[{"date_created":"2026-08-06T10:14:38Z","department":[{"_id":"9"},{"_id":"952"},{"_id":"321"}],"type":"journal_article","issue":"8","publication":"Metals","abstract":[{"lang":"eng","text":"<jats:p>Investigating crack growth in sheet metal originating from clinched joints is a major part of predicting the service life of mechanically joined structures. Clinching allows different materials to be joined together. A key task in this context is to perform crack growth simulations in the vicinity of clinched joints considering different load and environmental conditions. This requires formulaic descriptions of the fatigue crack growth rate curves for the materials used. For this purpose, fatigue crack growth rate curves for different R-ratios and temperatures are determined experimentally. Generally, these fatigue crack growth rate curves can be described very well using a novel two-part exponential approach for the formulaic description of fatigue crack growth rate curves developed at Applied Mechanics of Paderborn University (FAM). In this case, three parameters are sufficient to describe the fatigue crack growth rate curves. For the material HCT590X, which is frequently used in clinched joints, it is shown as an example how the parameters vary with the R-ratio and the temperature. In addition, at high crack growth rates, a significant rise in the fatigue crack growth rate curve sometimes occurs at both low and high temperatures. To account for this feature, the two-part exponential approach can be expanded to include a third part.</jats:p>"}],"language":[{"iso":"eng"}],"article_number":"835","doi":"10.3390/met16080835","author":[{"id":"291","full_name":"Kullmer, Gunter","first_name":"Gunter","last_name":"Kullmer"},{"id":"57245","last_name":"Krome","first_name":"Sven","full_name":"Krome, Sven"},{"first_name":"Deborah","last_name":"Weiß","full_name":"Weiß, Deborah","id":"45673"},{"last_name":"Schramm","first_name":"Britta","full_name":"Schramm, Britta","id":"4668"},{"id":"106876","full_name":"Ostwald, Richard","first_name":"Richard","last_name":"Ostwald","orcid":"0000-0003-2147-8444"}],"publication_identifier":{"issn":["2075-4701"]},"title":"Influence of the R-Ratio and the Temperature on the Coefficients of a Novel Exponential Approach for the Formulaic Description of Fatigue Crack Growth Rate Curves","year":"2026","intvolume":"        16","publication_status":"published","date_updated":"2026-08-06T10:17:54Z","citation":{"ama":"Kullmer G, Krome S, Weiß D, Schramm B, Ostwald R. Influence of the R-Ratio and the Temperature on the Coefficients of a Novel Exponential Approach for the Formulaic Description of Fatigue Crack Growth Rate Curves. <i>Metals</i>. 2026;16(8). doi:<a href=\"https://doi.org/10.3390/met16080835\">10.3390/met16080835</a>","bibtex":"@article{Kullmer_Krome_Weiß_Schramm_Ostwald_2026, title={Influence of the R-Ratio and the Temperature on the Coefficients of a Novel Exponential Approach for the Formulaic Description of Fatigue Crack Growth Rate Curves}, volume={16}, DOI={<a href=\"https://doi.org/10.3390/met16080835\">10.3390/met16080835</a>}, number={8835}, journal={Metals}, publisher={MDPI AG}, author={Kullmer, Gunter and Krome, Sven and Weiß, Deborah and Schramm, Britta and Ostwald, Richard}, year={2026} }","mla":"Kullmer, Gunter, et al. “Influence of the R-Ratio and the Temperature on the Coefficients of a Novel Exponential Approach for the Formulaic Description of Fatigue Crack Growth Rate Curves.” <i>Metals</i>, vol. 16, no. 8, 835, MDPI AG, 2026, doi:<a href=\"https://doi.org/10.3390/met16080835\">10.3390/met16080835</a>.","short":"G. Kullmer, S. Krome, D. Weiß, B. Schramm, R. Ostwald, Metals 16 (2026).","chicago":"Kullmer, Gunter, Sven Krome, Deborah Weiß, Britta Schramm, and Richard Ostwald. “Influence of the R-Ratio and the Temperature on the Coefficients of a Novel Exponential Approach for the Formulaic Description of Fatigue Crack Growth Rate Curves.” <i>Metals</i> 16, no. 8 (2026). <a href=\"https://doi.org/10.3390/met16080835\">https://doi.org/10.3390/met16080835</a>.","apa":"Kullmer, G., Krome, S., Weiß, D., Schramm, B., &#38; Ostwald, R. (2026). Influence of the R-Ratio and the Temperature on the Coefficients of a Novel Exponential Approach for the Formulaic Description of Fatigue Crack Growth Rate Curves. <i>Metals</i>, <i>16</i>(8), Article 835. <a href=\"https://doi.org/10.3390/met16080835\">https://doi.org/10.3390/met16080835</a>","ieee":"G. Kullmer, S. Krome, D. Weiß, B. Schramm, and R. Ostwald, “Influence of the R-Ratio and the Temperature on the Coefficients of a Novel Exponential Approach for the Formulaic Description of Fatigue Crack Growth Rate Curves,” <i>Metals</i>, vol. 16, no. 8, Art. no. 835, 2026, doi: <a href=\"https://doi.org/10.3390/met16080835\">10.3390/met16080835</a>."},"project":[{"_id":"132","name":"TRR 285 - Project Area B"},{"name":"TRR 285 - Subproject B04","_id":"143"},{"_id":"130","name":"TRR 285:  Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten"}],"quality_controlled":"1","_id":"66673","publisher":"MDPI AG","volume":16,"user_id":"85414","status":"public"},{"type":"research_data","department":[{"_id":"9"},{"_id":"143"}],"date_created":"2026-03-30T11:00:23Z","citation":{"mla":"Kullmer, Gunter, et al. <i>BESCHREIBUNG DES R- UND DES TEMPERATUREINFLUSSES SOWIE DES EINLAUFVERHALTENS BEI EXPERIMENTELL BESTIMMTEN RISSFORTSCHRITTSKURVEN MIT DEM EXPONENTIALANSATZ</i>. LibreCat University, 2025, doi:<a href=\"https://doi.org/10.48447/BR-2025-492\">https://doi.org/10.48447/BR-2025-492</a>.","bibtex":"@book{Kullmer_Weiß_Duffe_Schramm_Ostwald_2025, title={BESCHREIBUNG DES R- UND DES TEMPERATUREINFLUSSES SOWIE DES EINLAUFVERHALTENS BEI EXPERIMENTELL BESTIMMTEN RISSFORTSCHRITTSKURVEN MIT DEM EXPONENTIALANSATZ}, DOI={<a href=\"https://doi.org/10.48447/BR-2025-492\">https://doi.org/10.48447/BR-2025-492</a>}, publisher={LibreCat University}, author={Kullmer, Gunter and Weiß, Deborah and Duffe, Tobias and Schramm, Britta and Ostwald, Richard}, year={2025} }","ama":"Kullmer G, Weiß D, Duffe T, Schramm B, Ostwald R. <i>BESCHREIBUNG DES R- UND DES TEMPERATUREINFLUSSES SOWIE DES EINLAUFVERHALTENS BEI EXPERIMENTELL BESTIMMTEN RISSFORTSCHRITTSKURVEN MIT DEM EXPONENTIALANSATZ</i>. LibreCat University; 2025. doi:<a href=\"https://doi.org/10.48447/BR-2025-492\">https://doi.org/10.48447/BR-2025-492</a>","ieee":"G. Kullmer, D. Weiß, T. Duffe, B. Schramm, and R. Ostwald, <i>BESCHREIBUNG DES R- UND DES TEMPERATUREINFLUSSES SOWIE DES EINLAUFVERHALTENS BEI EXPERIMENTELL BESTIMMTEN RISSFORTSCHRITTSKURVEN MIT DEM EXPONENTIALANSATZ</i>. LibreCat University, 2025.","apa":"Kullmer, G., Weiß, D., Duffe, T., Schramm, B., &#38; Ostwald, R. (2025). <i>BESCHREIBUNG DES R- UND DES TEMPERATUREINFLUSSES SOWIE DES EINLAUFVERHALTENS BEI EXPERIMENTELL BESTIMMTEN RISSFORTSCHRITTSKURVEN MIT DEM EXPONENTIALANSATZ</i>. LibreCat University. <a href=\"https://doi.org/10.48447/BR-2025-492\">https://doi.org/10.48447/BR-2025-492</a>","short":"G. Kullmer, D. Weiß, T. Duffe, B. Schramm, R. Ostwald, BESCHREIBUNG DES R- UND DES TEMPERATUREINFLUSSES SOWIE DES EINLAUFVERHALTENS BEI EXPERIMENTELL BESTIMMTEN RISSFORTSCHRITTSKURVEN MIT DEM EXPONENTIALANSATZ, LibreCat University, 2025.","chicago":"Kullmer, Gunter, Deborah Weiß, Tobias Duffe, Britta Schramm, and Richard Ostwald. <i>BESCHREIBUNG DES R- UND DES TEMPERATUREINFLUSSES SOWIE DES EINLAUFVERHALTENS BEI EXPERIMENTELL BESTIMMTEN RISSFORTSCHRITTSKURVEN MIT DEM EXPONENTIALANSATZ</i>. LibreCat University, 2025. <a href=\"https://doi.org/10.48447/BR-2025-492\">https://doi.org/10.48447/BR-2025-492</a>."},"user_id":"85414","doi":"https://doi.org/10.48447/BR-2025-492","publisher":"LibreCat University","_id":"65221","date_updated":"2026-04-07T04:35:27Z","title":"BESCHREIBUNG DES R- UND DES TEMPERATUREINFLUSSES SOWIE DES EINLAUFVERHALTENS BEI EXPERIMENTELL BESTIMMTEN RISSFORTSCHRITTSKURVEN MIT DEM EXPONENTIALANSATZ","year":"2025","status":"public","author":[{"id":"291","full_name":"Kullmer, Gunter","first_name":"Gunter","last_name":"Kullmer"},{"last_name":"Weiß","first_name":"Deborah","full_name":"Weiß, Deborah","id":"45673"},{"full_name":"Duffe, Tobias","last_name":"Duffe","first_name":"Tobias","id":"41322"},{"id":"4668","full_name":"Schramm, Britta","last_name":"Schramm","first_name":"Britta"},{"id":"106876","full_name":"Ostwald, Richard","first_name":"Richard","last_name":"Ostwald","orcid":"0000-0003-2147-8444"}]},{"citation":{"mla":"Krome, Sven, et al. “Validation and Verification of Novel Three-Dimensional Crack Growth Simulation Software GmshCrack3D.” <i>Applied Sciences</i>, vol. 16, no. 1, 384, MDPI AG, 2025, doi:<a href=\"https://doi.org/10.3390/app16010384\">10.3390/app16010384</a>.","ama":"Krome S, Duffe T, Kullmer G, Schramm B, Ostwald R. Validation and Verification of Novel Three-Dimensional Crack Growth Simulation Software GmshCrack3D. <i>Applied Sciences</i>. 