@inproceedings{48357,
  author       = {{Moritzer, Elmar and Hecker, Felix and Knaup, Felix and Wächter, Julian}},
  booktitle    = {{Proceedings of the 37th International Conference of the Polymer Processing Society (PPS-37)}},
  location     = {{Fukuoka (Japan)}},
  pages        = {{170001--1 -- 170001--5}},
  publisher    = {{AIP Publishing}},
  title        = {{{Investigation of the Deposition Velocity Related Temperature Deviations for High Temperature Materials in the FDM Process}}},
  doi          = {{10.1063/5.0168548}},
  year         = {{2023}},
}

@article{33861,
  author       = {{Moritzer, Elmar and Wächter, Julian}},
  journal      = {{Macromolecular Symposia}},
  location     = {{Bukarest}},
  number       = {{1}},
  publisher    = {{Wiley}},
  title        = {{{Development of a Procedure for the Assessment of Material Potentials under Consideration of the Weld Seam Quality for Multi-Material Applications in the FDM Process}}},
  doi          = {{https://doi.org/10.1002/masy.202100389}},
  volume       = {{404}},
  year         = {{2022}},
}

@inproceedings{48354,
  author       = {{Moritzer, Elmar and Wächter, Julian}},
  location     = {{Fukuoka (Japan)}},
  title        = {{{Qualification of Different Carbon Fiber Reinforced Polyether Ether Ketone Materials for the FFF Process}}},
  year         = {{2022}},
}

@article{24168,
  author       = {{Moritzer, Elmar and Wächter, Julian}},
  issn         = {{0032-1338}},
  journal      = {{Plastverarbeiter}},
  number       = {{04}},
  pages        = {{30--32}},
  title        = {{{Einfluss eines beheizten Bauraums auf die Schweißnahtqualität}}},
  year         = {{2021}},
}

@article{24162,
  author       = {{Moritzer, Elmar and Wächter, Julian and Elsner, Christian Lennart}},
  journal      = {{Macromolecular Symposia}},
  number       = {{1}},
  publisher    = {{Wiley}},
  title        = {{{Investigation of Specific FDM Process Parameters to Optimize the Polymer Discharge of Carbon Fiber Reinforced PEEK}}},
  doi          = {{10.1002/masy.202000269}},
  volume       = {{395}},
  year         = {{2021}},
}

@inproceedings{24554,
  author       = {{Moritzer, Elmar and Elsner, Christian Lennart and Wächter, Julian and Knoop, Frederick}},
  booktitle    = {{79th Annual Technical Conference of the Society of Plastics Engineers (ANTEC)}},
  title        = {{{Investigation and Realization of Watertight FDM Structures Made of Ultem 9085 in Pressurized Systems}}},
  year         = {{2021}},
}

@inproceedings{31774,
  author       = {{Moritzer, Elmar and Wächter, Julian and Fuhrmann, C.}},
  booktitle    = {{23rd International Conference Materials}},
  isbn         = {{1314-7269}},
  location     = {{Burgas (Bulgarien)}},
  pages        = {{58-- 67}},
  title        = {{{ INVESTIGATION OF THE PROCESSABILITY OF DIFFERENT HIGHPERFORMANCE MATERIALS IN THE FDM PROCESS WITH REGARD TO THE SHRINKAGE BEHAVIOR}}},
  year         = {{2021}},
}

@inproceedings{24478,
  author       = {{Moritzer, Elmar and Wächter, Julian}},
  location     = {{Karlsruhe}},
  title        = {{{From filament production to material qualification for the FDM process}}},
  year         = {{2020}},
}

@inproceedings{22022,
  abstract     = {{Due to the great popularity of the Fused Deposition Modeling (FDM) process, the material market is growing. In particular, processing of high-temperature materials such as PEEK is demanding. The aim of the investigations is to test different PEEK materials regarding their processability in the FDM process. An unreinforced PEEK, a thermally conductive PEEK as well as a carbon fiber reinforced PEEK are investigated. The processability is assessed with the help of the weld seam strength. The assessment of the weld seam strength is carried out by building tests. For this purpose, a special method developed at the DMRC is used. In addition, a welding width factor between the strands deposited on each other is calculated and compared. Finally, a welding factor is determined to enable the comparison between the different materials. With this procedure, the influence of varying nozzle and build chamber temperatures on the achievable weld seam strengths is evaluated.}},
  author       = {{Moritzer, Elmar and Wächter, Julian and Elsner, M.}},
  booktitle    = {{30th Annual International Solid Freeform Fabrication Symposium}},
  pages        = {{856--863}},
  title        = {{{Investigation of the Processability of Different PEEK Materials in the FDM Process with Regard to the Weld Seam Strength}}},
  doi          = {{http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf}},
  volume       = {{30}},
  year         = {{2019}},
}