---
_id: '63616'
article_number: '104264'
author:
- first_name: Maik
full_name: Gude, Maik
last_name: Gude
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Wilko
full_name: Flügge, Wilko
last_name: Flügge
- first_name: Linda
full_name: Fröck, Linda
last_name: Fröck
- first_name: Christopher
full_name: Wald, Christopher
last_name: Wald
- first_name: Vanessa
full_name: Neßlinger, Vanessa
id: '54649'
last_name: Neßlinger
orcid: 0000-0001-9416-1646
- first_name: Karsten
full_name: Dobrindt-Tittmann, Karsten
last_name: Dobrindt-Tittmann
- first_name: Juliane
full_name: Troschitz, Juliane
last_name: Troschitz
- first_name: Fynn
full_name: Neubert, Fynn
last_name: Neubert
- first_name: Martin
full_name: Hofmann, Martin
last_name: Hofmann
- first_name: Richard
full_name: Ostwald, Richard
id: '106876'
last_name: Ostwald
orcid: 0000-0003-2147-8444
- first_name: Christian
full_name: Mathiszik, Christian
last_name: Mathiszik
- first_name: Hans Christian
full_name: Schmale, Hans Christian
last_name: Schmale
- first_name: Thomas
full_name: Wallmersperger, Thomas
last_name: Wallmersperger
- first_name: Guido
full_name: Grundmeier, Guido
id: '194'
last_name: Grundmeier
citation:
ama: 'Gude M, Meschut G, Flügge W, et al. Corrosion of adhesively bonded alloys
in maritime environments: A review. International Journal of Adhesion and Adhesives.
2026;147. doi:10.1016/j.ijadhadh.2026.104264'
apa: 'Gude, M., Meschut, G., Flügge, W., Fröck, L., Wald, C., Neßlinger, V., Dobrindt-Tittmann,
K., Troschitz, J., Neubert, F., Hofmann, M., Ostwald, R., Mathiszik, C., Schmale,
H. C., Wallmersperger, T., & Grundmeier, G. (2026). Corrosion of adhesively
bonded alloys in maritime environments: A review. International Journal of
Adhesion and Adhesives, 147, Article 104264. https://doi.org/10.1016/j.ijadhadh.2026.104264'
bibtex: '@article{Gude_Meschut_Flügge_Fröck_Wald_Neßlinger_Dobrindt-Tittmann_Troschitz_Neubert_Hofmann_et
al._2026, title={Corrosion of adhesively bonded alloys in maritime environments:
A review}, volume={147}, DOI={10.1016/j.ijadhadh.2026.104264},
number={104264}, journal={International Journal of Adhesion and Adhesives}, publisher={Elsevier
BV}, author={Gude, Maik and Meschut, Gerson and Flügge, Wilko and Fröck, Linda
and Wald, Christopher and Neßlinger, Vanessa and Dobrindt-Tittmann, Karsten and
Troschitz, Juliane and Neubert, Fynn and Hofmann, Martin and et al.}, year={2026}
}'
chicago: 'Gude, Maik, Gerson Meschut, Wilko Flügge, Linda Fröck, Christopher Wald,
Vanessa Neßlinger, Karsten Dobrindt-Tittmann, et al. “Corrosion of Adhesively
Bonded Alloys in Maritime Environments: A Review.” International Journal of
Adhesion and Adhesives 147 (2026). https://doi.org/10.1016/j.ijadhadh.2026.104264.'
ieee: 'M. Gude et al., “Corrosion of adhesively bonded alloys in maritime
environments: A review,” International Journal of Adhesion and Adhesives,
vol. 147, Art. no. 104264, 2026, doi: 10.1016/j.ijadhadh.2026.104264.'
mla: 'Gude, Maik, et al. “Corrosion of Adhesively Bonded Alloys in Maritime Environments:
A Review.” International Journal of Adhesion and Adhesives, vol. 147, 104264,
Elsevier BV, 2026, doi:10.1016/j.ijadhadh.2026.104264.'
short: M. Gude, G. Meschut, W. Flügge, L. Fröck, C. Wald, V. Neßlinger, K. Dobrindt-Tittmann,
J. Troschitz, F. Neubert, M. Hofmann, R. Ostwald, C. Mathiszik, H.C. Schmale,
T. Wallmersperger, G. Grundmeier, International Journal of Adhesion and Adhesives
147 (2026).
date_created: 2026-01-15T08:37:20Z
date_updated: 2026-01-15T08:43:07Z
doi: 10.1016/j.ijadhadh.2026.104264
intvolume: ' 147'
language:
- iso: eng
publication: International Journal of Adhesion and Adhesives
publication_identifier:
issn:
- 0143-7496
publication_status: published
publisher: Elsevier BV
status: public
title: 'Corrosion of adhesively bonded alloys in maritime environments: A review'
type: journal_article
user_id: '54649'
volume: 147
year: '2026'
...
---
_id: '64131'
author:
- first_name: Lucas
full_name: Hermelingmeier, Lucas
id: '58649'
last_name: Hermelingmeier
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Matthias
full_name: Korten, Matthias
last_name: Korten
- first_name: Peter
full_name: Urban, Peter
last_name: Urban
- first_name: Raphael
full_name: Marquardt, Raphael
last_name: Marquardt
- first_name: Michael
full_name: Rethmeier, Michael
last_name: Rethmeier
citation:
ama: 'Hermelingmeier L, Teutenberg D, Meschut G, et al. Konzeptentwicklung für eine
stahlintenisve zirkuläre und modulare Bauweise elektrisch angetriebener Fahrzeuge.
In: DECHEMA, ed. ; 2026.'
apa: Hermelingmeier, L., Teutenberg, D., Meschut, G., Korten, M., Urban, P., Marquardt,
R., & Rethmeier, M. (2026). Konzeptentwicklung für eine stahlintenisve
zirkuläre und modulare Bauweise elektrisch angetriebener Fahrzeuge (DECHEMA,
Ed.).
bibtex: '@inproceedings{Hermelingmeier_Teutenberg_Meschut_Korten_Urban_Marquardt_Rethmeier_2026,
title={Konzeptentwicklung für eine stahlintenisve zirkuläre und modulare Bauweise
elektrisch angetriebener Fahrzeuge}, author={Hermelingmeier, Lucas and Teutenberg,
Dominik and Meschut, Gerson and Korten, Matthias and Urban, Peter and Marquardt,
Raphael and Rethmeier, Michael}, editor={DECHEMA}, year={2026} }'
chicago: Hermelingmeier, Lucas, Dominik Teutenberg, Gerson Meschut, Matthias Korten,
Peter Urban, Raphael Marquardt, and Michael Rethmeier. “Konzeptentwicklung für
eine stahlintenisve zirkuläre und modulare Bauweise elektrisch angetriebener Fahrzeuge.”
edited by DECHEMA, 2026.
ieee: L. Hermelingmeier et al., “Konzeptentwicklung für eine stahlintenisve
zirkuläre und modulare Bauweise elektrisch angetriebener Fahrzeuge,” Köln, 2026.
mla: Hermelingmeier, Lucas, et al. Konzeptentwicklung für eine stahlintenisve
zirkuläre und modulare Bauweise elektrisch angetriebener Fahrzeuge. Edited
by DECHEMA, 2026.
short: 'L. Hermelingmeier, D. Teutenberg, G. Meschut, M. Korten, P. Urban, R. Marquardt,
M. Rethmeier, in: DECHEMA (Ed.), 2026.'
conference:
end_date: 2026-02-11
location: Köln
name: '26. Kolloquium: Gemeinsame Forschung in der Klebtechnik'
start_date: 2026-02-10
corporate_editor:
- DECHEMA
date_created: 2026-02-12T11:44:34Z
date_updated: 2026-02-12T11:48:18Z
department:
- _id: '157'
language:
- iso: ger
status: public
title: Konzeptentwicklung für eine stahlintenisve zirkuläre und modulare Bauweise
elektrisch angetriebener Fahrzeuge
type: conference_abstract
user_id: '58649'
year: '2026'
...
---
_id: '63607'
author:
- first_name: Marius
full_name: Striewe, Marius
id: '30228'
last_name: Striewe
- first_name: Lars
full_name: Schmelzle, Lars
last_name: Schmelzle
- first_name: Gunnar
full_name: Possart, Gunnar
last_name: Possart
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Julia
full_name: Mergheim, Julia
last_name: Mergheim
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
citation:
ama: Striewe M, Schmelzle L, Possart G, Meschut G, Mergheim J, Teutenberg D. Analytical
parameter identification for a viscoplastic material model for structural adhesive
bonds. Journal of Adhesion Science and Technology. Published online 2026:1-38.
doi:10.1080/01694243.2025.2611999
apa: Striewe, M., Schmelzle, L., Possart, G., Meschut, G., Mergheim, J., & Teutenberg,
D. (2026). Analytical parameter identification for a viscoplastic material model
for structural adhesive bonds. Journal of Adhesion Science and Technology,
1–38. https://doi.org/10.1080/01694243.2025.2611999
bibtex: '@article{Striewe_Schmelzle_Possart_Meschut_Mergheim_Teutenberg_2026, title={Analytical
parameter identification for a viscoplastic material model for structural adhesive
bonds}, DOI={10.1080/01694243.2025.2611999},
journal={Journal of Adhesion Science and Technology}, publisher={Informa UK Limited},
author={Striewe, Marius and Schmelzle, Lars and Possart, Gunnar and Meschut, Gerson
and Mergheim, Julia and Teutenberg, Dominik}, year={2026}, pages={1–38} }'
chicago: Striewe, Marius, Lars Schmelzle, Gunnar Possart, Gerson Meschut, Julia
Mergheim, and Dominik Teutenberg. “Analytical Parameter Identification for a Viscoplastic
Material Model for Structural Adhesive Bonds.” Journal of Adhesion Science
and Technology, 2026, 1–38. https://doi.org/10.1080/01694243.2025.2611999.
ieee: 'M. Striewe, L. Schmelzle, G. Possart, G. Meschut, J. Mergheim, and D. Teutenberg,
“Analytical parameter identification for a viscoplastic material model for structural
adhesive bonds,” Journal of Adhesion Science and Technology, pp. 1–38,
2026, doi: 10.1080/01694243.2025.2611999.'
mla: Striewe, Marius, et al. “Analytical Parameter Identification for a Viscoplastic
Material Model for Structural Adhesive Bonds.” Journal of Adhesion Science
and Technology, Informa UK Limited, 2026, pp. 1–38, doi:10.1080/01694243.2025.2611999.
short: M. Striewe, L. Schmelzle, G. Possart, G. Meschut, J. Mergheim, D. Teutenberg,
Journal of Adhesion Science and Technology (2026) 1–38.
date_created: 2026-01-14T08:27:17Z
date_updated: 2026-02-23T08:21:47Z
department:
- _id: '157'
doi: 10.1080/01694243.2025.2611999
language:
- iso: eng
page: 1-38
publication: Journal of Adhesion Science and Technology
publication_identifier:
issn:
- 0169-4243
- 1568-5616
publication_status: published
publisher: Informa UK Limited
quality_controlled: '1'
status: public
title: Analytical parameter identification for a viscoplastic material model for structural
adhesive bonds
type: journal_article
user_id: '537'
year: '2026'
...
