---
_id: '48790'
abstract:
- lang: eng
text: To ensure uniform documentation of support structure information, a concept
is presented that enables a standardized depiction of support structures in technical
drawings based on ISO 128-3. To this end, requirements for a uniform depiction
are defined and a procedure for drawing entry is presented. The drawing entry
should contain all production-relevant support structure information. The standardized
documentation of support structure information in technical drawings is intended
to ensure a simple, clear and safe exchange of information between business units
or different companies along the value chain. As a result a possible drawing entry
of support structures was developed. To distinguish between different support
structure types, a standardized depiction of geometrical information in a specification
field is shown. The specification field gives a detailed description of the support
structure type, the geometry as well as the connection to the part and the building
platform. Also uncommon support types like lattice structures or CAD based support
structures can be implemented. To ensure the usability the depictio is editable
and extendable.
author:
- first_name: Stefan
full_name: Lammers, Stefan
id: '13835'
last_name: Lammers
- first_name: Thorsten
full_name: Koers, Thorsten
id: '38077'
last_name: Koers
- first_name: Balázs
full_name: Magyar, Balázs
id: '97759'
last_name: Magyar
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
- first_name: Tobias
full_name: Lieneke, Tobias
id: '13956'
last_name: Lieneke
citation:
ama: 'Lammers S, Koers T, Magyar B, Zimmer D, Lieneke T. Depiction of support structures
in technical drawings. In: Beaman J, ed. Proceedings of the 34th Annual International
Solid Freeform Fabrication Symposium 2023. Vol 34. ; 2023. doi:https://doi.org/10.26153/tsw/50982'
apa: Lammers, S., Koers, T., Magyar, B., Zimmer, D., & Lieneke, T. (2023). Depiction
of support structures in technical drawings. In J. Beaman (Ed.), Proceedings
of the 34th Annual International Solid Freeform Fabrication Symposium 2023
(Vol. 34). https://doi.org/10.26153/tsw/50982
bibtex: '@inproceedings{Lammers_Koers_Magyar_Zimmer_Lieneke_2023, title={Depiction
of support structures in technical drawings}, volume={34}, DOI={https://doi.org/10.26153/tsw/50982},
booktitle={Proceedings of the 34th Annual International Solid Freeform Fabrication
Symposium 2023}, author={Lammers, Stefan and Koers, Thorsten and Magyar, Balázs
and Zimmer, Detmar and Lieneke, Tobias}, editor={Beaman, Joseph}, year={2023}
}'
chicago: Lammers, Stefan, Thorsten Koers, Balázs Magyar, Detmar Zimmer, and Tobias
Lieneke. “Depiction of Support Structures in Technical Drawings.” In Proceedings
of the 34th Annual International Solid Freeform Fabrication Symposium 2023,
edited by Joseph Beaman, Vol. 34, 2023. https://doi.org/10.26153/tsw/50982.
ieee: 'S. Lammers, T. Koers, B. Magyar, D. Zimmer, and T. Lieneke, “Depiction of
support structures in technical drawings,” in Proceedings of the 34th Annual
International Solid Freeform Fabrication Symposium 2023, Austin, Texas, USA,
2023, vol. 34, doi: https://doi.org/10.26153/tsw/50982.'
mla: Lammers, Stefan, et al. “Depiction of Support Structures in Technical Drawings.”
Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium
2023, edited by Joseph Beaman, vol. 34, 2023, doi:https://doi.org/10.26153/tsw/50982.
short: 'S. Lammers, T. Koers, B. Magyar, D. Zimmer, T. Lieneke, in: J. Beaman (Ed.),
Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium
2023, 2023.'
conference:
end_date: 2023-08-16
location: Austin, Texas, USA
name: 34th Annual International Solid Freeform Fabrication Symposium (SFF Symp 2023)
start_date: 2023-08-14
date_created: 2023-11-13T09:17:35Z
date_updated: 2026-03-19T08:26:25Z
department:
- _id: '146'
- _id: '219'
- _id: '624'
- _id: '9'
doi: https://doi.org/10.26153/tsw/50982
editor:
- first_name: Joseph
full_name: Beaman, Joseph
last_name: Beaman
intvolume: ' 34'
language:
- iso: eng
main_file_link:
- url: https://utw10945.utweb.utexas.edu/sites/default/files/2023/053%20DepictionofSupportStructuresinTechnicalDrawings.pdf
publication: Proceedings of the 34th Annual International Solid Freeform Fabrication
Symposium 2023
quality_controlled: '1'
status: public
title: Depiction of support structures in technical drawings
type: conference
user_id: '38077'
volume: 34
year: '2023'
...
---
_id: '23734'
author:
- first_name: Stefan
full_name: Lammers, Stefan
id: '13835'
last_name: Lammers
- first_name: Anne
full_name: Kruse, Anne
id: '55833'
last_name: Kruse
- first_name: Jan
full_name: Gierse, Jan
last_name: Gierse
- first_name: Johannes
full_name: Tominski, Johannes
last_name: Tominski
- first_name: Christian-Friedrich
full_name: Lindemann, Christian-Friedrich
id: '2930'
last_name: Lindemann
citation:
ama: 'Lammers S, Kruse A, Gierse J, Tominski J, Lindemann C-F. Konstruktionsrichtlinien
in der Produktentwicklung. In: Koch R, Zimmer D, Tröster T, Gräßler I, eds. Mehrzieloptimierte
und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren
im Produktentstehungsprozess. ; 2021.'
apa: Lammers, S., Kruse, A., Gierse, J., Tominski, J., & Lindemann, C.-F. (2021).
Konstruktionsrichtlinien in der Produktentwicklung. In R. Koch, D. Zimmer, T.
Tröster, & I. Gräßler (Eds.), Mehrzieloptimierte und durchgängig automatisierte
Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess.
bibtex: '@inbook{Lammers_Kruse_Gierse_Tominski_Lindemann_2021, title={Konstruktionsrichtlinien
in der Produktentwicklung}, booktitle={Mehrzieloptimierte und durchgängig automatisierte
Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess},
author={Lammers, Stefan and Kruse, Anne and Gierse, Jan and Tominski, Johannes
and Lindemann, Christian-Friedrich}, editor={Koch, Rainer and Zimmer, Detmar and
Tröster, Thomas and Gräßler, IrisEditors}, year={2021} }'
chicago: Lammers, Stefan, Anne Kruse, Jan Gierse, Johannes Tominski, and Christian-Friedrich
Lindemann. “Konstruktionsrichtlinien in der Produktentwicklung.” In Mehrzieloptimierte
und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren
im Produktentstehungsprozess, edited by Rainer Koch, Detmar Zimmer, Thomas
Tröster, and Iris Gräßler, 2021.
ieee: S. Lammers, A. Kruse, J. Gierse, J. Tominski, and C.-F. Lindemann, “Konstruktionsrichtlinien
in der Produktentwicklung,” in Mehrzieloptimierte und durchgängig automatisierte
Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess,
R. Koch, D. Zimmer, T. Tröster, and I. Gräßler, Eds. 2021.
mla: Lammers, Stefan, et al. “Konstruktionsrichtlinien in der Produktentwicklung.”
Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive
Fertigungsverfahren im Produktentstehungsprozess, edited by Rainer Koch et
al., 2021.
short: 'S. Lammers, A. Kruse, J. Gierse, J. Tominski, C.-F. Lindemann, in: R. Koch,
D. Zimmer, T. Tröster, I. Gräßler (Eds.), Mehrzieloptimierte und durchgängig automatisierte
Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess,
2021.'
date_created: 2021-09-03T10:08:27Z
date_updated: 2022-01-06T06:55:59Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
editor:
- first_name: Rainer
full_name: Koch, Rainer
last_name: Koch
- first_name: Detmar
full_name: Zimmer, Detmar
last_name: Zimmer
- first_name: Thomas
full_name: Tröster, Thomas
last_name: Tröster
- first_name: Iris
full_name: Gräßler, Iris
last_name: Gräßler
language:
- iso: ger
publication: Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung
für Additive Fertigungsverfahren im Produktentstehungsprozess
publication_identifier:
isbn:
- 978-3-8440-7932-6
publication_status: published
status: public
title: Konstruktionsrichtlinien in der Produktentwicklung
type: book_chapter
user_id: '13835'
year: '2021'
...
