---
_id: '21209'
abstract:
- lang: ger
text: "Die additive Fertigung mittels Laser Powderbed Fusion Verfahren (L-PBF) von
Metallen wird zunehmend genutzt, um Funktionsbauteile endkonturnah zu fertigen.
Die in der vor-liegenden Arbeit untersuchte Parameter- und Prozessoptimierung
liefert einen Beitrag zur wirtschaftlichen Nutzung des L-PBF und zeigt, dass höhere
Aufbauraten bei der ganzheit-lichen Betrachtung des Prozesses realisierbar sind.\r\nDie
Parameter- und Prozessoptimierung erfordert eine Untersuchung des Einflusses der
Fertigungs- und Nachbearbeitungsparameter auf das erzeugte Volumen sowie auf die
Mikrostruktur und die resultierenden Materialeigenschaften. Das Ziel der vorliegenden
Arbeit ist die Entwicklung einer optimierten Prozessführung mit abschließender
Bewer-tung der Wirtschaftlichkeit. Mit dem entwickelten Gesamtprozess wird eine
um den Faktor 1,6 höhere Aufbaurate erzielt. Des Weiteren wird die Methodik zur
Erarbeitung des opti-mierten Prozessfensters beschrieben, sodass die Herangehensweise
auf weitere Werk-stoffe angewendet werden kann. Die mechanischen Eigenschaften
werden für den stati-schen und dynamischen Lastfall untersucht und mit der Mikrostruktur
korreliert. Abschlie-ßend wird die Prozessoptimierung zur Fertigung eines Demonstrators
eingesetzt und wirtschaftlich validiert. Die Ergebnisse zeigen, dass durch das
hier angewendete Vorge-hen eine Prozesszeitreduktion von 22,5% und eine Kostenreduktion
von 11% realisiert werden kann."
author:
- first_name: Dominik
full_name: Ahlers, Dominik
id: '11207'
last_name: Ahlers
citation:
ama: Ahlers D. Parameter- und Prozessoptimierung für den additiven Fertigungsprozess
im Pulverbett am Beispiel der Legierung Ti6Al4V . Vol 19. Shaker; 2020.
apa: Ahlers, D. (2020). Parameter- und Prozessoptimierung für den additiven Fertigungsprozess
im Pulverbett am Beispiel der Legierung Ti6Al4V (Vol. 19). Shaker.
bibtex: '@book{Ahlers_2020, series={Forschungsberichte des Direct Manufacturing
Research Centers}, title={Parameter- und Prozessoptimierung für den additiven
Fertigungsprozess im Pulverbett am Beispiel der Legierung Ti6Al4V }, volume={19},
publisher={Shaker}, author={Ahlers, Dominik}, year={2020}, collection={Forschungsberichte
des Direct Manufacturing Research Centers} }'
chicago: Ahlers, Dominik. Parameter- und Prozessoptimierung für den additiven
Fertigungsprozess im Pulverbett am Beispiel der Legierung Ti6Al4V . Vol. 19.
Forschungsberichte des Direct Manufacturing Research Centers. Shaker, 2020.
ieee: D. Ahlers, Parameter- und Prozessoptimierung für den additiven Fertigungsprozess
im Pulverbett am Beispiel der Legierung Ti6Al4V , vol. 19. Shaker, 2020.
mla: Ahlers, Dominik. Parameter- und Prozessoptimierung für den additiven Fertigungsprozess
im Pulverbett am Beispiel der Legierung Ti6Al4V . Vol. 19, Shaker, 2020.
short: D. Ahlers, Parameter- und Prozessoptimierung für den additiven Fertigungsprozess
im Pulverbett am Beispiel der Legierung Ti6Al4V , Shaker, 2020.
date_created: 2021-02-12T09:15:01Z
date_updated: 2022-01-06T06:54:49Z
department:
- _id: '9'
- _id: '149'
- _id: '321'
- _id: '219'
intvolume: ' 19'
keyword:
- Additive Manufacturing
- SLM
language:
- iso: ger
page: '137'
publication_identifier:
isbn:
- 978-3844074246
- '3844074244'
publication_status: published
publisher: Shaker
series_title: Forschungsberichte des Direct Manufacturing Research Centers
status: public
title: 'Parameter- und Prozessoptimierung für den additiven Fertigungsprozess im Pulverbett
am Beispiel der Legierung Ti6Al4V '
type: dissertation
user_id: '11207'
volume: 19
year: '2020'
...
