[{"publication_identifier":{"issn":["0044-2372","1861-8928"]},"author":[{"full_name":"Koch, Reinald","last_name":"Koch","first_name":"Reinald"},{"first_name":"Svea","last_name":"Holtmann","full_name":"Holtmann, Svea"},{"full_name":"Giese, Henning","first_name":"Henning","last_name":"Giese","id":"92812"}],"title":"Losses Never Sleep – The Effect of Tax Loss Offset on Stock Market Returns during Economic Crises","year":"2023","intvolume":" 93","publication_status":"published","date_updated":"2026-04-09T07:41:13Z","language":[{"iso":"eng"}],"main_file_link":[{"open_access":"1"}],"doi":"10.1007/s11573-022-01134-4","issue":"1-2","publication":"Journal of Business Economics","date_created":"2023-07-13T11:19:59Z","department":[{"_id":"187"}],"type":"journal_article","status":"public","publisher":"Springer Science and Business Media LLC","_id":"46042","page":"59-109","volume":93,"user_id":"96670","citation":{"ama":"Koch R, Holtmann S, Giese H. Losses Never Sleep – The Effect of Tax Loss Offset on Stock Market Returns during Economic Crises. Journal of Business Economics. 2023;93(1-2):59-109. doi:10.1007/s11573-022-01134-4","bibtex":"@article{Koch_Holtmann_Giese_2023, title={Losses Never Sleep – The Effect of Tax Loss Offset on Stock Market Returns during Economic Crises}, volume={93}, DOI={10.1007/s11573-022-01134-4}, number={1–2}, journal={Journal of Business Economics}, publisher={Springer Science and Business Media LLC}, author={Koch, Reinald and Holtmann, Svea and Giese, Henning}, year={2023}, pages={59–109} }","mla":"Koch, Reinald, et al. “Losses Never Sleep – The Effect of Tax Loss Offset on Stock Market Returns during Economic Crises.” Journal of Business Economics, vol. 93, no. 1–2, Springer Science and Business Media LLC, 2023, pp. 59–109, doi:10.1007/s11573-022-01134-4.","chicago":"Koch, Reinald, Svea Holtmann, and Henning Giese. “Losses Never Sleep – The Effect of Tax Loss Offset on Stock Market Returns during Economic Crises.” Journal of Business Economics 93, no. 1–2 (2023): 59–109. https://doi.org/10.1007/s11573-022-01134-4.","short":"R. Koch, S. Holtmann, H. Giese, Journal of Business Economics 93 (2023) 59–109.","apa":"Koch, R., Holtmann, S., & Giese, H. (2023). Losses Never Sleep – The Effect of Tax Loss Offset on Stock Market Returns during Economic Crises. Journal of Business Economics, 93(1–2), 59–109. https://doi.org/10.1007/s11573-022-01134-4","ieee":"R. Koch, S. Holtmann, and H. Giese, “Losses Never Sleep – The Effect of Tax Loss Offset on Stock Market Returns during Economic Crises,” Journal of Business Economics, vol. 93, no. 1–2, pp. 59–109, 2023, doi: 10.1007/s11573-022-01134-4."},"quality_controlled":"1","oa":"1"},{"quality_controlled":"1","citation":{"mla":"Fochmann, Martin, et al. “Zusatzkosten der Besteuerung – Eine Analyse des steuerlichen Verwaltungsaufwands und der subjektiv wahrgenommenen Steuerbelastung.” Steuer und Wirtschaft, vol. 100, no. 2, 2023, pp. 171–87.","bibtex":"@article{Fochmann_Heinemann-Heile_Huber_Maiterth_Sureth-Sloane_2023, title={Zusatzkosten der Besteuerung – Eine Analyse des steuerlichen Verwaltungsaufwands und der subjektiv wahrgenommenen Steuerbelastung}, volume={100}, number={2}, journal={Steuer und Wirtschaft}, author={Fochmann, Martin and Heinemann-Heile, Vanessa and Huber, Hans-Peter and Maiterth, Ralf and Sureth-Sloane, Caren}, year={2023}, pages={171–187} }","ama":"Fochmann M, Heinemann-Heile V, Huber H-P, Maiterth R, Sureth-Sloane C. Zusatzkosten der Besteuerung – Eine Analyse des steuerlichen Verwaltungsaufwands und der subjektiv wahrgenommenen Steuerbelastung. Steuer und Wirtschaft. 2023;100(2):171-187.","ieee":"M. Fochmann, V. Heinemann-Heile, H.-P. Huber, R. Maiterth, and C. Sureth-Sloane, “Zusatzkosten der Besteuerung – Eine Analyse des steuerlichen Verwaltungsaufwands und der subjektiv wahrgenommenen Steuerbelastung,” Steuer und Wirtschaft, vol. 100, no. 2, pp. 171–187, 2023.","apa":"Fochmann, M., Heinemann-Heile, V., Huber, H.-P., Maiterth, R., & Sureth-Sloane, C. (2023). Zusatzkosten der Besteuerung – Eine Analyse des steuerlichen Verwaltungsaufwands und der subjektiv wahrgenommenen Steuerbelastung. Steuer und Wirtschaft, 100(2), 171–187.","chicago":"Fochmann, Martin, Vanessa Heinemann-Heile, Hans-Peter Huber, Ralf Maiterth, and Caren Sureth-Sloane. “Zusatzkosten der Besteuerung – Eine Analyse des steuerlichen Verwaltungsaufwands und der subjektiv wahrgenommenen Steuerbelastung.” Steuer und Wirtschaft 100, no. 2 (2023): 171–87.","short":"M. Fochmann, V. Heinemann-Heile, H.-P. Huber, R. Maiterth, C. Sureth-Sloane, Steuer und Wirtschaft 100 (2023) 171–187."},"publication":"Steuer und Wirtschaft","issue":"2","department":[{"_id":"187"}],"type":"journal_article","date_created":"2023-03-09T12:37:55Z","intvolume":" 100","date_updated":"2026-04-09T07:43:33Z","publication_status":"published","author":[{"first_name":"Martin","last_name":"Fochmann","full_name":"Fochmann, Martin"},{"id":"83380","full_name":"Heinemann-Heile, Vanessa","first_name":"Vanessa","last_name":"Heinemann-Heile"},{"first_name":"Hans-Peter","last_name":"Huber","full_name":"Huber, Hans-Peter"},{"first_name":"Ralf","last_name":"Maiterth","full_name":"Maiterth, Ralf"},{"id":"530","orcid":" 0000-0002-8183-5901","last_name":"Sureth-Sloane","first_name":"Caren","full_name":"Sureth-Sloane, Caren"}],"title":"Zusatzkosten der Besteuerung – Eine Analyse des steuerlichen Verwaltungsaufwands und der subjektiv wahrgenommenen Steuerbelastung","year":"2023","status":"public","volume":100,"user_id":"96670","language":[{"iso":"ger"}],"_id":"42897","page":"171-187"},{"quality_controlled":"1","citation":{"mla":"Greil, Stefan, et al. “Towards an Amended Arm´s Length Principle - Tackling Complexity and Implementing Destination Rules in Transfer Pricing.” Intertax, vol. 51, no. 4, 2023, pp. 272–89.","bibtex":"@article{Greil_Overesch_Rohlfing-Bastian_Schreiber_Sureth-Sloane_2023, title={Towards an Amended Arm´s Length Principle - Tackling Complexity and Implementing Destination Rules in Transfer Pricing}, volume={51}, number={4}, journal={Intertax}, author={Greil, Stefan and Overesch, Michael and Rohlfing-Bastian, Anna and Schreiber, Ulrich and Sureth-Sloane, Caren}, year={2023}, pages={272–289} }","ama":"Greil S, Overesch M, Rohlfing-Bastian A, Schreiber U, Sureth-Sloane C. Towards an Amended Arm´s Length Principle - Tackling Complexity and Implementing Destination Rules in Transfer Pricing. Intertax. 2023;51(4):272-289.","ieee":"S. Greil, M. Overesch, A. Rohlfing-Bastian, U. Schreiber, and C. Sureth-Sloane, “Towards an Amended Arm´s Length Principle - Tackling Complexity and Implementing Destination Rules in Transfer Pricing,” Intertax, vol. 51, no. 4, pp. 272–289, 2023.","apa":"Greil, S., Overesch, M., Rohlfing-Bastian, A., Schreiber, U., & Sureth-Sloane, C. (2023). Towards an Amended Arm´s Length Principle - Tackling Complexity and Implementing Destination Rules in Transfer Pricing. Intertax, 51(4), 272–289.","short":"S. Greil, M. Overesch, A. Rohlfing-Bastian, U. Schreiber, C. Sureth-Sloane, Intertax 51 (2023) 272–289.","chicago":"Greil, Stefan, Michael Overesch, Anna Rohlfing-Bastian, Ulrich Schreiber, and Caren Sureth-Sloane. “Towards an Amended Arm´s Length Principle - Tackling Complexity and Implementing Destination Rules in Transfer Pricing.” Intertax 51, no. 4 (2023): 272–89."},"issue":"4","publication":"Intertax","department":[{"_id":"187"}],"type":"journal_article","date_created":"2023-02-28T10:34:17Z","intvolume":" 51","date_updated":"2026-04-09T07:43:52Z","publication_status":"published","author":[{"first_name":"Stefan","last_name":"Greil","full_name":"Greil, Stefan"},{"full_name":"Overesch, Michael","first_name":"Michael","last_name":"Overesch"},{"full_name":"Rohlfing-Bastian, Anna","first_name":"Anna","last_name":"Rohlfing-Bastian"},{"full_name":"Schreiber, Ulrich","last_name":"Schreiber","first_name":"Ulrich"},{"id":"530","last_name":"Sureth-Sloane","orcid":" 0000-0002-8183-5901","first_name":"Caren","full_name":"Sureth-Sloane, Caren"}],"title":"Towards an Amended Arm´s Length Principle - Tackling Complexity and Implementing Destination Rules in Transfer Pricing","status":"public","year":"2023","volume":51,"user_id":"96670","language":[{"iso":"eng"}],"_id":"42635","page":"272-289"},{"_id":"46483","publisher":"MDPI AG","user_id":"7850","volume":7,"status":"public","citation":{"chicago":"Borgert, Thomas, Maximilian Henke, and Werner Homberg. “Investigations on the Influences of the Thermomechanical Manufacturing of Aluminium Auxiliary Joining Elements.” Journal of Manufacturing and Materials Processing 7, no. 4 (2023). https://doi.org/10.3390/jmmp7040147.","short":"T. Borgert, M. Henke, W. Homberg, Journal of Manufacturing and Materials Processing 7 (2023).","apa":"Borgert, T., Henke, M., & Homberg, W. (2023). Investigations on the Influences of the Thermomechanical Manufacturing of Aluminium Auxiliary Joining Elements. Journal of Manufacturing and Materials Processing, 7(4), Article 147. https://doi.org/10.3390/jmmp7040147","ieee":"T. Borgert, M. Henke, and W. Homberg, “Investigations on the Influences of the Thermomechanical Manufacturing of Aluminium Auxiliary Joining Elements,” Journal of Manufacturing and Materials Processing, vol. 7, no. 4, Art. no. 147, 2023, doi: 10.3390/jmmp7040147.","ama":"Borgert T, Henke M, Homberg W. Investigations on the Influences of the Thermomechanical Manufacturing of Aluminium Auxiliary Joining Elements. Journal of Manufacturing and Materials Processing. 2023;7(4). doi:10.3390/jmmp7040147","bibtex":"@article{Borgert_Henke_Homberg_2023, title={Investigations on the Influences of the Thermomechanical Manufacturing of Aluminium Auxiliary Joining Elements}, volume={7}, DOI={10.3390/jmmp7040147}, number={4147}, journal={Journal of Manufacturing and Materials Processing}, publisher={MDPI AG}, author={Borgert, Thomas and Henke, Maximilian and Homberg, Werner}, year={2023} }","mla":"Borgert, Thomas, et al. “Investigations on the Influences of the Thermomechanical Manufacturing of Aluminium Auxiliary Joining Elements.” Journal of Manufacturing and Materials Processing, vol. 7, no. 4, 147, MDPI AG, 2023, doi:10.3390/jmmp7040147."