---
_id: '32799'
abstract:
- lang: eng
text: The advantages of Additive Manufacturing (AM) highlight the capability to
become an inherent part within the product development process. However, process
specific challenges harm its further currency for industrial applications, for
instance the high geometrical deviations. Different process factors influence
the manufacturing accuracy and lead to large dimensional, form and positional
deviations. Published research relative to deviations is difficult to compare,
because it is based on several specimens that were manufactured with different
processes, materials and machine settings. This fact emphasizes that reliable
tolerance values for AM are hard to define in standards. Within this investigation,
a universally applicable method was developed to examine geometrical deviations
for AM processes. The main aim is the derivation of achievable tolerance values
considering important influencing factors. Furthermore, due to the locally varying
surface roughness of additively manufactured parts several tactile measurements
were compared.
author:
- first_name: Tobias
full_name: Lieneke, Tobias
id: '13956'
last_name: Lieneke
- first_name: Stefan
full_name: Lammers, Stefan
id: '13835'
last_name: Lammers
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: 'Lieneke T, Lammers S, Zimmer D. Geometrical Deviations In Additive Manufacturing
-- Influences On The Manufacturing Accuracy. In: 32nd Annual International
Virtual Solid Freeform Fabrication (SFF) Symposium . ; 2021. doi:http://dx.doi.org/10.26153/tsw/17565'
apa: Lieneke, T., Lammers, S., & Zimmer, D. (2021). Geometrical Deviations In
Additive Manufacturing -- Influences On The Manufacturing Accuracy. 32nd Annual
International Virtual Solid Freeform Fabrication (SFF) Symposium . 32nd Annual
International Virtual Solid Freeform Fabrication (SFF) Symposium , Austin, Texas,
USA. http://dx.doi.org/10.26153/tsw/17565
bibtex: '@inproceedings{Lieneke_Lammers_Zimmer_2021, title={Geometrical Deviations
In Additive Manufacturing -- Influences On The Manufacturing Accuracy}, DOI={http://dx.doi.org/10.26153/tsw/17565},
booktitle={32nd Annual International Virtual Solid Freeform Fabrication (SFF)
Symposium }, author={Lieneke, Tobias and Lammers, Stefan and Zimmer, Detmar},
year={2021} }'
chicago: Lieneke, Tobias, Stefan Lammers, and Detmar Zimmer. “Geometrical Deviations
In Additive Manufacturing -- Influences On The Manufacturing Accuracy.” In 32nd
Annual International Virtual Solid Freeform Fabrication (SFF) Symposium ,
2021. http://dx.doi.org/10.26153/tsw/17565.
ieee: 'T. Lieneke, S. Lammers, and D. Zimmer, “Geometrical Deviations In Additive
Manufacturing -- Influences On The Manufacturing Accuracy,” presented at the 32nd
Annual International Virtual Solid Freeform Fabrication (SFF) Symposium , Austin,
Texas, USA, 2021, doi: http://dx.doi.org/10.26153/tsw/17565.'
mla: Lieneke, Tobias, et al. “Geometrical Deviations In Additive Manufacturing --
Influences On The Manufacturing Accuracy.” 32nd Annual International Virtual
Solid Freeform Fabrication (SFF) Symposium , 2021, doi:http://dx.doi.org/10.26153/tsw/17565.
short: 'T. Lieneke, S. Lammers, D. Zimmer, in: 32nd Annual International Virtual
Solid Freeform Fabrication (SFF) Symposium , 2021.'
conference:
location: Austin, Texas, USA
name: '32nd Annual International Virtual Solid Freeform Fabrication (SFF) Symposium '
date_created: 2022-08-11T12:39:25Z
date_updated: 2022-08-11T12:39:54Z
department:
- _id: '146'
doi: http://dx.doi.org/10.26153/tsw/17565
language:
- iso: eng
publication: '32nd Annual International Virtual Solid Freeform Fabrication (SFF) Symposium '
publication_status: published
status: public
title: Geometrical Deviations In Additive Manufacturing -- Influences On The Manufacturing
Accuracy
type: conference
user_id: '13956'
year: '2021'
...
---
_id: '23880'
author:
- first_name: Stefan
full_name: Lammers, Stefan
id: '13835'
last_name: Lammers
- first_name: Tobias
full_name: Lieneke, Tobias
id: '13956'
last_name: Lieneke
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: 'Lammers S, Lieneke T, Zimmer D. Development of a Method to Derive Design Guidelines
for Production-suitable Support Structures in Metal Laser Powder Bed Fusion. In:
; 2021.'
apa: Lammers, S., Lieneke, T., & Zimmer, D. (2021). Development of a Method
to Derive Design Guidelines for Production-suitable Support Structures in Metal
Laser Powder Bed Fusion.
bibtex: '@inproceedings{Lammers_Lieneke_Zimmer_2021, place={Austin, Texas}, title={Development
of a Method to Derive Design Guidelines for Production-suitable Support Structures
in Metal Laser Powder Bed Fusion}, author={Lammers, Stefan and Lieneke, Tobias
and Zimmer, Detmar}, year={2021} }'
chicago: Lammers, Stefan, Tobias Lieneke, and Detmar Zimmer. “Development of a Method
to Derive Design Guidelines for Production-Suitable Support Structures in Metal
Laser Powder Bed Fusion.” Austin, Texas, 2021.
ieee: S. Lammers, T. Lieneke, and D. Zimmer, “Development of a Method to Derive
Design Guidelines for Production-suitable Support Structures in Metal Laser Powder
Bed Fusion,” 2021.
mla: Lammers, Stefan, et al. Development of a Method to Derive Design Guidelines
for Production-Suitable Support Structures in Metal Laser Powder Bed Fusion.
2021.
short: 'S. Lammers, T. Lieneke, D. Zimmer, in: Austin, Texas, 2021.'
date_created: 2021-09-07T12:20:49Z
date_updated: 2024-03-27T15:26:47Z
department:
- _id: '9'
language:
- iso: eng
place: Austin, Texas
quality_controlled: '1'
status: public
title: Development of a Method to Derive Design Guidelines for Production-suitable
Support Structures in Metal Laser Powder Bed Fusion
type: conference
user_id: '13956'
year: '2021'
...
---
_id: '22442'
abstract:
- lang: eng
text: 'Laser Beam Melting (LBM) is an Additive Manufacturing (AM) process on the
threshold of serial production. Therefore, LBM has to overcome different problems
such as a low productivity and minor economic efficiency. Support structures are
essential for LBM; however, these structures contribute to the mentioned topics,
because their removal is time consuming and cost intensive. To enable design engineers
and operators to increase the efficiency of LBM, design guidelinesfor support
structures suitable for post-processing are developed. For this purpose, the effect
of different design parameters on various evaluation criteria is considered. Suitability
for post-processing can be evaluated in terms of cost, quality and time. Therefore,
test specimens are built and parameter impacts on material consumption as well
as the post-processing time is examined. Furthermore, the roughness of the parts
is analyzed and used as an indicator for the removability of the support structure.
In addition, warpage is measured and the impact of the parameters on this criterion
is examined. Based on the results, suitable design guidelines and hints for support
structures are developed in order to reduce time and costs during manufacturing
and post-processing. '
author:
- first_name: Thomas
full_name: Künneke, Thomas
id: '13226'
last_name: Künneke
- first_name: Tobias
full_name: Lieneke, Tobias
id: '13956'
last_name: Lieneke
- first_name: Stefan
full_name: Lammers, Stefan
id: '13835'
last_name: Lammers
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: 'Künneke T, Lieneke T, Lammers S, Zimmer D. Design guidelines for post-processing
of laser beam melting in context of support structures. In: Proceedings of
the Special Interest Group Meeting on Advancing Precision in Additive Manufacturing.
