---
_id: '9767'
abstract:
- lang: eng
text: The paper presents the results of numerical and experimental investigation
of cylindrical piezoelectric actuator used for achieving independent three degrees
of freedom oscillations of the contact point. The design of actuator based on
a hollow piezoelectric cylinder mounted on a metal rod. The piezoceramic cylinder
has a radial polarization and special configuration of the electrodes that cover
inner and outer surface of the cylinder. The main advantage of actuator's design
is that solid metallic rod operates as a part of inner electrode of the cylinder
and a stator of actuator. The geometry of piezoelectric actuator was adopted to
reach resonance of oscillations for the first longitudinal mode and the third
flexural mode at same frequency. The actuator is designed to move positioned object
through contact point which is located on the top of the rod. The optimal topology
of electrodes was found to achieve longitudinal and flexural oscillations of the
actuator in two perpendicular planes. Three degrees of freedom of the positioning
object can be achieved and control of the system can be implemented by applying
different excitation schemes and regimes. The numerical simulation and experimental
study of piezoelectric actuator was performed. Impedance of actuator was analyzed
under different excitation regimes. The results of numerical modeling and experimental
study were compared. Recommendations for the further development of this type
of actuator are given.
author:
- first_name: Raimundas
full_name: Lucinskis, Raimundas
last_name: Lucinskis
- first_name: Dalius
full_name: Mazeika, Dalius
last_name: Mazeika
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
- first_name: Ramutis
full_name: Bansevicius, Ramutis
last_name: Bansevicius
citation:
ama: Lucinskis R, Mazeika D, Hemsel T, Bansevicius R. Multi-DOF cylindrical piezoelectric
actuator with radial polarization. AIP Conference Proceedings. 2011;1433(1):693-696.
doi:10.1063/1.3703277
apa: Lucinskis, R., Mazeika, D., Hemsel, T., & Bansevicius, R. (2011). Multi-DOF
cylindrical piezoelectric actuator with radial polarization. AIP Conference
Proceedings, 1433(1), 693–696. https://doi.org/10.1063/1.3703277
bibtex: '@article{Lucinskis_Mazeika_Hemsel_Bansevicius_2011, title={Multi-DOF cylindrical
piezoelectric actuator with radial polarization}, volume={1433}, DOI={10.1063/1.3703277},
number={1}, journal={AIP Conference Proceedings}, publisher={AIP}, author={Lucinskis,
Raimundas and Mazeika, Dalius and Hemsel, Tobias and Bansevicius, Ramutis}, year={2011},
pages={693–696} }'
chicago: 'Lucinskis, Raimundas, Dalius Mazeika, Tobias Hemsel, and Ramutis Bansevicius.
“Multi-DOF Cylindrical Piezoelectric Actuator with Radial Polarization.” AIP
Conference Proceedings 1433, no. 1 (2011): 693–96. https://doi.org/10.1063/1.3703277.'
ieee: R. Lucinskis, D. Mazeika, T. Hemsel, and R. Bansevicius, “Multi-DOF cylindrical
piezoelectric actuator with radial polarization,” AIP Conference Proceedings,
vol. 1433, no. 1, pp. 693–696, 2011.
mla: Lucinskis, Raimundas, et al. “Multi-DOF Cylindrical Piezoelectric Actuator
with Radial Polarization.” AIP Conference Proceedings, vol. 1433, no. 1,
AIP, 2011, pp. 693–96, doi:10.1063/1.3703277.
short: R. Lucinskis, D. Mazeika, T. Hemsel, R. Bansevicius, AIP Conference Proceedings
1433 (2011) 693–696.
date_created: 2019-05-13T10:56:30Z
date_updated: 2022-01-06T07:04:19Z
department:
- _id: '151'
doi: 10.1063/1.3703277
intvolume: ' 1433'
issue: '1'
keyword:
- dielectric polarisation
- piezoceramics
- piezoelectric actuators
language:
- iso: eng
page: 693-696
publication: AIP Conference Proceedings
publisher: AIP
quality_controlled: '1'
status: public
title: Multi-DOF cylindrical piezoelectric actuator with radial polarization
type: journal_article
user_id: '55222'
volume: 1433
year: '2011'
...
---
_id: '9769'
abstract:
- lang: eng
text: In this study, we report some improvements in a hydrothermal method for lead-free
piezoelectric powders and the performance of the sintered (K$_{0.48}$Na$_{0.52}$)NbO$_{3}$
ceramics. To increase the obtained powder weight per source solution volume, the
hydrothermal reaction conditions were modified. This improvement is important
for mass production; however, it resulted in a larger particle size dispersion.
Therefore, we examined to introduced the ball milling process that is useful for
dense (K$_{0.48}$Na$_{0.52}$)NbO$_{3}$ ceramics. When a large amount of powder
was obtained, it took a long time to eliminate the residual alkaline ions in the
hydrothermal powders by a washing process. Therefore, a neutralization was conducted
in the powder washing process. Using this powder, a solid solution of (K,Na)NbO$_{3}$ceramics
was synthesized. The relative density was successfully increased. Concerning the
electrical properties, the relative permittivity was improved, and the piezoelectric
constant d$_{33}$ was also increased from 114 to 130 pC/N.
author:
- first_name: Takafumi
full_name: Maeda, Takafumi
last_name: Maeda
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
- first_name: Takeshi
full_name: Morita, Takeshi
last_name: Morita
citation:
ama: Maeda T, Hemsel T, Morita T. Improved Process for Hydrothermal Lead-Free Piezoelectric
Powders and Performances of Sintered (K0.48Na0.52)NbO3 Ceramics. Japanese Journal
of Applied Physics. 2011;50:07HC01.
apa: Maeda, T., Hemsel, T., & Morita, T. (2011). Improved Process for Hydrothermal
Lead-Free Piezoelectric Powders and Performances of Sintered (K0.48Na0.52)NbO3
Ceramics. Japanese Journal of Applied Physics, 50, 07HC01.
bibtex: '@article{Maeda_Hemsel_Morita_2011, title={Improved Process for Hydrothermal
Lead-Free Piezoelectric Powders and Performances of Sintered (K0.48Na0.52)NbO3
Ceramics}, volume={50}, journal={Japanese Journal of Applied Physics}, publisher={The
Japan Society of Applied Physics}, author={Maeda, Takafumi and Hemsel, Tobias
and Morita, Takeshi}, year={2011}, pages={07HC01} }'
chicago: 'Maeda, Takafumi, Tobias Hemsel, and Takeshi Morita. “Improved Process
for Hydrothermal Lead-Free Piezoelectric Powders and Performances of Sintered
(K0.48Na0.52)NbO3 Ceramics.” Japanese Journal of Applied Physics 50 (2011):
07HC01.'
ieee: T. Maeda, T. Hemsel, and T. Morita, “Improved Process for Hydrothermal Lead-Free
Piezoelectric Powders and Performances of Sintered (K0.48Na0.52)NbO3 Ceramics,”
Japanese Journal of Applied Physics, vol. 50, p. 07HC01, 2011.
mla: Maeda, Takafumi, et al. “Improved Process for Hydrothermal Lead-Free Piezoelectric
Powders and Performances of Sintered (K0.48Na0.52)NbO3 Ceramics.” Japanese
Journal of Applied Physics, vol. 50, The Japan Society of Applied Physics,
2011, p. 07HC01.
short: T. Maeda, T. Hemsel, T. Morita, Japanese Journal of Applied Physics 50 (2011)
07HC01.
date_created: 2019-05-13T11:00:23Z
date_updated: 2022-01-06T07:04:19Z
department:
- _id: '151'
intvolume: ' 50'
language:
- iso: eng
page: 07HC01
publication: Japanese Journal of Applied Physics
publisher: The Japan Society of Applied Physics
quality_controlled: '1'
status: public
title: Improved Process for Hydrothermal Lead-Free Piezoelectric Powders and Performances
of Sintered (K0.48Na0.52)NbO3 Ceramics
type: journal_article
user_id: '55222'
volume: 50
year: '2011'
...
---
_id: '9770'
abstract:
- lang: eng
text: One cannot image today's life without mechatronic systems, which have to be
developed in a joint effort by teams of mechanical engineers, electrical engineers,
control engineers and software engineers. Often these systems are applied in safety
critical environments like in cars or aircrafts. This requires systems that function
correctly and do not cause hazardous situations. However, random errors due to
wear or external influences cannot be completely excluded. Consequently, we have
to perform a hazard analysis for the system. Further, the union of four disciplines
in one system requires the development and analysis of the system as a whole.
