---
_id: '50649'
abstract:
- lang: eng
text: The energy turnaround and the shift towards sustainable mobility threaten
the stability of European energy distribution grids due to substantially increasing
load fluctuations and power demand. These challenges can critically impact assets
in the distribution grid—e.g., switchgears—intensifying the need to plan, conduct,
and manage the maintenance of such assets. Predictive maintenance strategies that
analyze assets' current and historical condition data have been discussed as promising
approaches toward that end. However, the extant research focuses on designing
and improving analytical algorithms or information technology (IT) artifacts while
not considering how a maintenance service is cocreated by companies with IT. This
research article posits that IT and service must be aligned closely, presenting
an ensemble artifact comprising a digital industrial platform and a smart service
system for predictive maintenance on the distribution grid. The artifact is evaluated
by conducting a willingness-to-pay analysis with asset operators, documenting
their demand for condition monitoring and predictive maintenance as an integrated
solution, although they still struggle with even getting the condition data of
their assets. Building on these results, we formalize the knowledge in the form
of design principles and implications for managing the maintenance of critical
assets in the distribution grid.
article_type: original
author:
- first_name: Philipp
full_name: zur Heiden, Philipp
id: '64394'
last_name: zur Heiden
- first_name: Jennifer
full_name: Priefer, Jennifer
id: '82872'
last_name: Priefer
- first_name: Daniel
full_name: Beverungen, Daniel
id: '59677'
last_name: Beverungen
citation:
ama: zur Heiden P, Priefer J, Beverungen D. Predictive Maintenance on the Energy
Distribution Grid—Design and Evaluation of a Digital Industrial Platform in the
Context of a Smart Service System. IEEE Transactions on Engineering Management.
2024;71:3641-3655. doi:10.1109/tem.2024.3352819
apa: zur Heiden, P., Priefer, J., & Beverungen, D. (2024). Predictive Maintenance
on the Energy Distribution Grid—Design and Evaluation of a Digital Industrial
Platform in the Context of a Smart Service System. IEEE Transactions on Engineering
Management, 71, 3641–3655. https://doi.org/10.1109/tem.2024.3352819
bibtex: '@article{zur Heiden_Priefer_Beverungen_2024, title={Predictive Maintenance
on the Energy Distribution Grid—Design and Evaluation of a Digital Industrial
Platform in the Context of a Smart Service System}, volume={71}, DOI={10.1109/tem.2024.3352819},
journal={IEEE Transactions on Engineering Management}, publisher={Institute of
Electrical and Electronics Engineers (IEEE)}, author={zur Heiden, Philipp and
Priefer, Jennifer and Beverungen, Daniel}, year={2024}, pages={3641–3655} }'
chicago: 'Heiden, Philipp zur, Jennifer Priefer, and Daniel Beverungen. “Predictive
Maintenance on the Energy Distribution Grid—Design and Evaluation of a Digital
Industrial Platform in the Context of a Smart Service System.” IEEE Transactions
on Engineering Management 71 (2024): 3641–55. https://doi.org/10.1109/tem.2024.3352819.'
ieee: 'P. zur Heiden, J. Priefer, and D. Beverungen, “Predictive Maintenance on
the Energy Distribution Grid—Design and Evaluation of a Digital Industrial Platform
in the Context of a Smart Service System,” IEEE Transactions on Engineering
Management, vol. 71, pp. 3641–3655, 2024, doi: 10.1109/tem.2024.3352819.'
mla: zur Heiden, Philipp, et al. “Predictive Maintenance on the Energy Distribution
Grid—Design and Evaluation of a Digital Industrial Platform in the Context of
a Smart Service System.” IEEE Transactions on Engineering Management, vol.
71, Institute of Electrical and Electronics Engineers (IEEE), 2024, pp. 3641–55,
doi:10.1109/tem.2024.3352819.
short: P. zur Heiden, J. Priefer, D. Beverungen, IEEE Transactions on Engineering
Management 71 (2024) 3641–3655.
date_created: 2024-01-19T11:47:56Z
date_updated: 2024-11-11T09:50:34Z
ddc:
- '620'
doi: 10.1109/tem.2024.3352819
file:
- access_level: closed
content_type: application/pdf
creator: dabe
date_created: 2024-04-18T12:26:27Z
date_updated: 2024-04-18T12:26:27Z
file_id: '53570'
file_name: Predictive_Maintenance_on_the_Energy_Distribution_GridDesign_and_Evaluation_of_a_Digital_Industrial_Platform_in_the_Context_of_a_Smart_Service_System.pdf
file_size: 4070804
relation: main_file
success: 1
file_date_updated: 2024-04-18T12:26:27Z
has_accepted_license: '1'
intvolume: ' 71'
keyword:
- Design science research
- digital platform
- distribution grid
- IS design
- predictive maintenance
- smart services
language:
- iso: eng
page: 3641-3655
project:
- _id: '651'
grant_number: 03E16012F
name: 'FLEMING: FLEMING - Flexible Monitoring- und Regelsysteme für die Energie-
und Mobilitätswende im Verteilnetz durch Einsatz von Künstlicher Intelligenz'
publication: IEEE Transactions on Engineering Management
publication_identifier:
issn:
- 0018-9391
- 1558-0040
publication_status: published
publisher: Institute of Electrical and Electronics Engineers (IEEE)
quality_controlled: '1'
status: public
title: Predictive Maintenance on the Energy Distribution Grid—Design and Evaluation
of a Digital Industrial Platform in the Context of a Smart Service System
type: journal_article
user_id: '82872'
volume: 71
year: '2024'
...