2025;16(1). doi:<a href=\"https://doi.org/10.3390/app16010384\">10.3390/app16010384</a>","bibtex":"@article{Krome_Duffe_Kullmer_Schramm_Ostwald_2025, title={Validation and Verification of Novel Three-Dimensional Crack Growth Simulation Software GmshCrack3D}, volume={16}, DOI={<a href=\"https://doi.org/10.3390/app16010384\">10.3390/app16010384</a>}, number={1384}, journal={Applied Sciences}, publisher={MDPI AG}, author={Krome, Sven and Duffe, Tobias and Kullmer, Gunter and Schramm, Britta and Ostwald, Richard}, year={2025} }","apa":"Krome, S., Duffe, T., Kullmer, G., Schramm, B., &#38; Ostwald, R. (2025). Validation and Verification of Novel Three-Dimensional Crack Growth Simulation Software GmshCrack3D. <i>Applied Sciences</i>, <i>16</i>(1), Article 384. <a href=\"https://doi.org/10.3390/app16010384\">https://doi.org/10.3390/app16010384</a>","ieee":"S. Krome, T. Duffe, G. Kullmer, B. Schramm, and R. Ostwald, “Validation and Verification of Novel Three-Dimensional Crack Growth Simulation Software GmshCrack3D,” <i>Applied Sciences</i>, vol. 16, no. 1, Art. no. 384, 2025, doi: <a href=\"https://doi.org/10.3390/app16010384\">10.3390/app16010384</a>.","chicago":"Krome, Sven, Tobias Duffe, Gunter Kullmer, Britta Schramm, and Richard Ostwald. “Validation and Verification of Novel Three-Dimensional Crack Growth Simulation Software GmshCrack3D.” <i>Applied Sciences</i> 16, no. 1 (2025). <a href=\"https://doi.org/10.3390/app16010384\">https://doi.org/10.3390/app16010384</a>.","short":"S. Krome, T. Duffe, G. Kullmer, B. Schramm, R. Ostwald, Applied Sciences 16 (2025)."},"project":[{"_id":"132","name":"TRR 285 - Project Area B"},{"_id":"143","name":"TRR 285 - Subproject B04"},{"name":"TRR 285:  Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten","_id":"130"}],"quality_controlled":"1","status":"public","publisher":"MDPI AG","_id":"63662","volume":16,"user_id":"7850","issue":"1","publication":"Applied Sciences","abstract":[{"text":"The accurate prediction of crack initiation and propagation is essential for assessing the structural integrity of mechanically joined components and other complex assemblies. To overcome the limitations of existing finite element tools, a modular Python framework has been developed to automate three-dimensional crack growth simulations. The program combines geometric reconstruction, adaptive remeshing, and the numerical evaluation of fracture mechanics parameters within a single, fully automated workflow. The framework builds on open-source components and remains solver-independent, enabling straightforward integration with commercial or research finite element codes. A dedicated sequence of modules performs all required steps, from mesh separation and crack insertion to local submodeling, stress and displacement mapping, and iterative crack-front update, without manual interaction. The methodology was verified using a mini-compact tension (Mini-CT) specimen as a benchmark case. The numerical results demonstrate the accurate reproduction of stress intensity factors and energy release rates while achieving high computational efficiency through localized refinement. The developed approach provides a robust basis for crack growth simulations of geometrically complex or residual stress-affected structures. Its high degree of automation and flexibility makes it particularly suited for analyzing cracks in clinched and riveted joints, supporting the predictive design and durability assessment of joined lightweight structures.","lang":"eng"}],"date_created":"2026-01-20T08:47:40Z","department":[{"_id":"9"},{"_id":"952"},{"_id":"321"}],"type":"journal_article","publication_identifier":{"issn":["2076-3417"]},"author":[{"id":"57245","full_name":"Krome, Sven","last_name":"Krome","first_name":"Sven"},{"full_name":"Duffe, Tobias","first_name":"Tobias","last_name":"Duffe","id":"41322"},{"first_name":"Gunter","last_name":"Kullmer","full_name":"Kullmer, Gunter","id":"291"},{"full_name":"Schramm, Britta","last_name":"Schramm","first_name":"Britta","id":"4668"},{"id":"106876","full_name":"Ostwald, Richard","orcid":"0000-0003-2147-8444","last_name":"Ostwald","first_name":"Richard"}],"year":"2025","title":"Validation and Verification of Novel Three-Dimensional Crack Growth Simulation Software GmshCrack3D","intvolume":"        16","date_updated":"2026-05-12T12:46:22Z","publication_status":"published","language":[{"iso":"eng"}],"article_number":"384","doi":"10.3390/app16010384"},{"status":"public","user_id":"45673","volume":296,"_id":"51737","publisher":"Elsevier BV","project":[{"grant_number":"418701707","_id":"130","name":"TRR 285: TRR 285"},{"name":"TRR 285 - B: TRR 285 - Project Area B","_id":"132"},{"name":"TRR 285 – B04: TRR 285 - Subproject B04","_id":"143"}],"citation":{"short":"G. Kullmer, D. Weiß, B. Schramm, Engineering Fracture Mechanics 296 (2024).","chicago":"Kullmer, Gunter, Deborah Weiß, and Britta Schramm. “An Alternative and Robust Formulation of the Fatigue Crack Growth Rate Curve for Long Cracks.” <i>Engineering Fracture Mechanics</i> 296 (2024). <a href=\"https://doi.org/10.1016/j.engfracmech.2023.109826\">https://doi.org/10.1016/j.engfracmech.2023.109826</a>.","apa":"Kullmer, G., Weiß, D., &#38; Schramm, B. (2024). An alternative and robust formulation of the fatigue crack growth rate curve for long cracks. <i>Engineering Fracture Mechanics</i>, <i>296</i>, Article 109826. <a href=\"https://doi.org/10.1016/j.engfracmech.2023.109826\">https://doi.org/10.1016/j.engfracmech.2023.109826</a>","ieee":"G. Kullmer, D. Weiß, and B. Schramm, “An alternative and robust formulation of the fatigue crack growth rate curve for long cracks,” <i>Engineering Fracture Mechanics</i>, vol. 296, Art. no. 109826, 2024, doi: <a href=\"https://doi.org/10.1016/j.engfracmech.2023.109826\">10.1016/j.engfracmech.2023.109826</a>.","ama":"Kullmer G, Weiß D, Schramm B. An alternative and robust formulation of the fatigue crack growth rate curve for long cracks. <i>Engineering Fracture Mechanics</i>. 2024;296. doi:<a href=\"https://doi.org/10.1016/j.engfracmech.2023.109826\">10.1016/j.engfracmech.2023.109826</a>","bibtex":"@article{Kullmer_Weiß_Schramm_2024, title={An alternative and robust formulation of the fatigue crack growth rate curve for long cracks}, volume={296}, DOI={<a href=\"https://doi.org/10.1016/j.engfracmech.2023.109826\">10.1016/j.engfracmech.2023.109826</a>}, number={109826}, journal={Engineering Fracture Mechanics}, publisher={Elsevier BV}, author={Kullmer, Gunter and Weiß, Deborah and Schramm, Britta}, year={2024} }","mla":"Kullmer, Gunter, et al. “An Alternative and Robust Formulation of the Fatigue Crack Growth Rate Curve for Long Cracks.” <i>Engineering Fracture Mechanics</i>, vol. 296, 109826, Elsevier BV, 2024, doi:<a href=\"https://doi.org/10.1016/j.engfracmech.2023.109826\">10.1016/j.engfracmech.2023.109826</a>."},"publication_status":"published","date_updated":"2024-02-22T09:55:31Z","intvolume":"       296","year":"2024","title":"An alternative and robust formulation of the fatigue crack growth rate curve for long cracks","publication_identifier":{"issn":["0013-7944"]},"author":[{"full_name":"Kullmer, Gunter","first_name":"Gunter","last_name":"Kullmer","id":"291"},{"full_name":"Weiß, Deborah","first_name":"Deborah","last_name":"Weiß","id":"45673"},{"id":"4668","last_name":"Schramm","first_name":"Britta","full_name":"Schramm, Britta"}],"doi":"10.1016/j.engfracmech.2023.109826","article_number":"109826","language":[{"iso":"eng"}],"publication":"Engineering Fracture Mechanics","type":"journal_article","keyword":["Mechanical Engineering","Mechanics of Materials","General Materials Science"],"department":[{"_id":"143"},{"_id":"630"}],"date_created":"2024-02-22T09:35:01Z"},{"type":"conference","department":[{"_id":"143"}],"date_created":"2024-04-10T07:58:29Z","project":[{"name":"TRR 285: TRR 285","_id":"130","grant_number":"418701707"},{"_id":"132","name":"TRR 285 - B: TRR 285 - Project Area B"},{"name":"TRR 285 – B04: TRR 285 - Subproject B04","_id":"143"}],"citation":{"mla":"Kullmer, Gunter, et al. <i>Weiterentwicklung des Exponentialansatzes zur Beschreibung von Rissfortschrittskurven</i>. Deutscher Verband für Materialforschung und –prüfung e.V., 2024, doi:<a href=\"https://doi.org/10.48447/BR-2024-369\">10.48447/BR-2024-369</a>.","ama":"Kullmer G, Weiß D, Schramm B. Weiterentwicklung des Exponentialansatzes zur Beschreibung von Rissfortschrittskurven. In: Deutscher Verband für Materialforschung und –prüfung e.V.; 2024. doi:<a href=\"https://doi.org/10.48447/BR-2024-369\">10.48447/BR-2024-369</a>","bibtex":"@inproceedings{Kullmer_Weiß_Schramm_2024, title={Weiterentwicklung des Exponentialansatzes zur Beschreibung von Rissfortschrittskurven}, DOI={<a href=\"https://doi.org/10.48447/BR-2024-369\">10.48447/BR-2024-369</a>}, publisher={Deutscher Verband für Materialforschung und –prüfung e.V.}, author={Kullmer, Gunter and Weiß, Deborah and Schramm, Britta}, year={2024} }","apa":"Kullmer, G., Weiß, D., &#38; Schramm, B. (2024). <i>Weiterentwicklung des Exponentialansatzes zur Beschreibung von Rissfortschrittskurven</i>. 56. Tagung des DVM-Arbeitskreises Bruchmechanik und Bauteilsicherheit , Kassel. <a href=\"https://doi.org/10.48447/BR-2024-369\">https://doi.org/10.48447/BR-2024-369</a>","ieee":"G. Kullmer, D. Weiß, and B. Schramm, “Weiterentwicklung des Exponentialansatzes zur Beschreibung von Rissfortschrittskurven,” presented at the 56. Tagung des DVM-Arbeitskreises Bruchmechanik und Bauteilsicherheit , Kassel, 2024, doi: <a href=\"https://doi.org/10.48447/BR-2024-369\">10.48447/BR-2024-369</a>.","chicago":"Kullmer, Gunter, Deborah Weiß, and Britta Schramm. “Weiterentwicklung des Exponentialansatzes zur Beschreibung von Rissfortschrittskurven.” Deutscher Verband für Materialforschung und –prüfung e.V., 2024. <a href=\"https://doi.org/10.48447/BR-2024-369\">https://doi.org/10.48447/BR-2024-369</a>.","short":"G. Kullmer, D. Weiß, B. Schramm, in: Deutscher Verband für Materialforschung und –prüfung e.V., 2024."