---
_id: '9752'
abstract:
- lang: eng
text: Piezoelectric inertia motors make use of the inertia of a slider to drive
the slider by friction contact in a series of small steps which are generally
composed of a stick phase and a slip phase. If the best electrical drive signal
for the piezoelectric actuator in an inertia motor is to be determined, its dynamical
behaviour must be known. A classic dynamic lumped parameter model for piezoelectric
actuators is valid only in resonance and, therefore, is not suitable for modelling
the actuator in an inertia motor. A reduced dynamic model is used instead. Its
parameters are identified using a step response measurement. This model is used
to predict the movement of the actuator in response to a velocity-optimized signal
introduced in a separate contribution. Results show that the model cannot represent
the dynamical characteristics of the actuator completely. For determining voltage
signals that let piezoelectric actuators follow a calculated movement pattern
exactly, the model can, therefore, only be used with limitations.
author:
- first_name: Matthias
full_name: Hunstig, Matthias
last_name: Hunstig
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
citation:
ama: Hunstig M, Hemsel T. Parameter Identification and Model Validation for the
Piezoelectric Actuator in an Inertia Motor. Journal of Korean Physical Society.
2010;57(4):952-954. doi:10.3938/jkps.57.952
apa: Hunstig, M., & Hemsel, T. (2010). Parameter Identification and Model Validation
for the Piezoelectric Actuator in an Inertia Motor. Journal of Korean Physical
Society, 57(4), 952–954. https://doi.org/10.3938/jkps.57.952
bibtex: '@article{Hunstig_Hemsel_2010, title={Parameter Identification and Model
Validation for the Piezoelectric Actuator in an Inertia Motor}, volume={57}, DOI={10.3938/jkps.57.952}, number={4},
journal={Journal of Korean Physical Society}, author={Hunstig, Matthias and Hemsel,
Tobias}, year={2010}, pages={952–954} }'
chicago: 'Hunstig, Matthias, and Tobias Hemsel. “Parameter Identification and Model
Validation for the Piezoelectric Actuator in an Inertia Motor.” Journal of
Korean Physical Society 57, no. 4 (2010): 952–54. https://doi.org/10.3938/jkps.57.952.'
ieee: M. Hunstig and T. Hemsel, “Parameter Identification and Model Validation for
the Piezoelectric Actuator in an Inertia Motor,” Journal of Korean Physical
Society, vol. 57, no. 4, pp. 952–954, 2010.
mla: Hunstig, Matthias, and Tobias Hemsel. “Parameter Identification and Model Validation
for the Piezoelectric Actuator in an Inertia Motor.” Journal of Korean Physical
Society, vol. 57, no. 4, 2010, pp. 952–54, doi:10.3938/jkps.57.952.
short: M. Hunstig, T. Hemsel, Journal of Korean Physical Society 57 (2010) 952–954.
date_created: 2019-05-13T10:04:13Z
date_updated: 2022-01-06T07:04:19Z
department:
- _id: '151'
doi: 10.3938/jkps.57.952
intvolume: ' 57'
issue: '4'
language:
- iso: eng
page: 952-954
publication: Journal of Korean Physical Society
publication_identifier:
issn:
- 1948-5719
quality_controlled: '1'
status: public
title: Parameter Identification and Model Validation for the Piezoelectric Actuator
in an Inertia Motor
type: journal_article
user_id: '55222'
volume: 57
year: '2010'
...
---
_id: '9754'
abstract:
- lang: eng
text: A model based design approach for improved piezoelectric inertia motors is
presented. Three velocityoptimized movement patterns for the driving body have
been derived. The influence of the motor parameters and the process of designing
an application specific motor with maximum velocity are shown. A simple dynamic
model of the piezoelectric actuator is used to calculate the voltage signal for
achieving the desired movement pattern. Observed distortions of the optimum pattern,
their influence on the motion of the driven body and different methods to reduce
them are discussed.
author:
- first_name: Matthias
full_name: Hunstig, Matthias
last_name: Hunstig
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
citation:
ama: 'Hunstig M, Hemsel T, Sextro W. Improving the Performance of Piezoelectric
Inertia Motors. In: ACTUATOR 2010 Conference Proceedings. ; 2010:657-661.'
apa: Hunstig, M., Hemsel, T., & Sextro, W. (2010). Improving the Performance
of Piezoelectric Inertia Motors. In ACTUATOR 2010 Conference Proceedings
(pp. 657–661).
bibtex: '@inproceedings{Hunstig_Hemsel_Sextro_2010, title={Improving the Performance
of Piezoelectric Inertia Motors}, booktitle={ACTUATOR 2010 Conference Proceedings},
author={Hunstig, Matthias and Hemsel, Tobias and Sextro, Walter}, year={2010},
pages={657–661} }'
chicago: Hunstig, Matthias, Tobias Hemsel, and Walter Sextro. “Improving the Performance
of Piezoelectric Inertia Motors.” In ACTUATOR 2010 Conference Proceedings,
657–61, 2010.
ieee: M. Hunstig, T. Hemsel, and W. Sextro, “Improving the Performance of Piezoelectric
Inertia Motors,” in ACTUATOR 2010 Conference Proceedings, 2010, pp. 657–661.
mla: Hunstig, Matthias, et al. “Improving the Performance of Piezoelectric Inertia
Motors.” ACTUATOR 2010 Conference Proceedings, 2010, pp. 657–61.
short: 'M. Hunstig, T. Hemsel, W. Sextro, in: ACTUATOR 2010 Conference Proceedings,
2010, pp. 657–661.'
date_created: 2019-05-13T10:10:31Z
date_updated: 2022-01-06T07:04:19Z
department:
- _id: '151'
language:
- iso: eng
page: 657-661
publication: ACTUATOR 2010 Conference Proceedings
publication_identifier:
issn:
- 0924-4247
quality_controlled: '1'
status: public
title: Improving the Performance of Piezoelectric Inertia Motors
type: conference
user_id: '55222'
year: '2010'
...
---
_id: '9757'
author:
- first_name: Raimundas
full_name: Lucinskis, Raimundas
last_name: Lucinskis
- first_name: Dalius
full_name: Mazeika, Dalius
last_name: Mazeika
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
- first_name: Ramutis
full_name: Bansevicius, Ramutis
last_name: Bansevicius
citation:
ama: Lucinskis R, Mazeika D, Hemsel T, Bansevicius R. The experimental research
of piezoelectric actuator with two vectors of polarization direction. MECHANIKA.
2010.
apa: Lucinskis, R., Mazeika, D., Hemsel, T., & Bansevicius, R. (2010). The experimental
research of piezoelectric actuator with two vectors of polarization direction.
MECHANIKA.
bibtex: '@article{Lucinskis_Mazeika_Hemsel_Bansevicius_2010, title={The experimental
research of piezoelectric actuator with two vectors of polarization direction},
journal={MECHANIKA}, author={Lucinskis, Raimundas and Mazeika, Dalius and Hemsel,
Tobias and Bansevicius, Ramutis}, year={2010} }'
chicago: Lucinskis, Raimundas, Dalius Mazeika, Tobias Hemsel, and Ramutis Bansevicius.
“The Experimental Research of Piezoelectric Actuator with Two Vectors of Polarization
Direction.” MECHANIKA, 2010.
ieee: R. Lucinskis, D. Mazeika, T. Hemsel, and R. Bansevicius, “The experimental
research of piezoelectric actuator with two vectors of polarization direction,”
MECHANIKA, 2010.
mla: Lucinskis, Raimundas, et al. “The Experimental Research of Piezoelectric Actuator
with Two Vectors of Polarization Direction.” MECHANIKA, 2010.
short: R. Lucinskis, D. Mazeika, T. Hemsel, R. Bansevicius, MECHANIKA (2010).
date_created: 2019-05-13T10:18:38Z
date_updated: 2022-01-06T07:04:19Z
department:
- _id: '151'
language:
- iso: eng
publication: MECHANIKA
publication_identifier:
issn:
- 1948-5719
quality_controlled: '1'
status: public
title: The experimental research of piezoelectric actuator with two vectors of polarization
direction
type: journal_article
user_id: '55222'
year: '2010'
...