---
_id: '57300'
abstract:
- lang: eng
text: Engineering methodologies for Cyber-Physical Systems (CPS) call for planning
simulations and physical testing in early phases of product creation. Even in
Model-Based Systems Engineering, there is a lack of systematic support that results
in avoidable costs and iterations in the engineering process. Planning test cases
and test scenarios along the product engineering process is not sufficiently integrated
in terms of support especially for verification and validation engineers. Based
on a systematic literature review, concepts for model-based planning of testing
are developed. Characteristics of test cases and test scenarios of CPS are systematically
identified. Generic templates for the creation of test cases and scenarios are
derived. Based on the templates, a System Modeling Language (SysML) profile extension
is developed which enables intuitive modelling of test cases and scenarios. The
SysML profile is evaluated in a sample System-of-Systems in Disaster Response.
It subsumes various types of sensor systems like rescue robotics, data science
algorithms and visualization technologies like Augmented Reality to support decisions
in extreme weather events. The templates and SysML profile significantly add value
for engineers in the early and systematic planning of verification and validation.
author:
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: Marcel
full_name: Ebel, Marcel
id: '81788'
last_name: Ebel
orcid: https://orcid.org/0009-0007-5400-4436
- first_name: Jens
full_name: Pottebaum, Jens
id: '405'
last_name: Pottebaum
orcid: http://orcid.org/0000-0001-8778-2989
citation:
ama: 'Gräßler I, Ebel M, Pottebaum J. Model-based planning of test cases and test
scenarios to support engineering of Cyber-Physical Systems. In: 2024 IEEE International
Symposium on Systems Engineering (ISSE). IEEE; 2024. doi:10.1109/isse63315.2024.10741135'
apa: Gräßler, I., Ebel, M., & Pottebaum, J. (2024). Model-based planning of
test cases and test scenarios to support engineering of Cyber-Physical Systems.
2024 IEEE International Symposium on Systems Engineering (ISSE). IEEE
International Symposium on Systems Engineering 2024, Perugia. https://doi.org/10.1109/isse63315.2024.10741135
bibtex: '@inproceedings{Gräßler_Ebel_Pottebaum_2024, title={Model-based planning
of test cases and test scenarios to support engineering of Cyber-Physical Systems},
DOI={10.1109/isse63315.2024.10741135},
booktitle={2024 IEEE International Symposium on Systems Engineering (ISSE)}, publisher={IEEE},
author={Gräßler, Iris and Ebel, Marcel and Pottebaum, Jens}, year={2024} }'
chicago: Gräßler, Iris, Marcel Ebel, and Jens Pottebaum. “Model-Based Planning of
Test Cases and Test Scenarios to Support Engineering of Cyber-Physical Systems.”
In 2024 IEEE International Symposium on Systems Engineering (ISSE). IEEE,
2024. https://doi.org/10.1109/isse63315.2024.10741135.
ieee: 'I. Gräßler, M. Ebel, and J. Pottebaum, “Model-based planning of test cases
and test scenarios to support engineering of Cyber-Physical Systems,” presented
at the IEEE International Symposium on Systems Engineering 2024, Perugia, 2024,
doi: 10.1109/isse63315.2024.10741135.'
mla: Gräßler, Iris, et al. “Model-Based Planning of Test Cases and Test Scenarios
to Support Engineering of Cyber-Physical Systems.” 2024 IEEE International
Symposium on Systems Engineering (ISSE), IEEE, 2024, doi:10.1109/isse63315.2024.10741135.
short: 'I. Gräßler, M. Ebel, J. Pottebaum, in: 2024 IEEE International Symposium
on Systems Engineering (ISSE), IEEE, 2024.'
conference:
end_date: 2024-10-18
location: Perugia
name: ' IEEE International Symposium on Systems Engineering 2024'
start_date: 2024-10-16
date_created: 2024-11-20T20:06:22Z
date_updated: 2025-01-17T16:20:14Z
department:
- _id: '152'
doi: 10.1109/isse63315.2024.10741135
has_accepted_license: '1'
keyword:
- Systems Engineering
- Systems verification
- System testing
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=10741135&tag=1
oa: '1'
project:
- _id: '516'
grant_number: '101092749'
name: 'CREXDATA: CREXDATA: Kritische Maßnahmenplanung über extreme Datenmengen'
publication: 2024 IEEE International Symposium on Systems Engineering (ISSE)
publication_status: published
publisher: IEEE
quality_controlled: '1'
status: public
title: Model-based planning of test cases and test scenarios to support engineering
of Cyber-Physical Systems
type: conference
user_id: '405'
year: '2024'
...
---
_id: '58310'
article_type: original
author:
- first_name: Jarmila
full_name: Mildorf, Jarmila
id: '356'
last_name: Mildorf
citation:
ama: 'Mildorf J. Auch Ärzte erzählen Geschichten: Medizinisches Wissen und Narration
in Blogs und Podcasts. Re:visit: Humanities and Medicine in Dialogue. 2024;3(1):9-27.'
apa: 'Mildorf, J. (2024). Auch Ärzte erzählen Geschichten: Medizinisches Wissen
und Narration in Blogs und Podcasts. Re:visit: Humanities and Medicine in Dialogue,
3(1), 9–27.'