We present a component-based hazard analysis that considers the entire mechatronic
system including hardware, i.e. mechanical and electrical components, and software
components. Our approach considers the physical properties of different types
of flow in mechatronic systems. We have identified reusable patterns for the failure
behavior which can be generated automatically. This reduces the effort for the
developer. As cycles, e.g. control cycles, are an internal part of every mechatronic
system our approach is able to handle cycles. The presented approach has been
applied to a real-life case study.
author:
- first_name: Claudia
full_name: Priesterjahn, Claudia
last_name: Priesterjahn
- first_name: Christoph
full_name: Sondermann-Wölke, Christoph
last_name: Sondermann-Wölke
- first_name: Mathias
full_name: Tichy, Mathias
last_name: Tichy
- first_name: Christian
full_name: Hölscher, Christian
last_name: Hölscher
citation:
ama: 'Priesterjahn C, Sondermann-Wölke C, Tichy M, Hölscher C. Component-based Hazard
Analysis for Mechatronic Systems. In: Proc. of the 2nd IEEE International Workshop
MoBE-RTES at the 14th IEEE International Symposium on Object/Component/Service-Oriented
Real-Time Distributed Computing (ISORC). Newport Beach, USA (USA): IEEE Computer
Society; 2011.'
apa: 'Priesterjahn, C., Sondermann-Wölke, C., Tichy, M., & Hölscher, C. (2011).
Component-based Hazard Analysis for Mechatronic Systems. In Proc. of the 2nd
IEEE International Workshop MoBE-RTES at the 14th IEEE International Symposium
on Object/Component/Service-oriented Real-time Distributed Computing (ISORC).
Newport Beach, USA (USA): IEEE Computer Society.'
bibtex: '@inproceedings{Priesterjahn_Sondermann-Wölke_Tichy_Hölscher_2011, place={Newport
Beach, USA (USA)}, title={Component-based Hazard Analysis for Mechatronic Systems},
booktitle={Proc. of the 2nd IEEE International Workshop MoBE-RTES at the 14th
IEEE International Symposium on Object/Component/Service-oriented Real-time Distributed
Computing (ISORC)}, publisher={IEEE Computer Society}, author={Priesterjahn, Claudia
and Sondermann-Wölke, Christoph and Tichy, Mathias and Hölscher, Christian}, year={2011}
}'
chicago: 'Priesterjahn, Claudia, Christoph Sondermann-Wölke, Mathias Tichy, and
Christian Hölscher. “Component-Based Hazard Analysis for Mechatronic Systems.”
In Proc. of the 2nd IEEE International Workshop MoBE-RTES at the 14th IEEE
International Symposium on Object/Component/Service-Oriented Real-Time Distributed
Computing (ISORC). Newport Beach, USA (USA): IEEE Computer Society, 2011.'
ieee: C. Priesterjahn, C. Sondermann-Wölke, M. Tichy, and C. Hölscher, “Component-based
Hazard Analysis for Mechatronic Systems,” in Proc. of the 2nd IEEE International
Workshop MoBE-RTES at the 14th IEEE International Symposium on Object/Component/Service-oriented
Real-time Distributed Computing (ISORC), 2011.
mla: Priesterjahn, Claudia, et al. “Component-Based Hazard Analysis for Mechatronic
Systems.” Proc. of the 2nd IEEE International Workshop MoBE-RTES at the 14th
IEEE International Symposium on Object/Component/Service-Oriented Real-Time Distributed
Computing (ISORC), IEEE Computer Society, 2011.
short: 'C. Priesterjahn, C. Sondermann-Wölke, M. Tichy, C. Hölscher, in: Proc. of
the 2nd IEEE International Workshop MoBE-RTES at the 14th IEEE International Symposium
on Object/Component/Service-Oriented Real-Time Distributed Computing (ISORC),
IEEE Computer Society, Newport Beach, USA (USA), 2011.'
date_created: 2019-05-13T11:01:13Z
date_updated: 2022-01-06T07:04:19Z
department:
- _id: '151'
language:
- iso: eng
place: Newport Beach, USA (USA)
publication: Proc. of the 2nd IEEE International Workshop MoBE-RTES at the 14th IEEE
International Symposium on Object/Component/Service-oriented Real-time Distributed
Computing (ISORC)
publisher: IEEE Computer Society
quality_controlled: '1'
status: public
title: Component-based Hazard Analysis for Mechatronic Systems
type: conference
user_id: '55222'
year: '2011'
...
---
_id: '9772'
abstract:
- lang: eng
text: 'A profound description of friction in wheel--rail contact plays an essential
role for optimization of traction control strategies, as input quantity for railway
simulations in general and for the estimation of wear and rolling contact fatigue.
A multitude of wheel--rail contact models exists, however, traction--creepage
curves obtained from measurements show quantitative and qualitative deviations.
There are several phenomena which influence the traction--creepage characteristics:
Mechanisms resulting from surface roughness, frictional heating or the presence
of interfacial fluids can have a dominating influence on friction. In this paper,
a new wheel--rail contact model, accounting for these influential parameters,
will be presented. The presented model accounts for the interaction of an interfacial
fluid model for combined boundary and mixed lubrication of rough surfaces with
a wheel--rail contact model that additionally accounts for frictional heating.
A quantitative comparison with measurements found in the literature is not conducted,
since the exact conditions of the measurements are mostly unknown and parameters
can easily be adjusted to fit the measurements. Emphasis is placed on the qualitative
behavior of the model with respect to the measurements and good agreement is found.
The dependence of the maximum traction coefficient on rolling velocity, surface
roughness and normal load is studied under dry and water lubricated conditions.'
author:
- first_name: Christoph
full_name: Tomberger, Christoph
last_name: Tomberger
- first_name: Peter
full_name: Dietmaier, Peter
last_name: Dietmaier
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
- first_name: Klaus
full_name: Six, Klaus
last_name: Six
citation:
ama: 'Tomberger C, Dietmaier P, Sextro W, Six K. Friction in wheel--rail contact:
A model comprising interfacial fluids, surface roughness and temperature. Wear.
2011;271:2-12. doi:10.1016/j.wear.2010.10.025'
apa: 'Tomberger, C., Dietmaier, P., Sextro, W., & Six, K. (2011). Friction in
wheel--rail contact: A model comprising interfacial fluids, surface roughness
and temperature. Wear, 271, 2–12. https://doi.org/10.1016/j.wear.2010.10.025'
bibtex: '@article{Tomberger_Dietmaier_Sextro_Six_2011, title={Friction in wheel--rail
contact: A model comprising interfacial fluids, surface roughness and temperature},
volume={271}, DOI={10.1016/j.wear.2010.10.025},
journal={Wear}, author={Tomberger, Christoph and Dietmaier, Peter and Sextro,
Walter and Six, Klaus}, year={2011}, pages={2–12} }'
chicago: 'Tomberger, Christoph, Peter Dietmaier, Walter Sextro, and Klaus Six. “Friction
in Wheel--Rail Contact: A Model Comprising Interfacial Fluids, Surface Roughness
and Temperature.” Wear 271 (2011): 2–12. https://doi.org/10.1016/j.wear.2010.10.025.'
ieee: 'C. Tomberger, P. Dietmaier, W. Sextro, and K. Six, “Friction in wheel--rail
contact: A model comprising interfacial fluids, surface roughness and temperature,”
Wear, vol. 271, pp. 2–12, 2011.'
mla: 'Tomberger, Christoph, et al. “Friction in Wheel--Rail Contact: A Model Comprising
Interfacial Fluids, Surface Roughness and Temperature.” Wear, vol. 271,
2011, pp. 2–12, doi:10.1016/j.wear.2010.10.025.'
short: C. Tomberger, P. Dietmaier, W. Sextro, K. Six, Wear 271 (2011) 2–12.
date_created: 2019-05-13T11:08:32Z
date_updated: 2022-01-06T07:04:19Z
department:
- _id: '151'
doi: 10.1016/j.wear.2010.10.025
intvolume: ' 271'
keyword:
- Wheel--rail contact
- Rolling contact
- Friction
- Interfacial fluid
- Lubrication
- Surface roughness
- Contact temperature
language:
- iso: eng
page: 2 - 12
publication: Wear
publication_identifier:
issn:
- 0043-1648
quality_controlled: '1'
status: public
title: 'Friction in wheel--rail contact: A model comprising interfacial fluids, surface
roughness and temperature'
type: journal_article
user_id: '55222'
volume: 271
year: '2011'
...
