---
_id: '60524'
abstract:
- lang: ger
text: Damit sich Lehramtsstudierende Genderkompetenz im Studium aneignen können,
ist es zunächst notwendig, diese zur Reflexion über Gender anzuregen – so die
These dieses Beitrags. Kompetenzen entstehen durch die Aneignung von Kenntnissen,
Fähigkeiten, Fertigkeiten und Werthaltungen und sind an Sozialisationserfahrungen
und damit inkorporierte Handlungsweisen und Normen gebunden Genderkompetenz ist
notwendig, um Schülerinnen und Schülern gleiche Entwicklungschancen jenseits geschlechtsspezifischer
Zuschreibungen zu ermöglichen und bei angehenden Lehrkräften umfassende Genderkompetenz
zu etablieren. Dabei ist Gender sozial konstruiert, was als „doing gender“ bezeichnet
wird. Der vorliegende Beitrag stellt ein Seminarkonzept vor, in dem über den Doing-Gender-Ansatz
die alltägliche Herstellung von Geschlecht in den Mittelpunkt gerückt wird. Erst
wenn – so die Grundannahme des Beitrags – verstanden ist, wie Geschlecht in der
Gesellschaft über das Doing Gender (re)produziert wird, kann das Doing durch eigene
Verhaltensänderungen verändert werden. Wie dies erreicht werden kann, wird im
Folgenden dargestellt. Dazu wird zunächst das Seminarkonzept vorgestellt, in dem
durch die Reflexion einer schulischen Situation, in die die Studierenden selbst
involviert waren, das Doing Gender aufgedeckt wird. Anschließend wird eine Typologie
von Situationen vorgestellt, die auf den Portfolios von fünf Seminaren (WS 21/22bis
WS 23/24) basiert. Abschließend wird evaluiert, inwieweit ein Kompetenzerwerb
in Bezug auf Gender im Seminar stattgefunden hat.
author:
- first_name: Isabel
full_name: Steinhardt, Isabel
id: '90339'
last_name: Steinhardt
orcid: https://orcid.org/0000-0002-2590-6189
citation:
ama: 'Steinhardt I. Doing Gender Reflexionen im Lehramtsstudium. In: Glockentöger
I, ed. Förderung von Genderkompetenz in der Ausbildung von Lehrkräften.
wbv; 2025:203-209.'
apa: Steinhardt, I. (2025). Doing Gender Reflexionen im Lehramtsstudium. In I. Glockentöger
(Ed.), Förderung von Genderkompetenz in der Ausbildung von Lehrkräften
(pp. 203–209). wbv.
bibtex: '@inbook{Steinhardt_2025, place={Bielefeld}, title={Doing Gender Reflexionen
im Lehramtsstudium}, booktitle={Förderung von Genderkompetenz in der Ausbildung
von Lehrkräften}, publisher={wbv}, author={Steinhardt, Isabel}, editor={Glockentöger,
Ilke}, year={2025}, pages={203–209} }'
chicago: 'Steinhardt, Isabel. “Doing Gender Reflexionen im Lehramtsstudium.” In
Förderung von Genderkompetenz in der Ausbildung von Lehrkräften, edited
by Ilke Glockentöger, 203–9. Bielefeld: wbv, 2025.'
ieee: 'I. Steinhardt, “Doing Gender Reflexionen im Lehramtsstudium,” in Förderung
von Genderkompetenz in der Ausbildung von Lehrkräften, I. Glockentöger, Ed.
Bielefeld: wbv, 2025, pp. 203–209.'
mla: Steinhardt, Isabel. “Doing Gender Reflexionen im Lehramtsstudium.” Förderung
von Genderkompetenz in der Ausbildung von Lehrkräften, edited by Ilke Glockentöger,
wbv, 2025, pp. 203–09.
short: 'I. Steinhardt, in: I. Glockentöger (Ed.), Förderung von Genderkompetenz
in der Ausbildung von Lehrkräften, wbv, Bielefeld, 2025, pp. 203–209.'
date_created: 2025-07-06T14:27:53Z
date_updated: 2025-09-05T13:08:17Z
ddc:
- '300'
department:
- _id: '121'
editor:
- first_name: Ilke
full_name: Glockentöger, Ilke
last_name: Glockentöger
file:
- access_level: open_access
content_type: application/pdf
creator: isste
date_created: 2025-07-06T14:27:25Z
date_updated: 2025-07-06T14:27:25Z
file_id: '60525'
file_name: 2025 Steinhardt Doing Gender.pdf
file_size: 186494
relation: main_file
file_date_updated: 2025-07-06T14:27:25Z
has_accepted_license: '1'
keyword:
- Doing Gender
- Lehramt
- Kompetenzen
language:
- iso: ger
main_file_link:
- open_access: '1'
url: https://www.researchgate.net/publication/393163707_Doing_Gender_Reflexionen_im_Lehramtsstudium
oa: '1'
page: 203-209
place: Bielefeld
publication: Förderung von Genderkompetenz in der Ausbildung von Lehrkräften
publication_status: published
publisher: wbv
quality_controlled: '1'
status: public
title: Doing Gender Reflexionen im Lehramtsstudium
type: book_chapter
user_id: '90339'
year: '2025'
...
---
_id: '60678'
citation:
ama: Rezat S, Schindler K, eds. KI und Schreiben. Vol 311.; 2025.
apa: KI und Schreiben. (2025). In S. Rezat & K. Schindler (Eds.), Praxis
Deutsch (Vol. 311).
bibtex: '@book{Rezat_Schindler_2025, title={KI und Schreiben.}, volume={311}, journal={Praxis
Deutsch}, year={2025} }'
chicago: Rezat, Sara, and Kirsten Schindler, eds. KI und Schreiben. Praxis
Deutsch. Vol. 311, 2025.
ieee: S. Rezat and K. Schindler, Eds., KI und Schreiben., vol. 311. 2025.
mla: Rezat, Sara, and Kirsten Schindler, editors. “KI und Schreiben.” Praxis
Deutsch, vol. 311, 2025.
short: S. Rezat, K. Schindler, eds., KI und Schreiben., 2025.
date_created: 2025-07-21T06:38:58Z
date_updated: 2025-09-04T13:11:28Z
editor:
- first_name: Sara
full_name: Rezat, Sara
id: '58338'
last_name: Rezat
- first_name: Kirsten
full_name: Schindler, Kirsten
last_name: Schindler
intvolume: ' 311'
language:
- iso: ger
publication: Praxis Deutsch
publication_status: published
quality_controlled: '1'
status: public
title: KI und Schreiben.
type: journal_editor
user_id: '58338'
volume: 311
year: '2025'
...
---
_id: '61154'
author:
- first_name: Olcay
full_name: Türk, Olcay
last_name: Türk
- first_name: Stefan Teodorov
full_name: Lazarov, Stefan Teodorov
id: '90345'
last_name: Lazarov
orcid: 0009-0009-0892-9483
- first_name: Hendrik
full_name: Buschmeier, Hendrik
id: '76456'
last_name: Buschmeier
orcid: 0000-0002-9613-5713
- first_name: Petra
full_name: Wagner, Petra
id: '74505'
last_name: Wagner
- first_name: Angela
full_name: Grimminger, Angela
id: '57578'
last_name: Grimminger
citation:
ama: 'Türk O, Lazarov ST, Buschmeier H, Wagner P, Grimminger A. Acoustic detection
of false positive backchannels of understanding in explanations. In: LingCologne
2025 – Book of Abstracts. ; 2025:36.'
apa: Türk, O., Lazarov, S. T., Buschmeier, H., Wagner, P., & Grimminger, A.
