---
_id: '41500'
abstract:
- lang: eng
text: Titanium alloys, especially β alloys, are favorable as implant materials
due to their promising combination of low Young’s modulus, high strength, corrosion
resistance, and biocompatibility. In particular, the low Young’s moduli reduce
the risk of stress shielding and implant loosening. The processing of Ti-24Nb-4Zr-8Sn
through laser powder bed fusion is presented. The specimens were heat-treated,
and the microstructure was investigated using X-ray diffraction, scanning electron
microscopy, and transmission electron microscopy. The mechanical properties were
determined by hardness and tensile tests. The microstructures reveal a mainly
β microstructure with α″ formation for high cooling rates and α precipitates after
moderate cooling rates or aging. The as-built and α″ phase containing conditions
exhibit a hardness around 225 HV5, yield strengths (YS) from 340 to 490 MPa, ultimate
tensile strengths (UTS) around 706 MPa, fracture elongations around 20%, and Young’s
moduli about 50 GPa. The α precipitates containing conditions reveal a hardness
around 297 HV5, YS around 812 MPa, UTS from 871 to 931 MPa, fracture elongations
around 12%, and Young’s moduli about 75 GPa. Ti-24Nb-4Zr-8Sn exhibits, depending
on the heat treatment, promising properties regarding the material behavior and
the opportunity to tailor the mechanical performance as a low modulus, high strength
implant material.
article_number: '3774'
author:
- first_name: Maxwell
full_name: Hein, Maxwell
id: '52771'
last_name: Hein
orcid: 0000-0002-3732-2236
- first_name: Nelson Filipe
full_name: Lopes Dias, Nelson Filipe
last_name: Lopes Dias
- first_name: Sudipta
full_name: Pramanik, Sudipta
last_name: Pramanik
- first_name: Dominic
full_name: Stangier, Dominic
last_name: Stangier
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Wolfgang
full_name: Tillmann, Wolfgang
last_name: Tillmann
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: Hein M, Lopes Dias NF, Pramanik S, et al. Heat Treatments of Metastable β Titanium
Alloy Ti-24Nb-4Zr-8Sn Processed by Laser Powder Bed Fusion. Materials.
2022;15(11). doi:10.3390/ma15113774
apa: Hein, M., Lopes Dias, N. F., Pramanik, S., Stangier, D., Hoyer, K.-P., Tillmann,
W., & Schaper, M. (2022). Heat Treatments of Metastable β Titanium Alloy Ti-24Nb-4Zr-8Sn
Processed by Laser Powder Bed Fusion. Materials, 15(11), Article
3774. https://doi.org/10.3390/ma15113774
bibtex: '@article{Hein_Lopes Dias_Pramanik_Stangier_Hoyer_Tillmann_Schaper_2022,
title={Heat Treatments of Metastable β Titanium Alloy Ti-24Nb-4Zr-8Sn Processed
by Laser Powder Bed Fusion}, volume={15}, DOI={10.3390/ma15113774},
number={113774}, journal={Materials}, publisher={MDPI AG}, author={Hein, Maxwell
and Lopes Dias, Nelson Filipe and Pramanik, Sudipta and Stangier, Dominic and
Hoyer, Kay-Peter and Tillmann, Wolfgang and Schaper, Mirko}, year={2022} }'
chicago: Hein, Maxwell, Nelson Filipe Lopes Dias, Sudipta Pramanik, Dominic Stangier,
Kay-Peter Hoyer, Wolfgang Tillmann, and Mirko Schaper. “Heat Treatments of Metastable
β Titanium Alloy Ti-24Nb-4Zr-8Sn Processed by Laser Powder Bed Fusion.” Materials
15, no. 11 (2022). https://doi.org/10.3390/ma15113774.
ieee: 'M. Hein et al., “Heat Treatments of Metastable β Titanium Alloy Ti-24Nb-4Zr-8Sn
Processed by Laser Powder Bed Fusion,” Materials, vol. 15, no. 11, Art.
no. 3774, 2022, doi: 10.3390/ma15113774.'
mla: Hein, Maxwell, et al. “Heat Treatments of Metastable β Titanium Alloy Ti-24Nb-4Zr-8Sn
Processed by Laser Powder Bed Fusion.” Materials, vol. 15, no. 11, 3774,
MDPI AG, 2022, doi:10.3390/ma15113774.
short: M. Hein, N.F. Lopes Dias, S. Pramanik, D. Stangier, K.-P. Hoyer, W. Tillmann,
M. Schaper, Materials 15 (2022).
date_created: 2023-02-02T14:28:54Z
date_updated: 2023-04-27T16:46:15Z
department:
- _id: '9'
- _id: '158'
doi: 10.3390/ma15113774
intvolume: ' 15'
issue: '11'
keyword:
- General Materials Science
language:
- iso: eng
publication: Materials
publication_identifier:
issn:
- 1996-1944
publication_status: published
publisher: MDPI AG
quality_controlled: '1'
status: public
title: Heat Treatments of Metastable β Titanium Alloy Ti-24Nb-4Zr-8Sn Processed by
Laser Powder Bed Fusion
type: journal_article
user_id: '43720'
volume: 15
year: '2022'
...
---
_id: '41503'
abstract:
- lang: eng
text: The quasi in-situ indentation behaviour of <110>||BD and <111>||BD-oriented
grains in a FeCo alloy is studied in this investigation. The effect of build height
on melt pool shape and melt pool size is also studied by finite element method
simulations. As the building height increases, the aspect ratio of the elliptical
melt pool increases. Correspondingly, the effect of the laser scan speed on the
melt pool shape and size is studied by the finite element method, because, as
the laser scan speed increases, the aspect ratio of the elliptical melt pool increases,
too. The microstructural characterisation of the indentation area before and after
indentation is performed by electron backscatter diffraction (EBSD). Based on
the EBSD data grain reference orientation deviation (GROD), calculations are performed
to describe the effect of indentations on the neighbouring grain orientations.
High GROD angles are detected in the neighbouring grain region adjoining the indented
grain. An in-depth slip trace analysis shows the activation of all three slip
systems ({110}<111>, {112}<111> and {123}<111>) which is also
confirmed by slip lines on the sample surface that are detected by laser scanning
confocal microscopy. A high concentration of geometrically necessary dislocations
(GNDs) are observed on the adjoining area to the indentation. Local surface topography
measurements by laser scanning confocal microscopy confirmed the formation of
pile-ups near the indentation.
author:
- first_name: Sudipta
full_name: Pramanik, Sudipta
last_name: Pramanik
- first_name: Frederik
full_name: Tasche, Frederik
last_name: Tasche
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: 'Pramanik S, Tasche F, Hoyer K-P, Schaper M. Orientation-Dependent Indentation
Behaviour of Additively Manufactured FeCo Sample: A Quasi In-Situ Study. Magnetism.
2022;2(2):88-104. doi:10.3390/magnetism2020007'
apa: 'Pramanik, S., Tasche, F., Hoyer, K.-P., & Schaper, M. (2022). Orientation-Dependent
Indentation Behaviour of Additively Manufactured FeCo Sample: A Quasi In-Situ
Study. Magnetism, 2(2), 88–104. https://doi.org/10.3390/magnetism2020007'
bibtex: '@article{Pramanik_Tasche_Hoyer_Schaper_2022, title={Orientation-Dependent
Indentation Behaviour of Additively Manufactured FeCo Sample: A Quasi In-Situ
Study}, volume={2}, DOI={10.3390/magnetism2020007},
number={2}, journal={Magnetism}, publisher={MDPI AG}, author={Pramanik, Sudipta
and Tasche, Frederik and Hoyer, Kay-Peter and Schaper, Mirko}, year={2022}, pages={88–104}
}'
chicago: 'Pramanik, Sudipta, Frederik Tasche, Kay-Peter Hoyer, and Mirko Schaper.
“Orientation-Dependent Indentation Behaviour of Additively Manufactured FeCo Sample:
A Quasi In-Situ Study.” Magnetism 2, no. 2 (2022): 88–104. https://doi.org/10.3390/magnetism2020007.'
ieee: 'S. Pramanik, F. Tasche, K.-P. Hoyer, and M. Schaper, “Orientation-Dependent
Indentation Behaviour of Additively Manufactured FeCo Sample: A Quasi In-Situ
Study,” Magnetism, vol. 2, no. 2, pp. 88–104, 2022, doi: 10.3390/magnetism2020007.'
mla: 'Pramanik, Sudipta, et al. “Orientation-Dependent Indentation Behaviour of
Additively Manufactured FeCo Sample: A Quasi In-Situ Study.” Magnetism,
vol. 2, no. 2, MDPI AG, 2022, pp. 88–104, doi:10.3390/magnetism2020007.'
short: S. Pramanik, F. Tasche, K.-P. Hoyer, M. Schaper, Magnetism 2 (2022) 88–104.
date_created: 2023-02-02T14:29:57Z
date_updated: 2023-04-27T16:46:28Z
department:
- _id: '9'
- _id: '158'
doi: 10.3390/magnetism2020007
intvolume: ' 2'
issue: '2'
keyword:
- General Earth and Planetary Sciences
- General Environmental Science
language:
- iso: eng
page: 88-104
publication: Magnetism
publication_identifier:
issn:
- 2673-8724
publication_status: published
publisher: MDPI AG
quality_controlled: '1'
status: public
title: 'Orientation-Dependent Indentation Behaviour of Additively Manufactured FeCo
Sample: A Quasi In-Situ Study'
type: journal_article
user_id: '43720'
volume: 2
year: '2022'
...
