---
_id: '58133'
author:
- first_name: Sudipta
full_name: Pramanik, Sudipta
last_name: Pramanik
- first_name: Dennis
full_name: Mileaege, Dennis
last_name: Mileaege
- first_name: Anatolii
full_name: Andreiev, Anatolii
id: '50215'
last_name: Andreiev
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: Pramanik S, Mileaege D, Andreiev A, Hoyer K-P, Schaper M. Effect of Compression
Rate and Pore Size Distribution on the Compression Behavior of Additively Manufactured
Bio-inspired Fe3Si Microporous Material. Journal of Materials Engineering and
Performance. Published online 2025. doi:10.1007/s11665-024-10618-z
apa: Pramanik, S., Mileaege, D., Andreiev, A., Hoyer, K.-P., & Schaper, M. (2025).
Effect of Compression Rate and Pore Size Distribution on the Compression Behavior
of Additively Manufactured Bio-inspired Fe3Si Microporous Material. Journal
of Materials Engineering and Performance. https://doi.org/10.1007/s11665-024-10618-z
bibtex: '@article{Pramanik_Mileaege_Andreiev_Hoyer_Schaper_2025, title={Effect of
Compression Rate and Pore Size Distribution on the Compression Behavior of Additively
Manufactured Bio-inspired Fe3Si Microporous Material}, DOI={10.1007/s11665-024-10618-z},
journal={Journal of Materials Engineering and Performance}, publisher={Springer
Science and Business Media LLC}, author={Pramanik, Sudipta and Mileaege, Dennis
and Andreiev, Anatolii and Hoyer, Kay-Peter and Schaper, Mirko}, year={2025} }'
chicago: Pramanik, Sudipta, Dennis Mileaege, Anatolii Andreiev, Kay-Peter Hoyer,
and Mirko Schaper. “Effect of Compression Rate and Pore Size Distribution on the
Compression Behavior of Additively Manufactured Bio-Inspired Fe3Si Microporous
Material.” Journal of Materials Engineering and Performance, 2025. https://doi.org/10.1007/s11665-024-10618-z.
ieee: 'S. Pramanik, D. Mileaege, A. Andreiev, K.-P. Hoyer, and M. Schaper, “Effect
of Compression Rate and Pore Size Distribution on the Compression Behavior of
Additively Manufactured Bio-inspired Fe3Si Microporous Material,” Journal of
Materials Engineering and Performance, 2025, doi: 10.1007/s11665-024-10618-z.'
mla: Pramanik, Sudipta, et al. “Effect of Compression Rate and Pore Size Distribution
on the Compression Behavior of Additively Manufactured Bio-Inspired Fe3Si Microporous
Material.” Journal of Materials Engineering and Performance, Springer Science
and Business Media LLC, 2025, doi:10.1007/s11665-024-10618-z.
short: S. Pramanik, D. Mileaege, A. Andreiev, K.-P. Hoyer, M. Schaper, Journal of
Materials Engineering and Performance (2025).
date_created: 2025-01-09T16:15:51Z
date_updated: 2025-01-09T16:16:52Z
department:
- _id: '9'
- _id: '158'
doi: 10.1007/s11665-024-10618-z
language:
- iso: eng
publication: Journal of Materials Engineering and Performance
publication_identifier:
issn:
- 1059-9495
- 1544-1024
publication_status: published
publisher: Springer Science and Business Media LLC
quality_controlled: '1'
status: public
title: Effect of Compression Rate and Pore Size Distribution on the Compression Behavior
of Additively Manufactured Bio-inspired Fe3Si Microporous Material
type: journal_article
user_id: '48411'
year: '2025'
...
---
_id: '58076'
abstract:
- lang: eng
text: This paper presents the concept of Information Circularity Assistance, which
provides decision support in the early stages of product creation for Circular
Economy. Engineers in strategic product planning need to proactively predict the
quantity, quality, and timing of secondary materials and returned components.
For example, products with high recycled content will only be economically sustainable
if the material is actually available in the future product life. Our assumption
is that Information Circularity Assistance enables decision makers to incorporate
insights from extreme data – high-volume, high-velocity, heterogeneous and distributed
data from the product life – into product creation through intelligent Digital
Twins. Artificial Intelligence can help to derive sustainable actions in favor
of circular products by processing extreme data and enriching it with expert knowledge.
The research contributes in three key dimensions. First, a comprehensive literature
review is conducted. This review covers concepts of intelligence in Scenario-Technique
for strategic product planning, Digital Twin-based analysis of extreme data and
relevant technologies from Data Science and Artificial Intelligence. In all areas,
the state of the art and emerging trends are identified. Secondly, the study identifies
information needs along the steps of the Scenario-Technique and information offerings
based on Digital Twins. The concept of Information Circularity Assistance results
from the coupling of these demands and offerings, extending the Scenario-Technique
beyond traditional expert-based methods. Third, we extend existing Digital Twin
methods used in circularity and discuss the deployment of Data Science and Artificial
Intelligence algorithms within the product creation process. Our approach uses
extreme data to provide a strategic advantage in optimizing product life cycle
planning, which is illustrated by two sample applications. The aim is to provide
Information Circularity Assistance that will support experienced product planners,
developers, and decision makers in the future.
alternative_title:
- Utilizing Artificial Intelligence, Scenario-Technique and Digital Twins to solve
challenges of product creation for Circular Economy
article_type: original
author:
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: Michael
full_name: Weyrich, Michael
last_name: Weyrich
- first_name: Jens
full_name: Pottebaum, Jens
id: '405'
last_name: Pottebaum
orcid: http://orcid.org/0000-0001-8778-2989
- first_name: Simon
full_name: Kamm, Simon
last_name: Kamm
citation:
ama: Gräßler I, Weyrich M, Pottebaum J, Kamm S. Information Circularity Assistance
based on extreme data. at - Automatisierungstechnik. 2025;73(1):3-21. doi:10.1515/auto-2024-0039
apa: Gräßler, I., Weyrich, M., Pottebaum, J., & Kamm, S. (2025). Information
Circularity Assistance based on extreme data. At - Automatisierungstechnik,
73(1), 3–21. https://doi.org/10.1515/auto-2024-0039
bibtex: '@article{Gräßler_Weyrich_Pottebaum_Kamm_2025, title={Information Circularity
Assistance based on extreme data}, volume={73}, DOI={10.1515/auto-2024-0039},
number={1}, journal={at - Automatisierungstechnik}, publisher={Walter de Gruyter
GmbH}, author={Gräßler, Iris and Weyrich, Michael and Pottebaum, Jens and Kamm,
Simon}, year={2025}, pages={3–21} }'
chicago: 'Gräßler, Iris, Michael Weyrich, Jens Pottebaum, and Simon Kamm. “Information
Circularity Assistance Based on Extreme Data.” At - Automatisierungstechnik
73, no. 1 (2025): 3–21. https://doi.org/10.1515/auto-2024-0039.'
ieee: 'I. Gräßler, M. Weyrich, J. Pottebaum, and S. Kamm, “Information Circularity
Assistance based on extreme data,” at - Automatisierungstechnik, vol. 73,
no. 1, pp. 3–21, 2025, doi: 10.1515/auto-2024-0039.'
mla: Gräßler, Iris, et al. “Information Circularity Assistance Based on Extreme
Data.” At - Automatisierungstechnik, vol. 73, no. 1, Walter de Gruyter
GmbH, 2025, pp. 3–21, doi:10.1515/auto-2024-0039.
short: I. Gräßler, M. Weyrich, J. Pottebaum, S. Kamm, At - Automatisierungstechnik
73 (2025) 3–21.
date_created: 2025-01-07T13:30:45Z
date_updated: 2025-02-15T09:41:54Z
department:
- _id: '152'
doi: 10.1515/auto-2024-0039
intvolume: ' 73'
issue: '1'
keyword:
- Scenario-Technique
- Artificial Intelligence
- Digital Twin
- Large Language Models
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
page: 3-21
publication: at - Automatisierungstechnik
publication_identifier:
issn:
- 0178-2312
- 2196-677X
publication_status: published
publisher: Walter de Gruyter GmbH
quality_controlled: '1'
status: public
title: Information Circularity Assistance based on extreme data
type: journal_article
user_id: '405'
volume: 73
year: '2025'
...
---
_id: '58650'
abstract:
- lang: eng
text: 'Technical systems are characterized by increasing interdisciplinarity, complexity
and networking. A product and its corresponding production systems require interdisciplinary
multi-objective optimization. Sustainability and recyclability demands increase
said complexity. The efficiency of previously established engineering methods
is reaching its limits, which can only be overcome by systematic integration of
extreme data. The aim of "hybrid decision support" is as follows: Data science
and artificial intelligence should be used to supplement human capabilities in
conjunction with existing heuristics, methods, modeling and simulation to increase
the efficiency of product creation.'
alternative_title:
- Hybride Entscheidungsunterstützung in der Produktentstehung - Mit Data Science und
Künstlicher Intelligenz die Leistungsfähigkeit erhöhen
article_type: original
author:
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: Jens
full_name: Pottebaum, Jens
id: '405'
last_name: Pottebaum
orcid: http://orcid.org/0000-0001-8778-2989
- first_name: Peter
full_name: Nyhuis, Peter
last_name: Nyhuis
- first_name: Rainer
full_name: Stark, Rainer
last_name: Stark
- first_name: Klaus-Dieter
full_name: Thoben, Klaus-Dieter
last_name: Thoben
- first_name: Petra
full_name: Wiederkehr, Petra
last_name: Wiederkehr
citation:
ama: Gräßler I, Pottebaum J, Nyhuis P, Stark R, Thoben K-D, Wiederkehr P. Hybrid
Decision Support in Product Creation - Improving performance with data science
and artificial intelligence. Industry 40 Science. 2025;2025(1). doi:10.30844/i4sd.25.1.18
apa: Gräßler, I., Pottebaum, J., Nyhuis, P., Stark, R., Thoben, K.-D., & Wiederkehr,
P. (2025). Hybrid Decision Support in Product Creation - Improving performance
with data science and artificial intelligence. Industry 4.0 Science, 2025(1).
