---
_id: '1771'
abstract:
- lang: ger
text: Die (Wieder-)Einführung einer Vermögensteuer ist in den vergangenen Jahren
erneut in den Fokus der politischen Diskussion gerückt. Der vorliegende Beitrag
vermittelt einen Eindruck von den Belastungswirkungen, die aus der Umsetzung von
aktuell vorliegenden Besteuerungskonzepten resultieren würden. Auf der Basis von
realen Jahresabschlussdaten wird eine mehrperiodige Veranlagungssimulation durchgeführt,
die insbesondere ermöglicht, den zu erwartenden Eigenkapitalverzehr sowie den
Anstieg der Steuerbelastung für die betrachtete Stichprobe zu quantifizieren.
Von besonderem Interesse sind hierbei Unternehmen, deren laufende Erträge nicht
ausreichen, um die Belastungen durch die Vermögensteuer zu tragen und damit einem
Substanzverzehr ausgesetzt sind. Es zeigt sich, dass etwa die Hälfte der Unternehmen
im Untersuchungszeitraum von sechs Jahren in mindestens einem Jahr einen Substanzverzehr
erfährt. Der Vermögensteuer kommt somit keinesfalls der vielfach postulierte Charakter
einer eher mäßig belastenden und im Wesentlichen substanzverschonenden Steuer
zu. Zusatzbelastungen von knapp 100 bis zu 300 % der Ertragsteuerlast sind keine
Seltenheit und veranschaulichen das Gefährdungspotenzial dieser Steuer für den
Wirtschaftsstandort Deutschland.
- lang: eng
text: The (re-)introduction of a wealth tax has again become the subject of political
debate in recent years. This paper analyzes the impact of implementing the concepts
under discussion on the overall tax burden and on companies’ equity. Simulating
a tax assessment based on real annual financial statement data from German listed
firms in a multi-period setting, we quantify the expected equity erosion as well
as the increase in the tax burden for the companies in our sample that is induced
by wealth taxation at the corporate and shareholder level. Special attention is
given to companies whose current yield is very low and thus would have to take
additional loans or liquidate assets to settle their wealth tax bill. Our findings
indicate that around half of the companies would suffer from wealth tax-induced
asset erosion in at least one year within the six-year period under review. In
contrast to the usually postulated moderate effects of a wealth tax on firms,
we find evidence that the additional burden arising from wealth taxation could
realistically range from nearly 100 to 300 % of the profit tax burden, highlighting
the magnitude of risk associated with wealth taxation for Germany as a business
location.
article_type: original
author:
- first_name: Thomas
full_name: Hoppe, Thomas
id: '22671'
last_name: Hoppe
- first_name: Ralf
full_name: Maiterth, Ralf
last_name: Maiterth
- first_name: Caren
full_name: Sureth-Sloane, Caren
id: '530'
last_name: Sureth-Sloane
citation:
ama: Hoppe T, Maiterth R, Sureth-Sloane C. Eigenkapitalverzehr und Substanzbesteuerung
deutscher Unternehmen durch eine Vermögensteuer – eine empirische Analyse. Schmalenbachs
Zeitschrift für betriebswirtschaftliche Forschung. 2016;68(1):3-45. doi:10.1007/s41471-016-0005-x
apa: Hoppe, T., Maiterth, R., & Sureth-Sloane, C. (2016). Eigenkapitalverzehr
und Substanzbesteuerung deutscher Unternehmen durch eine Vermögensteuer – eine
empirische Analyse. Schmalenbachs Zeitschrift für betriebswirtschaftliche Forschung,
68(1), 3–45. https://doi.org/10.1007/s41471-016-0005-x
bibtex: '@article{Hoppe_Maiterth_Sureth-Sloane_2016, title={Eigenkapitalverzehr
und Substanzbesteuerung deutscher Unternehmen durch eine Vermögensteuer – eine
empirische Analyse}, volume={68}, DOI={10.1007/s41471-016-0005-x},
number={1}, journal={Schmalenbachs Zeitschrift für betriebswirtschaftliche Forschung},
publisher={Springer Nature}, author={Hoppe, Thomas and Maiterth, Ralf and Sureth-Sloane,
Caren}, year={2016}, pages={3–45} }'
chicago: 'Hoppe, Thomas, Ralf Maiterth, and Caren Sureth-Sloane. “Eigenkapitalverzehr
und Substanzbesteuerung deutscher Unternehmen durch eine Vermögensteuer – eine
empirische Analyse.” Schmalenbachs Zeitschrift für betriebswirtschaftliche
Forschung 68, no. 1 (2016): 3–45. https://doi.org/10.1007/s41471-016-0005-x.'
ieee: T. Hoppe, R. Maiterth, and C. Sureth-Sloane, “Eigenkapitalverzehr und Substanzbesteuerung
deutscher Unternehmen durch eine Vermögensteuer – eine empirische Analyse,” Schmalenbachs
Zeitschrift für betriebswirtschaftliche Forschung, vol. 68, no. 1, pp. 3–45,
2016.
mla: Hoppe, Thomas, et al. “Eigenkapitalverzehr und Substanzbesteuerung deutscher
Unternehmen durch eine Vermögensteuer – eine empirische Analyse.” Schmalenbachs
Zeitschrift für betriebswirtschaftliche Forschung, vol. 68, no. 1, Springer
Nature, 2016, pp. 3–45, doi:10.1007/s41471-016-0005-x.
short: T. Hoppe, R. Maiterth, C. Sureth-Sloane, Schmalenbachs Zeitschrift für betriebswirtschaftliche
Forschung 68 (2016) 3–45.
date_created: 2018-03-23T14:04:24Z
date_updated: 2022-01-06T06:53:17Z
department:
- _id: '187'
- _id: '635'
doi: 10.1007/s41471-016-0005-x
intvolume: ' 68'
issue: '1'
jel:
- H21
- H24
- H25
- C54
keyword:
- Steuerbelastung
- Substanzbesteuerung
- Ungleiche Vermögensverteilung
- Veranlagungssimulation
- Vermögensteuer
language:
- iso: ger
main_file_link:
- open_access: '1'
url: http://www.readcube.com/articles/10.1007/s41471-016-0005-x?author_access_token=L8vhVZMucjlu5odLLLHaG_e4RwlQNchNByi7wbcMAY5B6ptZT4XXH6IBMbZTagA_06jUOTCNV-Pbh1ByfL_RaVCn-T_JbY5z17HM1rzPS9lXyW_vKKYXJAuZZglAbTRQbk33DRwc7ZJZc9Cl6TcFuA%3D%3D
oa: '1'
page: 3-45
publication: Schmalenbachs Zeitschrift für betriebswirtschaftliche Forschung
publication_identifier:
issn:
- 0341-2687
- 2366-6153
publication_status: published
publisher: Springer Nature
quality_controlled: '1'
status: public
title: Eigenkapitalverzehr und Substanzbesteuerung deutscher Unternehmen durch eine
Vermögensteuer – eine empirische Analyse
type: journal_article
user_id: '61801'
volume: 68
year: '2016'
...
---
_id: '191'
abstract:
- lang: eng
text: One purpose of requirement refinement is that higher-level requirements have
to be translated to something usable by developers. Since customer requirements
are often written in natural language by end users, they lack precision, completeness
and consistency. Although user stories are often used in the requirement elicitation
process in order to describe the possibilities how to interact with the software,
there is always something unspoken. Here, we present techniques how to automatically
refine vague software descriptions. Thus, we can bridge the gap by first revising
natural language utterances from higher-level to more detailed customer requirements,
before functionality matters. We therefore focus on the resolution of semantically
incomplete user-generated sentences (i.e. non-instantiated arguments of predicates)
and provide ontology-based gap-filling suggestions how to complete unverbalized
information in the user’s demand.
author:
- first_name: Michaela
full_name: Geierhos, Michaela
id: '42496'
last_name: Geierhos
orcid: 0000-0002-8180-5606
- first_name: Frederik Simon
full_name: Bäumer, Frederik Simon
id: '38837'
last_name: Bäumer
citation:
ama: 'Geierhos M, Bäumer FS. How to Complete Customer Requirements: Using Concept
Expansion for Requirement Refinement. In: Métais E, Meziane F, Saraee M, Sugumaran
V, Vadera S, eds. Proceedings of the 21st International Conference on Applications
of Natural Language to Information Systems (NLDB). Vol 9612. Lecture Notes
in Computer Science. Cham, Switzerland: Springer; 2016:37-47. doi:10.1007/978-3-319-41754-7_4'
apa: 'Geierhos, M., & Bäumer, F. S. (2016). How to Complete Customer Requirements:
Using Concept Expansion for Requirement Refinement. In E. Métais, F. Meziane,
M. Saraee, V. Sugumaran, & S. Vadera (Eds.), Proceedings of the 21st International
Conference on Applications of Natural Language to Information Systems (NLDB)
(Vol. 9612, pp. 37–47). Cham, Switzerland: Springer. https://doi.org/10.1007/978-3-319-41754-7_4'
bibtex: '@inproceedings{Geierhos_Bäumer_2016, place={Cham, Switzerland}, series={Lecture
Notes in Computer Science}, title={How to Complete Customer Requirements: Using
Concept Expansion for Requirement Refinement}, volume={9612}, DOI={10.1007/978-3-319-41754-7_4},
booktitle={Proceedings of the 21st International Conference on Applications of
Natural Language to Information Systems (NLDB)}, publisher={Springer}, author={Geierhos,
Michaela and Bäumer, Frederik Simon}, editor={Métais, Elisabeth and Meziane,
Farid and Saraee, Mohamad and Sugumaran, Vijayan and Vadera, Sunil Editors},
year={2016}, pages={37–47}, collection={Lecture Notes in Computer Science} }'
chicago: 'Geierhos, Michaela, and Frederik Simon Bäumer. “How to Complete Customer
Requirements: Using Concept Expansion for Requirement Refinement.” In Proceedings
of the 21st International Conference on Applications of Natural Language to Information
Systems (NLDB), edited by Elisabeth Métais, Farid Meziane, Mohamad Saraee,
Vijayan Sugumaran, and Sunil Vadera, 9612:37–47. Lecture Notes in Computer Science.
Cham, Switzerland: Springer, 2016. https://doi.org/10.1007/978-3-319-41754-7_4.'
ieee: 'M. Geierhos and F. S. Bäumer, “How to Complete Customer Requirements: Using
Concept Expansion for Requirement Refinement,” in Proceedings of the 21st International
Conference on Applications of Natural Language to Information Systems (NLDB),
Salford, UK, 2016, vol. 9612, pp. 37–47.'
mla: 'Geierhos, Michaela, and Frederik Simon Bäumer. “How to Complete Customer Requirements:
Using Concept Expansion for Requirement Refinement.” Proceedings of the 21st
International Conference on Applications of Natural Language to Information Systems
(NLDB), edited by Elisabeth Métais et al., vol. 9612, Springer, 2016, pp.