},"quality_controlled":"1","project":[{"_id":"147","name":"TRR 285 – C03: TRR 285 - Subproject C03"},{"_id":"133","name":"TRR 285 - Project Area C"},{"name":"TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten","_id":"130"}],"article_number":"147","language":[{"iso":"eng"}],"doi":"10.3390/jmmp7040147","title":"Investigations on the Influences of the Thermomechanical Manufacturing of Aluminium Auxiliary Joining Elements","year":"2023","author":[{"id":"83141","full_name":"Borgert, Thomas","last_name":"Borgert","first_name":"Thomas"},{"full_name":"Henke, Maximilian","last_name":"Henke","first_name":"Maximilian"},{"id":"233","first_name":"Werner","last_name":"Homberg","full_name":"Homberg, Werner"}],"publication_identifier":{"issn":["2504-4494"]},"publication_status":"published","date_updated":"2026-05-12T11:59:08Z","article_type":"original","intvolume":" 7","date_created":"2023-08-14T06:42:25Z","keyword":["Industrial and Manufacturing Engineering","Mechanical Engineering","Mechanics of Materials"],"type":"journal_article","department":[{"_id":"156"}],"publication":"Journal of Manufacturing and Materials Processing","issue":"4","abstract":[{"text":"The demands on joining technology are constantly increasing due to the consistent lightweight construction and the associated increasing material mix. To meet these requirements, the adaptability of the joining processes must be improved to be able to process different material combinations and to react to challenges caused by deviations in the process chain. One example of a highly adaptable process due to the two-step process sequence is thermomechanical joining with Friction Spun Joint Connectors (FSJCs) that can be individually adapted to the joint. In this paper, the potentials of the adaption in the two-stage joining process with aluminium auxiliary joining elements are investigated. To this end, it is first investigated whether a thermomechanical forming process can be used to achieve a uniform and controlled manufacturing regarding the process variable of the temperature as well as the geometry of the FSJC. Based on the successful proof of the high and good repeatability in the FSJC manufacturing, possibilities, and potentials for the targeted influencing of the process and FSJC geometry are shown, based on an extensive variation of the process input variables (delivery condition and thus mechanical properties of the raw parts as well as the process parameters of rotational speed and feed rate). Here it can be shown that above all, the feed rate of the final forming process has the strongest influence on the process and thus also offers the strongest possibilities for influencing it.","lang":"eng"}]},{"place":"Cham","citation":{"apa":"Borgert, T., & Homberg, W. (2023). Friction-Induced Recycled Aluminium Semi-finished Products in Thermo-mechanical Joining Technology. In Lecture Notes in Mechanical Engineering. Springer Nature Switzerland. https://doi.org/10.1007/978-3-031-41341-4_1","ieee":"T. Borgert and W. Homberg, “Friction-Induced Recycled Aluminium Semi-finished Products in Thermo-mechanical Joining Technology,” in Lecture Notes in Mechanical Engineering, Cham: Springer Nature Switzerland, 2023.","short":"T. Borgert, W. Homberg, in: Lecture Notes in Mechanical Engineering, Springer Nature Switzerland, Cham, 2023.","chicago":"Borgert, Thomas, and Werner Homberg. “Friction-Induced Recycled Aluminium Semi-Finished Products in Thermo-Mechanical Joining Technology.” In Lecture Notes in Mechanical Engineering. Cham: Springer Nature Switzerland, 2023. https://doi.org/10.1007/978-3-031-41341-4_1.","mla":"Borgert, Thomas, and Werner Homberg. “Friction-Induced Recycled Aluminium Semi-Finished Products in Thermo-Mechanical Joining Technology.” Lecture Notes in Mechanical Engineering, Springer Nature Switzerland, 2023, doi:10.1007/978-3-031-41341-4_1.","ama":"Borgert T, Homberg W. Friction-Induced Recycled Aluminium Semi-finished Products in Thermo-mechanical Joining Technology. In: Lecture Notes in Mechanical Engineering. Springer Nature Switzerland; 2023. doi:10.1007/978-3-031-41341-4_1","bibtex":"@inbook{Borgert_Homberg_2023, place={Cham}, title={Friction-Induced Recycled Aluminium Semi-finished Products in Thermo-mechanical Joining Technology}, DOI={10.1007/978-3-031-41341-4_1}, booktitle={Lecture Notes in Mechanical Engineering}, publisher={Springer Nature Switzerland}, author={Borgert, Thomas and Homberg, Werner}, year={2023} }"},"project":[{"name":"TRR 285 – C03: TRR 285 - Subproject C03","_id":"147"},{"_id":"133","name":"TRR 285 - Project Area C"},{"name":"TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten","_id":"130"}],"quality_controlled":"1","publisher":"Springer Nature Switzerland","_id":"46752","user_id":"7850","status":"public","date_created":"2023-08-29T06:52:56Z","department":[{"_id":"156"}],"type":"book_chapter","publication":"Lecture Notes in Mechanical Engineering","abstract":[{"lang":"eng","text":"Due to current global challenges regarding energy security as well as climate change the importance of preserving the nature and all available resources is steadily increasing. In order to achieve the energy-saving and climate targets, it is not only necessary to develop new processes and processing possibilities, but also to optimise known process chains with regard to energy and resource efficiency in the area of production technology. Here, the recycling of supposed production waste represents an opportunity to save energy. In addition to the conventional and smelting metallurgical recycling process, extensive research activities have therefore been carried out for alternative solid-state recycling processes. One example is the friction-induced recycling process, which has been used in past studies to demonstrate the energy- and resource-efficient production of semi-finished products from aluminium scrap such as chips. In addition, properties like chemical composition and strength can be adjusted locally and in terms of processing time. This can be used to improve the versatility of further processing steps."}],"language":[{"iso":"eng"}],"doi":"10.1007/978-3-031-41341-4_1","author":[{"id":"83141","full_name":"Borgert, Thomas","first_name":"Thomas","last_name":"Borgert"},{"id":"233","first_name":"Werner","last_name":"Homberg","full_name":"Homberg, Werner"}],"publication_identifier":{"isbn":["9783031413407","9783031413414"],"issn":["2195-4356","2195-4364"]},"title":"Friction-Induced Recycled Aluminium Semi-finished Products in Thermo-mechanical Joining Technology","year":"2023","date_updated":"2026-05-12T11:58:00Z","publication_status":"published"},{"date_created":"2023-10-02T06:46:53Z","department":[{"_id":"156"},{"_id":"158"}],"type":"journal_article","keyword":["Industrial and Manufacturing Engineering","Mechanical Engineering","Mechanics of Materials"],"publication":"Journal of Manufacturing and Materials Processing","issue":"5","abstract":[{"text":"Consistent lightweight construction in the area of vehicle manufacturing requires the increased use of multi-material combinations. This, in turn, requires an adaptation of standard joining techniques. In multi-material combinations, the importance of integral cast components, in particular, is increasing and poses additional technical challenges for the industry. One approach to solve these challenges is adaptable joining elements manufactured by a thermomechanical forming process. By applying an incremental and thermomechanical joining process, it is possible to react immediately and adapt the joining process inline to reduce the number of different joining elements. In the investigation described in this publication, cast plates made of the cast aluminium alloy EN AC-AlSi9 serve as joining partners, which are processed by sand casting. The joining process of hypoeutectic AlSi alloys is challenging as their brittle character leads to cracks in the joint during conventional mechanical joining. To solve this, the frictional heat of the novel joining process applied can provide a finer microstructure in the hypoeutectic AlSi9 cast alloy. In detail, its Si is finer-grained, resulting in higher ductility of the joint. This study reveals the thermomechanical joining suitability of a hypoeutectic cast aluminium alloy in combination with adaptively manufactured auxiliary joining elements.","lang":"eng"}],"language":[{"iso":"eng"}],"article_number":"169","doi":"10.3390/jmmp7050169","author":[{"id":"83141","full_name":"Borgert, Thomas","first_name":"Thomas","last_name":"Borgert"},{"id":"32340","full_name":"Neuser, Moritz","last_name":"Neuser","first_name":"Moritz"},{"id":"48411","full_name":"Hoyer, Kay-Peter","last_name":"Hoyer","first_name":"Kay-Peter"},{"id":"233","first_name":"Werner","last_name":"Homberg","full_name":"Homberg, Werner"},{"id":"43720","first_name":"Mirko","last_name":"Schaper","full_name":"Schaper, Mirko"}],"publication_identifier":{"issn":["2504-4494"]},"title":"Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates","year":"2023","intvolume":" 7","article_type":"original","date_updated":"2026-05-12T12:00:54Z","publication_status":"published","citation":{"ieee":"T. Borgert, M. Neuser, K.-P. Hoyer, W. Homberg, and M. Schaper, “Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates,” Journal of Manufacturing and Materials Processing, vol. 7, no. 5, Art. no. 169, 2023, doi: 10.3390/jmmp7050169.","apa":"Borgert, T., Neuser, M., Hoyer, K.-P., Homberg, W., & Schaper, M. (2023). Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates. Journal of Manufacturing and Materials Processing, 7(5), Article 169. https://doi.org/10.3390/jmmp7050169","chicago":"Borgert, Thomas, Moritz Neuser, Kay-Peter Hoyer, Werner Homberg, and Mirko Schaper. “Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates.” Journal of Manufacturing and Materials Processing 7, no. 5 (2023). https://doi.org/10.3390/jmmp7050169.","short":"T. Borgert, M. Neuser, K.-P. Hoyer, W. Homberg, M. Schaper, Journal of Manufacturing and Materials Processing 7 (2023).","mla":"Borgert, Thomas, et al. “Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates.” Journal of Manufacturing and Materials Processing, vol. 7, no. 5, 169, MDPI AG, 2023, doi:10.3390/jmmp7050169.","bibtex":"@article{Borgert_Neuser_Hoyer_Homberg_Schaper_2023, title={Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates}, volume={7}, DOI={10.3390/jmmp7050169}, number={5169}, journal={Journal of Manufacturing and Materials Processing}, publisher={MDPI AG}, author={Borgert, Thomas and Neuser, Moritz and Hoyer, Kay-Peter and Homberg, Werner and Schaper, Mirko}, year={2023} }","ama":"Borgert T, Neuser M, Hoyer K-P, Homberg W, Schaper M. Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates. Journal of Manufacturing and Materials Processing. 2023;7(5). doi:10.3390/jmmp7050169"},"project":[{"_id":"147","name":"TRR 285 – C03: TRR 285 - Subproject C03"},{"_id":"136","name":"TRR 285 – A02: TRR 285 - Subproject A02"},{"_id":"133","name":"TRR 285 - Project Area C"},{"name":"TRR 285 - Project Area A","_id":"131"},{"name":"TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten","_id":"130"}],"quality_controlled":"1","_id":"47535","publisher":"MDPI AG","volume":7,"user_id":"7850","status":"public"},{"language":[{"iso":"ger"}],"publication_identifier":{"isbn":["978-3-88355-430-3"]},"corporate_editor":["DGM - Deutsche Gesellschaft für Materialkunde e.V. "],"author":[{"first_name":"Gregor","last_name":"Reschke","full_name":"Reschke, Gregor","id":"98812"},{"full_name":"Kalich, Jan","last_name":"Kalich","first_name":"Jan"},{"first_name":"Uwe","last_name":"Füssel","full_name":"Füssel, Uwe"}],"year":"2023","title":"Methoden zur Charakterisierung der Bindemechanismen bei geclinchten elektrischen Kontakten","date_updated":"2026-05-12T13:36:29Z","publication_status":"published","date_created":"2025-07-18T11:10:04Z","department":[{"_id":"630"}],"type":"conference","keyword":["Clinchen","Bindemechanismen","elektrische Eigenschaften","Aluminium","Kurzzeitbestromung"],"publication":"Tagung Werkstoffprüfung 2022: Werkstoffe und Bauteile auf dem Prüfstand, Prüftechnik – Kennwertermittlung – Schadensvermeidung","abstract":[{"text":"Das umformtechnische Fügeverfahren Clinchen ermöglicht ein energiearmes Fügen von Blechen und dient traditionell der Übertragung mechanischer Kräfte. Neue Einsatzgebiete erfordern eine elektrische oder thermische Leitfähigkeit, sodass es notwendig ist, das Clinchen entsprechend zu qualifizieren. Es wurden Untersuchungen an Aluminiumverbindungen durchgeführt, welche mit hohen Kurzzeitströmen belastet wurden. Der Einfluss verschiedener Oberflächenvorbehandlungen wurde betrachtet. Als Charakterisierungsmethode für die Bauteile und die geclinchten Fügeverbindungen wird die Messung des elektrischen Widerstandes herangezogen. Die untersuchten Clinchverbindungen sind fähig, die im Fehlerfall auftretenden Kurzzeitströme zu übertragen. Der Oberflächenzustand übt dabei einen signifikanten Einfluss auf die Clinchpunktausbildung und damit auf deren elektrische Eigenschaften aus. Durch Messung des elektrischen Widerstandes vor und nach dem Fügen sowie nach einer Bestromung mit Fehlerströmen, kann das Kontaktverhalten qualifiziert werden.","lang":"ger"}],"extern":"1","_id":"60647","page":"374-379","editor":[{"first_name":"Martina","last_name":"Zimmermann","full_name":"Zimmermann, Martina"}],"user_id":"7850","conference":{"name":"Tagung Werkstoffprüfung 2022","start_date":"2022-10-27","location":"Dresden","end_date":"2022-10-28"},"status":"public","place":"Sankt Augustin","citation":{"ieee":"G. Reschke, J. Kalich, and U. Füssel, “Methoden zur Charakterisierung der Bindemechanismen bei geclinchten elektrischen Kontakten,” in Tagung Werkstoffprüfung 2022: Werkstoffe und Bauteile auf dem Prüfstand, Prüftechnik – Kennwertermittlung – Schadensvermeidung, Dresden, 2023, pp. 374–379.","apa":"Reschke, G., Kalich, J., & Füssel, U. (2023). Methoden zur Charakterisierung der Bindemechanismen bei geclinchten elektrischen Kontakten. In M. Zimmermann & DGM - Deutsche Gesellschaft für Materialkunde e.V. (Eds.), Tagung Werkstoffprüfung 2022: Werkstoffe und Bauteile auf dem Prüfstand, Prüftechnik – Kennwertermittlung – Schadensvermeidung (pp. 374–379).","short":"G. Reschke, J. Kalich, U. Füssel, in: M. Zimmermann, DGM - Deutsche Gesellschaft für Materialkunde e.V. (Eds.), Tagung Werkstoffprüfung 2022: Werkstoffe und Bauteile auf dem Prüfstand, Prüftechnik – Kennwertermittlung – Schadensvermeidung, Sankt Augustin, 2023, pp. 374–379.","chicago":"Reschke, Gregor, Jan Kalich, and Uwe Füssel. “Methoden zur Charakterisierung der Bindemechanismen bei geclinchten elektrischen Kontakten.” In Tagung Werkstoffprüfung 2022: Werkstoffe und Bauteile auf dem Prüfstand, Prüftechnik – Kennwertermittlung – Schadensvermeidung, edited by Martina Zimmermann and DGM - Deutsche Gesellschaft für Materialkunde e.V. , 374–79. Sankt Augustin, 2023.","mla":"Reschke, Gregor, et al. “Methoden zur Charakterisierung der Bindemechanismen bei geclinchten elektrischen Kontakten.” Tagung Werkstoffprüfung 2022: Werkstoffe und Bauteile auf dem Prüfstand, Prüftechnik – Kennwertermittlung – Schadensvermeidung, edited by Martina Zimmermann and DGM - Deutsche Gesellschaft für Materialkunde e.V. , 2023, pp. 374–79.","bibtex":"@inproceedings{Reschke_Kalich_Füssel_2023, place={Sankt Augustin}, title={Methoden zur Charakterisierung der Bindemechanismen bei geclinchten elektrischen Kontakten}, booktitle={Tagung Werkstoffprüfung 2022: Werkstoffe und Bauteile auf dem Prüfstand, Prüftechnik – Kennwertermittlung – Schadensvermeidung}, author={Reschke, Gregor and Kalich, Jan and Füssel, Uwe}, editor={Zimmermann, Martina and DGM - Deutsche Gesellschaft für Materialkunde e.V. }, year={2023}, pages={374–379} }","ama":"Reschke G, Kalich J, Füssel U. Methoden zur Charakterisierung der Bindemechanismen bei geclinchten elektrischen Kontakten. In: Zimmermann M, DGM - Deutsche Gesellschaft für Materialkunde e.V. , eds. Tagung Werkstoffprüfung 2022: Werkstoffe und Bauteile auf dem Prüfstand, Prüftechnik – Kennwertermittlung – Schadensvermeidung. ; 2023:374-379."},"project":[{"name":"TRR 285 - A: TRR 285 - Project Area A","_id":"131"},{"_id":"138","name":"TRR 285 – A04: TRR 285 - Subproject A04"},{"name":"TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten","_id":"130"}],"quality_controlled":"1"},{"citation":{"mla":"Bielak, Christian Roman, et al. “Numerical Analysis of Failure Modeling in Clinching Process Chain Simulation.” Materials Research Proceedings, Materials Research Forum LLC, 2023, doi:10.21741/9781644902417-33.","ama":"Bielak CR, Böhnke M, Friedlein J, et al. Numerical analysis of failure modeling in clinching process chain simulation. In: Materials Research Proceedings. Materials Research Forum LLC; 2023. doi:10.21741/9781644902417-33","bibtex":"@inproceedings{Bielak_Böhnke_Friedlein_Bobbert_Mergheim_Steinmann_Meschut_2023, title={Numerical analysis of failure modeling in clinching process chain simulation}, DOI={10.21741/9781644902417-33}, booktitle={Materials Research Proceedings}, publisher={Materials Research Forum LLC}, author={Bielak, Christian Roman and Böhnke, Max and Friedlein, Johannes and Bobbert, Mathias and Mergheim, Julia and Steinmann, Paul and Meschut, Gerson}, year={2023} }","apa":"Bielak, C. R., Böhnke, M., Friedlein, J., Bobbert, M., Mergheim, J., Steinmann, P., & Meschut, G. (2023). Numerical analysis of failure modeling in clinching process chain simulation. Materials Research Proceedings. SHEMET 2023. https://doi.org/10.21741/9781644902417-33","ieee":"C. R. Bielak et al., “Numerical analysis of failure modeling in clinching process chain simulation,” presented at the SHEMET 2023, 2023, doi: 10.21741/9781644902417-33.","short":"C.R. Bielak, M. Böhnke, J. Friedlein, M. Bobbert, J. Mergheim, P. Steinmann, G. Meschut, in: Materials Research Proceedings, Materials Research Forum LLC, 2023.","chicago":"Bielak, Christian Roman, Max Böhnke, Johannes Friedlein, Mathias Bobbert, Julia Mergheim, Paul Steinmann, and Gerson Meschut. “Numerical Analysis of Failure Modeling in Clinching Process Chain Simulation.” In Materials Research Proceedings. Materials Research Forum LLC, 2023. https://doi.org/10.21741/9781644902417-33."