---
_id: '41501'
article_number: '132384'
author:
- first_name: Wolfgang
full_name: Tillmann, Wolfgang
last_name: Tillmann
- first_name: Nelson Filipe
full_name: Lopes Dias, Nelson Filipe
last_name: Lopes Dias
- first_name: David
full_name: Kokalj, David
last_name: Kokalj
- first_name: Dominic
full_name: Stangier, Dominic
last_name: Stangier
- first_name: Maxwell
full_name: Hein, Maxwell
id: '52771'
last_name: Hein
orcid: 0000-0002-3732-2236
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
- first_name: Daria
full_name: Gödecke, Daria
last_name: Gödecke
- first_name: Hilke
full_name: Oltmanns, Hilke
last_name: Oltmanns
- first_name: Jessica
full_name: Meißner, Jessica
last_name: Meißner
citation:
ama: Tillmann W, Lopes Dias NF, Kokalj D, et al. Tribo-functional PVD thin films
deposited onto additively manufactured Ti6Al7Nb for biomedical applications. Materials
Letters. 2022;321. doi:10.1016/j.matlet.2022.132384
apa: Tillmann, W., Lopes Dias, N. F., Kokalj, D., Stangier, D., Hein, M., Hoyer,
K.-P., Schaper, M., Gödecke, D., Oltmanns, H., & Meißner, J. (2022). Tribo-functional
PVD thin films deposited onto additively manufactured Ti6Al7Nb for biomedical
applications. Materials Letters, 321, Article 132384. https://doi.org/10.1016/j.matlet.2022.132384
bibtex: '@article{Tillmann_Lopes Dias_Kokalj_Stangier_Hein_Hoyer_Schaper_Gödecke_Oltmanns_Meißner_2022,
title={Tribo-functional PVD thin films deposited onto additively manufactured
Ti6Al7Nb for biomedical applications}, volume={321}, DOI={10.1016/j.matlet.2022.132384},
number={132384}, journal={Materials Letters}, publisher={Elsevier BV}, author={Tillmann,
Wolfgang and Lopes Dias, Nelson Filipe and Kokalj, David and Stangier, Dominic
and Hein, Maxwell and Hoyer, Kay-Peter and Schaper, Mirko and Gödecke, Daria and
Oltmanns, Hilke and Meißner, Jessica}, year={2022} }'
chicago: Tillmann, Wolfgang, Nelson Filipe Lopes Dias, David Kokalj, Dominic Stangier,
Maxwell Hein, Kay-Peter Hoyer, Mirko Schaper, Daria Gödecke, Hilke Oltmanns, and
Jessica Meißner. “Tribo-Functional PVD Thin Films Deposited onto Additively Manufactured
Ti6Al7Nb for Biomedical Applications.” Materials Letters 321 (2022). https://doi.org/10.1016/j.matlet.2022.132384.
ieee: 'W. Tillmann et al., “Tribo-functional PVD thin films deposited onto
additively manufactured Ti6Al7Nb for biomedical applications,” Materials Letters,
vol. 321, Art. no. 132384, 2022, doi: 10.1016/j.matlet.2022.132384.'
mla: Tillmann, Wolfgang, et al. “Tribo-Functional PVD Thin Films Deposited onto
Additively Manufactured Ti6Al7Nb for Biomedical Applications.” Materials Letters,
vol. 321, 132384, Elsevier BV, 2022, doi:10.1016/j.matlet.2022.132384.
short: W. Tillmann, N.F. Lopes Dias, D. Kokalj, D. Stangier, M. Hein, K.-P. Hoyer,
M. Schaper, D. Gödecke, H. Oltmanns, J. Meißner, Materials Letters 321 (2022).
date_created: 2023-02-02T14:29:15Z
date_updated: 2023-04-27T16:46:18Z
department:
- _id: '9'
- _id: '158'
doi: 10.1016/j.matlet.2022.132384
intvolume: ' 321'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- Condensed Matter Physics
- General Materials Science
language:
- iso: eng
publication: Materials Letters
publication_identifier:
issn:
- 0167-577X
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Tribo-functional PVD thin films deposited onto additively manufactured Ti6Al7Nb
for biomedical applications
type: journal_article
user_id: '43720'
volume: 321
year: '2022'
...
---
_id: '30103'
author:
- first_name: Jingyuan
full_name: Huang, Jingyuan
last_name: Huang
- first_name: Alejandro Gonzalez
full_name: Orive, Alejandro Gonzalez
last_name: Orive
- first_name: Jan Tobias
full_name: Krüger, Jan Tobias
id: '44307'
last_name: Krüger
orcid: 0000-0002-0827-9654
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Adrian
full_name: Keller, Adrian
id: '48864'
last_name: Keller
orcid: 0000-0001-7139-3110
- first_name: Guido
full_name: Grundmeier, Guido
id: '194'
last_name: Grundmeier
citation:
ama: Huang J, Orive AG, Krüger JT, Hoyer K-P, Keller A, Grundmeier G. Influence
of proteins on the corrosion of a conventional and selective laser beam melted
FeMn alloy in physiological electrolytes. Corrosion Science. 2022;200:110186.
doi:10.1016/j.corsci.2022.110186
apa: Huang, J., Orive, A. G., Krüger, J. T., Hoyer, K.-P., Keller, A., & Grundmeier,
G. (2022). Influence of proteins on the corrosion of a conventional and selective
laser beam melted FeMn alloy in physiological electrolytes. Corrosion Science,
200, 110186. https://doi.org/10.1016/j.corsci.2022.110186
bibtex: '@article{Huang_Orive_Krüger_Hoyer_Keller_Grundmeier_2022, title={Influence
of proteins on the corrosion of a conventional and selective laser beam melted
FeMn alloy in physiological electrolytes}, volume={200}, DOI={10.1016/j.corsci.2022.110186},
journal={Corrosion Science}, publisher={Elsevier BV}, author={Huang, Jingyuan
and Orive, Alejandro Gonzalez and Krüger, Jan Tobias and Hoyer, Kay-Peter and
Keller, Adrian and Grundmeier, Guido}, year={2022}, pages={110186} }'
chicago: 'Huang, Jingyuan, Alejandro Gonzalez Orive, Jan Tobias Krüger, Kay-Peter
Hoyer, Adrian Keller, and Guido Grundmeier. “Influence of Proteins on the Corrosion
of a Conventional and Selective Laser Beam Melted FeMn Alloy in Physiological
Electrolytes.” Corrosion Science 200 (2022): 110186. https://doi.org/10.1016/j.corsci.2022.110186.'
ieee: 'J. Huang, A. G. Orive, J. T. Krüger, K.-P. Hoyer, A. Keller, and G. Grundmeier,
“Influence of proteins on the corrosion of a conventional and selective laser
beam melted FeMn alloy in physiological electrolytes,” Corrosion Science,
vol. 200, p. 110186, 2022, doi: 10.1016/j.corsci.2022.110186.'
mla: Huang, Jingyuan, et al. “Influence of Proteins on the Corrosion of a Conventional
and Selective Laser Beam Melted FeMn Alloy in Physiological Electrolytes.” Corrosion
Science, vol. 200, Elsevier BV, 2022, p. 110186, doi:10.1016/j.corsci.2022.110186.
short: J. Huang, A.G. Orive, J.T. Krüger, K.-P. Hoyer, A. Keller, G. Grundmeier,
Corrosion Science 200 (2022) 110186.
date_created: 2022-02-25T09:32:43Z
date_updated: 2023-04-27T16:47:42Z
department:
- _id: '302'
- _id: '158'
doi: 10.1016/j.corsci.2022.110186
intvolume: ' 200'
keyword:
- General Materials Science
- General Chemical Engineering
- General Chemistry
language:
- iso: eng
page: '110186'
publication: Corrosion Science
publication_identifier:
issn:
- 0010-938X
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Influence of proteins on the corrosion of a conventional and selective laser
beam melted FeMn alloy in physiological electrolytes
type: journal_article
user_id: '48411'
volume: 200
year: '2022'
...
---
_id: '41502'
article_number: '2200022'
author:
- first_name: Zhenjie
full_name: Teng, Zhenjie
last_name: Teng
- first_name: Haoran
full_name: Wu, Haoran
last_name: Wu
- first_name: Sudipta
full_name: Pramanik, Sudipta
last_name: Pramanik
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
- first_name: Hanlong
full_name: Zhang, Hanlong
last_name: Zhang
- first_name: Christian
full_name: Boller, Christian
last_name: Boller
- first_name: Peter
full_name: Starke, Peter
last_name: Starke
citation:
ama: Teng Z, Wu H, Pramanik S, et al. Characterization and Analysis of Plastic Instability
in an Ultrafine‐Grained Medium Mn TRIP Steel. Advanced Engineering Materials.
