---
_id: '22202'
abstract:
- lang: eng
text: Structural parts for aviation have very high demands on the development and
production process. Therefore, the entire process must be considered in order
to produce high-quality AM metal parts. In this case study, a conventional part
was selected to be optimized for AM. The process presented includes component
selection, design improvement with a novel approach for topology optimization
based on the AMendate algorithm as basis of MSC Apex Generative Design,component
production on a SLM 250 HL and post-processing including heat treatment and surface
smoothing. With the topology optimization a weight reduction of ~60 % could be
realized, whereby the stress distribution is more homogeneous. Furthermore, the
challenges of support optimization and post-processing have to be addressed, in
order to produce competitive parts.
author:
- first_name: Sven Helge
full_name: Klippstein, Sven Helge
id: '71545'
last_name: Klippstein
- first_name: Anne
full_name: Duchting, Anne
last_name: Duchting
- first_name: Thomas
full_name: Reiher, Thomas
last_name: Reiher
- first_name: F.
full_name: Hengsbach, F.
last_name: Hengsbach
- first_name: Dennis
full_name: Menge, Dennis
id: '29240'
last_name: Menge
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
orcid: 000-0001-8590-1921
citation:
ama: 'Klippstein SH, Duchting A, Reiher T, Hengsbach F, Menge D, Schmid H-J. Devolopment,
Production and post-processing of a topology optimized aircraft bracket . In:
30th Annual International Solid Freeform Fabrication Symposium. Vol 30.
; 2019:1932-1945.'
apa: Klippstein, S. H., Duchting, A., Reiher, T., Hengsbach, F., Menge, D., &
Schmid, H.-J. (2019). Devolopment, Production and post-processing of a topology
optimized aircraft bracket . 30th Annual International Solid Freeform Fabrication
Symposium, 30, 1932–1945.
bibtex: '@inproceedings{Klippstein_Duchting_Reiher_Hengsbach_Menge_Schmid_2019,
title={Devolopment, Production and post-processing of a topology optimized aircraft
bracket }, volume={30}, booktitle={30th Annual International Solid Freeform Fabrication
Symposium}, author={Klippstein, Sven Helge and Duchting, Anne and Reiher, Thomas
and Hengsbach, F. and Menge, Dennis and Schmid, Hans-Joachim}, year={2019}, pages={1932–1945}
}'
chicago: Klippstein, Sven Helge, Anne Duchting, Thomas Reiher, F. Hengsbach, Dennis
Menge, and Hans-Joachim Schmid. “Devolopment, Production and Post-Processing of
a Topology Optimized Aircraft Bracket .” In 30th Annual International Solid
Freeform Fabrication Symposium, 30:1932–45, 2019.
ieee: S. H. Klippstein, A. Duchting, T. Reiher, F. Hengsbach, D. Menge, and H.-J.
Schmid, “Devolopment, Production and post-processing of a topology optimized aircraft
bracket ,” in 30th Annual International Solid Freeform Fabrication Symposium,
2019, vol. 30, pp. 1932–1945.
mla: Klippstein, Sven Helge, et al. “Devolopment, Production and Post-Processing
of a Topology Optimized Aircraft Bracket .” 30th Annual International Solid
Freeform Fabrication Symposium, vol. 30, 2019, pp. 1932–45.
short: 'S.H. Klippstein, A. Duchting, T. Reiher, F. Hengsbach, D. Menge, H.-J. Schmid,
in: 30th Annual International Solid Freeform Fabrication Symposium, 2019, pp.
1932–1945.'
date_created: 2021-05-14T07:46:35Z
date_updated: 2023-03-27T20:06:22Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
intvolume: ' 30'
language:
- iso: eng
main_file_link:
- url: https://repositories.lib.utexas.edu/bitstream/handle/2152/90529/2019-160-Klippstein.pdf?sequence=2
page: 1932-1945
publication: 30th Annual International Solid Freeform Fabrication Symposium
quality_controlled: '1'
status: public
title: 'Devolopment, Production and post-processing of a topology optimized aircraft
bracket '
type: conference
user_id: '71545'
volume: 30
year: '2019'
...
---
_id: '43185'
abstract:
- lang: ger
text: Der Beitrag skizziert in einem historischen Exkurs zentrale Entwicklungslinien
der beruflichen Benachteiligtenförderung. Es wird deutlich, dass gesellschaftliche
Veränderungen zu einer deutlich kritischeren und pädagogisch reflektierten Sicht
auf berufliche Fördermaßnahmen geführt haben.
article_type: original
author:
- first_name: Dietmar
full_name: Heisler, Dietmar
id: '60285'
last_name: Heisler
citation:
ama: Heisler D. Transformation und Wandel der Beruflichen Integrationsförderung.
Vom „Erfolgsmodell“ zum „Problemfall“. Berufsbildung Zeitschrift für Theorie-Praxis-Dialog.
2019;175.
apa: Heisler, D. (2019). Transformation und Wandel der Beruflichen Integrationsförderung.
Vom „Erfolgsmodell“ zum „Problemfall“. Berufsbildung. Zeitschrift für Theorie-Praxis-Dialog,
175.
bibtex: '@article{Heisler_2019, title={Transformation und Wandel der Beruflichen
Integrationsförderung. Vom „Erfolgsmodell“ zum „Problemfall“.}, volume={175},
journal={Berufsbildung. Zeitschrift für Theorie-Praxis-Dialog}, author={Heisler,
Dietmar}, year={2019} }'
chicago: Heisler, Dietmar. “Transformation und Wandel der Beruflichen Integrationsförderung.
Vom „Erfolgsmodell“ zum „Problemfall“.” Berufsbildung. Zeitschrift für Theorie-Praxis-Dialog
175 (2019).
ieee: D. Heisler, “Transformation und Wandel der Beruflichen Integrationsförderung.
Vom „Erfolgsmodell“ zum „Problemfall“.,” Berufsbildung. Zeitschrift für Theorie-Praxis-Dialog,
vol. 175, 2019.
mla: Heisler, Dietmar. “Transformation und Wandel der Beruflichen Integrationsförderung.
Vom „Erfolgsmodell“ zum „Problemfall“.” Berufsbildung. Zeitschrift für Theorie-Praxis-Dialog,
vol. 175, 2019.
short: D. Heisler, Berufsbildung. Zeitschrift für Theorie-Praxis-Dialog 175 (2019).
date_created: 2023-03-29T15:31:52Z
date_updated: 2023-03-29T15:31:56Z
department:
- _id: '451'
intvolume: ' 175'
keyword:
- Benachteiligtenförderung
- Transformation
language:
- iso: ger
publication: Berufsbildung. Zeitschrift für Theorie-Praxis-Dialog
publication_identifier:
unknown:
- '00059536'
publication_status: published
quality_controlled: '1'
status: public
title: Transformation und Wandel der Beruflichen Integrationsförderung. Vom „Erfolgsmodell“
zum „Problemfall“.
type: journal_article
user_id: '60285'
volume: 175
year: '2019'
...
---
_id: '10014'
abstract:
- lang: eng
text: The cubic, tetragonal, and orthorhombic phase of potassium niobate (KNbO3)
are studied based on density-functional theory. Starting from the relaxed atomic
geometries, we analyze the influence of self-energy corrections on the electronic
band structure within the GW approximation. We find that quasiparticle shifts
widen the direct (indirect) band gap by 1.21 (1.44), 1.58 (1.55), and 1.67 (1.64)
eV for the cubic, tetragonal, and orthorhombic phase, respectively. By solving
the Bethe-Salpeter equation, we obtain the linear dielectric function with excitonic
and local-field effects, which turn out to be essential for good agreement with
experimental data. From our results, we extract an exciton binding energy of 0.6,
0.5, and 0.5 eV for the cubic, tetragonal, and orthorhombic phase, respectively.
Furthermore, we investigate the nonlinear second-harmonic generation (SHG) both
theoretically and experimentally. The frequency-dependent second-order polarization
tensor of orthorhombic KNbO3 is measured for incoming photon energies between
1.2 and 1.6 eV. In addition, calculations within the independent-(quasi)particle
approximation are performed for the tetragonal and orthorhombic phase. The novel
experimental data are in excellent agreement with the quasiparticle calculations
and resolve persistent discrepancies between earlier experimental measurements
and ab initio results reported in the literature.
article_number: '054401'
article_type: original
author:
- first_name: Falko
full_name: Schmidt, Falko
id: '35251'
last_name: Schmidt
orcid: 0000-0002-5071-5528
- first_name: Arthur
full_name: Riefer, Arthur
last_name: Riefer
- first_name: Wolf Gero
full_name: Schmidt, Wolf Gero
id: '468'
last_name: Schmidt
orcid: 0000-0002-2717-5076
- first_name: Arno
full_name: Schindlmayr, Arno
id: '458'
last_name: Schindlmayr
orcid: 0000-0002-4855-071X
- first_name: Mirco
full_name: Imlau, Mirco
last_name: Imlau
- first_name: Florian
full_name: Dobener, Florian
last_name: Dobener
- first_name: Nils
full_name: Mengel, Nils
last_name: Mengel
- first_name: Sangam
full_name: Chatterjee, Sangam
last_name: Chatterjee
- first_name: Simone
full_name: Sanna, Simone
last_name: Sanna
citation:
ama: Schmidt F, Riefer A, Schmidt WG, et al. Quasiparticle and excitonic effects
in the optical response of KNbO3. Physical Review Materials. 2019;3(5).
doi:10.1103/PhysRevMaterials.3.054401
apa: Schmidt, F., Riefer, A., Schmidt, W. G., Schindlmayr, A., Imlau, M., Dobener,
F., Mengel, N., Chatterjee, S., & Sanna, S. (2019). Quasiparticle and excitonic
effects in the optical response of KNbO3. Physical Review Materials, 3(5),
Article 054401. https://doi.org/10.1103/PhysRevMaterials.3.054401
bibtex: '@article{Schmidt_Riefer_Schmidt_Schindlmayr_Imlau_Dobener_Mengel_Chatterjee_Sanna_2019,
title={Quasiparticle and excitonic effects in the optical response of KNbO3},
volume={3}, DOI={10.1103/PhysRevMaterials.3.054401},
number={5054401}, journal={Physical Review Materials}, publisher={American Physical
Society}, author={Schmidt, Falko and Riefer, Arthur and Schmidt, Wolf Gero and
Schindlmayr, Arno and Imlau, Mirco and Dobener, Florian and Mengel, Nils and Chatterjee,
Sangam and Sanna, Simone}, year={2019} }'
chicago: Schmidt, Falko, Arthur Riefer, Wolf Gero Schmidt, Arno Schindlmayr, Mirco
Imlau, Florian Dobener, Nils Mengel, Sangam Chatterjee, and Simone Sanna. “Quasiparticle
and Excitonic Effects in the Optical Response of KNbO3.” Physical Review Materials
3, no. 5 (2019). https://doi.org/10.1103/PhysRevMaterials.3.054401.
ieee: 'F. Schmidt et al., “Quasiparticle and excitonic effects in the optical
response of KNbO3,” Physical Review Materials, vol. 3, no. 5, Art. no.
