---
_id: '20644'
abstract:
- lang: eng
text: Plasmonic nanoantennas for visible and infrared radiation strongly improve
the interaction of light with the matter on the nanoscale due to their strong
near-field enhancement. In this study, we investigate a double-resonant plasmonic
nanoantenna, which makes use of plasmonic field enhancement, enhanced outcoupling
of second harmonic light, and resonant lattice effects. Using this design, we
demonstrate how the efficiency of second harmonic generation can be increased
significantly by fully embedding the nanoantennas into nonlinear dielectric material
ZnO, instead of placing them on the surface. Investigating two different processes,
we found that the best fabrication route is embedding the gold nanoantennas in
ZnO using an MBE overgrowth process where a thin ZnO layer was deposited on nanoantennas
fabricated on a ZnO substrate. In addition, second harmonic generation measurements
show that the embedding leads to an enhancement compared to the emission of nanoantennas
placed on the ZnO substrate surface. These promising results facilitate further
research to determine the influence of the periodicity of the nanoantenna arrangement
of the resulting SHG signal.
article_number: '043107'
article_type: original
author:
- first_name: Ruth
full_name: Volmert, Ruth
last_name: Volmert
- first_name: Nils
full_name: Weber, Nils
last_name: Weber
- first_name: Cedrik
full_name: Meier, Cedrik
id: '20798'
last_name: Meier
orcid: https://orcid.org/0000-0002-3787-3572
citation:
ama: Volmert R, Weber N, Meier C. Nanoantennas embedded in zinc oxide for second
harmonic generation enhancement. Journal of Applied Physics. 2020;128(4).
doi:10.1063/5.0012813
apa: Volmert, R., Weber, N., & Meier, C. (2020). Nanoantennas embedded in zinc
oxide for second harmonic generation enhancement. Journal of Applied Physics,
128(4). https://doi.org/10.1063/5.0012813
bibtex: '@article{Volmert_Weber_Meier_2020, title={Nanoantennas embedded in zinc
oxide for second harmonic generation enhancement}, volume={128}, DOI={10.1063/5.0012813},
number={4043107}, journal={Journal of Applied Physics}, author={Volmert, Ruth
and Weber, Nils and Meier, Cedrik}, year={2020} }'
chicago: Volmert, Ruth, Nils Weber, and Cedrik Meier. “Nanoantennas Embedded in
Zinc Oxide for Second Harmonic Generation Enhancement.” Journal of Applied
Physics 128, no. 4 (2020). https://doi.org/10.1063/5.0012813.
ieee: R. Volmert, N. Weber, and C. Meier, “Nanoantennas embedded in zinc oxide for
second harmonic generation enhancement,” Journal of Applied Physics, vol.
128, no. 4, 2020.
mla: Volmert, Ruth, et al. “Nanoantennas Embedded in Zinc Oxide for Second Harmonic
Generation Enhancement.” Journal of Applied Physics, vol. 128, no. 4, 043107,
2020, doi:10.1063/5.0012813.
short: R. Volmert, N. Weber, C. Meier, Journal of Applied Physics 128 (2020).
date_created: 2020-12-02T12:57:58Z
date_updated: 2022-01-06T06:54:31Z
department:
- _id: '230'
- _id: '429'
doi: 10.1063/5.0012813
external_id:
isi:
- '000557311900001'
intvolume: ' 128'
isi: '1'
issue: '4'
language:
- iso: eng
project:
- _id: '53'
name: TRR 142
- _id: '55'
name: TRR 142 - Project Area B
- _id: '66'
name: TRR 142 - Subproject B1
- _id: '56'
name: TRR 142 - Project Area C
- _id: '75'
name: TRR 142 - Subproject C5
publication: Journal of Applied Physics
publication_identifier:
eissn:
- 1089-7550
issn:
- 0021-8979
publication_status: published
quality_controlled: '1'
status: public
title: Nanoantennas embedded in zinc oxide for second harmonic generation enhancement
type: journal_article
user_id: '20798'
volume: 128
year: '2020'
...
---
_id: '18350'
article_type: original
author:
- first_name: Christian
full_name: Koldewey, Christian
id: '43136'
last_name: Koldewey
orcid: https://orcid.org/0000-0001-7992-6399
- first_name: Maurice
full_name: Meyer, Maurice
id: '77201'
last_name: Meyer
orcid: 0000-0003-0606-7321
- first_name: Patrick
full_name: Stockbrügger, Patrick
last_name: Stockbrügger
- first_name: Roman
full_name: Dumitrescu, Roman
id: '16190'
last_name: Dumitrescu
- first_name: Jürgen
full_name: Gausemeier, Jürgen
last_name: Gausemeier
citation:
ama: Koldewey C, Meyer M, Stockbrügger P, Dumitrescu R, Gausemeier J. Framework
and Functionality Patterns for Smart Service Innovation. Procedia CIRP.
2020;(91):851-857. doi:10.1016/j.procir.2020.02.244
apa: Koldewey, C., Meyer, M., Stockbrügger, P., Dumitrescu, R., & Gausemeier,
J. (2020). Framework and Functionality Patterns for Smart Service Innovation.
Procedia CIRP, (91), 851–857. https://doi.org/10.1016/j.procir.2020.02.244
bibtex: '@article{Koldewey_Meyer_Stockbrügger_Dumitrescu_Gausemeier_2020, title={Framework
and Functionality Patterns for Smart Service Innovation}, DOI={10.1016/j.procir.2020.02.244},
number={91}, journal={Procedia CIRP}, author={Koldewey, Christian and Meyer, Maurice
and Stockbrügger, Patrick and Dumitrescu, Roman and Gausemeier, Jürgen}, year={2020},
pages={851–857} }'
chicago: 'Koldewey, Christian, Maurice Meyer, Patrick Stockbrügger, Roman Dumitrescu,
and Jürgen Gausemeier. “Framework and Functionality Patterns for Smart Service
Innovation.” Procedia CIRP, no. 91 (2020): 851–57. https://doi.org/10.1016/j.procir.2020.02.244.'
ieee: C. Koldewey, M. Meyer, P. Stockbrügger, R. Dumitrescu, and J. Gausemeier,
“Framework and Functionality Patterns for Smart Service Innovation,” Procedia
CIRP, no. 91, pp. 851–857, 2020.
mla: Koldewey, Christian, et al. “Framework and Functionality Patterns for Smart
Service Innovation.” Procedia CIRP, no. 91, 2020, pp. 851–57, doi:10.1016/j.procir.2020.02.244.
short: C. Koldewey, M. Meyer, P. Stockbrügger, R. Dumitrescu, J. Gausemeier, Procedia
CIRP (2020) 851–857.
date_created: 2020-08-26T09:39:12Z
date_updated: 2022-01-06T06:53:29Z
department:
- _id: '563'
doi: 10.1016/j.procir.2020.02.244
issue: '91'
language:
- iso: eng
page: 851-857
publication: Procedia CIRP
publication_identifier:
issn:
- 2212-8271
publication_status: published
quality_controlled: '1'
status: public
title: Framework and Functionality Patterns for Smart Service Innovation
type: journal_article
user_id: '77201'
year: '2020'
...
