[{"issue":"22","publication":"Journal of Applied Physics","abstract":[{"lang":"eng","text":"Piezoresponse force microscopy (PFM) is one of the most widespread methods for investigating and visualizing ferroelectric domain structures down to the nanometer length scale. PFM makes use of the direct coupling of the piezoelectric response to the crystal lattice, and hence, it is most often applied to spatially map the three-dimensional (3D) near-surface domain distribution of any polar or ferroic sample. Nonetheless, since most samples investigated by PFM are at least semiconducting or fully insulating, the electric ac field emerging from the conductive scanning force microscopy (SFM) tip penetrates the sample and, hence, may also couple to polar features that are deeply buried into the bulk of the sample under investigation. Thus, in the work presented here, we experimentally and theoretically explore the contrast and depth resolution capabilities of PFM, by analyzing the dependence of several key parameters. These key parameters include the depth of the buried feature, i.e., here a domain wall (DW), as well as PFM-relevant technical parameters such as the tip radius, the PFM drive voltage and frequency, and the signal-to-noise ratio. The theoretical predictions are experimentally verified using x-cut periodically poled lithium niobate single crystals that are specially prepared into wedge-shaped samples, in order to allow the buried feature, here the DW, to be “positioned” at any depth into the bulk. This inspection essentially contributes to the fundamental understanding in PFM contrast analysis and to the reconstruction of 3D domain structures down to a 1 μm-penetration depth into the sample."}],"date_created":"2024-07-01T21:00:43Z","department":[{"_id":"15"},{"_id":"169"},{"_id":"288"},{"_id":"623"}],"type":"journal_article","keyword":["Ferroelectrics","lithium niobate","piezoresponse force microscopy"],"author":[{"last_name":"Roeper","first_name":"Matthias","full_name":"Roeper, Matthias"},{"full_name":"Seddon, Samuel D.","first_name":"Samuel D.","last_name":"Seddon"},{"full_name":"Amber, Zeeshan H.","last_name":"Amber","first_name":"Zeeshan H."},{"id":"22501","full_name":"Rüsing, Michael","orcid":"0000-0003-4682-4577","last_name":"Rüsing","first_name":"Michael"},{"full_name":"Eng, Lukas M.","last_name":"Eng","first_name":"Lukas M."}],"publication_identifier":{"issn":["0021-8979","1089-7550"]},"title":"Depth resolution in piezoresponse force microscopy","year":"2024","article_type":"original","intvolume":" 135","publication_status":"published","date_updated":"2025-04-03T12:35:34Z","language":[{"iso":"eng"}],"main_file_link":[{"url":"https://doi.org/10.1063/5.0206784","open_access":"1"}],"doi":"10.1063/5.0206784","citation":{"ieee":"M. Roeper, S. D. Seddon, Z. H. Amber, M. Rüsing, and L. M. Eng, “Depth resolution in piezoresponse force microscopy,” Journal of Applied Physics, vol. 135, no. 22, 2024, doi: 10.1063/5.0206784.","apa":"Roeper, M., Seddon, S. D., Amber, Z. H., Rüsing, M., & Eng, L. M. (2024). Depth resolution in piezoresponse force microscopy. Journal of Applied Physics, 135(22). https://doi.org/10.1063/5.0206784","short":"M. Roeper, S.D. Seddon, Z.H. Amber, M. Rüsing, L.M. Eng, Journal of Applied Physics 135 (2024).","chicago":"Roeper, Matthias, Samuel D. Seddon, Zeeshan H. Amber, Michael Rüsing, and Lukas M. Eng. “Depth Resolution in Piezoresponse Force Microscopy.” Journal of Applied Physics 135, no. 22 (2024). https://doi.org/10.1063/5.0206784.","mla":"Roeper, Matthias, et al. “Depth Resolution in Piezoresponse Force Microscopy.” Journal of Applied Physics, vol. 135, no. 22, AIP Publishing, 2024, doi:10.1063/5.0206784.","bibtex":"@article{Roeper_Seddon_Amber_Rüsing_Eng_2024, title={Depth resolution in piezoresponse force microscopy}, volume={135}, DOI={10.1063/5.0206784}, number={22}, journal={Journal of Applied Physics}, publisher={AIP Publishing}, author={Roeper, Matthias and Seddon, Samuel D. and Amber, Zeeshan H. and Rüsing, Michael and Eng, Lukas M.}, year={2024} }","ama":"Roeper M, Seddon SD, Amber ZH, Rüsing M, Eng LM. Depth resolution in piezoresponse force microscopy. Journal of Applied Physics. 2024;135(22). doi:10.1063/5.0206784"},"quality_controlled":"1","oa":"1","status":"public","publisher":"AIP Publishing","_id":"54966","volume":135,"user_id":"22501"},{"publication":"56. Jahrestagung der Arbeitsgemeinschaft für Sportpsychologie (ASP)","date_created":"2024-05-16T09:33:09Z","file":[{"file_id":"57507","content_type":"application/pdf","relation":"main_file","date_updated":"2025-04-03T10:29:10Z","file_name":"asp2024 Böer et al.pdf","file_size":108251,"access_level":"open_access","date_created":"2024-11-29T11:16:33Z","creator":"nboeer"}],"department":[{"_id":"17"},{"_id":"266"}],"type":"conference_abstract","author":[{"orcid":"0000-0002-0236-7282","first_name":"Nils Tobias","last_name":"Böer","full_name":"Böer, Nils Tobias","id":"52000"},{"full_name":"Güldenpenning, Iris","first_name":"Iris","orcid":"0000-0003-0549-5543","last_name":"Güldenpenning","id":"52931"},{"full_name":"Weigelt, Matthias","last_name":"Weigelt","first_name":"Matthias","id":"36388"}],"year":"2024","title":"The influence of effort instruction on fake production costs in basketball novices and experienced basketball players.","date_updated":"2025-04-03T10:29:11Z","language":[{"iso":"eng"}],"citation":{"ama":"Böer NT, Güldenpenning I, Weigelt M. The influence of effort instruction on fake production costs in basketball novices and experienced basketball players. In: Koester D, Krämer L, Fuhlert L, Everding J, Weilharter F, Marlovits A, eds. 56. Jahrestagung Der Arbeitsgemeinschaft Für Sportpsychologie (ASP). ; 2024:119.","bibtex":"@inproceedings{Böer_Güldenpenning_Weigelt_2024, place={Berlin}, title={The influence of effort instruction on fake production costs in basketball novices and experienced basketball players.}, booktitle={56. Jahrestagung der Arbeitsgemeinschaft für Sportpsychologie (ASP)}, author={Böer, Nils Tobias and Güldenpenning, Iris and Weigelt, Matthias}, editor={Koester, Dirk and Krämer, Lina and Fuhlert, Leonhard and Everding, Jannik and Weilharter, Fritz and Marlovits, Andreas}, year={2024}, pages={119} }","mla":"Böer, Nils Tobias, et al. “The Influence of Effort Instruction on Fake Production Costs in Basketball Novices and Experienced Basketball Players.” 56. Jahrestagung Der Arbeitsgemeinschaft Für Sportpsychologie (ASP), edited by Dirk Koester et al., 2024, p. 119.","short":"N.T. Böer, I. Güldenpenning, M. Weigelt, in: D. Koester, L. Krämer, L. Fuhlert, J. Everding, F. Weilharter, A. Marlovits (Eds.), 56. Jahrestagung Der Arbeitsgemeinschaft Für Sportpsychologie (ASP), Berlin, 2024, p. 119.","chicago":"Böer, Nils Tobias, Iris Güldenpenning, and Matthias Weigelt. “The Influence of Effort Instruction on Fake Production Costs in Basketball Novices and Experienced Basketball Players.” In 56. Jahrestagung Der Arbeitsgemeinschaft Für Sportpsychologie (ASP), edited by Dirk Koester, Lina Krämer, Leonhard Fuhlert, Jannik Everding, Fritz Weilharter, and Andreas Marlovits, 119. Berlin, 2024.","apa":"Böer, N. T., Güldenpenning, I., & Weigelt, M. (2024). The influence of effort instruction on fake production costs in basketball novices and experienced basketball players. In D. Koester, L. Krämer, L. Fuhlert, J. Everding, F. Weilharter, & A. Marlovits (Eds.), 56. Jahrestagung der Arbeitsgemeinschaft für Sportpsychologie (ASP) (p. 119).","ieee":"N. T. Böer, I. Güldenpenning, and M. Weigelt, “The influence of effort instruction on fake production costs in basketball novices and experienced basketball players.,” in 56. Jahrestagung der Arbeitsgemeinschaft für Sportpsychologie (ASP), Berlin, 2024, p. 119."},"file_date_updated":"2025-04-03T10:29:10Z","quality_controlled":"1","place":"Berlin","oa":"1","conference":{"start_date":"2024-05-09","name":"56. Jahrestagung der Arbeitsgemeinschaft für Sportpsychologie (ASP)","location":"Berlin","end_date":"2024-05-11"},"status":"public","has_accepted_license":"1","_id":"54303","page":"119","editor":[{"last_name":"Koester","first_name":"Dirk","full_name":"Koester, Dirk"},{"last_name":"Krämer","first_name":"Lina","full_name":"Krämer, Lina"},{"last_name":"Fuhlert","first_name":"Leonhard","full_name":"Fuhlert, Leonhard"},{"full_name":"Everding, Jannik","last_name":"Everding","first_name":"Jannik"},{"first_name":"Fritz","last_name":"Weilharter","full_name":"Weilharter, Fritz"},{"first_name":"Andreas","last_name":"Marlovits","full_name":"Marlovits, Andreas"}],"user_id":"52000","ddc":["150"]},{"language":[{"iso":"eng"}],"main_file_link":[{"open_access":"1","url":"https://onlinelibrary.wiley.com/doi/10.1002/jad.12264"}],"doi":"http://dx.doi.org/10.1002/jad.12264","publication_identifier":{"issn":["0140-1971","1095-9254"]},"author":[{"full_name":"Kurock, Ricarda","first_name":"Ricarda","last_name":"Kurock","id":"78797"},{"first_name":"Jeannine","last_name":"Teichert","orcid":"0000-0002-7571-891X","full_name":"Teichert, Jeannine","id":"83055"},{"id":"346","full_name":"Meister, Dorothee M.","orcid":"orcid.org/0000-0002-9685-4988","first_name":"Dorothee M.","last_name":"Meister"},{"last_name":"Gerhardts","first_name":"Lara","full_name":"Gerhardts, Lara"},{"id":"27152","full_name":"Buhl, Heike M.","last_name":"Buhl","first_name":"Heike M."},{"last_name":"Bonanati","first_name":"Sabrina","full_name":"Bonanati, Sabrina"}],"title":"A mixed‐methods study of the quality of parental support during adolescents' information‐related Internet use as a co‐construction process","year":"2024","intvolume":" 96","date_updated":"2025-07-03T09:06:39Z","publication_status":"published","date_created":"2023-10-26T12:01:24Z","department":[{"_id":"427"},{"_id":"137"}],"type":"journal_article","keyword":["Psychiatry and Mental health","Developmental and Educational Psychology","Social Psychology","Pediatrics","Perinatology and Child Health"],"issue":"3","publication":"Journal of Adolescence","abstract":[{"text":"AbstractIntroductionIn Europe, most Internet searches for school‐related tasks are situated at home, where parents can support adolescents. Although the frequency (quantity) of parental support has already been analyzed, a research gap exists concerning the quality of parental support in adolescents' information‐related Internet use. The quality of parental support in the field of homework involvement is known to be a predictor of adolescents' learning motivation and academic achievement, often discussed with regard to self‐determination theory (SDT) in terms of autonomy support, structure, emotional support, and control. These categories were adapted in this study to analyze parents' support in adolescents' Internet searching activities.MethodsUsing a mixed‐methods approach, we combined quantitative questionnaires and qualitative observations to analyze joint information‐related Internet uses. Therefore, 243 parent–adolescent dyads were surveyed and six parent–adolescent dyads were observed by videography in 2019/2020 in Germany. The adolescents were 11 years old, on average.ResultsThe parents rated all qualities higher than the adolescents. Emotional support was rated highest by both groups, whereas structure was rated lowest. Adolescents' and parents' view on parental support differ. The qualitative study revealed parents' often interfering