(2025). Acoustic detection of false positive backchannels of understanding in
explanations. LingCologne 2025 – Book of Abstracts, 36.
bibtex: '@inproceedings{Türk_Lazarov_Buschmeier_Wagner_Grimminger_2025, title={Acoustic
detection of false positive backchannels of understanding in explanations}, booktitle={LingCologne
2025 – Book of Abstracts}, author={Türk, Olcay and Lazarov, Stefan Teodorov and
Buschmeier, Hendrik and Wagner, Petra and Grimminger, Angela}, year={2025}, pages={36}
}'
chicago: Türk, Olcay, Stefan Teodorov Lazarov, Hendrik Buschmeier, Petra Wagner,
and Angela Grimminger. “Acoustic Detection of False Positive Backchannels of Understanding
in Explanations.” In LingCologne 2025 – Book of Abstracts, 36, 2025.
ieee: O. Türk, S. T. Lazarov, H. Buschmeier, P. Wagner, and A. Grimminger, “Acoustic
detection of false positive backchannels of understanding in explanations,” in
LingCologne 2025 – Book of Abstracts, Cologne, Germany, 2025, p. 36.
mla: Türk, Olcay, et al. “Acoustic Detection of False Positive Backchannels of Understanding
in Explanations.” LingCologne 2025 – Book of Abstracts, 2025, p. 36.
short: 'O. Türk, S.T. Lazarov, H. Buschmeier, P. Wagner, A. Grimminger, in: LingCologne
2025 – Book of Abstracts, 2025, p. 36.'
conference:
end_date: 2025-05-23
location: Cologne, Germany
name: LingCologne 2025 International Conference on Feedback in Interaction
start_date: 2025-05-21
date_created: 2025-09-08T14:21:30Z
date_updated: 2025-09-11T06:58:18Z
department:
- _id: '660'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://pub.uni-bielefeld.de/download/3003514/3003515/Turk-etal-2025-lingcologne.pdf
oa: '1'
page: '36'
project:
- _id: '112'
name: 'TRR 318; TP A02: Verstehensprozess einer Erklärung beobachten und auswerten'
publication: LingCologne 2025 – Book of Abstracts
publication_status: published
quality_controlled: '1'
status: public
title: Acoustic detection of false positive backchannels of understanding in explanations
type: conference_abstract
user_id: '76456'
year: '2025'
...
---
_id: '60949'
author:
- first_name: Henning
full_name: Giese, Henning
id: '92812'
last_name: Giese
- first_name: Svea
full_name: Holtmann, Svea
last_name: Holtmann
- first_name: Reinald
full_name: Koch, Reinald
last_name: Koch
- first_name: Dominika
full_name: Langenmayr, Dominika
last_name: Langenmayr
citation:
ama: 'Giese H, Holtmann S, Koch R, Langenmayr D. Steuerliches Investitionssofortprogramm:
Ausreichender Schritt zur Stärkung des Wirtschaftsstandorts Deutschland? ifo
Schnelldienst. 2025;78(8):34-40.'
apa: 'Giese, H., Holtmann, S., Koch, R., & Langenmayr, D. (2025). Steuerliches
Investitionssofortprogramm: Ausreichender Schritt zur Stärkung des Wirtschaftsstandorts
Deutschland? ifo Schnelldienst, 78(8), 34–40.'
bibtex: '@article{Giese_Holtmann_Koch_Langenmayr_2025, title={Steuerliches Investitionssofortprogramm:
Ausreichender Schritt zur Stärkung des Wirtschaftsstandorts Deutschland?}, volume={78},
number={8}, journal={ifo Schnelldienst}, author={Giese, Henning and Holtmann,
Svea and Koch, Reinald and Langenmayr, Dominika}, year={2025}, pages={34–40} }'
chicago: 'Giese, Henning, Svea Holtmann, Reinald Koch, and Dominika Langenmayr.
“Steuerliches Investitionssofortprogramm: Ausreichender Schritt zur Stärkung des
Wirtschaftsstandorts Deutschland?” ifo Schnelldienst 78, no. 8 (2025):
34–40.'
ieee: 'H. Giese, S. Holtmann, R. Koch, and D. Langenmayr, “Steuerliches Investitionssofortprogramm:
Ausreichender Schritt zur Stärkung des Wirtschaftsstandorts Deutschland?,” ifo
Schnelldienst, vol. 78, no. 8, pp. 34–40, 2025.'
mla: 'Giese, Henning, et al. “Steuerliches Investitionssofortprogramm: Ausreichender
Schritt zur Stärkung des Wirtschaftsstandorts Deutschland?” ifo Schnelldienst,
vol. 78, no. 8, 2025, pp. 34–40.'
short: H. Giese, S. Holtmann, R. Koch, D. Langenmayr, ifo Schnelldienst 78 (2025)
34–40.
date_created: 2025-08-19T10:16:55Z
date_updated: 2025-09-11T08:11:07Z
department:
- _id: '187'
intvolume: ' 78'
issue: '8'
language:
- iso: ger
page: 34-40
publication: ifo Schnelldienst
quality_controlled: '1'
status: public
title: 'Steuerliches Investitionssofortprogramm: Ausreichender Schritt zur Stärkung
des Wirtschaftsstandorts Deutschland?'
type: journal_article
user_id: '97894'
volume: 78
year: '2025'
...
---
_id: '61123'
abstract:
- lang: eng
text: Knowledge graphs are used by a growing number of applications to represent
structured data. Hence, evaluating the veracity of assertions in knowledge graphs—dubbed
fact checking—is currently a challenge of growing importance. However, manual
fact checking is commonly impractical due to the sheer size of knowledge graphs.
This paper is a systematic survey of recent works on automatic fact checking with
a focus on knowledge graphs. We present recent fact-checking approaches, the varied
sources they use as background knowledge, and the features they rely upon. Finally,
we draw conclusions pertaining to possible future research directions in fact
checking knowledge graphs.
article_number: '3749838'
article_type: original
author:
- first_name: Umair
full_name: Qudus, Umair
id: '83392'
last_name: Qudus
orcid: 0000-0001-6714-8729
- first_name: Michael
full_name: Röder, Michael
id: '67199'
last_name: Röder
orcid: https://orcid.org/0000-0002-8609-8277
- first_name: Muhammad
full_name: Saleem, Muhammad
last_name: Saleem
- first_name: Axel-Cyrille
full_name: Ngonga Ngomo, Axel-Cyrille
id: '65716'
last_name: Ngonga Ngomo
citation:
ama: Qudus U, Röder M, Saleem M, Ngonga Ngomo A-C. Fact Checking Knowledge Graphs
-- A Survey. ACM Computing Surveys. 2025;58. doi:10.1145/3749838
apa: Qudus, U., Röder, M., Saleem, M., & Ngonga Ngomo, A.-C. (2025). Fact Checking
Knowledge Graphs -- A Survey. ACM Computing Surveys, 58, Article
3749838. https://doi.org/10.1145/3749838
bibtex: '@article{Qudus_Röder_Saleem_Ngonga Ngomo_2025, title={Fact Checking Knowledge
Graphs -- A Survey}, volume={58}, DOI={10.1145/3749838},
number={3749838}, journal={ACM Computing Surveys}, publisher={Association for
Computing Machinery (ACM)}, author={Qudus, Umair and Röder, Michael and Saleem,
Muhammad and Ngonga Ngomo, Axel-Cyrille}, year={2025} }'
chicago: Qudus, Umair, Michael Röder, Muhammad Saleem, and Axel-Cyrille Ngonga Ngomo.
“Fact Checking Knowledge Graphs -- A Survey.” ACM Computing Surveys 58
(2025). https://doi.org/10.1145/3749838.
ieee: 'U. Qudus, M. Röder, M. Saleem, and A.-C. Ngonga Ngomo, “Fact Checking Knowledge
Graphs -- A Survey,” ACM Computing Surveys, vol. 58, Art. no. 3749838,
2025, doi: 10.1145/3749838.'
mla: Qudus, Umair, et al. “Fact Checking Knowledge Graphs -- A Survey.” ACM Computing
Surveys, vol. 58, 3749838, Association for Computing Machinery (ACM), 2025,
doi:10.1145/3749838.
short: U. Qudus, M. Röder, M. Saleem, A.-C. Ngonga Ngomo, ACM Computing Surveys
58 (2025).
date_created: 2025-09-03T15:46:43Z
date_updated: 2025-09-11T09:30:28Z
ddc:
- '006'
department:
- _id: '574'
doi: 10.1145/3749838
external_id:
unknown:
- 10.1145/3749838
file:
- access_level: closed
content_type: application/pdf
creator: uqudus
date_created: 2025-09-11T09:26:29Z
date_updated: 2025-09-11T09:26:29Z
file_id: '61195'
file_name: 3749838.pdf
file_size: 1062387
relation: main_file
success: 1
file_date_updated: 2025-09-11T09:26:29Z
has_accepted_license: '1'
intvolume: ' 58'
keyword:
- fact checking
- knowledge graphs
- fact-checkers
- check worthiness
- evidence retrieval
- trust
- veracity.
