---
_id: '43464'
abstract:
- lang: eng
text: Lightweight design is a common approach to reduce energy demand in
the use stage of vehicles. The production of lightweight materials is usually
associated with an increase in energy demand, so the environmental impacts of
lightweight structures need to be assessed holistically using a life cycle assessment.
To estimate the life cycle environmental impacts of a product in its developmental
stage, for example, by life cycle engineering, future changes in relevant influencing
factors must be considered. Prospective life cycle assessment provides methods
for integrating future scenarios into life cycle assessment studies. However,
approaches for integrating prospective life cycle assessment into product development
are limited. The objective of this work is to provide the methodological foundation
for integrating future scenarios of relevant influencing factors in the development
of lightweight structures. The applicability of the novel methodology is demonstrated
by a case study of a structural component in a steel, aluminium, and hybrid design.
The results show that appropriate decarbonisation measures can reduce the life
cycle greenhouse gas emissions by up to 95 percent until 2050. We also found that
shifts in the environmentally optimal design are possible in future scenarios.
Therefore, the methodology and data provided contribute to improved decision-making
in product development.
article_number: '3371'
author:
- first_name: Moritz
full_name: Ostermann, Moritz
id: '44763'
last_name: Ostermann
orcid: https://orcid.org/0000-0003-1146-0443
- first_name: Julian
full_name: Grenz, Julian
last_name: Grenz
- first_name: Marcel
full_name: Triebus, Marcel
id: '66036'
last_name: Triebus
- first_name: Felipe
full_name: Cerdas, Felipe
last_name: Cerdas
- first_name: Thorsten
full_name: Marten, Thorsten
id: '338'
last_name: Marten
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Christoph
full_name: Herrmann, Christoph
last_name: Herrmann
citation:
ama: 'Ostermann M, Grenz J, Triebus M, et al. Integrating Prospective Scenarios
in Life Cycle Engineering: Case Study of Lightweight Structures. Energies.
2023;16(8). doi:10.3390/en16083371'
apa: 'Ostermann, M., Grenz, J., Triebus, M., Cerdas, F., Marten, T., Tröster, T.,
& Herrmann, C. (2023). Integrating Prospective Scenarios in Life Cycle Engineering:
Case Study of Lightweight Structures. Energies, 16(8), Article 3371.
https://doi.org/10.3390/en16083371'
bibtex: '@article{Ostermann_Grenz_Triebus_Cerdas_Marten_Tröster_Herrmann_2023, title={Integrating
Prospective Scenarios in Life Cycle Engineering: Case Study of Lightweight Structures},
volume={16}, DOI={10.3390/en16083371},
number={83371}, journal={Energies}, publisher={MDPI AG}, author={Ostermann, Moritz
and Grenz, Julian and Triebus, Marcel and Cerdas, Felipe and Marten, Thorsten
and Tröster, Thomas and Herrmann, Christoph}, year={2023} }'
chicago: 'Ostermann, Moritz, Julian Grenz, Marcel Triebus, Felipe Cerdas, Thorsten
Marten, Thomas Tröster, and Christoph Herrmann. “Integrating Prospective Scenarios
in Life Cycle Engineering: Case Study of Lightweight Structures.” Energies
16, no. 8 (2023). https://doi.org/10.3390/en16083371.'
ieee: 'M. Ostermann et al., “Integrating Prospective Scenarios in Life Cycle
Engineering: Case Study of Lightweight Structures,” Energies, vol. 16,
no. 8, Art. no. 3371, 2023, doi: 10.3390/en16083371.'
mla: 'Ostermann, Moritz, et al. “Integrating Prospective Scenarios in Life Cycle
Engineering: Case Study of Lightweight Structures.” Energies, vol. 16,
no. 8, 3371, MDPI AG, 2023, doi:10.3390/en16083371.'
short: M. Ostermann, J. Grenz, M. Triebus, F. Cerdas, T. Marten, T. Tröster, C.