---
_id: '9877'
author:
- first_name: Gaku
full_name: Isobe, Gaku
last_name: Isobe
- first_name: Peter
full_name: Bornmann, Peter
last_name: Bornmann
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
- first_name: Takeshi
full_name: Morita, Takeshi
last_name: Morita
citation:
ama: Isobe G, Bornmann P, Hemsel T, Morita T. High temperature tolerant transducer
for Ultrasonic Assisted Hydrothermal Method. Proceedings of Symposium on Ultrasonic
Electronics. 2011;32:19-20.
apa: Isobe, G., Bornmann, P., Hemsel, T., & Morita, T. (2011). High temperature
tolerant transducer for Ultrasonic Assisted Hydrothermal Method. Proceedings
of Symposium on Ultrasonic Electronics, 32, 19–20.
bibtex: '@article{Isobe_Bornmann_Hemsel_Morita_2011, title={High temperature tolerant
transducer for Ultrasonic Assisted Hydrothermal Method}, volume={32}, journal={Proceedings
of Symposium on Ultrasonic Electronics}, publisher={Trans Tech Publ}, author={Isobe,
Gaku and Bornmann, Peter and Hemsel, Tobias and Morita, Takeshi}, year={2011},
pages={19–20} }'
chicago: 'Isobe, Gaku, Peter Bornmann, Tobias Hemsel, and Takeshi Morita. “High
Temperature Tolerant Transducer for Ultrasonic Assisted Hydrothermal Method.”
Proceedings of Symposium on Ultrasonic Electronics 32 (2011): 19–20.'
ieee: G. Isobe, P. Bornmann, T. Hemsel, and T. Morita, “High temperature tolerant
transducer for Ultrasonic Assisted Hydrothermal Method,” Proceedings of Symposium
on Ultrasonic Electronics, vol. 32, pp. 19–20, 2011.
mla: Isobe, Gaku, et al. “High Temperature Tolerant Transducer for Ultrasonic Assisted
Hydrothermal Method.” Proceedings of Symposium on Ultrasonic Electronics,
vol. 32, Trans Tech Publ, 2011, pp. 19–20.
short: G. Isobe, P. Bornmann, T. Hemsel, T. Morita, Proceedings of Symposium on
Ultrasonic Electronics 32 (2011) 19–20.
date_created: 2019-05-20T13:09:04Z
date_updated: 2019-09-16T11:31:38Z
department:
- _id: '151'
intvolume: ' 32'
language:
- iso: eng
page: 19-20
publication: Proceedings of Symposium on Ultrasonic Electronics
publisher: Trans Tech Publ
quality_controlled: '1'
status: public
title: High temperature tolerant transducer for Ultrasonic Assisted Hydrothermal Method
type: journal_article
user_id: '55222'
volume: 32
year: '2011'
...
---
_id: '16000'
author:
- first_name: Thorsten
full_name: Marten, Thorsten
id: '338'
last_name: Marten
- first_name: J.
full_name: Niewel, J.
last_name: Niewel
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: Marten T, Niewel J, Tröster T. Untersuchung alternativer Erwärmungsverfahren
für den Presshärteprozess. HTM Journal of Heat Treatment and Materials.
Published online 2011:309-315. doi:10.3139/105.110119
apa: Marten, T., Niewel, J., & Tröster, T. (2011). Untersuchung alternativer
Erwärmungsverfahren für den Presshärteprozess. HTM Journal of Heat Treatment
and Materials, 309–315. https://doi.org/10.3139/105.110119
bibtex: '@article{Marten_Niewel_Tröster_2011, title={Untersuchung alternativer Erwärmungsverfahren
für den Presshärteprozess}, DOI={10.3139/105.110119},
journal={HTM Journal of Heat Treatment and Materials}, author={Marten, Thorsten
and Niewel, J. and Tröster, Thomas}, year={2011}, pages={309–315} }'
chicago: Marten, Thorsten, J. Niewel, and Thomas Tröster. “Untersuchung alternativer
Erwärmungsverfahren für den Presshärteprozess.” HTM Journal of Heat Treatment
and Materials, 2011, 309–15. https://doi.org/10.3139/105.110119.
ieee: 'T. Marten, J. Niewel, and T. Tröster, “Untersuchung alternativer Erwärmungsverfahren
für den Presshärteprozess,” HTM Journal of Heat Treatment and Materials,
pp. 309–315, 2011, doi: 10.3139/105.110119.'
mla: Marten, Thorsten, et al. “Untersuchung alternativer Erwärmungsverfahren für
den Presshärteprozess.” HTM Journal of Heat Treatment and Materials, 2011,
pp. 309–15, doi:10.3139/105.110119.
short: T. Marten, J. Niewel, T. Tröster, HTM Journal of Heat Treatment and Materials
(2011) 309–315.
date_created: 2020-02-24T10:33:12Z
date_updated: 2022-04-19T13:51:51Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.3139/105.110119
language:
- iso: ger
page: 309-315
publication: HTM Journal of Heat Treatment and Materials
publication_identifier:
issn:
- 1867-2493
- 2194-1831
publication_status: published
quality_controlled: '1'
status: public
title: Untersuchung alternativer Erwärmungsverfahren für den Presshärteprozess
type: journal_article
user_id: '338'
year: '2011'
...
---
_id: '22029'
abstract:
- lang: eng
text: In this work the influence of the orientation and the toolpath generation
of manufactured parts based on the mechanical data are analyzed. Tensile Specimen
are generated with the given parameters as well as with changing parameters of
the native software based upon the CAD data. The parts then are built up with
the “Fortus 400mc” from Stratasys. First tensile tests show different strength
and strain characteristics that depend on the given structure and as a result
of the build direction. The influence of the parameters was analyzed with a statistic
test method by using the software Design Expert.
author:
- first_name: A.
full_name: Bagsik, A.
last_name: Bagsik
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
citation:
ama: 'Bagsik A, Schöppner V. Mechanical Properties of Fused Deposition Modeling
Parts Manufactured with ULTEM*9085. In: ANTEC. ; 2011:1294-1298. doi:https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf'
apa: Bagsik, A., & Schöppner, V. (2011). Mechanical Properties of Fused Deposition
Modeling Parts Manufactured with ULTEM*9085. ANTEC, 1294–1298. https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf
bibtex: '@inproceedings{Bagsik_Schöppner_2011, title={Mechanical Properties of Fused
Deposition Modeling Parts Manufactured with ULTEM*9085}, DOI={https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf},
booktitle={ANTEC}, author={Bagsik, A. and Schöppner, Volker}, year={2011}, pages={1294–1298}
}'
chicago: Bagsik, A., and Volker Schöppner. “Mechanical Properties of Fused Deposition
Modeling Parts Manufactured with ULTEM*9085.” In ANTEC, 1294–98, 2011.
https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf.
ieee: 'A. Bagsik and V. Schöppner, “Mechanical Properties of Fused Deposition Modeling
Parts Manufactured with ULTEM*9085,” in ANTEC, 2011, pp. 1294–1298, doi:
https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf.'
mla: Bagsik, A., and Volker Schöppner. “Mechanical Properties of Fused Deposition
Modeling Parts Manufactured with ULTEM*9085.” ANTEC, 2011, pp. 1294–98,
doi:https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf.
short: 'A. Bagsik, V. Schöppner, in: ANTEC, 2011, pp. 1294–1298.'
date_created: 2021-05-07T13:23:09Z
date_updated: 2022-04-25T08:04:05Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '9'
doi: https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf
language:
- iso: eng
page: 1294-1298
publication: ANTEC
quality_controlled: '1'
status: public
title: Mechanical Properties of Fused Deposition Modeling Parts Manufactured with
ULTEM*9085
type: conference
user_id: '70729'
year: '2011'
...
---
_id: '28046'
author:
- first_name: Bea
full_name: Bloh, Bea
id: '69910'
last_name: Bloh
- first_name: Kerstin
full_name: Drossel, Kerstin
id: '48921'
last_name: Drossel
citation:
ama: Bloh B, Drossel K. Formen der Lehrerkooperation und ihre schulischen Bedingungen.
Empirische Untersuchung zur kollegialen Zusammenarbeit und Schulleitungshandeln.
Empirische Pädagogik. 2011;25(2):145-160.
apa: Bloh, B., & Drossel, K. (2011). Formen der Lehrerkooperation und ihre schulischen
Bedingungen. Empirische Untersuchung zur kollegialen Zusammenarbeit und Schulleitungshandeln.