---
_id: '21210'
author:
- first_name: Dominik
full_name: Ahlers, Dominik
id: '11207'
last_name: Ahlers
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Ahlers D, Tröster T. Schlussbericht zum Vorhaben “Additive Leichtbaustrukturen
für Flugzeugkomponenten” : Verbund: KOBFS - Kostenoptimierter Baukasten für Flügelsysteme.
TIB: Universität Paderborn; 2019. doi:https://doi.org/10.2314/KXP:1695591887'
apa: 'Ahlers, D., & Tröster, T. (2019). Schlussbericht zum Vorhaben “Additive
Leichtbaustrukturen für Flugzeugkomponenten” : Verbund: KOBFS - Kostenoptimierter
Baukasten für Flügelsysteme. TIB: Universität Paderborn. https://doi.org/10.2314/KXP:1695591887'
bibtex: '@book{Ahlers_Tröster_2019, place={TIB}, title={Schlussbericht zum Vorhaben
“Additive Leichtbaustrukturen für Flugzeugkomponenten” : Verbund: KOBFS - Kostenoptimierter
Baukasten für Flügelsysteme}, DOI={https://doi.org/10.2314/KXP:1695591887},
publisher={Universität Paderborn}, author={Ahlers, Dominik and Tröster, Thomas},
year={2019} }'
chicago: 'Ahlers, Dominik, and Thomas Tröster. Schlussbericht zum Vorhaben “Additive
Leichtbaustrukturen für Flugzeugkomponenten” : Verbund: KOBFS - Kostenoptimierter
Baukasten für Flügelsysteme. TIB: Universität Paderborn, 2019. https://doi.org/10.2314/KXP:1695591887.'
ieee: 'D. Ahlers and T. Tröster, Schlussbericht zum Vorhaben “Additive Leichtbaustrukturen
für Flugzeugkomponenten” : Verbund: KOBFS - Kostenoptimierter Baukasten für Flügelsysteme.
TIB: Universität Paderborn, 2019.'
mla: 'Ahlers, Dominik, and Thomas Tröster. Schlussbericht zum Vorhaben “Additive
Leichtbaustrukturen für Flugzeugkomponenten” : Verbund: KOBFS - Kostenoptimierter
Baukasten für Flügelsysteme. Universität Paderborn, 2019, doi:https://doi.org/10.2314/KXP:1695591887.'
short: 'D. Ahlers, T. Tröster, Schlussbericht zum Vorhaben “Additive Leichtbaustrukturen
für Flugzeugkomponenten” : Verbund: KOBFS - Kostenoptimierter Baukasten für Flügelsysteme,
Universität Paderborn, TIB, 2019.'
date_created: 2021-02-12T09:26:16Z
date_updated: 2022-01-06T06:54:50Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
- _id: '219'
doi: https://doi.org/10.2314/KXP:1695591887
language:
- iso: ger
page: '75'
place: TIB
publication_status: published
publisher: Universität Paderborn
status: public
title: 'Schlussbericht zum Vorhaben "Additive Leichtbaustrukturen für Flugzeugkomponenten"
: Verbund: KOBFS - Kostenoptimierter Baukasten für Flügelsysteme'
type: report
user_id: '11207'
year: '2019'
...
