[{"date_updated":"2025-01-30T14:40:06Z","publication_status":"published","author":[{"first_name":"Jan","last_name":"Wippermann","full_name":"Wippermann, Jan"},{"last_name":"Meschut","first_name":"Gerson","full_name":"Meschut, Gerson"}],"publication_identifier":{"issn":["0043-2288","1878-6669"]},"status":"public","year":"2025","title":"Numerical modeling of clamp load relaxation of plastic nuts under varying moisture and fiber contents","doi":"10.1007/s40194-025-01928-4","user_id":"55686","publisher":"Springer Science and Business Media LLC","_id":"58438","language":[{"iso":"eng"}],"quality_controlled":"1","abstract":[{"lang":"eng","text":"This study presents a numerical approach using a 3D finite element model to quantify the remaining clamp load of a plastic nut joint after a specific time. The viscoelastic relaxation of a thermoplastic nut, which is predominantly screwed on a welding stud, is described by a material card using Prony Series. Prony Series are derived from experimental dynamical mechanical analysis with different moisture and fiber contents of the thermoplastic. Since plastic nuts usually do not have preformed threads, the increased temperatures and resulting stresses from the thread-forming process are considered in the simulation. An FE model is created and verified by substrate stress relaxation tests. Experimental clamp load measurements with miniature compression load cells verify the clamp load prediction and show a good agreement. The developed model is used to analyze the clamp load distribution within the threads and reveals an almost even distribution within the threads."}],"citation":{"ama":"Wippermann J, Meschut G. Numerical modeling of clamp load relaxation of plastic nuts under varying moisture and fiber contents. <i>Welding in the World</i>. Published online 2025. doi:<a href=\"https://doi.org/10.1007/s40194-025-01928-4\">10.1007/s40194-025-01928-4</a>","bibtex":"@article{Wippermann_Meschut_2025, title={Numerical modeling of clamp load relaxation of plastic nuts under varying moisture and fiber contents}, DOI={<a href=\"https://doi.org/10.1007/s40194-025-01928-4\">10.1007/s40194-025-01928-4</a>}, journal={Welding in the World}, publisher={Springer Science and Business Media LLC}, author={Wippermann, Jan and Meschut, Gerson}, year={2025} }","mla":"Wippermann, Jan, and Gerson Meschut. “Numerical Modeling of Clamp Load Relaxation of Plastic Nuts under Varying Moisture and Fiber Contents.” <i>Welding in the World</i>, Springer Science and Business Media LLC, 2025, doi:<a href=\"https://doi.org/10.1007/s40194-025-01928-4\">10.1007/s40194-025-01928-4</a>.","short":"J. Wippermann, G. Meschut, Welding in the World (2025).","chicago":"Wippermann, Jan, and Gerson Meschut. “Numerical Modeling of Clamp Load Relaxation of Plastic Nuts under Varying Moisture and Fiber Contents.” <i>Welding in the World</i>, 2025. <a href=\"https://doi.org/10.1007/s40194-025-01928-4\">https://doi.org/10.1007/s40194-025-01928-4</a>.","apa":"Wippermann, J., &#38; Meschut, G. (2025). Numerical modeling of clamp load relaxation of plastic nuts under varying moisture and fiber contents. <i>Welding in the World</i>. <a href=\"https://doi.org/10.1007/s40194-025-01928-4\">https://doi.org/10.1007/s40194-025-01928-4</a>","ieee":"J. Wippermann and G. Meschut, “Numerical modeling of clamp load relaxation of plastic nuts under varying moisture and fiber contents,” <i>Welding in the World</i>, 2025, doi: <a href=\"https://doi.org/10.1007/s40194-025-01928-4\">10.1007/s40194-025-01928-4</a>."},"publication":"Welding in the World","department":[{"_id":"157"}],"type":"journal_article","date_created":"2025-01-30T14:26:50Z"},{"type":"journal_article","department":[{"_id":"157"}],"date_created":"2025-01-30T14:36:35Z","quality_controlled":"1","publication":"JOINING PLASTICS","citation":{"bibtex":"@article{Wippermann_Meschut_2025, title={Entwicklung einer Methode für die Prognose des Anziehdrehmoments von Kunststoffmutte}, journal={JOINING PLASTICS}, author={Wippermann, Jan and Meschut, Gerson}, year={2025} }","chicago":"Wippermann, Jan, and Gerson Meschut. “Entwicklung einer Methode für die Prognose des Anziehdrehmoments von Kunststoffmutte.” <i>JOINING PLASTICS</i>, 2025.","short":"J. Wippermann, G. Meschut, JOINING PLASTICS (2025).","ama":"Wippermann J, Meschut G. Entwicklung einer Methode für die Prognose des Anziehdrehmoments von Kunststoffmutte. <i>JOINING PLASTICS</i>. Published online 2025.","ieee":"J. Wippermann and G. Meschut, “Entwicklung einer Methode für die Prognose des Anziehdrehmoments von Kunststoffmutte,” <i>JOINING PLASTICS</i>, 2025.","mla":"Wippermann, Jan, and Gerson Meschut. “Entwicklung einer Methode für die Prognose des Anziehdrehmoments von Kunststoffmutte.” <i>JOINING PLASTICS</i>, 2025.","apa":"Wippermann, J., &#38; Meschut, G. (2025). Entwicklung einer Methode für die Prognose des Anziehdrehmoments von Kunststoffmutte. <i>JOINING PLASTICS</i>."},"user_id":"55686","language":[{"iso":"ger"}],"_id":"58444","date_updated":"2025-01-30T14:38:20Z","publication_status":"published","status":"public","year":"2025","title":"Entwicklung einer Methode für die Prognose des Anziehdrehmoments von Kunststoffmutte","author":[{"full_name":"Wippermann, Jan","last_name":"Wippermann","first_name":"Jan","orcid":"0000-0002-5013-853X","id":"55686"},{"last_name":"Meschut","first_name":"Gerson","orcid":"0000-0002-2763-1246","full_name":"Meschut, Gerson","id":"32056"}]},{"status":"public","year":"2025","title":"Effects of various process parameters in the joining process on the squeeze flow of highly viscous thermal interface materials","author":[{"full_name":"Gilich, Julian","first_name":"Julian","last_name":"Gilich","id":"44391"},{"id":"537","full_name":"Teutenberg, Dominik","last_name":"Teutenberg","first_name":"Dominik"},{"full_name":"Meschut, Gerson","first_name":"Gerson","last_name":"Meschut","orcid":"0000-0002-2763-1246","id":"32056"},{"first_name":"B.","last_name":"Gröger","full_name":"Gröger, B."},{"first_name":"F.","last_name":"Wiebicke","full_name":"Wiebicke, F."},{"last_name":"Koch","first_name":"I.","full_name":"Koch, I."},{"full_name":"Gude, M.","last_name":"Gude","first_name":"M."}],"publication_identifier":{"issn":["0043-2288","1878-6669"]},"publication_status":"published","date_updated":"2025-01-31T12:22:09Z","publisher":"Springer Science and Business Media LLC","_id":"58454","language":[{"iso":"eng"}],"user_id":"44391","doi":"10.1007/s40194-025-01929-3","publication":"Welding in the World","citation":{"bibtex":"@article{Gilich_Teutenberg_Meschut_Gröger_Wiebicke_Koch_Gude_2025, title={Effects of various process parameters in the joining process on the squeeze flow of highly viscous thermal interface materials}, DOI={<a href=\"https://doi.org/10.1007/s40194-025-01929-3\">10.1007/s40194-025-01929-3</a>}, journal={Welding in the World}, publisher={Springer Science and Business Media LLC}, author={Gilich, Julian and Teutenberg, Dominik and Meschut, Gerson and Gröger, B. and Wiebicke, F. and Koch, I. and Gude, M.}, year={2025} }","ama":"Gilich J, Teutenberg D, Meschut G, et al. Effects of various process parameters in the joining process on the squeeze flow of highly viscous thermal interface materials. <i>Welding in the World</i>. Published online 2025. doi:<a href=\"https://doi.org/10.1007/s40194-025-01929-3\">10.1007/s40194-025-01929-3</a>","mla":"Gilich, Julian, et al. “Effects of Various Process Parameters in the Joining Process on the Squeeze Flow of Highly Viscous Thermal Interface Materials.” <i>Welding in the World</i>, Springer Science and Business Media LLC, 2025, doi:<a href=\"https://doi.org/10.1007/s40194-025-01929-3\">10.1007/s40194-025-01929-3</a>.","short":"J. Gilich, D. Teutenberg, G. Meschut, B. Gröger, F. Wiebicke, I. Koch, M. Gude, Welding in the World (2025).","chicago":"Gilich, Julian, Dominik Teutenberg, Gerson Meschut, B. Gröger, F. Wiebicke, I. Koch, and M. Gude. “Effects of Various Process Parameters in the Joining Process on the Squeeze Flow of Highly Viscous Thermal Interface Materials.” <i>Welding in the World</i>, 2025. <a href=\"https://doi.org/10.1007/s40194-025-01929-3\">https://doi.org/10.1007/s40194-025-01929-3</a>.","ieee":"J. Gilich <i>et al.</i>, “Effects of various process parameters in the joining process on the squeeze flow of highly viscous thermal interface materials,” <i>Welding in the World</i>, 2025, doi: <a href=\"https://doi.org/10.1007/s40194-025-01929-3\">10.1007/s40194-025-01929-3</a>.","apa":"Gilich, J., Teutenberg, D., Meschut, G., Gröger, B., Wiebicke, F., Koch, I., &#38; Gude, M. (2025). Effects of various process parameters in the joining process on the squeeze flow of highly viscous thermal interface materials. <i>Welding in the World</i>. <a href=\"https://doi.org/10.1007/s40194-025-01929-3\">https://doi.org/10.1007/s40194-025-01929-3</a>"},"quality_controlled":"1","abstract":[{"text":"Powertrain concepts incorporating renewable energies are an essential element of the energy revolution and increasingly require efficient manufacturing processes for electronic systems. Particularly, the joining of structures to be thermally coupled, such as the battery modules and the thermal management system (TMS), poses new challenges in process design. Factors that limit the process include the increased density, viscosity, and abrasiveness of thermal pastes as well as the pressure sensitivity of battery modules. The research presented aims to systematically investigate the influences of joining parameters on flow behavior, the formation of air inclusions, and the occurring joining forces to understand and systematically optimize the joining process. Employing a test setup following the Closing-Hele-Shaw-Cell, the influence of specific process parameters on the joining process such as the joining speed, joining gap, application pattern, and temperature was investigated for a silicone- and