M., Meschut, G., Flügge, W., Fröck, L., Wald, C., Neßlinger, V., Dobrindt-Tittmann, K., Troschitz, J., Neubert, F., Hofmann, M., Ostwald, R., Mathiszik, C., Schmale, H. C., Wallmersperger, T., & Grundmeier, G. (2026). Corrosion of adhesively bonded alloys in maritime environments: A review. International Journal of Adhesion and Adhesives, 147, Article 104264. https://doi.org/10.1016/j.ijadhadh.2026.104264"},"publication":"International Journal of Adhesion and Adhesives","type":"journal_article","date_created":"2026-01-15T08:37:20Z","intvolume":" 147","publication_status":"published","date_updated":"2026-01-15T08:43:07Z","author":[{"full_name":"Gude, Maik","last_name":"Gude","first_name":"Maik"},{"orcid":"0000-0002-2763-1246","first_name":"Gerson","last_name":"Meschut","full_name":"Meschut, Gerson","id":"32056"},{"full_name":"Flügge, Wilko","first_name":"Wilko","last_name":"Flügge"},{"full_name":"Fröck, Linda","first_name":"Linda","last_name":"Fröck"},{"full_name":"Wald, Christopher","last_name":"Wald","first_name":"Christopher"},{"id":"54649","full_name":"Neßlinger, Vanessa","last_name":"Neßlinger","first_name":"Vanessa","orcid":"0000-0001-9416-1646"},{"last_name":"Dobrindt-Tittmann","first_name":"Karsten","full_name":"Dobrindt-Tittmann, Karsten"},{"full_name":"Troschitz, Juliane","last_name":"Troschitz","first_name":"Juliane"},{"first_name":"Fynn","last_name":"Neubert","full_name":"Neubert, Fynn"},{"full_name":"Hofmann, Martin","first_name":"Martin","last_name":"Hofmann"},{"full_name":"Ostwald, Richard","first_name":"Richard","last_name":"Ostwald","orcid":"0000-0003-2147-8444","id":"106876"},{"full_name":"Mathiszik, Christian","last_name":"Mathiszik","first_name":"Christian"},{"full_name":"Schmale, Hans Christian","first_name":"Hans Christian","last_name":"Schmale"},{"full_name":"Wallmersperger, Thomas","last_name":"Wallmersperger","first_name":"Thomas"},{"id":"194","last_name":"Grundmeier","first_name":"Guido","full_name":"Grundmeier, Guido"}],"publication_identifier":{"issn":["0143-7496"]},"title":"Corrosion of adhesively bonded alloys in maritime environments: A review","year":"2026","status":"public","volume":147,"user_id":"54649","doi":"10.1016/j.ijadhadh.2026.104264","language":[{"iso":"eng"}],"_id":"63616","publisher":"Elsevier BV","article_number":"104264"},{"publication_status":"published","date_updated":"2026-01-21T06:50:58Z","year":"2026","status":"public","title":"Error representations for goal-oriented a posteriori error estimation in elasto-plasticity with applications to mesh adaptivity","publication_identifier":{"issn":["0264-4401","1758-7077"]},"author":[{"first_name":"Arnold","last_name":"Tchomgue Simeu","full_name":"Tchomgue Simeu, Arnold","id":"83075"},{"id":"75","full_name":"Caylak, Ismail","first_name":"Ismail","last_name":"Caylak"},{"id":"106876","first_name":"Richard","last_name":"Ostwald","orcid":"0000-0003-2147-8444","full_name":"Ostwald, Richard"}],"user_id":"85414","doi":"10.1108/ec-12-2023-0975","page":"1-40","_id":"63676","publisher":"Emerald","language":[{"iso":"eng"}],"quality_controlled":"1","abstract":[{"text":"\r\n Purpose\r\n The purpose of this paper is to develop new methods of error representation to improve the accuracy and numerical efficiency of a posteriori and goal-oriented adaptive framework of elastoplasticity with Prandtl–Reuss type material laws.\r\n \r\n \r\n Design/methodology/approach\r\n To obtain new methods of error representation for a posteriori and goal-oriented error estimators, weak forms of primal and dual problems are investigated starting with the initial boundary value problem (IBVP). Then, we approximate both problems using temporal discretization. Additionally, we introduce a secant form considering the nonlinearity of elasto-plastic constitutive equations, which is approximated by a tangent form. Finally, we obtain numerical primal and dual solutions and their corresponding error approximations of discretized primal and dual problems, allowing to build several goal-oriented a posteriori error estimators on temporal and spatial adaptive refinement by inserting primal solutions, dual solutions and their error approximations as arguments in residuals of both weak forms as well as in the secant form of the bilinear residual.\r\n \r\n \r\n Findings\r\n An elasto-plastic material is investigated in a framework of goal-oriented error estimator by using separately several methods of error representation to deal with either temporal or spatial adaptive refinement, as well as with both refinements leading to an effective reduction of computational effort. Specifically, new error representations based on goal-oriented error estimators are presented and obtained from primal and dual residuals, which use only primal solutions or only dual solutions or a combination of primal and dual solutions as arguments. Error representations obtained from primal residuals and evaluated using only primal arguments do not require the formulation of a dual problem.\r\n \r\n \r\n Research limitations/implications\r\n The effectiveness of the different proposed methods is illustrated by an example of a perforated sheet for adaptive spatial refinement where new mesh adaptation methods of error representation are compared against existing mesh adaptation methods such as uniform mesh refinement, mesh refinement based on gradient indicators and adjoint-based methods in literature. The framework generates a balanced mesh consisting of fine, medium and coarse elements for accurate results, avoiding a numerically costly simulation with only fine elements.\r\n \r\n \r\n Originality/value\r\n All new proposed methods of error representation successfully estimate actual errors during mesh adaptivity. Furthermore, the proposed methods of error representation allow us to obtain significant reduction and equidistribution of spatial error at the end of the mesh adaptivity process. Their application to a framework of goal-oriented error estimation due to time and mesh adaptivity remains an open issue.\r\n ","lang":"eng"}],"publication":"Engineering Computations","citation":{"mla":"Tchomgue Simeu, Arnold, et al. “Error Representations for Goal-Oriented a Posteriori Error Estimation in Elasto-Plasticity with Applications to Mesh Adaptivity.” Engineering Computations, Emerald, 2026, pp. 1–40, doi:10.1108/ec-12-2023-0975.","bibtex":"@article{Tchomgue Simeu_Caylak_Ostwald_2026, title={Error representations for goal-oriented a posteriori error estimation in elasto-plasticity with applications to mesh adaptivity}, DOI={10.1108/ec-12-2023-0975}, journal={Engineering Computations}, publisher={Emerald}, author={Tchomgue Simeu, Arnold and Caylak, Ismail and Ostwald, Richard}, year={2026}, pages={1–40} }","ama":"Tchomgue Simeu A, Caylak I, Ostwald R. Error representations for goal-oriented a posteriori error estimation in elasto-plasticity with applications to mesh adaptivity. Engineering Computations. Published online 2026:1-40. doi:10.1108/ec-12-2023-0975","ieee":"A. Tchomgue Simeu, I. Caylak, and R. Ostwald, “Error representations for goal-oriented a posteriori error estimation in elasto-plasticity with applications to mesh adaptivity,” Engineering Computations, pp. 1–40, 2026, doi: 10.1108/ec-12-2023-0975.","apa":"Tchomgue Simeu, A., Caylak, I., & Ostwald, R. (2026). Error representations for goal-oriented a posteriori error estimation in elasto-plasticity with applications to mesh adaptivity. Engineering Computations, 1–40. https://doi.org/10.1108/ec-12-2023-0975","chicago":"Tchomgue Simeu, Arnold, Ismail Caylak, and Richard Ostwald. “Error Representations for Goal-Oriented a Posteriori Error Estimation in Elasto-Plasticity with Applications to Mesh Adaptivity.” Engineering Computations, 2026, 1–40. https://doi.org/10.1108/ec-12-2023-0975.","short":"A. Tchomgue Simeu, I. Caylak, R. Ostwald, Engineering Computations (2026) 1–40."},"type":"journal_article","department":[{"_id":"9"},{"_id":"952"},{"_id":"321"}],"date_created":"2026-01-21T06:49:18Z"},{"date_updated":"2026-02-17T11:22:49Z","publication_status":"published","year":"2026","status":"public","title":"A fully implicit mean-field damage formulation with consistent linearization at large deformations","author":[{"id":"93591","last_name":"Zhan","first_name":"Yingjie","full_name":"Zhan, Yingjie"},{"full_name":"Caylak, Ismail","first_name":"Ismail","last_name":"Caylak"},{"id":"106876","orcid":"0000-0003-2147-8444","first_name":"Richard","last_name":"Ostwald","full_name":"Ostwald, Richard"},{"full_name":"Mahnken, Rolf","first_name":"Rolf","last_name":"Mahnken","id":"335"},{"last_name":"Barth","first_name":"Enrico","full_name":"Barth, Enrico"},{"last_name":"Uhlmann","first_name":"Eckart","full_name":"Uhlmann, Eckart"}],"publication_identifier":{"issn":["1081-2865","1741-3028"]},"doi":"10.1177/10812865261420809","user_id":"85414","article_number":"10812865261420809","_id":"64187","language":[{"iso":"eng"}],"publisher":"SAGE Publications","quality_controlled":"1","abstract":[{"lang":"eng","text":"Carbon fiber-reinforced plastics (CFRPs) have become increasingly significant in recent decades due to their remarkable mechanical properties and lightweight nature. This study aims to advance the understanding and simulation of CFRP behavior through the development of a hyperelastic-plastic-damage homogenization method combined with mean-field theory. The material responses of both the fiber and matrix are modeled using strain energy functions that account for damage evolution, while a complete linearization of the homogenization process is derived to ensure the consistent implementation of the Newton–Raphson iteration scheme in large deformation simulations. The innovative aspect of this work lies in the constitutive linearization for the hyperelastic-plastic-damage formulation within a mean-field homogenization framework, providing an efficient Newton algorithm for modeling the nonlinear behavior of CFRP. A failure criterion for the hyperelastic model of fibers is introduced, along with a damage saturation variable in rate form for the matrix, effectively capturing damage evolution. Through discrete formulations for the homogenization, the proposed model’s capability is demonstrated via three numerical examples and validated against experimental investigations, proving its effectiveness and reliability in simulating CFRP damage."