---
_id: '16825'
author:
- first_name: Dominik
full_name: Ahlers, Dominik
id: '11207'
last_name: Ahlers
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Ahlers D, Tröster T. Performance Parameters and HIP Routes for Additively
Manufactured Titanium Alloy Ti6Al4V. Maastricht: EuroPM; 2019.'
apa: 'Ahlers, D., & Tröster, T. (2019). Performance Parameters and HIP Routes
for additively manufactured titanium alloy Ti6Al4V. Maastricht: EuroPM.'
bibtex: '@book{Ahlers_Tröster_2019, place={Maastricht}, series={EuroPM 2019 Congress
& Exhibition – SIS: Optimising the Properties of AM Parts using Hot Isostatic
Pressing}, title={Performance Parameters and HIP Routes for additively manufactured
titanium alloy Ti6Al4V}, publisher={EuroPM}, author={Ahlers, Dominik and Tröster,
Thomas}, year={2019}, collection={EuroPM 2019 Congress & Exhibition – SIS:
Optimising the Properties of AM Parts using Hot Isostatic Pressing} }'
chicago: 'Ahlers, Dominik, and Thomas Tröster. Performance Parameters and HIP
Routes for Additively Manufactured Titanium Alloy Ti6Al4V. EuroPM 2019 Congress
& Exhibition – SIS: Optimising the Properties of AM Parts Using Hot Isostatic
Pressing. Maastricht: EuroPM, 2019.'
ieee: 'D. Ahlers and T. Tröster, Performance Parameters and HIP Routes for additively
manufactured titanium alloy Ti6Al4V. Maastricht: EuroPM, 2019.'
mla: Ahlers, Dominik, and Thomas Tröster. Performance Parameters and HIP Routes
for Additively Manufactured Titanium Alloy Ti6Al4V. EuroPM, 2019.
short: D. Ahlers, T. Tröster, Performance Parameters and HIP Routes for Additively
Manufactured Titanium Alloy Ti6Al4V, EuroPM, Maastricht, 2019.
date_created: 2020-04-22T13:01:09Z
date_updated: 2022-01-06T06:52:57Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
- _id: '219'
language:
- iso: eng
place: Maastricht
publisher: EuroPM
series_title: 'EuroPM 2019 Congress & Exhibition – SIS: Optimising the Properties
of AM Parts using Hot Isostatic Pressing'
status: public
title: Performance Parameters and HIP Routes for additively manufactured titanium
alloy Ti6Al4V
type: misc
user_id: '11207'
year: '2019'
...
---
_id: '16039'
author:
- first_name: Dominik
full_name: Ahlers, Dominik
id: '11207'
last_name: Ahlers
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Ahlers D, Tröster T. Entwicklung einer Prozessroute für die Luftfahrtindustrie
mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von Ti6Al4V. In: ; 2018.'
apa: Ahlers, D., & Tröster, T. (2018). Entwicklung einer Prozessroute für die
Luftfahrtindustrie mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von Ti6Al4V.
Presented at the Rapid.Tech 2018 – Fachforum Luftfahrt, Erfurt.
bibtex: '@inproceedings{Ahlers_Tröster_2018, title={Entwicklung einer Prozessroute
für die Luftfahrtindustrie mit erhöhter Aufbaurate im Laserstrahlschmelzprozess
von Ti6Al4V}, author={Ahlers, Dominik and Tröster, Thomas}, year={2018} }'
chicago: Ahlers, Dominik, and Thomas Tröster. “Entwicklung einer Prozessroute für
die Luftfahrtindustrie mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von
Ti6Al4V,” 2018.
ieee: D. Ahlers and T. Tröster, “Entwicklung einer Prozessroute für die Luftfahrtindustrie
mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von Ti6Al4V,” presented at
the Rapid.Tech 2018 – Fachforum Luftfahrt, Erfurt, 2018.
mla: Ahlers, Dominik, and Thomas Tröster. Entwicklung einer Prozessroute für
die Luftfahrtindustrie mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von
Ti6Al4V. 2018.