a polyurethane-based thermally conductive paste. The results indicate a high dependency of both the ensuing joining forces and the flow behavior on the parameters investigated. These insights imply a potential systematic parameter optimization and the specific adaptation of the joining process to improve flow behavior and reduce compressive stresses. This can ensure lower component deformations and qualify the process for the employment of cell types with a higher power density, a reduced encapsulation, and lower stiffness while at the same time improving production rates.","lang":"eng"}],"date_created":"2025-01-31T12:07:57Z","type":"journal_article","department":[{"_id":"157"}]},{"abstract":[{"text":"Im Rahmen des BMBF-Forschungsvorhabens KORESIL wurden entlang einer beispielgebenden Prozesskette für hybride Leichtbaustrukturen notwendige Forschungs- und Entwicklungsschwerpunkte ermittelt. Insbesondere die Steigerung der Ressourceneffizienz und die Unterstützung des Menschen im Kontext zukünftiger Arbeitsumfelder standen dabei im Mittelpunkt der Arbeiten. Hierauf aufbauend konnten Handlungsempfehlungen für Wirtschaft, Wissenschaft und Politik abgeleitet werden. Das Projekt KORESIL ist eingebettet in das Projektnetzwerk des Forschungs- und Technologiezentrums für ressourceneffiziente Leichtbaustrukturen – FOREL. Dieses Zentrum wurde im Jahr 2013 als BMBF-Leuchtturmprojekt eingerichtet und ist eine offene, unabhängige Plattform zur Entwicklung von Hightech-Leichtbausystemlösungen in Multi-Material-Design für die Mobilität der Zukunft. Ziel der Plattform ist die Unterstützung von Entwicklungsprojekten, die Vernetzung der Leichtbauforschung innerhalb Deutschlands und die Zusammenführung verschiedener Förderinitiativen.","lang":"eng"}],"quality_controlled":"1","citation":{"chicago":"Gude, Maik, Erman Tekkaya, Michael F. Zäh, Gerson Meschut, and Holger Lieberwirth, eds. <i>Komplexität Beherrschen, Kreisläufe Schließen: Soziotechnische Systeme Für Ressourceneffiziente Leichtbaustrukturen ; Das Interaktive Whitepaper</i>. Technische Universität Dresden, 2025. <a href=\"https://doi.org/10.25368/2024.8\">https://doi.org/10.25368/2024.8</a>.","short":"M. Gude, E. Tekkaya, M.F. Zäh, G. Meschut, H. Lieberwirth, eds., Komplexität Beherrschen, Kreisläufe Schließen: Soziotechnische Systeme Für Ressourceneffiziente Leichtbaustrukturen ; Das Interaktive Whitepaper, Technische Universität Dresden, 2025.","apa":"Gude, M., Tekkaya, E., Zäh, M. F., Meschut, G., &#38; Lieberwirth, H. (Eds.). (2025). <i>Komplexität beherrschen, Kreisläufe schließen: Soziotechnische Systeme für ressourceneffiziente Leichtbaustrukturen ; Das interaktive Whitepaper</i>. Technische Universität Dresden. <a href=\"https://doi.org/10.25368/2024.8\">https://doi.org/10.25368/2024.8</a>","ieee":"M. Gude, E. Tekkaya, M. F. Zäh, G. Meschut, and H. Lieberwirth, Eds., <i>Komplexität beherrschen, Kreisläufe schließen: Soziotechnische Systeme für ressourceneffiziente Leichtbaustrukturen ; Das interaktive Whitepaper</i>. Technische Universität Dresden, 2025.","ama":"Gude M, Tekkaya E, Zäh MF, Meschut G, Lieberwirth H, eds. <i>Komplexität Beherrschen, Kreisläufe Schließen: Soziotechnische Systeme Für Ressourceneffiziente Leichtbaustrukturen ; Das Interaktive Whitepaper</i>. Technische Universität Dresden; 2025. doi:<a href=\"https://doi.org/10.25368/2024.8\">10.25368/2024.8</a>","bibtex":"@book{Gude_Tekkaya_Zäh_Meschut_Lieberwirth_2025, title={Komplexität beherrschen, Kreisläufe schließen: Soziotechnische Systeme für ressourceneffiziente Leichtbaustrukturen ; Das interaktive Whitepaper}, DOI={<a href=\"https://doi.org/10.25368/2024.8\">10.25368/2024.8</a>}, publisher={Technische Universität Dresden}, year={2025} }","mla":"Gude, Maik, et al., editors. <i>Komplexität Beherrschen, Kreisläufe Schließen: Soziotechnische Systeme Für Ressourceneffiziente Leichtbaustrukturen ; Das Interaktive Whitepaper</i>. Technische Universität Dresden, 2025, doi:<a href=\"https://doi.org/10.25368/2024.8\">10.25368/2024.8</a>."},"type":"book_editor","department":[{"_id":"157"}],"date_created":"2025-01-31T12:16:31Z","date_updated":"2025-01-31T12:37:17Z","publication_status":"published","status":"public","year":"2025","title":"Komplexität beherrschen, Kreisläufe schließen: Soziotechnische Systeme für ressourceneffiziente Leichtbaustrukturen ; Das interaktive Whitepaper","doi":"10.25368/2024.8","user_id":"44391","editor":[{"last_name":"Gude","first_name":"Maik","full_name":"Gude, Maik"},{"last_name":"Tekkaya","first_name":"Erman","full_name":"Tekkaya, Erman"},{"first_name":"Michael F.","last_name":"Zäh","full_name":"Zäh, Michael F."},{"id":"32056","first_name":"Gerson","orcid":"0000-0002-2763-1246","last_name":"Meschut","full_name":"Meschut, Gerson"},{"first_name":"Holger","last_name":"Lieberwirth","full_name":"Lieberwirth, Holger"}],"_id":"58456","publisher":"Technische Universität Dresden","language":[{"iso":"eng"}]},{"project":[{"name":"TRR 285 - C: TRR 285 - Project Area C","_id":"133"},{"grant_number":"418701707","_id":"130","name":"TRR 285: TRR 285:  Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten"}],"abstract":[{"lang":"eng","text":"<jats:p> To reduce CO<jats:sub>2</jats:sub> emissions, the industry, particularly in the mobility sector, focuses on lightweight vehicles with multi-material structures. As thermal joining processes are reaching their limits, mechanical techniques such as self-piercing riveting are being used. One innovative solution is the versatile self-piercing riveting process (V-SPR), which combines different material combinations with a multi-range rivet.<jats:sup> 1 </jats:sup> The joining process is divided into the piercing process and the forming process of the rivet head to the respective sheet thickness. The rivet shaft requires sufficient strength to punch through the punch-sided sheet, and sufficient ductility of the rivet head is required to form onto the punch-sided sheet. To achieve a combination of these requirements, local inductive heat treatment strategies are used for the rivet. To ensure reproducible rivet hardening, a specialised device has been developed for precise rivet positioning in the induction coil and the subsequent quenching process. The heat treatment differs in terms of hardening times and temperatures. In addition, the heat treatment is combined with a subsequent tempering process. The study aims to determine the resulting hardness distributions and microstructures of the rivet and to investigate the influence of different heat treatment strategies on joint formation and load-bearing capacities. The results show that a graded hardening profile has a positive effect on the spreading behaviour of the rivet foot and the forming behaviour of the rivet head. Furthermore, the load-bearing behaviour of the joints is increased. </jats:p>"}],"quality_controlled":"1","citation":{"mla":"Holtkamp, Pia Katharina, et al. “Investigation of Local Heat Treatment Strategies for a Multi-Range Capable Rivet and the Influence on Joint Formation and Load-Bearing Capacity.” <i>Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications</i>, SAGE Publications, 2025, doi:<a href=\"https://doi.org/10.1177/14644207241307508\">10.1177/14644207241307508</a>.","ama":"Holtkamp PK, Kappe F, Probst P, Bobbert M, Meschut G. Investigation of local heat treatment strategies for a multi-range capable rivet and the influence on joint formation and load-bearing capacity. <i>Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications</i>. Published online 2025. doi:<a href=\"https://doi.org/10.1177/14644207241307508\">10.1177/14644207241307508</a>","bibtex":"@article{Holtkamp_Kappe_Probst_Bobbert_Meschut_2025, title={Investigation of local heat treatment strategies for a multi-range capable rivet and the influence on joint formation and load-bearing capacity}, DOI={<a href=\"https://doi.org/10.1177/14644207241307508\">10.1177/14644207241307508</a>}, journal={Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications}, publisher={SAGE Publications}, author={Holtkamp, Pia Katharina and Kappe, Fabian and Probst, Paula and Bobbert, Mathias and Meschut, Gerson}, year={2025} }","apa":"Holtkamp, P. K., Kappe, F., Probst, P., Bobbert, M., &#38; Meschut, G. (2025). Investigation of local heat treatment strategies for a multi-range capable rivet and the influence on joint formation and load-bearing capacity. <i>Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications</i>. <a href=\"https://doi.org/10.1177/14644207241307508\">https://doi.org/10.1177/14644207241307508</a>","ieee":"P. K. Holtkamp, F. Kappe, P. Probst, M. Bobbert, and G. Meschut, “Investigation of local heat treatment strategies for a multi-range capable rivet and the influence on joint formation and load-bearing capacity,” <i>Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications</i>, 2025, doi: <a href=\"https://doi.org/10.1177/14644207241307508\">10.1177/14644207241307508</a>.","chicago":"Holtkamp, Pia Katharina, Fabian Kappe, Paula Probst, Mathias Bobbert, and Gerson Meschut. “Investigation of Local Heat Treatment Strategies for a Multi-Range Capable Rivet and the Influence on Joint Formation and Load-Bearing Capacity.” <i>Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications</i>, 2025. <a href=\"https://doi.org/10.1177/14644207241307508\">https://doi.org/10.1177/14644207241307508</a>.","short":"P.K. Holtkamp, F. Kappe, P. Probst, M. Bobbert, G. Meschut, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2025)."