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://dl.acm.org/doi/pdf/10.1145/3749838
oa: '1'
popular_science: '1'
publication: ACM Computing Surveys
publication_identifier:
issn:
- 0360-0300
- 1557-7341
publication_status: published
publisher: Association for Computing Machinery (ACM)
quality_controlled: '1'
status: public
title: Fact Checking Knowledge Graphs -- A Survey
type: journal_article
user_id: '83392'
volume: 58
year: '2025'
...
---
_id: '65011'
abstract:
- lang: eng
text: "Abstract\r\n Design of
single screw machines for polymer processing often focuses on the melt dominated
areas of the screw. However, solids conveying is a key aspect for processes with
high screw speeds, grooved feed sections, small screw diameters and material with
low bulk density. In injection moulding, throughput limitations are highly relevant
in packaging applications as due to low cooling times, plasticizing affects the
cycle time. In addition, insufficient solids conveying is a primary cause for
air residues in the melt and final product. Therefore, well-designed feed sections
are required, especially as direct processing of regrind in recycling applications
becomes more relevant due to governmental restrictions. Existing models for injection
moulding are based on analytical equations and do not allow to assess new feed
sections and feed opening designs, adapted to high screw speeds or regrind. In
this paper, numerical simulations based on the Discrete Element Method (DEM),
previously used in the field of extrusion, are carried out. In order to replicate
the cyclic, superimposed rotation and translation of the screw, a coupled approach
of DEM and Multibody Systems Simulation (MBS) is pursued. To verify the accuracy
of such coupled simulations, a special test setup is added to a conventional injection
moulding machine. Pure solids conveying is investigated, as DEM does not accommodate
for large plastic deformations or melting. Different screw and intake designs
as well as smooth and grooved barrels are investigated. Selected resins, pellet
shapes and regrind are processed, varying the processing parameters and comparing
the results to the simulation. The coupled approach replicates reality well in
terms of throughput, confirming that DEM can be utilised to further investigate
process phenomena and develop calculation models for solids conveying in injection
moulding."
author:
- first_name: Jan
full_name: Landgräber, Jan
id: '64499'
last_name: Landgräber
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
- first_name: Florian
full_name: Brüning, Florian
id: '72920'
last_name: Brüning
citation:
ama: Landgräber J, Schöppner V, Brüning F. Assessing solids conveying in injection
moulding machines using coupled numerical simulations based on the discrete element
method (DEM) and multibody systems (MBS). International Polymer Processing.
2025;41(1):1-14. doi:10.1515/ipp-2025-0065
apa: Landgräber, J., Schöppner, V., & Brüning, F. (2025). Assessing solids conveying
in injection moulding machines using coupled numerical simulations based on the
discrete element method (DEM) and multibody systems (MBS). International Polymer
Processing, 41(1), 1–14. https://doi.org/10.1515/ipp-2025-0065
bibtex: '@article{Landgräber_Schöppner_Brüning_2025, title={Assessing solids conveying
in injection moulding machines using coupled numerical simulations based on the
discrete element method (DEM) and multibody systems (MBS)}, volume={41}, DOI={10.1515/ipp-2025-0065}, number={1},
journal={International Polymer Processing}, publisher={Walter de Gruyter GmbH},
author={Landgräber, Jan and Schöppner, Volker and Brüning, Florian}, year={2025},
pages={1–14} }'
chicago: 'Landgräber, Jan, Volker Schöppner, and Florian Brüning. “Assessing Solids
Conveying in Injection Moulding Machines Using Coupled Numerical Simulations Based
on the Discrete Element Method (DEM) and Multibody Systems (MBS).” International
Polymer Processing 41, no. 1 (2025): 1–14. https://doi.org/10.1515/ipp-2025-0065.'
ieee: 'J. Landgräber, V. Schöppner, and F. Brüning, “Assessing solids conveying
in injection moulding machines using coupled numerical simulations based on the
discrete element method (DEM) and multibody systems (MBS),” International Polymer
Processing, vol. 41, no. 1, pp. 1–14, 2025, doi: 10.1515/ipp-2025-0065.'
mla: Landgräber, Jan, et al. “Assessing Solids Conveying in Injection Moulding Machines
Using Coupled Numerical Simulations Based on the Discrete Element Method (DEM)
and Multibody Systems (MBS).” International Polymer Processing, vol. 41,
no. 1, Walter de Gruyter GmbH, 2025, pp. 1–14, doi:10.1515/ipp-2025-0065.
short: J. Landgräber, V. Schöppner, F. Brüning, International Polymer Processing
41 (2025) 1–14.
date_created: 2026-03-16T14:34:08Z
date_updated: 2026-03-16T14:36:35Z
department:
- _id: '9'
- _id: '321'
- _id: '367'
doi: 10.1515/ipp-2025-0065
intvolume: ' 41'
issue: '1'
language:
- iso: eng
page: 1-14
publication: International Polymer Processing
publication_identifier:
issn:
- 0930-777X
- 2195-8602
publication_status: published
publisher: Walter de Gruyter GmbH
quality_controlled: '1'
status: public
title: Assessing solids conveying in injection moulding machines using coupled numerical
simulations based on the discrete element method (DEM) and multibody systems (MBS)
type: journal_article
user_id: '59363'
volume: 41
year: '2025'
...
---
_id: '65012'
article_number: '104968'
author:
- first_name: Jan
full_name: Landgräber, Jan
id: '64499'
last_name: Landgräber
- first_name: Florian
full_name: Brüning, Florian
id: '72920'
last_name: Brüning
citation:
ama: Landgräber J, Brüning F. Discrete element method in polymer processing – Method
for development of material models. Advanced Powder Technology. 2025;36(8).
doi:10.1016/j.apt.2025.104968
apa: Landgräber, J., & Brüning, F. (2025). Discrete element method in polymer
processing – Method for development of material models. Advanced Powder Technology,
36(8), Article 104968. https://doi.org/10.1016/j.apt.2025.104968
bibtex: '@article{Landgräber_Brüning_2025, title={Discrete element method in polymer
processing – Method for development of material models}, volume={36}, DOI={10.1016/j.apt.2025.104968},
number={8104968}, journal={Advanced Powder Technology}, publisher={Elsevier BV},
author={Landgräber, Jan and Brüning, Florian}, year={2025} }'
chicago: Landgräber, Jan, and Florian Brüning. “Discrete Element Method in Polymer
Processing – Method for Development of Material Models.” Advanced Powder Technology
36, no. 8 (2025). https://doi.org/10.1016/j.apt.2025.104968.
ieee: 'J. Landgräber and F. Brüning, “Discrete element method in polymer processing
– Method for development of material models,” Advanced Powder Technology,
vol. 36, no. 8, Art. no. 104968, 2025, doi: 10.1016/j.apt.2025.104968.'
mla: Landgräber, Jan, and Florian Brüning. “Discrete Element Method in Polymer Processing
– Method for Development of Material Models.” Advanced Powder Technology,
vol. 36, no. 8, 104968, Elsevier BV, 2025, doi:10.1016/j.apt.2025.104968.
short: J. Landgräber, F. Brüning, Advanced Powder Technology 36 (2025).
date_created: 2026-03-16T14:36:01Z
date_updated: 2026-03-16T14:36:33Z
doi: 10.1016/j.apt.2025.104968
intvolume: ' 36'
issue: '8'
language:
- iso: eng
publication: Advanced Powder Technology
publication_identifier:
issn:
- 0921-8831
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Discrete element method in polymer processing – Method for development of material
models
type: journal_article
user_id: '59363'
volume: 36
year: '2025'
...
---
_id: '61823'
article_type: original
author:
- first_name: Christoph
full_name: Jacke, Christoph
id: '20747'
last_name: Jacke
citation:
ama: Jacke C. Die drei Rollen der Star-Figur. Sarah Connors Abrechnung. POP Kultur
& Kritik. 2025;(27):96-101.
apa: Jacke, C. (2025). Die drei Rollen der Star-Figur. Sarah Connors Abrechnung.
POP. Kultur & Kritik, 27, 96–101.
bibtex: '@article{Jacke_2025, title={Die drei Rollen der Star-Figur. Sarah Connors
Abrechnung.}, number={27}, journal={POP. Kultur & Kritik}, publisher={Transcript},
author={Jacke, Christoph}, year={2025}, pages={96–101} }'
chicago: 'Jacke, Christoph. “Die drei Rollen der Star-Figur. Sarah Connors Abrechnung.”