short: 'D. Ahlers, T. Tröster, in: 2018.'
conference:
location: Erfurt
name: Rapid.Tech 2018 – Fachforum Luftfahrt
start_date: 2018-06-07
date_created: 2020-02-24T15:57:52Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
- _id: '219'
language:
- iso: ger
status: public
title: Entwicklung einer Prozessroute für die Luftfahrtindustrie mit erhöhter Aufbaurate
im Laserstrahlschmelzprozess von Ti6Al4V
type: conference
user_id: '11207'
year: '2018'
...
---
_id: '16048'
author:
- first_name: Dominik
full_name: Ahlers, Dominik
id: '11207'
last_name: Ahlers
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: S.
full_name: Hermann, S.
last_name: Hermann
- first_name: P.
full_name: Koppa, P.
last_name: Koppa
- first_name: P.
full_name: Gloetter, P.
last_name: Gloetter
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
- first_name: M.
full_name: Peters, M.
last_name: Peters
- first_name: M.
full_name: Burns, M.
last_name: Burns
- first_name: F.
full_name: Hengsbach, F.
last_name: Hengsbach
- first_name: A.
full_name: Altmann, A.
last_name: Altmann
citation:
ama: 'Ahlers D, Tröster T, Hermann S, et al. Selective Laser Melting of Ti6Al4V
with High Build Rates and Following Hot Isostatic Pressing. In: Contributed
Papers from MS&T17. ; 2018. doi:10.7449/2018mst/2018/mst_2018_117_124'
apa: Ahlers, D., Tröster, T., Hermann, S., Koppa, P., Gloetter, P., Schaper, M.,
Peters, M., Burns, M., Hengsbach, F., & Altmann, A. (2018). Selective Laser
Melting of Ti6Al4V with High Build Rates and Following Hot Isostatic Pressing.
Contributed Papers from MS&T17. https://doi.org/10.7449/2018mst/2018/mst_2018_117_124
bibtex: '@inproceedings{Ahlers_Tröster_Hermann_Koppa_Gloetter_Schaper_Peters_Burns_Hengsbach_Altmann_2018,
title={Selective Laser Melting of Ti6Al4V with High Build Rates and Following
Hot Isostatic Pressing}, DOI={10.7449/2018mst/2018/mst_2018_117_124},
booktitle={Contributed Papers from MS&T17}, author={Ahlers, Dominik and Tröster,
Thomas and Hermann, S. and Koppa, P. and Gloetter, P. and Schaper, Mirko and Peters,
M. and Burns, M. and Hengsbach, F. and Altmann, A.}, year={2018} }'
chicago: Ahlers, Dominik, Thomas Tröster, S. Hermann, P. Koppa, P. Gloetter, Mirko
Schaper, M. Peters, M. Burns, F. Hengsbach, and A. Altmann. “Selective Laser Melting
of Ti6Al4V with High Build Rates and Following Hot Isostatic Pressing.” In Contributed
Papers from MS&T17, 2018. https://doi.org/10.7449/2018mst/2018/mst_2018_117_124.
ieee: 'D. Ahlers et al., “Selective Laser Melting of Ti6Al4V with High Build
Rates and Following Hot Isostatic Pressing,” 2018, doi: 10.7449/2018mst/2018/mst_2018_117_124.'
mla: Ahlers, Dominik, et al. “Selective Laser Melting of Ti6Al4V with High Build
Rates and Following Hot Isostatic Pressing.” Contributed Papers from MS&T17,
2018, doi:10.7449/2018mst/2018/mst_2018_117_124.
short: 'D. Ahlers, T. Tröster, S. Hermann, P. Koppa, P. Gloetter, M. Schaper, M.