; 2019:137-140. doi:https://www.euspen.eu/knowledge-base/AM19127.pdf'
apa: Künneke, T., Lieneke, T., Lammers, S., & Zimmer, D. (2019). Design guidelines
for post-processing of laser beam melting in context of support structures. In
Proceedings of the Special Interest Group meeting on Advancing Precision in
Additive Manufacturing (pp. 137–140). https://www.euspen.eu/knowledge-base/AM19127.pdf
bibtex: '@inproceedings{Künneke_Lieneke_Lammers_Zimmer_2019, title={Design guidelines
for post-processing of laser beam melting in context of support structures}, DOI={https://www.euspen.eu/knowledge-base/AM19127.pdf},
booktitle={Proceedings of the Special Interest Group meeting on Advancing Precision
in Additive Manufacturing}, author={Künneke, Thomas and Lieneke, Tobias and Lammers,
Stefan and Zimmer, Detmar}, year={2019}, pages={137–140} }'
chicago: Künneke, Thomas, Tobias Lieneke, Stefan Lammers, and Detmar Zimmer. “Design
Guidelines for Post-Processing of Laser Beam Melting in Context of Support Structures.”
In Proceedings of the Special Interest Group Meeting on Advancing Precision
in Additive Manufacturing, 137–40, 2019. https://www.euspen.eu/knowledge-base/AM19127.pdf.
ieee: T. Künneke, T. Lieneke, S. Lammers, and D. Zimmer, “Design guidelines for
post-processing of laser beam melting in context of support structures,” in Proceedings
of the Special Interest Group meeting on Advancing Precision in Additive Manufacturing,
2019, pp. 137–140.
mla: Künneke, Thomas, et al. “Design Guidelines for Post-Processing of Laser Beam
Melting in Context of Support Structures.” Proceedings of the Special Interest
Group Meeting on Advancing Precision in Additive Manufacturing, 2019, pp.
137–40, doi:https://www.euspen.eu/knowledge-base/AM19127.pdf.
short: 'T. Künneke, T. Lieneke, S. Lammers, D. Zimmer, in: Proceedings of the Special
Interest Group Meeting on Advancing Precision in Additive Manufacturing, 2019,
pp. 137–140.'
date_created: 2021-06-15T11:10:16Z
date_updated: 2022-01-06T06:55:33Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: https://www.euspen.eu/knowledge-base/AM19127.pdf
language:
- iso: eng
page: 137-140
publication: Proceedings of the Special Interest Group meeting on Advancing Precision
in Additive Manufacturing
status: public
title: Design guidelines for post-processing of laser beam melting in context of support
structures
type: conference
user_id: '38077'
year: '2019'
...
---
_id: '22441'
abstract:
- lang: eng
text: According to ISO / ASTM 52900, additive manufacturing (AM) is defined as "the
process of joining materials to make parts from 3D model data, usually layer upon
layer, as opposed to conventional manufacturing including subtractive manufacturing
technologies and formative manufacturing methodologies” [1]. This results in significant
advantages over conventional manufacturing methodologies, such as the production
of topologically optimized, complex structures, lower material consumption or
shorter product development cycles. In order to be able to use these advantages,
the possibilities and restrictions of the processes must be known. In particular,
selective laser beam melting (SLM), in which a powdery metallic starting material
is melted by means of a laser, requires a sound understanding of the process.
For this purpose, design guidelines have been presented in various scientific
papers. These design guidelines help to design a component in such a way that
it can be manufactured successfully using additive manufacturing. These so-called
“AMsuitable design guidelines” can be found among others at Adam, Kranz and Thomas
[2,3,4,5]. In contrast to established manufacturing processes, the post-processing
of additive components is divided into two steps. First, the AM immanent post
processing, such as the removing of the component from the building platform or
the removing of the remaining powder. These post-processing steps are in the following
referred to “post-processing”. Secondly, the subsequent post-processing steps
to improve the component properties, such as milling and turning or a stress-relief
annealing. These are referred to as “finishing” and form the focus of this paper.
With regard to a successful finishing of additively manufactured components, design
guidelines must be taken into account that consider the finishing inherent restrictions
and possibilities. In the following, these design guidelines are referred to “finishing
suitable”. They can deviate significantly from those of conventionally manufactured
components in the case of additively manufactured components. Although there are
some investigations that deal with the post-processing of additively manufactured
components [6,7], there are hardly any design guidelines that are suitable for
finishing [8]. Therefore, knowledge about the finishing of additively manufactured
components is based on experimental experience rather than on scientific knowledge.
For this reason, design guidelines for a finishing suitable design must be methodically
determined and quantified. These quantified design guidelines can be used for
an automated design check on complex components like topology optimized geometries.
author:
- first_name: Stefan
full_name: Lammers, Stefan
id: '13835'
last_name: Lammers
- first_name: Johannes
full_name: Tominski, Johannes
last_name: Tominski
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: 'Lammers S, Tominski J, Zimmer D. Guidelines for post processing oriented design
of additive manufactured parts for use in topology optimization. In: II International
Conference on Simulation for Additive Manufacturing Sim-AM 2019 11-13 September,
2019. ; 2019:174-185. doi:http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf'
apa: Lammers, S., Tominski, J., & Zimmer, D. (2019). Guidelines for post processing
oriented design of additive manufactured parts for use in topology optimization.
II International Conference on Simulation for Additive Manufacturing Sim-AM
2019 11-13 September, 2019, 174–185. http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf
bibtex: '@inproceedings{Lammers_Tominski_Zimmer_2019, title={Guidelines for post
processing oriented design of additive manufactured parts for use in topology
optimization}, DOI={http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf},
booktitle={II International Conference on Simulation for Additive Manufacturing
Sim-AM 2019 11-13 September, 2019}, author={Lammers, Stefan and Tominski, Johannes
and Zimmer, Detmar}, year={2019}, pages={174–185} }'
chicago: Lammers, Stefan, Johannes Tominski, and Detmar Zimmer. “Guidelines for
Post Processing Oriented Design of Additive Manufactured Parts for Use in Topology
Optimization.” In II International Conference on Simulation for Additive Manufacturing
Sim-AM 2019 11-13 September, 2019, 174–85, 2019. http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf.
ieee: 'S. Lammers, J. Tominski, and D. Zimmer, “Guidelines for post processing oriented
design of additive manufactured parts for use in topology optimization,” in II
International Conference on Simulation for Additive Manufacturing Sim-AM 2019
11-13 September, 2019, 2019, pp. 174–185, doi: http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf.'
mla: Lammers, Stefan, et al. “Guidelines for Post Processing Oriented Design of
Additive Manufactured Parts for Use in Topology Optimization.” II International
Conference on Simulation for Additive Manufacturing Sim-AM 2019 11-13 September,
2019, 2019, pp. 174–85, doi:http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf.
short: 'S. Lammers, J. Tominski, D. Zimmer, in: II International Conference on Simulation
for Additive Manufacturing Sim-AM 2019 11-13 September, 2019, 2019, pp. 174–185.'
date_created: 2021-06-15T11:10:15Z
date_updated: 2023-05-04T07:26:59Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf
language:
- iso: eng
page: 174-185
publication: II International Conference on Simulation for Additive Manufacturing
Sim-AM 2019 11-13 September, 2019
publication_identifier:
isbn:
- 978-84-949194-8-0
quality_controlled: '1'
status: public
title: Guidelines for post processing oriented design of additive manufactured parts
for use in topology optimization
type: conference
user_id: '13835'
year: '2019'
...