2022;24(9). doi:10.1002/adem.202200022
apa: Teng, Z., Wu, H., Pramanik, S., Hoyer, K.-P., Schaper, M., Zhang, H., Boller,
C., & Starke, P. (2022). Characterization and Analysis of Plastic Instability
in an Ultrafine‐Grained Medium Mn TRIP Steel. Advanced Engineering Materials,
24(9), Article 2200022. https://doi.org/10.1002/adem.202200022
bibtex: '@article{Teng_Wu_Pramanik_Hoyer_Schaper_Zhang_Boller_Starke_2022, title={Characterization
and Analysis of Plastic Instability in an Ultrafine‐Grained Medium Mn TRIP Steel},
volume={24}, DOI={10.1002/adem.202200022},
number={92200022}, journal={Advanced Engineering Materials}, publisher={Wiley},
author={Teng, Zhenjie and Wu, Haoran and Pramanik, Sudipta and Hoyer, Kay-Peter
and Schaper, Mirko and Zhang, Hanlong and Boller, Christian and Starke, Peter},
year={2022} }'
chicago: Teng, Zhenjie, Haoran Wu, Sudipta Pramanik, Kay-Peter Hoyer, Mirko Schaper,
Hanlong Zhang, Christian Boller, and Peter Starke. “Characterization and Analysis
of Plastic Instability in an Ultrafine‐Grained Medium Mn TRIP Steel.” Advanced
Engineering Materials 24, no. 9 (2022). https://doi.org/10.1002/adem.202200022.
ieee: 'Z. Teng et al., “Characterization and Analysis of Plastic Instability
in an Ultrafine‐Grained Medium Mn TRIP Steel,” Advanced Engineering Materials,
vol. 24, no. 9, Art. no. 2200022, 2022, doi: 10.1002/adem.202200022.'
mla: Teng, Zhenjie, et al. “Characterization and Analysis of Plastic Instability
in an Ultrafine‐Grained Medium Mn TRIP Steel.” Advanced Engineering Materials,
vol. 24, no. 9, 2200022, Wiley, 2022, doi:10.1002/adem.202200022.
short: Z. Teng, H. Wu, S. Pramanik, K.-P. Hoyer, M. Schaper, H. Zhang, C. Boller,
P. Starke, Advanced Engineering Materials 24 (2022).
date_created: 2023-02-02T14:29:36Z
date_updated: 2023-04-27T16:46:25Z
department:
- _id: '9'
- _id: '158'
doi: 10.1002/adem.202200022
intvolume: ' 24'
issue: '9'
keyword:
- Condensed Matter Physics
- General Materials Science
language:
- iso: eng
publication: Advanced Engineering Materials
publication_identifier:
issn:
- 1438-1656
- 1527-2648
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: Characterization and Analysis of Plastic Instability in an Ultrafine‐Grained
Medium Mn TRIP Steel
type: journal_article
user_id: '43720'
volume: 24
year: '2022'
...
---
_id: '44238'
abstract:
- lang: eng
text: In numerous turbomachinery applications, e.g., in aero-engines with
regenerators for improving specific fuel consumption (SFC), heat exchangers with
low-pressure loss are required. Pil low-plate heat exchangers (PPHE) are a novel
exchanger type and promising candidates for high-speed flow applications due to
their smooth profiles avoiding blunt obstacles in the flow path. This work deals
with the overall system behavior and gas dynamics of pillow-plate channels. A
pillow-plate channel was placed in the test section of a blow-down wind tunnel
working with dry air, and compressible flow phenomena were investigated utilizing
conventional and focusing schlieren optics; furthermore, static and total pressure
measurements were performed. The experiments supported the assumption that the
system behavior can be described through a Fanno–Rayleigh flow model. Since only
wavy walls with smooth profiles were involved, linearized gas dynamics was able
to cover important flow features within the channel. The effects of the wavy wall
structures on pressure drop and Mach number distribution within the flow path
were investigated, and a good qualitative agreement with theoretical and numerical
predictions was found. The present analysis demonstrates that pressure losses
in pillow-plate heat exchangers are rather low, although their strong turbulent
mixing enables high convective heat transfer coefficients.
article_number: '12'
author:
- first_name: Stephan
full_name: Sundermeier, Stephan
last_name: Sundermeier
- first_name: Maximilian
full_name: Passmann, Maximilian
last_name: Passmann
- first_name: Stefan
full_name: aus der Wiesche, Stefan
last_name: aus der Wiesche
- first_name: Eugeny Y.
full_name: Kenig, Eugeny Y.
id: '665'
last_name: Kenig
citation:
ama: Sundermeier S, Passmann M, aus der Wiesche S, Kenig EY. Flow in Pillow-Plate
Channels for High-Speed Turbomachinery Heat Exchangers. International Journal
of Turbomachinery, Propulsion and Power. 2022;7(2). doi:10.3390/ijtpp7020012
apa: Sundermeier, S., Passmann, M., aus der Wiesche, S., & Kenig, E. Y. (2022).
Flow in Pillow-Plate Channels for High-Speed Turbomachinery Heat Exchangers. International
Journal of Turbomachinery, Propulsion and Power, 7(2), Article 12.
https://doi.org/10.3390/ijtpp7020012
bibtex: '@article{Sundermeier_Passmann_aus der Wiesche_Kenig_2022, title={Flow in
Pillow-Plate Channels for High-Speed Turbomachinery Heat Exchangers}, volume={7},
DOI={10.3390/ijtpp7020012},
number={212}, journal={International Journal of Turbomachinery, Propulsion and
Power}, publisher={MDPI AG}, author={Sundermeier, Stephan and Passmann, Maximilian
and aus der Wiesche, Stefan and Kenig, Eugeny Y.}, year={2022} }'
chicago: Sundermeier, Stephan, Maximilian Passmann, Stefan aus der Wiesche, and
Eugeny Y. Kenig. “Flow in Pillow-Plate Channels for High-Speed Turbomachinery
Heat Exchangers.” International Journal of Turbomachinery, Propulsion and Power
7, no. 2 (2022). https://doi.org/10.3390/ijtpp7020012.
ieee: 'S. Sundermeier, M. Passmann, S. aus der Wiesche, and E. Y. Kenig, “Flow in
Pillow-Plate Channels for High-Speed Turbomachinery Heat Exchangers,” International
Journal of Turbomachinery, Propulsion and Power, vol. 7, no. 2, Art. no. 12,
2022, doi: 10.3390/ijtpp7020012.'
mla: Sundermeier, Stephan, et al. “Flow in Pillow-Plate Channels for High-Speed
Turbomachinery Heat Exchangers.” International Journal of Turbomachinery, Propulsion
and Power, vol. 7, no. 2, 12, MDPI AG, 2022, doi:10.3390/ijtpp7020012.
short: S. Sundermeier, M. Passmann, S. aus der Wiesche, E.Y. Kenig, International
Journal of Turbomachinery, Propulsion and Power 7 (2022).
date_created: 2023-04-27T16:21:44Z
date_updated: 2023-04-27T16:53:41Z
department:
- _id: '145'
doi: 10.3390/ijtpp7020012
intvolume: ' 7'
issue: '2'
keyword:
- Mechanical Engineering
- Energy Engineering and Power Technology
- Aerospace Engineering
language:
- iso: eng
publication: International Journal of Turbomachinery, Propulsion and Power
publication_identifier:
issn:
- 2504-186X
publication_status: published
publisher: MDPI AG
quality_controlled: '1'
status: public
title: Flow in Pillow-Plate Channels for High-Speed Turbomachinery Heat Exchangers
type: journal_article
user_id: '90390'
volume: 7
year: '2022'
...
---
_id: '44243'
author:
- first_name: Eugeny Y.
full_name: Kenig, Eugeny Y.
id: '665'
last_name: Kenig
citation:
ama: 'Kenig EY. State-of-the-Art Modeling of Separation Columns: A Review. Chemical
Engineering Transactions. 2022;94:325-330.'
apa: 'Kenig, E. Y. (2022). State-of-the-Art Modeling of Separation Columns: A Review.
Chemical Engineering Transactions, 94, 325–330.'
bibtex: '@article{Kenig_2022, title={State-of-the-Art Modeling of Separation Columns:
A Review}, volume={94}, journal={Chemical Engineering Transactions}, author={Kenig,
Eugeny Y.}, year={2022}, pages={325–330} }'
chicago: 'Kenig, Eugeny Y. “State-of-the-Art Modeling of Separation Columns: A Review.”
Chemical Engineering Transactions 94 (2022): 325–30.'
ieee: 'E. Y. Kenig, “State-of-the-Art Modeling of Separation Columns: A Review,”
Chemical Engineering Transactions, vol. 94, pp. 325–330, 2022.'
mla: 'Kenig, Eugeny Y. “State-of-the-Art Modeling of Separation Columns: A Review.”
Chemical Engineering Transactions, vol. 94, 2022, pp. 325–30.'
short: E.Y. Kenig, Chemical Engineering Transactions 94 (2022) 325–330.
date_created: 2023-04-27T17:15:17Z
date_updated: 2023-04-27T17:15:26Z
department:
- _id: '145'
intvolume: ' 94'
language:
- iso: eng
page: 325-330
publication: Chemical Engineering Transactions
quality_controlled: '1'
status: public
title: 'State-of-the-Art Modeling of Separation Columns: A Review'
type: journal_article
user_id: '90390'
volume: 94
year: '2022'
...