behavior, whereas emotional support was low. Further, the active role of adolescents was highlighted in both quantitative and qualitative data.ConclusionsBy combining quantitative and qualitative approaches, we demonstrated a fruitful application of SDT in analyzing the quality of parental support during adolescents' Internet searches at home and shed light on the co‐construction of joint Internet searches.","lang":"eng"}],"publisher":"Wiley","_id":"48486","page":"566-579","volume":96,"user_id":"83055","status":"public","oa":"1","citation":{"ieee":"R. Kurock, J. Teichert, D. M. Meister, L. Gerhardts, H. M. Buhl, and S. Bonanati, “A mixed‐methods study of the quality of parental support during adolescents’ information‐related Internet use as a co‐construction process,” Journal of Adolescence, vol. 96, no. 3, pp. 566–579, 2024, doi: http://dx.doi.org/10.1002/jad.12264.","apa":"Kurock, R., Teichert, J., Meister, D. M., Gerhardts, L., Buhl, H. M., & Bonanati, S. (2024). A mixed‐methods study of the quality of parental support during adolescents’ information‐related Internet use as a co‐construction process. Journal of Adolescence, 96(3), 566–579. http://dx.doi.org/10.1002/jad.12264","short":"R. Kurock, J. Teichert, D.M. Meister, L. Gerhardts, H.M. Buhl, S. Bonanati, Journal of Adolescence 96 (2024) 566–579.","chicago":"Kurock, Ricarda, Jeannine Teichert, Dorothee M. Meister, Lara Gerhardts, Heike M. Buhl, and Sabrina Bonanati. “A Mixed‐methods Study of the Quality of Parental Support during Adolescents’ Information‐related Internet Use as a Co‐construction Process.” Journal of Adolescence 96, no. 3 (2024): 566–79. http://dx.doi.org/10.1002/jad.12264.","mla":"Kurock, Ricarda, et al. “A Mixed‐methods Study of the Quality of Parental Support during Adolescents’ Information‐related Internet Use as a Co‐construction Process.” Journal of Adolescence, vol. 96, no. 3, Wiley, 2024, pp. 566–79, doi:http://dx.doi.org/10.1002/jad.12264.","bibtex":"@article{Kurock_Teichert_Meister_Gerhardts_Buhl_Bonanati_2024, title={A mixed‐methods study of the quality of parental support during adolescents’ information‐related Internet use as a co‐construction process}, volume={96}, DOI={http://dx.doi.org/10.1002/jad.12264}, number={3}, journal={Journal of Adolescence}, publisher={Wiley}, author={Kurock, Ricarda and Teichert, Jeannine and Meister, Dorothee M. and Gerhardts, Lara and Buhl, Heike M. and Bonanati, Sabrina}, year={2024}, pages={566–579} }","ama":"Kurock R, Teichert J, Meister DM, Gerhardts L, Buhl HM, Bonanati S. A mixed‐methods study of the quality of parental support during adolescents’ information‐related Internet use as a co‐construction process. Journal of Adolescence. 2024;96(3):566-579. doi:http://dx.doi.org/10.1002/jad.12264"},"project":[{"_id":"378","grant_number":"01JD1814A","name":"DigHomE: DigHomE: Digital Home Learning Environment – Gelingensbedingungen elterlicher Unterstützung bei der informationsorientierten Internetnutzung"}],"quality_controlled":"1"},{"language":[{"iso":"ger"}],"author":[{"last_name":"Quast","first_name":"Julia","full_name":"Quast, Julia","id":"102451"}],"year":"2024","title":"Zwischen Dethematisierung und Demonetarisierung Der Holocaust in Darstellungen von NS und Zweitem Weltkrieg auf YouTube","article_type":"original","intvolume":" 22","publication_status":"published","date_updated":"2025-07-04T18:36:43Z","date_created":"2024-12-05T13:08:48Z","department":[{"_id":"6"}],"type":"journal_article","keyword":["Zweiter Weltkrieg","Holocaust","Geschichtsbild","Public History","Social Media","YouTube","Erinnerungskultur"],"publication":"Zeitschrift für Genozidforschung","issue":"2","abstract":[{"text":"Between Dethematizing and Demonetisation: The Holocaust in depictions of National-Socialism and World War Two on YouTube – In September 2018, an ambitious \r\nand highly noteworthy project for the construction and distribution of a broad-reaching portrayal of 20th-century violence in the digital age was launched: the YouTube \r\nchannel World War Two (WW2). Their mission was to present the experiences of \r\nthose who lived through the war in a radically objective, apolitical, and detailed \r\nmanner. The main series, sharing the same title as the channel, focused on military \r\nevents, while another series titled War Against Humanity (WAH) would address \r\nwar crimes, human rights abuses, the mass murder of civilians and prisoners of \r\nwar, Nazi euthanasia crimes, and the Holocaust. This division of the narrative into \r\na military history (main series) and a separate history of war crimes and the Holocaust (side series) raises important questions about the conditions, opportunities, \r\nand limitations that YouTube’s media and economic structures impose on the portrayal of war, mass violence, and genocide. The paper also examines how these \r\nstructures influence the narrative and shape the presented historical image, and \r\nwhat consequences arise for the depiction of war and history from an academic perspective. Lastly, it explores the reasons behind this narrative split: whether it was \r\na deliberate decision to systematically differentiate the storytelling or a strategic \r\nmove shaped by YouTube’s media and economic constraints. The question arises: \r\nto what extent can historical education on digital platforms like YouTube, driven \r\nby the need for content monetization, still align closely with academic standards?","lang":"eng"}],"publisher":"Velbrück ","_id":"57593","page":"264-291","volume":22,"user_id":"102451","status":"public","citation":{"bibtex":"@article{Quast_2024, title={Zwischen Dethematisierung und Demonetarisierung  Der Holocaust in Darstellungen von NS  und Zweitem Weltkrieg auf YouTube}, volume={22}, number={2}, journal={Zeitschrift für Genozidforschung}, publisher={Velbrück }, author={Quast, Julia}, year={2024}, pages={264–291} }","ama":"Quast J. Zwischen Dethematisierung und Demonetarisierung  Der Holocaust in Darstellungen von NS  und Zweitem Weltkrieg auf YouTube. Zeitschrift für Genozidforschung. 2024;22(2):264-291.","mla":"Quast, Julia. “Zwischen Dethematisierung und Demonetarisierung  Der Holocaust in Darstellungen von NS  und Zweitem Weltkrieg auf YouTube.” Zeitschrift für Genozidforschung, vol. 22, no. 2, Velbrück , 2024, pp. 264–91.","chicago":"Quast, Julia. “Zwischen Dethematisierung und Demonetarisierung  Der Holocaust in Darstellungen von NS  und Zweitem Weltkrieg auf YouTube.” Zeitschrift für Genozidforschung 22, no. 2 (2024): 264–91.","short":"J. Quast, Zeitschrift für Genozidforschung 22 (2024) 264–291.","ieee":"J. Quast, “Zwischen Dethematisierung und Demonetarisierung  Der Holocaust in Darstellungen von NS  und Zweitem Weltkrieg auf YouTube,” Zeitschrift für Genozidforschung, vol. 22, no. 2, pp. 264–291, 2024.","apa":"Quast, J. (2024). Zwischen Dethematisierung und Demonetarisierung  Der Holocaust in Darstellungen von NS  und Zweitem Weltkrieg auf YouTube. Zeitschrift für Genozidforschung, 22(2), 264–291."},"project":[{"name":"Der Zweite Weltkrieg und seine (Un-)Vermarktbarkeit","_id":"1273"}],"quality_controlled":"1"},{"user_id":"27152","volume":7,"_id":"52328","status":"public","oa":"1","quality_controlled":"1","project":[{"name":"LehramtsNavi: Weiterentwicklungsorientiertes Self-Assessment am Übergang zum Lehramtsstudium","_id":"377"}],"citation":{"ama":"Kleine SM, Sohlau S, Seifert A, Buhl HM. Förderung der Selbstreflexion und Weiterentwicklungsorientierung durch reflexionsorientierte Workshops im Lehramtsstudium. Herausforderung Lehrer*innenbildung - Zeitschrift zur Konzeption, Gestaltung und Diskussion. 2024;7(1). doi:10.11576/HLZ-6392","bibtex":"@article{Kleine_Sohlau_Seifert_Buhl_2024, title={Förderung der Selbstreflexion und Weiterentwicklungsorientierung durch reflexionsorientierte Workshops im Lehramtsstudium}, volume={7}, DOI={10.11576/HLZ-6392}, number={1}, journal={Herausforderung Lehrer*innenbildung - Zeitschrift zur Konzeption, Gestaltung und Diskussion}, author={Kleine, Sabrina M and Sohlau, Sylvia and Seifert, Andreas and Buhl, Heike M.}, year={2024} }","mla":"Kleine, Sabrina M., et al. “Förderung der Selbstreflexion und Weiterentwicklungsorientierung durch reflexionsorientierte Workshops im Lehramtsstudium.” Herausforderung Lehrer*innenbildung - Zeitschrift zur Konzeption, Gestaltung und Diskussion, vol. 7, no. 1, 2024, doi:10.11576/HLZ-6392.","short":"S.M. Kleine, S. Sohlau, A. Seifert, H.M. Buhl, Herausforderung Lehrer*innenbildung - Zeitschrift zur Konzeption, Gestaltung und Diskussion 7 (2024).","chicago":"Kleine, Sabrina M, Sylvia Sohlau, Andreas Seifert, and Heike M. Buhl. “Förderung der Selbstreflexion und Weiterentwicklungsorientierung durch reflexionsorientierte Workshops im Lehramtsstudium.” Herausforderung Lehrer*innenbildung - Zeitschrift zur Konzeption, Gestaltung und Diskussion 7, no. 1 (2024). https://doi.org/10.11576/HLZ-6392.","apa":"Kleine, S. M., Sohlau, S., Seifert, A., & Buhl, H. M. (2024). Förderung der Selbstreflexion und Weiterentwicklungsorientierung durch reflexionsorientierte Workshops im Lehramtsstudium. Herausforderung Lehrer*innenbildung - Zeitschrift zur Konzeption, Gestaltung und Diskussion, 7(1). https://doi.org/10.11576/HLZ-6392","ieee":"S. M. Kleine, S. Sohlau, A. Seifert, and H. M. Buhl, “Förderung der Selbstreflexion und Weiterentwicklungsorientierung durch reflexionsorientierte Workshops im Lehramtsstudium,” Herausforderung Lehrer*innenbildung - Zeitschrift zur Konzeption, Gestaltung und Diskussion, vol. 7, no. 1, 2024, doi: 10.11576/HLZ-6392."},"doi":"10.11576/HLZ-6392","main_file_link":[{"url":"https://www.herausforderung-lehrerinnenbildung.de/index.php/hlz/article/view/6392/6311","open_access":"1"}],"language":[{"iso":"ger"}],"publication_status":"published","date_updated":"2025-07-16T08:19:13Z","intvolume":" 7","title":"Förderung der Selbstreflexion und Weiterentwicklungsorientierung durch reflexionsorientierte Workshops im Lehramtsstudium","year":"2024","author":[{"full_name":"Kleine, Sabrina M","first_name":"Sabrina M","last_name":"Kleine"},{"full_name":"Sohlau, Sylvia","last_name":"Sohlau","first_name":"Sylvia"},{"id":"693","last_name":"Seifert","first_name":"Andreas","full_name":"Seifert, Andreas"},{"id":"27152","full_name":"Buhl, Heike M.","first_name":"Heike M.","last_name":"Buhl"}],"type":"journal_article","date_created":"2024-03-06T09:26:12Z","abstract":[{"lang":"ger","text":"In der Professionalisierung von Lehrkräften ist die Selbst-reflexion eine wesentliche Voraussetzung, da sie zentral für die Weiterentwicklung der eigenen Kompetenzen ist. Daraus ergibt sich die Notwendigkeit, bereits in der ersten Phase der Lehrkräftebildung die Selbstreflexion und die Weiterentwicklungsorientierung zu fördern. Hierzu sind auf Grund des sozialen Settings gezielte reflexionsorientierte Workshops chancenreich. Um die Effekte von reflexionsorientierten Workshops und dabei den Zusammenhang zwischen der Selbst-reflexion und der Weiterentwicklungsorientierung zu überprüfen, wurden anhand einer Stichprobe von N = 646 Lehramtsstudierenden die Entwicklung der Selbst-reflexion und Weiterentwicklungsorientierung beim Besuch von Workshops zu überfachlichen Kompetenzen untersucht. Die Datenerhebung erfolgte vor, direkt nach und erneut vier bis sechs Wochen nach den reflexionsorientierten Workshops mittels eines Fragebogens. Durch Varianzanalysen können in Bezug auf die Selbst-reflexion direkt nach den Workshops signifikante Effekte sowie eine konstante Ausprägung vier bis sechs Wochen später nachgewiesen werden. Weiterhin konnte ein signifikanter Anstieg bei der Weiterentwicklungsorientierung über die drei Messzeitpunkte verzeichnet werden. Ebenso zeigte sich ein positiver Effekt der Selbstreflexion auf den Anstieg der Weiterentwicklungsorientierung."