https://doi.org/10.30844/i4sd.25.1.18
bibtex: '@article{Gräßler_Pottebaum_Nyhuis_Stark_Thoben_Wiederkehr_2025, title={Hybrid
Decision Support in Product Creation - Improving performance with data science
and artificial intelligence}, volume={2025}, DOI={10.30844/i4sd.25.1.18},
number={1}, journal={Industry 4.0 Science}, publisher={GITO mbH Verlag}, author={Gräßler,
Iris and Pottebaum, Jens and Nyhuis, Peter and Stark, Rainer and Thoben, Klaus-Dieter
and Wiederkehr, Petra}, year={2025} }'
chicago: Gräßler, Iris, Jens Pottebaum, Peter Nyhuis, Rainer Stark, Klaus-Dieter
Thoben, and Petra Wiederkehr. “Hybrid Decision Support in Product Creation - Improving
Performance with Data Science and Artificial Intelligence.” Industry 4.0 Science
2025, no. 1 (2025). https://doi.org/10.30844/i4sd.25.1.18.
ieee: 'I. Gräßler, J. Pottebaum, P. Nyhuis, R. Stark, K.-D. Thoben, and P. Wiederkehr,
“Hybrid Decision Support in Product Creation - Improving performance with data
science and artificial intelligence,” Industry 4.0 Science, vol. 2025,
no. 1, 2025, doi: 10.30844/i4sd.25.1.18.'
mla: Gräßler, Iris, et al. “Hybrid Decision Support in Product Creation - Improving
Performance with Data Science and Artificial Intelligence.” Industry 4.0 Science,
vol. 2025, no. 1, GITO mbH Verlag, 2025, doi:10.30844/i4sd.25.1.18.
short: I. Gräßler, J. Pottebaum, P. Nyhuis, R. Stark, K.-D. Thoben, P. Wiederkehr,
Industry 4.0 Science 2025 (2025).
date_created: 2025-02-15T09:31:30Z
date_updated: 2025-02-15T09:40:52Z
department:
- _id: '152'
doi: 10.30844/i4sd.25.1.18
intvolume: ' 2025'
issue: '1'
keyword:
- AI
- artificial intelligence
- Data Science
- decision support
- extreme data
- Künstliche Intelligenz
- product creation
- product development
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
publication: Industry 4.0 Science
publication_identifier:
issn:
- 2942-6170
publication_status: published
publisher: GITO mbH Verlag
quality_controlled: '1'
status: public
title: Hybrid Decision Support in Product Creation - Improving performance with data
science and artificial intelligence
type: journal_article
user_id: '405'
volume: 2025
year: '2025'
...
---
_id: '58672'
article_number: '103960'
author:
- first_name: Mohamad
full_name: Al Trjman, Mohamad
id: '65415'
last_name: Al Trjman
- first_name: Alexander Heinrich Johannes
full_name: Salten, Alexander Heinrich Johannes
id: '59551'
last_name: Salten
orcid: 0000-0003-3069-9601
- first_name: Felix
full_name: Beule, Felix
id: '66192'
last_name: Beule
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Julia
full_name: Riese, Julia
id: '101499'
last_name: Riese
orcid: 0000-0002-3053-0534
- first_name: Eugeny
full_name: Kenig, Eugeny
id: '665'
last_name: Kenig
citation:
ama: Al Trjman M, Salten AHJ, Beule F, et al. Viscous fingering in adhesive bonding.
International Journal of Adhesion and Adhesives. 2025;139. doi:10.1016/j.ijadhadh.2025.103960
apa: Al Trjman, M., Salten, A. H. J., Beule, F., Teutenberg, D., Meschut, G., Riese,
J., & Kenig, E. (2025). Viscous fingering in adhesive bonding. International
Journal of Adhesion and Adhesives, 139, Article 103960. https://doi.org/10.1016/j.ijadhadh.2025.103960
bibtex: '@article{Al Trjman_Salten_Beule_Teutenberg_Meschut_Riese_Kenig_2025, title={Viscous
fingering in adhesive bonding}, volume={139}, DOI={10.1016/j.ijadhadh.2025.103960},
number={103960}, journal={International Journal of Adhesion and Adhesives}, publisher={Elsevier
BV}, author={Al Trjman, Mohamad and Salten, Alexander Heinrich Johannes and Beule,
Felix and Teutenberg, Dominik and Meschut, Gerson and Riese, Julia and Kenig,
Eugeny}, year={2025} }'
chicago: Al Trjman, Mohamad, Alexander Heinrich Johannes Salten, Felix Beule, Dominik
Teutenberg, Gerson Meschut, Julia Riese, and Eugeny Kenig. “Viscous Fingering
in Adhesive Bonding.” International Journal of Adhesion and Adhesives 139
(2025). https://doi.org/10.1016/j.ijadhadh.2025.103960.
ieee: 'M. Al Trjman et al., “Viscous fingering in adhesive bonding,” International
Journal of Adhesion and Adhesives, vol. 139, Art. no. 103960, 2025, doi: 10.1016/j.ijadhadh.2025.103960.'
mla: Al Trjman, Mohamad, et al. “Viscous Fingering in Adhesive Bonding.” International
Journal of Adhesion and Adhesives, vol. 139, 103960, Elsevier BV, 2025, doi:10.1016/j.ijadhadh.2025.103960.
short: M. Al Trjman, A.H.J. Salten, F. Beule, D. Teutenberg, G. Meschut, J. Riese,
E. Kenig, International Journal of Adhesion and Adhesives 139 (2025).
date_created: 2025-02-17T19:39:31Z
date_updated: 2025-02-21T12:10:51Z
department:
- _id: '9'
- _id: '831'
doi: 10.1016/j.ijadhadh.2025.103960
intvolume: ' 139'
language:
- iso: eng
publication: International Journal of Adhesion and Adhesives
publication_identifier:
issn:
- 0143-7496
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Viscous fingering in adhesive bonding
type: journal_article
user_id: '101499'
volume: 139
year: '2025'
...
---
_id: '58759'
article_number: '121317'
author:
- first_name: Christopher
full_name: Dechert, Christopher
last_name: Dechert
- first_name: Eugeny Y.
full_name: Kenig, Eugeny Y.
last_name: Kenig
citation:
ama: 'Dechert C, Kenig EY. Influence of microstructures on liquid spreading on inclined
plates: A CFD based study. Chemical Engineering Science. Published online
2025. doi:10.1016/j.ces.2025.121317'
apa: 'Dechert, C., & Kenig, E. Y. (2025). Influence of microstructures on liquid
spreading on inclined plates: A CFD based study. Chemical Engineering Science,
Article 121317. https://doi.org/10.1016/j.ces.2025.121317'
bibtex: '@article{Dechert_Kenig_2025, title={Influence of microstructures on liquid
spreading on inclined plates: A CFD based study}, DOI={10.1016/j.ces.2025.121317},
number={121317}, journal={Chemical Engineering Science}, publisher={Elsevier BV},
author={Dechert, Christopher and Kenig, Eugeny Y.}, year={2025} }'
chicago: 'Dechert, Christopher, and Eugeny Y. Kenig. “Influence of Microstructures
on Liquid Spreading on Inclined Plates: A CFD Based Study.” Chemical Engineering
Science, 2025. https://doi.org/10.1016/j.ces.2025.121317.'
ieee: 'C. Dechert and E. Y. Kenig, “Influence of microstructures on liquid spreading
on inclined plates: A CFD based study,” Chemical Engineering Science, Art.
no. 121317, 2025, doi: 10.1016/j.ces.2025.121317.'
mla: 'Dechert, Christopher, and Eugeny Y. Kenig. “Influence of Microstructures on
Liquid Spreading on Inclined Plates: A CFD Based Study.” Chemical Engineering
Science, 121317, Elsevier BV, 2025, doi:10.1016/j.ces.2025.121317.'
short: C. Dechert, E.Y. Kenig, Chemical Engineering Science (2025).
date_created: 2025-02-21T12:23:00Z
date_updated: 2025-02-21T12:32:19Z
department:
- _id: '831'
doi: 10.1016/j.ces.2025.121317
extern: '1'
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
project:
- _id: '52'
name: 'PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing'
publication: Chemical Engineering Science
publication_identifier:
issn:
- 0009-2509
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
related_material:
link:
- relation: confirmation
url: https://doi.org/10.1016/j.ces.2025.121317
status: public
title: 'Influence of microstructures on liquid spreading on inclined plates: A CFD
based study'
type: journal_article
user_id: '69828'
year: '2025'
...
---
_id: '58535'
author:
- first_name: Keke
full_name: Yang, Keke
id: '65085'
last_name: Yang
orcid: 0000-0001-9201-9304
- first_name: Zhuoqun
full_name: Wang, Zhuoqun
last_name: Wang
- first_name: Viktor
full_name: Haak, Viktor
id: '60398'
last_name: Haak
- first_name: Viktoria
full_name: Olfert, Viktoria
id: '5974'
last_name: Olfert
- first_name: Bassel
full_name: El-Sari, Bassel
last_name: El-Sari
- first_name: David
full_name: Hein, David
id: '7728'
last_name: Hein
- first_name: Max
full_name: Biegler, Max
last_name: Biegler
- first_name: Michael
full_name: Rethmeier, Michael
last_name: Rethmeier
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: Yang K, Wang Z, Haak V, et al. A novel welding schedule for expanding the expulsion-free
process window in resistance spot welding of dissimilar joints with ultra-high
strength steel. Journal of Manufacturing Processes. 2025;137:306-319. doi:10.1016/j.jmapro.2025.02.009
apa: Yang, K., Wang, Z., Haak, V., Olfert, V., El-Sari, B., Hein, D., Biegler, M.,
Rethmeier, M., & Meschut, G. (2025). A novel welding schedule for expanding
the expulsion-free process window in resistance spot welding of dissimilar joints
with ultra-high strength steel. Journal of Manufacturing Processes, 137,
306–319. https://doi.org/10.1016/j.jmapro.2025.02.009
bibtex: '@article{Yang_Wang_Haak_Olfert_El-Sari_Hein_Biegler_Rethmeier_Meschut_2025,
title={A novel welding schedule for expanding the expulsion-free process window
in resistance spot welding of dissimilar joints with ultra-high strength steel},
volume={137}, DOI={10.1016/j.jmapro.2025.02.009},
journal={Journal of Manufacturing Processes}, publisher={Elsevier BV}, author={Yang,
Keke and Wang, Zhuoqun and Haak, Viktor and Olfert, Viktoria and El-Sari, Bassel
and Hein, David and Biegler, Max and Rethmeier, Michael and Meschut, Gerson},
year={2025}, pages={306–319} }'
chicago: 'Yang, Keke, Zhuoqun Wang, Viktor Haak, Viktoria Olfert, Bassel El-Sari,
David Hein, Max Biegler, Michael Rethmeier, and Gerson Meschut. “A Novel Welding
Schedule for Expanding the Expulsion-Free Process Window in Resistance Spot Welding
of Dissimilar Joints with Ultra-High Strength Steel.” Journal of Manufacturing
Processes 137 (2025): 306–19. https://doi.org/10.1016/j.jmapro.2025.02.009.'
