---
_id: '64562'
abstract:
- lang: ger
  text: Für das Verständnis und die Weiterentwicklung temperaturgestützter mechanischer
    Fü-geprozesse mit thermoplastischen Faser-Kunststoff-Verbunden (FKV) ist die zerstörungsfreie
    Analyse der Materialstruktur im Inneren des Fügepunktes während der Entstehung
    und Belastung erforderlich. Die Kombination aus Prüfung unter Temperatureinfluss
    und in situ Computertomographie (CT) eröffnet neue Möglichkeiten für die Fügeprozessanalyse.
    Dazu wurde dazu eine Thermokammer entwickelt und in eine bestehende in situ CT-Anlage
    integriert. Anwendungsszenarien sind die Herstellung und Prüfung von Fügepunkten
    unter Temperatur. Die Erwärmung erfolgt über einzeln regelbare Heizzonen, welche
    eine gezielte Temperaturführung über die gesamte Probengeometrie ermöglichen.
    Die Temperaturkurve eines Aufheizversuchs, sowie eine Röntgenprojektion einer
    Probe innerhalb der Thermokammer validie-ren die Konstruktion.
author:
- first_name: Alrik
  full_name: Dargel, Alrik
  id: '114764'
  last_name: Dargel
- first_name: Daniel
  full_name: Köhler, Daniel
  id: '83408'
  last_name: Köhler
- first_name: Maik
  full_name: Gude, Maik
  last_name: Gude
- first_name: Robert
  full_name: Kupfer, Robert
  last_name: Kupfer
citation:
  ama: 'Dargel A, Köhler D, Gude M, Kupfer R. In situ CT unter Temperatur: Thermokammer
    für thermoplastische FKV-Fügeprozesse. In: Zimmermann M, ed. <i>Tagungsband 43.
    Vortrags- und Diskussionstagung Werkstoffprüfung 2025</i>. Vol 43. Deutsche Gesellschaft
    für Materialkunde e.V. (DGM); 2025:165-170.'
  apa: 'Dargel, A., Köhler, D., Gude, M., &#38; Kupfer, R. (2025). In situ CT unter
    Temperatur: Thermokammer für thermoplastische FKV-Fügeprozesse. In M. Zimmermann
    (Ed.), <i>Tagungsband 43. Vortrags- und Diskussionstagung Werkstoffprüfung 2025</i>
    (Vol. 43, pp. 165–170). Deutsche Gesellschaft für Materialkunde e.V. (DGM).'
  bibtex: '@inproceedings{Dargel_Köhler_Gude_Kupfer_2025, place={Sankt Augustin},
    title={In situ CT unter Temperatur: Thermokammer für thermoplastische FKV-Fügeprozesse},
    volume={43}, booktitle={Tagungsband 43. Vortrags- und Diskussionstagung Werkstoffprüfung
    2025}, publisher={Deutsche Gesellschaft für Materialkunde e.V. (DGM)}, author={Dargel,
    Alrik and Köhler, Daniel and Gude, Maik and Kupfer, Robert}, editor={Zimmermann,
    Martina}, year={2025}, pages={165–170} }'
  chicago: 'Dargel, Alrik, Daniel Köhler, Maik Gude, and Robert Kupfer. “In situ CT
    unter Temperatur: Thermokammer für thermoplastische FKV-Fügeprozesse.” In <i>Tagungsband
    43. Vortrags- und Diskussionstagung Werkstoffprüfung 2025</i>, edited by Martina
    Zimmermann, 43:165–70. Sankt Augustin: Deutsche Gesellschaft für Materialkunde
    e.V. (DGM), 2025.'
  ieee: 'A. Dargel, D. Köhler, M. Gude, and R. Kupfer, “In situ CT unter Temperatur:
    Thermokammer für thermoplastische FKV-Fügeprozesse,” in <i>Tagungsband 43. Vortrags-
    und Diskussionstagung Werkstoffprüfung 2025</i>, Dresden, 2025, vol. 43, pp. 165–170.'
  mla: 'Dargel, Alrik, et al. “In situ CT unter Temperatur: Thermokammer für thermoplastische
    FKV-Fügeprozesse.” <i>Tagungsband 43. Vortrags- und Diskussionstagung Werkstoffprüfung
    2025</i>, edited by Martina Zimmermann, vol. 43, Deutsche Gesellschaft für Materialkunde
    e.V. (DGM), 2025, pp. 165–70.'