}],"issue":"1","publication":"Herausforderung Lehrer*innenbildung - Zeitschrift zur Konzeption, Gestaltung und Diskussion"},{"date_created":"2025-03-04T08:55:40Z","oa":"1","type":"conference","citation":{"mla":"Rezat, Sara, et al. A School Student Essay Corpus for Analyzing Interactions of Argumentative Structure and Quality. 2024, doi:https://doi.org/10.48550/arXiv.2404.02529 .","apa":"Rezat, S., Stahl, M., Michel, N., Kilsbach, S., Schmidtke, J., & Wachsmuth, H. (2024). A School Student Essay Corpus for Analyzing Interactions of Argumentative Structure and Quality. https://doi.org/10.48550/arXiv.2404.02529 ","ieee":"S. Rezat, M. Stahl, N. Michel, S. Kilsbach, J. Schmidtke, and H. Wachsmuth, “A School Student Essay Corpus for Analyzing Interactions of Argumentative Structure and Quality.,” 2024, doi: https://doi.org/10.48550/arXiv.2404.02529 .","chicago":"Rezat, Sara, Maja Stahl, Nadine Michel, Sebastian Kilsbach, Julian Schmidtke, and Henning Wachsmuth. “A School Student Essay Corpus for Analyzing Interactions of Argumentative Structure and Quality.,” 2024. https://doi.org/10.48550/arXiv.2404.02529 .","ama":"Rezat S, Stahl M, Michel N, Kilsbach S, Schmidtke J, Wachsmuth H. A School Student Essay Corpus for Analyzing Interactions of Argumentative Structure and Quality. In: ; 2024. doi:https://doi.org/10.48550/arXiv.2404.02529 ","short":"S. Rezat, M. Stahl, N. Michel, S. Kilsbach, J. Schmidtke, H. Wachsmuth, in: 2024.","bibtex":"@inproceedings{Rezat_Stahl_Michel_Kilsbach_Schmidtke_Wachsmuth_2024, title={A School Student Essay Corpus for Analyzing Interactions of Argumentative Structure and Quality.}, DOI={https://doi.org/10.48550/arXiv.2404.02529 }, author={Rezat, Sara and Stahl, Maja and Michel, Nadine and Kilsbach, Sebastian and Schmidtke, Julian and Wachsmuth, Henning}, year={2024} }"},"project":[{"grant_number":"453073654","_id":"646","name":"ArgSchool: Computergestütztes Lernen argumentativen Schreibens in der digitalen Schulbildung (DFG)"}],"quality_controlled":"1","language":[{"iso":"eng"}],"_id":"58899","main_file_link":[{"open_access":"1","url":"https://doi.org/10.48550/arXiv.2404.02529 "}],"doi":"https://doi.org/10.48550/arXiv.2404.02529 ","user_id":"47857","author":[{"first_name":"Sara","last_name":"Rezat","full_name":"Rezat, Sara","id":"58338"},{"last_name":"Stahl","first_name":"Maja","full_name":"Stahl, Maja"},{"full_name":"Michel, Nadine","last_name":"Michel","first_name":"Nadine","id":"47857"},{"first_name":"Sebastian","last_name":"Kilsbach","full_name":"Kilsbach, Sebastian","id":"93839"},{"full_name":"Schmidtke, Julian","first_name":"Julian","last_name":"Schmidtke"},{"full_name":"Wachsmuth, Henning","first_name":"Henning","last_name":"Wachsmuth"}],"status":"public","title":"A School Student Essay Corpus for Analyzing Interactions of Argumentative Structure and Quality.","year":"2024","date_updated":"2025-07-21T06:29:56Z"},{"_id":"57102","publisher":"Elsevier BV","page":"585-5D","volume":128,"user_id":"67999","conference":{"start_date":"2024-06-03","name":" 34th CIRP Design Conference","location":"Cranfield, UK","end_date":"2024-06-05"},"status":"public","oa":"1","citation":{"short":"I. Gräßler, D. Wiechel, S. Rarbach, in: Procedia CIRP, Elsevier BV, 2024, pp. 585–5D.","chicago":"Gräßler, Iris, Dominik Wiechel, and Sven Rarbach. “Model-Based Impact Analysis in Dynamic System of Systems.” In Procedia CIRP, 128:585-5D. Elsevier BV, 2024. https://doi.org/10.1016/j.procir.2024.06.032.","apa":"Gräßler, I., Wiechel, D., & Rarbach, S. (2024). Model-based impact analysis in dynamic System of Systems. Procedia CIRP, 128, 585-5D. https://doi.org/10.1016/j.procir.2024.06.032","ieee":"I. Gräßler, D. Wiechel, and S. Rarbach, “Model-based impact analysis in dynamic System of Systems,” in Procedia CIRP, Cranfield, UK, 2024, vol. 128, pp. 585–5D, doi: 10.1016/j.procir.2024.06.032.","ama":"Gräßler I, Wiechel D, Rarbach S. Model-based impact analysis in dynamic System of Systems. In: Procedia CIRP. Vol 128. Elsevier BV; 2024:585-5D. doi:10.1016/j.procir.2024.06.032","bibtex":"@inproceedings{Gräßler_Wiechel_Rarbach_2024, title={Model-based impact analysis in dynamic System of Systems}, volume={128}, DOI={10.1016/j.procir.2024.06.032}, booktitle={Procedia CIRP}, publisher={Elsevier BV}, author={Gräßler, Iris and Wiechel, Dominik and Rarbach, Sven}, year={2024}, pages={585–5D} }","mla":"Gräßler, Iris, et al. “Model-Based Impact Analysis in Dynamic System of Systems.” Procedia CIRP, vol. 128, Elsevier BV, 2024, pp. 585-5D, doi:10.1016/j.procir.2024.06.032."},"quality_controlled":"1","language":[{"iso":"eng"}],"main_file_link":[{"url":"https://www.sciencedirect.com/science/article/pii/S2212827124007133/pdf?md5=baf7db67591ba84f3da11a126c299ee8&pid=1-s2.0-S2212827124007133-main.pdf","open_access":"1"}],"doi":"10.1016/j.procir.2024.06.032","publication_identifier":{"issn":["2212-8271"]},"author":[{"id":"47565","full_name":"Gräßler, Iris","orcid":"0000-0001-5765-971X","first_name":"Iris","last_name":"Gräßler"},{"full_name":"Wiechel, Dominik","last_name":"Wiechel","first_name":"Dominik","id":"67161"},{"full_name":"Rarbach, Sven","first_name":"Sven","last_name":"Rarbach","id":"67999"}],"title":"Model-based impact analysis in dynamic System of Systems","year":"2024","intvolume":" 128","publication_status":"published","date_updated":"2025-08-30T11:03:08Z","date_created":"2024-11-15T07:39:58Z","department":[{"_id":"152"}],"type":"conference","publication":"Procedia CIRP"},{"oa":"1","citation":{"mla":"Frömmel, Lena, et al. “Open Edirom: From Hybrid Music Edition to Open Data Publication.” Proceedings of the 11th International Conference on Digital Libraries for Musicology, ACM, 2024, doi:10.1145/3660570.3660582.","bibtex":"@inproceedings{Frömmel_Bachmann_Plaksin_Münzmay_2024, title={Open Edirom: From hybrid music edition to open data publication}, DOI={10.1145/3660570.3660582}, booktitle={Proceedings of the 11th International Conference on Digital Libraries for Musicology}, publisher={ACM}, author={Frömmel, Lena and Bachmann, Tobias and Plaksin, Anna Viktoria Katrin and Münzmay, Andreas}, year={2024} }","ama":"Frömmel L, Bachmann T, Plaksin AVK, Münzmay A. Open Edirom: From hybrid music edition to open data publication. In: Proceedings of the 11th International Conference on Digital Libraries for Musicology. ACM; 2024. doi:10.1145/3660570.3660582","ieee":"L. Frömmel, T. Bachmann, A. V. K. Plaksin, and A. Münzmay, “Open Edirom: From hybrid music edition to open data publication,” 2024, doi: 10.1145/3660570.3660582.","apa":"Frömmel, L., Bachmann, T., Plaksin, A. V. K., & Münzmay, A. (2024). Open Edirom: From hybrid music edition to open data publication. Proceedings of the 11th International Conference on Digital Libraries for Musicology. https://doi.org/10.1145/3660570.3660582","chicago":"Frömmel, Lena, Tobias Bachmann, Anna Viktoria Katrin Plaksin, and Andreas Münzmay. “Open Edirom: From Hybrid Music Edition to Open Data Publication.” In Proceedings of the 11th International Conference on Digital Libraries for Musicology. ACM, 2024. https://doi.org/10.1145/3660570.3660582.","short":"L. Frömmel, T. Bachmann, A.V.K. Plaksin, A. Münzmay, in: Proceedings of the 11th International Conference on Digital Libraries for Musicology, ACM, 2024."},"quality_controlled":"1","project":[{"name":"KIO: KreativInstitut.OWL","_id":"1048"},{"name":"OPEN Edirom","_id":"1064"}],"_id":"54925","publisher":"ACM","user_id":"61139","status":"public","date_created":"2024-06-28T18:17:53Z","type":"conference","department":[{"_id":"233"},{"_id":"856"},{"_id":"615"}],"publication":"Proceedings of the 11th International Conference on Digital Libraries for Musicology","abstract":[{"text":"The OPEN Edirom project is developing a digital edition of incidental music for Goethe’s play Faust, representing an innovative initiative within the realm of music philology and MEI/TEI edition. Embracing the \"data first\" principle, OPEN Edirom prioritizes making its content openly accessible, thereby enabling diverse potential uses for researchers and performers. Our aim involves presenting the scholarly text and music edition in its entirety, incorporating its various forms of data, i.e. music, texts, source images, metadata, and annotations, all displayed with Edirom software.\r\nThe piece we edit in this project is Goethe’s renowned play Faust I, as adapted by Carl Seydelmann, along with the corresponding music composed by Peter Joseph von Lindpaintner for the Court Theatre in Stuttgart. The work premiered in 1832.\r\nThis paper delves into the concept of music edition as open data publication and delineates its advantages over analog and hybrid editions in terms of reusability and alignment with the FAIR principles. It also addresses the challenges encountered in data preparation, both specific to incidental music and in general data processing. Furthermore, we propose solutions and recommendations for similar projects based on our insights.","lang":"eng"}],"main_file_link":[{"open_access":"1","url":"https://dl.acm.org/doi/pdf/10.1145/3660570.3660582"}],"language":[{"iso":"eng"}],"doi":"10.1145/3660570.3660582","year":"2024","title":"Open Edirom: From hybrid music edition to open data publication","author":[{"id":"86796","first_name":"Lena","orcid":"0009-0009-6539-7081","last_name":"Frömmel","full_name":"Frömmel, Lena"},{"full_name":"Bachmann, Tobias","first_name":"Tobias","last_name":"Bachmann"},{"full_name":"Plaksin, Anna Viktoria Katrin","orcid":"0000-0002-9969-0608","first_name":"Anna Viktoria Katrin","last_name":"Plaksin","id":"102981"},{"full_name":"Münzmay, Andreas","orcid":"0000-0002-8373-4055","last_name":"Münzmay","first_name":"Andreas","id":"61139"}],"publication_status":"published","date_updated":"2025-09-02T09:11:50Z"},{"title":"Predictability of understanding in explanatory interactions based on multimodal cues","year":"2024","author":[{"first_name":"Olcay","last_name":"Türk","full_name":"Türk, Olcay"},{"last_name":"Lazarov","orcid":"0009-0009-0892-9483","first_name":"Stefan Teodorov","full_name":"Lazarov, Stefan Teodorov","id":"90345"},{"full_name":"Wang, Yu","first_name":"Yu","last_name":"Wang"},{"full_name":"Buschmeier, Hendrik","last_name":"Buschmeier","first_name":"Hendrik","orcid":"0000-0002-9613-5713","id":"76456"},{"id":"57578","first_name":"Angela","last_name":"Grimminger","full_name":"Grimminger, Angela"},{"full_name":"Wagner, Petra","first_name":"Petra","last_name":"Wagner","id":"74505"}],"date_updated":"2025-09-02T14:46:03Z","publication_status":"published","language":[{"iso":"eng"}],"doi":"10.1145/3678957.3685741","publication":"Proceedings of the 26th ACM International Conference on Multimodal Interaction","abstract":[{"lang":"eng","text":"In explanatory interactions, explainees are expected to continuously provide feedback to explainers by signaling whether they understand an ongoing explanation. The study presented in this paper is based on the hypothesis that explainees use a set of multimodal cues, including vocalizations, facial expressions, and movements of the torso, head, and hands, to do so. We test this hypothesis by building a random forest classifier based on a multimodal corpus of dyadic explanations (21 explainers and explainees), in which windows of understanding or non-understanding were identified by participants in a retrospective video recall task. Results show that sequences of understanding can indeed be differentiated from those of non-understanding, and that a diverse set of predictors covering a wide range of modalities contributes to this classification. Due to data sparsity and a high degree of individual variation, the generalizability of our results is currently limited, but they support our hypothesis of the relevance of multimodal display in explanatory interactions."