---
_id: '33887'
author:
- first_name: Tural
full_name: Mamedov, Tural
last_name: Mamedov
- first_name: Eckhard
full_name: Schleicher, Eckhard
last_name: Schleicher
- first_name: Markus
full_name: Schubert, Markus
last_name: Schubert
- first_name: Thomas
full_name: Ehlert, Thomas
id: '47151'
last_name: Ehlert
- first_name: Eugeny Y.
full_name: Kenig, Eugeny Y.
id: '665'
last_name: Kenig
- first_name: Uwe
full_name: Hampel, Uwe
last_name: Hampel
citation:
ama: 'Mamedov T, Schleicher E, Schubert M, Ehlert T, Kenig EY, Hampel U. Flow Morphology
of TEG Desiccant in a Structured Packing Air Dehumidifier Exposed to Floating
Conditions. In: Proceedings of the 12th International Conference Distillation
& Absorption 2022. ; 2022.'
apa: Mamedov, T., Schleicher, E., Schubert, M., Ehlert, T., Kenig, E. Y., &
Hampel, U. (2022). Flow Morphology of TEG Desiccant in a Structured Packing Air
Dehumidifier Exposed to Floating Conditions. Proceedings of the 12th International
Conference Distillation & Absorption 2022. The 12th International Conference
Distillation & Absorption 2022, Toulouse, France .
bibtex: '@inproceedings{Mamedov_Schleicher_Schubert_Ehlert_Kenig_Hampel_2022, title={Flow
Morphology of TEG Desiccant in a Structured Packing Air Dehumidifier Exposed to
Floating Conditions}, booktitle={Proceedings of the 12th international conference
Distillation & Absorption 2022}, author={Mamedov, Tural and Schleicher, Eckhard
and Schubert, Markus and Ehlert, Thomas and Kenig, Eugeny Y. and Hampel, Uwe},
year={2022} }'
chicago: Mamedov, Tural, Eckhard Schleicher, Markus Schubert, Thomas Ehlert, Eugeny
Y. Kenig, and Uwe Hampel. “Flow Morphology of TEG Desiccant in a Structured Packing
Air Dehumidifier Exposed to Floating Conditions.” In Proceedings of the 12th
International Conference Distillation & Absorption 2022, 2022.
ieee: T. Mamedov, E. Schleicher, M. Schubert, T. Ehlert, E. Y. Kenig, and U. Hampel,
“Flow Morphology of TEG Desiccant in a Structured Packing Air Dehumidifier Exposed
to Floating Conditions,” presented at the The 12th International Conference Distillation
& Absorption 2022, Toulouse, France , 2022.
mla: Mamedov, Tural, et al. “Flow Morphology of TEG Desiccant in a Structured Packing
Air Dehumidifier Exposed to Floating Conditions.” Proceedings of the 12th International
Conference Distillation & Absorption 2022, 2022.
short: 'T. Mamedov, E. Schleicher, M. Schubert, T. Ehlert, E.Y. Kenig, U. Hampel,
in: Proceedings of the 12th International Conference Distillation & Absorption
2022, 2022.'
conference:
end_date: 2022-09-21
location: 'Toulouse, France '
name: The 12th International Conference Distillation & Absorption 2022
start_date: 2022-09-18
date_created: 2022-10-26T10:52:40Z
date_updated: 2023-04-28T04:45:20Z
department:
- _id: '9'
- _id: '145'
language:
- iso: eng
publication: Proceedings of the 12th international conference Distillation & Absorption
2022
quality_controlled: '1'
status: public
title: Flow Morphology of TEG Desiccant in a Structured Packing Air Dehumidifier Exposed
to Floating Conditions
type: conference
user_id: '47151'
year: '2022'
...
---
_id: '34113'
author:
- first_name: Michael
full_name: Haase, Michael
id: '35970'
last_name: Haase
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: 'Haase M, Zimmer D. Systematic Investigations Concerning Eddy Currents in Additively
Manufactured Structures. In: Innovative Product Development by Additive Manufacturing
2021. Springer International Publishing; 2022. doi:10.1007/978-3-031-05918-6_10'
apa: Haase, M., & Zimmer, D. (2022). Systematic Investigations Concerning Eddy
Currents in Additively Manufactured Structures. In Innovative Product Development
by Additive Manufacturing 2021. Springer International Publishing. https://doi.org/10.1007/978-3-031-05918-6_10
bibtex: '@inbook{Haase_Zimmer_2022, place={Cham}, title={Systematic Investigations
Concerning Eddy Currents in Additively Manufactured Structures}, DOI={10.1007/978-3-031-05918-6_10},
booktitle={Innovative Product Development by Additive Manufacturing 2021}, publisher={Springer
International Publishing}, author={Haase, Michael and Zimmer, Detmar}, year={2022}
}'
chicago: 'Haase, Michael, and Detmar Zimmer. “Systematic Investigations Concerning
Eddy Currents in Additively Manufactured Structures.” In Innovative Product
Development by Additive Manufacturing 2021. Cham: Springer International Publishing,
2022. https://doi.org/10.1007/978-3-031-05918-6_10.'
ieee: 'M. Haase and D. Zimmer, “Systematic Investigations Concerning Eddy Currents
in Additively Manufactured Structures,” in Innovative Product Development by
Additive Manufacturing 2021, Cham: Springer International Publishing, 2022.'
mla: Haase, Michael, and Detmar Zimmer. “Systematic Investigations Concerning Eddy
Currents in Additively Manufactured Structures.” Innovative Product Development
by Additive Manufacturing 2021, Springer International Publishing, 2022, doi:10.1007/978-3-031-05918-6_10.
short: 'M. Haase, D. Zimmer, in: Innovative Product Development by Additive Manufacturing
2021, Springer International Publishing, Cham, 2022.'
date_created: 2022-11-18T12:18:00Z
date_updated: 2023-04-28T05:24:04Z
department:
- _id: '146'
- _id: '219'
doi: 10.1007/978-3-031-05918-6_10
language:
- iso: eng
place: Cham
publication: Innovative Product Development by Additive Manufacturing 2021
publication_identifier:
isbn:
- '9783031059179'
- '9783031059186'
publication_status: published
publisher: Springer International Publishing
quality_controlled: '1'
status: public
title: Systematic Investigations Concerning Eddy Currents in Additively Manufactured
Structures
type: book_chapter
user_id: '35970'
year: '2022'
...
---
_id: '30736'
abstract:
- lang: eng
text: In this study, an innovative friction model is used to improve the quality
of clinching process simulations. Consequently, the future over dimensioning can
be reduced. Furthermore, the improved prediction quality of the joining process
simulation leads to an improvement in the simulation of load-bearing capacity
as well. In this way, the entire sampling process can be performed virtually without
any experimental investigations. This will contribute to the advancement of lightweight
construction in the automotive industry. In this work, the frictional behavior
is studied in dependence on the local joining process parameters. As a reference
for the numerical investigations, clinch joints by means of a die with fixed geometry
are joined. Additionally, a hardness mapping is performed on the microsection
of the clinch joints. It shows the local strain hardening, which correlates with
the forming degree in the simulation. Based on the occurring contacts and the
local joining process parameters in the joining process simulation, the test matrix
for the experimental friction tests is defined. The friction tests are carried
out on a compression-torsion-tribometer. This type of tribometer is able to apply
high interface pressures above the initial yield stress due to the specimen encapsulation.
Besides, the pure joining part contact, the contact between the joining part and
joining tool can be tested as well. The experimental test setup offers the possibility
to evaluate the influences of temperature, relative velocity, interface pressure,
and frictional stroke independently. Based on the results of the experimental
friction tests, a friction model is created. The resulting friction model is integrated
into the numerical joining process simulation via a subroutine. To validate the
quality of the new friction modeling, the results of simulations are compared
with the experiments in terms of load-stroke diagrams, joint geometry, and hardness
mappings on the microsection.
article_number: '146442072210742'
author:
- first_name: Moritz Sebastian
full_name: Rossel, Moritz Sebastian
id: '44503'
last_name: Rossel
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Rossel MS, Meschut G. Increasing the accuracy of clinching process simulations
by modeling the friction as a function of local joining process parameters. Proceedings
of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design
and Applications. Published online 2022. doi:10.1177/14644207221074290'
apa: 'Rossel, M. S., & Meschut, G. (2022). Increasing the accuracy of clinching
process simulations by modeling the friction as a function of local joining process
parameters. Proceedings of the Institution of Mechanical Engineers, Part L:
Journal of Materials: Design and Applications, Article 146442072210742. https://doi.org/10.1177/14644207221074290'
bibtex: '@article{Rossel_Meschut_2022, title={Increasing the accuracy of clinching
process simulations by modeling the friction as a function of local joining process
parameters}, DOI={10.1177/14644207221074290},
number={146442072210742}, journal={Proceedings of the Institution of Mechanical
Engineers, Part L: Journal of Materials: Design and Applications}, publisher={SAGE
Publications}, author={Rossel, Moritz Sebastian and Meschut, Gerson}, year={2022}
}'
chicago: 'Rossel, Moritz Sebastian, and Gerson Meschut. “Increasing the Accuracy
of Clinching Process Simulations by Modeling the Friction as a Function of Local
Joining Process Parameters.” Proceedings of the Institution of Mechanical Engineers,
Part L: Journal of Materials: Design and Applications, 2022. https://doi.org/10.1177/14644207221074290.'