},"project":[{"_id":"131","name":"TRR 285 - A: TRR 285 - Project Area A"},{"name":"TRR 285 – A01: TRR 285 - Subproject A01","_id":"135"},{"_id":"139","name":"TRR 285 – A05: TRR 285 - Subproject A05"},{"_id":"130","name":"TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten"}],"quality_controlled":"1","conference":{"name":"SHEMET 2023"},"status":"public","_id":"43090","publisher":"Materials Research Forum LLC","user_id":"7850","publication":"Materials Research Proceedings","abstract":[{"text":"The application of the mechanical joining process clinching allows the assembly of different sheet metal materials with a wide range of material thickness configurations, which is of interest for lightweight multi-material structures. In order to be able to predict the clinched joint properties as a function of the individual manufacturing steps, current studies focus on numerical modeling of the entire clinching process chain. It is essential to be able to take into account the influence of the joining process-induced damage on the load-bearing capacity of the joint during the loading phase. This study presents a numerical damage accumulation in the clinching process based on an implemented Hosford-Coulomb failure model using a 3D clinching process model applied on the aluminum alloy EN AW-6014 in temper T4. A correspondence of the experimentally determined failure location with the element of the highest numerically determined damage accumulation is shown. Moreover, the experimentally determined failure behavior is predicted to be in agreement in the numerical loading simulation with transferred pre-damage from the process simulation. ","lang":"eng"}],"date_created":"2023-03-23T08:13:30Z","department":[{"_id":"157"}],"type":"conference","publication_identifier":{"issn":["2474-395X"]},"author":[{"first_name":"Christian Roman","last_name":"Bielak","full_name":"Bielak, Christian Roman","id":"34782"},{"first_name":"Max","last_name":"Böhnke","full_name":"Böhnke, Max","id":"45779"},{"full_name":"Friedlein, Johannes","first_name":"Johannes","last_name":"Friedlein"},{"id":"7850","full_name":"Bobbert, Mathias","last_name":"Bobbert","first_name":"Mathias"},{"last_name":"Mergheim","first_name":"Julia","full_name":"Mergheim, Julia"},{"last_name":"Steinmann","first_name":"Paul","full_name":"Steinmann, Paul"},{"last_name":"Meschut","first_name":"Gerson","orcid":"0000-0002-2763-1246","full_name":"Meschut, Gerson","id":"32056"}],"year":"2023","title":"Numerical analysis of failure modeling in clinching process chain simulation","publication_status":"published","date_updated":"2026-05-12T13:27:10Z","language":[{"iso":"eng"}],"doi":"10.21741/9781644902417-33"},{"status":"public","conference":{"location":"Nürnberg","name":"20th International Conference on Sheet Metal","start_date":"02.04.2023","end_date":"05.04.2023"},"page":"187-194","publisher":"Materials Research Forum LLC","_id":"43031","user_id":"7850","volume":25,"citation":{"ieee":"T. Borgert, M. Neuser, E. Wiens, O. Grydin, W. Homberg, and M. Schaper, “Influence of thermo-mechanical joining process on the microstructure of a hypoeutectic aluminium cast alloy,” in Materials Research Proceedings, Nürnberg, 2023, vol. 25, pp. 187–194, doi: 10.21741/9781644902417-24.","apa":"Borgert, T., Neuser, M., Wiens, E., Grydin, O., Homberg, W., & Schaper, M. (2023). Influence of thermo-mechanical joining process on the microstructure of a hypoeutectic aluminium cast alloy. Materials Research Proceedings, 25, 187–194. https://doi.org/10.21741/9781644902417-24","chicago":"Borgert, Thomas, Moritz Neuser, Eugen Wiens, Olexandr Grydin, Werner Homberg, and Mirko Schaper. “Influence of Thermo-Mechanical Joining Process on the Microstructure of a Hypoeutectic Aluminium Cast Alloy.” In Materials Research Proceedings, 25:187–94. Materials Research Forum LLC, 2023. https://doi.org/10.21741/9781644902417-24.","short":"T. Borgert, M. Neuser, E. Wiens, O. Grydin, W. Homberg, M. Schaper, in: Materials Research Proceedings, Materials Research Forum LLC, 2023, pp. 187–194.","mla":"Borgert, Thomas, et al. “Influence of Thermo-Mechanical Joining Process on the Microstructure of a Hypoeutectic Aluminium Cast Alloy.” Materials Research Proceedings, vol. 25, Materials Research Forum LLC, 2023, pp. 187–94, doi:10.21741/9781644902417-24.","bibtex":"@inproceedings{Borgert_Neuser_Wiens_Grydin_Homberg_Schaper_2023, title={Influence of thermo-mechanical joining process on the microstructure of a hypoeutectic aluminium cast alloy}, volume={25}, DOI={10.21741/9781644902417-24}, booktitle={Materials Research Proceedings}, publisher={Materials Research Forum LLC}, author={Borgert, Thomas and Neuser, Moritz and Wiens, Eugen and Grydin, Olexandr and Homberg, Werner and Schaper, Mirko}, year={2023}, pages={187–194} }","ama":"Borgert T, Neuser M, Wiens E, Grydin O, Homberg W, Schaper M. Influence of thermo-mechanical joining process on the microstructure of a hypoeutectic aluminium cast alloy. In: Materials Research Proceedings. Vol 25. Materials Research Forum LLC; 2023:187-194. doi:10.21741/9781644902417-24"},"quality_controlled":"1","project":[{"_id":"147","name":"TRR 285 – C03: TRR 285 - Subproject C03"},{"_id":"136","name":"TRR 285 – A02: TRR 285 - Subproject A02"},{"_id":"133","name":"TRR 285 - Project Area C"},{"name":"TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten","_id":"130"},{"_id":"131","name":"TRR 285 - Project Area A"}],"title":"Influence of thermo-mechanical joining process on the microstructure of a hypoeutectic aluminium cast alloy","year":"2023","publication_identifier":{"issn":["2474-395X"]},"author":[{"first_name":"Thomas","last_name":"Borgert","full_name":"Borgert, Thomas","id":"83141"},{"full_name":"Neuser, Moritz","last_name":"Neuser","first_name":"Moritz","id":"32340"},{"id":"7888","first_name":"Eugen","last_name":"Wiens","full_name":"Wiens, Eugen"},{"id":"43822","first_name":"Olexandr","last_name":"Grydin","full_name":"Grydin, Olexandr"},{"id":"233","first_name":"Werner","last_name":"Homberg","full_name":"Homberg, Werner"},{"full_name":"Schaper, Mirko","last_name":"Schaper","first_name":"Mirko","id":"43720"}],"publication_status":"published","date_updated":"2026-05-12T13:53:46Z","intvolume":" 25","language":[{"iso":"eng"}],"doi":"10.21741/9781644902417-24","publication":"Materials Research Proceedings","abstract":[{"lang":"eng","text":"Requirements of multi-material construction involve adjustments to standard joining techniques. Especially the growing importance of integral cast components poses additional engineering challenges for the industry. One approach to achieve these goals are adaptable joining elements formed by friction spinning. This approach uses friction-induced heat to form customisable joining elements to join sheets for different boundary conditions, even for brittle cast materials. It is possible to react immediately to adapt to the joining process inline and reduce the amount of different joining elements. As the joining partner serve casting plates of the aluminium casting alloy EN AC–AlSi9, which is processed in the sand casting. Joining hypoeutectic AlSi alloys constitutes a challenge because the brittle character of these cause cracks in the joint during conventional mechanical joining. Furthermore, the friction-induced heat of the novel joining process causes a finer microstructure in the hypoeutectic AlSi9 casting alloy. In particular, the eutectic Si is more fine-grained, resulting in higher joint ductility. This study indicates the joining suitability of a hypoeutectic aluminium casting alloy in combination with adaptive manufactured additional joining elements. Here, various mechanical and microstructural investigations validate the influence of the thermomechanical joining technique. In conclusion, the potential of this joining process is presented regarding the joinability of cast aluminium components."}],"date_created":"2023-03-16T14:59:01Z","type":"conference","department":[{"_id":"156"},{"_id":"158"}]},{"citation":{"bibtex":"@article{Neuser_Schaper_Grydin_2023, title={Mechanical and Microstructure Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll Casting Process}, volume={7}, DOI={10.3390/jmmp7040132}, number={4132}, journal={Journal of Manufacturing and Materials Processing}, publisher={MDPI AG}, author={Neuser, Moritz and Schaper, Mirko and Grydin, Olexandr}, year={2023} }","ama":"Neuser M, Schaper M, Grydin O. Mechanical and Microstructure Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll Casting Process. Journal of Manufacturing and Materials Processing. 2023;7(4). doi:10.3390/jmmp7040132","mla":"Neuser, Moritz, et al. “Mechanical and Microstructure Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll Casting Process.” Journal of Manufacturing and Materials Processing, vol. 7, no. 4, 132, MDPI AG, 2023, doi:10.3390/jmmp7040132.","chicago":"Neuser, Moritz, Mirko Schaper, and Olexandr Grydin. “Mechanical and Microstructure Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll Casting Process.” Journal of Manufacturing and Materials Processing 7, no. 4 (2023). https://doi.org/10.3390/jmmp7040132.","short":"M. Neuser, M. Schaper, O. Grydin, Journal of Manufacturing and Materials Processing 7 (2023).","ieee":"M. Neuser, M. Schaper, and O. Grydin, “Mechanical and Microstructure Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll Casting Process,” Journal of Manufacturing and Materials Processing, vol. 7, no. 4, Art. no. 132, 2023, doi: 10.3390/jmmp7040132.","apa":"Neuser, M., Schaper, M., & Grydin, O. (2023). Mechanical and Microstructure Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll Casting Process. Journal of Manufacturing and Materials Processing, 7(4), Article 132. https://doi.org/10.3390/jmmp7040132"},"project":[{"name":"TRR 285 – A02: TRR 285 - Subproject A02","_id":"136"},{"_id":"131","name":"TRR 285 - Project Area A"},{"_id":"130","name":"TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten"}],"quality_controlled":"1","_id":"52405","publisher":"MDPI AG","volume":7,"user_id":"7850","status":"public","date_created":"2024-03-08T16:09:27Z","department":[{"_id":"158"}],"keyword":["Industrial and Manufacturing Engineering","Mechanical Engineering","Mechanics of Materials"],"type":"journal_article","publication":"Journal of Manufacturing and Materials Processing","issue":"4","abstract":[{"text":"Multi-material designs (MMD) are more frequently used in the automotive industry. Hereby, the combination of different materials, metal sheets, or cast components, is mechanically joined, often by forming joining processes. The cast components mostly used are high-strength, age-hardenable aluminium alloys of the Al–Si system. Here, the low ductility of the AlSi alloys constitutes a challenge because their brittle nature causes cracks during the joining process. However, by using suitable solidification conditions, it is possible to achieve a microstructure with improved mechanical and joining properties. For this study, we used the twin-roll casting process (TRC) with water-cooled rollers to manufacture the hypoeutectic AlSi10Mg for the first time. Hereby, high solidification rates are realisable, which introduces