}],"date_created":"2024-08-30T07:42:55Z","type":"conference","department":[{"_id":"660"}],"status":"public","conference":{"end_date":"2024-11-08","start_date":"2024-11-04","name":"The 26th ACM International Conference on Multimodal Interaction","location":"San José, Costa Rica"},"page":"449-458","_id":"55912","user_id":"57578","citation":{"chicago":"Türk, Olcay, Stefan Teodorov Lazarov, Yu Wang, Hendrik Buschmeier, Angela Grimminger, and Petra Wagner. “Predictability of Understanding in Explanatory Interactions Based on Multimodal Cues.” In Proceedings of the 26th ACM International Conference on Multimodal Interaction, 449–58. San José, Costa Rica, 2024. https://doi.org/10.1145/3678957.3685741.","short":"O. Türk, S.T. Lazarov, Y. Wang, H. Buschmeier, A. Grimminger, P. Wagner, in: Proceedings of the 26th ACM International Conference on Multimodal Interaction, San José, Costa Rica, 2024, pp. 449–458.","apa":"Türk, O., Lazarov, S. T., Wang, Y., Buschmeier, H., Grimminger, A., & Wagner, P. (2024). Predictability of understanding in explanatory interactions based on multimodal cues. Proceedings of the 26th ACM International Conference on Multimodal Interaction, 449–458. https://doi.org/10.1145/3678957.3685741","ieee":"O. Türk, S. T. Lazarov, Y. Wang, H. Buschmeier, A. Grimminger, and P. Wagner, “Predictability of understanding in explanatory interactions based on multimodal cues,” in Proceedings of the 26th ACM International Conference on Multimodal Interaction, San José, Costa Rica, 2024, pp. 449–458, doi: 10.1145/3678957.3685741.","ama":"Türk O, Lazarov ST, Wang Y, Buschmeier H, Grimminger A, Wagner P. Predictability of understanding in explanatory interactions based on multimodal cues. In: Proceedings of the 26th ACM International Conference on Multimodal Interaction. ; 2024:449-458. doi:10.1145/3678957.3685741","bibtex":"@inproceedings{Türk_Lazarov_Wang_Buschmeier_Grimminger_Wagner_2024, place={San José, Costa Rica}, title={Predictability of understanding in explanatory interactions based on multimodal cues}, DOI={10.1145/3678957.3685741}, booktitle={Proceedings of the 26th ACM International Conference on Multimodal Interaction}, author={Türk, Olcay and Lazarov, Stefan Teodorov and Wang, Yu and Buschmeier, Hendrik and Grimminger, Angela and Wagner, Petra}, year={2024}, pages={449–458} }","mla":"Türk, Olcay, et al. “Predictability of Understanding in Explanatory Interactions Based on Multimodal Cues.” Proceedings of the 26th ACM International Conference on Multimodal Interaction, 2024, pp. 449–58, doi:10.1145/3678957.3685741."},"quality_controlled":"1","project":[{"_id":"112","name":"TRR 318 - A02: TRR 318 - Verstehensprozess einer Erklärung beobachten und auswerten (Teilprojekt A02)"}],"place":"San José, Costa Rica"},{"publication":"PAMM","issue":"1","abstract":[{"lang":"eng","text":"AbstractControl engineering applications usually require a model that accurately represents the dynamics of the system. In addition to classical physical modeling, powerful data‐driven approaches are gaining popularity. However, the resulting models may not be ideal for control design due to their black‐box structure, which inherently limits interpretability. Formulating the system dynamics in port‐Hamiltonian form is highly beneficial, as its valuable property of passivity enables the straightforward design of globally stable controllers while ensuring physical interpretability. In a recently published article, we presented a method for data‐driven inference of port‐Hamiltonian models for complex mechatronic systems, requiring only fundamental physical prior knowledge. The resulting models accurately represent the nonlinear dynamics of the considered systems and are physically interpretable. In this contribution, we advance our previous work by including two key elements. Firstly, we demonstrate the application of the above described data‐driven PCHD models for controller design. Preserving the port‐Hamiltonian form in the closed loop not only guarantees global stability and robustness but also ensures desired speed and damping characteristics. Since control systems based on output measurements, which are continuously measured during operation due to the feedback structure, we secondly aim to use this data. Thus, we augment the existing modeling strategy with an intelligent adaptation approach to address uncertainties and (un)predictable system changes in mechatronic systems throughout their lifecycle, such as the installation of new components, wear, or temperature fluctuations during operation. Our proposed algorithm for recursively calculated data‐driven port‐Hamiltonian models utilizes a least‐squares approach with extensions such as automatically adjusting the forgetting factor and controlling the covariance matrix trace. We demonstrate the results through model‐based application on an academic example and experimental validation on a test bench."}],"date_created":"2025-01-01T16:11:38Z","department":[{"_id":"153"},{"_id":"880"}],"type":"journal_article","author":[{"full_name":"Junker, Annika","last_name":"Junker","orcid":"0009-0002-6475-2503","first_name":"Annika","id":"41470"},{"full_name":"Timmermann, Julia","last_name":"Timmermann","first_name":"Julia","id":"15402"},{"id":"552","full_name":"Trächtler, Ansgar","last_name":"Trächtler","first_name":"Ansgar"}],"publication_identifier":{"issn":["1617-7061","1617-7061"]},"year":"2024","title":"Adaptive Data‐Driven Models in Port‐Hamiltonian Form for Control Design","intvolume":" 25","publication_status":"published","date_updated":"2025-09-03T09:33:23Z","language":[{"iso":"eng"}],"main_file_link":[{"url":"https://onlinelibrary.wiley.com/doi/epdf/10.1002/pamm.202400154","open_access":"1"}],"doi":"10.1002/pamm.202400154","citation":{"short":"A. Junker, J. Timmermann, A. Trächtler, PAMM 25 (2024).","chicago":"Junker, Annika, Julia Timmermann, and Ansgar Trächtler. “Adaptive Data‐Driven Models in Port‐Hamiltonian Form for Control Design.” PAMM 25, no. 1 (2024). https://doi.org/10.1002/pamm.202400154.","apa":"Junker, A., Timmermann, J., & Trächtler, A. (2024). Adaptive Data‐Driven Models in Port‐Hamiltonian Form for Control Design. PAMM, 25(1). https://doi.org/10.1002/pamm.202400154","ieee":"A. Junker, J. Timmermann, and A. Trächtler, “Adaptive Data‐Driven Models in Port‐Hamiltonian Form for Control Design,” PAMM, vol. 25, no. 1, 2024, doi: 10.1002/pamm.202400154.","ama":"Junker A, Timmermann J, Trächtler A. Adaptive Data‐Driven Models in Port‐Hamiltonian Form for Control Design. PAMM. 2024;25(1). doi:10.1002/pamm.202400154","bibtex":"@article{Junker_Timmermann_Trächtler_2024, title={Adaptive Data‐Driven Models in Port‐Hamiltonian Form for Control Design}, volume={25}, DOI={10.1002/pamm.202400154}, number={1}, journal={PAMM}, publisher={Wiley}, author={Junker, Annika and Timmermann, Julia and Trächtler, Ansgar}, year={2024} }","mla":"Junker, Annika, et al. “Adaptive Data‐Driven Models in Port‐Hamiltonian Form for Control Design.” PAMM, vol. 25, no. 1, Wiley, 2024, doi:10.1002/pamm.202400154."},"project":[{"name":"DART: Datengetriebene Methoden in der Regelungstechnik","_id":"690"}],"quality_controlled":"1","oa":"1","status":"public","publisher":"Wiley","_id":"57893","volume":25,"user_id":"15402"},{"publication_status":"published","date_updated":"2025-09-11T09:49:07Z","intvolume":" 9","year":"2024","title":"ExPrompt: Augmenting Prompts Using Examples as Modern Baseline for Stance Classification","author":[{"first_name":"Umair","orcid":"0000-0001-6714-8729","last_name":"Qudus","full_name":"Qudus, Umair","id":"83392"},{"id":"67199","full_name":"Röder, Michael","first_name":"Michael","last_name":"Röder","orcid":"https://orcid.org/0000-0002-8609-8277"},{"last_name":"Vollmers","first_name":"Daniel","full_name":"Vollmers, Daniel"},{"id":"65716","full_name":"Ngonga Ngomo, Axel-Cyrille","first_name":"Axel-Cyrille","last_name":"Ngonga Ngomo"}],"publication_identifier":{"isbn":["79-8-4007-0436-9/24/10"]},"doi":"10.1145/3627673.3679923","main_file_link":[{"url":"https://dl.acm.org/doi/10.1145/3627673.3679923"}],"language":[{"iso":"eng"}],"abstract":[{"text":"Detecting the veracity of a statement automatically is a challenge the world is grappling with due to the vast amount of data spread across the web. Verifying a given claim typically entails validating it within the framework of supporting evidence like a retrieved piece of text. Classifying the stance of the text with respect to the claim is called stance classification. Despite advancements in automated fact-checking, most systems still rely on a substantial quantity of labeled training data, which can be costly. In this work, we avoid the costly training or fine-tuning of models by reusing pre-trained large language models together with few-shot in-context learning. Since we do not train any model, our approach ExPrompt is lightweight, demands fewer resources than other stance classification methods and can serve as a modern baseline for future developments. At the same time, our evaluation shows that our approach is able to outperform former state-of-the-art stance classification approaches regarding accuracy by at least 2 percent. Our scripts and data used in this paper are available at https://github.com/dice-group/ExPrompt.","lang":"eng"}],"publication":"Proceedings of the 33rd ACM International Conference on Information and Knowledge Management","keyword":["Stance Classification","Few-shot in-context learning","Pre-trained large language models"],"type":"conference","file":[{"creator":"uqudus","date_created":"2024-11-11T13:24:19Z","access_level":"closed","file_size":531579,"file_name":"public.pdf","date_updated":"2024-11-11T13:24:19Z","relation":"main_file","content_type":"application/pdf","success":1,"file_id":"56984"}],"date_created":"2024-11-11T13:15:25Z","has_accepted_license":"1","status":"public","conference":{"location":"Boise, ID, USA","start_date":"2024-10-21","name":"CIKM '24: Proceedings of the 33rd ACM International Conference on Information and Knowledge Management","end_date":"2024-10-25"},"user_id":"83392","ddc":["006"],"volume":9,"page":"3994 - 3999","publisher":"ACM","_id":"56983","quality_controlled":"1","project":[{"name":"NEBULA: Nutzerzentrierte KI-basierte Erkennung von Fake-News und Fehlinformationen","_id":"412"}],"popular_science":"1","file_date_updated":"2024-11-11T13:24:19Z","citation":{"ieee":"U. Qudus, M. Röder, D. Vollmers, and A.