},"publication":"Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications","department":[{"_id":"43"},{"_id":"157"}],"type":"journal_article","date_created":"2025-02-03T09:26:32Z","date_updated":"2025-02-03T09:36:32Z","publication_status":"published","publication_identifier":{"issn":["1464-4207","2041-3076"]},"author":[{"last_name":"Holtkamp","first_name":"Pia Katharina","full_name":"Holtkamp, Pia Katharina","id":"44935"},{"id":"66459","full_name":"Kappe, Fabian","last_name":"Kappe","first_name":"Fabian"},{"full_name":"Probst, Paula","last_name":"Probst","first_name":"Paula"},{"id":"7850","last_name":"Bobbert","first_name":"Mathias","full_name":"Bobbert, Mathias"},{"orcid":"0000-0002-2763-1246","last_name":"Meschut","first_name":"Gerson","full_name":"Meschut, Gerson","id":"32056"}],"year":"2025","status":"public","title":"Investigation of local heat treatment strategies for a multi-range capable rivet and the influence on joint formation and load-bearing capacity","doi":"10.1177/14644207241307508","user_id":"44935","_id":"58495","language":[{"iso":"eng"}],"publisher":"SAGE Publications"},{"citation":{"chicago":"Wehde, Janis. “Determinanten Der Politischen Involviertheit von Lehramtsstudierenden Und Damit Verbundene Implikationen Für Die Lehrer*innenbildung,” 2025.","ama":"Wehde J. Determinanten der politischen Involviertheit von Lehramtsstudierenden und damit verbundene Implikationen für die Lehrer*innenbildung. In: ; 2025.","short":"J. Wehde, in: 2025.","bibtex":"@inproceedings{Wehde_2025, title={Determinanten der politischen Involviertheit von Lehramtsstudierenden und damit verbundene Implikationen für die Lehrer*innenbildung}, author={Wehde, Janis}, year={2025} }","mla":"Wehde, Janis. <i>Determinanten Der Politischen Involviertheit von Lehramtsstudierenden Und Damit Verbundene Implikationen Für Die Lehrer*innenbildung</i>. 2025.","apa":"Wehde, J. (2025). <i>Determinanten der politischen Involviertheit von Lehramtsstudierenden und damit verbundene Implikationen für die Lehrer*innenbildung</i>. Jahrestagung der GEBF, Mannheim.","ieee":"J. Wehde, “Determinanten der politischen Involviertheit von Lehramtsstudierenden und damit verbundene Implikationen für die Lehrer*innenbildung,” presented at the Jahrestagung der GEBF, Mannheim, 2025."},"quality_controlled":"1","project":[{"name":"DemoKult: DemoKult – Die unterrichtsbezogene Förderung von Kompetenzen für eine demokratische Kultur","_id":"1042"}],"date_created":"2025-02-03T14:28:27Z","type":"conference","department":[{"_id":"4"},{"_id":"456"}],"title":"Determinanten der politischen Involviertheit von Lehramtsstudierenden und damit verbundene Implikationen für die Lehrer*innenbildung","status":"public","year":"2025","author":[{"id":"82257","last_name":"Wehde","first_name":"Janis","orcid":"0009-0008-0720-7828","full_name":"Wehde, Janis"}],"conference":{"end_date":"2025-01-29","start_date":"2025-01-27","name":"Jahrestagung der GEBF","location":"Mannheim"},"date_updated":"2025-02-03T14:28:46Z","language":[{"iso":"eng"}],"_id":"58498","user_id":"82257"},{"article_number":"55","main_file_link":[{"open_access":"1","url":"https://www.mdpi.com/2076-0825/14/2/55"}],"language":[{"iso":"eng"}],"doi":"10.3390/act14020055","year":"2025","title":"Lead-Free Ceramics in Prestressed Ultrasonic Transducers","author":[{"full_name":"Scheidemann, Claus","last_name":"Scheidemann","first_name":"Claus","id":"38259"},{"full_name":"Bornmann, Peter","first_name":"Peter","last_name":"Bornmann"},{"first_name":"Walter","last_name":"Littmann","full_name":"Littmann, Walter"},{"full_name":"Hemsel, Tobias","last_name":"Hemsel","first_name":"Tobias","id":"210"}],"publication_identifier":{"issn":["2076-0825"]},"publication_status":"published","date_updated":"2025-02-04T13:46:41Z","article_type":"original","intvolume":"        14","date_created":"2025-02-04T13:43:23Z","type":"journal_article","department":[{"_id":"151"}],"publication":"Actuators","issue":"2","abstract":[{"text":"<jats:p>Today’s ultrasonic transducers find broad application in diverse technology branches and most often cannot be replaced by other actuators. They are typically based on lead-containing piezoelectric ceramics. These should be replaced for environmental and health issues by lead-free alternatives. Multiple material alternatives are already known, but there is a lack of information about their technological readiness level. To fill this gap, a small series of prestressed longitudinally vibrating transducers was set up with a standard PZT material and two lead-free variants within this study. The entire process for building the transducers is documented: characteristics of individual ring ceramics, burn-in results, and free vibration and characteristics under load are shown. The main result is that the investigated lead-free materials are ready to use within ultrasonic bolted Langevin transducers (BLTs) for medium-power applications, when the geometrical setup of the transducer is adopted. Since lead-free ceramics need higher voltages to achieve the same power level, the driving electronics or the mechanical setup must be altered specifically for each material. Lower self-heating of the lead-free materials might be attractive for heat-sensitive processes.</jats:p>","lang":"eng"}],"_id":"58510","publisher":"MDPI AG","user_id":"210","volume":14,"status":"public","oa":"1","citation":{"short":"C. Scheidemann, P. Bornmann, W. Littmann, T. Hemsel, Actuators 14 (2025).","ama":"Scheidemann C, Bornmann P, Littmann W, Hemsel T. Lead-Free Ceramics in Prestressed Ultrasonic Transducers. <i>Actuators</i>. 2025;14(2). doi:<a href=\"https://doi.org/10.3390/act14020055\">10.3390/act14020055</a>","chicago":"Scheidemann, Claus, Peter Bornmann, Walter Littmann, and Tobias Hemsel. “Lead-Free Ceramics in Prestressed Ultrasonic Transducers.” <i>Actuators</i> 14, no. 2 (2025). <a href=\"https://doi.org/10.3390/act14020055\">https://doi.org/10.3390/act14020055</a>.","bibtex":"@article{Scheidemann_Bornmann_Littmann_Hemsel_2025, title={Lead-Free Ceramics in Prestressed Ultrasonic Transducers}, volume={14}, DOI={<a href=\"https://doi.org/10.3390/act14020055\">10.3390/act14020055</a>}, number={255}, journal={Actuators}, publisher={MDPI AG}, author={Scheidemann, Claus and Bornmann, Peter and Littmann, Walter and Hemsel, Tobias}, year={2025} }","mla":"Scheidemann, Claus, et al. “Lead-Free Ceramics in Prestressed Ultrasonic Transducers.” <i>Actuators</i>, vol. 14, no. 2, 55, MDPI AG, 2025, doi:<a href=\"https://doi.org/10.3390/act14020055\">10.3390/act14020055</a>.","apa":"Scheidemann, C., Bornmann, P., Littmann, W., &#38; Hemsel, T. (2025). Lead-Free Ceramics in Prestressed Ultrasonic Transducers. <i>Actuators</i>, <i>14</i>(2), Article 55. <a href=\"https://doi.org/10.3390/act14020055\">https://doi.org/10.3390/act14020055</a>","ieee":"C. Scheidemann, P. Bornmann, W. Littmann, and T. Hemsel, “Lead-Free Ceramics in Prestressed Ultrasonic Transducers,” <i>Actuators</i>, vol. 14, no. 2, Art. no. 55, 2025, doi: <a href=\"https://doi.org/10.3390/act14020055\">10.3390/act14020055</a>."},"quality_controlled":"1"},{"date_created":"2025-01-15T14:12:34Z","department":[{"_id":"35"},{"_id":"2"},{"_id":"307"}],"type":"journal_article","publication":"ChemPhysChem","abstract":[{"lang":"eng","text":"Zinc tin oxide (ZTO) is investigated as a photoluminescent sensor for oxygen (O2); chemisorbed oxygen quenches the luminescence intensity. At the same time, ZTO is also studied as a resistive sensor; being an n‐type semiconductor, its electrical conductance decreases by adsorption of oxygen. Both phenomena can be exploited for quantitative O2 sensing. The respective sensor responses can be described by the same modified Stern‐Volmer model that distinguishes between accessible and non‐accessible luminescence centers or charge carriers, respectively. The impact of the temperature is studied in the range from room temperature up to 150 °C."}],"language":[{"iso":"eng"}],"main_file_link":[{"open_access":"1"}],"doi":"10.1002/cphc.202400984","author":[{"first_name":"Linda","last_name":"Kothe","full_name":"Kothe, Linda"},{"first_name":"Josefin","last_name":"Klippstein","full_name":"Klippstein, Josefin"},{"first_name":"Marvin","last_name":"Kloß","full_name":"Kloß, Marvin"},{"full_name":"Wengenroth, Marc","last_name":"Wengenroth","first_name":"Marc"},{"last_name":"Poeplau","first_name":"Michael","full_name":"Poeplau, Michael"},{"last_name":"Ester","first_name":"Stephan","full_name":"Ester, Stephan"},{"id":"23547","full_name":"Tiemann, Michael","first_name":"Michael","orcid":"0000-0003-1711-2722","last_name":"Tiemann"}],"publication_identifier":{"issn":["1439-4235","1439-7641"]},"year":"2025","title":"Oxygen‐dependent Photoluminescence and Electrical Conductance of Zinc Tin Oxide (ZTO): A Modified Stern‐Volmer Description","intvolume":"        26","article_type":"original","date_updated":"2025-04-04T06:20:07Z","publication_status":"published","oa":"1","citation":{"mla":"Kothe, Linda, et al. “Oxygen‐dependent Photoluminescence and Electrical Conductance of Zinc Tin Oxide (ZTO): A Modified Stern‐Volmer Description.” <i>ChemPhysChem</i>, vol. 26, Wiley, 2025, p. e202400984, doi:<a href=\"https://doi.org/10.1002/cphc.202400984\">10.1002/cphc.202400984</a>.","ama":"Kothe L, Klippstein J, Kloß M, et al. Oxygen‐dependent Photoluminescence and Electrical Conductance of Zinc Tin Oxide (ZTO): A Modified Stern‐Volmer Description. <i>ChemPhysChem</i>. 2025;26:e202400984. doi:<a href=\"https://doi.org/10.1002/cphc.202400984\">10.1002/cphc.202400984</a>","bibtex":"@article{Kothe_Klippstein_Kloß_Wengenroth_Poeplau_Ester_Tiemann_2025, title={Oxygen‐dependent Photoluminescence and Electrical Conductance of Zinc Tin Oxide (ZTO): A Modified Stern‐Volmer Description}, volume={26}, DOI={<a href=\"https://doi.org/10.1002/cphc.202400984\">10.1002/cphc.202400984</a>}, journal={ChemPhysChem}, publisher={Wiley}, author={Kothe, Linda and Klippstein, Josefin and Kloß, Marvin and Wengenroth, Marc and Poeplau, Michael and Ester, Stephan and Tiemann, Michael}, year={2025}, pages={e202400984} }","apa":"Kothe, L., Klippstein, J., Kloß, M., Wengenroth, M., Poeplau, M., Ester, S., &#38; Tiemann, M. (2025). Oxygen‐dependent Photoluminescence and Electrical Conductance of Zinc Tin Oxide (ZTO): A Modified Stern‐Volmer Description. <i>ChemPhysChem</i>, <i>26</i>, e202400984. <a href=\"https://doi.org/10.1002/cphc.202400984\">https://doi.org/10.1002/cphc.202400984</a>","ieee":"L. Kothe <i>et al.