[{"department":[{"_id":"156"},{"_id":"158"}],"publication_status":"published","publication_identifier":{"issn":["2474-395X"]},"project":[{"_id":"147","name":"TRR 285 – C03: TRR 285 - Subproject C03"},{"_id":"136","name":"TRR 285 – A02: TRR 285 - Subproject A02"}],"title":"Influence of thermo-mechanical joining process on the microstructure of a hypoeutectic aluminium cast alloy","language":[{"iso":"eng"}],"date_updated":"2024-03-14T15:22:17Z","doi":"10.21741/9781644902417-24","publisher":"Materials Research Forum LLC","author":[{"last_name":"Borgert","id":"83141","first_name":"Thomas","full_name":"Borgert, Thomas"},{"full_name":"Neuser, Moritz","first_name":"Moritz","id":"32340","last_name":"Neuser"},{"last_name":"Wiens","id":"7888","first_name":"Eugen","full_name":"Wiens, Eugen"},{"full_name":"Grydin, Olexandr","first_name":"Olexandr","id":"43822","last_name":"Grydin"},{"full_name":"Homberg, Werner","first_name":"Werner","id":"233","last_name":"Homberg"},{"id":"43720","last_name":"Schaper","full_name":"Schaper, Mirko","first_name":"Mirko"}],"quality_controlled":"1","publication":"Materials Research Proceedings","volume":25,"status":"public","date_created":"2023-03-16T14:59:01Z","abstract":[{"lang":"eng","text":"Abstract. Requirements of multi-material construction involve adjustments to standard joining techniques. Especially the growing importance of integral cast components poses additional engineering challenges for the industry. One approach to achieve these goals are adaptable joining elements formed by friction spinning. This approach uses friction-induced heat to form customisable joining elements to join sheets for different boundary conditions, even for brittle cast materials. It is possible to react immediately to adapt to the joining process inline and reduce the amount of different joining elements. As the joining partner serve casting plates of the aluminium casting alloy EN AC–AlSi9, which is processed in the sand casting. Joining hypoeutectic AlSi alloys constitutes a challenge because the brittle character of these cause cracks in the joint during conventional mechanical joining. Furthermore, the friction-induced heat of the novel joining process causes a finer microstructure in the hypoeutectic AlSi9 casting alloy. In particular, the eutectic Si is more fine-grained, resulting in higher joint ductility. This study indicates the joining suitability of a hypoeutectic aluminium casting alloy in combination with adaptive manufactured additional joining elements. Here, various mechanical and microstructural investigations validate the influence of the thermomechanical joining technique. In conclusion, the potential of this joining process is presented regarding the joinability of cast aluminium components. "}],"user_id":"32340","type":"conference","year":"2023","citation":{"ieee":"T. Borgert, M. Neuser, E. Wiens, O. Grydin, W. Homberg, and M. Schaper, “Influence of thermo-mechanical joining process on the microstructure of a hypoeutectic aluminium cast alloy,” in Materials Research Proceedings, Nürnberg, 2023, vol. 25, pp. 187–194, doi: 10.21741/9781644902417-24.","short":"T. Borgert, M. Neuser, E. Wiens, O. Grydin, W. Homberg, M. Schaper, in: Materials Research Proceedings, Materials Research Forum LLC, 2023, pp. 187–194.","bibtex":"@inproceedings{Borgert_Neuser_Wiens_Grydin_Homberg_Schaper_2023, title={Influence of thermo-mechanical joining process on the microstructure of a hypoeutectic aluminium cast alloy}, volume={25}, DOI={10.21741/9781644902417-24}, booktitle={Materials Research Proceedings}, publisher={Materials Research Forum LLC}, author={Borgert, Thomas and Neuser, Moritz and Wiens, Eugen and Grydin, Olexandr and Homberg, Werner and Schaper, Mirko}, year={2023}, pages={187–194} }","mla":"Borgert, Thomas, et al. “Influence of Thermo-Mechanical Joining Process on the Microstructure of a Hypoeutectic Aluminium Cast Alloy.” Materials Research Proceedings, vol. 25, Materials Research Forum LLC, 2023, pp. 187–94, doi:10.21741/9781644902417-24.","chicago":"Borgert, Thomas, Moritz Neuser, Eugen Wiens, Olexandr Grydin, Werner Homberg, and Mirko Schaper. “Influence of Thermo-Mechanical Joining Process on the Microstructure of a Hypoeutectic Aluminium Cast Alloy.” In Materials Research Proceedings, 25:187–94. Materials Research Forum LLC, 2023. https://doi.org/10.21741/9781644902417-24.","apa":"Borgert, T., Neuser, M., Wiens, E., Grydin, O., Homberg, W., & Schaper, M. (2023). Influence of thermo-mechanical joining process on the microstructure of a hypoeutectic aluminium cast alloy. Materials Research Proceedings, 25, 187–194. https://doi.org/10.21741/9781644902417-24","ama":"Borgert T, Neuser M, Wiens E, Grydin O, Homberg W, Schaper M. Influence of thermo-mechanical joining process on the microstructure of a hypoeutectic aluminium cast alloy. In: Materials Research Proceedings. Vol 25. Materials Research Forum LLC; 2023:187-194. doi:10.21741/9781644902417-24"},"page":"187-194","intvolume":" 25","_id":"43031","conference":{"location":"Nürnberg","name":"20th International Conference on Sheet Metal","start_date":"02.04.2023","end_date":"05.04.2023"}},{"publication_status":"published","publication_identifier":{"issn":["2504-4494"]},"project":[{"name":"TRR 285 – A02: TRR 285 - Subproject A02","_id":"136"}],"department":[{"_id":"158"}],"title":"Mechanical and Microstructure Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll Casting Process","language":[{"iso":"eng"}],"doi":"10.3390/jmmp7040132","date_updated":"2024-03-14T15:21:38Z","volume":7,"status":"public","date_created":"2024-03-08T16:09:27Z","author":[{"full_name":"Neuser, Moritz","first_name":"Moritz","id":"32340","last_name":"Neuser"},{"last_name":"Schaper","id":"43720","first_name":"Mirko","full_name":"Schaper, Mirko"},{"last_name":"Grydin","id":"43822","first_name":"Olexandr","full_name":"Grydin, Olexandr"}],"publisher":"MDPI AG","quality_controlled":"1","keyword":["Industrial and Manufacturing Engineering","Mechanical Engineering","Mechanics of Materials"],"publication":"Journal of Manufacturing and Materials Processing","user_id":"32340","abstract":[{"text":"Multi-material designs (MMD) are more frequently used in the automotive industry. Hereby, the combination of different materials, metal sheets, or cast components, is mechanically joined, often by forming joining processes. The cast components mostly used are high-strength, age-hardenable aluminium alloys of the Al–Si system. Here, the low ductility of the AlSi alloys constitutes a challenge because their brittle nature causes cracks during the joining process. However, by using suitable solidification conditions, it is possible to achieve a microstructure with improved mechanical and joining properties. For this study, we used the twin-roll casting process (TRC) with water-cooled rollers to manufacture the hypoeutectic AlSi10Mg for the first time. Hereby, high solidification rates are realisable, which introduces a microstructure that is about four times finer than in the sand casting process. In particular, it is shown that a fine microstructure close to the modification with Na or Sr is achieved by the high solidification rate in the TRC process without using these elements. Based on this, the mechanical properties increase, and especially the ductility is enhanced. Subsequent joining investigations validate the positive influence of a high solidification rate since cracks in joints can be avoided. Finally, a microstructure-property-joint suitability correlation is presented.","lang":"eng"}],"citation":{"apa":"Neuser, M., Schaper, M., & Grydin, O. (2023). Mechanical and Microstructure Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll Casting Process. Journal of Manufacturing and Materials Processing, 7(4), Article 132. https://doi.org/10.3390/jmmp7040132","ama":"Neuser M, Schaper M, Grydin O. Mechanical and Microstructure Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll Casting Process. Journal of Manufacturing and Materials Processing. 