---
_id: '63821'
article_number: '104264'
author:
- first_name: Maik
full_name: Gude, Maik
last_name: Gude
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Wilko
full_name: Flügge, Wilko
last_name: Flügge
- first_name: Linda
full_name: Fröck, Linda
last_name: Fröck
- first_name: Christopher
full_name: Wald, Christopher
last_name: Wald
- first_name: Vanessa
full_name: Neßlinger, Vanessa
last_name: Neßlinger
- first_name: Karsten
full_name: Dobrindt-Tittmann, Karsten
last_name: Dobrindt-Tittmann
- first_name: Juliane
full_name: Troschitz, Juliane
last_name: Troschitz
- first_name: Fynn Lucas
full_name: Neubert, Fynn Lucas
id: '74308'
last_name: Neubert
orcid: 0009-0006-5243-4531
- first_name: Martin
full_name: Hofmann, Martin
last_name: Hofmann
- first_name: Richard
full_name: Ostwald, Richard
id: '106876'
last_name: Ostwald
orcid: 0000-0003-2147-8444
- first_name: Christian
full_name: Mathiszik, Christian
last_name: Mathiszik
- first_name: Hans Christian
full_name: Schmale, Hans Christian
last_name: Schmale
- first_name: Thomas
full_name: Wallmersperger, Thomas
last_name: Wallmersperger
- first_name: Guido
full_name: Grundmeier, Guido
id: '194'
last_name: Grundmeier
citation:
ama: 'Gude M, Meschut G, Flügge W, et al. Corrosion of adhesively bonded alloys
in maritime environments: A review. International Journal of Adhesion and Adhesives.
2026;147. doi:10.1016/j.ijadhadh.2026.104264'
apa: 'Gude, M., Meschut, G., Flügge, W., Fröck, L., Wald, C., Neßlinger, V., Dobrindt-Tittmann,
K., Troschitz, J., Neubert, F. L., Hofmann, M., Ostwald, R., Mathiszik, C., Schmale,
H. C., Wallmersperger, T., & Grundmeier, G. (2026). Corrosion of adhesively
bonded alloys in maritime environments: A review. International Journal of
Adhesion and Adhesives, 147, Article 104264. https://doi.org/10.1016/j.ijadhadh.2026.104264'
bibtex: '@article{Gude_Meschut_Flügge_Fröck_Wald_Neßlinger_Dobrindt-Tittmann_Troschitz_Neubert_Hofmann_et
al._2026, title={Corrosion of adhesively bonded alloys in maritime environments:
A review}, volume={147}, DOI={10.1016/j.ijadhadh.2026.104264},
number={104264}, journal={International Journal of Adhesion and Adhesives}, publisher={Elsevier
BV}, author={Gude, Maik and Meschut, Gerson and Flügge, Wilko and Fröck, Linda
and Wald, Christopher and Neßlinger, Vanessa and Dobrindt-Tittmann, Karsten and
Troschitz, Juliane and Neubert, Fynn Lucas and Hofmann, Martin and et al.}, year={2026}
}'
chicago: 'Gude, Maik, Gerson Meschut, Wilko Flügge, Linda Fröck, Christopher Wald,
Vanessa Neßlinger, Karsten Dobrindt-Tittmann, et al. “Corrosion of Adhesively
Bonded Alloys in Maritime Environments: A Review.” International Journal of
Adhesion and Adhesives 147 (2026). https://doi.org/10.1016/j.ijadhadh.2026.104264.'
ieee: 'M. Gude et al., “Corrosion of adhesively bonded alloys in maritime
environments: A review,” International Journal of Adhesion and Adhesives,
vol. 147, Art. no. 104264, 2026, doi: 10.1016/j.ijadhadh.2026.104264.'
mla: 'Gude, Maik, et al. “Corrosion of Adhesively Bonded Alloys in Maritime Environments:
A Review.” International Journal of Adhesion and Adhesives, vol. 147, 104264,
Elsevier BV, 2026, doi:10.1016/j.ijadhadh.2026.104264.'
short: M. Gude, G. Meschut, W. Flügge, L. Fröck, C. Wald, V. Neßlinger, K. Dobrindt-Tittmann,
J. Troschitz, F.L. Neubert, M. Hofmann, R. Ostwald, C. Mathiszik, H.C. Schmale,
T. Wallmersperger, G. Grundmeier, International Journal of Adhesion and Adhesives
147 (2026).
date_created: 2026-01-30T15:54:11Z
date_updated: 2026-02-23T10:22:02Z
department:
- _id: '157'
doi: 10.1016/j.ijadhadh.2026.104264
intvolume: ' 147'
language:
- iso: eng
publication: International Journal of Adhesion and Adhesives
publication_identifier:
issn:
- 0143-7496
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: 'Corrosion of adhesively bonded alloys in maritime environments: A review'
type: journal_article
user_id: '74308'
volume: 147
year: '2026'
...
---
_id: '64130'
author:
- first_name: Lucas
full_name: Hermelingmeier, Lucas
id: '58649'
last_name: Hermelingmeier
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Hermelingmeier L, Teutenberg D, Meschut G. Methodenentwicklung zur Ermittlung
lokaler Klebschichtzustände innerhalb struktureller Verbindungen. In: DECHEMA,
ed. 26. Kolloquium: Gemeinsame Forschung in Der Klebtechnik. ; 2026.'
apa: 'Hermelingmeier, L., Teutenberg, D., & Meschut, G. (2026). Methodenentwicklung
zur Ermittlung lokaler Klebschichtzustände innerhalb struktureller Verbindungen.
In DECHEMA (Ed.), 26. Kolloquium: Gemeinsame Forschung in der Klebtechnik.'
bibtex: '@inproceedings{Hermelingmeier_Teutenberg_Meschut_2026, title={Methodenentwicklung
zur Ermittlung lokaler Klebschichtzustände innerhalb struktureller Verbindungen},
booktitle={26. Kolloquium: Gemeinsame Forschung in der Klebtechnik}, author={Hermelingmeier,
Lucas and Teutenberg, Dominik and Meschut, Gerson}, editor={DECHEMA}, year={2026}
}'
chicago: 'Hermelingmeier, Lucas, Dominik Teutenberg, and Gerson Meschut. “Methodenentwicklung
Zur Ermittlung Lokaler Klebschichtzustände Innerhalb Struktureller Verbindungen.”
In 26. Kolloquium: Gemeinsame Forschung in Der Klebtechnik, edited by DECHEMA,
2026.'
ieee: 'L. Hermelingmeier, D. Teutenberg, and G. Meschut, “Methodenentwicklung zur
Ermittlung lokaler Klebschichtzustände innerhalb struktureller Verbindungen,”
in 26. Kolloquium: Gemeinsame Forschung in der Klebtechnik, Köln, 2026.'
mla: 'Hermelingmeier, Lucas, et al. “Methodenentwicklung Zur Ermittlung Lokaler
Klebschichtzustände Innerhalb Struktureller Verbindungen.” 26. Kolloquium:
Gemeinsame Forschung in Der Klebtechnik, edited by DECHEMA, 2026.'
short: 'L. Hermelingmeier, D. Teutenberg, G. Meschut, in: DECHEMA (Ed.), 26. Kolloquium:
Gemeinsame Forschung in Der Klebtechnik, 2026.'
conference:
end_date: 2026-02-11
location: Köln
name: '26. Kolloquium: Gemeinsame Forschung in der Klebtechnik'
start_date: 2026-02-10
corporate_editor:
- DECHEMA
date_created: 2026-02-12T11:35:26Z
date_updated: 2026-02-23T11:43:48Z
department:
- _id: '157'
language:
- iso: eng
publication: '26. Kolloquium: Gemeinsame Forschung in der Klebtechnik'
status: public
title: Methodenentwicklung zur Ermittlung lokaler Klebschichtzustände innerhalb struktureller
Verbindungen
type: conference_abstract
user_id: '537'
year: '2026'
...
---
_id: '64589'
author:
- first_name: Maxim
full_name: Rodschei, Maxim
last_name: Rodschei
- first_name: Julia
full_name: Mergheim, Julia
last_name: Mergheim
- first_name: Fynn Lucas
full_name: Neubert, Fynn Lucas
id: '74308'
last_name: Neubert
orcid: 0009-0006-5243-4531
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Rodschei M, Mergheim J, Neubert FL, Teutenberg D, Meschut G. Experimentelle
und numerische Untersuchungen zur Alterung von Klebverbindungen unter zyklischer
und hygrothermischer Beanspruchung im Stahl- und Anlagenbau. In: 26. Kolloquium:
Gemeinsame Forschung in Der Klebtechnik. ; 2026.'
apa: 'Rodschei, M., Mergheim, J., Neubert, F. L., Teutenberg, D., & Meschut,
G. (2026). Experimentelle und numerische Untersuchungen zur Alterung von Klebverbindungen
unter zyklischer und hygrothermischer Beanspruchung im Stahl- und Anlagenbau.