---
_id: '24105'
author:
- first_name: Stefan
full_name: Urbanek, Stefan
last_name: Urbanek
- first_name: Bernd
full_name: Ponick, Bernd
last_name: Ponick
- first_name: Alexander
full_name: Taube, Alexander
last_name: Taube
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
- first_name: Stefan
full_name: Lammers, Stefan
id: '13835'
last_name: Lammers
- first_name: Tobias
full_name: Lieneke, Tobias
id: '13956'
last_name: Lieneke
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: 'Urbanek S, Ponick B, Taube A, et al. Additive Manufacturing of a Soft Magnetic
Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine. In: 2018
IEEE Transportation Electrification Conference and Expo (ITEC). ; 2018. doi:10.1109/itec.2018.8450250'
apa: Urbanek, S., Ponick, B., Taube, A., Hoyer, K.-P., Schaper, M., Lammers, S.,
Lieneke, T., & Zimmer, D. (2018). Additive Manufacturing of a Soft Magnetic
Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine. 2018
IEEE Transportation Electrification Conference and Expo (ITEC). https://doi.org/10.1109/itec.2018.8450250
bibtex: '@inproceedings{Urbanek_Ponick_Taube_Hoyer_Schaper_Lammers_Lieneke_Zimmer_2018,
title={Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for
a Permanent Magnet Synchronous Machine}, DOI={10.1109/itec.2018.8450250},
booktitle={2018 IEEE Transportation Electrification Conference and Expo (ITEC)},
author={Urbanek, Stefan and Ponick, Bernd and Taube, Alexander and Hoyer, Kay-Peter
and Schaper, Mirko and Lammers, Stefan and Lieneke, Tobias and Zimmer, Detmar},
year={2018} }'
chicago: Urbanek, Stefan, Bernd Ponick, Alexander Taube, Kay-Peter Hoyer, Mirko
Schaper, Stefan Lammers, Tobias Lieneke, and Detmar Zimmer. “Additive Manufacturing
of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous
Machine.” In 2018 IEEE Transportation Electrification Conference and Expo (ITEC),
2018. https://doi.org/10.1109/itec.2018.8450250.
ieee: 'S. Urbanek et al., “Additive Manufacturing of a Soft Magnetic Rotor
Active Part and Shaft for a Permanent Magnet Synchronous Machine,” 2018, doi:
10.1109/itec.2018.8450250.'
mla: Urbanek, Stefan, et al. “Additive Manufacturing of a Soft Magnetic Rotor Active
Part and Shaft for a Permanent Magnet Synchronous Machine.” 2018 IEEE Transportation
Electrification Conference and Expo (ITEC), 2018, doi:10.1109/itec.2018.8450250.
short: 'S. Urbanek, B. Ponick, A. Taube, K.-P. Hoyer, M. Schaper, S. Lammers, T.
Lieneke, D. Zimmer, in: 2018 IEEE Transportation Electrification Conference and
Expo (ITEC), 2018.'
date_created: 2021-09-10T07:14:31Z
date_updated: 2022-01-06T06:56:07Z
department:
- _id: '9'
- _id: '158'
- _id: '146'
doi: 10.1109/itec.2018.8450250
language:
- iso: eng
publication: 2018 IEEE Transportation Electrification Conference and Expo (ITEC)
publication_status: published
status: public
title: Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a
Permanent Magnet Synchronous Machine
type: conference
user_id: '48411'
year: '2018'
...
---
_id: '22430'
author:
- first_name: Stefan
full_name: Urbanek, Stefan
last_name: Urbanek
- first_name: Bernd
full_name: Ponick, Bernd
last_name: Ponick
- first_name: Alexander
full_name: Taube, Alexander
last_name: Taube
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
last_name: Hoyer
- first_name: Mirko
full_name: Schaper, Mirko
last_name: Schaper
- first_name: Stefan
full_name: Lammers, Stefan
id: '13835'
last_name: Lammers
- first_name: Tobias
full_name: Lieneke, Tobias
id: '13956'
last_name: Lieneke
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: 'Urbanek S, Ponick B, Taube A, et al. Additive Manufacturing of a Soft Magnetic
Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine. In: Conference
Paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni
2018, DOI: 10.1109/ITEC.2018.8450250. ; 2018.'
apa: 'Urbanek, S., Ponick, B., Taube, A., Hoyer, K.-P., Schaper, M., Lammers, S.,
… Zimmer, D. (2018). Additive Manufacturing of a Soft Magnetic Rotor Active Part
and Shaft for a Permanent Magnet Synchronous Machine. In Conference paper,
2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018,
DOI: 10.1109/ITEC.2018.8450250.'
bibtex: '@inproceedings{Urbanek_Ponick_Taube_Hoyer_Schaper_Lammers_Lieneke_Zimmer_2018,
title={Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for
a Permanent Magnet Synchronous Machine}, booktitle={Conference paper, 2018 IEEE
Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250},
author={Urbanek, Stefan and Ponick, Bernd and Taube, Alexander and Hoyer, Kay-Peter
and Schaper, Mirko and Lammers, Stefan and Lieneke, Tobias and Zimmer, Detmar},
year={2018} }'
chicago: 'Urbanek, Stefan, Bernd Ponick, Alexander Taube, Kay-Peter Hoyer, Mirko
Schaper, Stefan Lammers, Tobias Lieneke, and Detmar Zimmer. “Additive Manufacturing
of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous
Machine.” In Conference Paper, 2018 IEEE Transportation Electrification Conference
and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250, 2018.'
ieee: 'S. Urbanek et al., “Additive Manufacturing of a Soft Magnetic Rotor
Active Part and Shaft for a Permanent Magnet Synchronous Machine,” in Conference
paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni
2018, DOI: 10.1109/ITEC.2018.8450250, 2018.'
mla: 'Urbanek, Stefan, et al. “Additive Manufacturing of a Soft Magnetic Rotor Active
Part and Shaft for a Permanent Magnet Synchronous Machine.” Conference Paper,
2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018,
DOI: 10.1109/ITEC.2018.8450250, 2018.'
short: 'S. Urbanek, B. Ponick, A. Taube, K.-P. Hoyer, M. Schaper, S. Lammers, T.
Lieneke, D. Zimmer, in: Conference Paper, 2018 IEEE Transportation Electrification
Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250, 2018.'
date_created: 2021-06-15T11:10:02Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
language:
- iso: eng
publication: 'Conference paper, 2018 IEEE Transportation Electrification Conference
and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250'
status: public
title: Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a
Permanent Magnet Synchronous Machine
type: conference
user_id: '38077'
year: '2018'
...
---
_id: '22433'
author:
- first_name: Johannes
full_name: Tominski, Johannes
last_name: Tominski
- first_name: Stefan
full_name: Lammers, Stefan
id: '13835'
last_name: Lammers
citation:
ama: 'Tominski J, Lammers S. Software-assisted design check of additive manufactured
components. In: 14th PERMAS Users’ Conference. Vol 14. ; 2018. doi:https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted'
apa: Tominski, J., & Lammers, S. (2018). Software-assisted design check of additive
manufactured components. In 14th PERMAS Users’ Conference (Vol. 14). https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted
bibtex: '@inproceedings{Tominski_Lammers_2018, title={Software-assisted design check
of additive manufactured components}, volume={14}, DOI={https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted},
booktitle={14th PERMAS Users’ Conference}, author={Tominski, Johannes and Lammers,
Stefan}, year={2018} }'
chicago: Tominski, Johannes, and Stefan Lammers. “Software-Assisted Design Check
of Additive Manufactured Components.” In 14th PERMAS Users’ Conference,
Vol. 14, 2018. https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted.
ieee: J. Tominski and S. Lammers, “Software-assisted design check of additive manufactured
components,” in 14th PERMAS Users’ Conference, 2018, vol. 14.
mla: Tominski, Johannes, and Stefan Lammers. “Software-Assisted Design Check of
Additive Manufactured Components.” 14th PERMAS Users’ Conference, vol.
14, 2018, doi:https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted.
short: 'J. Tominski, S. Lammers, in: 14th PERMAS Users’ Conference, 2018.'
date_created: 2021-06-15T11:10:05Z
date_updated: 2022-01-06T06:55:33Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted
intvolume: ' 14'
language:
- iso: eng
publication: 14th PERMAS Users' Conference
publication_identifier:
isbn:
- 978-3-926494-18-4
status: public
title: Software-assisted design check of additive manufactured components
type: conference
user_id: '38077'
volume: 14
year: '2018'
...