},"user_id":"45673","doi":"10.48447/BR-2024-369","language":[{"iso":"ger"}],"_id":"53394","publisher":"Deutscher Verband für Materialforschung und –prüfung e.V.","date_updated":"2024-04-10T08:30:45Z","title":"Weiterentwicklung des Exponentialansatzes zur Beschreibung von Rissfortschrittskurven","status":"public","year":"2024","author":[{"id":"291","last_name":"Kullmer","first_name":"Gunter","full_name":"Kullmer, Gunter"},{"id":"45673","full_name":"Weiß, Deborah","first_name":"Deborah","last_name":"Weiß"},{"id":"4668","first_name":"Britta","last_name":"Schramm","full_name":"Schramm, Britta"}],"conference":{"start_date":"2024-02-20","name":"56. Tagung des DVM-Arbeitskreises Bruchmechanik und Bauteilsicherheit ","location":"Kassel","end_date":"2024-02-21"}},{"citation":{"bibtex":"@inproceedings{Weiß_Duffe_Buczek_Kullmer_Schramm_2023, title={Bruchmechanische Untersuchung des Dualphasenstahls HCT590X unter Temperatureinfluss}, DOI={<a href=\"https://doi.org/10.48447/WP-2023-244\">10.48447/WP-2023-244</a>}, publisher={Deutscher Verband für Materialforschung und -prüfung e.V.}, author={Weiß, Deborah and Duffe, Tobias and Buczek, Moritz and Kullmer, Gunter and Schramm, Britta}, year={2023} }","ama":"Weiß D, Duffe T, Buczek M, Kullmer G, Schramm B. Bruchmechanische Untersuchung des Dualphasenstahls HCT590X unter Temperatureinfluss. In: Deutscher Verband für Materialforschung und -prüfung e.V.; 2023. doi:<a href=\"https://doi.org/10.48447/WP-2023-244\">10.48447/WP-2023-244</a>","mla":"Weiß, Deborah, et al. <i>Bruchmechanische Untersuchung des Dualphasenstahls HCT590X unter Temperatureinfluss</i>. Deutscher Verband für Materialforschung und -prüfung e.V., 2023, doi:<a href=\"https://doi.org/10.48447/WP-2023-244\">10.48447/WP-2023-244</a>.","short":"D. Weiß, T. Duffe, M. Buczek, G. Kullmer, B. Schramm, in: Deutscher Verband für Materialforschung und -prüfung e.V., 2023.","chicago":"Weiß, Deborah, Tobias Duffe, Moritz Buczek, Gunter Kullmer, and Britta Schramm. “Bruchmechanische Untersuchung des Dualphasenstahls HCT590X unter Temperatureinfluss.” Deutscher Verband für Materialforschung und -prüfung e.V., 2023. <a href=\"https://doi.org/10.48447/WP-2023-244\">https://doi.org/10.48447/WP-2023-244</a>.","ieee":"D. Weiß, T. Duffe, M. Buczek, G. Kullmer, and B. Schramm, “Bruchmechanische Untersuchung des Dualphasenstahls HCT590X unter Temperatureinfluss,” presented at the Werkstoffprüfung 2023: Werkstoffe und Bauteile auf dem Prüfstand - Tagung, Berlin, 2023, doi: <a href=\"https://doi.org/10.48447/WP-2023-244\">10.48447/WP-2023-244</a>.","apa":"Weiß, D., Duffe, T., Buczek, M., Kullmer, G., &#38; Schramm, B. (2023). <i>Bruchmechanische Untersuchung des Dualphasenstahls HCT590X unter Temperatureinfluss</i>. Werkstoffprüfung 2023: Werkstoffe und Bauteile auf dem Prüfstand - Tagung, Berlin. <a href=\"https://doi.org/10.48447/WP-2023-244\">https://doi.org/10.48447/WP-2023-244</a>"},"project":[{"name":"TRR 285: TRR 285","_id":"130","grant_number":"418701707"},{"_id":"132","name":"TRR 285 - B: TRR 285 - Project Area B"},{"_id":"143","name":"TRR 285 – B04: TRR 285 - Subproject B04"}],"date_created":"2024-02-22T09:54:40Z","department":[{"_id":"143"},{"_id":"630"}],"type":"conference","author":[{"id":"45673","last_name":"Weiß","first_name":"Deborah","full_name":"Weiß, Deborah"},{"first_name":"Tobias","last_name":"Duffe","full_name":"Duffe, Tobias","id":"41322"},{"first_name":"Moritz","last_name":"Buczek","full_name":"Buczek, Moritz","id":"83727"},{"full_name":"Kullmer, Gunter","first_name":"Gunter","last_name":"Kullmer","id":"291"},{"last_name":"Schramm","first_name":"Britta","full_name":"Schramm, Britta","id":"4668"}],"conference":{"name":"Werkstoffprüfung 2023: Werkstoffe und Bauteile auf dem Prüfstand - Tagung","start_date":"2023-11-23","location":"Berlin","end_date":"2023-11-24"},"year":"2023","title":"Bruchmechanische Untersuchung des Dualphasenstahls HCT590X unter Temperatureinfluss","status":"public","publication_status":"published","date_updated":"2024-04-10T07:08:49Z","language":[{"iso":"ger"}],"_id":"51739","publisher":"Deutscher Verband für Materialforschung und -prüfung e.V.","user_id":"45673","doi":"10.48447/WP-2023-244"},{"page":"879-885","_id":"35271","publisher":"Elsevier BV","user_id":"4668","volume":42,"status":"public","conference":{"location":"Madeira","start_date":"2022-06-27","name":"European Conference on Fracture 23","end_date":"2022-07-01"},"citation":{"apa":"Weiß, D., &#38; Schramm, B. (2022). Fracture mechanical investigation of preformed metal sheets using a novel CC-specimen. <i>Procedia Structural Integrity</i>, <i>42</i>, 879–885. <a href=\"https://doi.org/10.1016/j.prostr.2022.12.111\">https://doi.org/10.1016/j.prostr.2022.12.111</a>","ieee":"D. Weiß and B. Schramm, “Fracture mechanical investigation of preformed metal sheets using a novel CC-specimen,” in <i>Procedia Structural Integrity</i>, Madeira, 2022, vol. 42, pp. 879–885, doi: <a href=\"https://doi.org/10.1016/j.prostr.2022.12.111\">10.1016/j.prostr.2022.12.111</a>.","short":"D. Weiß, B. Schramm, in: Procedia Structural Integrity, Elsevier BV, 2022, pp. 879–885.","chicago":"Weiß, Deborah, and Britta Schramm. “Fracture Mechanical Investigation of Preformed Metal Sheets Using a Novel CC-Specimen.” In <i>Procedia Structural Integrity</i>, 42:879–85. Elsevier BV, 2022. <a href=\"https://doi.org/10.1016/j.prostr.2022.12.111\">https://doi.org/10.1016/j.prostr.2022.12.111</a>.","mla":"Weiß, Deborah, and Britta Schramm. “Fracture Mechanical Investigation of Preformed Metal Sheets Using a Novel CC-Specimen.” <i>Procedia Structural Integrity</i>, vol. 42, Elsevier BV, 2022, pp. 879–85, doi:<a href=\"https://doi.org/10.1016/j.prostr.2022.12.111\">10.1016/j.prostr.2022.12.111</a>.","ama":"Weiß D, Schramm B. Fracture mechanical investigation of preformed metal sheets using a novel CC-specimen. In: <i>Procedia Structural Integrity</i>. Vol 42. Elsevier BV; 2022:879-885. doi:<a href=\"https://doi.org/10.1016/j.prostr.2022.12.111\">10.1016/j.prostr.2022.12.111</a>","bibtex":"@inproceedings{Weiß_Schramm_2022, title={Fracture mechanical investigation of preformed metal sheets using a novel CC-specimen}, volume={42}, DOI={<a href=\"https://doi.org/10.1016/j.prostr.2022.12.111\">10.1016/j.prostr.2022.12.111</a>}, booktitle={Procedia Structural Integrity}, publisher={Elsevier BV}, author={Weiß, Deborah and Schramm, Britta}, year={2022}, pages={879–885} }"},"project":[{"name":"TRR 285: TRR 285","grant_number":"418701707","_id":"130"},{"_id":"132","name":"TRR 285 - B: TRR 285 - Project Area B"},{"_id":"143","name":"TRR 285 – B04: TRR 285 - Subproject B04"}],"language":[{"iso":"eng"}],"doi":"10.1016/j.prostr.2022.12.111","title":"Fracture mechanical investigation of preformed metal sheets using a novel CC-specimen","year":"2022","publication_identifier":{"issn":["2452-3216"]},"author":[{"first_name":"Deborah","last_name":"Weiß","full_name":"Weiß, Deborah","id":"45673"},{"last_name":"Schramm","first_name":"Britta","full_name":"Schramm, Britta","id":"4668"}],"publication_status":"published","date_updated":"2023-02-07T09:36:58Z","intvolume":"        42","date_created":"2023-01-05T11:02:26Z","keyword":["General Engineering","Energy Engineering and Power Technology"],"type":"conference","department":[{"_id":"143"}],"publication":"Procedia Structural Integrity"},{"_id":"34078","publisher":"Springer Berlin Heidelberg","language":[{"iso":"eng"}],"user_id":"4668","doi":"10.1007/978-3-662-64372-3_36","author":[{"full_name":"Wittenburg, Jens","first_name":"Jens","last_name":"Wittenburg"},{"last_name":"Richard","first_name":"Hans Albert","full_name":"Richard, Hans Albert"},{"id":"4668","first_name":"Britta","last_name":"Schramm","full_name":"Schramm, Britta"}],"publication_identifier":{"isbn":["9783662643716","9783662643723"],"issn":["2522-8188","2522-8196"]},"title":"Anwendungen der Festigkeitslehre","year":"2022","status":"public","publication_status":"published","date_updated":"2023-02-07T09:35:51Z","date_created":"2022-11-14T17:33:31Z","place":"Berlin, Heidelberg","type":"book_chapter","citation":{"ieee":"J. Wittenburg, H. A. Richard, and B. Schramm, “Anwendungen der Festigkeitslehre,” in <i>Springer Reference Technik</i>, Berlin, Heidelberg: Springer Berlin Heidelberg, 2022.","apa":"Wittenburg, J., Richard, H. A., &#38; Schramm, B. (2022). Anwendungen der Festigkeitslehre. In <i>Springer Reference Technik</i>. Springer Berlin Heidelberg. <a href=\"https://doi.org/10.1007/978-3-662-64372-3_36\">https://doi.org/10.1007/978-3-662-64372-3_36</a>","chicago":"Wittenburg, Jens, Hans Albert Richard, and Britta Schramm. “Anwendungen Der Festigkeitslehre.” In <i>Springer Reference Technik</i>. Berlin, Heidelberg: Springer Berlin Heidelberg, 2022. <a href=\"https://doi.org/10.1007/978-3-662-64372-3_36\">https://doi.org/10.1007/978-3-662-64372-3_36</a>.","short":"J. Wittenburg, H.A. Richard, B. Schramm, in: Springer Reference Technik, Springer Berlin Heidelberg, Berlin, Heidelberg, 2022.","mla":"Wittenburg, Jens, et al. “Anwendungen Der Festigkeitslehre.” <i>Springer Reference Technik</i>, Springer Berlin Heidelberg, 2022, doi:<a href=\"https://doi.org/10.1007/978-3-662-64372-3_36\">10.1007/978-3-662-64372-3_36</a>.","bibtex":"@inbook{Wittenburg_Richard_Schramm_2022, place={Berlin, Heidelberg}, title={Anwendungen der Festigkeitslehre}, DOI={<a href=\"https://doi.org/10.1007/978-3-662-64372-3_36\">10.1007/978-3-662-64372-3_36</a>}, booktitle={Springer