POP. Kultur & Kritik, no. 27 (2025): 96–101.'
ieee: C. Jacke, “Die drei Rollen der Star-Figur. Sarah Connors Abrechnung.,” POP.
Kultur & Kritik, no. 27, pp. 96–101, 2025.
mla: Jacke, Christoph. “Die drei Rollen der Star-Figur. Sarah Connors Abrechnung.”
POP. Kultur & Kritik, no. 27, Transcript, 2025, pp. 96–101.
short: C. Jacke, POP. Kultur & Kritik (2025) 96–101.
date_created: 2025-10-14T09:39:14Z
date_updated: 2026-03-17T09:40:49Z
department:
- _id: '607'
- _id: '817'
issue: '27'
keyword:
- Stars
- Sarah Connor
- Rollen
- Qualitätsjournalismus
- Boulevard
- Fans
language:
- iso: ger
page: 96-101
publication: POP. Kultur & Kritik
publication_status: published
publisher: Transcript
quality_controlled: '1'
status: public
title: Die drei Rollen der Star-Figur. Sarah Connors Abrechnung.
type: journal_article
user_id: '20747'
year: '2025'
...
---
_id: '65038'
abstract:
- lang: eng
text: The rapid advancements in digital transformation have led to the emergence
of dataspaces as a pivotal element for industry-wide and cross-industry data integration
and interoperability across various businesses. Despite their potential, the adoption
and effective utilization of dataspaces by business stakeholders remain challenging.
This paper aims to address this gap by developing a comprehensive learning environment
tailored for business stakeholders. Through an interview study and an analysis
of the current state of research, we identify problem fields and derive key requirements
for the development of the learning environment. The proposed environment includes
a demonstrator and a training concept designed to enhance stakeholders' understanding
and capabilities in managing and leveraging dataspaces. Our findings contribute
to the body of knowledge by providing practical guidance through learning environments
for the deployment of dataspaces in business contexts and highlighting areas for
future research.
author:
- first_name: Jonas
full_name: Lick, Jonas
last_name: Lick
- first_name: Jessica
full_name: Lamarz, Jessica
last_name: Lamarz
- first_name: Friederike
full_name: Dohmann, Friederike
last_name: Dohmann
- first_name: Pranav Jayant
full_name: Kulkarni, Pranav Jayant
id: '86782'
last_name: Kulkarni
- first_name: Julian
full_name: Zerbin, Julian
id: '51711'
last_name: Zerbin
- first_name: Christian
full_name: Koldewey, Christian
id: '43136'
last_name: Koldewey
orcid: https://orcid.org/0000-0001-7992-6399
citation:
ama: 'Lick J, Lamarz J, Dohmann F, Kulkarni PJ, Zerbin J, Koldewey C. Guidance on
Dataspaces: Development of a Learning Environment for Industrial SMEs. In: 2024
6th International Conference on Control and Robotics (ICCR). IEEE; 2025. doi:10.1109/iccr64365.2024.10927580'
apa: 'Lick, J., Lamarz, J., Dohmann, F., Kulkarni, P. J., Zerbin, J., & Koldewey,
C. (2025). Guidance on Dataspaces: Development of a Learning Environment for Industrial
SMEs. 2024 6th International Conference on Control and Robotics (ICCR).
6th International Conference on Control and Robotics (ICCR), Yokohama, Japan .
https://doi.org/10.1109/iccr64365.2024.10927580'
bibtex: '@inproceedings{Lick_Lamarz_Dohmann_Kulkarni_Zerbin_Koldewey_2025, title={Guidance
on Dataspaces: Development of a Learning Environment for Industrial SMEs}, DOI={10.1109/iccr64365.2024.10927580},
booktitle={2024 6th International Conference on Control and Robotics (ICCR)},
publisher={IEEE}, author={Lick, Jonas and Lamarz, Jessica and Dohmann, Friederike
and Kulkarni, Pranav Jayant and Zerbin, Julian and Koldewey, Christian}, year={2025}
}'
chicago: 'Lick, Jonas, Jessica Lamarz, Friederike Dohmann, Pranav Jayant Kulkarni,
Julian Zerbin, and Christian Koldewey. “Guidance on Dataspaces: Development of
a Learning Environment for Industrial SMEs.” In 2024 6th International Conference
on Control and Robotics (ICCR). IEEE, 2025. https://doi.org/10.1109/iccr64365.2024.10927580.'
ieee: 'J. Lick, J. Lamarz, F. Dohmann, P. J. Kulkarni, J. Zerbin, and C. Koldewey,
“Guidance on Dataspaces: Development of a Learning Environment for Industrial
SMEs,” presented at the 6th International Conference on Control and Robotics (ICCR),
Yokohama, Japan , 2025, doi: 10.1109/iccr64365.2024.10927580.'
mla: 'Lick, Jonas, et al. “Guidance on Dataspaces: Development of a Learning Environment
for Industrial SMEs.” 2024 6th International Conference on Control and Robotics
(ICCR), IEEE, 2025, doi:10.1109/iccr64365.2024.10927580.'
short: 'J. Lick, J. Lamarz, F. Dohmann, P.J. Kulkarni, J. Zerbin, C. Koldewey, in:
2024 6th International Conference on Control and Robotics (ICCR), IEEE, 2025.'
conference:
end_date: 2024-12-07
location: 'Yokohama, Japan '
name: 6th International Conference on Control and Robotics (ICCR)
start_date: 2024-12-05
date_created: 2026-03-18T07:13:35Z
date_updated: 2026-03-18T07:18:48Z
department:
- _id: '563'
doi: 10.1109/iccr64365.2024.10927580
language:
- iso: eng
publication: 2024 6th International Conference on Control and Robotics (ICCR)
publication_status: published
publisher: IEEE
quality_controlled: '1'
status: public
title: 'Guidance on Dataspaces: Development of a Learning Environment for Industrial
SMEs'
type: conference
user_id: '51711'
year: '2025'
...
---
_id: '64983'
author:
- first_name: Florian
full_name: Löhr, Florian
id: '68303'
last_name: Löhr
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: Benjamin
full_name: Klie, Benjamin
last_name: Klie
- first_name: Ulrich
full_name: Giese, Ulrich
last_name: Giese
citation:
ama: 'Löhr F, Moritzer E, Klie B, Giese U. Thermoset–Rubber 2K Composite Systems:
Material Combinations and Interfacial Reactions in a One-Step Injection Molding
Process. In: International Rubber Conference (IRC) 2025, Bangkok, BITEC; e-Abstract
Book. ; 2025:227–228.'
apa: 'Löhr, F., Moritzer, E., Klie, B., & Giese, U. (2025). Thermoset–Rubber
2K Composite Systems: Material Combinations and Interfacial Reactions in a One-Step
Injection Molding Process. In International Rubber Conference (IRC) 2025, Bangkok,
BITEC; e-abstract book (pp. 227–228).'
bibtex: '@inbook{Löhr_Moritzer_Klie_Giese_2025, title={Thermoset–Rubber 2K Composite
Systems: Material Combinations and Interfacial Reactions in a One-Step Injection
Molding Process}, booktitle={International Rubber Conference (IRC) 2025, Bangkok,
BITEC; e-abstract book}, author={Löhr, Florian and Moritzer, Elmar and Klie, Benjamin
and Giese, Ulrich}, year={2025}, pages={227–228} }'
chicago: 'Löhr, Florian, Elmar Moritzer, Benjamin Klie, and Ulrich Giese. “Thermoset–Rubber
2K Composite Systems: Material Combinations and Interfacial Reactions in a One-Step
Injection Molding Process.” In International Rubber Conference (IRC) 2025,
Bangkok, BITEC; e-Abstract Book, 227–228, 2025.'
ieee: 'F. Löhr, E. Moritzer, B. Klie, and U. Giese, “Thermoset–Rubber 2K Composite
Systems: Material Combinations and Interfacial Reactions in a One-Step Injection
Molding Process,” in International Rubber Conference (IRC) 2025, Bangkok, BITEC;
e-abstract book, 2025, pp. 227–228.'
mla: 'Löhr, Florian, et al. “Thermoset–Rubber 2K Composite Systems: Material Combinations
and Interfacial Reactions in a One-Step Injection Molding Process.” International
Rubber Conference (IRC) 2025, Bangkok, BITEC; e-Abstract Book, 2025, pp. 227–228.'
short: 'F. Löhr, E. Moritzer, B. Klie, U. Giese, in: International Rubber Conference
(IRC) 2025, Bangkok, BITEC; e-Abstract Book, 2025, pp. 227–228.'
conference:
name: International Rubber Conference IRC 2025
date_created: 2026-03-16T12:20:49Z
date_updated: 2026-03-18T09:07:10Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
keyword:
- BMC
- Duroplast
- Kautschuk
- Mehrkomponenten
- Spritzgießen
language:
- iso: eng
page: 227–228
publication: International Rubber Conference (IRC) 2025, Bangkok, BITEC; e-abstract
book
quality_controlled: '1'
status: public
title: 'Thermoset–Rubber 2K Composite Systems: Material Combinations and Interfacial
Reactions in a One-Step Injection Molding Process'
type: book_chapter
user_id: '59363'
year: '2025'
...