26. Kolloquium: Gemeinsame Forschung in Der Klebtechnik. 26. Kolloquium:
Gemeinsame Forschung in der Klebtechnik, Köln.'
bibtex: '@inproceedings{Rodschei_Mergheim_Neubert_Teutenberg_Meschut_2026, title={Experimentelle
und numerische Untersuchungen zur Alterung von Klebverbindungen unter zyklischer
und hygrothermischer Beanspruchung im Stahl- und Anlagenbau}, booktitle={26. Kolloquium:
Gemeinsame Forschung in der Klebtechnik}, author={Rodschei, Maxim and Mergheim,
Julia and Neubert, Fynn Lucas and Teutenberg, Dominik and Meschut, Gerson}, year={2026}
}'
chicago: 'Rodschei, Maxim, Julia Mergheim, Fynn Lucas Neubert, Dominik Teutenberg,
and Gerson Meschut. “Experimentelle Und Numerische Untersuchungen Zur Alterung
von Klebverbindungen Unter Zyklischer Und Hygrothermischer Beanspruchung Im Stahl-
Und Anlagenbau.” In 26. Kolloquium: Gemeinsame Forschung in Der Klebtechnik,
2026.'
ieee: 'M. Rodschei, J. Mergheim, F. L. Neubert, D. Teutenberg, and G. Meschut, “Experimentelle
und numerische Untersuchungen zur Alterung von Klebverbindungen unter zyklischer
und hygrothermischer Beanspruchung im Stahl- und Anlagenbau,” presented at the
26. Kolloquium: Gemeinsame Forschung in der Klebtechnik, Köln, 2026.'
mla: 'Rodschei, Maxim, et al. “Experimentelle Und Numerische Untersuchungen Zur
Alterung von Klebverbindungen Unter Zyklischer Und Hygrothermischer Beanspruchung
Im Stahl- Und Anlagenbau.” 26. Kolloquium: Gemeinsame Forschung in Der Klebtechnik,
2026.'
short: 'M. Rodschei, J. Mergheim, F.L. Neubert, D. Teutenberg, G. Meschut, in: 26.
Kolloquium: Gemeinsame Forschung in Der Klebtechnik, 2026.'
conference:
end_date: 2026-02-11
location: Köln
name: '26. Kolloquium: Gemeinsame Forschung in der Klebtechnik'
start_date: 2026-02-10
date_created: 2026-02-23T13:28:04Z
date_updated: 2026-02-23T13:30:18Z
department:
- _id: '157'
language:
- iso: eng
publication: '26. Kolloquium: Gemeinsame Forschung in der Klebtechnik'
status: public
title: Experimentelle und numerische Untersuchungen zur Alterung von Klebverbindungen
unter zyklischer und hygrothermischer Beanspruchung im Stahl- und Anlagenbau
type: conference_abstract
user_id: '74308'
year: '2026'
...
---
_id: '64590'
author:
- first_name: Fynn Lucas
full_name: Neubert, Fynn Lucas
id: '74308'
last_name: Neubert
orcid: 0009-0006-5243-4531
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Neubert FL, Teutenberg D, Meschut G. Optimierung der induktiven Klebstoff-Schnellhärtung
durch numerische Prozesssimulation. In: 26. Kolloquium: Gemeinsame Forschung
in Der Klebtechnik. ; 2026.'
apa: 'Neubert, F. L., Teutenberg, D., & Meschut, G. (2026). Optimierung der
induktiven Klebstoff-Schnellhärtung durch numerische Prozesssimulation. 26.
Kolloquium: Gemeinsame Forschung in Der Klebtechnik. 26. Kolloquium: Gemeinsame
Forschung in der Klebtechnik, Köln.'
bibtex: '@inproceedings{Neubert_Teutenberg_Meschut_2026, title={Optimierung der
induktiven Klebstoff-Schnellhärtung durch numerische Prozesssimulation}, booktitle={26.
Kolloquium: Gemeinsame Forschung in der Klebtechnik}, author={Neubert, Fynn Lucas
and Teutenberg, Dominik and Meschut, Gerson}, year={2026} }'
chicago: 'Neubert, Fynn Lucas, Dominik Teutenberg, and Gerson Meschut. “Optimierung
Der Induktiven Klebstoff-Schnellhärtung Durch Numerische Prozesssimulation.” In
26. Kolloquium: Gemeinsame Forschung in Der Klebtechnik, 2026.'
ieee: 'F. L. Neubert, D. Teutenberg, and G. Meschut, “Optimierung der induktiven
Klebstoff-Schnellhärtung durch numerische Prozesssimulation,” presented at the
26. Kolloquium: Gemeinsame Forschung in der Klebtechnik, Köln, 2026.'
mla: 'Neubert, Fynn Lucas, et al. “Optimierung Der Induktiven Klebstoff-Schnellhärtung
Durch Numerische Prozesssimulation.” 26. Kolloquium: Gemeinsame Forschung in
Der Klebtechnik, 2026.'
short: 'F.L. Neubert, D. Teutenberg, G. Meschut, in: 26. Kolloquium: Gemeinsame
Forschung in Der Klebtechnik, 2026.'
conference:
end_date: 2026-02-11
location: Köln
name: '26. Kolloquium: Gemeinsame Forschung in der Klebtechnik'
start_date: 2026-02-10
date_created: 2026-02-23T13:32:27Z
date_updated: 2026-02-23T13:33:03Z
department:
- _id: '157'
language:
- iso: eng
publication: '26. Kolloquium: Gemeinsame Forschung in der Klebtechnik'
status: public
title: Optimierung der induktiven Klebstoff-Schnellhärtung durch numerische Prozesssimulation
type: conference_abstract
user_id: '74308'
year: '2026'
...
---
_id: '64593'
author:
- first_name: Fynn Lucas
full_name: Neubert, Fynn Lucas
id: '74308'
last_name: Neubert
orcid: 0009-0006-5243-4531
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Maxim
full_name: Rodschei, Maxim
last_name: Rodschei
- first_name: Julia
full_name: Mergheim, Julia
last_name: Mergheim
citation:
ama: 'Neubert FL, Teutenberg D, Meschut G, Rodschei M, Mergheim J. Bewitterung in
der Simulation. In: DECHEMA-Workshop Für Klebstoffanwender: Langzeitverhalten
von Klebungen. ; 2026.'
apa: 'Neubert, F. L., Teutenberg, D., Meschut, G., Rodschei, M., & Mergheim,
J. (2026). Bewitterung in der Simulation. DECHEMA-Workshop Für Klebstoffanwender:
Langzeitverhalten von Klebungen. DECHEMA-Workshop für Klebstoffanwender: Langzeitverhalten
von Klebungen, Köln.'
bibtex: '@inproceedings{Neubert_Teutenberg_Meschut_Rodschei_Mergheim_2026, title={Bewitterung
in der Simulation}, booktitle={DECHEMA-Workshop für Klebstoffanwender: Langzeitverhalten
von Klebungen}, author={Neubert, Fynn Lucas and Teutenberg, Dominik and Meschut,
Gerson and Rodschei, Maxim and Mergheim, Julia}, year={2026} }'
chicago: 'Neubert, Fynn Lucas, Dominik Teutenberg, Gerson Meschut, Maxim Rodschei,
and Julia Mergheim. “Bewitterung in Der Simulation.” In DECHEMA-Workshop Für
Klebstoffanwender: Langzeitverhalten von Klebungen, 2026.'
ieee: 'F. L. Neubert, D. Teutenberg, G. Meschut, M. Rodschei, and J. Mergheim, “Bewitterung
in der Simulation,” presented at the DECHEMA-Workshop für Klebstoffanwender: Langzeitverhalten
von Klebungen, Köln, 2026.'
mla: 'Neubert, Fynn Lucas, et al. “Bewitterung in Der Simulation.” DECHEMA-Workshop
Für Klebstoffanwender: Langzeitverhalten von Klebungen, 2026.'
short: 'F.L. Neubert, D. Teutenberg, G. Meschut, M. Rodschei, J. Mergheim, in: DECHEMA-Workshop
Für Klebstoffanwender: Langzeitverhalten von Klebungen, 2026.'
conference:
end_date: 2026-02-09
location: Köln
name: 'DECHEMA-Workshop für Klebstoffanwender: Langzeitverhalten von Klebungen'
start_date: 2026-02-09
date_created: 2026-02-23T13:35:40Z
date_updated: 2026-02-23T13:35:48Z
department:
- _id: '157'
language:
- iso: eng
publication: 'DECHEMA-Workshop für Klebstoffanwender: Langzeitverhalten von Klebungen'
status: public
title: Bewitterung in der Simulation
type: conference_abstract
user_id: '74308'
year: '2026'
...
---
_id: '64678'
abstract:
- lang: eng
text: "One of the major topics in the modern automotive industry is reducing emissions
and increasing the mileage\r\nrange. To tackle this challenge, on the one hand,
modifying the powertrain system is a possibility, and on the\r\nother hand, lightweight
design offers various possibilities. Multi-Material Design (MMD) involves designing
car\r\nbodies that combine different materials that require joining. Given the
variety of materials, mechanical joining\r\nprocesses are preferred. Especially
the current development of the Giga/Mega-casting process concerning\r\naluminium
casting and the subsequent mechanical joining illustrates the challenges of this
material group. In car\r\nproduction, aluminium castings are mainly made from
aluminium-silicon (AlSi) alloys. Ultimately, the alloy\r\nsystem's insufficient
ductility leads to crack initiation during mechanical joining. Cast parts are
therefore often\r\nused in areas of the car body that are exposed to high-pressure
loads. For example, self-piercing riveting (SPR) is\r\nused due to its high load-bearing
capacity. In this study, improved joinability is demonstrated by influencing the\r\nmicrostructure
through tailored solidification rates and a developed heat-treatment chain strategy
adapted for\r\nhypoeutectic AlSi systems. Data on microstructure, mechanical,
and joining properties are used to develop a\r\nsolidification-joining correlation
for the SPR process across a range of Si contents and solidification rates. The\r\npurpose
is to develop the ability to produce suitable aluminium castings with sufficient
joinability, thereby\r\nimproving versatility."