054401, 2019, doi: 10.1103/PhysRevMaterials.3.054401.'
mla: Schmidt, Falko, et al. “Quasiparticle and Excitonic Effects in the Optical
Response of KNbO3.” Physical Review Materials, vol. 3, no. 5, 054401, American
Physical Society, 2019, doi:10.1103/PhysRevMaterials.3.054401.
short: F. Schmidt, A. Riefer, W.G. Schmidt, A. Schindlmayr, M. Imlau, F. Dobener,
N. Mengel, S. Chatterjee, S. Sanna, Physical Review Materials 3 (2019).
date_created: 2019-05-29T06:55:29Z
date_updated: 2023-04-20T14:20:33Z
ddc:
- '530'
department:
- _id: '295'
- _id: '296'
- _id: '230'
- _id: '429'
- _id: '170'
- _id: '35'
doi: 10.1103/PhysRevMaterials.3.054401
external_id:
isi:
- '000467044000003'
file:
- access_level: open_access
content_type: application/pdf
creator: schindlm
date_created: 2020-08-27T19:05:54Z
date_updated: 2020-08-30T14:34:33Z
description: © 2019 American Physical Society
file_id: '18465'
file_name: PhysRevMaterials.3.054401.pdf
file_size: 1949504
relation: main_file
title: Quasiparticle and excitonic effects in the optical response of KNbO3
file_date_updated: 2020-08-30T14:34:33Z
has_accepted_license: '1'
intvolume: ' 3'
isi: '1'
issue: '5'
language:
- iso: eng
oa: '1'
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
- _id: '53'
name: TRR 142
- _id: '55'
name: TRR 142 - Project Area B
- _id: '69'
name: TRR 142 - Subproject B4
- _id: '52'
name: 'PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing'
publication: Physical Review Materials
publication_identifier:
eissn:
- 2475-9953
publication_status: published
publisher: American Physical Society
quality_controlled: '1'
status: public
title: Quasiparticle and excitonic effects in the optical response of KNbO3
type: journal_article
user_id: '16199'
volume: 3
year: '2019'
...
---
_id: '13365'
abstract:
- lang: eng
text: 'The KTiOPO4 (KTP) band structure and dielectric function are calculated on
various levels of theory starting from density-functional calculations. Within
the independent-particle approximation an electronic transport gap of 2.97 eV
is obtained that widens to about 5.23 eV when quasiparticle effects are included
using the GW approximation. The optical response is shown to be strongly anisotropic
due to (i) the slight asymmetry of the TiO6 octahedra in the (001) plane and (ii)
their anisotropic distribution along the [001] and [100] directions. In addition,
excitonic effects are very important: The solution of the Bethe–Salpeter equation
indicates exciton binding energies of the order of 1.5 eV. Calculations that include
both quasiparticle and excitonic effects are in good agreement with the measured
reflectivity.'
article_type: original
author:
- first_name: Sergej
full_name: Neufeld, Sergej
id: '23261'
last_name: Neufeld
- first_name: Adriana
full_name: Bocchini, Adriana
id: '58349'
last_name: Bocchini
orcid: https://orcid.org/0000-0002-2134-3075
- first_name: Uwe
full_name: Gerstmann, Uwe
id: '171'
last_name: Gerstmann
orcid: 0000-0002-4476-223X
- first_name: Arno
full_name: Schindlmayr, Arno
id: '458'
last_name: Schindlmayr
orcid: 0000-0002-4855-071X
- first_name: Wolf Gero
full_name: Schmidt, Wolf Gero
id: '468'
last_name: Schmidt
orcid: 0000-0002-2717-5076
citation:
ama: 'Neufeld S, Bocchini A, Gerstmann U, Schindlmayr A, Schmidt WG. Potassium titanyl
phosphate (KTP) quasiparticle energies and optical response. Journal of Physics:
Materials. 2019;2:045003. doi:10.1088/2515-7639/ab29ba'
apa: 'Neufeld, S., Bocchini, A., Gerstmann, U., Schindlmayr, A., & Schmidt,
W. G. (2019). Potassium titanyl phosphate (KTP) quasiparticle energies and optical
response. Journal of Physics: Materials, 2, 045003. https://doi.org/10.1088/2515-7639/ab29ba'
bibtex: '@article{Neufeld_Bocchini_Gerstmann_Schindlmayr_Schmidt_2019, title={Potassium
titanyl phosphate (KTP) quasiparticle energies and optical response}, volume={2},
DOI={10.1088/2515-7639/ab29ba},
journal={Journal of Physics: Materials}, publisher={IOP Publishing}, author={Neufeld,
Sergej and Bocchini, Adriana and Gerstmann, Uwe and Schindlmayr, Arno and Schmidt,
Wolf Gero}, year={2019}, pages={045003} }'
chicago: 'Neufeld, Sergej, Adriana Bocchini, Uwe Gerstmann, Arno Schindlmayr, and
Wolf Gero Schmidt. “Potassium Titanyl Phosphate (KTP) Quasiparticle Energies and
Optical Response.” Journal of Physics: Materials 2 (2019): 045003. https://doi.org/10.1088/2515-7639/ab29ba.'
ieee: 'S. Neufeld, A. Bocchini, U. Gerstmann, A. Schindlmayr, and W. G. Schmidt,
“Potassium titanyl phosphate (KTP) quasiparticle energies and optical response,”
Journal of Physics: Materials, vol. 2, p. 045003, 2019, doi: 10.1088/2515-7639/ab29ba.'
mla: 'Neufeld, Sergej, et al. “Potassium Titanyl Phosphate (KTP) Quasiparticle Energies
and Optical Response.” Journal of Physics: Materials, vol. 2, IOP Publishing,
2019, p. 045003, doi:10.1088/2515-7639/ab29ba.'
short: 'S. Neufeld, A. Bocchini, U. Gerstmann, A. Schindlmayr, W.G. Schmidt, Journal
of Physics: Materials 2 (2019) 045003.'
date_created: 2019-09-19T14:34:16Z
date_updated: 2023-04-21T11:36:12Z
ddc:
- '530'
department:
- _id: '296'
- _id: '295'
- _id: '230'
- _id: '429'
- _id: '170'
- _id: '35'
doi: 10.1088/2515-7639/ab29ba
external_id:
isi:
- '000560410300003'
file:
- access_level: open_access
content_type: application/pdf
creator: schindlm
date_created: 2020-08-28T09:07:18Z
date_updated: 2020-08-30T14:29:27Z
description: Creative Commons Attribution 3.0 Unported Public License (CC BY 3.0)
file_id: '18535'
file_name: Neufeld_2019_J._Phys._Mater._2_045003.pdf
file_size: 1481174
relation: main_file
title: Potassium titanyl phosphate (KTP) quasiparticle energies and optical response
file_date_updated: 2020-08-30T14:29:27Z
has_accepted_license: '1'
intvolume: ' 2'
isi: '1'
language:
- iso: eng
oa: '1'
page: '045003'
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
- _id: '53'
name: TRR 142
- _id: '55'
name: TRR 142 - Project Area B
- _id: '69'
name: TRR 142 - Subproject B4
- _id: '52'
name: 'PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing'
publication: 'Journal of Physics: Materials'
publication_identifier:
eissn:
- 2515-7639
publication_status: published
publisher: IOP Publishing
quality_controlled: '1'
status: public
title: Potassium titanyl phosphate (KTP) quasiparticle energies and optical response
type: journal_article
user_id: '171'
volume: 2
year: '2019'
...
---
_id: '22445'
abstract:
- lang: ger
text: Am Beispiel des chinesisch-deutschen Kooperationsstudiengangs Maschinenbau
an der Chinesisch-Deutschen Technischen Fakultät in Qingdao (China) werden unter
Rückgriff auf unterschiedliche im Rahmen formativer Evaluation erhobener Datensätze
Möglichkeiten und Grenzen der Integration von Fach- und Sprachlernen sowie Optimierungsmöglichkeiten
der Unterstützung des studienvorbereitenden und -begleitenden (Fach-)Spracherwerbs
diskutiert.