Herrmann, Energies 16 (2023).
date_created: 2023-04-13T09:11:33Z
date_updated: 2023-04-13T09:19:56Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.3390/en16083371
intvolume: ' 16'
issue: '8'
keyword:
- Life Cycle Engineering
- Life Cycle Assessment
- Lightweight Design
- Prospective LCA
- Future-oriented LCA
- Energy System
- Material production
- Sustainable production
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.mdpi.com/1996-1073/16/8/3371
oa: '1'
publication: Energies
publication_identifier:
issn:
- 1996-1073
publication_status: published
publisher: MDPI AG
quality_controlled: '1'
status: public
title: 'Integrating Prospective Scenarios in Life Cycle Engineering: Case Study of
Lightweight Structures'
type: journal_article
user_id: '44763'
volume: 16
year: '2023'
...
---
_id: '49155'
abstract:
- lang: ger
text: Hybride Bauteile, welche aus Werkstoffen mit hohen spezifischen Festigkeiten
bestehen, können zu einem signifikanten Leichtbau im Automobil beitragen. Diese
Arbeit erforscht die hybride Kombination von pressgehärtetem Stahl und kohlenstofffaserverstärktem
Kunststoff. Ausgehend von einer Analyse bestehender Karosseriestrukturen erfolgt
ein Konzept für eine hybride B-Säule. Das Potential zur Gewichtsreduzierung durch
das hybride Bauteilkonzept wurde dabei zu 57 % identifiziert, welches jedoch nur
bei Sicherstellung einer intakten Grenzfläche erreicht wird. Zur Erlangung der
Grenzflächenfestigkeit bei charakteristischen Belastungsprofilen wurde ein Verfahren
zur Einbringung makroskopischer Formschlusselemente im Presshärteprozess entwickelt.
Durch diese Formschlusselemente wird eine Steigerung der Scherfestigkeit der hybriden
Komponenten von über 300 % erreicht. Die gewonnenen Erkenntnisse werden abschließend
zur Auslegung einer hybriden B-Säule angewendet.
- lang: eng
text: Hybrid components consisting of materials with high specific strengths can
contribute to significant automotive lightweight design. This thesis investigates
the hybrid combination of press-hardened steel and carbon fiber-reinforced plastics.
Based on a potential analysis of existing body-in-white structures, a concept
for a hybrid B-pillar is developed. The potential for weight reduction through
the hybrid component concept was identified to be 57 %, which is only achieved
if an intact interface is ensured. To achieve interface strength under characteristic
load profiles, a method was developed for creating macroscopic form closures in
the press hardening process. These form closures achieve an increase in the shear
strength of the hybrid components of over 300 %. Finally, the knowledge gained
is applied to the design of a hybrid B-pillar.
author:
- first_name: Marcel
full_name: Triebus, Marcel
id: '66036'
last_name: Triebus
citation:
ama: Triebus M. Belastungsgerechte Auslegung Automobiler Leichtbaustrukturen
Aus Pressgehärtetem Stahl Und Kohlenstofffaserverstärktem Kunststoff.; 2023.
doi:10.17619/UNIPB/1-1719
apa: Triebus, M. (2023). Belastungsgerechte Auslegung automobiler Leichtbaustrukturen
aus pressgehärtetem Stahl und kohlenstofffaserverstärktem Kunststoff. https://doi.org/10.17619/UNIPB/1-1719
bibtex: '@book{Triebus_2023, title={Belastungsgerechte Auslegung automobiler Leichtbaustrukturen
aus pressgehärtetem Stahl und kohlenstofffaserverstärktem Kunststoff}, DOI={10.17619/UNIPB/1-1719}, author={Triebus,
Marcel}, year={2023} }'
chicago: Triebus, Marcel. Belastungsgerechte Auslegung Automobiler Leichtbaustrukturen
Aus Pressgehärtetem Stahl Und Kohlenstofffaserverstärktem Kunststoff, 2023.
https://doi.org/10.17619/UNIPB/1-1719.
ieee: M. Triebus, Belastungsgerechte Auslegung automobiler Leichtbaustrukturen
aus pressgehärtetem Stahl und kohlenstofffaserverstärktem Kunststoff. 2023.