article_type: original
author:
- first_name: Moritz
full_name: Neuser, Moritz
id: '32340'
last_name: Neuser
- first_name: Pia Katharina
full_name: Kaimann, Pia Katharina
id: '44935'
last_name: Kaimann
- first_name: Ina
full_name: Stratmann, Ina
last_name: Stratmann
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: Johann Moritz Benedikt
full_name: Klöckner, Johann Moritz Benedikt
last_name: Klöckner
- first_name: Moritz
full_name: Mann, Moritz
last_name: Mann
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: Neuser M, Kaimann PK, Stratmann I, et al. Solidification-joinability correlation
of hypoeutectic aluminium casting alloys for self-piercing riveting (SPR). Journal
of Manufacturing Processes. 2026;164. doi:https://doi.org/10.1016/j.jmapro.2026.02.040
apa: Neuser, M., Kaimann, P. K., Stratmann, I., Bobbert, M., Klöckner, J. M. B.,
Mann, M., Hoyer, K.-P., Meschut, G., & Schaper, M. (2026). Solidification-joinability
correlation of hypoeutectic aluminium casting alloys for self-piercing riveting
(SPR). Journal of Manufacturing Processes, 164. https://doi.org/10.1016/j.jmapro.2026.02.040
bibtex: '@article{Neuser_Kaimann_Stratmann_Bobbert_Klöckner_Mann_Hoyer_Meschut_Schaper_2026,
title={Solidification-joinability correlation of hypoeutectic aluminium casting
alloys for self-piercing riveting (SPR)}, volume={164}, DOI={https://doi.org/10.1016/j.jmapro.2026.02.040},
journal={Journal of Manufacturing Processes}, publisher={Elsevier}, author={Neuser,
Moritz and Kaimann, Pia Katharina and Stratmann, Ina and Bobbert, Mathias and
Klöckner, Johann Moritz Benedikt and Mann, Moritz and Hoyer, Kay-Peter and Meschut,
Gerson and Schaper, Mirko}, year={2026} }'
chicago: Neuser, Moritz, Pia Katharina Kaimann, Ina Stratmann, Mathias Bobbert,
Johann Moritz Benedikt Klöckner, Moritz Mann, Kay-Peter Hoyer, Gerson Meschut,
and Mirko Schaper. “Solidification-Joinability Correlation of Hypoeutectic Aluminium
Casting Alloys for Self-Piercing Riveting (SPR).” Journal of Manufacturing
Processes 164 (2026). https://doi.org/10.1016/j.jmapro.2026.02.040.
ieee: 'M. Neuser et al., “Solidification-joinability correlation of hypoeutectic
aluminium casting alloys for self-piercing riveting (SPR),” Journal of Manufacturing
Processes, vol. 164, 2026, doi: https://doi.org/10.1016/j.jmapro.2026.02.040.'
mla: Neuser, Moritz, et al. “Solidification-Joinability Correlation of Hypoeutectic
Aluminium Casting Alloys for Self-Piercing Riveting (SPR).” Journal of Manufacturing
Processes, vol. 164, Elsevier, 2026, doi:https://doi.org/10.1016/j.jmapro.2026.02.040.
short: M. Neuser, P.K. Kaimann, I. Stratmann, M. Bobbert, J.M.B. Klöckner, M. Mann,
K.-P. Hoyer, G. Meschut, M. Schaper, Journal of Manufacturing Processes 164 (2026).
date_created: 2026-02-26T11:21:24Z
date_updated: 2026-02-26T11:22:03Z
department:
- _id: '43'
- _id: '158'
- _id: '157'
- _id: '321'
doi: https://doi.org/10.1016/j.jmapro.2026.02.040
funded_apc: '1'
intvolume: ' 164'
keyword:
- Mechanical joining
- Aluminium
- Self-piercing riveting
- Casting
- Microstructure
- Joinability AlSi-alloys
language:
- iso: eng
project:
- _id: '131'
name: TRR 285 - Project Area A
- _id: '133'
name: TRR 285 - Project Area C
- _id: '136'
name: TRR 285 - Subproject A02
- _id: '146'
name: TRR 285 - Subproject C02
- _id: '130'
name: 'TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen
Prozessketten'
publication: Journal of Manufacturing Processes
publication_status: published
publisher: Elsevier
quality_controlled: '1'
status: public
title: Solidification-joinability correlation of hypoeutectic aluminium casting alloys
for self-piercing riveting (SPR)
type: journal_article
user_id: '32340'
volume: 164
year: '2026'
...
---
_id: '64813'
abstract:
- lang: eng
text: This paper describes the development of a method concept for the mechanical
characterisation of cathodic electrodeposition (CED) coatings in the context of
adhesively bonded joints. The objective is to determine mechanical properties
of coating layer in order to incorporate its influence into numerical simulation
models for load-bearing adhesive joints. For this purpose, both single-lap joints
(SLJ) and modified thick adherend shear specimens (TASS) with defined CED coating
layers were produced and tested under quasi-static loading conditions. Additionally,
the deposition process was analysed in terms of coating thickness evolution as
a function of deposition time and applied voltage. The specimens were pre-cured
to reduce gas inclusions from evaporating solvents in the CED coating layer. The
pre-curing temperature was determined using DSC. The results indicate that the
modified TASS configuration is particularly suited for the reproducible evaluation
of the shear load-bearing capacity. In comparison to the SLJ, it favours the degassing
of solvents through the installation of grooves. Furthermore, it is demonstrated
that gas-induced defect zones originating from the electrochemical deposition
process significantly compromise joint performance. The experimental and process
methodology developed in this study enables isolated characterisation of the coating
layer and provides a solid foundation for simulation of coated adhesive joints.
author:
- first_name: Julia
full_name: Hofmann, Julia
id: '104312'
last_name: Hofmann
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: Hofmann J, Teutenberg D, Meschut G. Method development for the mechanical characterisation
of cathodic electrodeposition coatings for numerical simulation of bonded joints.
The Journal of Adhesion. Published online 2026:1-16. doi:10.1080/00218464.2026.2621198
apa: Hofmann, J., Teutenberg, D., & Meschut, G. (2026). Method development for
the mechanical characterisation of cathodic electrodeposition coatings for numerical
simulation of bonded joints. The Journal of Adhesion, 1–16. https://doi.org/10.1080/00218464.2026.2621198
bibtex: '@article{Hofmann_Teutenberg_Meschut_2026, title={Method development for
the mechanical characterisation of cathodic electrodeposition coatings for numerical
simulation of bonded joints}, DOI={10.1080/00218464.2026.2621198},
journal={The Journal of Adhesion}, publisher={Informa UK Limited}, author={Hofmann,
Julia and Teutenberg, Dominik and Meschut, Gerson}, year={2026}, pages={1–16}
}'
chicago: Hofmann, Julia, Dominik Teutenberg, and Gerson Meschut. “Method Development
for the Mechanical Characterisation of Cathodic Electrodeposition Coatings for
Numerical Simulation of Bonded Joints.” The Journal of Adhesion, 2026,
1–16. https://doi.org/10.1080/00218464.2026.2621198.
ieee: 'J. Hofmann, D. Teutenberg, and G. Meschut, “Method development for the mechanical
characterisation of cathodic electrodeposition coatings for numerical simulation
of bonded joints,” The Journal of Adhesion, pp. 1–16, 2026, doi: 10.1080/00218464.2026.2621198.'
mla: Hofmann, Julia, et al. “Method Development for the Mechanical Characterisation
of Cathodic Electrodeposition Coatings for Numerical Simulation of Bonded Joints.”
The Journal of Adhesion, Informa UK Limited, 2026, pp. 1–16, doi:10.1080/00218464.2026.2621198.
short: J. Hofmann, D. Teutenberg, G. Meschut, The Journal of Adhesion (2026) 1–16.
date_created: 2026-03-03T08:38:13Z
date_updated: 2026-03-03T08:55:16Z
department:
- _id: '157'
doi: 10.1080/00218464.2026.2621198
language:
- iso: eng
page: 1-16
publication: The Journal of Adhesion
publication_identifier:
issn:
- 0021-8464
- 1545-5823
publication_status: published
publisher: Informa UK Limited
quality_controlled: '1'
status: public
title: Method development for the mechanical characterisation of cathodic electrodeposition
coatings for numerical simulation of bonded joints
type: journal_article
user_id: '104312'
year: '2026'
...
---
_id: '64815'
author:
- first_name: Julia
full_name: Hofmann, Julia
id: '104312'
last_name: Hofmann
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Paul
full_name: Schulz, Paul
last_name: Schulz
- first_name: Maik
full_name: Gude, Maik
last_name: Gude
citation:
ama: 'Hofmann J, Teutenberg D, Meschut G, Schulz P, Gude M. Entwicklung eines methodischen
Ansatzes zur Gewährleistung der anforderungsgerechten Klebbarkeit von rezyklatbasierten
Kunststoffen in der Kreislaufwirtschaft. In: DECHEMA, ed. 26. Kolloquium: Gemeinsame
Forschung in Der Klebtechnik. ; 2026.'
apa: 'Hofmann, J., Teutenberg, D., Meschut, G., Schulz, P., & Gude, M. (2026).
Entwicklung eines methodischen Ansatzes zur Gewährleistung der anforderungsgerechten
Klebbarkeit von rezyklatbasierten Kunststoffen in der Kreislaufwirtschaft. In
DECHEMA (Ed.), 26. Kolloquium: Gemeinsame Forschung in der Klebtechnik.'
bibtex: '@inproceedings{Hofmann_Teutenberg_Meschut_Schulz_Gude_2026, title={Entwicklung
eines methodischen Ansatzes zur Gewährleistung der anforderungsgerechten Klebbarkeit
von rezyklatbasierten Kunststoffen in der Kreislaufwirtschaft}, booktitle={26.
Kolloquium: Gemeinsame Forschung in der Klebtechnik}, author={Hofmann, Julia and
Teutenberg, Dominik and Meschut, Gerson and Schulz, Paul and Gude, Maik}, editor={DECHEMA},
year={2026} }'
chicago: 'Hofmann, Julia, Dominik Teutenberg, Gerson Meschut, Paul Schulz, and Maik
Gude. “Entwicklung Eines Methodischen Ansatzes Zur Gewährleistung Der Anforderungsgerechten
Klebbarkeit von Rezyklatbasierten Kunststoffen in Der Kreislaufwirtschaft.” In
26. Kolloquium: Gemeinsame Forschung in Der Klebtechnik, edited by DECHEMA,
2026.'
ieee: 'J. Hofmann, D. Teutenberg, G. Meschut, P. Schulz, and M. Gude, “Entwicklung
eines methodischen Ansatzes zur Gewährleistung der anforderungsgerechten Klebbarkeit
von rezyklatbasierten Kunststoffen in der Kreislaufwirtschaft,” in 26. Kolloquium:
Gemeinsame Forschung in der Klebtechnik, 2026.'
mla: 'Hofmann, Julia, et al. “Entwicklung Eines Methodischen Ansatzes Zur Gewährleistung
Der Anforderungsgerechten Klebbarkeit von Rezyklatbasierten Kunststoffen in Der
Kreislaufwirtschaft.” 26. Kolloquium: Gemeinsame Forschung in Der Klebtechnik,
edited by DECHEMA, 2026.'
short: 'J. Hofmann, D. Teutenberg, G. Meschut, P. Schulz, M. Gude, in: DECHEMA (Ed.),
26. Kolloquium: Gemeinsame Forschung in Der Klebtechnik, 2026.'
conference:
end_date: 2026-02-11
name: '26. Kolloquium: Gemeinsame Forschung in der Klebtechnik'
start_date: 2026-02-10
corporate_editor:
- DECHEMA
date_created: 2026-03-03T08:46:08Z
date_updated: 2026-03-03T08:55:19Z
department:
- _id: '157'
language:
- iso: eng
publication: '26. Kolloquium: Gemeinsame Forschung in der Klebtechnik'
status: public
title: Entwicklung eines methodischen Ansatzes zur Gewährleistung der anforderungsgerechten
Klebbarkeit von rezyklatbasierten Kunststoffen in der Kreislaufwirtschaft
type: conference_abstract
user_id: '104312'
year: '2026'
...