---
_id: '16931'
article_type: original
author:
- first_name: Hongqiang
full_name: Zhou, Hongqiang
last_name: Zhou
- first_name: Basudeb
full_name: Sain, Basudeb
last_name: Sain
- first_name: Yongtian
full_name: Wang, Yongtian
last_name: Wang
- first_name: Christian
full_name: Schlickriede, Christian
id: '59792'
last_name: Schlickriede
- first_name: Ruizhe
full_name: Zhao, Ruizhe
last_name: Zhao
- first_name: Xue
full_name: Zhang, Xue
last_name: Zhang
- first_name: Qunshuo
full_name: Wei, Qunshuo
last_name: Wei
- first_name: Xiaowei
full_name: Li, Xiaowei
last_name: Li
- first_name: Lingling
full_name: Huang, Lingling
last_name: Huang
- first_name: Thomas
full_name: Zentgraf, Thomas
id: '30525'
last_name: Zentgraf
orcid: 0000-0002-8662-1101
citation:
ama: Zhou H, Sain B, Wang Y, et al. Polarization-Encrypted Orbital Angular Momentum
Multiplexed Metasurface Holography. ACS Nano. 2020;14(5):5553–5559. doi:10.1021/acsnano.9b09814
apa: Zhou, H., Sain, B., Wang, Y., Schlickriede, C., Zhao, R., Zhang, X., … Zentgraf,
T. (2020). Polarization-Encrypted Orbital Angular Momentum Multiplexed Metasurface
Holography. ACS Nano, 14(5), 5553–5559. https://doi.org/10.1021/acsnano.9b09814
bibtex: '@article{Zhou_Sain_Wang_Schlickriede_Zhao_Zhang_Wei_Li_Huang_Zentgraf_2020,
title={Polarization-Encrypted Orbital Angular Momentum Multiplexed Metasurface
Holography}, volume={14}, DOI={10.1021/acsnano.9b09814},
number={5}, journal={ACS Nano}, author={Zhou, Hongqiang and Sain, Basudeb and
Wang, Yongtian and Schlickriede, Christian and Zhao, Ruizhe and Zhang, Xue and
Wei, Qunshuo and Li, Xiaowei and Huang, Lingling and Zentgraf, Thomas}, year={2020},
pages={5553–5559} }'
chicago: 'Zhou, Hongqiang, Basudeb Sain, Yongtian Wang, Christian Schlickriede,
Ruizhe Zhao, Xue Zhang, Qunshuo Wei, Xiaowei Li, Lingling Huang, and Thomas Zentgraf.
“Polarization-Encrypted Orbital Angular Momentum Multiplexed Metasurface Holography.”
ACS Nano 14, no. 5 (2020): 5553–5559. https://doi.org/10.1021/acsnano.9b09814.'
ieee: H. Zhou et al., “Polarization-Encrypted Orbital Angular Momentum Multiplexed
Metasurface Holography,” ACS Nano, vol. 14, no. 5, pp. 5553–5559, 2020.
mla: Zhou, Hongqiang, et al. “Polarization-Encrypted Orbital Angular Momentum Multiplexed
Metasurface Holography.” ACS Nano, vol. 14, no. 5, 2020, pp. 5553–5559,
doi:10.1021/acsnano.9b09814.
short: H. Zhou, B. Sain, Y. Wang, C. Schlickriede, R. Zhao, X. Zhang, Q. Wei, X.
Li, L. Huang, T. Zentgraf, ACS Nano 14 (2020) 5553–5559.
date_created: 2020-04-30T11:44:33Z
date_updated: 2022-01-06T06:52:59Z
department:
- _id: '15'
- _id: '230'
- _id: '289'
- _id: '623'
doi: 10.1021/acsnano.9b09814
intvolume: ' 14'
issue: '5'
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
page: 5553–5559
publication: ACS Nano
publication_identifier:
issn:
- 1936-0851
- 1936-086X
publication_status: published
quality_controlled: '1'
status: public
title: Polarization-Encrypted Orbital Angular Momentum Multiplexed Metasurface Holography
type: journal_article
user_id: '30525'
volume: 14
year: '2020'
...
---
_id: '16944'
article_type: original
author:
- first_name: Christian
full_name: Schlickriede, Christian
id: '59792'
last_name: Schlickriede
- first_name: Sergey S.
full_name: Kruk, Sergey S.
last_name: Kruk
- first_name: Lei
full_name: Wang, Lei
last_name: Wang
- first_name: Basudeb
full_name: Sain, Basudeb
last_name: Sain
- first_name: Yuri
full_name: Kivshar, Yuri
last_name: Kivshar
- first_name: Thomas
full_name: Zentgraf, Thomas
id: '30525'
last_name: Zentgraf
orcid: 0000-0002-8662-1101
citation:
ama: Schlickriede C, Kruk SS, Wang L, Sain B, Kivshar Y, Zentgraf T. Nonlinear imaging
with all-dielectric metasurfaces. Nano Letters. 2020;20(6):4370–4376. doi:10.1021/acs.nanolett.0c01105
apa: Schlickriede, C., Kruk, S. S., Wang, L., Sain, B., Kivshar, Y., & Zentgraf,
T. (2020). Nonlinear imaging with all-dielectric metasurfaces. Nano Letters,
20(6), 4370–4376. https://doi.org/10.1021/acs.nanolett.0c01105
bibtex: '@article{Schlickriede_Kruk_Wang_Sain_Kivshar_Zentgraf_2020, title={Nonlinear
imaging with all-dielectric metasurfaces}, volume={20}, DOI={10.1021/acs.nanolett.0c01105},
number={6}, journal={Nano Letters}, author={Schlickriede, Christian and Kruk,
Sergey S. and Wang, Lei and Sain, Basudeb and Kivshar, Yuri and Zentgraf, Thomas},
year={2020}, pages={4370–4376} }'
chicago: 'Schlickriede, Christian, Sergey S. Kruk, Lei Wang, Basudeb Sain, Yuri
Kivshar, and Thomas Zentgraf. “Nonlinear Imaging with All-Dielectric Metasurfaces.”
Nano Letters 20, no. 6 (2020): 4370–4376. https://doi.org/10.1021/acs.nanolett.0c01105.'
ieee: C. Schlickriede, S. S. Kruk, L. Wang, B. Sain, Y. Kivshar, and T. Zentgraf,
“Nonlinear imaging with all-dielectric metasurfaces,” Nano Letters, vol.
20, no. 6, pp. 4370–4376, 2020.
mla: Schlickriede, Christian, et al. “Nonlinear Imaging with All-Dielectric Metasurfaces.”
Nano Letters, vol. 20, no. 6, 2020, pp. 4370–4376, doi:10.1021/acs.nanolett.0c01105.
short: C. Schlickriede, S.S. Kruk, L. Wang, B. Sain, Y. Kivshar, T. Zentgraf, Nano
Letters 20 (2020) 4370–4376.
date_created: 2020-05-08T08:08:59Z
date_updated: 2022-01-06T06:52:59Z
department:
- _id: '15'
- _id: '230'
- _id: '289'
- _id: '623'
doi: 10.1021/acs.nanolett.0c01105
intvolume: ' 20'
issue: '6'
language:
- iso: eng
page: 4370–4376
project:
- _id: '53'
name: TRR 142
- _id: '56'
name: TRR 142 - Project Area C
- _id: '75'
name: TRR 142 - Subproject C5
publication: Nano Letters
publication_identifier:
issn:
- 1530-6984
- 1530-6992
publication_status: published
quality_controlled: '1'
status: public
title: Nonlinear imaging with all-dielectric metasurfaces
type: journal_article
user_id: '30525'
volume: 20
year: '2020'
...
---
_id: '15480'
abstract:
- lang: eng
text: The nonlinear processes of frequency conversion such as second harmonic
generation (SHG) usually obey certain selection rules, resulting from the preservation
of different kinds of physical quantities, e.g. the angular momentum. For the
SHG created by a monolayer of transition-metal dichalcogenides (TMDCs) such as
WS2, the valley-exciton locked selection rule predicts an
SHG signal in the cross-polarization state. By combining plasmonic nanostructures
with a monolayer of TMDC, a hybrid metasurface is realized, which affects this
nonlinear process because of an additional polarization conversion process. Here,
we observe that the plasmonic metasurface modifies the light-matter interaction
with the TMDC, resulting in an SHG signal that is co-polarized with respect to
the incident field, which is usually forbidden for the monolayers of TMDC. We
fabricate such hybrid metasurfaces by placing plasmonic nanorods on top of a monolayer
WS2 and study the valley-exciton locked SHG emission from
such system for different parameters, such as wavelength and polarization. Furthermore,
we show the potential of the hybrid metasurface for tailoring nonlinear processes
by adding additional phase information to the SHG signal using the Pancharatnam-Berry
phase effect. This allows direct tailoring of the SHG emission to the far-field.
author:
- first_name: Florian
full_name: Spreyer, Florian
last_name: Spreyer
- first_name: Ruizhe
full_name: Zhao, Ruizhe
last_name: Zhao
- first_name: Lingling
full_name: Huang, Lingling
last_name: Huang
- first_name: Thomas
full_name: Zentgraf, Thomas
id: '30525'
last_name: Zentgraf
orcid: 0000-0002-8662-1101
citation:
ama: Spreyer F, Zhao R, Huang L, Zentgraf T. Second harmonic imaging of plasmonic
Pancharatnam-Berry phase metasurfaces coupled to monolayers of WS2. Nanophotonics.