37–47, doi:10.1007/978-3-319-41754-7_4.'
short: 'M. Geierhos, F.S. Bäumer, in: E. Métais, F. Meziane, M. Saraee, V. Sugumaran,
S. Vadera (Eds.), Proceedings of the 21st International Conference on Applications
of Natural Language to Information Systems (NLDB), Springer, Cham, Switzerland,
2016, pp. 37–47.'
conference:
end_date: 2016-06-24
location: Salford, UK
name: 21st International Conference on Applications of Natural Language to Information
Systems (NLDB 2016)
start_date: 2016-06-22
date_created: 2017-10-17T12:41:29Z
date_updated: 2022-01-06T06:53:58Z
ddc:
- '040'
department:
- _id: '36'
- _id: '1'
- _id: '579'
doi: 10.1007/978-3-319-41754-7_4
editor:
- first_name: 'Elisabeth '
full_name: 'Métais, Elisabeth '
last_name: Métais
- first_name: 'Farid '
full_name: 'Meziane, Farid '
last_name: Meziane
- first_name: 'Mohamad '
full_name: 'Saraee, Mohamad '
last_name: Saraee
- first_name: 'Vijayan '
full_name: 'Sugumaran, Vijayan '
last_name: Sugumaran
- first_name: 'Sunil '
full_name: 'Vadera, Sunil '
last_name: Vadera
file:
- access_level: closed
content_type: application/pdf
creator: florida
date_created: 2018-03-21T12:29:37Z
date_updated: 2018-03-21T12:29:37Z
file_id: '1528'
file_name: 191-chp_3A10.1007_2F978-3-319-41754-7_4.pdf
file_size: 1499075
relation: main_file
success: 1
file_date_updated: 2018-03-21T12:29:37Z
has_accepted_license: '1'
intvolume: ' 9612'
keyword:
- Requirement refinement
- Concept expansion
- Ontology-based instantiation of predicate-argument structure
language:
- iso: eng
page: 37-47
place: Cham, Switzerland
project:
- _id: '1'
name: SFB 901
- _id: '3'
name: SFB 901 - Project Area B
- _id: '9'
name: SFB 901 - Subproject B1
publication: Proceedings of the 21st International Conference on Applications of Natural
Language to Information Systems (NLDB)
publication_identifier:
eisbn:
- 978-3-319-41754-7
isbn:
- 978-3-319-41753-0
publication_status: published
publisher: Springer
quality_controlled: '1'
series_title: Lecture Notes in Computer Science
status: public
title: 'How to Complete Customer Requirements: Using Concept Expansion for Requirement
Refinement'
type: conference
user_id: '477'
volume: 9612
year: '2016'
...
---
_id: '23754'
author:
- first_name: Sabine
full_name: Fechner, Sabine
id: '54823'
last_name: Fechner
orcid: 0000-0001-5645-5870
- first_name: Yvonne
full_name: Dettweiler, Yvonne
last_name: Dettweiler
- first_name: Bernhard
full_name: Sieve, Bernhard
last_name: Sieve
- first_name: Nina
full_name: Ulrich, Nina
last_name: Ulrich
- first_name: Dominic
full_name: Böhm, Dominic
last_name: Böhm
- first_name: Sascha
full_name: Schanze, Sascha
last_name: Schanze
citation:
ama: Fechner S, Dettweiler Y, Sieve B, Ulrich N, Böhm D, Schanze S. Egg-races als
gesellschaftsfähige naturwissenschaftliche Wettbewerbe für jedermann? CHEMKON.
2016;23(2):71-78. doi:10.1002/ckon.201610270
apa: Fechner, S., Dettweiler, Y., Sieve, B., Ulrich, N., Böhm, D., & Schanze,
S. (2016). Egg-races als gesellschaftsfähige naturwissenschaftliche Wettbewerbe
für jedermann? CHEMKON, 23(2), 71–78. https://doi.org/10.1002/ckon.201610270
bibtex: '@article{Fechner_Dettweiler_Sieve_Ulrich_Böhm_Schanze_2016, title={Egg-races
als gesellschaftsfähige naturwissenschaftliche Wettbewerbe für jedermann?}, volume={23},
DOI={10.1002/ckon.201610270},
number={2}, journal={CHEMKON}, author={Fechner, Sabine and Dettweiler, Yvonne
and Sieve, Bernhard and Ulrich, Nina and Böhm, Dominic and Schanze, Sascha}, year={2016},
pages={71–78} }'
chicago: 'Fechner, Sabine, Yvonne Dettweiler, Bernhard Sieve, Nina Ulrich, Dominic
Böhm, and Sascha Schanze. “Egg-races als gesellschaftsfähige naturwissenschaftliche
Wettbewerbe für jedermann?” CHEMKON 23, no. 2 (2016): 71–78. https://doi.org/10.1002/ckon.201610270.'
ieee: S. Fechner, Y. Dettweiler, B. Sieve, N. Ulrich, D. Böhm, and S. Schanze, “Egg-races
als gesellschaftsfähige naturwissenschaftliche Wettbewerbe für jedermann?,” CHEMKON,
vol. 23, no. 2, pp. 71–78, 2016.
mla: Fechner, Sabine, et al. “Egg-races als gesellschaftsfähige naturwissenschaftliche
Wettbewerbe für jedermann?” CHEMKON, vol. 23, no. 2, 2016, pp. 71–78, doi:10.1002/ckon.201610270.
short: S. Fechner, Y. Dettweiler, B. Sieve, N. Ulrich, D. Böhm, S. Schanze, CHEMKON
23 (2016) 71–78.
date_created: 2021-09-03T12:23:56Z
date_updated: 2022-01-06T06:55:59Z
department:
- _id: '386'
doi: 10.1002/ckon.201610270
intvolume: ' 23'
issue: '2'
language:
- iso: ger
page: 71-78
publication: CHEMKON
publication_identifier:
issn:
- 0944-5846
publication_status: published
quality_controlled: '1'
status: public
title: Egg-races als gesellschaftsfähige naturwissenschaftliche Wettbewerbe für jedermann?
type: journal_article
user_id: '54823'
volume: 23
year: '2016'
...
---
_id: '5762'
abstract:
- lang: eng
text: "This paper introduces the problem of communication pattern adaption for a
distributed self-adjusting binary search tree. We propose a simple local algorithm
that is closely related to the over thirty-year-old idea of splay trees and evaluate
its adaption performance in the distributed scenario if different communication
patterns are provided. \r\nTo do so, the process of self-adjustment is modeled
similarly to a basic network creation game in which the nodes want to communicate
with only a certain subset of all nodes. \r\nWe show that, in general, the game
(i.e., the process of local adjustments) does not converge, and that convergence
is related to certain structures of the communication interests, which we call
conflicts. \r\nWe classify conflicts and show that for two communication scenarios
in which convergence is guaranteed, the self-adjusting tree performs well. \r\nFurthermore,
we investigate the different classes of conflicts separately and show that, for
a certain class of conflicts, the performance of the tree network is asymptotically
as good as the performance for converging instances.\r\nHowever, for the other
conflict classes, a distributed self-adjusting binary search tree adapts poorly."
author:
- first_name: Thim Frederik
full_name: Strothmann, Thim Frederik
id: '11319'
last_name: Strothmann
citation:
ama: Strothmann TF. The Impact of Communication Patterns on Distributed Self-Adjusting
Binary Search Tree. Journal of Graph Algorithms and Applications. 2016;20(1):79-100.
doi:10.7155/jgaa.00385
apa: Strothmann, T. F. (2016). The Impact of Communication Patterns on Distributed
Self-Adjusting Binary Search Tree. Journal of Graph Algorithms and Applications,
20(1), 79–100. https://doi.org/10.7155/jgaa.00385
bibtex: '@article{Strothmann_2016, title={The Impact of Communication Patterns on
Distributed Self-Adjusting Binary Search Tree}, volume={20}, DOI={10.7155/jgaa.00385},
number={1}, journal={Journal of Graph Algorithms and Applications}, publisher={Journal
of Graph Algorithms and Applications}, author={Strothmann, Thim Frederik}, year={2016},
pages={79–100} }'
chicago: 'Strothmann, Thim Frederik. “The Impact of Communication Patterns on Distributed
Self-Adjusting Binary Search Tree.” Journal of Graph Algorithms and Applications
20, no. 1 (2016): 79–100. https://doi.org/10.7155/jgaa.00385.'
ieee: T. F. Strothmann, “The Impact of Communication Patterns on Distributed Self-Adjusting
Binary Search Tree,” Journal of Graph Algorithms and Applications, vol.
20, no. 1, pp. 79–100, 2016.
mla: Strothmann, Thim Frederik. “The Impact of Communication Patterns on Distributed
Self-Adjusting Binary Search Tree.” Journal of Graph Algorithms and Applications,
vol. 20, no. 1, Journal of Graph Algorithms and Applications, 2016, pp. 79–100,
doi:10.7155/jgaa.00385.
short: T.F. Strothmann, Journal of Graph Algorithms and Applications 20 (2016) 79–100.
date_created: 2018-11-19T15:33:50Z
date_updated: 2022-01-06T07:02:38Z
ddc:
- '040'
department:
- _id: '79'
doi: 10.7155/jgaa.00385
file:
- access_level: closed
content_type: application/pdf
creator: thim
date_created: 2018-11-27T11:58:08Z
date_updated: 2018-11-27T11:58:08Z
file_id: '5912'
file_name: Strothmann2016.20.1.pdf
file_size: 2324066
relation: main_file
success: 1
file_date_updated: 2018-11-27T11:58:08Z
has_accepted_license: '1'
intvolume: ' 20'
issue: '1'
language:
- iso: eng
page: 79-100
project:
- _id: '1'
name: SFB 901
- _id: '2'
name: SFB 901 - Project Area A
- _id: '5'
name: SFB 901 - Subproject A1
publication: Journal of Graph Algorithms and Applications
publication_identifier:
issn:
- 1526-1719
publication_status: published
publisher: Journal of Graph Algorithms and Applications
quality_controlled: '1'
status: public
title: The Impact of Communication Patterns on Distributed Self-Adjusting Binary Search
Tree
type: journal_article
user_id: '477'
volume: 20
year: '2016'
...
---
_id: '8565'
author:
- first_name: Michael
full_name: Liebendörfer, Michael
id: '30933'
last_name: Liebendörfer
orcid: 0000-0001-9887-2074
- first_name: Robin
full_name: Göller, Robin
last_name: Göller
citation:
ama: 'Liebendörfer M, Göller R. Abschreiben - ein Problem in mathematischen Lehrveranstaltungen?