ieee: 'K. Yang et al., “A novel welding schedule for expanding the expulsion-free
process window in resistance spot welding of dissimilar joints with ultra-high
strength steel,” Journal of Manufacturing Processes, vol. 137, pp. 306–319,
2025, doi: 10.1016/j.jmapro.2025.02.009.'
mla: Yang, Keke, et al. “A Novel Welding Schedule for Expanding the Expulsion-Free
Process Window in Resistance Spot Welding of Dissimilar Joints with Ultra-High
Strength Steel.” Journal of Manufacturing Processes, vol. 137, Elsevier
BV, 2025, pp. 306–19, doi:10.1016/j.jmapro.2025.02.009.
short: K. Yang, Z. Wang, V. Haak, V. Olfert, B. El-Sari, D. Hein, M. Biegler, M.
Rethmeier, G. Meschut, Journal of Manufacturing Processes 137 (2025) 306–319.
date_created: 2025-02-07T10:08:08Z
date_updated: 2025-02-24T07:30:23Z
ddc:
- '670'
department:
- _id: '157'
doi: 10.1016/j.jmapro.2025.02.009
file:
- access_level: closed
content_type: application/pdf
creator: kekeyang
date_created: 2025-02-07T10:09:17Z
date_updated: 2025-02-07T10:09:17Z
file_id: '58536'
file_name: KYA_VÖ6.pdf
file_size: 3747516
relation: main_file
success: 1
file_date_updated: 2025-02-07T10:09:17Z
has_accepted_license: '1'
intvolume: ' 137'
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
page: 306-319
publication: Journal of Manufacturing Processes
publication_identifier:
issn:
- 1526-6125
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: A novel welding schedule for expanding the expulsion-free process window in
resistance spot welding of dissimilar joints with ultra-high strength steel
type: journal_article
user_id: '65085'
volume: 137
year: '2025'
...
---
_id: '58806'
abstract:
- lang: eng
text: 'The present paper has two objectives. First, it explicates the story, initially
portrayed by Eckart Förster, that philosophy allegedly started with publishing
of Kant’s CPR and ended a quarter century later when Hegel’s Phenomenology of
Mind appeared. We address the questions in what sense this happened and how is
this development to be interpreted? Secondly, we demonstrate that similar radical
transition from new, “true” beginning of philosophy to its apparent finishing
took place in two other, high profile occasions in the history of Western philosophy,
in two key points of its development: in the years 390-365 bc, between the early
and the late Plato, and between 1898 and 1922, between Russell and Wittgenstein’s
Tractatus. These three short-lived, spectacular transitions from philosophy’s
alleged start to its alleged ultimate accomplishment give us good reason to speak
about a specific 25-years principle in philosophy. In a peculiar way, this principle
reveals philosophy’s true nature.'
article_type: original
author:
- first_name: Nikolay
full_name: Milkov, Nikolay
id: '357'
last_name: Milkov
citation:
ama: 'Milkov N. Philosophy’s 25-Years Principle: Philosophy between Intuitive Understanding
and Discursive Reasoning. Journal of Research in Philosophy and History.
2025;8(1):36-43. doi:10.22158/jrph.v8n1p36'
apa: 'Milkov, N. (2025). Philosophy’s 25-Years Principle: Philosophy between Intuitive
Understanding and Discursive Reasoning. Journal of Research in Philosophy and
History, 8(1), 36–43. https://doi.org/10.22158/jrph.v8n1p36'
bibtex: '@article{Milkov_2025, title={Philosophy’s 25-Years Principle: Philosophy
between Intuitive Understanding and Discursive Reasoning}, volume={8}, DOI={10.22158/jrph.v8n1p36}, number={1},
journal={Journal of Research in Philosophy and History}, publisher={SCHOLINK INC.},
author={Milkov, Nikolay}, year={2025}, pages={36–43} }'
chicago: 'Milkov, Nikolay. “Philosophy’s 25-Years Principle: Philosophy between
Intuitive Understanding and Discursive Reasoning.” Journal of Research in Philosophy
and History 8, no. 1 (2025): 36–43. https://doi.org/10.22158/jrph.v8n1p36.'
ieee: 'N. Milkov, “Philosophy’s 25-Years Principle: Philosophy between Intuitive
Understanding and Discursive Reasoning,” Journal of Research in Philosophy
and History, vol. 8, no. 1, pp. 36–43, 2025, doi: 10.22158/jrph.v8n1p36.'
mla: 'Milkov, Nikolay. “Philosophy’s 25-Years Principle: Philosophy between Intuitive
Understanding and Discursive Reasoning.” Journal of Research in Philosophy
and History, vol. 8, no. 1, SCHOLINK INC., 2025, pp. 36–43, doi:10.22158/jrph.v8n1p36.'
short: N. Milkov, Journal of Research in Philosophy and History 8 (2025) 36–43.
conference:
end_date: 2024-08-08
location: Rome, Italy
name: 25th World Congress of Philosophy
start_date: 2024-08-02
date_created: 2025-02-24T10:24:15Z
date_updated: 2025-02-24T10:24:30Z
department:
- _id: '14'
doi: 10.22158/jrph.v8n1p36
intvolume: ' 8'
issue: '1'
keyword:
- Aristotle
- Hegel
- Kant
- Plato
- Russell
- Wittgenstein
language:
- iso: eng
page: 36-43
publication: Journal of Research in Philosophy and History
publication_identifier:
eissn:
- 2576-2435
issn:
- 2576-2451
publication_status: published
publisher: SCHOLINK INC.
quality_controlled: '1'
status: public
title: 'Philosophy’s 25-Years Principle: Philosophy between Intuitive Understanding
and Discursive Reasoning'
type: journal_article
user_id: '357'
volume: 8
year: '2025'
...
---
_id: '58818'
author:
- first_name: Nikolay
full_name: Milkov, Nikolay
id: '357'
last_name: Milkov
citation:
ama: 'Milkov N. Susan Stebbing and Some Poorly Explored Venues of Analytic Philosophy.
In: Coliva A, Doulas L, eds. Susan Stebbing: Analysis, Common Sense, and Public
Philosophy. 1st ed. Oxford New Histories of Philosophy. Oxford University
Press.'
apa: 'Milkov, N. (n.d.). Susan Stebbing and Some Poorly Explored Venues of Analytic
Philosophy. In A. Coliva & L. Doulas (Eds.), Susan Stebbing: Analysis,
Common Sense, and Public Philosophy (1st ed.). Oxford University Press.'
bibtex: '@inbook{Milkov, place={Oxford}, edition={1}, series={Oxford New Histories
of Philosophy}, title={Susan Stebbing and Some Poorly Explored Venues of Analytic
Philosophy}, booktitle={Susan Stebbing: Analysis, Common Sense, and Public Philosophy},
publisher={Oxford University Press}, author={Milkov, Nikolay}, editor={Coliva,
Annalisa and Doulas, Luis}, collection={Oxford New Histories of Philosophy} }'
chicago: 'Milkov, Nikolay. “Susan Stebbing and Some Poorly Explored Venues of Analytic
Philosophy.” In Susan Stebbing: Analysis, Common Sense, and Public Philosophy,
edited by Annalisa Coliva and Luis Doulas, 1st ed. Oxford New Histories of Philosophy.
Oxford: Oxford University Press, n.d.'
ieee: 'N. Milkov, “Susan Stebbing and Some Poorly Explored Venues of Analytic Philosophy,”
in Susan Stebbing: Analysis, Common Sense, and Public Philosophy, 1st ed.,
A. Coliva and L. Doulas, Eds. Oxford: Oxford University Press.'
mla: 'Milkov, Nikolay. “Susan Stebbing and Some Poorly Explored Venues of Analytic
Philosophy.” Susan Stebbing: Analysis, Common Sense, and Public Philosophy,
edited by Annalisa Coliva and Luis Doulas, 1st ed., Oxford University Press.'
short: 'N. Milkov, in: A. Coliva, L. Doulas (Eds.), Susan Stebbing: Analysis, Common
Sense, and Public Philosophy, 1st ed., Oxford University Press, Oxford, n.d.'
date_created: 2025-02-24T12:51:04Z
date_updated: 2025-02-24T12:51:16Z
department:
- _id: '14'
edition: '1'
editor:
- first_name: Annalisa
full_name: Coliva, Annalisa
last_name: Coliva
- first_name: Luis
full_name: Doulas, Luis
last_name: Doulas
language:
- iso: eng
place: Oxford
publication: 'Susan Stebbing: Analysis, Common Sense, and Public Philosophy'
publication_status: inpress
publisher: Oxford University Press
quality_controlled: '1'
series_title: Oxford New Histories of Philosophy
status: public
title: Susan Stebbing and Some Poorly Explored Venues of Analytic Philosophy
type: book_chapter
user_id: '357'
year: '2025'
...