  short: 'A. Dargel, D. Köhler, M. Gude, R. Kupfer, in: M. Zimmermann (Ed.), Tagungsband
    43. Vortrags- und Diskussionstagung Werkstoffprüfung 2025, Deutsche Gesellschaft
    für Materialkunde e.V. (DGM), Sankt Augustin, 2025, pp. 165–170.'
conference:
  end_date: 2025-11-28
  location: Dresden
  name: 43. Vortrags- und Diskussionstagung Werkstoffprüfung 2025
  start_date: 2025-11-27
date_created: 2026-02-20T14:17:33Z
date_updated: 2026-02-24T15:12:59Z
ddc:
- '620'
editor:
- first_name: Martina
  full_name: Zimmermann, Martina
  last_name: Zimmermann
file:
- access_level: closed
  content_type: application/pdf
  creator: adargel
  date_created: 2026-02-20T14:14:36Z
  date_updated: 2026-02-20T14:14:36Z
  file_id: '64564'
  file_name: V-31-Dargel_v03.pdf
  file_size: 398450
  relation: main_file
  success: 1
file_date_updated: 2026-02-20T14:14:36Z
has_accepted_license: '1'
intvolume: '        43'
keyword:
- in situ CT
- Thermokammer
- Thermoplastische FKV
language:
- iso: ger
page: 165-170
place: Sankt Augustin
project:
- _id: '130'
  name: 'TRR 285:  Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen
    Prozessketten'
- _id: '148'
  name: TRR 285 - Subproject C04
publication: Tagungsband 43. Vortrags- und Diskussionstagung Werkstoffprüfung 2025
publication_identifier:
  isbn:
  - 978-3-88355-454-9
publication_status: published
publisher: Deutsche Gesellschaft für Materialkunde e.V. (DGM)
status: public
title: 'In situ CT unter Temperatur: Thermokammer für thermoplastische FKV-Fügeprozesse'
type: conference
user_id: '114764'
volume: 43
year: '2025'
...
---
_id: '61767'
abstract:
- lang: eng
  text: "<jats:title>Abstract</jats:title>\r\n          <jats:p>A clinch point’s quality
    is usually assessed using ex situ destructive testing methods. These, however,
    are unable to detect phenomena immediately during the joining process. For instance,
    elastic deformations reverse and cracks close after unloading. In situ methods
    such as the force-displacement evaluation are used to investigate a clinching
    process, though deviations in the clinch point geometry cannot be derived with
    this method. To overcome these limitations, the clinching process can be investigated
    using in situ computed tomography (in situ CT). When investigating the clinching
    of aluminum parts in in situ CT, the sheet-sheet interface is hardly visible.
    Earlier investigations showed that radiopaque materials can be applied between
    the joining parts to enhance the detectability of the sheet-sheet interface. However,
    the layers cause strong artefacts, break during the clinching process or change
    the clinch joint’s properties significantly. In this paper, a minimally invasive
    method to enhance the interface detectability is presented. First, the aluminum
    oxide layer is removed by etching. Second, the specimen is electroplated with
    copper or gold, respectively. In some cases, a mask is applied to create a cross-shaped
    plating pattern. Then, the plated specimen is clinched with a non-plated counterpart
    and the interface detectability of the clinch points is assessed in CT scans.