In: Paravicini W, Schnieder J, eds. Hanse-Kolloquium Zur Hochschuldidaktik
Der Mathematik 2014 Beiträge Zum Gleichnamigen Symposium Am 7. & 8. November
2014 an Der Westfälischen Wilhelms-Universität Münster. Münster: WTM-Verlag
für wissenschaftliche Texte und Medien; 2016:119-141.'
apa: 'Liebendörfer, M., & Göller, R. (2016). Abschreiben - ein Problem in mathematischen
Lehrveranstaltungen? In W. Paravicini & J. Schnieder (Eds.), Hanse-Kolloquium
zur Hochschuldidaktik der Mathematik 2014 Beiträge zum gleichnamigen Symposium
am 7. & 8. November 2014 an der Westfälischen Wilhelms-Universität Münster
(pp. 119–141). Münster: WTM-Verlag für wissenschaftliche Texte und Medien.'
bibtex: '@inbook{Liebendörfer_Göller_2016, place={Münster}, title={Abschreiben -
ein Problem in mathematischen Lehrveranstaltungen?}, booktitle={Hanse-Kolloquium
zur Hochschuldidaktik der Mathematik 2014 Beiträge zum gleichnamigen Symposium
am 7. & 8. November 2014 an der Westfälischen Wilhelms-Universität Münster},
publisher={WTM-Verlag für wissenschaftliche Texte und Medien}, author={Liebendörfer,
Michael and Göller, Robin}, editor={Paravicini, Walther and Schnieder, JörnEditors},
year={2016}, pages={119–141} }'
chicago: 'Liebendörfer, Michael, and Robin Göller. “Abschreiben - Ein Problem in
Mathematischen Lehrveranstaltungen?” In Hanse-Kolloquium Zur Hochschuldidaktik
Der Mathematik 2014 Beiträge Zum Gleichnamigen Symposium Am 7. & 8. November
2014 an Der Westfälischen Wilhelms-Universität Münster, edited by Walther
Paravicini and Jörn Schnieder, 119–41. Münster: WTM-Verlag für wissenschaftliche
Texte und Medien, 2016.'
ieee: 'M. Liebendörfer and R. Göller, “Abschreiben - ein Problem in mathematischen
Lehrveranstaltungen?,” in Hanse-Kolloquium zur Hochschuldidaktik der Mathematik
2014 Beiträge zum gleichnamigen Symposium am 7. & 8. November 2014 an der
Westfälischen Wilhelms-Universität Münster, W. Paravicini and J. Schnieder,
Eds. Münster: WTM-Verlag für wissenschaftliche Texte und Medien, 2016, pp. 119–141.'
mla: Liebendörfer, Michael, and Robin Göller. “Abschreiben - Ein Problem in Mathematischen
Lehrveranstaltungen?” Hanse-Kolloquium Zur Hochschuldidaktik Der Mathematik
2014 Beiträge Zum Gleichnamigen Symposium Am 7. & 8. November 2014 an Der
Westfälischen Wilhelms-Universität Münster, edited by Walther Paravicini and
Jörn Schnieder, WTM-Verlag für wissenschaftliche Texte und Medien, 2016, pp. 119–41.
short: 'M. Liebendörfer, R. Göller, in: W. Paravicini, J. Schnieder (Eds.), Hanse-Kolloquium
Zur Hochschuldidaktik Der Mathematik 2014 Beiträge Zum Gleichnamigen Symposium
Am 7. & 8. November 2014 an Der Westfälischen Wilhelms-Universität Münster,
WTM-Verlag für wissenschaftliche Texte und Medien, Münster, 2016, pp. 119–141.'
date_created: 2019-03-25T15:35:30Z
date_updated: 2022-01-06T07:03:57Z
department:
- _id: '10'
editor:
- first_name: Walther
full_name: Paravicini, Walther
last_name: Paravicini
- first_name: Jörn
full_name: Schnieder, Jörn
last_name: Schnieder
extern: '1'
language:
- iso: eng
page: 119-141
place: Münster
publication: Hanse-Kolloquium zur Hochschuldidaktik der Mathematik 2014 Beiträge zum
gleichnamigen Symposium am 7. & 8. November 2014 an der Westfälischen Wilhelms-Universität
Münster
publication_identifier:
isbn:
- 978-3-942197-99-1
publisher: WTM-Verlag für wissenschaftliche Texte und Medien
quality_controlled: '1'
status: public
title: Abschreiben - ein Problem in mathematischen Lehrveranstaltungen?
type: book_chapter
user_id: '30933'
year: '2016'
...
---
_id: '9955'
abstract:
- lang: eng
text: Wire bonding has been an established packaging technology for decades. When
introducing copper as wire material for high power applications, adaptations to
the bonding process and to machines became necessary. Here, challenges occur due
to the stiffer wire material and changing oxide layers on the contact partners.
To achieve sufficient process stability, a clean bond area is required, which
can only be achieved with high shear stresses in the contact partners surfaces.
These necessitate high normal forces to plastically deform the wire and substrate.
To achieve such high stresses in the contact area, the bonding tool needs to be
able to transmit the needed tangential forces to the top side of the wire. The
wire itself performs a shear movement and transmits the force into the contact
area to clean the contaminant and oxide layers and to level the desired bond surfaces.
The main function of the tool is to transmit these forces. If the bond tool can
only transmit low forces in the direction of excitation, the parameter space for
a stable bond process is severely restricted. Here, a modeling approach to estimate
how well different tool shapes meet the demand of transmitting high tangential
forces is presented. The model depends on wire deformation and thus on the ultrasonic
softening effect.
author:
- first_name: Simon
full_name: Althoff, Simon
last_name: Althoff
- first_name: Tobias
full_name: Meyer, Tobias
last_name: Meyer
- first_name: Andreas
full_name: Unger, Andreas
last_name: Unger
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
- first_name: Florian
full_name: Eacock, Florian
last_name: Eacock
citation:
ama: 'Althoff S, Meyer T, Unger A, Sextro W, Eacock F. Shape-Dependent Transmittable
Tangential Force of Wire Bond Tools. In: IEEE 66th Electronic Components and
Technology Conference. ; 2016:2103-2110. doi:10.1109/ECTC.2016.234'
apa: Althoff, S., Meyer, T., Unger, A., Sextro, W., & Eacock, F. (2016). Shape-Dependent
Transmittable Tangential Force of Wire Bond Tools. In IEEE 66th Electronic
Components and Technology Conference (pp. 2103–2110). https://doi.org/10.1109/ECTC.2016.234
bibtex: '@inproceedings{Althoff_Meyer_Unger_Sextro_Eacock_2016, title={Shape-Dependent
Transmittable Tangential Force of Wire Bond Tools}, DOI={10.1109/ECTC.2016.234},
booktitle={IEEE 66th Electronic Components and Technology Conference}, author={Althoff,
Simon and Meyer, Tobias and Unger, Andreas and Sextro, Walter and Eacock, Florian},
year={2016}, pages={2103–2110} }'
chicago: Althoff, Simon, Tobias Meyer, Andreas Unger, Walter Sextro, and Florian
Eacock. “Shape-Dependent Transmittable Tangential Force of Wire Bond Tools.” In
IEEE 66th Electronic Components and Technology Conference, 2103–10, 2016.
https://doi.org/10.1109/ECTC.2016.234.
ieee: S. Althoff, T. Meyer, A. Unger, W. Sextro, and F. Eacock, “Shape-Dependent
Transmittable Tangential Force of Wire Bond Tools,” in IEEE 66th Electronic
Components and Technology Conference, 2016, pp. 2103–2110.
mla: Althoff, Simon, et al. “Shape-Dependent Transmittable Tangential Force of Wire
Bond Tools.” IEEE 66th Electronic Components and Technology Conference,
2016, pp. 2103–10, doi:10.1109/ECTC.2016.234.
short: 'S. Althoff, T. Meyer, A. Unger, W. Sextro, F. Eacock, in: IEEE 66th Electronic
Components and Technology Conference, 2016, pp. 2103–2110.'
date_created: 2019-05-27T08:47:52Z
date_updated: 2020-05-07T05:33:52Z
department:
- _id: '151'
doi: 10.1109/ECTC.2016.234
keyword:
- finite element simulation
- wire bonding
- tool geometry
language:
- iso: eng
page: 2103-2110
project:
- _id: '92'
grant_number: 02 PQ2210
name: Intelligente Herstellung zuverlässiger Kupferbondverbindungen
publication: IEEE 66th Electronic Components and Technology Conference
quality_controlled: '1'
status: public
title: Shape-Dependent Transmittable Tangential Force of Wire Bond Tools
type: conference
user_id: '210'
year: '2016'
...
---
_id: '9959'
abstract:
- lang: eng
text: Ultrasonic heavy wire bonding is a commonly used technology to conduct electrical
devices in power electronics. In order to facilitate powerful solutions combined
with an increased efficiency, involving a material change from aluminum to copper
wire as conductor material takes place in recent years. Due to the material related
properties, copper wire bonding requires significant higher bond processing parameters
such as bond force and ultrasonic power compared to aluminum which can lead to
damages or a failure of the bonded component. Therefore, a profound knowledge
of the processes prevailing during wire bonding is essential to optimize the application
of the copper wires and consequently to achieve the demands on quality and reliability.
The behavior of different natural surface oxides of aluminum and copper are assumed
to be one reason for the deviation in the required bond parameters. Accordingly,
the impact of differently pre-treated substrates surfaces on which the bonding
is applied were investigated in this study. First, all conditions investigated
(as-received, oxidefree, AlOx and the CuOx) were characterized by utilizing scanning
electron microscopy, energy dispersive X-ray spectroscopy, focused ion beam microscopy
and atomic force microscopy. In addition, hardness tests were performed as well
as perthometer measurements. Afterwards, a 500 $\mu$ m copper wire was bonded
on the generated surfaces investigated. In consideration of the roughness, shear
test of various bond times and microscopic images were evaluated. Finally, the
results were compared and discussed. Overall, the current study indicates that
an Al-oxide layer is beneficial for welding process in Cu wire bonding. On the
contrary, the Cu-oxide is detrimental and leads to a delayed welding of the joining
parts. Based on the obtained results, it can be expected that due to an ideal
set of Al-oxide layers, lower optimal bond parameters can used to reach high bond
strength with good reliability properties.
author:
- first_name: Florian
full_name: Eacock, Florian
last_name: Eacock
- first_name: Andreas
full_name: Unger, Andreas
last_name: Unger
- first_name: Paul
full_name: Eichwald, Paul
last_name: Eichwald
- first_name: Olexandr
full_name: Grydin, Olexandr
last_name: Grydin
- first_name: Florian
full_name: Hengsbach, Florian
last_name: Hengsbach
- first_name: Simon
full_name: Althoff, Simon
last_name: Althoff
- first_name: Mirko
full_name: Schaper, Mirko
last_name: Schaper
- first_name: Karsten
full_name: Guth, Karsten
last_name: Guth
citation:
ama: 'Eacock F, Unger A, Eichwald P, et al. Effect of different oxide layers on
the ultrasonic copper wire bond process. In: IEEE 66th Electronic Components
and Technology Conference. ; 2016:2111-2118. doi:10.1109/ECTC.2016.91'
apa: Eacock, F., Unger, A., Eichwald, P., Grydin, O., Hengsbach, F., Althoff, S.,
… Guth, K. (2016). Effect of different oxide layers on the ultrasonic copper wire
bond process. In IEEE 66th Electronic Components and Technology Conference
(pp. 2111–2118). https://doi.org/10.1109/ECTC.2016.91
bibtex: '@inproceedings{Eacock_Unger_Eichwald_Grydin_Hengsbach_Althoff_Schaper_Guth_2016,
title={Effect of different oxide layers on the ultrasonic copper wire bond process},
DOI={10.1109/ECTC.2016.91},
booktitle={IEEE 66th Electronic Components and Technology Conference}, author={Eacock,
Florian and Unger, Andreas and Eichwald, Paul and Grydin, Olexandr and Hengsbach,
Florian and Althoff, Simon and Schaper, Mirko and Guth, Karsten}, year={2016},
pages={2111–2118} }'
chicago: Eacock, Florian, Andreas Unger, Paul Eichwald, Olexandr Grydin, Florian
Hengsbach, Simon Althoff, Mirko Schaper, and Karsten Guth. “Effect of Different
Oxide Layers on the Ultrasonic Copper Wire Bond Process.” In IEEE 66th Electronic
Components and Technology Conference, 2111–18, 2016. https://doi.org/10.1109/ECTC.2016.91.
ieee: F. Eacock et al., “Effect of different oxide layers on the ultrasonic
copper wire bond process,” in IEEE 66th Electronic Components and Technology
Conference, 2016, pp. 2111–2118.
mla: Eacock, Florian, et al. “Effect of Different Oxide Layers on the Ultrasonic
Copper Wire Bond Process.” IEEE 66th Electronic Components and Technology Conference,
2016, pp. 2111–18, doi:10.1109/ECTC.2016.91.
short: 'F. Eacock, A. Unger, P. Eichwald, O. Grydin, F. Hengsbach, S. Althoff, M.