---
_id: '22434'
abstract:
- lang: eng
text: This paper reports on the experimental development and the theoretical analysis
of the scanning laser epitaxy (SLE) process that is currently being investigated
and developed at the Georgia Institute of Technology. SLE is a laser-based manufacturing
process for deposition of equiaxed, directionally solidified and single-crystal
nickel superalloys onto superalloy substrates through the selective melting and
re-solidification of superalloy powders. The thermal modeling of the system, done
in a commercial CFD software package, simulates a heat source moving over a powder
bed and considers the approximate change in the property values for consolidating
CMSX-4 nickel superalloy powder. The theoretical melt depth is obtained from the
melting temperature criteria and the resulting plots are presented alongside matching
experimental micrographs obtained through cross-sectional metallography. The influence
of the processing parameters on the microstructural evolution, as evidenced through
observations made from the micrographs, is discussed. This work is sponsored by
the Office of Naval Research, through grants N00173-07-1-G031 and N00014-10-1-0526.
author:
- first_name: Johannes
full_name: Tominski, Johannes
last_name: Tominski
- first_name: Stefan
full_name: Lammers, Stefan
id: '13835'
last_name: Lammers
- first_name: Christian
full_name: Wulf, Christian
last_name: Wulf
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: 'Tominski J, Lammers S, Wulf C, Zimmer D. Method for a Software-based Design
Check of Additively Manufactured Components. In: 29th Annual International
Solid Freeform Fabrication Symposium. Vol 29. ; 2018. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf'
apa: Tominski, J., Lammers, S., Wulf, C., & Zimmer, D. (2018). Method for a
Software-based Design Check of Additively Manufactured Components. In 29th
Annual International Solid Freeform Fabrication Symposium (Vol. 29). http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf
bibtex: '@inproceedings{Tominski_Lammers_Wulf_Zimmer_2018, title={Method for a Software-based
Design Check of Additively Manufactured Components}, volume={29}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf},
booktitle={29th Annual International Solid Freeform Fabrication Symposium}, author={Tominski,
Johannes and Lammers, Stefan and Wulf, Christian and Zimmer, Detmar}, year={2018}
}'
chicago: Tominski, Johannes, Stefan Lammers, Christian Wulf, and Detmar Zimmer.
“Method for a Software-Based Design Check of Additively Manufactured Components.”
In 29th Annual International Solid Freeform Fabrication Symposium, Vol.
29, 2018. http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf.
ieee: J. Tominski, S. Lammers, C. Wulf, and D. Zimmer, “Method for a Software-based
Design Check of Additively Manufactured Components,” in 29th Annual International
Solid Freeform Fabrication Symposium, 2018, vol. 29.
mla: Tominski, Johannes, et al. “Method for a Software-Based Design Check of Additively
Manufactured Components.” 29th Annual International Solid Freeform Fabrication
Symposium, vol. 29, 2018, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf.
short: 'J. Tominski, S. Lammers, C. Wulf, D. Zimmer, in: 29th Annual International
Solid Freeform Fabrication Symposium, 2018.'
date_created: 2021-06-15T11:10:06Z
date_updated: 2022-01-06T06:55:33Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf
intvolume: ' 29'
language:
- iso: eng
publication: 29th Annual International Solid Freeform Fabrication Symposium
status: public
title: Method for a Software-based Design Check of Additively Manufactured Components
type: conference
user_id: '38077'
volume: 29
year: '2018'
...
---
_id: '41526'
author:
- first_name: Stefan
full_name: Urbanek, Stefan
last_name: Urbanek
- first_name: Bernd
full_name: Ponick, Bernd
last_name: Ponick
- first_name: Alexander
full_name: Taube, Alexander
last_name: Taube
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
- first_name: Stefan
full_name: Lammers, Stefan
id: '13835'
last_name: Lammers
- first_name: Tobias
full_name: Lieneke, Tobias
id: '13956'
last_name: Lieneke
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: 'Urbanek S, Ponick B, Taube A, et al. Additive Manufacturing of a Soft Magnetic
Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine. In: 2018
IEEE Transportation Electrification Conference and Expo (ITEC). IEEE; 2018.
doi:10.1109/itec.2018.8450250'
apa: Urbanek, S., Ponick, B., Taube, A., Hoyer, K.-P., Schaper, M., Lammers, S.,
Lieneke, T., & Zimmer, D. (2018). Additive Manufacturing of a Soft Magnetic
Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine. 2018
IEEE Transportation Electrification Conference and Expo (ITEC). https://doi.org/10.1109/itec.2018.8450250
bibtex: '@inproceedings{Urbanek_Ponick_Taube_Hoyer_Schaper_Lammers_Lieneke_Zimmer_2018,
title={Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for
a Permanent Magnet Synchronous Machine}, DOI={10.1109/itec.2018.8450250},
booktitle={2018 IEEE Transportation Electrification Conference and Expo (ITEC)},
publisher={IEEE}, author={Urbanek, Stefan and Ponick, Bernd and Taube, Alexander
and Hoyer, Kay-Peter and Schaper, Mirko and Lammers, Stefan and Lieneke, Tobias
and Zimmer, Detmar}, year={2018} }'
chicago: Urbanek, Stefan, Bernd Ponick, Alexander Taube, Kay-Peter Hoyer, Mirko
Schaper, Stefan Lammers, Tobias Lieneke, and Detmar Zimmer. “Additive Manufacturing
of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous
Machine.” In 2018 IEEE Transportation Electrification Conference and Expo (ITEC).
IEEE, 2018. https://doi.org/10.1109/itec.2018.8450250.
ieee: 'S. Urbanek et al., “Additive Manufacturing of a Soft Magnetic Rotor
Active Part and Shaft for a Permanent Magnet Synchronous Machine,” 2018, doi:
10.1109/itec.2018.8450250.'
mla: Urbanek, Stefan, et al. “Additive Manufacturing of a Soft Magnetic Rotor Active
Part and Shaft for a Permanent Magnet Synchronous Machine.” 2018 IEEE Transportation
Electrification Conference and Expo (ITEC), IEEE, 2018, doi:10.1109/itec.2018.8450250.
short: 'S. Urbanek, B. Ponick, A. Taube, K.-P. Hoyer, M. Schaper, S. Lammers, T.
Lieneke, D. Zimmer, in: 2018 IEEE Transportation Electrification Conference and
Expo (ITEC), IEEE, 2018.'
date_created: 2023-02-02T14:45:45Z
date_updated: 2024-03-27T15:27:12Z
department:
- _id: '9'
- _id: '158'
- _id: '146'
doi: 10.1109/itec.2018.8450250
language:
- iso: eng
publication: 2018 IEEE Transportation Electrification Conference and Expo (ITEC)
publication_status: published
publisher: IEEE
quality_controlled: '1'
status: public
title: Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a
Permanent Magnet Synchronous Machine
type: conference
user_id: '13956'
year: '2018'
...
---
_id: '22438'
abstract:
- lang: eng
text: Neue Konstruktionsabläufe und Potentiale bei der Gestaltung additiv hergestellter
Bauteile verlangen insbesondere im Konstruktionsprozess ein Umdenken. Fehlende
Kenntnisse über die additive Fertigungstechnologie hemmen zusätzlich dieses Umdenken
[HHD06, WC15]. Um die verhältnismäßig neue Fertigungstechnologie zugänglicher
zu machen, wurden in den letzten Jahren verschiedene Konstruktionsempfehlungen
erarbeitet. Die Vielzahl an Empfehlungen erschwert dem Konstrukteur allerdings
einen entsprechenden Überblick zu behalten und für ihn relevante von nicht relevanten
Empfehlungen zu sondieren. Aus diesem Grund wurden öffentlich zugängliche Empfehlungen
für das Laser-Strahlschmelzen zusammengetragen und einer Priorisierung unterzogen.