---
_id: '58822'
abstract:
- lang: eng
text: 'In 1921, John Wisdom (1904–1993) became a member of Fitzwilliam House, Cambridge,
where he read philosophy and attended lectures by G. E. Moore, C. D. Broad, and
J. E. McTaggart. He received his BA in 1924, after which he worked for five years
at the National Institute of Industrial Psychology. From 1929 to 1934, Wisdom
was a Lecturer in the department of logic and metaphysics at the University of
St Andrews and a colleague of G. F. Stout. After the publication of his book Interpretation
and Analysis (1931) and five articles on “Logical Constructions” in Mind (1931–3),
Wisdom became a Lecturer in Moral Sciences in Cambridge and a Fellow of Trinity
College. This gave him the opportunity to gain first-hand knowledge of Wittgenstein’s
philosophy. Since nothing by Wittgenstein but Tractatus appeared in print for
decades, Wisdom’s publications of these years were—mistakenly—read as portents
of the new ideas of Wittgenstein himself. The publication of Wittgenstein’s Philosophical
Investigations in 1953 brought with it, among other things, the fall of Wisdom’s
popularity. '
author:
- first_name: Nikolay
full_name: Milkov, Nikolay
id: '357'
last_name: Milkov
citation:
ama: 'Milkov N. Wisdom’s Wittgenstein. In: Khani AH, Kemp G, eds. Wittgenstein
and Other Philosophers: His Influence on Historical and Contemporary Analytic
Philosophers, 2 Vol., Volume II. 1st ed. Routledge.'
apa: 'Milkov, N. (n.d.). Wisdom’s Wittgenstein. In A. H. Khani & G. Kemp (Eds.),
Wittgenstein and Other Philosophers: His Influence on Historical and Contemporary
Analytic Philosophers, 2 vol., Volume II (1st ed.). Routledge.'
bibtex: '@inbook{Milkov, place={London}, edition={1}, title={Wisdom’s Wittgenstein},
booktitle={Wittgenstein and Other Philosophers: His Influence on Historical and
Contemporary Analytic Philosophers, 2 vol., Volume II}, publisher={Routledge},
author={Milkov, Nikolay}, editor={Khani , Ali Hossein and Kemp , Gary } }'
chicago: 'Milkov, Nikolay. “Wisdom’s Wittgenstein.” In Wittgenstein and Other
Philosophers: His Influence on Historical and Contemporary Analytic Philosophers,
2 Vol., Volume II, edited by Ali Hossein Khani and Gary Kemp , 1st ed.
London: Routledge, n.d.'
ieee: 'N. Milkov, “Wisdom’s Wittgenstein,” in Wittgenstein and Other Philosophers:
His Influence on Historical and Contemporary Analytic Philosophers, 2 vol., Volume
II, 1st ed., A. H. Khani and G. Kemp , Eds. London: Routledge.'
mla: 'Milkov, Nikolay. “Wisdom’s Wittgenstein.” Wittgenstein and Other Philosophers:
His Influence on Historical and Contemporary Analytic Philosophers, 2 Vol., Volume
II, edited by Ali Hossein Khani and Gary Kemp , 1st ed., Routledge.'
short: 'N. Milkov, in: A.H. Khani , G. Kemp (Eds.), Wittgenstein and Other Philosophers:
His Influence on Historical and Contemporary Analytic Philosophers, 2 Vol., Volume
II, 1st ed., Routledge, London, n.d.'
date_created: 2025-02-24T18:33:50Z
date_updated: 2025-02-24T18:38:38Z
department:
- _id: '14'
edition: '1'
editor:
- first_name: 'Ali Hossein '
full_name: 'Khani , Ali Hossein '
last_name: 'Khani '
- first_name: 'Gary '
full_name: 'Kemp , Gary '
last_name: 'Kemp '
keyword:
- elucidation
- facts
- Frege
- language
- metaphysics
- G. E. Moore
- Russell
- Stebbing
- John Wisdom
- Wittgenstein
language:
- iso: eng
place: London
publication: 'Wittgenstein and Other Philosophers: His Influence on Historical and
Contemporary Analytic Philosophers, 2 vol., Volume II'
publication_status: inpress
publisher: Routledge
quality_controlled: '1'
status: public
title: Wisdom's Wittgenstein
type: book_chapter
user_id: '357'
year: '2025'
...
---
_id: '58821'
abstract:
- lang: eng
text: Susan Stebbing wrote only once on Wittgenstein, in her paper ‘Logical Positivism
and Analysis’ (1933). The paper was unusually critical of Wittgenstein. It put
the Cambridge analytic philosophy of Moore and Russell in a sharp opposition to
the positivist philosophy of the Vienna Circle, in which Stebbing included Wittgenstein.
Whereas the positivists were interested in analysing language, the Cambridge realists
were analysing facts. To be more explicit, the analytic philosophers were engaged
in directional analysis, which seeks to illuminate (to elucidate) the multiplicity
of the analysed facts. In contrast, positivists aimed at a final analysis that
proves that there are simples. Stebbing’s sympathies were clearly on the side
of the Cambridge realists. The important implication of Stebbing’s paper was that
it urged Wittgenstein to change the style of his philosophy, abandoning those
points which allegedly connected him with the Vienna Circle.
author:
- first_name: Nikolay
full_name: Milkov, Nikolay
id: '357'
last_name: Milkov
citation:
ama: 'Milkov N. Stebbing’s Wittgenstein. In: Khani AH, Kemp G, eds. Wittgenstein
and Other Philosophers: His Influence on Historical and Contemporary Analytic
Philosophers, Vol. II. 1st ed. Routledge.'
apa: 'Milkov, N. (n.d.). Stebbing’s Wittgenstein. In A. H. Khani & G. Kemp (Eds.),
Wittgenstein and Other Philosophers: His Influence on Historical and Contemporary
Analytic Philosophers, vol. II (1st ed.). Routledge.'
bibtex: '@inbook{Milkov, place={London}, edition={1}, title={Stebbing’s Wittgenstein},
booktitle={Wittgenstein and Other Philosophers: His Influence on Historical and
Contemporary Analytic Philosophers, vol. II}, publisher={Routledge}, author={Milkov,
Nikolay}, editor={Khani , Ali Hossein and Kemp , Gary } }'
chicago: 'Milkov, Nikolay. “Stebbing’s Wittgenstein.” In Wittgenstein and Other
Philosophers: His Influence on Historical and Contemporary Analytic Philosophers,
Vol. II, edited by Ali Hossein Khani and Gary Kemp , 1st ed. London: Routledge,
n.d.'
ieee: 'N. Milkov, “Stebbing’s Wittgenstein,” in Wittgenstein and Other Philosophers:
His Influence on Historical and Contemporary Analytic Philosophers, vol. II,
1st ed., A. H. Khani and G. Kemp , Eds. London: Routledge.'
mla: 'Milkov, Nikolay. “Stebbing’s Wittgenstein.” Wittgenstein and Other Philosophers:
His Influence on Historical and Contemporary Analytic Philosophers, Vol. II,
edited by Ali Hossein Khani and Gary Kemp , 1st ed., Routledge.'
short: 'N. Milkov, in: A.H. Khani , G. Kemp (Eds.), Wittgenstein and Other Philosophers:
His Influence on Historical and Contemporary Analytic Philosophers, Vol. II, 1st
ed., Routledge, London, n.d.'
date_created: 2025-02-24T18:29:59Z
date_updated: 2025-02-24T18:30:06Z
ddc:
- '100'
department:
- _id: '14'
edition: '1'
editor:
- first_name: 'Ali Hossein '
full_name: 'Khani , Ali Hossein '
last_name: 'Khani '
- first_name: 'Gary '
full_name: 'Kemp , Gary '
last_name: 'Kemp '
keyword:
- directional analysis
- elucidation
- facts
- metaphysics
- G. E. Moore
- Russell
- Stebbing
- John Wisdom
- Wittgenstein
language:
- iso: eng
place: London
publication: 'Wittgenstein and Other Philosophers: His Influence on Historical and
Contemporary Analytic Philosophers, vol. II'
publication_status: inpress
publisher: Routledge
quality_controlled: '1'
status: public
title: Stebbing's Wittgenstein
type: book_chapter
user_id: '357'
year: '2025'
...
---
_id: '58556'
abstract:
- lang: eng
text: 'To predict and prevent uneven tire wear in addition to a reduction of overall
tire wear, it is essential to estimate not only the total amount of wear but also
how the wear is distributed across the tire width. This requires knowledge of
the frictional power distribution in the tire contact patch, which is the basis
for calculating tire wear using a wear law. Usually, only 3D structural tire models
can generate such distributed contact results. However, they involve high computational
costs and cannot be used for comprehensive optimization of a vehicle’s suspension
system with respect to tire wear characteristics. Hence, this contribution presents
a methodology on how to accelerate the prediction of the frictional power distribution
using two components: The structural tire model is replaced by an empirical tire
model that on its own is not able to generate distributed contact results. Therefore,
an artificial neural network is trained to predict the desired contact results
from the kinematic quantities calculated by the empirical tire model. In the initial
training phase, both components are fitted to data generated by the original complex
tire model. After training, the empirical tire model can replace the structural
tire model in vehicle simulations, resulting in significantly shorter calculation
times. The simulation results are fed into the artificial neural network, which
predicts the frictional power distributions over the tire width with negligible
additional effort. Overall, the methodology reduces calculation time for the prediction
of tire wear based on virtual test drives to approximately 25% of the time needed
when using structural tire models.'
article_type: original
author:
- first_name: Lars
full_name: Muth, Lars
id: '77313'
last_name: Muth
orcid: 0000-0002-2938-5616
- first_name: Raphael
full_name: Zharia, Raphael
last_name: Zharia
- first_name: Hürkan
full_name: Sahin, Hürkan
last_name: Sahin
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
citation:
ama: Muth L, Zharia R, Sahin H, Sextro W. Prediction of the Frictional Power Distribution
in the Tire Contact Patch Based on an Empirical Tire Model and an Artificial Neural
Network. Tire Science and Technology. Published online 2025. doi:https://doi.org/10.2346/TST-24-009
apa: Muth, L., Zharia, R., Sahin, H., & Sextro, W. (2025). Prediction of the
Frictional Power Distribution in the Tire Contact Patch Based on an Empirical
Tire Model and an Artificial Neural Network. Tire Science and Technology.
https://doi.org/10.2346/TST-24-009
bibtex: '@article{Muth_Zharia_Sahin_Sextro_2025, title={Prediction of the Frictional
Power Distribution in the Tire Contact Patch Based on an Empirical Tire Model
and an Artificial Neural Network}, DOI={https://doi.org/10.2346/TST-24-009},
journal={Tire Science and Technology}, publisher={The Tire Society}, author={Muth,
Lars and Zharia, Raphael and Sahin, Hürkan and Sextro, Walter}, year={2025} }'
chicago: Muth, Lars, Raphael Zharia, Hürkan Sahin, and Walter Sextro. “Prediction
of the Frictional Power Distribution in the Tire Contact Patch Based on an Empirical
Tire Model and an Artificial Neural Network.” Tire Science and Technology,
2025. https://doi.org/10.2346/TST-24-009.
ieee: 'L. Muth, R. Zharia, H. Sahin, and W. Sextro, “Prediction of the Frictional
Power Distribution in the Tire Contact Patch Based on an Empirical Tire Model
and an Artificial Neural Network,” Tire Science and Technology, 2025, doi:
https://doi.org/10.2346/TST-24-009.'
mla: Muth, Lars, et al. “Prediction of the Frictional Power Distribution in the
Tire Contact Patch Based on an Empirical Tire Model and an Artificial Neural Network.”