}],"publication":"Mathematics and Mechanics of Solids","citation":{"chicago":"Zhan, Yingjie, Ismail Caylak, Richard Ostwald, Rolf Mahnken, Enrico Barth, and Eckart Uhlmann. “A Fully Implicit Mean-Field Damage Formulation with Consistent Linearization at Large Deformations.” Mathematics and Mechanics of Solids, 2026. https://doi.org/10.1177/10812865261420809.","short":"Y. Zhan, I. Caylak, R. Ostwald, R. Mahnken, E. Barth, E. Uhlmann, Mathematics and Mechanics of Solids (2026).","ieee":"Y. Zhan, I. Caylak, R. Ostwald, R. Mahnken, E. Barth, and E. Uhlmann, “A fully implicit mean-field damage formulation with consistent linearization at large deformations,” Mathematics and Mechanics of Solids, Art. no. 10812865261420808, 2026, doi: 10.1177/10812865261420809.","apa":"Zhan, Y., Caylak, I., Ostwald, R., Mahnken, R., Barth, E., & Uhlmann, E. (2026). A fully implicit mean-field damage formulation with consistent linearization at large deformations. Mathematics and Mechanics of Solids, Article 10812865261420808. https://doi.org/10.1177/10812865261420809","bibtex":"@article{Zhan_Caylak_Ostwald_Mahnken_Barth_Uhlmann_2026, title={A fully implicit mean-field damage formulation with consistent linearization at large deformations}, DOI={10.1177/10812865261420809}, number={10812865261420808}, journal={Mathematics and Mechanics of Solids}, publisher={SAGE Publications}, author={Zhan, Yingjie and Caylak, Ismail and Ostwald, Richard and Mahnken, Rolf and Barth, Enrico and Uhlmann, Eckart}, year={2026} }","ama":"Zhan Y, Caylak I, Ostwald R, Mahnken R, Barth E, Uhlmann E. A fully implicit mean-field damage formulation with consistent linearization at large deformations. Mathematics and Mechanics of Solids. Published online 2026. doi:10.1177/10812865261420809","mla":"Zhan, Yingjie, et al. “A Fully Implicit Mean-Field Damage Formulation with Consistent Linearization at Large Deformations.” Mathematics and Mechanics of Solids, 10812865261420808, SAGE Publications, 2026, doi:10.1177/10812865261420809."},"type":"journal_article","department":[{"_id":"9"},{"_id":"952"},{"_id":"321"}],"date_created":"2026-02-17T11:21:00Z"},{"user_id":"74308","volume":147,"_id":"63821","publisher":"Elsevier BV","status":"public","quality_controlled":"1","citation":{"mla":"Gude, Maik, et al. “Corrosion of Adhesively Bonded Alloys in Maritime Environments: A Review.” International Journal of Adhesion and Adhesives, vol. 147, 104264, Elsevier BV, 2026, doi:10.1016/j.ijadhadh.2026.104264.","bibtex":"@article{Gude_Meschut_Flügge_Fröck_Wald_Neßlinger_Dobrindt-Tittmann_Troschitz_Neubert_Hofmann_et al._2026, title={Corrosion of adhesively bonded alloys in maritime environments: A review}, volume={147}, DOI={10.1016/j.ijadhadh.2026.104264}, number={104264}, journal={International Journal of Adhesion and Adhesives}, publisher={Elsevier BV}, author={Gude, Maik and Meschut, Gerson and Flügge, Wilko and Fröck, Linda and Wald, Christopher and Neßlinger, Vanessa and Dobrindt-Tittmann, Karsten and Troschitz, Juliane and Neubert, Fynn Lucas and Hofmann, Martin and et al.}, year={2026} }","ama":"Gude M, Meschut G, Flügge W, et al. Corrosion of adhesively bonded alloys in maritime environments: A review. International Journal of Adhesion and Adhesives. 2026;147. doi:10.1016/j.ijadhadh.2026.104264","ieee":"M. Gude et al., “Corrosion of adhesively bonded alloys in maritime environments: A review,” International Journal of Adhesion and Adhesives, vol. 147, Art. no. 104264, 2026, doi: 10.1016/j.ijadhadh.2026.104264.","apa":"Gude, M., Meschut, G., Flügge, W., Fröck, L., Wald, C., Neßlinger, V., Dobrindt-Tittmann, K., Troschitz, J., Neubert, F. L., Hofmann, M., Ostwald, R., Mathiszik, C., Schmale, H. C., Wallmersperger, T., & Grundmeier, G. (2026). Corrosion of adhesively bonded alloys in maritime environments: A review. International Journal of Adhesion and Adhesives, 147, Article 104264. https://doi.org/10.1016/j.ijadhadh.2026.104264","short":"M. Gude, G. Meschut, W. Flügge, L. Fröck, C. Wald, V. Neßlinger, K. Dobrindt-Tittmann, J. Troschitz, F.L. Neubert, M. Hofmann, R. Ostwald, C. Mathiszik, H.C. Schmale, T. Wallmersperger, G. Grundmeier, International Journal of Adhesion and Adhesives 147 (2026).","chicago":"Gude, Maik, Gerson Meschut, Wilko Flügge, Linda Fröck, Christopher Wald, Vanessa Neßlinger, Karsten Dobrindt-Tittmann, et al. “Corrosion of Adhesively Bonded Alloys in Maritime Environments: A Review.” International Journal of Adhesion and Adhesives 147 (2026). https://doi.org/10.1016/j.ijadhadh.2026.104264."},"doi":"10.1016/j.ijadhadh.2026.104264","article_number":"104264","language":[{"iso":"eng"}],"date_updated":"2026-02-23T10:22:02Z","publication_status":"published","intvolume":" 147","title":"Corrosion of adhesively bonded alloys in maritime environments: A review","year":"2026","author":[{"last_name":"Gude","first_name":"Maik","full_name":"Gude, Maik"},{"id":"32056","first_name":"Gerson","orcid":"0000-0002-2763-1246","last_name":"Meschut","full_name":"Meschut, Gerson"},{"last_name":"Flügge","first_name":"Wilko","full_name":"Flügge, Wilko"},{"full_name":"Fröck, Linda","last_name":"Fröck","first_name":"Linda"},{"first_name":"Christopher","last_name":"Wald","full_name":"Wald, Christopher"},{"full_name":"Neßlinger, Vanessa","last_name":"Neßlinger","first_name":"Vanessa"},{"first_name":"Karsten","last_name":"Dobrindt-Tittmann","full_name":"Dobrindt-Tittmann, Karsten"},{"last_name":"Troschitz","first_name":"Juliane","full_name":"Troschitz, Juliane"},{"id":"74308","full_name":"Neubert, Fynn Lucas","first_name":"Fynn Lucas","orcid":"0009-0006-5243-4531","last_name":"Neubert"},{"full_name":"Hofmann, Martin","first_name":"Martin","last_name":"Hofmann"},{"id":"106876","last_name":"Ostwald","orcid":"0000-0003-2147-8444","first_name":"Richard","full_name":"Ostwald, Richard"},{"first_name":"Christian","last_name":"Mathiszik","full_name":"Mathiszik, Christian"},{"full_name":"Schmale, Hans Christian","last_name":"Schmale","first_name":"Hans Christian"},{"full_name":"Wallmersperger, Thomas","first_name":"Thomas","last_name":"Wallmersperger"},{"id":"194","full_name":"Grundmeier, Guido","first_name":"Guido","last_name":"Grundmeier"}],"publication_identifier":{"issn":["0143-7496"]},"type":"journal_article","department":[{"_id":"157"}],"date_created":"2026-01-30T15:54:11Z","publication":"International Journal of Adhesion and Adhesives"},{"date_created":"2026-01-20T09:06:03Z","type":"journal_article","department":[{"_id":"9"},{"_id":"952"},{"_id":"321"}],"publication":"International Journal of Adhesion and Adhesives","article_number":"104264","language":[{"iso":"eng"}],"doi":"10.1016/j.ijadhadh.2026.104264","title":"Corrosion of adhesively bonded alloys in maritime environments: A review","year":"2026","author":[{"full_name":"Gude, Maik","last_name":"Gude","first_name":"Maik"},{"full_name":"Meschut, Gerson","last_name":"Meschut","first_name":"Gerson","orcid":"0000-0002-2763-1246","id":"32056"},{"full_name":"Flügge, Wilko","first_name":"Wilko","last_name":"Flügge"},{"last_name":"Fröck","first_name":"Linda","full_name":"Fröck, Linda"},{"last_name":"Wald","first_name":"Christopher","full_name":"Wald, Christopher"},{"full_name":"Neßlinger, Vanessa","last_name":"Neßlinger","first_name":"Vanessa"},{"first_name":"Karsten","last_name":"Dobrindt-Tittmann","full_name":"Dobrindt-Tittmann, Karsten"},{"last_name":"Troschitz","first_name":"Juliane","full_name":"Troschitz, Juliane"},{"last_name":"Neubert","first_name":"Fynn","full_name":"Neubert, Fynn"},{"full_name":"Hofmann, Martin","first_name":"Martin","last_name":"Hofmann"},{"id":"106876","first_name":"Richard","last_name":"Ostwald","orcid":"0000-0003-2147-8444","full_name":"Ostwald, Richard"},{"first_name":"Christian","last_name":"Mathiszik","full_name":"Mathiszik, Christian"},{"first_name":"Hans Christian","last_name":"Schmale","full_name":"Schmale, Hans Christian"},{"first_name":"Thomas","last_name":"Wallmersperger","full_name":"Wallmersperger, Thomas"},{"full_name":"Grundmeier, Guido","first_name":"Guido","last_name":"Grundmeier","id":"194"}],"publication_identifier":{"issn":["0143-7496"]},"publication_status":"published","date_updated":"2026-03-04T11:32:09Z","intvolume":" 147","citation":{"ieee":"M. Gude et al., “Corrosion of adhesively bonded alloys in maritime environments: A review,” International Journal of Adhesion and Adhesives, vol. 147, Art. no. 104264, 2026, doi: 10.1016/j.ijadhadh.2026.104264.","mla":"Gude, Maik, et al. “Corrosion of Adhesively Bonded Alloys in Maritime Environments: A Review.” International Journal of Adhesion and Adhesives, vol. 147, 104264, Elsevier BV, 2026, doi:10.1016/j.ijadhadh.2026.104264.","apa":"Gude, M., Meschut, G., Flügge, W., Fröck, L., Wald, C., Neßlinger, V., Dobrindt-Tittmann, K., Troschitz, J., Neubert, F., Hofmann, M., Ostwald, R., Mathiszik, C., Schmale, H. C., Wallmersperger, T., & Grundmeier, G. (2026). Corrosion of adhesively bonded alloys in maritime environments: A review. International Journal of Adhesion and Adhesives, 147, Article 104264. https://doi.org/10.1016/j.ijadhadh.2026.104264","bibtex":"@article{Gude_Meschut_Flügge_Fröck_Wald_Neßlinger_Dobrindt-Tittmann_Troschitz_Neubert_Hofmann_et al._2026, title={Corrosion of adhesively bonded alloys in maritime environments: A review}, volume={147}, DOI={10.1016/j.ijadhadh.2026.104264}, number={104264}, journal={International Journal of Adhesion and Adhesives}, publisher={Elsevier BV}, author={Gude, Maik and Meschut, Gerson and Flügge, Wilko and Fröck, Linda and Wald, Christopher and Neßlinger, Vanessa and Dobrindt-Tittmann, Karsten and Troschitz, Juliane and Neubert, Fynn and Hofmann, Martin and et al.}, year={2026} }","chicago":"Gude, Maik, Gerson Meschut, Wilko Flügge, Linda Fröck, Christopher Wald, Vanessa Neßlinger, Karsten Dobrindt-Tittmann, et al. “Corrosion of Adhesively Bonded Alloys in Maritime Environments: A Review.” International Journal of Adhesion and Adhesives 147 (2026). https://doi.org/10.1016/j.ijadhadh.2026.104264.","short":"M. Gude, G. Meschut, W. Flügge, L. Fröck, C. Wald, V. Neßlinger, K. Dobrindt-Tittmann, J. Troschitz, F. Neubert, M. Hofmann, R. Ostwald, C. Mathiszik, H.C. Schmale, T. Wallmersperger, G. Grundmeier, International Journal of Adhesion and Adhesives 147 (2026).","ama":"Gude M, Meschut G, Flügge W, et al. Corrosion of adhesively bonded alloys in maritime environments: A review. International Journal of Adhesion and Adhesives. 