2020;9(2):351–360. doi:10.1515/nanoph-2019-0378
apa: Spreyer, F., Zhao, R., Huang, L., & Zentgraf, T. (2020). Second harmonic
imaging of plasmonic Pancharatnam-Berry phase metasurfaces coupled to monolayers
of WS2. Nanophotonics, 9(2), 351–360. https://doi.org/10.1515/nanoph-2019-0378
bibtex: '@article{Spreyer_Zhao_Huang_Zentgraf_2020, title={Second harmonic imaging
of plasmonic Pancharatnam-Berry phase metasurfaces coupled to monolayers of WS2},
volume={9}, DOI={10.1515/nanoph-2019-0378},
number={2}, journal={Nanophotonics}, author={Spreyer, Florian and Zhao, Ruizhe
and Huang, Lingling and Zentgraf, Thomas}, year={2020}, pages={351–360} }'
chicago: 'Spreyer, Florian, Ruizhe Zhao, Lingling Huang, and Thomas Zentgraf. “Second
Harmonic Imaging of Plasmonic Pancharatnam-Berry Phase Metasurfaces Coupled to
Monolayers of WS2.” Nanophotonics 9, no. 2 (2020): 351–360. https://doi.org/10.1515/nanoph-2019-0378.'
ieee: F. Spreyer, R. Zhao, L. Huang, and T. Zentgraf, “Second harmonic imaging of
plasmonic Pancharatnam-Berry phase metasurfaces coupled to monolayers of WS2,”
Nanophotonics, vol. 9, no. 2, pp. 351–360, 2020.
mla: Spreyer, Florian, et al. “Second Harmonic Imaging of Plasmonic Pancharatnam-Berry
Phase Metasurfaces Coupled to Monolayers of WS2.” Nanophotonics, vol. 9,
no. 2, 2020, pp. 351–360, doi:10.1515/nanoph-2019-0378.
short: F. Spreyer, R. Zhao, L. Huang, T. Zentgraf, Nanophotonics 9 (2020) 351–360.
date_created: 2020-01-09T14:08:43Z
date_updated: 2022-01-06T06:52:27Z
ddc:
- '530'
department:
- _id: '15'
- _id: '230'
- _id: '289'
doi: 10.1515/nanoph-2019-0378
file:
- access_level: closed
content_type: application/pdf
creator: zentgraf
date_created: 2020-01-09T14:11:06Z
date_updated: 2020-01-09T14:11:06Z
file_id: '15481'
file_name: Nanophotonics_Spreyer_2020.pdf
file_size: 4075031
relation: main_file
success: 1
file_date_updated: 2020-01-09T14:11:06Z
has_accepted_license: '1'
intvolume: ' 9'
issue: '2'
language:
- iso: eng
license: https://creativecommons.org/licenses/by/4.0/
page: 351–360
publication: Nanophotonics
publication_identifier:
issn:
- 2192-8614
publication_status: published
quality_controlled: '1'
status: public
title: Second harmonic imaging of plasmonic Pancharatnam-Berry phase metasurfaces
coupled to monolayers of WS2
type: journal_article
user_id: '30525'
volume: 9
year: '2020'
...
---
_id: '16197'
abstract:
- lang: eng
text: Nonlinear Pancharatnam–Berry phase metasurfaces facilitate the nontrivial
phase modulation for frequency conversion processes by leveraging photon‐spin
dependent nonlinear geometric‐phases. However, plasmonic metasurfaces show some
severe limitation for nonlinear frequency conversion due to the intrinsic high
ohmic loss and low damage threshold of plasmonic nanostructures. Here, the nonlinear
geometric‐phases associated with the third‐harmonic generation process occurring
in all‐dielectric metasurfaces is studied systematically, which are composed of
silicon nanofins with different in‐plane rotational symmetries. It is found that
the wave coupling among different field components of the resonant fundamental
field gives rise to the appearance of different nonlinear geometric‐phases of
the generated third‐harmonic signals. The experimental observations of the nonlinear
beam steering and nonlinear holography realized in this work by all‐dielectric
geometric‐phase metasurfaces are well explained with the developed theory. This
work offers a new physical picture to understand the nonlinear optical process
occurring at nanoscale dielectric resonators and will help in the design of nonlinear
metasurfaces with tailored phase properties.
article_number: '1902050'
article_type: original
author:
- first_name: Bingyi
full_name: Liu, Bingyi
last_name: Liu
- first_name: Basudeb
full_name: Sain, Basudeb
last_name: Sain
- first_name: Bernhard
full_name: Reineke, Bernhard
last_name: Reineke
- first_name: Ruizhe
full_name: Zhao, Ruizhe
last_name: Zhao
- first_name: Cedrik
full_name: Meier, Cedrik
id: '20798'
last_name: Meier
orcid: https://orcid.org/0000-0002-3787-3572
- first_name: Lingling
full_name: Huang, Lingling
last_name: Huang
- first_name: Yongyuan
full_name: Jiang, Yongyuan
last_name: Jiang
- first_name: Thomas
full_name: Zentgraf, Thomas
id: '30525'
last_name: Zentgraf
orcid: 0000-0002-8662-1101
citation:
ama: 'Liu B, Sain B, Reineke B, et al. Nonlinear Wavefront Control by Geometric-Phase
Dielectric Metasurfaces: Influence of Mode Field and Rotational Symmetry. Advanced
Optical Materials. 2020;8(9). doi:10.1002/adom.201902050'
apa: 'Liu, B., Sain, B., Reineke, B., Zhao, R., Meier, C., Huang, L., … Zentgraf,
T. (2020). Nonlinear Wavefront Control by Geometric-Phase Dielectric Metasurfaces:
Influence of Mode Field and Rotational Symmetry. Advanced Optical Materials,
8(9). https://doi.org/10.1002/adom.201902050'
bibtex: '@article{Liu_Sain_Reineke_Zhao_Meier_Huang_Jiang_Zentgraf_2020, title={Nonlinear
Wavefront Control by Geometric-Phase Dielectric Metasurfaces: Influence of Mode
Field and Rotational Symmetry}, volume={8}, DOI={10.1002/adom.201902050},
number={91902050}, journal={Advanced Optical Materials}, publisher={Wiley}, author={Liu,
Bingyi and Sain, Basudeb and Reineke, Bernhard and Zhao, Ruizhe and Meier, Cedrik
and Huang, Lingling and Jiang, Yongyuan and Zentgraf, Thomas}, year={2020} }'
chicago: 'Liu, Bingyi, Basudeb Sain, Bernhard Reineke, Ruizhe Zhao, Cedrik Meier,
Lingling Huang, Yongyuan Jiang, and Thomas Zentgraf. “Nonlinear Wavefront Control
by Geometric-Phase Dielectric Metasurfaces: Influence of Mode Field and Rotational
Symmetry.” Advanced Optical Materials 8, no. 9 (2020). https://doi.org/10.1002/adom.201902050.'
ieee: 'B. Liu et al., “Nonlinear Wavefront Control by Geometric-Phase Dielectric
Metasurfaces: Influence of Mode Field and Rotational Symmetry,” Advanced Optical
Materials, vol. 8, no. 9, 2020.'
mla: 'Liu, Bingyi, et al. “Nonlinear Wavefront Control by Geometric-Phase Dielectric
Metasurfaces: Influence of Mode Field and Rotational Symmetry.” Advanced Optical
Materials, vol. 8, no. 9, 1902050, Wiley, 2020, doi:10.1002/adom.201902050.'
short: B. Liu, B. Sain, B. Reineke, R. Zhao, C. Meier, L. Huang, Y. Jiang, T. Zentgraf,
Advanced Optical Materials 8 (2020).
date_created: 2020-02-28T17:29:17Z
date_updated: 2022-01-06T06:52:45Z
ddc:
- '530'
department:
- _id: '15'
- _id: '230'
- _id: '289'
doi: 10.1002/adom.201902050
file:
- access_level: closed
content_type: application/pdf
creator: zentgraf
date_created: 2020-02-28T17:37:38Z
date_updated: 2020-02-28T17:37:38Z
file_id: '16202'
file_name: adom.201902050.pdf
file_size: 2914923
relation: main_file
success: 1
file_date_updated: 2020-02-28T17:37:38Z
has_accepted_license: '1'
intvolume: ' 8'
issue: '9'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://onlinelibrary.wiley.com/doi/full/10.1002/adom.201902050
oa: '1'
project:
- _id: '53'
name: TRR 142
- _id: '56'
name: TRR 142 - Project Area C
- _id: '75'
name: TRR 142 - Subproject C5
publication: Advanced Optical Materials
publication_identifier:
issn:
- 2195-1071
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: 'Nonlinear Wavefront Control by Geometric-Phase Dielectric Metasurfaces: Influence
of Mode Field and Rotational Symmetry'
type: journal_article
user_id: '30525'
volume: 8
year: '2020'
...
