@article{58379,
  abstract     = {{Injection molding plays a pivotal role in modern manufacturing, enabling the mass production of complex components with high precision. However, traditional tooling methods often face challenges related to thermal management, design constraints, and material efficiency. This study examines the use of additive manufacturing (AM) in the development and optimization of injection molding tools to overcome these limitations. A novel prototype was fabricated using AM techniques, incorporating integrated cooling channels and optimized lattice structures to enhance thermal performance and simplify the manufacturing process. Experimental validation demonstrated the prototype’s effective integration into a vacuum-assisted resin transfer molding (VA-LRTM) system without requiring modifications to existing tooling setups. The results showed significant improvements in temperature regulation, reduced cycle times, and consistent mechanical properties of the molded components compared to conventional approaches. By reducing the number of tool components and eliminating the need for support structures during manufacturing, AM also minimized material waste and post-processing requirements. This research highlights the transformative potential of additive manufacturing in injection molding tool design, offering increased flexibility, cost efficiency, and enhanced functionality to meet the evolving demands of modern industrial applications.}},
  author       = {{Chalicheemalapalli Jayasankar, Deviprasad and Tröster, Thomas and Marten, Thorsten}},
  issn         = {{1996-1944}},
  journal      = {{Materials}},
  number       = {{3}},
  publisher    = {{MDPI AG}},
  title        = {{{Optimizing Injection Molding Tool Design with Additive Manufacturing: A Focus on Thermal Performance and Process Efficiency}}},
  doi          = {{10.3390/ma18030571}},
  volume       = {{18}},
  year         = {{2025}},
}

@inproceedings{62302,
  abstract     = {{The degree of crosslinking in unidirectional prepreg materials was investigated using differential scanning calorimetry to assess their curing behavior and thermal characteristics. To complement these measurements with a non-destructive, in-situ method, the propagation properties of guided acoustic waves in cured carbon fibre-reinforced epoxy plates were analysed. Correlations between the degree of crosslinking and acoustically determined mechanical properties were drawn to enable a future non-destructive evaluation approach.}},
  author       = {{Irmak, Hayrettin and Claes, Leander and Wu, Shuang and Marten, Thorsten and Tröster, Thomas}},
  booktitle    = {{2025 International Congress on Ultrasonics}},
  isbn         = {{978-3-910600-08-9}},
  keywords     = {{fibre-reinforced polymers, differential scanning calorimetry, degree of crosslinking, guided waves, ultrasound}},
  location     = {{Paderborn, Germany}},
  pages        = {{235–238}},
  publisher    = {{AMA Service GmbH}},
  title        = {{{Assessment of the influence of curing parameters on fibre reinforced epoxy composite properties using guided ultrasonic waves}}},
  doi          = {{10.5162/ultrasonic2025/c13-b3}},
  year         = {{2025}},
}

@inproceedings{65124,
  abstract     = {{<jats:p>To remain competitive, companies must continuously adapt their value proposition, especially in response to increasing demands for sustainability and digitalisation. Small and medium-sized enterprises often struggle to implement future-oriented digital business models. The aim is to develop decision support to help companies plan ahead and assess their value proposition, with a focus on foresighted planning. Based on literature research, expert interviews and the analysis of existing solutions, an understanding of “sustainable value” and requirements of decision support are defined. Decision support is implemented in a software. The main contribution is the setup of functions and content such as a list of influence factors, analysing influences and evaluating ideas, control questions and support for the implementation of digital business models. Validation through expert interviews and workshops in mechanical and plant engineering shows that the software supports enterprises in foresighted planning of value proposition and the selection of a concept for digital business models. It makes them robust towards the variety of future scenarios.</jats:p>}},
  author       = {{Gräßler, Iris and Tusek, Alena Marie}},
  booktitle    = {{AHFE International}},
  issn         = {{2771-0718}},
  publisher    = {{AHFE International}},
  title        = {{{Software-supported decision support for the foresighted planning of digital business models}}},
  doi          = {{10.54941/ahfe1006769}},
  volume       = {{198}},
  year         = {{2025}},
}