Tire Science and Technology, The Tire Society, 2025, doi:https://doi.org/10.2346/TST-24-009.
short: L. Muth, R. Zharia, H. Sahin, W. Sextro, Tire Science and Technology (2025).
date_created: 2025-02-10T19:54:28Z
date_updated: 2025-02-27T19:53:09Z
department:
- _id: '151'
- _id: '9'
doi: https://doi.org/10.2346/TST-24-009
extern: '1'
language:
- iso: eng
publication: Tire Science and Technology
publication_status: epub_ahead
publisher: The Tire Society
quality_controlled: '1'
status: public
title: Prediction of the Frictional Power Distribution in the Tire Contact Patch Based
on an Empirical Tire Model and an Artificial Neural Network
type: journal_article
user_id: '77313'
year: '2025'
...
---
_id: '58165'
article_number: '131436'
author:
- first_name: Maximilian
full_name: Neumann, Maximilian
last_name: Neumann
- first_name: Marc
full_name: Xia, Marc
last_name: Xia
- first_name: René
full_name: Pöschmann, René
last_name: Pöschmann
- first_name: Amelie
full_name: Merkel, Amelie
last_name: Merkel
- first_name: Rolf
full_name: Staud, Rolf
last_name: Staud
- first_name: Hannes
full_name: Schneider, Hannes
last_name: Schneider
- first_name: Thomas
full_name: Ehlert, Thomas
id: '47151'
last_name: Ehlert
- first_name: Jürgen
full_name: Paschold, Jürgen
last_name: Paschold
- first_name: Steffen
full_name: Müller, Steffen
last_name: Müller
- first_name: Laura-Selin
full_name: Harding, Laura-Selin
last_name: Harding
- first_name: Johannes
full_name: Neukäufer, Johannes
last_name: Neukäufer
- first_name: Christoph
full_name: Hiller, Christoph
last_name: Hiller
- first_name: Ilja
full_name: Ausner, Ilja
last_name: Ausner
- first_name: Ansor
full_name: Gäbler, Ansor
last_name: Gäbler
- first_name: Reiner
full_name: Chromik, Reiner
last_name: Chromik
- first_name: Jan
full_name: Maćkowiak, Jan
last_name: Maćkowiak
- first_name: Jerzy
full_name: Maćkowiak, Jerzy
last_name: Maćkowiak
- first_name: Jose Luis
full_name: Sola Cervera, Jose Luis
last_name: Sola Cervera
- first_name: Christian
full_name: Geipel, Christian
last_name: Geipel
- first_name: Jost
full_name: Brinkmann, Jost
last_name: Brinkmann
- first_name: Jürgen
full_name: Bausa, Jürgen
last_name: Bausa
- first_name: Sebastian
full_name: Zeck, Sebastian
last_name: Zeck
- first_name: Mark
full_name: Hapke, Mark
last_name: Hapke
- first_name: Florian
full_name: Forner, Florian
last_name: Forner
- first_name: Florian
full_name: Habla, Florian
last_name: Habla
- first_name: Manuel
full_name: Knaup, Manuel
last_name: Knaup
- first_name: Robin
full_name: Schulz, Robin
last_name: Schulz
- first_name: Michael
full_name: Schultes, Michael
last_name: Schultes
- first_name: Thomas
full_name: Harlacher, Thomas
last_name: Harlacher
- first_name: Nicole
full_name: Lutters, Nicole
id: '22006'
last_name: Lutters
orcid: 0009-0006-7828-8448
- first_name: Eugeny
full_name: Kenig, Eugeny
id: '665'
last_name: Kenig
- first_name: Katharina
full_name: Jasch, Katharina
last_name: Jasch
- first_name: Mandy
full_name: Paschetag, Mandy
last_name: Paschetag
- first_name: Stephan
full_name: Scholl, Stephan
last_name: Scholl
- first_name: Marcus
full_name: Grünewald, Marcus
last_name: Grünewald
- first_name: Georg
full_name: Brösigke, Georg
last_name: Brösigke
- first_name: Jens-Uwe
full_name: Repke, Jens-Uwe
last_name: Repke
- first_name: Harald
full_name: Klein, Harald
last_name: Klein
- first_name: Sebastian
full_name: Rehfeldt, Sebastian
last_name: Rehfeldt
citation:
ama: 'Neumann M, Xia M, Pöschmann R, et al. Towards reliable HETP values: Lessons
learned from standardized separation efficiency measurements. Separation and
Purification Technology. 2025;361. doi:10.1016/j.seppur.2025.131436'
apa: 'Neumann, M., Xia, M., Pöschmann, R., Merkel, A., Staud, R., Schneider, H.,
Ehlert, T., Paschold, J., Müller, S., Harding, L.-S., Neukäufer, J., Hiller, C.,
Ausner, I., Gäbler, A., Chromik, R., Maćkowiak, J., Maćkowiak, J., Sola Cervera,
J. L., Geipel, C., … Rehfeldt, S. (2025). Towards reliable HETP values: Lessons
learned from standardized separation efficiency measurements. Separation and
Purification Technology, 361, Article 131436. https://doi.org/10.1016/j.seppur.2025.131436'
bibtex: '@article{Neumann_Xia_Pöschmann_Merkel_Staud_Schneider_Ehlert_Paschold_Müller_Harding_et
al._2025, title={Towards reliable HETP values: Lessons learned from standardized
separation efficiency measurements}, volume={361}, DOI={10.1016/j.seppur.2025.131436},
number={131436}, journal={Separation and Purification Technology}, publisher={Elsevier
BV}, author={Neumann, Maximilian and Xia, Marc and Pöschmann, René and Merkel,
Amelie and Staud, Rolf and Schneider, Hannes and Ehlert, Thomas and Paschold,
Jürgen and Müller, Steffen and Harding, Laura-Selin and et al.}, year={2025} }'
chicago: 'Neumann, Maximilian, Marc Xia, René Pöschmann, Amelie Merkel, Rolf Staud,
Hannes Schneider, Thomas Ehlert, et al. “Towards Reliable HETP Values: Lessons
Learned from Standardized Separation Efficiency Measurements.” Separation and
Purification Technology 361 (2025). https://doi.org/10.1016/j.seppur.2025.131436.'
ieee: 'M. Neumann et al., “Towards reliable HETP values: Lessons learned
from standardized separation efficiency measurements,” Separation and Purification
Technology, vol. 361, Art. no. 131436, 2025, doi: 10.1016/j.seppur.2025.131436.'
mla: 'Neumann, Maximilian, et al. “Towards Reliable HETP Values: Lessons Learned
from Standardized Separation Efficiency Measurements.” Separation and Purification
Technology, vol. 361, 131436, Elsevier BV, 2025, doi:10.1016/j.seppur.2025.131436.'
short: M. Neumann, M. Xia, R. Pöschmann, A. Merkel, R. Staud, H. Schneider, T. Ehlert,
J. Paschold, S. Müller, L.-S. Harding, J. Neukäufer, C. Hiller, I. Ausner, A.
Gäbler, R. Chromik, J. Maćkowiak, J. Maćkowiak, J.L. Sola Cervera, C. Geipel,
J. Brinkmann, J. Bausa, S. Zeck, M. Hapke, F. Forner, F. Habla, M. Knaup, R. Schulz,
M. Schultes, T. Harlacher, N. Lutters, E. Kenig, K. Jasch, M. Paschetag, S. Scholl,
M. Grünewald, G. Brösigke, J.-U. Repke, H. Klein, S. Rehfeldt, Separation and
Purification Technology 361 (2025).
date_created: 2025-01-13T11:35:51Z
date_updated: 2025-02-28T07:57:11Z
department:
- _id: '9'
- _id: '145'
- _id: '831'
doi: 10.1016/j.seppur.2025.131436
intvolume: ' 361'
language:
- iso: eng
publication: Separation and Purification Technology
publication_identifier:
issn:
- 1383-5866
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: 'Towards reliable HETP values: Lessons learned from standardized separation
efficiency measurements'
type: journal_article
user_id: '22006'
volume: 361
year: '2025'
...