2023;7(4). doi:10.3390/jmmp7040132","chicago":"Neuser, Moritz, Mirko Schaper, and Olexandr Grydin. “Mechanical and Microstructure Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll Casting Process.” Journal of Manufacturing and Materials Processing 7, no. 4 (2023). https://doi.org/10.3390/jmmp7040132.","bibtex":"@article{Neuser_Schaper_Grydin_2023, title={Mechanical and Microstructure Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll Casting Process}, volume={7}, DOI={10.3390/jmmp7040132}, number={4132}, journal={Journal of Manufacturing and Materials Processing}, publisher={MDPI AG}, author={Neuser, Moritz and Schaper, Mirko and Grydin, Olexandr}, year={2023} }","mla":"Neuser, Moritz, et al. “Mechanical and Microstructure Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll Casting Process.” Journal of Manufacturing and Materials Processing, vol. 7, no. 4, 132, MDPI AG, 2023, doi:10.3390/jmmp7040132.","short":"M. Neuser, M. Schaper, O. Grydin, Journal of Manufacturing and Materials Processing 7 (2023).","ieee":"M. Neuser, M. Schaper, and O. Grydin, “Mechanical and Microstructure Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll Casting Process,” Journal of Manufacturing and Materials Processing, vol. 7, no. 4, Art. no. 132, 2023, doi: 10.3390/jmmp7040132."},"type":"journal_article","year":"2023","article_number":"132","issue":"4","intvolume":" 7","_id":"52405"},{"intvolume":" 7","_id":"47535","issue":"5","article_number":"169","year":"2023","type":"journal_article","citation":{"short":"T. Borgert, M. Neuser, K.-P. Hoyer, W. Homberg, M. Schaper, Journal of Manufacturing and Materials Processing 7 (2023).","ieee":"T. Borgert, M. Neuser, K.-P. Hoyer, W. Homberg, and M. Schaper, “Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates,” Journal of Manufacturing and Materials Processing, vol. 7, no. 5, Art. no. 169, 2023, doi: 10.3390/jmmp7050169.","chicago":"Borgert, Thomas, Moritz Neuser, Kay-Peter Hoyer, Werner Homberg, and Mirko Schaper. “Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates.” Journal of Manufacturing and Materials Processing 7, no. 5 (2023). https://doi.org/10.3390/jmmp7050169.","ama":"Borgert T, Neuser M, Hoyer K-P, Homberg W, Schaper M. Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates. Journal of Manufacturing and Materials Processing. 2023;7(5). doi:10.3390/jmmp7050169","apa":"Borgert, T., Neuser, M., Hoyer, K.-P., Homberg, W., & Schaper, M. (2023). Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates. Journal of Manufacturing and Materials Processing, 7(5), Article 169. https://doi.org/10.3390/jmmp7050169","mla":"Borgert, Thomas, et al. “Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates.” Journal of Manufacturing and Materials Processing, vol. 7, no. 5, 169, MDPI AG, 2023, doi:10.3390/jmmp7050169.","bibtex":"@article{Borgert_Neuser_Hoyer_Homberg_Schaper_2023, title={Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates}, volume={7}, DOI={10.3390/jmmp7050169}, number={5169}, journal={Journal of Manufacturing and Materials Processing}, publisher={MDPI AG}, author={Borgert, Thomas and Neuser, Moritz and Hoyer, Kay-Peter and Homberg, Werner and Schaper, Mirko}, year={2023} }"},"abstract":[{"lang":"eng","text":"Consistent lightweight construction in the area of vehicle manufacturing requires the increased use of multi-material combinations. This, in turn, requires an adaptation of standard joining techniques. In multi-material combinations, the importance of integral cast components, in particular, is increasing and poses additional technical challenges for the industry. One approach to solve these challenges is adaptable joining elements manufactured by a thermomechanical forming process. By applying an incremental and thermomechanical joining process, it is possible to react immediately and adapt the joining process inline to reduce the number of different joining elements. In the investigation described in this publication, cast plates made of the cast aluminium alloy EN AC-AlSi9 serve as joining partners, which are processed by sand casting. The joining process of hypoeutectic AlSi alloys is challenging as their brittle character leads to cracks in the joint during conventional mechanical joining. To solve this, the frictional heat of the novel joining process applied can provide a finer microstructure in the hypoeutectic AlSi9 cast alloy. In detail, its Si is finer-grained, resulting in higher ductility of the joint. This study reveals the thermomechanical joining suitability of a hypoeutectic cast aluminium alloy in combination with adaptively manufactured auxiliary joining elements."}],"article_type":"original","user_id":"32340","publication":"Journal of Manufacturing and Materials Processing","keyword":["Industrial and Manufacturing Engineering","Mechanical Engineering","Mechanics of Materials"],"publisher":"MDPI AG","author":[{"full_name":"Borgert, Thomas","first_name":"Thomas","id":"83141","last_name":"Borgert"},{"first_name":"Moritz","full_name":"Neuser, Moritz","last_name":"Neuser","id":"32340"},{"id":"48411","last_name":"Hoyer","full_name":"Hoyer, Kay-Peter","first_name":"Kay-Peter"},{"id":"233","last_name":"Homberg","full_name":"Homberg, Werner","first_name":"Werner"},{"full_name":"Schaper, Mirko","first_name":"Mirko","id":"43720","last_name":"Schaper"}],"quality_controlled":"1","date_created":"2023-10-02T06:46:53Z","status":"public","volume":7,"date_updated":"2024-03-14T15:22:06Z","doi":"10.3390/jmmp7050169","language":[{"iso":"eng"}],"title":"Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates","department":[{"_id":"156"},{"_id":"158"}],"project":[{"name":"TRR 285 – C03: TRR 285 - Subproject C03","_id":"147"},{"name":"TRR 285 – A02: TRR 285 - Subproject A02","_id":"136"}],"publication_status":"published","publication_identifier":{"issn":["2504-4494"]}},{"date_created":"2024-03-08T16:11:21Z","project":[{"name":"TRR 285 – A02: TRR 285 - Subproject A02","_id":"136"}],"status":"public","publication_status":"published","publication_identifier":{"isbn":["9783031413407","9783031413414"],"issn":["2195-4356","2195-4364"]},"department":[{"_id":"158"}],"publication":" Conference: ICTP 2023: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of PlasticityAt: Cannes (France)","quality_controlled":"1","publisher":"Springer Nature Switzerland","author":[{"last_name":"Grydin","id":"43822","first_name":"Olexandr","full_name":"Grydin, Olexandr"},{"id":"32340","last_name":"Neuser","full_name":"Neuser, Moritz","first_name":"Moritz"},{"full_name":"Schaper, Mirko","first_name":"Mirko","id":"43720","last_name":"Schaper"}],"user_id":"32340","title":"Influence of Shell Material on the Microstructure and Mechanical Properties of Twin-Roll Cast Al-Si-Mg Alloy","place":"Cham","language":[{"iso":"eng"}],"year":"2023","citation":{"short":"O. Grydin, M. Neuser, M. Schaper, in: Conference: ICTP 2023: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of PlasticityAt: Cannes (France), Springer Nature Switzerland, Cham, 2023.","ieee":"O. Grydin, M. Neuser, and