---
_id: '16285'
abstract:
- lang: eng
text: To decide in which part of town to open stores, high street retailers
consult statistical data on customers and cities, but they cannot analyze their
customers’ shopping behavior and geospatial features of a city due to missing
data. While previous research has proposed recommendation systems and
decision aids that address this type of decision problem – including factory
location and assortment planning – there currently is no design knowledge
available to prescribe the design of city center area recommendation systems
(CCARS). We set out to design a software prototype considering local
customers’ shopping interests and geospatial data on their shopping trips for
retail site selection. With real data on 500 customers and 1,100 shopping trips,
we demonstrate and evaluate our IT artifact. Our results illustrate how retailers
and public town center managers can use CCARS for spatial location selection,
growing retailers’ profits and a city center’s attractiveness for its citizens.
author:
- first_name: Philipp
full_name: zur Heiden, Philipp
id: '64394'
last_name: zur Heiden
- first_name: Carsten Ingo
full_name: Berendes, Carsten Ingo
id: '53344'
last_name: Berendes
- first_name: Daniel
full_name: Beverungen, Daniel
id: '59677'
last_name: Beverungen
citation:
ama: 'zur Heiden P, Berendes CI, Beverungen D. Designing City Center Area Recommendation
Systems . In: Proceedings of the 15th International Conference on Wirtschaftsinformatik.
Potsdam; 2020. doi:doi.org/10.30844/wi_2020_e1-heiden'
apa: zur Heiden, P., Berendes, C. I., & Beverungen, D. (2020). Designing City
Center Area Recommendation Systems . In Proceedings of the 15th International
Conference on Wirtschaftsinformatik. Potsdam. https://doi.org/doi.org/10.30844/wi_2020_e1-heiden
bibtex: '@inproceedings{zur Heiden_Berendes_Beverungen_2020, place={Potsdam}, title={Designing
City Center Area Recommendation Systems }, DOI={doi.org/10.30844/wi_2020_e1-heiden},
booktitle={Proceedings of the 15th International Conference on Wirtschaftsinformatik},
author={zur Heiden, Philipp and Berendes, Carsten Ingo and Beverungen, Daniel},
year={2020} }'
chicago: Heiden, Philipp zur, Carsten Ingo Berendes, and Daniel Beverungen. “Designing
City Center Area Recommendation Systems .” In Proceedings of the 15th International
Conference on Wirtschaftsinformatik. Potsdam, 2020. https://doi.org/doi.org/10.30844/wi_2020_e1-heiden.
ieee: P. zur Heiden, C. I. Berendes, and D. Beverungen, “Designing City Center Area
Recommendation Systems ,” in Proceedings of the 15th International Conference
on Wirtschaftsinformatik, Potsdam, 2020.
mla: zur Heiden, Philipp, et al. “Designing City Center Area Recommendation Systems
.” Proceedings of the 15th International Conference on Wirtschaftsinformatik,
2020, doi:doi.org/10.30844/wi_2020_e1-heiden.
short: 'P. zur Heiden, C.I. Berendes, D. Beverungen, in: Proceedings of the 15th
International Conference on Wirtschaftsinformatik, Potsdam, 2020.'
conference:
end_date: 2020-03-11
location: Potsdam
name: 15th International Conference on Wirtschaftsinformatik
start_date: 2020-03-07
date_created: 2020-03-13T07:05:24Z
date_updated: 2022-01-06T06:52:48Z
ddc:
- '000'
department:
- _id: '526'
doi: doi.org/10.30844/wi_2020_e1-heiden
file:
- access_level: closed
content_type: application/pdf
creator: pzh
date_created: 2020-03-13T06:58:54Z
date_updated: 2020-03-13T06:58:54Z
file_id: '16286'
file_name: E1_City_recommendations_Master_final.pdf
file_size: 1370273
relation: main_file
success: 1
file_date_updated: 2020-03-13T06:58:54Z
has_accepted_license: '1'
keyword:
- Town Center Management
- High Street Retail
- Recommender Systems
- Geospatial Recommendations
- Design Science Research
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://library.gito.de/open-access-pdf/E1_City_recommendations_Master_final.pdf
oa: '1'
place: Potsdam
project:
- _id: '35'
grant_number: 02K15A073
name: Interaktive Einkaufserlebnisse in Innenstädten durch digitale Dienstleistungen
publication: Proceedings of the 15th International Conference on Wirtschaftsinformatik
publication_status: published
quality_controlled: '1'
status: public
title: 'Designing City Center Area Recommendation Systems '
type: conference
user_id: '64394'
year: '2020'
...
---
_id: '13108'
abstract:
- lang: ger
text: Diagrammatisches Schlie{\ss}en wird im Zusammenhang mit dem Lernen von Mathmematik
und ihrer Symbolsprache als wesentliche Theorie der Wissenskonstruktion diskutiert.
Dabei wird h{\"{a}}ufig davon ausgegangen, dass die Wissenskonstruktion im Sinne
diagrammatischen Schlie{\ss}ens erfolgt. Deskriptive Rekonstruktionen diagrammatischen
Schlie{\ss}ens bei Lernenden stellen jedoch ein Desiderat der mathematikdidaktischen
Forschung dar. Der vorliegende Beitrag befasst sich mit der Fragestellung, wie
sich diagrammatisches Schlie{\ss}en bei Lernenden rekonstruieren l{\"{a}}sst.
Als m{\"{o}}gliche Werkzeuge f{\"{u}}r eine solche Rekonstruktion werden Toulmins
Argumentationsschema und Vergnauds Schema-Begriff exemplarisch angewandt, um das
diagrammatische Schlie{\ss}en eines Sch{\"{u}}lerpaars beim Einstieg in die Subtraktion
negativer Zahlen zu rekonstruieren. Abschlie{\ss}end wird die tats{\"{a}}chliche
Eignung der beiden Ans{\"{a}}tze zur Rekonstruktion diagrammatischen Schlie{\ss}ens
diskutiert.
author:
- first_name: Jan
full_name: Schumacher, Jan
id: '26809'
last_name: Schumacher
orcid: 0000-0002-6676-9774
- first_name: Sebastian
full_name: Rezat, Sebastian
last_name: Rezat
citation:
ama: 'Schumacher J, Rezat S. Rekonstruktion diagrammatischen Schließens beim Erlernen
der Subtraktion negativer Zahlen. Vergleich zweier methodischer Zugänge. In: Kadunz
G, ed. Zeichen und Sprache im Mathematikunterricht. Springer; 2020. doi:10.1007/978-3-662-61194-4_5'
apa: Schumacher, J., & Rezat, S. (2020). Rekonstruktion diagrammatischen Schließens
beim Erlernen der Subtraktion negativer Zahlen. Vergleich zweier methodischer
Zugänge. In G. Kadunz (Ed.), Zeichen und Sprache im Mathematikunterricht.