Das Ergebnis beinhaltet Konstruktionsempfehlungen, die einen relevanten Einfluss
auf die Bauteilfertigung, die Bauteilqualität und -funktion haben. Durch Abstraktion
dieser Empfehlungen konnten Richtlinien erarbeitet werden, die für eine softwareseitige
Gestaltprüfung verwendet werden können. Durch diese Gestaltprüfung können Bauteile
beliebiger Komplexität, zum Beispiel feine Gitter oder topologieoptimierte Strukturen,
bereits vor der Fertigung hinsichtlich der Einhaltung relevanter Konstruktionsrichtlinien
überprüft werden. Der Gestaltprüfer greift dabei auf eine Datenbank zurück, die
zulässige, quantitative Grenzwerte von Konstruktionsrichtlinien enthält. Diese
Grenzwerte werden im Folgenden Attributsausprägungen genannt und können experimentell
ermittelt werden. Hierfür wurden standardisierte Prüfkörperbaujobs entwickelt,
die alle notwendigen Prüfkörper zur Ermittlung der Attributsausprägungen enthalten
und deren Auswertung eine Erweiterung der Datenbank hinsichtlich
author:
- first_name: Stefan
full_name: Lammers, Stefan
id: '13835'
last_name: Lammers
- first_name: Johannes
full_name: Tominski, Johannes
last_name: Tominski
- first_name: Sebastian
full_name: Magerkohl, Sebastian
id: '28520'
last_name: Magerkohl
- first_name: Thomas
full_name: Künneke, Thomas
id: '13226'
last_name: Künneke
- first_name: Tobias
full_name: Lieneke, Tobias
id: '13956'
last_name: Lieneke
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: 'Lammers S, Tominski J, Magerkohl S, Künneke T, Lieneke T, Zimmer D. Konstruktionsrichtlinien
für eine softwaregestützte Anpassung von additiv gefertigten Bauteilen im Hinblick
auf eine robuste Fertigung. In: Proceedings of the 15th Rapid.Tech Conference.
; 2018:81-94. doi:https://doi.org/10.3139/9783446458123.005'
apa: Lammers, S., Tominski, J., Magerkohl, S., Künneke, T., Lieneke, T., & Zimmer,
D. (2018). Konstruktionsrichtlinien für eine softwaregestützte Anpassung von additiv
gefertigten Bauteilen im Hinblick auf eine robuste Fertigung. Proceedings of
the 15th Rapid.Tech Conference, 81–94. https://doi.org/10.3139/9783446458123.005
bibtex: '@inproceedings{Lammers_Tominski_Magerkohl_Künneke_Lieneke_Zimmer_2018,
title={Konstruktionsrichtlinien für eine softwaregestützte Anpassung von additiv
gefertigten Bauteilen im Hinblick auf eine robuste Fertigung}, DOI={https://doi.org/10.3139/9783446458123.005},
booktitle={Proceedings of the 15th Rapid.Tech Conference}, author={Lammers, Stefan
and Tominski, Johannes and Magerkohl, Sebastian and Künneke, Thomas and Lieneke,
Tobias and Zimmer, Detmar}, year={2018}, pages={81–94} }'
chicago: Lammers, Stefan, Johannes Tominski, Sebastian Magerkohl, Thomas Künneke,
Tobias Lieneke, and Detmar Zimmer. “Konstruktionsrichtlinien Für Eine Softwaregestützte
Anpassung von Additiv Gefertigten Bauteilen Im Hinblick Auf Eine Robuste Fertigung.”
In Proceedings of the 15th Rapid.Tech Conference, 81–94, 2018. https://doi.org/10.3139/9783446458123.005.
ieee: 'S. Lammers, J. Tominski, S. Magerkohl, T. Künneke, T. Lieneke, and D. Zimmer,
“Konstruktionsrichtlinien für eine softwaregestützte Anpassung von additiv gefertigten
Bauteilen im Hinblick auf eine robuste Fertigung,” in Proceedings of the 15th
Rapid.Tech Conference, 2018, pp. 81–94, doi: https://doi.org/10.3139/9783446458123.005.'
mla: Lammers, Stefan, et al. “Konstruktionsrichtlinien Für Eine Softwaregestützte
Anpassung von Additiv Gefertigten Bauteilen Im Hinblick Auf Eine Robuste Fertigung.”
Proceedings of the 15th Rapid.Tech Conference, 2018, pp. 81–94, doi:https://doi.org/10.3139/9783446458123.005.
short: 'S. Lammers, J. Tominski, S. Magerkohl, T. Künneke, T. Lieneke, D. Zimmer,
in: Proceedings of the 15th Rapid.Tech Conference, 2018, pp. 81–94.'
date_created: 2021-06-15T11:10:11Z
date_updated: 2023-05-04T07:26:09Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: https://doi.org/10.3139/9783446458123.005
language:
- iso: eng
page: 81-94
publication: Proceedings of the 15th Rapid.Tech Conference
publication_identifier:
isbn:
- 978-3-446-45812-3
quality_controlled: '1'
status: public
title: Konstruktionsrichtlinien für eine softwaregestützte Anpassung von additiv gefertigten
Bauteilen im Hinblick auf eine robuste Fertigung
type: conference
user_id: '13835'
year: '2018'
...
---
_id: '22431'
abstract:
- lang: eng
text: The design of additively manufactured components requires a rethinking in
the design process. This is inhibited by a lack of knowledge about additive manufacturing
technologies. For this reason, a large number of design guidelines have been developed
in recent years. In their present form the design guidelines are not suitable
for processing in a software algorithm, since the guidelines have a certain redundancy
and partly influence each other. This paper describes several steps to consolidate
the existing guidelines and to prepare them in a way that they can be used in
a software algorithm for a design check. Therefore, existing guidelines are collected,
prioritized and quantified with regard to their relevance for a robust production.
To quantify the guidelines, test specimens are developed, produced and evaluated
in order to obtain a limit value for the geometric properties. With these limit
values, quantifiable design guidelines can be applied to designers and software
tools.
author:
- first_name: Stefan
full_name: Lammers, Stefan
id: '13835'
last_name: Lammers
- first_name: Johannes
full_name: Tominski, Johannes
last_name: Tominski
- first_name: Sebastian
full_name: Magerkohl, Sebastian
id: '28520'
last_name: Magerkohl
- first_name: Tobias
full_name: Lieneke, Tobias
id: '13956'
last_name: Lieneke
- first_name: Thomas
full_name: Künneke, Thomas
id: '13226'
last_name: Künneke
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: 'Lammers S, Tominski J, Magerkohl S, Lieneke T, Künneke T, Zimmer D. Design
Guidelines for a Software-supported Adaptation of Additively Manufactured Components
with Regard to a Robust Production. In: 29th Annual International Solid Freeform
Fabrication Symposium. Vol 29. ; 2018. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2018/046%20DesignGuidelinesforaSoftwareSupportedAdaptat.pdf'
apa: Lammers, S., Tominski, J., Magerkohl, S., Lieneke, T., Künneke, T., & Zimmer,
D. (2018). Design Guidelines for a Software-supported Adaptation of Additively
Manufactured Components with Regard to a Robust Production. 29th Annual International
Solid Freeform Fabrication Symposium, 29. http://utw10945.utweb.utexas.edu/sites/default/files/2018/046%20DesignGuidelinesforaSoftwareSupportedAdaptat.pdf
bibtex: '@inproceedings{Lammers_Tominski_Magerkohl_Lieneke_Künneke_Zimmer_2018,
title={Design Guidelines for a Software-supported Adaptation of Additively Manufactured
Components with Regard to a Robust Production}, volume={29}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2018/046%20DesignGuidelinesforaSoftwareSupportedAdaptat.pdf},
booktitle={29th Annual International Solid Freeform Fabrication Symposium}, author={Lammers,
Stefan and Tominski, Johannes and Magerkohl, Sebastian and Lieneke, Tobias and
Künneke, Thomas and Zimmer, Detmar}, year={2018} }'
chicago: Lammers, Stefan, Johannes Tominski, Sebastian Magerkohl, Tobias Lieneke,
Thomas Künneke, and Detmar Zimmer. “Design Guidelines for a Software-Supported
Adaptation of Additively Manufactured Components with Regard to a Robust Production.”
In 29th Annual International Solid Freeform Fabrication Symposium, Vol.