bibtex: '@article{Mildorf_2024, title={Auch Ärzte erzählen Geschichten: Medizinisches
Wissen und Narration in Blogs und Podcasts}, volume={3}, number={1}, journal={Re:visit:
Humanities and Medicine in Dialogue}, author={Mildorf, Jarmila}, year={2024},
pages={9–27} }'
chicago: 'Mildorf, Jarmila. “Auch Ärzte erzählen Geschichten: Medizinisches Wissen
und Narration in Blogs und Podcasts.” Re:visit: Humanities and Medicine in
Dialogue 3, no. 1 (2024): 9–27.'
ieee: 'J. Mildorf, “Auch Ärzte erzählen Geschichten: Medizinisches Wissen und Narration
in Blogs und Podcasts,” Re:visit: Humanities and Medicine in Dialogue,
vol. 3, no. 1, pp. 9–27, 2024.'
mla: 'Mildorf, Jarmila. “Auch Ärzte erzählen Geschichten: Medizinisches Wissen und
Narration in Blogs und Podcasts.” Re:visit: Humanities and Medicine in Dialogue,
vol. 3, no. 1, 2024, pp. 9–27.'
short: 'J. Mildorf, Re:visit: Humanities and Medicine in Dialogue 3 (2024) 9–27.'
date_created: 2025-01-22T08:51:21Z
date_updated: 2025-01-22T08:58:52Z
department:
- _id: '1'
intvolume: ' 3'
issue: '1'
language:
- iso: ger
main_file_link:
- open_access: '1'
url: https://journal-revisit.org/jr/article/view/78
oa: '1'
page: 9-27
publication: 'Re:visit: Humanities and Medicine in Dialogue'
publication_identifier:
eissn:
- 2960-4222
publication_status: published
quality_controlled: '1'
status: public
title: 'Auch Ärzte erzählen Geschichten: Medizinisches Wissen und Narration in Blogs
und Podcasts'
type: journal_article
user_id: '356'
volume: 3
year: '2024'
...
---
_id: '58066'
abstract:
- lang: ger
text: Der Beitrag untersucht den Einsatz von Fachkräften für das Multiprofessionelle
Team im Gemeinsamen Lernen (MPT). Diese meist sozialpädagogisch ausgebildeten
Fachkräfte sind dezidiert für die Unterstützung der Inklusion an Grund-, Sekundar-und
Gesamtschulen angestellt. Erste Befunde (Grüter et al.,2022) und ministeriale
Aufgabenbeschreibung (Ministerium für Schule und Bildung des Landes Nordrhein-Westfalen
[MSB NRW], 2022) deuten auf ein offenes, wenig definiertes Tätigkeitsspektrum
hin. Mögliche Aufgabengebiete der MPT überschneiden sich mit denen der (sonderpädagogischen) Lehrkräfte,
der Schulsozialarbeiter*innen und –im Hinblick auf die Unterstützung im Unterricht
ohne Unterrichtsverantwortung –mit denen der Schulbegleitungen (Lübeck, 2019).Die
Überlappungen legen nahe, dass auch für die MPT das „Zuständigkeitsdiffusitätsproblem“
(Kunze 2016, S.265) gilt und die multiprofessionelle Teamarbeit entsprechend beeinflusst.
Da es bislang keine Daten darüber gibt, wie sich die Berufsrolle von MPT-Kräften
in der Breite ausgestaltet, eruiert der Beitrag in einer quantitativen Studie
ebendiese Frage. Zusätzlich werden die Fragenfokussiert, über welche Qualifikationen
und Vorerfahrungen MPT-Kräfte verfügen und mit welchen Akteur*innen MPT-Kräfte
in welcher Form kooperieren. Die Untersuchung bezieht sich auf den Einsatz von
MPT an Gesamt-und Sekundarschulen in NRW. Insgesamt wurden 109 MPT-Kräfte in Form
eines Online-Fragebogens befragt. Anhand der Ergebnisse konnte ein breites Einsatzgebiet
mit vereinzelten Aufgabenschwerpunkten (v.a. im Bereich der sonderpädagogisch
orientierten Kleingruppenförderung) der MPT-Kräfteidentifiziert werden. Schnittmengen
zu Aufgabenschwerpunkten anderer Berufsgruppen werden unter Berücksichtigung der
multiprofessionellen Kooperation hinsichtlich der Frage diskutiert, ob der Einsatz
von MPT-Kräften inklusive Zielstellungen eher befördert oder im Sinne einer Deprofessionalisierung
sonderpädagogischer Förderung eher entgegensteht.
article_type: original
author:
- first_name: Sarah
full_name: Meusel, Sarah
id: '56091'
last_name: Meusel
- first_name: Lukas
full_name: Müller, Lukas
id: '83570'
last_name: Müller
- first_name: Jonitta
full_name: Jesuthasan, Jonitta
id: '94539'
last_name: Jesuthasan
citation:
ama: Meusel S, Müller L, Jesuthasan J. Bestimmt unbestimmt? - Eine quantitativ-explorative
Studie zu Aufgabenprofilen von Fachkräften für das Multiprofessionelle Team (MPT)
an inklusiven Gesamt-und Sekundarschulen in NRW. Zeitschrift für Inklusion.
2024;(5).
apa: Meusel, S., Müller, L., & Jesuthasan, J. (2024). Bestimmt unbestimmt? -
Eine quantitativ-explorative Studie zu Aufgabenprofilen von Fachkräften für das
Multiprofessionelle Team (MPT) an inklusiven Gesamt-und Sekundarschulen in NRW.