author:
- first_name: Vera
full_name: Denzer, Vera
last_name: Denzer
- first_name: Andrea
full_name: Didier, Andrea
last_name: Didier
- first_name: Sandra
full_name: Drumm, Sandra
last_name: Drumm
- first_name: Dennis
full_name: Hambach, Dennis
id: '32850'
last_name: Hambach
- first_name: Marta
full_name: Kaplinska-Zajontz, Marta
last_name: Kaplinska-Zajontz
- first_name: Josef
full_name: Noeke, Josef
last_name: Noeke
- first_name: Julia
full_name: Settinieri, Julia
last_name: Settinieri
- first_name: Lin
full_name: Xi, Lin
last_name: Xi
- first_name: Hongyu
full_name: Zhu, Hongyu
last_name: Zhu
citation:
ama: Denzer V, Didier A, Drumm S, et al. Integration von Sprach- und Fachlernen
im Kontext chinesisch-deutscher Kooperationsstudiengänge am Beispiel des Maschinenbaustudiums
an der Chinesisch-Deutschen Technischen Fakultät (CDTF, Qingdao/Paderborn). Informationen
Deutsch als Fremdsprache. 2019;46(1):178-199. doi:10.1515/infodaf-2019-0013
apa: Denzer, V., Didier, A., Drumm, S., Hambach, D., Kaplinska-Zajontz, M., Noeke,
J., Settinieri, J., Xi, L., & Zhu, H. (2019). Integration von Sprach- und
Fachlernen im Kontext chinesisch-deutscher Kooperationsstudiengänge am Beispiel
des Maschinenbaustudiums an der Chinesisch-Deutschen Technischen Fakultät (CDTF,
Qingdao/Paderborn). Informationen Deutsch als Fremdsprache, 46(1),
178–199. https://doi.org/10.1515/infodaf-2019-0013
bibtex: '@article{Denzer_Didier_Drumm_Hambach_Kaplinska-Zajontz_Noeke_Settinieri_Xi_Zhu_2019,
title={Integration von Sprach- und Fachlernen im Kontext chinesisch-deutscher
Kooperationsstudiengänge am Beispiel des Maschinenbaustudiums an der Chinesisch-Deutschen
Technischen Fakultät (CDTF, Qingdao/Paderborn)}, volume={46}, DOI={10.1515/infodaf-2019-0013},
number={1}, journal={Informationen Deutsch als Fremdsprache}, publisher={De Gruyter
Mouton}, author={Denzer, Vera and Didier, Andrea and Drumm, Sandra and Hambach,
Dennis and Kaplinska-Zajontz, Marta and Noeke, Josef and Settinieri, Julia and
Xi, Lin and Zhu, Hongyu}, year={2019}, pages={178–199} }'
chicago: 'Denzer, Vera, Andrea Didier, Sandra Drumm, Dennis Hambach, Marta Kaplinska-Zajontz,
Josef Noeke, Julia Settinieri, Lin Xi, and Hongyu Zhu. “Integration von Sprach-
und Fachlernen im Kontext chinesisch-deutscher Kooperationsstudiengänge am Beispiel
des Maschinenbaustudiums an der Chinesisch-Deutschen Technischen Fakultät (CDTF,
Qingdao/Paderborn).” Informationen Deutsch als Fremdsprache 46, no. 1 (2019):
178–99. https://doi.org/10.1515/infodaf-2019-0013.'
ieee: 'V. Denzer et al., “Integration von Sprach- und Fachlernen im Kontext
chinesisch-deutscher Kooperationsstudiengänge am Beispiel des Maschinenbaustudiums
an der Chinesisch-Deutschen Technischen Fakultät (CDTF, Qingdao/Paderborn),” Informationen
Deutsch als Fremdsprache, vol. 46, no. 1, pp. 178–199, 2019, doi: 10.1515/infodaf-2019-0013.'
mla: Denzer, Vera, et al. “Integration von Sprach- und Fachlernen im Kontext chinesisch-deutscher
Kooperationsstudiengänge am Beispiel des Maschinenbaustudiums an der Chinesisch-Deutschen
Technischen Fakultät (CDTF, Qingdao/Paderborn).” Informationen Deutsch als
Fremdsprache, vol. 46, no. 1, De Gruyter Mouton, 2019, pp. 178–99, doi:10.1515/infodaf-2019-0013.
short: V. Denzer, A. Didier, S. Drumm, D. Hambach, M. Kaplinska-Zajontz, J. Noeke,
J. Settinieri, L. Xi, H. Zhu, Informationen Deutsch als Fremdsprache 46 (2019)
178–199.
date_created: 2021-06-15T11:10:19Z
date_updated: 2023-04-27T09:02:12Z
department:
- _id: '9'
- _id: '146'
- _id: '398'
doi: 10.1515/infodaf-2019-0013
intvolume: ' 46'
issue: '1'
language:
- iso: ger
page: 178-199
publication: Informationen Deutsch als Fremdsprache
publication_identifier:
isbn:
- 2511-0853
publication_status: published
publisher: De Gruyter Mouton
quality_controlled: '1'
status: public
title: Integration von Sprach- und Fachlernen im Kontext chinesisch-deutscher Kooperationsstudiengänge
am Beispiel des Maschinenbaustudiums an der Chinesisch-Deutschen Technischen Fakultät
(CDTF, Qingdao/Paderborn)
type: journal_article
user_id: '32850'
volume: 46
year: '2019'
...
---
_id: '25908'
abstract:
- lang: eng
text: Herein we present a new proton-conducting iron(II) metal–organic framework
(MOF) of an unusual structure formed by chains of alternating bistriazolate-p-benzoquinone
anions and iron(II) cations with four axially coordinated water molecules. These
chains assemble via π–π stacking between the aromatic units to form a three-dimensional
grid-like network with channel pores filled with water molecules. The material
was structurally characterized by single-crystal XRD analysis, and its water and
thermal stability was investigated. The proton conductivity was studied by impedance
measurements on needle-like single crystals. A simple but efficient measurement
setup consisting of interdigital electrodes was used. The influence of the crystal
orientation, temperature, and humidity was investigated. The iron(II)-MOF showed
the highest proton conductivity of 3.3·10–3 S cm–1 at 22 °C and 94% relative humidity.
Contrary to most known structures, the conductivity in this material is controlled
by chemical properties of the pore system rather than by grain boundaries. The
presented material is the starting point for further tailoring the proton-conducting
properties, independent of morphological features which could find potential applications
as membrane materials in proton-exchange membrane fuel cells.
article_type: original
author:
- first_name: Hana
full_name: Bunzen, Hana
last_name: Bunzen
- first_name: Ali
full_name: Javed, Ali
last_name: Javed
- first_name: Danielle
full_name: Klawinski, Danielle
last_name: Klawinski
- first_name: Anton
full_name: Lamp, Anton
last_name: Lamp
- first_name: Maciej
full_name: Grzywa, Maciej
last_name: Grzywa
- first_name: Andreas
full_name: Kalytta-Mewes, Andreas
last_name: Kalytta-Mewes
- first_name: Michael
full_name: Tiemann, Michael
id: '23547'
last_name: Tiemann
orcid: 0000-0003-1711-2722
- first_name: Hans-Albrecht Krug
full_name: von Nidda, Hans-Albrecht Krug
last_name: von Nidda
- first_name: Thorsten
full_name: Wagner, Thorsten
last_name: Wagner
- first_name: Dirk
full_name: Volkmer, Dirk
last_name: Volkmer
citation:
ama: Bunzen H, Javed A, Klawinski D, et al. Anisotropic Water-Mediated Proton Conductivity
in Large Iron(II) Metal–Organic Framework Single Crystals for Proton-Exchange
Membrane Fuel Cells. ACS Applied Nano Materials. Published online 2019:291-298.
doi:10.1021/acsanm.8b01902
apa: Bunzen, H., Javed, A., Klawinski, D., Lamp, A., Grzywa, M., Kalytta-Mewes,
A., Tiemann, M., von Nidda, H.-A. K., Wagner, T., & Volkmer, D. (2019). Anisotropic
Water-Mediated Proton Conductivity in Large Iron(II) Metal–Organic Framework Single
Crystals for Proton-Exchange Membrane Fuel Cells. ACS Applied Nano Materials,
291–298. https://doi.org/10.1021/acsanm.8b01902
bibtex: '@article{Bunzen_Javed_Klawinski_Lamp_Grzywa_Kalytta-Mewes_Tiemann_von Nidda_Wagner_Volkmer_2019,
title={Anisotropic Water-Mediated Proton Conductivity in Large Iron(II) Metal–Organic
Framework Single Crystals for Proton-Exchange Membrane Fuel Cells}, DOI={10.1021/acsanm.8b01902},
journal={ACS Applied Nano Materials}, author={Bunzen, Hana and Javed, Ali and
Klawinski, Danielle and Lamp, Anton and Grzywa, Maciej and Kalytta-Mewes, Andreas
and Tiemann, Michael and von Nidda, Hans-Albrecht Krug and Wagner, Thorsten and
Volkmer, Dirk}, year={2019}, pages={291–298} }'
chicago: Bunzen, Hana, Ali Javed, Danielle Klawinski, Anton Lamp, Maciej Grzywa,
Andreas Kalytta-Mewes, Michael Tiemann, Hans-Albrecht Krug von Nidda, Thorsten
Wagner, and Dirk Volkmer. “Anisotropic Water-Mediated Proton Conductivity in Large
Iron(II) Metal–Organic Framework Single Crystals for Proton-Exchange Membrane
Fuel Cells.” ACS Applied Nano Materials, 2019, 291–98. https://doi.org/10.1021/acsanm.8b01902.
ieee: 'H. Bunzen et al., “Anisotropic Water-Mediated Proton Conductivity
in Large Iron(II) Metal–Organic Framework Single Crystals for Proton-Exchange
Membrane Fuel Cells,” ACS Applied Nano Materials, pp. 291–298, 2019, doi:
10.1021/acsanm.8b01902.'
mla: Bunzen, Hana, et al. “Anisotropic Water-Mediated Proton Conductivity in Large
Iron(II) Metal–Organic Framework Single Crystals for Proton-Exchange Membrane
Fuel Cells.” ACS Applied Nano Materials, 2019, pp. 291–98, doi:10.1021/acsanm.8b01902.
short: H. Bunzen, A. Javed, D. Klawinski, A. Lamp, M. Grzywa, A. Kalytta-Mewes,
M. Tiemann, H.-A.K. von Nidda, T. Wagner, D. Volkmer, ACS Applied Nano Materials
(2019) 291–298.
date_created: 2021-10-08T10:46:06Z
date_updated: 2023-03-08T08:30:01Z
department:
- _id: '35'
- _id: '2'
- _id: '307'
doi: 10.1021/acsanm.8b01902
language:
- iso: eng
page: 291-298
publication: ACS Applied Nano Materials
publication_identifier:
issn:
- 2574-0970
- 2574-0970
publication_status: published
quality_controlled: '1'
status: public
title: Anisotropic Water-Mediated Proton Conductivity in Large Iron(II) Metal–Organic
Framework Single Crystals for Proton-Exchange Membrane Fuel Cells
type: journal_article
user_id: '23547'
year: '2019'
...