a microstructure that is about four times finer than in the sand casting process. In particular, it is shown that a fine microstructure close to the modification with Na or Sr is achieved by the high solidification rate in the TRC process without using these elements. Based on this, the mechanical properties increase, and especially the ductility is enhanced. Subsequent joining investigations validate the positive influence of a high solidification rate since cracks in joints can be avoided. Finally, a microstructure-property-joint suitability correlation is presented.","lang":"eng"}],"language":[{"iso":"eng"}],"article_number":"132","doi":"10.3390/jmmp7040132","author":[{"id":"32340","first_name":"Moritz","last_name":"Neuser","full_name":"Neuser, Moritz"},{"full_name":"Schaper, Mirko","last_name":"Schaper","first_name":"Mirko","id":"43720"},{"id":"43822","full_name":"Grydin, Olexandr","first_name":"Olexandr","last_name":"Grydin"}],"publication_identifier":{"issn":["2504-4494"]},"title":"Mechanical and Microstructure Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll Casting Process","year":"2023","intvolume":" 7","date_updated":"2026-05-12T13:51:41Z","publication_status":"published"},{"publication":" Conference: ICTP 2023: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of PlasticityAt: Cannes (France)","citation":{"ieee":"O. Grydin, M. Neuser, and M. Schaper, “Influence of Shell Material on the Microstructure and Mechanical Properties of Twin-Roll Cast Al-Si-Mg Alloy,” 2023, doi: 10.1007/978-3-031-41341-4_61.","mla":"Grydin, Olexandr, et al. “Influence of Shell Material on the Microstructure and Mechanical Properties of Twin-Roll Cast Al-Si-Mg Alloy.” Conference: ICTP 2023: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of PlasticityAt: Cannes (France), Springer Nature Switzerland, 2023, doi:10.1007/978-3-031-41341-4_61.","apa":"Grydin, O., Neuser, M., & Schaper, M. (2023). Influence of Shell Material on the Microstructure and Mechanical Properties of Twin-Roll Cast Al-Si-Mg Alloy. Conference: ICTP 2023: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of PlasticityAt: Cannes (France). https://doi.org/10.1007/978-3-031-41341-4_61","bibtex":"@inproceedings{Grydin_Neuser_Schaper_2023, place={Cham}, title={Influence of Shell Material on the Microstructure and Mechanical Properties of Twin-Roll Cast Al-Si-Mg Alloy}, DOI={10.1007/978-3-031-41341-4_61}, booktitle={ Conference: ICTP 2023: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of PlasticityAt: Cannes (France)}, publisher={Springer Nature Switzerland}, author={Grydin, Olexandr and Neuser, Moritz and Schaper, Mirko}, year={2023} }","short":"O. Grydin, M. Neuser, M. Schaper, in: Conference: ICTP 2023: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of PlasticityAt: Cannes (France), Springer Nature Switzerland, Cham, 2023.","ama":"Grydin O, Neuser M, Schaper M. Influence of Shell Material on the Microstructure and Mechanical Properties of Twin-Roll Cast Al-Si-Mg Alloy. In: Conference: ICTP 2023: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of PlasticityAt: Cannes (France). Springer Nature Switzerland; 2023. doi:10.1007/978-3-031-41341-4_61","chicago":"Grydin, Olexandr, Moritz Neuser, and Mirko Schaper. “Influence of Shell Material on the Microstructure and Mechanical Properties of Twin-Roll Cast Al-Si-Mg Alloy.” In Conference: ICTP 2023: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of PlasticityAt: Cannes (France). Cham: Springer Nature Switzerland, 2023. https://doi.org/10.1007/978-3-031-41341-4_61."},"quality_controlled":"1","project":[{"name":"TRR 285 – A02: TRR 285 - Subproject A02","_id":"136"},{"name":"TRR 285 - Project Area A","_id":"131"},{"_id":"130","name":"TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten"}],"place":"Cham","date_created":"2024-03-08T16:11:21Z","type":"conference","department":[{"_id":"158"}],"title":"Influence of Shell Material on the Microstructure and Mechanical Properties of Twin-Roll Cast Al-Si-Mg Alloy","status":"public","year":"2023","publication_identifier":{"isbn":["9783031413407","9783031413414"],"issn":["2195-4356","2195-4364"]},"author":[{"full_name":"Grydin, Olexandr","first_name":"Olexandr","last_name":"Grydin","id":"43822"},{"full_name":"Neuser, Moritz","last_name":"Neuser","first_name":"Moritz","id":"32340"},{"full_name":"Schaper, Mirko","first_name":"Mirko","last_name":"Schaper","id":"43720"}],"date_updated":"2026-05-12T13:50:46Z","publication_status":"published","language":[{"iso":"eng"}],"_id":"52406","publisher":"Springer Nature Switzerland","doi":"10.1007/978-3-031-41341-4_61","user_id":"7850"},{"publication":"Lecture Notes in Mechanical Engineering","date_created":"2024-03-11T08:00:47Z","department":[{"_id":"157"}],"type":"book_chapter","author":[{"id":"45779","last_name":"Böhnke","first_name":"Max","full_name":"Böhnke, Max"},{"first_name":"Christian Roman","last_name":"Bielak","full_name":"Bielak, Christian Roman","id":"34782"},{"first_name":"Mathias","last_name":"Bobbert","full_name":"Bobbert, Mathias","id":"7850"},{"id":"32056","last_name":"Meschut","orcid":"0000-0002-2763-1246","first_name":"Gerson","full_name":"Meschut, Gerson"}],"publication_identifier":{"isbn":["9783031413407","9783031413414"],"issn":["2195-4356","2195-4364"]},"title":"Experimental and Numerical Investigation of Clinched Joints Under Shear Tensile Loading at High Strain Rates","year":"2023","date_updated":"2026-05-12T14:09:35Z","publication_status":"published","language":[{"iso":"eng"}],"doi":"10.1007/978-3-031-41341-4_12","citation":{"ieee":"M. Böhnke, C. R. Bielak, M. Bobbert, and G. Meschut, “Experimental and Numerical Investigation of Clinched Joints Under Shear Tensile Loading at High Strain Rates,” in Lecture Notes in Mechanical Engineering, Cham: Springer Nature Switzerland, 2023.","apa":"Böhnke, M., Bielak, C. R., Bobbert, M., & Meschut, G. (2023). Experimental and Numerical Investigation of Clinched Joints Under Shear Tensile Loading at High Strain Rates. In Lecture Notes in Mechanical Engineering. 14th International Conference on the Technology of Plasticity. Springer Nature Switzerland. https://doi.org/10.1007/978-3-031-41341-4_12","short":"M. Böhnke, C.R. Bielak, M. Bobbert, G. Meschut, in: Lecture Notes in Mechanical Engineering, Springer Nature Switzerland, Cham, 2023.","chicago":"Böhnke, Max, Christian Roman Bielak, Mathias Bobbert, and Gerson Meschut. “Experimental and Numerical Investigation of Clinched Joints Under Shear Tensile Loading at High Strain Rates.” In Lecture Notes in Mechanical Engineering. Cham: Springer Nature Switzerland, 2023. https://doi.org/10.1007/978-3-031-41341-4_12.","mla":"Böhnke, Max, et al. “Experimental and Numerical Investigation of Clinched Joints Under Shear Tensile Loading at High Strain Rates.” Lecture Notes in Mechanical Engineering, Springer Nature Switzerland, 2023, doi:10.1007/978-3-031-41341-4_12.","bibtex":"@inbook{Böhnke_Bielak_Bobbert_Meschut_2023, place={Cham}, title={Experimental and Numerical Investigation of Clinched Joints Under Shear Tensile Loading at High Strain Rates}, DOI={10.1007/978-3-031-41341-4_12}, booktitle={Lecture Notes in Mechanical Engineering}, publisher={Springer Nature Switzerland}, author={Böhnke, Max and Bielak, Christian Roman and Bobbert, Mathias and Meschut, Gerson}, year={2023} }","ama":"Böhnke M, Bielak CR, Bobbert M, Meschut G. Experimental and Numerical Investigation of Clinched Joints Under Shear Tensile Loading at High Strain Rates. In: Lecture Notes in Mechanical Engineering. Springer Nature Switzerland; 2023. doi:10.1007/978-3-031-41341-4_12"},"project":[{"_id":"135","name":"TRR 285 – A01: TRR 285 - Subproject A01"},{"_id":"131","name":"TRR 285 - Project Area A"},{"name":"TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten","_id":"130"}],"quality_controlled":"1","place":"Cham","conference":{"name":"14th International Conference on the Technology of Plasticity"},"status":"public","publisher":"Springer Nature Switzerland","_id":"52454","user_id":"7850"},{"has_accepted_license":"1","status":"public","user_id":"126182","ddc":["510"],"editor":[{"full_name":"Dilling, Frederik","first_name":"Frederik","last_name":"Dilling"},{"first_name":"Daniel","last_name":"Thurm","full_name":"Thurm, Daniel"},{"full_name":"Witzke, Ingo","first_name":"Ingo","last_name":"Witzke"}],"page":"213–222","_id":"65888","quality_controlled":"1","file_date_updated":"2026-06-15T10:11:08Z","citation":{"short":"C. Tusche, R. Herold-Blasius, L. Graewert, K. Gruhn, A. Büdenbender, F. Sprütten, P. Tyrichter, in: F. Dilling, D. Thurm, I. Witzke (Eds.), Digitaler Mathematikunterricht in Forschung Und Praxis. Tagungsband Zur Vernetzungstagung 2022 in Siegen, 2023, pp. 213–222.","chicago":"Tusche, Carina, Raja Herold-Blasius, Laura Graewert, Katrin Gruhn, Anna Büdenbender, Frank Sprütten, and Paul Tyrichter. “Erfahrungsbasierte Entwicklungsschritte Zur Gestaltung Digitaler Mathematischer Exit-Games.” In Digitaler Mathematikunterricht in Forschung Und Praxis. Tagungsband Zur Vernetzungstagung 2022 in Siegen, edited by Frederik Dilling, Daniel Thurm, and Ingo Witzke, 213–222, 2023.","ieee":"C. Tusche et al., “Erfahrungsbasierte Entwicklungsschritte zur Gestaltung digitaler mathematischer Exit-Games,” in Digitaler Mathematikunterricht in Forschung und Praxis. Tagungsband zur Vernetzungstagung 2022 in Siegen, F. Dilling, D. Thurm, and I. Witzke, Eds. 2023, pp. 213–222.","apa":"Tusche, C., Herold-Blasius, R., Graewert, L., Gruhn, K., Büdenbender, A., Sprütten, F., & Tyrichter, P. (2023). Erfahrungsbasierte Entwicklungsschritte zur Gestaltung digitaler mathematischer Exit-Games. In F. Dilling, D. Thurm, & I. Witzke (Eds.), Digitaler Mathematikunterricht in Forschung und Praxis. Tagungsband zur Vernetzungstagung 2022 in Siegen (pp. 213–222).","bibtex":"@inbook{Tusche_Herold-Blasius_Graewert_Gruhn_Büdenbender_Sprütten_Tyrichter_2023, title={Erfahrungsbasierte Entwicklungsschritte zur Gestaltung digitaler mathematischer Exit-Games}, booktitle={Digitaler Mathematikunterricht in Forschung und Praxis. Tagungsband zur Vernetzungstagung 2022 in Siegen}, author={Tusche, Carina and Herold-Blasius, Raja and Graewert, Laura and Gruhn, Katrin and Büdenbender, Anna and Sprütten, Frank and Tyrichter, Paul}, editor={Dilling, Frederik and Thurm, Daniel and Witzke, Ingo}, year={2023}, pages={213–222} }","ama":"Tusche C, Herold-Blasius R, Graewert L, et al. Erfahrungsbasierte Entwicklungsschritte zur Gestaltung digitaler mathematischer Exit-Games. In: Dilling F, Thurm D, Witzke I, eds. Digitaler Mathematikunterricht in Forschung Und Praxis. Tagungsband Zur Vernetzungstagung 2022 in Siegen. ; 2023:213–222.","mla":"Tusche, Carina, et al. “Erfahrungsbasierte Entwicklungsschritte Zur Gestaltung Digitaler Mathematischer Exit-Games.” Digitaler Mathematikunterricht in Forschung Und Praxis. Tagungsband Zur Vernetzungstagung 2022 in Siegen, edited by Frederik Dilling et al., 2023, pp. 213–222."