Springer. https://doi.org/10.1007/978-3-662-61194-4_5
bibtex: '@inbook{Schumacher_Rezat_2020, title={Rekonstruktion diagrammatischen Schließens
beim Erlernen der Subtraktion negativer Zahlen. Vergleich zweier methodischer
Zugänge}, DOI={10.1007/978-3-662-61194-4_5},
booktitle={Zeichen und Sprache im Mathematikunterricht}, publisher={Springer},
author={Schumacher, Jan and Rezat, Sebastian}, editor={Kadunz, GertEditor}, year={2020}
}'
chicago: Schumacher, Jan, and Sebastian Rezat. “Rekonstruktion diagrammatischen
Schließens beim Erlernen der Subtraktion negativer Zahlen. Vergleich zweier methodischer
Zugänge.” In Zeichen und Sprache im Mathematikunterricht, edited by Gert
Kadunz. Springer, 2020. https://doi.org/10.1007/978-3-662-61194-4_5.
ieee: J. Schumacher and S. Rezat, “Rekonstruktion diagrammatischen Schließens beim
Erlernen der Subtraktion negativer Zahlen. Vergleich zweier methodischer Zugänge,”
in Zeichen und Sprache im Mathematikunterricht, G. Kadunz, Ed. Springer,
2020.
mla: Schumacher, Jan, and Sebastian Rezat. “Rekonstruktion diagrammatischen Schließens
beim Erlernen der Subtraktion negativer Zahlen. Vergleich zweier methodischer
Zugänge.” Zeichen und Sprache im Mathematikunterricht, edited by Gert Kadunz,
Springer, 2020, doi:10.1007/978-3-662-61194-4_5.
short: 'J. Schumacher, S. Rezat, in: G. Kadunz (Ed.), Zeichen und Sprache im Mathematikunterricht,
Springer, 2020.'
date_created: 2019-08-30T12:00:51Z
date_updated: 2022-01-06T06:51:28Z
department:
- _id: '360'
- _id: '98'
doi: 10.1007/978-3-662-61194-4_5
editor:
- first_name: Gert
full_name: Kadunz, Gert
last_name: Kadunz
language:
- iso: ger
publication: Zeichen und Sprache im Mathematikunterricht
publication_status: published
publisher: Springer
quality_controlled: '1'
status: public
title: Rekonstruktion diagrammatischen Schließens beim Erlernen der Subtraktion negativer
Zahlen. Vergleich zweier methodischer Zugänge
type: book_chapter
user_id: '26809'
year: '2020'
...
---
_id: '30096'
author:
- first_name: Elena
full_name: Ficara, Elena
id: '35768'
last_name: Ficara
- first_name: 'Franca '
full_name: 'd''Agostini, Franca '
last_name: d'Agostini
citation:
ama: Ficara E, d’Agostini F. The Blushing Liar . Philosophia . 2020;21(2):252-266.
apa: Ficara, E., & d’Agostini, F. (2020). The Blushing Liar . Philosophia
, 21(2), 252–266.
bibtex: '@article{Ficara_d’Agostini_2020, title={The Blushing Liar }, volume={21},
number={2}, journal={Philosophia }, author={Ficara, Elena and d’Agostini, Franca
}, year={2020}, pages={252–266} }'
chicago: 'Ficara, Elena, and Franca d’Agostini. “The Blushing Liar .” Philosophia
21, no. 2 (2020): 252–66.'
ieee: E. Ficara and F. d’Agostini, “The Blushing Liar ,” Philosophia , vol.
21, no. 2, pp. 252–266, 2020.
mla: Ficara, Elena, and Franca d’Agostini. “The Blushing Liar .” Philosophia
, vol. 21, no. 2, 2020, pp. 252–66.
short: E. Ficara, F. d’Agostini, Philosophia 21 (2020) 252–266.
date_created: 2022-02-24T20:40:59Z
date_updated: 2022-03-01T12:06:36Z
intvolume: ' 21'
issue: '2'
language:
- iso: eng
page: 252 - 266
publication: 'Philosophia '
quality_controlled: '1'
status: public
title: 'The Blushing Liar '
type: journal_article
user_id: '35768'
volume: 21
year: '2020'
...
---
_id: '30095'
author:
- first_name: Elena
full_name: Ficara, Elena
id: '35768'
last_name: Ficara
citation:
ama: 'Ficara E. Truth and Incompatibility. In: Bouché G, ed. Reading Brandom.
On A Spirit of Trust. Routledge; 2020:29-40.'
apa: Ficara, E. (2020). Truth and Incompatibility. In G. Bouché (Ed.), Reading
Brandom. On A Spirit of Trust (pp. 29–40). Routledge.
bibtex: '@inbook{Ficara_2020, place={London}, title={Truth and Incompatibility},
booktitle={Reading Brandom. On A Spirit of Trust}, publisher={Routledge}, author={Ficara,
Elena}, editor={Bouché, Gilles}, year={2020}, pages={29–40} }'
chicago: 'Ficara, Elena. “Truth and Incompatibility.” In Reading Brandom. On
A Spirit of Trust, edited by Gilles Bouché, 29–40. London: Routledge, 2020.'
ieee: 'E. Ficara, “Truth and Incompatibility,” in Reading Brandom. On A Spirit
of Trust, G. Bouché, Ed. London: Routledge, 2020, pp. 29–40.'
mla: Ficara, Elena. “Truth and Incompatibility.” Reading Brandom. On A Spirit
of Trust, edited by Gilles Bouché, Routledge, 2020, pp. 29–40.
short: 'E. Ficara, in: G. Bouché (Ed.), Reading Brandom. On A Spirit of Trust, Routledge,
London, 2020, pp. 29–40.'
date_created: 2022-02-24T20:36:58Z
date_updated: 2022-03-01T12:06:41Z
editor:
- first_name: Gilles
full_name: Bouché, Gilles
last_name: Bouché
language:
- iso: eng
page: 29 - 40
place: London
publication: Reading Brandom. On A Spirit of Trust
publisher: Routledge
quality_controlled: '1'
status: public
title: Truth and Incompatibility
type: book_chapter
user_id: '35768'
year: '2020'
...
---
_id: '20354'
alternative_title:
- Vernetzte Fertigung
author:
- first_name: Sebastian
full_name: Wiesenmayer, Sebastian
last_name: Wiesenmayer
- first_name: Per
full_name: Heyser, Per
id: '40450'
last_name: Heyser
- first_name: Thomas
full_name: Nehls, Thomas
last_name: Nehls
- first_name: Philipp
full_name: Frey, Philipp
last_name: Frey
- first_name: Wilko
full_name: Flügge, Wilko
last_name: Flügge
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Marion
full_name: Merklein, Marion
last_name: Merklein
citation:
ama: Wiesenmayer S, Heyser P, Nehls T, et al. Berücksichtigung der Herstellungshistorie
von Blechbauteilen beim Fügen durch Umformen. Werkstattstechnik Online.
2020;110(10):677-683. doi:http://dx.doi.org/10.37544/1436-4980-2020-10-33
apa: Wiesenmayer, S., Heyser, P., Nehls, T., Frey, P., Flügge, W., Meschut, G.,
& Merklein, M. (2020). Berücksichtigung der Herstellungshistorie von Blechbauteilen
beim Fügen durch Umformen. Werkstattstechnik Online, 110(10), 677–683.
http://dx.doi.org/10.37544/1436-4980-2020-10-33
bibtex: '@article{Wiesenmayer_Heyser_Nehls_Frey_Flügge_Meschut_Merklein_2020, title={Berücksichtigung
der Herstellungshistorie von Blechbauteilen beim Fügen durch Umformen}, volume={110},
DOI={http://dx.doi.org/10.37544/1436-4980-2020-10-33},
number={10}, journal={Werkstattstechnik Online}, publisher={Springer-VDI-Verlag
GmbH & Co. KG}, author={Wiesenmayer, Sebastian and Heyser, Per and Nehls,
Thomas and Frey, Philipp and Flügge, Wilko and Meschut, Gerson and Merklein, Marion},
year={2020}, pages={677–683} }'
chicago: 'Wiesenmayer, Sebastian, Per Heyser, Thomas Nehls, Philipp Frey, Wilko
Flügge, Gerson Meschut, and Marion Merklein. “Berücksichtigung der Herstellungshistorie
von Blechbauteilen beim Fügen durch Umformen.” Werkstattstechnik Online
110, no. 10 (2020): 677–83. http://dx.doi.org/10.37544/1436-4980-2020-10-33.'
ieee: 'S. Wiesenmayer et al., “Berücksichtigung der Herstellungshistorie
von Blechbauteilen beim Fügen durch Umformen,” Werkstattstechnik Online,
vol. 110, no. 10, pp. 677–683, 2020, doi: http://dx.doi.org/10.37544/1436-4980-2020-10-33.'
mla: Wiesenmayer, Sebastian, et al. “Berücksichtigung der Herstellungshistorie von
Blechbauteilen beim Fügen durch Umformen.” Werkstattstechnik Online, vol.