---
_id: '9758'
abstract:
- lang: eng
text: As a lead-free piezoelectric ceramics, (K,Na)NbO$_{3}$ is a promising material
because of its good piezoelectric properties. In this study, (K$_{1-x}$Na$_{x}$)NbO$_{3}$
ceramics were synthesized from a KNbO$_{3}$ and NaNbO$_{3}$ mixture powder prepared
by the hydrothermal reaction. The hydrothermal reaction enables the production
of high quality powder for the ceramics fabrication process. To obtain (K$_{1-x}$Na$_{x}$)NbO$_{3}$
ceramics, these two powders KNbO$_{3}$ and NaNbO$_{3}$ were mixed and then sintered
together. X-Ray diffraction analysis revealed that the solid solution ceramics
(K$_{1-x}$Na$_{x}$)NbO$_{3}$ was produced by the sintering process. The K/Na ratio
in (K$_{1-x}$Na$_{x}$)NbO$_{3}$ ceramics was optimized for the best piezoelectric
properties. The optimized forms was (K$_{0.48}$Na$_{0.52}$)NbO$_{3}$, which showed
the following piezoelectric properties; k$_{33}$=0.56, d$_{33}$=114pC/N. In addition,
the ferroelectric properties, P$_{r}$=7.72mC/cm$^{2}$, E$_{c}$=857V/mm, and the
Curie temperature T$_{c}$=420$_{o}$C were also measured.
author:
- first_name: Takafumi
full_name: Maeda, Takafumi
last_name: Maeda
- first_name: Norihito
full_name: Takiguchi, Norihito
last_name: Takiguchi
- first_name: Takeshi
full_name: Morita, Takeshi
last_name: Morita
- first_name: Mutsuo
full_name: Ishikawa, Mutsuo
last_name: Ishikawa
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
citation:
ama: Maeda T, Takiguchi N, Morita T, Ishikawa M, Hemsel T. Hydrothermal (K1-xNax)NbO3
Lead-free Piezoelectric Ceramics. Journal of Korean Physical Society. 2010;57(4):924-928.
doi:10.3938/jkps.57.924
apa: Maeda, T., Takiguchi, N., Morita, T., Ishikawa, M., & Hemsel, T. (2010).
Hydrothermal (K1-xNax)NbO3 Lead-free Piezoelectric Ceramics. Journal of Korean
Physical Society, 57(4), 924–928. https://doi.org/10.3938/jkps.57.924
bibtex: '@article{Maeda_Takiguchi_Morita_Ishikawa_Hemsel_2010, title={Hydrothermal
(K1-xNax)NbO3 Lead-free Piezoelectric Ceramics}, volume={57}, DOI={10.3938/jkps.57.924},
number={4}, journal={Journal of Korean Physical Society}, author={Maeda, Takafumi
and Takiguchi, Norihito and Morita, Takeshi and Ishikawa, Mutsuo and Hemsel, Tobias},
year={2010}, pages={924–928} }'
chicago: 'Maeda, Takafumi, Norihito Takiguchi, Takeshi Morita, Mutsuo Ishikawa,
and Tobias Hemsel. “Hydrothermal (K1-XNax)NbO3 Lead-Free Piezoelectric Ceramics.”
Journal of Korean Physical Society 57, no. 4 (2010): 924–28. https://doi.org/10.3938/jkps.57.924.'
ieee: T. Maeda, N. Takiguchi, T. Morita, M. Ishikawa, and T. Hemsel, “Hydrothermal
(K1-xNax)NbO3 Lead-free Piezoelectric Ceramics,” Journal of Korean Physical
Society, vol. 57, no. 4, pp. 924–928, 2010.
mla: Maeda, Takafumi, et al. “Hydrothermal (K1-XNax)NbO3 Lead-Free Piezoelectric
Ceramics.” Journal of Korean Physical Society, vol. 57, no. 4, 2010, pp.
924–28, doi:10.3938/jkps.57.924.
short: T. Maeda, N. Takiguchi, T. Morita, M. Ishikawa, T. Hemsel, Journal of Korean
Physical Society 57 (2010) 924–928.
date_created: 2019-05-13T10:19:43Z
date_updated: 2022-01-06T07:04:19Z
department:
- _id: '151'
doi: 10.3938/jkps.57.924
intvolume: ' 57'
issue: '4'
keyword:
- Lead-free piezoelectric material
- KNN
- Hydrothermal method
language:
- iso: eng
page: 924-928
publication: Journal of Korean Physical Society
publication_identifier:
issn:
- 1948-5719
quality_controlled: '1'
status: public
title: Hydrothermal (K1-xNax)NbO3 Lead-free Piezoelectric Ceramics
type: journal_article
user_id: '55222'
volume: 57
year: '2010'
...
---
_id: '9759'
abstract:
- lang: eng
text: Among various lead-free piezoelectric materials, (K,Na)NbO$_{3}$ is a very
promising candidate. In this study, (K,Na)NbO$_{3}$ ceramics were sintered from
mixed (K,Na)NbO$_{3}$ and NaNbO$_{3}$ powders prepared by hydrothermal reaction.
These two powders were mixed with distilled water in a KNbO$_{3}$/NaNbO$_{3}$
molar ratio of 1. After sintering the mixed powder, the solid solution of (Na,K)NbO$_{3}$
ceramics was obtained. The electrical properties such as the electromechanical
coupling factors k$_{p}$ and k$_{33}$, the mechanical quality factor, Q$_{m}$,
and the piezoelectric constant d$_{33}$ of the sintered (K,Na)NbO$_{3}$ ceramics
were 0.32, 0.48, 71 (radial mode), 118 ((33)mode), and 107 pC/N, respectively.
author:
- first_name: Takafumi
full_name: Maeda, Takafumi
last_name: Maeda
- first_name: Norihito
full_name: Takiguchi, Norihito
last_name: Takiguchi
- first_name: Takeshi
full_name: Morita, Takeshi
last_name: Morita
- first_name: Mutsuo
full_name: Ishikawa, Mutsuo
last_name: Ishikawa
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
citation:
ama: Maeda T, Takiguchi N, Morita T, Ishikawa M, Hemsel T. (K,Na)NbO3 lead-free
piezoelectric ceramics synthesized from hydrothermal powders. Materials Letters.
2010;64(2):125-128. doi:10.1016/j.matlet.2009.10.012
apa: Maeda, T., Takiguchi, N., Morita, T., Ishikawa, M., & Hemsel, T. (2010).
(K,Na)NbO3 lead-free piezoelectric ceramics synthesized from hydrothermal powders.
Materials Letters, 64(2), 125–128. https://doi.org/10.1016/j.matlet.2009.10.012
bibtex: '@article{Maeda_Takiguchi_Morita_Ishikawa_Hemsel_2010, title={(K,Na)NbO3
lead-free piezoelectric ceramics synthesized from hydrothermal powders}, volume={64},
DOI={10.1016/j.matlet.2009.10.012},
number={2}, journal={Materials Letters}, author={Maeda, Takafumi and Takiguchi,
Norihito and Morita, Takeshi and Ishikawa, Mutsuo and Hemsel, Tobias}, year={2010},
pages={125–128} }'
chicago: 'Maeda, Takafumi, Norihito Takiguchi, Takeshi Morita, Mutsuo Ishikawa,
and Tobias Hemsel. “(K,Na)NbO3 Lead-Free Piezoelectric Ceramics Synthesized from
Hydrothermal Powders.” Materials Letters 64, no. 2 (2010): 125–28. https://doi.org/10.1016/j.matlet.2009.10.012.'
ieee: T. Maeda, N. Takiguchi, T. Morita, M. Ishikawa, and T. Hemsel, “(K,Na)NbO3
lead-free piezoelectric ceramics synthesized from hydrothermal powders,” Materials
Letters, vol. 64, no. 2, pp. 125–128, 2010.
mla: Maeda, Takafumi, et al. “(K,Na)NbO3 Lead-Free Piezoelectric Ceramics Synthesized
from Hydrothermal Powders.” Materials Letters, vol. 64, no. 2, 2010, pp.