mla: Triebus, Marcel. Belastungsgerechte Auslegung Automobiler Leichtbaustrukturen
Aus Pressgehärtetem Stahl Und Kohlenstofffaserverstärktem Kunststoff. 2023,
doi:10.17619/UNIPB/1-1719.
short: M. Triebus, Belastungsgerechte Auslegung Automobiler Leichtbaustrukturen
Aus Pressgehärtetem Stahl Und Kohlenstofffaserverstärktem Kunststoff, 2023.
date_created: 2023-11-23T11:35:44Z
date_updated: 2023-11-23T11:50:35Z
department:
- _id: '321'
- _id: '9'
- _id: '149'
doi: 10.17619/UNIPB/1-1719
language:
- iso: eng
status: public
title: Belastungsgerechte Auslegung automobiler Leichtbaustrukturen aus pressgehärtetem
Stahl und kohlenstofffaserverstärktem Kunststoff
type: dissertation
user_id: '66036'
year: '2023'
...
---
_id: '32871'
author:
- first_name: Marcel
full_name: Triebus, Marcel
id: '66036'
last_name: Triebus
- first_name: Moritz
full_name: Ostermann, Moritz
id: '44763'
last_name: Ostermann
orcid: https://orcid.org/0000-0003-1146-0443
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Ilona
full_name: Horwath, Ilona
id: '68836'
last_name: Horwath
citation:
ama: 'Triebus M, Ostermann M, Tröster T, Horwath I. Advanced Automotive Components
by Fiber-Metal-Laminates. In: Materials in Car Body Engineering - Bad Nauheim.
; 2022.'
apa: Triebus, M., Ostermann, M., Tröster, T., & Horwath, I. (2022). Advanced
Automotive Components by Fiber-Metal-Laminates. Materials in Car Body Engineering
- Bad Nauheim. Materials in Car Body Engineering 2022, Bad Nauheim.
bibtex: '@inproceedings{Triebus_Ostermann_Tröster_Horwath_2022, title={Advanced
Automotive Components by Fiber-Metal-Laminates}, booktitle={Materials in Car Body
Engineering - Bad Nauheim}, author={Triebus, Marcel and Ostermann, Moritz and
Tröster, Thomas and Horwath, Ilona}, year={2022} }'
chicago: Triebus, Marcel, Moritz Ostermann, Thomas Tröster, and Ilona Horwath. “Advanced
Automotive Components by Fiber-Metal-Laminates.” In Materials in Car Body Engineering
- Bad Nauheim, 2022.
ieee: M. Triebus, M. Ostermann, T. Tröster, and I. Horwath, “Advanced Automotive
Components by Fiber-Metal-Laminates,” presented at the Materials in Car Body Engineering
2022, Bad Nauheim, 2022.
mla: Triebus, Marcel, et al. “Advanced Automotive Components by Fiber-Metal-Laminates.”
Materials in Car Body Engineering - Bad Nauheim, 2022.
short: 'M. Triebus, M. Ostermann, T. Tröster, I. Horwath, in: Materials in Car Body
Engineering - Bad Nauheim, 2022.'
conference:
end_date: 2022-07-06
location: Bad Nauheim
name: Materials in Car Body Engineering 2022
start_date: 2022-07-05
date_created: 2022-08-17T08:06:47Z
date_updated: 2023-05-03T08:27:04Z
department:
- _id: '321'
- _id: '9'
- _id: '149'
- _id: '603'
language:
- iso: eng
publication: Materials in Car Body Engineering - Bad Nauheim
quality_controlled: '1'
status: public
title: Advanced Automotive Components by Fiber-Metal-Laminates
type: conference_abstract
user_id: '68836'
year: '2022'
...