---
_id: '58935'
abstract:
- lang: ger
text: In diesem Beitrag wird ein zwei Sitzungen umfassendes, flexibel integrierbares
Lehrmodul zur Stärkung der Demokratiebildungskompetenz von Lehramtsstudierenden
evaluiert. Dazu werden 101 schriftliche Reflexionen von Studierenden aus drei
bildungswissenschaftlichen Hochschulseminaren aus dem Wintersemester 2022/2023
und dem Sommersemester 2023 anhand der Text-Sortier-Technik ausgewertet. Die Evaluationsergebnisse
verdeutlichen die studentischen Lernaktivitäten in den Kompetenzbereichen Werte,
Einstellungen und Fähigkeiten für eine demokratische Kultur. Zudem wurden die
Kenntnisse der Studierenden zur methodischen Gestaltung von demokratischen Aushandlungsprozessen
im Unterrichts- und Schulkontext erweitert. Demnach konnte die Wirksamkeit des
Lernmoduls auf der Prozess- und Ergebnisdimension hochschulischen Lernens plausibilisiert
werden.
article_type: original
author:
- first_name: Janis
full_name: Wehde, Janis
id: '82257'
last_name: Wehde
orcid: 0009-0008-0720-7828
citation:
ama: Wehde J. Evaluation eines Lehrmoduls zur Stärkung der Demokratiebildungskompetenz
von Lehramtsstudierenden. die hochschullehre. 2025;11(15):184-201. doi:10.3278/HSL2457W
apa: Wehde, J. (2025). Evaluation eines Lehrmoduls zur Stärkung der Demokratiebildungskompetenz
von Lehramtsstudierenden. die hochschullehre, 11(15), 184–201. https://doi.org/10.3278/HSL2457W
bibtex: '@article{Wehde_2025, title={Evaluation eines Lehrmoduls zur Stärkung der
Demokratiebildungskompetenz von Lehramtsstudierenden}, volume={11}, DOI={10.3278/HSL2457W},
number={15}, journal={die hochschullehre}, publisher={wbv}, author={Wehde, Janis},
year={2025}, pages={184–201} }'
chicago: 'Wehde, Janis. “Evaluation eines Lehrmoduls zur Stärkung der Demokratiebildungskompetenz
von Lehramtsstudierenden.” die hochschullehre 11, no. 15 (2025): 184–201.
https://doi.org/10.3278/HSL2457W.'
ieee: 'J. Wehde, “Evaluation eines Lehrmoduls zur Stärkung der Demokratiebildungskompetenz
von Lehramtsstudierenden,” die hochschullehre, vol. 11, no. 15, pp. 184–201,
2025, doi: 10.3278/HSL2457W.'
mla: Wehde, Janis. “Evaluation eines Lehrmoduls zur Stärkung der Demokratiebildungskompetenz
von Lehramtsstudierenden.” die hochschullehre, vol. 11, no. 15, wbv, 2025,
pp. 184–201, doi:10.3278/HSL2457W.
short: J. Wehde, die hochschullehre 11 (2025) 184–201.
date_created: 2025-03-07T14:33:28Z
date_updated: 2025-03-07T14:46:04Z
ddc:
- '370'
department:
- _id: '4'
doi: 10.3278/HSL2457W
intvolume: ' 11'
issue: '15'
language:
- iso: ger
main_file_link:
- open_access: '1'
url: https://www.wbv.de/shop/Evaluation-eines-Lehrmoduls-zur-Staerkung-der-Demokratiebildungskompetenz-von-Lehramtsstudierenden-HSL2457W
oa: '1'
page: 184-201
project:
- _id: '1042'
name: 'DemoKult: DemoKult – Die unterrichtsbezogene Förderung von Kompetenzen für
eine demokratische Kultur'
publication: die hochschullehre
publication_status: published
publisher: wbv
quality_controlled: '1'
status: public
title: Evaluation eines Lehrmoduls zur Stärkung der Demokratiebildungskompetenz von
Lehramtsstudierenden
type: journal_article
user_id: '82257'
volume: 11
year: '2025'
...
---
_id: '58950'
author:
- first_name: Marcel Patrick Klaus
full_name: Braun, Marcel Patrick Klaus
id: '84156'
last_name: Braun
- first_name: Olexandr
full_name: Grydin, Olexandr
last_name: Grydin
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: 'Braun MPK, Grydin O, Hoyer K-P, Schaper M. Precipitation Hardening in the
Magnesium–Zinc–Calcium Alloy System. In: The Minerals, Metals & Materials
Series. Springer Nature Switzerland; 2025. doi:10.1007/978-3-031-81061-9_12'
apa: Braun, M. P. K., Grydin, O., Hoyer, K.-P., & Schaper, M. (2025). Precipitation
Hardening in the Magnesium–Zinc–Calcium Alloy System. In The Minerals, Metals
& Materials Series. TMS 2025. The Minerals, Metals & Materials,
LAs Vegas, USA. Springer Nature Switzerland. https://doi.org/10.1007/978-3-031-81061-9_12
bibtex: '@inbook{Braun_Grydin_Hoyer_Schaper_2025, place={Cham}, title={Precipitation
Hardening in the Magnesium–Zinc–Calcium Alloy System}, DOI={10.1007/978-3-031-81061-9_12},
booktitle={The Minerals, Metals & Materials Series}, publisher={Springer
Nature Switzerland}, author={Braun, Marcel Patrick Klaus and Grydin, Olexandr
and Hoyer, Kay-Peter and Schaper, Mirko}, year={2025} }'
chicago: 'Braun, Marcel Patrick Klaus, Olexandr Grydin, Kay-Peter Hoyer, and Mirko
Schaper. “Precipitation Hardening in the Magnesium–Zinc–Calcium Alloy System.”
In The Minerals, Metals & Materials Series. Cham: Springer Nature
Switzerland, 2025. https://doi.org/10.1007/978-3-031-81061-9_12.'
ieee: 'M. P. K. Braun, O. Grydin, K.-P. Hoyer, and M. Schaper, “Precipitation Hardening
in the Magnesium–Zinc–Calcium Alloy System,” in The Minerals, Metals &
Materials Series, Cham: Springer Nature Switzerland, 2025.'
mla: Braun, Marcel Patrick Klaus, et al. “Precipitation Hardening in the Magnesium–Zinc–Calcium
Alloy System.” The Minerals, Metals & Materials Series, Springer
Nature Switzerland, 2025, doi:10.1007/978-3-031-81061-9_12.
short: 'M.P.K. Braun, O. Grydin, K.-P. Hoyer, M. Schaper, in: The Minerals, Metals
& Materials Series, Springer Nature Switzerland, Cham, 2025.'
conference:
end_date: 2025-03-27
location: LAs Vegas, USA
name: TMS 2025. The Minerals, Metals & Materials
start_date: 2025-03-23
date_created: 2025-03-10T15:25:17Z
date_updated: 2025-03-10T15:27:29Z
department:
- _id: '9'
- _id: '158'
doi: 10.1007/978-3-031-81061-9_12
language:
- iso: eng
place: Cham
publication: The Minerals, Metals & Materials Series
publication_identifier:
isbn:
- '9783031810602'
- '9783031810619'
issn:
- 2367-1181
- 2367-1696
publication_status: published
publisher: Springer Nature Switzerland
quality_controlled: '1'
status: public
title: Precipitation Hardening in the Magnesium–Zinc–Calcium Alloy System
type: book_chapter
user_id: '48411'
year: '2025'
...
---
_id: '58971'
abstract:
- lang: ger
text: Ein wichtiger Bestandteil jeder Fahrzeugkarosserie sind Massebolzen, die zur
Herstellung der elektrischen Schnittstelle zwischen der leitfähigen Karosserie
und dem Bordnetz dienen. Eine zuverlässige Signal- und Leistungsübertragung erfor-dert
minimale Übergangswiderstände an den elektrischen Anschlusspunkten des Massebolzensystems
und muss ver-schiedenen Betriebs- und Umweltbedingungen über die gesamte Lebensdauer
standhalten. Der Übergangswiderstand wird von mehreren Faktoren beeinflusst (z.
B. Verbindungsgeometrie, Kontaktkraft, Temperatur, Werkstoff) und erhöht sich
im Laufe der Betriebszeit infolge unterschiedlicher Alterungsmechanismen. Dieser
Beitrag befasst sich mit der elektrischen Charakterisierung von Massebolzen aus
AlMg5 mit einer ZnNi-beschichteten Stahl-Hutmutter auf einem AlMg3-Blech. Es werden
ausgewählte fertigungs-, montage- und betriebsbedingte Einflussgrößen auf den
elektrischen Verbindungs-widerstand analysiert. Als wirtschaftliche und etablierte
Fügetechnologie kommt das Lichtbogenbolzenschweißen mit Hubzündung zum Einsatz.
Zur Herstellung qualitativ hochwertiger Schweißverbindungen wird mittels einer
statistischen Versuchsplanung ein geeigneter Referenzparametersatz ermittelt.
Weiterhin wird der montagebedingte Einfluss anhand des Mutter-Anziehmoments bei
der Kabelschuhmontage auf den elektrischen Verbindungswiderstand untersucht. Zusätzlich
werden die Strombelastbarkeit und der maximal zulässige Betriebsbereich des Massebolzensystems
ermittelt.
article_type: original
author:
- first_name: Viktor
full_name: Haak, Viktor
id: '60398'
last_name: Haak
- first_name: Keke
full_name: Yang, Keke
id: '65085'
last_name: Yang
orcid: 0000-0001-9201-9304
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: Haak V, Yang K, Meschut G. Einfluss von Schweißparametern und Montageverfahren
auf die elektrische Kontaktgüte von Aluminium-Massebolzen. Schweißen und Schneiden.
2025;3. doi:10.53192/SUS20250336
apa: Haak, V., Yang, K., & Meschut, G. (2025). Einfluss von Schweißparametern
und Montageverfahren auf die elektrische Kontaktgüte von Aluminium-Massebolzen.
Schweißen und Schneiden, 3. https://doi.org/10.53192/SUS20250336
bibtex: '@article{Haak_Yang_Meschut_2025, title={Einfluss von Schweißparametern
und Montageverfahren auf die elektrische Kontaktgüte von Aluminium-Massebolzen},
volume={3}, DOI={10.53192/SUS20250336},
journal={Schweißen und Schneiden}, publisher={DVS-Media}, author={Haak, Viktor
and Yang, Keke and Meschut, Gerson}, year={2025} }'
chicago: Haak, Viktor, Keke Yang, and Gerson Meschut. “Einfluss von Schweißparametern
und Montageverfahren auf die elektrische Kontaktgüte von Aluminium-Massebolzen.”
Schweißen und Schneiden 3 (2025). https://doi.org/10.53192/SUS20250336.
ieee: 'V. Haak, K. Yang, and G. Meschut, “Einfluss von Schweißparametern und Montageverfahren
auf die elektrische Kontaktgüte von Aluminium-Massebolzen,” Schweißen und Schneiden,
vol. 3, 2025, doi: 10.53192/SUS20250336.'
mla: Haak, Viktor, et al. “Einfluss von Schweißparametern und Montageverfahren auf
die elektrische Kontaktgüte von Aluminium-Massebolzen.” Schweißen und Schneiden,
vol. 3, DVS-Media, 2025, doi:10.53192/SUS20250336.
short: V. Haak, K. Yang, G. Meschut, Schweißen und Schneiden 3 (2025).
date_created: 2025-03-12T09:41:06Z
date_updated: 2025-03-12T09:41:39Z
department:
- _id: '157'
doi: 10.53192/SUS20250336
intvolume: ' 3'
language:
- iso: ger
main_file_link:
- url: https://www.schweissenundschneiden.de/artikel/einfluss-von-schweissparametern-und-montageverfahren-auf-die-elektrische-kontaktguete-von-aluminium-massebolzen
publication: Schweißen und Schneiden
publication_status: published
publisher: DVS-Media
quality_controlled: '1'
status: public
title: Einfluss von Schweißparametern und Montageverfahren auf die elektrische Kontaktgüte
von Aluminium-Massebolzen
type: journal_article
user_id: '65085'
volume: 3
year: '2025'
...