ieee: 'M. S. Rossel and G. Meschut, “Increasing the accuracy of clinching process
simulations by modeling the friction as a function of local joining process parameters,”
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of
Materials: Design and Applications, Art. no. 146442072210742, 2022, doi: 10.1177/14644207221074290.'
mla: 'Rossel, Moritz Sebastian, and Gerson Meschut. “Increasing the Accuracy of
Clinching Process Simulations by Modeling the Friction as a Function of Local
Joining Process Parameters.” Proceedings of the Institution of Mechanical Engineers,
Part L: Journal of Materials: Design and Applications, 146442072210742, SAGE
Publications, 2022, doi:10.1177/14644207221074290.'
short: 'M.S. Rossel, G. Meschut, Proceedings of the Institution of Mechanical Engineers,
Part L: Journal of Materials: Design and Applications (2022).'
date_created: 2022-04-04T10:10:49Z
date_updated: 2023-04-28T09:13:12Z
department:
- _id: '157'
doi: 10.1177/14644207221074290
keyword:
- Mechanical Engineering
- General Materials Science
language:
- iso: eng
publication: 'Proceedings of the Institution of Mechanical Engineers, Part L: Journal
of Materials: Design and Applications'
publication_identifier:
issn:
- 1464-4207
- 2041-3076
publication_status: published
publisher: SAGE Publications
quality_controlled: '1'
status: public
title: Increasing the accuracy of clinching process simulations by modeling the friction
as a function of local joining process parameters
type: journal_article
user_id: '23175'
year: '2022'
...
---
_id: '34654'
author:
- first_name: Ihsan Murat
full_name: Kusoglu, Ihsan Murat
last_name: Kusoglu
- first_name: Pascal
full_name: Vieth, Pascal
last_name: Vieth
- first_name: Steffen
full_name: Heiland, Steffen
id: '77250'
last_name: Heiland
- first_name: Florian
full_name: Huber, Florian
last_name: Huber
- first_name: Arne
full_name: Lüddecke, Arne
last_name: Lüddecke
- first_name: Anna Rosa
full_name: Ziefuss, Anna Rosa
last_name: Ziefuss
- first_name: Arno
full_name: Kwade, Arno
last_name: Kwade
- first_name: Michael
full_name: Schmidt, Michael
last_name: Schmidt
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
- first_name: Stephan
full_name: Barcikowski, Stephan
last_name: Barcikowski
- first_name: Guido
full_name: Grundmeier, Guido
id: '194'
last_name: Grundmeier
citation:
ama: Kusoglu IM, Vieth P, Heiland S, et al. Microstructure and corrosion properties
of PBF-LB produced carbide nanoparticles additivated AlSi10Mg parts. Procedia
CIRP. 2022;111:10-13. doi:10.1016/j.procir.2022.08.046
apa: Kusoglu, I. M., Vieth, P., Heiland, S., Huber, F., Lüddecke, A., Ziefuss, A.
R., Kwade, A., Schmidt, M., Schaper, M., Barcikowski, S., & Grundmeier, G.
(2022). Microstructure and corrosion properties of PBF-LB produced carbide nanoparticles
additivated AlSi10Mg parts. Procedia CIRP, 111, 10–13. https://doi.org/10.1016/j.procir.2022.08.046
bibtex: '@article{Kusoglu_Vieth_Heiland_Huber_Lüddecke_Ziefuss_Kwade_Schmidt_Schaper_Barcikowski_et
al._2022, title={Microstructure and corrosion properties of PBF-LB produced carbide
nanoparticles additivated AlSi10Mg parts}, volume={111}, DOI={10.1016/j.procir.2022.08.046},
journal={Procedia CIRP}, publisher={Elsevier BV}, author={Kusoglu, Ihsan Murat
and Vieth, Pascal and Heiland, Steffen and Huber, Florian and Lüddecke, Arne and
Ziefuss, Anna Rosa and Kwade, Arno and Schmidt, Michael and Schaper, Mirko and
Barcikowski, Stephan and et al.}, year={2022}, pages={10–13} }'
chicago: 'Kusoglu, Ihsan Murat, Pascal Vieth, Steffen Heiland, Florian Huber, Arne
Lüddecke, Anna Rosa Ziefuss, Arno Kwade, et al. “Microstructure and Corrosion
Properties of PBF-LB Produced Carbide Nanoparticles Additivated AlSi10Mg Parts.”
Procedia CIRP 111 (2022): 10–13. https://doi.org/10.1016/j.procir.2022.08.046.'
ieee: 'I. M. Kusoglu et al., “Microstructure and corrosion properties of
PBF-LB produced carbide nanoparticles additivated AlSi10Mg parts,” Procedia
CIRP, vol. 111, pp. 10–13, 2022, doi: 10.1016/j.procir.2022.08.046.'
mla: Kusoglu, Ihsan Murat, et al. “Microstructure and Corrosion Properties of PBF-LB
Produced Carbide Nanoparticles Additivated AlSi10Mg Parts.” Procedia CIRP,
vol. 111, Elsevier BV, 2022, pp. 10–13, doi:10.1016/j.procir.2022.08.046.
short: I.M. Kusoglu, P. Vieth, S. Heiland, F. Huber, A. Lüddecke, A.R. Ziefuss,
A. Kwade, M. Schmidt, M. Schaper, S. Barcikowski, G. Grundmeier, Procedia CIRP
111 (2022) 10–13.
date_created: 2022-12-21T09:35:47Z
date_updated: 2023-04-28T09:00:53Z
department:
- _id: '302'
doi: 10.1016/j.procir.2022.08.046
intvolume: ' 111'
keyword:
- General Medicine
language:
- iso: eng
page: 10-13
publication: Procedia CIRP
publication_identifier:
issn:
- 2212-8271
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Microstructure and corrosion properties of PBF-LB produced carbide nanoparticles
additivated AlSi10Mg parts
type: journal_article
user_id: '43720'
volume: 111
year: '2022'
...
---
_id: '28766'
article_number: '103072'
article_type: original
author:
- first_name: Sascha
full_name: Sander, Sascha
id: '23175'
last_name: Sander
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: U.
full_name: Kroll, U.
last_name: Kroll
- first_name: A.
full_name: Matzenmiller, A.
last_name: Matzenmiller
citation:
ama: Sander S, Meschut G, Kroll U, Matzenmiller A. Methodology for the systematic
investigation of the hygrothermal-mechanical behavior of a structural epoxy adhesive.
International Journal of Adhesion and Adhesives. Published online 2022.
doi:10.1016/j.ijadhadh.2021.103072
apa: Sander, S., Meschut, G., Kroll, U., & Matzenmiller, A. (2022). Methodology
for the systematic investigation of the hygrothermal-mechanical behavior of a
structural epoxy adhesive. International Journal of Adhesion and Adhesives,
Article 103072. https://doi.org/10.1016/j.ijadhadh.2021.103072
bibtex: '@article{Sander_Meschut_Kroll_Matzenmiller_2022, title={Methodology for
the systematic investigation of the hygrothermal-mechanical behavior of a structural
epoxy adhesive}, DOI={10.1016/j.ijadhadh.2021.103072},
number={103072}, journal={International Journal of Adhesion and Adhesives}, publisher={Elsevier},
author={Sander, Sascha and Meschut, Gerson and Kroll, U. and Matzenmiller, A.},
year={2022} }'
chicago: Sander, Sascha, Gerson Meschut, U. Kroll, and A. Matzenmiller. “Methodology
for the Systematic Investigation of the Hygrothermal-Mechanical Behavior of a
Structural Epoxy Adhesive.” International Journal of Adhesion and Adhesives,
2022. https://doi.org/10.1016/j.ijadhadh.2021.103072.
ieee: 'S. Sander, G. Meschut, U. Kroll, and A. Matzenmiller, “Methodology for the
systematic investigation of the hygrothermal-mechanical behavior of a structural
epoxy adhesive,” International Journal of Adhesion and Adhesives, Art.
no. 103072, 2022, doi: 10.1016/j.ijadhadh.2021.103072.'
mla: Sander, Sascha, et al. “Methodology for the Systematic Investigation of the
Hygrothermal-Mechanical Behavior of a Structural Epoxy Adhesive.” International
Journal of Adhesion and Adhesives, 103072, Elsevier, 2022, doi:10.1016/j.ijadhadh.2021.103072.
short: S. Sander, G. Meschut, U. Kroll, A. Matzenmiller, International Journal of
Adhesion and Adhesives (2022).
date_created: 2021-12-14T08:46:44Z
date_updated: 2023-04-28T09:03:26Z
department:
- _id: '157'
doi: 10.1016/j.ijadhadh.2021.103072
language:
- iso: eng
publication: International Journal of Adhesion and Adhesives
publication_identifier:
issn:
- 0143-7496
publication_status: published
publisher: Elsevier
quality_controlled: '1'
status: public
title: Methodology for the systematic investigation of the hygrothermal-mechanical
behavior of a structural epoxy adhesive
type: journal_article
user_id: '23175'
year: '2022'
...