@inbook{65160,
  author       = {{Kamcili-Yildiz, Naciye and Keuchen, Marion}},
  booktitle    = {{Was hat das mit mir zu tun? Zugänge zur Tradition in der islamischen Religionspädagogik}},
  editor       = {{Kamcili-Yildiz, Naciye}},
  isbn         = {{ ‎ 978-3119149419}},
  pages        = {{104--116}},
  publisher    = {{de Gruyter}},
  title        = {{{„Ich mache mir die Welt, wie sie mir gefällt.“ Jona und Yūnus in Kinderbibel, Kinderkoran und interreligiösen Lesebüchern }}},
  doi          = {{10.1515/9783111674568-007}},
  volume       = {{3}},
  year         = {{2025}},
}

@inproceedings{65165,
  abstract     = {{Der Beitrag nimmt die Darstellung muslimischer Menschen in evangelischen Religionsbüchern der Jahrgangsstufen 7/8 in den Blick und untersucht sie aus klassismuskritischer Perspektive. Im Zentrum steht die Frage, welche religiösen und sozialen Deutungsmuster in Wort und Bild vermittelt und wie diese didaktisch gerahmt werden. Die Analyse verbindet schulbuchdidaktische und gesellschaftskritische Zugänge, indem sie Karlo Meyers Konzept des „doppelten Individuenrekurses“ mit einem klassismustheoretischen Ansatz nach Markus Gamper und Annett Kupfer verknüpft. Der Beitrag leistet auch eine intersektionale Reflexion im Blick auf eine interreligiöse Religionsdidaktik und mit der Schulbuchforschung verbunden auch einen Beitrag zu einer politischen Religionspädagogik, die mehrheitsgesellschaftliche Stereotype reflektieren lernt.
}},
  author       = {{Kamcili-Yildiz, Naciye and Keuchen, Marion}},
  booktitle    = {{theo web. Zeitschrift für Religionspädagogik. Selig sind die Besitzlosen?!}},
  keywords     = {{Islam, Klassismus, Diskriminierung, Schulbuchforschung, Schulbuch, Migration}},
  location     = {{Augsburg}},
  number       = {{2}},
  pages        = {{139--152}},
  title        = {{{Zwischen Supermarktkasse und Anwaltskanzlei. Eine klassismuskritische Perspektive auf die Darstellung von Muslim:innen in evangelischen Religionsbüchern}}},
  doi          = {{10.58069}},
  volume       = {{24}},
  year         = {{2025}},
}

@inbook{65167,
  abstract     = {{Through the Reformation, the Bible and education gained central importance. The Reformation principle that the Bible as Holy Scripture should be the only basis and norm for faith (sola Scriptura) emphasized the importance of reading and writing. The Reformers wanted children and laypeople to become independent church members. Teaching material was needed for school lessons, and study Bibles with pictures were produced; Martin Luther’s Little Prayer Book (1529) served as a prototype. The Lay Bible (1540) by Wendelin Rihel was a continuation of Luther’s Little Prayer Book. This innovative period laid the foundation for later children’s Bible traditions.
}},
  author       = {{Keuchen, Marion}},
  booktitle    = {{The Oxford Handbook of the Bible and the Reformation}},
  editor       = {{Powell McNutt, Jennifer and Selderhuis, Herman}},
  isbn         = {{ 9780198753186}},
  keywords     = {{Reformation children’s Bibles, Bible illustrations, lay Bible, passional, Martin Luther, Wendelin Rihel, religious education of children}},
  pages        = {{171--185}},
  publisher    = {{Oxford University Press}},
  title        = {{{Children’s Bibles in the Reformation: Martin Luther‘s „Passional“ (1529) and Wendelin Rihel‘s „Leienbibel (1540)}}},
  doi          = {{10.1093/oxfordhb/9780198753186.013.13}},
  year         = {{2025}},
}