---
_id: '58968'
abstract:
- lang: eng
text: "Clashes of heterogeneous discourses are conceptualized differently within
the \r\nvarious strands of discourse research. To simplify, one can speak of synthesizing
positions \r\nof merging discourses on the one hand and difference-based positions
of heterogeneous \r\ndiscourses on the other. The latter position, which goes
far beyond intra- and extradiscursive conflicts that can ultimately be resolved,
can be related to Jean-Francois Lyotard‘s \r\nreflections on the incommensurability
of discourses: Starting from an understanding that \r\nevery discourse has certain
inner-discursive rules and that when heterogeneous discourses \r\nmeet, these
rules come into conflict, questions arise about the possibilities and limits of
\r\nhow different discourses deal with each other and their potential incommensurability.
The \r\nchallenges of the encounters between heterogeneous discourses can be comprehensively
\r\nand productively examined during the ‚Third Reich‘ and in relation to the
genre of resistance ‚Tarnschrift‘. In these camouflage writings, heterogeneous
discourses collide in a confined textual space, as the camouflage text corresponded
to the rules of the prevailing Nazi \r\ndiscourse and the camouflaged text embedded
in it corresponds to the rules of resistance \r\ndiscourses. This textual juxtaposition
of communicative expressions of different discourses \r\nallows us to analyse
procedures of discursive disruption, irritation and incommensurability. Starting
from a perspective based on Lyotard‘s considerations, camouflage writings are
\r\ntherefore to be analysed and reflected upon as a genre of discursive disruption"
author:
- first_name: Friedrich
full_name: Markewitz, Friedrich
id: '67227'
last_name: Markewitz
citation:
ama: 'Markewitz F. Tarnschriften als Widerstandsgattung der diskursiven Disruption.
In: Meier-Vieracker S, Bonacchi S, Acke H, Dang-Anh M, Warnke I, eds. Discourses
in/of Disruption. Vol 9. Online-only Publikationen des Leibniz-Instituts für
Deutsche Sprache. IDS; 2025:39-50.'
apa: Markewitz, F. (2025). Tarnschriften als Widerstandsgattung der diskursiven
Disruption. In S. Meier-Vieracker, S. Bonacchi, H. Acke, M. Dang-Anh, & I.
Warnke (Eds.), Discourses in/of Disruption (Vol. 9, pp. 39–50). IDS.
bibtex: '@inbook{Markewitz_2025, place={Mannheim}, series={Online-only Publikationen
des Leibniz-Instituts für Deutsche Sprache}, title={Tarnschriften als Widerstandsgattung
der diskursiven Disruption}, volume={9}, booktitle={Discourses in/of Disruption},
publisher={IDS}, author={Markewitz, Friedrich}, editor={Meier-Vieracker, Simon
and Bonacchi, Silvia and Acke, Hanna and Dang-Anh, Mark and Warnke, Ingo}, year={2025},
pages={39–50}, collection={Online-only Publikationen des Leibniz-Instituts für
Deutsche Sprache} }'
chicago: 'Markewitz, Friedrich. “Tarnschriften als Widerstandsgattung der diskursiven
Disruption.” In Discourses in/of Disruption, edited by Simon Meier-Vieracker,
Silvia Bonacchi, Hanna Acke, Mark Dang-Anh, and Ingo Warnke, 9:39–50. Online-only
Publikationen des Leibniz-Instituts für Deutsche Sprache. Mannheim: IDS, 2025.'
ieee: 'F. Markewitz, “Tarnschriften als Widerstandsgattung der diskursiven Disruption,”
in Discourses in/of Disruption, vol. 9, S. Meier-Vieracker, S. Bonacchi,
H. Acke, M. Dang-Anh, and I. Warnke, Eds. Mannheim: IDS, 2025, pp. 39–50.'
mla: Markewitz, Friedrich. “Tarnschriften als Widerstandsgattung der diskursiven
Disruption.” Discourses in/of Disruption, edited by Simon Meier-Vieracker
et al., vol. 9, IDS, 2025, pp. 39–50.
short: 'F. Markewitz, in: S. Meier-Vieracker, S. Bonacchi, H. Acke, M. Dang-Anh,
I. Warnke (Eds.), Discourses in/of Disruption, IDS, Mannheim, 2025, pp. 39–50.'
date_created: 2025-03-11T18:13:08Z
date_updated: 2025-03-11T18:13:16Z
editor:
- first_name: Simon
full_name: Meier-Vieracker, Simon
last_name: Meier-Vieracker
- first_name: Silvia
full_name: Bonacchi, Silvia
last_name: Bonacchi
- first_name: Hanna
full_name: Acke, Hanna
last_name: Acke
- first_name: Mark
full_name: Dang-Anh, Mark
last_name: Dang-Anh
- first_name: Ingo
full_name: Warnke, Ingo
last_name: Warnke
intvolume: ' 9'
keyword:
- camouflage writing
- incommensurability
- '"third reich"'
- resistance
language:
- iso: ger
main_file_link:
- open_access: '1'
url: https://idsopen.de/article/view/43/64
oa: '1'
page: 39-50
place: Mannheim
publication: Discourses in/of Disruption
publication_status: published
publisher: IDS
quality_controlled: '1'
series_title: Online-only Publikationen des Leibniz-Instituts für Deutsche Sprache
status: public
title: Tarnschriften als Widerstandsgattung der diskursiven Disruption
type: book_chapter
user_id: '67227'
volume: 9
year: '2025'
...
---
_id: '59154'
abstract:
- lang: eng
text: Abstract. Lightweight design is one of the central topics of the automotive
industry since reducing mass can save emissions over the entire life cycle of
a component. Nowadays, vehicle structures usually consist of a multi-material
design, which poses the additional challenge of joining these different materials.
Mechanical joining is the most common way of joining different types of materials.
Cast aluminium alloys of the AlSi system have a low ductility, which causes cracks
during the mechanical joining process in the joint. One research approach is to
achieve a fine microstructure by influencing the solidification rate since this
results in increased mechanical properties, specifically the elongation at fracture
and yield strength. A very fine microstructure can be achieved by utilizing Twin-roll
casting (TRC) which is a continuous casting process in which high solidification
rates of more than 100 K/s occur. In this study, the hypoeutectic cast aluminium
alloy AlSi9 is processed in the TRC process using copper rollers. The cast strips
are investigated regarding the microstructure-property correlation. A variation
of the roller materials and cooling conditions allows for an increase in the solidification
rate, whereby a defined, fine microstructure can be achieved, which enhances the
mechanical properties of the hypoeutectic aluminium casting alloys.
author:
- first_name: Moritz
full_name: Neuser, Moritz
id: '32340'
last_name: Neuser
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: 'Neuser M, Hoyer K-P, Schaper M. Processing of the hypoeutectic AlSi9 alloy
with twin-roll casting by using copper shells. In: Materials Research Proceedings.
Vol 52. Materials Research Forum LLC; 2025. doi:10.21741/9781644903551-26'
apa: Neuser, M., Hoyer, K.-P., & Schaper, M. (2025). Processing of the hypoeutectic
AlSi9 alloy with twin-roll casting by using copper shells. Materials Research
Proceedings, 52. https://doi.org/10.21741/9781644903551-26
bibtex: '@inproceedings{Neuser_Hoyer_Schaper_2025, title={Processing of the hypoeutectic
AlSi9 alloy with twin-roll casting by using copper shells}, volume={52}, DOI={10.21741/9781644903551-26},
booktitle={Materials Research Proceedings}, publisher={Materials Research Forum
LLC}, author={Neuser, Moritz and Hoyer, Kay-Peter and Schaper, Mirko}, year={2025}
}'
chicago: Neuser, Moritz, Kay-Peter Hoyer, and Mirko Schaper. “Processing of the
Hypoeutectic AlSi9 Alloy with Twin-Roll Casting by Using Copper Shells.” In Materials
Research Proceedings, Vol. 52. Materials Research Forum LLC, 2025. https://doi.org/10.21741/9781644903551-26.
ieee: 'M. Neuser, K.-P. Hoyer, and M. Schaper, “Processing of the hypoeutectic AlSi9
alloy with twin-roll casting by using copper shells,” in Materials Research
Proceedings, 2025, vol. 52, doi: 10.21741/9781644903551-26.'
mla: Neuser, Moritz, et al. “Processing of the Hypoeutectic AlSi9 Alloy with Twin-Roll
Casting by Using Copper Shells.” Materials Research Proceedings, vol. 52,
Materials Research Forum LLC, 2025, doi:10.21741/9781644903551-26.
short: 'M. Neuser, K.-P. Hoyer, M. Schaper, in: Materials Research Proceedings,
Materials Research Forum LLC, 2025.'
date_created: 2025-03-26T15:15:15Z
date_updated: 2025-03-26T15:17:46Z
department:
- _id: '9'
- _id: '158'
doi: 10.21741/9781644903551-26
intvolume: ' 52'
language:
- iso: eng
publication: Materials Research Proceedings
publication_identifier:
issn:
- 2474-395X
publication_status: published
publisher: Materials Research Forum LLC
quality_controlled: '1'
status: public
title: Processing of the hypoeutectic AlSi9 alloy with twin-roll casting by using
copper shells
type: conference
user_id: '48411'
volume: 52
year: '2025'
...
---
_id: '59155'
abstract:
- lang: eng
text: Abstract. Twin-Roll-Casting (TRC) is an energy- and cost-efficient
process to produce near-net-shape aluminum strips. Due to the high affinity of
molten aluminum to steel surfaces, those rollers show signs of wear throughout
the rolling campaign. This leads to the necessity of restoring the worn surfaces
to suitable parameters. The easiest way is to grind the surface till all superficial
defects are omitted. However, the thickness of the roller is not endless, therefore
the rollers must be replaced after a certain amount of surface reconditioning.