---
_id: '23785'
abstract:
- lang: eng
text: "Abstract\r\n In two-phase
flows in which the Capillary number is low, errors in the computation of the surface
tension force at the interface cause Front-Capturing methods such as Volume of
Fluid (VOF) and Level-Set (LS) to develop interfacial spurious currents. To better
solve low Capillary number flows, special treatment is required to reduce such
spurious currents. Smoothing the phase indicator field to more accurately compute
the curvature or adding interfacial artificial viscosity are techniques that can
treat this problem. This study explores OpenFOAM, Fluent and StarCCM+ VOF solvers
for the classical case of a static bubble/droplet immersed in a continuous aqueous
phase, with the focus on the ability of these solvers to adequately reduce spurious
currents. The results are expected to be helpful for practicing chemical engineers
who use multiphase CFD solvers in their work."
author:
- first_name: Venkatesh
full_name: Inguva, Venkatesh
id: '75069'
last_name: Inguva
- first_name: Andreas
full_name: Schulz, Andreas
id: '63109'
last_name: Schulz
- first_name: Eugeny
full_name: Kenig, Eugeny
id: '665'
last_name: Kenig
citation:
ama: 'Inguva V, Schulz A, Kenig E. On methods to reduce spurious currents within
VOF solver frameworks. Part 1: a review of the static bubble/droplet. Chemical
Product and Process Modeling. 2022;17:121-135.'
apa: 'Inguva, V., Schulz, A., & Kenig, E. (2022). On methods to reduce spurious
currents within VOF solver frameworks. Part 1: a review of the static bubble/droplet.
Chemical Product and Process Modeling, 17, 121–135.'
bibtex: '@article{Inguva_Schulz_Kenig_2022, title={On methods to reduce spurious
currents within VOF solver frameworks. Part 1: a review of the static bubble/droplet},
volume={17}, journal={Chemical Product and Process Modeling}, author={Inguva,
Venkatesh and Schulz, Andreas and Kenig, Eugeny}, year={2022}, pages={121–135}
}'
chicago: 'Inguva, Venkatesh, Andreas Schulz, and Eugeny Kenig. “On Methods to Reduce
Spurious Currents within VOF Solver Frameworks. Part 1: A Review of the Static
Bubble/Droplet.” Chemical Product and Process Modeling 17 (2022): 121–35.'
ieee: 'V. Inguva, A. Schulz, and E. Kenig, “On methods to reduce spurious currents
within VOF solver frameworks. Part 1: a review of the static bubble/droplet,”
Chemical Product and Process Modeling, vol. 17, pp. 121–135, 2022.'
mla: 'Inguva, Venkatesh, et al. “On Methods to Reduce Spurious Currents within VOF
Solver Frameworks. Part 1: A Review of the Static Bubble/Droplet.” Chemical
Product and Process Modeling, vol. 17, 2022, pp. 121–35.'
short: V. Inguva, A. Schulz, E. Kenig, Chemical Product and Process Modeling 17
(2022) 121–135.
date_created: 2021-09-06T09:59:46Z
date_updated: 2023-04-28T10:38:34Z
department:
- _id: '9'
- _id: '145'
intvolume: ' 17'
language:
- iso: eng
page: 121-135
publication: Chemical Product and Process Modeling
publication_identifier:
issn:
- 1934-2659
- 2194-6159
publication_status: published
quality_controlled: '1'
status: public
title: 'On methods to reduce spurious currents within VOF solver frameworks. Part
1: a review of the static bubble/droplet'
type: journal_article
user_id: '665'
volume: 17
year: '2022'
...
---
_id: '44236'
article_number: '117097'
author:
- first_name: Marc
full_name: Wende, Marc
id: '71302'
last_name: Wende
- first_name: Christoph
full_name: Staggenborg, Christoph
last_name: Staggenborg
- first_name: Eugeny Y.
full_name: Kenig, Eugeny Y.
id: '665'
last_name: Kenig
citation:
ama: Wende M, Staggenborg C, Kenig EY. Modelling and simulation of zero-gravity
distillation units with metal foams. Chemical Engineering Science. 2022;247.
doi:10.1016/j.ces.2021.117097
apa: Wende, M., Staggenborg, C., & Kenig, E. Y. (2022). Modelling and simulation
of zero-gravity distillation units with metal foams. Chemical Engineering Science,
247, Article 117097. https://doi.org/10.1016/j.ces.2021.117097
bibtex: '@article{Wende_Staggenborg_Kenig_2022, title={Modelling and simulation
of zero-gravity distillation units with metal foams}, volume={247}, DOI={10.1016/j.ces.2021.117097},
number={117097}, journal={Chemical Engineering Science}, publisher={Elsevier BV},
author={Wende, Marc and Staggenborg, Christoph and Kenig, Eugeny Y.}, year={2022}
}'
chicago: Wende, Marc, Christoph Staggenborg, and Eugeny Y. Kenig. “Modelling and
Simulation of Zero-Gravity Distillation Units with Metal Foams.” Chemical Engineering
Science 247 (2022). https://doi.org/10.1016/j.ces.2021.117097.
ieee: 'M. Wende, C. Staggenborg, and E. Y. Kenig, “Modelling and simulation of zero-gravity
distillation units with metal foams,” Chemical Engineering Science, vol.
247, Art. no. 117097, 2022, doi: 10.1016/j.ces.2021.117097.'
mla: Wende, Marc, et al. “Modelling and Simulation of Zero-Gravity Distillation
Units with Metal Foams.” Chemical Engineering Science, vol. 247, 117097,
Elsevier BV, 2022, doi:10.1016/j.ces.2021.117097.
short: M. Wende, C. Staggenborg, E.Y. Kenig, Chemical Engineering Science 247 (2022).
date_created: 2023-04-27T16:06:49Z
date_updated: 2023-04-28T10:57:47Z
department:
- _id: '145'
doi: 10.1016/j.ces.2021.117097
intvolume: ' 247'
keyword:
- Applied Mathematics
- Industrial and Manufacturing Engineering
- General Chemical Engineering
- General Chemistry
language:
- iso: eng
publication: Chemical Engineering Science
publication_identifier:
issn:
- 0009-2509
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Modelling and simulation of zero-gravity distillation units with metal foams
type: journal_article
user_id: '665'
volume: 247
year: '2022'
...
---
_id: '33479'
author:
- first_name: Mike
full_name: Bothe, Mike
id: '72973'
last_name: Bothe
- first_name: Nicole
full_name: Lutters, Nicole
id: '22006'
last_name: Lutters
- first_name: Eugeny Y.
full_name: Kenig, Eugeny Y.
id: '665'
last_name: Kenig
citation:
ama: 'Bothe M, Lutters N, Kenig EY. Model Based and Experimental Analysis of the
Dynamic Reactive Absorption Loop Behavior. In: Proceedings of the 12th International
Conference Distillation & Absorption 2022. ; 2022.'
apa: Bothe, M., Lutters, N., & Kenig, E. Y. (2022). Model Based and Experimental
Analysis of the Dynamic Reactive Absorption Loop Behavior. Proceedings of the
12th International Conference Distillation & Absorption 2022. The 12th
International Conference Distillation & Absorption 2022, Toulouse, France.
bibtex: '@inproceedings{Bothe_Lutters_Kenig_2022, title={Model Based and Experimental
Analysis of the Dynamic Reactive Absorption Loop Behavior}, booktitle={Proceedings
of the 12th international conference Distillation & Absorption 2022}, author={Bothe,
Mike and Lutters, Nicole and Kenig, Eugeny Y.}, year={2022} }'
chicago: Bothe, Mike, Nicole Lutters, and Eugeny Y. Kenig. “Model Based and Experimental
Analysis of the Dynamic Reactive Absorption Loop Behavior.” In Proceedings
of the 12th International Conference Distillation & Absorption 2022, 2022.
ieee: M. Bothe, N. Lutters, and E. Y. Kenig, “Model Based and Experimental Analysis
of the Dynamic Reactive Absorption Loop Behavior,” presented at the The 12th International
Conference Distillation & Absorption 2022, Toulouse, France, 2022.
mla: Bothe, Mike, et al. “Model Based and Experimental Analysis of the Dynamic Reactive
Absorption Loop Behavior.” Proceedings of the 12th International Conference
Distillation & Absorption 2022, 2022.
short: 'M. Bothe, N. Lutters, E.Y. Kenig, in: Proceedings of the 12th International
Conference Distillation & Absorption 2022, 2022.'
conference:
end_date: 2022-09-21
location: Toulouse, France
name: The 12th International Conference Distillation & Absorption 2022
start_date: 2022-09-18
date_created: 2022-09-23T11:13:59Z
date_updated: 2023-04-28T10:41:17Z
department:
- _id: '9'
- _id: '145'
language:
- iso: eng
publication: Proceedings of the 12th international conference Distillation & Absorption
2022
quality_controlled: '1'
status: public
title: Model Based and Experimental Analysis of the Dynamic Reactive Absorption Loop
Behavior
type: conference
user_id: '665'
year: '2022'
...