-C. Ngonga Ngomo, “ExPrompt: Augmenting Prompts Using Examples as Modern Baseline for Stance Classification,” in Proceedings of the 33rd ACM International Conference on Information and Knowledge Management, Boise, ID, USA, 2024, vol. 9, pp. 3994–3999, doi: 10.1145/3627673.3679923.","apa":"Qudus, U., Röder, M., Vollmers, D., & Ngonga Ngomo, A.-C. (2024). ExPrompt: Augmenting Prompts Using Examples as Modern Baseline for Stance Classification. Proceedings of the 33rd ACM International Conference on Information and Knowledge Management, 9, 3994–3999. https://doi.org/10.1145/3627673.3679923","short":"U. Qudus, M. Röder, D. Vollmers, A.-C. Ngonga Ngomo, in: Proceedings of the 33rd ACM International Conference on Information and Knowledge Management, ACM, 2024, pp. 3994–3999.","chicago":"Qudus, Umair, Michael Röder, Daniel Vollmers, and Axel-Cyrille Ngonga Ngomo. “ExPrompt: Augmenting Prompts Using Examples as Modern Baseline for Stance Classification.” In Proceedings of the 33rd ACM International Conference on Information and Knowledge Management, 9:3994–99. ACM, 2024. https://doi.org/10.1145/3627673.3679923.","mla":"Qudus, Umair, et al. “ExPrompt: Augmenting Prompts Using Examples as Modern Baseline for Stance Classification.” Proceedings of the 33rd ACM International Conference on Information and Knowledge Management, vol. 9, ACM, 2024, pp. 3994–99, doi:10.1145/3627673.3679923.","bibtex":"@inproceedings{Qudus_Röder_Vollmers_Ngonga Ngomo_2024, title={ExPrompt: Augmenting Prompts Using Examples as Modern Baseline for Stance Classification}, volume={9}, DOI={10.1145/3627673.3679923}, booktitle={Proceedings of the 33rd ACM International Conference on Information and Knowledge Management}, publisher={ACM}, author={Qudus, Umair and Röder, Michael and Vollmers, Daniel and Ngonga Ngomo, Axel-Cyrille}, year={2024}, pages={3994–3999} }","ama":"Qudus U, Röder M, Vollmers D, Ngonga Ngomo A-C. ExPrompt: Augmenting Prompts Using Examples as Modern Baseline for Stance Classification. In: Proceedings of the 33rd ACM International Conference on Information and Knowledge Management. Vol 9. ACM; 2024:3994-3999. doi:10.1145/3627673.3679923"}},{"_id":"57240","user_id":"83392","ddc":["600"],"editor":[{"full_name":"Rospocher, Marco","first_name":"Marco","last_name":"Rospocher"}],"status":"public","conference":{"end_date":"2024-11-28","location":"Amsterdam, Netherlands","name":"24th International Conference on Knowledge Engineering and Knowledge Management","start_date":"2024-11-26"},"has_accepted_license":"1","file_date_updated":"2024-11-19T14:14:14Z","popular_science":"1","citation":{"chicago":"Qudus, Umair, Michael Röder, Franck Lionel Tatkeu Pekarou, Ana Alexandra Morim da Silva, and Axel-Cyrille Ngonga Ngomo. “FaVEL: Fact Validation Ensemble Learning.” In EKAW 2024, edited by Marco Rospocher and Mehwish Alam, 2024.","short":"U. Qudus, M. Röder, F.L. Tatkeu Pekarou, A.A. Morim da Silva, A.-C. Ngonga Ngomo, in: M. Rospocher, Mehwish Alam (Eds.), EKAW 2024, 2024.","ieee":"U. Qudus, M. Röder, F. L. Tatkeu Pekarou, A. A. Morim da Silva, and A.-C. Ngonga Ngomo, “FaVEL: Fact Validation Ensemble Learning,” in EKAW 2024, Amsterdam, Netherlands, 2024.","apa":"Qudus, U., Röder, M., Tatkeu Pekarou, F. L., Morim da Silva, A. A., & Ngonga Ngomo, A.-C. (2024). FaVEL: Fact Validation Ensemble Learning. In M. Rospocher & Mehwish Alam (Eds.), EKAW 2024.","bibtex":"@inproceedings{Qudus_Röder_Tatkeu Pekarou_Morim da Silva_Ngonga Ngomo_2024, title={FaVEL: Fact Validation Ensemble Learning}, booktitle={EKAW 2024}, author={Qudus, Umair and Röder, Michael and Tatkeu Pekarou, Franck Lionel and Morim da Silva, Ana Alexandra and Ngonga Ngomo, Axel-Cyrille}, editor={Rospocher, Marco and Mehwish Alam}, year={2024} }","ama":"Qudus U, Röder M, Tatkeu Pekarou FL, Morim da Silva AA, Ngonga Ngomo A-C. FaVEL: Fact Validation Ensemble Learning. In: Rospocher M, Mehwish Alam, eds. EKAW 2024. ; 2024.","mla":"Qudus, Umair, et al. “FaVEL: Fact Validation Ensemble Learning.” EKAW 2024, edited by Marco Rospocher and Mehwish Alam, 2024."},"quality_controlled":"1","project":[{"name":"NEBULA: Nutzerzentrierte KI-basierte Erkennung von Fake-News und Fehlinformationen","_id":"412"},{"name":"SAIL: SAIL - Nachhaltiger Lebenszyklus von intelligenten soziotechnischen Systemen","_id":"285"},{"_id":"410","name":"KnowGraphs: KnowGraphs: Knowledge Graphs at Scale"}],"language":[{"iso":"eng"}],"year":"2024","title":"FaVEL: Fact Validation Ensemble Learning","corporate_editor":["Mehwish Alam"],"author":[{"id":"83392","full_name":"Qudus, Umair","orcid":"0000-0001-6714-8729","last_name":"Qudus","first_name":"Umair"},{"full_name":"Röder, Michael","orcid":"https://orcid.org/0000-0002-8609-8277","last_name":"Röder","first_name":"Michael","id":"67199"},{"full_name":"Tatkeu Pekarou, Franck Lionel","last_name":"Tatkeu Pekarou","first_name":"Franck Lionel"},{"id":"72108","last_name":"Morim da Silva","first_name":"Ana Alexandra","full_name":"Morim da Silva, Ana Alexandra"},{"id":"65716","full_name":"Ngonga Ngomo, Axel-Cyrille","last_name":"Ngonga Ngomo","first_name":"Axel-Cyrille"}],"date_updated":"2025-09-11T09:48:12Z","file":[{"date_created":"2024-11-19T14:14:14Z","creator":"uqudus","file_id":"57241","success":1,"content_type":"application/pdf","relation":"main_file","date_updated":"2024-11-19T14:14:14Z","file_name":"favel.pdf","access_level":"closed","file_size":190661}],"date_created":"2024-11-19T14:12:49Z","keyword":["fact checking","ensemble learning","transfer learning","knowledge management."],"type":"conference","department":[{"_id":"34"}],"publication":"EKAW 2024","abstract":[{"text":"Validating assertions before adding them to a knowledge graph is an essential part of its creation and maintenance. Due to the sheer size of knowledge graphs, automatic fact-checking approaches have been developed. These approaches rely on reference knowledge to decide whether a given assertion is correct. Recent hybrid approaches achieve good results by including several knowledge sources. However, it is often impractical to provide a sheer quantity of textual knowledge or generate embedding models to leverage these hybrid approaches. We present FaVEL, an approach that uses algorithm selection and ensemble learning to amalgamate several existing fact-checking approaches that rely solely on a reference knowledge graph and, hence, use fewer resources than current hybrid approaches. For our evaluation, we create updated versions of two existing datasets and a new dataset dubbed FaVEL-DS. Our evaluation compares our approach to 15 fact-checking approaches—including the state-of-the-art approach HybridFC—on 3 datasets. Our results demonstrate that FaVEL outperforms all other approaches significantly by at least 0.04 in terms of the area under the ROC curve. Our source code, datasets, and evaluation results are open-source and can be found at https://github.com/dice-group/favel.","lang":"eng"}]},{"status":"public","conference":{"name":"2024 Conference on Empirical Methods in Natural Language Processing (EMNLP)","start_date":"2024-11-12","location":"Miami, FL, USA","end_date":"2024-11-16"},"user_id":"76456","page":"19459–19475","_id":"61179","publisher":"ACL","quality_controlled":"1","project":[{"name":"TRR 318; TP A02: Verstehensprozess einer Erklärung beobachten und auswerten","_id":"112"}],"citation":{"ieee":"J. Sieker et al., “The illusion of competence: Evaluating the effect of explanations on users’ mental models of visual question answering systems,” in Proceedings of the 2024 Conference on Empirical Methods in Natural Language Processing, Miami, FL, USA, 2024, pp. 19459–19475, doi: 10.18653/v1/2024.emnlp-main.1084.","apa":"Sieker, J., Junker, S., Utescher, R., Attari, N., Wersing, H., Buschmeier, H., & Zarrieß, S. (2024). The illusion of competence: Evaluating the effect of explanations on users’ mental models of visual question answering systems. Proceedings of the 2024 Conference on Empirical Methods in Natural Language Processing, 19459–19475. https://doi.org/10.18653/v1/2024.emnlp-main.1084","chicago":"Sieker, Judith, Simeon Junker, Ronja Utescher, Nazia Attari, Heiko Wersing, Hendrik Buschmeier, and Sina Zarrieß. “The Illusion of Competence: Evaluating the Effect of Explanations on Users’ Mental Models of Visual Question Answering Systems.” In Proceedings of the 2024 Conference on Empirical Methods in Natural Language Processing, 19459–19475. Miami, FL, USA: ACL, 2024. https://doi.org/10.18653/v1/2024.emnlp-main.1084.","short":"J. Sieker, S. Junker, R. Utescher, N. Attari, H. Wersing, H. Buschmeier, S. Zarrieß, in: Proceedings of the 2024 Conference on Empirical Methods in Natural Language Processing, ACL, Miami, FL, USA, 2024, pp. 19459–19475.","mla":"Sieker, Judith, et al. “The Illusion of Competence: Evaluating the Effect of Explanations on Users’ Mental Models of Visual Question Answering Systems.” Proceedings of the 2024 Conference on Empirical Methods in Natural Language Processing, ACL, 2024, pp. 19459–19475, doi:10.18653/v1/2024.emnlp-main.1084.","bibtex":"@inproceedings{Sieker_Junker_Utescher_Attari_Wersing_Buschmeier_Zarrieß_2024, place={Miami, FL, USA}, title={The illusion of competence: Evaluating the effect of explanations on users’ mental models of visual question answering systems}, DOI={10.18653/v1/2024.emnlp-main.1084}, booktitle={Proceedings of the 2024 Conference on Empirical Methods in Natural Language Processing}, publisher={ACL}, author={Sieker, Judith and Junker, Simeon and Utescher, Ronja and Attari, Nazia and Wersing, Heiko and Buschmeier, Hendrik and Zarrieß, Sina}, year={2024}, pages={19459–19475} }","ama":"Sieker J, Junker S, Utescher R, et al. The illusion of competence: Evaluating the effect of explanations on users’ mental models of visual question answering systems. In: Proceedings of the 2024 Conference on Empirical Methods in Natural Language Processing. ACL; 2024:19459–19475. doi:10.18653/v1/2024.emnlp-main.1084"},"oa":"1","place":"Miami, FL, USA","date_updated":"2025-09-11T10:14:50Z","publication_status":"published","title":"The illusion of competence: Evaluating the effect of explanations on users’ mental models of visual question answering systems","year":"2024","author":[{"last_name":"Sieker","first_name":"Judith","full_name":"Sieker, Judith"},{"full_name":"Junker, Simeon","first_name":"Simeon","last_name":"Junker"},{"first_name":"Ronja","last_name":"Utescher","full_name":"Utescher, Ronja"},{"first_name":"Nazia","last_name":"Attari","full_name":"Attari, Nazia"},{"full_name":"Wersing, Heiko","first_name":"Heiko","last_name":"Wersing"},{"full_name":"Buschmeier, Hendrik","last_name":"Buschmeier","first_name":"Hendrik","orcid":"0000-0002-9613-5713","id":"76456"},{"first_name":"Sina","last_name":"Zarrieß","full_name":"Zarrieß, Sina"}],"doi":"10.18653/v1/2024.emnlp-main.1084","main_file_link":[{"url":"https://doi.org/10.18653/v1/2024.emnlp-main.1084","open_access":"1"}],"language":[{"iso":"eng"}],"abstract":[{"text":"We examine how users perceive the limitations of an AI system when it encounters a task that it cannot perform perfectly and whether providing explanations alongside its answers aids users in constructing an appropriate mental model of the system's capabilities and limitations. We employ a visual question answer and explanation task where we control the AI system's limitations by manipulating the visual inputs: during inference, the system either processes full-color or grayscale images. Our goal is to determine whether