Zeitschrift für Inklusion, 5.
bibtex: '@article{Meusel_Müller_Jesuthasan_2024, title={Bestimmt unbestimmt? - Eine
quantitativ-explorative Studie zu Aufgabenprofilen von Fachkräften für das Multiprofessionelle
Team (MPT) an inklusiven Gesamt-und Sekundarschulen in NRW.}, number={5}, journal={Zeitschrift
für Inklusion}, author={Meusel, Sarah and Müller, Lukas and Jesuthasan, Jonitta},
year={2024} }'
chicago: Meusel, Sarah, Lukas Müller, and Jonitta Jesuthasan. “Bestimmt unbestimmt?
- Eine quantitativ-explorative Studie zu Aufgabenprofilen von Fachkräften für
das Multiprofessionelle Team (MPT) an inklusiven Gesamt-und Sekundarschulen in
NRW.” Zeitschrift für Inklusion, no. 5 (2024).
ieee: S. Meusel, L. Müller, and J. Jesuthasan, “Bestimmt unbestimmt? - Eine quantitativ-explorative
Studie zu Aufgabenprofilen von Fachkräften für das Multiprofessionelle Team (MPT)
an inklusiven Gesamt-und Sekundarschulen in NRW.,” Zeitschrift für Inklusion,
no. 5, 2024.
mla: Meusel, Sarah, et al. “Bestimmt unbestimmt? - Eine quantitativ-explorative
Studie zu Aufgabenprofilen von Fachkräften für das Multiprofessionelle Team (MPT)
an inklusiven Gesamt-und Sekundarschulen in NRW.” Zeitschrift für Inklusion,
no. 5, 2024.
short: S. Meusel, L. Müller, J. Jesuthasan, Zeitschrift für Inklusion (2024).
date_created: 2025-01-07T10:15:03Z
date_updated: 2025-01-23T17:13:11Z
department:
- _id: '450'
issue: '5'
keyword:
- Deprofessionalisierung
- Kooperation
- Fachkräfte für das Multiprofessionelle Team(MPT)
- Aufgabenprofile in der inklusiven Schule
language:
- iso: ger
main_file_link:
- open_access: '1'
url: https://www.inklusion-online.net/index.php/inklusion-online/article/view/816
oa: '1'
publication: Zeitschrift für Inklusion
publication_status: published
quality_controlled: '1'
status: public
title: Bestimmt unbestimmt? - Eine quantitativ-explorative Studie zu Aufgabenprofilen
von Fachkräften für das Multiprofessionelle Team (MPT) an inklusiven Gesamt-und
Sekundarschulen in NRW.
type: journal_article
user_id: '56091'
year: '2024'
...
---
_id: '58348'
abstract:
- lang: eng
text: ' Clinching is a mechanical joining technology, in which a mainly
form-fit joint is created by means of local cold forming. To characterize the
load-bearing behavior of such joints, they are typically analyzed destructively,
for example by tensile-shear tests in combination with metallographic sections.
However, both the initiation and progress of failure can only be described to
a limited extent by this method. Furthermore, these tests allow only limited conclusions
about clinch points under in-service loading. More purposefully, clinch points
can be analyzed nondestructively by combining in-situ computed tomography (CT)
and transient dynamic analysis (TDA). The TDA continuously measures the dynamic
behavior of the specimen and indicates failure events like crack initiation, which
then can be evaluated thoroughly by stopping the test and performing a CT scan.
To qualify the TDA for this task, it is necessary to link the observed damage
behavior with specific dynamic characteristics. In this work, the complementation
of in-situ CT and TDA is investigated by testing a clinched single-lap tensile-shear
specimen made of aluminum. The testing procedure is stepwise: at certain displacement
levels, the specimen is investigated by in-situ CT and TDA. While the in-situ
CT provides the location, extent, and development of the failure phenomena, the
TDA uses this information to evaluate the dynamic signal and detect relevant frequency
ranges, which indicate damage events. The results demonstrate, that failure initiation
and progression can be analyzed efficiently by combining both measuring systems.
The TDA reliably detects relevant signal changes in the monitored frequency band.
By means of in-situ computed tomography, the corresponding failure phenomena can
be described in detail, enhancing the understanding of the load-bearing and deformation
behavior of clinch points. The concatenation of characteristic signal changes
and observed failure phenomena can henceforth be transferred to analyze complex
structures during operation nondestructively by TDA. '
article_type: original
author:
- first_name: Gregor
full_name: Reschke, Gregor
last_name: Reschke
- first_name: Daniel
full_name: Köhler, Daniel
last_name: Köhler
- first_name: Robert
full_name: Kupfer, Robert
last_name: Kupfer
- first_name: Juliane
full_name: Troschitz, Juliane
last_name: Troschitz
- first_name: Maik
full_name: Gude, Maik
last_name: Gude
- first_name: Alexander
full_name: Brosius, Alexander
last_name: Brosius
citation:
ama: 'Reschke G, Köhler D, Kupfer R, Troschitz J, Gude M, Brosius A. In-situ computed
tomography and transient dynamic analysis – failure analysis of a single-lap tensile-shear
test with clinch points. Proceedings of the Institution of Mechanical Engineers,
Part E: Journal of Process Mechanical Engineering. Published online 2024.