2026;147. doi:10.1016/j.ijadhadh.2026.104264"},"quality_controlled":"1","_id":"63665","publisher":"Elsevier BV","user_id":"85414","volume":147,"status":"public"},{"date_created":"2026-03-18T05:28:29Z","type":"journal_article","department":[{"_id":"9"},{"_id":"952"},{"_id":"321"}],"issue":"6","publication":"International Journal for Numerical Methods in Engineering","abstract":[{"text":"ABSTRACT\r\n Homogenization methods simulate heterogeneous materials like composites effectively, but high computational demands can offset their benefits. This work balances accuracy and efficiency by assessing model and discretization errors of the finite element method (FEM) through an adaptive numerical scheme. Two model hierarchies are introduced, combining mean‐field and full‐field methods, and nonuniform transformation field analysis (NTFA) with full‐field methods. Both hierarchies use a full‐field FEM solution of the representative volume element (RVE) as reference. The study highlights the benefits of using effective constitutive equations from mean‐field and full‐field methods as well as NTFA methods, with a goal‐oriented a posteriori error estimator based on duality techniques controlling mesh and model errors in a forwards‐in‐time manner.","lang":"eng"}],"article_number":"e70294","language":[{"iso":"eng"}],"doi":"10.1002/nme.70294","title":"Mesh and Model Adaptivity for Multiscale Elastoplastic Models With Prandtl‐Reuss Type Material Laws","year":"2026","author":[{"last_name":"Simeu","first_name":"Arnold Tchomgue","full_name":"Simeu, Arnold Tchomgue"},{"first_name":"Ismail","last_name":"Caylak","full_name":"Caylak, Ismail","id":"75"},{"id":"106876","last_name":"Ostwald","orcid":"0000-0003-2147-8444","first_name":"Richard","full_name":"Ostwald, Richard"}],"publication_identifier":{"issn":["0029-5981","1097-0207"]},"publication_status":"published","date_updated":"2026-03-18T05:31:02Z","intvolume":" 127","citation":{"ieee":"A. T. Simeu, I. Caylak, and R. Ostwald, “Mesh and Model Adaptivity for Multiscale Elastoplastic Models With Prandtl‐Reuss Type Material Laws,” International Journal for Numerical Methods in Engineering, vol. 127, no. 6, Art. no. e70294, 2026, doi: 10.1002/nme.70294.","apa":"Simeu, A. T., Caylak, I., & Ostwald, R. (2026). Mesh and Model Adaptivity for Multiscale Elastoplastic Models With Prandtl‐Reuss Type Material Laws. International Journal for Numerical Methods in Engineering, 127(6), Article e70294. https://doi.org/10.1002/nme.70294","mla":"Simeu, Arnold Tchomgue, et al. “Mesh and Model Adaptivity for Multiscale Elastoplastic Models With Prandtl‐Reuss Type Material Laws.” International Journal for Numerical Methods in Engineering, vol. 127, no. 6, e70294, Wiley, 2026, doi:10.1002/nme.70294.","bibtex":"@article{Simeu_Caylak_Ostwald_2026, title={Mesh and Model Adaptivity for Multiscale Elastoplastic Models With Prandtl‐Reuss Type Material Laws}, volume={127}, DOI={10.1002/nme.70294}, number={6e70294}, journal={International Journal for Numerical Methods in Engineering}, publisher={Wiley}, author={Simeu, Arnold Tchomgue and Caylak, Ismail and Ostwald, Richard}, year={2026} }","chicago":"Simeu, Arnold Tchomgue, Ismail Caylak, and Richard Ostwald. “Mesh and Model Adaptivity for Multiscale Elastoplastic Models With Prandtl‐Reuss Type Material Laws.” International Journal for Numerical Methods in Engineering 127, no. 6 (2026). https://doi.org/10.1002/nme.70294.","ama":"Simeu AT, Caylak I, Ostwald R. Mesh and Model Adaptivity for Multiscale Elastoplastic Models With Prandtl‐Reuss Type Material Laws. International Journal for Numerical Methods in Engineering. 2026;127(6). doi:10.1002/nme.70294","short":"A.T. Simeu, I. Caylak, R. Ostwald, International Journal for Numerical Methods in Engineering 127 (2026)."},"quality_controlled":"1","publisher":"Wiley","_id":"65037","user_id":"85414","volume":127,"status":"public"},{"publisher":"Wiley","_id":"65266","volume":26,"user_id":"85414","status":"public","citation":{"ama":"Börger A, Mahnken R, Caylak I, Ostwald R. Aspects of Parameter Identification for a Micromorphic Continuum applied to a Cold‐Box Sand. Proceedings in Applied Mathematics and Mechanics. 2026;26(2). doi:10.1002/pamm.70093","bibtex":"@article{Börger_Mahnken_Caylak_Ostwald_2026, title={Aspects of Parameter Identification for a Micromorphic Continuum applied to a Cold‐Box Sand}, volume={26}, DOI={10.1002/pamm.70093}, number={2e70093}, journal={Proceedings in Applied Mathematics and Mechanics}, publisher={Wiley}, author={Börger, Alexander and Mahnken, Rolf and Caylak, Ismail and Ostwald, Richard}, year={2026} }","mla":"Börger, Alexander, et al. “Aspects of Parameter Identification for a Micromorphic Continuum Applied to a Cold‐Box Sand.” Proceedings in Applied Mathematics and Mechanics, vol. 26, no. 2, e70093, Wiley, 2026, doi:10.1002/pamm.70093.","short":"A. Börger, R. Mahnken, I. Caylak, R. Ostwald, Proceedings in Applied Mathematics and Mechanics 26 (2026).","chicago":"Börger, Alexander, Rolf Mahnken, Ismail Caylak, and Richard Ostwald. “Aspects of Parameter Identification for a Micromorphic Continuum Applied to a Cold‐Box Sand.” Proceedings in Applied Mathematics and Mechanics 26, no. 2 (2026). https://doi.org/10.1002/pamm.70093.","apa":"Börger, A., Mahnken, R., Caylak, I., & Ostwald, R. (2026). Aspects of Parameter Identification for a Micromorphic Continuum applied to a Cold‐Box Sand. Proceedings in Applied Mathematics and Mechanics, 26(2), Article e70093. https://doi.org/10.1002/pamm.70093","ieee":"A. Börger, R. Mahnken, I. Caylak, and R. Ostwald, “Aspects of Parameter Identification for a Micromorphic Continuum applied to a Cold‐Box Sand,” Proceedings in Applied Mathematics and Mechanics, vol. 26, no. 2, Art. no. e70093, 2026, doi: 10.1002/pamm.70093."},"quality_controlled":"1","language":[{"iso":"eng"}],"article_number":"e70093","doi":"10.1002/pamm.70093","publication_identifier":{"issn":["1617-7061","1617-7061"]},"author":[{"first_name":"Alexander","last_name":"Börger","full_name":"Börger, Alexander","id":"52037"},{"last_name":"Mahnken","first_name":"Rolf","full_name":"Mahnken, Rolf"},{"id":"75","full_name":"Caylak, Ismail","last_name":"Caylak","first_name":"Ismail"},{"id":"106876","full_name":"Ostwald, Richard","first_name":"Richard","orcid":"0000-0003-2147-8444","last_name":"Ostwald"}],"title":"Aspects of Parameter Identification for a Micromorphic Continuum applied to a Cold‐Box Sand","year":"2026","intvolume":" 26","date_updated":"2026-04-01T04:54:17Z","publication_status":"published","date_created":"2026-04-01T04:52:34Z","department":[{"_id":"9"},{"_id":"952"},{"_id":"321"}],"type":"journal_article","publication":"Proceedings in Applied Mathematics and Mechanics","issue":"2","abstract":[{"text":"ABSTRACT\r\n This work is concerned with the modeling of a cold‐box sand, a composition of sand grains and a resin binder. To this end, experiments are performed, which show the following characteristics: localization phenomena in the form of a shear band, softening behavior in the force‐displacement curve, and asymmetric behavior for compression and tension. To model this complex material behavior, a micromorphic continuum is used. In the present contribution, we focus on the linear‐elastic regime and demonstrate the identifiability of micromorphic material parameters under deliberately induced inhomogeneous deformation states. In addition to the degrees of freedom of a classical continuum, the micromorphic model has additional degrees of freedom, introduced here in a phenomenological sense to represent kinematically enriched deformation modes associated with the granular microstructure. Accordingly, the micromorphic fields are not interpreted as a separate physical scale (e.g., “binder” vs. “grains”), but as an effective continuum description at the specimen scale. This contribution addresses parameter identification for a micromorphic model of cold‐box sand, with a clear separation between homogeneous deformation states governing classical elastic parameters and inhomogeneous states required to activate and identify micromorphic length‐scale parameters. The main challenge lies in identifying the micro material parameters. To determine these, the corresponding gradient terms in the constitutive formulation must be triggered via properly tuned experiments. Micro‐parameter identification is demonstrated using synthetic data generated from a boundary‐value problem with inhomogeneous displacement fields. The chosen benchmark enables controlled activation of gradient terms and thereby renders optimization‐based identification of micromorphic parameters feasible. The synthetic example is deliberately chosen to assess feasibility and identifiability under controlled conditions, thereby isolating micromorphic identifiability aspects from experimental uncertainties. The novelty of the contribution lies in explicitly linking micromorphic parameter identifiability to kinematic inhomogeneity, and in demonstrating this link within a tractable forward– inverse setting for a linear‐elastic micromorphic continuum.","lang":"eng"}]},{"file_date_updated":"2026-04-18T07:19:12Z","publication":"European Journal of Mechanics / A Solids","citation":{"short":"A. Hamdoun, R. Mahnken, R. Ostwald, European Journal of Mechanics / A Solids (2026).","ama":"Hamdoun A, Mahnken R, Ostwald R. A gradient-damage model for amorphous glassy polymers: Consistent formulation of viscoplasticity and damage evolution in a micromorphic framework. European Journal of Mechanics / A Solids. Published online 2026. doi:https://doi.org/10.1016/j.euromechsol.2026.106137","chicago":"Hamdoun, Ayoub, Rolf Mahnken, and Richard Ostwald. “A Gradient-Damage Model for Amorphous Glassy Polymers: Consistent Formulation of Viscoplasticity and Damage Evolution in a Micromorphic Framework.” European Journal of Mechanics / A Solids, 2026. https://doi.org/10.1016/j.euromechsol.2026.106137.","bibtex":"@article{Hamdoun_Mahnken_Ostwald_2026, title={A gradient-damage model for amorphous glassy polymers: Consistent formulation of viscoplasticity and damage evolution in a micromorphic framework}, DOI={https://doi.org/10.1016/j.euromechsol.2026.106137}, journal={European Journal of Mechanics / A Solids}, author={Hamdoun, Ayoub and Mahnken, Rolf and Ostwald, Richard}, year={2026} }","mla":"Hamdoun, Ayoub, et al. “A Gradient-Damage Model for Amorphous Glassy Polymers: Consistent Formulation of Viscoplasticity and Damage Evolution in a Micromorphic Framework.” European Journal of Mechanics / A Solids, 2026, doi:https://doi.org/10.1016/j.euromechsol.2026.106137.","apa":"Hamdoun, A., Mahnken, R., & Ostwald, R. (2026). A gradient-damage model for amorphous glassy polymers: Consistent formulation of viscoplasticity and damage evolution in a micromorphic framework. European Journal of Mechanics / A Solids. https://doi.org/10.1016/j.euromechsol.2026.106137","ieee":"A. Hamdoun, R. Mahnken, and R. Ostwald, “A gradient-damage model for amorphous glassy polymers: Consistent formulation of viscoplasticity and damage evolution in a micromorphic framework,” European Journal of Mechanics / A Solids, 2026, doi: https://doi.org/10.1016/j.euromechsol.2026.106137."