This ultimately leads to the non-usability of the roller. This research shows
a route to recondition the surface including the possibility of renewing worn-down
surfaces with an energy- and cost-efficient high-velocity oxygen fuel (HVOF) treatment
with subsequent grinding to the desired initial surface parameters.
author:
- first_name: Martin
full_name: Lauth, Martin
id: '13858'
last_name: Lauth
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
- first_name: Winfried
full_name: Gräfen, Winfried
last_name: Gräfen
citation:
ama: 'Lauth M, Hoyer K-P, Schaper M, Gräfen W. Cost-effective repair solution for
twin-roll-caster rollers. In: Materials Research Proceedings. Vol 52. Materials
Research Forum LLC; 2025. doi:10.21741/9781644903551-5'
apa: Lauth, M., Hoyer, K.-P., Schaper, M., & Gräfen, W. (2025). Cost-effective
repair solution for twin-roll-caster rollers. Materials Research Proceedings,
52. https://doi.org/10.21741/9781644903551-5
bibtex: '@inproceedings{Lauth_Hoyer_Schaper_Gräfen_2025, title={Cost-effective repair
solution for twin-roll-caster rollers}, volume={52}, DOI={10.21741/9781644903551-5},
booktitle={Materials Research Proceedings}, publisher={Materials Research Forum
LLC}, author={Lauth, Martin and Hoyer, Kay-Peter and Schaper, Mirko and Gräfen,
Winfried}, year={2025} }'
chicago: Lauth, Martin, Kay-Peter Hoyer, Mirko Schaper, and Winfried Gräfen. “Cost-Effective
Repair Solution for Twin-Roll-Caster Rollers.” In Materials Research Proceedings,
Vol. 52. Materials Research Forum LLC, 2025. https://doi.org/10.21741/9781644903551-5.
ieee: 'M. Lauth, K.-P. Hoyer, M. Schaper, and W. Gräfen, “Cost-effective repair
solution for twin-roll-caster rollers,” in Materials Research Proceedings,
2025, vol. 52, doi: 10.21741/9781644903551-5.'
mla: Lauth, Martin, et al. “Cost-Effective Repair Solution for Twin-Roll-Caster
Rollers.” Materials Research Proceedings, vol. 52, Materials Research Forum
LLC, 2025, doi:10.21741/9781644903551-5.
short: 'M. Lauth, K.-P. Hoyer, M. Schaper, W. Gräfen, in: Materials Research Proceedings,
Materials Research Forum LLC, 2025.'
date_created: 2025-03-26T15:16:31Z
date_updated: 2025-03-26T15:17:51Z
department:
- _id: '9'
- _id: '158'
doi: 10.21741/9781644903551-5
intvolume: ' 52'
language:
- iso: eng
publication: Materials Research Proceedings
publication_identifier:
issn:
- 2474-395X
publication_status: published
publisher: Materials Research Forum LLC
quality_controlled: '1'
status: public
title: Cost-effective repair solution for twin-roll-caster rollers
type: conference
user_id: '48411'
volume: 52
year: '2025'
...
---
_id: '59130'
author:
- first_name: Dennis
full_name: Kleinschmidt, Dennis
id: '40516'
last_name: Kleinschmidt
- first_name: Florian
full_name: Brüning, Florian
id: '72920'
last_name: Brüning
citation:
ama: Kleinschmidt D, Brüning F. Influence of pre-shearing on the rheological properties
of filled rubber compounds. KGK Kautschuk Gummi Kunststoffe. Published
online 2025.
apa: Kleinschmidt, D., & Brüning, F. (2025). Influence of pre-shearing on the
rheological properties of filled rubber compounds. KGK Kautschuk Gummi Kunststoffe.
bibtex: '@article{Kleinschmidt_Brüning_2025, title={Influence of pre-shearing on
the rheological properties of filled rubber compounds}, journal={KGK Kautschuk
Gummi Kunststoffe}, author={Kleinschmidt, Dennis and Brüning, Florian}, year={2025}
}'
chicago: Kleinschmidt, Dennis, and Florian Brüning. “Influence of Pre-Shearing on
the Rheological Properties of Filled Rubber Compounds.” KGK Kautschuk Gummi
Kunststoffe, 2025.
ieee: D. Kleinschmidt and F. Brüning, “Influence of pre-shearing on the rheological
properties of filled rubber compounds,” KGK Kautschuk Gummi Kunststoffe,
2025.
mla: Kleinschmidt, Dennis, and Florian Brüning. “Influence of Pre-Shearing on the
Rheological Properties of Filled Rubber Compounds.” KGK Kautschuk Gummi Kunststoffe,
2025.
short: D. Kleinschmidt, F. Brüning, KGK Kautschuk Gummi Kunststoffe (2025).
date_created: 2025-03-25T09:55:44Z
date_updated: 2025-03-27T14:13:53Z
department:
- _id: '9'
- _id: '321'
- _id: '367'
keyword:
- Rheologie
- Viskosität
- Wandgleiten
language:
- iso: eng
publication: KGK Kautschuk Gummi Kunststoffe
quality_controlled: '1'
status: public
title: Influence of pre-shearing on the rheological properties of filled rubber compounds
type: journal_article
user_id: '59363'
year: '2025'
...
---
_id: '59222'
author:
- first_name: Khoren
full_name: Grigoryan, Khoren
last_name: Grigoryan
- first_name: Lucas
full_name: Martin, Lucas
last_name: Martin
- first_name: Timm
full_name: Fichtler, Timm
id: '66731'
last_name: Fichtler
orcid: https://orcid.org/0000-0001-6034-4399
- first_name: Jannik
full_name: Reinhold, Jannik
last_name: Reinhold
- first_name: Laban
full_name: Asmar, Laban
last_name: Asmar
- first_name: Arno
full_name: Kühn, Arno
last_name: Kühn
- first_name: Roman
full_name: Dumitrescu, Roman
id: '16190'
last_name: Dumitrescu
citation:
ama: 'Grigoryan K, Martin L, Fichtler T, et al. Leitfaden zur Planung von Datenanalysen
zur Entscheidungsunterstützung im Produktmanagement. In: Dumitrescu R, Hölzle
K, eds. Vorausschau Und Technologieplanung - 18. Symposium Für Vorausschau
Und Technologieplanung. Verlagsschriftenreihe des Heinz Nixdorf Instituts;
2025.'
apa: Grigoryan, K., Martin, L., Fichtler, T., Reinhold, J., Asmar, L., Kühn, A.,
& Dumitrescu, R. (2025). Leitfaden zur Planung von Datenanalysen zur Entscheidungsunterstützung
im Produktmanagement. In R. Dumitrescu & K. Hölzle (Eds.), Vorausschau
und Technologieplanung - 18. Symposium für Vorausschau und Technologieplanung.
Verlagsschriftenreihe des Heinz Nixdorf Instituts.
bibtex: '@inproceedings{Grigoryan_Martin_Fichtler_Reinhold_Asmar_Kühn_Dumitrescu_2025,
place={Paderborn}, title={Leitfaden zur Planung von Datenanalysen zur Entscheidungsunterstützung
im Produktmanagement}, booktitle={Vorausschau und Technologieplanung - 18. Symposium
für Vorausschau und Technologieplanung}, publisher={Verlagsschriftenreihe des
Heinz Nixdorf Instituts}, author={Grigoryan, Khoren and Martin, Lucas and Fichtler,
Timm and Reinhold, Jannik and Asmar, Laban and Kühn, Arno and Dumitrescu, Roman},
editor={Dumitrescu, Roman and Hölzle, Katharina}, year={2025} }'
chicago: 'Grigoryan, Khoren, Lucas Martin, Timm Fichtler, Jannik Reinhold, Laban
Asmar, Arno Kühn, and Roman Dumitrescu. “Leitfaden Zur Planung von Datenanalysen
Zur Entscheidungsunterstützung Im Produktmanagement.” In Vorausschau Und Technologieplanung
- 18. Symposium Für Vorausschau Und Technologieplanung, edited by Roman Dumitrescu
and Katharina Hölzle. Paderborn: Verlagsschriftenreihe des Heinz Nixdorf Instituts,
2025.'
ieee: K. Grigoryan et al., “Leitfaden zur Planung von Datenanalysen zur Entscheidungsunterstützung
im Produktmanagement,” in Vorausschau und Technologieplanung - 18. Symposium
für Vorausschau und Technologieplanung, Berlin, 2025.
mla: Grigoryan, Khoren, et al. “Leitfaden Zur Planung von Datenanalysen Zur Entscheidungsunterstützung
Im Produktmanagement.” Vorausschau Und Technologieplanung - 18. Symposium Für
Vorausschau Und Technologieplanung, edited by Roman Dumitrescu and Katharina
Hölzle, Verlagsschriftenreihe des Heinz Nixdorf Instituts, 2025.
short: 'K. Grigoryan, L. Martin, T. Fichtler, J. Reinhold, L. Asmar, A. Kühn, R.
Dumitrescu, in: R. Dumitrescu, K. Hölzle (Eds.), Vorausschau Und Technologieplanung
- 18. Symposium Für Vorausschau Und Technologieplanung, Verlagsschriftenreihe
des Heinz Nixdorf Instituts, Paderborn, 2025.'
conference:
end_date: 2024-12-06
location: Berlin
name: Symposium für Vorausschau und Technologieplanung
start_date: 2024-12-05
date_created: 2025-03-31T16:31:23Z
date_updated: 2025-03-31T16:31:33Z
editor:
- first_name: Roman
full_name: Dumitrescu, Roman
last_name: Dumitrescu
- first_name: Katharina
full_name: Hölzle, Katharina
last_name: Hölzle
language:
- iso: eng
place: Paderborn
publication: Vorausschau und Technologieplanung - 18. Symposium für Vorausschau und
Technologieplanung
publisher: Verlagsschriftenreihe des Heinz Nixdorf Instituts
quality_controlled: '1'
status: public
title: Leitfaden zur Planung von Datenanalysen zur Entscheidungsunterstützung im Produktmanagement
type: conference
user_id: '66731'
year: '2025'
...