29, 2018. http://utw10945.utweb.utexas.edu/sites/default/files/2018/046%20DesignGuidelinesforaSoftwareSupportedAdaptat.pdf.
ieee: 'S. Lammers, J. Tominski, S. Magerkohl, T. Lieneke, T. Künneke, and D. Zimmer,
“Design Guidelines for a Software-supported Adaptation of Additively Manufactured
Components with Regard to a Robust Production,” in 29th Annual International
Solid Freeform Fabrication Symposium, 2018, vol. 29, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2018/046%20DesignGuidelinesforaSoftwareSupportedAdaptat.pdf.'
mla: Lammers, Stefan, et al. “Design Guidelines for a Software-Supported Adaptation
of Additively Manufactured Components with Regard to a Robust Production.” 29th
Annual International Solid Freeform Fabrication Symposium, vol. 29, 2018,
doi:http://utw10945.utweb.utexas.edu/sites/default/files/2018/046%20DesignGuidelinesforaSoftwareSupportedAdaptat.pdf.
short: 'S. Lammers, J. Tominski, S. Magerkohl, T. Lieneke, T. Künneke, D. Zimmer,
in: 29th Annual International Solid Freeform Fabrication Symposium, 2018.'
date_created: 2021-06-15T11:10:03Z
date_updated: 2023-05-04T07:27:40Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2018/046%20DesignGuidelinesforaSoftwareSupportedAdaptat.pdf
intvolume: ' 29'
language:
- iso: eng
publication: 29th Annual International Solid Freeform Fabrication Symposium
quality_controlled: '1'
status: public
title: Design Guidelines for a Software-supported Adaptation of Additively Manufactured
Components with Regard to a Robust Production
type: conference
user_id: '13835'
volume: 29
year: '2018'
...
---
_id: '22420'
abstract:
- lang: eng
text: 'Additive Fertigungsverfahren (engl.: Additive Manufacturing, kurz: AM) ermöglichen
die werkzeuglose Herstellung von Komponenten und kompletten Baugruppen direkt
aus dem 3D-CAD-Modell. Insbesondere additiv hergestellte Leichtbaukonstruktionen
weisen ein hohes Potential für den Elektromaschinenbau auf. In diesem Paper werden
erste Ansätze zur additiven Fertigung einer Rotorwelle für eine permanentmagneterregte
Synchronmaschine (PMSM) aufgezeigt. Die Verbesserung einer ausgeprägten Leichtbaukonstruktion
der Rotorwelle sowie die Charakterisierung des additiv verarbeiteten Werkstoffs
werden aufgeführt. Hierzu wurden Prüfkörper aus dem Werkstoffs H13 (1.2344) hergestellt.
Des Weiteren wurden Prüfkörper additiv gefertigter Gitterstrukturen entwickelt
und untersucht. Zur Werkstoffcharakterisierung wurden sowohl mechanische Eigenschaften
ermittelt, wie die Streckgrenze, die Zugfestigkeit und die Härte als auch elektromagnetische
Eigenschaften, wie die Koerzitivfeldstärke, die elektrische Leitfähigkeit und
die Permeabilität. Die Ergebnisse zeigen, dass die magnetischen Eigenschaften
von H13 durch eine angeschlossene Wärmebehandlung deutlich verbessert werden konnten.
Im Anschluss an die Werkstoffcharakterisierung wurde ein innovatives Leichtbau-Rotorwellenkonzept
mit internen Gitterstrukturen entwickelt. Verglichen mit einem konventionell gefertigten
Rotor konnte die Rotormasse um 25% reduziert werden sowie das Massenträgheitsmoment
um 23% reduziert werden bei einer Testdrehzahl von 3000 U/min und einem Drehmoment
von 71,98 Nm.'
author:
- first_name: Stefan
full_name: Lammers, Stefan
id: '13835'
last_name: Lammers
- first_name: Francesco
full_name: Quattrone, Francesco
last_name: Quattrone
- first_name: Rafael
full_name: Mrozek, Rafael
last_name: Mrozek
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
last_name: Schmid
- first_name: Bernd
full_name: Ponick, Bernd
last_name: Ponick
- first_name: Michael
full_name: Hoffmann, Michael
last_name: Hoffmann
citation:
ama: 'Lammers S, Quattrone F, Mrozek R, et al. Entwicklung und additive Herstellung
einer Leichtbau-Rotorwelle für eine permanentmagneterregte Synchronmaschine. In:
Proceedings of the 14th Rapid.Tech Conference. Hanser Verlag; 2017:80-93.
doi:10.3139/9783446454606.006'
apa: Lammers, S., Quattrone, F., Mrozek, R., Zimmer, D., Schmid, H.-J., Ponick,
B., & Hoffmann, M. (2017). Entwicklung und additive Herstellung einer Leichtbau-Rotorwelle
für eine permanentmagneterregte Synchronmaschine. In Proceedings of the 14th
Rapid.Tech Conference (pp. 80–93). Hanser Verlag. https://doi.org/10.3139/9783446454606.006
bibtex: '@inproceedings{Lammers_Quattrone_Mrozek_Zimmer_Schmid_Ponick_Hoffmann_2017,
title={Entwicklung und additive Herstellung einer Leichtbau-Rotorwelle für eine
permanentmagneterregte Synchronmaschine}, DOI={10.3139/9783446454606.006},
booktitle={Proceedings of the 14th Rapid.Tech Conference}, publisher={Hanser Verlag},
author={Lammers, Stefan and Quattrone, Francesco and Mrozek, Rafael and Zimmer,
Detmar and Schmid, Hans-Joachim and Ponick, Bernd and Hoffmann, Michael}, year={2017},
pages={80–93} }'
chicago: Lammers, Stefan, Francesco Quattrone, Rafael Mrozek, Detmar Zimmer, Hans-Joachim
Schmid, Bernd Ponick, and Michael Hoffmann. “Entwicklung Und Additive Herstellung
Einer Leichtbau-Rotorwelle Für Eine Permanentmagneterregte Synchronmaschine.”
In Proceedings of the 14th Rapid.Tech Conference, 80–93. Hanser Verlag,
2017. https://doi.org/10.3139/9783446454606.006.
ieee: S. Lammers et al., “Entwicklung und additive Herstellung einer Leichtbau-Rotorwelle
für eine permanentmagneterregte Synchronmaschine,” in Proceedings of the 14th
Rapid.Tech Conference, 2017, pp. 80–93.
mla: Lammers, Stefan, et al. “Entwicklung Und Additive Herstellung Einer Leichtbau-Rotorwelle
Für Eine Permanentmagneterregte Synchronmaschine.” Proceedings of the 14th
Rapid.Tech Conference, Hanser Verlag, 2017, pp. 80–93, doi:10.3139/9783446454606.006.
short: 'S. Lammers, F. Quattrone, R. Mrozek, D. Zimmer, H.-J. Schmid, B. Ponick,
M. Hoffmann, in: Proceedings of the 14th Rapid.Tech Conference, Hanser Verlag,
2017, pp. 80–93.'
date_created: 2021-06-15T11:09:50Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: 10.3139/9783446454606.006
language:
- iso: eng
page: 80-93
publication: Proceedings of the 14th Rapid.Tech Conference
publication_identifier:
isbn:
- 978-3-446-45459-0
publisher: Hanser Verlag
status: public
title: Entwicklung und additive Herstellung einer Leichtbau-Rotorwelle für eine permanentmagneterregte
Synchronmaschine
type: conference
user_id: '38077'
year: '2017'
...
---
_id: '23737'
author:
- first_name: Stefan
full_name: Lammers, Stefan
id: '13835'
last_name: Lammers
- first_name: Francesco
full_name: Quattrone, Francesco
last_name: Quattrone
- first_name: Rafael
full_name: Mrozek, Rafael
last_name: Mrozek
citation:
ama: Lammers S, Quattrone F, Mrozek R. Machbarkeitsstudie 3D Druck Elektromotoren.
Vol Nr. 1189. Forschungsvereinigung Antriebstechnik e.V.; 2016.
apa: 'Lammers, S., Quattrone, F., & Mrozek, R. (2016). Machbarkeitsstudie
3D Druck Elektromotoren: Vol. Nr. 1189. Forschungsvereinigung Antriebstechnik
e.V.'
bibtex: '@book{Lammers_Quattrone_Mrozek_2016, series={FVA Abschlussbericht }, title={Machbarkeitsstudie
3D Druck Elektromotoren}, volume={Nr. 1189}, publisher={Forschungsvereinigung
Antriebstechnik e.V.}, author={Lammers, Stefan and Quattrone, Francesco and Mrozek,
Rafael}, year={2016}, collection={FVA Abschlussbericht } }'
chicago: Lammers, Stefan, Francesco Quattrone, and Rafael Mrozek. Machbarkeitsstudie
3D Druck Elektromotoren. Vol. Nr. 1189. FVA Abschlussbericht . Forschungsvereinigung
Antriebstechnik e.V., 2016.
ieee: S. Lammers, F. Quattrone, and R. Mrozek, Machbarkeitsstudie 3D Druck Elektromotoren,
vol. Nr. 1189. Forschungsvereinigung Antriebstechnik e.V., 2016.
mla: Lammers, Stefan, et al. Machbarkeitsstudie 3D Druck Elektromotoren.