},"type":"journal_article","department":[{"_id":"9"},{"_id":"952"},{"_id":"321"}],"oa":"1","file":[{"file_id":"65459","content_type":"application/pdf","file_name":"1-s2.0-S0997753826001233-main.pdf","file_size":3153415,"access_level":"open_access","relation":"main_file","date_updated":"2026-04-18T07:19:12Z","date_created":"2026-04-18T07:19:12Z","creator":"ahamdoun"}],"date_created":"2026-04-18T07:19:21Z","date_updated":"2026-04-20T11:28:43Z","has_accepted_license":"1","year":"2026","status":"public","title":"A gradient-damage model for amorphous glassy polymers: Consistent formulation of viscoplasticity and damage evolution in a micromorphic framework","author":[{"id":"57708","first_name":"Ayoub","last_name":"Hamdoun","full_name":"Hamdoun, Ayoub"},{"id":"335","full_name":"Mahnken, Rolf","first_name":"Rolf","last_name":"Mahnken"},{"id":"106876","last_name":"Ostwald","orcid":"0000-0003-2147-8444","first_name":"Richard","full_name":"Ostwald, Richard"}],"user_id":"57708","ddc":["620"],"doi":"https://doi.org/10.1016/j.euromechsol.2026.106137","_id":"65458","language":[{"iso":"eng"}]},{"date_created":"2026-06-03T11:00:29Z","type":"journal_article","department":[{"_id":"9"},{"_id":"952"},{"_id":"321"}],"publication":"Mechanics of Materials","article_number":"105740","language":[{"iso":"eng"}],"doi":"10.1016/j.mechmat.2026.105740","year":"2026","title":"A verification-stability-validation framework for optimal hyperelastic modeling of rubber-like materials","author":[{"full_name":"Houari, Fadoua","first_name":"Fadoua","last_name":"Houari","id":"78196"},{"id":"75","full_name":"Caylak, Ismail","last_name":"Caylak","first_name":"Ismail"},{"id":"106876","full_name":"Ostwald, Richard","first_name":"Richard","last_name":"Ostwald","orcid":"0000-0003-2147-8444"}],"publication_identifier":{"issn":["0167-6636"]},"publication_status":"published","date_updated":"2026-06-08T11:40:23Z","intvolume":" 220","citation":{"mla":"Houari, Fadoua, et al. “A Verification-Stability-Validation Framework for Optimal Hyperelastic Modeling of Rubber-like Materials.” Mechanics of Materials, vol. 220, 105740, Elsevier BV, 2026, doi:10.1016/j.mechmat.2026.105740.","bibtex":"@article{Houari_Caylak_Ostwald_2026, title={A verification-stability-validation framework for optimal hyperelastic modeling of rubber-like materials}, volume={220}, DOI={10.1016/j.mechmat.2026.105740}, number={105740}, journal={Mechanics of Materials}, publisher={Elsevier BV}, author={Houari, Fadoua and Caylak, Ismail and Ostwald, Richard}, year={2026} }","ama":"Houari F, Caylak I, Ostwald R. A verification-stability-validation framework for optimal hyperelastic modeling of rubber-like materials. Mechanics of Materials. 2026;220. doi:10.1016/j.mechmat.2026.105740","ieee":"F. Houari, I. Caylak, and R. Ostwald, “A verification-stability-validation framework for optimal hyperelastic modeling of rubber-like materials,” Mechanics of Materials, vol. 220, Art. no. 105740, 2026, doi: 10.1016/j.mechmat.2026.105740.","apa":"Houari, F., Caylak, I., & Ostwald, R. (2026). A verification-stability-validation framework for optimal hyperelastic modeling of rubber-like materials. Mechanics of Materials, 220, Article 105740. https://doi.org/10.1016/j.mechmat.2026.105740","chicago":"Houari, Fadoua, Ismail Caylak, and Richard Ostwald. “A Verification-Stability-Validation Framework for Optimal Hyperelastic Modeling of Rubber-like Materials.” Mechanics of Materials 220 (2026). https://doi.org/10.1016/j.mechmat.2026.105740.","short":"F. Houari, I. Caylak, R. Ostwald, Mechanics of Materials 220 (2026)."},"quality_controlled":"1","_id":"65767","publisher":"Elsevier BV","user_id":"85414","volume":220,"status":"public"},{"status":"public","publisher":"Springer Science and Business Media LLC","_id":"66457","user_id":"85414","volume":5,"popular_science":"1","citation":{"apa":"Krome, S., Kullmer, G., Weiß, D., Duffe, T., & Ostwald, R. (2026). Experimental determination of kinking angles with out-of-phase mixed-mode loading by means of a novel specimen geometry. Discover Mechanical Engineering, 5(1), Article 113. https://doi.org/10.1007/s44245-026-00236-5","ieee":"S. Krome, G. Kullmer, D. Weiß, T. Duffe, and R. Ostwald, “Experimental determination of kinking angles with out-of-phase mixed-mode loading by means of a novel specimen geometry,” Discover Mechanical Engineering, vol. 5, no. 1, Art. no. 113, 2026, doi: 10.1007/s44245-026-00236-5.","chicago":"Krome, Sven, Gunter Kullmer, Deborah Weiß, Tobias Duffe, and Richard Ostwald. “Experimental Determination of Kinking Angles with Out-of-Phase Mixed-Mode Loading by Means of a Novel Specimen Geometry.” Discover Mechanical Engineering 5, no. 1 (2026). https://doi.org/10.1007/s44245-026-00236-5.","short":"S. Krome, G. Kullmer, D. Weiß, T. Duffe, R. Ostwald, Discover Mechanical Engineering 5 (2026).","mla":"Krome, Sven, et al. “Experimental Determination of Kinking Angles with Out-of-Phase Mixed-Mode Loading by Means of a Novel Specimen Geometry.” Discover Mechanical Engineering, vol. 5, no. 1, 113, Springer Science and Business Media LLC, 2026, doi:10.1007/s44245-026-00236-5.","ama":"Krome S, Kullmer G, Weiß D, Duffe T, Ostwald R. Experimental determination of kinking angles with out-of-phase mixed-mode loading by means of a novel specimen geometry. Discover Mechanical Engineering. 2026;5(1). doi:10.1007/s44245-026-00236-5","bibtex":"@article{Krome_Kullmer_Weiß_Duffe_Ostwald_2026, title={Experimental determination of kinking angles with out-of-phase mixed-mode loading by means of a novel specimen geometry}, volume={5}, DOI={10.1007/s44245-026-00236-5}, number={1113}, journal={Discover Mechanical Engineering}, publisher={Springer Science and Business Media LLC}, author={Krome, Sven and Kullmer, Gunter and Weiß, Deborah and Duffe, Tobias and Ostwald, Richard}, year={2026} }"},"project":[{"_id":"132","name":"TRR 285 - Project Area B"},{"_id":"143","name":"TRR 285 - Subproject B04"},{"name":"TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten","_id":"130"}],"title":"Experimental determination of kinking angles with out-of-phase mixed-mode loading by means of a novel specimen geometry","year":"2026","author":[{"full_name":"Krome, Sven","last_name":"Krome","first_name":"Sven","id":"57245"},{"last_name":"Kullmer","first_name":"Gunter","full_name":"Kullmer, Gunter","id":"291"},{"first_name":"Deborah","last_name":"Weiß","full_name":"Weiß, Deborah"},{"last_name":"Duffe","first_name":"Tobias","full_name":"Duffe, Tobias"},{"id":"106876","full_name":"Ostwald, Richard","orcid":"0000-0003-2147-8444","last_name":"Ostwald","first_name":"Richard"}],"publication_identifier":{"issn":["2731-6564"]},"date_updated":"2026-08-06T10:07:30Z","publication_status":"published","intvolume":" 5","article_number":"113","language":[{"iso":"eng"}],"doi":"10.1007/s44245-026-00236-5","issue":"1","publication":"Discover Mechanical Engineering","abstract":[{"text":"Abstract\r\n The service life of fatigue-loaded components that already contain manufacturing‑induced microcracks is primarily governed by the direction and the rate of fatigue-crack growth. When multiple loading components (e.g., tension, compression, shear) act simultaneously but not in temporal synchrony, out‑of‑phase mixed‑mode conditions occur. Such loadings are typical for automotive chassis parts and mechanically joined sheet‑metal assemblies. For optimized design of structural components, the crack kinking angle that occurs under mixed‑mode loading must be predicted as accurately as possible. At present, however, this is still challenging for out‑of‑phase loading conditions. To investigate the associated crack kinking behavior, a novel Compact‑Tension‑Shear‑Mini (CTSM) specimen was developed, enabling controlled generation of plane out-of-phase mixed-mode loading states. Experiments were performed under various combinations of cyclic and static mode I and mode II load components and compared with the analytical predictions of the Out-of-Phase Mixed-Mode (OMM) concept. The measured crack kinking angles showed very good agreement with the predicted values, with mean deviations of only a few degrees, demonstrating the validity and reproducibility of the approach. These findings confirm the applicability of the OMM concept for describing fatigue‑crack propagation under non‑proportional mixed‑mode loading and provide a basis for fatigue‑life assessment of clinched joints and other cyclic multi-axially loaded components.","lang":"eng"}],"date_created":"2026-07-13T11:41:47Z","type":"journal_article","department":[{"_id":"9"},{"_id":"952"},{"_id":"321"}]},{"citation":{"ama":"Kullmer G, Krome S, Weiß D, Schramm B, Ostwald R. Influence of the R-Ratio and the Temperature on the Coefficients of a Novel Exponential Approach for the Formulaic Description of Fatigue Crack Growth Rate Curves. Metals. 