doi:10.1177/09544089241251646'
apa: 'Reschke, G., Köhler, D., Kupfer, R., Troschitz, J., Gude, M., & Brosius,
A. (2024). In-situ computed tomography and transient dynamic analysis – failure
analysis of a single-lap tensile-shear test with clinch points. Proceedings
of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical
Engineering. https://doi.org/10.1177/09544089241251646'
bibtex: '@article{Reschke_Köhler_Kupfer_Troschitz_Gude_Brosius_2024, title={In-situ
computed tomography and transient dynamic analysis – failure analysis of a single-lap
tensile-shear test with clinch points}, DOI={10.1177/09544089241251646},
journal={Proceedings of the Institution of Mechanical Engineers, Part E: Journal
of Process Mechanical Engineering}, publisher={SAGE Publications}, author={Reschke,
Gregor and Köhler, Daniel and Kupfer, Robert and Troschitz, Juliane and Gude,
Maik and Brosius, Alexander}, year={2024} }'
chicago: 'Reschke, Gregor, Daniel Köhler, Robert Kupfer, Juliane Troschitz, Maik
Gude, and Alexander Brosius. “In-Situ Computed Tomography and Transient Dynamic
Analysis – Failure Analysis of a Single-Lap Tensile-Shear Test with Clinch Points.”
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of
Process Mechanical Engineering, 2024. https://doi.org/10.1177/09544089241251646.'
ieee: 'G. Reschke, D. Köhler, R. Kupfer, J. Troschitz, M. Gude, and A. Brosius,
“In-situ computed tomography and transient dynamic analysis – failure analysis
of a single-lap tensile-shear test with clinch points,” Proceedings of the
Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering,
2024, doi: 10.1177/09544089241251646.'
mla: 'Reschke, Gregor, et al. “In-Situ Computed Tomography and Transient Dynamic
Analysis – Failure Analysis of a Single-Lap Tensile-Shear Test with Clinch Points.”
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of
Process Mechanical Engineering, SAGE Publications, 2024, doi:10.1177/09544089241251646.'
short: 'G. Reschke, D. Köhler, R. Kupfer, J. Troschitz, M. Gude, A. Brosius, Proceedings
of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical
Engineering (2024).'
date_created: 2025-01-23T19:21:45Z
date_updated: 2025-01-23T19:32:03Z
department:
- _id: '43'
- _id: '157'
doi: 10.1177/09544089241251646
keyword:
- Clinching
- Non-destructive testing
- Transient Dynamic Analysis
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
project:
- _id: '133'
name: 'TRR 285 - C: TRR 285 - Project Area C'
- _id: '148'
name: 'TRR 285 – C04: TRR 285 - Subproject C04'
publication: 'Proceedings of the Institution of Mechanical Engineers, Part E: Journal
of Process Mechanical Engineering'
publication_identifier:
issn:
- 0954-4089
- 2041-3009
publication_status: published
publisher: SAGE Publications
quality_controlled: '1'
status: public
title: In-situ computed tomography and transient dynamic analysis – failure analysis
of a single-lap tensile-shear test with clinch points
type: journal_article
user_id: '98812'
year: '2024'
...
---
_id: '58108'
abstract:
- lang: ger
text: "Der Schulalltag in den Praxisphasen der Lehrkräftebildung kann für angehende
Lehrkräfte aufgrund der vielfältigen und herausfordernden Handlungssituationen
stark emotionsgeladen sein. Der Umgang mit Emotionen in den verschiedenen beruflichen
und privatberuflichen Situationen ist besonders für angehende Lehrkräfte von Bedeutung,
da fehlende Kompetenzen im Bereich der Emotionsregulation zu negativen Folgen
führen können. Privatberufliche Situationen beschreiben berufliche Situationen
wie die Unterrichtsvorbereitung, die mit dem Lehrberuf verbunden sind, sich jedoch
außerhalb des regulären Arbeitsumfelds ereignen. In diesem Beitrag wird zunächst
eine Tagebuchstudie mit Praxissemesterstudierenden (n = 10) und daraufhin eine
Experience-Sampling-Studie im Vorbereitungsdienst mit Lehramtsanwärter*innen (n
= 13) vorgestellt. Beide Studien untersuchten berufliche und privatberufliche
Situationen, erlebte Emotionen und angewendete Emotionsregulationsstrategien von
angehenden Lehrkräften. Im Praxissemester wurden 126 und im Vorbereitungsdienst
387 emotionsauslösende Situationen des (Berufs-)Alltags genannt. In beiden\r\nStudien
erlebten die angehenden Lehrkräfte mehr positive als negative Emotionen. Bezüglich
der Anwendung von Emotionsregulationsstrategien gaben beide Untersuchungsgruppen
an, in den meisten Fällen die Emotion frei auszudrücken."
article_type: original
author:
- first_name: Alexander
full_name: Will, Alexander
id: '38528'
last_name: Will
citation:
ama: 'Will A. Emotionales Erleben und Emotionsregulation von angehenden Lehrkräften:
Befunde zweier Studien im Praxissemester und Vorbereitungsdienst. Lehrerbildung
auf dem Prüfstand (LbP). 2024;1(17):104-126. doi:10.62350/HCKE8938'
apa: 'Will, A. (2024). Emotionales Erleben und Emotionsregulation von angehenden
Lehrkräften: Befunde zweier Studien im Praxissemester und Vorbereitungsdienst.
Lehrerbildung auf dem Prüfstand (LbP), 1(17), 104–126. https://doi.org/10.62350/HCKE8938'
bibtex: '@article{Will_2024, title={Emotionales Erleben und Emotionsregulation von
angehenden Lehrkräften: Befunde zweier Studien im Praxissemester und Vorbereitungsdienst},
volume={1}, DOI={10.62350/HCKE8938},
number={17}, journal={Lehrerbildung auf dem Prüfstand (LbP)}, author={Will, Alexander},
year={2024}, pages={104–126} }'
chicago: 'Will, Alexander. “Emotionales Erleben und Emotionsregulation von angehenden
Lehrkräften: Befunde zweier Studien im Praxissemester und Vorbereitungsdienst.”