</i>, “Oxygen‐dependent Photoluminescence and Electrical Conductance of Zinc Tin Oxide (ZTO): A Modified Stern‐Volmer Description,” <i>ChemPhysChem</i>, vol. 26, p. e202400984, 2025, doi: <a href=\"https://doi.org/10.1002/cphc.202400984\">10.1002/cphc.202400984</a>.","short":"L. Kothe, J. Klippstein, M. Kloß, M. Wengenroth, M. Poeplau, S. Ester, M. Tiemann, ChemPhysChem 26 (2025) e202400984.","chicago":"Kothe, Linda, Josefin Klippstein, Marvin Kloß, Marc Wengenroth, Michael Poeplau, Stephan Ester, and Michael Tiemann. “Oxygen‐dependent Photoluminescence and Electrical Conductance of Zinc Tin Oxide (ZTO): A Modified Stern‐Volmer Description.” <i>ChemPhysChem</i> 26 (2025): e202400984. <a href=\"https://doi.org/10.1002/cphc.202400984\">https://doi.org/10.1002/cphc.202400984</a>."},"quality_controlled":"1","publisher":"Wiley","_id":"58193","page":"e202400984","volume":26,"user_id":"23547","status":"public"},{"oa":"1","quality_controlled":"1","citation":{"short":"M.S. Feser, A.B. Bauer, European Journal of Physics (2025).","chicago":"Feser, Markus Sebastian, and Anna Brigitte Bauer. “From Belonging to Success: Evaluating the Influence of Sense of Belonging to Physics on First-Year University Students’ Academic Outcomes and the Benefits of a Holistic Support Program.” <i>European Journal of Physics</i>, 2025. <a href=\"https://doi.org/10.1088/1361-6404/adca13\">https://doi.org/10.1088/1361-6404/adca13</a>.","apa":"Feser, M. S., &#38; Bauer, A. B. (2025). From belonging to success: Evaluating the influence of sense of belonging to physics on first-year university students’ academic outcomes and the benefits of a holistic support program. <i>European Journal of Physics</i>. <a href=\"https://doi.org/10.1088/1361-6404/adca13\">https://doi.org/10.1088/1361-6404/adca13</a>","ieee":"M. S. Feser and A. B. Bauer, “From belonging to success: Evaluating the influence of sense of belonging to physics on first-year university students’ academic outcomes and the benefits of a holistic support program,” <i>European Journal of Physics</i>, 2025, doi: <a href=\"https://doi.org/10.1088/1361-6404/adca13\">10.1088/1361-6404/adca13</a>.","ama":"Feser MS, Bauer AB. From belonging to success: Evaluating the influence of sense of belonging to physics on first-year university students’ academic outcomes and the benefits of a holistic support program. <i>European Journal of Physics</i>. Published online 2025. doi:<a href=\"https://doi.org/10.1088/1361-6404/adca13\">10.1088/1361-6404/adca13</a>","bibtex":"@article{Feser_Bauer_2025, title={From belonging to success: Evaluating the influence of sense of belonging to physics on first-year university students’ academic outcomes and the benefits of a holistic support program}, DOI={<a href=\"https://doi.org/10.1088/1361-6404/adca13\">10.1088/1361-6404/adca13</a>}, journal={European Journal of Physics}, publisher={IOP Publishing}, author={Feser, Markus Sebastian and Bauer, Anna Brigitte}, year={2025} }","mla":"Feser, Markus Sebastian, and Anna Brigitte Bauer. “From Belonging to Success: Evaluating the Influence of Sense of Belonging to Physics on First-Year University Students’ Academic Outcomes and the Benefits of a Holistic Support Program.” <i>European Journal of Physics</i>, IOP Publishing, 2025, doi:<a href=\"https://doi.org/10.1088/1361-6404/adca13\">10.1088/1361-6404/adca13</a>."},"user_id":"24755","_id":"59416","publisher":"IOP Publishing","status":"public","type":"journal_article","department":[{"_id":"299"}],"date_created":"2025-04-08T06:32:20Z","abstract":[{"lang":"eng","text":"<jats:title>Abstract</jats:title>\r\n               <jats:p>The present study explored the role of first-year physics students’ sense of belonging to physics and how it relates to their learning progression in higher education-level physics. Conducted at Paderborn University, this study examined how students’ sense of belonging to physics influences their academic outcomes in an introductory experimental physics course. Additionally, we investigated how physics students’ engagement in the Physiktreff—a holistic support program for first-year physics students to help them cope with academic and social challenges during their studies—impacts the development of their sense of belonging to physics over time. Our findings indicated that students with a stronger sense of belonging to physics performed better academically. Moreover, students who actively participated in the support program experienced a positive shift in their sense of belonging to physics. However, our findings also revealed that physics students with a higher initial sense of belonging to physics tended to experience a decline in their sense of belonging to physics during their first semester. These results underscore the importance of fostering a sense of belonging to physics within higher education, particularly during the introductory phase of students’ studies.&amp;#xD;</jats:p>"}],"publication":"European Journal of Physics","doi":"10.1088/1361-6404/adca13","main_file_link":[{"open_access":"1","url":"https://iopscience.iop.org/article/10.1088/1361-6404/adca13"}],"language":[{"iso":"eng"}],"publication_status":"published","date_updated":"2025-04-08T06:35:04Z","article_type":"original","title":"From belonging to success: Evaluating the influence of sense of belonging to physics on first-year university students’ academic outcomes and the benefits of a holistic support program","year":"2025","publication_identifier":{"issn":["0143-0807","1361-6404"]},"author":[{"last_name":"Feser","first_name":"Markus Sebastian","full_name":"Feser, Markus Sebastian"},{"full_name":"Bauer, Anna Brigitte","first_name":"Anna Brigitte","orcid":"0000-0002-1742-3099","last_name":"Bauer","id":"24755"}]},{"publication":"Tod und Trauer – digital/analog","abstract":[{"text":"Stets haben menschliche Gemeinschaften versucht, dem nahenden, sichvollziehenden sowie geschehenen Tod zu begegnen und dabei kommunikativePraktiken ausgebildet, die für die Zwecke der Todes- und Trauerverarbeitung zumEinsatz kommen. Die Erfassung und Reflexion dieser Praktiken ist Thema diesesBeitrags, in dem die extremen kommunikativen Ränder des sprachlichen Erfassensvon Tod sowie des performativen Vollziehens von Trauer während der Shoa reflek-tiert werden sollen. Als Grundlage dienen textuelle Kommunikate des Gettos Litz-mannstadt der Jahre 1941 bis 1944. Gefragt werden soll nach Mustern des Anzeigensvon Tod, Musteranschlüssen anhand von Personifikationen und Metaphorisierun-gen des Todes und nach Musterabbrüchen als Formen des Nicht-(Mehr)-Ausdrücken-Könnens.","lang":"ger"}],"date_created":"2025-04-09T10:48:20Z","type":"book_chapter","keyword":["Gettokommunikation","Gettokommunikate","kommunikative Praktiken","Shoa","Unsagbarkeit"],"year":"2025","title":"„Der Tod tritt an jede Pritsche, an jede zerschlagene Fensterscheibe heran und fragt: 'Wann darf ich kommen?'“. Möglichkeiten und Grenzen des Sprechens über Tod und des sprachlichen Vollzugs von Trauer in Textkommunikaten des Gettos Litzmannstadt","author":[{"last_name":"Markewitz","first_name":"Friedrich","full_name":"Markewitz, Friedrich","id":"67227"}],"publication_identifier":{"unknown":["9783111636078"]},"publication_status":"published","date_updated":"2025-04-09T10:48:24Z","intvolume":"        66","main_file_link":[{"url":"http://doi.org/10.1515/9783111636108-003","open_access":"1"}],"language":[{"iso":"ger"}],"series_title":"Sprache und Wissen","doi":"http://doi.org/10.1515/9783111636108-003","citation":{"short":"F. Markewitz, in: K. Frick, L. Gröbel, C. Siever (Eds.), Tod und Trauer – digital/analog, Walter de Gruyter, Berlin/Boston, 2025, pp. 29–50.","chicago":"Markewitz, Friedrich. “„Der Tod tritt an jede Pritsche, an jede zerschlagene Fensterscheibe heran und fragt: ‘Wann darf ich kommen?’“. Möglichkeiten und Grenzen des Sprechens über Tod und des sprachlichen Vollzugs von Trauer in Textkommunikaten des Gettos Litzmannstadt.” In <i>Tod und Trauer – digital/analog</i>, edited by Karina Frick, Lea Gröbel, and Christina Siever, 66:29–50. Sprache und Wissen. Berlin/Boston: Walter de Gruyter, 2025. <a href=\"https://doi.org/10.1515/9783111636108-003\">https://doi.org/10.1515/9783111636108-003</a>.","apa":"Markewitz, F. (2025). „Der Tod tritt an jede Pritsche, an jede zerschlagene Fensterscheibe heran und fragt: “Wann darf ich kommen?”“. Möglichkeiten und Grenzen des Sprechens über Tod und des sprachlichen Vollzugs von Trauer in Textkommunikaten des Gettos Litzmannstadt. In K. Frick, L. Gröbel, &#38; C. Siever (Eds.), <i>Tod und Trauer – digital/analog</i> (Vol. 66, pp. 29–50). Walter de Gruyter. <a href=\"https://doi.org/10.1515/9783111636108-003\">https://doi.org/10.1515/9783111636108-003</a>","ieee":"F. Markewitz, “„Der Tod tritt an jede Pritsche, an jede zerschlagene Fensterscheibe heran und fragt: ‘Wann darf ich kommen?’“. Möglichkeiten und Grenzen des Sprechens über Tod und des sprachlichen Vollzugs von Trauer in Textkommunikaten des Gettos Litzmannstadt,” in <i>Tod und Trauer – digital/analog</i>, vol. 66, K. Frick, L. Gröbel, and C. Siever, Eds. Berlin/Boston: Walter de Gruyter, 2025, pp. 29–50.","ama":"Markewitz F. „Der Tod tritt an jede Pritsche, an jede zerschlagene Fensterscheibe heran und fragt: “Wann darf ich kommen?”“. Möglichkeiten und Grenzen des Sprechens über Tod und des sprachlichen Vollzugs von Trauer in Textkommunikaten des Gettos Litzmannstadt. In: Frick K, Gröbel L, Siever C, eds. <i>Tod und Trauer – digital/analog</i>. Vol 66. Sprache und Wissen. Walter de Gruyter; 2025:29-50. doi:<a href=\"http://doi.org/10.1515/9783111636108-003\">http://doi.org/10.1515/9783111636108-003</a>","bibtex":"@inbook{Markewitz_2025, place={Berlin/Boston}, series={Sprache und Wissen}, title={„Der Tod tritt an jede Pritsche, an jede zerschlagene Fensterscheibe heran und fragt: “Wann darf ich kommen?”