2026;16(8). doi:10.3390/met16080835","bibtex":"@article{Kullmer_Krome_Weiß_Schramm_Ostwald_2026, title={Influence of the R-Ratio and the Temperature on the Coefficients of a Novel Exponential Approach for the Formulaic Description of Fatigue Crack Growth Rate Curves}, volume={16}, DOI={10.3390/met16080835}, number={8835}, journal={Metals}, publisher={MDPI AG}, author={Kullmer, Gunter and Krome, Sven and Weiß, Deborah and Schramm, Britta and Ostwald, Richard}, year={2026} }","mla":"Kullmer, Gunter, et al. “Influence of the R-Ratio and the Temperature on the Coefficients of a Novel Exponential Approach for the Formulaic Description of Fatigue Crack Growth Rate Curves.” Metals, vol. 16, no. 8, 835, MDPI AG, 2026, doi:10.3390/met16080835.","chicago":"Kullmer, Gunter, Sven Krome, Deborah Weiß, Britta Schramm, and Richard Ostwald. “Influence of the R-Ratio and the Temperature on the Coefficients of a Novel Exponential Approach for the Formulaic Description of Fatigue Crack Growth Rate Curves.” Metals 16, no. 8 (2026). https://doi.org/10.3390/met16080835.","short":"G. Kullmer, S. Krome, D. Weiß, B. Schramm, R. Ostwald, Metals 16 (2026).","apa":"Kullmer, G., Krome, S., Weiß, D., Schramm, B., & Ostwald, R. (2026). Influence of the R-Ratio and the Temperature on the Coefficients of a Novel Exponential Approach for the Formulaic Description of Fatigue Crack Growth Rate Curves. Metals, 16(8), Article 835. https://doi.org/10.3390/met16080835","ieee":"G. Kullmer, S. Krome, D. Weiß, B. Schramm, and R. Ostwald, “Influence of the R-Ratio and the Temperature on the Coefficients of a Novel Exponential Approach for the Formulaic Description of Fatigue Crack Growth Rate Curves,” Metals, vol. 16, no. 8, Art. no. 835, 2026, doi: 10.3390/met16080835."},"project":[{"_id":"132","name":"TRR 285 - Project Area B"},{"_id":"143","name":"TRR 285 - Subproject B04"},{"_id":"130","name":"TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten"}],"quality_controlled":"1","status":"public","publisher":"MDPI AG","_id":"66673","volume":16,"user_id":"85414","issue":"8","publication":"Metals","abstract":[{"lang":"eng","text":"Investigating crack growth in sheet metal originating from clinched joints is a major part of predicting the service life of mechanically joined structures. Clinching allows different materials to be joined together. A key task in this context is to perform crack growth simulations in the vicinity of clinched joints considering different load and environmental conditions. This requires formulaic descriptions of the fatigue crack growth rate curves for the materials used. For this purpose, fatigue crack growth rate curves for different R-ratios and temperatures are determined experimentally. Generally, these fatigue crack growth rate curves can be described very well using a novel two-part exponential approach for the formulaic description of fatigue crack growth rate curves developed at Applied Mechanics of Paderborn University (FAM). In this case, three parameters are sufficient to describe the fatigue crack growth rate curves. For the material HCT590X, which is frequently used in clinched joints, it is shown as an example how the parameters vary with the R-ratio and the temperature. In addition, at high crack growth rates, a significant rise in the fatigue crack growth rate curve sometimes occurs at both low and high temperatures. To account for this feature, the two-part exponential approach can be expanded to include a third part."}],"date_created":"2026-08-06T10:14:38Z","department":[{"_id":"9"},{"_id":"952"},{"_id":"321"}],"type":"journal_article","publication_identifier":{"issn":["2075-4701"]},"author":[{"last_name":"Kullmer","first_name":"Gunter","full_name":"Kullmer, Gunter","id":"291"},{"first_name":"Sven","last_name":"Krome","full_name":"Krome, Sven","id":"57245"},{"full_name":"Weiß, Deborah","first_name":"Deborah","last_name":"Weiß","id":"45673"},{"full_name":"Schramm, Britta","last_name":"Schramm","first_name":"Britta","id":"4668"},{"last_name":"Ostwald","first_name":"Richard","orcid":"0000-0003-2147-8444","full_name":"Ostwald, Richard","id":"106876"}],"title":"Influence of the R-Ratio and the Temperature on the Coefficients of a Novel Exponential Approach for the Formulaic Description of Fatigue Crack Growth Rate Curves","year":"2026","intvolume":" 16","publication_status":"published","date_updated":"2026-08-06T10:17:54Z","language":[{"iso":"eng"}],"article_number":"835","doi":"10.3390/met16080835"},{"status":"public","user_id":"85414","volume":8,"_id":"61138","publisher":"Springer Science and Business Media LLC","quality_controlled":"1","citation":{"mla":"Zhan, Yingjie, et al. “Damage-Incorporated Four-Step Mean-Field Method for Simulating CFRP Machining: A Novel Algorithmic Approach.” Multiscale and Multidisciplinary Modeling, Experiments and Design, vol. 8, no. 10, 434, Springer Science and Business Media LLC, 2025, doi:10.1007/s41939-025-01026-4.","bibtex":"@article{Zhan_Caylak_Ostwald_Barth_Uhlmann_2025, title={Damage-incorporated four-step mean-field method for simulating CFRP machining: a novel algorithmic approach}, volume={8}, DOI={10.1007/s41939-025-01026-4}, number={10434}, journal={Multiscale and Multidisciplinary Modeling, Experiments and Design}, publisher={Springer Science and Business Media LLC}, author={Zhan, Yingjie and Caylak, Ismail and Ostwald, Richard and Barth, Enrico and Uhlmann, Eckart}, year={2025} }","ama":"Zhan Y, Caylak I, Ostwald R, Barth E, Uhlmann E. Damage-incorporated four-step mean-field method for simulating CFRP machining: a novel algorithmic approach. Multiscale and Multidisciplinary Modeling, Experiments and Design. 2025;8(10). doi:10.1007/s41939-025-01026-4","ieee":"Y. Zhan, I. Caylak, R. Ostwald, E. Barth, and E. Uhlmann, “Damage-incorporated four-step mean-field method for simulating CFRP machining: a novel algorithmic approach,” Multiscale and Multidisciplinary Modeling, Experiments and Design, vol. 8, no. 10, Art. no. 434, 2025, doi: 10.1007/s41939-025-01026-4.","apa":"Zhan, Y., Caylak, I., Ostwald, R., Barth, E., & Uhlmann, E. (2025). Damage-incorporated four-step mean-field method for simulating CFRP machining: a novel algorithmic approach. Multiscale and Multidisciplinary Modeling, Experiments and Design, 8(10), Article 434. https://doi.org/10.1007/s41939-025-01026-4","chicago":"Zhan, Yingjie, Ismail Caylak, Richard Ostwald, Enrico Barth, and Eckart Uhlmann. “Damage-Incorporated Four-Step Mean-Field Method for Simulating CFRP Machining: A Novel Algorithmic Approach.” Multiscale and Multidisciplinary Modeling, Experiments and Design 8, no. 10 (2025). https://doi.org/10.1007/s41939-025-01026-4.","short":"Y. Zhan, I. Caylak, R. Ostwald, E. Barth, E. Uhlmann, Multiscale and Multidisciplinary Modeling, Experiments and Design 8 (2025)."},"date_updated":"2025-10-20T12:05:57Z","publication_status":"published","intvolume":" 8","year":"2025","title":"Damage-incorporated four-step mean-field method for simulating CFRP machining: a novel algorithmic approach","author":[{"last_name":"Zhan","first_name":"Yingjie","full_name":"Zhan, Yingjie","id":"93591"},{"id":"75","full_name":"Caylak, Ismail","last_name":"Caylak","first_name":"Ismail"},{"full_name":"Ostwald, Richard","orcid":"0000-0003-2147-8444","first_name":"Richard","last_name":"Ostwald","id":"106876"},{"last_name":"Barth","first_name":"Enrico","full_name":"Barth, Enrico"},{"last_name":"Uhlmann","first_name":"Eckart","full_name":"Uhlmann, Eckart"}],"publication_identifier":{"issn":["2520-8160","2520-8179"]},"doi":"10.1007/s41939-025-01026-4","article_number":"434","language":[{"iso":"eng"}],"publication":"Multiscale and Multidisciplinary Modeling, Experiments and Design","issue":"10","type":"journal_article","department":[{"_id":"9"},{"_id":"952"},{"_id":"321"}],"date_created":"2025-09-05T07:40:31Z"},{"date_created":"2026-01-27T15:33:53Z","type":"research_data","department":[{"_id":"143"}],"citation":{"ieee":"D. Weiß, S. Krome, T. Duffe, G. Kullmer, and R. Ostwald, Experimentelle Ermittlung von Rissablenkungswinkeln bei außerphasiger Mixed-Mode-Belastung mittels einer neuartigen Probengeometrie. LibreCat University, 2025.","apa":"Weiß, D., Krome, S., Duffe, T., Kullmer, G., & Ostwald, R. (2025). Experimentelle Ermittlung von Rissablenkungswinkeln bei außerphasiger Mixed-Mode-Belastung mittels einer neuartigen Probengeometrie. LibreCat University. https://doi.org/10.48447/BR-2025-490","mla":"Weiß, Deborah, et al. Experimentelle Ermittlung von Rissablenkungswinkeln Bei Außerphasiger Mixed-Mode-Belastung Mittels Einer Neuartigen Probengeometrie. LibreCat University, 2025, doi:https://doi.org/10.48447/BR-2025-490.","bibtex":"@book{Weiß_Krome_Duffe_Kullmer_Ostwald_2025, title={Experimentelle Ermittlung von Rissablenkungswinkeln bei außerphasiger Mixed-Mode-Belastung mittels einer neuartigen Probengeometrie}, DOI={https://doi.org/10.48447/BR-2025-490}, publisher={LibreCat University}, author={Weiß, Deborah and Krome, Sven and Duffe, Tobias and Kullmer, Gunter and Ostwald, Richard}, year={2025} }","short":"D. Weiß, S. Krome, T. Duffe, G. Kullmer, R. Ostwald, Experimentelle Ermittlung von Rissablenkungswinkeln Bei Außerphasiger Mixed-Mode-Belastung Mittels Einer Neuartigen Probengeometrie, LibreCat University, 2025.","ama":"Weiß D, Krome S, Duffe T, Kullmer G, Ostwald R. Experimentelle Ermittlung von Rissablenkungswinkeln Bei Außerphasiger Mixed-Mode-Belastung Mittels Einer Neuartigen Probengeometrie. LibreCat University; 2025. doi:https://doi.org/10.48447/BR-2025-490","chicago":"Weiß, Deborah, Sven Krome, Tobias Duffe, Gunter Kullmer, and Richard Ostwald. Experimentelle Ermittlung von Rissablenkungswinkeln Bei Außerphasiger Mixed-Mode-Belastung Mittels Einer Neuartigen Probengeometrie. LibreCat University, 2025. https://doi.org/10.48447/BR-2025-490."