Reference Technik}, publisher={Springer Berlin Heidelberg}, author={Wittenburg, Jens and Richard, Hans Albert and Schramm, Britta}, year={2022} }","ama":"Wittenburg J, Richard HA, Schramm B. Anwendungen der Festigkeitslehre. In: <i>Springer Reference Technik</i>. Springer Berlin Heidelberg; 2022. doi:<a href=\"https://doi.org/10.1007/978-3-662-64372-3_36\">10.1007/978-3-662-64372-3_36</a>"},"publication":"Springer Reference Technik"},{"date_updated":"2023-02-08T07:47:22Z","author":[{"id":"60486","full_name":"Woodcock, Steven Clifford","first_name":"Steven Clifford","last_name":"Woodcock"},{"full_name":"Schramm, Britta","first_name":"Britta","last_name":"Schramm","id":"4668"},{"id":"291","first_name":"Gunter","last_name":"Kullmer","full_name":"Kullmer, Gunter"},{"full_name":"Richard, Hans Albert","last_name":"Richard","first_name":"Hans Albert"}],"conference":{"location":"Rostock","start_date":"2022-09-29","name":"Workshop – Zuverlässigkeit von Implantaten und Biostrukturen","end_date":"2022-09-30"},"year":"2022","status":"public","title":"Bewertung der Knochen-Schraube Verbindung im Auszugtest und unter physiologischer Belastung in der Finite Elemente Methode","user_id":"45673","_id":"41907","publisher":"Deutscher Verband für Materialforschung und -prüfung e.V.","language":[{"iso":"ger"}],"citation":{"apa":"Woodcock, S. C., Schramm, B., Kullmer, G., &#38; Richard, H. A. (2022). <i>Bewertung der Knochen-Schraube Verbindung im Auszugtest und unter physiologischer Belastung in der Finite Elemente Methode</i>. Workshop – Zuverlässigkeit von Implantaten und Biostrukturen, Rostock.","ieee":"S. C. Woodcock, B. Schramm, G. Kullmer, and H. A. Richard, “Bewertung der Knochen-Schraube Verbindung im Auszugtest und unter physiologischer Belastung in der Finite Elemente Methode,” presented at the Workshop – Zuverlässigkeit von Implantaten und Biostrukturen, Rostock, 2022.","chicago":"Woodcock, Steven Clifford, Britta Schramm, Gunter Kullmer, and Hans Albert Richard. “Bewertung der Knochen-Schraube Verbindung im Auszugtest und unter physiologischer Belastung in der Finite Elemente Methode.” Deutscher Verband für Materialforschung und -prüfung e.V., 2022.","short":"S.C. Woodcock, B. Schramm, G. Kullmer, H.A. Richard, in: Deutscher Verband für Materialforschung und -prüfung e.V., 2022.","mla":"Woodcock, Steven Clifford, et al. <i>Bewertung der Knochen-Schraube Verbindung im Auszugtest und unter physiologischer Belastung in der Finite Elemente Methode</i>. Deutscher Verband für Materialforschung und -prüfung e.V., 2022.","ama":"Woodcock SC, Schramm B, Kullmer G, Richard HA. Bewertung der Knochen-Schraube Verbindung im Auszugtest und unter physiologischer Belastung in der Finite Elemente Methode. In: Deutscher Verband für Materialforschung und -prüfung e.V.; 2022.","bibtex":"@inproceedings{Woodcock_Schramm_Kullmer_Richard_2022, title={Bewertung der Knochen-Schraube Verbindung im Auszugtest und unter physiologischer Belastung in der Finite Elemente Methode}, publisher={Deutscher Verband für Materialforschung und -prüfung e.V.}, author={Woodcock, Steven Clifford and Schramm, Britta and Kullmer, Gunter and Richard, Hans Albert}, year={2022} }"},"department":[{"_id":"143"}],"type":"conference_abstract","date_created":"2023-02-08T07:42:25Z"},{"department":[{"_id":"143"}],"type":"journal_article","keyword":["Fluid Flow and Transfer Processes","Computer Science Applications","Process Chemistry and Technology","General Engineering","Instrumentation","General Materials Science"],"date_created":"2022-12-05T21:49:48Z","abstract":[{"text":"Crack growth in structures depends on the cyclic loads applied on it, such as mechanical, thermal and contact, as well as residual stresses, etc. To provide an accurate simulation of crack growth in structures, it is of high importance to integrate all kinds of loading situations in the simulations. Adapcrack3D is a simulation program that can accurately predict the propagation of cracks in real structures. However, until now, this three-dimensional program has only considered mechanical loads and static thermal loads. Therefore, the features of Adapcrack3D have been extended by including contact loading in crack growth simulations. The numerical simulation of crack propagation with Adapcrack3D is generally carried out using FE models of structures provided by the user. For simulating models with contact loading situations, Adapcrack3D has been updated to work with FE models containing multiple parts and necessary features such as coupling and surface interactions. Because Adapcrack3D uses the submodel technique for fracture mechanical evaluations, the architecture of the submodel is also modified to simulate models with contact definitions between the crack surfaces. This paper discusses the newly implemented attribute of the program with the help of illustrative examples. The results confirm that the contact simulation in Adapcrack3D is a major step in improving the functionality of the program.","lang":"eng"}],"publication":"Applied Sciences","issue":"15","doi":"10.3390/app12157557","language":[{"iso":"eng"}],"article_number":"7557","intvolume":"        12","date_updated":"2023-04-27T10:13:44Z","publication_status":"published","author":[{"first_name":"Tintu David","last_name":"Joy","full_name":"Joy, Tintu David","id":"30821"},{"first_name":"Deborah","last_name":"Weiß","full_name":"Weiß, Deborah","id":"45673"},{"last_name":"Schramm","first_name":"Britta","full_name":"Schramm, Britta","id":"4668"},{"id":"291","full_name":"Kullmer, Gunter","first_name":"Gunter","last_name":"Kullmer"}],"publication_identifier":{"issn":["2076-3417"]},"title":"Further Development of 3D Crack Growth Simulation Program to Include Contact Loading Situations","year":"2022","project":[{"name":"TRR 285: TRR 285","grant_number":"418701707","_id":"130"},{"_id":"132","name":"TRR 285 - B: TRR 285 - Project Area B"},{"_id":"143","name":"TRR 285 – B04: TRR 285 - Subproject B04"}],"quality_controlled":"1","citation":{"short":"T.D. Joy, D. Weiß, B. Schramm, G. Kullmer, Applied Sciences 12 (2022).","chicago":"Joy, Tintu David, Deborah Weiß, Britta Schramm, and Gunter Kullmer. “Further Development of 3D Crack Growth Simulation Program to Include Contact Loading Situations.” <i>Applied Sciences</i> 12, no. 15 (2022). <a href=\"https://doi.org/10.3390/app12157557\">https://doi.org/10.3390/app12157557</a>.","apa":"Joy, T. D., Weiß, D., Schramm, B., &#38; Kullmer, G. (2022). Further Development of 3D Crack Growth Simulation Program to Include Contact Loading Situations. <i>Applied Sciences</i>, <i>12</i>(15), Article 7557. <a href=\"https://doi.org/10.3390/app12157557\">https://doi.org/10.3390/app12157557</a>","ieee":"T. D. Joy, D. Weiß, B. Schramm, and G. Kullmer, “Further Development of 3D Crack Growth Simulation Program to Include Contact Loading Situations,” <i>Applied Sciences</i>, vol. 12, no. 15, Art. no. 7557, 2022, doi: <a href=\"https://doi.org/10.3390/app12157557\">10.3390/app12157557</a>.","ama":"Joy TD, Weiß D, Schramm B, Kullmer G. Further Development of 3D Crack Growth Simulation Program to Include Contact Loading Situations. <i>Applied Sciences</i>. 2022;12(15). doi:<a href=\"https://doi.org/10.3390/app12157557\">10.3390/app12157557</a>","bibtex":"@article{Joy_Weiß_Schramm_Kullmer_2022, title={Further Development of 3D Crack Growth Simulation Program to Include Contact Loading Situations}, volume={12}, DOI={<a href=\"https://doi.org/10.3390/app12157557\">10.3390/app12157557</a>}, number={157557}, journal={Applied Sciences}, publisher={MDPI AG}, author={Joy, Tintu David and Weiß, Deborah and Schramm, Britta and Kullmer, Gunter}, year={2022} }","mla":"Joy, Tintu David, et al. “Further Development of 3D Crack Growth Simulation Program to Include Contact Loading Situations.” <i>Applied Sciences</i>, vol. 12, no. 15, 7557, MDPI AG, 2022, doi:<a href=\"https://doi.org/10.3390/app12157557\">10.3390/app12157557</a>."},"volume":12,"user_id":"45673","_id":"34224","publisher":"MDPI AG","status":"public"},{"publication":"Procedia Structural Integrity","department":[{"_id":"143"}],"type":"conference","keyword":["General Engineering","Energy Engineering and Power Technology"],"date_created":"2022-03-30T08:34:10Z","intvolume":"        39","date_updated":"2023-04-27T10:17:21Z","publication_status":"published","author":[{"full_name":"Weiß, Deborah","last_name":"Weiß","first_name":"Deborah","id":"45673"},{"full_name":"Schramm, Britta","last_name":"Schramm","first_name":"Britta","id":"4668"},{"last_name":"Kullmer","first_name":"Gunter","full_name":"Kullmer, Gunter","id":"291"}],"publication_identifier":{"issn":["2452-3216"]},"year":"2022","title":"Influence of plane mixed-mode loading on the kinking angle of clinchable metal sheets","doi":"10.1016/j.prostr.2022.03.082","language":[{"iso":"eng"}],"project":[{"name":"TRR 285: TRR 285","grant_number":"418701707","_id":"130"},{"name":"TRR 285 - B: TRR 285 - Project Area B","_id":"132"},{"_id":"143","name":"TRR 285 – B04: TRR 285 - Subproject B04"}],"citation":{"bibtex":"@inproceedings{Weiß_Schramm_Kullmer_2022, title={Influence of plane mixed-mode loading on the kinking angle of clinchable metal sheets}, volume={39}, DOI={<a href=\"https://doi.org/10.1016/j.prostr.2022.03.082\">10.1016/j.prostr.2022.03.082</a>}, booktitle={Procedia Structural Integrity}, publisher={Elsevier BV}, author={Weiß, Deborah