@inproceedings{65172,
  abstract     = {{<jats:p>Abstract. The process of joining is used in numerous sectors of the manufacturing industry, where constructions composed of individual components or metal sheets are combined to form complex structures. A straightforward and pervasive approach for joining materials of disparate natures and coated surfaces is clinching. During the clinching process, plastic deformation, residual stresses and damage are introduced into the joint. Due to time-varying service loads cracks can initiate and propagate in the vicinity of the joint which limits the lifetime of the clinched structure. In order to prevent those damage cases, it is crucial to perform fracture mechanical evaluation of cracks in the joint region. Therefore, this publication deals with the question of how plastic deformation, residual stresses and damage need to be considered for the assessment of a crack. For this purpose, simple substitute models are employed to illustrate the principles based on the clinching application example.</jats:p>}},
  author       = {{Weiß, Deborah and Duffe, Tobias and Joy, Tintu David and Kullmer, Gunter}},
  booktitle    = {{Materials Research Proceedings}},
  issn         = {{2474-395X}},
  publisher    = {{Materials Research Forum LLC}},
  title        = {{{Consideration of residual stresses and damage in the fracture mechanical investigation of mechanically joined structures}}},
  doi          = {{10.21741/9781644903551-28}},
  volume       = {{52}},
  year         = {{2025}},
}

@inproceedings{65187,
  author       = {{Keuchen, Marion and Lindemeyer, Sabine}},
  booktitle    = {{Rituale und Spiritualität - auch für religiös ungebundene Menschen}},
  editor       = {{Böhme, Thomas and Kuhlmann, Birgit and Meuche, Katrin and Wenk, Anne-Kathrin and Wittmann-Stasch, Bettina}},
  isbn         = {{978-3-943410-36-5}},
  location     = {{Hamburg}},
  pages        = {{68--79}},
  publisher    = {{Comenius-Institut}},
  title        = {{{Durch Schulseelsorge Demokratiefähigkeit bilden}}},
  volume       = {{11}},
  year         = {{2025}},
}

@inproceedings{61103,
  abstract     = {{Verification planning for engineering complex systems lacks a systematic procedure for creating test scenarios. Test scenarios can be generated by combining test cases, or by integrating test cases into pre-specified scenarios. Based on a systematic literature analysis a method is developed to simplify verification planning by creating new test scenarios and enriching existing ones. To assist the V&V engineer in planning test scenarios, a catalogue of combination premises is created to support the method. The method is evaluated in the development of a platform for emergency management. Evaluation proves that the method makes modelling of test scenarios more efficient.}},
  author       = {{Gräßler, Iris and Ebel, Marcel and Pottebaum, Jens}},
  booktitle    = {{Procedia CIRP}},
  issn         = {{2212-8271}},
  keywords     = {{Systems Engineering, test scenario creation, verification, customer involvement}},
  location     = {{Patras, Greece}},
  pages        = {{213--218}},
  publisher    = {{Elsevier BV}},
  title        = {{{Method for systematic creation of test scenarios for early customer involvement}}},
  doi          = {{https://doi.org/10.1016/j.procir.2025.08.038}},
  volume       = {{136}},
  year         = {{2025}},
}

@inproceedings{62149,
  abstract     = {{The increasing complexity of technical systems requires early, structured verification and validation (V&V). Existing metadata models only map parts of the engineering process and do not enable a continuous chain of effects from requirements to test results. The aim of this publication is to develop a holistic V&V metadata model for the consistent, transparent and machine-processable description and linking of relevant engineering artifacts. In a five-stage research approach, essential model components are derived from literature and are integrated into a holistic model. Initial applications as part of a European research project show the potential of the model for a well-founded effect chain analysis and decision-supporting V&V processes.}},
  author       = {{Gräßler, Iris and Ebel, Marcel}},
  booktitle    = {{DS 140: Proceedings of the 36th Symposium Design for X (DFX2025)}},
  keywords     = {{verification, metadata model, Systems Engineering}},
  location     = {{Hamburg}},
  publisher    = {{The Design Society}},
  title        = {{{Ganzheitliches Metadatenmodel für die Verifikation und Validierung in der Entwicklung komplexer technischer Systeme}}},
  doi          = {{10.35199/dfx2025.09}},
  year         = {{2025}},
}