Schaper, K. Guth, in: IEEE 66th Electronic Components and Technology Conference,
2016, pp. 2111–2118.'
date_created: 2019-05-27T09:00:50Z
date_updated: 2019-09-16T10:38:59Z
department:
- _id: '151'
doi: 10.1109/ECTC.2016.91
keyword:
- Ultrasonic copper wire bonding
- Al-oxide
- Cuoxide
- oxide-free
- roughness
- morphology
language:
- iso: eng
page: 2111-2118
publication: IEEE 66th Electronic Components and Technology Conference
quality_controlled: '1'
status: public
title: Effect of different oxide layers on the ultrasonic copper wire bond process
type: conference
user_id: '55222'
year: '2016'
...
---
_id: '9960'
abstract:
- lang: eng
text: Ultrasonic wire bonding is a common technology for connecting electrodes of
electronic components like power modules. Nowadays, bond connections are often
made of copper instead of aluminum due to its thermal and mechanical assets. One
of the main cost factors in the wire bonding process is the acquisition cost of
consumables such as bonding tools. For copper wire bonding tool lifetime is much
lower than for aluminium bonding. This paper presents a micro wear model for wedge/wedge
bonding tools that was validated by observing wear patterns with a scanning electron
microscope. The wear coefficient is determined in long-term bonding tests. The
application of Fleischer´s wear approach incorporating frictional power to a finite
element simulation of the bonding processes is used to shift element nodes depending
on the rising frictional power for finite element modeling. The presented simulation
method can be used to take tool wear into consideration for creating tools with
increased lifetime. This enables the production of reliable bond connections using
heavy as well as thin wire of any material. The paper discusses the predominant
influences of wear on the main tool functions and their changes over tool life.
Furthermore, the influence of the tool groove angle on the tool wear was investigated.
One of the main results is that the wear is largest during the last phase of each
bonding process, when the contact area between tool and wire is largest.
author:
- first_name: Paul
full_name: Eichwald, Paul
last_name: Eichwald
- first_name: Andreas
full_name: Unger, Andreas
last_name: Unger
- first_name: Florian
full_name: Eacock, Florian
last_name: Eacock
- first_name: Simon
full_name: Althoff, Simon
last_name: Althoff
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
- first_name: Karsten
full_name: Guth, Karsten
last_name: Guth
- first_name: Michael
full_name: Brökelmann, Michael
last_name: Brökelmann
citation:
ama: 'Eichwald P, Unger A, Eacock F, et al. Micro Wear Modeling in Copper Wire Wedge
Bonding. In: IEEE CPMT Symposium Japan, 2016. ; 2016.'
apa: Eichwald, P., Unger, A., Eacock, F., Althoff, S., Sextro, W., Guth, K., &
Brökelmann, M. (2016). Micro Wear Modeling in Copper Wire Wedge Bonding. In IEEE
CPMT Symposium Japan, 2016.
bibtex: '@inproceedings{Eichwald_Unger_Eacock_Althoff_Sextro_Guth_Brökelmann_2016,
title={Micro Wear Modeling in Copper Wire Wedge Bonding}, booktitle={IEEE CPMT
Symposium Japan, 2016}, author={Eichwald, Paul and Unger, Andreas and Eacock,
Florian and Althoff, Simon and Sextro, Walter and Guth, Karsten and Brökelmann,
Michael}, year={2016} }'
chicago: Eichwald, Paul, Andreas Unger, Florian Eacock, Simon Althoff, Walter Sextro,
Karsten Guth, and Michael Brökelmann. “Micro Wear Modeling in Copper Wire Wedge
Bonding.” In IEEE CPMT Symposium Japan, 2016, 2016.
ieee: P. Eichwald et al., “Micro Wear Modeling in Copper Wire Wedge Bonding,”
in IEEE CPMT Symposium Japan, 2016, 2016.
mla: Eichwald, Paul, et al. “Micro Wear Modeling in Copper Wire Wedge Bonding.”
IEEE CPMT Symposium Japan, 2016, 2016.
short: 'P. Eichwald, A. Unger, F. Eacock, S. Althoff, W. Sextro, K. Guth, M. Brökelmann,
in: IEEE CPMT Symposium Japan, 2016, 2016.'
date_created: 2019-05-27T09:07:19Z
date_updated: 2020-05-07T05:33:53Z
department:
- _id: '151'
language:
- iso: eng
project:
- _id: '92'
grant_number: 02 PQ2210
name: Intelligente Herstellung zuverlässiger Kupferbondverbindungen
publication: IEEE CPMT Symposium Japan, 2016
quality_controlled: '1'
status: public
title: Micro Wear Modeling in Copper Wire Wedge Bonding
type: conference
user_id: '210'
year: '2016'
...
---
_id: '9961'
abstract:
- lang: eng
text: Redundancy is a common approach to improve system reliability, availability
and safety in technical systems. It is achieved by adding functionally equivalent
elements that enable the system to remain operational even though one or more
of those elements fail. This paper begins with an overview on the various terminologies
and methods for redundancy concepts that can be modeled sufficiently using established
reliability analysis methods. However, these approaches yield very complex system
models, which limits their applicability. In current research, Bayesian Networks
(BNs), especially Dynamic Bayesian Networks (DBNs) have been successfully used
for reliability analysis because of their benefits in modeling complex systems
and in representing multi-state variables. However, these approaches lack appropriate
methods to model all commonly used redundancy concepts. To overcome this limitation,
three different modeling approaches based on BNs and DBNs are described in this
paper. Addressing those approaches, the benefits and limitations of BNs and DBNs
for modeling reliability of redundant technical systems are discussed and evaluated.
author:
- first_name: Thorben
full_name: Kaul, Thorben
id: '14802'
last_name: Kaul
- first_name: Tobias
full_name: Meyer, Tobias
last_name: Meyer
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
citation:
ama: 'Kaul T, Meyer T, Sextro W. Modeling of Complex Redundancy in Technical Systems
with Bayesian Networks. In: Proceedings of the Third European Conference of
the Prognostics and Health Management Society 2016. ; 2016.'
apa: Kaul, T., Meyer, T., & Sextro, W. (2016). Modeling of Complex Redundancy
in Technical Systems with Bayesian Networks. In Proceedings of the Third European
Conference of the Prognostics and Health Management Society 2016.
bibtex: '@inproceedings{Kaul_Meyer_Sextro_2016, title={Modeling of Complex Redundancy
in Technical Systems with Bayesian Networks}, booktitle={Proceedings of the Third
European Conference of the Prognostics and Health Management Society 2016}, author={Kaul,
Thorben and Meyer, Tobias and Sextro, Walter}, year={2016} }'
chicago: Kaul, Thorben, Tobias Meyer, and Walter Sextro. “Modeling of Complex Redundancy
in Technical Systems with Bayesian Networks.” In Proceedings of the Third European
Conference of the Prognostics and Health Management Society 2016, 2016.
ieee: T. Kaul, T. Meyer, and W. Sextro, “Modeling of Complex Redundancy in Technical
Systems with Bayesian Networks,” in Proceedings of the Third European Conference
of the Prognostics and Health Management Society 2016, 2016.
mla: Kaul, Thorben, et al. “Modeling of Complex Redundancy in Technical Systems
with Bayesian Networks.” Proceedings of the Third European Conference of the
Prognostics and Health Management Society 2016, 2016.
short: 'T. Kaul, T. Meyer, W. Sextro, in: Proceedings of the Third European Conference
of the Prognostics and Health Management Society 2016, 2016.'
date_created: 2019-05-27T09:10:07Z
date_updated: 2019-09-30T08:05:55Z
department:
- _id: '151'
language:
- iso: eng
publication: Proceedings of the Third European Conference of the Prognostics and Health
Management Society 2016
quality_controlled: '1'
status: public
title: Modeling of Complex Redundancy in Technical Systems with Bayesian Networks
type: conference
user_id: '55222'
year: '2016'
...
---
_id: '9964'
abstract:
- lang: eng
text: This paper presents a benchmark data set for condition monitoring of rolling
bearings in combination with an extensive description of the corresponding bearing
damage, the data set generation by experiments and results of datadriven classifications
used as a diagnostic method. The diagnostic method uses the motor current signal
of an electromechanical drive system for bearing diagnostic. The advantage of
this approach in general is that no additional sensors are required, as current
measurements can be performed in existing frequency inverters. This will help
to reduce the cost of future condition monitoring systems. A particular novelty
of the present approach is the monitoring of damage in external bearings which
are installed in the drive system but outside the electric motor. Nevertheless,
the motor current signal is used as input for the detection of the damage. Moreover,
a wide distribution of bearing damage is considered for the benchmark data set.
The results of the classifications show that the motor current signal can be used
to identify and classify bearing damage within the drive system. However, the
classification accuracy is still low compared to classifications based on vibration
signals. Further, dependency on properties of those bearing damage that were used
for the generation of training data are observed, because training with data of
artificially generated and real bearing damages lead to different accuracies.
Altogether a verified and systematically generated data set is presented and published
online for further research
author:
- first_name: Christian
full_name: Lessmeier, Christian
last_name: Lessmeier
- first_name: James Kuria
full_name: Kimotho, James Kuria
last_name: Kimotho
- first_name: Detmar
full_name: Zimmer, Detmar
last_name: Zimmer
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
citation:
ama: 'Lessmeier C, Kimotho JK, Zimmer D, Sextro W. Condition Monitoring of Bearing
Damage in Electromechanical Drive Systems by Using Motor Current Signals of Electric
Motors: A Benchmark Data Set for Data-Driven Classification. In: European Conference
of the Prognostics and Health Management Society. ; 2016.'
apa: 'Lessmeier, C., Kimotho, J. K., Zimmer, D., & Sextro, W. (2016). Condition
Monitoring of Bearing Damage in Electromechanical Drive Systems by Using Motor
Current Signals of Electric Motors: A Benchmark Data Set for Data-Driven Classification.