and Schramm, Britta and Kullmer, Gunter}, year={2022}, pages={139–147} }","ama":"Weiß D, Schramm B, Kullmer G. Influence of plane mixed-mode loading on the kinking angle of clinchable metal sheets. In: <i>Procedia Structural Integrity</i>. Vol 39. Elsevier BV; 2022:139-147. doi:<a href=\"https://doi.org/10.1016/j.prostr.2022.03.082\">10.1016/j.prostr.2022.03.082</a>","mla":"Weiß, Deborah, et al. “Influence of Plane Mixed-Mode Loading on the Kinking Angle of Clinchable Metal Sheets.” <i>Procedia Structural Integrity</i>, vol. 39, Elsevier BV, 2022, pp. 139–47, doi:<a href=\"https://doi.org/10.1016/j.prostr.2022.03.082\">10.1016/j.prostr.2022.03.082</a>.","chicago":"Weiß, Deborah, Britta Schramm, and Gunter Kullmer. “Influence of Plane Mixed-Mode Loading on the Kinking Angle of Clinchable Metal Sheets.” In <i>Procedia Structural Integrity</i>, 39:139–47. Elsevier BV, 2022. <a href=\"https://doi.org/10.1016/j.prostr.2022.03.082\">https://doi.org/10.1016/j.prostr.2022.03.082</a>.","short":"D. Weiß, B. Schramm, G. Kullmer, in: Procedia Structural Integrity, Elsevier BV, 2022, pp. 139–147.","ieee":"D. Weiß, B. Schramm, and G. Kullmer, “Influence of plane mixed-mode loading on the kinking angle of clinchable metal sheets,” in <i>Procedia Structural Integrity</i>, online, 2022, vol. 39, pp. 139–147, doi: <a href=\"https://doi.org/10.1016/j.prostr.2022.03.082\">10.1016/j.prostr.2022.03.082</a>.","apa":"Weiß, D., Schramm, B., &#38; Kullmer, G. (2022). Influence of plane mixed-mode loading on the kinking angle of clinchable metal sheets. <i>Procedia Structural Integrity</i>, <i>39</i>, 139–147. <a href=\"https://doi.org/10.1016/j.prostr.2022.03.082\">https://doi.org/10.1016/j.prostr.2022.03.082</a>"},"conference":{"end_date":"2021-09-24","name":"7th International Conference on Crack Paths","start_date":"2021-09-21","location":"online"},"status":"public","volume":39,"user_id":"45673","_id":"30726","publisher":"Elsevier BV","page":"139-147"},{"citation":{"chicago":"Kullmer, Gunter, Deborah Weiß, and Britta Schramm. “Development of a Method for the Separate Measurement of the Growth of Internal Crack Tips by Means of the Potential Drop Method.” <i>Engineering Fracture Mechanics</i>, 2022. <a href=\"https://doi.org/10.1016/j.engfracmech.2022.108899\">https://doi.org/10.1016/j.engfracmech.2022.108899</a>.","short":"G. Kullmer, D. Weiß, B. Schramm, Engineering Fracture Mechanics (2022).","ieee":"G. Kullmer, D. Weiß, and B. Schramm, “Development of a method for the separate measurement of the growth of internal crack tips by means of the potential drop method,” <i>Engineering Fracture Mechanics</i>, Art. no. 108899, 2022, doi: <a href=\"https://doi.org/10.1016/j.engfracmech.2022.108899\">10.1016/j.engfracmech.2022.108899</a>.","apa":"Kullmer, G., Weiß, D., &#38; Schramm, B. (2022). Development of a method for the separate measurement of the growth of internal crack tips by means of the potential drop method. <i>Engineering Fracture Mechanics</i>, Article 108899. <a href=\"https://doi.org/10.1016/j.engfracmech.2022.108899\">https://doi.org/10.1016/j.engfracmech.2022.108899</a>","bibtex":"@article{Kullmer_Weiß_Schramm_2022, title={Development of a method for the separate measurement of the growth of internal crack tips by means of the potential drop method}, DOI={<a href=\"https://doi.org/10.1016/j.engfracmech.2022.108899\">10.1016/j.engfracmech.2022.108899</a>}, number={108899}, journal={Engineering Fracture Mechanics}, publisher={Elsevier BV}, author={Kullmer, Gunter and Weiß, Deborah and Schramm, Britta}, year={2022} }","ama":"Kullmer G, Weiß D, Schramm B. Development of a method for the separate measurement of the growth of internal crack tips by means of the potential drop method. <i>Engineering Fracture Mechanics</i>. Published online 2022. doi:<a href=\"https://doi.org/10.1016/j.engfracmech.2022.108899\">10.1016/j.engfracmech.2022.108899</a>","mla":"Kullmer, Gunter, et al. “Development of a Method for the Separate Measurement of the Growth of Internal Crack Tips by Means of the Potential Drop Method.” <i>Engineering Fracture Mechanics</i>, 108899, Elsevier BV, 2022, doi:<a href=\"https://doi.org/10.1016/j.engfracmech.2022.108899\">10.1016/j.engfracmech.2022.108899</a>."},"project":[{"name":"TRR 285: TRR 285","grant_number":"418701707","_id":"130"},{"name":"TRR 285 - B: TRR 285 - Project Area B","_id":"132"},{"name":"TRR 285 – B04: TRR 285 - Subproject B04","_id":"143"}],"quality_controlled":"1","_id":"34246","publisher":"Elsevier BV","user_id":"45673","status":"public","date_created":"2022-12-06T14:59:46Z","department":[{"_id":"143"},{"_id":"630"}],"type":"journal_article","keyword":["Mechanical Engineering","Mechanics of Materials","General Materials Science"],"publication":"Engineering Fracture Mechanics","language":[{"iso":"eng"}],"article_number":"108899","doi":"10.1016/j.engfracmech.2022.108899","author":[{"id":"291","full_name":"Kullmer, Gunter","first_name":"Gunter","last_name":"Kullmer"},{"full_name":"Weiß, Deborah","first_name":"Deborah","last_name":"Weiß","id":"45673"},{"full_name":"Schramm, Britta","first_name":"Britta","last_name":"Schramm","id":"4668"}],"publication_identifier":{"issn":["0013-7944"]},"title":"Development of a method for the separate measurement of the growth of internal crack tips by means of the potential drop method","year":"2022","publication_status":"published","date_updated":"2023-04-27T10:15:11Z"},{"language":[{"iso":"eng"}],"doi":"10.1515/mt-2022-0191","author":[{"id":"4668","full_name":"Schramm, Britta","first_name":"Britta","last_name":"Schramm"},{"full_name":"Weiß, Deborah","first_name":"Deborah","last_name":"Weiß","id":"45673"}],"publication_identifier":{"issn":["0025-5300","2195-8572"]},"year":"2022","title":"Fracture mechanical evaluation of the material HCT590X","intvolume":"        64","date_updated":"2023-04-27T10:20:38Z","publication_status":"published","date_created":"2022-12-13T15:19:58Z","department":[{"_id":"143"},{"_id":"630"}],"keyword":["Mechanical Engineering","Mechanics of Materials","General Materials Science"],"type":"journal_article","issue":"10","publication":"Materials Testing","abstract":[{"lang":"eng","text":"For a reliable, strength-compliant and fracture-resistant design of components and technical structures and for the prevention of damage cases, both the criteria of strength calculation and fracture mechanics are essential. In contrast to strength calculation the fracture mechanics assumes the existence of cracks which might further propagate due to the operational load. First, the present paper illustrates the general procedure of a fracture mechanical evaluation of fatigue cracks in order to assess practical damage cases. Fracture mechanical fundamentals which are essential for the calculation of the stress intensity factors <jats:italic>K</jats:italic>\r\n                  <jats:sub>I</jats:sub> and the experimental determination of fracture mechanical material parameters (e.g. threshold Δ<jats:italic>K</jats:italic>\r\n                  <jats:sub>I,th</jats:sub> against fatigue crack growth, crack growth rate curve) are explained in detail. The subsequent fracture mechanical evaluation on the basis of the local stress situation at the crack tip and the fracture mechanical material data is executed for different materials and selected crack problems. Hereby, the main focus is on the material HCT590X as it is the essential material being investigated by TRR285.</jats:p>"}],"_id":"34403","publisher":"Walter de Gruyter GmbH","page":"1437-1449","volume":64,"user_id":"45673","status":"public","citation":{"apa":"Schramm, B., &#38; Weiß, D. (2022). Fracture mechanical evaluation of the material HCT590X. <i>Materials Testing</i>, <i>64</i>(10), 1437–1449. <a href=\"https://doi.org/10.1515/mt-2022-0191\">https://doi.org/10.1515/mt-2022-0191</a>","ieee":"B. Schramm and D. Weiß, “Fracture mechanical evaluation of the material HCT590X,” <i>Materials Testing</i>, vol. 64, no. 10, pp. 1437–1449, 2022, doi: <a href=\"https://doi.org/10.1515/mt-2022-0191\">10.1515/mt-2022-0191</a>.","chicago":"Schramm, Britta, and Deborah Weiß. “Fracture Mechanical Evaluation of the Material HCT590X.” <i>Materials Testing</i> 64, no. 10 (2022): 1437–49. <a href=\"https://doi.org/10.1515/mt-2022-0191\">https://doi.org/10.1515/mt-2022-0191</a>.","short":"B. Schramm, D. Weiß, Materials Testing 64 (2022) 1437–1449.","mla":"Schramm, Britta, and Deborah Weiß. “Fracture Mechanical Evaluation of the Material HCT590X.” <i>Materials Testing</i>, vol. 64, no. 10, Walter de Gruyter GmbH, 2022, pp. 1437–49, doi:<a href=\"https://doi.org/10.1515/mt-2022-0191\">10.1515/mt-2022-0191</a>.","ama":"Schramm B, Weiß D. Fracture mechanical evaluation of the material HCT590X. <i>Materials Testing</i>. 