    It is shown that a copper plating of 2.6–4 μm can visualize some parts of the
    interface, while 7–9 μm is suitable to enhance the detectability of the sheet-sheet
    interface almost continuously.</jats:p>"
article_number: '131'
article_type: original
author:
- first_name: Daniel
  full_name: Köhler, Daniel
  id: '83408'
  last_name: Köhler
- first_name: Alrik
  full_name: Dargel, Alrik
  id: '114764'
  last_name: Dargel
- first_name: Juliane
  full_name: Troschitz, Juliane
  last_name: Troschitz
- first_name: Maik
  full_name: Gude, Maik
  last_name: Gude
- first_name: Robert
  full_name: Kupfer, Robert
  last_name: Kupfer
citation:
  ama: Köhler D, Dargel A, Troschitz J, Gude M, Kupfer R. In Situ CT of Clinch Points
    – Enhancing Interface Detectability Using Electroplated Patterns of Radiopaque
    Materials. <i>Journal of Nondestructive Evaluation</i>. 2025;44(4). doi:<a href="https://doi.org/10.1007/s10921-025-01270-1">10.1007/s10921-025-01270-1</a>
  apa: Köhler, D., Dargel, A., Troschitz, J., Gude, M., &#38; Kupfer, R. (2025). In
    Situ CT of Clinch Points – Enhancing Interface Detectability Using Electroplated
    Patterns of Radiopaque Materials. <i>Journal of Nondestructive Evaluation</i>,
    <i>44</i>(4), Article 131. <a href="https://doi.org/10.1007/s10921-025-01270-1">https://doi.org/10.1007/s10921-025-01270-1</a>
  bibtex: '@article{Köhler_Dargel_Troschitz_Gude_Kupfer_2025, title={In Situ CT of
    Clinch Points – Enhancing Interface Detectability Using Electroplated Patterns
    of Radiopaque Materials}, volume={44}, DOI={<a href="https://doi.org/10.1007/s10921-025-01270-1">10.1007/s10921-025-01270-1</a>},
    number={4131}, journal={Journal of Nondestructive Evaluation}, publisher={Springer
    Science and Business Media LLC}, author={Köhler, Daniel and Dargel, Alrik and
    Troschitz, Juliane and Gude, Maik and Kupfer, Robert}, year={2025} }'
  chicago: Köhler, Daniel, Alrik Dargel, Juliane Troschitz, Maik Gude, and Robert
    Kupfer. “In Situ CT of Clinch Points – Enhancing Interface Detectability Using
    Electroplated Patterns of Radiopaque Materials.” <i>Journal of Nondestructive
    Evaluation</i> 44, no. 4 (2025). <a href="https://doi.org/10.1007/s10921-025-01270-1">https://doi.org/10.1007/s10921-025-01270-1</a>.
  ieee: 'D. Köhler, A. Dargel, J. Troschitz, M. Gude, and R. Kupfer, “In Situ CT of
    Clinch Points – Enhancing Interface Detectability Using Electroplated Patterns
    of Radiopaque Materials,” <i>Journal of Nondestructive Evaluation</i>, vol. 44,
    no. 4, Art. no. 131, 2025, doi: <a href="https://doi.org/10.1007/s10921-025-01270-1">10.1007/s10921-025-01270-1</a>.'
  mla: Köhler, Daniel, et al. “In Situ CT of Clinch Points – Enhancing Interface Detectability
    Using Electroplated Patterns of Radiopaque Materials.” <i>Journal of Nondestructive
    Evaluation</i>, vol. 44, no. 4, 131, Springer Science and Business Media LLC,
    2025, doi:<a href="https://doi.org/10.1007/s10921-025-01270-1">10.1007/s10921-025-01270-1</a>.
  short: D. Köhler, A. Dargel, J. Troschitz, M. Gude, R. Kupfer, Journal of Nondestructive
    Evaluation 44 (2025).
date_created: 2025-10-09T08:27:41Z
date_updated: 2026-02-24T15:13:52Z
doi: 10.1007/s10921-025-01270-1
intvolume: '        44'
issue: '4'
language:
- iso: eng
project:
- _id: '133'
  name: TRR 285 - Project Area C
- _id: '130'
  name: 'TRR 285:  Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen
    Prozessketten'
- _id: '148'
  name: TRR 285 - Subproject C04
publication: Journal of Nondestructive Evaluation
publication_identifier:
  issn:
  - 0195-9298
  - 1573-4862
publication_status: published
publisher: Springer Science and Business Media LLC
status: public
title: In Situ CT of Clinch Points – Enhancing Interface Detectability Using Electroplated
  Patterns of Radiopaque Materials
type: journal_article
user_id: '114764'
volume: 44
year: '2025'
...