---
_id: '34085'
author:
- first_name: Moritz
full_name: Ostermann, Moritz
id: '44763'
last_name: Ostermann
orcid: https://orcid.org/0000-0003-1146-0443
- first_name: Julian
full_name: Grenz, Julian
last_name: Grenz
- first_name: Marcel
full_name: Triebus, Marcel
id: '66036'
last_name: Triebus
- first_name: Felipe
full_name: Cerdas, Felipe
last_name: Cerdas
- first_name: Thorsten
full_name: Marten, Thorsten
last_name: Marten
- first_name: Thomas
full_name: Tröster, Thomas
last_name: Tröster
- first_name: Christoph
full_name: Herrmann, Christoph
last_name: Herrmann
citation:
ama: 'Ostermann M, Grenz J, Triebus M, et al. Integrating Future Energy, Material
and Production Scenarios in Life Cycle Engineering of Automotive Lightweight Structures.
In: Proceedings of the 17th Conference on Sustainable Development of Energy,
Water and Environment Systems. ; 2022.'
apa: Ostermann, M., Grenz, J., Triebus, M., Cerdas, F., Marten, T., Tröster, T.,
& Herrmann, C. (2022). Integrating Future Energy, Material and Production
Scenarios in Life Cycle Engineering of Automotive Lightweight Structures. Proceedings
of the 17th Conference on Sustainable Development of Energy, Water and Environment
Systems. 17th Conference on Sustainable Development of Energy, Water and Environment
Systems, Paphos, Cyprus.
bibtex: '@inproceedings{Ostermann_Grenz_Triebus_Cerdas_Marten_Tröster_Herrmann_2022,
place={Paphos, Cyprus}, title={Integrating Future Energy, Material and Production
Scenarios in Life Cycle Engineering of Automotive Lightweight Structures}, booktitle={Proceedings
of the 17th Conference on Sustainable Development of Energy, Water and Environment
Systems}, author={Ostermann, Moritz and Grenz, Julian and Triebus, Marcel and
Cerdas, Felipe and Marten, Thorsten and Tröster, Thomas and Herrmann, Christoph},
year={2022} }'
chicago: Ostermann, Moritz, Julian Grenz, Marcel Triebus, Felipe Cerdas, Thorsten
Marten, Thomas Tröster, and Christoph Herrmann. “Integrating Future Energy, Material
and Production Scenarios in Life Cycle Engineering of Automotive Lightweight Structures.”
In Proceedings of the 17th Conference on Sustainable Development of Energy,
Water and Environment Systems. Paphos, Cyprus, 2022.
ieee: M. Ostermann et al., “Integrating Future Energy, Material and Production
Scenarios in Life Cycle Engineering of Automotive Lightweight Structures,” presented
at the 17th Conference on Sustainable Development of Energy, Water and Environment
Systems, Paphos, Cyprus, 2022.
mla: Ostermann, Moritz, et al. “Integrating Future Energy, Material and Production
Scenarios in Life Cycle Engineering of Automotive Lightweight Structures.” Proceedings
of the 17th Conference on Sustainable Development of Energy, Water and Environment
Systems, 2022.
short: 'M. Ostermann, J. Grenz, M. Triebus, F. Cerdas, T. Marten, T. Tröster, C.
Herrmann, in: Proceedings of the 17th Conference on Sustainable Development of
Energy, Water and Environment Systems, Paphos, Cyprus, 2022.'
conference:
end_date: 2022-11-10
location: Paphos, Cyprus
name: 17th Conference on Sustainable Development of Energy, Water and Environment
Systems
start_date: 2022-11-06
date_created: 2022-11-15T11:49:53Z
date_updated: 2023-08-21T18:46:23Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
place: Paphos, Cyprus
publication: Proceedings of the 17th Conference on Sustainable Development of Energy,
Water and Environment Systems
status: public
title: Integrating Future Energy, Material and Production Scenarios in Life Cycle
Engineering of Automotive Lightweight Structures
type: conference_abstract
user_id: '44763'
year: '2022'
...