2022;64(10):1437-1449. doi:<a href=\"https://doi.org/10.1515/mt-2022-0191\">10.1515/mt-2022-0191</a>","bibtex":"@article{Schramm_Weiß_2022, title={Fracture mechanical evaluation of the material HCT590X}, volume={64}, DOI={<a href=\"https://doi.org/10.1515/mt-2022-0191\">10.1515/mt-2022-0191</a>}, number={10}, journal={Materials Testing}, publisher={Walter de Gruyter GmbH}, author={Schramm, Britta and Weiß, Deborah}, year={2022}, pages={1437–1449} }"},"project":[{"name":"TRR 285: TRR 285","grant_number":"418701707","_id":"130"},{"_id":"132","name":"TRR 285 - B: TRR 285 - Project Area B"},{"_id":"143","name":"TRR 285 – B04: TRR 285 - Subproject B04"}],"quality_controlled":"1"},{"date_created":"2022-11-14T08:53:49Z","keyword":["Mechanical Engineering","Mechanics of Materials","Engineering (miscellaneous)","Chemical Engineering (miscellaneous)"],"type":"journal_article","department":[{"_id":"143"},{"_id":"157"}],"publication":"Journal of Advanced Joining Processes","article_number":"100133","language":[{"iso":"eng"}],"doi":"10.1016/j.jajp.2022.100133","year":"2022","title":"A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase","publication_identifier":{"issn":["2666-3309"]},"author":[{"id":"4668","full_name":"Schramm, Britta","last_name":"Schramm","first_name":"Britta"},{"last_name":"Martin","first_name":"Sven","full_name":"Martin, Sven","id":"38177"},{"full_name":"Steinfelder, Christian","last_name":"Steinfelder","first_name":"Christian"},{"full_name":"Bielak, Christian Roman","first_name":"Christian Roman","last_name":"Bielak","id":"34782"},{"full_name":"Brosius, Alexander","last_name":"Brosius","first_name":"Alexander"},{"id":"32056","full_name":"Meschut, Gerson","orcid":"0000-0002-2763-1246","first_name":"Gerson","last_name":"Meschut"},{"full_name":"Tröster, Thomas","last_name":"Tröster","first_name":"Thomas","id":"553"},{"full_name":"Wallmersperger, Thomas","first_name":"Thomas","last_name":"Wallmersperger"},{"last_name":"Mergheim","first_name":"Julia","full_name":"Mergheim, Julia"}],"publication_status":"published","date_updated":"2026-05-12T12:59:39Z","intvolume":"         6","citation":{"mla":"Schramm, Britta, et al. “A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase.” <i>Journal of Advanced Joining Processes</i>, vol. 6, 100133, Elsevier BV, 2022, doi:<a href=\"https://doi.org/10.1016/j.jajp.2022.100133\">10.1016/j.jajp.2022.100133</a>.","ama":"Schramm B, Martin S, Steinfelder C, et al. A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase. <i>Journal of Advanced Joining Processes</i>. 2022;6. doi:<a href=\"https://doi.org/10.1016/j.jajp.2022.100133\">10.1016/j.jajp.2022.100133</a>","bibtex":"@article{Schramm_Martin_Steinfelder_Bielak_Brosius_Meschut_Tröster_Wallmersperger_Mergheim_2022, title={A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase}, volume={6}, DOI={<a href=\"https://doi.org/10.1016/j.jajp.2022.100133\">10.1016/j.jajp.2022.100133</a>}, number={100133}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Schramm, Britta and Martin, Sven and Steinfelder, Christian and Bielak, Christian Roman and Brosius, Alexander and Meschut, Gerson and Tröster, Thomas and Wallmersperger, Thomas and Mergheim, Julia}, year={2022} }","apa":"Schramm, B., Martin, S., Steinfelder, C., Bielak, C. R., Brosius, A., Meschut, G., Tröster, T., Wallmersperger, T., &#38; Mergheim, J. (2022). A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase. <i>Journal of Advanced Joining Processes</i>, <i>6</i>, Article 100133. <a href=\"https://doi.org/10.1016/j.jajp.2022.100133\">https://doi.org/10.1016/j.jajp.2022.100133</a>","ieee":"B. Schramm <i>et al.</i>, “A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase,” <i>Journal of Advanced Joining Processes</i>, vol. 6, Art. no. 100133, 2022, doi: <a href=\"https://doi.org/10.1016/j.jajp.2022.100133\">10.1016/j.jajp.2022.100133</a>.","chicago":"Schramm, Britta, Sven Martin, Christian Steinfelder, Christian Roman Bielak, Alexander Brosius, Gerson Meschut, Thomas Tröster, Thomas Wallmersperger, and Julia Mergheim. “A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase.” <i>Journal of Advanced Joining Processes</i> 6 (2022). <a href=\"https://doi.org/10.1016/j.jajp.2022.100133\">https://doi.org/10.1016/j.jajp.2022.100133</a>.","short":"B. Schramm, S. Martin, C. Steinfelder, C.R. Bielak, A. Brosius, G. Meschut, T. Tröster, T. Wallmersperger, J. Mergheim, Journal of Advanced Joining Processes 6 (2022)."},"quality_controlled":"1","project":[{"_id":"130","name":"TRR 285: TRR 285"},{"name":"TRR 285 – B04: TRR 285 - Subproject B04","_id":"143"},{"name":"TRR 285 – B01: TRR 285 - Subproject B01","_id":"140"},{"_id":"135","name":"TRR 285 – A01: TRR 285 - Subproject A01"},{"_id":"142","name":"TRR 285 – B03: TRR 285 - Subproject B03"},{"name":"TRR 285 – A05: TRR 285 - Subproject A05","_id":"139"},{"name":"TRR 285 - Project Area B","_id":"132"},{"_id":"131","name":"TRR 285 - Project Area A"}],"_id":"34069","publisher":"Elsevier BV","user_id":"7850","volume":6,"status":"public"},{"citation":{"bibtex":"@article{Schramm_Friedlein_Gröger_Bielak_Bobbert_Gude_Meschut_Wallmersperger_Mergheim_2022, title={A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process}, DOI={<a href=\"https://doi.org/10.1016/j.jajp.2022.100134\">10.1016/j.jajp.2022.100134</a>}, number={100134}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Schramm, Britta and Friedlein, Johannes and Gröger, Benjamin and Bielak, Christian Roman and Bobbert, Mathias and Gude, Maik and Meschut, Gerson and Wallmersperger, Thomas and Mergheim, Julia}, year={2022} }","ama":"Schramm B, Friedlein J, Gröger B, et al. A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process. <i>Journal of Advanced Joining Processes</i>. Published online 2022. doi:<a href=\"https://doi.org/10.1016/j.jajp.2022.100134\">10.1016/j.jajp.2022.100134</a>","mla":"Schramm, Britta, et al. “A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process.” <i>Journal of Advanced Joining Processes</i>, 100134, Elsevier BV, 2022, doi:<a href=\"https://doi.org/10.1016/j.jajp.2022.100134\">10.1016/j.jajp.2022.100134</a>.","short":"B. Schramm, J. Friedlein, B. Gröger, C.R. Bielak, M. Bobbert, M. Gude, G. Meschut, T. Wallmersperger, J. Mergheim, Journal of Advanced Joining Processes (2022).","chicago":"Schramm, Britta, Johannes Friedlein, Benjamin Gröger, Christian Roman Bielak, Mathias Bobbert, Maik Gude, Gerson Meschut, Thomas Wallmersperger, and Julia Mergheim. “A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process.” <i>Journal of Advanced Joining Processes</i>, 2022. <a href=\"https://doi.org/10.1016/j.jajp.2022.100134\">https://doi.org/10.1016/j.jajp.2022.100134</a>.","ieee":"B. Schramm <i>et al.</i>, “A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process,” <i>Journal of Advanced Joining Processes</i>, Art. no. 100134, 2022, doi: <a href=\"https://doi.org/10.1016/j.jajp.2022.100134\">10.1016/j.jajp.2022.100134</a>.","apa":"Schramm, B., Friedlein, J., Gröger, B., Bielak, C. R., Bobbert, M., Gude, M., Meschut, G., Wallmersperger, T., &#38; Mergheim, J. (2022). A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process. <i>Journal of Advanced Joining Processes</i>, Article 100134. <a href=\"https://doi.org/10.1016/j.jajp.2022.100134\">https://doi.org/10.1016/j.jajp.2022.100134</a>"},"project":[{"_id":"130","name":"TRR 285: TRR 285"},{"name":"TRR 285 – B04: TRR 285 - Subproject B04","_id":"143"},{"_id":"139","name":"TRR 285 – A05: TRR 285 - Subproject A05"},{"name":"TRR 285 – A03: TRR 285 - Subproject A03","_id":"137"},{"_id":"135","name":"TRR 285 – A01: TRR 285 - Subproject A01"},{"name":"TRR 285 – B03: TRR 285 - Subproject B03","_id":"142"},{"_id":"131","name":"TRR 285 - Project Area A"},{"name":"TRR 285 - Project Area B","_id":"132"}],"quality_controlled":"1","_id":"34068","publisher":"Elsevier BV","user_id":"7850","status":"public","date_created":"2022-11-14T08:53:07Z","department":[{"_id":"143"},{"_id":"157"}],"type":"journal_article","keyword":["Mechanical Engineering","Mechanics of Materials","Engineering (miscellaneous)","Chemical Engineering (miscellaneous)"],"publication":"Journal of Advanced Joining Processes","language":[{"iso":"eng"}],"article_number":"100134","doi":"10.1016/j.jajp.2022.100134","publication_identifier":{"issn":["2666-3309"]},"author":[{"full_name":"Schramm, Britta","first_name":"Britta","last_name":"Schramm","id":"4668"},{"full_name":"Friedlein, Johannes","first_name":"Johannes","last_name":"Friedlein"},{"full_name":"Gröger, Benjamin","first_name":"Benjamin","last_name":"Gröger"},{"full_name":"Bielak, Christian Roman","first_name":"Christian Roman","last_name":"Bielak","id":"34782"},{"id":"7850","full_name":"Bobbert, Mathias","first_name":"Mathias","last_name":"Bobbert"},{"first_name":"Maik","last_name":"Gude","full_name":"Gude, Maik"},{"id":"32056","last_name":"Meschut","orcid":"0000-0002-2763-1246","first_name":"Gerson","full_name":"Meschut, Gerson"},{"last_name":"Wallmersperger","first_name":"Thomas","full_name":"Wallmersperger, Thomas"},{"full_name":"Mergheim, Julia","first_name":"Julia","last_name":"Mergheim"}],"year":"2022","title":"A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process","publication_status":"published","date_updated":"2026-05-12T12:58:23Z"},{"date_created":"2022-11-14T08:55:34Z","department":[{"_id":"143"}],"type":"journal_article","keyword":["Mechanical Engineering","Mechanics of Materials","Engineering (miscellaneous)","Chemical Engineering (miscellaneous)"],"publication":"Journal of Advanced Joining Processes","language":[{"iso":"eng"}],"article_number":"100135","doi":"10.1016/j.jajp.2022.100135","publication_identifier":{"issn":["2666-3309"]},"author":[{"id":"4668","full_name":"Schramm, Britta","first_name":"Britta","last_name":"Schramm"},{"full_name":"Harzheim, Sven","last_name":"Harzheim","first_name":"Sven"},{"full_name":"Weiß, Deborah","first_name":"Deborah","last_name":"Weiß","id":"45673"},{"id":"30821","full_name":"Joy, Tintu David","last_name":"Joy","first_name":"Tintu David"},{"full_name":"Hofmann, Martin","first_name":"Martin","last_name":"Hofmann"},{"first_name":"Julia","last_name":"Mergheim","full_name":"Mergheim, Julia"},{"full_name":"Wallmersperger, Thomas","first_name":"Thomas","last_name":"Wallmersperger"}],"year":"2022","title":"A Review on the Modeling of the Clinching Process Chain - Part III: Operational Phase","publication_status":"published","date_updated":"2026-05-12T12:52:34Z","citation":{"apa":"Schramm, B., Harzheim, S., Weiß, D., Joy, T. D., Hofmann, M., Mergheim, J., &#38; Wallmersperger, T. (2022). A Review on the Modeling of the Clinching Process Chain - Part III: Operational Phase. <i>Journal of Advanced Joining Processes</i>, Article 100135. <a href=\"https://doi.org/10.1016/j.jajp.2022.100135\">https://doi.org/10.1016/j.jajp.2022.100135</a>","ieee":"B. Schramm <i>et al.