---
_id: '65007'
author:
- first_name: Felix
full_name: Knaup, Felix
id: '45124'
last_name: Knaup
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
citation:
ama: Knaup F, Schöppner V. Improvement of a numerical two-phase simulation model
for single-screw plasticizing extruders based on experimental investigations.
International Polymer Processing. Published online 2025. doi:10.1515/ipp-2025-0072
apa: Knaup, F., & Schöppner, V. (2025). Improvement of a numerical two-phase
simulation model for single-screw plasticizing extruders based on experimental
investigations. International Polymer Processing. https://doi.org/10.1515/ipp-2025-0072
bibtex: '@article{Knaup_Schöppner_2025, title={Improvement of a numerical two-phase
simulation model for single-screw plasticizing extruders based on experimental
investigations}, DOI={10.1515/ipp-2025-0072},
journal={International Polymer Processing}, author={Knaup, Felix and Schöppner,
Volker}, year={2025} }'
chicago: Knaup, Felix, and Volker Schöppner. “Improvement of a Numerical Two-Phase
Simulation Model for Single-Screw Plasticizing Extruders Based on Experimental
Investigations.” International Polymer Processing, 2025. https://doi.org/10.1515/ipp-2025-0072.
ieee: 'F. Knaup and V. Schöppner, “Improvement of a numerical two-phase simulation
model for single-screw plasticizing extruders based on experimental investigations,”
International Polymer Processing, 2025, doi: 10.1515/ipp-2025-0072.'
mla: Knaup, Felix, and Volker Schöppner. “Improvement of a Numerical Two-Phase Simulation
Model for Single-Screw Plasticizing Extruders Based on Experimental Investigations.”
International Polymer Processing, 2025, doi:10.1515/ipp-2025-0072.
short: F. Knaup, V. Schöppner, International Polymer Processing (2025).
date_created: 2026-03-16T14:23:34Z
date_updated: 2026-03-18T09:17:45Z
department:
- _id: '9'
- _id: '321'
- _id: '367'
doi: 10.1515/ipp-2025-0072
keyword:
- CFD simulation
- melting modeling
- melting process
- polymer extrusion
- single-screw extruder
language:
- iso: eng
publication: International Polymer Processing
quality_controlled: '1'
status: public
title: Improvement of a numerical two-phase simulation model for single-screw plasticizing
extruders based on experimental investigations
type: journal_article
user_id: '59363'
year: '2025'
...
---
_id: '65005'
author:
- first_name: Felix
full_name: Knaup, Felix
id: '45124'
last_name: Knaup
- first_name: Florian
full_name: Brüning, Florian
last_name: Brüning
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
citation:
ama: 'Knaup F, Brüning F, Schöppner V. Improving an Analytical Model of Melting
in Single Screw Extruders considering the Delay Zone Length. In: Annual Technical
Conference of the Society of Plastics Engineers (ANTEC 2025). ; 2025.'
apa: Knaup, F., Brüning, F., & Schöppner, V. (2025). Improving an Analytical
Model of Melting in Single Screw Extruders considering the Delay Zone Length.
Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2025).
bibtex: '@inproceedings{Knaup_Brüning_Schöppner_2025, title={Improving an Analytical
Model of Melting in Single Screw Extruders considering the Delay Zone Length},
booktitle={Annual Technical Conference of the Society of Plastics Engineers (ANTEC
2025)}, author={Knaup, Felix and Brüning, Florian and Schöppner, Volker}, year={2025}
}'
chicago: Knaup, Felix, Florian Brüning, and Volker Schöppner. “Improving an Analytical
Model of Melting in Single Screw Extruders Considering the Delay Zone Length.”
In Annual Technical Conference of the Society of Plastics Engineers (ANTEC
2025), 2025.
ieee: F. Knaup, F. Brüning, and V. Schöppner, “Improving an Analytical Model of
Melting in Single Screw Extruders considering the Delay Zone Length,” 2025.
mla: Knaup, Felix, et al. “Improving an Analytical Model of Melting in Single Screw
Extruders Considering the Delay Zone Length.” Annual Technical Conference of
the Society of Plastics Engineers (ANTEC 2025), 2025.
short: 'F. Knaup, F. Brüning, V. Schöppner, in: Annual Technical Conference of the
Society of Plastics Engineers (ANTEC 2025), 2025.'
date_created: 2026-03-16T14:23:34Z
date_updated: 2026-03-18T09:23:35Z
department:
- _id: '9'
- _id: '321'
- _id: '367'
keyword:
- Aufschmelzen
- Aufschmelzmodellierung
- delay zone
- extrusion
- melting modeling
language:
- iso: eng
publication: Annual Technical Conference of the Society of Plastics Engineers (ANTEC
2025)
quality_controlled: '1'
status: public
title: Improving an Analytical Model of Melting in Single Screw Extruders considering
the Delay Zone Length
type: conference
user_id: '59363'
year: '2025'
...
---
_id: '65000'
author:
- first_name: Felix Paul
full_name: Hanselle, Felix Paul
id: '62320'
last_name: Hanselle
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
- first_name: Florian
full_name: Brüning, Florian
id: '72920'
last_name: Brüning
citation:
ama: Hanselle FP, Schöppner V, Brüning F. Consideration of modeled pressure dependent
viscosity data in injection molding simulation. International Polymer Processing.
Published online 2025. doi:10.1515/ipp-2025-0074
apa: Hanselle, F. P., Schöppner, V., & Brüning, F. (2025). Consideration of
modeled pressure dependent viscosity data in injection molding simulation. International
Polymer Processing. https://doi.org/10.1515/ipp-2025-0074
bibtex: '@article{Hanselle_Schöppner_Brüning_2025, title={Consideration of modeled
pressure dependent viscosity data in injection molding simulation}, DOI={10.1515/ipp-2025-0074},
journal={International Polymer Processing}, author={Hanselle, Felix Paul and Schöppner,
Volker and Brüning, Florian}, year={2025} }'
chicago: Hanselle, Felix Paul, Volker Schöppner, and Florian Brüning. “Consideration
of Modeled Pressure Dependent Viscosity Data in Injection Molding Simulation.”
International Polymer Processing, 2025. https://doi.org/10.1515/ipp-2025-0074.
ieee: 'F. P. Hanselle, V. Schöppner, and F. Brüning, “Consideration of modeled pressure
dependent viscosity data in injection molding simulation,” International Polymer
Processing, 2025, doi: 10.1515/ipp-2025-0074.'
mla: Hanselle, Felix Paul, et al. “Consideration of Modeled Pressure Dependent Viscosity
Data in Injection Molding Simulation.” International Polymer Processing,
2025, doi:10.1515/ipp-2025-0074.
short: F.P. Hanselle, V. Schöppner, F. Brüning, International Polymer Processing
(2025).
date_created: 2026-03-16T14:23:33Z
date_updated: 2026-03-18T09:25:09Z
department:
- _id: '9'
- _id: '321'
- _id: '367'
doi: 10.1515/ipp-2025-0074
keyword:
- Druckabhängigkeit
- Rheologie
- Simulation
- Spritzgießen
- Viskosität
language:
- iso: eng
publication: International Polymer Processing
quality_controlled: '1'
status: public
title: Consideration of modeled pressure dependent viscosity data in injection molding
simulation
type: journal_article
user_id: '59363'
year: '2025'
...