---
_id: '28440'
author:
- first_name: Marcel
full_name: Triebus, Marcel
id: '66036'
last_name: Triebus
- first_name: Alexander
full_name: Reitz, Alexander
id: '24803'
last_name: Reitz
orcid: 0000-0001-9047-467X
- first_name: Olexandr
full_name: Grydin, Olexandr
id: '43822'
last_name: Grydin
- first_name: Julian
full_name: Grenz, Julian
last_name: Grenz
- first_name: Andreas
full_name: Schneidt, Andreas
last_name: Schneidt
- first_name: Rüdiger
full_name: Erhardt, Rüdiger
last_name: Erhardt
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: 'Triebus M, Reitz A, Grydin O, et al. Forming Simulation of Tailored Press
Hardened Parts. In: 13th European LS-DYNA Conference 2021. ; 2021.'
apa: Triebus, M., Reitz, A., Grydin, O., Grenz, J., Schneidt, A., Erhardt, R., Tröster,
T., & Schaper, M. (2021). Forming Simulation of Tailored Press Hardened Parts.
13th European LS-DYNA Conference 2021. 13th European LS-DYNA Conference
2021, Ulm.
bibtex: '@inproceedings{Triebus_Reitz_Grydin_Grenz_Schneidt_Erhardt_Tröster_Schaper_2021,
title={Forming Simulation of Tailored Press Hardened Parts}, booktitle={13th European
LS-DYNA Conference 2021}, author={Triebus, Marcel and Reitz, Alexander and Grydin,
Olexandr and Grenz, Julian and Schneidt, Andreas and Erhardt, Rüdiger and Tröster,
Thomas and Schaper, Mirko}, year={2021} }'
chicago: Triebus, Marcel, Alexander Reitz, Olexandr Grydin, Julian Grenz, Andreas
Schneidt, Rüdiger Erhardt, Thomas Tröster, and Mirko Schaper. “Forming Simulation
of Tailored Press Hardened Parts.” In 13th European LS-DYNA Conference 2021,
2021.
ieee: M. Triebus et al., “Forming Simulation of Tailored Press Hardened Parts,”
presented at the 13th European LS-DYNA Conference 2021, Ulm, 2021.
mla: Triebus, Marcel, et al. “Forming Simulation of Tailored Press Hardened Parts.”
13th European LS-DYNA Conference 2021, 2021.
short: 'M. Triebus, A. Reitz, O. Grydin, J. Grenz, A. Schneidt, R. Erhardt, T. Tröster,
M. Schaper, in: 13th European LS-DYNA Conference 2021, 2021.'
conference:
end_date: 2021-10-06
location: Ulm
name: 13th European LS-DYNA Conference 2021
start_date: 2021-10-04
date_created: 2021-12-08T10:09:49Z
date_updated: 2022-01-06T06:58:05Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
- _id: '158'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.dynalook.com/conferences/13th-european-ls-dyna-conference-2021/forming/triebus_paderborn_university.pdf
oa: '1'
publication: 13th European LS-DYNA Conference 2021
status: public
title: Forming Simulation of Tailored Press Hardened Parts
type: conference
user_id: '66036'
year: '2021'
...
---
_id: '22518'
article_number: '012052'
author:
- first_name: Marcel
full_name: Triebus, Marcel
id: '66036'
last_name: Triebus
- first_name: Jan
full_name: Gierse, Jan
id: '28610'
last_name: Gierse
- first_name: Thorsten
full_name: Marten, Thorsten
id: '338'
last_name: Marten
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Triebus M, Gierse J, Marten T, Tröster T. A new Device for Determination of
Forming-Limit-Curves under Hot-Forming Conditions. IOP Conference Series: Materials
Science and Engineering. Published online 2021. doi:10.1088/1757-899x/1157/1/012052'
apa: 'Triebus, M., Gierse, J., Marten, T., & Tröster, T. (2021). A new Device
for Determination of Forming-Limit-Curves under Hot-Forming Conditions. IOP
Conference Series: Materials Science and Engineering, Article 012052. 40th
International Deep-Drawing Research Group Conference (IDDRG 2021), Virtual - Stuttgart.
https://doi.org/10.1088/1757-899x/1157/1/012052'
bibtex: '@article{Triebus_Gierse_Marten_Tröster_2021, title={A new Device for Determination
of Forming-Limit-Curves under Hot-Forming Conditions}, DOI={10.1088/1757-899x/1157/1/012052},
number={012052}, journal={IOP Conference Series: Materials Science and Engineering},
publisher={IOP Publishing Ltd}, author={Triebus, Marcel and Gierse, Jan and Marten,
Thorsten and Tröster, Thomas}, year={2021} }'
chicago: 'Triebus, Marcel, Jan Gierse, Thorsten Marten, and Thomas Tröster. “A New
Device for Determination of Forming-Limit-Curves under Hot-Forming Conditions.”