125–28, doi:10.1016/j.matlet.2009.10.012.
short: T. Maeda, N. Takiguchi, T. Morita, M. Ishikawa, T. Hemsel, Materials Letters
64 (2010) 125–128.
date_created: 2019-05-13T10:21:17Z
date_updated: 2022-01-06T07:04:19Z
department:
- _id: '151'
doi: 10.1016/j.matlet.2009.10.012
intvolume: ' 64'
issue: '2'
keyword:
- Lead-free piezoelectric material
- (K
- Na)NbO$_{3}$ ceramics
- Sintering solid solution
- Piezoelectric properties
language:
- iso: eng
page: 125-128
publication: Materials Letters
publication_identifier:
issn:
- 1948-5719
quality_controlled: '1'
status: public
title: (K,Na)NbO3 lead-free piezoelectric ceramics synthesized from hydrothermal powders
type: journal_article
user_id: '55222'
volume: 64
year: '2010'
...
---
_id: '9760'
abstract:
- lang: eng
text: Self-optimizing systems are able to adapt their behavior autonomously according
to their current self-determined objectives. Unforeseen influences could lead
to dependability-critical behavior of the system. Methods are required which secure
self-optimizing systems during operation. These methods to increase the dependability
of the system should already be taken into consideration in the design process.
This paper presents a guideline for the dependability-oriented design of self-optimizing
systems, which integrates established classical methods like failure mode and
effects analysis as well as methods based on self-optimization. On the one hand
self-optimization is used to increase the dependability of the system by integrating
objectives like safety, availability, and reliability to the objectives of the
system. On the other hand methods are required to ensure the self-optimization
itself. As basis for this guideline serves the principle solution of the system.
The six phases of the guideline extend the design process and lead to an enhanced
principle solution. Additionally, the guideline illustrates phases to implement
and validate the self-optimizing system. The proposed guideline is applied to
an innovative rail-bound vehicle, called RailCab, which is equipped with self-optimizing
function modules.
author:
- first_name: Christoph
full_name: Sondermann-Wölke, Christoph
last_name: Sondermann-Wölke
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
- first_name: Jürgen
full_name: Gausemeier, Jürgen
last_name: Gausemeier
- first_name: Sebastian
full_name: Pook, Sebastian
last_name: Pook
citation:
ama: 'Sondermann-Wölke C, Hemsel T, Sextro W, Gausemeier J, Pook S. Guideline for
the dependability-oriented design of self-optimizing systems. In: Industrial
Informatics (INDIN), 2010 8th IEEE International Conference On. ; 2010:739-744.
doi:10.1109/INDIN.2010.5549490'
apa: Sondermann-Wölke, C., Hemsel, T., Sextro, W., Gausemeier, J., & Pook, S.
(2010). Guideline for the dependability-oriented design of self-optimizing systems.
In Industrial Informatics (INDIN), 2010 8th IEEE International Conference on
(pp. 739–744). https://doi.org/10.1109/INDIN.2010.5549490
bibtex: '@inproceedings{Sondermann-Wölke_Hemsel_Sextro_Gausemeier_Pook_2010, title={Guideline
for the dependability-oriented design of self-optimizing systems}, DOI={10.1109/INDIN.2010.5549490},
booktitle={Industrial Informatics (INDIN), 2010 8th IEEE International Conference
on}, author={Sondermann-Wölke, Christoph and Hemsel, Tobias and Sextro, Walter
and Gausemeier, Jürgen and Pook, Sebastian}, year={2010}, pages={739–744} }'
chicago: Sondermann-Wölke, Christoph, Tobias Hemsel, Walter Sextro, Jürgen Gausemeier,
and Sebastian Pook. “Guideline for the Dependability-Oriented Design of Self-Optimizing
Systems.” In Industrial Informatics (INDIN), 2010 8th IEEE International Conference
On, 739–44, 2010. https://doi.org/10.1109/INDIN.2010.5549490.
ieee: C. Sondermann-Wölke, T. Hemsel, W. Sextro, J. Gausemeier, and S. Pook, “Guideline
for the dependability-oriented design of self-optimizing systems,” in Industrial
Informatics (INDIN), 2010 8th IEEE International Conference on, 2010, pp.
739–744.
mla: Sondermann-Wölke, Christoph, et al. “Guideline for the Dependability-Oriented
Design of Self-Optimizing Systems.” Industrial Informatics (INDIN), 2010 8th
IEEE International Conference On, 2010, pp. 739–44, doi:10.1109/INDIN.2010.5549490.
short: 'C. Sondermann-Wölke, T. Hemsel, W. Sextro, J. Gausemeier, S. Pook, in: Industrial
Informatics (INDIN), 2010 8th IEEE International Conference On, 2010, pp. 739–744.'
date_created: 2019-05-13T10:25:26Z
date_updated: 2022-01-06T07:04:19Z
department:
- _id: '151'
doi: 10.1109/INDIN.2010.5549490
keyword:
- RailCab
- dependability-critical behavior
- dependability-oriented design
- failure mode
- rail-bound vehicle
- secure self-optimizing systems
- self-optimizing function modules
- optimisation
- railways
- self-adjusting systems
language:
- iso: eng
page: 739 -744
publication: Industrial Informatics (INDIN), 2010 8th IEEE International Conference
on
quality_controlled: '1'
status: public
title: Guideline for the dependability-oriented design of self-optimizing systems
type: conference
user_id: '55222'
year: '2010'
...
---
_id: '9761'
abstract:
- lang: eng
text: New mechatronic systems, called self-optimizing systems, are able to adapt
their behavior according to environmental, user and system specific influences.
Self-optimizing systems are complex and due to their non-deterministic behavior
comprise hidden risks, which cannot be foreseen in the design phase of the system.
Therefore, modifications of the ISO 17359 condition monitoring policy for being
able to cope with this new kind of systems are presented. Besides avoiding critical
situations evoked by self-optimization, the proposed concept uses self-optimization
to increase the dependability of the system. This concept is applied to the active
guidance module of an innovative rail-bound vehicle. First test drives provide
information for the enhancement of the implementation of realtime switching to
appropriate control strategies. The different control strategies are investigated
in detail. It is illustrated that influences on the system like different track
sections or the desired velocity of the RailCab effect the system and can lead
to a higher amount of flange contacts, which indicate higher wear and thus a reduction
of the availability of the system. Therefore, these influences should be minded
within the condition monitoring policy. Consequently, this article presents the
condition monitoring policy for self-optimizing function modules and its application
to the active railway guidance module.
author:
- first_name: Christoph
full_name: Sondermann-Wölke, Christoph
last_name: Sondermann-Wölke
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
citation:
ama: Sondermann-Wölke C, Sextro W. Integration of Condition Monitoring in Self-optimizing
Function Modules Applied to the Active Railway Guidance Module. International
Journal On Advances in Intelligent Systems. 2010;3(1-3):65-74.
apa: Sondermann-Wölke, C., & Sextro, W. (2010). Integration of Condition Monitoring
in Self-optimizing Function Modules Applied to the Active Railway Guidance Module.