---
_id: '64814'
author:
- first_name: Julia
full_name: Hofmann, Julia
id: '104312'
last_name: Hofmann
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Hofmann J, Teutenberg D, Meschut G. Methodenentwicklung zur numerischen Auslegung
von Klebverbindungen mit lackierten Fügeteilen. In: DECHEMA, ed. 26. Kolloquium:
Gemeinsame Forschung in Der Klebtechnik. ; 2026.'
apa: 'Hofmann, J., Teutenberg, D., & Meschut, G. (2026). Methodenentwicklung
zur numerischen Auslegung von Klebverbindungen mit lackierten Fügeteilen. In DECHEMA
(Ed.), 26. Kolloquium: Gemeinsame Forschung in der Klebtechnik.'
bibtex: '@inproceedings{Hofmann_Teutenberg_Meschut_2026, title={Methodenentwicklung
zur numerischen Auslegung von Klebverbindungen mit lackierten Fügeteilen}, booktitle={26.
Kolloquium: Gemeinsame Forschung in der Klebtechnik}, author={Hofmann, Julia and
Teutenberg, Dominik and Meschut, Gerson}, editor={DECHEMA}, year={2026} }'
chicago: 'Hofmann, Julia, Dominik Teutenberg, and Gerson Meschut. “Methodenentwicklung
Zur Numerischen Auslegung von Klebverbindungen Mit Lackierten Fügeteilen.” In
26. Kolloquium: Gemeinsame Forschung in Der Klebtechnik, edited by DECHEMA,
2026.'
ieee: 'J. Hofmann, D. Teutenberg, and G. Meschut, “Methodenentwicklung zur numerischen
Auslegung von Klebverbindungen mit lackierten Fügeteilen,” in 26. Kolloquium:
Gemeinsame Forschung in der Klebtechnik, 2026.'
mla: 'Hofmann, Julia, et al. “Methodenentwicklung Zur Numerischen Auslegung von
Klebverbindungen Mit Lackierten Fügeteilen.” 26. Kolloquium: Gemeinsame Forschung
in Der Klebtechnik, edited by DECHEMA, 2026.'
short: 'J. Hofmann, D. Teutenberg, G. Meschut, in: DECHEMA (Ed.), 26. Kolloquium:
Gemeinsame Forschung in Der Klebtechnik, 2026.'
conference:
end_date: 2026-02-11
name: '26. Kolloquium: Gemeinsame Forschung in der Klebtechnik'
start_date: 2026-02-10
corporate_editor:
- DECHEMA
date_created: 2026-03-03T08:43:25Z
date_updated: 2026-03-03T08:55:21Z
department:
- _id: '157'
language:
- iso: eng
publication: '26. Kolloquium: Gemeinsame Forschung in der Klebtechnik'
status: public
title: Methodenentwicklung zur numerischen Auslegung von Klebverbindungen mit lackierten
Fügeteilen
type: conference_abstract
user_id: '104312'
year: '2026'
...
---
_id: '63665'
article_number: '104264'
author:
- first_name: Maik
full_name: Gude, Maik
last_name: Gude
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Wilko
full_name: Flügge, Wilko
last_name: Flügge
- first_name: Linda
full_name: Fröck, Linda
last_name: Fröck
- first_name: Christopher
full_name: Wald, Christopher
last_name: Wald
- first_name: Vanessa
full_name: Neßlinger, Vanessa
last_name: Neßlinger
- first_name: Karsten
full_name: Dobrindt-Tittmann, Karsten
last_name: Dobrindt-Tittmann
- first_name: Juliane
full_name: Troschitz, Juliane
last_name: Troschitz
- first_name: Fynn
full_name: Neubert, Fynn
last_name: Neubert
- first_name: Martin
full_name: Hofmann, Martin
last_name: Hofmann
- first_name: Richard
full_name: Ostwald, Richard
id: '106876'
last_name: Ostwald
orcid: 0000-0003-2147-8444
- first_name: Christian
full_name: Mathiszik, Christian
last_name: Mathiszik
- first_name: Hans Christian
full_name: Schmale, Hans Christian
last_name: Schmale
- first_name: Thomas
full_name: Wallmersperger, Thomas
last_name: Wallmersperger
- first_name: Guido
full_name: Grundmeier, Guido
id: '194'
last_name: Grundmeier
citation:
ama: 'Gude M, Meschut G, Flügge W, et al. Corrosion of adhesively bonded alloys
in maritime environments: A review. International Journal of Adhesion and Adhesives.
2026;147. doi:10.1016/j.ijadhadh.2026.104264'
apa: 'Gude, M., Meschut, G., Flügge, W., Fröck, L., Wald, C., Neßlinger, V., Dobrindt-Tittmann,
K., Troschitz, J., Neubert, F., Hofmann, M., Ostwald, R., Mathiszik, C., Schmale,
H. C., Wallmersperger, T., & Grundmeier, G. (2026). Corrosion of adhesively
bonded alloys in maritime environments: A review. International Journal of
Adhesion and Adhesives, 147, Article 104264. https://doi.org/10.1016/j.ijadhadh.2026.104264'
bibtex: '@article{Gude_Meschut_Flügge_Fröck_Wald_Neßlinger_Dobrindt-Tittmann_Troschitz_Neubert_Hofmann_et
al._2026, title={Corrosion of adhesively bonded alloys in maritime environments:
A review}, volume={147}, DOI={10.1016/j.ijadhadh.2026.104264},
number={104264}, journal={International Journal of Adhesion and Adhesives}, publisher={Elsevier
BV}, author={Gude, Maik and Meschut, Gerson and Flügge, Wilko and Fröck, Linda
and Wald, Christopher and Neßlinger, Vanessa and Dobrindt-Tittmann, Karsten and
Troschitz, Juliane and Neubert, Fynn and Hofmann, Martin and et al.}, year={2026}
}'
chicago: 'Gude, Maik, Gerson Meschut, Wilko Flügge, Linda Fröck, Christopher Wald,
Vanessa Neßlinger, Karsten Dobrindt-Tittmann, et al. “Corrosion of Adhesively
Bonded Alloys in Maritime Environments: A Review.” International Journal of
Adhesion and Adhesives 147 (2026). https://doi.org/10.1016/j.ijadhadh.2026.104264.'
ieee: 'M. Gude et al., “Corrosion of adhesively bonded alloys in maritime
environments: A review,” International Journal of Adhesion and Adhesives,
vol. 147, Art. no. 104264, 2026, doi: 10.1016/j.ijadhadh.2026.104264.'
mla: 'Gude, Maik, et al. “Corrosion of Adhesively Bonded Alloys in Maritime Environments:
A Review.” International Journal of Adhesion and Adhesives, vol. 147, 104264,
Elsevier BV, 2026, doi:10.1016/j.ijadhadh.2026.104264.'
short: M. Gude, G. Meschut, W. Flügge, L. Fröck, C. Wald, V. Neßlinger, K. Dobrindt-Tittmann,
J. Troschitz, F. Neubert, M. Hofmann, R. Ostwald, C. Mathiszik, H.C. Schmale,
T. Wallmersperger, G. Grundmeier, International Journal of Adhesion and Adhesives
147 (2026).
date_created: 2026-01-20T09:06:03Z
date_updated: 2026-03-04T11:32:09Z
department:
- _id: '9'
- _id: '952'
- _id: '321'
doi: 10.1016/j.ijadhadh.2026.104264
intvolume: ' 147'
language:
- iso: eng
publication: International Journal of Adhesion and Adhesives
publication_identifier:
issn:
- 0143-7496
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: 'Corrosion of adhesively bonded alloys in maritime environments: A review'
type: journal_article
user_id: '85414'
volume: 147
year: '2026'
...
---
_id: '63391'
abstract:
- lang: eng
text: "This study addresses the challenge of insufficient weld penetration in the
outer thin low-carbon steel during\r\nresistance spot welding of three-layer dissimilar
stack-ups containing advanced high-strength steels. To overcome\r\nthermal imbalance
constraints, an innovative strategy leveraging plastic shell containment is proposed
to elevate\r\nthe expulsion-free heat input threshold. By applying a combined
preheating and ramping current profile, a coordinated “shell-first, nugget-second”
sequence is achieved. This mechanism creates a solid-state barrier prior to\r\nrapid
fusion, effectively preventing expulsion. Experimental results demonstrate that
while the reference\r\nconstant-current schedule fails to maintain a process window
under a 2 mm initial gap (IG) disturbance, the\r\nproposed strategy significantly
enhances process stability. It increases the maximum expulsion-free heat input
by\r\n24 % (to 6338 J) under normal conditions and by 77 % (to 6482 J) under the
IG condition. Crucially, the\r\nincreased heat input drives nugget growth across
all interfaces, achieving a penetration depth of 0.38 mm (48 %\r\npenetration
ratio) in the low-carbon steel sheet under the gap condition. These findings validate
the strategy’s\r\neffectiveness in ensuring weld quality and robustness, which
is further confirmed by its transferability to a lowerresistivity DX54D cover
sheet."
article_type: original
author:
- first_name: Keke
full_name: Yang, Keke
id: '65085'
last_name: Yang
orcid: 0000-0001-9201-9304
- first_name: Leonhard
full_name: Männer, Leonhard
id: '51255'
last_name: Männer
- first_name: Zhuoqun
full_name: Wang, Zhuoqun
last_name: Wang
- first_name: Viktoria
full_name: Olfert, Viktoria
id: '5974'
last_name: Olfert
- first_name: Yannic
full_name: Böhm, Yannic
id: '84119'
last_name: Böhm
- first_name: David
full_name: Hein, David
id: '7728'
last_name: Hein
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Yang K, Männer L, Wang Z, et al. Process window expansion with transferable
applicability in three-layer dissimilar steel resistance spot welding via expulsion
prevention. Journal of Manufacturing Processes. 2026;157(Special issue
entitled: ‘Trends on spot joining’ published in Journal of Manufacturing Processes.):984-1000.