},"project":[{"name":"TRR 285 - Project Area B","_id":"132"}],"publisher":"LibreCat University","_id":"63764","user_id":"57245","doi":"https://doi.org/10.48447/BR-2025-490","year":"2025","status":"public","title":"Experimentelle Ermittlung von Rissablenkungswinkeln bei außerphasiger Mixed-Mode-Belastung mittels einer neuartigen Probengeometrie","author":[{"id":"45673","last_name":"Weiß","first_name":"Deborah","full_name":"Weiß, Deborah"},{"full_name":"Krome, Sven","last_name":"Krome","first_name":"Sven","id":"57245"},{"id":"41322","full_name":"Duffe, Tobias","last_name":"Duffe","first_name":"Tobias"},{"first_name":"Gunter","last_name":"Kullmer","full_name":"Kullmer, Gunter","id":"291"},{"first_name":"Richard","last_name":"Ostwald","orcid":"0000-0003-2147-8444","full_name":"Ostwald, Richard","id":"106876"}],"date_updated":"2026-03-30T10:59:38Z"},{"citation":{"short":"G. Kullmer, D. Weiß, T. Duffe, B. Schramm, R. Ostwald, BESCHREIBUNG DES R- UND DES TEMPERATUREINFLUSSES SOWIE DES EINLAUFVERHALTENS BEI EXPERIMENTELL BESTIMMTEN RISSFORTSCHRITTSKURVEN MIT DEM EXPONENTIALANSATZ, LibreCat University, 2025.","chicago":"Kullmer, Gunter, Deborah Weiß, Tobias Duffe, Britta Schramm, and Richard Ostwald. BESCHREIBUNG DES R- UND DES TEMPERATUREINFLUSSES SOWIE DES EINLAUFVERHALTENS BEI EXPERIMENTELL BESTIMMTEN RISSFORTSCHRITTSKURVEN MIT DEM EXPONENTIALANSATZ. LibreCat University, 2025. https://doi.org/10.48447/BR-2025-492.","ieee":"G. Kullmer, D. Weiß, T. Duffe, B. Schramm, and R. Ostwald, BESCHREIBUNG DES R- UND DES TEMPERATUREINFLUSSES SOWIE DES EINLAUFVERHALTENS BEI EXPERIMENTELL BESTIMMTEN RISSFORTSCHRITTSKURVEN MIT DEM EXPONENTIALANSATZ. LibreCat University, 2025.","apa":"Kullmer, G., Weiß, D., Duffe, T., Schramm, B., & Ostwald, R. (2025). BESCHREIBUNG DES R- UND DES TEMPERATUREINFLUSSES SOWIE DES EINLAUFVERHALTENS BEI EXPERIMENTELL BESTIMMTEN RISSFORTSCHRITTSKURVEN MIT DEM EXPONENTIALANSATZ. LibreCat University. https://doi.org/10.48447/BR-2025-492","bibtex":"@book{Kullmer_Weiß_Duffe_Schramm_Ostwald_2025, title={BESCHREIBUNG DES R- UND DES TEMPERATUREINFLUSSES SOWIE DES EINLAUFVERHALTENS BEI EXPERIMENTELL BESTIMMTEN RISSFORTSCHRITTSKURVEN MIT DEM EXPONENTIALANSATZ}, DOI={https://doi.org/10.48447/BR-2025-492}, publisher={LibreCat University}, author={Kullmer, Gunter and Weiß, Deborah and Duffe, Tobias and Schramm, Britta and Ostwald, Richard}, year={2025} }","ama":"Kullmer G, Weiß D, Duffe T, Schramm B, Ostwald R. BESCHREIBUNG DES R- UND DES TEMPERATUREINFLUSSES SOWIE DES EINLAUFVERHALTENS BEI EXPERIMENTELL BESTIMMTEN RISSFORTSCHRITTSKURVEN MIT DEM EXPONENTIALANSATZ. LibreCat University; 2025. doi:https://doi.org/10.48447/BR-2025-492","mla":"Kullmer, Gunter, et al. BESCHREIBUNG DES R- UND DES TEMPERATUREINFLUSSES SOWIE DES EINLAUFVERHALTENS BEI EXPERIMENTELL BESTIMMTEN RISSFORTSCHRITTSKURVEN MIT DEM EXPONENTIALANSATZ. LibreCat University, 2025, doi:https://doi.org/10.48447/BR-2025-492."},"date_created":"2026-03-30T11:00:23Z","department":[{"_id":"9"},{"_id":"143"}],"type":"research_data","author":[{"id":"291","full_name":"Kullmer, Gunter","last_name":"Kullmer","first_name":"Gunter"},{"id":"45673","full_name":"Weiß, Deborah","last_name":"Weiß","first_name":"Deborah"},{"id":"41322","last_name":"Duffe","first_name":"Tobias","full_name":"Duffe, Tobias"},{"first_name":"Britta","last_name":"Schramm","full_name":"Schramm, Britta","id":"4668"},{"full_name":"Ostwald, Richard","first_name":"Richard","orcid":"0000-0003-2147-8444","last_name":"Ostwald","id":"106876"}],"title":"BESCHREIBUNG DES R- UND DES TEMPERATUREINFLUSSES SOWIE DES EINLAUFVERHALTENS BEI EXPERIMENTELL BESTIMMTEN RISSFORTSCHRITTSKURVEN MIT DEM EXPONENTIALANSATZ","year":"2025","status":"public","date_updated":"2026-04-07T04:35:27Z","publisher":"LibreCat University","_id":"65221","doi":"https://doi.org/10.48447/BR-2025-492","user_id":"85414"},{"doi":"10.3390/app16010384","language":[{"iso":"eng"}],"article_number":"384","intvolume":" 16","date_updated":"2026-05-12T12:46:22Z","publication_status":"published","publication_identifier":{"issn":["2076-3417"]},"author":[{"last_name":"Krome","first_name":"Sven","full_name":"Krome, Sven","id":"57245"},{"full_name":"Duffe, Tobias","first_name":"Tobias","last_name":"Duffe","id":"41322"},{"id":"291","full_name":"Kullmer, Gunter","first_name":"Gunter","last_name":"Kullmer"},{"id":"4668","full_name":"Schramm, Britta","first_name":"Britta","last_name":"Schramm"},{"id":"106876","full_name":"Ostwald, Richard","orcid":"0000-0003-2147-8444","last_name":"Ostwald","first_name":"Richard"}],"year":"2025","title":"Validation and Verification of Novel Three-Dimensional Crack Growth Simulation Software GmshCrack3D","department":[{"_id":"9"},{"_id":"952"},{"_id":"321"}],"type":"journal_article","date_created":"2026-01-20T08:47:40Z","abstract":[{"text":"The accurate prediction of crack initiation and propagation is essential for assessing the structural integrity of mechanically joined components and other complex assemblies. To overcome the limitations of existing finite element tools, a modular Python framework has been developed to automate three-dimensional crack growth simulations. The program combines geometric reconstruction, adaptive remeshing, and the numerical evaluation of fracture mechanics parameters within a single, fully automated workflow. The framework builds on open-source components and remains solver-independent, enabling straightforward integration with commercial or research finite element codes. A dedicated sequence of modules performs all required steps, from mesh separation and crack insertion to local submodeling, stress and displacement mapping, and iterative crack-front update, without manual interaction. The methodology was verified using a mini-compact tension (Mini-CT) specimen as a benchmark case. The numerical results demonstrate the accurate reproduction of stress intensity factors and energy release rates while achieving high computational efficiency through localized refinement. The developed approach provides a robust basis for crack growth simulations of geometrically complex or residual stress-affected structures. Its high degree of automation and flexibility makes it particularly suited for analyzing cracks in clinched and riveted joints, supporting the predictive design and durability assessment of joined lightweight structures.","lang":"eng"}],"issue":"1","publication":"Applied Sciences","volume":16,"user_id":"7850","publisher":"MDPI AG","_id":"63662","status":"public","project":[{"_id":"132","name":"TRR 285 - Project Area B"},{"name":"TRR 285 - Subproject B04","_id":"143"},{"_id":"130","name":"TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten"}],"quality_controlled":"1","citation":{"bibtex":"@article{Krome_Duffe_Kullmer_Schramm_Ostwald_2025, title={Validation and Verification of Novel Three-Dimensional Crack Growth Simulation Software GmshCrack3D}, volume={16}, DOI={10.3390/app16010384}, number={1384}, journal={Applied Sciences}, publisher={MDPI AG}, author={Krome, Sven and Duffe, Tobias and Kullmer, Gunter and Schramm, Britta and Ostwald, Richard}, year={2025} }","ama":"Krome S, Duffe T, Kullmer G, Schramm B, Ostwald R. Validation and Verification of Novel Three-Dimensional Crack Growth Simulation Software GmshCrack3D. Applied Sciences. 2025;16(1). doi:10.3390/app16010384","mla":"Krome, Sven, et al. “Validation and Verification of Novel Three-Dimensional Crack Growth Simulation Software GmshCrack3D.” Applied Sciences, vol. 16, no. 1, 384, MDPI AG, 2025, doi:10.3390/app16010384.","chicago":"Krome, Sven, Tobias Duffe, Gunter Kullmer, Britta Schramm, and Richard Ostwald. “Validation and Verification of Novel Three-Dimensional Crack Growth Simulation Software GmshCrack3D.” Applied Sciences 16, no. 1 (2025). https://doi.org/10.3390/app16010384.","short":"S. Krome, T. Duffe, G. Kullmer, B. Schramm, R. Ostwald, Applied Sciences 16 (2025).","ieee":"S. Krome, T. Duffe, G. Kullmer, B. Schramm, and R. Ostwald, “Validation and Verification of Novel Three-Dimensional Crack Growth Simulation Software GmshCrack3D,” Applied Sciences, vol. 16, no. 1, Art. no. 384, 2025, doi: 10.3390/app16010384.","apa":"Krome, S., Duffe, T., Kullmer, G., Schramm, B., & Ostwald, R. (2025). Validation and Verification of Novel Three-Dimensional Crack Growth Simulation Software GmshCrack3D. Applied Sciences, 16(1), Article 384. https://doi.org/10.3390/app16010384"}},{"user_id":"85414","volume":75,"page":"1377-1406","publisher":"Springer Science and Business Media LLC","_id":"62767","status":"public","quality_controlled":"1","citation":{"ama":"Najafi Koopas R, Rezaei S, Rauter N, Ostwald R, Lammering R. Introducing a microstructure-embedded autoencoder approach for reconstructing high-resolution solution field data from a reduced parametric space. Computational Mechanics. 2024;75(4):1377-1406. doi:10.1007/s00466-024-02568-z","bibtex":"@article{Najafi Koopas_Rezaei_Rauter_Ostwald_Lammering_2024, title={Introducing a microstructure-embedded autoencoder approach for reconstructing high-resolution solution field data from a reduced parametric space}, volume={75}, DOI={10.1007/s00466-024-02568-z}, number={4}, journal={Computational Mechanics}, publisher={Springer Science and Business Media LLC}, author={Najafi Koopas, Rasoul and Rezaei, Shahed and Rauter, Natalie and Ostwald, Richard and Lammering, Rolf}, year={2024}, pages={1377–1406} }","mla":"Najafi Koopas, Rasoul, et al. “Introducing a Microstructure-Embedded Autoencoder Approach for Reconstructing High-Resolution Solution Field Data from a Reduced Parametric Space.” Computational Mechanics, vol. 75, no. 4, Springer Science and Business Media LLC, 2024, pp. 1377–406, doi:10.1007/s00466-024-02568-z.","short":"R. Najafi Koopas, S. Rezaei, N. Rauter, R. Ostwald, R. Lammering, Computational Mechanics 75 (2024) 1377–1406.","chicago":"Najafi Koopas, Rasoul, Shahed Rezaei, Natalie Rauter, Richard Ostwald, and Rolf Lammering. “Introducing a Microstructure-Embedded Autoencoder Approach for Reconstructing High-Resolution Solution Field Data from a Reduced Parametric Space.” Computational Mechanics 75, no. 4 (2024): 1377–1406. https://doi.org/10.1007/s00466-024-02568-z.","apa":"Najafi Koopas, R., Rezaei, S., Rauter, N., Ostwald, R., & Lammering, R. (2024). Introducing a microstructure-embedded autoencoder approach for reconstructing high-resolution solution field data from a reduced parametric space. Computational Mechanics, 75(4), 1377–1406. https://doi.org/10.1007/s00466-024-02568-z","ieee":"R. Najafi Koopas, S. Rezaei, N. Rauter, R. Ostwald, and R. Lammering, “Introducing a microstructure-embedded autoencoder approach for reconstructing high-resolution solution field data from a reduced parametric space,” Computational Mechanics, vol. 75, no. 4, pp. 1377–1406, 2024, doi: 10.1007/s00466-024-02568-z."