Forschungsvereinigung Antriebstechnik e.V., 2016.
short: S. Lammers, F. Quattrone, R. Mrozek, Machbarkeitsstudie 3D Druck Elektromotoren,
Forschungsvereinigung Antriebstechnik e.V., 2016.
date_created: 2021-09-03T10:35:33Z
date_updated: 2022-01-06T06:55:59Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
language:
- iso: ger
publication_status: published
publisher: Forschungsvereinigung Antriebstechnik e.V.
report_number: FVA 731 I
series_title: 'FVA Abschlussbericht '
status: public
title: Machbarkeitsstudie 3D Druck Elektromotoren
type: report
user_id: '13835'
volume: Nr. 1189
year: '2016'
...
---
_id: '22404'
abstract:
- lang: eng
text: Additive Manufacturing (AM), also known as 3D printing, is a relatively new
technology which enables the toolless production of components and entire assemblies
directly from a CAD file. Today, the technology is still not widely used in industrial
production. It is mainly limited to special applications, although it shows great
potential. In this paper, first approaches are shown to apply AM to the production
of rotors for permanent magnet synchronous machines (PMSM). The possibilities
of a lightweight design with a low moment of inertia as well as the influence
on the magnetic anisotropy for an improved sensorless control of PMSM are pointed
out. The results clearly demonstrate the great potential of additive manufacturing
in electrical engineering applications.
author:
- first_name: Stefan
full_name: Lammers, Stefan
id: '13835'
last_name: Lammers
- first_name: Guido
full_name: Adam, Guido
last_name: Adam
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
- first_name: Rafael
full_name: Mrozek, Rafael
last_name: Mrozek
- first_name: Rainer
full_name: Oberacker, Rainer
last_name: Oberacker
- first_name: Michael
full_name: Hoffmann, Michael
last_name: Hoffmann
- first_name: Francesco
full_name: Quattrone, Francesco
last_name: Quattrone
- first_name: Bernd
full_name: Ponick, Bernd
last_name: Ponick
citation:
ama: 'Lammers S, Adam G, Schmid H-J, et al. Additive Manufacturing of a Lightweight
Rotor for a Permanent Magnet Synchronous Machine. In: EDPC 2016. ; 2016.
doi:10.1109/EDPC.2016.7851312'
apa: Lammers, S., Adam, G., Schmid, H.-J., Mrozek, R., Oberacker, R., Hoffmann,
M., … Ponick, B. (2016). Additive Manufacturing of a Lightweight Rotor for a Permanent
Magnet Synchronous Machine. In EDPC 2016. https://doi.org/10.1109/EDPC.2016.7851312
bibtex: '@inproceedings{Lammers_Adam_Schmid_Mrozek_Oberacker_Hoffmann_Quattrone_Ponick_2016,
title={Additive Manufacturing of a Lightweight Rotor for a Permanent Magnet Synchronous
Machine}, DOI={10.1109/EDPC.2016.7851312},
booktitle={EDPC 2016}, author={Lammers, Stefan and Adam, Guido and Schmid, Hans-Joachim
and Mrozek, Rafael and Oberacker, Rainer and Hoffmann, Michael and Quattrone,
Francesco and Ponick, Bernd}, year={2016} }'
chicago: Lammers, Stefan, Guido Adam, Hans-Joachim Schmid, Rafael Mrozek, Rainer
Oberacker, Michael Hoffmann, Francesco Quattrone, and Bernd Ponick. “Additive
Manufacturing of a Lightweight Rotor for a Permanent Magnet Synchronous Machine.”
In EDPC 2016, 2016. https://doi.org/10.1109/EDPC.2016.7851312.
ieee: S. Lammers et al., “Additive Manufacturing of a Lightweight Rotor for
a Permanent Magnet Synchronous Machine,” in EDPC 2016, 2016.
mla: Lammers, Stefan, et al. “Additive Manufacturing of a Lightweight Rotor for
a Permanent Magnet Synchronous Machine.” EDPC 2016, 2016, doi:10.1109/EDPC.2016.7851312.
short: 'S. Lammers, G. Adam, H.-J. Schmid, R. Mrozek, R. Oberacker, M. Hoffmann,
F. Quattrone, B. Ponick, in: EDPC 2016, 2016.'
date_created: 2021-06-15T11:09:32Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: 10.1109/EDPC.2016.7851312
language:
- iso: eng
publication: EDPC 2016
publication_identifier:
isbn:
- 978-1-5090-2908-2
status: public
title: Additive Manufacturing of a Lightweight Rotor for a Permanent Magnet Synchronous
Machine
type: conference
user_id: '38077'
year: '2016'
...
---
_id: '15965'
abstract:
- lang: eng
text: Abstract
author:
- first_name: Stefan
full_name: Leuders, Stefan
last_name: Leuders
- first_name: Tobias
full_name: Lieneke, Tobias
id: '13956'
last_name: Lieneke
- first_name: Stefan
full_name: Lammers, Stefan
id: '13835'
last_name: Lammers
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Thomas
full_name: Niendorf, Thomas
last_name: Niendorf
citation:
ama: Leuders S, Lieneke T, Lammers S, Tröster T, Niendorf T. On the fatigue properties
of metals manufactured by selective laser melting – The role of ductility. Journal
of Materials Research. Published online 2014:1911-1919. doi:10.1557/jmr.2014.157
apa: Leuders, S., Lieneke, T., Lammers, S., Tröster, T., & Niendorf, T. (2014).
On the fatigue properties of metals manufactured by selective laser melting –
The role of ductility. Journal of Materials Research, 1911–1919. https://doi.org/10.1557/jmr.2014.157
bibtex: '@article{Leuders_Lieneke_Lammers_Tröster_Niendorf_2014, title={On the fatigue
properties of metals manufactured by selective laser melting – The role of ductility},
DOI={10.1557/jmr.2014.157},
journal={Journal of Materials Research}, author={Leuders, Stefan and Lieneke,
Tobias and Lammers, Stefan and Tröster, Thomas and Niendorf, Thomas}, year={2014},
pages={1911–1919} }'
chicago: Leuders, Stefan, Tobias Lieneke, Stefan Lammers, Thomas Tröster, and Thomas
Niendorf. “On the Fatigue Properties of Metals Manufactured by Selective Laser
Melting – The Role of Ductility.” Journal of Materials Research, 2014,
1911–19. https://doi.org/10.1557/jmr.2014.157.
ieee: 'S. Leuders, T. Lieneke, S. Lammers, T. Tröster, and T. Niendorf, “On the
fatigue properties of metals manufactured by selective laser melting – The role
of ductility,” Journal of Materials Research, pp. 1911–1919, 2014, doi:
10.1557/jmr.2014.157.'
mla: Leuders, Stefan, et al. “On the Fatigue Properties of Metals Manufactured by
Selective Laser Melting – The Role of Ductility.” Journal of Materials Research,
2014, pp. 1911–19, doi:10.1557/jmr.2014.157.
short: S. Leuders, T. Lieneke, S. Lammers, T. Tröster, T. Niendorf, Journal of Materials
Research (2014) 1911–1919.
date_created: 2020-02-21T14:40:39Z
date_updated: 2024-03-27T15:25:07Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
- _id: '146'
- _id: '219'
doi: 10.1557/jmr.2014.157
language:
- iso: eng
page: 1911-1919
publication: Journal of Materials Research
publication_identifier:
issn:
- 0884-2914
- 2044-5326
publication_status: published
status: public
title: On the fatigue properties of metals manufactured by selective laser melting
– The role of ductility
type: journal_article
user_id: '13956'
year: '2014'
...