---
_id: '44266'
author:
- first_name: Eugeny Y.
full_name: Kenig, Eugeny Y.
id: '665'
last_name: Kenig
citation:
ama: 'Kenig EY. Modeling Concepts for Reactive Separations. In: Skiborowski M, Górak
A, eds. Process Intensification by Reactive and Membrane-Assisted Separations.
2nd ed. De Gruyter; 2022. doi:10.1515/9783110720464'
apa: Kenig, E. Y. (2022). Modeling Concepts for Reactive Separations. In M. Skiborowski
& A. Górak (Eds.), Process Intensification by Reactive and Membrane-assisted
Separations (2nd ed.). De Gruyter. https://doi.org/10.1515/9783110720464
bibtex: '@inbook{Kenig_2022, place={Berlin, Boston}, edition={2}, title={Modeling
Concepts for Reactive Separations}, DOI={10.1515/9783110720464},
booktitle={Process Intensification by Reactive and Membrane-assisted Separations},
publisher={De Gruyter}, author={Kenig, Eugeny Y.}, editor={Skiborowski, Mirko
and Górak, Andrzej}, year={2022} }'
chicago: 'Kenig, Eugeny Y. “Modeling Concepts for Reactive Separations.” In Process
Intensification by Reactive and Membrane-Assisted Separations, edited by Mirko
Skiborowski and Andrzej Górak, 2nd ed. Berlin, Boston: De Gruyter, 2022. https://doi.org/10.1515/9783110720464.'
ieee: 'E. Y. Kenig, “Modeling Concepts for Reactive Separations,” in Process
Intensification by Reactive and Membrane-assisted Separations, 2nd ed., M.
Skiborowski and A. Górak, Eds. Berlin, Boston: De Gruyter, 2022.'
mla: Kenig, Eugeny Y. “Modeling Concepts for Reactive Separations.” Process Intensification
by Reactive and Membrane-Assisted Separations, edited by Mirko Skiborowski
and Andrzej Górak, 2nd ed., De Gruyter, 2022, doi:10.1515/9783110720464.
short: 'E.Y. Kenig, in: M. Skiborowski, A. Górak (Eds.), Process Intensification
by Reactive and Membrane-Assisted Separations, 2nd ed., De Gruyter, Berlin, Boston,
2022.'
date_created: 2023-04-28T10:31:50Z
date_updated: 2023-04-28T10:35:54Z
department:
- _id: '145'
doi: 10.1515/9783110720464
edition: '2'
editor:
- first_name: Mirko
full_name: Skiborowski, Mirko
last_name: Skiborowski
- first_name: Andrzej
full_name: Górak, Andrzej
last_name: Górak
language:
- iso: eng
place: Berlin, Boston
publication: Process Intensification by Reactive and Membrane-assisted Separations
publication_identifier:
isbn:
- '9783110720464'
publication_status: published
publisher: De Gruyter
quality_controlled: '1'
status: public
title: Modeling Concepts for Reactive Separations
type: book_chapter
user_id: '665'
year: '2022'
...
---
_id: '31496'
abstract:
- lang: eng
text: Carbon fiber reinforced plastics (CFRPs) gained high interest in industrial
applications because of their excellent strength and low specific weight. The
stacking sequence of the unidirectional plies forming a CFRP laminate, and their
thicknesses, primarily determine the mechanical performance. However, during manufacturing,
defects, e.g., pores and residual stresses, are induced, both affecting the mechanical
properties. The objective of the present work is to accurately measure residual
stresses in CFRPs as well as to investigate the effects of stacking sequence,
overall laminate thickness, and the presence of pores on the residual stress state.
Residual stresses were measured through the incremental hole-drilling method (HDM).
Adequate procedures have been applied to evaluate the residual stresses for orthotropic
materials, including calculating the calibration coefficients through finite element
analysis (FEA) based on stacking sequence, laminate thickness and mechanical properties.
Using optical microscopy (OM) and computed tomography (CT), profound insights
into the cross-sectional and three-dimensional microstructure, e.g., location
and shape of process-induced pores, were obtained. This microstructural information
allowed for a comprehensive understanding of the experimentally determined strain
and stress results, particularly at the transition zone between the individual
plies. The effect of pores on residual stresses was investigated by considering
pores to calculate the calibration coefficients at a depth of 0.06 mm to 0.12
mm in the model and utilizing these results for residual stress evaluation. A
maximum difference of 46% in stress between defect-free and porous material sample
conditions was observed at a hole depth of 0.65 mm. The significance of employing
correctly calculated coefficients for the residual stress evaluation is highlighted
by mechanical validation tests.
article_number: '138'
author:
- first_name: Tao
full_name: Wu, Tao
last_name: Wu
- first_name: Roland
full_name: Kruse, Roland
last_name: Kruse
- first_name: Steffen Rainer
full_name: Tinkloh, Steffen Rainer
id: '72722'
last_name: Tinkloh
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Wolfgang
full_name: Zinn, Wolfgang
last_name: Zinn
- first_name: Christian
full_name: Lauhoff, Christian
last_name: Lauhoff
- first_name: Thomas
full_name: Niendorf, Thomas
last_name: Niendorf
citation:
ama: 'Wu T, Kruse R, Tinkloh SR, et al. Experimental Analysis of Residual Stresses
in CFRPs through Hole-Drilling Method: The Role of Stacking Sequence, Thickness,
and Defects. Journal of Composites Science. 2022;6(5). doi:10.3390/jcs6050138'
apa: 'Wu, T., Kruse, R., Tinkloh, S. R., Tröster, T., Zinn, W., Lauhoff, C., &
Niendorf, T. (2022). Experimental Analysis of Residual Stresses in CFRPs through
Hole-Drilling Method: The Role of Stacking Sequence, Thickness, and Defects. Journal
of Composites Science, 6(5), Article 138. https://doi.org/10.3390/jcs6050138'
bibtex: '@article{Wu_Kruse_Tinkloh_Tröster_Zinn_Lauhoff_Niendorf_2022, title={Experimental
Analysis of Residual Stresses in CFRPs through Hole-Drilling Method: The Role
of Stacking Sequence, Thickness, and Defects}, volume={6}, DOI={10.3390/jcs6050138},
number={5138}, journal={Journal of Composites Science}, publisher={MDPI AG}, author={Wu,
Tao and Kruse, Roland and Tinkloh, Steffen Rainer and Tröster, Thomas and Zinn,
Wolfgang and Lauhoff, Christian and Niendorf, Thomas}, year={2022} }'
chicago: 'Wu, Tao, Roland Kruse, Steffen Rainer Tinkloh, Thomas Tröster, Wolfgang
Zinn, Christian Lauhoff, and Thomas Niendorf. “Experimental Analysis of Residual
Stresses in CFRPs through Hole-Drilling Method: The Role of Stacking Sequence,
Thickness, and Defects.” Journal of Composites Science 6, no. 5 (2022).
https://doi.org/10.3390/jcs6050138.'
ieee: 'T. Wu et al., “Experimental Analysis of Residual Stresses in CFRPs
through Hole-Drilling Method: The Role of Stacking Sequence, Thickness, and Defects,”
Journal of Composites Science, vol. 6, no. 5, Art. no. 138, 2022, doi:
10.3390/jcs6050138.'
mla: 'Wu, Tao, et al. “Experimental Analysis of Residual Stresses in CFRPs through
Hole-Drilling Method: The Role of Stacking Sequence, Thickness, and Defects.”
Journal of Composites Science, vol. 6, no. 5, 138, MDPI AG, 2022, doi:10.3390/jcs6050138.'
short: T. Wu, R. Kruse, S.R. Tinkloh, T. Tröster, W. Zinn, C. Lauhoff, T. Niendorf,
Journal of Composites Science 6 (2022).
date_created: 2022-05-30T07:04:34Z
date_updated: 2023-04-28T11:31:42Z
department:
- _id: '149'
- _id: '321'
doi: 10.3390/jcs6050138
funded_apc: '1'
intvolume: ' 6'
issue: '5'
keyword:
- Engineering (miscellaneous)
- Ceramics and Composites
language:
- iso: eng
publication: Journal of Composites Science
publication_identifier:
issn:
- 2504-477X
publication_status: published
publisher: MDPI AG
quality_controlled: '1'
status: public
title: 'Experimental Analysis of Residual Stresses in CFRPs through Hole-Drilling
Method: The Role of Stacking Sequence, Thickness, and Defects'
type: journal_article
user_id: '72722'
volume: 6
year: '2022'
...
---
_id: '30962'
abstract:
- lang: eng
text: Clinching as a mechanical joining process has become established
in many areas of car body. In order to predict relevant properties of clinched
joints and to ensure the reliability of the process, it is numerically simulated
during the product development process. The prediction accuracy of the simulated
process depends on the implemented friction model. Therefore, a new method for
determining friction coefficients in sheet metal materials was developed and tested.