International Journal On Advances in Intelligent Systems, 3(1–3),
65–74.
bibtex: '@article{Sondermann-Wölke_Sextro_2010, title={Integration of Condition
Monitoring in Self-optimizing Function Modules Applied to the Active Railway Guidance
Module}, volume={3}, number={1–3}, journal={International Journal On Advances
in Intelligent Systems}, author={Sondermann-Wölke, Christoph and Sextro, Walter},
year={2010}, pages={65–74} }'
chicago: 'Sondermann-Wölke, Christoph, and Walter Sextro. “Integration of Condition
Monitoring in Self-Optimizing Function Modules Applied to the Active Railway Guidance
Module.” International Journal On Advances in Intelligent Systems 3, no.
1–3 (2010): 65–74.'
ieee: C. Sondermann-Wölke and W. Sextro, “Integration of Condition Monitoring in
Self-optimizing Function Modules Applied to the Active Railway Guidance Module,”
International Journal On Advances in Intelligent Systems, vol. 3, no. 1–3,
pp. 65–74, 2010.
mla: Sondermann-Wölke, Christoph, and Walter Sextro. “Integration of Condition Monitoring
in Self-Optimizing Function Modules Applied to the Active Railway Guidance Module.”
International Journal On Advances in Intelligent Systems, vol. 3, no. 1–3,
2010, pp. 65–74.
short: C. Sondermann-Wölke, W. Sextro, International Journal On Advances in Intelligent
Systems 3 (2010) 65–74.
date_created: 2019-05-13T10:27:02Z
date_updated: 2022-01-06T07:04:19Z
department:
- _id: '151'
intvolume: ' 3'
issue: 1 - 3
keyword:
- dependability
- condition monitoring
- selfoptimization
- active railway guidance module
language:
- iso: eng
page: 65 - 74
publication: International Journal On Advances in Intelligent Systems
quality_controlled: '1'
status: public
title: Integration of Condition Monitoring in Self-optimizing Function Modules Applied
to the Active Railway Guidance Module
type: journal_article
user_id: '55222'
volume: 3
year: '2010'
...
---
_id: '9762'
abstract:
- lang: eng
text: Die erweiterten Möglichkeiten der Informationsverarbeitung mechatronischer
Systeme erlauben es, mechatronische Systeme selbstoptimierend zu gestalten. Dabei
bezieht sich die Selbstoptimierung auf die Fähigkeit des Systems, sich an die
aktuelle Umfeldsituation anzupassen; wobei das System im Allgemeinen mehrere relevante
Ziele verfolgt. Wurde eine Umfeldveränderung bemerkt, so müssen diese Ziele an
die neue Situation angepasst und das resultierende Verhalten ausgewählt werden.
In diesem Beitrag wird das selbstoptimierende Spurführungsmodul näher untersucht.
Das Spurführungsmodul ist Bestandteil eines innovativen schienengebundenen Verkehrssystems,
genannt RailCab, und dient zur Lenkung des einzelnen Fahrzeugs. Ziele des Spurführungsmoduls
bestehen darin, die Verlässlichkeit des Spurführungsmoduls zu erhöhen sowie möglichst
wenig Energie zu verbrauchen. Um kritische Systemzustände zu erkennen bzw. frühzeitig
zu verhindern wird eine Vorgehensweise zur Einrichtung einer Zustandsüberwachung
für selbstoptimierende Systeme beschrieben. Diese wird auf dem realen Versuchsträger
im Maßstab 1:2,5 implementiert. Die Auswertung von Versuchsfahrten zeigt, dass
gerade beim Auftreten eines Fehlers das Umschalten vom Ziel ''Energieverbrauch
minimieren`` auf das Ziel ''Verlässlichkeit maximieren`` sinnvoll ist.
author:
- first_name: Christoph
full_name: Sondermann-Wölke, Christoph
last_name: Sondermann-Wölke
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
- first_name: Jens
full_name: Geisler, Jens
last_name: Geisler
- first_name: Ansgar
full_name: Trächtler, Ansgar
last_name: Trächtler
citation:
ama: 'Sondermann-Wölke C, Sextro W, Geisler J, Trächtler A. Experimentelle Untersuchung
der Selbstoptimierung innerhalb des RailCab-Spurführungsmoduls. In: Gausemeier
J, Rammig FJ, Trächtler A, eds. Entwurf Mechatronischer Systeme. Vol 272.
HNI-Verlagsschriftenreihe. Paderborn; 2010:411-420.'
apa: Sondermann-Wölke, C., Sextro, W., Geisler, J., & Trächtler, A. (2010).
Experimentelle Untersuchung der Selbstoptimierung innerhalb des RailCab-Spurführungsmoduls.
In J. Gausemeier, F. J. Rammig, & A. Trächtler (Eds.), Entwurf mechatronischer
Systeme (Vol. 272, pp. 411–420). Paderborn.
bibtex: '@inproceedings{Sondermann-Wölke_Sextro_Geisler_Trächtler_2010, place={Paderborn},
series={HNI-Verlagsschriftenreihe}, title={Experimentelle Untersuchung der Selbstoptimierung
innerhalb des RailCab-Spurführungsmoduls}, volume={272}, booktitle={Entwurf mechatronischer
Systeme}, author={Sondermann-Wölke, Christoph and Sextro, Walter and Geisler,
Jens and Trächtler, Ansgar}, editor={Gausemeier, Jürgen and Rammig, Frans Josef
and Trächtler, AnsgarEditors}, year={2010}, pages={411–420}, collection={HNI-Verlagsschriftenreihe}
}'
chicago: Sondermann-Wölke, Christoph, Walter Sextro, Jens Geisler, and Ansgar Trächtler.
“Experimentelle Untersuchung Der Selbstoptimierung Innerhalb Des RailCab-Spurführungsmoduls.”
In Entwurf Mechatronischer Systeme, edited by Jürgen Gausemeier, Frans
Josef Rammig, and Ansgar Trächtler, 272:411–20. HNI-Verlagsschriftenreihe. Paderborn,
2010.
ieee: C. Sondermann-Wölke, W. Sextro, J. Geisler, and A. Trächtler, “Experimentelle
Untersuchung der Selbstoptimierung innerhalb des RailCab-Spurführungsmoduls,”
in Entwurf mechatronischer Systeme, 2010, vol. 272, pp. 411–420.
mla: Sondermann-Wölke, Christoph, et al. “Experimentelle Untersuchung Der Selbstoptimierung
Innerhalb Des RailCab-Spurführungsmoduls.” Entwurf Mechatronischer Systeme,
edited by Jürgen Gausemeier et al., vol. 272, 2010, pp. 411–20.
short: 'C. Sondermann-Wölke, W. Sextro, J. Geisler, A. Trächtler, in: J. Gausemeier,
F.J. Rammig, A. Trächtler (Eds.), Entwurf Mechatronischer Systeme, Paderborn,
2010, pp. 411–420.'
date_created: 2019-05-13T10:28:04Z
date_updated: 2022-01-06T07:04:19Z
department:
- _id: '151'
editor:
- first_name: Jürgen
full_name: Gausemeier, Jürgen
last_name: Gausemeier
- first_name: Frans Josef
full_name: Rammig, Frans Josef
last_name: Rammig
- first_name: Ansgar
full_name: Trächtler, Ansgar
last_name: Trächtler
intvolume: ' 272'
keyword:
- Selbstoptimierung
- Spurführungsmodul
language:
- iso: eng
page: 411 - 420
place: Paderborn
publication: Entwurf mechatronischer Systeme
quality_controlled: '1'
series_title: HNI-Verlagsschriftenreihe
status: public
title: Experimentelle Untersuchung der Selbstoptimierung innerhalb des RailCab-Spurführungsmoduls
type: conference
user_id: '55222'
volume: 272
year: '2010'
...