participants can perceive the limitations of the system. We hypothesize that explanations will make limited AI capabilities more transparent to users. However, our results show that explanations do not have this effect. Instead of allowing users to more accurately assess the limitations of the AI system, explanations generally increase users' perceptions of the system's competence – regardless of its actual performance.","lang":"eng"}],"extern":"1","publication":"Proceedings of the 2024 Conference on Empirical Methods in Natural Language Processing","type":"conference","department":[{"_id":"660"}],"date_created":"2025-09-11T07:22:05Z"},{"date_created":"2026-03-18T12:24:07Z","type":"conference","department":[{"_id":"9"},{"_id":"321"},{"_id":"367"}],"publication":"AIP Conference Proceedings","citation":{"bibtex":"@inproceedings{Albrecht_Bialaschik_Gehde_Schöppner_2024, title={Serial hot gas welding - Heating and welding behaviour of a slot nozzle}, volume={3181}, DOI={10.1063/5.0192316}, booktitle={AIP Conference Proceedings}, publisher={AIP Publishing}, author={Albrecht, Mirko and Bialaschik, Max Oliver and Gehde, Michael and Schöppner, Volker}, year={2024} }","ama":"Albrecht M, Bialaschik MO, Gehde M, Schöppner V. Serial hot gas welding - Heating and welding behaviour of a slot nozzle. In: AIP Conference Proceedings. Vol 3181. AIP Publishing; 2024. doi:10.1063/5.0192316","short":"M. Albrecht, M.O. Bialaschik, M. Gehde, V. Schöppner, in: AIP Conference Proceedings, AIP Publishing, 2024.","chicago":"Albrecht, Mirko, Max Oliver Bialaschik, Michael Gehde, and Volker Schöppner. “Serial Hot Gas Welding - Heating and Welding Behaviour of a Slot Nozzle.” In AIP Conference Proceedings, Vol. 3181. AIP Publishing, 2024. https://doi.org/10.1063/5.0192316.","ieee":"M. Albrecht, M. O. Bialaschik, M. Gehde, and V. Schöppner, “Serial hot gas welding - Heating and welding behaviour of a slot nozzle,” in AIP Conference Proceedings, 2024, vol. 3181, doi: 10.1063/5.0192316.","apa":"Albrecht, M., Bialaschik, M. O., Gehde, M., & Schöppner, V. (2024). Serial hot gas welding - Heating and welding behaviour of a slot nozzle. AIP Conference Proceedings, 3181. https://doi.org/10.1063/5.0192316","mla":"Albrecht, Mirko, et al. “Serial Hot Gas Welding - Heating and Welding Behaviour of a Slot Nozzle.” AIP Conference Proceedings, vol. 3181, AIP Publishing, 2024, doi:10.1063/5.0192316."},"quality_controlled":"1","_id":"65052","publisher":"AIP Publishing","language":[{"iso":"eng"}],"doi":"10.1063/5.0192316","user_id":"59363","volume":3181,"title":"Serial hot gas welding - Heating and welding behaviour of a slot nozzle","status":"public","year":"2024","publication_identifier":{"issn":["0094-243X"]},"author":[{"full_name":"Albrecht, Mirko","last_name":"Albrecht","first_name":"Mirko"},{"id":"32297","first_name":"Max Oliver","last_name":"Bialaschik","full_name":"Bialaschik, Max Oliver"},{"full_name":"Gehde, Michael","first_name":"Michael","last_name":"Gehde"},{"id":"20530","full_name":"Schöppner, Volker","last_name":"Schöppner","first_name":"Volker"}],"date_updated":"2026-03-18T12:24:42Z","publication_status":"published","intvolume":" 3181"},{"year":"2024","title":"Effect of Substrate Temperature on Bead Track Geometry of 316L in Directed Energy Deposition: Investigation and Regression Modeling","author":[{"last_name":"Chalicheemalapalli Jayasankar","first_name":"Deviprasad","orcid":"https://orcid.org/ 0000-0002-3446-2444","full_name":"Chalicheemalapalli Jayasankar, Deviprasad","id":"49504"},{"id":"25730","full_name":"Gnaase, Stefan","last_name":"Gnaase","first_name":"Stefan"},{"id":"90491","full_name":"Lehnert, Dennis","last_name":"Lehnert","first_name":"Dennis"},{"full_name":"Walter, Artur","last_name":"Walter","first_name":"Artur"},{"full_name":"Rohling, Robin","first_name":"Robin","last_name":"Rohling"},{"id":"553","last_name":"Tröster","first_name":"Thomas","full_name":"Tröster, Thomas"}],"publication_identifier":{"issn":["2075-4701"]},"publication_status":"published","date_updated":"2026-03-20T08:44:28Z","article_type":"original","intvolume":" 14","article_number":"1353","main_file_link":[{"open_access":"1","url":"https://www.mdpi.com/2075-4701/14/12/1353"}],"language":[{"iso":"eng"}],"doi":"10.3390/met14121353","issue":"12","publication":"Metals","abstract":[{"lang":"eng","text":"The optimization of process parameters in powder Directed Energy Deposition (DED) is essential for achieving consistent, high-quality bead geometries, which directly influence the performance and structural integrity of fabricated components. As a subset of additive manufacturing (AM), the DED process, also referred to as laser metal deposition (LMD), enables precise, layer-by-layer material deposition, making it highly suitable for complex geometries and part repair applications. Critical parameters, such as the laser power, feed rate, powder mass flow, and substrate temperature govern the deposition process, impacting the bead height, width, contact angle, and dilution. Inconsistent control over these variables can lead to defects, such as poor bonding, dimensional inaccuracies, and material weaknesses, ultimately compromising the final product. This paper investigates the effects of various process parameters, specifically the substrate temperature, on bead track geometry in DED processes for stainless steel (1.4404). A specialized experimental setup, integrated within a DED machine, facilitates the controlled thermal conditioning of sample sheets. Using Design of Experiments (DoE) methods, individual bead marks are generated and analyzed to assess geometric characteristics. Regression models, including both linear and quadratic approaches, are constructed to predict machine parameters for achieving the desired bead geometry at different substrate temperatures. Validation experiments confirm the accuracy and reliability of the models, particularly in predicting the bead height, bead width, and contact angle across a broad range of substrate temperatures. However, the models demonstrated limitations in accurately predicting dilution, indicating the need for further refinement. Despite some deviations in measured values, successful fabrication is achieved, demonstrating robust bonding between the bead and substrate. The developed models offer insights into optimizing DED process parameters to achieve desired bead characteristics, advancing the precision and reliability of additive manufacturing technology. Future work will focus on refining the regression models to improve predictions, particularly for dilution, and further investigate non-linear interactions between process variables."}],"date_created":"2024-12-10T12:13:23Z","type":"journal_article","keyword":["additive manufacturing","direct energy deposition","laser metal deposition"],"department":[{"_id":"321"},{"_id":"149"},{"_id":"9"}],"status":"public","has_accepted_license":"1","publisher":"MDPI AG","_id":"57699","user_id":"49504","ddc":["670"],"volume":14,"citation":{"mla":"Chalicheemalapalli Jayasankar, Deviprasad, et al. “Effect of Substrate Temperature on Bead Track Geometry of 316L in Directed Energy Deposition: Investigation and Regression Modeling.” Metals, vol. 14, no. 12, 1353, MDPI AG, 2024, doi:10.3390/met14121353.","bibtex":"@article{Chalicheemalapalli Jayasankar_Gnaase_Lehnert_Walter_Rohling_Tröster_2024, title={Effect of Substrate Temperature on Bead Track Geometry of 316L in Directed Energy Deposition: Investigation and Regression Modeling}, volume={14}, DOI={10.3390/met14121353}, number={121353}, journal={Metals}, publisher={MDPI AG}, author={Chalicheemalapalli Jayasankar, Deviprasad and Gnaase, Stefan and Lehnert, Dennis and Walter, Artur and Rohling, Robin and Tröster, Thomas}, year={2024} }","ama":"Chalicheemalapalli Jayasankar D, Gnaase S, Lehnert D, Walter A, Rohling R, Tröster T. Effect of Substrate Temperature on Bead Track Geometry of 316L in Directed Energy Deposition: Investigation and Regression Modeling. Metals. 2024;14(12). doi:10.3390/met14121353","ieee":"D. Chalicheemalapalli Jayasankar, S. Gnaase, D. Lehnert, A. Walter, R. Rohling, and T. Tröster, “Effect of Substrate Temperature on Bead Track Geometry of 316L in Directed Energy Deposition: Investigation and Regression Modeling,” Metals, vol. 14, no. 12, Art. no. 1353, 2024, doi: 10.3390/met14121353.","apa":"Chalicheemalapalli Jayasankar, D., Gnaase, S., Lehnert, D., Walter, A., Rohling, R., & Tröster, T. (2024). Effect of Substrate Temperature on Bead Track Geometry of 316L in Directed Energy Deposition: Investigation and Regression Modeling. Metals, 14(12), Article 1353. https://doi.org/10.3390/met14121353","chicago":"Chalicheemalapalli Jayasankar, Deviprasad, Stefan Gnaase, Dennis Lehnert, Artur Walter, Robin Rohling, and Thomas Tröster. “Effect of Substrate Temperature on Bead Track Geometry of 316L in Directed Energy Deposition: Investigation and Regression Modeling.” Metals 14, no. 12 (2024). https://doi.org/10.3390/met14121353.","short":"D. Chalicheemalapalli Jayasankar, S. Gnaase, D. Lehnert, A. Walter, R. Rohling, T. Tröster, Metals 14 (2024)."},"quality_controlled":"1","oa":"1"},{"abstract":[{"text":"Additive manufacturing (AM) technologies enable near-net-shape designs and demand-oriented material usage, which significantly minimizes waste. This points to a substantial opportunity for further optimization in material savings and process design. The current study delves into the advancement of sustainable manufacturing practices in the automotive industry, emphasizing the crucial role of lightweight construction concepts and AM technologies in enhancing resource efficiency and reducing greenhouse gas emissions. By exploring the integration of novel AM techniques such as selective laser melting (SLM) and laser metal deposition (LMD), the study aims to overcome existing limitations like slow build-up rates and limited component resolution. The study’s core objective revolves around the development and validation of a continuous process chain that synergizes different AM routes. In the current study, the continuous process chain for DMG MORI Lasertec 65 3D’s LMD system and the DMG MORI Lasertec 30 3D’s was demonstrated using 316L and 1.2709 steel materials. This integrated approach is designed to significantly curtail process times and minimize component costs, thus suggesting an industry-oriented process chain for future manufacturing paradigms. Additionally, the research investigates the production and material behavior of components under varying manufacturing processes, material combinations, and boundary layer materials. The culmination of this study is the validation of the proposed process route through a technology demonstrator, assessing its scalability and setting a benchmark for resource-efficient manufacturing in the automotive sector.","lang":"eng"}],"publication":"Metals","issue":"7","type":"journal_article","keyword":["additive manufacturing (AM)","selective laser melting (SLM)","laser metal deposition (LMD)","hybrid manufacturing","process optimization","316L","1.2709"],"department":[{"_id":"9"},{"_id":"321"},{"_id":"149"}],"date_created":"2024-09-10T10:19:32Z","publication_status":"published","date_updated":"2026-03-20T08:44:23Z","article_type":"original","intvolume":" 14","year":"2024","title":"Advancements in Hybrid Additive Manufacturing: Integrating SLM and LMD for High-Performance Applications","author":[{"id":"49504","last_name":"Chalicheemalapalli Jayasankar","orcid":"https://orcid.org/ 0000-0002-3446-2444","first_name":"Deviprasad","full_name":"Chalicheemalapalli Jayasankar, Deviprasad"},{"full_name":"Gnaase, Stefan","last_name":"Gnaase","first_name":"Stefan","id":"25730"},{"last_name":"Kaiser","first_name":"Maximilian Alexander","orcid":"0009-0008-1333-3396","full_name":"Kaiser, Maximilian Alexander","id":"72351"},{"id":"90491","full_name":"Lehnert, Dennis","last_name":"Lehnert","first_name":"Dennis"},{"id":"553","full_name":"Tröster, Thomas","first_name":"Thomas","last_name":"Tröster"}],"publication_identifier":{"issn":["2075-4701"]},"doi":"10.3390/met14070772","article_number":"772","main_file_link":[{"open_access":"1","url":"https://www.mdpi.com/2075-4701/14/7/772"}],"language":[{"iso":"eng"}],"quality_controlled":"1","citation":{"ieee":"D. Chalicheemalapalli Jayasankar, S. Gnaase, M. A. Kaiser, D. Lehnert, and T. Tröster, “Advancements in Hybrid Additive Manufacturing: Integrating SLM and LMD for High-Performance Applications,” Metals, vol. 14, no. 7, Art. no. 772, 2024, doi: 10.3390/met14070772.","mla":"Chalicheemalapalli Jayasankar, Deviprasad, et al. “Advancements in Hybrid Additive Manufacturing: Integrating SLM and LMD for High-Performance Applications.” Metals, vol. 14, no. 7, 772, MDPI AG, 2024, doi:10.3390/met14070772.","apa":"Chalicheemalapalli Jayasankar, D., Gnaase, S., Kaiser, M. A., Lehnert, D., & Tröster, T. (2024). Advancements in Hybrid Additive Manufacturing: Integrating SLM and LMD for High-Performance Applications. Metals, 14(7), Article 772. https://doi.org/10.3390/met14070772","bibtex":"@article{Chalicheemalapalli Jayasankar_Gnaase_Kaiser_Lehnert_Tröster_2024, title={Advancements in Hybrid Additive Manufacturing: Integrating SLM and LMD for High-Performance Applications}, volume={14}, DOI={10.3390/met14070772}, number={7772}, journal={Metals}, publisher={MDPI AG}, author={Chalicheemalapalli Jayasankar, Deviprasad and Gnaase, Stefan and Kaiser, Maximilian Alexander and Lehnert, Dennis and Tröster, Thomas}, year={2024} }","ama":"Chalicheemalapalli Jayasankar D, Gnaase S, Kaiser MA, Lehnert D, Tröster T. Advancements in Hybrid Additive Manufacturing: Integrating SLM and LMD for High-Performance Applications. Metals. 2024;14(7). doi:10.3390/met14070772","short":"D. Chalicheemalapalli Jayasankar, S. Gnaase, M.A. Kaiser, D. Lehnert, T. Tröster, Metals 14 (2024).","chicago":"Chalicheemalapalli Jayasankar, Deviprasad, Stefan Gnaase, Maximilian Alexander Kaiser, Dennis Lehnert, and Thomas Tröster. “Advancements in Hybrid Additive Manufacturing: Integrating SLM and LMD for High-Performance Applications.” Metals 14, no. 7 (2024). https://doi.org/10.3390/met14070772."},"oa":"1","status":"public","user_id":"49504","volume":14,"publisher":"MDPI AG","_id":"56089"},{"_id":"55743","publisher":"MDPI AG","volume":8,"user_id":"338","status":"public","citation":{"ieee":"H. Irmak, S. R. Tinkloh, T. Marten, and T. Tröster, “Development of a Tool Concept for Prestressed Fibre Metal Laminates and Their Effect on Interface Failure,” Journal of Composites Science, vol. 8, no. 8, Art. no. 316, 2024, doi: 10.3390/jcs8080316.","apa":"Irmak, H., Tinkloh, S. R., Marten, T., & Tröster, T. (2024). Development of a Tool Concept for Prestressed Fibre Metal Laminates and Their Effect on Interface Failure. Journal of Composites Science, 8(8), Article 316. https://doi.org/10.3390/jcs8080316","chicago":"Irmak, Hayrettin, Steffen Rainer Tinkloh, Thorsten Marten, and Thomas Tröster. “Development of a Tool Concept for Prestressed Fibre Metal Laminates and Their Effect on Interface Failure.” Journal of Composites Science 8, no. 8 (2024). https://doi.org/10.3390/jcs8080316.","short":"H. Irmak, S.R. Tinkloh, T. Marten, T. Tröster, Journal of Composites Science 8 (2024).","mla":"Irmak, Hayrettin, et al. “Development of a Tool Concept for Prestressed Fibre Metal Laminates and Their Effect on Interface Failure.” Journal of Composites Science, vol. 8, no. 8, 316, MDPI AG, 2024, doi:10.3390/jcs8080316.","bibtex":"@article{Irmak_Tinkloh_Marten_Tröster_2024, title={Development of a Tool Concept for Prestressed Fibre Metal Laminates and Their Effect on Interface Failure}, volume={8}, DOI={10.3390/jcs8080316}, number={8316}, journal={Journal of Composites Science}, publisher={MDPI AG}, author={Irmak, Hayrettin and Tinkloh, Steffen Rainer and Marten, Thorsten and Tröster, Thomas}, year={2024} }","ama":"Irmak H, Tinkloh SR, Marten T, Tröster T. Development of a Tool Concept for Prestressed Fibre Metal Laminates and Their Effect on Interface Failure. Journal of Composites Science. 2024;8(8). doi:10.3390/jcs8080316"},"quality_controlled":"1","language":[{"iso":"eng"}],"article_number":"316","doi":"10.3390/jcs8080316","author":[{"id":"75657","full_name":"Irmak, Hayrettin","first_name":"Hayrettin","orcid":"https://orcid.org/0009-0009-6267-2957","last_name":"Irmak"},{"id":"72722","last_name":"Tinkloh","first_name":"Steffen Rainer","full_name":"Tinkloh, Steffen Rainer"},{"first_name":"Thorsten","orcid":"0009-0001-6433-7839","last_name":"Marten","full_name":"Marten, Thorsten","id":"338"},{"last_name":"Tröster","first_name":"Thomas","full_name":"Tröster, Thomas","id":"553"}],"publication_identifier":{"issn":["2504-477X"]},"title":"Development of a Tool Concept for Prestressed Fibre Metal Laminates and Their Effect on Interface Failure","year":"2024","intvolume":" 8","article_type":"original","date_updated":"2026-03-23T10:31:09Z","publication_status":"published","date_created":"2024-08-23T06:47:27Z","department":[{"_id":"9"},{"_id":"321"},{"_id":"149"}],"keyword":["CFRP","prestressing","fibre metal laminate","interface","prepreg","shear tensile test"],"type":"journal_article","issue":"8","publication":"Journal of Composites Science","abstract":[{"lang":"eng","text":"The use of hybrid materials as a combination of fibre-reinforced plastic (FRP) and metal is of great interest in order to meet the increasing demands for sustainability, efficiency, and emission reduction based on the principle of lightweight design. These two components can therefore be joined using the intrinsic joining technique, which is formed by curing the matrix of the FRP component. In this study, for the hybrid joint, unidirectionally pre-impregnated semi-finished products (prepregs) with duromer matrix resin and micro-alloyed HC340LA steel were used. In order to conduct a detailed investigation, the damage mechanisms of intrinsically produced fibre metal laminates (FMLs), a new clamping device, and a novel pressing tool were designed and put into operation. The prepregs were prestressed by applying a preloading force using a specially designed prestressing frame. Hybrid specimens were then produced and subjected to nanoindentation and a shear tensile test. In particular, the effect of the residual stress state by varying the defined prestressing force on the damage mechanisms was studied. The results showed that no fracture patterns occurred in the interface of the specimens without preloading as a result of curing at 120 °C, whereas specimens with preloading failed at the boundary layer in the tensile range. Nevertheless, all specimens cured at 160 °C failed at the boundary layer in the tensile range. Furthermore, it was proven that the force and displacement of the preloaded specimens were promisingly higher than those of the unpreloaded specimens."}]},{"department":[{"_id":"36"},{"_id":"20"},{"_id":"500"}],"type":"book_chapter","date_created":"2026-03-27T07:55:48Z","file":[{"file_size":1334409,"access_level":"closed","file_name":"BiKu_2024_05_Keuchen_Lerke_Jesus-Darstellungen.pdf","date_updated":"2026-03-27T07:47:21Z","relation":"main_file","success":1,"content_type":"application/pdf","file_id":"65162","creator":"keuchen","date_created":"2026-03-27T07:47:21Z"}],"abstract":[{"lang":"eng","text":"Despite increasing ethnic diversity in Germany, racist structures are still deeply rooted in society,\r\nas is demonstrated by various initiatives and studies. Racism is also evident in the depiction of\r\nJesus Christ, who traditionally is portrayed as 'white' in Christian art, although he must be read\r\nbiblically as a Person of Color (PoC). Examples such as the “Wales Window for Alabama” (1964)\r\nby Ronald John Petts and the contemporary icon by Kelly Latimore “Christ in The Rubble” (2023)\r\nshow Jesus as PoC and address racism and social justice. Children’s Bibles continue to be\r\ndominated by ‘white’ depictions of Jesus and the people around him. Works such as the chil-\r\ndren’s Bibles by Desmond Tutu (lyrics) / Laure Fournier et al. (illustration) (2010), Sören Dalevi\r\n(lyrics) / Marcus-Gunnar Petterson (illustration) (2022), Willemijn de Weerd (lyrics) / Marieke ten\r\nBerge (illustration) (2022) and Andrea Karimé (lyrics) / Anna Lisicki-Hehn (illustration) (2023) of-\r\nfer more diverse and racism-sensitive depictions that contribute to the promotion of diversity\r\ncompetence and positive identity formation. The article argues for a more extensive representa-\r\ntion of diversity in depictions of Jesus Christ in Christian art and children’s Bibles in order to\r\navoid discriminatory stereotypes and to encourage PoC, children and adults.\r\n"}],"related_material":{"link":[{"url":"https://www.die-bibel.de/bibel-in-der-kunst/bibel-in-der-kunst-2024","relation":"confirmation"}]},"publication":"Die Bibel in der Kunst/ Bible in the Arts","series_title":"Bibel in der Kunst/ Bibel in the Arts (BiKu)","language":[{"iso":"ger"}],"main_file_link":[{"open_access":"1","url":"https://www.die-bibel.de/bibel-in-der-kunst/bibel-in-der-kunst-2024"}],"intvolume":" 8","publication_status":"published","date_updated":"2026-03-27T08:08:13Z","corporate_editor":["Deutsche Bibelgesellschaft"],"author":[{"id":"251","full_name":"Keuchen, Marion","last_name":"Keuchen","first_name":"Marion","orcid":"https://orcid.org/0009-0000-9904-6479"},{"last_name":"Lerke","first_name":"Stephanie","full_name":"Lerke, Stephanie"}],"title":"Vielfalt begrüßen. Ein rassismuskritischer Blick auf Jesus-Darstellungen in christlicher Kunst und Kinderbibeln","year":"2024","oa":"1","quality_controlled":"1","citation":{"chicago":"Keuchen, Marion, and Stephanie Lerke. “Vielfalt begrüßen. Ein rassismuskritischer Blick auf Jesus-Darstellungen in christlicher Kunst und Kinderbibeln.” In Die Bibel in der Kunst/ Bible in the Arts, edited by Deutsche Bibelgesellschaft, 8:1–21. Bibel in der Kunst/ Bibel in the Arts (BiKu), 2024.","short":"M. Keuchen, S. Lerke, in: Deutsche Bibelgesellschaft (Ed.), Die Bibel in der Kunst/ Bible in the Arts, 2024, pp. 1–21.","ieee":"M. Keuchen and S. Lerke, “Vielfalt begrüßen. Ein rassismuskritischer Blick auf Jesus-Darstellungen in christlicher Kunst und Kinderbibeln,” in Die Bibel in der Kunst/ Bible in the Arts, vol. 8, Deutsche Bibelgesellschaft, Ed. 2024, pp. 1–21.","apa":"Keuchen, M., & Lerke, S. (2024). Vielfalt begrüßen. Ein rassismuskritischer Blick auf Jesus-Darstellungen in christlicher Kunst und Kinderbibeln. In Deutsche Bibelgesellschaft (Ed.), Die Bibel in der Kunst/ Bible in the Arts (Vol. 8, pp. 1–21).","bibtex":"@inbook{Keuchen_Lerke_2024, series={Bibel in der Kunst/ Bibel in the Arts (BiKu)}, title={Vielfalt begrüßen. Ein rassismuskritischer Blick auf Jesus-Darstellungen in christlicher Kunst und Kinderbibeln}, volume={8}, booktitle={Die Bibel in der Kunst/ Bible in the Arts}, author={Keuchen, Marion and Lerke, Stephanie}, editor={Deutsche Bibelgesellschaft}, year={2024}, pages={1–21}, collection={Bibel in der Kunst/ Bibel in the Arts (BiKu)} }","ama":"Keuchen M, Lerke S. Vielfalt begrüßen. Ein rassismuskritischer Blick auf Jesus-Darstellungen in christlicher Kunst und Kinderbibeln. In: Deutsche Bibelgesellschaft, ed. Die Bibel in der Kunst/ Bible in the Arts. Vol 8. Bibel in der Kunst/ Bibel in the Arts (BiKu). ; 2024:1-21.","mla":"Keuchen, Marion, and Stephanie Lerke. “Vielfalt begrüßen. Ein rassismuskritischer Blick auf Jesus-Darstellungen in christlicher Kunst und Kinderbibeln.” Die Bibel in der Kunst/ Bible in the Arts, edited by Deutsche Bibelgesellschaft, vol. 8, 2024, pp. 1–21."