---
_id: '25906'
abstract:
- lang: eng
text: A composite material of copper oxide (CuO) dispersed in the nanopores of KIT-6
silica (SiO2) is used as a dosimetric sensor for the detection of hydrogen sulfide
(H2S) gas in low parts per milion concentrations. The sensor principle is based
on the reversible chemical conversion of CuO to CuS, which guarantees a high selectivity,
and on the corresponding percolation-induced change in electronic conductance.
article_type: original
author:
- first_name: Andrej
full_name: Paul, Andrej
last_name: Paul
- first_name: Christian
full_name: Weinberger, Christian
id: '11848'
last_name: Weinberger
- first_name: Michael
full_name: Tiemann, Michael
id: '23547'
last_name: Tiemann
orcid: 0000-0003-1711-2722
- first_name: Thorsten
full_name: Wagner, Thorsten
last_name: Wagner
citation:
ama: Paul A, Weinberger C, Tiemann M, Wagner T. Copper Oxide/Silica Nanocomposites
for Selective and Stable H2S Gas Detection. ACS Applied Nano Materials.
Published online 2019:3335-3338. doi:10.1021/acsanm.9b01004
apa: Paul, A., Weinberger, C., Tiemann, M., & Wagner, T. (2019). Copper Oxide/Silica
Nanocomposites for Selective and Stable H2S Gas Detection. ACS Applied Nano
Materials, 3335–3338. https://doi.org/10.1021/acsanm.9b01004
bibtex: '@article{Paul_Weinberger_Tiemann_Wagner_2019, title={Copper Oxide/Silica
Nanocomposites for Selective and Stable H2S Gas Detection}, DOI={10.1021/acsanm.9b01004},
journal={ACS Applied Nano Materials}, author={Paul, Andrej and Weinberger, Christian
and Tiemann, Michael and Wagner, Thorsten}, year={2019}, pages={3335–3338} }'
chicago: Paul, Andrej, Christian Weinberger, Michael Tiemann, and Thorsten Wagner.
“Copper Oxide/Silica Nanocomposites for Selective and Stable H2S Gas Detection.”
ACS Applied Nano Materials, 2019, 3335–38. https://doi.org/10.1021/acsanm.9b01004.
ieee: 'A. Paul, C. Weinberger, M. Tiemann, and T. Wagner, “Copper Oxide/Silica Nanocomposites
for Selective and Stable H2S Gas Detection,” ACS Applied Nano Materials,
pp. 3335–3338, 2019, doi: 10.1021/acsanm.9b01004.'
mla: Paul, Andrej, et al. “Copper Oxide/Silica Nanocomposites for Selective and
Stable H2S Gas Detection.” ACS Applied Nano Materials, 2019, pp. 3335–38,
doi:10.1021/acsanm.9b01004.
short: A. Paul, C. Weinberger, M. Tiemann, T. Wagner, ACS Applied Nano Materials
(2019) 3335–3338.
date_created: 2021-10-08T10:43:58Z
date_updated: 2023-03-08T08:30:28Z
department:
- _id: '35'
- _id: '2'
- _id: '307'
doi: 10.1021/acsanm.9b01004
language:
- iso: eng
page: 3335-3338
publication: ACS Applied Nano Materials
publication_identifier:
issn:
- 2574-0970
- 2574-0970
publication_status: published
quality_controlled: '1'
status: public
title: Copper Oxide/Silica Nanocomposites for Selective and Stable H2S Gas Detection
type: journal_article
user_id: '23547'
year: '2019'
...
---
_id: '21451'
author:
- first_name: Tim
full_name: Rostek, Tim
id: '3469'
last_name: Rostek
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
citation:
ama: 'Rostek T, Homberg W. Improved set up strategies for steel strip straightening
machines. In: AIP Conference Proceedings 2113, 170018. Vol 2113. AIP Conference
Proceedings. AIP Publishing; 2019. doi:10.1063/1.5112734'
apa: Rostek, T., & Homberg, W. (2019). Improved set up strategies for steel
strip straightening machines. AIP Conference Proceedings 2113, 170018,
2113(1). https://doi.org/10.1063/1.5112734
bibtex: '@inproceedings{Rostek_Homberg_2019, series={AIP Conference Proceedings},
title={Improved set up strategies for steel strip straightening machines}, volume={2113},
DOI={10.1063/1.5112734}, number={1},
booktitle={AIP Conference Proceedings 2113, 170018}, publisher={AIP Publishing},
author={Rostek, Tim and Homberg, Werner}, year={2019}, collection={AIP Conference
Proceedings} }'
chicago: Rostek, Tim, and Werner Homberg. “Improved Set up Strategies for Steel
Strip Straightening Machines.” In AIP Conference Proceedings 2113, 170018,
Vol. 2113. AIP Conference Proceedings. AIP Publishing, 2019. https://doi.org/10.1063/1.5112734.
ieee: 'T. Rostek and W. Homberg, “Improved set up strategies for steel strip straightening
machines,” in AIP Conference Proceedings 2113, 170018, 2019, vol. 2113,
no. 1, doi: 10.1063/1.5112734.'
mla: Rostek, Tim, and Werner Homberg. “Improved Set up Strategies for Steel Strip
Straightening Machines.” AIP Conference Proceedings 2113, 170018, vol.
2113, no. 1, AIP Publishing, 2019, doi:10.1063/1.5112734.
short: 'T. Rostek, W. Homberg, in: AIP Conference Proceedings 2113, 170018, AIP
Publishing, 2019.'
date_created: 2021-03-11T16:20:08Z
date_updated: 2023-04-27T08:45:10Z
department:
- _id: '156'
doi: 10.1063/1.5112734
intvolume: ' 2113'
issue: '1'
language:
- iso: eng
publication: AIP Conference Proceedings 2113, 170018
publication_status: published
publisher: AIP Publishing
quality_controlled: '1'
series_title: AIP Conference Proceedings
status: public
title: Improved set up strategies for steel strip straightening machines
type: conference
user_id: '3469'
volume: 2113
year: '2019'
...
---
_id: '21519'
author:
- first_name: Matti
full_name: Grabo, Matti
id: '66520'
last_name: Grabo
- first_name: Daniel
full_name: Weber, Daniel
id: '24041'
last_name: Weber
orcid: 0000-0003-3367-5998
- first_name: Andreas
full_name: Paul, Andreas
id: '7828'
last_name: Paul
- first_name: Tobias
full_name: Klaus, Tobias
last_name: Klaus
- first_name: Wolfgang
full_name: Bermpohl, Wolfgang
id: '15290'
last_name: Bermpohl
- first_name: Stefan
full_name: Krauter, Stefan
id: '28836'
last_name: Krauter
orcid: 0000-0002-3594-260X
- first_name: Eugeny
full_name: Kenig, Eugeny
id: '665'
last_name: Kenig
citation:
ama: Grabo M, Weber D, Paul A, et al. Numerical Investigation of the Temperature
Distribution in PCM-integrated Solar Modules. CHEMICAL ENGINEERING TRANSACTIONS.
2019;76:895-900. doi:10.3303/CET1976150
apa: Grabo, M., Weber, D., Paul, A., Klaus, T., Bermpohl, W., Krauter, S., &
Kenig, E. (2019). Numerical Investigation of the Temperature Distribution in PCM-integrated
Solar Modules. CHEMICAL ENGINEERING TRANSACTIONS, 76, 895–900. https://doi.org/10.3303/CET1976150
bibtex: '@article{Grabo_Weber_Paul_Klaus_Bermpohl_Krauter_Kenig_2019, title={Numerical
Investigation of the Temperature Distribution in PCM-integrated Solar Modules},
volume={76}, DOI={10.3303/CET1976150},
journal={CHEMICAL ENGINEERING TRANSACTIONS}, publisher={AIDIC The Italian Association
of Chemical Engineering}, author={Grabo, Matti and Weber, Daniel and Paul, Andreas
and Klaus, Tobias and Bermpohl, Wolfgang and Krauter, Stefan and Kenig, Eugeny},
year={2019}, pages={895–900} }'
chicago: 'Grabo, Matti, Daniel Weber, Andreas Paul, Tobias Klaus, Wolfgang Bermpohl,
Stefan Krauter, and Eugeny Kenig. “Numerical Investigation of the Temperature
Distribution in PCM-Integrated Solar Modules.” CHEMICAL ENGINEERING TRANSACTIONS
76 (2019): 895–900. https://doi.org/10.3303/CET1976150.'
ieee: 'M. Grabo et al., “Numerical Investigation of the Temperature Distribution
in PCM-integrated Solar Modules,” CHEMICAL ENGINEERING TRANSACTIONS, vol.
76, pp. 895–900, 2019, doi: 10.3303/CET1976150.'
mla: Grabo, Matti, et al. “Numerical Investigation of the Temperature Distribution
in PCM-Integrated Solar Modules.” CHEMICAL ENGINEERING TRANSACTIONS, vol.
76, AIDIC The Italian Association of Chemical Engineering, 2019, pp. 895–900,
doi:10.3303/CET1976150.
short: M. Grabo, D. Weber, A. Paul, T. Klaus, W. Bermpohl, S. Krauter, E. Kenig,
CHEMICAL ENGINEERING TRANSACTIONS 76 (2019) 895–900.
date_created: 2021-03-16T12:25:44Z
date_updated: 2023-04-27T11:09:16Z
department:
- _id: '145'
- _id: '728'
- _id: '52'
- _id: '393'
- _id: '155'
- _id: '9'
doi: 10.3303/CET1976150
intvolume: ' 76'
language:
- iso: eng
page: 895-900
publication: CHEMICAL ENGINEERING TRANSACTIONS
publication_identifier:
isbn:
- 978-88-95608-73-0
publication_status: published
publisher: AIDIC The Italian Association of Chemical Engineering
quality_controlled: '1'
status: public
title: Numerical Investigation of the Temperature Distribution in PCM-integrated Solar
Modules
type: journal_article
user_id: '7828'
volume: 76
year: '2019'
...
---
_id: '21518'
abstract:
- lang: ger
text: "Wie jedes technische System unterliegen auch Haushaltskältegeräte einer alterungsbedingten
Degeneration, die zu einem Anstieg der Energieaufnahme über die Lebensdauer dieser
Geräte führt. Ursache hierfür sind verschiedene Effekte, die in dem vom BMWi geförderten
Projekt ALGE untersucht werden. Aus den so gewonnenen Erkenntnissen sollen dann
degenerationsbeständigere Haushaltskältegeräte entwickelt werden. Eine wichtige
Alterungsursache ist der Anstieg der Wärmeleitfähigkeit des PUR-Schaums der Gehäuseisolierung.