},"oa":"1","date_updated":"2026-06-24T06:41:54Z","year":"2023","title":"Erfahrungsbasierte Entwicklungsschritte zur Gestaltung digitaler mathematischer Exit-Games","author":[{"full_name":"Tusche, Carina","last_name":"Tusche","first_name":"Carina"},{"full_name":"Herold-Blasius, Raja","last_name":"Herold-Blasius","first_name":"Raja","id":"126182"},{"full_name":"Graewert, Laura","first_name":"Laura","last_name":"Graewert"},{"full_name":"Gruhn, Katrin","first_name":"Katrin","last_name":"Gruhn"},{"first_name":"Anna","last_name":"Büdenbender","full_name":"Büdenbender, Anna"},{"last_name":"Sprütten","first_name":"Frank","full_name":"Sprütten, Frank"},{"first_name":"Paul","last_name":"Tyrichter","full_name":"Tyrichter, Paul"}],"main_file_link":[{"open_access":"1"}],"language":[{"iso":"eng"}],"publication":"Digitaler Mathematikunterricht in Forschung und Praxis. Tagungsband zur Vernetzungstagung 2022 in Siegen","type":"book_chapter","file":[{"date_created":"2026-06-15T10:11:08Z","creator":"rheroldb","file_id":"65889","content_type":"application/pdf","file_name":"2023_Vernetzungstagung_Tusche, Herold-Blasius et al_Entwicklung von Exit-Games.pdf","access_level":"open_access","file_size":1019213,"relation":"main_file","date_updated":"2026-06-15T10:11:08Z"}],"date_created":"2026-06-15T10:11:11Z"},{"quality_controlled":"1","extern":"1","citation":{"mla":"Pöllmann, Andreas. “Interkulturelles Kapital.” EEO Enzyklopädie Erziehungswissenschaften Online, Beltz Verlagsgruppe GmbH & Co. KG, 2023, pp. 1–19, doi:10.3262/eeo06230481.","bibtex":"@inbook{Pöllmann_2023, title={Interkulturelles Kapital}, DOI={10.3262/eeo06230481}, booktitle={EEO Enzyklopädie Erziehungswissenschaften Online}, publisher={Beltz Verlagsgruppe GmbH & Co. KG}, author={Pöllmann, Andreas}, year={2023}, pages={1–19} }","ama":"Pöllmann A. Interkulturelles Kapital. In: EEO Enzyklopädie Erziehungswissenschaften Online. Beltz Verlagsgruppe GmbH & Co. KG; 2023:1-19. doi:10.3262/eeo06230481","ieee":"A. Pöllmann, “Interkulturelles Kapital,” in EEO Enzyklopädie Erziehungswissenschaften Online, Beltz Verlagsgruppe GmbH & Co. KG, 2023, pp. 1–19.","apa":"Pöllmann, A. (2023). Interkulturelles Kapital. In EEO Enzyklopädie Erziehungswissenschaften Online (pp. 1–19). Beltz Verlagsgruppe GmbH & Co. KG. https://doi.org/10.3262/eeo06230481","short":"A. Pöllmann, in: EEO Enzyklopädie Erziehungswissenschaften Online, Beltz Verlagsgruppe GmbH & Co. KG, 2023, pp. 1–19.","chicago":"Pöllmann, Andreas. “Interkulturelles Kapital.” In EEO Enzyklopädie Erziehungswissenschaften Online, 1–19. Beltz Verlagsgruppe GmbH & Co. KG, 2023. https://doi.org/10.3262/eeo06230481."},"publication":"EEO Enzyklopädie Erziehungswissenschaften Online","type":"encyclopedia_article","date_created":"2026-08-05T09:54:55Z","date_updated":"2026-08-24T08:16:16Z","publication_status":"published","publication_identifier":{"issn":["2191-8325"]},"author":[{"full_name":"Pöllmann, Andreas","last_name":"Pöllmann","first_name":"Andreas","orcid":"0000-0002-9090-2547","id":"77437"}],"title":"Interkulturelles Kapital","status":"public","year":"2023","doi":"10.3262/eeo06230481","user_id":"77437","_id":"66659","language":[{"iso":"ger"}],"publisher":"Beltz Verlagsgruppe GmbH & Co. KG","page":"1-19"},{"page":"17–36","_id":"45185","publisher":"Universitätsbibliothek Paderborn","user_id":"27419","volume":4,"editor":[{"full_name":"Hannebohm, Ronja","last_name":"Hannebohm","first_name":"Ronja"},{"first_name":"Anda-Lisa","last_name":"Harmening","full_name":"Harmening, Anda-Lisa"}],"status":"public","conference":{"end_date":"2021-09-17","location":"Paderborn","start_date":"2021-09-16","name":"4. Studentischer Workshop der Komparatistik: Biopolitik(en) in Literatur, Film und Serie: Aushandlungs- und Reflexionsräume vom 18. Jahrhundert bis heute"},"place":"Paderborn","oa":"1","citation":{"short":"R. Hannebohm, in: R. Hannebohm, A.-L. Harmening (Eds.), Biopolitik(en) in Literatur, Film und Serie: Aushandlungs- und Reflexionsräume vom 18. Jahrhundert bis heute, Universitätsbibliothek Paderborn, Paderborn, 2023, pp. 17–36.","chicago":"Hannebohm, Ronja. “Biopolitik und Biopoethik: Modi der Aushandlung menschlichen Lebens in (Gegenwarts-)Literatur, Film und Serie.” In Biopolitik(en) in Literatur, Film und Serie: Aushandlungs- und Reflexionsräume vom 18. Jahrhundert bis heute, edited by Ronja Hannebohm and Anda-Lisa Harmening, 4:17–36. Studien der Paderborner Komparatistik. Paderborn: Universitätsbibliothek Paderborn, 2023. https://doi.org/10.17619/UNIPB/1-1721.","ieee":"R. Hannebohm, “Biopolitik und Biopoethik: Modi der Aushandlung menschlichen Lebens in (Gegenwarts-)Literatur, Film und Serie,” in Biopolitik(en) in Literatur, Film und Serie: Aushandlungs- und Reflexionsräume vom 18. Jahrhundert bis heute, vol. 4, R. Hannebohm and A.-L. Harmening, Eds. Paderborn: Universitätsbibliothek Paderborn, 2023, pp. 17–36.","apa":"Hannebohm, R. (2023). Biopolitik und Biopoethik: Modi der Aushandlung menschlichen Lebens in (Gegenwarts-)Literatur, Film und Serie. In R. Hannebohm & A.-L. Harmening (Eds.), Biopolitik(en) in Literatur, Film und Serie: Aushandlungs- und Reflexionsräume vom 18. Jahrhundert bis heute (Vol. 4, pp. 17–36). Universitätsbibliothek Paderborn. https://doi.org/10.17619/UNIPB/1-1721","bibtex":"@inbook{Hannebohm_2023, place={Paderborn}, series={Studien der Paderborner Komparatistik}, title={Biopolitik und Biopoethik: Modi der Aushandlung menschlichen Lebens in (Gegenwarts-)Literatur, Film und Serie}, volume={4}, DOI={10.17619/UNIPB/1-1721}, booktitle={Biopolitik(en) in Literatur, Film und Serie: Aushandlungs- und Reflexionsräume vom 18. Jahrhundert bis heute}, publisher={Universitätsbibliothek Paderborn}, author={Hannebohm, Ronja}, editor={Hannebohm, Ronja and Harmening, Anda-Lisa}, year={2023}, pages={17–36}, collection={Studien der Paderborner Komparatistik} }","ama":"Hannebohm R. Biopolitik und Biopoethik: Modi der Aushandlung menschlichen Lebens in (Gegenwarts-)Literatur, Film und Serie. In: Hannebohm R, Harmening A-L, eds. Biopolitik(en) in Literatur, Film und Serie: Aushandlungs- und Reflexionsräume vom 18. Jahrhundert bis heute. Vol 4. Studien der Paderborner Komparatistik. Universitätsbibliothek Paderborn; 2023:17–36. doi:10.17619/UNIPB/1-1721","mla":"Hannebohm, Ronja. “Biopolitik und Biopoethik: Modi der Aushandlung menschlichen Lebens in (Gegenwarts-)Literatur, Film und Serie.” Biopolitik(en) in Literatur, Film und Serie: Aushandlungs- und Reflexionsräume vom 18. Jahrhundert bis heute, edited by Ronja Hannebohm and Anda-Lisa Harmening, vol. 4, Universitätsbibliothek Paderborn, 2023, pp. 17–36, doi:10.17619/UNIPB/1-1721."},"quality_controlled":"1","main_file_link":[{"url":"https://digital.ub.uni-paderborn.de/hs/download/pdf/7124375","open_access":"1"}],"series_title":"Studien der Paderborner Komparatistik","language":[{"iso":"ger"}],"doi":"10.17619/UNIPB/1-1721","title":"Biopolitik und Biopoethik: Modi der Aushandlung menschlichen Lebens in (Gegenwarts-)Literatur, Film und Serie","year":"2023","author":[{"id":"27419","first_name":"Ronja","last_name":"Hannebohm","orcid":"0009-0005-8959-6182","full_name":"Hannebohm, Ronja"}],"publication_status":"published","date_updated":"2026-08-04T12:57:32Z","intvolume":" 4","date_created":"2023-05-22T06:57:30Z","type":"book_chapter","department":[{"_id":"116"}],"publication":"Biopolitik(en) in Literatur, Film und Serie: Aushandlungs- und Reflexionsräume vom 18. Jahrhundert bis heute"},{"oa":"1","place":"Paderborn","quality_controlled":"1","citation":{"apa":"Hannebohm, R., & Harmening, A.-L. M. J. A. (Eds.). (2023). Biopolitik(en) in Literatur, Film und Serie: Aushandlungs- und Reflexionsräume vom 18. Jahrhundert bis heute (Vol. 4). Universitätsbibliothek Paderborn. https://doi.org/10.17619/UNIPB/1-1721","ieee":"R. Hannebohm and A.-L. M. J. A. Harmening, Eds., Biopolitik(en) in Literatur, Film und Serie: Aushandlungs- und Reflexionsräume vom 18. Jahrhundert bis heute, vol. 4. Paderborn: Universitätsbibliothek Paderborn, 2023.","chicago":"Hannebohm, Ronja, and Anda-Lisa Martha Josephine Anna Harmening, eds. Biopolitik(en) in Literatur, Film und Serie: Aushandlungs- und Reflexionsräume vom 18. Jahrhundert bis heute. Vol. 4. Studien der Paderborner Komparatistik. Paderborn: Universitätsbibliothek Paderborn, 2023. https://doi.org/10.17619/UNIPB/1-1721.","short":"R. Hannebohm, A.