---
_id: '65002'
author:
- first_name: Dennis
full_name: Kleinschmidt, Dennis
id: '40516'
last_name: Kleinschmidt
- first_name: Florian
full_name: Brüning, Florian
id: '72920'
last_name: Brüning
citation:
ama: Kleinschmidt D, Brüning F. Influence of pre-shearing on the rheological properties
of filled rubber compounds. KGK Kautschuk Gummi Kunststoffe. Published
online 2025.
apa: Kleinschmidt, D., & Brüning, F. (2025). Influence of pre-shearing on the
rheological properties of filled rubber compounds. KGK Kautschuk Gummi Kunststoffe.
bibtex: '@article{Kleinschmidt_Brüning_2025, title={Influence of pre-shearing on
the rheological properties of filled rubber compounds}, journal={KGK Kautschuk
Gummi Kunststoffe}, author={Kleinschmidt, Dennis and Brüning, Florian}, year={2025}
}'
chicago: Kleinschmidt, Dennis, and Florian Brüning. “Influence of Pre-Shearing on
the Rheological Properties of Filled Rubber Compounds.” KGK Kautschuk Gummi
Kunststoffe, 2025.
ieee: D. Kleinschmidt and F. Brüning, “Influence of pre-shearing on the rheological
properties of filled rubber compounds,” KGK Kautschuk Gummi Kunststoffe,
2025.
mla: Kleinschmidt, Dennis, and Florian Brüning. “Influence of Pre-Shearing on the
Rheological Properties of Filled Rubber Compounds.” KGK Kautschuk Gummi Kunststoffe,
2025.
short: D. Kleinschmidt, F. Brüning, KGK Kautschuk Gummi Kunststoffe (2025).
date_created: 2026-03-16T14:23:33Z
date_updated: 2026-03-18T09:28:22Z
department:
- _id: '9'
- _id: '321'
- _id: '367'
keyword:
- Rheologie
- Viskosität
- Wandgleiten
language:
- iso: eng
publication: KGK Kautschuk Gummi Kunststoffe
quality_controlled: '1'
status: public
title: Influence of pre-shearing on the rheological properties of filled rubber compounds
type: journal_article
user_id: '59363'
year: '2025'
...
---
_id: '65049'
abstract:
- lang: eng
text: The degradation of polypropylene (PP) through thermal and mechanical
stress, as well as the influence of oxygen, are unavoidable when processing on
a co-rotating twin-screw extruder. In previous studies, a mathematical model was
developed to predict the degradation while compounding on different twin-screw
extruder sizes. Additionally, the examination of filled PPs was conducted. To
this end, a range of operating parameters and extruder sizes were used to process
PP, and the molar mass was then determined by melt flow rate (MFR) and gel permeation
chromatography (GPC) measurements to derive the degree of degradation. The model
was then modified by adjusting the sensitivity parameters to allow the degradation
behavior of the PPs to be described independently of extruder size. Consistent
with prior research, comprehensive measurements of a PP/titanium dioxide (TiO2)
compound revealed that, with a few exceptions, increasing temperatures and screw
speeds and decreasing throughputs generally resulted in higher degradation. However,
the application of the model to the compounds did not achieve good agreement with
the measured degradation, indicating different degradation conditions due to the
different thermodynamic and rheological properties of the compounds.
article_number: '1509'
author:
- first_name: Paul
full_name: Albrecht, Paul
id: '90467'
last_name: Albrecht
- first_name: Matthias
full_name: Altepeter, Matthias
last_name: Altepeter
- first_name: Florian
full_name: Brüning, Florian
id: '72920'
last_name: Brüning
citation:
ama: Albrecht P, Altepeter M, Brüning F. Degradation of Polypropylene and Polypropylene
Compounds on Co-Rotating Twin-Screw Extruders. Polymers. 2025;17(11). doi:10.3390/polym17111509
apa: Albrecht, P., Altepeter, M., & Brüning, F. (2025). Degradation of Polypropylene
and Polypropylene Compounds on Co-Rotating Twin-Screw Extruders. Polymers,
17(11), Article 1509. https://doi.org/10.3390/polym17111509
bibtex: '@article{Albrecht_Altepeter_Brüning_2025, title={Degradation of Polypropylene
and Polypropylene Compounds on Co-Rotating Twin-Screw Extruders}, volume={17},
DOI={10.3390/polym17111509},
number={111509}, journal={Polymers}, publisher={MDPI AG}, author={Albrecht, Paul
and Altepeter, Matthias and Brüning, Florian}, year={2025} }'
chicago: Albrecht, Paul, Matthias Altepeter, and Florian Brüning. “Degradation of
Polypropylene and Polypropylene Compounds on Co-Rotating Twin-Screw Extruders.”
Polymers 17, no. 11 (2025). https://doi.org/10.3390/polym17111509.
ieee: 'P. Albrecht, M. Altepeter, and F. Brüning, “Degradation of Polypropylene
and Polypropylene Compounds on Co-Rotating Twin-Screw Extruders,” Polymers,
vol. 17, no. 11, Art. no. 1509, 2025, doi: 10.3390/polym17111509.'
mla: Albrecht, Paul, et al. “Degradation of Polypropylene and Polypropylene Compounds
on Co-Rotating Twin-Screw Extruders.” Polymers, vol. 17, no. 11, 1509,
MDPI AG, 2025, doi:10.3390/polym17111509.
short: P. Albrecht, M. Altepeter, F. Brüning, Polymers 17 (2025).
date_created: 2026-03-18T10:03:02Z
date_updated: 2026-03-18T10:08:31Z
doi: 10.3390/polym17111509
intvolume: ' 17'
issue: '11'
language:
- iso: eng
publication: Polymers
publication_identifier:
issn:
- 2073-4360
publication_status: published
publisher: MDPI AG
quality_controlled: '1'
status: public
title: Degradation of Polypropylene and Polypropylene Compounds on Co-Rotating Twin-Screw
Extruders
type: journal_article
user_id: '59363'
volume: 17
year: '2025'
...
---
_id: '63462'
author:
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: Finn
full_name: Bartmann, Finn
last_name: Bartmann
- first_name: Alexander
full_name: Riedl, Alexander
last_name: Riedl
citation:
ama: 'Moritzer E, Bartmann F, Riedl A. NUMERICAL AND EXPERIMENTAL CONSIDERATIONS
OF THE CREEP OF THERMOPLASTIC FLANGE SYSTEMS FOR THE DEVELOPMENT OF AN ANALYTICAL
CALCULATION METHOD. In: Proceedings of the ASME 2025 Pressure Vessels &
Piping Conference PVP2025. ; 2025.'
apa: Moritzer, E., Bartmann, F., & Riedl, A. (2025). NUMERICAL AND EXPERIMENTAL
CONSIDERATIONS OF THE CREEP OF THERMOPLASTIC FLANGE SYSTEMS FOR THE DEVELOPMENT
OF AN ANALYTICAL CALCULATION METHOD. Proceedings of the ASME 2025 Pressure
Vessels & Piping Conference PVP2025. Proceedings of the ASME 2025 Pressure
Vessels & Piping Conference PVP2025, Montreal, Quebec, Canada.
bibtex: '@inproceedings{Moritzer_Bartmann_Riedl_2025, title={NUMERICAL AND EXPERIMENTAL
CONSIDERATIONS OF THE CREEP OF THERMOPLASTIC FLANGE SYSTEMS FOR THE DEVELOPMENT
OF AN ANALYTICAL CALCULATION METHOD}, booktitle={Proceedings of the ASME 2025
Pressure Vessels & Piping Conference PVP2025}, author={Moritzer, Elmar and
Bartmann, Finn and Riedl, Alexander}, year={2025} }'
chicago: Moritzer, Elmar, Finn Bartmann, and Alexander Riedl. “NUMERICAL AND EXPERIMENTAL
CONSIDERATIONS OF THE CREEP OF THERMOPLASTIC FLANGE SYSTEMS FOR THE DEVELOPMENT
OF AN ANALYTICAL CALCULATION METHOD.” In Proceedings of the ASME 2025 Pressure
Vessels & Piping Conference PVP2025, 2025.
ieee: E. Moritzer, F. Bartmann, and A. Riedl, “NUMERICAL AND EXPERIMENTAL CONSIDERATIONS
OF THE CREEP OF THERMOPLASTIC FLANGE SYSTEMS FOR THE DEVELOPMENT OF AN ANALYTICAL
CALCULATION METHOD,” presented at the Proceedings of the ASME 2025 Pressure Vessels
& Piping Conference PVP2025, Montreal, Quebec, Canada, 2025.