Zur Bestimmung dieses Einflusses auf die Energieaufnahme ist die Entwicklung neuer
Messmethoden notwendig, die zerstörungsfrei sein und den realen Anwendungsbedingungen
möglichst nahekommen sollen. Dazu wurde eine Wärmesenke entwickelt, die den Geräteinnenraum
unabhängig vom Kältekreislauf abkühlt. Die Wärmesenke ist als Eiswasserbehälter
ausgeführt, sodass die Schmelzenthalpie des Eises die durch die Isolierung in
den Geräteinnenraum einfallende Wärme aufnimmt. Durch die Bestimmung der Abtauzeit
einer bestimmten Eismenge kann so der alterungsbeeinflusste \U0001D458∙\U0001D434-Wert
des Gehäuses von Haushaltskältegeräten bestimmt werden."
author:
- first_name: Andreas
full_name: Paul, Andreas
id: '7828'
last_name: Paul
- first_name: Lukas
full_name: Moczarski, Lukas
last_name: Moczarski
- first_name: Mirko
full_name: Gieselmann, Mirko
last_name: Gieselmann
- first_name: Michael
full_name: Reineke, Michael
id: '24603'
last_name: Reineke
- first_name: Andreas
full_name: Elsner, Andreas
id: '16124'
last_name: Elsner
- first_name: Elmar
full_name: Baumhögger, Elmar
id: '15164'
last_name: Baumhögger
- first_name: Gerrit
full_name: Sonnenrein, Gerrit
last_name: Sonnenrein
- first_name: Jadran
full_name: Vrabec, Jadran
last_name: Vrabec
citation:
ama: 'Paul A, Moczarski L, Gieselmann M, et al. Bestimmung von Wärmeverlusten in
Haushaltskältegeräten. In: Deutscher Kälte- und Klimatechnischer Verein (DKV)
e.V., ed. Deutscher Kälte- und Klimatechnischer Verein e.V. ; 2019.'
apa: Paul, A., Moczarski, L., Gieselmann, M., Reineke, M., Elsner, A., Baumhögger,
E., Sonnenrein, G., & Vrabec, J. (2019). Bestimmung von Wärmeverlusten
in Haushaltskältegeräten (Deutscher Kälte- und Klimatechnischer Verein (DKV)
e.V., Ed.). Deutscher Kälte- und Klimatechnischer Verein e.V. .
bibtex: '@inproceedings{Paul_Moczarski_Gieselmann_Reineke_Elsner_Baumhögger_Sonnenrein_Vrabec_2019,
place={Hannover}, title={Bestimmung von Wärmeverlusten in Haushaltskältegeräten},
publisher={Deutscher Kälte- und Klimatechnischer Verein e.V. }, author={Paul,
Andreas and Moczarski, Lukas and Gieselmann, Mirko and Reineke, Michael and Elsner,
Andreas and Baumhögger, Elmar and Sonnenrein, Gerrit and Vrabec, Jadran}, editor={Deutscher
Kälte- und Klimatechnischer Verein (DKV) e.V.}, year={2019} }'
chicago: 'Paul, Andreas, Lukas Moczarski, Mirko Gieselmann, Michael Reineke, Andreas
Elsner, Elmar Baumhögger, Gerrit Sonnenrein, and Jadran Vrabec. “Bestimmung von
Wärmeverlusten in Haushaltskältegeräten.” edited by Deutscher Kälte- und Klimatechnischer
Verein (DKV) e.V. Hannover: Deutscher Kälte- und Klimatechnischer Verein e.V.
, 2019.'
ieee: A. Paul et al., “Bestimmung von Wärmeverlusten in Haushaltskältegeräten,”
Ulm, 2019.
mla: Paul, Andreas, et al. Bestimmung von Wärmeverlusten in Haushaltskältegeräten.
Edited by Deutscher Kälte- und Klimatechnischer Verein (DKV) e.V., Deutscher Kälte-
und Klimatechnischer Verein e.V. , 2019.
short: 'A. Paul, L. Moczarski, M. Gieselmann, M. Reineke, A. Elsner, E. Baumhögger,
G. Sonnenrein, J. Vrabec, in: Deutscher Kälte- und Klimatechnischer Verein (DKV)
e.V. (Ed.), Deutscher Kälte- und Klimatechnischer Verein e.V. , Hannover, 2019.'
conference:
end_date: 2019-11-22
location: Ulm
name: Deutsche Kälte-Klima Tagung 45
start_date: 2019-11-20
corporate_editor:
- Deutscher Kälte- und Klimatechnischer Verein (DKV) e.V.
date_created: 2021-03-16T12:16:34Z
date_updated: 2023-04-27T11:10:53Z
department:
- _id: '728'
- _id: '155'
- _id: '9'
- _id: '393'
language:
- iso: ger
place: Hannover
publication_identifier:
isbn:
- 978-3-932715-52-5
publication_status: published
publisher: 'Deutscher Kälte- und Klimatechnischer Verein e.V. '
quality_controlled: '1'
status: public
title: Bestimmung von Wärmeverlusten in Haushaltskältegeräten
type: conference
user_id: '7828'
year: '2019'
...
---
_id: '25619'
author:
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
- first_name: M.
full_name: Dörner, M.
last_name: Dörner
- first_name: C.
full_name: Marschik, C.
last_name: Marschik
- first_name: W.
full_name: Roland, W.
last_name: Roland
- first_name: J.
full_name: Miethlinger, J.
last_name: Miethlinger
- first_name: G.
full_name: Steinbichler, G.
last_name: Steinbichler
citation:
ama: 'Schöppner V, Dörner M, Marschik C, Roland W, Miethlinger J, Steinbichler G.
Application of Network Analysis to Flow Systems with Alternating Wave Channels:
Part A (Pressure Flows). Polymers. Published online 2019:1488-1515.'
apa: 'Schöppner, V., Dörner, M., Marschik, C., Roland, W., Miethlinger, J., &
Steinbichler, G. (2019). Application of Network Analysis to Flow Systems with
Alternating Wave Channels: Part A (Pressure Flows). Polymers, 1488–1515.'
bibtex: '@article{Schöppner_Dörner_Marschik_Roland_Miethlinger_Steinbichler_2019,
title={Application of Network Analysis to Flow Systems with Alternating Wave Channels:
Part A (Pressure Flows).}, journal={Polymers}, author={Schöppner, Volker and Dörner,
M. and Marschik, C. and Roland, W. and Miethlinger, J. and Steinbichler, G.},
year={2019}, pages={1488–1515} }'
chicago: 'Schöppner, Volker, M. Dörner, C. Marschik, W. Roland, J. Miethlinger,
and G. Steinbichler. “Application of Network Analysis to Flow Systems with Alternating
Wave Channels: Part A (Pressure Flows).” Polymers, 2019, 1488–1515.'
ieee: 'V. Schöppner, M. Dörner, C. Marschik, W. Roland, J. Miethlinger, and G. Steinbichler,
“Application of Network Analysis to Flow Systems with Alternating Wave Channels:
Part A (Pressure Flows).,” Polymers, pp. 1488–1515, 2019.'
mla: 'Schöppner, Volker, et al. “Application of Network Analysis to Flow Systems
with Alternating Wave Channels: Part A (Pressure Flows).” Polymers, 2019,
pp. 1488–515.'
short: V. Schöppner, M. Dörner, C. Marschik, W. Roland, J. Miethlinger, G. Steinbichler,
Polymers (2019) 1488–1515.
date_created: 2021-10-07T08:51:02Z
date_updated: 2023-05-02T06:51:42Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
page: 1488-1515
publication: Polymers
publication_identifier:
unknown:
- 'DOI: 10.3390/polym11091488 '
quality_controlled: '1'
status: public
title: 'Application of Network Analysis to Flow Systems with Alternating Wave Channels:
Part A (Pressure Flows).'
type: journal_article
user_id: '44116'
year: '2019'
...
---
_id: '44308'
author:
- first_name: Hoda
full_name: Bayazian, Hoda
last_name: Bayazian
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
- first_name: Ali
full_name: Yadegari , Ali
last_name: 'Yadegari '
- first_name: Hoda
full_name: Haddad , Hoda
last_name: 'Haddad '
citation:
ama: 'Bayazian H, Schöppner V, Yadegari A, Haddad H. Orientation in LLDPE Cast
Films Manufactured under Different Processing Parameters. In: ; 2019.'
apa: Bayazian, H., Schöppner, V., Yadegari , A., & Haddad , H. (2019). Orientation
in LLDPE Cast Films Manufactured under Different Processing Parameters. 35th
PPS , Türkei .
bibtex: '@inproceedings{Bayazian_Schöppner_Yadegari _Haddad _2019, title={Orientation
in LLDPE Cast Films Manufactured under Different Processing Parameters}, author={Bayazian,
Hoda and Schöppner, Volker and Yadegari , Ali and Haddad , Hoda}, year={2019}
}'
chicago: Bayazian, Hoda, Volker Schöppner, Ali Yadegari , and Hoda Haddad . “Orientation
in LLDPE Cast Films Manufactured under Different Processing Parameters,” 2019.
ieee: H. Bayazian, V. Schöppner, A. Yadegari , and H. Haddad , “Orientation in LLDPE
Cast Films Manufactured under Different Processing Parameters,” presented at the
35th PPS , Türkei , 2019.
mla: Bayazian, Hoda, et al. Orientation in LLDPE Cast Films Manufactured under
Different Processing Parameters. 2019.
short: 'H. Bayazian, V. Schöppner, A. Yadegari , H. Haddad , in: 2019.'
conference:
location: 'Türkei '
name: '35th PPS '
date_created: 2023-05-02T08:24:35Z
date_updated: 2023-05-02T08:24:38Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
quality_controlled: '1'
status: public
title: Orientation in LLDPE Cast Films Manufactured under Different Processing Parameters
type: conference
user_id: '44116'
year: '2019'
...
---
_id: '22441'
abstract:
- lang: eng
text: According to ISO / ASTM 52900, additive manufacturing (AM) is defined as "the
process of joining materials to make parts from 3D model data, usually layer upon
layer, as opposed to conventional manufacturing including subtractive manufacturing
technologies and formative manufacturing methodologies” [1]. This results in significant
advantages over conventional manufacturing methodologies, such as the production
of topologically optimized, complex structures, lower material consumption or
shorter product development cycles. In order to be able to use these advantages,
the possibilities and restrictions of the processes must be known. In particular,
selective laser beam melting (SLM), in which a powdery metallic starting material
is melted by means of a laser, requires a sound understanding of the process.