---
_id: '61149'
abstract:
- lang: eng
  text: The use of continuous fiber-reinforced thermoplastics (FRTP) in automotive
    industry increases due to their excellent material properties and possibility
    of rapid processing. The scale spanning heterogeneity of their material structure
    and its influence on the material behavior, however, presents significant challenges
    for most joining technologies, such as self-piercing riveting (SPR). During mechanical
    joining, the material structure is significantly altered within and around the
    joining zone, heavily influencing the material behavior. A comprehensive understanding
    of the underlying phenomena of material alteration during the SPR process is essential
    as basis for validating numerical simulations. This study examines the material
    structure at ten stages of a step-setting test of SPR with two FRTP sheets with
    glass-fiber reinforcement. Utilizing X-ray computed tomography (CT), the damage
    phenomena within different areas of the setting test are analyzed three-dimensionally
    and key parameters are quantified. Dominating phenomena during the penetration
    of the rivet into the laminate are fiber failure (FF), interfiber failure (IFF)
    and fiber bending, while delamination, fiber kinking and roving splitting are
    also observed. At the final stages, the bottom layers of the second sheet collapse
    and form a bulge into the cavity of the die.
author:
- first_name: Alrik
  full_name: Dargel, Alrik
  id: '114764'
  last_name: Dargel
- first_name: Benjamin
  full_name: Gröger, Benjamin
  last_name: Gröger
- first_name: Malte Christian
  full_name: Schlichter, Malte Christian
  id: '61977'
  last_name: Schlichter
- first_name: Johannes
  full_name: Gerritzen, Johannes
  id: '105344'
  last_name: Gerritzen
  orcid: 0000-0002-0169-8602
- first_name: Daniel
  full_name: Köhler, Daniel
  id: '83408'
  last_name: Köhler
- first_name: Gerson
  full_name: Meschut, Gerson
  id: '32056'
  last_name: Meschut
  orcid: 0000-0002-2763-1246
- first_name: Maik
  full_name: Gude, Maik
  last_name: Gude
- first_name: Robert
  full_name: Kupfer, Robert
  last_name: Kupfer
citation:
  ama: 'Dargel A, Gröger B, Schlichter MC, et al. LOCAL DEFORMATION AND FAILURE OF
    COMPOSITES DURING SELF-PIERCING RIVETING: A CT BASED MICROSTRUCTURE INVESTIGATION.
    In: Gomes JFS, Meguid SA, eds. <i>Proceedings of the 8th International Conference
    on Integrity-Reliability-Failure (IRF2025)</i>. FEUP; 2025. doi:<a href="https://doi.org/10.24840/978-972-752-323-8">10.24840/978-972-752-323-8</a>'
  apa: 'Dargel, A., Gröger, B., Schlichter, M. C., Gerritzen, J., Köhler, D., Meschut,
    G., Gude, M., &#38; Kupfer, R. (2025). LOCAL DEFORMATION AND FAILURE OF COMPOSITES
    DURING SELF-PIERCING RIVETING: A CT BASED MICROSTRUCTURE INVESTIGATION. In J.
    F. S. Gomes &#38; S. A. Meguid (Eds.), <i>Proceedings of the 8th International
    Conference on Integrity-Reliability-Failure (IRF2025)</i>. FEUP. <a href="https://doi.org/10.24840/978-972-752-323-8">https://doi.org/10.24840/978-972-752-323-8</a>'
  bibtex: '@inproceedings{Dargel_Gröger_Schlichter_Gerritzen_Köhler_Meschut_Gude_Kupfer_2025,
    place={Porto}, title={LOCAL DEFORMATION AND FAILURE OF COMPOSITES DURING SELF-PIERCING
    RIVETING: A CT BASED MICROSTRUCTURE INVESTIGATION}, DOI={<a href="https://doi.org/10.24840/978-972-752-323-8">10.24840/978-972-752-323-8</a>},
    booktitle={Proceedings of the 8th International Conference on Integrity-Reliability-Failure
    (IRF2025)}, publisher={FEUP}, author={Dargel, Alrik and Gröger, Benjamin and Schlichter,
    Malte Christian and Gerritzen, Johannes and Köhler, Daniel and Meschut, Gerson
    and Gude, Maik and Kupfer, Robert}, editor={Gomes, J.F. Silva and Meguid, Shaker
    A.}, year={2025} }'
  chicago: 'Dargel, Alrik, Benjamin Gröger, Malte Christian Schlichter, Johannes Gerritzen,
    Daniel Köhler, Gerson Meschut, Maik Gude, and Robert Kupfer. “LOCAL DEFORMATION
    AND FAILURE OF COMPOSITES DURING SELF-PIERCING RIVETING: A CT BASED MICROSTRUCTURE
    INVESTIGATION.” In <i>Proceedings of the 8th International Conference on Integrity-Reliability-Failure
    (IRF2025)</i>, edited by J.F. Silva Gomes and Shaker A. Meguid. Porto: FEUP, 2025.