Empirische Pädagogik, 25(2), 145–160.
bibtex: '@article{Bloh_Drossel_2011, title={Formen der Lehrerkooperation und ihre
schulischen Bedingungen. Empirische Untersuchung zur kollegialen Zusammenarbeit
und Schulleitungshandeln.}, volume={25}, number={2}, journal={Empirische Pädagogik},
author={Bloh, Bea and Drossel, Kerstin}, year={2011}, pages={145–160} }'
chicago: 'Bloh, Bea, and Kerstin Drossel. “Formen der Lehrerkooperation und ihre
schulischen Bedingungen. Empirische Untersuchung zur kollegialen Zusammenarbeit
und Schulleitungshandeln.” Empirische Pädagogik 25, no. 2 (2011): 145–60.'
ieee: B. Bloh and K. Drossel, “Formen der Lehrerkooperation und ihre schulischen
Bedingungen. Empirische Untersuchung zur kollegialen Zusammenarbeit und Schulleitungshandeln.,”
Empirische Pädagogik, vol. 25, no. 2, pp. 145–160, 2011.
mla: Bloh, Bea, and Kerstin Drossel. “Formen der Lehrerkooperation und ihre schulischen
Bedingungen. Empirische Untersuchung zur kollegialen Zusammenarbeit und Schulleitungshandeln.”
Empirische Pädagogik, vol. 25, no. 2, 2011, pp. 145–60.
short: B. Bloh, K. Drossel, Empirische Pädagogik 25 (2011) 145–160.
date_created: 2021-11-29T15:30:28Z
date_updated: 2022-01-13T19:10:50Z
department:
- _id: '36'
- _id: '456'
extern: '1'
intvolume: ' 25'
issue: '2'
language:
- iso: ger
page: 145-160
publication: Empirische Pädagogik
quality_controlled: '1'
status: public
title: Formen der Lehrerkooperation und ihre schulischen Bedingungen. Empirische Untersuchung
zur kollegialen Zusammenarbeit und Schulleitungshandeln.
type: journal_article
user_id: '49044'
volume: 25
year: '2011'
...
---
_id: '28048'
author:
- first_name: Julia
full_name: Gerick, Julia
last_name: Gerick
- first_name: Bea
full_name: Bloh, Bea
id: '69910'
last_name: Bloh
citation:
ama: Gerick J, Bloh B. Erweiterter Gestaltungspielraum für Schulen. Welche Veränderungen
beschreiben Schulleiterinnen und Schulleiter in ihrem beruflichen Selbstverständnis?
Schulverwaltung NRW. 2011;10:268-270.
apa: Gerick, J., & Bloh, B. (2011). Erweiterter Gestaltungspielraum für Schulen.
Welche Veränderungen beschreiben Schulleiterinnen und Schulleiter in ihrem beruflichen
Selbstverständnis? Schulverwaltung NRW, 10, 268–270.
bibtex: '@article{Gerick_Bloh_2011, title={Erweiterter Gestaltungspielraum für Schulen.
Welche Veränderungen beschreiben Schulleiterinnen und Schulleiter in ihrem beruflichen
Selbstverständnis?}, volume={10}, journal={Schulverwaltung NRW}, author={Gerick,
Julia and Bloh, Bea}, year={2011}, pages={268–270} }'
chicago: 'Gerick, Julia, and Bea Bloh. “Erweiterter Gestaltungspielraum für Schulen.
Welche Veränderungen beschreiben Schulleiterinnen und Schulleiter in ihrem beruflichen
Selbstverständnis?” Schulverwaltung NRW 10 (2011): 268–70.'
ieee: J. Gerick and B. Bloh, “Erweiterter Gestaltungspielraum für Schulen. Welche
Veränderungen beschreiben Schulleiterinnen und Schulleiter in ihrem beruflichen
Selbstverständnis?,” Schulverwaltung NRW, vol. 10, pp. 268–270, 2011.
mla: Gerick, Julia, and Bea Bloh. “Erweiterter Gestaltungspielraum für Schulen.
Welche Veränderungen beschreiben Schulleiterinnen und Schulleiter in ihrem beruflichen
Selbstverständnis?” Schulverwaltung NRW, vol. 10, 2011, pp. 268–70.
short: J. Gerick, B. Bloh, Schulverwaltung NRW 10 (2011) 268–270.
date_created: 2021-11-29T15:31:19Z
date_updated: 2022-01-13T19:11:13Z
department:
- _id: '36'
- _id: '456'
extern: '1'
intvolume: ' 10'
language:
- iso: ger
page: 268-270
publication: Schulverwaltung NRW
quality_controlled: '1'
status: public
title: Erweiterter Gestaltungspielraum für Schulen. Welche Veränderungen beschreiben
Schulleiterinnen und Schulleiter in ihrem beruflichen Selbstverständnis?
type: journal_article
user_id: '49044'
volume: 10
year: '2011'
...
---
_id: '28042'
author:
- first_name: Bea
full_name: Bloh, Bea
id: '69910'
last_name: Bloh
- first_name: Stefanie
full_name: van Ophuysen, Stefanie
last_name: van Ophuysen
citation:
ama: Bloh B, van Ophuysen S. Transformationale Führung in Schulen. Der Einsatz des
“Multifactor Leadership Questionnaire” (MLQ 5 x Short). Journal for Educational
Research Online. 2011;3(1):141-167.
apa: Bloh, B., & van Ophuysen, S. (2011). Transformationale Führung in Schulen.
Der Einsatz des “Multifactor Leadership Questionnaire” (MLQ 5 x Short). Journal
for Educational Research Online, 3(1), 141–167.
bibtex: '@article{Bloh_van Ophuysen_2011, title={Transformationale Führung in Schulen.
Der Einsatz des “Multifactor Leadership Questionnaire” (MLQ 5 x Short)}, volume={3},
number={1}, journal={Journal for Educational Research Online}, author={Bloh, Bea
and van Ophuysen, Stefanie}, year={2011}, pages={141–167} }'
chicago: 'Bloh, Bea, and Stefanie van Ophuysen. “Transformationale Führung in Schulen.
Der Einsatz des ‘Multifactor Leadership Questionnaire’ (MLQ 5 x Short).” Journal
for Educational Research Online 3, no. 1 (2011): 141–67.'
ieee: B. Bloh and S. van Ophuysen, “Transformationale Führung in Schulen. Der Einsatz
des ‘Multifactor Leadership Questionnaire’ (MLQ 5 x Short),” Journal for Educational
Research Online, vol. 3, no. 1, pp. 141–167, 2011.
mla: Bloh, Bea, and Stefanie van Ophuysen. “Transformationale Führung in Schulen.
Der Einsatz des ‘Multifactor Leadership Questionnaire’ (MLQ 5 x Short).” Journal
for Educational Research Online, vol. 3, no. 1, 2011, pp. 141–67.
short: B. Bloh, S. van Ophuysen, Journal for Educational Research Online 3 (2011)
141–167.
date_created: 2021-11-29T15:25:36Z
date_updated: 2022-01-13T19:11:01Z
department:
- _id: '36'
- _id: '456'
extern: '1'
intvolume: ' 3'
issue: '1'
language:
- iso: ger
page: 141-167
publication: Journal for Educational Research Online
quality_controlled: '1'
status: public
title: Transformationale Führung in Schulen. Der Einsatz des "Multifactor Leadership
Questionnaire" (MLQ 5 x Short)
type: journal_article
user_id: '49044'
volume: 3
year: '2011'
...
---
_id: '28043'
author:
- first_name: Bea
full_name: Bloh, Bea
id: '69910'
last_name: Bloh
- first_name: Mario
full_name: Gieske, Mario
last_name: Gieske
- first_name: Julia
full_name: Gerick, Julia
last_name: Gerick
citation:
ama: 'Bloh B, Gieske M, Gerick J. Schulleitungstypen in eigenverantwortlichen Schulen.
In: Dietrich F, Heinrich M, Thieme N, eds. Neue Steuerung - Alte Ungleichheiten?.