M. Schaper, “Influence of Shell Material on the Microstructure and Mechanical Properties of Twin-Roll Cast Al-Si-Mg Alloy,” 2023, doi: 10.1007/978-3-031-41341-4_61.","chicago":"Grydin, Olexandr, Moritz Neuser, and Mirko Schaper. “Influence of Shell Material on the Microstructure and Mechanical Properties of Twin-Roll Cast Al-Si-Mg Alloy.” In Conference: ICTP 2023: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of PlasticityAt: Cannes (France). Cham: Springer Nature Switzerland, 2023. https://doi.org/10.1007/978-3-031-41341-4_61.","apa":"Grydin, O., Neuser, M., & Schaper, M. (2023). Influence of Shell Material on the Microstructure and Mechanical Properties of Twin-Roll Cast Al-Si-Mg Alloy. Conference: ICTP 2023: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of PlasticityAt: Cannes (France). https://doi.org/10.1007/978-3-031-41341-4_61","ama":"Grydin O, Neuser M, Schaper M. Influence of Shell Material on the Microstructure and Mechanical Properties of Twin-Roll Cast Al-Si-Mg Alloy. In: Conference: ICTP 2023: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of PlasticityAt: Cannes (France). Springer Nature Switzerland; 2023. doi:10.1007/978-3-031-41341-4_61","bibtex":"@inproceedings{Grydin_Neuser_Schaper_2023, place={Cham}, title={Influence of Shell Material on the Microstructure and Mechanical Properties of Twin-Roll Cast Al-Si-Mg Alloy}, DOI={10.1007/978-3-031-41341-4_61}, booktitle={ Conference: ICTP 2023: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of PlasticityAt: Cannes (France)}, publisher={Springer Nature Switzerland}, author={Grydin, Olexandr and Neuser, Moritz and Schaper, Mirko}, year={2023} }","mla":"Grydin, Olexandr, et al. “Influence of Shell Material on the Microstructure and Mechanical Properties of Twin-Roll Cast Al-Si-Mg Alloy.” Conference: ICTP 2023: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of PlasticityAt: Cannes (France), Springer Nature Switzerland, 2023, doi:10.1007/978-3-031-41341-4_61."},"type":"conference","doi":"10.1007/978-3-031-41341-4_61","_id":"52406","date_updated":"2024-03-14T15:21:12Z"},{"title":"Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting","project":[{"name":"TRR 285 – A02: TRR 285 - Subproject A02","_id":"136"},{"name":"TRR 285 - A: TRR 285 - Project Area A","_id":"131"},{"_id":"133","name":"TRR 285 - C: TRR 285 - Project Area C"},{"name":"TRR 285 – C02: TRR 285 - Subproject C02","_id":"146"}],"publication_status":"published","publication_identifier":{"issn":["1438-1656","1527-2648"]},"department":[{"_id":"158"},{"_id":"157"},{"_id":"321"}],"oa":"1","doi":"10.1002/adem.202200874","date_updated":"2024-03-14T15:22:33Z","language":[{"iso":"eng"}],"user_id":"32340","article_type":"original","abstract":[{"text":"AlSi casting alloys combine excellent castability with high strength. Hence, this group of alloys is often used in the automotive sector. The challenge for this application is the brittle character of these alloys which leads to cracks during joint formation when mechanical joining technologies are used. A rise in ductility can be achieved by a considerable increase in the solidification rate which results in grain refinement. High solidification rates can be realized in twin–roll casting (TRC) by water-cooled rolls. Therefore, a hypoeutectic EN AC–AlSi9 (for European Norm - aluminum cast product) is manufactured by the TRC process and analyzed. Subsequently, joining investigations are performed on castings in as-cast and heat-treated condition using the self-piercing riveting process considering the joint formation and the load-bearing capacity. Due to the fine microstructure, the crack initiation can be avoided during joining, while maintaining the joining parameters, especially by specimens in heat treatment conditions. Furthermore, due to the extremely fine microstructure, the load-bearing capacity of the joint can be significantly increased in terms of the maximum load-bearing force and the energy absorbed.","lang":"eng"}],"status":"public","date_created":"2023-01-12T09:33:55Z","volume":24,"quality_controlled":"1","publisher":"Wiley","author":[{"first_name":"Moritz","full_name":"Neuser, Moritz","last_name":"Neuser","id":"32340"},{"last_name":"Kappe","id":"66459","first_name":"Fabian","full_name":"Kappe, Fabian"},{"last_name":"Ostermeier","first_name":"Jakob","full_name":"Ostermeier, Jakob"},{"last_name":"Krüger","id":"44307","first_name":"Jan Tobias","full_name":"Krüger, Jan Tobias","orcid":"0000-0002-0827-9654"},{"first_name":"Mathias","full_name":"Bobbert, Mathias","last_name":"Bobbert","id":"7850"},{"first_name":"Gerson","orcid":"0000-0002-2763-1246","full_name":"Meschut, Gerson","last_name":"Meschut","id":"32056"},{"last_name":"Schaper","id":"43720","first_name":"Mirko","full_name":"Schaper, Mirko"},{"first_name":"Olexandr","full_name":"Grydin, Olexandr","last_name":"Grydin","id":"43822"}],"keyword":["Condensed Matter Physics","General Materials Science"],"publication":"Advanced Engineering Materials","issue":"10","article_number":"2200874","_id":"36332","intvolume":" 24","citation":{"short":"M. Neuser, F. Kappe, J. Ostermeier, J.T. Krüger, M. Bobbert, G. Meschut, M. Schaper, O. Grydin, Advanced Engineering Materials 24 (2022).","ieee":"M. Neuser et al., “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting,” Advanced Engineering Materials, vol. 24, no. 10, Art. no. 2200874, 2022, doi: 10.1002/adem.202200874.","chicago":"Neuser, Moritz, Fabian Kappe, Jakob Ostermeier, Jan Tobias Krüger, Mathias Bobbert, Gerson Meschut, Mirko Schaper, and Olexandr Grydin. “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting.” Advanced Engineering Materials 24, no. 10 (2022). https://doi.org/10.1002/adem.202200874.","ama":"Neuser M, Kappe F, Ostermeier J, et al. Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting. Advanced Engineering Materials. 2022;24(10). doi:10.1002/adem.202200874","apa":"Neuser, M., Kappe, F., Ostermeier, J., Krüger, J. T., Bobbert, M., Meschut, G., Schaper, M., & Grydin, O. (2022). Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting. Advanced Engineering Materials, 24(10), Article 2200874. https://doi.org/10.1002/adem.202200874","bibtex":"@article{Neuser_Kappe_Ostermeier_Krüger_Bobbert_Meschut_Schaper_Grydin_2022, title={Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting}, volume={24}, DOI={10.1002/adem.202200874}, number={102200874}, journal={Advanced Engineering Materials}, publisher={Wiley}, author={Neuser, Moritz and Kappe, Fabian and Ostermeier, Jakob and Krüger, Jan Tobias and Bobbert, Mathias and Meschut, Gerson and Schaper, Mirko and Grydin, Olexandr}, year={2022} }","mla":"Neuser, Moritz, et al. “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting.” Advanced Engineering Materials, vol. 24, no. 10, 2200874, Wiley, 2022, doi:10.1002/adem.202200874."