In European Conference of the Prognostics and Health Management Society.'
bibtex: '@inproceedings{Lessmeier_Kimotho_Zimmer_Sextro_2016, title={Condition Monitoring
of Bearing Damage in Electromechanical Drive Systems by Using Motor Current Signals
of Electric Motors: A Benchmark Data Set for Data-Driven Classification}, booktitle={European
Conference of the Prognostics and Health Management Society}, author={Lessmeier,
Christian and Kimotho, James Kuria and Zimmer, Detmar and Sextro, Walter}, year={2016}
}'
chicago: 'Lessmeier, Christian, James Kuria Kimotho, Detmar Zimmer, and Walter Sextro.
“Condition Monitoring of Bearing Damage in Electromechanical Drive Systems by
Using Motor Current Signals of Electric Motors: A Benchmark Data Set for Data-Driven
Classification.” In European Conference of the Prognostics and Health Management
Society, 2016.'
ieee: 'C. Lessmeier, J. K. Kimotho, D. Zimmer, and W. Sextro, “Condition Monitoring
of Bearing Damage in Electromechanical Drive Systems by Using Motor Current Signals
of Electric Motors: A Benchmark Data Set for Data-Driven Classification,” in European
Conference of the Prognostics and Health Management Society, 2016.'
mla: 'Lessmeier, Christian, et al. “Condition Monitoring of Bearing Damage in Electromechanical
Drive Systems by Using Motor Current Signals of Electric Motors: A Benchmark Data
Set for Data-Driven Classification.” European Conference of the Prognostics
and Health Management Society, 2016.'
short: 'C. Lessmeier, J.K. Kimotho, D. Zimmer, W. Sextro, in: European Conference
of the Prognostics and Health Management Society, 2016.'
date_created: 2019-05-27T09:14:22Z
date_updated: 2019-09-16T10:35:40Z
department:
- _id: '151'
language:
- iso: eng
publication: European Conference of the Prognostics and Health Management Society
quality_controlled: '1'
status: public
title: 'Condition Monitoring of Bearing Damage in Electromechanical Drive Systems
by Using Motor Current Signals of Electric Motors: A Benchmark Data Set for Data-Driven
Classification'
type: conference
user_id: '55222'
year: '2016'
...
---
_id: '9966'
abstract:
- lang: eng
text: Usage of copper wire bonds allows to push power boundaries imposed by aluminum
wire bonds. Copper allows higher electrical, thermal and mechanical loads than
aluminum, which currently is the most commonly used material in heavy wire bonding.
This is the main driving factor for increased usage of copper in high power applications
such as wind turbines, locomotives or electric vehicles. At the same time, usage
of copper also increases tool wear and reduces the range of parameter values for
a stable process, making the process more challenging. To overcome these drawbacks,
parameter adaptation at runtime using self-optimization is desired. A self-optimizing
system is based on system objectives that evaluate and quantify system performance.
System parameters can be changed at runtime such that pre-selected objective values
are reached. For adaptation of bond process parameters, model-based self-optimization
is employed. Since it is based on a model of the system, the bond process was
modeled. In addition to static model parameters such as wire and substrate material
properties and vibration characteristics of transducer and tool, variable model
inputs are process parameters. Main simulation result is bonded area in the wiresubstrate
contact. This model is then used to find valid and optimal working points before
operation. The working point is composed of normal force and ultrasonic voltage
trajectories, which are usually determined experimentally. Instead, multiobjective
optimalization is used to compute trajectories that simultaneously optimize bond
quality, process duration, tool wear and probability of tool-substrate contacts.
The values of these objectives are computed using the process model. At runtime,
selection among pre-determined optimal working points is sufficient to prioritize
individual objectives. This way, the computationally expensive process of numerically
solving a multiobjective optimal control problem and the demanding high speed
bonding process are separated. To evaluate to what extent the pre-defined goals
of self-optimization are met, an offthe- shelf heavy wire bonding machine was
modified to allow for parameter adaptation and for transmitting of measurement
data at runtime. This data is received by an external computer system and evaluated
to select a new working point. Then, new process parameters are sent to the modified
bonding machine for use for subsequent bonds. With these components, a full self-optimizing
system has been implemented.
author:
- first_name: Tobias
full_name: Meyer , Tobias
last_name: 'Meyer '
- first_name: Andreas
full_name: Unger, Andreas
last_name: Unger
- first_name: Simon
full_name: Althoff, Simon
last_name: Althoff
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
- first_name: Michael
full_name: Brökelmann, Michael
last_name: Brökelmann
- first_name: Matthias
full_name: Hunstig, Matthias
last_name: Hunstig
- first_name: Karsten
full_name: Guth, Karsten
last_name: Guth
citation:
ama: 'Meyer T, Unger A, Althoff S, et al. Reliable Manufacturing of Heavy Copper
Wire Bonds Using Online Parameter Adaptation. In: IEEE 66th Electronic Components
and Technology Conference. ; 2016:622-628. doi:10.1109/ECTC.2016.215'
apa: Meyer , T., Unger, A., Althoff, S., Sextro, W., Brökelmann, M., Hunstig, M.,
& Guth, K. (2016). Reliable Manufacturing of Heavy Copper Wire Bonds Using
Online Parameter Adaptation. In IEEE 66th Electronic Components and Technology
Conference (pp. 622–628). https://doi.org/10.1109/ECTC.2016.215
bibtex: '@inproceedings{Meyer _Unger_Althoff_Sextro_Brökelmann_Hunstig_Guth_2016,
title={Reliable Manufacturing of Heavy Copper Wire Bonds Using Online Parameter
Adaptation}, DOI={10.1109/ECTC.2016.215},
booktitle={IEEE 66th Electronic Components and Technology Conference}, author={Meyer
, Tobias and Unger, Andreas and Althoff, Simon and Sextro, Walter and Brökelmann,
Michael and Hunstig, Matthias and Guth, Karsten}, year={2016}, pages={622–628}
}'
chicago: Meyer , Tobias, Andreas Unger, Simon Althoff, Walter Sextro, Michael Brökelmann,
Matthias Hunstig, and Karsten Guth. “Reliable Manufacturing of Heavy Copper Wire
Bonds Using Online Parameter Adaptation.” In IEEE 66th Electronic Components
and Technology Conference, 622–28, 2016. https://doi.org/10.1109/ECTC.2016.215.
ieee: T. Meyer et al., “Reliable Manufacturing of Heavy Copper Wire Bonds
Using Online Parameter Adaptation,” in IEEE 66th Electronic Components and
Technology Conference, 2016, pp. 622–628.
mla: Meyer , Tobias, et al. “Reliable Manufacturing of Heavy Copper Wire Bonds Using
Online Parameter Adaptation.” IEEE 66th Electronic Components and Technology
Conference, 2016, pp. 622–28, doi:10.1109/ECTC.2016.215.
short: 'T. Meyer , A. Unger, S. Althoff, W. Sextro, M. Brökelmann, M. Hunstig, K.
Guth, in: IEEE 66th Electronic Components and Technology Conference, 2016, pp.
622–628.'
date_created: 2019-05-27T09:17:26Z
date_updated: 2020-05-07T05:33:53Z
department:
- _id: '151'
doi: 10.1109/ECTC.2016.215
keyword:
- Self-optimization
- adaptive system
- bond process
- copper wire
language:
- iso: eng
page: 622-628
project:
- _id: '92'
grant_number: 02 PQ2210
name: Intelligente Herstellung zuverlässiger Kupferbondverbindungen
publication: IEEE 66th Electronic Components and Technology Conference
quality_controlled: '1'
status: public
title: Reliable Manufacturing of Heavy Copper Wire Bonds Using Online Parameter Adaptation
type: conference
user_id: '210'
year: '2016'
...
---
_id: '9968'
abstract:
- lang: eng
text: To increase quality and reliability of copper wire bonds, self-optimization
is a promising technique. For the implementation of self-optimization for ultrasonic
heavy copper wire bonding machines, a model of stick-slip motion between tool
and wire and between wire and substrate during the bonding process is essential.
Investigations confirm that both of these contacts do indeed show stick-slip movement
in each period oscillation. In a first step, this paper shows the importance of
modeling the stick-slip effect by determining, monitoring and analyzing amplitudes
and phase angles of tooltip, wire and substrate experimentally during bonding
via laser measurements. In a second step, the paper presents a dynamic model which
has been parameterized using an iterative numerical parameter identification method.
This model includes Archard’s wear approach in order to compute the lost volume
of tool tip due to wear over the entire process time. A validation of the model
by comparing measured and calculated amplitudes of tool tip and wire reveals high
model quality. Then it is then possible to calculate the lifetime of the tool
for different process parameters, i.e. values of normal force and ultrasonic voltage.
author:
- first_name: Andreas
full_name: Unger, Andreas
last_name: Unger
- first_name: Reinhard
full_name: Schemmel, Reinhard
id: '28647'
last_name: Schemmel
- first_name: Tobias
full_name: Meyer, Tobias
last_name: Meyer
- first_name: Florian
full_name: Eacock, Florian
last_name: Eacock
- first_name: Paul
full_name: Eichwald, Paul
last_name: Eichwald
- first_name: Simon
full_name: Althoff, Simon
last_name: Althoff
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
- first_name: Michael
full_name: Brökelmann, Michael
last_name: Brökelmann
- first_name: Matthias
full_name: Hunstig, Matthias
last_name: Hunstig
- first_name: Karsten
full_name: Guth, Karsten
last_name: Guth
citation:
ama: 'Unger A, Schemmel R, Meyer T, et al. Validated Simulation of the Ultrasonic
Wire Bonding Process. In: Wear Modeling in Copper Wire Wedge Bonding. IEEE
CPMT Symposium Japan, 2016. IEEE CPMT Symposium Japan; 2016:251-254.'
apa: Unger, A., Schemmel, R., Meyer, T., Eacock, F., Eichwald, P., Althoff, S.,
… Guth, K. (2016). Validated Simulation of the Ultrasonic Wire Bonding Process.
In Wear Modeling in Copper Wire Wedge Bonding. IEEE CPMT Symposium Japan, 2016
(pp. 251–254). IEEE CPMT Symposium Japan.
bibtex: '@inproceedings{Unger_Schemmel_Meyer_Eacock_Eichwald_Althoff_Sextro_Brökelmann_Hunstig_Guth_2016,
place={IEEE CPMT Symposium Japan}, title={Validated Simulation of the Ultrasonic
Wire Bonding Process}, booktitle={Wear Modeling in Copper Wire Wedge Bonding.