; 2011:101-112.'
apa: Bloh, B., Gieske, M., & Gerick, J. (2011). Schulleitungstypen in eigenverantwortlichen
Schulen. In F. Dietrich, M. Heinrich, & N. Thieme (Eds.), Neue Steuerung
- Alte Ungleichheiten? (pp. 101–112).
bibtex: '@inbook{Bloh_Gieske_Gerick_2011, title={Schulleitungstypen in eigenverantwortlichen
Schulen}, booktitle={Neue Steuerung - Alte Ungleichheiten?}, author={Bloh, Bea
and Gieske, Mario and Gerick, Julia}, editor={Dietrich, F. and Heinrich, M. and
Thieme, N.}, year={2011}, pages={101–112} }'
chicago: Bloh, Bea, Mario Gieske, and Julia Gerick. “Schulleitungstypen in eigenverantwortlichen
Schulen.” In Neue Steuerung - Alte Ungleichheiten?, edited by F. Dietrich,
M. Heinrich, and N. Thieme, 101–12, 2011.
ieee: B. Bloh, M. Gieske, and J. Gerick, “Schulleitungstypen in eigenverantwortlichen
Schulen,” in Neue Steuerung - Alte Ungleichheiten?, F. Dietrich, M. Heinrich,
and N. Thieme, Eds. 2011, pp. 101–112.
mla: Bloh, Bea, et al. “Schulleitungstypen in eigenverantwortlichen Schulen.” Neue
Steuerung - Alte Ungleichheiten?, edited by F. Dietrich et al., 2011, pp.
101–12.
short: 'B. Bloh, M. Gieske, J. Gerick, in: F. Dietrich, M. Heinrich, N. Thieme (Eds.),
Neue Steuerung - Alte Ungleichheiten?, 2011, pp. 101–112.'
date_created: 2021-11-29T15:27:01Z
date_updated: 2022-01-13T19:11:39Z
department:
- _id: '36'
- _id: '456'
editor:
- first_name: F.
full_name: Dietrich, F.
last_name: Dietrich
- first_name: M.
full_name: Heinrich, M.
last_name: Heinrich
- first_name: N.
full_name: Thieme, N.
last_name: Thieme
extern: '1'
language:
- iso: ger
page: 101-112
publication: Neue Steuerung - Alte Ungleichheiten?
quality_controlled: '1'
status: public
title: Schulleitungstypen in eigenverantwortlichen Schulen
type: book_chapter
user_id: '49044'
year: '2011'
...
---
_id: '28049'
author:
- first_name: Bea
full_name: Bloh, Bea
id: '69910'
last_name: Bloh
citation:
ama: 'Bloh B. Für eine gesunde Schule sorgen: Lehrergesundheit als Aufgabe der Schulleitung
– Entlastung als Qualitätsmerkmal. Lernende Schule. 2011;14(53):18-21.'
apa: 'Bloh, B. (2011). Für eine gesunde Schule sorgen: Lehrergesundheit als Aufgabe
der Schulleitung – Entlastung als Qualitätsmerkmal. Lernende Schule, 14(53),
18–21.'
bibtex: '@article{Bloh_2011, title={Für eine gesunde Schule sorgen: Lehrergesundheit
als Aufgabe der Schulleitung – Entlastung als Qualitätsmerkmal.}, volume={14},
number={53}, journal={Lernende Schule}, author={Bloh, Bea}, year={2011}, pages={18–21}
}'
chicago: 'Bloh, Bea. “Für eine gesunde Schule sorgen: Lehrergesundheit als Aufgabe
der Schulleitung – Entlastung als Qualitätsmerkmal.” Lernende Schule 14,
no. 53 (2011): 18–21.'
ieee: 'B. Bloh, “Für eine gesunde Schule sorgen: Lehrergesundheit als Aufgabe der
Schulleitung – Entlastung als Qualitätsmerkmal.,” Lernende Schule, vol.
14, no. 53, pp. 18–21, 2011.'
mla: 'Bloh, Bea. “Für eine gesunde Schule sorgen: Lehrergesundheit als Aufgabe der
Schulleitung – Entlastung als Qualitätsmerkmal.” Lernende Schule, vol.
14, no. 53, 2011, pp. 18–21.'
short: B. Bloh, Lernende Schule 14 (2011) 18–21.
date_created: 2021-11-29T15:32:22Z
date_updated: 2022-01-13T19:11:26Z
department:
- _id: '36'
- _id: '456'
extern: '1'
intvolume: ' 14'
issue: '53'
language:
- iso: ger
page: 18-21
publication: Lernende Schule
quality_controlled: '1'
status: public
title: 'Für eine gesunde Schule sorgen: Lehrergesundheit als Aufgabe der Schulleitung
– Entlastung als Qualitätsmerkmal.'
type: journal_article
user_id: '49044'
volume: 14
year: '2011'
...
---
_id: '35342'
article_type: original
author:
- first_name: Mohamed
full_name: Youssry, Mohamed
last_name: Youssry
- first_name: Luigi
full_name: Coppola, Luigi
last_name: Coppola
- first_name: Isabella
full_name: Nicotera, Isabella
last_name: Nicotera
- first_name: Gönül
full_name: Ar, Gönül
last_name: Ar
- first_name: Claudia
full_name: Schmidt, Claudia
id: '466'
last_name: Schmidt
orcid: 0000-0003-3179-9997
citation:
ama: Youssry M, Coppola L, Nicotera I, Ar G, Schmidt C. Effect of shear on vesicle
and lamellar phases of DDAB/lecithin ternary systems. Journal of Colloid and
Interface Science. 2011;358(2):506-512. doi:10.1016/j.jcis.2011.03.053
apa: Youssry, M., Coppola, L., Nicotera, I., Ar, G., & Schmidt, C. (2011). Effect
of shear on vesicle and lamellar phases of DDAB/lecithin ternary systems. Journal
of Colloid and Interface Science, 358(2), 506–512. https://doi.org/10.1016/j.jcis.2011.03.053
bibtex: '@article{Youssry_Coppola_Nicotera_Ar_Schmidt_2011, title={Effect of shear
on vesicle and lamellar phases of DDAB/lecithin ternary systems}, volume={358},
DOI={10.1016/j.jcis.2011.03.053},
number={2}, journal={Journal of Colloid and Interface Science}, publisher={Elsevier
BV}, author={Youssry, Mohamed and Coppola, Luigi and Nicotera, Isabella and Ar,
Gönül and Schmidt, Claudia}, year={2011}, pages={506–512} }'
chicago: 'Youssry, Mohamed, Luigi Coppola, Isabella Nicotera, Gönül Ar, and Claudia
Schmidt. “Effect of Shear on Vesicle and Lamellar Phases of DDAB/Lecithin Ternary
Systems.” Journal of Colloid and Interface Science 358, no. 2 (2011): 506–12.
https://doi.org/10.1016/j.jcis.2011.03.053.'
ieee: 'M. Youssry, L. Coppola, I. Nicotera, G. Ar, and C. Schmidt, “Effect of shear
on vesicle and lamellar phases of DDAB/lecithin ternary systems,” Journal of
Colloid and Interface Science, vol. 358, no. 2, pp. 506–512, 2011, doi: 10.1016/j.jcis.2011.03.053.'
mla: Youssry, Mohamed, et al. “Effect of Shear on Vesicle and Lamellar Phases of
DDAB/Lecithin Ternary Systems.” Journal of Colloid and Interface Science,
vol. 358, no. 2, Elsevier BV, 2011, pp. 506–12, doi:10.1016/j.jcis.2011.03.053.
short: M. Youssry, L. Coppola, I. Nicotera, G. Ar, C. Schmidt, Journal of Colloid
and Interface Science 358 (2011) 506–512.
date_created: 2023-01-06T13:08:39Z
date_updated: 2023-01-07T11:32:21Z
department:
- _id: '2'
- _id: '315'
doi: 10.1016/j.jcis.2011.03.053
intvolume: ' 358'
issue: '2'
keyword:
- Colloid and Surface Chemistry
- Surfaces
- Coatings and Films
- Biomaterials
- Electronic
- Optical and Magnetic Materials
language:
- iso: eng
page: 506-512
publication: Journal of Colloid and Interface Science
publication_identifier:
issn:
- 0021-9797
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Effect of shear on vesicle and lamellar phases of DDAB/lecithin ternary systems
type: journal_article
user_id: '466'
volume: 358
year: '2011'
...