},"doi":"10.1007/s00466-024-02568-z","language":[{"iso":"eng"}],"date_updated":"2025-12-03T12:51:26Z","publication_status":"published","intvolume":" 75","year":"2024","title":"Introducing a microstructure-embedded autoencoder approach for reconstructing high-resolution solution field data from a reduced parametric space","publication_identifier":{"issn":["0178-7675","1432-0924"]},"author":[{"last_name":"Najafi Koopas","first_name":"Rasoul","full_name":"Najafi Koopas, Rasoul"},{"full_name":"Rezaei, Shahed","last_name":"Rezaei","first_name":"Shahed"},{"full_name":"Rauter, Natalie","first_name":"Natalie","last_name":"Rauter"},{"full_name":"Ostwald, Richard","first_name":"Richard","orcid":"0000-0003-2147-8444","last_name":"Ostwald","id":"106876"},{"first_name":"Rolf","last_name":"Lammering","full_name":"Lammering, Rolf"}],"type":"journal_article","department":[{"_id":"952"},{"_id":"321"}],"date_created":"2025-12-03T12:37:08Z","abstract":[{"text":"Abstract\r\n In this study, we develop a novel multi-fidelity deep learning approach that transforms low-fidelity solution maps into high-fidelity ones by incorporating parametric space information into an autoencoder architecture. This method’s integration of parametric space information significantly reduces the amount of training data needed to effectively predict high-fidelity solutions from low-fidelity ones. In this study, we examine a two-dimensional steady-state heat transfer analysis within a heterogeneous materials microstructure. The heat conductivity coefficients for two different materials are condensed from a 101 \r\n \r\n $$\\times $$\r\n \r\n ×\r\n \r\n \r\n 101 grid to smaller grids. We then solve the boundary value problem on the coarsest grid using a pre-trained physics-informed neural operator network known as Finite Operator Learning (FOL). The resulting low-fidelity solution is subsequently upscaled back to a 101 \r\n \r\n $$\\times $$\r\n \r\n ×\r\n \r\n \r\n 101 grid using a newly designed enhanced autoencoder. The novelty of the developed enhanced autoencoder lies in the concatenation of heat conductivity maps of different resolutions to the decoder segment in distinct steps. Hence the developed algorithm is named microstructure-embedded autoencoder (MEA). We compare the MEA outcomes with those from finite element methods, the standard U-Net, and an interpolation approach as an upscaling technique. Our analysis shows that MEA outperforms these methods in terms of computational efficiency and error on representative test cases. As a result, the MEA serves as a potential supplement to neural operator networks, effectively upscaling low-fidelity solutions to high-fidelity while preserving critical details often lost in traditional upscaling methods, such as sharp interfaces features lost in the context of interpolation approaches.","lang":"eng"}],"publication":"Computational Mechanics","issue":"4"},{"quality_controlled":"1","citation":{"ama":"Gerlach J, Schulte R, Schowtjak A, et al. Enhancing damage prediction in bulk metal forming through machine learning-assisted parameter identification. Archive of Applied Mechanics. 2024;94(8):2217-2242. doi:10.1007/s00419-024-02634-1","bibtex":"@article{Gerlach_Schulte_Schowtjak_Clausmeyer_Ostwald_Tekkaya_Menzel_2024, title={Enhancing damage prediction in bulk metal forming through machine learning-assisted parameter identification}, volume={94}, DOI={10.1007/s00419-024-02634-1}, number={8}, journal={Archive of Applied Mechanics}, publisher={Springer Science and Business Media LLC}, author={Gerlach, Jan and Schulte, Robin and Schowtjak, Alexander and Clausmeyer, Till and Ostwald, Richard and Tekkaya, A. Erman and Menzel, Andreas}, year={2024}, pages={2217–2242} }","mla":"Gerlach, Jan, et al. “Enhancing Damage Prediction in Bulk Metal Forming through Machine Learning-Assisted Parameter Identification.” Archive of Applied Mechanics, vol. 94, no. 8, Springer Science and Business Media LLC, 2024, pp. 2217–42, doi:10.1007/s00419-024-02634-1.","chicago":"Gerlach, Jan, Robin Schulte, Alexander Schowtjak, Till Clausmeyer, Richard Ostwald, A. Erman Tekkaya, and Andreas Menzel. “Enhancing Damage Prediction in Bulk Metal Forming through Machine Learning-Assisted Parameter Identification.” Archive of Applied Mechanics 94, no. 8 (2024): 2217–42. https://doi.org/10.1007/s00419-024-02634-1.","short":"J. Gerlach, R. Schulte, A. Schowtjak, T. Clausmeyer, R. Ostwald, A.E. Tekkaya, A. Menzel, Archive of Applied Mechanics 94 (2024) 2217–2242.","apa":"Gerlach, J., Schulte, R., Schowtjak, A., Clausmeyer, T., Ostwald, R., Tekkaya, A. E., & Menzel, A. (2024). Enhancing damage prediction in bulk metal forming through machine learning-assisted parameter identification. Archive of Applied Mechanics, 94(8), 2217–2242. https://doi.org/10.1007/s00419-024-02634-1","ieee":"J. Gerlach et al., “Enhancing damage prediction in bulk metal forming through machine learning-assisted parameter identification,” Archive of Applied Mechanics, vol. 94, no. 8, pp. 2217–2242, 2024, doi: 10.1007/s00419-024-02634-1."},"status":"public","volume":94,"user_id":"85414","_id":"62770","publisher":"Springer Science and Business Media LLC","page":"2217-2242","abstract":[{"text":"AbstractThe open-source parameter identification tool ADAPT (A diversely applicable parameter identification Tool) is integrated with a machine learning-based approach for start value prediction in order to calibrate a Gurson–Tvergaard–Needleman (GTN) and a Lemaitre damage model. As representative example case-hardened steel 16MnCrS5 is elaborated. An artificial neural network (ANN) is initially trained by using load–displacement curves derived from simulations of a boundary value problem—instead of using data generated for homogeneous states of deformation at material point or one-element level—with varying material parameter combinations. The ANN is then employed so as to predict sets of material parameters that already provide close solutions to the experiment. These predicted parameter sets serve as starting values for a subsequent multi-objective parameter identification by using ADAPT. ADAPT allows for the consideration of input data from multiple scales, including integral data such as load–displacement curves, full-field data such as displacement and strain fields, and high-resolution experimental void data at the micro-scale. The influence of each data set on prediction quality is analyzed. Using various types of input data introduces additional information, enhancing prediction accuracy. The validation is carried out with respect to experimental void measurements of forward rod extruded parts. The results demonstrate, by incorporating void measurements in the optimization process, that it is possible to improve the quantitative prediction of ductile damage in the sense of void area fractions by factor 28 in forward rod extrusion.","lang":"eng"}],"issue":"8","publication":"Archive of Applied Mechanics","department":[{"_id":"952"},{"_id":"321"}],"type":"journal_article","date_created":"2025-12-03T12:46:31Z","intvolume":" 94","date_updated":"2025-12-03T12:50:41Z","publication_status":"published","publication_identifier":{"issn":["0939-1533","1432-0681"]},"author":[{"full_name":"Gerlach, Jan","first_name":"Jan","last_name":"Gerlach"},{"full_name":"Schulte, Robin","first_name":"Robin","last_name":"Schulte"},{"last_name":"Schowtjak","first_name":"Alexander","full_name":"Schowtjak, Alexander"},{"full_name":"Clausmeyer, Till","first_name":"Till","last_name":"Clausmeyer"},{"first_name":"Richard","last_name":"Ostwald","orcid":"0000-0003-2147-8444","full_name":"Ostwald, Richard","id":"106876"},{"full_name":"Tekkaya, A. Erman","last_name":"Tekkaya","first_name":"A. Erman"},{"first_name":"Andreas","last_name":"Menzel","full_name":"Menzel, Andreas"}],"title":"Enhancing damage prediction in bulk metal forming through machine learning-assisted parameter identification","year":"2024","doi":"10.1007/s00419-024-02634-1","language":[{"iso":"eng"}]},{"publication_identifier":{"issn":["0013-7944"]},"author":[{"last_name":"Najafi Koopas","first_name":"Rasoul","full_name":"Najafi Koopas, Rasoul"},{"last_name":"Rezaei","first_name":"Shahed","full_name":"Rezaei, Shahed"},{"last_name":"Rauter","first_name":"Natalie","full_name":"Rauter, Natalie"},{"id":"106876","orcid":"0000-0003-2147-8444","first_name":"Richard","last_name":"Ostwald","full_name":"Ostwald, Richard"},{"full_name":"Lammering, Rolf","first_name":"Rolf","last_name":"Lammering"}],"year":"2024","title":"A spatiotemporal deep learning framework for prediction of crack dynamics in heterogeneous solids: Efficient mapping of concrete microstructures to its fracture properties","intvolume":" 314","date_updated":"2025-12-03T12:51:12Z","publication_status":"published","language":[{"iso":"eng"}],"article_number":"110675","doi":"10.1016/j.engfracmech.2024.110675","publication":"Engineering Fracture Mechanics","date_created":"2025-12-03T12:40:42Z","department":[{"_id":"952"},{"_id":"321"}],"type":"journal_article","status":"public","_id":"62768","publisher":"Elsevier BV","volume":314,"user_id":"85414","citation":{"short":"R. Najafi Koopas, S. Rezaei, N. Rauter, R. Ostwald, R. Lammering, Engineering Fracture Mechanics 314 (2024).","chicago":"Najafi Koopas, Rasoul, Shahed Rezaei, Natalie Rauter, Richard Ostwald, and Rolf Lammering. “A Spatiotemporal Deep Learning Framework for Prediction of Crack Dynamics in Heterogeneous Solids: Efficient Mapping of Concrete Microstructures to Its Fracture Properties.” Engineering Fracture Mechanics 314 (2024). https://doi.org/10.1016/j.engfracmech.2024.110675.","ieee":"R. Najafi Koopas, S. Rezaei, N. Rauter, R. Ostwald, and R. Lammering, “A spatiotemporal deep learning framework for prediction of crack dynamics in heterogeneous solids: Efficient mapping of concrete microstructures to its fracture properties,” Engineering Fracture Mechanics, vol. 314, Art. no. 110675, 2024, doi: 10.1016/j.engfracmech.2024.110675.","apa":"Najafi Koopas, R., Rezaei, S., Rauter, N., Ostwald, R., & Lammering, R. (2024). A spatiotemporal deep learning framework for prediction of crack dynamics in heterogeneous solids: Efficient mapping of concrete microstructures to its fracture properties. Engineering Fracture Mechanics, 314, Article 110675. https://doi.org/10.1016/j.engfracmech.2024.110675","bibtex":"@article{Najafi Koopas_Rezaei_Rauter_Ostwald_Lammering_2024, title={A spatiotemporal deep learning framework for prediction of crack dynamics in heterogeneous solids: Efficient mapping of concrete microstructures to its fracture properties}, volume={314}, DOI={10.1016/j.engfracmech.2024.110675}, number={110675}, journal={Engineering Fracture Mechanics}, publisher={Elsevier BV}, author={Najafi Koopas, Rasoul and Rezaei, Shahed and Rauter, Natalie and Ostwald, Richard and Lammering, Rolf}, year={2024} }","ama":"Najafi Koopas R, Rezaei S, Rauter N, Ostwald R, Lammering R. A spatiotemporal deep learning framework for prediction of crack dynamics in heterogeneous solids: Efficient mapping of concrete microstructures to its fracture properties. Engineering Fracture Mechanics. 