-L.M.J.A. Harmening, eds., Biopolitik(en) in Literatur, Film und Serie: Aushandlungs- und Reflexionsräume vom 18. Jahrhundert bis heute, Universitätsbibliothek Paderborn, Paderborn, 2023.","mla":"Hannebohm, Ronja, and Anda-Lisa Martha Josephine Anna Harmening, editors. Biopolitik(en) in Literatur, Film und Serie: Aushandlungs- und Reflexionsräume vom 18. Jahrhundert bis heute. Universitätsbibliothek Paderborn, 2023, doi:10.17619/UNIPB/1-1721.","ama":"Hannebohm R, Harmening A-LMJA, eds. Biopolitik(en) in Literatur, Film und Serie: Aushandlungs- und Reflexionsräume vom 18. Jahrhundert bis heute. Vol 4. Universitätsbibliothek Paderborn; 2023. doi:10.17619/UNIPB/1-1721","bibtex":"@book{Hannebohm_Harmening_2023, place={Paderborn}, series={Studien der Paderborner Komparatistik}, title={Biopolitik(en) in Literatur, Film und Serie: Aushandlungs- und Reflexionsräume vom 18. Jahrhundert bis heute}, volume={4}, DOI={10.17619/UNIPB/1-1721}, publisher={Universitätsbibliothek Paderborn}, year={2023}, collection={Studien der Paderborner Komparatistik} }"},"volume":4,"editor":[{"id":"27419","full_name":"Hannebohm, Ronja","last_name":"Hannebohm","orcid":"0009-0005-8959-6182","first_name":"Ronja"},{"id":"48437","full_name":"Harmening, Anda-Lisa Martha Josephine Anna","last_name":"Harmening","first_name":"Anda-Lisa Martha Josephine Anna"}],"user_id":"27419","publisher":"Universitätsbibliothek Paderborn","_id":"45184","page":"297","conference":{"location":"Paderborn","start_date":"2021-09-16","name":"4. Studentischer Workshop der Komparatistik: Biopolitik(en) in Literatur, Film und Serie: Aushandlungs- und Reflexionsräume vom 18. Jahrhundert bis heute","end_date":"2021-09-17"},"status":"public","department":[{"_id":"116"}],"type":"book_editor","date_created":"2023-05-22T06:50:28Z","doi":"10.17619/UNIPB/1-1721","language":[{"iso":"ger"}],"series_title":"Studien der Paderborner Komparatistik","main_file_link":[{"open_access":"1","url":"https://digital.ub.uni-paderborn.de/hs/download/pdf/7124375"}],"intvolume":" 4","publication_status":"published","date_updated":"2026-08-04T12:57:30Z","year":"2023","title":"Biopolitik(en) in Literatur, Film und Serie: Aushandlungs- und Reflexionsräume vom 18. Jahrhundert bis heute"},{"publication_status":"published","date_updated":"2026-08-22T12:07:07Z","article_type":"original","intvolume":" 15","title":"Sense of Belonging at School as a quality measure of inclusion – Comparing the inclusive experimental school Laborschule Bielefeld with regular inclusive comprehensive schools and investigating the determining factors","year":"2023","publication_identifier":{"issn":["1866-6671"]},"author":[{"last_name":"Marker","first_name":"Rabea","full_name":"Marker, Rabea"},{"orcid":"0000-0001-5488-5105","last_name":"Kullmann","first_name":"Harry","full_name":"Kullmann, Harry","id":"77972"},{"full_name":"Zentarra, Dominik","last_name":"Zentarra","first_name":"Dominik"},{"full_name":"Geist, Sabine","first_name":"Sabine","last_name":"Geist"},{"first_name":"Birgit","last_name":"Lütje-Klose","full_name":"Lütje-Klose, Birgit"}],"doi":"10.31244/jero.2023.02.06","main_file_link":[{"open_access":"1","url":"https://www.pedocs.de/volltexte/2025/32500/pdf/JERO_2023_2_Marker_et_al_Sense_of_Belonging.pdf"}],"language":[{"iso":"eng"}],"abstract":[{"text":"Sense of belonging at school (SoBaS) is a basic requirement for every student and\r\na major inclusivity goal for educational institutions. In the present study, we re-\r\nport on a self-evaluation of the Laborschule Bielefeld (LS; Germany) covering\r\n SoBaS. LS is an inclusive experimental comprehensive school with more than for-\r\nty years of experience concerning a non-segregative and diversity-friendly school\r\nculture. Based on propensity score matching, the study investigated whether the\r\nSoBaS scores of the students at this inclusive experimental school (N= 115) differ\r\nfrom the students visiting inclusive classes in regular state-run comprehensive\r\nschools (N= 2376). Furthermore, we examined the factors in the students’ educa-\r\ntional environment at LS that may potentially influence their SoBaS. The results\r\nindicate that the students attending the LS experienced a higher SoBaS. In additi-\r\non, certain aspects of LS's teaching and interaction culture were identified as aus-\r\npicious factors for accomplishing high levels of students’ SoBaS.","lang":"eng"}],"publication":"Journal for Educational Research Online","issue":"2","keyword":["sense of belonging","inclusive education","secondary school","social-emotional needs"],"type":"journal_article","department":[{"_id":"556"}],"date_created":"2026-07-14T08:12:06Z","status":"public","jel":["I24"],"user_id":"105186","volume":15,"page":"250-273","publisher":"Waxmann","_id":"66479","quality_controlled":"1","citation":{"mla":"Marker, Rabea, et al. “Sense of Belonging at School as a Quality Measure of Inclusion – Comparing the Inclusive Experimental School Laborschule Bielefeld with Regular Inclusive Comprehensive Schools and Investigating the Determining Factors.” Journal for Educational Research Online, vol. 15, no. 2, Waxmann, 2023, pp. 250–73, doi:10.31244/jero.2023.02.06.","ama":"Marker R, Kullmann H, Zentarra D, Geist S, Lütje-Klose B. Sense of Belonging at School as a quality measure of inclusion – Comparing the inclusive experimental school Laborschule Bielefeld with regular inclusive comprehensive schools and investigating the determining factors. Journal for Educational Research Online. 2023;15(2):250-273. doi:10.31244/jero.2023.02.06","bibtex":"@article{Marker_Kullmann_Zentarra_Geist_Lütje-Klose_2023, title={Sense of Belonging at School as a quality measure of inclusion – Comparing the inclusive experimental school Laborschule Bielefeld with regular inclusive comprehensive schools and investigating the determining factors}, volume={15}, DOI={10.31244/jero.2023.02.06}, number={2}, journal={Journal for Educational Research Online}, publisher={Waxmann}, author={Marker, Rabea and Kullmann, Harry and Zentarra, Dominik and Geist, Sabine and Lütje-Klose, Birgit}, year={2023}, pages={250–273} }","apa":"Marker, R., Kullmann, H., Zentarra, D., Geist, S., & Lütje-Klose, B. (2023). Sense of Belonging at School as a quality measure of inclusion – Comparing the inclusive experimental school Laborschule Bielefeld with regular inclusive comprehensive schools and investigating the determining factors. Journal for Educational Research Online, 15(2), 250–273. https://doi.org/10.31244/jero.2023.02.06","ieee":"R. Marker, H. Kullmann, D. Zentarra, S. Geist, and B. Lütje-Klose, “Sense of Belonging at School as a quality measure of inclusion – Comparing the inclusive experimental school Laborschule Bielefeld with regular inclusive comprehensive schools and investigating the determining factors,” Journal for Educational Research Online, vol. 15, no. 2, pp. 250–273, 2023, doi: 10.31244/jero.2023.02.06.","chicago":"Marker, Rabea, Harry Kullmann, Dominik Zentarra, Sabine Geist, and Birgit Lütje-Klose. “Sense of Belonging at School as a Quality Measure of Inclusion – Comparing the Inclusive Experimental School Laborschule Bielefeld with Regular Inclusive Comprehensive Schools and Investigating the Determining Factors.” Journal for Educational Research Online 15, no. 2 (2023): 250–73. https://doi.org/10.31244/jero.2023.02.06.","short":"R. Marker, H. Kullmann, D. Zentarra, S. Geist, B. Lütje-Klose, Journal for Educational Research Online 15 (2023) 250–273."},"oa":"1"},{"publication":"European Journal of Special Needs Education","abstract":[{"text":"Research in inclusive education reveals multiple studies that explore the efforts of individual stakeholders to create an equitable educational experience for students with disabilities. However, these individual efforts are often examined discretely, compartmentalising the contributions of various stakeholders. As a consequence, the complex interplay between these contributions has not been fully\r\nexplored, with the capacity for a rich network of support being assumed rather than explicitly constructed. This report draws on the personal reflections of nine academics in the field of inclusive\r\neducation from Australia, Canada, Germany, Greece, Italy, and Switzerland. Serving as both contributors and participants, this study draws together their personal interpretations and their exper-\r\ntise regarding the value of collective and collaborative inclusive education. Inductive thematic analysis of participant reflections yielded the view that stakeholders working together within an educational setting, offers more effective and appropriate opportunities to support learners with additional needs.","lang":"eng"}],"date_created":"2022-05-03T06:52:48Z","department":[{"_id":"556"}],"keyword":["Inclusive education","inclusive schools","school leadership","school community","village mindset"],"type":"journal_article","author":[{"full_name":"Subban, Pearl ","first_name":"Pearl ","last_name":"Subban"},{"first_name":"Brent","last_name":"Bradford","full_name":"Bradford, Brent"},{"full_name":"Sharma, Umesh","last_name":"Sharma","first_name":"Umesh"},{"last_name":"Loreman","first_name":"Tim","full_name":"Loreman, Tim"},{"full_name":"Avramidis, Elias","first_name":"Elias","last_name":"Avramidis"},{"id":"77972","full_name":"Kullmann, Harry","first_name":"Harry","last_name":"Kullmann","orcid":"0000-0001-5488-5105"},{"last_name":"Sahli Lozano","first_name":"Caroline","full_name":"Sahli Lozano, Caroline"},{"first_name":"Alessandra","last_name":"Romano","full_name":"Romano, Alessandra"},{"full_name":"Woodcock, Stuart","first_name":"Stuart","last_name":"Woodcock"}],"year":"2023","title":"Does it really take a village to raise a child? Reflections on the need for collective responsibility in inclusive education","article_type":"original","intvolume":" 37","publication_status":"published","date_updated":"2026-08-22T12:27:42Z","language":[{"iso":"eng"}],"main_file_link":[{"open_access":"1","url":"https://www.tandfonline.com/doi/epdf/10.1080/08856257.2022.2059632?needAccess=true"}],"doi":"10.1080/08856257.2022.2059632","citation":{"ieee":"P. Subban et al., “Does it really take a village to raise a child? Reflections on the need for collective responsibility in inclusive education,” European Journal of Special Needs Education, vol. 37, pp. 291–302, 2023, doi: 10.1080/08856257.2022.2059632.","apa":"Subban, P., Bradford, B., Sharma, U., Loreman, T., Avramidis, E., Kullmann, H., Sahli