IOP Conference Series: Materials Science and Engineering, 2021. https://doi.org/10.1088/1757-899x/1157/1/012052.'
ieee: 'M. Triebus, J. Gierse, T. Marten, and T. Tröster, “A new Device for Determination
of Forming-Limit-Curves under Hot-Forming Conditions,” IOP Conference Series:
Materials Science and Engineering, Art. no. 012052, 2021, doi: 10.1088/1757-899x/1157/1/012052.'
mla: 'Triebus, Marcel, et al. “A New Device for Determination of Forming-Limit-Curves
under Hot-Forming Conditions.” IOP Conference Series: Materials Science and
Engineering, 012052, IOP Publishing Ltd, 2021, doi:10.1088/1757-899x/1157/1/012052.'
short: 'M. Triebus, J. Gierse, T. Marten, T. Tröster, IOP Conference Series: Materials
Science and Engineering (2021).'
conference:
end_date: 2021-07-02
location: Virtual - Stuttgart
name: 40th International Deep-Drawing Research Group Conference (IDDRG 2021)
start_date: 2021-06-21
date_created: 2021-06-28T14:57:26Z
date_updated: 2022-01-06T06:55:35Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.1088/1757-899x/1157/1/012052
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://iopscience.iop.org/article/10.1088/1757-899X/1157/1/012052/pdf
oa: '1'
publication: 'IOP Conference Series: Materials Science and Engineering'
publication_identifier:
issn:
- 1757-8981
- 1757-899X
publication_status: published
publisher: IOP Publishing Ltd
status: public
title: A new Device for Determination of Forming-Limit-Curves under Hot-Forming Conditions
type: journal_article
user_id: '66036'
year: '2021'
...
---
_id: '21726'
author:
- first_name: Marcel
full_name: Triebus, Marcel
id: '66036'
last_name: Triebus
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Triebus M, Tröster T. HyOpt - Optimization-Based Development of Hybrid Materials.
In: 9th NRW Nano Conference - Innovations in Materials and Applications.
; 2021.'
apa: Triebus, M., & Tröster, T. (2021). HyOpt - Optimization-Based Development
of Hybrid Materials. 9th NRW Nano Conference - Innovations in Materials and
Applications. 9th NRW Nano Conference - Innovations in Materials and Applications,
Web.
bibtex: '@inproceedings{Triebus_Tröster_2021, title={HyOpt - Optimization-Based
Development of Hybrid Materials}, booktitle={9th NRW Nano Conference - Innovations
in Materials and Applications}, author={Triebus, Marcel and Tröster, Thomas},
year={2021} }'
chicago: Triebus, Marcel, and Thomas Tröster. “HyOpt - Optimization-Based Development
of Hybrid Materials.” In 9th NRW Nano Conference - Innovations in Materials
and Applications, 2021.
ieee: M. Triebus and T. Tröster, “HyOpt - Optimization-Based Development of Hybrid
Materials,” presented at the 9th NRW Nano Conference - Innovations in Materials
and Applications, Web, 2021.
mla: Triebus, Marcel, and Thomas Tröster. “HyOpt - Optimization-Based Development
of Hybrid Materials.” 9th NRW Nano Conference - Innovations in Materials and
Applications, 2021.
short: 'M. Triebus, T. Tröster, in: 9th NRW Nano Conference - Innovations in Materials
and Applications, 2021.'
conference:
end_date: 2021-04-23
location: Web
name: 9th NRW Nano Conference - Innovations in Materials and Applications
start_date: 2021-04-21
date_created: 2021-04-23T13:05:47Z
date_updated: 2022-08-17T08:07:39Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.researchgate.net/publication/351224925_HyOpt_-_Optimization-Based_Development_of_Hybrid_Materials
oa: '1'
publication: 9th NRW Nano Conference - Innovations in Materials and Applications
status: public
title: HyOpt - Optimization-Based Development of Hybrid Materials
type: conference_abstract
user_id: '66036'
year: '2021'
...