For this purpose, design guidelines have been presented in various scientific
papers. These design guidelines help to design a component in such a way that
it can be manufactured successfully using additive manufacturing. These so-called
“AMsuitable design guidelines” can be found among others at Adam, Kranz and Thomas
[2,3,4,5]. In contrast to established manufacturing processes, the post-processing
of additive components is divided into two steps. First, the AM immanent post
processing, such as the removing of the component from the building platform or
the removing of the remaining powder. These post-processing steps are in the following
referred to “post-processing”. Secondly, the subsequent post-processing steps
to improve the component properties, such as milling and turning or a stress-relief
annealing. These are referred to as “finishing” and form the focus of this paper.
With regard to a successful finishing of additively manufactured components, design
guidelines must be taken into account that consider the finishing inherent restrictions
and possibilities. In the following, these design guidelines are referred to “finishing
suitable”. They can deviate significantly from those of conventionally manufactured
components in the case of additively manufactured components. Although there are
some investigations that deal with the post-processing of additively manufactured
components [6,7], there are hardly any design guidelines that are suitable for
finishing [8]. Therefore, knowledge about the finishing of additively manufactured
components is based on experimental experience rather than on scientific knowledge.
For this reason, design guidelines for a finishing suitable design must be methodically
determined and quantified. These quantified design guidelines can be used for
an automated design check on complex components like topology optimized geometries.
author:
- first_name: Stefan
full_name: Lammers, Stefan
id: '13835'
last_name: Lammers
- first_name: Johannes
full_name: Tominski, Johannes
last_name: Tominski
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: 'Lammers S, Tominski J, Zimmer D. Guidelines for post processing oriented design
of additive manufactured parts for use in topology optimization. In: II International
Conference on Simulation for Additive Manufacturing Sim-AM 2019 11-13 September,
2019. ; 2019:174-185. doi:http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf'
apa: Lammers, S., Tominski, J., & Zimmer, D. (2019). Guidelines for post processing
oriented design of additive manufactured parts for use in topology optimization.
II International Conference on Simulation for Additive Manufacturing Sim-AM
2019 11-13 September, 2019, 174–185. http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf
bibtex: '@inproceedings{Lammers_Tominski_Zimmer_2019, title={Guidelines for post
processing oriented design of additive manufactured parts for use in topology
optimization}, DOI={http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf},
booktitle={II International Conference on Simulation for Additive Manufacturing
Sim-AM 2019 11-13 September, 2019}, author={Lammers, Stefan and Tominski, Johannes
and Zimmer, Detmar}, year={2019}, pages={174–185} }'
chicago: Lammers, Stefan, Johannes Tominski, and Detmar Zimmer. “Guidelines for
Post Processing Oriented Design of Additive Manufactured Parts for Use in Topology
Optimization.” In II International Conference on Simulation for Additive Manufacturing
Sim-AM 2019 11-13 September, 2019, 174–85, 2019. http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf.
ieee: 'S. Lammers, J. Tominski, and D. Zimmer, “Guidelines for post processing oriented
design of additive manufactured parts for use in topology optimization,” in II
International Conference on Simulation for Additive Manufacturing Sim-AM 2019
11-13 September, 2019, 2019, pp. 174–185, doi: http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf.'
mla: Lammers, Stefan, et al. “Guidelines for Post Processing Oriented Design of
Additive Manufactured Parts for Use in Topology Optimization.” II International
Conference on Simulation for Additive Manufacturing Sim-AM 2019 11-13 September,
2019, 2019, pp. 174–85, doi:http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf.
short: 'S. Lammers, J. Tominski, D. Zimmer, in: II International Conference on Simulation
for Additive Manufacturing Sim-AM 2019 11-13 September, 2019, 2019, pp. 174–185.'
date_created: 2021-06-15T11:10:15Z
date_updated: 2023-05-04T07:26:59Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf
language:
- iso: eng
page: 174-185
publication: II International Conference on Simulation for Additive Manufacturing
Sim-AM 2019 11-13 September, 2019
publication_identifier:
isbn:
- 978-84-949194-8-0
quality_controlled: '1'
status: public
title: Guidelines for post processing oriented design of additive manufactured parts
for use in topology optimization
type: conference
user_id: '13835'
year: '2019'
...
---
_id: '25641'
abstract:
- lang: eng
text: Langzeitfestigkeit von Schweißungen aus PP unter Berücksichtigung der Morphologie
author:
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
- first_name: Andrea
full_name: Wübbeke, Andrea
id: '12504'
last_name: Wübbeke
- first_name: Andre
full_name: Paul, Andre
last_name: Paul
- first_name: Michael
full_name: Tiemann, Michael
id: '23547'
last_name: Tiemann
orcid: 0000-0003-1711-2722
- first_name: F.
full_name: Fitze, F.
last_name: Fitze
- first_name: Laura
full_name: Austermeier, Laura
id: '45326'
last_name: Austermeier
- first_name: M.
full_name: Chen, M.
last_name: Chen
- first_name: F.
full_name: Jakob, F.
last_name: Jakob
- first_name: H.-P.
full_name: Heim, H.-P.
last_name: Heim
- first_name: T.
full_name: Wu, T.
last_name: Wu
- first_name: T.
full_name: Niendorf, T.
last_name: Niendorf
- first_name: M-L.
full_name: Röhricht, M-L.
last_name: Röhricht
- first_name: M.
full_name: Schmidt, M.
last_name: Schmidt
citation:
ama: 'Schöppner V, Wübbeke A, Paul A, et al. Langzeitfestigkeit von Schweißungen
aus PP unter Berücksichtigung der Morphologie. In: Werkstoffwoche (2019).
; 2019.'
apa: Schöppner, V., Wübbeke, A., Paul, A., Tiemann, M., Fitze, F., Austermeier,
L., Chen, M., Jakob, F., Heim, H.-P., Wu, T., Niendorf, T., Röhricht, M.-L., &
Schmidt, M. (2019). Langzeitfestigkeit von Schweißungen aus PP unter Berücksichtigung
der Morphologie. Werkstoffwoche (2019). Werkstoffwoche (2019), Dresden
(Deutschland).
bibtex: '@inproceedings{Schöppner_Wübbeke_Paul_Tiemann_Fitze_Austermeier_Chen_Jakob_Heim_Wu_et
al._2019, place={Dresden (Deutschland)}, title={Langzeitfestigkeit von Schweißungen
aus PP unter Berücksichtigung der Morphologie}, booktitle={Werkstoffwoche (2019)},
author={Schöppner, Volker and Wübbeke, Andrea and Paul, Andre and Tiemann, Michael
and Fitze, F. and Austermeier, Laura and Chen, M. and Jakob, F. and Heim, H.-P.
and Wu, T. and et al.}, year={2019} }'
chicago: Schöppner, Volker, Andrea Wübbeke, Andre Paul, Michael Tiemann, F. Fitze,
Laura Austermeier, M. Chen, et al. “Langzeitfestigkeit von Schweißungen Aus PP
Unter Berücksichtigung Der Morphologie.” In Werkstoffwoche (2019). Dresden
(Deutschland), 2019.
ieee: V. Schöppner et al., “Langzeitfestigkeit von Schweißungen aus PP unter
Berücksichtigung der Morphologie,” presented at the Werkstoffwoche (2019), Dresden
(Deutschland), 2019.
mla: Schöppner, Volker, et al. “Langzeitfestigkeit von Schweißungen Aus PP Unter
Berücksichtigung Der Morphologie.” Werkstoffwoche (2019), 2019.
short: 'V. Schöppner, A. Wübbeke, A. Paul, M. Tiemann, F. Fitze, L. Austermeier,
M. Chen, F. Jakob, H.-P. Heim, T. Wu, T. Niendorf, M.-L. Röhricht, M. Schmidt,
in: Werkstoffwoche (2019), Dresden (Deutschland), 2019.'
conference:
location: Dresden (Deutschland)
name: Werkstoffwoche (2019)
date_created: 2021-10-07T09:33:50Z
date_updated: 2023-05-05T10:01:36Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
- _id: '35'
- _id: '2'
- _id: '307'
language:
- iso: eng
place: Dresden (Deutschland)
publication: Werkstoffwoche (2019)
quality_controlled: '1'
status: public
title: Langzeitfestigkeit von Schweißungen aus PP unter Berücksichtigung der Morphologie
type: conference
user_id: '14931'
year: '2019'
...
---
_id: '15068'
author:
- first_name: Eugen
full_name: Wiens, Eugen
id: '7888'
last_name: Wiens
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
citation:
ama: 'Wiens E, Homberg W. Forming analysis of tailored tubes with an internal contoured
wall thickness and external axial ribs manufactured by internal flow-turning.
In: PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING:
ESAFORM 2019. ; 2019. doi:10.1063/1.5112535'
apa: 'Wiens, E., & Homberg, W. (2019). Forming analysis of tailored tubes with
an internal contoured wall thickness and external axial ribs manufactured by internal
flow-turning. PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL
FORMING: ESAFORM 2019. ESAFORM 2019. https://doi.org/10.1063/1.5112535'
bibtex: '@inproceedings{Wiens_Homberg_2019, title={Forming analysis of tailored
tubes with an internal contoured wall thickness and external axial ribs manufactured
by internal flow-turning}, DOI={10.1063/1.5112535},
booktitle={PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL
FORMING: ESAFORM 2019}, author={Wiens, Eugen and Homberg, Werner}, year={2019}
}'
chicago: 'Wiens, Eugen, and Werner Homberg. “Forming Analysis of Tailored Tubes
with an Internal Contoured Wall Thickness and External Axial Ribs Manufactured
by Internal Flow-Turning.” In PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM
CONFERENCE ON MATERIAL FORMING: ESAFORM 2019, 2019. https://doi.org/10.1063/1.5112535.'
ieee: 'E. Wiens and W. Homberg, “Forming analysis of tailored tubes with an internal
contoured wall thickness and external axial ribs manufactured by internal flow-turning,”
presented at the ESAFORM 2019, 2019, doi: 10.1063/1.5112535.'
mla: 'Wiens, Eugen, and Werner Homberg. “Forming Analysis of Tailored Tubes with
an Internal Contoured Wall Thickness and External Axial Ribs Manufactured by Internal
Flow-Turning.” PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON
MATERIAL FORMING: ESAFORM 2019, 2019, doi:10.1063/1.5112535.'
short: 'E. Wiens, W. Homberg, in: PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM
CONFERENCE ON MATERIAL FORMING: ESAFORM 2019, 2019.'
conference:
name: ESAFORM 2019
date_created: 2019-11-20T17:10:45Z
date_updated: 2023-05-05T11:22:57Z
department:
- _id: '156'
doi: 10.1063/1.5112535
language:
- iso: eng
publication: 'PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL
FORMING: ESAFORM 2019'
publication_status: published
quality_controlled: '1'
status: public
title: Forming analysis of tailored tubes with an internal contoured wall thickness
and external axial ribs manufactured by internal flow-turning
type: conference
user_id: '7888'
year: '2019'
...