doi:10.1016/j.jmapro.2025.12.036'
apa: 'Yang, K., Männer, L., Wang, Z., Olfert, V., Böhm, Y., Hein, D., & Meschut,
G. (2026). Process window expansion with transferable applicability in three-layer
dissimilar steel resistance spot welding via expulsion prevention. Journal
of Manufacturing Processes, 157(Special issue entitled: ‘Trends on
spot joining’ published in Journal of Manufacturing Processes.), 984–1000. https://doi.org/10.1016/j.jmapro.2025.12.036'
bibtex: '@article{Yang_Männer_Wang_Olfert_Böhm_Hein_Meschut_2026, title={Process
window expansion with transferable applicability in three-layer dissimilar steel
resistance spot welding via expulsion prevention}, volume={157}, DOI={10.1016/j.jmapro.2025.12.036},
number={Special issue entitled: ‘Trends on spot joining’ published in Journal
of Manufacturing Processes.}, journal={Journal of Manufacturing Processes}, publisher={Elsevier
BV}, author={Yang, Keke and Männer, Leonhard and Wang, Zhuoqun and Olfert, Viktoria
and Böhm, Yannic and Hein, David and Meschut, Gerson}, year={2026}, pages={984–1000}
}'
chicago: 'Yang, Keke, Leonhard Männer, Zhuoqun Wang, Viktoria Olfert, Yannic Böhm,
David Hein, and Gerson Meschut. “Process Window Expansion with Transferable Applicability
in Three-Layer Dissimilar Steel Resistance Spot Welding via Expulsion Prevention.”
Journal of Manufacturing Processes 157, no. Special issue entitled: ‘Trends
on spot joining’ published in Journal of Manufacturing Processes. (2026): 984–1000.
https://doi.org/10.1016/j.jmapro.2025.12.036.'
ieee: 'K. Yang et al., “Process window expansion with transferable applicability
in three-layer dissimilar steel resistance spot welding via expulsion prevention,”
Journal of Manufacturing Processes, vol. 157, no. Special issue entitled:
‘Trends on spot joining’ published in Journal of Manufacturing Processes., pp.
984–1000, 2026, doi: 10.1016/j.jmapro.2025.12.036.'
mla: 'Yang, Keke, et al. “Process Window Expansion with Transferable Applicability
in Three-Layer Dissimilar Steel Resistance Spot Welding via Expulsion Prevention.”
Journal of Manufacturing Processes, vol. 157, no. Special issue entitled:
‘Trends on spot joining’ published in Journal of Manufacturing Processes., Elsevier
BV, 2026, pp. 984–1000, doi:10.1016/j.jmapro.2025.12.036.'
short: K. Yang, L. Männer, Z. Wang, V. Olfert, Y. Böhm, D. Hein, G. Meschut, Journal
of Manufacturing Processes 157 (2026) 984–1000.
date_created: 2025-12-22T08:20:34Z
date_updated: 2025-12-22T08:24:19Z
ddc:
- '620'
department:
- _id: '157'
doi: 10.1016/j.jmapro.2025.12.036
file:
- access_level: closed
content_type: application/pdf
creator: kekeyang
date_created: 2025-12-22T08:21:51Z
date_updated: 2025-12-22T08:21:51Z
file_id: '63392'
file_name: 1-s2.0-S1526612525013568-main.pdf
file_size: 21431773
relation: main_file
success: 1
file_date_updated: 2025-12-22T08:21:51Z
has_accepted_license: '1'
intvolume: ' 157'
issue: 'Special issue entitled: ‘Trends on spot joining’ published in Journal of Manufacturing
Processes.'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://doi.org/10.1016/j.jmapro.2025.12.036
oa: '1'
page: 984-1000
publication: Journal of Manufacturing Processes
publication_identifier:
issn:
- 1526-6125
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Process window expansion with transferable applicability in three-layer dissimilar
steel resistance spot welding via expulsion prevention
type: journal_article
user_id: '65085'
volume: 157
year: '2026'
...
---
_id: '63418'
abstract:
- lang: eng
text: Manufacturing tolerances have a measurable influence on the structural integrity
of self-piercing riveted (SPR) joints in automotive applications, yet their quantitative
impact on load-bearing behavior remains insufficiently resolved. This study establishes
a validated hierarchical methodology to predict tolerance-dependent failure behavior
of SPR joints, progressing from coupon to sub-component scale through an integrated
experimental–numerical approach. Five critical manufacturing tolerances, including
rivet length (±0.5 mm), rivet head position (±0.3 mm), orthogonality deviation
(2.8° and 5°), lateral offset (up to 1.2 mm), and flange overlap reduction (up
to 7.5 mm), were investigated. Steel–steel joints exhibited a higher sensitivity
to tolerances by a factor of 2–3 compared to steel–aluminum joints. A unified
effective rivet length concept was developed to consolidate the geometric effects
of all tolerances into a single physically meaningful parameter, enabling load-bearing
capacity prediction with R2 > 0.95 across all evaluated loading directions. The
sub-component validation employing T-joint specimens indicates a 2–3 fold amplification
of tolerance effects at critical structural regions, providing experimental evidence
for the hierarchical scaling principle. The methodology was implemented in a tolerance-dependent
CONSTRAINED_SPR3 formulation, providing >99 % computational efficiency improvement
while maintaining a deviation in maximum force prediction within ±7 %. This framework
enables the physically consistent representation of manufacturing variation within
large-scale simulations and establishes a transferable basis for tolerance-resilient
virtual vehicle development.
article_type: original
author:
- first_name: Viktoria
full_name: Olfert, Viktoria
id: '5974'
last_name: Olfert
- first_name: Keke
full_name: Yang, Keke
id: '65085'
last_name: Yang
orcid: 0000-0001-9201-9304
- first_name: Philip
full_name: Rochel, Philip
last_name: Rochel
- first_name: Philipp
full_name: Bähr, Philipp
last_name: Bähr
- first_name: David
full_name: Hein, David
id: '7728'
last_name: Hein
- first_name: Silke
full_name: Sommer, Silke
last_name: Sommer
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Olfert V, Yang K, Rochel P, et al. Predictive modeling of tolerance-dependent
failure behavior of self-pierce riveted joints: From coupon-level tests to sub-component
validation. Journal of Manufacturing Processes. 2026;157(Special issue
entitled: ‘Trends on spot joining’ published in Journal of Manufacturing Processes.):1250-1273.
doi:10.1016/j.jmapro.2025.12.058'
apa: 'Olfert, V., Yang, K., Rochel, P., Bähr, P., Hein, D., Sommer, S., & Meschut,
G. (2026). Predictive modeling of tolerance-dependent failure behavior of self-pierce
riveted joints: From coupon-level tests to sub-component validation. Journal
of Manufacturing Processes, 157(Special issue entitled: ‘Trends on
spot joining’ published in Journal of Manufacturing Processes.), 1250–1273. https://doi.org/10.1016/j.jmapro.2025.12.058'
bibtex: '@article{Olfert_Yang_Rochel_Bähr_Hein_Sommer_Meschut_2026, title={Predictive
modeling of tolerance-dependent failure behavior of self-pierce riveted joints:
From coupon-level tests to sub-component validation}, volume={157}, DOI={10.1016/j.jmapro.2025.12.058},
number={Special issue entitled: ‘Trends on spot joining’ published in Journal
of Manufacturing Processes.}, journal={Journal of Manufacturing Processes}, publisher={Elsevier
BV}, author={Olfert, Viktoria and Yang, Keke and Rochel, Philip and Bähr, Philipp
and Hein, David and Sommer, Silke and Meschut, Gerson}, year={2026}, pages={1250–1273}
}'
chicago: 'Olfert, Viktoria, Keke Yang, Philip Rochel, Philipp Bähr, David Hein,
Silke Sommer, and Gerson Meschut. “Predictive Modeling of Tolerance-Dependent
Failure Behavior of Self-Pierce Riveted Joints: From Coupon-Level Tests to Sub-Component
Validation.” Journal of Manufacturing Processes 157, no. Special issue
entitled: ‘Trends on spot joining’ published in Journal of Manufacturing Processes.
(2026): 1250–73. https://doi.org/10.1016/j.jmapro.2025.12.058.'
ieee: 'V. Olfert et al., “Predictive modeling of tolerance-dependent failure
behavior of self-pierce riveted joints: From coupon-level tests to sub-component
validation,” Journal of Manufacturing Processes, vol. 157, no. Special
issue entitled: ‘Trends on spot joining’ published in Journal of Manufacturing
Processes., pp. 1250–1273, 2026, doi: 10.1016/j.jmapro.2025.12.058.'
mla: 'Olfert, Viktoria, et al. “Predictive Modeling of Tolerance-Dependent Failure
Behavior of Self-Pierce Riveted Joints: From Coupon-Level Tests to Sub-Component
Validation.” Journal of Manufacturing Processes, vol. 157, no. Special
issue entitled: ‘Trends on spot joining’ published in Journal of Manufacturing
Processes., Elsevier BV, 2026, pp. 1250–73, doi:10.1016/j.jmapro.2025.12.058.'
short: V. Olfert, K. Yang, P. Rochel, P. Bähr, D. Hein, S. Sommer, G. Meschut, Journal
of Manufacturing Processes 157 (2026) 1250–1273.
date_created: 2025-12-26T13:41:43Z
date_updated: 2025-12-26T14:06:38Z
ddc:
- '620'
department:
- _id: '157'
doi: 10.1016/j.jmapro.2025.12.058
file:
- access_level: closed
content_type: application/pdf
creator: kekeyang
date_created: 2025-12-26T13:42:22Z
date_updated: 2025-12-26T13:42:22Z
file_id: '63419'
file_name: 1-s2.0-S1526612525013787-main.pdf
file_size: 28796238
relation: main_file
success: 1
file_date_updated: 2025-12-26T13:42:22Z
has_accepted_license: '1'
intvolume: ' 157'
issue: 'Special issue entitled: ‘Trends on spot joining’ published in Journal of Manufacturing
Processes.'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.sciencedirect.com/science/article/pii/S1526612525013787?via%3Dihub
oa: '1'
page: 1250-1273
publication: Journal of Manufacturing Processes
publication_identifier:
issn:
- 1526-6125
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: 'Predictive modeling of tolerance-dependent failure behavior of self-pierce
riveted joints: From coupon-level tests to sub-component validation'
type: journal_article
user_id: '65085'
volume: 157
year: '2026'
...