</i>, “A Review on the Modeling of the Clinching Process Chain - Part III: Operational Phase,” <i>Journal of Advanced Joining Processes</i>, Art. no. 100135, 2022, doi: <a href=\"https://doi.org/10.1016/j.jajp.2022.100135\">10.1016/j.jajp.2022.100135</a>.","chicago":"Schramm, Britta, Sven Harzheim, Deborah Weiß, Tintu David Joy, Martin Hofmann, Julia Mergheim, and Thomas Wallmersperger. “A Review on the Modeling of the Clinching Process Chain - Part III: Operational Phase.” <i>Journal of Advanced Joining Processes</i>, 2022. <a href=\"https://doi.org/10.1016/j.jajp.2022.100135\">https://doi.org/10.1016/j.jajp.2022.100135</a>.","short":"B. Schramm, S. Harzheim, D. Weiß, T.D. Joy, M. Hofmann, J. Mergheim, T. Wallmersperger, Journal of Advanced Joining Processes (2022).","mla":"Schramm, Britta, et al. “A Review on the Modeling of the Clinching Process Chain - Part III: Operational Phase.” <i>Journal of Advanced Joining Processes</i>, 100135, Elsevier BV, 2022, doi:<a href=\"https://doi.org/10.1016/j.jajp.2022.100135\">10.1016/j.jajp.2022.100135</a>.","ama":"Schramm B, Harzheim S, Weiß D, et al. A Review on the Modeling of the Clinching Process Chain - Part III: Operational Phase. <i>Journal of Advanced Joining Processes</i>. Published online 2022. doi:<a href=\"https://doi.org/10.1016/j.jajp.2022.100135\">10.1016/j.jajp.2022.100135</a>","bibtex":"@article{Schramm_Harzheim_Weiß_Joy_Hofmann_Mergheim_Wallmersperger_2022, title={A Review on the Modeling of the Clinching Process Chain - Part III: Operational Phase}, DOI={<a href=\"https://doi.org/10.1016/j.jajp.2022.100135\">10.1016/j.jajp.2022.100135</a>}, number={100135}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Schramm, Britta and Harzheim, Sven and Weiß, Deborah and Joy, Tintu David and Hofmann, Martin and Mergheim, Julia and Wallmersperger, Thomas}, year={2022} }"},"project":[{"name":"TRR 285: TRR 285","_id":"130"},{"_id":"143","name":"TRR 285 – B04: TRR 285 - Subproject B04"},{"name":"TRR 285 – B03: TRR 285 - Subproject B03","_id":"142"},{"_id":"139","name":"TRR 285 – A05: TRR 285 - Subproject A05"},{"name":"TRR 285 - Project Area B","_id":"132"},{"name":"TRR 285 - Project Area A","_id":"131"}],"quality_controlled":"1","_id":"34070","publisher":"Elsevier BV","user_id":"7850","status":"public"},{"author":[{"id":"291","first_name":"Gunter","last_name":"Kullmer","full_name":"Kullmer, Gunter"},{"id":"45673","full_name":"Weiß, Deborah","first_name":"Deborah","last_name":"Weiß"},{"id":"4668","first_name":"Britta","last_name":"Schramm","full_name":"Schramm, Britta"}],"conference":{"location":"Bremen","start_date":"2020-02-18","name":"Arbeitskreis: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen","end_date":"2020-02-19"},"title":"Entwicklung einer Methode zur differenzierten Messung des Wachstums der Rissenden von Innenrissen mit der Elektropotentialmethode","year":"2021","status":"public","date_updated":"2023-02-07T09:37:23Z","_id":"34472","language":[{"iso":"ger"}],"page":"107-116","volume":"DVM-Bericht 253","user_id":"4668","doi":"10.48447/BR-2021-013","citation":{"apa":"Kullmer, G., Weiß, D., &#38; Schramm, B. (2021). <i>Entwicklung einer Methode zur differenzierten Messung des Wachstums der Rissenden von Innenrissen mit der Elektropotentialmethode</i>. <i>DVM-Bericht 253</i>, 107–116. <a href=\"https://doi.org/10.48447/BR-2021-013\">https://doi.org/10.48447/BR-2021-013</a>","mla":"Kullmer, Gunter, et al. <i>Entwicklung einer Methode zur differenzierten Messung des Wachstums der Rissenden von Innenrissen mit der Elektropotentialmethode</i>. 2021, pp. 107–16, doi:<a href=\"https://doi.org/10.48447/BR-2021-013\">10.48447/BR-2021-013</a>.","ieee":"G. Kullmer, D. Weiß, and B. Schramm, “Entwicklung einer Methode zur differenzierten Messung des Wachstums der Rissenden von Innenrissen mit der Elektropotentialmethode,” Bremen, 2021, vol. DVM-Bericht 253, pp. 107–116, doi: <a href=\"https://doi.org/10.48447/BR-2021-013\">10.48447/BR-2021-013</a>.","ama":"Kullmer G, Weiß D, Schramm B. Entwicklung einer Methode zur differenzierten Messung des Wachstums der Rissenden von Innenrissen mit der Elektropotentialmethode. In: Vol DVM-Bericht 253. ; 2021:107-116. doi:<a href=\"https://doi.org/10.48447/BR-2021-013\">10.48447/BR-2021-013</a>","short":"G. Kullmer, D. Weiß, B. Schramm, in: 2021, pp. 107–116.","chicago":"Kullmer, Gunter, Deborah Weiß, and Britta Schramm. “Entwicklung einer Methode zur differenzierten Messung des Wachstums der Rissenden von Innenrissen mit der Elektropotentialmethode,” DVM-Bericht 253:107–16, 2021. <a href=\"https://doi.org/10.48447/BR-2021-013\">https://doi.org/10.48447/BR-2021-013</a>.","bibtex":"@inproceedings{Kullmer_Weiß_Schramm_2021, title={Entwicklung einer Methode zur differenzierten Messung des Wachstums der Rissenden von Innenrissen mit der Elektropotentialmethode}, volume={DVM-Bericht 253}, DOI={<a href=\"https://doi.org/10.48447/BR-2021-013\">10.48447/BR-2021-013</a>}, author={Kullmer, Gunter and Weiß, Deborah and Schramm, Britta}, year={2021}, pages={107–116} }"},"project":[{"grant_number":"418701707","_id":"130","name":"TRR 285: TRR 285"},{"_id":"132","name":"TRR 285 - B: TRR 285 - Project Area B"},{"name":"TRR 285 – B04: TRR 285 - Subproject B04","_id":"143"}],"date_created":"2022-12-16T15:09:10Z","department":[{"_id":"143"},{"_id":"630"}],"type":"conference"},{"type":"conference","department":[{"_id":"143"}],"date_created":"2023-02-08T08:50:44Z","citation":{"bibtex":"@inproceedings{Duffe_Schramm_Kullmer_2021, title={Experimentelle Ermittlung von Rissfortschrittskurven für hyperelastische Klebstoffe}, volume={DVM-Bericht 253}, DOI={<a href=\"https://doi.org/10.48447/BR-2021-018\">10.48447/BR-2021-018</a>}, publisher={Deutscher Verband für Materialforschung und –prüfung e.V.}, author={Duffe, Tobias and Schramm, Britta and Kullmer, Gunter}, year={2021}, pages={157–166} }","ama":"Duffe T, Schramm B, Kullmer G. Experimentelle Ermittlung von Rissfortschrittskurven für hyperelastische Klebstoffe. In: Vol DVM-Bericht 253. Deutscher Verband für Materialforschung und –prüfung e.V.; 2021:157-166. doi:<a href=\"https://doi.org/10.48447/BR-2021-018\">10.48447/BR-2021-018</a>","mla":"Duffe, Tobias, et al. <i>Experimentelle Ermittlung von Rissfortschrittskurven für hyperelastische Klebstoffe</i>. Deutscher Verband für Materialforschung und –prüfung e.V., 2021, pp. 157–66, doi:<a href=\"https://doi.org/10.48447/BR-2021-018\">10.48447/BR-2021-018</a>.","chicago":"Duffe, Tobias, Britta Schramm, and Gunter Kullmer. “Experimentelle Ermittlung von Rissfortschrittskurven für hyperelastische Klebstoffe,” DVM-Bericht 253:157–66. Deutscher Verband für Materialforschung und –prüfung e.V., 2021. <a href=\"https://doi.org/10.48447/BR-2021-018\">https://doi.org/10.48447/BR-2021-018</a>.","short":"T. Duffe, B. Schramm, G. Kullmer, in: Deutscher Verband für Materialforschung und –prüfung e.V., 2021, pp. 157–166.","ieee":"T. Duffe, B. Schramm, and G. Kullmer, “Experimentelle Ermittlung von Rissfortschrittskurven für hyperelastische Klebstoffe,” 2021, vol. DVM-Bericht 253, pp. 157–166, doi: <a href=\"https://doi.org/10.48447/BR-2021-018\">10.48447/BR-2021-018</a>.","apa":"Duffe, T., Schramm, B., &#38; Kullmer, G. (2021). <i>Experimentelle Ermittlung von Rissfortschrittskurven für hyperelastische Klebstoffe</i>. <i>DVM-Bericht 253</i>, 157–166. <a href=\"https://doi.org/10.48447/BR-2021-018\">https://doi.org/10.48447/BR-2021-018</a>"},"user_id":"41322","doi":"10.48447/BR-2021-018","volume":"DVM-Bericht 253","page":"157-166","_id":"41910","publisher":"Deutscher Verband für Materialforschung und –prüfung e.V.","language":[{"iso":"ger"}],"date_updated":"2023-02-08T08:59:52Z","title":"Experimentelle Ermittlung von Rissfortschrittskurven für hyperelastische Klebstoffe","year":"2021","status":"public","author":[{"id":"41322","full_name":"Duffe, Tobias","last_name":"Duffe","first_name":"Tobias"},{"full_name":"Schramm, Britta","first_name":"Britta","last_name":"Schramm","id":"4668"},{"first_name":"Gunter","last_name":"Kullmer","full_name":"Kullmer, Gunter","id":"291"}]},{"publication":"Key Engineering Materials","abstract":[{"lang":"eng","text":"<jats:p>In many areas of product manufacturing constructions consist of individual components and metal sheets that are joined together to form complex structures. A simple and industrial common method for joining dissimilar and coated materials is clinching. During the joining process and due to the service load cracks can occur in the area of the joint, propagate due to cyclic loading and consequently lead to structural failure. For the prevention of these damage cases, first of all knowledge about the fracture mechanical material parameters regarding the original material state of the sheet metals used within the clinching process are essential.Within the scope of this paper experimental and numerical preliminary investigations regarding the fracture mechanical behavior of sheet metals used within the clinching process are presented. Due to the low thickness of 1.5 mm of the material sheets, the development of a new specimen is necessary to determine the crack growth rate curve including the fracture mechanical parameters like the threshold against crack growth ΔK<jats:sub>I,th</jats:sub> and the fracture toughness K<jats:sub>IC</jats:sub> of the base material HCT590X. For the experimental determination of the crack growth rate curve the numerical calculation of the geometry factor function as well as the calibration function of this special specimen are essential. After the experimental validation of the numerically determined calibration function, crack growth rate curves are determined for the stress ratios <jats:italic>R</jats:italic> = 0.1 and <jats:italic>R</jats:italic> = 0.3 to examine the mean stress sensitivity. In addition, the different rolling directions of 0° and 90° in relation to the initial crack are taken into account in order to investigate the influence of the anisotropy due to rolling.