“. Möglichkeiten und Grenzen des Sprechens über Tod und des sprachlichen Vollzugs von Trauer in Textkommunikaten des Gettos Litzmannstadt}, volume={66}, DOI={<a href=\"http://doi.org/10.1515/9783111636108-003\">http://doi.org/10.1515/9783111636108-003</a>}, booktitle={Tod und Trauer – digital/analog}, publisher={Walter de Gruyter}, author={Markewitz, Friedrich}, editor={Frick, Karina and Gröbel, Lea and Siever, Christina}, year={2025}, pages={29–50}, collection={Sprache und Wissen} }","mla":"Markewitz, Friedrich. “„Der Tod tritt an jede Pritsche, an jede zerschlagene Fensterscheibe heran und fragt: ‘Wann darf ich kommen?’“. Möglichkeiten und Grenzen des Sprechens über Tod und des sprachlichen Vollzugs von Trauer in Textkommunikaten des Gettos Litzmannstadt.” <i>Tod und Trauer – digital/analog</i>, edited by Karina Frick et al., vol. 66, Walter de Gruyter, 2025, pp. 29–50, doi:<a href=\"http://doi.org/10.1515/9783111636108-003\">http://doi.org/10.1515/9783111636108-003</a>."},"quality_controlled":"1","place":"Berlin/Boston","oa":"1","status":"public","page":"29-50","_id":"59451","publisher":"Walter de Gruyter","user_id":"67227","volume":66,"editor":[{"full_name":"Frick, Karina","first_name":"Karina","last_name":"Frick"},{"last_name":"Gröbel","first_name":"Lea","full_name":"Gröbel, Lea"},{"last_name":"Siever","first_name":"Christina","full_name":"Siever, Christina"}]},{"user_id":"67227","volume":16,"_id":"59452","publisher":"Walter de Gruyter","status":"public","quality_controlled":"1","citation":{"apa":"Markewitz, F. (2025). Heideggers Schweigen zur Shoa. Kommunikationsanalytische Reflexionen auf das invektive Potential von Schweigen. <i>Glottotheory</i>, <i>16</i>(1).","ieee":"F. Markewitz, “Heideggers Schweigen zur Shoa. Kommunikationsanalytische Reflexionen auf das invektive Potential von Schweigen,” <i>Glottotheory</i>, vol. 16, no. 1, 2025.","short":"F. Markewitz, Glottotheory 16 (2025).","chicago":"Markewitz, Friedrich. “Heideggers Schweigen zur Shoa. Kommunikationsanalytische Reflexionen auf das invektive Potential von Schweigen.” <i>Glottotheory</i> 16, no. 1 (2025).","mla":"Markewitz, Friedrich. “Heideggers Schweigen zur Shoa. Kommunikationsanalytische Reflexionen auf das invektive Potential von Schweigen.” <i>Glottotheory</i>, vol. 16, no. 1, Walter de Gruyter, 2025.","ama":"Markewitz F. Heideggers Schweigen zur Shoa. Kommunikationsanalytische Reflexionen auf das invektive Potential von Schweigen. <i>Glottotheory</i>. 2025;16(1).","bibtex":"@article{Markewitz_2025, title={Heideggers Schweigen zur Shoa. Kommunikationsanalytische Reflexionen auf das invektive Potential von Schweigen}, volume={16}, number={1}, journal={Glottotheory}, publisher={Walter de Gruyter}, author={Markewitz, Friedrich}, year={2025} }"},"main_file_link":[{"url":"https://www.degruyterbrill.com/document/doi/10.1515/glot-2025-2002/html"}],"language":[{"iso":"ger"}],"date_updated":"2025-04-09T10:51:19Z","publication_status":"epub_ahead","intvolume":"        16","article_type":"original","year":"2025","title":"Heideggers Schweigen zur Shoa. Kommunikationsanalytische Reflexionen auf das invektive Potential von Schweigen","author":[{"last_name":"Markewitz","first_name":"Friedrich","full_name":"Markewitz, Friedrich","id":"67227"}],"type":"journal_article","keyword":["Heidegger","Schweigen","Invektivität","Shoa"],"date_created":"2025-04-09T10:50:52Z","abstract":[{"text":"Ausgehend von der Konzeptualisierung der Shoa als kommunikativem Extremfall erweist sich nicht nur das erzwungene Schweigen jüdischer Shoa-Opfer und -Überlebender als so konstitutiv wie herausforderungsvoll, sondern ebenso das täterseitige Schweigen, als z.B. ein Die-eigene-Schuld-ignorieren-Wollen. Aber ebenso irritierend anmutende Formen des Schweigens indirekt zustimmender oder zumindest wegsehender Mitglieder der Integrierten Gesellschaft während und nach dem ‚Dritten Reich‘ sind in ihrer ethisch-normativen Eingebundenheit problematisch und zugleich bedenkenswert. So herausgehoben wie auffällig erscheint aus dieser Akteursgruppe der deutsche Philosoph Martin Heidegger, hätte dieser doch bis zu seinem Tod 1976 durchaus Gelegenheit gehabt, sich zum Zivilisationsbruch der Shoa zu äußern. Doch hat er, zumindest öffentlich, stets dazu geschwiegen. Dieses Schweigen soll im Rahmen dieses Beitrages hinsichtlich seines invektiven Potentials und in Bezug zu Heideggers eigenen (philosophischen) Ausführungen zum Schweigen reflektiert werden. Damit will der Beitrag zu einer linguistischen Aufarbeitung des Kommunikationsverhaltens Heideggers, der Ausdifferenzierung einer diskurslinguistischen Invektivitätsforschung und der Analyse des Kommunikationsphänomens ‚Schweigen‘ beitragen.","lang":"ger"}],"issue":"1","publication":"Glottotheory"},{"title":"Data Quality in the Engineering of Circular Products - Decision support for circular value creation through data ecosystems","year":"2025","publication_identifier":{"issn":["2942-6170"]},"author":[{"id":"47565","full_name":"Gräßler, Iris","first_name":"Iris","last_name":"Gräßler","orcid":"0000-0001-5765-971X"},{"full_name":"Rarbach, Sven","first_name":"Sven","last_name":"Rarbach","id":"67999"},{"orcid":"http://orcid.org/0000-0001-8778-2989","last_name":"Pottebaum","first_name":"Jens","full_name":"Pottebaum, Jens","id":"405"}],"date_updated":"2025-04-10T08:04:33Z","publication_status":"published","intvolume":"      2025","main_file_link":[{"url":"https://doi.org/10.30844/I4SE.25.2.12","open_access":"1"}],"language":[{"iso":"eng"}],"doi":"10.30844/i4se.25.2.12","issue":"2","publication":"Industry 4.0 Science","date_created":"2025-04-10T08:03:11Z","type":"journal_article","department":[{"_id":"152"}],"status":"public","publisher":"GITO mbH Verlag","_id":"59478","user_id":"67999","volume":2025,"citation":{"short":"I. Gräßler, S. Rarbach, J. Pottebaum, Industry 4.0 Science 2025 (2025).","chicago":"Gräßler, Iris, Sven Rarbach, and Jens Pottebaum. “Data Quality in the Engineering of Circular Products - Decision Support for Circular Value Creation through Data Ecosystems.” <i>Industry 4.0 Science</i> 2025, no. 2 (2025). <a href=\"https://doi.org/10.30844/i4se.25.2.12\">https://doi.org/10.30844/i4se.25.2.12</a>.","apa":"Gräßler, I., Rarbach, S., &#38; Pottebaum, J. (2025). Data Quality in the Engineering of Circular Products - Decision support for circular value creation through data ecosystems. <i>Industry 4.0 Science</i>, <i>2025</i>(2). <a href=\"https://doi.org/10.30844/i4se.25.2.12\">https://doi.org/10.30844/i4se.25.2.12</a>","ieee":"I. Gräßler, S. Rarbach, and J. Pottebaum, “Data Quality in the Engineering of Circular Products - Decision support for circular value creation through data ecosystems,” <i>Industry 4.0 Science</i>, vol. 2025, no. 2, 2025, doi: <a href=\"https://doi.org/10.30844/i4se.25.2.12\">10.30844/i4se.25.2.12</a>.","ama":"Gräßler I, Rarbach S, Pottebaum J. Data Quality in the Engineering of Circular Products - Decision support for circular value creation through data ecosystems. <i>Industry 40 Science</i>. 2025;2025(2). doi:<a href=\"https://doi.org/10.30844/i4se.25.2.12\">10.30844/i4se.25.2.12</a>","bibtex":"@article{Gräßler_Rarbach_Pottebaum_2025, title={Data Quality in the Engineering of Circular Products - Decision support for circular value creation through data ecosystems}, volume={2025}, DOI={<a href=\"https://doi.org/10.30844/i4se.25.2.12\">10.30844/i4se.25.2.12</a>}, number={2}, journal={Industry 4.0 Science}, publisher={GITO mbH Verlag}, author={Gräßler, Iris and Rarbach, Sven and Pottebaum, Jens}, year={2025} }","mla":"Gräßler, Iris, et al. “Data Quality in the Engineering of Circular Products - Decision Support for Circular Value Creation through Data Ecosystems.” <i>Industry 4.0 Science</i>, vol. 2025, no. 2, GITO mbH Verlag, 2025, doi:<a href=\"https://doi.org/10.30844/i4se.25.2.12\">10.30844/i4se.25.2.12</a>."},"quality_controlled":"1","oa":"1"},{"project":[{"grant_number":"418701707","_id":"130","name":"TRR 285: TRR 285:  Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten"},{"name":"TRR 285 - C: TRR 285 - Project Area C","_id":"133"},{"name":"TRR 285 – C04: TRR 285 - Subproject C04","_id":"148"}],"quality_controlled":"1","citation":{"bibtex":"@inproceedings{Reschke_Brosius_2025, title={Transient dynamic analysis: Performance evaluation of tactile measurement}, volume={52}, DOI={<a href=\"https://doi.org/10.21741/9781644903551-36\">10.21741/9781644903551-36</a>}, booktitle={Materials Research Proceedings}, publisher={Materials Research Forum LLC}, author={Reschke, Gregor and Brosius, Alexander}, year={2025}, pages={293–300} }","ama":"Reschke G, Brosius A. Transient dynamic analysis: Performance evaluation of tactile measurement. In: <i>Materials Research Proceedings</i>. Vol 52. Materials Research Forum LLC; 2025:293-300. doi:<a href=\"https://doi.org/10.21741/9781644903551-36\">10.21741/9781644903551-36</a>","mla":"Reschke, Gregor, and Alexander Brosius. “Transient Dynamic Analysis: Performance Evaluation of Tactile Measurement.” <i>Materials Research Proceedings</i>, vol. 52, Materials Research Forum LLC, 2025, pp. 293–300, doi:<a href=\"https://doi.org/10.21741/9781644903551-36\">10.21741/9781644903551-36</a>.","chicago":"Reschke, Gregor, and Alexander Brosius. “Transient Dynamic Analysis: Performance Evaluation of Tactile Measurement.” In <i>Materials Research Proceedings</i>, 52:293–300. Materials Research Forum LLC, 2025. <a href=\"https://doi.org/10.21741/9781644903551-36\">https://doi.org/10.21741/9781644903551-36</a>.","short":"G. Reschke, A. Brosius, in: Materials Research Proceedings, Materials Research Forum LLC, 2025, pp. 293–300.","ieee":"G. Reschke and A. Brosius, “Transient dynamic analysis: Performance evaluation of tactile measurement,” in <i>Materials Research Proceedings</i>, Paderborn, 