},"year":"2022","type":"journal_article","main_file_link":[{"url":"https://onlinelibrary.wiley.com/doi/full/10.1002/adem.202200874","open_access":"1"}]},{"language":[{"iso":"eng"}],"date_updated":"2024-03-14T15:20:44Z","doi":"10.1177/14644207221075838","department":[{"_id":"630"},{"_id":"158"},{"_id":"157"}],"publication_status":"published","publication_identifier":{"issn":["1464-4207","2041-3076"]},"project":[{"name":"TRR 285: TRR 285","grant_number":"418701707","_id":"130"},{"_id":"131","name":"TRR 285 - A: TRR 285 - Project Area A"},{"_id":"136","name":"TRR 285 – A02: TRR 285 - Subproject A02"},{"_id":"131","name":"TRR 285 - A: TRR 285 - Project Area A"},{"_id":"135","name":"TRR 285 – A01: TRR 285 - Subproject A01"}],"title":"Influence of heat treatment on the suitability for clinching of the aluminium casting alloy AlSi9","citation":{"short":"M. Neuser, M. Böhnke, O. Grydin, M. Bobbert, M. Schaper, G. Meschut, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2022).","ieee":"M. Neuser, M. Böhnke, O. Grydin, M. Bobbert, M. Schaper, and G. Meschut, “Influence of heat treatment on the suitability for clinching of the aluminium casting alloy AlSi9,” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Art. no. 146442072210758, 2022, doi: 10.1177/14644207221075838.","ama":"Neuser M, Böhnke M, Grydin O, Bobbert M, Schaper M, Meschut G. Influence of heat treatment on the suitability for clinching of the aluminium casting alloy AlSi9. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. Published online 2022. doi:10.1177/14644207221075838","apa":"Neuser, M., Böhnke, M., Grydin, O., Bobbert, M., Schaper, M., & Meschut, G. (2022). Influence of heat treatment on the suitability for clinching of the aluminium casting alloy AlSi9. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Article 146442072210758. https://doi.org/10.1177/14644207221075838","chicago":"Neuser, Moritz, Max Böhnke, Olexandr Grydin, Mathias Bobbert, Mirko Schaper, and Gerson Meschut. “Influence of Heat Treatment on the Suitability for Clinching of the Aluminium Casting Alloy AlSi9.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2022. https://doi.org/10.1177/14644207221075838.","mla":"Neuser, Moritz, et al. “Influence of Heat Treatment on the Suitability for Clinching of the Aluminium Casting Alloy AlSi9.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 146442072210758, SAGE Publications, 2022, doi:10.1177/14644207221075838.","bibtex":"@article{Neuser_Böhnke_Grydin_Bobbert_Schaper_Meschut_2022, title={Influence of heat treatment on the suitability for clinching of the aluminium casting alloy AlSi9}, DOI={10.1177/14644207221075838}, number={146442072210758}, journal={Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications}, publisher={SAGE Publications}, author={Neuser, Moritz and Böhnke, Max and Grydin, Olexandr and Bobbert, Mathias and Schaper, Mirko and Meschut, Gerson}, year={2022} }"},"year":"2022","type":"journal_article","_id":"29724","article_number":"146442072210758","publication":"Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications","keyword":["Mechanical Engineering","General Materials Science"],"quality_controlled":"1","author":[{"last_name":"Neuser","id":"32340","first_name":"Moritz","full_name":"Neuser, Moritz"},{"first_name":"Max","full_name":"Böhnke, Max","last_name":"Böhnke","id":"45779"},{"last_name":"Grydin","id":"43822","first_name":"Olexandr","full_name":"Grydin, Olexandr"},{"full_name":"Bobbert, Mathias","first_name":"Mathias","id":"7850","last_name":"Bobbert"},{"full_name":"Schaper, Mirko","first_name":"Mirko","id":"43720","last_name":"Schaper"},{"last_name":"Meschut","id":"32056","first_name":"Gerson","full_name":"Meschut, Gerson","orcid":"0000-0002-2763-1246"}],"publisher":"SAGE Publications","date_created":"2022-02-02T09:05:45Z","status":"public","abstract":[{"text":" In many manufacturing areas, multi-material designs are implemented in which individual components are joined together to form complex structures with numerous joints. For example, in the automotive sector, cast components are used at the junctions of the body and joined with different types of sheet metal and extruded profiles. To be able to join structures consisting of different materials, alternative joining technologies have emerged in recent years. This includes clinching, which allows assembling of two or more thin sheet metal and casting parts by solely cold forming the material. Clinching the brittle and usually less ductile cast aluminium alloys remains a challenge because the brittle character of the cast aluminium alloys can cause cracks during the forming of the clinched joint. In this study, the influence of the heat treatment time of an aluminium casting alloy AlSi9 on the joinability in the clinching process is investigated. Specific heat treatment of the naturally hard AlSi9 leads to a modification of the eutectic microstructure, which can increase ductility. Based on this, it will be examined if specific clinching die geometries can be used, which achieve an optimized geometrical formation of the clinched joint. The load-bearing capacities of the clinched joints are determined and compared by shear tensile and head tensile tests. Furthermore, the joints are examined microscopically to investigate the influence of the heat treatment on the failure behaviour during the load-bearing tests as well as crack initiation within the joining process. ","lang":"eng"}],"user_id":"32340"},{"status":"public","date_created":"2022-01-24T08:27:48Z","publisher":"Springer Science and Business Media LLC","quality_controlled":"1","author":[{"last_name":"Neuser","id":"32340","first_name":"Moritz","full_name":"Neuser, Moritz"},{"full_name":"Grydin, Olexandr","first_name":"Olexandr","id":"43822","last_name":"Grydin"},{"full_name":"Frolov, Y.","first_name":"Y.","last_name":"Frolov"},{"last_name":"Schaper","id":"43720","first_name":"Mirko","full_name":"Schaper, Mirko"}],"publication":"Production Engineering","keyword":["Industrial and Manufacturing Engineering","Mechanical Engineering"],"user_id":"32340","article_type":"original","abstract":[{"text":"In modern vehicle chassis, multi-material design is implemented to apply the appropriate material for each functionality. In spaceframe technology, both sheet metal and continuous cast are joined to castings at the nodal points of the chassis. Since resistance spot welding is not an option when different materials are joined, research is focusing on mechanical joining methods for multi-material designs. To reduce weight and achieve the required strength, hardenable cast aluminium alloys of the AlSi-system are widely used. Thus, 85–90% of aluminium castings in the automotive industry are comprised of the AlSi-system. Due to the limited weldability, mechanical joining is a suitable process. For this application, various optimisation strategies are required to produce a crack-free joint, as the brittle character of the AlSi alloy poses a challenge. Thus, adapted castings with appropriate ductility are needed. Hence, in this study, the age-hardenable cast aluminium alloy AlSi10Mg is investigated regarding the correlation of the different thicknesses, the microstructural characteristics as well as the resulting mechanical properties. A variation of the thicknesses leads to different solidification rates, which in turn affect the microstructure formation and are decisive for the mechanical properties of the casting as well as the joinability. For the investigation, plates with thicknesses from 2.0 to 4.0 mm, each differing by 0.5 mm, are produced via sand casting. Hence, the overall aim is to evaluate the joinability of AlSi10Mg and derive conclusions concerning the microstructure and mechanical properties.","lang":"eng"}],"year":"2022","citation":{"short":"M. Neuser, O. Grydin, Y. Frolov, M. Schaper, Production Engineering (2022).","ieee":"M. Neuser, O. Grydin, Y. Frolov, and M. Schaper, “Influence of solidification rates and heat treatment on the mechanical performance and joinability of the cast aluminium alloy AlSi10Mg,” Production Engineering, 2022, doi: 10.1007/s11740-022-01106-1.","chicago":"Neuser, Moritz, Olexandr Grydin, Y. Frolov, and Mirko Schaper. “Influence of Solidification Rates