</jats:p>"}],"date_created":"2022-03-29T08:09:01Z","keyword":["Mechanical Engineering","Mechanics of Materials","General Materials Science"],"type":"conference","department":[{"_id":"143"}],"year":"2021","title":"Numerical and Experimental Fracture Mechanical Investigations of Clinchable Sheet Metals Made of HCT590X","author":[{"full_name":"Weiß, Deborah","first_name":"Deborah","last_name":"Weiß","id":"45673"},{"id":"4668","first_name":"Britta","last_name":"Schramm","full_name":"Schramm, Britta"},{"id":"291","full_name":"Kullmer, Gunter","last_name":"Kullmer","first_name":"Gunter"}],"publication_identifier":{"issn":["1662-9795"]},"publication_status":"published","date_updated":"2023-04-27T10:13:19Z","intvolume":"       883","language":[{"iso":"eng"}],"doi":"10.4028/www.scientific.net/kem.883.127","citation":{"chicago":"Weiß, Deborah, Britta Schramm, and Gunter Kullmer. “Numerical and Experimental Fracture Mechanical Investigations of Clinchable Sheet Metals Made of HCT590X.” In <i>Key Engineering Materials</i>, 883:127–32. Trans Tech Publications, Ltd., 2021. <a href=\"https://doi.org/10.4028/www.scientific.net/kem.883.127\">https://doi.org/10.4028/www.scientific.net/kem.883.127</a>.","short":"D. Weiß, B. Schramm, G. Kullmer, in: Key Engineering Materials, Trans Tech Publications, Ltd., 2021, pp. 127–132.","apa":"Weiß, D., Schramm, B., &#38; Kullmer, G. (2021). Numerical and Experimental Fracture Mechanical Investigations of Clinchable Sheet Metals Made of HCT590X. <i>Key Engineering Materials</i>, <i>883</i>, 127–132. <a href=\"https://doi.org/10.4028/www.scientific.net/kem.883.127\">https://doi.org/10.4028/www.scientific.net/kem.883.127</a>","ieee":"D. Weiß, B. Schramm, and G. Kullmer, “Numerical and Experimental Fracture Mechanical Investigations of Clinchable Sheet Metals Made of HCT590X,” in <i>Key Engineering Materials</i>, online, 2021, vol. 883, pp. 127–132, doi: <a href=\"https://doi.org/10.4028/www.scientific.net/kem.883.127\">10.4028/www.scientific.net/kem.883.127</a>.","ama":"Weiß D, Schramm B, Kullmer G. Numerical and Experimental Fracture Mechanical Investigations of Clinchable Sheet Metals Made of HCT590X. In: <i>Key Engineering Materials</i>. Vol 883. Trans Tech Publications, Ltd.; 2021:127-132. doi:<a href=\"https://doi.org/10.4028/www.scientific.net/kem.883.127\">10.4028/www.scientific.net/kem.883.127</a>","bibtex":"@inproceedings{Weiß_Schramm_Kullmer_2021, title={Numerical and Experimental Fracture Mechanical Investigations of Clinchable Sheet Metals Made of HCT590X}, volume={883}, DOI={<a href=\"https://doi.org/10.4028/www.scientific.net/kem.883.127\">10.4028/www.scientific.net/kem.883.127</a>}, booktitle={Key Engineering Materials}, publisher={Trans Tech Publications, Ltd.}, author={Weiß, Deborah and Schramm, Britta and Kullmer, Gunter}, year={2021}, pages={127–132} }","mla":"Weiß, Deborah, et al. “Numerical and Experimental Fracture Mechanical Investigations of Clinchable Sheet Metals Made of HCT590X.” <i>Key Engineering Materials</i>, vol. 883, Trans Tech Publications, Ltd., 2021, pp. 127–32, doi:<a href=\"https://doi.org/10.4028/www.scientific.net/kem.883.127\">10.4028/www.scientific.net/kem.883.127</a>."},"quality_controlled":"1","status":"public","conference":{"end_date":"2021-03-31","location":"online","start_date":"2021-03-29","name":"19th International Conference on Sheet Metal"},"page":"127-132","publisher":"Trans Tech Publications, Ltd.","_id":"30675","user_id":"45673","volume":883},{"year":"2021","title":"Holistic investigation chain for the experimental determination of fracture mechanical material parameters with special specimens","status":"public","publication_identifier":{"issn":["0944-6524","1863-7353"]},"author":[{"last_name":"Weiß","first_name":"Deborah","full_name":"Weiß, Deborah","id":"45673"},{"full_name":"Schramm, Britta","last_name":"Schramm","first_name":"Britta","id":"4668"},{"id":"291","full_name":"Kullmer, Gunter","last_name":"Kullmer","first_name":"Gunter"}],"publication_status":"published","date_updated":"2023-04-27T10:14:53Z","language":[{"iso":"eng"}],"_id":"30674","publisher":"Springer Science and Business Media LLC","user_id":"45673","doi":"10.1007/s11740-021-01096-6","publication":"Production Engineering","citation":{"chicago":"Weiß, Deborah, Britta Schramm, and Gunter Kullmer. “Holistic Investigation Chain for the Experimental Determination of Fracture Mechanical Material Parameters with Special Specimens.” <i>Production Engineering</i>, 2021. <a href=\"https://doi.org/10.1007/s11740-021-01096-6\">https://doi.org/10.1007/s11740-021-01096-6</a>.","short":"D. Weiß, B. Schramm, G. Kullmer, Production Engineering (2021).","ieee":"D. Weiß, B. Schramm, and G. Kullmer, “Holistic investigation chain for the experimental determination of fracture mechanical material parameters with special specimens,” <i>Production Engineering</i>, 2021, doi: <a href=\"https://doi.org/10.1007/s11740-021-01096-6\">10.1007/s11740-021-01096-6</a>.","apa":"Weiß, D., Schramm, B., &#38; Kullmer, G. (2021). Holistic investigation chain for the experimental determination of fracture mechanical material parameters with special specimens. <i>Production Engineering</i>. <a href=\"https://doi.org/10.1007/s11740-021-01096-6\">https://doi.org/10.1007/s11740-021-01096-6</a>","bibtex":"@article{Weiß_Schramm_Kullmer_2021, title={Holistic investigation chain for the experimental determination of fracture mechanical material parameters with special specimens}, DOI={<a href=\"https://doi.org/10.1007/s11740-021-01096-6\">10.1007/s11740-021-01096-6</a>}, journal={Production Engineering}, publisher={Springer Science and Business Media LLC}, author={Weiß, Deborah and Schramm, Britta and Kullmer, Gunter}, year={2021} }","ama":"Weiß D, Schramm B, Kullmer G. Holistic investigation chain for the experimental determination of fracture mechanical material parameters with special specimens. <i>Production Engineering</i>. Published online 2021. doi:<a href=\"https://doi.org/10.1007/s11740-021-01096-6\">10.1007/s11740-021-01096-6</a>","mla":"Weiß, Deborah, et al. “Holistic Investigation Chain for the Experimental Determination of Fracture Mechanical Material Parameters with Special Specimens.” <i>Production Engineering</i>, Springer Science and Business Media LLC, 2021, doi:<a href=\"https://doi.org/10.1007/s11740-021-01096-6\">10.1007/s11740-021-01096-6</a>."},"quality_controlled":"1","abstract":[{"lang":"eng","text":"<jats:title>Abstract</jats:title><jats:p>In addition to the classical strength calculation, it is important to design components with regard to fracture mechanics because defects and cracks in a component can drastically influence its strength or fatigue behavior. Cracks can propagate due to operational loads and consequently lead to component failure. The fracture mechanical analysis provides information on stable or unstable crack growth as well as about the direction and the growth rate of a crack. For this purpose, sufficient information has to be available about the crack location, the crack length, the component geometry, the component loading and the fracture mechanical material parameters. The fracture mechanical properties are determined experimentally with standardized specimens as defined by the guidelines of the American Society for Testing and Materials. In practice, however, especially in the context with damage cases or formed material fracture mechanical parameters directly for a component are of interest. However, standard specimens often cannot be extracted at all due to the complexity of the component geometry. Therefore, the development of special specimens is required whereby certain arrangements have to be made in advance. These arrangements are presented in the present paper in order to contribute to a holistic investigation chain for the experimental determination of fracture mechanical material parameters with special specimens.</jats:p>"}],"date_created":"2022-03-29T08:05:02Z","keyword":["Industrial and Manufacturing Engineering","Mechanical Engineering"],"type":"journal_article","department":[{"_id":"143"}]}]