Lehrerbildung auf dem Prüfstand (LbP) 1, no. 17 (2024): 104–26. https://doi.org/10.62350/HCKE8938.'
ieee: 'A. Will, “Emotionales Erleben und Emotionsregulation von angehenden Lehrkräften:
Befunde zweier Studien im Praxissemester und Vorbereitungsdienst,” Lehrerbildung
auf dem Prüfstand (LbP), vol. 1, no. 17, pp. 104–126, 2024, doi: 10.62350/HCKE8938.'
mla: 'Will, Alexander. “Emotionales Erleben und Emotionsregulation von angehenden
Lehrkräften: Befunde zweier Studien im Praxissemester und Vorbereitungsdienst.”
Lehrerbildung auf dem Prüfstand (LbP), vol. 1, no. 17, 2024, pp. 104–26,
doi:10.62350/HCKE8938.'
short: A. Will, Lehrerbildung auf dem Prüfstand (LbP) 1 (2024) 104–126.
date_created: 2025-01-08T10:07:47Z
date_updated: 2025-01-28T08:34:26Z
department:
- _id: '208'
doi: 10.62350/HCKE8938
intvolume: ' 1'
issue: '17'
keyword:
- Emotionen – Emotionsregulation – Lehrkräftebildung
language:
- iso: ger
page: 104-126
publication: Lehrerbildung auf dem Prüfstand (LbP)
publication_status: published
quality_controlled: '1'
status: public
title: 'Emotionales Erleben und Emotionsregulation von angehenden Lehrkräften: Befunde
zweier Studien im Praxissemester und Vorbereitungsdienst'
type: journal_article
user_id: '38528'
volume: 1
year: '2024'
...
---
_id: '58384'
abstract:
- lang: eng
text: Abstract. Structures made of aluminum die casting are being used in
increasing quantities as well as component sizes for various applications. Due
to the size of the components, heat treatment of the cast parts following the
casting process is omitted in order to meet dimensional accuracy requirements
and reduce production costs. From such an approach, challenges arise with regard
to the mechanical joining of these aluminum die-cast structures. On one hand,
the absence of heat treatment results in a general decrease in ductility. On the
other hand, the increasing size of the components introduces process-related tolerances
regarding the quality of the casting, including the presence of air or gas inclusions,
and significant variations in ductility within the component. These factors present
challenges for mechanical joining technologies, such as the potential risk of
crack-related defects during the joining process. For the robust mechanical joining
of such materials, the development and validation of suitable joining strategies
for aluminum die cast components is presented in this paper. A preparatory step
involving localized heat treatment in the joining area is implemented to enhance
the suitability of the casting material for mechanical joining. The objective
is to generate an improved ductility state in the aluminum die casting material,
enabling crack-free joining through self-pierce riveting. Additionally, the formability
of the aluminum die casting material is characterized using a specially developed
ductility testing method. This allows the prediction of potential crack-related
defects during mechanical joining. The methods described are developed using the
AlSi10MnMg material in its as-cast state and applied to the self-pierce riveting
process.
author:
- first_name: Christian
full_name: Kraus, Christian
last_name: Kraus
- first_name: Max
full_name: Böhnke, Max
id: '45779'
last_name: Böhnke
- first_name: Welf-Guntram
full_name: Drossel, Welf-Guntram
last_name: Drossel
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Kraus C, Böhnke M, Drossel W-G, Meschut G. Development of new strategies for
the mechanical joining of components made of aluminum die casting. In: Materials
Research Proceedings. Vol 41. Materials Research Forum LLC; 2024. doi:10.21741/9781644903131-190'
apa: Kraus, C., Böhnke, M., Drossel, W.-G., & Meschut, G. (2024). Development
of new strategies for the mechanical joining of components made of aluminum die
casting. Materials Research Proceedings, 41. https://doi.org/10.21741/9781644903131-190
bibtex: '@inproceedings{Kraus_Böhnke_Drossel_Meschut_2024, title={Development of
new strategies for the mechanical joining of components made of aluminum die casting},
volume={41}, DOI={10.21741/9781644903131-190},
booktitle={Materials Research Proceedings}, publisher={Materials Research Forum
LLC}, author={Kraus, Christian and Böhnke, Max and Drossel, Welf-Guntram and Meschut,
Gerson}, year={2024} }'
chicago: Kraus, Christian, Max Böhnke, Welf-Guntram Drossel, and Gerson Meschut.
“Development of New Strategies for the Mechanical Joining of Components Made of
Aluminum Die Casting.” In Materials Research Proceedings, Vol. 41. Materials
Research Forum LLC, 2024. https://doi.org/10.21741/9781644903131-190.
ieee: 'C. Kraus, M. Böhnke, W.-G. Drossel, and G. Meschut, “Development of new strategies
for the mechanical joining of components made of aluminum die casting,” in Materials
Research Proceedings, Toulouse, 2024, vol. 41, doi: 10.21741/9781644903131-190.'
mla: Kraus, Christian, et al. “Development of New Strategies for the Mechanical
Joining of Components Made of Aluminum Die Casting.” Materials Research Proceedings,
vol. 41, Materials Research Forum LLC, 2024, doi:10.21741/9781644903131-190.
short: 'C. Kraus, M. Böhnke, W.-G. Drossel, G. Meschut, in: Materials Research Proceedings,
Materials Research Forum LLC, 2024.'
conference:
location: Toulouse
name: ESAFORM2024
date_created: 2025-01-28T08:57:46Z
date_updated: 2025-01-28T09:04:30Z
doi: 10.21741/9781644903131-190
intvolume: ' 41'
language:
- iso: eng
publication: Materials Research Proceedings
publication_identifier:
issn:
- 2474-395X
publication_status: published
publisher: Materials Research Forum LLC
quality_controlled: '1'
status: public
title: Development of new strategies for the mechanical joining of components made
of aluminum die casting
type: conference
user_id: '45779'
volume: 41
year: '2024'
...