    <a href="https://doi.org/10.24840/978-972-752-323-8">https://doi.org/10.24840/978-972-752-323-8</a>.'
  ieee: 'A. Dargel <i>et al.</i>, “LOCAL DEFORMATION AND FAILURE OF COMPOSITES DURING
    SELF-PIERCING RIVETING: A CT BASED MICROSTRUCTURE INVESTIGATION,” in <i>Proceedings
    of the 8th International Conference on Integrity-Reliability-Failure (IRF2025)</i>,
    Porto, 2025, doi: <a href="https://doi.org/10.24840/978-972-752-323-8">10.24840/978-972-752-323-8</a>.'
  mla: 'Dargel, Alrik, et al. “LOCAL DEFORMATION AND FAILURE OF COMPOSITES DURING
    SELF-PIERCING RIVETING: A CT BASED MICROSTRUCTURE INVESTIGATION.” <i>Proceedings
    of the 8th International Conference on Integrity-Reliability-Failure (IRF2025)</i>,
    edited by J.F. Silva Gomes and Shaker A. Meguid, FEUP, 2025, doi:<a href="https://doi.org/10.24840/978-972-752-323-8">10.24840/978-972-752-323-8</a>.'
  short: 'A. Dargel, B. Gröger, M.C. Schlichter, J. Gerritzen, D. Köhler, G. Meschut,
    M. Gude, R. Kupfer, in: J.F.S. Gomes, S.A. Meguid (Eds.), Proceedings of the 8th
    International Conference on Integrity-Reliability-Failure (IRF2025), FEUP, Porto,
    2025.'
conference:
  end_date: 2025-07-18
  location: Porto
  name: 8th International Conference on Integrity-Reliability-Failure (IRF2025)
  start_date: 2025-07-15
date_created: 2025-09-08T11:52:45Z
date_updated: 2026-02-27T06:45:17Z
doi: 10.24840/978-972-752-323-8
editor:
- first_name: J.F. Silva
  full_name: Gomes, J.F. Silva
  last_name: Gomes
- first_name: Shaker A.
  full_name: Meguid, Shaker A.
  last_name: Meguid
keyword:
- self-piercing riveting
- computed tomography
- thermoplastic composites
- process-structure-interaction
language:
- iso: eng
main_file_link:
- open_access: '1'
  url: https://www.researchgate.net/publication/395593556_LOCAL_DEFORMATION_AND_FAILURE_OF_COMPOSITES_DURING_SELF-PIERCING_RIVETING_A_CT_BASED_MICROSTRUCTURE_INVESTIGATION
oa: '1'
place: Porto
project:
- _id: '133'
  name: TRR 285 - Project Area C
- _id: '148'
  name: TRR 285 - Subproject C04
- _id: '130'
  name: 'TRR 285:  Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen
    Prozessketten'
- _id: '131'
  name: TRR 285 - Project Area A
- _id: '137'
  name: TRR 285 - Subproject A03
- _id: '135'
  name: TRR 285 - Subproject A01
publication: Proceedings of the 8th International Conference on Integrity-Reliability-Failure
  (IRF2025)
publication_identifier:
  isbn:
  - '9789727523238'
publication_status: published
publisher: FEUP
status: public
title: 'LOCAL DEFORMATION AND FAILURE OF COMPOSITES DURING SELF-PIERCING RIVETING:
  A CT BASED MICROSTRUCTURE INVESTIGATION'
type: conference
user_id: '105344'
year: '2025'
...
---
_id: '51191'
abstract:
- lang: ger
  text: Zur Qualitätssicherung von Clinchpunkten werden häufig ex-situ Methoden, wie
    etwa Schliffbildanalysen, eingesetzt. Diese ermöglichen jedoch nicht die Berücksichtigung
    von Phänomenen, die während der Belastung auftreten, da sich nach der Entlastung
    elastische Deformationen zurückbilden und Risse wieder schließen. Dagegen kann
    mit der in-situ Computertomographie (CT) der innere Deformationszustand des Clinchpunkts,
    z.B. während eines Scherzugversuchs, untersucht werden. Hierbei ist es für artgleiche
    Werkstoffe aufgrund der hohen Pressungen im Clinchpunkt schwierig, die Trennfläche
    zwischen den Fügepartnern im CT-Scan zu erkennen. Daher wird eine radioopake Zwischenschicht
    aus Zinn in die Trennfläche eingebracht. In dieser Arbeit wird der Einfluss der
    Zwischenschicht auf die in-situ CT-Scherzugprüfung untersucht. Hierzu werden sowohl
    Kraft-Verlängerungs-Kurven als auch die Geometrie der Clinchpunkte während der
    Belastung verglichen.