---
_id: '64916'
abstract:
- lang: eng
text: The joining of dissimilar materials, such as steel and aluminum, entails significant
challenges during thermal curing processes due to differing coefficients of thermal
expansion. This study addresses the formation of “viscous fingering” instabilities
in structural adhesive joints, which are induced by thermally driven relative
displacements during the liquid phase of the adhesive. Using a component-like
specimen “bridge specimen,” the dependency of this phenomenon on process temperature
and structural stiffness (rivet distance) was characterized. Experimental results
reveal that while the relative displacement scales cubically with the free buckling
length, the resulting adhesive area reduction follows an exponential trend, leading
to a loss of effective bond area of up to 79%, which significantly compromises
the joint strength in automotive applications. To predict these process-induced
defects, a thermo-chemo-viscoelastic-viscoplastic adhesive model implemented in
LS-DYNA was applied. The model combines curing kinetics, viscoelastic relaxation,
and pressure-dependent plasticity and features a geometric damage parameter (D)
that captures the adhesive area reduction caused by viscous fingering as an exponential
function of the accumulated normal strain in the liquid phase. This damage parameter,
calibrated on base-specimen level, was transferred to the component geometry.
The simulation demonstrated high predictive accuracy with a maximum deviation
of the adhesive area reduction of 3.1% compared to experimental data. This validates
the model’s capability to predict manufacturing-induced damage in complex hybrid
structures solely based on thermal boundary conditions.
article_type: original
author:
- first_name: Mohamad
full_name: Al Trjman, Mohamad
id: '65415'
last_name: Al Trjman
- first_name: Felix
full_name: Beule, Felix
id: '66192'
last_name: Beule
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Julia
full_name: Riese, Julia
id: '101499'
last_name: Riese
orcid: 0000-0002-3053-0534
citation:
ama: Al Trjman M, Beule F, Teutenberg D, Meschut G, Riese J. Experimental characterization
and numerical analysis of the influence of the CED coating process on viscous
fingering formation in hybrid-jointed mixed structures. The Journal of Adhesion.
Published online 2026:1-24. doi:10.1080/00218464.2026.2644394
apa: Al Trjman, M., Beule, F., Teutenberg, D., Meschut, G., & Riese, J. (2026).
Experimental characterization and numerical analysis of the influence of the CED
coating process on viscous fingering formation in hybrid-jointed mixed structures.
The Journal of Adhesion, 1–24. https://doi.org/10.1080/00218464.2026.2644394
bibtex: '@article{Al Trjman_Beule_Teutenberg_Meschut_Riese_2026, title={Experimental
characterization and numerical analysis of the influence of the CED coating process
on viscous fingering formation in hybrid-jointed mixed structures}, DOI={10.1080/00218464.2026.2644394},
journal={The Journal of Adhesion}, publisher={Informa UK Limited}, author={Al
Trjman, Mohamad and Beule, Felix and Teutenberg, Dominik and Meschut, Gerson and
Riese, Julia}, year={2026}, pages={1–24} }'
chicago: Al Trjman, Mohamad, Felix Beule, Dominik Teutenberg, Gerson Meschut, and
Julia Riese. “Experimental Characterization and Numerical Analysis of the Influence
of the CED Coating Process on Viscous Fingering Formation in Hybrid-Jointed Mixed
Structures.” The Journal of Adhesion, 2026, 1–24. https://doi.org/10.1080/00218464.2026.2644394.
ieee: 'M. Al Trjman, F. Beule, D. Teutenberg, G. Meschut, and J. Riese, “Experimental
characterization and numerical analysis of the influence of the CED coating process
on viscous fingering formation in hybrid-jointed mixed structures,” The Journal
of Adhesion, pp. 1–24, 2026, doi: 10.1080/00218464.2026.2644394.'
mla: Al Trjman, Mohamad, et al. “Experimental Characterization and Numerical Analysis
of the Influence of the CED Coating Process on Viscous Fingering Formation in
Hybrid-Jointed Mixed Structures.” The Journal of Adhesion, Informa UK Limited,
2026, pp. 1–24, doi:10.1080/00218464.2026.2644394.
short: M. Al Trjman, F. Beule, D. Teutenberg, G. Meschut, J. Riese, The Journal
of Adhesion (2026) 1–24.
date_created: 2026-03-14T18:43:41Z
date_updated: 2026-03-14T19:04:46Z
ddc:
- '620'
- '670'
- '660'
department:
- _id: '9'
doi: 10.1080/00218464.2026.2644394
file:
- access_level: closed
content_type: application/pdf
creator: mohamada
date_created: 2026-03-14T18:50:31Z
date_updated: 2026-03-14T18:50:31Z
file_id: '64917'
file_name: Experimental characterization and numerical analysis of the influence
of the CED coating process on viscous fingering formation in hybrid-jointed mixe.pdf
file_size: 14668789
relation: main_file
success: 1
file_date_updated: 2026-03-14T18:50:31Z
has_accepted_license: '1'
keyword:
- Adhesive area reduction
- CED coating process
- delta alpha problem
- epoxy structural adhesive
- influence of manufacture
- multi-material design
- numerical simulation (FEM)
- relative displacements
- viscous fingering (saffman-taylor-instability).
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
page: 1-24
publication: The Journal of Adhesion
publication_identifier:
issn:
- 0021-8464
- 1545-5823
publication_status: published
publisher: Informa UK Limited
status: public
title: Experimental characterization and numerical analysis of the influence of the
CED coating process on viscous fingering formation in hybrid-jointed mixed structures
type: journal_article
user_id: '65415'
year: '2026'
...
---
_id: '64985'
abstract:
- lang: eng
text: Modern industrial development has necessitated a wide range of joining technologies.
Self-pierce riveting has become a prevalent technique for sheet metal assembly,
especially in automotive applications. Achieving proper joint geometry and adequate
load-bearing capacity depends on appropriate tool selection and precise process
control. Material properties and condition also play a significant role in process
performance. To accommodate the inevitable variations in component characteristics
during production, a robust and stable joining process is essential. The study
focuses on investigating the influence of preformed joining partners on the joining
process and the joint's load capacity. An EN AW-6014 in T4 condition, as well
as an HCT590X, are used as materials for this study. For this purpose, an exemplary
process chain consisting of the steps of performing, joining, and shear load testing
is studied. Each process step is implemented using an FE model to predict the
outcome of subsequent steps. For analysis of the influence of pre-strain, an optimisation
software is used to plan and execute variations of the process. These variations
are used to create a meta-model that can describe the relationships between pre-forming
and characteristic parameters of subsequent process steps. The resulting model
is validated by comparing simulation and experimental data. Finally, in a novel
approach, the robustness of the presented process chain is analyzed in terms of
a tolerable performance level for the joining partners.
article_number: '100391'
author:
- first_name: Jean-Patrick
full_name: Ludwig, Jean-Patrick
id: '76631'
last_name: Ludwig
- first_name: Emil
full_name: Tolke, Emil
last_name: Tolke
- first_name: Malte Christian
full_name: Schlichter, Malte Christian
id: '61977'
last_name: Schlichter
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: Ludwig J-P, Tolke E, Schlichter MC, Bobbert M, Meschut G. Numerical analysis
of the robustness of self-pierce riveting with pre-formed joining partners. Journal
of Advanced Joining Processes. 2026;13. doi:10.1016/j.jajp.2026.100391
apa: Ludwig, J.-P., Tolke, E., Schlichter, M. C., Bobbert, M., & Meschut, G.
(2026). Numerical analysis of the robustness of self-pierce riveting with pre-formed
joining partners. Journal of Advanced Joining Processes, 13, Article
100391. https://doi.org/10.1016/j.jajp.2026.100391
bibtex: '@article{Ludwig_Tolke_Schlichter_Bobbert_Meschut_2026, title={Numerical
analysis of the robustness of self-pierce riveting with pre-formed joining partners},
volume={13}, DOI={10.1016/j.jajp.2026.100391},
number={100391}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier
BV}, author={Ludwig, Jean-Patrick and Tolke, Emil and Schlichter, Malte Christian
and Bobbert, Mathias and Meschut, Gerson}, year={2026} }'
chicago: Ludwig, Jean-Patrick, Emil Tolke, Malte Christian Schlichter, Mathias Bobbert,
and Gerson Meschut. “Numerical Analysis of the Robustness of Self-Pierce Riveting
with Pre-Formed Joining Partners.” Journal of Advanced Joining Processes
13 (2026). https://doi.org/10.1016/j.jajp.2026.100391.
ieee: 'J.-P. Ludwig, E. Tolke, M. C. Schlichter, M. Bobbert, and G. Meschut, “Numerical
analysis of the robustness of self-pierce riveting with pre-formed joining partners,”
Journal of Advanced Joining Processes, vol. 13, Art. no. 100391, 2026,
doi: 10.1016/j.jajp.2026.100391.'
mla: Ludwig, Jean-Patrick, et al. “Numerical Analysis of the Robustness of Self-Pierce
Riveting with Pre-Formed Joining Partners.” Journal of Advanced Joining Processes,
vol. 13, 100391, Elsevier BV, 2026, doi:10.1016/j.jajp.2026.100391.
short: J.-P. Ludwig, E. Tolke, M.C. Schlichter, M. Bobbert, G. Meschut, Journal
of Advanced Joining Processes 13 (2026).
date_created: 2026-03-16T12:30:39Z
date_updated: 2026-03-16T12:38:13Z
department:
- _id: '9'
doi: 10.1016/j.jajp.2026.100391
intvolume: ' 13'
keyword:
- Self-pierce riveting
- FE modelling
- Plastic pre-deformation
- Meta modelling
language:
- iso: eng
project:
- _id: '131'
name: TRR 285 - Project Area A
- _id: '135'
name: TRR 285 - Subproject A01
- _id: '130'
name: 'TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen
Prozessketten'
publication: Journal of Advanced Joining Processes
publication_identifier:
issn:
- 2666-3309
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Numerical analysis of the robustness of self-pierce riveting with pre-formed
joining partners
type: journal_article
user_id: '76631'
volume: 13
year: '2026'
...