mla: Moritzer, Elmar, et al. “NUMERICAL AND EXPERIMENTAL CONSIDERATIONS OF THE CREEP
OF THERMOPLASTIC FLANGE SYSTEMS FOR THE DEVELOPMENT OF AN ANALYTICAL CALCULATION
METHOD.” Proceedings of the ASME 2025 Pressure Vessels & Piping Conference
PVP2025, 2025.
short: 'E. Moritzer, F. Bartmann, A. Riedl, in: Proceedings of the ASME 2025 Pressure
Vessels & Piping Conference PVP2025, 2025.'
conference:
location: Montreal, Quebec, Canada
name: Proceedings of the ASME 2025 Pressure Vessels & Piping Conference PVP2025
date_created: 2026-01-05T11:39:02Z
date_updated: 2026-03-18T10:23:22Z
department:
- _id: '9'
- _id: '321'
- _id: '367'
language:
- iso: eng
publication: Proceedings of the ASME 2025 Pressure Vessels & Piping Conference PVP2025
quality_controlled: '1'
status: public
title: NUMERICAL AND EXPERIMENTAL CONSIDERATIONS OF THE CREEP OF THERMOPLASTIC FLANGE
SYSTEMS FOR THE DEVELOPMENT OF AN ANALYTICAL CALCULATION METHOD
type: conference
user_id: '59363'
year: '2025'
...
---
_id: '64772'
abstract:
- lang: eng
text: Der Beitrag präsentiert Ergebnisse eines Lehr- und Forschungsprojekts,
das den studentischen Umgang mit Literatur untersucht. Konkret wurden Studierende
gebeten, sich einen disziplinspezifischen Text mithilfe generativer KI zu erschließen.
Gefasst als Lehr-Lernpraktik, eröffnet die Analyse der Literaturarbeit Einblicke
in hochschulische Praktiken und deren Transformation. Der Zugang erweist sich
als erkenntnisreich, da er einerseits die zunehmende KI-Nutzung berücksichtigt,
andererseits – aufgrund der dialogischen Funktionsweise generativer KI – Einblicke
in die studentische Literaturarbeit ermöglicht. Zur Untersuchung der Praktiken
und deren Sinngehalt wurden Chatprotokolle in Anlehnung an konversationsanalytische
Verfahren ausgewertet, um studentische Handlungsmuster zu rekonstruieren. (DIPF/Orig.)
author:
- first_name: Marie-Ann
full_name: Kückmann, Marie-Ann
last_name: Kückmann
- first_name: Leonie
full_name: Schmid, Leonie
id: '57331'
last_name: Schmid
orcid: 0009-0005-8378-4385
citation:
ama: Kückmann M-A, Schmid L. Zum Umgang mit “Wahr-Scheinlichkeiten”. Lehr- und Forschungsprojekt
zur KI-gestützten Literaturarbeit. Journal für Allgemeine Didaktik JfAD Jg13/2025
Allgemeine Didaktik und Künstliche Intelligenu (KI). Published online 2025.
doi:10.35468/jfad-13-2025-03
apa: Kückmann, M.-A., & Schmid, L. (2025). Zum Umgang mit “Wahr-Scheinlichkeiten”.
Lehr- und Forschungsprojekt zur KI-gestützten Literaturarbeit. Journal für
Allgemeine Didaktik JfAD Jg.13/2025 Allgemeine Didaktik und Künstliche Intelligenu
(KI). https://doi.org/10.35468/jfad-13-2025-03
bibtex: '@article{Kückmann_Schmid_2025, title={Zum Umgang mit “Wahr-Scheinlichkeiten”.
Lehr- und Forschungsprojekt zur KI-gestützten Literaturarbeit}, DOI={10.35468/jfad-13-2025-03},
journal={Journal für Allgemeine Didaktik JfAD Jg.13/2025 Allgemeine Didaktik und
Künstliche Intelligenu (KI)}, publisher={Verlag Julius Klinkhardt}, author={Kückmann,
Marie-Ann and Schmid, Leonie}, year={2025} }'
chicago: Kückmann, Marie-Ann, and Leonie Schmid. “Zum Umgang mit ‘Wahr-Scheinlichkeiten’.
Lehr- und Forschungsprojekt zur KI-gestützten Literaturarbeit.” Journal für
Allgemeine Didaktik JfAD Jg.13/2025 Allgemeine Didaktik und Künstliche Intelligenu
(KI), 2025. https://doi.org/10.35468/jfad-13-2025-03.
ieee: 'M.-A. Kückmann and L. Schmid, “Zum Umgang mit ‘Wahr-Scheinlichkeiten’. Lehr-
und Forschungsprojekt zur KI-gestützten Literaturarbeit,” Journal für Allgemeine
Didaktik JfAD Jg.13/2025 Allgemeine Didaktik und Künstliche Intelligenu (KI),
2025, doi: 10.35468/jfad-13-2025-03.'
mla: Kückmann, Marie-Ann, and Leonie Schmid. “Zum Umgang mit ‘Wahr-Scheinlichkeiten’.
Lehr- und Forschungsprojekt zur KI-gestützten Literaturarbeit.” Journal für
Allgemeine Didaktik JfAD Jg.13/2025 Allgemeine Didaktik und Künstliche Intelligenu
(KI), Verlag Julius Klinkhardt, 2025, doi:10.35468/jfad-13-2025-03.
short: M.-A. Kückmann, L. Schmid, Journal für Allgemeine Didaktik JfAD Jg.13/2025
Allgemeine Didaktik und Künstliche Intelligenu (KI) (2025).
date_created: 2026-02-27T08:15:32Z
date_updated: 2026-03-19T09:10:59Z
doi: 10.35468/jfad-13-2025-03
language:
- iso: ger
publication: Journal für Allgemeine Didaktik JfAD Jg.13/2025 Allgemeine Didaktik und
Künstliche Intelligenu (KI)
publication_identifier:
isbn:
- '9783781527263'
publication_status: published
publisher: Verlag Julius Klinkhardt
quality_controlled: '1'
status: public
title: Zum Umgang mit "Wahr-Scheinlichkeiten". Lehr- und Forschungsprojekt zur KI-gestützten
Literaturarbeit
type: journal_article
user_id: '57331'
year: '2025'
...
---
_id: '62877'
author:
- first_name: Niklas
full_name: Sänger, Niklas
id: '49812'
last_name: Sänger
orcid: https://orcid.org/0009-0007-2292-9063
- first_name: Leonie
full_name: Schmid, Leonie
id: '57331'
last_name: Schmid
orcid: 0009-0005-8378-4385
- first_name: Tobias
full_name: Jenert, Tobias
id: '71994'
last_name: Jenert
orcid: ' https://orcid.org/0000-0001-9262-5646'
- first_name: H.-Hugo
full_name: Kremer, H.-Hugo
id: '15280'
last_name: Kremer
- first_name: Marie-Ann
full_name: Kückmann, Marie-Ann
id: '25394'
last_name: Kückmann
citation:
ama: 'Sänger N, Schmid L, Jenert T, Kremer H-H, Kückmann M-A. Evaluation von Entwicklungsarbeiten
zur modulübergreifenden Professionalisierung von Lehrkräften an Berufskollegs
im Kontext der digitalen Transformation. In: ; 2025.'
apa: Sänger, N., Schmid, L., Jenert, T., Kremer, H.-H., & Kückmann, M.-A. (2025).
Evaluation von Entwicklungsarbeiten zur modulübergreifenden Professionalisierung
von Lehrkräften an Berufskollegs im Kontext der digitalen Transformation.