---
_id: '35344'
article_type: original
author:
- first_name: Frank M.
full_name: Bayer, Frank M.
last_name: Bayer
- first_name: Mingxue
full_name: Tang, Mingxue
last_name: Tang
- first_name: Rolf
full_name: Michels, Rolf
last_name: Michels
- first_name: Claudia
full_name: Schmidt, Claudia
id: '466'
last_name: Schmidt
orcid: 0000-0003-3179-9997
- first_name: Klaus
full_name: Huber, Klaus
last_name: Huber
citation:
ama: Bayer FM, Tang M, Michels R, Schmidt C, Huber K. Molecular Recognition with
2,4-Diaminotriazine-Functionalized Colloids. Langmuir. 2011;27(21):12851-12858.
doi:10.1021/la202685e
apa: Bayer, F. M., Tang, M., Michels, R., Schmidt, C., & Huber, K. (2011). Molecular
Recognition with 2,4-Diaminotriazine-Functionalized Colloids. Langmuir,
27(21), 12851–12858. https://doi.org/10.1021/la202685e
bibtex: '@article{Bayer_Tang_Michels_Schmidt_Huber_2011, title={Molecular Recognition
with 2,4-Diaminotriazine-Functionalized Colloids}, volume={27}, DOI={10.1021/la202685e},
number={21}, journal={Langmuir}, publisher={American Chemical Society (ACS)},
author={Bayer, Frank M. and Tang, Mingxue and Michels, Rolf and Schmidt, Claudia
and Huber, Klaus}, year={2011}, pages={12851–12858} }'
chicago: 'Bayer, Frank M., Mingxue Tang, Rolf Michels, Claudia Schmidt, and Klaus
Huber. “Molecular Recognition with 2,4-Diaminotriazine-Functionalized Colloids.”
Langmuir 27, no. 21 (2011): 12851–58. https://doi.org/10.1021/la202685e.'
ieee: 'F. M. Bayer, M. Tang, R. Michels, C. Schmidt, and K. Huber, “Molecular Recognition
with 2,4-Diaminotriazine-Functionalized Colloids,” Langmuir, vol. 27, no.
21, pp. 12851–12858, 2011, doi: 10.1021/la202685e.'
mla: Bayer, Frank M., et al. “Molecular Recognition with 2,4-Diaminotriazine-Functionalized
Colloids.” Langmuir, vol. 27, no. 21, American Chemical Society (ACS),
2011, pp. 12851–58, doi:10.1021/la202685e.
short: F.M. Bayer, M. Tang, R. Michels, C. Schmidt, K. Huber, Langmuir 27 (2011)
12851–12858.
date_created: 2023-01-06T13:09:26Z
date_updated: 2023-01-07T11:31:37Z
department:
- _id: '2'
- _id: '315'
doi: 10.1021/la202685e
intvolume: ' 27'
issue: '21'
keyword:
- Electrochemistry
- Spectroscopy
- Surfaces and Interfaces
- Condensed Matter Physics
- General Materials Science
language:
- iso: eng
page: 12851-12858
publication: Langmuir
publication_identifier:
issn:
- 0743-7463
- 1520-5827
publication_status: published
publisher: American Chemical Society (ACS)
quality_controlled: '1'
status: public
title: Molecular Recognition with 2,4-Diaminotriazine-Functionalized Colloids
type: journal_article
user_id: '466'
volume: 27
year: '2011'
...
---
_id: '5973'
article_type: original
author:
- first_name: Ingrid
full_name: Åslund, Ingrid
last_name: Åslund
- first_name: Bruno
full_name: Medronho, Bruno
last_name: Medronho
- first_name: Daniel
full_name: Topgaard, Daniel
last_name: Topgaard
- first_name: Olle
full_name: Söderman, Olle
last_name: Söderman
- first_name: Claudia
full_name: Schmidt, Claudia
id: '466'
last_name: Schmidt
orcid: 0000-0003-3179-9997
citation:
ama: Åslund I, Medronho B, Topgaard D, Söderman O, Schmidt C. Homogeneous length
scale of shear-induced multilamellar vesicles studied by diffusion NMR. Journal
of Magnetic Resonance. 2011;209(2):291-299. doi:10.1016/j.jmr.2011.01.024
apa: Åslund, I., Medronho, B., Topgaard, D., Söderman, O., & Schmidt, C. (2011).
Homogeneous length scale of shear-induced multilamellar vesicles studied by diffusion
NMR. Journal of Magnetic Resonance, 209(2), 291–299. https://doi.org/10.1016/j.jmr.2011.01.024
bibtex: '@article{Åslund_Medronho_Topgaard_Söderman_Schmidt_2011, title={Homogeneous
length scale of shear-induced multilamellar vesicles studied by diffusion NMR},
volume={209}, DOI={10.1016/j.jmr.2011.01.024},
number={2}, journal={Journal of Magnetic Resonance}, publisher={Elsevier BV},
author={Åslund, Ingrid and Medronho, Bruno and Topgaard, Daniel and Söderman,
Olle and Schmidt, Claudia}, year={2011}, pages={291–299} }'
chicago: 'Åslund, Ingrid, Bruno Medronho, Daniel Topgaard, Olle Söderman, and Claudia
Schmidt. “Homogeneous Length Scale of Shear-Induced Multilamellar Vesicles Studied
by Diffusion NMR.” Journal of Magnetic Resonance 209, no. 2 (2011): 291–99.
https://doi.org/10.1016/j.jmr.2011.01.024.'
ieee: 'I. Åslund, B. Medronho, D. Topgaard, O. Söderman, and C. Schmidt, “Homogeneous
length scale of shear-induced multilamellar vesicles studied by diffusion NMR,”
Journal of Magnetic Resonance, vol. 209, no. 2, pp. 291–299, 2011, doi:
10.1016/j.jmr.2011.01.024.'
mla: Åslund, Ingrid, et al. “Homogeneous Length Scale of Shear-Induced Multilamellar
Vesicles Studied by Diffusion NMR.” Journal of Magnetic Resonance, vol.
209, no. 2, Elsevier BV, 2011, pp. 291–99, doi:10.1016/j.jmr.2011.01.024.
short: I. Åslund, B. Medronho, D. Topgaard, O. Söderman, C. Schmidt, Journal of
Magnetic Resonance 209 (2011) 291–299.
date_created: 2018-11-28T16:10:47Z
date_updated: 2023-01-07T11:30:13Z
department:
- _id: '315'
- _id: '2'
doi: 10.1016/j.jmr.2011.01.024
intvolume: ' 209'
issue: '2'
language:
- iso: eng
page: 291-299
publication: Journal of Magnetic Resonance
publication_identifier:
issn:
- 1090-7807
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Homogeneous length scale of shear-induced multilamellar vesicles studied by
diffusion NMR
type: journal_article
user_id: '466'
volume: 209
year: '2011'
...
---
_id: '35346'
article_number: '4938'
article_type: original
author:
- first_name: Bruno
full_name: Medronho, Bruno
last_name: Medronho
- first_name: Jennifer
full_name: Brown, Jennifer
last_name: Brown
- first_name: Maria Graça
full_name: Miguel, Maria Graça
last_name: Miguel
- first_name: Claudia
full_name: Schmidt, Claudia
id: '466'
last_name: Schmidt
orcid: 0000-0003-3179-9997
- first_name: Ulf
full_name: Olsson, Ulf
last_name: Olsson
- first_name: Petrik
full_name: Galvosas, Petrik
last_name: Galvosas
citation:
ama: 'Medronho B, Brown J, Miguel MG, Schmidt C, Olsson U, Galvosas P. Planar lamellae
and onions: a spatially resolved rheo–NMR approach to the shear-induced structural
transformations in a surfactant model system. Soft Matter. 2011;7(10).
doi:10.1039/c0sm01323d'
apa: 'Medronho, B., Brown, J., Miguel, M. G., Schmidt, C., Olsson, U., & Galvosas,
P. (2011). Planar lamellae and onions: a spatially resolved rheo–NMR approach
to the shear-induced structural transformations in a surfactant model system.
Soft Matter, 7(10), Article 4938. https://doi.org/10.1039/c0sm01323d'
bibtex: '@article{Medronho_Brown_Miguel_Schmidt_Olsson_Galvosas_2011, title={Planar
lamellae and onions: a spatially resolved rheo–NMR approach to the shear-induced
structural transformations in a surfactant model system}, volume={7}, DOI={10.1039/c0sm01323d}, number={104938},
journal={Soft Matter}, publisher={Royal Society of Chemistry (RSC)}, author={Medronho,
Bruno and Brown, Jennifer and Miguel, Maria Graça and Schmidt, Claudia and Olsson,
Ulf and Galvosas, Petrik}, year={2011} }'
chicago: 'Medronho, Bruno, Jennifer Brown, Maria Graça Miguel, Claudia Schmidt,
Ulf Olsson, and Petrik Galvosas. “Planar Lamellae and Onions: A Spatially Resolved
Rheo–NMR Approach to the Shear-Induced Structural Transformations in a Surfactant
Model System.” Soft Matter 7, no. 10 (2011). https://doi.org/10.1039/c0sm01323d.'
ieee: 'B. Medronho, J. Brown, M. G. Miguel, C. Schmidt, U. Olsson, and P. Galvosas,
“Planar lamellae and onions: a spatially resolved rheo–NMR approach to the shear-induced
structural transformations in a surfactant model system,” Soft Matter,
vol. 7, no. 10, Art. no. 4938, 2011, doi: 10.1039/c0sm01323d.'