and Heat Treatment on the Mechanical Performance and Joinability of the Cast Aluminium Alloy AlSi10Mg.” Production Engineering, 2022. https://doi.org/10.1007/s11740-022-01106-1.","apa":"Neuser, M., Grydin, O., Frolov, Y., & Schaper, M. (2022). Influence of solidification rates and heat treatment on the mechanical performance and joinability of the cast aluminium alloy AlSi10Mg. Production Engineering. https://doi.org/10.1007/s11740-022-01106-1","ama":"Neuser M, Grydin O, Frolov Y, Schaper M. Influence of solidification rates and heat treatment on the mechanical performance and joinability of the cast aluminium alloy AlSi10Mg. Production Engineering. Published online 2022. doi:10.1007/s11740-022-01106-1","bibtex":"@article{Neuser_Grydin_Frolov_Schaper_2022, title={Influence of solidification rates and heat treatment on the mechanical performance and joinability of the cast aluminium alloy AlSi10Mg}, DOI={10.1007/s11740-022-01106-1}, journal={Production Engineering}, publisher={Springer Science and Business Media LLC}, author={Neuser, Moritz and Grydin, Olexandr and Frolov, Y. and Schaper, Mirko}, year={2022} }","mla":"Neuser, Moritz, et al. “Influence of Solidification Rates and Heat Treatment on the Mechanical Performance and Joinability of the Cast Aluminium Alloy AlSi10Mg.” Production Engineering, Springer Science and Business Media LLC, 2022, doi:10.1007/s11740-022-01106-1."},"type":"journal_article","_id":"29505","project":[{"name":"TRR 285: TRR 285","grant_number":"418701707","_id":"130"},{"name":"TRR 285 - A: TRR 285 - Project Area A","_id":"131"},{"_id":"136","name":"TRR 285 – A02: TRR 285 - Subproject A02"}],"publication_identifier":{"issn":["0944-6524","1863-7353"]},"publication_status":"published","department":[{"_id":"43"},{"_id":"158"},{"_id":"321"},{"_id":"630"}],"title":"Influence of solidification rates and heat treatment on the mechanical performance and joinability of the cast aluminium alloy AlSi10Mg","language":[{"iso":"eng"}],"doi":"10.1007/s11740-022-01106-1","date_updated":"2024-03-14T15:21:51Z"},{"year":"2022","type":"journal_article","citation":{"chicago":"Kupfer, Robert, Daniel Köhler, David Römisch, Simon Wituschek, Lars Ewenz, Jan Kalich, Deborah Weiß, et al. “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties.” Journal of Advanced Joining Processes 5 (2022). https://doi.org/10.1016/j.jajp.2022.100108.","ama":"Kupfer R, Köhler D, Römisch D, et al. Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties. Journal of Advanced Joining Processes. 2022;5. doi:10.1016/j.jajp.2022.100108","apa":"Kupfer, R., Köhler, D., Römisch, D., Wituschek, S., Ewenz, L., Kalich, J., Weiß, D., Sadeghian, B., Busch, M., Krüger, J., Neuser, M., Grydin, O., Böhnke, M., Bielak, C. R., & Troschitz, J. (2022). Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties. Journal of Advanced Joining Processes, 5, Article 100108. https://doi.org/10.1016/j.jajp.2022.100108","mla":"Kupfer, Robert, et al. “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties.” Journal of Advanced Joining Processes, vol. 5, 100108, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100108.","bibtex":"@article{Kupfer_Köhler_Römisch_Wituschek_Ewenz_Kalich_Weiß_Sadeghian_Busch_Krüger_et al._2022, title={Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties}, volume={5}, DOI={10.1016/j.jajp.2022.100108}, number={100108}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Kupfer, Robert and Köhler, Daniel and Römisch, David and Wituschek, Simon and Ewenz, Lars and Kalich, Jan and Weiß, Deborah and Sadeghian, Behdad and Busch, Matthias and Krüger, Jan and et al.}, year={2022} }","short":"R. Kupfer, D. Köhler, D. Römisch, S. Wituschek, L. Ewenz, J. Kalich, D. Weiß, B. Sadeghian, M. Busch, J. Krüger, M. Neuser, O. Grydin, M. Böhnke, C.R. Bielak, J. Troschitz, Journal of Advanced Joining Processes 5 (2022).","ieee":"R. Kupfer et al., “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties,” Journal of Advanced Joining Processes, vol. 5, Art. no. 100108, 2022, doi: 10.1016/j.jajp.2022.100108."},"intvolume":" 5","_id":"31828","article_number":"100108","publication":"Journal of Advanced Joining Processes","keyword":["Mechanical Engineering","Mechanics of Materials","Engineering (miscellaneous)","Chemical Engineering (miscellaneous)"],"author":[{"full_name":"Kupfer, Robert","first_name":"Robert","last_name":"Kupfer"},{"full_name":"Köhler, Daniel","first_name":"Daniel","last_name":"Köhler"},{"last_name":"Römisch","full_name":"Römisch, David","first_name":"David"},{"first_name":"Simon","full_name":"Wituschek, Simon","last_name":"Wituschek"},{"full_name":"Ewenz, Lars","first_name":"Lars","last_name":"Ewenz"},{"last_name":"Kalich","full_name":"Kalich, Jan","first_name":"Jan"},{"first_name":"Deborah","full_name":"Weiß, Deborah","last_name":"Weiß","id":"45673"},{"last_name":"Sadeghian","full_name":"Sadeghian, Behdad","first_name":"Behdad"},{"last_name":"Busch","first_name":"Matthias","full_name":"Busch, Matthias"},{"last_name":"Krüger","first_name":"Jan","full_name":"Krüger, Jan"},{"full_name":"Neuser, Moritz","first_name":"Moritz","id":"32340","last_name":"Neuser"},{"full_name":"Grydin, Olexandr","first_name":"Olexandr","id":"43822","last_name":"Grydin"},{"first_name":"Max","full_name":"Böhnke, Max","last_name":"Böhnke","id":"45779"},{"first_name":"Christian Roman","full_name":"Bielak, Christian Roman","last_name":"Bielak","id":"34782"},{"last_name":"Troschitz","first_name":"Juliane","full_name":"Troschitz, Juliane"}],"publisher":"Elsevier BV","quality_controlled":"1","date_created":"2022-06-09T06:23:00Z","status":"public","volume":5,"user_id":"32340","language":[{"iso":"eng"}],"date_updated":"2024-03-14T15:22:46Z","doi":"10.1016/j.jajp.2022.100108","department":[{"_id":"157"},{"_id":"158"}],"project":[{"_id":"130","name":"TRR 285: TRR 285","grant_number":"418701707"},{"name":"TRR 285 - A: TRR 285 - Project Area A","_id":"131"},{"name":"TRR 142 - A02: TRR 142 - Subproject A02","grant_number":"231447078","_id":"59"}],"publication_status":"published","publication_identifier":{"issn":["2666-3309"]},"title":"Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties"},{"doi":"10.1016/j.jajp.2022.100108","date_updated":"2024-03-14T15:23:30Z","language":[{"iso":"eng"}],"title":"Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties","publication_status":"published","publication_identifier":{"issn":["2666-3309"]},"project":[{"_id":"131","name":"TRR 285 - A: TRR 285 - Project Area A"},{"name":"TRR 285 – A02: TRR 285 - Subproject A02","_id":"136"}],"department":[{"_id":"158"}],"article_number":"100108","_id":"31238","citation":{"short":"R. Kupfer, D. Köhler, D. Römisch, S. Wituschek, L. Ewenz, J. Kalich, D. Weiß, B. Sadeghian, M. Busch, J.T. Krüger, M. Neuser, O. Grydin, M. Böhnke, C.-R. Bielak, J. Troschitz, Journal of Advanced Joining Processes (2022).","ieee":"R. Kupfer et al., “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties,” Journal of Advanced Joining Processes, Art. no. 100108, 2022, doi: 10.1016/j.jajp.2022.100108.","ama":"Kupfer R, Köhler D, Römisch D, et al. Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties. Journal of Advanced Joining Processes. Published online 2022. doi:10.1016/j.jajp.2022.100108","apa":"Kupfer, R., Köhler, D., Römisch, D., Wituschek, S., Ewenz, L., Kalich, J., Weiß, D., Sadeghian, B., Busch, M., Krüger, J. T., Neuser, M., Grydin, O., Böhnke, M., Bielak, C.-R., & Troschitz, J. (2022). Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties. Journal of Advanced Joining Processes, Article 100108. https://doi.org/10.1016/j.jajp.2022.100108","chicago":"Kupfer, Robert, Daniel Köhler, David Römisch, Simon Wituschek, Lars Ewenz, Jan Kalich, Deborah Weiß, et al. “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties.” Journal of Advanced Joining Processes, 2022. https://doi.org/10.1016/j.jajp.2022.100108.","mla":"Kupfer, Robert, et al. “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties.” Journal of Advanced Joining Processes, 100108, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100108.","bibtex":"@article{Kupfer_Köhler_Römisch_Wituschek_Ewenz_Kalich_Weiß_Sadeghian_Busch_Krüger_et al._2022, title={Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties}, DOI={10.1016/j.jajp.2022.100108}, number={100108}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Kupfer, Robert and Köhler, Daniel and Römisch, David and Wituschek, Simon and Ewenz, Lars and Kalich, Jan and Weiß, Deborah and Sadeghian, Behdad and Busch, Matthias and Krüger, Jan Tobias and et al.}, year={2022} }"},"year":"2022","type":"journal_article","user_id":"32340","date_created":"2022-05-12T13:48:16Z","status":"public","keyword":["Mechanical Engineering","Mechanics of Materials","Engineering (miscellaneous)","Chemical Engineering (miscellaneous)"],"publication":"Journal of Advanced Joining Processes","quality_controlled":"1","publisher":"Elsevier BV","author":[{"last_name":"Kupfer","first_name":"Robert","full_name":"Kupfer, Robert"},{"last_name":"Köhler","full_name":"Köhler, Daniel","first_name":"Daniel"},{"last_name":"Römisch","full_name":"Römisch, David","first_name":"David"},{"last_name":"Wituschek","first_name":"Simon","full_name":"Wituschek, Simon"},{"last_name":"Ewenz","first_name":"Lars","full_name":"Ewenz, Lars"},{"full_name":"Kalich, Jan","first_name":"Jan","last_name":"Kalich"},{"id":"45673","last_name":"Weiß","full_name":"Weiß, Deborah","first_name":"Deborah"},{"last_name":"Sadeghian","full_name":"Sadeghian, Behdad","first_name":"Behdad"},{"last_name":"Busch","full_name":"Busch, Matthias","first_name":"Matthias"},{"id":"44307","last_name":"Krüger","full_name":"Krüger, Jan Tobias","orcid":"0000-0002-0827-9654","first_name":"Jan Tobias"},{"id":"32340","last_name":"Neuser","full_name":"Neuser, Moritz","first_name":"Moritz"},{"id":"43822","last_name":"Grydin","full_name":"Grydin, Olexandr","first_name":"Olexandr"},{"full_name":"Böhnke, Max","first_name":"Max","id":"45779","last_name":"Böhnke"},{"last_name":"Bielak","first_name":"Christian-Roman","full_name":"Bielak, Christian-Roman"},{"last_name":"Troschitz","first_name":"Juliane","full_name":"Troschitz, Juliane"}]},{"doi":"10.1007/978-3-030-92529-1_96","date_updated":"2024-03-14T15:24:47Z","_id":"29771","citation":{"chicago":"Grydin, Olexandr, Dag Mortensen, Moritz Neuser, Dag Lindholm, Hallvard G. Fjaer, and Mirko Schaper. “Numerical and Experimental Investigation of Heat Transfer in the Solidification-Deformation Zone During Twin-Roll Casting of Aluminum Strips.” In Light Metals 2022. Cham: Springer International Publishing, 2022. https://doi.org/10.1007/978-3-030-92529-1_96.","apa":"Grydin, O., Mortensen, D., Neuser, M., Lindholm, D., Fjaer, H. G., & Schaper, M. (2022). Numerical and Experimental Investigation of Heat Transfer in the Solidification-Deformation Zone During Twin-Roll Casting of Aluminum Strips. In Light Metals 2022. Springer International Publishing. https://doi.org/10.1007/978-3-030-92529-1_96","ama":"Grydin O, Mortensen D, Neuser M, Lindholm D, Fjaer HG, Schaper M. Numerical and Experimental Investigation of Heat Transfer in the Solidification-Deformation Zone During Twin-Roll Casting of Aluminum Strips. In: Light Metals 2022. Springer International Publishing; 2022. doi:10.1007/978-3-030-92529-1_96","mla":"Grydin, Olexandr, et al. “Numerical and Experimental Investigation of Heat Transfer in the Solidification-Deformation Zone During Twin-Roll Casting of Aluminum Strips.” Light Metals 2022, Springer International Publishing, 2022, doi:10.1007/978-3-030-92529-1_96.","bibtex":"@inbook{Grydin_Mortensen_Neuser_Lindholm_Fjaer_Schaper_2022, place={Cham}, title={Numerical and Experimental Investigation of Heat Transfer in the Solidification-Deformation Zone During Twin-Roll Casting of Aluminum Strips}, DOI={10.1007/978-3-030-92529-1_96}, booktitle={Light Metals 2022}, publisher={Springer International Publishing}, author={Grydin, Olexandr and Mortensen, Dag and Neuser, Moritz and Lindholm, Dag and Fjaer, Hallvard G. and Schaper, Mirko}, year={2022} }","short":"O. Grydin, D. Mortensen, M. Neuser, D. Lindholm, H.G. Fjaer, M. Schaper, in: Light Metals 2022, Springer International Publishing, Cham, 2022.","ieee":"O. Grydin, D. Mortensen, M. Neuser, D. Lindholm, H. G. Fjaer, and M. Schaper, “Numerical and Experimental Investigation of Heat Transfer in the Solidification-Deformation Zone During Twin-Roll Casting of Aluminum Strips,” in Light Metals 2022, Cham: Springer International Publishing, 2022."},"year":"2022","type":"book_chapter","language":[{"iso":"eng"}],"title":"Numerical and Experimental Investigation of Heat Transfer in the Solidification-Deformation Zone During Twin-Roll Casting of Aluminum Strips","user_id":"32340","place":"Cham","publication_identifier":{"issn":["2367-1181","2367-1696"],"isbn":["9783030925284","9783030925291"]},"publication_status":"published","project":[{"grant_number":"418701707","name":"TRR 285: TRR 285","_id":"130"},{"_id":"136","name":"TRR 285 – A02: TRR 285 - Subproject A02"}],"date_created":"2022-02-07T18:02:27Z","status":"public","publication":"Light Metals 2022","department":[{"_id":"158"},{"_id":"630"}],"author":[{"first_name":"Olexandr","full_name":"Grydin, Olexandr","last_name":"Grydin","id":"43822"},{"last_name":"Mortensen","first_name":"Dag","full_name":"Mortensen, Dag"},{"full_name":"Neuser, Moritz","first_name":"Moritz","id":"32340","last_name":"Neuser"},{"first_name":"Dag","full_name":"Lindholm, Dag","last_name":"Lindholm"},{"full_name":"Fjaer, Hallvard G.","first_name":"Hallvard G.","last_name":"Fjaer"},{"first_name":"Mirko","full_name":"Schaper, Mirko","last_name":"Schaper","id":"43720"}],"quality_controlled":"1","publisher":"Springer International Publishing"},{"title":"Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties","department":[{"_id":"630"},{"_id":"158"}],"project":[{"name":"TRR 285: TRR 285","grant_number":"418701707","_id":"130"},{"_id":"133","name":"TRR 285 - C: TRR 285 - Project Area C"},{"_id":"148","name":"TRR 285 – C04: TRR 285 - Subproject C04"},{"name":"TRR 285 – C02: TRR 285 - Subproject C02","_id":"146"},{"name":"TRR 285 – C01: TRR 285 - Subproject C01","_id":"145"},{"name":"TRR 285 - B: TRR 285 - Project Area B","_id":"132"},{"_id":"141","name":"TRR 285 – B02: TRR 285 - Subproject B02"},{"_id":"138","name":"TRR 285 – A04: TRR 285 - Subproject A04"},{"_id":"135","name":"TRR 285 – A01: TRR 285 - Subproject A01"},{"name":"TRR 285 – A02: TRR 285 - Subproject A02","_id":"136"},{"name":"TRR 285 – C05: TRR 285 - Subproject C05","_id":"149"},{"_id":"143","name":"TRR 285 – B04: TRR 285 - Subproject B04"}],"publication_status":"published","publication_identifier":{"issn":["2666-3309"]},"date_updated":"2024-03-20T11:54:33Z","doi":"10.1016/j.jajp.2022.100108","language":[{"iso":"eng"}],"abstract":[{"lang":"eng","text":"Clinching as a mechanical joining technique allows a fast and reliable joining of metal sheets in large-scale production. An efficient design and dimensioning of clinched joints requires a holistic understanding of the material, the joining process and the resulting properties of the joint. In this paper, the process chain for clinching metal sheets is described and experimental techniques are proposed to analyze the process-microstructure-property relationships from the sheet metal to the joined structure. At the example of clinching aluminum EN AW 6014, characterization methods are applied and discussed for the following characteristics: the mechanical properties of the sheet materials, the tribological behavior in the joining system, the joining process and the resulting material structure, the load-bearing behavior of the joint, the damage and degradation as well as the service life and crack growth behavior. The compilation of the characterization methods gives an overview on the advantages and weaknesses of the methods and the multiple interactions of material, process and properties during clinching. In addition, the results of the analyses on EN AW 6014 can be applied for parameterization and validation of simulations."