---
_id: '9763'
abstract:
- lang: eng
text: Recent advances in information processing enable new kinds of technical systems,
called self-optimizing systems. These systems are able to adapt their objectives
and their behavior according to the current situation and influences autonomously.
This behavior adaptation is non-deterministic and hence self-optimization is a
risk to the system, e.g. if the result of the self-optimization process does not
match the suddenly changed situation. In contrary, self-optimization could be
used to increase the dependability by pursuing objectives like reliability and
availability. In our preceding publications we introduced the so called multi-level
dependability concept to cope with this new kind of systems (cf. [6]). This concept
comprises the monitoring of the system behavior, the classification of the current
situation, and the selection of the appropriate measure, if reliability limits
are exceeded. In this paper we present for the first time experimental results.
The dependability concept is implemented in the self-optimizing active guidance
system of a railway vehicle. The test drives illustrate clearly that the proposed
concept is able to cope with, e.g., sensor failures, and is able to increase the
reliability and availability of the active guidance module.
author:
- first_name: Christoph
full_name: Sondermann-Wölke, Christoph
last_name: Sondermann-Wölke
- first_name: Jens
full_name: Geisler, Jens
last_name: Geisler
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
citation:
ama: 'Sondermann-Wölke C, Geisler J, Sextro W. Increasing the reliability of a self-optimizing
railway guidance system. In: Reliability and Maintainability Symposium (RAMS),
2010 Proceedings - Annual. ; 2010:1-6. doi:10.1109/RAMS.2010.5448080'
apa: Sondermann-Wölke, C., Geisler, J., & Sextro, W. (2010). Increasing the
reliability of a self-optimizing railway guidance system. In Reliability and
Maintainability Symposium (RAMS), 2010 Proceedings - Annual (pp. 1–6). https://doi.org/10.1109/RAMS.2010.5448080
bibtex: '@inproceedings{Sondermann-Wölke_Geisler_Sextro_2010, title={Increasing
the reliability of a self-optimizing railway guidance system}, DOI={10.1109/RAMS.2010.5448080},
booktitle={Reliability and Maintainability Symposium (RAMS), 2010 Proceedings
- Annual}, author={Sondermann-Wölke, Christoph and Geisler, Jens and Sextro, Walter},
year={2010}, pages={1–6} }'
chicago: Sondermann-Wölke, Christoph, Jens Geisler, and Walter Sextro. “Increasing
the Reliability of a Self-Optimizing Railway Guidance System.” In Reliability
and Maintainability Symposium (RAMS), 2010 Proceedings - Annual, 1–6, 2010.
https://doi.org/10.1109/RAMS.2010.5448080.
ieee: C. Sondermann-Wölke, J. Geisler, and W. Sextro, “Increasing the reliability
of a self-optimizing railway guidance system,” in Reliability and Maintainability
Symposium (RAMS), 2010 Proceedings - Annual, 2010, pp. 1–6.
mla: Sondermann-Wölke, Christoph, et al. “Increasing the Reliability of a Self-Optimizing
Railway Guidance System.” Reliability and Maintainability Symposium (RAMS),
2010 Proceedings - Annual, 2010, pp. 1–6, doi:10.1109/RAMS.2010.5448080.
short: 'C. Sondermann-Wölke, J. Geisler, W. Sextro, in: Reliability and Maintainability
Symposium (RAMS), 2010 Proceedings - Annual, 2010, pp. 1–6.'
date_created: 2019-05-13T10:35:39Z
date_updated: 2022-01-06T07:04:19Z
department:
- _id: '151'
doi: 10.1109/RAMS.2010.5448080
keyword:
- availability
- dependability concept
- multilevel dependability concept
- railway vehicle
- reliability
- self optimizing active guidance system
- self optimizing railway guidance system
- situation classification
- system behavior monitoring
- optimal control
- railways
- reliability theory
- self-adjusting systems
language:
- iso: eng
page: 1 -6
publication: Reliability and Maintainability Symposium (RAMS), 2010 Proceedings -
Annual
publication_identifier:
issn:
- 0149-144X
quality_controlled: '1'
status: public
title: Increasing the reliability of a self-optimizing railway guidance system
type: conference
user_id: '55222'
year: '2010'
...
---
_id: '30085'
author:
- first_name: Elena
full_name: Ficara, Elena
id: '35768'
last_name: Ficara
citation:
ama: Ficara E. Ursprünge des Ausdrucks ’das Logische’ beim frühen Hegel. Archiv
für Begriffsgeschichte . 2010;52:113-125.
apa: Ficara, E. (2010). Ursprünge des Ausdrucks ’das Logische’ beim frühen Hegel.
Archiv für Begriffsgeschichte , 52, 113–125.
bibtex: '@article{Ficara_2010, title={Ursprünge des Ausdrucks ’das Logische’ beim
frühen Hegel}, volume={52}, journal={Archiv für Begriffsgeschichte }, author={Ficara,
Elena}, year={2010}, pages={113–125} }'
chicago: 'Ficara, Elena. “Ursprünge des Ausdrucks ’das Logische’ beim frühen Hegel.”
Archiv für Begriffsgeschichte 52 (2010): 113–25.'
ieee: E. Ficara, “Ursprünge des Ausdrucks ’das Logische’ beim frühen Hegel,” Archiv
für Begriffsgeschichte , vol. 52, pp. 113–125, 2010.
mla: Ficara, Elena. “Ursprünge des Ausdrucks ’das Logische’ beim frühen Hegel.”
Archiv für Begriffsgeschichte , vol. 52, 2010, pp. 113–25.
short: E. Ficara, Archiv für Begriffsgeschichte 52 (2010) 113–125.
date_created: 2022-02-24T16:58:58Z
date_updated: 2022-03-01T12:07:10Z
extern: '1'
intvolume: ' 52'
language:
- iso: ger
page: 113 - 125
publication: 'Archiv für Begriffsgeschichte '
quality_controlled: '1'
status: public
title: Ursprünge des Ausdrucks ’das Logische’ beim frühen Hegel
type: journal_article
user_id: '35768'
volume: 52
year: '2010'
...
---
_id: '30083'
author:
- first_name: Elena
full_name: Ficara, Elena
id: '35768'
last_name: Ficara
citation:
ama: Ficara E. Immagini della dialettica hegeliana. La croce e la rosa. Archivio
di storia della cultura. 2010;XXIII:271-285.
apa: Ficara, E. (2010). Immagini della dialettica hegeliana. La croce e la rosa.
Archivio di storia della cultura, XXIII, 271–285.
bibtex: '@article{Ficara_2010, title={Immagini della dialettica hegeliana. La croce
e la rosa.}, volume={XXIII}, journal={Archivio di storia della cultura}, author={Ficara,
Elena}, year={2010}, pages={271–285} }'
chicago: 'Ficara, Elena. “Immagini della dialettica hegeliana. La croce e la rosa.”
Archivio di storia della cultura XXIII (2010): 271–85.'
ieee: E. Ficara, “Immagini della dialettica hegeliana. La croce e la rosa.,” Archivio
di storia della cultura, vol. XXIII, pp. 271–285, 2010.
mla: Ficara, Elena. “Immagini della dialettica hegeliana. La croce e la rosa.” Archivio
di storia della cultura, vol. XXIII, 2010, pp. 271–85.
short: E. Ficara, Archivio di storia della cultura XXIII (2010) 271–285.
date_created: 2022-02-24T14:33:55Z
date_updated: 2022-03-01T12:07:14Z
extern: '1'
language:
- iso: ita
page: 271 - 285
publication: Archivio di storia della cultura
quality_controlled: '1'
status: public
title: Immagini della dialettica hegeliana. La croce e la rosa.
type: journal_article
user_id: '35768'
volume: XXIII
year: '2010'
...
---
_id: '30082'
author:
- first_name: Elena
full_name: Ficara, Elena
id: '35768'
last_name: Ficara
citation:
ama: Ficara E. Hegel’s Dialectic in Contemporary Philosophy. Idealistic Studies.