---
_id: '16939'
author:
- first_name: Marcel
full_name: Triebus, Marcel
id: '66036'
last_name: Triebus
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Triebus M, Tröster T. A Holistic Approach to Optimization-Based Design of
Hybrid Materials. In: Proceedings 4th International Conference Hybrid Materials
& Structures. ; 2020.'
apa: Triebus, M., & Tröster, T. (2020). A Holistic Approach to Optimization-Based
Design of Hybrid Materials. In Proceedings 4th International Conference Hybrid
Materials & Structures. Web-Conference.
bibtex: '@inproceedings{Triebus_Tröster_2020, title={A Holistic Approach to Optimization-Based
Design of Hybrid Materials}, booktitle={Proceedings 4th International Conference
Hybrid Materials & Structures}, author={Triebus, Marcel and Tröster, Thomas},
year={2020} }'
chicago: Triebus, Marcel, and Thomas Tröster. “A Holistic Approach to Optimization-Based
Design of Hybrid Materials.” In Proceedings 4th International Conference Hybrid
Materials & Structures, 2020.
ieee: M. Triebus and T. Tröster, “A Holistic Approach to Optimization-Based Design
of Hybrid Materials,” in Proceedings 4th International Conference Hybrid Materials
& Structures, Web-Conference, 2020.
mla: Triebus, Marcel, and Thomas Tröster. “A Holistic Approach to Optimization-Based
Design of Hybrid Materials.” Proceedings 4th International Conference Hybrid
Materials & Structures, 2020.
short: 'M. Triebus, T. Tröster, in: Proceedings 4th International Conference Hybrid
Materials & Structures, 2020.'
conference:
end_date: 2020-04-29
location: Web-Conference
name: 4th International Conference Hybrid Materials & Structures 2020
start_date: 2020-04-28
date_created: 2020-05-06T10:45:19Z
date_updated: 2022-01-06T06:52:59Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://hybrid2020.dgm.de/fileadmin/Tagungen/2020/2020-04-Hybrid-Materials/02-Graphik-Druckwerke/2020-Hybrid-Proceedings.pdf
oa: '1'
publication: Proceedings 4th International Conference Hybrid Materials & Structures
status: public
title: A Holistic Approach to Optimization-Based Design of Hybrid Materials
type: conference
user_id: '66036'
year: '2020'
...
---
_id: '16030'
author:
- first_name: Marcel
full_name: Triebus, Marcel
id: '66036'
last_name: Triebus
- first_name: S.
full_name: Bienia, S.
last_name: Bienia
- first_name: Thorsten
full_name: Marten, Thorsten
id: '338'
last_name: Marten
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: K.
full_name: Dröder, K.
last_name: Dröder
citation:
ama: 'Triebus M, Bienia S, Marten T, Tröster T, Dröder K. Press Hardening Integrated
Structuring for Hybrid Components. In: Verlag Wissenschaftliche Scripten; 2019.'
apa: 'Triebus, M., Bienia, S., Marten, T., Tröster, T., & Dröder, K. (2019).
Press Hardening Integrated Structuring for Hybrid Components. Presented at the
7th International Conference on Hot Sheet Metal Forming of High-Performance Steel,
Lulea, Sweden: Verlag Wissenschaftliche Scripten.'
bibtex: '@inproceedings{Triebus_Bienia_Marten_Tröster_Dröder_2019, title={Press
Hardening Integrated Structuring for Hybrid Components}, publisher={Verlag Wissenschaftliche
Scripten}, author={Triebus, Marcel and Bienia, S. and Marten, Thorsten and Tröster,
Thomas and Dröder, K.}, year={2019} }'
chicago: Triebus, Marcel, S. Bienia, Thorsten Marten, Thomas Tröster, and K. Dröder.