---
_id: '23907'
abstract:
- lang: eng
text: One of the strategies employed to lower weight and to decrease material
consumption is reducing part thickness itself. Thus, functionally graded materials
in which structural reinforcement is adjusted locally, are of great interest.
With regard to conventional industrial processes, such as extrusion or flexible
cold rolling, thickness variations can only be achieved either longitudinally
or through the cross-section of the semi-finished products. Hence, a combined
thickness variation (along both axes) is difficult to generate solely by extrusion
or rolling. A simultaneous thickness variation in both directions, however, would
enable further weight savings in structural components such as car body parts.
In this study, a promising approach with extruded shapes, serving as a billet
for a flexible hot rolling process, is elaborated upon. By employing the described
process modification, shapes with simultaneous thickness variations in longitudinal
as well as in transverse direction are feasible. Initial numerical analysis reveals
the weight-saving potential of using these semi-finished products for structural
parts in a car body. A demonstration of the production process for the semi-finished
parts and the occurring challenges are discussed. To verify and adjust the new
technology, a numerical model of the flexible hot rolling process has been created
based on the finite element software QForm VX. This model is also employed for
tool design optimization to produce semi-finished components with the required
geometrical quality. Finally, the results of hot rolling experiments conducted
using the adjusted roll design are presented.
author:
- first_name: Olexandr
full_name: Grydin, Olexandr
id: '43822'
last_name: Grydin
- first_name: Nikolay
full_name: Sotirov, Nikolay
last_name: Sotirov
- first_name: Andrii
full_name: Samsonenko, Andrii
last_name: Samsonenko
- first_name: Nikolay
full_name: Biba, Nikolay
last_name: Biba
- first_name: Anatolii
full_name: Andreiev, Anatolii
id: '50215'
last_name: Andreiev
- first_name: Mykhailo
full_name: Stolbchenko, Mykhailo
last_name: Stolbchenko
- first_name: Teresa
full_name: Behr, Teresa
last_name: Behr
- first_name: Iaroslav
full_name: Frolov, Iaroslav
last_name: Frolov
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: Grydin O, Sotirov N, Samsonenko A, et al. Flexible Hot Rolling of Extruded
Shapes of Aluminum Alloy EN AW-6082. Materials Science Forum. Published
online 2019:85-92. doi:10.4028/www.scientific.net/msf.949.85
apa: Grydin, O., Sotirov, N., Samsonenko, A., Biba, N., Andreiev, A., Stolbchenko,
M., Behr, T., Frolov, I., & Schaper, M. (2019). Flexible Hot Rolling of Extruded
Shapes of Aluminum Alloy EN AW-6082. Materials Science Forum, 85–92. https://doi.org/10.4028/www.scientific.net/msf.949.85
bibtex: '@article{Grydin_Sotirov_Samsonenko_Biba_Andreiev_Stolbchenko_Behr_Frolov_Schaper_2019,
title={Flexible Hot Rolling of Extruded Shapes of Aluminum Alloy EN AW-6082},
DOI={10.4028/www.scientific.net/msf.949.85},
journal={Materials Science Forum}, author={Grydin, Olexandr and Sotirov, Nikolay
and Samsonenko, Andrii and Biba, Nikolay and Andreiev, Anatolii and Stolbchenko,
Mykhailo and Behr, Teresa and Frolov, Iaroslav and Schaper, Mirko}, year={2019},
pages={85–92} }'
chicago: Grydin, Olexandr, Nikolay Sotirov, Andrii Samsonenko, Nikolay Biba, Anatolii
Andreiev, Mykhailo Stolbchenko, Teresa Behr, Iaroslav Frolov, and Mirko Schaper.
“Flexible Hot Rolling of Extruded Shapes of Aluminum Alloy EN AW-6082.” Materials
Science Forum, 2019, 85–92. https://doi.org/10.4028/www.scientific.net/msf.949.85.
ieee: 'O. Grydin et al., “Flexible Hot Rolling of Extruded Shapes of Aluminum
Alloy EN AW-6082,” Materials Science Forum, pp. 85–92, 2019, doi: 10.4028/www.scientific.net/msf.949.85.'
mla: Grydin, Olexandr, et al. “Flexible Hot Rolling of Extruded Shapes of Aluminum
Alloy EN AW-6082.” Materials Science Forum, 2019, pp. 85–92, doi:10.4028/www.scientific.net/msf.949.85.
short: O. Grydin, N. Sotirov, A. Samsonenko, N. Biba, A. Andreiev, M. Stolbchenko,
T. Behr, I. Frolov, M. Schaper, Materials Science Forum (2019) 85–92.
date_created: 2021-09-08T07:31:34Z
date_updated: 2023-06-01T14:28:28Z
department:
- _id: '158'
- _id: '321'
doi: 10.4028/www.scientific.net/msf.949.85
language:
- iso: eng
page: 85-92
publication: Materials Science Forum
publication_identifier:
issn:
- 1662-9752
publication_status: published
quality_controlled: '1'
status: public
title: Flexible Hot Rolling of Extruded Shapes of Aluminum Alloy EN AW-6082
type: journal_article
user_id: '43720'
year: '2019'
...
---
_id: '41524'
article_number: '095701'
author:
- first_name: Katja
full_name: Engelkemeier, Katja
id: '21743'
last_name: Engelkemeier
- first_name: Jörg K N
full_name: Lindner, Jörg K N
last_name: Lindner
- first_name: Julius
full_name: Bürger, Julius
id: '46952'
last_name: Bürger
- first_name: Kathrin
full_name: Vaupel, Kathrin
last_name: Vaupel
- first_name: Marc
full_name: Hartmann, Marc
last_name: Hartmann
- first_name: Michael
full_name: Tiemann, Michael
id: '23547'
last_name: Tiemann
orcid: 0000-0003-1711-2722
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: Engelkemeier K, Lindner JKN, Bürger J, et al. Nano-architectural complexity
of zinc oxide nanowall hollow microspheres and their structural properties. Nanotechnology.
2019;31(9). doi:10.1088/1361-6528/ab55bc
apa: Engelkemeier, K., Lindner, J. K. N., Bürger, J., Vaupel, K., Hartmann, M.,
Tiemann, M., Hoyer, K.-P., & Schaper, M. (2019). Nano-architectural complexity
of zinc oxide nanowall hollow microspheres and their structural properties. Nanotechnology,
31(9), Article 095701. https://doi.org/10.1088/1361-6528/ab55bc
bibtex: '@article{Engelkemeier_Lindner_Bürger_Vaupel_Hartmann_Tiemann_Hoyer_Schaper_2019,
title={Nano-architectural complexity of zinc oxide nanowall hollow microspheres
and their structural properties}, volume={31}, DOI={10.1088/1361-6528/ab55bc},
number={9095701}, journal={Nanotechnology}, publisher={IOP Publishing}, author={Engelkemeier,
Katja and Lindner, Jörg K N and Bürger, Julius and Vaupel, Kathrin and Hartmann,
Marc and Tiemann, Michael and Hoyer, Kay-Peter and Schaper, Mirko}, year={2019}
}'
chicago: Engelkemeier, Katja, Jörg K N Lindner, Julius Bürger, Kathrin Vaupel, Marc
Hartmann, Michael Tiemann, Kay-Peter Hoyer, and Mirko Schaper. “Nano-Architectural
Complexity of Zinc Oxide Nanowall Hollow Microspheres and Their Structural Properties.”
Nanotechnology 31, no. 9 (2019). https://doi.org/10.1088/1361-6528/ab55bc.
ieee: 'K. Engelkemeier et al., “Nano-architectural complexity of zinc oxide
nanowall hollow microspheres and their structural properties,” Nanotechnology,
vol. 31, no. 9, Art. no. 095701, 2019, doi: 10.1088/1361-6528/ab55bc.'
mla: Engelkemeier, Katja, et al. “Nano-Architectural Complexity of Zinc Oxide Nanowall
Hollow Microspheres and Their Structural Properties.” Nanotechnology, vol.
31, no. 9, 095701, IOP Publishing, 2019, doi:10.1088/1361-6528/ab55bc.
short: K. Engelkemeier, J.K.N. Lindner, J. Bürger, K. Vaupel, M. Hartmann, M. Tiemann,
K.-P. Hoyer, M. Schaper, Nanotechnology 31 (2019).
date_created: 2023-02-02T14:44:47Z
date_updated: 2023-06-01T14:27:50Z
department:
- _id: '9'
- _id: '158'
doi: 10.1088/1361-6528/ab55bc
intvolume: ' 31'
issue: '9'
keyword:
- Electrical and Electronic Engineering
- Mechanical Engineering
- Mechanics of Materials
- General Materials Science
- General Chemistry
- Bioengineering
language:
- iso: eng
publication: Nanotechnology
publication_identifier:
issn:
- 0957-4484
- 1361-6528
publication_status: published
publisher: IOP Publishing
quality_controlled: '1'
status: public
title: Nano-architectural complexity of zinc oxide nanowall hollow microspheres and
their structural properties
type: journal_article
user_id: '43720'
volume: 31
year: '2019'
...