@inproceedings{65231,
  author       = {{Charalampakis, Konstantinos and Safranoglou, Ioannis and Stavroulakis, Alexis and Ebel, Marcel and Gräßler, Iris and Dimelli, Despina and Mania, Katerina}},
  booktitle    = {{2025 IEEE International Symposium on Mixed and Augmented Reality Adjunct (ISMAR-Adjunct)}},
  publisher    = {{IEEE}},
  title        = {{{Augmented Reality for Navigation, Team Coordination, and Real-Time Data Visualization in Firefighting Operations}}},
  doi          = {{10.1109/ismar-adjunct68609.2025.00041}},
  year         = {{2025}},
}

@article{56131,
  abstract     = {{This article provides a comprehensive mathematical-didactic analysis of how the highly relevant topic symmetry can be prepared for the university education of PSTs. Methodologically, the analysis is embedded in a design research cycle and serves as preparation for the actual design of learning activities. The procedure of "specifying and structuring" learning objects is used and adapted in such a way that, in addition to mathematical aspects, profession-oriented references to school mathematics are also considered. An essential result of the analysis is the formulation of so-called interface aspects to symmetry, which prove to be helpful in establishing such references. }},
  author       = {{Hoffmann, Max}},
  journal      = {{Recherches en Didactique des Mathématiques}},
  number       = {{2}},
  pages        = {{85--120}},
  title        = {{{Symmetry as a Topic for the University Education of Pre-Service Teachers}}},
  doi          = {{10.46298/rdm.14256}},
  volume       = {{45}},
  year         = {{2025}},
}

@inproceedings{65246,
  author       = {{Hoffmann, Max}},
  booktitle    = {{Proceedings of the Fourteenth Congress of the European Society for Research in Mathematics Education (CERME14)}},
  editor       = {{Bosch, Marianna and Bolondi, Giorgio and Carreira, Susana and Gaidoschik, Michael and Spagnolo, Camilla}},
  pages        = {{2245--2252}},
  publisher    = {{Free University of Bozen-Bolzano and ERME}},
  title        = {{{Using scriptwriting as a response format for interface tasks: Exemplary analyses in the context of symmetry}}},
  year         = {{2025}},
}

@inbook{65240,
  author       = {{Petzke, Jonas Dirk Rudolf Helmut and Schmidt, Leon and Kleinschmidt, Dennis and Brüning, Florian}},
  booktitle    = {{International Rubber Conference (IRC) 2025, Bangkok, BITEC; e-abstract book}},
  keywords     = {{distributives Mischen, Extrusion, Kautschuk, Stiftextruder}},
  pages        = {{150–151}},
  title        = {{{Experimental Analysis of the Mixing Behavior of Ethylene-Propylene-Diene Rubber (EPDM) in a Rubber Pin Extruder under Variation of Process Parameters and Mixing Elements}}},
  year         = {{2025}},
}

@inbook{65238,
  author       = {{Damanik, Hogenrich and Fatima, Arooj and Turek, Stefan and Petzke, Jonas Dirk Rudolf Helmut and Kleinschmidt, Dennis and Brüning, Florian}},
  booktitle    = {{International Rubber Conference (IRC) 2025, Bangkok, BITEC; e-abstract book}},
  keywords     = {{CFD simulation, Materialmodellierung, Phan-Thien-Tanner, PTT, Simulation}},
  pages        = {{266–268}},
  title        = {{{Numerical modeling of the non-isothermal viscoelastic flow behavior of rubber compounds based on the PHAN-THİEN-TANNER (PTT) model}}},
  year         = {{2025}},
}