IEEE CPMT Symposium Japan, 2016}, author={Unger, Andreas and Schemmel, Reinhard
and Meyer, Tobias and Eacock, Florian and Eichwald, Paul and Althoff, Simon and
Sextro, Walter and Brökelmann, Michael and Hunstig, Matthias and Guth, Karsten},
year={2016}, pages={251–254} }'
chicago: Unger, Andreas, Reinhard Schemmel, Tobias Meyer, Florian Eacock, Paul Eichwald,
Simon Althoff, Walter Sextro, Michael Brökelmann, Matthias Hunstig, and Karsten
Guth. “Validated Simulation of the Ultrasonic Wire Bonding Process.” In Wear
Modeling in Copper Wire Wedge Bonding. IEEE CPMT Symposium Japan, 2016, 251–54.
IEEE CPMT Symposium Japan, 2016.
ieee: A. Unger et al., “Validated Simulation of the Ultrasonic Wire Bonding
Process,” in Wear Modeling in Copper Wire Wedge Bonding. IEEE CPMT Symposium
Japan, 2016, 2016, pp. 251–254.
mla: Unger, Andreas, et al. “Validated Simulation of the Ultrasonic Wire Bonding
Process.” Wear Modeling in Copper Wire Wedge Bonding. IEEE CPMT Symposium Japan,
2016, 2016, pp. 251–54.
short: 'A. Unger, R. Schemmel, T. Meyer, F. Eacock, P. Eichwald, S. Althoff, W.
Sextro, M. Brökelmann, M. Hunstig, K. Guth, in: Wear Modeling in Copper Wire Wedge
Bonding. IEEE CPMT Symposium Japan, 2016, IEEE CPMT Symposium Japan, 2016, pp.
251–254.'
date_created: 2019-05-27T09:20:10Z
date_updated: 2020-05-07T05:33:53Z
department:
- _id: '151'
keyword:
- the Ultrasonic Wire Bonding Process
language:
- iso: eng
page: 251-254
place: IEEE CPMT Symposium Japan
project:
- _id: '92'
grant_number: 02 PQ2210
name: Intelligente Herstellung zuverlässiger Kupferbondverbindungen
publication: Wear Modeling in Copper Wire Wedge Bonding. IEEE CPMT Symposium Japan,
2016
quality_controlled: '1'
status: public
title: Validated Simulation of the Ultrasonic Wire Bonding Process
type: conference
user_id: '210'
year: '2016'
...
---
_id: '4374'
author:
- first_name: Steffen
full_name: Zimmermann, Steffen
last_name: Zimmermann
- first_name: Philipp
full_name: Herrmann, Philipp
last_name: Herrmann
- first_name: Dennis
full_name: Kundisch, Dennis
id: '21117'
last_name: Kundisch
- first_name: Barrie
full_name: Nault, Barrie
last_name: Nault
citation:
ama: 'Zimmermann S, Herrmann P, Kundisch D, Nault B. How do different Sources of
the Variance of Online Consumer Ratings matter? In: Workshop on IS Design and
Economic Behavior (ISDEB). ; 2016.'
apa: Zimmermann, S., Herrmann, P., Kundisch, D., & Nault, B. (2016). How do
different Sources of the Variance of Online Consumer Ratings matter? In Workshop
on IS Design and Economic Behavior (ISDEB). Ilmenau, Germany.
bibtex: '@inproceedings{Zimmermann_Herrmann_Kundisch_Nault_2016, title={How do different
Sources of the Variance of Online Consumer Ratings matter?}, booktitle={Workshop
on IS Design and Economic Behavior (ISDEB)}, author={Zimmermann, Steffen and Herrmann,
Philipp and Kundisch, Dennis and Nault, Barrie}, year={2016} }'
chicago: Zimmermann, Steffen, Philipp Herrmann, Dennis Kundisch, and Barrie Nault.
“How Do Different Sources of the Variance of Online Consumer Ratings Matter?”
In Workshop on IS Design and Economic Behavior (ISDEB), 2016.
ieee: S. Zimmermann, P. Herrmann, D. Kundisch, and B. Nault, “How do different Sources
of the Variance of Online Consumer Ratings matter?,” in Workshop on IS Design
and Economic Behavior (ISDEB), Ilmenau, Germany, 2016.
mla: Zimmermann, Steffen, et al. “How Do Different Sources of the Variance of Online
Consumer Ratings Matter?” Workshop on IS Design and Economic Behavior (ISDEB),
2016.
short: 'S. Zimmermann, P. Herrmann, D. Kundisch, B. Nault, in: Workshop on IS Design
and Economic Behavior (ISDEB), 2016.'
conference:
location: Ilmenau, Germany
name: Workshop on IS Design and Economic Behavior (ISDEB)
date_created: 2018-09-10T13:02:44Z
date_updated: 2022-01-06T07:00:59Z
ddc:
- '330'
department:
- _id: '276'
file:
- access_level: closed
content_type: application/pdf
creator: abursig
date_created: 2019-01-29T14:38:25Z
date_updated: 2019-01-29T14:38:25Z
file_id: '7242'
file_name: Rating Variance_CIST_Abstract.pdf
file_size: 83968
relation: main_file
success: 1
file_date_updated: 2019-01-29T14:38:25Z
has_accepted_license: '1'
language:
- iso: eng
project:
- _id: '1'
name: SFB 901
- _id: '2'
name: SFB 901 - Project Area A
- _id: '8'
name: SFB 901 - Subproject A4
publication: Workshop on IS Design and Economic Behavior (ISDEB)
quality_controlled: '1'
status: public
title: How do different Sources of the Variance of Online Consumer Ratings matter?
type: conference_abstract
user_id: '477'
year: '2016'
...
---
_id: '6551'
author:
- first_name: Fabian
full_name: Bause, Fabian
last_name: Bause
- first_name: Jens
full_name: Rautenberg, Jens
last_name: Rautenberg
- first_name: Nadine
full_name: Feldmann, Nadine
id: '23082'
last_name: Feldmann
- first_name: Manuel
full_name: Webersen, Manuel
id: '11289'
last_name: Webersen
orcid: 0000-0001-6411-4232
- first_name: Leander
full_name: Claes, Leander
id: '11829'
last_name: Claes
orcid: 0000-0002-4393-268X
- first_name: Hauke
full_name: Gravenkamp, Hauke
last_name: Gravenkamp
- first_name: Bernd
full_name: Henning, Bernd
id: '213'
last_name: Henning
citation:
ama: Bause F, Rautenberg J, Feldmann N, et al. Ultrasonic transmission measurements
in the characterization of viscoelasticity utilizing polymeric waveguides. Measurement
Science and Technology. 2016;27(10). doi:10.1088/0957-0233/27/10/105601
apa: Bause, F., Rautenberg, J., Feldmann, N., Webersen, M., Claes, L., Gravenkamp,
H., & Henning, B. (2016). Ultrasonic transmission measurements in the characterization
of viscoelasticity utilizing polymeric waveguides. Measurement Science and
Technology, 27(10). https://doi.org/10.1088/0957-0233/27/10/105601
bibtex: '@article{Bause_Rautenberg_Feldmann_Webersen_Claes_Gravenkamp_Henning_2016,
title={Ultrasonic transmission measurements in the characterization of viscoelasticity
utilizing polymeric waveguides}, volume={27}, DOI={10.1088/0957-0233/27/10/105601},
number={10}, journal={Measurement Science and Technology}, author={Bause, Fabian
and Rautenberg, Jens and Feldmann, Nadine and Webersen, Manuel and Claes, Leander
and Gravenkamp, Hauke and Henning, Bernd}, year={2016} }'
chicago: Bause, Fabian, Jens Rautenberg, Nadine Feldmann, Manuel Webersen, Leander
Claes, Hauke Gravenkamp, and Bernd Henning. “Ultrasonic Transmission Measurements
in the Characterization of Viscoelasticity Utilizing Polymeric Waveguides.” Measurement
Science and Technology 27, no. 10 (2016). https://doi.org/10.1088/0957-0233/27/10/105601.
ieee: F. Bause et al., “Ultrasonic transmission measurements in the characterization
of viscoelasticity utilizing polymeric waveguides,” Measurement Science and
Technology, vol. 27, no. 10, 2016.
mla: Bause, Fabian, et al. “Ultrasonic Transmission Measurements in the Characterization
of Viscoelasticity Utilizing Polymeric Waveguides.” Measurement Science and
Technology, vol. 27, no. 10, 2016, doi:10.1088/0957-0233/27/10/105601.
short: F. Bause, J. Rautenberg, N. Feldmann, M. Webersen, L. Claes, H. Gravenkamp,
B. Henning, Measurement Science and Technology 27 (2016).
date_created: 2019-01-09T14:36:57Z
date_updated: 2022-01-06T07:03:11Z
department:
- _id: '49'
doi: 10.1088/0957-0233/27/10/105601
intvolume: ' 27'
issue: '10'
keyword:
- material characterization
- material parameters
- acoustic waveguide
- daming
- ultrasonic transducer
language:
- iso: eng
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
- _id: '87'
grant_number: '222271124'
name: Bestimmung komplexer akustischer Materialkenngrößen
publication: Measurement Science and Technology
quality_controlled: '1'
status: public
title: Ultrasonic transmission measurements in the characterization of viscoelasticity
utilizing polymeric waveguides
type: journal_article
user_id: '23082'
volume: 27
year: '2016'
...
---
_id: '158'
abstract:
- lang: eng
text: 'While requirements focus on how the user interacts with the system, user
stories concentrate on the purpose of software features. But in practice, functional
requirements are also described in user stories. For this reason, requirements
clarification is needed, especially when they are written in natural language
and do not stick to any templates (e.g., "as an X, I want Y so that Z ..."). However,
there is a lot of implicit knowledge that is not expressed in words. As a result,
natural language requirements descriptions may suffer from incompleteness. Existing
approaches try to formalize natural language or focus only on entirely missing
and not on deficient requirements. In this paper, we therefore present an approach
to detect knowledge gaps in user-generated software requirements for interactive
requirement clarification: We provide tailored suggestions to the users in order
to get more precise descriptions. For this purpose, we identify not fully instantiated
predicate argument structures in requirements written in natural language and
use context information to realize what was meant by the user.'
author:
- first_name: Frederik Simon
full_name: Bäumer, Frederik Simon
id: '38837'
last_name: Bäumer
- first_name: Michaela
full_name: Geierhos, Michaela
id: '42496'
last_name: Geierhos
orcid: 0000-0002-8180-5606
citation:
ama: 'Bäumer FS, Geierhos M. Running out of Words: How Similar User Stories Can
Help to Elaborate Individual Natural Language Requirement Descriptions. In: Dregvaite
G, Damasevicius R, eds. Proceedings of the 22nd International Conference on
Information and Software Technologies (ICIST). Vol 639. Communications in
Computer and Information Science. Cham, Switzerland: Springer; 2016:549-558. doi:10.1007/978-3-319-46254-7_44'
apa: 'Bäumer, F. S., & Geierhos, M. (2016). Running out of Words: How Similar
User Stories Can Help to Elaborate Individual Natural Language Requirement Descriptions.