mla: 'Medronho, Bruno, et al. “Planar Lamellae and Onions: A Spatially Resolved
Rheo–NMR Approach to the Shear-Induced Structural Transformations in a Surfactant
Model System.” Soft Matter, vol. 7, no. 10, 4938, Royal Society of Chemistry
(RSC), 2011, doi:10.1039/c0sm01323d.'
short: B. Medronho, J. Brown, M.G. Miguel, C. Schmidt, U. Olsson, P. Galvosas, Soft
Matter 7 (2011).
date_created: 2023-01-06T13:10:26Z
date_updated: 2023-01-07T11:32:58Z
department:
- _id: '2'
- _id: '315'
doi: 10.1039/c0sm01323d
intvolume: ' 7'
issue: '10'
keyword:
- Condensed Matter Physics
- General Chemistry
language:
- iso: eng
publication: Soft Matter
publication_identifier:
issn:
- 1744-683X
- 1744-6848
publication_status: published
publisher: Royal Society of Chemistry (RSC)
quality_controlled: '1'
status: public
title: 'Planar lamellae and onions: a spatially resolved rheo–NMR approach to the
shear-induced structural transformations in a surfactant model system'
type: journal_article
user_id: '466'
volume: 7
year: '2011'
...
---
_id: '11889'
abstract:
- lang: eng
text: In this paper we propose to jointly consider Segmental Dynamic Time Warping
and distance clustering for the unsupervised learning of acoustic events. As a
result, the computational complexity increases only linearly with the dababase
size compared to a quadratic increase in a sequential setup, where all pairwise
SDTW distances between segments are computed prior to clustering. Further, we
discuss options for seed value selection for clustering and show that drawing
seeds with a probability proportional to the distance from the already drawn seeds,
known as K-means++ clustering, results in a significantly higher probability of
finding representatives of each of the underlying classes, compared to the commonly
used draws from a uniform distribution. Experiments are performed on an acoustic
event classification and an isolated digit recognition task, where on the latter
the final word accuracy approaches that of supervised training.
author:
- first_name: Joerg
full_name: Schmalenstroeer, Joerg
id: '460'
last_name: Schmalenstroeer
- first_name: Markus
full_name: Bartek, Markus
last_name: Bartek
- first_name: Reinhold
full_name: Haeb-Umbach, Reinhold
id: '242'
last_name: Haeb-Umbach
citation:
ama: 'Schmalenstroeer J, Bartek M, Haeb-Umbach R. Unsupervised learning of acoustic
events using dynamic time warping and hierarchical K-means++ clustering. In: Interspeech
2011. ; 2011.'
apa: Schmalenstroeer, J., Bartek, M., & Haeb-Umbach, R. (2011). Unsupervised
learning of acoustic events using dynamic time warping and hierarchical K-means++
clustering. Interspeech 2011.
bibtex: '@inproceedings{Schmalenstroeer_Bartek_Haeb-Umbach_2011, title={Unsupervised
learning of acoustic events using dynamic time warping and hierarchical K-means++
clustering}, booktitle={Interspeech 2011}, author={Schmalenstroeer, Joerg and
Bartek, Markus and Haeb-Umbach, Reinhold}, year={2011} }'
chicago: Schmalenstroeer, Joerg, Markus Bartek, and Reinhold Haeb-Umbach. “Unsupervised
Learning of Acoustic Events Using Dynamic Time Warping and Hierarchical K-Means++
Clustering.” In Interspeech 2011, 2011.
ieee: J. Schmalenstroeer, M. Bartek, and R. Haeb-Umbach, “Unsupervised learning
of acoustic events using dynamic time warping and hierarchical K-means++ clustering,”
2011.
mla: Schmalenstroeer, Joerg, et al. “Unsupervised Learning of Acoustic Events Using
Dynamic Time Warping and Hierarchical K-Means++ Clustering.” Interspeech 2011,
2011.
short: 'J. Schmalenstroeer, M. Bartek, R. Haeb-Umbach, in: Interspeech 2011, 2011.'
date_created: 2019-07-12T05:30:13Z
date_updated: 2023-10-26T08:10:44Z
department:
- _id: '54'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://groups.uni-paderborn.de/nt/pubs/2011/ScBaHa11-2.pdf
oa: '1'
publication: Interspeech 2011
quality_controlled: '1'
status: public
title: Unsupervised learning of acoustic events using dynamic time warping and hierarchical
K-means++ clustering
type: conference
user_id: '460'
year: '2011'
...
---
_id: '11896'
abstract:
- lang: eng
text: In this paper we propose a procedure for estimating the geometric configuration
of an arbitrary acoustic sensor placement. It determines the position and the
orientation of microphone arrays in 2D while locating a source by direction-of-arrival
(DoA) estimation. Neither artificial calibration signals nor unnatural user activity
are required. The problem of scale indeterminacy inherent to DoA-only observations
is solved by adding time difference of arrival (TDOA) measurements. The geometry
calibration method is numerically stable and delivers precise results in moderately
reverberated rooms. Simulation results are confirmed by laboratory experiments.
author:
- first_name: Joerg
full_name: Schmalenstroeer, Joerg
id: '460'
last_name: Schmalenstroeer
- first_name: Florian
full_name: Jacob, Florian
last_name: Jacob
- first_name: Reinhold
full_name: Haeb-Umbach, Reinhold
id: '242'
last_name: Haeb-Umbach
- first_name: Marius
full_name: Hennecke, Marius
last_name: Hennecke
- first_name: Gernot A.
full_name: Fink, Gernot A.
last_name: Fink
citation:
ama: 'Schmalenstroeer J, Jacob F, Haeb-Umbach R, Hennecke M, Fink GA. Unsupervised
Geometry Calibration of Acoustic Sensor Networks Using Source Correspondences.
In: Interspeech 2011. ; 2011.'
apa: Schmalenstroeer, J., Jacob, F., Haeb-Umbach, R., Hennecke, M., & Fink,
G. A. (2011). Unsupervised Geometry Calibration of Acoustic Sensor Networks Using
Source Correspondences. Interspeech 2011.
bibtex: '@inproceedings{Schmalenstroeer_Jacob_Haeb-Umbach_Hennecke_Fink_2011, title={Unsupervised
Geometry Calibration of Acoustic Sensor Networks Using Source Correspondences},
booktitle={Interspeech 2011}, author={Schmalenstroeer, Joerg and Jacob, Florian
and Haeb-Umbach, Reinhold and Hennecke, Marius and Fink, Gernot A.}, year={2011}
}'
chicago: Schmalenstroeer, Joerg, Florian Jacob, Reinhold Haeb-Umbach, Marius Hennecke,
and Gernot A. Fink. “Unsupervised Geometry Calibration of Acoustic Sensor Networks
Using Source Correspondences.” In Interspeech 2011, 2011.
ieee: J. Schmalenstroeer, F. Jacob, R. Haeb-Umbach, M. Hennecke, and G. A. Fink,
“Unsupervised Geometry Calibration of Acoustic Sensor Networks Using Source Correspondences,”
2011.
mla: Schmalenstroeer, Joerg, et al. “Unsupervised Geometry Calibration of Acoustic
Sensor Networks Using Source Correspondences.” Interspeech 2011, 2011.
short: 'J. Schmalenstroeer, F. Jacob, R. Haeb-Umbach, M. Hennecke, G.A. Fink, in:
Interspeech 2011, 2011.'
date_created: 2019-07-12T05:30:21Z
date_updated: 2023-10-26T08:10:28Z
department:
- _id: '54'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://groups.uni-paderborn.de/nt/pubs/2011/ScJaHaHeFi11.pdf
oa: '1'
publication: Interspeech 2011
quality_controlled: '1'
status: public
title: Unsupervised Geometry Calibration of Acoustic Sensor Networks Using Source
Correspondences
type: conference
user_id: '460'
year: '2011'
...