2025, vol. 52, pp. 293–300, doi: <a href=\"https://doi.org/10.21741/9781644903551-36\">10.21741/9781644903551-36</a>.","apa":"Reschke, G., &#38; Brosius, A. (2025). Transient dynamic analysis: Performance evaluation of tactile measurement. <i>Materials Research Proceedings</i>, <i>52</i>, 293–300. <a href=\"https://doi.org/10.21741/9781644903551-36\">https://doi.org/10.21741/9781644903551-36</a>"},"conference":{"end_date":"2025-04-03","name":"21st SheMet Conference","start_date":"2025-04-01","location":"Paderborn"},"status":"public","volume":52,"user_id":"98812","_id":"59483","publisher":"Materials Research Forum LLC","page":"293-300","abstract":[{"text":"<jats:p>Abstract. The assessment of mechanically joined connections, such as clinched connections, is usually conducted destructively. Applicable non-destructive testing methods like computed tomography are time-consuming and costly, or, like electrical resistance measurement, provide only a limited amount of information. A fast, non-destructive evaluation of the joints condition shall be made possible by using transient dynamic analysis (TDA). It is based on the introduction of sound waves and the evaluation of the response behavior after passing through the structure. This study focuses the application of TDA to clinched shear connections to evaluate the performance of the tactile measuring setup. Twenty-one series were investigated, covering variations in joining task, manufacturing and defect. The evaluation was carried out using machine learning to determine for which series characteristic signals may be detected. It was shown that a classification of the investigated specimens is possible, whereby the classification accuracy depends on the examined variation. Furthermore, the accuracy was evaluated as a function of frequency and results were concluded to identify the limits of the used measuring setup.</jats:p>","lang":"eng"}],"publication":"Materials Research Proceedings","department":[{"_id":"43"},{"_id":"157"}],"type":"conference","keyword":["Joining","Machine Learning","Transient Dynamic Analysis"],"date_created":"2025-04-10T11:27:20Z","intvolume":"        52","publication_status":"published","date_updated":"2025-04-10T11:33:28Z","author":[{"full_name":"Reschke, Gregor","last_name":"Reschke","first_name":"Gregor"},{"full_name":"Brosius, Alexander","last_name":"Brosius","first_name":"Alexander"}],"publication_identifier":{"issn":["2474-395X"]},"year":"2025","title":"Transient dynamic analysis: Performance evaluation of tactile measurement","doi":"10.21741/9781644903551-36","language":[{"iso":"eng"}]},{"language":[{"iso":"ger"}],"main_file_link":[{"open_access":"1","url":"https://schule-verantworten.education/journal/index.php/sv/issue/view/19/20"}],"author":[{"last_name":"Schlierkamp","first_name":"Marie Luise","full_name":"Schlierkamp, Marie Luise","id":"80212"}],"publication_identifier":{"issn":["2791-4046"]},"year":"2025","title":"Disability im schulischen Kontext. Über den Umgang von Lehrpersonen","article_type":"original","intvolume":"         5","publication_status":"published","date_updated":"2025-04-23T11:33:57Z","date_created":"2025-04-23T11:28:54Z","file":[{"date_updated":"2025-04-23T11:26:00Z","relation":"main_file","access_level":"closed","file_size":202706,"file_name":"12_Schlierkamp.pdf","success":1,"content_type":"application/pdf","file_id":"59654","creator":"maries1","date_created":"2025-04-23T11:26:00Z"}],"department":[{"_id":"20"}],"type":"journal_article","keyword":["Inklusion","Disability","Umgang mit Diversität und Vielfalt im Kontext Beeinträchtigungen"],"publication":"#schuleverantworten","license":"https://creativecommons.org/licenses/by-nc-nd/3.0/","abstract":[{"lang":"ger","text":"Spätestens seit der Ratifizierung der UN-Behindertenrechtskonvention und der Formulierung der Men­schenrechte ist ein Bekenntnis zur Inklusion ein zentrales Thema in der Schule, in der Ausbildung an­gehender Lehrkräfte und in der Bildungspolitik. Der Umgang mit Kindern und Jugendlichen mit und ohne Beeinträchtigung in einer heterogenen Klassengemeinschaft einer Regelschule kann Herausfor­derungen im beruflichen Alltag einer Lehrperson mit sich bringen. Da inklusive schulische Bildung ebenso wie der Anspruch auf Teilhabe in der Gesellschaft zwei Rechte sind, die alle Personen der Ge­sellschaft einfordern dürfen, bedarf es neben einer positiven Haltung gegenüber Diversität und Vielfalt auch bestimmten Rahmenbedingungen, um unterschiedlichen Bedarfen von Schüler*innen mit Beein­trächtigungen gerecht zu werden."}],"_id":"59653","page":"120-124","volume":5,"user_id":"80212","ddc":["370"],"status":"public","has_accepted_license":"1","oa":"1","citation":{"mla":"Schlierkamp, Marie Luise. “Disability im schulischen Kontext. Über den Umgang von Lehrpersonen.” <i>#schuleverantworten</i>, vol. 5, 2025, pp. 120–24.","bibtex":"@article{Schlierkamp_2025, title={Disability im schulischen Kontext. Über den Umgang von Lehrpersonen}, volume={5}, journal={#schuleverantworten}, author={Schlierkamp, Marie Luise}, year={2025}, pages={120–124} }","ama":"Schlierkamp ML. Disability im schulischen Kontext. Über den Umgang von Lehrpersonen. <i>#schuleverantworten</i>. 2025;5:120-124.","ieee":"M. L. Schlierkamp, “Disability im schulischen Kontext. Über den Umgang von Lehrpersonen,” <i>#schuleverantworten</i>, vol. 5, pp. 120–124, 2025.","apa":"Schlierkamp, M. L. (2025). Disability im schulischen Kontext. Über den Umgang von Lehrpersonen. <i>#schuleverantworten</i>, <i>5</i>, 120–124.","short":"M.L. Schlierkamp, #schuleverantworten 5 (2025) 120–124.","chicago":"Schlierkamp, Marie Luise. “Disability im schulischen Kontext. Über den Umgang von Lehrpersonen.” <i>#schuleverantworten</i> 5 (2025): 120–24."},"file_date_updated":"2025-04-23T11:26:00Z","quality_controlled":"1"},{"quality_controlled":"1","project":[{"name":"Der Begriff der \"Religion\" in der Frühen Neuzeit","_id":"1114"}],"citation":{"short":"J. Süßmann, in: D. Weltecke (Ed.), Religiöse Gewalt in historischer Dimension, De Gruyter | Oldenbourg, München, 2025, pp. 429–448.","chicago":"Süßmann, Johannes. “„Religiöse Gewalt“ in der Frühen Neuzeit? Eine begriffsgeschichtliche Revision.” In <i>Religiöse Gewalt in historischer Dimension</i>, edited by Dorothea Weltecke, 109:429–448. Schriften des Historischen Kollegs. Kolloquien. München: De Gruyter | Oldenbourg, 2025. <a href=\"https://doi.org/10.1515/9783110773781-018\">https://doi.org/10.1515/9783110773781-018</a>.","ieee":"J. Süßmann, “„Religiöse Gewalt“ in der Frühen Neuzeit? Eine begriffsgeschichtliche Revision,” in <i>Religiöse Gewalt in historischer Dimension</i>, vol. 109, D. Weltecke, Ed. München: De Gruyter | Oldenbourg, 2025, pp. 429–448.","apa":"Süßmann, J. (2025). „Religiöse Gewalt“ in der Frühen Neuzeit? Eine begriffsgeschichtliche Revision. In D. Weltecke (Ed.), <i>Religiöse Gewalt in historischer Dimension</i> (Vol. 109, pp. 429–448). De Gruyter | Oldenbourg. <a href=\"https://doi.org/10.1515/9783110773781-018\">https://doi.org/10.1515/9783110773781-018</a>","bibtex":"@inbook{Süßmann_2025, place={München}, series={Schriften des Historischen Kollegs. Kolloquien}, title={„Religiöse Gewalt“ in der Frühen Neuzeit? Eine begriffsgeschichtliche Revision}, volume={109}, DOI={<a href=\"https://doi.org/10.1515/9783110773781-018\">10.1515/9783110773781-018</a>}, booktitle={Religiöse Gewalt in historischer Dimension}, publisher={De Gruyter | Oldenbourg}, author={Süßmann, Johannes}, editor={Weltecke, Dorothea}, year={2025}, pages={429–448}, collection={Schriften des Historischen Kollegs. Kolloquien} }","ama":"Süßmann J. „Religiöse Gewalt“ in der Frühen Neuzeit? Eine begriffsgeschichtliche Revision. In: Weltecke D, ed. <i>Religiöse Gewalt in historischer Dimension</i>. Vol 109. Schriften des Historischen Kollegs. Kolloquien. De Gruyter | Oldenbourg; 2025:429–448. doi:<a href=\"https://doi.org/10.1515/9783110773781-018\">10.1515/9783110773781-018</a>","mla":"Süßmann, Johannes. “„Religiöse Gewalt“ in der Frühen Neuzeit? Eine begriffsgeschichtliche Revision.” <i>Religiöse Gewalt in historischer Dimension</i>, edited by Dorothea Weltecke, vol. 109, De Gruyter | Oldenbourg, 2025, pp. 429–448, doi:<a href=\"https://doi.org/10.1515/9783110773781-018\">10.1515/9783110773781-018</a>."},"place":"München","status":"public","user_id":"16220","volume":109,"editor":[{"first_name":"Dorothea","last_name":"Weltecke","full_name":"Weltecke, Dorothea"}],"page":"429–448","publisher":"De Gruyter | Oldenbourg","_id":"58225","abstract":[{"lang":"eng","text":"In this chapter the common parlance of “religious violence in early modern history” is put to the test, although it seems to be linked in an indissoluble way with the master narratives about this period. The first section shows that it makes no difference whether historians think of early modern history in terms of impersonal structures or of personal experience–they agree in regarding religion as a crucial cause of violence. \r\nAgainst this widespread conviction the paper unfolds two arguments. The first is that the Latin word “religio”, as it was used throughout the 16th and 17th century, did not mean ‘religion’ in our modern comprehensive understanding of the word. Instead its meaning was quite narrow and specific, referring either to the medieval sense of ‘committing oneself to God by joining a religious order’ (becoming a “religiosus” resp. a “religiosa”) or to the ancient sense of ‘scrupulously venerating God’. It did not mean ‘faith’, ‘doctrine’, ‘worship’, ‘church law’ or ‘denomination’, and definitely not all these things in conjunction. Only when the vernacular languages began to borrow the Latin word from the 16th century onwards was its narrow meaning broadened. As a consequence of reformation and counterreformation, the idea arose that one should make faith and doctrine and worship and church law match, although the attempt to implement this new rapport provoked much opposition and turned out to be a very violent process. From this point of view what is generally called “early modern religious violence” is violence caused not by religion, but by the ambition to establish a new idea of religion. \r\nThe second argument is that our modern understanding of religion is coined by the 18th-century critique of religion. Only the Enlightenment’s claim to overcome religion (in the new sense of the word) declared it to be “irrational” or even “fanatic”. Thus the Enlightenment invented religious fanatism, using it as a retrospective explanation of the violence that had gripped the last centuries. Modern parlance of “religious violence” unintentionally prolongs a very poor idea of religion–and one that should not be mistaken for an explanation."