In G. Dregvaite & R. Damasevicius (Eds.), Proceedings of the 22nd International
Conference on Information and Software Technologies (ICIST) (Vol. 639, pp.
549–558). Cham, Switzerland: Springer. https://doi.org/10.1007/978-3-319-46254-7_44'
bibtex: '@inproceedings{Bäumer_Geierhos_2016, place={Cham, Switzerland}, series={Communications
in Computer and Information Science}, title={Running out of Words: How Similar
User Stories Can Help to Elaborate Individual Natural Language Requirement Descriptions},
volume={639}, DOI={10.1007/978-3-319-46254-7_44},
booktitle={Proceedings of the 22nd International Conference on Information and
Software Technologies (ICIST)}, publisher={Springer}, author={Bäumer, Frederik
Simon and Geierhos, Michaela}, editor={Dregvaite, Giedre and Damasevicius, Robertas
Editors}, year={2016}, pages={549–558}, collection={Communications in Computer
and Information Science} }'
chicago: 'Bäumer, Frederik Simon, and Michaela Geierhos. “Running out of Words:
How Similar User Stories Can Help to Elaborate Individual Natural Language Requirement
Descriptions.” In Proceedings of the 22nd International Conference on Information
and Software Technologies (ICIST), edited by Giedre Dregvaite and Robertas Damasevicius,
639:549–58. Communications in Computer and Information Science. Cham, Switzerland:
Springer, 2016. https://doi.org/10.1007/978-3-319-46254-7_44.'
ieee: 'F. S. Bäumer and M. Geierhos, “Running out of Words: How Similar User Stories
Can Help to Elaborate Individual Natural Language Requirement Descriptions,” in
Proceedings of the 22nd International Conference on Information and Software
Technologies (ICIST), Druskininkai, Lithuania, 2016, vol. 639, pp. 549–558.'
mla: 'Bäumer, Frederik Simon, and Michaela Geierhos. “Running out of Words: How
Similar User Stories Can Help to Elaborate Individual Natural Language Requirement
Descriptions.” Proceedings of the 22nd International Conference on Information
and Software Technologies (ICIST), edited by Giedre Dregvaite and Robertas Damasevicius,
vol. 639, Springer, 2016, pp. 549–58, doi:10.1007/978-3-319-46254-7_44.'
short: 'F.S. Bäumer, M. Geierhos, in: G. Dregvaite, R. Damasevicius (Eds.), Proceedings
of the 22nd International Conference on Information and Software Technologies
(ICIST), Springer, Cham, Switzerland, 2016, pp. 549–558.'
conference:
end_date: 2016-10-15
location: Druskininkai, Lithuania
name: 22nd International Conference on Information and Software Technologies (ICIST
2016)
start_date: 2016-10-13
date_created: 2017-10-17T12:41:22Z
date_updated: 2022-01-06T06:52:34Z
ddc:
- '040'
department:
- _id: '36'
- _id: '1'
- _id: '579'
doi: 10.1007/978-3-319-46254-7_44
editor:
- first_name: 'Giedre '
full_name: 'Dregvaite, Giedre '
last_name: Dregvaite
- first_name: 'Robertas '
full_name: 'Damasevicius, Robertas '
last_name: Damasevicius
file:
- access_level: closed
content_type: application/pdf
creator: florida
date_created: 2018-03-21T12:49:38Z
date_updated: 2018-03-21T12:49:38Z
file_id: '1548'
file_name: 158-06390044.pdf
file_size: 860232
relation: main_file
success: 1
file_date_updated: 2018-03-21T12:49:38Z
has_accepted_license: '1'
intvolume: ' 639'
keyword:
- Natural language requirements clarification
- Syntactically incomplete requirements
- Compensatory user stories
language:
- iso: eng
page: 549-558
place: Cham, Switzerland
project:
- _id: '1'
name: SFB 901
- _id: '3'
name: SFB 901 - Project Area B
- _id: '9'
name: SFB 901 - Subproject B1
publication: Proceedings of the 22nd International Conference on Information and Software
Technologies (ICIST)
publication_identifier:
eisbn:
- 978-3-319-46254-7
isbn:
- 978-3-319-46253-0
publication_status: published
publisher: Springer
quality_controlled: '1'
series_title: Communications in Computer and Information Science
status: public
title: 'Running out of Words: How Similar User Stories Can Help to Elaborate Individual
Natural Language Requirement Descriptions'
type: conference
user_id: '477'
volume: 639
year: '2016'
...
---
_id: '29250'
article_type: original
author:
- first_name: Isabel
full_name: Steinhardt, Isabel
id: '90339'
last_name: Steinhardt
orcid: https://orcid.org/0000-0002-2590-6189
citation:
ama: Steinhardt I. Habitussensibilisierung durch Videoanalysen von Lehramtsstudierenden.
Zeitschrift für Hochschulentwicklung. 2016;11(1):225-237. doi:10.3217/zfhe-11-01/13
apa: Steinhardt, I. (2016). Habitussensibilisierung durch Videoanalysen von Lehramtsstudierenden.
Zeitschrift für Hochschulentwicklung, 11(1), 225–237. https://doi.org/10.3217/zfhe-11-01/13
bibtex: '@article{Steinhardt_2016, title={Habitussensibilisierung durch Videoanalysen
von Lehramtsstudierenden}, volume={11}, DOI={10.3217/zfhe-11-01/13},
number={1}, journal={Zeitschrift für Hochschulentwicklung}, author={Steinhardt,
Isabel}, year={2016}, pages={225–237} }'
chicago: 'Steinhardt, Isabel. “Habitussensibilisierung durch Videoanalysen von Lehramtsstudierenden.”
Zeitschrift für Hochschulentwicklung 11, no. 1 (2016): 225–37. https://doi.org/10.3217/zfhe-11-01/13.'
ieee: 'I. Steinhardt, “Habitussensibilisierung durch Videoanalysen von Lehramtsstudierenden,”
Zeitschrift für Hochschulentwicklung, vol. 11, no. 1, pp. 225–237, 2016,
doi: 10.3217/zfhe-11-01/13.'
mla: Steinhardt, Isabel. “Habitussensibilisierung durch Videoanalysen von Lehramtsstudierenden.”
Zeitschrift für Hochschulentwicklung, vol. 11, no. 1, 2016, pp. 225–37,
doi:10.3217/zfhe-11-01/13.
short: I. Steinhardt, Zeitschrift für Hochschulentwicklung 11 (2016) 225–237.
date_created: 2022-01-11T16:29:55Z
date_updated: 2022-01-11T16:31:36Z
department:
- _id: '477'
doi: 10.3217/zfhe-11-01/13
intvolume: ' 11'
issue: '1'
language:
- iso: ger
main_file_link:
- open_access: '1'
oa: '1'
page: 225-237
publication: Zeitschrift für Hochschulentwicklung
publication_status: published
quality_controlled: '1'
status: public
title: Habitussensibilisierung durch Videoanalysen von Lehramtsstudierenden
type: journal_article
user_id: '90339'
volume: 11
year: '2016'
...
---
_id: '31487'
author:
- first_name: Ingrid
full_name: Scharlau, Ingrid
id: '451'
last_name: Scharlau
orcid: 0000-0003-2364-9489
- first_name: Gesche
full_name: Keding, Gesche
last_name: Keding
citation:
ama: 'Scharlau I, Keding G. Die Vergnügungen der anderen: Fachsensible Hochschuldidaktik
als neuer Weg zwischen allgemeiner und fachspezifischer Hochschuldidaktik. In:
Brahm T, Jenert T, Euler D, eds. Pädagogische Hochschulentwicklung: von der
Programmatik zur Implementierung. Springer VS Verlag; 2016:39-55. doi:10.1007/978-3-658-12067-2_3'
apa: 'Scharlau, I., & Keding, G. (2016). Die Vergnügungen der anderen: Fachsensible
Hochschuldidaktik als neuer Weg zwischen allgemeiner und fachspezifischer Hochschuldidaktik.
In T. Brahm, T. Jenert, & D. Euler (Eds.), Pädagogische Hochschulentwicklung:
von der Programmatik zur Implementierung (pp. 39–55). Springer VS Verlag.
https://doi.org/10.1007/978-3-658-12067-2_3'
bibtex: '@inbook{Scharlau_Keding_2016, place={Wiesbaden}, title={Die Vergnügungen
der anderen: Fachsensible Hochschuldidaktik als neuer Weg zwischen allgemeiner
und fachspezifischer Hochschuldidaktik}, DOI={10.1007/978-3-658-12067-2_3},
booktitle={Pädagogische Hochschulentwicklung: von der Programmatik zur Implementierung},
publisher={Springer VS Verlag}, author={Scharlau, Ingrid and Keding, Gesche},
editor={Brahm, Taiga and Jenert, Tobias and Euler, Dieter}, year={2016}, pages={39–55}
}'
chicago: 'Scharlau, Ingrid, and Gesche Keding. “Die Vergnügungen der anderen: Fachsensible
Hochschuldidaktik als neuer Weg zwischen allgemeiner und fachspezifischer Hochschuldidaktik.”
In Pädagogische Hochschulentwicklung: von der Programmatik zur Implementierung,
edited by Taiga Brahm, Tobias Jenert, and Dieter Euler, 39–55. Wiesbaden: Springer
VS Verlag, 2016. https://doi.org/10.1007/978-3-658-12067-2_3.'
ieee: 'I. Scharlau and G. Keding, “Die Vergnügungen der anderen: Fachsensible Hochschuldidaktik
als neuer Weg zwischen allgemeiner und fachspezifischer Hochschuldidaktik,” in
Pädagogische Hochschulentwicklung: von der Programmatik zur Implementierung,
T. Brahm, T. Jenert, and D. Euler, Eds. Wiesbaden: Springer VS Verlag, 2016, pp.
39–55.'
mla: 'Scharlau, Ingrid, and Gesche Keding. “Die Vergnügungen der anderen: Fachsensible
Hochschuldidaktik als neuer Weg zwischen allgemeiner und fachspezifischer Hochschuldidaktik.”
Pädagogische Hochschulentwicklung: von der Programmatik zur Implementierung,
edited by Taiga Brahm et al., Springer VS Verlag, 2016, pp. 39–55, doi:10.1007/978-3-658-12067-2_3.'
short: 'I. Scharlau, G. Keding, in: T. Brahm, T. Jenert, D. Euler (Eds.), Pädagogische
Hochschulentwicklung: von der Programmatik zur Implementierung, Springer VS Verlag,
Wiesbaden, 2016, pp. 39–55.'
date_created: 2022-05-30T00:08:03Z
date_updated: 2022-06-06T21:11:06Z
department:
- _id: '424'
doi: 10.1007/978-3-658-12067-2_3
editor:
- first_name: Taiga
full_name: Brahm, Taiga
last_name: Brahm
- first_name: Tobias
full_name: Jenert, Tobias
last_name: Jenert
- first_name: Dieter
full_name: Euler, Dieter
last_name: Euler
extern: '1'
language:
- iso: ger
page: 39 - 55
place: Wiesbaden
publication: 'Pädagogische Hochschulentwicklung: von der Programmatik zur Implementierung'
publication_identifier:
eisbn:
- '9783658120672'
isbn:
- '9783658120665'
publication_status: published
publisher: Springer VS Verlag
quality_controlled: '1'
status: public
title: 'Die Vergnügungen der anderen: Fachsensible Hochschuldidaktik als neuer Weg
zwischen allgemeiner und fachspezifischer Hochschuldidaktik'
type: book_chapter
user_id: '42165'
year: '2016'
...