@inbook{65239,
  author       = {{Petzke, Jonas Dirk Rudolf Helmut and Kleinschmidt, Dennis and Brüning, Florian}},
  booktitle    = {{International Rubber Conference (IRC) 2025, Bangkok, BITEC; e-abstract book}},
  keywords     = {{Devulkanisation, Kautschuk, Recycling}},
  pages        = {{185–186}},
  title        = {{{Thermo-Chemical Devulcanization of Sulfur-cured Styrene-Butadiene Rubber (SBR) Using Diphenyldisulfide (DPDS)}}},
  year         = {{2025}},
}

@article{60050,
  abstract     = {{Reputation systems to rate companies’ performances remain largely unexplored inresearch and are scarcely used in business-to-business (B2B) practice. Such systemsare essential for businesses seeking trustworthy partners, as they help reduce infor-mation asymmetry, lower buyers’ transaction risks, and allow high-quality serviceproviders to justify premium pricing. Unlike traditional review-based systems in thebusiness-to-consumer (B2C) context, we propose a B2B reputation mechanism inwhich buyers commit to a rating payment before a transaction. Once the buyer final-izes the rating, this payment is executed and recorded on a blockchain as an immu-table, secure ledger. Our system mimics natural trust-building mechanisms with rat-ings that are (1) monetary-based, (2) stake-based, (3) non-aggregated, (4) involvecounter-ratings, (5) selectively sellable, (6) individually comparable, (7) stored ona blockchain, (8) and monitored by a third instance. This system provides a novelapproach to fostering trust in B2B transactions by reducing information asymme-try and transaction risk. We illustrate the mechanism’s application in the consultingsector. Our analysis has identified 23 institutional trust and distrust dimensions thatpromote establishing institutional trust through the proposed mechanism. Qualita-tive interviews suggest that, while complex and challenging to apply, this mecha-nism can foster trust in B2B transactions. Given the low maturity in the applicationdomain—rating professional business services with business reputation systems—and solution domain—using monetary stakes for ratings, this system stands as apotential invention.}},
  author       = {{Hemmrich, Simon and Nissen, Volker and Beverungen, Daniel and Pauls, Josias Daniel Miño}},
  journal      = {{Information Systems and e-Business Management}},
  keywords     = {{Information asymmetry, Trust, Reputation system, Monetary rating, Blockchain, Consulting}},
  number       = {{1}},
  publisher    = {{Springer}},
  title        = {{{Blockchain‑based reputation systemsfor business‑to‑business services: designing a reputation mechanism to reduce information asymmetry in professional consulting}}},
  doi          = {{https://doi.org/10.1007/s10257-025-00702-9}},
  volume       = {{23}},
  year         = {{2025}},
}

@inbook{65288,
  author       = {{Droß-Krüpe, Kerstin}},
  booktitle    = {{Das achaimenidisch-persische Imperium}},
  editor       = {{Degen, J.}},
  pages        = {{339--347}},
  title        = {{{Frauenbilder und -rollen}}},
  year         = {{2025}},
}

@inbook{65287,
  author       = {{Droß-Krüpe, Kerstin}},
  booktitle    = {{Kriegerinnen im Altertum}},
  editor       = {{Diemke-Horst, J. and Mörtz, T.}},
  pages        = {{67--81}},
  title        = {{{Frauen als Gewalttäterinnen? Erste Überlegungen auf Basis von Petitionen aus dem griechisch-römischen Ägypten}}},
  volume       = {{14}},
  year         = {{2025}},
}

@inbook{65289,
  author       = {{Droß-Krüpe, Kerstin}},
  booktitle    = {{Das achaimenidisch-persische Imperium}},
  editor       = {{Degen, J.}},
  pages        = {{375--381}},
  title        = {{{Atossa}}},
  year         = {{2025}},
}