Jahrestagung der Sektion Berufs- und Wirtschaftspädagogik der Deutschen Gesellschaft
für Erziehungswissenschaft, Darmstadt.
bibtex: '@inproceedings{Sänger_Schmid_Jenert_Kremer_Kückmann_2025, title={Evaluation
von Entwicklungsarbeiten zur modulübergreifenden Professionalisierung von Lehrkräften
an Berufskollegs im Kontext der digitalen Transformation}, author={Sänger, Niklas
and Schmid, Leonie and Jenert, Tobias and Kremer, H.-Hugo and Kückmann, Marie-Ann},
year={2025} }'
chicago: Sänger, Niklas, Leonie Schmid, Tobias Jenert, H.-Hugo Kremer, and Marie-Ann
Kückmann. “Evaluation von Entwicklungsarbeiten zur modulübergreifenden Professionalisierung
von Lehrkräften an Berufskollegs im Kontext der digitalen Transformation,” 2025.
ieee: N. Sänger, L. Schmid, T. Jenert, H.-H. Kremer, and M.-A. Kückmann, “Evaluation
von Entwicklungsarbeiten zur modulübergreifenden Professionalisierung von Lehrkräften
an Berufskollegs im Kontext der digitalen Transformation,” presented at the Jahrestagung
der Sektion Berufs- und Wirtschaftspädagogik der Deutschen Gesellschaft für Erziehungswissenschaft,
Darmstadt, 2025.
mla: Sänger, Niklas, et al. Evaluation von Entwicklungsarbeiten zur modulübergreifenden
Professionalisierung von Lehrkräften an Berufskollegs im Kontext der digitalen
Transformation. 2025.
short: 'N. Sänger, L. Schmid, T. Jenert, H.-H. Kremer, M.-A. Kückmann, in: 2025.'
conference:
end_date: 2025-09-26
location: Darmstadt
name: Jahrestagung der Sektion Berufs- und Wirtschaftspädagogik der Deutschen Gesellschaft
für Erziehungswissenschaft
start_date: 2025-09-24
date_created: 2025-12-04T13:26:01Z
date_updated: 2026-03-19T08:53:20Z
department:
- _id: '208'
- _id: '282'
- _id: '640'
language:
- iso: ger
project:
- _id: '865'
name: 'WÖRLD - Wirtschaftspädagogik und Ökonomische Bildung: Lehrkräftebildung und
Unterricht digital'
quality_controlled: '1'
status: public
title: Evaluation von Entwicklungsarbeiten zur modulübergreifenden Professionalisierung
von Lehrkräften an Berufskollegs im Kontext der digitalen Transformation
type: conference
user_id: '57331'
year: '2025'
...
---
_id: '63470'
author:
- first_name: Laura
full_name: Wiredu, Laura
id: '69559'
last_name: Wiredu
citation:
ama: Wiredu L. Who Bears the Costs of the UK Soft Drink Tax? An Empirical Study
of Medium-Term Effects. Junior Management Science. 2025;10(4):985-1008.
doi:10.582/jums/v10i4pp985-1008
apa: Wiredu, L. (2025). Who Bears the Costs of the UK Soft Drink Tax? An Empirical
Study of Medium-Term Effects. Junior Management Science, 10(4),
985–1008. https://doi.org/10.582/jums/v10i4pp985-1008
bibtex: '@article{Wiredu_2025, title={Who Bears the Costs of the UK Soft Drink Tax?
An Empirical Study of Medium-Term Effects}, volume={10}, DOI={10.582/jums/v10i4pp985-1008},
number={4}, journal={Junior Management Science}, author={Wiredu, Laura}, year={2025},
pages={985–1008} }'
chicago: 'Wiredu, Laura. “Who Bears the Costs of the UK Soft Drink Tax? An Empirical
Study of Medium-Term Effects.” Junior Management Science 10, no. 4 (2025):
985–1008. https://doi.org/10.582/jums/v10i4pp985-1008.'
ieee: 'L. Wiredu, “Who Bears the Costs of the UK Soft Drink Tax? An Empirical Study
of Medium-Term Effects,” Junior Management Science, vol. 10, no. 4, pp.
985–1008, 2025, doi: 10.582/jums/v10i4pp985-1008.'
mla: Wiredu, Laura. “Who Bears the Costs of the UK Soft Drink Tax? An Empirical
Study of Medium-Term Effects.” Junior Management Science, vol. 10, no.
4, 2025, pp. 985–1008, doi:10.582/jums/v10i4pp985-1008.
short: L. Wiredu, Junior Management Science 10 (2025) 985–1008.
date_created: 2026-01-05T13:40:30Z
date_updated: 2026-03-19T10:17:07Z
department:
- _id: '187'
doi: 10.582/jums/v10i4pp985-1008
intvolume: ' 10'
issue: '4'
language:
- iso: eng
page: 985-1008
publication: Junior Management Science
quality_controlled: '1'
status: public
title: Who Bears the Costs of the UK Soft Drink Tax? An Empirical Study of Medium-Term
Effects
type: journal_article
user_id: '96670'
volume: 10
year: '2025'
...
---
_id: '61107'
abstract:
- lang: eng
text: As global industries seek to reduce energy consumption and lower CO2
emissions, the need for sustainable, efficient maintenance processes in manufacturing
has become increasingly important. Traditional mold cleaning methods often require
complete tool disassembly, extended downtime, and heavy use of solvents, resulting
in high energy costs and environmental impact. This study presents a novel localized
ultrasonic cleaning process for injection molding tools that enables targeted,
in situ cleaning of mold cavities without removing the tool from the press. A
precisely positioned ultrasonic transducer delivers cleaning energy directly to
contaminated areas, eliminating the need for complete mold removal. Multiple cleaning
agents, including alkaline and organic acid solutions, were evaluated for their
effectiveness in combination with ultrasonic excitation. Surface roughness measurements
were used to assess cleaning performance over repeated contamination and cleaning
cycles. Although initial tests were performed manually in the lab, results indicate
that the method can be scaled up and automated effectively. This process offers
a promising path toward energy-efficient, low-emission tool maintenance across
a wide range of injection molding applications.
article_number: '354'
article_type: original
author:
- first_name: Deviprasad
full_name: Chalicheemalapalli Jayasankar, Deviprasad
id: '49504'
last_name: Chalicheemalapalli Jayasankar
orcid: https://orcid.org/ 0000-0002-3446-2444
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Thorsten
full_name: Marten, Thorsten
last_name: Marten
citation:
ama: 'Chalicheemalapalli Jayasankar D, Tröster T, Marten T. Localized Ultrasonic
Cleaning for Injection Mold Cavities: A Scalable In Situ Process with Surface
Quality Monitoring. Technologies. 2025;13(8). doi:10.3390/technologies13080354'
apa: 'Chalicheemalapalli Jayasankar, D., Tröster, T., & Marten, T. (2025). Localized
Ultrasonic Cleaning for Injection Mold Cavities: A Scalable In Situ Process with
Surface Quality Monitoring. Technologies, 13(8), Article 354. https://doi.org/10.3390/technologies13080354'
bibtex: '@article{Chalicheemalapalli Jayasankar_Tröster_Marten_2025, title={Localized
Ultrasonic Cleaning for Injection Mold Cavities: A Scalable In Situ Process with
Surface Quality Monitoring}, volume={13}, DOI={10.3390/technologies13080354},
number={8354}, journal={Technologies}, publisher={MDPI AG}, author={Chalicheemalapalli
Jayasankar, Deviprasad and Tröster, Thomas and Marten, Thorsten}, year={2025}
}'
chicago: 'Chalicheemalapalli Jayasankar, Deviprasad, Thomas Tröster, and Thorsten
Marten. “Localized Ultrasonic Cleaning for Injection Mold Cavities: A Scalable
In Situ Process with Surface Quality Monitoring.” Technologies 13, no.
8 (2025). https://doi.org/10.3390/technologies13080354.'
ieee: 'D. Chalicheemalapalli Jayasankar, T. Tröster, and T. Marten, “Localized Ultrasonic
Cleaning for Injection Mold Cavities: A Scalable In Situ Process with Surface
Quality Monitoring,” Technologies, vol. 13, no. 8, Art. no. 354, 2025,
doi: 10.3390/technologies13080354.'
mla: 'Chalicheemalapalli Jayasankar, Deviprasad, et al. “Localized Ultrasonic Cleaning
for Injection Mold Cavities: A Scalable In Situ Process with Surface Quality Monitoring.”
Technologies, vol. 13, no. 8, 354, MDPI AG, 2025, doi:10.3390/technologies13080354.'
short: D. Chalicheemalapalli Jayasankar, T. Tröster, T. Marten, Technologies 13
(2025).
date_created: 2025-09-01T09:03:42Z
date_updated: 2026-03-20T08:42:38Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.3390/technologies13080354
intvolume: ' 13'
issue: '8'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.mdpi.com/2227-7080/13/8/354
oa: '1'
publication: Technologies
publication_identifier:
issn:
- 2227-7080
publication_status: published
publisher: MDPI AG
quality_controlled: '1'
status: public
title: 'Localized Ultrasonic Cleaning for Injection Mold Cavities: A Scalable In Situ
Process with Surface Quality Monitoring'
type: journal_article
user_id: '49504'
volume: 13
year: '2025'
...