},"file_date_updated":"2026-03-27T07:47:21Z","volume":8,"user_id":"251","ddc":["200"],"_id":"65161","page":"1-21","has_accepted_license":"1","status":"public"},{"volume":2,"ddc":["200"],"user_id":"251","_id":"65163","page":"224-237","has_accepted_license":"1","status":"public","oa":"1","quality_controlled":"1","citation":{"apa":"Keuchen, M. (2024). Aktuelle pädagogische und hermeneutische Ansätze aus Judentum, Christentum und Islam in Kindertora, Kinderbibel und Kinderkoran: Identitätsbildung, diversitätssensible Religionspädagogik und normative Diskurse. TheoWeb. Zeitschrift für Religionspädagogik, 2, 224–237. https://doi.org/10.23770/tw0360","ieee":"M. Keuchen, “Aktuelle pädagogische und hermeneutische Ansätze aus Judentum, Christentum und Islam in Kindertora, Kinderbibel und Kinderkoran: Identitätsbildung, diversitätssensible Religionspädagogik und normative Diskurse,” TheoWeb. Zeitschrift für Religionspädagogik, vol. 2, pp. 224–237, 2024, doi: 10.23770/tw0360.","short":"M. Keuchen, TheoWeb. Zeitschrift für Religionspädagogik 2 (2024) 224–237.","chicago":"Keuchen, Marion. “Aktuelle pädagogische und hermeneutische Ansätze aus Judentum, Christentum und Islam in Kindertora, Kinderbibel und Kinderkoran: Identitätsbildung, diversitätssensible Religionspädagogik und normative Diskurse.” TheoWeb. Zeitschrift für Religionspädagogik 2 (2024): 224–37. https://doi.org/10.23770/tw0360.","mla":"Keuchen, Marion. “Aktuelle pädagogische und hermeneutische Ansätze aus Judentum, Christentum und Islam in Kindertora, Kinderbibel und Kinderkoran: Identitätsbildung, diversitätssensible Religionspädagogik und normative Diskurse.” TheoWeb. Zeitschrift für Religionspädagogik, vol. 2, 2024, pp. 224–37, doi:10.23770/tw0360.","ama":"Keuchen M. Aktuelle pädagogische und hermeneutische Ansätze aus Judentum, Christentum und Islam in Kindertora, Kinderbibel und Kinderkoran: Identitätsbildung, diversitätssensible Religionspädagogik und normative Diskurse. TheoWeb Zeitschrift für Religionspädagogik. 2024;2:224-237. doi:10.23770/tw0360","bibtex":"@article{Keuchen_2024, title={Aktuelle pädagogische und hermeneutische Ansätze aus Judentum, Christentum und Islam in Kindertora, Kinderbibel und Kinderkoran: Identitätsbildung, diversitätssensible Religionspädagogik und normative Diskurse}, volume={2}, DOI={10.23770/tw0360}, journal={TheoWeb. Zeitschrift für Religionspädagogik}, author={Keuchen, Marion}, year={2024}, pages={224–237} }"},"file_date_updated":"2026-03-27T08:04:06Z","doi":"10.23770/tw0360","language":[{"iso":"ger"}],"main_file_link":[{"url":"https://www.theo-web.de/fileadmin/user_upload/theo-web/pdfs/23-jahrgang-2024-heft-2/aktuelle-paedagogische-und-hermeneutische-ansaetze-aus-judentum-christentum-und-islam-in-kindertora-kinderbibel-und-kinderkoran-identitaetsbildung-diversitaetssensible-religionspaedagogik-und-normative-diskurse.pdf","open_access":"1"}],"intvolume":" 2","article_type":"original","date_updated":"2026-03-27T18:41:17Z","publication_status":"published","author":[{"id":"251","first_name":"Marion","last_name":"Keuchen","orcid":"https://orcid.org/0009-0000-9904-6479","full_name":"Keuchen, Marion"}],"title":"Aktuelle pädagogische und hermeneutische Ansätze aus Judentum, Christentum und Islam in Kindertora, Kinderbibel und Kinderkoran: Identitätsbildung, diversitätssensible Religionspädagogik und normative Diskurse","year":"2024","department":[{"_id":"20"},{"_id":"500"}],"type":"journal_article","keyword":["Heilige Schriften","interreligiöses Lernen","Schrifthermeneutik","Identität","diversitätssensible Religionspädagogik","jüdische Religionspädagogik","muslimische Religionspädagogik","christliche Religionspädagogik","Holy scriptures","interreligious learning","hermeneutics of scripture","identity","diversity-sensitive religious education","Jewish religious education","Muslim religious education","Christian religious education"],"date_created":"2026-03-27T08:06:54Z","file":[{"creator":"keuchen","date_created":"2026-03-27T08:04:06Z","file_size":223437,"access_level":"closed","file_name":"aktuelle-paedagogische-und-hermeneutische-ansaetze-aus-judentum-christentum-und-islam-in-kindertora-kinderbibel-und-kinderkoran-identitaetsbildung-diversitaetssensible-religionspaedagogik-und-normative-diskurse.pdf","date_updated":"2026-03-27T08:04:06Z","relation":"main_file","content_type":"application/pdf","success":1,"file_id":"65164"}],"related_material":{"link":[{"relation":"confirmation","url":"https://www.theo-web.de/fileadmin/user_upload/theo-web/pdfs/23-jahrgang-2024-heft-2/aktuelle-paedagogische-und-hermeneutische-ansaetze-aus-judentum-christentum-und-islam-in-kindertora-kinderbibel-und-kinderkoran-identitaetsbildung-diversitaetssensible-religionspaedagogik-und-normative-diskurse.pdf"}]},"abstract":[{"text":"Dieser Beitrag untersucht aktuelle pädagogische und hermeneutische Ansätze der\r\njüdischen, christlichen und muslimischen Religionspädagogik in Kindertora, Kinderbibel\r\nund Kinderkoran. Er betont die Notwendigkeit für Lehrkräfte, sich mit den spezifischen\r\npädagogischen und hermeneutischen Ansätzen der drei monotheistischen Religionen\r\nvertraut zu machen, um die didaktischen Heiligen Schriften im Unterricht angemessen\r\nnutzen zu können. Beispiele aus dem aktuellen Religionsunterricht zeigen\r\nMissverständnisse und Überraschungen auf, die durch unzureichendes Wissen entstehen.\r\nDer Artikel hebt die Bedeutung einer jüdischen Identitätsbildung, einer christlichen\r\ndiversitätssensiblen Perspektive und von muslimischen normativen Diskursen in den\r\nverschiedenen Religionspädagogiken hervor und diskutiert die Herausforderungen und\r\nChancen, die mit der Nutzung didaktisierter Heiliger Schriften verbunden sind.\r\n","lang":"ger"},{"text":"This article examines current pedagogical and hermeneutical approaches to Jewish,\r\nChristian and Muslim religious education in the Children’s Torah, Children’s Bible and\r\nChildren’s Quran. It emphasizes the need for teachers to familiarize themselves with the\r\nspecific pedagogical and hermeneutical approaches of the three monotheistic religions in\r\norder to be able to use the didactic Holy Scriptures appropriately in the classroom.\r\nExamples from current religious education lessons show misunderstandings and\r\nsurprises that arise due to insufficient knowledge. The article emphasizes the importance\r\nof Jewish identity formation, a Christian diversity-sensitive perspective and Muslim\r\nnormative discourses in the various religious pedagogies and discusses the challenges\r\nand opportunities associated with the use of didactic Holy Scriptures.\r\n","lang":"eng"}],"publication":"TheoWeb. Zeitschrift für Religionspädagogik"},{"author":[{"full_name":"Safranoglou, Ioannis","last_name":"Safranoglou","first_name":"Ioannis"},{"full_name":"Stavroulakis, Alexis","last_name":"Stavroulakis","first_name":"Alexis"},{"id":"405","first_name":"Jens","orcid":"http://orcid.org/0000-0001-8778-2989","last_name":"Pottebaum","full_name":"Pottebaum, Jens"},{"id":"81788","full_name":"Ebel, Marcel","first_name":"Marcel","last_name":"Ebel","orcid":"https://orcid.org/0009-0007-5400-4436"},{"first_name":"Georgios","last_name":"Lamprinakis","full_name":"Lamprinakis, Georgios"},{"full_name":"Dimelli, Despina","first_name":"Despina","last_name":"Dimelli"},{"full_name":"Mania, Katerina","first_name":"Katerina","last_name":"Mania"}],"conference":{"name":"2024 IEEE International Symposium on Mixed and Augmented Reality"},"title":"Augmented Reality for Real-Time Decision-Making in Flood Emergencies","year":"2024","status":"public","date_updated":"2026-03-31T02:42:32Z","publisher":"IEEE","_id":"57309","language":[{"iso":"eng"}],"main_file_link":[{"open_access":"1","url":"https://ieeexplore.ieee.org/abstract/document/10765130"}],"user_id":"405","doi":"https://doi.org/10.1109/ISMAR-Adjunct64951.2024.00032","citation":{"chicago":"Safranoglou, Ioannis, Alexis Stavroulakis, Jens Pottebaum, Marcel Ebel, Georgios Lamprinakis, Despina Dimelli, and Katerina Mania. “Augmented Reality for Real-Time Decision-Making in Flood Emergencies.” In 2024 IEEE International Symposium on Mixed and Augmented Reality Adjunct (ISMAR-Adjunct). IEEE, 2024. https://doi.org/10.1109/ISMAR-Adjunct64951.2024.00032.","short":"I. Safranoglou, A. Stavroulakis, J. Pottebaum, M. Ebel, G. Lamprinakis, D. Dimelli, K. Mania, in: 2024 IEEE International Symposium on Mixed and Augmented Reality Adjunct (ISMAR-Adjunct), IEEE, 2024.","apa":"Safranoglou, I., Stavroulakis, A., Pottebaum, J., Ebel, M., Lamprinakis, G., Dimelli, D., & Mania, K. (2024). Augmented Reality for Real-Time Decision-Making in Flood Emergencies. 2024 IEEE International Symposium on Mixed and Augmented Reality Adjunct (ISMAR-Adjunct). 2024 IEEE International Symposium on Mixed and Augmented Reality. https://doi.org/10.1109/ISMAR-Adjunct64951.2024.00032","ieee":"I. Safranoglou et al., “Augmented Reality for Real-Time Decision-Making in Flood Emergencies,” presented at the 2024 IEEE International Symposium on Mixed and Augmented Reality, 2024, doi: https://doi.org/10.1109/ISMAR-Adjunct64951.2024.00032.","ama":"Safranoglou I, Stavroulakis A, Pottebaum J, et al. Augmented Reality for Real-Time Decision-Making in Flood Emergencies. In: 2024 IEEE International Symposium on Mixed and Augmented Reality Adjunct (ISMAR-Adjunct). IEEE; 2024. doi:https://doi.org/10.1109/ISMAR-Adjunct64951.2024.00032","bibtex":"@inproceedings{Safranoglou_Stavroulakis_Pottebaum_Ebel_Lamprinakis_Dimelli_Mania_2024, title={Augmented Reality for Real-Time Decision-Making in Flood Emergencies}, DOI={https://doi.org/10.1109/ISMAR-Adjunct64951.2024.00032}, booktitle={2024 IEEE International Symposium on Mixed and Augmented Reality Adjunct (ISMAR-Adjunct)}, publisher={IEEE}, author={Safranoglou, Ioannis and Stavroulakis, Alexis and Pottebaum, Jens and Ebel, Marcel and Lamprinakis, Georgios and Dimelli, Despina and Mania, Katerina}, year={2024} }","mla":"Safranoglou, Ioannis, et al. “Augmented Reality for Real-Time Decision-Making in Flood Emergencies.” 2024 IEEE International Symposium on Mixed and Augmented Reality Adjunct (ISMAR-Adjunct), IEEE, 2024, doi:https://doi.org/10.1109/ISMAR-Adjunct64951.2024.00032."},"publication":"2024 IEEE International Symposium on Mixed and Augmented Reality Adjunct (ISMAR-Adjunct)","project":[{"name":"CREXDATA: CREXDATA: Kritische Maßnahmenplanung über extreme Datenmengen","_id":"516"}],"quality_controlled":"1","date_created":"2024-11-21T10:25:35Z","department":[{"_id":"152"}],"oa":"1","type":"conference"}]