---
_id: '57742'
article_type: original
author:
- first_name: Max
full_name: Böhnke, Max
id: '45779'
last_name: Böhnke
- first_name: Christian Roman
full_name: Bielak, Christian Roman
id: '34782'
last_name: Bielak
- first_name: Robert
full_name: Beck, Robert
id: '38279'
last_name: Beck
orcid: 0000-0001-9056-4528
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: Böhnke M, Bielak CR, Beck R, Bobbert M, Meschut G. Development of a friction
model for the numerical simulation of clinching processes. Friction. Published
online 2024. doi:10.26599/frict.2025.9441052
apa: Böhnke, M., Bielak, C. R., Beck, R., Bobbert, M., & Meschut, G. (2024).
Development of a friction model for the numerical simulation of clinching processes.
Friction. https://doi.org/10.26599/frict.2025.9441052
bibtex: '@article{Böhnke_Bielak_Beck_Bobbert_Meschut_2024, title={Development of
a friction model for the numerical simulation of clinching processes}, DOI={10.26599/frict.2025.9441052},
journal={Friction}, publisher={Tsinghua University Press}, author={Böhnke, Max
and Bielak, Christian Roman and Beck, Robert and Bobbert, Mathias and Meschut,
Gerson}, year={2024} }'
chicago: Böhnke, Max, Christian Roman Bielak, Robert Beck, Mathias Bobbert, and
Gerson Meschut. “Development of a Friction Model for the Numerical Simulation
of Clinching Processes.” Friction, 2024. https://doi.org/10.26599/frict.2025.9441052.
ieee: 'M. Böhnke, C. R. Bielak, R. Beck, M. Bobbert, and G. Meschut, “Development
of a friction model for the numerical simulation of clinching processes,” Friction,
2024, doi: 10.26599/frict.2025.9441052.'
mla: Böhnke, Max, et al. “Development of a Friction Model for the Numerical Simulation
of Clinching Processes.” Friction, Tsinghua University Press, 2024, doi:10.26599/frict.2025.9441052.
short: M. Böhnke, C.R. Bielak, R. Beck, M. Bobbert, G. Meschut, Friction (2024).
date_created: 2024-12-11T14:45:57Z
date_updated: 2025-01-28T08:54:37Z
department:
- _id: '157'
doi: 10.26599/frict.2025.9441052
language:
- iso: eng
project:
- _id: '131'
name: 'TRR 285 - A: TRR 285 - Project Area A'
- _id: '135'
name: 'TRR 285 – A01: TRR 285 - Subproject A01'
publication: Friction
publication_identifier:
issn:
- 2223-7690
- 2223-7704
publication_status: published
publisher: Tsinghua University Press
quality_controlled: '1'
status: public
title: Development of a friction model for the numerical simulation of clinching processes
type: journal_article
user_id: '45779'
year: '2024'
...
---
_id: '55762'
abstract:
- lang: eng
text: The corrosion behavior of a hybrid laminate consisting of laser-structured
aluminum EN AW-6082 ∪ carbon fiber-reinforced polymer was investigated. Specimens
were corroded in aqueous NaCl electrolyte (0.1 mol/L) over a period of up to 31
days and characterized continuously by means of scanning electron and light microscopy,
supplemented by energy dispersive X-ray spectroscopy. Comparative linear sweep
voltammetry was employed on the first and seventh day of the corrosion experiment.
The influence of different laser morphologies and production process parameters
on corrosion behavior was compared. The corrosion reaction mainly arises from
the aluminum component and shows distinct differences in long-term corrosion morphology
between pure EN AW-6082 and the hybrid laminate. Compared to short-term investigations,
a strong influence of galvanic corrosion on the interface is assumed. No distinct
influences of different laser structuring and process parameters on the corrosion
behavior were detected. Weight measurements suggest a continuous loss of mass
attributed to the detachment of corrosion products.