author:
- first_name: Daniel
  full_name: Köhler, Daniel
  id: '83408'
  last_name: Köhler
- first_name: Robert
  full_name: Kupfer, Robert
  last_name: Kupfer
- first_name: Juliane
  full_name: Troschitz, Juliane
  last_name: Troschitz
- first_name: Maik
  full_name: Gude, Maik
  last_name: Gude
citation:
  ama: 'Köhler D, Kupfer R, Troschitz J, Gude M. Untersuchung zum Einfluss radioopaker
    Zwischenschichten bei der in-situ CT geclinchter Verbindungen. In: Zimmermann
    M, ed. <i>Tagungsband zur Werkstoffprüfung 2022</i>. ; 2022.'
  apa: Köhler, D., Kupfer, R., Troschitz, J., &#38; Gude, M. (2022). Untersuchung
    zum Einfluss radioopaker Zwischenschichten bei der in-situ CT geclinchter Verbindungen.
    In M. Zimmermann (Ed.), <i>Tagungsband zur Werkstoffprüfung 2022</i>.
  bibtex: '@inproceedings{Köhler_Kupfer_Troschitz_Gude_2022, place={Dresden}, title={Untersuchung
    zum Einfluss radioopaker Zwischenschichten bei der in-situ CT geclinchter Verbindungen},
    booktitle={Tagungsband zur Werkstoffprüfung 2022}, author={Köhler, Daniel and
    Kupfer, Robert and Troschitz, Juliane and Gude, Maik}, editor={Zimmermann, Martina},
    year={2022} }'
  chicago: Köhler, Daniel, Robert Kupfer, Juliane Troschitz, and Maik Gude. “Untersuchung
    zum Einfluss radioopaker Zwischenschichten bei der in-situ CT geclinchter Verbindungen.”
    In <i>Tagungsband zur Werkstoffprüfung 2022</i>, edited by Martina Zimmermann.
    Dresden, 2022.
  ieee: D. Köhler, R. Kupfer, J. Troschitz, and M. Gude, “Untersuchung zum Einfluss
    radioopaker Zwischenschichten bei der in-situ CT geclinchter Verbindungen,” in
    <i>Tagungsband zur Werkstoffprüfung 2022</i>, Dresden, 2022.
  mla: Köhler, Daniel, et al. “Untersuchung zum Einfluss radioopaker Zwischenschichten
    bei der in-situ CT geclinchter Verbindungen.” <i>Tagungsband zur Werkstoffprüfung
    2022</i>, edited by Martina Zimmermann, 2022.
  short: 'D. Köhler, R. Kupfer, J. Troschitz, M. Gude, in: M. Zimmermann (Ed.), Tagungsband
    zur Werkstoffprüfung 2022, Dresden, 2022.'
conference:
  end_date: 2022-10-28
  location: Dresden
  name: 40. Vortrags- und Diskussionstagung "Werkstoffprüfung 2022"
  start_date: 2022-10-27
date_created: 2024-02-06T14:57:37Z
date_updated: 2025-06-02T20:17:55Z
department:
- _id: '157'
- _id: '43'
editor:
- first_name: Martina
  full_name: Zimmermann, Martina
  last_name: Zimmermann
language:
- iso: ger
place: Dresden
project:
- _id: '133'
  name: 'TRR 285 - C: TRR 285 - Project Area C'
- _id: '130'
  grant_number: '418701707'
  name: 'TRR 285: TRR 285'
- _id: '148'
  name: 'TRR 285 – C04: TRR 285 - Subproject C04'
publication: Tagungsband zur Werkstoffprüfung 2022
status: public
title: Untersuchung zum Einfluss radioopaker Zwischenschichten bei der in-situ CT
  geclinchter Verbindungen
type: conference
user_id: '83408'
year: '2022'
...