110, no. 10, Springer-VDI-Verlag GmbH & Co. KG, 2020, pp. 677–83, doi:http://dx.doi.org/10.37544/1436-4980-2020-10-33.
short: S. Wiesenmayer, P. Heyser, T. Nehls, P. Frey, W. Flügge, G. Meschut, M. Merklein,
Werkstattstechnik Online 110 (2020) 677–683.
date_created: 2020-11-13T14:19:55Z
date_updated: 2022-03-10T12:15:28Z
department:
- _id: '157'
doi: http://dx.doi.org/10.37544/1436-4980-2020-10-33
intvolume: ' 110'
issue: '10'
language:
- iso: ger
page: 677-683
publication: Werkstattstechnik Online
publisher: Springer-VDI-Verlag GmbH & Co. KG
quality_controlled: '1'
status: public
title: Berücksichtigung der Herstellungshistorie von Blechbauteilen beim Fügen durch
Umformen
type: journal_article
user_id: '40450'
volume: 110
year: '2020'
...
---
_id: '24452'
citation:
ama: Alemann v. A, Gruhlich J, Horwath I, Weber L, eds. The Digitalization of
Labour from a Gender Perspective.; 2020.
apa: The Digitalization of Labour from a Gender Perspective. (2020). In v. A. Alemann,
J. Gruhlich, I. Horwath, & L. Weber (Eds.), Gender and Research.
bibtex: '@book{Alemann_Gruhlich_Horwath_Weber_2020, title={The Digitalization of
Labour from a Gender Perspective}, journal={Gender and Research}, year={2020}
}'
chicago: Alemann, v.Annette, Julia Gruhlich, Ilona Horwath, and Lena Weber, eds.
The Digitalization of Labour from a Gender Perspective. Gender and Research,
2020.
ieee: v. A. Alemann, J. Gruhlich, I. Horwath, and L. Weber, Eds., The Digitalization
of Labour from a Gender Perspective. 2020.
mla: Alemann, v. Annette, et al., editors. “The Digitalization of Labour from a
Gender Perspective.” Gender and Research, 2020.
short: v. A. Alemann, J. Gruhlich, I. Horwath, L. Weber, eds., The Digitalization
of Labour from a Gender Perspective, 2020.
date_created: 2021-09-14T20:46:38Z
date_updated: 2022-04-21T11:18:19Z
ddc:
- '300'
department:
- _id: '603'
editor:
- first_name: v.Annette
full_name: Alemann, v.Annette
last_name: Alemann
- first_name: Julia
full_name: Gruhlich, Julia
last_name: Gruhlich
- first_name: Ilona
full_name: Horwath, Ilona
last_name: Horwath
- first_name: Lena
full_name: Weber, Lena
last_name: Weber
file:
- access_level: closed
content_type: application/pdf
creator: innem
date_created: 2021-09-14T20:46:13Z
date_updated: 2021-09-14T20:46:13Z
file_id: '24453'
file_name: The digitalization of labour_2020.pdf
file_size: 1252865
relation: main_file
success: 1
file_date_updated: 2021-09-14T20:46:13Z
has_accepted_license: '1'
language:
- iso: eng
publication: Gender and Research
quality_controlled: '1'
status: public
title: The Digitalization of Labour from a Gender Perspective
type: journal_editor
user_id: '83744'
year: '2020'
...
---
_id: '20143'
author:
- first_name: Mortaza
full_name: Otroshi, Mortaza
id: '71269'
last_name: Otroshi
orcid: 0000-0002-8652-9209
- first_name: Moritz
full_name: Rossel, Moritz
last_name: Rossel
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: Otroshi M, Rossel M, Meschut G. Stress state dependent damage modeling of self-pierce
riveting process simulation using GISSMO damage model. Journal of Advanced
Joining Processes. 2020;1. doi:10.1016/j.jajp.2020.100015
apa: Otroshi, M., Rossel, M., & Meschut, G. (2020). Stress state dependent damage
modeling of self-pierce riveting process simulation using GISSMO damage model.
Journal of Advanced Joining Processes, 1. https://doi.org/10.1016/j.jajp.2020.100015
bibtex: '@article{Otroshi_Rossel_Meschut_2020, title={Stress state dependent damage
modeling of self-pierce riveting process simulation using GISSMO damage model},
volume={1}, DOI={10.1016/j.jajp.2020.100015},
journal={Journal of Advanced Joining Processes}, publisher={Elsevier}, author={Otroshi,
Mortaza and Rossel, Moritz and Meschut, Gerson}, year={2020} }'
chicago: Otroshi, Mortaza, Moritz Rossel, and Gerson Meschut. “Stress State Dependent
Damage Modeling of Self-Pierce Riveting Process Simulation Using GISSMO Damage
Model.” Journal of Advanced Joining Processes 1 (2020). https://doi.org/10.1016/j.jajp.2020.100015.
ieee: 'M. Otroshi, M. Rossel, and G. Meschut, “Stress state dependent damage modeling
of self-pierce riveting process simulation using GISSMO damage model,” Journal
of Advanced Joining Processes, vol. 1, 2020, doi: 10.1016/j.jajp.2020.100015.'
mla: Otroshi, Mortaza, et al. “Stress State Dependent Damage Modeling of Self-Pierce
Riveting Process Simulation Using GISSMO Damage Model.” Journal of Advanced
Joining Processes, vol. 1, Elsevier, 2020, doi:10.1016/j.jajp.2020.100015.
short: M. Otroshi, M. Rossel, G. Meschut, Journal of Advanced Joining Processes
1 (2020).
date_created: 2020-10-20T14:49:15Z
date_updated: 2022-04-25T07:49:50Z
department:
- _id: '157'
doi: 10.1016/j.jajp.2020.100015
intvolume: ' 1'
keyword:
- Self-pierce riveting
- Ductile fracture
- Damage modeling
- GISSMO damage model
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
publication: Journal of Advanced Joining Processes
publisher: Elsevier
quality_controlled: '1'
status: public
title: Stress state dependent damage modeling of self-pierce riveting process simulation
using GISSMO damage model
type: journal_article
user_id: '71269'
volume: 1
year: '2020'
...
---
_id: '20119'
citation:
ama: Troschitz J, Vorderbrüggen J, Kupfer R, Gude M, Meschut G, eds. Joining
of Thermoplastic Composites with Metals Using Resistance Element Welding.
MDPI; 2020. doi:10.3390/app10207251
apa: Joining of Thermoplastic Composites with Metals Using Resistance Element Welding.
(2020). In J. Troschitz, J. Vorderbrüggen, R. Kupfer, M. Gude, & G. Meschut
(Eds.), Applied Sciences. MDPI. https://doi.org/10.3390/app10207251
bibtex: '@book{Troschitz_Vorderbrüggen_Kupfer_Gude_Meschut_2020, title={Joining
of Thermoplastic Composites with Metals Using Resistance Element Welding}, DOI={10.3390/app10207251}, journal={Applied
Sciences}, publisher={MDPI}, year={2020} }'
chicago: Troschitz, Juliane, Julian Vorderbrüggen, Robert Kupfer, Maik Gude, and
Gerson Meschut, eds. Joining of Thermoplastic Composites with Metals Using
Resistance Element Welding. Applied Sciences. MDPI, 2020. https://doi.org/10.3390/app10207251.
ieee: J. Troschitz, J. Vorderbrüggen, R. Kupfer, M. Gude, and G. Meschut, Eds.,
Joining of Thermoplastic Composites with Metals Using Resistance Element Welding.
MDPI, 2020.
mla: Troschitz, Juliane, et al., editors. “Joining of Thermoplastic Composites with
Metals Using Resistance Element Welding.” Applied Sciences, MDPI, 2020,
doi:10.3390/app10207251.
short: J. Troschitz, J. Vorderbrüggen, R. Kupfer, M. Gude, G. Meschut, eds., Joining
of Thermoplastic Composites with Metals Using Resistance Element Welding, MDPI,
2020.
date_created: 2020-10-19T07:55:12Z
date_updated: 2022-04-25T14:45:58Z
department:
- _id: '157'
doi: 10.3390/app10207251
editor:
- first_name: Juliane
full_name: Troschitz, Juliane
last_name: Troschitz
- first_name: Julian
full_name: Vorderbrüggen, Julian
id: '36235'
last_name: Vorderbrüggen
- first_name: Robert
full_name: Kupfer, Robert
last_name: Kupfer
- first_name: Maik
full_name: Gude, Maik
last_name: Gude
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
language:
- iso: eng
publication: Applied Sciences
publisher: MDPI
quality_controlled: '1'
status: public
title: Joining of Thermoplastic Composites with Metals Using Resistance Element Welding
type: journal_editor
user_id: '36235'
year: '2020'
...