2024;314. doi:10.1016/j.engfracmech.2024.110675","mla":"Najafi Koopas, Rasoul, et al. “A Spatiotemporal Deep Learning Framework for Prediction of Crack Dynamics in Heterogeneous Solids: Efficient Mapping of Concrete Microstructures to Its Fracture Properties.” Engineering Fracture Mechanics, vol. 314, 110675, Elsevier BV, 2024, doi:10.1016/j.engfracmech.2024.110675."},"quality_controlled":"1"},{"abstract":[{"lang":"eng","text":"This study evaluates four widely used fracture simulation methods, comparing their computational expenses and implementation complexities within the finite element (FE) framework when employed on heterogeneous solids. Fracture methods considered encompass the intrinsic cohesive zone model (CZM) using zero-thickness cohesive interface elements (CIEs), the standard phase-field fracture (SPFM) approach, the cohesive phase-field fracture (CPFM) approach, and an innovative hybrid model. The hybrid approach combines the CPFM fracture method with the CZM, specifically applying the CZM within the interface zone. The finite element model studied is characterized by three specific phases: inclusions, matrix, and the interface zone. This case study serves as a potential template for meso- or micro-level simulations involving a variety of composite materials. The thorough assessment of these modeling techniques indicates that the CPFM approach stands out as the most effective computational model, provided that the thickness of the interface zone is not significantly smaller than that of the other phases. In materials like concrete, which contain interfaces within their microstructure, the interface thickness is notably small when compared to other phases. This leads to the hybrid model standing as the most authentic finite element model, utilizing CIEs within the interface to simulate interface debonding. A significant finding from this investigation is that within the CPFM method, for a specific interface thickness, convergence with the hybrid model can be observed. This suggests that the CPFM fracture method could serve as a unified fracture approach for multiphase materials when a specific interfacial thickness is used. In addition, this research provides valuable insights that can advance efforts to fine-tune material microstructures. An investigation of the influence of interfacial material properties, voids, and the spatial arrangement of inclusions shows a pronounced effect of these parameters on the fracture toughness of the material."}],"issue":"1","publication":"Applied Sciences","type":"journal_article","department":[{"_id":"9"},{"_id":"952"},{"_id":"321"}],"date_created":"2025-01-21T13:48:05Z","date_updated":"2025-02-14T10:52:55Z","publication_status":"published","intvolume":" 15","title":"Comparative Analysis of Phase-Field and Intrinsic Cohesive Zone Models for Fracture Simulations in Multiphase Materials with Interfaces: Investigation of the Influence of the Microstructure on the Fracture Properties","year":"2024","author":[{"last_name":"Najafi Koopas","first_name":"Rasoul","full_name":"Najafi Koopas, Rasoul"},{"first_name":"Shahed","last_name":"Rezaei","full_name":"Rezaei, Shahed"},{"full_name":"Rauter, Natalie","last_name":"Rauter","first_name":"Natalie"},{"first_name":"Richard","last_name":"Ostwald","full_name":"Ostwald, Richard","id":"106876"},{"full_name":"Lammering, Rolf","first_name":"Rolf","last_name":"Lammering"}],"publication_identifier":{"issn":["2076-3417"]},"doi":"10.3390/app15010160","article_number":"160","language":[{"iso":"eng"}],"quality_controlled":"1","citation":{"apa":"Najafi Koopas, R., Rezaei, S., Rauter, N., Ostwald, R., & Lammering, R. (2024). Comparative Analysis of Phase-Field and Intrinsic Cohesive Zone Models for Fracture Simulations in Multiphase Materials with Interfaces: Investigation of the Influence of the Microstructure on the Fracture Properties. Applied Sciences, 15(1), Article 160. https://doi.org/10.3390/app15010160","ieee":"R. Najafi Koopas, S. Rezaei, N. Rauter, R. Ostwald, and R. Lammering, “Comparative Analysis of Phase-Field and Intrinsic Cohesive Zone Models for Fracture Simulations in Multiphase Materials with Interfaces: Investigation of the Influence of the Microstructure on the Fracture Properties,” Applied Sciences, vol. 15, no. 1, Art. no. 160, 2024, doi: 10.3390/app15010160.","chicago":"Najafi Koopas, Rasoul, Shahed Rezaei, Natalie Rauter, Richard Ostwald, and Rolf Lammering. “Comparative Analysis of Phase-Field and Intrinsic Cohesive Zone Models for Fracture Simulations in Multiphase Materials with Interfaces: Investigation of the Influence of the Microstructure on the Fracture Properties.” Applied Sciences 15, no. 1 (2024). https://doi.org/10.3390/app15010160.","short":"R. Najafi Koopas, S. Rezaei, N. Rauter, R. Ostwald, R. Lammering, Applied Sciences 15 (2024).","mla":"Najafi Koopas, Rasoul, et al. “Comparative Analysis of Phase-Field and Intrinsic Cohesive Zone Models for Fracture Simulations in Multiphase Materials with Interfaces: Investigation of the Influence of the Microstructure on the Fracture Properties.” Applied Sciences, vol. 15, no. 1, 160, MDPI AG, 2024, doi:10.3390/app15010160.","ama":"Najafi Koopas R, Rezaei S, Rauter N, Ostwald R, Lammering R. Comparative Analysis of Phase-Field and Intrinsic Cohesive Zone Models for Fracture Simulations in Multiphase Materials with Interfaces: Investigation of the Influence of the Microstructure on the Fracture Properties. Applied Sciences. 2024;15(1). doi:10.3390/app15010160","bibtex":"@article{Najafi Koopas_Rezaei_Rauter_Ostwald_Lammering_2024, title={Comparative Analysis of Phase-Field and Intrinsic Cohesive Zone Models for Fracture Simulations in Multiphase Materials with Interfaces: Investigation of the Influence of the Microstructure on the Fracture Properties}, volume={15}, DOI={10.3390/app15010160}, number={1160}, journal={Applied Sciences}, publisher={MDPI AG}, author={Najafi Koopas, Rasoul and Rezaei, Shahed and Rauter, Natalie and Ostwald, Richard and Lammering, Rolf}, year={2024} }"},"status":"public","user_id":"85414","volume":15,"_id":"58309","publisher":"MDPI AG"},{"date_created":"2025-12-03T12:49:17Z","type":"journal_article","department":[{"_id":"952"},{"_id":"321"}],"publication":"European Journal of Mechanics - A/Solids","article_number":"104854","language":[{"iso":"eng"}],"doi":"10.1016/j.euromechsol.2022.104854","title":"Machine learning-assisted parameter identification for constitutive models based on concatenated loading path sequences","year":"2022","author":[{"full_name":"Schulte, Robin","first_name":"Robin","last_name":"Schulte"},{"full_name":"Karca, Cavid","first_name":"Cavid","last_name":"Karca"},{"full_name":"Ostwald, Richard","orcid":"0000-0003-2147-8444","first_name":"Richard","last_name":"Ostwald","id":"106876"},{"last_name":"Menzel","first_name":"Andreas","full_name":"Menzel, Andreas"}],"publication_identifier":{"issn":["0997-7538"]},"date_updated":"2025-12-03T12:50:06Z","publication_status":"published","intvolume":" 98","citation":{"bibtex":"@article{Schulte_Karca_Ostwald_Menzel_2022, title={Machine learning-assisted parameter identification for constitutive models based on concatenated loading path sequences}, volume={98}, DOI={10.1016/j.euromechsol.2022.104854}, number={104854}, journal={European Journal of Mechanics - A/Solids}, publisher={Elsevier BV}, author={Schulte, Robin and Karca, Cavid and Ostwald, Richard and Menzel, Andreas}, year={2022} }","chicago":"Schulte, Robin, Cavid Karca, Richard Ostwald, and Andreas Menzel. “Machine Learning-Assisted Parameter Identification for Constitutive Models Based on Concatenated Loading Path Sequences.” European Journal of Mechanics - A/Solids 98 (2022). https://doi.org/10.1016/j.euromechsol.2022.104854.","ama":"Schulte R, Karca C, Ostwald R, Menzel A. Machine learning-assisted parameter identification for constitutive models based on concatenated loading path sequences. European Journal of Mechanics - A/Solids. 2022;98. doi:10.1016/j.euromechsol.2022.104854","short":"R. Schulte, C. Karca, R. Ostwald, A. Menzel, European Journal of Mechanics - A/Solids 98 (2022).","ieee":"R. Schulte, C. Karca, R. Ostwald, and A. Menzel, “Machine learning-assisted parameter identification for constitutive models based on concatenated loading path sequences,” European Journal of Mechanics - A/Solids, vol. 98, Art. no. 104854, 2022, doi: 10.1016/j.euromechsol.2022.104854.","mla":"Schulte, Robin, et al. “Machine Learning-Assisted Parameter Identification for Constitutive Models Based on Concatenated Loading Path Sequences.” European Journal of Mechanics - A/Solids, vol. 98, 104854, Elsevier BV, 2022, doi:10.1016/j.euromechsol.2022.104854.","apa":"Schulte, R., Karca, C., Ostwald, R., & Menzel, A. (2022). Machine learning-assisted parameter identification for constitutive models based on concatenated loading path sequences. European Journal of Mechanics - A/Solids, 98, Article 104854. https://doi.org/10.1016/j.euromechsol.2022.104854"},"quality_controlled":"1","_id":"62771","publisher":"Elsevier BV","user_id":"85414","volume":98,"status":"public"}]