The aim of this study is the numerical investigation of this experimental method
by means of FE simulation. The experimental setup is modelled in a 3D numerical
simulation taking into account the process parameters varying in the experiment,
such as geometric properties, contact pressure and contact velocity. Furthermore,
the contact description of the model is calibrated via the experimentally determined
friction coefficients according to clinch-relevant parameter space. It is shown
that the assumptions made in the determination of the experimental data in preliminary
work are valid. In addition, it is investigated to what extent the standard Coulomb
friction model in the FEM can reproduce the results of the experimental method.
article_number: '146442072210934'
author:
- first_name: Christian Roman
full_name: Bielak, Christian Roman
id: '34782'
last_name: Bielak
- first_name: Max
full_name: Böhnke, Max
id: '45779'
last_name: Böhnke
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Bielak CR, Böhnke M, Bobbert M, Meschut G. Numerical investigation of a friction
test to determine the friction coefficients for the clinching process. Proceedings
of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design
and Applications. Published online 2022. doi:10.1177/14644207221093468'
apa: 'Bielak, C. R., Böhnke, M., Bobbert, M., & Meschut, G. (2022). Numerical
investigation of a friction test to determine the friction coefficients for
the clinching process. Proceedings of the Institution of Mechanical Engineers,
Part L: Journal of Materials: Design and Applications, Article 146442072210934.
https://doi.org/10.1177/14644207221093468'
bibtex: '@article{Bielak_Böhnke_Bobbert_Meschut_2022, title={Numerical investigation
of a friction test to determine the friction coefficients for the clinching
process}, DOI={10.1177/14644207221093468},
number={146442072210934}, journal={Proceedings of the Institution of Mechanical
Engineers, Part L: Journal of Materials: Design and Applications}, publisher={SAGE
Publications}, author={Bielak, Christian Roman and Böhnke, Max and Bobbert, Mathias
and Meschut, Gerson}, year={2022} }'
chicago: 'Bielak, Christian Roman, Max Böhnke, Mathias Bobbert, and Gerson Meschut.
“Numerical Investigation of a Friction Test to Determine the Friction Coefficients
for the Clinching Process.” Proceedings of the Institution of Mechanical Engineers,
Part L: Journal of Materials: Design and Applications, 2022. https://doi.org/10.1177/14644207221093468.'
ieee: 'C. R. Bielak, M. Böhnke, M. Bobbert, and G. Meschut, “Numerical investigation
of a friction test to determine the friction coefficients for the clinching
process,” Proceedings of the Institution of Mechanical Engineers, Part L: Journal
of Materials: Design and Applications, Art. no. 146442072210934, 2022, doi:
10.1177/14644207221093468.'
mla: 'Bielak, Christian Roman, et al. “Numerical Investigation of a Friction Test
to Determine the Friction Coefficients for the Clinching Process.” Proceedings
of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design
and Applications, 146442072210934, SAGE Publications, 2022, doi:10.1177/14644207221093468.'
short: 'C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, Proceedings of the Institution
of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
(2022).'
date_created: 2022-04-27T08:58:11Z
date_updated: 2023-04-28T11:31:35Z
department:
- _id: '157'
- _id: '630'
doi: 10.1177/14644207221093468
keyword:
- Mechanical Engineering
- General Materials Science
language:
- iso: eng
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '131'
name: 'TRR 285 - A: TRR 285 - Project Area A'
- _id: '135'
name: 'TRR 285 – A01: TRR 285 - Subproject A01'
publication: 'Proceedings of the Institution of Mechanical Engineers, Part L: Journal
of Materials: Design and Applications'
publication_identifier:
issn:
- 1464-4207
- 2041-3076
publication_status: published
publisher: SAGE Publications
quality_controlled: '1'
status: public
title: Numerical investigation of a friction test to determine the friction coefficients
for the clinching process
type: journal_article
user_id: '34782'
year: '2022'
...
---
_id: '32814'
article_number: '116071'
author:
- first_name: T.
full_name: Wu, T.
last_name: Wu
- first_name: S.
full_name: Degener, S.
last_name: Degener
- first_name: Steffen Rainer
full_name: Tinkloh, Steffen Rainer
id: '72722'
last_name: Tinkloh
- first_name: A.
full_name: Liehr, A.
last_name: Liehr
- first_name: W.
full_name: Zinn, W.
last_name: Zinn
- first_name: J.P.
full_name: Nobre, J.P.
last_name: Nobre
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: T.
full_name: Niendorf, T.
last_name: Niendorf
citation:
ama: Wu T, Degener S, Tinkloh SR, et al. Characterization of residual stresses in
fiber metal laminate interfaces - A combined approach applying hole-drilling method
and energy-dispersive X-ray diffraction. Composite Structures. Published
online 2022. doi:10.1016/j.compstruct.2022.116071
apa: Wu, T., Degener, S., Tinkloh, S. R., Liehr, A., Zinn, W., Nobre, J. P., Tröster,
T., & Niendorf, T. (2022). Characterization of residual stresses in fiber
metal laminate interfaces - A combined approach applying hole-drilling method
and energy-dispersive X-ray diffraction. Composite Structures, Article
116071. https://doi.org/10.1016/j.compstruct.2022.116071
bibtex: '@article{Wu_Degener_Tinkloh_Liehr_Zinn_Nobre_Tröster_Niendorf_2022, title={Characterization
of residual stresses in fiber metal laminate interfaces - A combined approach
applying hole-drilling method and energy-dispersive X-ray diffraction}, DOI={10.1016/j.compstruct.2022.116071},
number={116071}, journal={Composite Structures}, publisher={Elsevier BV}, author={Wu,
T. and Degener, S. and Tinkloh, Steffen Rainer and Liehr, A. and Zinn, W. and
Nobre, J.P. and Tröster, Thomas and Niendorf, T.}, year={2022} }'
chicago: Wu, T., S. Degener, Steffen Rainer Tinkloh, A. Liehr, W. Zinn, J.P. Nobre,
Thomas Tröster, and T. Niendorf. “Characterization of Residual Stresses in Fiber
Metal Laminate Interfaces - A Combined Approach Applying Hole-Drilling Method
and Energy-Dispersive X-Ray Diffraction.” Composite Structures, 2022. https://doi.org/10.1016/j.compstruct.2022.116071.
ieee: 'T. Wu et al., “Characterization of residual stresses in fiber metal
laminate interfaces - A combined approach applying hole-drilling method and energy-dispersive
X-ray diffraction,” Composite Structures, Art. no. 116071, 2022, doi: 10.1016/j.compstruct.2022.116071.'
mla: Wu, T., et al. “Characterization of Residual Stresses in Fiber Metal Laminate
Interfaces - A Combined Approach Applying Hole-Drilling Method and Energy-Dispersive
X-Ray Diffraction.” Composite Structures, 116071, Elsevier BV, 2022, doi:10.1016/j.compstruct.2022.116071.
short: T. Wu, S. Degener, S.R. Tinkloh, A. Liehr, W. Zinn, J.P. Nobre, T. Tröster,
T. Niendorf, Composite Structures (2022).
date_created: 2022-08-15T11:03:54Z
date_updated: 2023-04-28T11:31:56Z
department:
- _id: '149'
- _id: '321'
doi: 10.1016/j.compstruct.2022.116071
keyword:
- Civil and Structural Engineering
- Ceramics and Composites
language:
- iso: eng
publication: Composite Structures
publication_identifier:
issn:
- 0263-8223
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Characterization of residual stresses in fiber metal laminate interfaces -
A combined approach applying hole-drilling method and energy-dispersive X-ray diffraction
type: journal_article
user_id: '72722'
year: '2022'
...
---
_id: '44267'
author:
- first_name: Marc
full_name: Wende, Marc
id: '71302'
last_name: Wende
- first_name: Eugeny Y.
full_name: Kenig, Eugeny Y.
id: '665'
last_name: Kenig
citation:
ama: 'Wende M, Kenig EY. Modeling of a hybrid process combining zero-gravity distillation
and vapor permeation. In: Proceedings Int. Conf. „Distillation and Absorption
2022”. ; 2022.'
apa: Wende, M., & Kenig, E. Y. (2022). Modeling of a hybrid process combining
zero-gravity distillation and vapor permeation. Proceedings Int. Conf. „Distillation
and Absorption 2022”.
bibtex: '@inproceedings{Wende_Kenig_2022, title={Modeling of a hybrid process combining
zero-gravity distillation and vapor permeation}, booktitle={Proceedings Int. Conf.
„Distillation and Absorption 2022”}, author={Wende, Marc and Kenig, Eugeny Y.},
year={2022} }'
chicago: Wende, Marc, and Eugeny Y. Kenig. “Modeling of a Hybrid Process Combining
Zero-Gravity Distillation and Vapor Permeation.” In Proceedings Int. Conf.
„Distillation and Absorption 2022”, 2022.
ieee: M. Wende and E. Y. Kenig, “Modeling of a hybrid process combining zero-gravity
distillation and vapor permeation,” 2022.
mla: Wende, Marc, and Eugeny Y. Kenig. “Modeling of a Hybrid Process Combining Zero-Gravity
Distillation and Vapor Permeation.” Proceedings Int. Conf. „Distillation and
Absorption 2022”, 2022.
short: 'M. Wende, E.Y. Kenig, in: Proceedings Int. Conf. „Distillation and Absorption
2022”, 2022.'
date_created: 2023-04-28T11:01:10Z
date_updated: 2023-04-28T11:01:17Z
language:
- iso: eng
publication: Proceedings Int. Conf. „Distillation and Absorption 2022”
quality_controlled: '1'
status: public
title: Modeling of a hybrid process combining zero-gravity distillation and vapor
permeation
type: conference
user_id: '665'
year: '2022'
...