Lozano, C., Romano, A., & Woodcock, S. (2023). Does it really take a village to raise a child? Reflections on the need for collective responsibility in inclusive education. European Journal of Special Needs Education, 37, 291–302. https://doi.org/10.1080/08856257.2022.2059632","short":"P. Subban, B. Bradford, U. Sharma, T. Loreman, E. Avramidis, H. Kullmann, C. Sahli Lozano, A. Romano, S. Woodcock, European Journal of Special Needs Education 37 (2023) 291–302.","chicago":"Subban, Pearl , Brent Bradford, Umesh Sharma, Tim Loreman, Elias Avramidis, Harry Kullmann, Caroline Sahli Lozano, Alessandra Romano, and Stuart Woodcock. “Does It Really Take a Village to Raise a Child? Reflections on the Need for Collective Responsibility in Inclusive Education.” European Journal of Special Needs Education 37 (2023): 291–302. https://doi.org/10.1080/08856257.2022.2059632.","mla":"Subban, Pearl, et al. “Does It Really Take a Village to Raise a Child? Reflections on the Need for Collective Responsibility in Inclusive Education.” European Journal of Special Needs Education, vol. 37, 2023, pp. 291–302, doi:10.1080/08856257.2022.2059632.","bibtex":"@article{Subban_Bradford_Sharma_Loreman_Avramidis_Kullmann_Sahli Lozano_Romano_Woodcock_2023, title={Does it really take a village to raise a child? Reflections on the need for collective responsibility in inclusive education}, volume={37}, DOI={10.1080/08856257.2022.2059632}, journal={European Journal of Special Needs Education}, author={Subban, Pearl and Bradford, Brent and Sharma, Umesh and Loreman, Tim and Avramidis, Elias and Kullmann, Harry and Sahli Lozano, Caroline and Romano, Alessandra and Woodcock, Stuart}, year={2023}, pages={291–302} }","ama":"Subban P, Bradford B, Sharma U, et al. Does it really take a village to raise a child? Reflections on the need for collective responsibility in inclusive education. European Journal of Special Needs Education. 2023;37:291–302. doi:10.1080/08856257.2022.2059632"},"quality_controlled":"1","oa":"1","jel":["I24"],"status":"public","_id":"31023","page":"291–302","volume":37,"user_id":"105186"},{"title":"The dark triad and corporate sustainability: An empirical analysis of personality traits of middle managers","status":"public","year":"2022","author":[{"id":"67265","first_name":"Matthias","orcid":" https://orcid.org/0000-0001-5740-2420","last_name":"Pelster","full_name":"Pelster, Matthias"},{"full_name":"Schaltegger, Stefan","last_name":"Schaltegger","first_name":"Stefan"}],"publication_status":"published","date_updated":"2022-01-06T06:56:44Z","article_type":"original","page":"80-99","language":[{"iso":"eng"}],"_id":"25041","user_id":"67265","doi":"10.1111/beer.12398","volume":" 31","issue":"1","publication":"Business Ethics, the Environment & Responsibility","citation":{"ieee":"M. Pelster and S. Schaltegger, “The dark triad and corporate sustainability: An empirical analysis of personality traits of middle managers,” Business Ethics, the Environment & Responsibility, vol. 31, no. 1, pp. 80–99, 2022, doi: 10.1111/beer.12398.","apa":"Pelster, M., & Schaltegger, S. (2022). The dark triad and corporate sustainability: An empirical analysis of personality traits of middle managers. Business Ethics, the Environment & Responsibility, 31(1), 80–99. https://doi.org/10.1111/beer.12398","chicago":"Pelster, Matthias, and Stefan Schaltegger. “The Dark Triad and Corporate Sustainability: An Empirical Analysis of Personality Traits of Middle Managers.” Business Ethics, the Environment & Responsibility 31, no. 1 (2022): 80–99. https://doi.org/10.1111/beer.12398.","short":"M. Pelster, S. Schaltegger, Business Ethics, the Environment & Responsibility 31 (2022) 80–99.","mla":"Pelster, Matthias, and Stefan Schaltegger. “The Dark Triad and Corporate Sustainability: An Empirical Analysis of Personality Traits of Middle Managers.” Business Ethics, the Environment & Responsibility, vol. 31, no. 1, 2022, pp. 80–99, doi:10.1111/beer.12398.","bibtex":"@article{Pelster_Schaltegger_2022, title={The dark triad and corporate sustainability: An empirical analysis of personality traits of middle managers}, volume={31}, DOI={10.1111/beer.12398}, number={1}, journal={Business Ethics, the Environment & Responsibility}, author={Pelster, Matthias and Schaltegger, Stefan}, year={2022}, pages={80–99} }","ama":"Pelster M, Schaltegger S. The dark triad and corporate sustainability: An empirical analysis of personality traits of middle managers. Business Ethics, the Environment & Responsibility. 2022;31(1):80-99. doi:10.1111/beer.12398"},"quality_controlled":"1","date_created":"2021-09-25T15:25:22Z","type":"journal_article","department":[{"_id":"186"},{"_id":"578"}]},{"date_updated":"2022-02-09T07:24:35Z","publication_status":"published","year":"2022","title":"Fachliche und überfachliche Herausforderungen in der Studieneingangsphase Physik","author":[{"id":"24755","first_name":"Anna","last_name":"Bauer","orcid":"0000-0002-1742-3099","full_name":"Bauer, Anna"},{"full_name":"Woitkowski, David","last_name":"Woitkowski","first_name":"David"},{"full_name":"Reuter, Dirk","last_name":"Reuter","first_name":"Dirk","id":"37763"},{"first_name":"Peter","last_name":"Reinhold","full_name":"Reinhold, Peter"}],"doi":"10.1007/978-3-658-34185-5_19","main_file_link":[{"url":"https://link.springer.com/chapter/10.1007/978-3-658-34185-5_19"}],"series_title":"Diversität und Bildung im digitalen Zeitalter","language":[{"iso":"ger"}],"abstract":[{"text":"Die Studieneingangsphase Physik stellt für die Studienanfänger Innen einen komplexen Lernprozess mit vielfältigen Anforderungen auf fachlicher, Metakognitions- und Sozialisations-Ebene dar, der ihre akademische Identitätsbildung beeinflusst und prägt.\r\n\r\nZiel des Projektes Paderborner Studieneingangsphase Physik (PSΦ) ist die evidenzbasierte Gestaltung eines strukturierten Studieneinstiegs und einer in sich kohärent abgestimmten Studieneingangsphase „aus einem Guss“. Die Implementation eines neuen Übungsformats (Präsenzübungen) in den Fachvorlesungen sowie die Unterstützung der Studierenden im Bereich des selbstregulierten Lernens zeigen positive Effekte in einer erhöhten Teilnahmequote sowie Zufriedenheit der Studierenden mit der Veranstaltung, in einem aktiveren Arbeitsverhalten sowie einer höheren Bestehensquote der Klausur. Ein messbar größerer Fachwissenserwerb konnte nicht nachgewiesen werden. Auf Basis der Evidenzen konnten Stellschrauben für die Weiterentwicklung sowie für die Unterstützung der Lehrenden abgeleitet werden.\r\n\r\nIn dem Beitrag werden die Gelingensbedingungen und Strukturen für eine wirksame Zusammenarbeit von Fachdidaktik und Fachwissenschaft am Beispiel der Überarbeitung der Studieneingangsphase im Rahmen einer community of practice sowie der Wirksamkeit der Implementierung diskutiert.","lang":"ger"}],"publication":"Hochschullehre erforschen. ","type":"book_chapter","department":[{"_id":"299"},{"_id":"651"}],"date_created":"2022-02-08T13:41:08Z","status":"public","user_id":"42514","editor":[{"full_name":"Fahr, Uwe ","first_name":"Uwe ","last_name":"Fahr"},{"full_name":"Kenner, Alessandra","last_name":"Kenner","first_name":"Alessandra"},{"full_name":"Angenent, Holger","last_name":"Angenent","first_name":"Holger"},{"first_name":"Alexandra","last_name":"Eßer-Lüghausen","full_name":"Eßer-Lüghausen, Alexandra"}],"page":"339-362","_id":"29789","publisher":"Springer Fachmedien","quality_controlled":"1","citation":{"short":"A. Bauer, D. Woitkowski, D. Reuter, P. Reinhold, in: U. Fahr, A. Kenner, H. Angenent, A. Eßer-Lüghausen (Eds.), Hochschullehre erforschen. , Springer Fachmedien, Wiesbaden, 2022, pp. 339–362.","chicago":"Bauer, Anna, David Woitkowski, Dirk Reuter, and Peter Reinhold. “Fachliche und überfachliche Herausforderungen in der Studieneingangsphase Physik.” In Hochschullehre erforschen. , edited by Uwe Fahr, Alessandra Kenner, Holger Angenent, and Alexandra Eßer-Lüghausen, 339–62. Diversität und Bildung im digitalen Zeitalter. Wiesbaden: Springer Fachmedien, 2022. https://doi.org/10.1007/978-3-658-34185-5_19.","apa":"Bauer, A., Woitkowski, D., Reuter, D., & Reinhold, P. (2022). Fachliche und überfachliche Herausforderungen in der Studieneingangsphase Physik. In U. Fahr, A. Kenner, H. Angenent, & A. Eßer-Lüghausen (Eds.), Hochschullehre erforschen. (pp. 339–362). Springer Fachmedien. https://doi.org/10.1007/978-3-658-34185-5_19","ieee":"A. Bauer, D. Woitkowski, D. Reuter, and P. Reinhold, “Fachliche und überfachliche Herausforderungen in der Studieneingangsphase Physik,” in Hochschullehre erforschen. , U. Fahr, A. Kenner, H. Angenent, and A. Eßer-Lüghausen, Eds. Wiesbaden: Springer Fachmedien, 2022, pp. 339–362.","ama":"Bauer A, Woitkowski D, Reuter D, Reinhold P. Fachliche und überfachliche Herausforderungen in der Studieneingangsphase Physik. In: Fahr U, Kenner A, Angenent H, Eßer-Lüghausen A, eds. Hochschullehre erforschen. . Diversität und Bildung im digitalen Zeitalter. Springer Fachmedien; 2022:339-362. doi:10.1007/978-3-658-34185-5_19","bibtex":"@inbook{Bauer_Woitkowski_Reuter_Reinhold_2022, place={Wiesbaden}, series={Diversität und Bildung im digitalen Zeitalter}, title={Fachliche und überfachliche Herausforderungen in der Studieneingangsphase Physik}, DOI={10.1007/978-3-658-34185-5_19}, booktitle={Hochschullehre erforschen. }, publisher={Springer Fachmedien}, author={Bauer, Anna and Woitkowski, David and Reuter, Dirk and Reinhold, Peter}, editor={Fahr, Uwe and Kenner, Alessandra and Angenent, Holger and Eßer-Lüghausen, Alexandra}, year={2022}, pages={339–362}, collection={Diversität und Bildung im digitalen Zeitalter} }","mla":"Bauer, Anna, et al. “Fachliche und überfachliche Herausforderungen in der Studieneingangsphase Physik.” Hochschullehre erforschen. , edited by Uwe Fahr et al., Springer Fachmedien, 2022, pp. 339–62, doi:10.1007/978-3-658-34185-5_19."},"place":"Wiesbaden"}]