---
_id: '9456'
abstract:
- lang: eng
text: In this paper we present our experimental results about classifying audio
data into broad acoustic categories. The reverberated sound samples from indoor
recordings are grouped into four classes, namely speech, music, acoustic events
and noise. We investigated a total of 188 acoustic features and achieved for the
best configuration a classification accuracy better than 98\%. This was achieved
by a 42-dimensional feature vector consisting of Mel-Frequency Cepstral Coefficients,
an autocorrelation feature and so-called track features that measure the length
of ''traces'' of high energy in the spectrogram. We also found a 4-feature configuration
with a classification rate of about 90\% allowing for broad acoustic category
classification with low computational effort.
author:
- first_name: Joerg
full_name: Schmalenstroeer, Joerg
id: '460'
last_name: Schmalenstroeer
- first_name: Markus
full_name: Bartek, Markus
last_name: Bartek
- first_name: Reinhold
full_name: Haeb-Umbach, Reinhold
id: '242'
last_name: Haeb-Umbach
citation:
ama: 'Schmalenstroeer J, Bartek M, Haeb-Umbach R. Investigations into Features for
Robust Classification into Broad Acoustic Categories. In: 37. Deutsche Jahrestagung
Fuer Akustik (DAGA 2011). ; 2011.'
apa: Schmalenstroeer, J., Bartek, M., & Haeb-Umbach, R. (2011). Investigations
into Features for Robust Classification into Broad Acoustic Categories. 37.
Deutsche Jahrestagung Fuer Akustik (DAGA 2011).
bibtex: '@inproceedings{Schmalenstroeer_Bartek_Haeb-Umbach_2011, title={Investigations
into Features for Robust Classification into Broad Acoustic Categories}, booktitle={37.
Deutsche Jahrestagung fuer Akustik (DAGA 2011)}, author={Schmalenstroeer, Joerg
and Bartek, Markus and Haeb-Umbach, Reinhold}, year={2011} }'
chicago: Schmalenstroeer, Joerg, Markus Bartek, and Reinhold Haeb-Umbach. “Investigations
into Features for Robust Classification into Broad Acoustic Categories.” In 37.
Deutsche Jahrestagung Fuer Akustik (DAGA 2011), 2011.
ieee: J. Schmalenstroeer, M. Bartek, and R. Haeb-Umbach, “Investigations into Features
for Robust Classification into Broad Acoustic Categories,” 2011.
mla: Schmalenstroeer, Joerg, et al. “Investigations into Features for Robust Classification
into Broad Acoustic Categories.” 37. Deutsche Jahrestagung Fuer Akustik (DAGA
2011), 2011.
short: 'J. Schmalenstroeer, M. Bartek, R. Haeb-Umbach, in: 37. Deutsche Jahrestagung
Fuer Akustik (DAGA 2011), 2011.'
date_created: 2019-04-25T14:36:02Z
date_updated: 2023-10-26T08:15:44Z
department:
- _id: '54'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://groups.uni-paderborn.de/nt/pubs/2011/ScBaHa11-1.pdf
oa: '1'
publication: 37. Deutsche Jahrestagung fuer Akustik (DAGA 2011)
quality_controlled: '1'
status: public
title: Investigations into Features for Robust Classification into Broad Acoustic
Categories
type: conference
user_id: '460'
year: '2011'
...
---
_id: '24034'
author:
- first_name: Christian-Friedrich
full_name: Lindemann, Christian-Friedrich
id: '2930'
last_name: Lindemann
- first_name: Jens
full_name: Pottebaum, Jens
id: '405'
last_name: Pottebaum
orcid: http://orcid.org/0000-0001-8778-2989
- first_name: Gesine
full_name: Hofinger, Gesine
last_name: Hofinger
- first_name: Laura
full_name: Künzer, Laura
last_name: Künzer
- first_name: Rainer
full_name: Koch, Rainer
last_name: Koch
citation:
ama: 'Lindemann C-F, Pottebaum J, Hofinger G, Künzer L, Koch R. Interdisziplinäre
Anforderungsanalyse bei der Gestaltung von Systemen zur Erstellung eines gemeinsamen
Lagebilds in großen Schadenslagen. In: Reussner RH, Pretschner A, J{\"a}hnichen
S, eds. Software Engineering 2011 - Workshopband (Inkl. Doktorandensymposium),
Fachtagung Des GI-Fachbereichs Softwaretechnik, 21.-25.02.2011, Karlsruhe.
LNI. GI; 2011:193-204.'
apa: Lindemann, C.-F., Pottebaum, J., Hofinger, G., Künzer, L., & Koch, R. (2011).
Interdisziplinäre Anforderungsanalyse bei der Gestaltung von Systemen zur Erstellung
eines gemeinsamen Lagebilds in großen Schadenslagen. In R. H. Reussner, A. Pretschner,
& S. J{\"a}hnichen (Eds.), Software Engineering 2011 - Workshopband (inkl.
Doktorandensymposium), Fachtagung des GI-Fachbereichs Softwaretechnik, 21.-25.02.2011,
Karlsruhe (pp. 193–204). GI.
bibtex: '@inproceedings{Lindemann_Pottebaum_Hofinger_Künzer_Koch_2011, series={LNI},
title={Interdisziplinäre Anforderungsanalyse bei der Gestaltung von Systemen zur
Erstellung eines gemeinsamen Lagebilds in großen Schadenslagen}, booktitle={Software
Engineering 2011 - Workshopband (inkl. Doktorandensymposium), Fachtagung des GI-Fachbereichs
Softwaretechnik, 21.-25.02.2011, Karlsruhe}, publisher={GI}, author={Lindemann,
Christian-Friedrich and Pottebaum, Jens and Hofinger, Gesine and Künzer, Laura
and Koch, Rainer}, editor={Reussner, Ralf H. and Pretschner, Alexander and J{\"a}hnichen,
Stefan}, year={2011}, pages={193–204}, collection={LNI} }'
chicago: Lindemann, Christian-Friedrich, Jens Pottebaum, Gesine Hofinger, Laura
Künzer, and Rainer Koch. “Interdisziplinäre Anforderungsanalyse Bei Der Gestaltung
von Systemen Zur Erstellung Eines Gemeinsamen Lagebilds in Großen Schadenslagen.”
In Software Engineering 2011 - Workshopband (Inkl. Doktorandensymposium), Fachtagung
Des GI-Fachbereichs Softwaretechnik, 21.-25.02.2011, Karlsruhe, edited by
Ralf H. Reussner, Alexander Pretschner, and Stefan J{\"a}hnichen, 193–204. LNI.
GI, 2011.
ieee: C.-F. Lindemann, J. Pottebaum, G. Hofinger, L. Künzer, and R. Koch, “Interdisziplinäre
Anforderungsanalyse bei der Gestaltung von Systemen zur Erstellung eines gemeinsamen
Lagebilds in großen Schadenslagen,” in Software Engineering 2011 - Workshopband
(inkl. Doktorandensymposium), Fachtagung des GI-Fachbereichs Softwaretechnik,
21.-25.02.2011, Karlsruhe, 2011, pp. 193–204.
mla: Lindemann, Christian-Friedrich, et al. “Interdisziplinäre Anforderungsanalyse
Bei Der Gestaltung von Systemen Zur Erstellung Eines Gemeinsamen Lagebilds in
Großen Schadenslagen.” Software Engineering 2011 - Workshopband (Inkl. Doktorandensymposium),
Fachtagung Des GI-Fachbereichs Softwaretechnik, 21.-25.02.2011, Karlsruhe,
edited by Ralf H. Reussner et al., GI, 2011, pp. 193–204.
short: 'C.-F. Lindemann, J. Pottebaum, G. Hofinger, L. Künzer, R. Koch, in: R.H.
Reussner, A. Pretschner, S. J{\"a}hnichen (Eds.), Software Engineering 2011 -
Workshopband (Inkl. Doktorandensymposium), Fachtagung Des GI-Fachbereichs Softwaretechnik,
21.-25.02.2011, Karlsruhe, GI, 2011, pp. 193–204.'
date_created: 2021-09-09T12:17:26Z
date_updated: 2023-11-16T09:06:06Z
editor:
- first_name: Ralf H.
full_name: Reussner, Ralf H.
last_name: Reussner
- first_name: Alexander
full_name: Pretschner, Alexander
last_name: Pretschner
- first_name: Stefan
full_name: J{\"a}hnichen, Stefan
last_name: J{\"a}hnichen
keyword:
- Ver{\
language:
- iso: eng
page: 193-204
publication: Software Engineering 2011 - Workshopband (inkl. Doktorandensymposium),
Fachtagung des GI-Fachbereichs Softwaretechnik, 21.-25.02.2011, Karlsruhe
publication_identifier:
isbn:
- 978-3-88579-278-9
publisher: GI
quality_controlled: '1'
series_title: LNI
status: public
title: Interdisziplinäre Anforderungsanalyse bei der Gestaltung von Systemen zur Erstellung
eines gemeinsamen Lagebilds in großen Schadenslagen
type: conference
user_id: '405'
year: '2011'
...