@article{43371,
  abstract     = {{Laser structuring to improve the adhesion properties of steel substrates in fiber-metal laminates offers many advantages that are highly suitable for modern industrial requirements. Maintenance and energy costs are relatively low, it is easy to automate, and there are no by-products such as chemicals or abrasives to dispose of or recycle. This makes laser structuring a particularly environmentally friendly process, which is nowadays more important than ever. On the other hand, the process time for laser structuring is much higher than for chemical pre-treatment, for example. In past studies, the time and cost efficiency of the laser structuring process has tended to play a minor role. However, there are approaches in which laser structured surfaces are adapted to the shear stress peaks occurring within the adhesive layer, thus requiring only partial structuring of the area to be bonded, potentially saving process time. In this experimental study, electrolytically galvanized steel substrates were partially laser structured to match the shear stress distribution and then bonded to a carbon fiber-reinforced plastic. The adhesion properties achieved were characterized using shear tensile tests and compared with the properties of the fully structured ones. With the partial laser structuring, a saving of 66 % of the conventional process time was achieved while maintaining 95 % of the same shear strength.}},
  author       = {{Voswinkel, Dietrich}},
  journal      = {{Journal of Manufacturing Processes}},
  keywords     = {{Laser treatment Adhesive bonding Surface technology Hybrid materials}},
  pages        = {{10--19}},
  publisher    = {{Elsevier}},
  title        = {{{Application of a new strategy for time-efficient laser treatment of galvanized steel substrates to improve the adhesion properties}}},
  doi          = {{/10.1016/j.jmapro.2023.03.056}},
  volume       = {{94}},
  year         = {{2023}},
}

@article{34097,
  author       = {{Voswinkel, Dietrich and Striewe, Jan Andre and Grydin, Olexandr and Meinderink, Dennis and Grundmeier, Guido and Schaper, Mirko and Tröster, Thomas}},
  issn         = {{0924-3046}},
  journal      = {{Advanced Composite Materials}},
  keywords     = {{Mechanical Engineering, Mechanics of Materials, Ceramics and Composites}},
  pages        = {{1--16}},
  publisher    = {{Informa UK Limited}},
  title        = {{{Co-bonding of carbon fibre-reinforced epoxy and galvanised steel with laser structured interface for automotive applications}}},
  doi          = {{10.1080/09243046.2022.2143746}},
  year         = {{2022}},
}

@article{34652,
  author       = {{Vieth, P. and Garthe, M.-A. and Voswinkel, Dietrich and Schaper, Mirko and Grundmeier, Guido}},
  issn         = {{0257-8972}},
  journal      = {{Surface and Coatings Technology}},
  keywords     = {{Materials Chemistry, Surfaces, Coatings and Films, Surfaces and Interfaces, Condensed Matter Physics, General Chemistry}},
  publisher    = {{Elsevier BV}},
  title        = {{{Enhancement of the delamination resistance of adhesive film coated surface laser melted aluminum 7075-T6 alloy by aminophosphonic acid adsorption}}},
  doi          = {{10.1016/j.surfcoat.2022.128835}},
  volume       = {{447}},
  year         = {{2022}},
}

@article{26173,
  author       = {{Voswinkel, Dietrich}},
  journal      = {{ IOP Conference Series: Materials Science and Engineering}},
  title        = {{{Improving the Accuracy of Deep Drawn Fiber-Metal Laminate Parts by Preliminary Surface Treatment}}},
  doi          = {{10.1088/1757-899X/1190/1/012028}},
  volume       = {{1190}},
  year         = {{2021}},
}

@article{26191,
  author       = {{Voswinkel, Dietrich and Sapli, Hüseyin and Kloidt, Dennis and Heggemann, Thomas and Homberg, Werner and Grydin, Olexandr and Schaper, Mirko}},
  issn         = {{1757-8981}},
  journal      = {{IOP Conference Series: Materials Science and Engineering}},
  title        = {{{Improving the Accuracy of Deep Drawn Fiber-Metal Laminate Parts by Preliminary Surface Treatment}}},
  doi          = {{10.1088/1757-899x/1190/1/012028}},
  year         = {{2021}},
}

@article{24565,
  abstract     = {{<jats:title>Abstract</jats:title><jats:p>Laser surface treatment of metals is one option to improve their properties for adhesive bonding. In this paper, a pulsed YVO4 Laser source with a wavelength of 1064 nm and a maximum power of 25 W was utilized to increase the surface area of the steel HCT490X in order to improve its bonding properties with a carbon fibre reinforced polymer (CFRP). Investigated was the influence of the scanning speed of the laser source on the bonding properties. For this purpose, the steel surfaces were ablated at a scanning speed between 1500 and 4500 mm/s. Afterwards the components were bonded with the adhesive HexBond™ 677. After lap shear tests were carried out on the specimen, the surfaces were inspected using scanning electron microscopy (SEM). The experiments revealed that the bonding quality can be improved with a high scanning speed, even when the surface is not completely ablated.</jats:p>}},
  author       = {{Voswinkel, Dietrich and Kloidt, D. and Grydin, Olexandr and Schaper, Mirko}},
  issn         = {{0944-6524}},
  journal      = {{Production Engineering}},
  number       = {{2}},
  pages        = {{263--270}},
  title        = {{{Time efficient laser modification of steel surfaces for advanced bonding in hybrid materials}}},
  doi          = {{10.1007/s11740-020-01006-2}},
  volume       = {{15}},
  year         = {{2021}},
}

@article{24566,
  author       = {{Engelkemeier, Katja and Sun, Aijia and Voswinkel, Dietrich and Grydin, Olexandr and Schaper, Mirko and Bremser, Wolfgang}},
  issn         = {{2196-0216}},
  journal      = {{ChemElectroChem}},
  pages        = {{2155--2168}},
  publisher    = {{Wiley}},
  title        = {{{Zinc Anodizing: Structural Diversity of Anodic Zinc Oxide Controlled by the Type of Electrolyte}}},
  doi          = {{10.1002/celc.202100216}},
  year         = {{2021}},
}

@article{24570,
  author       = {{Frolov, Yaroslav and Haranich, Yurii and Bobukh, Olexandr and Remez, Oleg and Voswinkel, Dietrich and Grydin, Olexandr}},
  issn         = {{1526-6125}},
  journal      = {{Journal of Manufacturing Processes}},
  pages        = {{857--867}},
  title        = {{{Deformation of expanded steel mesh inlay inside aluminum matrix during the roll bonding}}},
  doi          = {{10.1016/j.jmapro.2020.08.049}},
  volume       = {{58}},
  year         = {{2020}},
}