2010;39:87-97.
apa: Ficara, E. (2010). Hegel’s Dialectic in Contemporary Philosophy. Idealistic
Studies, 39, 87–97.
bibtex: '@article{Ficara_2010, title={Hegel’s Dialectic in Contemporary Philosophy},
volume={39}, journal={Idealistic Studies}, author={Ficara, Elena}, year={2010},
pages={87–97} }'
chicago: 'Ficara, Elena. “Hegel’s Dialectic in Contemporary Philosophy.” Idealistic
Studies 39 (2010): 87–97.'
ieee: E. Ficara, “Hegel’s Dialectic in Contemporary Philosophy,” Idealistic Studies,
vol. 39, pp. 87–97, 2010.
mla: Ficara, Elena. “Hegel’s Dialectic in Contemporary Philosophy.” Idealistic
Studies, vol. 39, 2010, pp. 87–97.
short: E. Ficara, Idealistic Studies 39 (2010) 87–97.
date_created: 2022-02-24T14:29:28Z
date_updated: 2022-03-01T12:07:22Z
extern: '1'
intvolume: ' 39'
language:
- iso: eng
page: 87 - 97
publication: Idealistic Studies
quality_controlled: '1'
status: public
title: Hegel’s Dialectic in Contemporary Philosophy
type: journal_article
user_id: '35768'
volume: 39
year: '2010'
...
---
_id: '22050'
abstract:
- lang: eng
text: Generative production techniques have the advantage of manufacturing parts
via an additive process without needing a forming tool. One of these additive
manufacturing technologies is “Fused Deposition Modeling” (FDM). From a 3D-CAD
data set, components and assemblies are manufactured out of thermoplastic material
in only a few working steps. Native software automatically slices the data, calculates
the support structures, and creates toolpaths. The parts then are built up layer
by layer by means of an additive process. An extrusion head deposits the molten
thermoplastic filament to create each layer. This technology began as a process
for creating prototype parts; recently it has found new utility in the production
of manufacturing tools and as a manufacturing process for end-use parts. In order
to be used as a part for serial production, the components must possess the required
mechanical properties. To this end, not only is the chosen material relevant,
but a correct process control is also necessary. An interesting material for the
aircraft and automotive industry is the material PEI with the trade name Ultem*9085.
This material should typically be used on FDM-machines for the manufacturing of
end products. The aim of the research is to determine the present mechanical data
based on the process control, as well as reproducibility from job to job. In this
work the influence of the orientation and the structure of the manufactured parts
based on the mechanical data are analyzed. Sample parts are generated with the
given parameters of the native software based upon the CAD data. First, specimens
were analyzed concerning their geometry and configuration. The dimensions and
weight were measured. The mechanical tests conducted were the tensile and compression
tests.
author:
- first_name: A.
full_name: Bagsik, A.
last_name: Bagsik
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
- first_name: E.
full_name: Klemp, E.
last_name: Klemp
citation:
ama: 'Bagsik A, Schöppner V, Klemp E. FDM Part Quality Manufactured with ULTEM 9085.
In: Proceedings of International Conference Polymeric Materials. ; 2010.
doi:https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html'
apa: Bagsik, A., Schöppner, V., & Klemp, E. (2010). FDM Part Quality Manufactured
with ULTEM 9085. Proceedings of International Conference Polymeric Materials.
https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html
bibtex: '@inproceedings{Bagsik_Schöppner_Klemp_2010, title={FDM Part Quality Manufactured
with ULTEM 9085}, DOI={https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html},
booktitle={Proceedings of International Conference Polymeric Materials}, author={Bagsik,
A. and Schöppner, Volker and Klemp, E.}, year={2010} }'
chicago: Bagsik, A., Volker Schöppner, and E. Klemp. “FDM Part Quality Manufactured
with ULTEM 9085.” In Proceedings of International Conference Polymeric Materials,
2010. https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html.
ieee: 'A. Bagsik, V. Schöppner, and E. Klemp, “FDM Part Quality Manufactured with
ULTEM 9085,” 2010, doi: https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html.'
mla: Bagsik, A., et al. “FDM Part Quality Manufactured with ULTEM 9085.” Proceedings
of International Conference Polymeric Materials, 2010, doi:https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html.
short: 'A. Bagsik, V. Schöppner, E. Klemp, in: Proceedings of International Conference
Polymeric Materials, 2010.'
date_created: 2021-05-07T13:23:34Z
date_updated: 2022-04-25T08:04:26Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '9'
doi: https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html
language:
- iso: eng
publication: Proceedings of International Conference Polymeric Materials
publication_identifier:
isbn:
- 978-3-868-29282-4
quality_controlled: '1'
status: public
title: FDM Part Quality Manufactured with ULTEM 9085
type: conference
user_id: '70729'
year: '2010'
...
---
_id: '28050'
author:
- first_name: Bea
full_name: Bloh, Bea
id: '69910'
last_name: Bloh
citation:
ama: 'Bloh B. Schulleitungstypen und ihr Zusammenhang zur Schulqualität. In: Berkemeyer
N, Bonsen M, Harazd B, eds. Jahrbuch der Schulentwicklung. Vol 16. ; 2010:261-288.'
apa: Bloh, B. (2010). Schulleitungstypen und ihr Zusammenhang zur Schulqualität.
In N. Berkemeyer, M. Bonsen, & B. Harazd (Eds.), Jahrbuch der Schulentwicklung
(Vol. 16, pp. 261–288).
bibtex: '@inbook{Bloh_2010, title={Schulleitungstypen und ihr Zusammenhang zur Schulqualität},
volume={16}, booktitle={Jahrbuch der Schulentwicklung}, author={Bloh, Bea}, editor={Berkemeyer,
N. and Bonsen, M. and Harazd, B.}, year={2010}, pages={261–288} }'
chicago: Bloh, Bea. “Schulleitungstypen und ihr Zusammenhang zur Schulqualität.”
In Jahrbuch der Schulentwicklung, edited by N. Berkemeyer, M. Bonsen, and
B. Harazd, 16:261–88, 2010.
ieee: B. Bloh, “Schulleitungstypen und ihr Zusammenhang zur Schulqualität,” in Jahrbuch
der Schulentwicklung, vol. 16, N. Berkemeyer, M. Bonsen, and B. Harazd, Eds.
2010, pp. 261–288.
mla: Bloh, Bea. “Schulleitungstypen und ihr Zusammenhang zur Schulqualität.” Jahrbuch
der Schulentwicklung, edited by N. Berkemeyer et al., vol. 16, 2010, pp. 261–88.
short: 'B. Bloh, in: N. Berkemeyer, M. Bonsen, B. Harazd (Eds.), Jahrbuch der Schulentwicklung,
2010, pp. 261–288.'
date_created: 2021-11-29T15:33:26Z
date_updated: 2022-01-13T19:09:44Z
department:
- _id: '36'
- _id: '456'
editor:
- first_name: N.
full_name: Berkemeyer, N.
last_name: Berkemeyer
- first_name: M.
full_name: Bonsen, M.
last_name: Bonsen
- first_name: B.
full_name: Harazd, B.
last_name: Harazd
extern: '1'
intvolume: ' 16'
language:
- iso: ger
page: 261-288
publication: Jahrbuch der Schulentwicklung
quality_controlled: '1'
status: public
title: Schulleitungstypen und ihr Zusammenhang zur Schulqualität
type: book_chapter
user_id: '49044'
volume: 16
year: '2010'
...
---
_id: '28055'
author:
- first_name: Bea
full_name: Bloh, Bea
id: '69910'
last_name: Bloh
- first_name: Kerstin
full_name: Drossel, Kerstin
last_name: Drossel
citation:
ama: Bloh B, Drossel K. Schulleitungshandeln und Lehrerkooperation. Wie das Kollegium
zur Zusammenarbeit angeregt werden kann. Schulverwaltung Baden-Württemberg.