---
_id: '23900'
author:
- first_name: Olexandr
full_name: Grydin, Olexandr
id: '43822'
last_name: Grydin
- first_name: Anatolii
full_name: Andreiev, Anatolii
id: '50215'
last_name: Andreiev
- first_name: Martin Joachim
full_name: Holzweißig, Martin Joachim
last_name: Holzweißig
- first_name: Christian Johannes
full_name: Rüsing, Christian Johannes
last_name: Rüsing
- first_name: Kristina
full_name: Duschik, Kristina
last_name: Duschik
- first_name: Yaroslav
full_name: Frolov, Yaroslav
last_name: Frolov
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: 'Grydin O, Andreiev A, Holzweißig MJ, et al. Short austenitization treatment
with subsequent press hardening: Correlation between process parameters, microstructure
and mechanical properties. Materials Science and Engineering: A. Published
online 2019:176-195. doi:10.1016/j.msea.2019.02.025'
apa: 'Grydin, O., Andreiev, A., Holzweißig, M. J., Rüsing, C. J., Duschik, K., Frolov,
Y., & Schaper, M. (2019). Short austenitization treatment with subsequent
press hardening: Correlation between process parameters, microstructure and mechanical
properties. Materials Science and Engineering: A, 176–195. https://doi.org/10.1016/j.msea.2019.02.025'
bibtex: '@article{Grydin_Andreiev_Holzweißig_Rüsing_Duschik_Frolov_Schaper_2019,
title={Short austenitization treatment with subsequent press hardening: Correlation
between process parameters, microstructure and mechanical properties}, DOI={10.1016/j.msea.2019.02.025},
journal={Materials Science and Engineering: A}, author={Grydin, Olexandr and Andreiev,
Anatolii and Holzweißig, Martin Joachim and Rüsing, Christian Johannes and Duschik,
Kristina and Frolov, Yaroslav and Schaper, Mirko}, year={2019}, pages={176–195}
}'
chicago: 'Grydin, Olexandr, Anatolii Andreiev, Martin Joachim Holzweißig, Christian
Johannes Rüsing, Kristina Duschik, Yaroslav Frolov, and Mirko Schaper. “Short
Austenitization Treatment with Subsequent Press Hardening: Correlation between
Process Parameters, Microstructure and Mechanical Properties.” Materials Science
and Engineering: A, 2019, 176–95. https://doi.org/10.1016/j.msea.2019.02.025.'
ieee: 'O. Grydin et al., “Short austenitization treatment with subsequent
press hardening: Correlation between process parameters, microstructure and mechanical
properties,” Materials Science and Engineering: A, pp. 176–195, 2019, doi:
10.1016/j.msea.2019.02.025.'
mla: 'Grydin, Olexandr, et al. “Short Austenitization Treatment with Subsequent
Press Hardening: Correlation between Process Parameters, Microstructure and Mechanical
Properties.” Materials Science and Engineering: A, 2019, pp. 176–95, doi:10.1016/j.msea.2019.02.025.'
short: 'O. Grydin, A. Andreiev, M.J. Holzweißig, C.J. Rüsing, K. Duschik, Y. Frolov,
M. Schaper, Materials Science and Engineering: A (2019) 176–195.'
date_created: 2021-09-08T07:30:13Z
date_updated: 2023-06-01T14:28:06Z
department:
- _id: '158'
- _id: '321'
doi: 10.1016/j.msea.2019.02.025
language:
- iso: eng
page: 176-195
publication: 'Materials Science and Engineering: A'
publication_identifier:
issn:
- 0921-5093
publication_status: published
quality_controlled: '1'
status: public
title: 'Short austenitization treatment with subsequent press hardening: Correlation
between process parameters, microstructure and mechanical properties'
type: journal_article
user_id: '43720'
year: '2019'
...
---
_id: '23901'
article_number: '1900134'
author:
- first_name: Olexandr
full_name: Grydin, Olexandr
id: '43822'
last_name: Grydin
- first_name: Anatolii
full_name: Andreiev, Anatolii
id: '50215'
last_name: Andreiev
- first_name: Mergim
full_name: Zogaj, Mergim
last_name: Zogaj
- first_name: Yaroslav
full_name: Frolov, Yaroslav
last_name: Frolov
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: Grydin O, Andreiev A, Zogaj M, Frolov Y, Schaper M. Relationships between Microstructural
and Mechanical Performance on Example of an Air‐Hardening Steel. Advanced Engineering
Materials. Published online 2019. doi:10.1002/adem.201900134
apa: Grydin, O., Andreiev, A., Zogaj, M., Frolov, Y., & Schaper, M. (2019).
Relationships between Microstructural and Mechanical Performance on Example of
an Air‐Hardening Steel. Advanced Engineering Materials, Article 1900134.
https://doi.org/10.1002/adem.201900134
bibtex: '@article{Grydin_Andreiev_Zogaj_Frolov_Schaper_2019, title={Relationships
between Microstructural and Mechanical Performance on Example of an Air‐Hardening
Steel}, DOI={10.1002/adem.201900134},
number={1900134}, journal={Advanced Engineering Materials}, author={Grydin, Olexandr
and Andreiev, Anatolii and Zogaj, Mergim and Frolov, Yaroslav and Schaper, Mirko},
year={2019} }'
chicago: Grydin, Olexandr, Anatolii Andreiev, Mergim Zogaj, Yaroslav Frolov, and
Mirko Schaper. “Relationships between Microstructural and Mechanical Performance
on Example of an Air‐Hardening Steel.” Advanced Engineering Materials,
2019. https://doi.org/10.1002/adem.201900134.
ieee: 'O. Grydin, A. Andreiev, M. Zogaj, Y. Frolov, and M. Schaper, “Relationships
between Microstructural and Mechanical Performance on Example of an Air‐Hardening
Steel,” Advanced Engineering Materials, Art. no. 1900134, 2019, doi: 10.1002/adem.201900134.'
mla: Grydin, Olexandr, et al. “Relationships between Microstructural and Mechanical
Performance on Example of an Air‐Hardening Steel.” Advanced Engineering Materials,
1900134, 2019, doi:10.1002/adem.201900134.
short: O. Grydin, A. Andreiev, M. Zogaj, Y. Frolov, M. Schaper, Advanced Engineering
Materials (2019).
date_created: 2021-09-08T07:30:23Z
date_updated: 2023-06-01T14:28:17Z
department:
- _id: '158'
- _id: '321'
doi: 10.1002/adem.201900134
language:
- iso: eng
publication: Advanced Engineering Materials
publication_identifier:
issn:
- 1438-1656
- 1527-2648
publication_status: published
quality_controlled: '1'
status: public
title: Relationships between Microstructural and Mechanical Performance on Example
of an Air‐Hardening Steel
type: journal_article
user_id: '43720'
year: '2019'
...
---
_id: '36529'
author:
- first_name: Julia
full_name: Bruns, Julia
id: '72183'
last_name: Bruns
orcid: https://orcid.org/0000-0002-6604-5864
- first_name: Hedwig
full_name: Gasteiger, Hedwig
last_name: Gasteiger
citation:
ama: 'Bruns J, Gasteiger H. VimaS_num: Measuring situational perception in mathematics
of early childhood teachers. In: Graven M, Venkat H, Essien A, Vale P, eds. Proceedings
of the 43rd Conference of the International Group for the Psychology of Mathematics
Education. Vol 2. ; 2019:129-136.'
apa: 'Bruns, J., & Gasteiger, H. (2019). VimaS_num: Measuring situational perception
in mathematics of early childhood teachers. In M. Graven, H. Venkat, A. Essien,
& P. Vale (Eds.), Proceedings of the 43rd Conference of the International
Group for the Psychology of Mathematics Education (Vol. 2, pp. 129–136).'
bibtex: '@inproceedings{Bruns_Gasteiger_2019, title={VimaS_num: Measuring situational
perception in mathematics of early childhood teachers}, volume={2}, booktitle={Proceedings
of the 43rd Conference of the International Group for the Psychology of Mathematics
Education}, author={Bruns, Julia and Gasteiger, Hedwig}, editor={Graven, Mellony
and Venkat, Hamsa and Essien, Anthony and Vale, Pamela}, year={2019}, pages={129–136}
}'
chicago: 'Bruns, Julia, and Hedwig Gasteiger. “VimaS_num: Measuring Situational
Perception in Mathematics of Early Childhood Teachers.” In Proceedings of the
43rd Conference of the International Group for the Psychology of Mathematics Education,
edited by Mellony Graven, Hamsa Venkat, Anthony Essien, and Pamela Vale, 2:129–36,
2019.'
ieee: 'J. Bruns and H. Gasteiger, “VimaS_num: Measuring situational perception in
mathematics of early childhood teachers,” in Proceedings of the 43rd Conference
of the International Group for the Psychology of Mathematics Education, Pretoria,
South Africa, 2019, vol. 2, pp. 129–136.'
mla: 'Bruns, Julia, and Hedwig Gasteiger. “VimaS_num: Measuring Situational Perception
in Mathematics of Early Childhood Teachers.” Proceedings of the 43rd Conference
of the International Group for the Psychology of Mathematics Education, edited
by Mellony Graven et al., vol. 2, 2019, pp. 129–36.'
short: 'J. Bruns, H. Gasteiger, in: M. Graven, H. Venkat, A. Essien, P. Vale (Eds.),
Proceedings of the 43rd Conference of the International Group for the Psychology
of Mathematics Education, 2019, pp. 129–136.'
conference:
location: Pretoria, South Africa
name: 43rd Conference of the International Group for the Psychology of Mathematics
Education
date_created: 2023-01-13T08:51:58Z
date_updated: 2023-06-20T19:05:48Z
department:
- _id: '611'
- _id: '97'
editor:
- first_name: Mellony
full_name: Graven, Mellony
last_name: Graven
- first_name: Hamsa
full_name: Venkat, Hamsa
last_name: Venkat
- first_name: Anthony
full_name: Essien, Anthony
last_name: Essien
- first_name: Pamela
full_name: Vale, Pamela
last_name: Vale
intvolume: ' 2'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.igpme.org/publications/current-proceedings/
oa: '1'
page: 129-136
publication: Proceedings of the 43rd Conference of the International Group for the
Psychology of Mathematics Education
publication_status: published
quality_controlled: '1'
status: public
title: 'VimaS_num: Measuring situational perception in mathematics of early childhood
teachers'
type: conference
user_id: '49063'
volume: 2
year: '2019'
...