---
_id: '31491'
author:
- first_name: Ingrid
full_name: Scharlau, Ingrid
id: '451'
last_name: Scharlau
orcid: 0000-0003-2364-9489
citation:
ama: 'Scharlau I. Mathematik schreiben. In: Schnieder J, Paravicini W, eds. Hanse-Kolloquium
zur Hochschuldidaktik der Mathematik 2014. wtm-Verlag; 2016:183-197.'
apa: Scharlau, I. (2016). Mathematik schreiben. In J. Schnieder & W. Paravicini
(Eds.), Hanse-Kolloquium zur Hochschuldidaktik der Mathematik 2014 (pp.
183–197). wtm-Verlag.
bibtex: '@inproceedings{Scharlau_2016, place={Münster}, title={Mathematik schreiben},
booktitle={Hanse-Kolloquium zur Hochschuldidaktik der Mathematik 2014}, publisher={wtm-Verlag},
author={Scharlau, Ingrid}, editor={Schnieder, Jörn and Paravicini, Walther}, year={2016},
pages={183–197} }'
chicago: 'Scharlau, Ingrid. “Mathematik schreiben.” In Hanse-Kolloquium zur Hochschuldidaktik
der Mathematik 2014, edited by Jörn Schnieder and Walther Paravicini, 183–97.
Münster: wtm-Verlag, 2016.'
ieee: I. Scharlau, “Mathematik schreiben,” in Hanse-Kolloquium zur Hochschuldidaktik
der Mathematik 2014, 2016, pp. 183–197.
mla: Scharlau, Ingrid. “Mathematik schreiben.” Hanse-Kolloquium zur Hochschuldidaktik
der Mathematik 2014, edited by Jörn Schnieder and Walther Paravicini, wtm-Verlag,
2016, pp. 183–97.
short: 'I. Scharlau, in: J. Schnieder, W. Paravicini (Eds.), Hanse-Kolloquium zur
Hochschuldidaktik der Mathematik 2014, wtm-Verlag, Münster, 2016, pp. 183–197.'
date_created: 2022-05-30T01:16:29Z
date_updated: 2022-06-06T23:47:42Z
department:
- _id: '424'
editor:
- first_name: Jörn
full_name: Schnieder, Jörn
last_name: Schnieder
- first_name: Walther
full_name: Paravicini, Walther
last_name: Paravicini
extern: '1'
language:
- iso: ger
page: 183 - 197
place: Münster
publication: Hanse-Kolloquium zur Hochschuldidaktik der Mathematik 2014
publication_identifier:
isbn:
- 978-3-942197-97-7
publication_status: published
publisher: wtm-Verlag
quality_controlled: '1'
status: public
title: Mathematik schreiben
type: conference
user_id: '42165'
year: '2016'
...
---
_id: '31492'
author:
- first_name: Gesche
full_name: Keding, Gesche
last_name: Keding
- first_name: Ingrid
full_name: Scharlau, Ingrid
id: '451'
last_name: Scharlau
orcid: 0000-0003-2364-9489
citation:
ama: 'Keding G, Scharlau I. Drei Einflüsse auf Schreibberatung und ein integriertes
Modell der Selbststeuerung für Schreibberaterinnen und Schreibberater. In: Ballweg
S, ed. Schreibberatung und Schreibförderung. Impulse aus Theorie, Empirie und
Praxis. Lang; 2016:115-134.'
apa: Keding, G., & Scharlau, I. (2016). Drei Einflüsse auf Schreibberatung und
ein integriertes Modell der Selbststeuerung für Schreibberaterinnen und Schreibberater.
In S. Ballweg (Ed.), Schreibberatung und Schreibförderung. Impulse aus Theorie,
Empirie und Praxis (pp. 115–134). Lang.
bibtex: '@inbook{Keding_Scharlau_2016, place={Frankfurt}, title={Drei Einflüsse
auf Schreibberatung und ein integriertes Modell der Selbststeuerung für Schreibberaterinnen
und Schreibberater}, booktitle={Schreibberatung und Schreibförderung. Impulse
aus Theorie, Empirie und Praxis}, publisher={Lang}, author={Keding, Gesche and
Scharlau, Ingrid}, editor={Ballweg, Sandra}, year={2016}, pages={115–134} }'
chicago: 'Keding, Gesche, and Ingrid Scharlau. “Drei Einflüsse auf Schreibberatung
und ein integriertes Modell der Selbststeuerung für Schreibberaterinnen und Schreibberater.”
In Schreibberatung und Schreibförderung. Impulse aus Theorie, Empirie und Praxis,
edited by Sandra Ballweg, 115–34. Frankfurt: Lang, 2016.'
ieee: 'G. Keding and I. Scharlau, “Drei Einflüsse auf Schreibberatung und ein integriertes
Modell der Selbststeuerung für Schreibberaterinnen und Schreibberater,” in Schreibberatung
und Schreibförderung. Impulse aus Theorie, Empirie und Praxis, S. Ballweg,
Ed. Frankfurt: Lang, 2016, pp. 115–134.'
mla: Keding, Gesche, and Ingrid Scharlau. “Drei Einflüsse auf Schreibberatung und
ein integriertes Modell der Selbststeuerung für Schreibberaterinnen und Schreibberater.”
Schreibberatung und Schreibförderung. Impulse aus Theorie, Empirie und Praxis,
edited by Sandra Ballweg, Lang, 2016, pp. 115–34.
short: 'G. Keding, I. Scharlau, in: S. Ballweg (Ed.), Schreibberatung und Schreibförderung.
Impulse aus Theorie, Empirie und Praxis, Lang, Frankfurt, 2016, pp. 115–134.'
date_created: 2022-05-30T01:25:14Z
date_updated: 2022-06-06T23:48:05Z
department:
- _id: '424'
editor:
- first_name: Sandra
full_name: Ballweg, Sandra
last_name: Ballweg
extern: '1'
language:
- iso: ger
page: 115 -134
place: Frankfurt
publication: Schreibberatung und Schreibförderung. Impulse aus Theorie, Empirie und
Praxis
publication_status: published
publisher: Lang
quality_controlled: '1'
status: public
title: Drei Einflüsse auf Schreibberatung und ein integriertes Modell der Selbststeuerung
für Schreibberaterinnen und Schreibberater
type: book_chapter
user_id: '42165'
year: '2016'
...
---
_id: '23585'
author:
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: Patrick
full_name: Taplick, Patrick
last_name: Taplick
- first_name: Jens
full_name: Pottebaum, Jens
id: '405'
last_name: Pottebaum
orcid: http://orcid.org/0000-0001-8778-2989
- first_name: Philipp
full_name: Scholle, Philipp
last_name: Scholle
- first_name: Thomas
full_name: Reiher, Thomas
last_name: Reiher
citation:
ama: 'Gräßler I, Taplick P, Pottebaum J, Scholle P, Reiher T. Data Management for
additive manufacturing: survey on requirements and current state. In: Marjanovic
D, Storga M, Pavkovic N, Bojcetic N, Skec S, eds. Proceedings of the DESIGN
2016 14th International Design Conference, International DESIGN Conference, Band
1. Vol 1. Design Society; 2016.'
apa: 'Gräßler, I., Taplick, P., Pottebaum, J., Scholle, P., & Reiher, T. (2016).
Data Management for additive manufacturing: survey on requirements and current
state. In D. Marjanovic, M. Storga, N. Pavkovic, N. Bojcetic, & S. Skec (Eds.),
Proceedings of the DESIGN 2016 14th International Design Conference, International
DESIGN Conference, Band 1 (Vol. 1). Design Society.'
bibtex: '@inproceedings{Gräßler_Taplick_Pottebaum_Scholle_Reiher_2016, title={Data
Management for additive manufacturing: survey on requirements and current state},
volume={1}, booktitle={Proceedings of the DESIGN 2016 14th International Design
Conference, International DESIGN Conference, Band 1}, publisher={Design Society},
author={Gräßler, Iris and Taplick, Patrick and Pottebaum, Jens and Scholle, Philipp
and Reiher, Thomas}, editor={Marjanovic, Dorian and Storga, Mario and Pavkovic,
Neven and Bojcetic, Nenad and Skec, Stanko}, year={2016} }'
chicago: 'Gräßler, Iris, Patrick Taplick, Jens Pottebaum, Philipp Scholle, and Thomas
Reiher. “Data Management for Additive Manufacturing: Survey on Requirements and
Current State.” In Proceedings of the DESIGN 2016 14th International Design
Conference, International DESIGN Conference, Band 1, edited by Dorian Marjanovic,
Mario Storga, Neven Pavkovic, Nenad Bojcetic, and Stanko Skec, Vol. 1. Design
Society, 2016.'
ieee: 'I. Gräßler, P. Taplick, J. Pottebaum, P. Scholle, and T. Reiher, “Data Management
for additive manufacturing: survey on requirements and current state,” in Proceedings
of the DESIGN 2016 14th International Design Conference, International DESIGN
Conference, Band 1, 2016, vol. 1.'
mla: 'Gräßler, Iris, et al. “Data Management for Additive Manufacturing: Survey
on Requirements and Current State.” Proceedings of the DESIGN 2016 14th International
Design Conference, International DESIGN Conference, Band 1, edited by Dorian
Marjanovic et al., vol. 1, Design Society, 2016.'
short: 'I. Gräßler, P. Taplick, J. Pottebaum, P. Scholle, T. Reiher, in: D. Marjanovic,
M. Storga, N. Pavkovic, N. Bojcetic, S. Skec (Eds.), Proceedings of the DESIGN
2016 14th International Design Conference, International DESIGN Conference, Band
1, Design Society, 2016.'
conference:
end_date: 2016-05-19
start_date: 2016-05-16
date_created: 2021-08-31T11:18:40Z
date_updated: 2023-11-16T09:29:06Z
department:
- _id: '152'
editor:
- first_name: Dorian
full_name: Marjanovic, Dorian
last_name: Marjanovic
- first_name: Mario
full_name: Storga, Mario
last_name: Storga
- first_name: Neven
full_name: Pavkovic, Neven
last_name: Pavkovic
- first_name: Nenad
full_name: Bojcetic, Nenad
last_name: Bojcetic
- first_name: Stanko
full_name: Skec, Stanko
last_name: Skec
intvolume: ' 1'
language:
- iso: eng
publication: Proceedings of the DESIGN 2016 14th International Design Conference,
International DESIGN Conference, Band 1
publisher: Design Society
quality_controlled: '1'
status: public
title: 'Data Management for additive manufacturing: survey on requirements and current
state'
type: conference
user_id: '405'
volume: 1
year: '2016'
...