2010;12:254-257.
apa: Bloh, B., & Drossel, K. (2010). Schulleitungshandeln und Lehrerkooperation.
Wie das Kollegium zur Zusammenarbeit angeregt werden kann. Schulverwaltung
Baden-Württemberg, 12, 254–257.
bibtex: '@article{Bloh_Drossel_2010, title={Schulleitungshandeln und Lehrerkooperation.
Wie das Kollegium zur Zusammenarbeit angeregt werden kann.}, volume={12}, journal={Schulverwaltung
Baden-Württemberg}, author={Bloh, Bea and Drossel, Kerstin}, year={2010}, pages={254–257}
}'
chicago: 'Bloh, Bea, and Kerstin Drossel. “Schulleitungshandeln und Lehrerkooperation.
Wie das Kollegium zur Zusammenarbeit angeregt werden kann.” Schulverwaltung
Baden-Württemberg 12 (2010): 254–57.'
ieee: B. Bloh and K. Drossel, “Schulleitungshandeln und Lehrerkooperation. Wie das
Kollegium zur Zusammenarbeit angeregt werden kann.,” Schulverwaltung Baden-Württemberg,
vol. 12, pp. 254–257, 2010.
mla: Bloh, Bea, and Kerstin Drossel. “Schulleitungshandeln und Lehrerkooperation.
Wie das Kollegium zur Zusammenarbeit angeregt werden kann.” Schulverwaltung
Baden-Württemberg, vol. 12, 2010, pp. 254–57.
short: B. Bloh, K. Drossel, Schulverwaltung Baden-Württemberg 12 (2010) 254–257.
date_created: 2021-11-29T15:49:39Z
date_updated: 2022-01-13T19:09:03Z
department:
- _id: '36'
- _id: '456'
extern: '1'
intvolume: ' 12'
language:
- iso: ger
page: 254-257
publication: Schulverwaltung Baden-Württemberg
quality_controlled: '1'
status: public
title: Schulleitungshandeln und Lehrerkooperation. Wie das Kollegium zur Zusammenarbeit
angeregt werden kann.
type: journal_article
user_id: '49044'
volume: 12
year: '2010'
...
---
_id: '28053'
author:
- first_name: Mario
full_name: Gieske, Mario
last_name: Gieske
- first_name: Bea
full_name: Bloh, Bea
id: '69910'
last_name: Bloh
- first_name: Julia
full_name: Gerick, Julia
last_name: Gerick
citation:
ama: 'Gieske M, Bloh B, Gerick J. Was Lehrkräfte stresst – Das Beanspruchungspotenzial
von schulischen Arbeitsbedingungen. Beruf: Schulleitung. Published online
2010:16-17.'
apa: 'Gieske, M., Bloh, B., & Gerick, J. (2010). Was Lehrkräfte stresst – Das
Beanspruchungspotenzial von schulischen Arbeitsbedingungen. Beruf: Schulleitung,
16–17.'
bibtex: '@article{Gieske_Bloh_Gerick_2010, title={Was Lehrkräfte stresst – Das Beanspruchungspotenzial
von schulischen Arbeitsbedingungen.}, journal={Beruf: Schulleitung}, author={Gieske,
Mario and Bloh, Bea and Gerick, Julia}, year={2010}, pages={16–17} }'
chicago: 'Gieske, Mario, Bea Bloh, and Julia Gerick. “Was Lehrkräfte stresst – Das
Beanspruchungspotenzial von schulischen Arbeitsbedingungen.” Beruf: Schulleitung,
2010, 16–17.'
ieee: 'M. Gieske, B. Bloh, and J. Gerick, “Was Lehrkräfte stresst – Das Beanspruchungspotenzial
von schulischen Arbeitsbedingungen.,” Beruf: Schulleitung, pp. 16–17, 2010.'
mla: 'Gieske, Mario, et al. “Was Lehrkräfte stresst – Das Beanspruchungspotenzial
von schulischen Arbeitsbedingungen.” Beruf: Schulleitung, 2010, pp. 16–17.'
short: 'M. Gieske, B. Bloh, J. Gerick, Beruf: Schulleitung (2010) 16–17.'
date_created: 2021-11-29T15:36:47Z
date_updated: 2022-01-13T19:09:20Z
department:
- _id: '36'
- _id: '456'
extern: '1'
language:
- iso: ger
page: 16-17
publication: 'Beruf: Schulleitung'
quality_controlled: '1'
status: public
title: Was Lehrkräfte stresst – Das Beanspruchungspotenzial von schulischen Arbeitsbedingungen.
type: journal_article
user_id: '49044'
year: '2010'
...
---
_id: '28054'
author:
- first_name: Mario
full_name: Gieske, Mario
last_name: Gieske
- first_name: Bea
full_name: Bloh, Bea
id: '69910'
last_name: Bloh
- first_name: Julia
full_name: Gerick, Julia
last_name: Gerick
citation:
ama: Gieske M, Bloh B, Gerick J. Delegation in Schulen. Impulse. 2010;1:22-24.
apa: Gieske, M., Bloh, B., & Gerick, J. (2010). Delegation in Schulen. Impulse,
1, 22–24.
bibtex: '@article{Gieske_Bloh_Gerick_2010, title={Delegation in Schulen}, volume={1},
journal={Impulse}, author={Gieske, Mario and Bloh, Bea and Gerick, Julia}, year={2010},
pages={22–24} }'
chicago: 'Gieske, Mario, Bea Bloh, and Julia Gerick. “Delegation in Schulen.” Impulse
1 (2010): 22–24.'
ieee: M. Gieske, B. Bloh, and J. Gerick, “Delegation in Schulen,” Impulse,
vol. 1, pp. 22–24, 2010.
mla: Gieske, Mario, et al. “Delegation in Schulen.” Impulse, vol. 1, 2010,
pp. 22–24.
short: M. Gieske, B. Bloh, J. Gerick, Impulse 1 (2010) 22–24.
date_created: 2021-11-29T15:38:02Z
date_updated: 2022-01-13T19:09:32Z
department:
- _id: '36'
- _id: '456'
extern: '1'
intvolume: ' 1'
language:
- iso: ger
page: 22-24
publication: Impulse
quality_controlled: '1'
status: public
title: Delegation in Schulen
type: journal_article
user_id: '49044'
volume: 1
year: '2010'
...
---
_id: '28051'
author:
- first_name: Bea
full_name: Bloh, Bea
id: '69910'
last_name: Bloh
- first_name: Mario
full_name: Gieske, Mario
last_name: Gieske
- first_name: H.-G
full_name: Rolff, H.-G
last_name: Rolff
citation:
ama: Bloh B, Gieske M, Rolff H-G. Gesundheitsförderliches Leitungshandeln in
der Schule. Hinweise für eine gute und gesunde Schule.; 2010.
apa: Bloh, B., Gieske, M., & Rolff, H.-G. (2010). Gesundheitsförderliches
Leitungshandeln in der Schule. Hinweise für eine gute und gesunde Schule.
bibtex: '@book{Bloh_Gieske_Rolff_2010, title={Gesundheitsförderliches Leitungshandeln
in der Schule. Hinweise für eine gute und gesunde Schule}, author={Bloh, Bea and
Gieske, Mario and Rolff, H.-G}, year={2010} }'
chicago: Bloh, Bea, Mario Gieske, and H.-G Rolff. Gesundheitsförderliches Leitungshandeln
in der Schule. Hinweise für eine gute und gesunde Schule, 2010.
ieee: B. Bloh, M. Gieske, and H.-G. Rolff, Gesundheitsförderliches Leitungshandeln
in der Schule. Hinweise für eine gute und gesunde Schule. 2010.
mla: Bloh, Bea, et al. Gesundheitsförderliches Leitungshandeln in der Schule.