---
_id: '65104'
article_number: '104319'
author:
- first_name: Lucas
full_name: Hermelingmeier, Lucas
id: '58649'
last_name: Hermelingmeier
- first_name: Felix
full_name: Beule, Felix
id: '66192'
last_name: Beule
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Hermelingmeier L, Beule F, Teutenberg D, Meschut G. Comparison of fixture-based
and manual fiber integration in adhesive joints: Effects on strain signal quality.
International Journal of Adhesion and Adhesives. 2026;149. doi:10.1016/j.ijadhadh.2026.104319'
apa: 'Hermelingmeier, L., Beule, F., Teutenberg, D., & Meschut, G. (2026). Comparison
of fixture-based and manual fiber integration in adhesive joints: Effects on strain
signal quality. International Journal of Adhesion and Adhesives, 149,
Article 104319. https://doi.org/10.1016/j.ijadhadh.2026.104319'
bibtex: '@article{Hermelingmeier_Beule_Teutenberg_Meschut_2026, title={Comparison
of fixture-based and manual fiber integration in adhesive joints: Effects on strain
signal quality}, volume={149}, DOI={10.1016/j.ijadhadh.2026.104319},
number={104319}, journal={International Journal of Adhesion and Adhesives}, publisher={Elsevier
BV}, author={Hermelingmeier, Lucas and Beule, Felix and Teutenberg, Dominik and
Meschut, Gerson}, year={2026} }'
chicago: 'Hermelingmeier, Lucas, Felix Beule, Dominik Teutenberg, and Gerson Meschut.
“Comparison of Fixture-Based and Manual Fiber Integration in Adhesive Joints:
Effects on Strain Signal Quality.” International Journal of Adhesion and Adhesives
149 (2026). https://doi.org/10.1016/j.ijadhadh.2026.104319.'
ieee: 'L. Hermelingmeier, F. Beule, D. Teutenberg, and G. Meschut, “Comparison of
fixture-based and manual fiber integration in adhesive joints: Effects on strain
signal quality,” International Journal of Adhesion and Adhesives, vol.
149, Art. no. 104319, 2026, doi: 10.1016/j.ijadhadh.2026.104319.'
mla: 'Hermelingmeier, Lucas, et al. “Comparison of Fixture-Based and Manual Fiber
Integration in Adhesive Joints: Effects on Strain Signal Quality.” International
Journal of Adhesion and Adhesives, vol. 149, 104319, Elsevier BV, 2026, doi:10.1016/j.ijadhadh.2026.104319.'
short: L. Hermelingmeier, F. Beule, D. Teutenberg, G. Meschut, International Journal
of Adhesion and Adhesives 149 (2026).
date_created: 2026-03-24T13:17:14Z
date_updated: 2026-03-24T13:19:51Z
department:
- _id: '157'
doi: 10.1016/j.ijadhadh.2026.104319
intvolume: ' 149'
language:
- iso: eng
publication: International Journal of Adhesion and Adhesives
publication_identifier:
issn:
- 0143-7496
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: 'Comparison of fixture-based and manual fiber integration in adhesive joints:
Effects on strain signal quality'
type: journal_article
user_id: '58649'
volume: 149
year: '2026'
...
---
_id: '65373'
abstract:
- lang: eng
text: To reduce CO₂ emissions, the automotive industry is adopting multi-material
structures. Fusion-based joining reaches its limits for aluminium–steel due to
brittle intermetallic phases and mismatched thermophysical properties; therefore,
mechanical joining (e.g., SPR) is used. Though conventional SPR requires tool
changes for different stack-ups. Versatile self-piercing riveting (V-SPR) addresses
this with an extended punch actuator and a multi-range-capable rivet (Kappe in
PERD16:363–378, 2022), enabling joints up to 600 MPa across varying thicknesses
without retooling. With the use of ultra-high-strength steels up to 1000 MPa,
optimisation is required. This study quantifies how rivet shank geometry affects
joint formation using a design of experiments and validated 2D axisymmetric FE
simulations. The optimum depends strongly on the material system. For CP1000–EN
AW-6014, maximum interlock f is predicted for a medium shank thickness of about
0.73 mm, a small internal foot radius of 0.620 mm, and a deeper drill depth of
3.136 mm, yielding f fc =0.4503 mm with a desirability of 0.954. For EN AW-6014–EN
AW-6014, the optimum shifts to a thinner shank of 0.670 mm, a larger internal
foot radius of 0.820 mm and a shallow drill depth of 2.30 mm, giving ffc = 0.3023
mm with a desirability of 1.0. A compromise geometry of 0.713 mm shank thickness,
0.776 mm internal foot radius and 2.755 mm drill depth achieves ffc = 0.3641 mm
for CP1000–aluminium and ffc = 0.1851 mm for aluminium–aluminium with an overall
desirability D = 0.6378, expanding V-SPR to ultra-high-strength steel–aluminium
joints while maintaining aluminium joinability.
article_number: '43'
author:
- first_name: Pia Katharina
full_name: Kaimann, Pia Katharina
id: '44935'
last_name: Kaimann
- first_name: Nico
full_name: Ritter, Nico
last_name: Ritter
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: Kaimann PK, Ritter N, Bobbert M, Meschut G. Influence of the shank geometry
on the joint formation of the versatile self-piercing riveting of ultra-high-strength
steel-aluminium and aluminium-aluminium assemblies. Discover Mechanical Engineering.
2026;5(1). doi:10.1007/s44245-026-00221-y
apa: Kaimann, P. K., Ritter, N., Bobbert, M., & Meschut, G. (2026). Influence
of the shank geometry on the joint formation of the versatile self-piercing riveting
of ultra-high-strength steel-aluminium and aluminium-aluminium assemblies. Discover
Mechanical Engineering, 5(1), Article 43. https://doi.org/10.1007/s44245-026-00221-y
bibtex: '@article{Kaimann_Ritter_Bobbert_Meschut_2026, title={Influence of the shank
geometry on the joint formation of the versatile self-piercing riveting of ultra-high-strength
steel-aluminium and aluminium-aluminium assemblies}, volume={5}, DOI={10.1007/s44245-026-00221-y},
number={143}, journal={Discover Mechanical Engineering}, publisher={Springer Science
and Business Media LLC}, author={Kaimann, Pia Katharina and Ritter, Nico and Bobbert,
Mathias and Meschut, Gerson}, year={2026} }'
chicago: Kaimann, Pia Katharina, Nico Ritter, Mathias Bobbert, and Gerson Meschut.
“Influence of the Shank Geometry on the Joint Formation of the Versatile Self-Piercing
Riveting of Ultra-High-Strength Steel-Aluminium and Aluminium-Aluminium Assemblies.”
Discover Mechanical Engineering 5, no. 1 (2026). https://doi.org/10.1007/s44245-026-00221-y.
ieee: 'P. K. Kaimann, N. Ritter, M. Bobbert, and G. Meschut, “Influence of the shank
geometry on the joint formation of the versatile self-piercing riveting of ultra-high-strength
steel-aluminium and aluminium-aluminium assemblies,” Discover Mechanical Engineering,
vol. 5, no. 1, Art. no. 43, 2026, doi: 10.1007/s44245-026-00221-y.'
mla: Kaimann, Pia Katharina, et al. “Influence of the Shank Geometry on the Joint
Formation of the Versatile Self-Piercing Riveting of Ultra-High-Strength Steel-Aluminium
and Aluminium-Aluminium Assemblies.” Discover Mechanical Engineering, vol.
5, no. 1, 43, Springer Science and Business Media LLC, 2026, doi:10.1007/s44245-026-00221-y.
short: P.K. Kaimann, N. Ritter, M. Bobbert, G. Meschut, Discover Mechanical Engineering
5 (2026).
date_created: 2026-04-08T08:25:32Z
date_updated: 2026-04-08T08:34:40Z
department:
- _id: '43'
- _id: '157'
doi: 10.1007/s44245-026-00221-y
intvolume: ' 5'
issue: '1'
language:
- iso: eng
project:
- _id: '130'
name: 'TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen
Prozessketten'
- _id: '133'
name: TRR 285 - Project Area C
- _id: '146'
name: TRR 285 - Subproject C02
publication: Discover Mechanical Engineering
publication_identifier:
issn:
- 2731-6564
publication_status: published
publisher: Springer Science and Business Media LLC
quality_controlled: '1'
status: public
title: Influence of the shank geometry on the joint formation of the versatile self-piercing
riveting of ultra-high-strength steel-aluminium and aluminium-aluminium assemblies
type: journal_article
user_id: '44935'
volume: 5
year: '2026'
...
---
_id: '58444'
author:
- first_name: Jan
full_name: Wippermann, Jan
id: '55686'
last_name: Wippermann
orcid: 0000-0002-5013-853X
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: Wippermann J, Meschut G. Entwicklung einer Methode für die Prognose des Anziehdrehmoments
von Kunststoffmutte. JOINING PLASTICS. Published online 2025.
apa: Wippermann, J., & Meschut, G. (2025). Entwicklung einer Methode für die
Prognose des Anziehdrehmoments von Kunststoffmutte. JOINING PLASTICS.
bibtex: '@article{Wippermann_Meschut_2025, title={Entwicklung einer Methode für
die Prognose des Anziehdrehmoments von Kunststoffmutte}, journal={JOINING PLASTICS},
author={Wippermann, Jan and Meschut, Gerson}, year={2025} }'
chicago: Wippermann, Jan, and Gerson Meschut. “Entwicklung einer Methode für die
Prognose des Anziehdrehmoments von Kunststoffmutte.” JOINING PLASTICS,
2025.
ieee: J. Wippermann and G. Meschut, “Entwicklung einer Methode für die Prognose
des Anziehdrehmoments von Kunststoffmutte,” JOINING PLASTICS, 2025.
mla: Wippermann, Jan, and Gerson Meschut. “Entwicklung einer Methode für die Prognose
des Anziehdrehmoments von Kunststoffmutte.” JOINING PLASTICS, 2025.
short: J. Wippermann, G. Meschut, JOINING PLASTICS (2025).
date_created: 2025-01-30T14:36:35Z
date_updated: 2025-01-30T14:38:20Z
department:
- _id: '157'
language:
- iso: ger
publication: JOINING PLASTICS
publication_status: published
quality_controlled: '1'
status: public
title: Entwicklung einer Methode für die Prognose des Anziehdrehmoments von Kunststoffmutte
type: journal_article
user_id: '55686'
year: '2025'
...