Peters, M. Burns, F. Hengsbach, A. Altmann, in: Contributed Papers from MS&T17,
2018.'
date_created: 2020-02-24T16:11:19Z
date_updated: 2023-05-24T08:36:56Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
- _id: '219'
doi: 10.7449/2018mst/2018/mst_2018_117_124
language:
- iso: eng
publication: Contributed Papers from MS&T17
publication_identifier:
isbn:
- '9780873397667'
publication_status: published
status: public
title: Selective Laser Melting of Ti6Al4V with High Build Rates and Following Hot
Isostatic Pressing
type: conference
user_id: '72008'
year: '2018'
...
---
_id: '16063'
author:
- first_name: Dominik
full_name: Ahlers, Dominik
id: '11207'
last_name: Ahlers
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Ahlers D, Tröster T. Approve of porostiy for increasing process speed in the
laser melting process of Ti6Al4V. In: ; 2017.'
apa: Ahlers, D., & Tröster, T. (2017). Approve of porostiy for increasing process
speed in the laser melting process of Ti6Al4V. Presented at the 28th Annual International
Solid Freeform Fabrication Symposium 2017, Austin, Texas, USA.
bibtex: '@inproceedings{Ahlers_Tröster_2017, title={Approve of porostiy for increasing
process speed in the laser melting process of Ti6Al4V}, author={Ahlers, Dominik
and Tröster, Thomas}, year={2017} }'
chicago: Ahlers, Dominik, and Thomas Tröster. “Approve of Porostiy for Increasing
Process Speed in the Laser Melting Process of Ti6Al4V,” 2017.
ieee: D. Ahlers and T. Tröster, “Approve of porostiy for increasing process speed
in the laser melting process of Ti6Al4V,” presented at the 28th Annual International
Solid Freeform Fabrication Symposium 2017, Austin, Texas, USA, 2017.
mla: Ahlers, Dominik, and Thomas Tröster. Approve of Porostiy for Increasing
Process Speed in the Laser Melting Process of Ti6Al4V. 2017.
short: 'D. Ahlers, T. Tröster, in: 2017.'
conference:
end_date: 2017-08-09
location: Austin, Texas, USA
name: 28th Annual International Solid Freeform Fabrication Symposium 2017
start_date: 2017-08-07
date_created: 2020-02-24T16:34:43Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
- _id: '219'
language:
- iso: eng
status: public
title: Approve of porostiy for increasing process speed in the laser melting process
of Ti6Al4V
type: conference
user_id: '11207'
year: '2017'
...
---
_id: '16074'
author:
- first_name: Dominik
full_name: Ahlers, Dominik
id: '11207'
last_name: Ahlers
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Ahlers D, Tröster T. Materialkombinationen in der additive Fertigung. In:
; 2017.'
apa: Ahlers, D., & Tröster, T. (2017). Materialkombinationen in der additive
Fertigung. Presented at the Rapid.Tech 2017 – Fachforum Luftfahrt, Erfurt.
bibtex: '@inproceedings{Ahlers_Tröster_2017, title={Materialkombinationen in der
additive Fertigung}, author={Ahlers, Dominik and Tröster, Thomas}, year={2017}
}'
chicago: Ahlers, Dominik, and Thomas Tröster. “Materialkombinationen in der additive
Fertigung,” 2017.
ieee: D. Ahlers and T. Tröster, “Materialkombinationen in der additive Fertigung,”
presented at the Rapid.Tech 2017 – Fachforum Luftfahrt, Erfurt, 2017.
mla: Ahlers, Dominik, and Thomas Tröster. Materialkombinationen in der additive
Fertigung. 2017.
short: 'D. Ahlers, T. Tröster, in: 2017.'
conference:
location: Erfurt
name: Rapid.Tech 2017 – Fachforum Luftfahrt
start_date: 2017-06-22
date_created: 2020-02-25T10:52:14Z
date_updated: 2022-01-06T06:52:43Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
- _id: '219'
language:
- iso: ger
status: public
title: Materialkombinationen in der additive Fertigung
type: conference
user_id: '11207'
year: '2017'
...