Hinweise für eine gute und gesunde Schule. 2010.
short: B. Bloh, M. Gieske, H.-G. Rolff, Gesundheitsförderliches Leitungshandeln
in der Schule. Hinweise für eine gute und gesunde Schule, 2010.
date_created: 2021-11-29T15:35:06Z
date_updated: 2022-01-13T19:09:58Z
department:
- _id: '36'
- _id: '456'
extern: '1'
language:
- iso: ger
publication_status: published
quality_controlled: '1'
status: public
title: Gesundheitsförderliches Leitungshandeln in der Schule. Hinweise für eine gute
und gesunde Schule
type: book
user_id: '49044'
year: '2010'
...
---
_id: '35345'
article_type: original
author:
- first_name: Javier
full_name: Pérez Quiñones, Javier
last_name: Pérez Quiñones
- first_name: Richard
full_name: Szopko, Richard
last_name: Szopko
- first_name: Claudia
full_name: Schmidt, Claudia
id: '466'
last_name: Schmidt
orcid: 0000-0003-3179-9997
- first_name: Carlos
full_name: Peniche Covas, Carlos
last_name: Peniche Covas
citation:
ama: 'Pérez Quiñones J, Szopko R, Schmidt C, Peniche Covas C. Novel drug delivery
systems: Chitosan conjugates covalently attached to steroids with potential anticancer
and agrochemical activity. Carbohydrate Polymers. 2010;84(3):858-864. doi:10.1016/j.carbpol.2010.12.007'
apa: 'Pérez Quiñones, J., Szopko, R., Schmidt, C., & Peniche Covas, C. (2010).
Novel drug delivery systems: Chitosan conjugates covalently attached to steroids
with potential anticancer and agrochemical activity. Carbohydrate Polymers,
84(3), 858–864. https://doi.org/10.1016/j.carbpol.2010.12.007'
bibtex: '@article{Pérez Quiñones_Szopko_Schmidt_Peniche Covas_2010, title={Novel
drug delivery systems: Chitosan conjugates covalently attached to steroids with
potential anticancer and agrochemical activity}, volume={84}, DOI={10.1016/j.carbpol.2010.12.007},
number={3}, journal={Carbohydrate Polymers}, publisher={Elsevier BV}, author={Pérez
Quiñones, Javier and Szopko, Richard and Schmidt, Claudia and Peniche Covas, Carlos},
year={2010}, pages={858–864} }'
chicago: 'Pérez Quiñones, Javier, Richard Szopko, Claudia Schmidt, and Carlos Peniche
Covas. “Novel Drug Delivery Systems: Chitosan Conjugates Covalently Attached to
Steroids with Potential Anticancer and Agrochemical Activity.” Carbohydrate
Polymers 84, no. 3 (2010): 858–64. https://doi.org/10.1016/j.carbpol.2010.12.007.'
ieee: 'J. Pérez Quiñones, R. Szopko, C. Schmidt, and C. Peniche Covas, “Novel drug
delivery systems: Chitosan conjugates covalently attached to steroids with potential
anticancer and agrochemical activity,” Carbohydrate Polymers, vol. 84,
no. 3, pp. 858–864, 2010, doi: 10.1016/j.carbpol.2010.12.007.'
mla: 'Pérez Quiñones, Javier, et al. “Novel Drug Delivery Systems: Chitosan Conjugates
Covalently Attached to Steroids with Potential Anticancer and Agrochemical Activity.”
Carbohydrate Polymers, vol. 84, no. 3, Elsevier BV, 2010, pp. 858–64, doi:10.1016/j.carbpol.2010.12.007.'
short: J. Pérez Quiñones, R. Szopko, C. Schmidt, C. Peniche Covas, Carbohydrate
Polymers 84 (2010) 858–864.
date_created: 2023-01-06T13:10:01Z
date_updated: 2023-01-07T11:31:00Z
department:
- _id: '2'
- _id: '315'
doi: 10.1016/j.carbpol.2010.12.007
intvolume: ' 84'
issue: '3'
keyword:
- Materials Chemistry
- Polymers and Plastics
- Organic Chemistry
language:
- iso: eng
page: 858-864
publication: Carbohydrate Polymers
publication_identifier:
issn:
- 0144-8617
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: 'Novel drug delivery systems: Chitosan conjugates covalently attached to steroids
with potential anticancer and agrochemical activity'
type: journal_article
user_id: '466'
volume: 84
year: '2010'
...
---
_id: '35348'
article_type: original
author:
- first_name: B.
full_name: Medronho, B.
last_name: Medronho
- first_name: Claudia
full_name: Schmidt, Claudia
id: '466'
last_name: Schmidt
orcid: 0000-0003-3179-9997
- first_name: U.
full_name: Olsson, U.
last_name: Olsson
- first_name: M. G.
full_name: Miguel, M. G.
last_name: Miguel
citation:
ama: Medronho B, Schmidt C, Olsson U, Miguel MG. Size Determination of Shear-Induced
Multilamellar Vesicles by Rheo-NMR Spectroscopy. Langmuir. 2010;26(3):1477-1481.
doi:10.1021/la903682p
apa: Medronho, B., Schmidt, C., Olsson, U., & Miguel, M. G. (2010). Size Determination
of Shear-Induced Multilamellar Vesicles by Rheo-NMR Spectroscopy. Langmuir,
26(3), 1477–1481. https://doi.org/10.1021/la903682p
bibtex: '@article{Medronho_Schmidt_Olsson_Miguel_2010, title={Size Determination
of Shear-Induced Multilamellar Vesicles by Rheo-NMR Spectroscopy}, volume={26},
DOI={10.1021/la903682p}, number={3},
journal={Langmuir}, publisher={American Chemical Society (ACS)}, author={Medronho,
B. and Schmidt, Claudia and Olsson, U. and Miguel, M. G.}, year={2010}, pages={1477–1481}
}'
chicago: 'Medronho, B., Claudia Schmidt, U. Olsson, and M. G. Miguel. “Size Determination
of Shear-Induced Multilamellar Vesicles by Rheo-NMR Spectroscopy.” Langmuir
26, no. 3 (2010): 1477–81. https://doi.org/10.1021/la903682p.'
ieee: 'B. Medronho, C. Schmidt, U. Olsson, and M. G. Miguel, “Size Determination
of Shear-Induced Multilamellar Vesicles by Rheo-NMR Spectroscopy,” Langmuir,
vol. 26, no. 3, pp. 1477–1481, 2010, doi: 10.1021/la903682p.'
mla: Medronho, B., et al. “Size Determination of Shear-Induced Multilamellar Vesicles
by Rheo-NMR Spectroscopy.” Langmuir, vol. 26, no. 3, American Chemical
Society (ACS), 2010, pp. 1477–81, doi:10.1021/la903682p.
short: B. Medronho, C. Schmidt, U. Olsson, M.G. Miguel, Langmuir 26 (2010) 1477–1481.
date_created: 2023-01-06T13:11:12Z
date_updated: 2023-01-07T11:29:31Z
department:
- _id: '2'
- _id: '315'
doi: 10.1021/la903682p
intvolume: ' 26'
issue: '3'
keyword:
- Electrochemistry
- Spectroscopy
- Surfaces and Interfaces
- Condensed Matter Physics
- General Materials Science
language:
- iso: eng
page: 1477-1481
publication: Langmuir
publication_identifier:
issn:
- 0743-7463
- 1520-5827
publication_status: published
publisher: American Chemical Society (ACS)
quality_controlled: '1'
status: public
title: Size Determination of Shear-Induced Multilamellar Vesicles by Rheo-NMR Spectroscopy
type: journal_article
user_id: '466'
volume: 26
year: '2010'
...