}],"user_id":"34782","keyword":["Mechanical Engineering","Mechanics of Materials","Engineering (miscellaneous)","Chemical Engineering (miscellaneous)"],"publication":"Journal of Advanced Joining Processes","publisher":"Elsevier BV","quality_controlled":"1","author":[{"last_name":"Kupfer","full_name":"Kupfer, Robert","first_name":"Robert"},{"full_name":"Köhler, Daniel","first_name":"Daniel","last_name":"Köhler"},{"last_name":"Römisch","first_name":"David","full_name":"Römisch, David"},{"first_name":"Simon","full_name":"Wituschek, Simon","last_name":"Wituschek"},{"last_name":"Ewenz","first_name":"Lars","full_name":"Ewenz, Lars"},{"last_name":"Kalich","first_name":"Jan","full_name":"Kalich, Jan"},{"id":"45673","last_name":"Weiß","full_name":"Weiß, Deborah","first_name":"Deborah"},{"full_name":"Sadeghian, Behdad","first_name":"Behdad","last_name":"Sadeghian"},{"first_name":"Matthias","full_name":"Busch, Matthias","last_name":"Busch"},{"last_name":"Krüger","id":"44307","first_name":"Jan Tobias","orcid":"0000-0002-0827-9654","full_name":"Krüger, Jan Tobias"},{"last_name":"Neuser","id":"32340","first_name":"Moritz","full_name":"Neuser, Moritz"},{"first_name":"Olexandr","full_name":"Grydin, Olexandr","last_name":"Grydin","id":"43822"},{"id":"45779","last_name":"Böhnke","full_name":"Böhnke, Max","first_name":"Max"},{"first_name":"Christian Roman","full_name":"Bielak, Christian Roman","last_name":"Bielak","id":"34782"},{"full_name":"Troschitz, Juliane","first_name":"Juliane","last_name":"Troschitz"}],"date_created":"2022-12-05T21:17:22Z","status":"public","volume":5,"_id":"34215","intvolume":" 5","article_number":"100108","year":"2022","type":"journal_article","citation":{"bibtex":"@article{Kupfer_Köhler_Römisch_Wituschek_Ewenz_Kalich_Weiß_Sadeghian_Busch_Krüger_et al._2022, title={Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties}, volume={5}, DOI={10.1016/j.jajp.2022.100108}, number={100108}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Kupfer, Robert and Köhler, Daniel and Römisch, David and Wituschek, Simon and Ewenz, Lars and Kalich, Jan and Weiß, Deborah and Sadeghian, Behdad and Busch, Matthias and Krüger, Jan Tobias and et al.}, year={2022} }","mla":"Kupfer, Robert, et al. “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties.” Journal of Advanced Joining Processes, vol. 5, 100108, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100108.","chicago":"Kupfer, Robert, Daniel Köhler, David Römisch, Simon Wituschek, Lars Ewenz, Jan Kalich, Deborah Weiß, et al. “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties.” Journal of Advanced Joining Processes 5 (2022). https://doi.org/10.1016/j.jajp.2022.100108.","apa":"Kupfer, R., Köhler, D., Römisch, D., Wituschek, S., Ewenz, L., Kalich, J., Weiß, D., Sadeghian, B., Busch, M., Krüger, J. T., Neuser, M., Grydin, O., Böhnke, M., Bielak, C. R., & Troschitz, J. (2022). Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties. Journal of Advanced Joining Processes, 5, Article 100108. https://doi.org/10.1016/j.jajp.2022.100108","ama":"Kupfer R, Köhler D, Römisch D, et al. Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties. Journal of Advanced Joining Processes. 2022;5. doi:10.1016/j.jajp.2022.100108","ieee":"R. Kupfer et al., “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties,” Journal of Advanced Joining Processes, vol. 5, Art. no. 100108, 2022, doi: 10.1016/j.jajp.2022.100108.","short":"R. Kupfer, D. Köhler, D. Römisch, S. Wituschek, L. Ewenz, J. Kalich, D. Weiß, B. Sadeghian, M. Busch, J.T. Krüger, M. Neuser, O. Grydin, M. Böhnke, C.R. Bielak, J. Troschitz, Journal of Advanced Joining Processes 5 (2022)."}},{"doi":"10.48447/BR-2021-025","_id":"24006","date_updated":"2023-02-13T09:27:01Z","conference":{"start_date":"2020-02-18","name":"Arbeitskreis: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen","location":"Bremen","end_date":"2020-02-19"},"language":[{"iso":"ger"}],"year":"2021","type":"conference","citation":{"chicago":"Weiß, Deborah, Britta Schramm, Moritz Neuser, Olexandr Grydin, and Gunter Kullmer. “Experimentelle bruchmechanische Untersuchung eines clinchgeeigneten Bleches aus HCT590X mithilfe einer neuen Probengeometrie,” DVM-Bericht 253:231–40, 2021. https://doi.org/10.48447/BR-2021-025.","apa":"Weiß, D., Schramm, B., Neuser, M., Grydin, O., & Kullmer, G. (2021). Experimentelle bruchmechanische Untersuchung eines clinchgeeigneten Bleches aus HCT590X mithilfe einer neuen Probengeometrie. DVM-Bericht 253, 231–240. https://doi.org/10.48447/BR-2021-025","ama":"Weiß D, Schramm B, Neuser M, Grydin O, Kullmer G. Experimentelle bruchmechanische Untersuchung eines clinchgeeigneten Bleches aus HCT590X mithilfe einer neuen Probengeometrie. In: Vol DVM-Bericht 253. ; 2021:231-240. doi:10.48447/BR-2021-025","mla":"Weiß, Deborah, et al. Experimentelle bruchmechanische Untersuchung eines clinchgeeigneten Bleches aus HCT590X mithilfe einer neuen Probengeometrie. 2021, pp. 231–40, doi:10.48447/BR-2021-025.","bibtex":"@inproceedings{Weiß_Schramm_Neuser_Grydin_Kullmer_2021, title={Experimentelle bruchmechanische Untersuchung eines clinchgeeigneten Bleches aus HCT590X mithilfe einer neuen Probengeometrie}, volume={DVM-Bericht 253}, DOI={10.48447/BR-2021-025}, author={Weiß, Deborah and Schramm, Britta and Neuser, Moritz and Grydin, Olexandr and Kullmer, Gunter}, year={2021}, pages={231–240} }","short":"D. Weiß, B. Schramm, M. Neuser, O. Grydin, G. Kullmer, in: 2021, pp. 231–240.","ieee":"D. Weiß, B. Schramm, M. Neuser, O. Grydin, and G. Kullmer, “Experimentelle bruchmechanische Untersuchung eines clinchgeeigneten Bleches aus HCT590X mithilfe einer neuen Probengeometrie,” Bremen, 2021, vol. DVM-Bericht 253, pp. 231–240, doi: 10.48447/BR-2021-025."},"page":"231-240","user_id":"32340","title":"Experimentelle bruchmechanische Untersuchung eines clinchgeeigneten Bleches aus HCT590X mithilfe einer neuen Probengeometrie","status":"public","date_created":"2021-09-09T09:41:40Z","project":[{"_id":"130","grant_number":"418701707","name":"TRR 285: TRR 285"},{"_id":"143","name":"TRR 285 – B04: TRR 285 - Subproject B04"},{"_id":"131","name":"TRR 285 - A: TRR 285 - Project Area A"},{"_id":"136","name":"TRR 285 – A02: TRR 285 - Subproject A02"},{"_id":"132","name":"TRR 285 - B: TRR 285 - Project Area B"}],"volume":"DVM-Bericht 253","author":[{"id":"45673","last_name":"Weiß","full_name":"Weiß, Deborah","first_name":"Deborah"},{"id":"4668","last_name":"Schramm","full_name":"Schramm, Britta","first_name":"Britta"},{"id":"32340","last_name":"Neuser","full_name":"Neuser, Moritz","first_name":"Moritz"},{"full_name":"Grydin, Olexandr","first_name":"Olexandr","id":"43822","last_name":"Grydin"},{"full_name":"Kullmer, Gunter","first_name":"Gunter","id":"291","last_name":"Kullmer"}],"department":[{"_id":"158"},{"_id":"143"},{"_id":"630"}]},{"date_updated":"2024-03-14T15:24:24Z","_id":"24535","doi":"10.3390/met11081304","article_number":"1304","year":"2021","type":"journal_article","citation":{"ama":"Neuser M, Grydin O, Andreiev A, Schaper M. Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy. Metals. Published online 2021. doi:10.3390/met11081304","apa":"Neuser, M., Grydin, O., Andreiev, A., & Schaper, M. (2021). Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy. Metals, Article 1304. https://doi.org/10.3390/met11081304","chicago":"Neuser, Moritz, Olexandr Grydin, Anatolii Andreiev, and Mirko Schaper. “Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy.” Metals, 2021. https://doi.org/10.3390/met11081304.","mla":"Neuser, Moritz, et al. “Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy.” Metals, 1304, 2021, doi:10.3390/met11081304.","bibtex":"@article{Neuser_Grydin_Andreiev_Schaper_2021, title={Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy}, DOI={10.3390/met11081304}, number={1304}, journal={Metals}, author={Neuser, Moritz and Grydin, Olexandr and Andreiev, Anatolii and Schaper, Mirko}, year={2021} }","short":"M. Neuser, O. Grydin, A. Andreiev, M. Schaper, Metals (2021).","ieee":"M. Neuser, O. Grydin, A. Andreiev, and M. Schaper, “Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy,” Metals, Art. no. 1304, 2021, doi: 10.3390/met11081304."},"language":[{"iso":"eng"}],"abstract":[{"text":"Implementing the concept of mixed construction in modern automotive engineering requires the joining of sheet metal or extruded profiles with cast components made from different materials. As weight reduction is desired, these cast components are usually made from high-strength aluminium alloys of the Al-Si (Mn, Mg) system, which have limited weldability. The mechanical joinability of the cast components depends on their ductility, which is influenced by the microstructure. High-strength cast aluminium alloys have relatively low ductility, which leads to cracking of the joints. This limits the range of applications for cast aluminium alloys. In this study, an aluminium alloy of the Al-Si system AlSi9 is used to investigate relationships between solidification conditions during the sand casting process, microstructure, mechanical properties, and joinability. The demonstrator is a stepped plate with a minimum thickness of 2.0 mm and a maximum thickness of 4.0 mm, whereas the thickness difference between neighbour steps amounts to 0.5 mm. During casting trials, the solidification rates for different plate steps were measured. The microscopic investigations reveal a correlation between solidification rates and microstructure parameters such as secondary dendrite arm spacing. Furthermore, mechanical properties and the mechanical joinability are investigated.","lang":"eng"}],"title":"Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy","user_id":"32340","publication":"Metals","department":[{"_id":"9"},{"_id":"158"},{"_id":"630"}],"author":[{"full_name":"Neuser, Moritz","first_name":"Moritz","id":"32340","last_name":"Neuser"},{"first_name":"Olexandr","full_name":"Grydin, Olexandr","last_name":"Grydin","id":"43822"},{"full_name":"Andreiev, Anatolii","first_name":"Anatolii","id":"50215","last_name":"Andreiev"},{"last_name":"Schaper","id":"43720","first_name":"Mirko","full_name":"Schaper, Mirko"}],"quality_controlled":"1","publication_identifier":{"issn":["2075-4701"]},"publication_status":"published","project":[{"_id":"130","name":"TRR 285: TRR 285","grant_number":"418701707"},{"name":"TRR 285 - A: TRR 285 - Project Area A","_id":"131"},{"name":"TRR 285 – A02: TRR 285 - Subproject A02","_id":"136"}],"date_created":"2021-09-15T18:20:14Z","status":"public"},{"date_updated":"2024-03-14T15:23:15Z","_id":"24537","doi":"10.1088/1757-899x/1157/1/012005","article_number":"012005","year":"2021","type":"journal_article","citation":{"mla":"Neuser, Moritz, et al. “Joining Suitability of Cast Aluminium for Self-Piercing Riveting.” IOP Conference Series: Materials Science and Engineering, 012005, 2021, doi:10.1088/1757-899x/1157/1/012005.","bibtex":"@article{Neuser_Kappe_Busch_Grydin_Bobbert_Schaper_Meschut_Hausotte_2021, title={Joining suitability of cast aluminium for self-piercing riveting}, DOI={10.1088/1757-899x/1157/1/012005}, number={012005}, journal={IOP Conference Series: Materials Science and Engineering}, author={Neuser, Moritz and Kappe, Fabian and Busch, M and Grydin, Olexandr and Bobbert, Mathias and Schaper, Mirko and Meschut, Gerson and Hausotte, T}, year={2021} }","apa":"Neuser, M., Kappe, F., Busch, M., Grydin, O., Bobbert, M., Schaper, M., Meschut, G., & Hausotte, T. (2021). Joining suitability of cast aluminium for self-piercing riveting. IOP Conference Series: Materials Science and Engineering, Article 012005. https://doi.org/10.1088/1757-899x/1157/1/012005","ama":"Neuser M, Kappe F, Busch M, et al. Joining suitability of cast aluminium for self-piercing riveting. IOP Conference Series: Materials Science and Engineering. Published online 2021. doi:10.1088/1757-899x/1157/1/012005","chicago":"Neuser, Moritz, Fabian Kappe, M Busch, Olexandr Grydin, Mathias Bobbert, Mirko Schaper, Gerson Meschut, and T Hausotte. “Joining Suitability of Cast Aluminium for Self-Piercing Riveting.” IOP Conference Series: Materials Science and Engineering, 2021. https://doi.org/10.1088/1757-899x/1157/1/012005.","ieee":"M. Neuser et al., “Joining suitability of cast aluminium for self-piercing riveting,” IOP Conference Series: Materials Science and Engineering, Art. no. 012005, 2021, doi: 10.1088/1757-899x/1157/1/012005.","short":"M. Neuser, F. Kappe, M. Busch, O. Grydin, M. Bobbert, M. Schaper, G. Meschut, T. Hausotte, IOP Conference Series: Materials Science and Engineering (2021)."},"language":[{"iso":"eng"}],"title":"Joining suitability of cast aluminium for self-piercing riveting","user_id":"32340","publication":"IOP Conference Series: Materials Science and Engineering","department":[{"_id":"9"},{"_id":"158"},{"_id":"157"},{"_id":"630"}],"author":[{"first_name":"Moritz","full_name":"Neuser, Moritz","last_name":"Neuser","id":"32340"},{"full_name":"Kappe, Fabian","first_name":"Fabian","id":"66459","last_name":"Kappe"},{"first_name":"M","full_name":"Busch, M","last_name":"Busch"},{"last_name":"Grydin","id":"43822","first_name":"Olexandr","full_name":"Grydin, Olexandr"},{"full_name":"Bobbert, Mathias","first_name":"Mathias","id":"7850","last_name":"Bobbert"},{"full_name":"Schaper, Mirko","first_name":"Mirko","id":"43720","last_name":"Schaper"},{"last_name":"Meschut","id":"32056","first_name":"Gerson","full_name":"Meschut, Gerson","orcid":"0000-0002-2763-1246"},{"full_name":"Hausotte, T","first_name":"T","last_name":"Hausotte"}],"quality_controlled":"1","publication_status":"published","publication_identifier":{"issn":["1757-8981","1757-899X"]},"project":[{"_id":"130","name":"TRR 285: TRR 285","grant_number":"418701707"},{"_id":"131","name":"TRR 285 - A: TRR 285 - Project Area A"},{"_id":"133","name":"TRR 285 - C: TRR 285 - Project Area C"},{"_id":"136","name":"TRR 285 – A02: TRR 285 - Subproject A02"},{"_id":"146","name":"TRR 285 – C02: TRR 285 - Subproject C02"},{"_id":"149","name":"TRR 285 – C05: TRR 285 - Subproject C05"}],"date_created":"2021-09-15T18:22:16Z","status":"public"}]