---
_id: '16075'
author:
- first_name: Dominik
full_name: Ahlers, Dominik
id: '11207'
last_name: Ahlers
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Ahlers D, Tröster T. Aspekte der Produktentwicklung in der additiven Fertigung.
In: ; 2017.'
apa: 'Ahlers, D., & Tröster, T. (2017). Aspekte der Produktentwicklung in der
additiven Fertigung. Presented at the Technikforum: Design, Konstruktion, 3D Druck:
Der Weg zum fertigen Bauteil, Nördlingen.'
bibtex: '@inproceedings{Ahlers_Tröster_2017, title={Aspekte der Produktentwicklung
in der additiven Fertigung}, author={Ahlers, Dominik and Tröster, Thomas}, year={2017}
}'
chicago: Ahlers, Dominik, and Thomas Tröster. “Aspekte der Produktentwicklung in
der additiven Fertigung,” 2017.
ieee: 'D. Ahlers and T. Tröster, “Aspekte der Produktentwicklung in der additiven
Fertigung,” presented at the Technikforum: Design, Konstruktion, 3D Druck: Der
Weg zum fertigen Bauteil, Nördlingen, 2017.'
mla: Ahlers, Dominik, and Thomas Tröster. Aspekte der Produktentwicklung in der
additiven Fertigung. 2017.
short: 'D. Ahlers, T. Tröster, in: 2017.'
conference:
location: Nördlingen
name: 'Technikforum: Design, Konstruktion, 3D Druck: Der Weg zum fertigen Bauteil'
start_date: 2017-07-04
date_created: 2020-02-25T10:55:13Z
date_updated: 2022-01-06T06:52:43Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
- _id: '219'
language:
- iso: ger
status: public
title: Aspekte der Produktentwicklung in der additiven Fertigung
type: conference
user_id: '11207'
year: '2017'
...
---
_id: '16066'
author:
- first_name: Dominik
full_name: Ahlers, Dominik
id: '11207'
last_name: Ahlers
- first_name: Peter
full_name: Koppa, Peter
last_name: Koppa
- first_name: F.
full_name: Hengsbach, F.
last_name: Hengsbach
- first_name: P.
full_name: Gloetter, P.
last_name: Gloetter
- first_name: A.
full_name: Altmann, A.
last_name: Altmann
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Ahlers D, Koppa P, Hengsbach F, et al. Increasing process speed in the laser
melting process of Ti6Al4V and the reduction of pores during hot isostatic pressing.
In: Proceedings of the 28th Annual InternationalSolid Freeform Fabrication
Symposium – An Additive Manufacturing Conference. ; 2017.'
apa: Ahlers, D., Koppa, P., Hengsbach, F., Gloetter, P., Altmann, A., Schaper, M.,
& Tröster, T. (2017). Increasing process speed in the laser melting process
of Ti6Al4V and the reduction of pores during hot isostatic pressing. Proceedings
of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive
Manufacturing Conference. 28th Annual International Solid Freeform Fabrication
Symposium 2017, Austin, Texas, USA.
bibtex: '@inproceedings{Ahlers_Koppa_Hengsbach_Gloetter_Altmann_Schaper_Tröster_2017,
title={Increasing process speed in the laser melting process of Ti6Al4V and the
reduction of pores during hot isostatic pressing}, booktitle={Proceedings of the
28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing
Conference}, author={Ahlers, Dominik and Koppa, Peter and Hengsbach, F. and Gloetter,
P. and Altmann, A. and Schaper, Mirko and Tröster, Thomas}, year={2017} }'
chicago: Ahlers, Dominik, Peter Koppa, F. Hengsbach, P. Gloetter, A. Altmann, Mirko
Schaper, and Thomas Tröster. “Increasing Process Speed in the Laser Melting Process
of Ti6Al4V and the Reduction of Pores during Hot Isostatic Pressing.” In Proceedings
of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive
Manufacturing Conference, 2017.