}],"publication":"Religiöse Gewalt in historischer Dimension","type":"book_chapter","keyword":["Religion","Gewalt","Begriffsgeschichte","Frühe Neuzeit","Aufklärung","Religionskritik"],"department":[{"_id":"446"},{"_id":"550"}],"date_created":"2025-01-16T17:44:09Z","publication_status":"published","date_updated":"2025-04-24T16:18:42Z","intvolume":"       109","title":"„Religiöse Gewalt“ in der Frühen Neuzeit? Eine begriffsgeschichtliche Revision","year":"2025","author":[{"full_name":"Süßmann, Johannes","first_name":"Johannes","last_name":"Süßmann"}],"publication_identifier":{"isbn":["9783110773781"]},"doi":"10.1515/9783110773781-018","main_file_link":[{"url":"https://www.degruyter.com/document/doi/10.1515/9783110773781-018/pdf"}],"series_title":"Schriften des Historischen Kollegs. Kolloquien","language":[{"iso":"ger"}]},{"date_created":"2025-02-07T10:55:00Z","department":[{"_id":"469"},{"_id":"550"}],"type":"book_chapter","keyword":["Islam","Islamwissenschaft","Toleranz","Islamische Geistesgeschichte","Interreligiöser Dialog"],"publication":"Islam II. Regionen, Lebensformen, Geistesgeschichte","extern":"1","series_title":"Die Religionen der Menschheit","language":[{"iso":"ger"}],"doi":"10.17433/978-3-17-034023-7","publication_identifier":{"isbn":["978-3-17-034022-0"]},"author":[{"id":"111362","first_name":"Stephan Matthias","orcid":"0009-0005-6980-2727","last_name":"Kokew","full_name":"Kokew, Stephan Matthias"}],"year":"2025","title":"Aspekte des Zusammenlebens zwischen Muslimen und Nichtmuslimen","date_updated":"2025-04-25T10:07:18Z","publication_status":"published","place":"Stuttgart","citation":{"mla":"Kokew, Stephan Matthias. “Aspekte des Zusammenlebens zwischen Muslimen und Nichtmuslimen.” <i>Islam II. Regionen, Lebensformen, Geistesgeschichte</i>, edited by Georges Tamer, 1st ed., vol. 25,2, Kohlhammer, 2025, pp. 216–34, doi:<a href=\"https://doi.org/10.17433/978-3-17-034023-7\">10.17433/978-3-17-034023-7</a>.","ama":"Kokew SM. Aspekte des Zusammenlebens zwischen Muslimen und Nichtmuslimen. In: Tamer G, ed. <i>Islam II. Regionen, Lebensformen, Geistesgeschichte</i>. Vol 25,2. 1st ed. Die Religionen der Menschheit. Kohlhammer; 2025:216-234. doi:<a href=\"https://doi.org/10.17433/978-3-17-034023-7\">10.17433/978-3-17-034023-7</a>","bibtex":"@inbook{Kokew_2025, place={Stuttgart}, edition={1}, series={Die Religionen der Menschheit}, title={Aspekte des Zusammenlebens zwischen Muslimen und Nichtmuslimen}, volume={25,2}, DOI={<a href=\"https://doi.org/10.17433/978-3-17-034023-7\">10.17433/978-3-17-034023-7</a>}, booktitle={Islam II. Regionen, Lebensformen, Geistesgeschichte}, publisher={Kohlhammer}, author={Kokew, Stephan Matthias}, editor={Tamer, Georges}, year={2025}, pages={216–234}, collection={Die Religionen der Menschheit} }","apa":"Kokew, S. M. (2025). Aspekte des Zusammenlebens zwischen Muslimen und Nichtmuslimen. In G. Tamer (Ed.), <i>Islam II. Regionen, Lebensformen, Geistesgeschichte: Vol. 25,2</i> (1st ed., pp. 216–234). Kohlhammer. <a href=\"https://doi.org/10.17433/978-3-17-034023-7\">https://doi.org/10.17433/978-3-17-034023-7</a>","ieee":"S. M. Kokew, “Aspekte des Zusammenlebens zwischen Muslimen und Nichtmuslimen,” in <i>Islam II. Regionen, Lebensformen, Geistesgeschichte</i>, 1st ed., vol. 25,2, G. Tamer, Ed. Stuttgart: Kohlhammer, 2025, pp. 216–234.","short":"S.M. Kokew, in: G. Tamer (Ed.), Islam II. Regionen, Lebensformen, Geistesgeschichte, 1st ed., Kohlhammer, Stuttgart, 2025, pp. 216–234.","chicago":"Kokew, Stephan Matthias. “Aspekte des Zusammenlebens zwischen Muslimen und Nichtmuslimen.” In <i>Islam II. Regionen, Lebensformen, Geistesgeschichte</i>, edited by Georges Tamer, 1st ed., 25,2:216–34. Die Religionen der Menschheit. Stuttgart: Kohlhammer, 2025. <a href=\"https://doi.org/10.17433/978-3-17-034023-7\">https://doi.org/10.17433/978-3-17-034023-7</a>."},"quality_controlled":"1","_id":"58538","publisher":"Kohlhammer","edition":"1","page":"216-234","editor":[{"full_name":"Tamer, Georges","first_name":"Georges","last_name":"Tamer"}],"volume":"25,2","user_id":"111362","status":"public"},{"user_id":"356","volume":121,"page":"134-160","language":[{"iso":"eng"}],"_id":"59846","date_updated":"2025-05-07T21:36:05Z","publication_status":"published","intvolume":"       121","title":"The Voice of the Bard: Milton’s Paradise Lost on Radio","status":"public","year":"2025","publication_identifier":{"issn":["0039-4130"]},"author":[{"id":"356","full_name":"Mildorf, Jarmila","first_name":"Jarmila","last_name":"Mildorf"}],"type":"journal_article","department":[{"_id":"1"}],"date_created":"2025-05-07T21:34:43Z","quality_controlled":"1","issue":"1","publication":"Studium Ricerca, Letteratura","citation":{"ama":"Mildorf J. The Voice of the Bard: Milton’s Paradise Lost on Radio. <i>Studium Ricerca, Letteratura</i>. 2025;121(1):134-160.","bibtex":"@article{Mildorf_2025, title={The Voice of the Bard: Milton’s Paradise Lost on Radio}, volume={121}, number={1}, journal={Studium Ricerca, Letteratura}, author={Mildorf, Jarmila}, year={2025}, pages={134–160} }","mla":"Mildorf, Jarmila. “The Voice of the Bard: Milton’s Paradise Lost on Radio.” <i>Studium Ricerca, Letteratura</i>, vol. 121, no. 1, 2025, pp. 134–60.","short":"J. Mildorf, Studium Ricerca, Letteratura 121 (2025) 134–160.","chicago":"Mildorf, Jarmila. “The Voice of the Bard: Milton’s Paradise Lost on Radio.” <i>Studium Ricerca, Letteratura</i> 121, no. 1 (2025): 134–60.","apa":"Mildorf, J. (2025). The Voice of the Bard: Milton’s Paradise Lost on Radio. <i>Studium Ricerca, Letteratura</i>, <i>121</i>(1), 134–160.","ieee":"J. Mildorf, “The Voice of the Bard: Milton’s Paradise Lost on Radio,” <i>Studium Ricerca, Letteratura</i>, vol. 121, no. 1, pp. 134–160, 2025."}},{"citation":{"mla":"Keksel, Ewald, et al. “Sensitizing Effect of Acetylene and 1,3-Butadiene on Toluene Oxidation in Laminar Flames.” <i>Combustion and Flame</i>, vol. 274, 113978, Elsevier BV, 2025, doi:<a href=\"https://doi.org/10.1016/j.combustflame.2025.113978\">10.1016/j.combustflame.2025.113978</a>.","ama":"Keksel E, Kluge S, Schleier D, et al. Sensitizing effect of acetylene and 1,3-butadiene on toluene oxidation in laminar flames. <i>Combustion and Flame</i>. 2025;274. doi:<a href=\"https://doi.org/10.1016/j.combustflame.2025.113978\">10.1016/j.combustflame.2025.113978</a>","bibtex":"@article{Keksel_Kluge_Schleier_Höner_Karakaya_Bierkandt_Köhler_Kasper_2025, title={Sensitizing effect of acetylene and 1,3-butadiene on toluene oxidation in laminar flames}, volume={274}, DOI={<a href=\"https://doi.org/10.1016/j.combustflame.2025.113978\">10.1016/j.combustflame.2025.113978</a>}, number={113978}, journal={Combustion and Flame}, publisher={Elsevier BV}, author={Keksel, Ewald and Kluge, Sebastian and Schleier, Domenik and Höner, Martin and Karakaya, Yasin and Bierkandt, Thomas and Köhler, Markus and Kasper, Tina}, year={2025} }","apa":"Keksel, E., Kluge, S., Schleier, D., Höner, M., Karakaya, Y., Bierkandt, T., Köhler, M., &#38; Kasper, T. (2025). Sensitizing effect of acetylene and 1,3-butadiene on toluene oxidation in laminar flames. <i>Combustion and Flame</i>, <i>274</i>, Article 113978. <a href=\"https://doi.org/10.1016/j.combustflame.2025.113978\">https://doi.org/10.1016/j.combustflame.2025.113978</a>","ieee":"E. Keksel <i>et al.</i>, “Sensitizing effect of acetylene and 1,3-butadiene on toluene oxidation in laminar flames,” <i>Combustion and Flame</i>, vol. 274, Art. no. 113978, 2025, doi: <a href=\"https://doi.org/10.1016/j.combustflame.2025.113978\">10.1016/j.combustflame.2025.113978</a>.","chicago":"Keksel, Ewald, Sebastian Kluge, Domenik Schleier, Martin Höner, Yasin Karakaya, Thomas Bierkandt, Markus Köhler, and Tina Kasper. “Sensitizing Effect of Acetylene and 1,3-Butadiene on Toluene Oxidation in Laminar Flames.” <i>Combustion and Flame</i> 274 (2025). <a href=\"https://doi.org/10.1016/j.combustflame.2025.113978\">https://doi.org/10.1016/j.combustflame.2025.113978</a>.","short":"E. Keksel, S. Kluge, D. Schleier, M. Höner, Y. Karakaya, T. Bierkandt, M. Köhler, T. Kasper, Combustion and Flame 274 (2025)."