“Press Hardening Integrated Structuring for Hybrid Components.” Verlag Wissenschaftliche
Scripten, 2019.
ieee: M. Triebus, S. Bienia, T. Marten, T. Tröster, and K. Dröder, “Press Hardening
Integrated Structuring for Hybrid Components,” presented at the 7th International
Conference on Hot Sheet Metal Forming of High-Performance Steel, Lulea, Sweden,
2019.
mla: Triebus, Marcel, et al. Press Hardening Integrated Structuring for Hybrid
Components. Verlag Wissenschaftliche Scripten, 2019.
short: 'M. Triebus, S. Bienia, T. Marten, T. Tröster, K. Dröder, in: Verlag Wissenschaftliche
Scripten, 2019.'
conference:
end_date: 2019-06-05
location: Lulea, Sweden
name: 7th International Conference on Hot Sheet Metal Forming of High-Performance
Steel
start_date: 2019-06-02
date_created: 2020-02-24T14:41:21Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
publication_identifier:
isbn:
- 978-3-95735-104-3
publisher: Verlag Wissenschaftliche Scripten
status: public
title: Press Hardening Integrated Structuring for Hybrid Components
type: conference
user_id: '72008'
year: '2019'
...
---
_id: '16042'
author:
- first_name: Marcel
full_name: Triebus, Marcel
id: '66036'
last_name: Triebus
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Alan Adam
full_name: Camberg, Alan Adam
id: '60544'
last_name: Camberg
- first_name: S.
full_name: Bienia, S.
last_name: Bienia
- first_name: K.
full_name: Dröder, K.
last_name: Dröder
citation:
ama: 'Triebus M, Tröster T, Camberg AA, Bienia S, Dröder K. Modelling the Interface
of Hybrid Metal-FRP Components Joint by Form Closures. In: 15. Deutsches LS-Dyna
Forum. ; 2018.'
apa: Triebus, M., Tröster, T., Camberg, A. A., Bienia, S., & Dröder, K. (2018).
Modelling the Interface of Hybrid Metal-FRP Components Joint by Form Closures.
In 15. Deutsches LS-Dyna Forum. Bamberg.
bibtex: '@inproceedings{Triebus_Tröster_Camberg_Bienia_Dröder_2018, title={Modelling
the Interface of Hybrid Metal-FRP Components Joint by Form Closures}, booktitle={15.
Deutsches LS-Dyna Forum}, author={Triebus, Marcel and Tröster, Thomas and Camberg,
Alan Adam and Bienia, S. and Dröder, K.}, year={2018} }'
chicago: Triebus, Marcel, Thomas Tröster, Alan Adam Camberg, S. Bienia, and K. Dröder.
“Modelling the Interface of Hybrid Metal-FRP Components Joint by Form Closures.”
In 15. Deutsches LS-Dyna Forum, 2018.
ieee: M. Triebus, T. Tröster, A. A. Camberg, S. Bienia, and K. Dröder, “Modelling
the Interface of Hybrid Metal-FRP Components Joint by Form Closures,” in 15.
Deutsches LS-Dyna Forum, Bamberg, 2018.
mla: Triebus, Marcel, et al. “Modelling the Interface of Hybrid Metal-FRP Components
Joint by Form Closures.” 15. Deutsches LS-Dyna Forum, 2018.
short: 'M. Triebus, T. Tröster, A.A. Camberg, S. Bienia, K. Dröder, in: 15. Deutsches
LS-Dyna Forum, 2018.'
conference:
end_date: 2018-10-17
location: Bamberg
name: 15. Deutsches LS-Dyna Forum
start_date: 2018-10-15
date_created: 2020-02-24T16:03:13Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.dynamore.de/de/download/papers/2018-ls-dyna-forum/papers-2018/montag-15.-oktober-2018/crash-lightweight-composites/modelling-the-interface-of-hybrid-metal-frp-components-joint-by-form-closures
oa: '1'
popular_science: '1'
publication: 15. Deutsches LS-Dyna Forum
status: public
title: Modelling the Interface of Hybrid Metal-FRP Components Joint by Form Closures
type: conference
user_id: '60544'
year: '2018'
...