ieee: D. Ahlers et al., “Increasing process speed in the laser melting process
of Ti6Al4V and the reduction of pores during hot isostatic pressing,” presented
at the 28th Annual International Solid Freeform Fabrication Symposium 2017, Austin,
Texas, USA, 2017.
mla: Ahlers, Dominik, et al. “Increasing Process Speed in the Laser Melting Process
of Ti6Al4V and the Reduction of Pores during Hot Isostatic Pressing.” Proceedings
of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive
Manufacturing Conference, 2017.
short: 'D. Ahlers, P. Koppa, F. Hengsbach, P. Gloetter, A. Altmann, M. Schaper,
T. Tröster, in: Proceedings of the 28th Annual InternationalSolid Freeform Fabrication
Symposium – An Additive Manufacturing Conference, 2017.'
conference:
end_date: 2017-11-10
location: Austin, Texas, USA
name: 28th Annual International Solid Freeform Fabrication Symposium 2017
start_date: 2017-11-08
date_created: 2020-02-24T16:41:38Z
date_updated: 2023-05-24T08:31:08Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
- _id: '219'
language:
- iso: eng
publication: Proceedings of the 28th Annual InternationalSolid Freeform Fabrication
Symposium – An Additive Manufacturing Conference
status: public
title: Increasing process speed in the laser melting process of Ti6Al4V and the reduction
of pores during hot isostatic pressing
type: conference
user_id: '72008'
year: '2017'
...
---
_id: '16270'
author:
- first_name: T.
full_name: Hickmann, T.
last_name: Hickmann
- first_name: Dominik
full_name: Ahlers, Dominik
id: '11207'
last_name: Ahlers
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: Hickmann T, Ahlers D, Tröster T. Neue Prototypen-Werkzeugtechnologie für Bipolarplatten
und Batteriekomponenten. Der Stahlformenbauer . 2016;(5).
apa: Hickmann, T., Ahlers, D., & Tröster, T. (2016). Neue Prototypen-Werkzeugtechnologie
für Bipolarplatten und Batteriekomponenten. Der Stahlformenbauer , (5).
bibtex: '@article{Hickmann_Ahlers_Tröster_2016, title={Neue Prototypen-Werkzeugtechnologie
für Bipolarplatten und Batteriekomponenten}, number={5}, journal={Der Stahlformenbauer
}, publisher={Technischer Fachverlag Möller}, author={Hickmann, T. and Ahlers,
Dominik and Tröster, Thomas}, year={2016} }'
chicago: Hickmann, T., Dominik Ahlers, and Thomas Tröster. “Neue Prototypen-Werkzeugtechnologie
für Bipolarplatten und Batteriekomponenten.” Der Stahlformenbauer , no.
5 (2016).
ieee: T. Hickmann, D. Ahlers, and T. Tröster, “Neue Prototypen-Werkzeugtechnologie
für Bipolarplatten und Batteriekomponenten,” Der Stahlformenbauer , no.
5, 2016.
mla: Hickmann, T., et al. “Neue Prototypen-Werkzeugtechnologie für Bipolarplatten
und Batteriekomponenten.” Der Stahlformenbauer , no. 5, Technischer Fachverlag
Möller, 2016.
short: T. Hickmann, D. Ahlers, T. Tröster, Der Stahlformenbauer (2016).
date_created: 2020-03-09T09:51:21Z
date_updated: 2022-01-06T06:52:47Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
- _id: '219'
issue: '5'
language:
- iso: ger
publication: 'Der Stahlformenbauer '
publisher: Technischer Fachverlag Möller
status: public
title: Neue Prototypen-Werkzeugtechnologie für Bipolarplatten und Batteriekomponenten
type: journal_article
user_id: '11207'
year: '2016'
...