},"quality_controlled":"1","_id":"59901","funded_apc":"1","publisher":"Elsevier BV","user_id":"67837","volume":274,"status":"public","date_created":"2025-05-14T13:43:19Z","type":"journal_article","publication":"Combustion and Flame","article_number":"113978","language":[{"iso":"eng"}],"doi":"10.1016/j.combustflame.2025.113978","title":"Sensitizing effect of acetylene and 1,3-butadiene on toluene oxidation in laminar flames","year":"2025","author":[{"id":"67837","full_name":"Keksel, Ewald","first_name":"Ewald","last_name":"Keksel"},{"full_name":"Kluge, Sebastian","last_name":"Kluge","first_name":"Sebastian"},{"id":"98339","full_name":"Schleier, Domenik","first_name":"Domenik","last_name":"Schleier"},{"first_name":"Martin","last_name":"Höner","full_name":"Höner, Martin"},{"full_name":"Karakaya, Yasin","last_name":"Karakaya","first_name":"Yasin","id":"95069"},{"last_name":"Bierkandt","first_name":"Thomas","full_name":"Bierkandt, Thomas"},{"full_name":"Köhler, Markus","first_name":"Markus","last_name":"Köhler"},{"orcid":"0000-0003-3993-5316 ","first_name":"Tina","last_name":"Kasper","full_name":"Kasper, Tina","id":"94562"}],"publication_identifier":{"issn":["0010-2180"]},"publication_status":"published","date_updated":"2025-05-14T14:24:12Z","article_type":"original","intvolume":"       274"},{"date_created":"2025-05-07T12:15:41Z","type":"journal_article","department":[{"_id":"35"},{"_id":"2"},{"_id":"307"}],"issue":"19","publication":"The Journal of Physical Chemistry C","language":[{"iso":"eng"}],"doi":"10.1021/acs.jpcc.5c01678","year":"2025","title":"Temperature Studies of Zinc Tin Oxide Photoluminescence for Optical O<sub>2</sub> Sensing","author":[{"full_name":"Kothe, Linda","last_name":"Kothe","first_name":"Linda"},{"first_name":"Marvin","last_name":"Kloß","full_name":"Kloß, Marvin"},{"first_name":"Tobias","last_name":"Wagner","full_name":"Wagner, Tobias"},{"last_name":"Wengenroth","first_name":"Marc","full_name":"Wengenroth, Marc"},{"last_name":"Poeplau","first_name":"Michael","full_name":"Poeplau, Michael"},{"full_name":"Ester, Stephan","last_name":"Ester","first_name":"Stephan"},{"full_name":"Tiemann, Michael","orcid":"0000-0003-1711-2722","last_name":"Tiemann","first_name":"Michael","id":"23547"}],"publication_identifier":{"issn":["1932-7447","1932-7455"]},"publication_status":"published","date_updated":"2025-05-16T06:16:18Z","intvolume":"       129","citation":{"chicago":"Kothe, Linda, Marvin Kloß, Tobias Wagner, Marc Wengenroth, Michael Poeplau, Stephan Ester, and Michael Tiemann. “Temperature Studies of Zinc Tin Oxide Photoluminescence for Optical O<sub>2</sub> Sensing.” <i>The Journal of Physical Chemistry C</i> 129, no. 19 (2025): 9239–45. <a href=\"https://doi.org/10.1021/acs.jpcc.5c01678\">https://doi.org/10.1021/acs.jpcc.5c01678</a>.","short":"L. Kothe, M. Kloß, T. Wagner, M. Wengenroth, M. Poeplau, S. Ester, M. Tiemann, The Journal of Physical Chemistry C 129 (2025) 9239–9245.","apa":"Kothe, L., Kloß, M., Wagner, T., Wengenroth, M., Poeplau, M., Ester, S., &#38; Tiemann, M. (2025). Temperature Studies of Zinc Tin Oxide Photoluminescence for Optical O<sub>2</sub> Sensing. <i>The Journal of Physical Chemistry C</i>, <i>129</i>(19), 9239–9245. <a href=\"https://doi.org/10.1021/acs.jpcc.5c01678\">https://doi.org/10.1021/acs.jpcc.5c01678</a>","ieee":"L. Kothe <i>et al.</i>, “Temperature Studies of Zinc Tin Oxide Photoluminescence for Optical O<sub>2</sub> Sensing,” <i>The Journal of Physical Chemistry C</i>, vol. 129, no. 19, pp. 9239–9245, 2025, doi: <a href=\"https://doi.org/10.1021/acs.jpcc.5c01678\">10.1021/acs.jpcc.5c01678</a>.","ama":"Kothe L, Kloß M, Wagner T, et al. Temperature Studies of Zinc Tin Oxide Photoluminescence for Optical O<sub>2</sub> Sensing. <i>The Journal of Physical Chemistry C</i>. 2025;129(19):9239-9245. doi:<a href=\"https://doi.org/10.1021/acs.jpcc.5c01678\">10.1021/acs.jpcc.5c01678</a>","bibtex":"@article{Kothe_Kloß_Wagner_Wengenroth_Poeplau_Ester_Tiemann_2025, title={Temperature Studies of Zinc Tin Oxide Photoluminescence for Optical O<sub>2</sub> Sensing}, volume={129}, DOI={<a href=\"https://doi.org/10.1021/acs.jpcc.5c01678\">10.1021/acs.jpcc.5c01678</a>}, number={19}, journal={The Journal of Physical Chemistry C}, publisher={American Chemical Society (ACS)}, author={Kothe, Linda and Kloß, Marvin and Wagner, Tobias and Wengenroth, Marc and Poeplau, Michael and Ester, Stephan and Tiemann, Michael}, year={2025}, pages={9239–9245} }","mla":"Kothe, Linda, et al. “Temperature Studies of Zinc Tin Oxide Photoluminescence for Optical O<sub>2</sub> Sensing.” <i>The Journal of Physical Chemistry C</i>, vol. 129, no. 19, American Chemical Society (ACS), 2025, pp. 9239–45, doi:<a href=\"https://doi.org/10.1021/acs.jpcc.5c01678\">10.1021/acs.jpcc.5c01678</a>."},"quality_controlled":"1","page":"9239-9245","_id":"59842","publisher":"American Chemical Society (ACS)","user_id":"23547","volume":129,"status":"public"},{"publication":"Information Systems and e-Business Management","abstract":[{"text":"Reputation systems to rate companies’ performances remain largely unexplored in research and are scarcely used in business-to-business (B2B) practice. Such systems are essential for businesses seeking trustworthy partners, as they help reduce information asymmetry, lower buyers' transaction risks, and allow high-quality service providers to justify premium pricing. Unlike traditional review-based systems in the business-to-consumer (B2C) context, we propose a B2B reputation mechanism in which buyers commit to a rating payment before a transaction. Once the buyer finalizes the rating, this payment is executed and recorded on a blockchain as an immutable, secure ledger. Our system mimics natural trust-building mechanisms with ratings that are (1) monetary-based, (2) stake-based, (3) non-aggregated, (4) involve counter-ratings, (5) selectively sellable, (6) individually comparable, (7) stored on a blockchain, (8) and monitored by a third instance. This system provides a novel approach to fostering trust in B2B transactions by reducing information asymmetry and transaction risk. We illustrate the mechanism’s application in the consulting sector. Our analysis has identified 23 institutional trust and distrust dimensions that promote establishing institutional trust through the proposed mechanism. Qualitative interviews suggest that, while complex and challenging to apply, this mechanism can foster trust in B2B transactions. Given the low maturity in the application domain—rating professional business services with business reputation systems—and solution domain—using monetary stakes for ratings, this system stands as a potential invention.","lang":"eng"}],"date_created":"2025-05-25T10:06:23Z","file":[{"file_id":"60032","success":1,"content_type":"application/pdf","relation":"main_file","date_updated":"2025-05-25T10:09:43Z","file_name":"ISeB - Blockchain-Based Reputation Systems.pdf","access_level":"closed","file_size":1440251,"date_created":"2025-05-25T10:09:43Z","creator":"dabe"}],"department":[{"_id":"195"}],"type":"journal_article","author":[{"full_name":"Hemmrich, Simon","last_name":"Hemmrich","first_name":"Simon"},{"first_name":"Volker","last_name":"Nissen","full_name":"Nissen, Volker"},{"full_name":"Beverugen, Daniel","first_name":"Daniel","last_name":"Beverugen"},{"last_name":"Pauls","first_name":"Josias Daniel Miño","full_name":"Pauls, Josias Daniel Miño"}],"publication_identifier":{"issn":["1617-9846","1617-9854"]},"year":"2025","title":"Blockchain-based reputation systems for business-to-business services: designing a reputation mechanism to reduce information asymmetry in professional consulting","article_type":"original","date_updated":"2025-05-25T10:12:00Z","publication_status":"published","language":[{"iso":"eng"}],"main_file_link":[{"open_access":"1","url":"https://link.springer.com/article/10.1007/s10257-025-00702-9?utm_source=rct_congratemailt&utm_medium=email&utm_campaign=oa_20250523&utm_content=10.1007%2Fs10257-025-00702-9"}],"doi":"10.1007/s10257-025-00702-9","citation":{"ama":"Hemmrich S, Nissen V, Beverugen D, Pauls JDM. Blockchain-based reputation systems for business-to-business services: designing a reputation mechanism to reduce information asymmetry in professional consulting. <i>Information Systems and e-Business Management</i>. Published online 2025. doi:<a href=\"https://doi.org/10.1007/s10257-025-00702-9\">10.1007/s10257-025-00702-9</a>","bibtex":"@article{Hemmrich_Nissen_Beverugen_Pauls_2025, title={Blockchain-based reputation systems for business-to-business services: designing a reputation mechanism to reduce information asymmetry in professional consulting}, DOI={<a href=\"https://doi.org/10.1007/s10257-025-00702-9\">10.1007/s10257-025-00702-9</a>}, journal={Information Systems and e-Business Management}, publisher={Springer Science and Business Media LLC}, author={Hemmrich, Simon and Nissen, Volker and Beverugen, Daniel and Pauls, Josias Daniel Miño}, year={2025} }","mla":"Hemmrich, Simon, et al. “Blockchain-Based Reputation Systems for Business-to-Business Services: Designing a Reputation Mechanism to Reduce Information Asymmetry in Professional Consulting.” <i>Information Systems and E-Business Management</i>, Springer Science and Business Media LLC, 2025, doi:<a href=\"https://doi.org/10.1007/s10257-025-00702-9\">10.1007/s10257-025-00702-9</a>.","chicago":"Hemmrich, Simon, Volker Nissen, Daniel Beverugen, and Josias Daniel Miño Pauls. “Blockchain-Based Reputation Systems for Business-to-Business Services: Designing a Reputation Mechanism to Reduce Information Asymmetry in Professional Consulting.” <i>Information Systems and E-Business Management</i>, 2025. <a href=\"https://doi.org/10.1007/s10257-025-00702-9\">https://doi.org/10.1007/s10257-025-00702-9</a>.","short":"S. Hemmrich, V. Nissen, D. Beverugen, J.D.M. Pauls, Information Systems and E-Business Management (2025).","apa":"Hemmrich, S., Nissen, V., Beverugen, D., &#38; Pauls, J. D. M. (2025). Blockchain-based reputation systems for business-to-business services: designing a reputation mechanism to reduce information asymmetry in professional consulting. <i>Information Systems and E-Business Management</i>. <a href=\"https://doi.org/10.1007/s10257-025-00702-9\">https://doi.org/10.1007/s10257-025-00702-9</a>","ieee":"S. Hemmrich, V. Nissen, D. Beverugen, and J. D. M. Pauls, “Blockchain-based reputation systems for business-to-business services: designing a reputation mechanism to reduce information asymmetry in professional consulting,” <i>Information Systems and e-Business Management</i>, 2025, doi: <a href=\"https://doi.org/10.1007/s10257-025-00702-9\">10.1007/s10257-025-00702-9</a>."},"file_date_updated":"2025-05-25T10:09:43Z","quality_controlled":"1","oa":"1","status":"public","has_accepted_license":"1","_id":"60031","publisher":"Springer Science and Business Media LLC","ddc":["000"],"user_id":"59677"}]