---
_id: '16930'
author:
- first_name: Steffen Rainer
full_name: Tinkloh, Steffen Rainer
id: '72722'
last_name: Tinkloh
- first_name: Tao
full_name: Wu, Tao
last_name: Wu
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Thomas
full_name: Niendorf, Thomas
last_name: Niendorf
citation:
ama: 'Tinkloh SR, Wu T, Tröster T, Niendorf T. Numerical investigation of the hole-drilling
method applied to intrinsic manufactured metal-CFRP hybrids. In: Proceedings
of the 4th International Conference Hybrid 2020 Materials and Structures.
; 2020.'
apa: Tinkloh, S. R., Wu, T., Tröster, T., & Niendorf, T. (2020). Numerical investigation
of the hole-drilling method applied to intrinsic manufactured metal-CFRP hybrids.
Proceedings of the 4th International Conference Hybrid 2020 Materials and Structures.
4th International Conference Hybrid 2020 Materials and Structures, Web-Conference,
Germany.
bibtex: '@inproceedings{Tinkloh_Wu_Tröster_Niendorf_2020, title={Numerical investigation
of the hole-drilling method applied to intrinsic manufactured metal-CFRP hybrids},
booktitle={Proceedings of the 4th International Conference Hybrid 2020 Materials
and Structures}, author={Tinkloh, Steffen Rainer and Wu, Tao and Tröster, Thomas
and Niendorf, Thomas}, year={2020} }'
chicago: Tinkloh, Steffen Rainer, Tao Wu, Thomas Tröster, and Thomas Niendorf. “Numerical
Investigation of the Hole-Drilling Method Applied to Intrinsic Manufactured Metal-CFRP
Hybrids.” In Proceedings of the 4th International Conference Hybrid 2020 Materials
and Structures, 2020.
ieee: S. R. Tinkloh, T. Wu, T. Tröster, and T. Niendorf, “Numerical investigation
of the hole-drilling method applied to intrinsic manufactured metal-CFRP hybrids,”
presented at the 4th International Conference Hybrid 2020 Materials and Structures,
Web-Conference, Germany, 2020.
mla: Tinkloh, Steffen Rainer, et al. “Numerical Investigation of the Hole-Drilling
Method Applied to Intrinsic Manufactured Metal-CFRP Hybrids.” Proceedings of
the 4th International Conference Hybrid 2020 Materials and Structures, 2020.
short: 'S.R. Tinkloh, T. Wu, T. Tröster, T. Niendorf, in: Proceedings of the 4th
International Conference Hybrid 2020 Materials and Structures, 2020.'
conference:
end_date: 2020-04-29
location: Web-Conference, Germany
name: 4th International Conference Hybrid 2020 Materials and Structures
start_date: 2020-04-28
date_created: 2020-04-30T11:07:09Z
date_updated: 2022-04-26T06:35:24Z
department:
- _id: '321'
- _id: '149'
- _id: '9'
language:
- iso: eng
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
publication: Proceedings of the 4th International Conference Hybrid 2020 Materials
and Structures
quality_controlled: '1'
status: public
title: Numerical investigation of the hole-drilling method applied to intrinsic manufactured
metal-CFRP hybrids
type: conference
user_id: '72722'
year: '2020'
...
---
_id: '20842'
article_number: '143'
article_type: original
author:
- first_name: Tao
full_name: Wu, Tao
last_name: Wu
- first_name: Steffen Rainer
full_name: Tinkloh, Steffen Rainer
id: '72722'
last_name: Tinkloh
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Wolfgang
full_name: Zinn, Wolfgang
last_name: Zinn
- first_name: Thomas
full_name: Niendorf, Thomas
last_name: Niendorf
citation:
ama: Wu T, Tinkloh SR, Tröster T, Zinn W, Niendorf T. Determination and Validation
of Residual Stresses in CFRP/Metal Hybrid Components Using the Incremental Hole
Drilling Method. Journal of Composites Science. Published online 2020.
doi:10.3390/jcs4030143
apa: Wu, T., Tinkloh, S. R., Tröster, T., Zinn, W., & Niendorf, T. (2020). Determination
and Validation of Residual Stresses in CFRP/Metal Hybrid Components Using the
Incremental Hole Drilling Method. Journal of Composites Science, Article
143. https://doi.org/10.3390/jcs4030143
bibtex: '@article{Wu_Tinkloh_Tröster_Zinn_Niendorf_2020, title={Determination and
Validation of Residual Stresses in CFRP/Metal Hybrid Components Using the Incremental
Hole Drilling Method}, DOI={10.3390/jcs4030143},
number={143}, journal={Journal of Composites Science}, author={Wu, Tao and Tinkloh,
Steffen Rainer and Tröster, Thomas and Zinn, Wolfgang and Niendorf, Thomas}, year={2020}
}'
chicago: Wu, Tao, Steffen Rainer Tinkloh, Thomas Tröster, Wolfgang Zinn, and Thomas
Niendorf. “Determination and Validation of Residual Stresses in CFRP/Metal Hybrid
Components Using the Incremental Hole Drilling Method.” Journal of Composites
Science, 2020. https://doi.org/10.3390/jcs4030143.
ieee: 'T. Wu, S. R. Tinkloh, T. Tröster, W. Zinn, and T. Niendorf, “Determination
and Validation of Residual Stresses in CFRP/Metal Hybrid Components Using the
Incremental Hole Drilling Method,” Journal of Composites Science, Art.
no. 143, 2020, doi: 10.3390/jcs4030143.'
mla: Wu, Tao, et al. “Determination and Validation of Residual Stresses in CFRP/Metal
Hybrid Components Using the Incremental Hole Drilling Method.” Journal of Composites
Science, 143, 2020, doi:10.3390/jcs4030143.
short: T. Wu, S.R. Tinkloh, T. Tröster, W. Zinn, T. Niendorf, Journal of Composites
Science (2020).
date_created: 2020-12-25T14:08:35Z
date_updated: 2022-04-26T06:35:08Z
department:
- _id: '149'
- _id: '321'
- _id: '9'
doi: 10.3390/jcs4030143
language:
- iso: eng
publication: Journal of Composites Science
publication_identifier:
issn:
- 2504-477X
publication_status: published
quality_controlled: '1'
status: public
title: Determination and Validation of Residual Stresses in CFRP/Metal Hybrid Components
Using the Incremental Hole Drilling Method
type: journal_article
user_id: '72722'
year: '2020'
...
---
_id: '21294'
author:
- first_name: Ruth
full_name: Hagengruber, Ruth
id: '198'
last_name: Hagengruber
orcid: https://orcid.org/0000-0003-3360-6335
citation:
ama: Hagengruber R. Review Hagengruber Le Ru Émilie Du Châtelet Philosophe . H-France
Net. 2020;158.
apa: Hagengruber, R. (2020). Review Hagengruber Le Ru Émilie Du Châtelet Philosophe
. In H-France Net (Vol. 158).
bibtex: '@article{Hagengruber_2020, title={Review Hagengruber Le Ru Émilie Du Châtelet
Philosophe }, volume={158}, journal={H-France Net}, author={Hagengruber, Ruth},
year={2020} }'
chicago: Hagengruber, Ruth. “Review Hagengruber Le Ru Émilie Du Châtelet Philosophe
.” H-France Net, 2020.
ieee: R. Hagengruber, “Review Hagengruber Le Ru Émilie Du Châtelet Philosophe ,”
H-France Net, vol. 158. 2020.
mla: Hagengruber, Ruth. “Review Hagengruber Le Ru Émilie Du Châtelet Philosophe
.” H-France Net, vol. 158, 2020.
short: R. Hagengruber, H-France Net 158 (2020).
date_created: 2021-02-28T10:07:07Z
date_updated: 2022-11-25T19:16:11Z
department:
- _id: '519'
intvolume: ' 158'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://h-france.net/vol20reviews/vol20no158hagengruber.pdf
oa: '1'
publication: H-France Net
publication_date: Sept 20, 2020
publication_identifier:
issn:
- ISSN 1553-9172
quality_controlled: '1'
status: public
title: 'Review Hagengruber Le Ru Émilie Du Châtelet Philosophe '
type: review
user_id: '49063'
volume: 158
year: '2020'
...
---
_id: '20690'
abstract:
- lang: eng
text: The Enlightenment is well known for its critical analysis of the Bible. Though
the Renaissance sources have been acknowledged as an inspiration of this movement,
the Querelle des Femmes and its critique of the Bible has never been considered
as a possible catalyst for the enlightened philosophical discourse. For centuries
women have fought against interpretations of the Bible.This paper argues that
the Querelle des Femmes criticized the Bible not only because of its patriarchal
content but also criticized philosophical thinking that, for supporting the views
from the Bible and its misogynist stance, misusing the instruments of rational
philosophy. Arguments from 1400-1750, from Nogarola to Du Châtelet proof women
philosophers’ fight in favour of a critique of the bible from a rational point
of view, reflecting also on the status of what it meant, to argue rationally.
author:
- first_name: Ruth
full_name: Hagengruber, Ruth
id: '198'
last_name: Hagengruber
orcid: https://orcid.org/0000-0003-3360-6335
citation:
ama: Hagengruber R. Pressure on Enlightenment. Bible Critics from Nogarola to Du
Châtelet. Dianoia 31, no XXV. Published online 2020:331-353.
apa: Hagengruber, R. (2020). Pressure on Enlightenment. Bible Critics from Nogarola
to Du Châtelet. Dianoia 31, No. XXV, 331–353.
bibtex: '@article{Hagengruber_2020, title={Pressure on Enlightenment. Bible Critics
from Nogarola to Du Châtelet}, journal={Dianoia 31, no. XXV}, author={Hagengruber,
Ruth}, year={2020}, pages={331–353} }'
chicago: Hagengruber, Ruth. “Pressure on Enlightenment. Bible Critics from Nogarola
to Du Châtelet.” Dianoia 31, No. XXV, 2020, 331–53.
ieee: R. Hagengruber, “Pressure on Enlightenment. Bible Critics from Nogarola to
Du Châtelet,” Dianoia 31, no. XXV, pp. 331–353, 2020.
mla: Hagengruber, Ruth. “Pressure on Enlightenment. Bible Critics from Nogarola
to Du Châtelet.” Dianoia 31, No. XXV, 2020, pp. 331–53.
short: R. Hagengruber, Dianoia 31, No. XXV (2020) 331–353.
conference:
location: 'Bologna '
name: Conference European Society of Early Modern Philosophy
date_created: 2020-12-08T15:34:45Z
date_updated: 2022-11-25T20:27:36Z
department:
- _id: '519'
keyword:
- 'Keywords: Bible critics'
- Isotta Nogarola
- Querelle des femmes
- Enlightenment
- Émilie Du Châtelet.
language:
- iso: eng
page: 331-353
publication: Dianoia 31, no. XXV
publication_identifier:
isbn:
- ISBN 978-88-7000-877-7
publication_status: published
quality_controlled: '1'
status: public
title: Pressure on Enlightenment. Bible Critics from Nogarola to Du Châtelet
type: journal_article
user_id: '49063'
year: '2020'
...
---
_id: '34789'
article_type: original
author:
- first_name: Habib
full_name: Amiri, Habib
last_name: Amiri
- first_name: Helge
full_name: Glöckner, Helge
id: '178'
last_name: Glöckner
- first_name: Alexander
full_name: Schmeding, Alexander
last_name: Schmeding
citation:
ama: Amiri H, Glöckner H, Schmeding A. Lie groupoids of mappings taking values in
a Lie groupoid. Archivum Mathematicum. 2020;56(5):307–356. doi:10.5817/AM2020-5-307
apa: Amiri, H., Glöckner, H., & Schmeding, A. (2020). Lie groupoids of mappings
taking values in a Lie groupoid. Archivum Mathematicum, 56(5), 307–356.
https://doi.org/10.5817/AM2020-5-307
bibtex: '@article{Amiri_Glöckner_Schmeding_2020, title={Lie groupoids of mappings
taking values in a Lie groupoid}, volume={56}, DOI={10.5817/AM2020-5-307},
number={5}, journal={Archivum Mathematicum}, author={Amiri, Habib and Glöckner,
Helge and Schmeding, Alexander}, year={2020}, pages={307–356} }'
chicago: 'Amiri, Habib, Helge Glöckner, and Alexander Schmeding. “Lie Groupoids
of Mappings Taking Values in a Lie Groupoid.” Archivum Mathematicum 56,
no. 5 (2020): 307–356. https://doi.org/10.5817/AM2020-5-307.'
ieee: 'H. Amiri, H. Glöckner, and A. Schmeding, “Lie groupoids of mappings taking
values in a Lie groupoid,” Archivum Mathematicum, vol. 56, no. 5, pp. 307–356,
2020, doi: 10.5817/AM2020-5-307.'
mla: Amiri, Habib, et al. “Lie Groupoids of Mappings Taking Values in a Lie Groupoid.”
Archivum Mathematicum, vol. 56, no. 5, 2020, pp. 307–356, doi:10.5817/AM2020-5-307.
short: H. Amiri, H. Glöckner, A. Schmeding, Archivum Mathematicum 56 (2020) 307–356.
date_created: 2022-12-21T19:13:24Z
date_updated: 2022-12-21T19:15:59Z
department:
- _id: '10'
- _id: '87'
- _id: '93'
doi: 10.5817/AM2020-5-307
intvolume: ' 56'
issue: '5'
keyword:
- 22A22
- '22E65'
- '22E67'
- 46T10
- 47H30
- 58D15
- 58H05
language:
- iso: eng
page: 307–356
publication: Archivum Mathematicum
publication_identifier:
issn:
- 0044-8753
quality_controlled: '1'
status: public
title: Lie groupoids of mappings taking values in a Lie groupoid
type: journal_article
user_id: '178'
volume: 56
year: '2020'
...
---
_id: '34787'
article_type: original
author:
- first_name: Helge
full_name: Glöckner, Helge
id: '178'
last_name: Glöckner
- first_name: Niku
full_name: Masbough, Niku
last_name: Masbough
citation:
ama: Glöckner H, Masbough N. Products of regular locally compact spaces are k_R-spaces.
Topology Proceedings. 2020;55:35–38.
apa: Glöckner, H., & Masbough, N. (2020). Products of regular locally compact
spaces are k_R-spaces. Topology Proceedings, 55, 35–38.
bibtex: '@article{Glöckner_Masbough_2020, title={Products of regular locally compact
spaces are k_R-spaces}, volume={55}, journal={Topology Proceedings}, author={Glöckner,
Helge and Masbough, Niku}, year={2020}, pages={35–38} }'
chicago: 'Glöckner, Helge, and Niku Masbough. “Products of Regular Locally Compact
Spaces Are K_R-Spaces.” Topology Proceedings 55 (2020): 35–38.'
ieee: H. Glöckner and N. Masbough, “Products of regular locally compact spaces are
k_R-spaces,” Topology Proceedings, vol. 55, pp. 35–38, 2020.
mla: Glöckner, Helge, and Niku Masbough. “Products of Regular Locally Compact Spaces
Are K_R-Spaces.” Topology Proceedings, vol. 55, 2020, pp. 35–38.
short: H. Glöckner, N. Masbough, Topology Proceedings 55 (2020) 35–38.
date_created: 2022-12-21T19:06:45Z
date_updated: 2022-12-21T20:06:44Z
department:
- _id: '10'
- _id: '87'
- _id: '93'
intvolume: ' 55'
keyword:
- 54B10
- 54D45
- 54D50
language:
- iso: eng
page: 35–38
publication: Topology Proceedings
publication_identifier:
issn:
- 0146-4124
quality_controlled: '1'
status: public
title: Products of regular locally compact spaces are k_R-spaces
type: journal_article
user_id: '178'
volume: 55
year: '2020'
...