article_number: '1907'
article_type: original
author:
- first_name: Alexander
full_name: Delp, Alexander
last_name: Delp
- first_name: Shuang
full_name: Wu, Shuang
id: '48039'
last_name: Wu
orcid: 0000-0001-8645-9952
- first_name: Jonathan
full_name: Freund, Jonathan
last_name: Freund
- first_name: Ronja
full_name: Scholz, Ronja
last_name: Scholz
- first_name: Miriam
full_name: Löbbecke, Miriam
last_name: Löbbecke
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Jan
full_name: Haubrich, Jan
last_name: Haubrich
- first_name: Frank
full_name: Walther, Frank
last_name: Walther
citation:
ama: Delp A, Wu S, Freund J, et al. Characterization of Interfacial Corrosion Behavior
of Hybrid Laminate EN AW-6082 ∪ CFRP. Materials. 2024;17(8). doi:10.3390/ma17081907
apa: Delp, A., Wu, S., Freund, J., Scholz, R., Löbbecke, M., Tröster, T., Haubrich,
J., & Walther, F. (2024). Characterization of Interfacial Corrosion Behavior
of Hybrid Laminate EN AW-6082 ∪ CFRP. Materials, 17(8), Article
1907. https://doi.org/10.3390/ma17081907
bibtex: '@article{Delp_Wu_Freund_Scholz_Löbbecke_Tröster_Haubrich_Walther_2024,
title={Characterization of Interfacial Corrosion Behavior of Hybrid Laminate EN
AW-6082 ∪ CFRP}, volume={17}, DOI={10.3390/ma17081907},
number={81907}, journal={Materials}, publisher={MDPI AG}, author={Delp, Alexander
and Wu, Shuang and Freund, Jonathan and Scholz, Ronja and Löbbecke, Miriam and
Tröster, Thomas and Haubrich, Jan and Walther, Frank}, year={2024} }'
chicago: Delp, Alexander, Shuang Wu, Jonathan Freund, Ronja Scholz, Miriam Löbbecke,
Thomas Tröster, Jan Haubrich, and Frank Walther. “Characterization of Interfacial
Corrosion Behavior of Hybrid Laminate EN AW-6082 ∪ CFRP.” Materials 17,
no. 8 (2024). https://doi.org/10.3390/ma17081907.
ieee: 'A. Delp et al., “Characterization of Interfacial Corrosion Behavior
of Hybrid Laminate EN AW-6082 ∪ CFRP,” Materials, vol. 17, no. 8, Art.
no. 1907, 2024, doi: 10.3390/ma17081907.'
mla: Delp, Alexander, et al. “Characterization of Interfacial Corrosion Behavior
of Hybrid Laminate EN AW-6082 ∪ CFRP.” Materials, vol. 17, no. 8, 1907,
MDPI AG, 2024, doi:10.3390/ma17081907.
short: A. Delp, S. Wu, J. Freund, R. Scholz, M. Löbbecke, T. Tröster, J. Haubrich,
F. Walther, Materials 17 (2024).
date_created: 2024-08-26T10:48:30Z
date_updated: 2025-01-30T12:31:13Z
department:
- _id: '321'
- _id: '149'
- _id: '9'
doi: 10.3390/ma17081907
intvolume: ' 17'
issue: '8'
language:
- iso: eng
publication: Materials
publication_identifier:
issn:
- 1996-1944
publication_status: published
publisher: MDPI AG
quality_controlled: '1'
status: public
title: Characterization of Interfacial Corrosion Behavior of Hybrid Laminate EN AW-6082
∪ CFRP
type: journal_article
user_id: '48039'
volume: 17
year: '2024'
...
---
_id: '58440'
author:
- first_name: Jan
full_name: Wippermann, Jan
id: '55686'
last_name: Wippermann
orcid: 0000-0002-5013-853X
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Wippermann J, Meschut G. Effect of Water Absorption on the Clamp Load of Plastic
Nuts. In: Proceedings of the Munich Symposium on Lightweight Design 2023.
Springer Nature Switzerland; 2024. doi:10.1007/978-3-031-64669-0_5'
apa: Wippermann, J., & Meschut, G. (2024). Effect of Water Absorption on the
Clamp Load of Plastic Nuts. In Proceedings of the Munich Symposium on Lightweight
Design 2023. Springer Nature Switzerland. https://doi.org/10.1007/978-3-031-64669-0_5
bibtex: '@inbook{Wippermann_Meschut_2024, place={Cham}, title={Effect of Water Absorption
on the Clamp Load of Plastic Nuts}, DOI={10.1007/978-3-031-64669-0_5},
booktitle={Proceedings of the Munich Symposium on Lightweight Design 2023}, publisher={Springer
Nature Switzerland}, author={Wippermann, Jan and Meschut, Gerson}, year={2024}
}'
chicago: 'Wippermann, Jan, and Gerson Meschut. “Effect of Water Absorption on the
Clamp Load of Plastic Nuts.” In Proceedings of the Munich Symposium on Lightweight
Design 2023. Cham: Springer Nature Switzerland, 2024. https://doi.org/10.1007/978-3-031-64669-0_5.'
ieee: 'J. Wippermann and G. Meschut, “Effect of Water Absorption on the Clamp Load
of Plastic Nuts,” in Proceedings of the Munich Symposium on Lightweight Design
2023, Cham: Springer Nature Switzerland, 2024.'
mla: Wippermann, Jan, and Gerson Meschut. “Effect of Water Absorption on the Clamp
Load of Plastic Nuts.” Proceedings of the Munich Symposium on Lightweight Design
2023, Springer Nature Switzerland, 2024, doi:10.1007/978-3-031-64669-0_5.
short: 'J. Wippermann, G. Meschut, in: Proceedings of the Munich Symposium on Lightweight
Design 2023, Springer Nature Switzerland, Cham, 2024.'
date_created: 2025-01-30T14:29:31Z
date_updated: 2025-01-30T14:40:50Z
department:
- _id: '157'
doi: 10.1007/978-3-031-64669-0_5
language:
- iso: eng
place: Cham
publication: Proceedings of the Munich Symposium on Lightweight Design 2023
publication_identifier:
isbn:
- '9783031646683'
- '9783031646690'
publication_status: published
publisher: Springer Nature Switzerland
quality_controlled: '1'
status: public
title: Effect of Water Absorption on the Clamp Load of Plastic Nuts
type: book_chapter
user_id: '55686'
year: '2024'
...
---
_id: '58442'
author:
- first_name: Jan
full_name: Wippermann, Jan
id: '55686'
last_name: Wippermann
orcid: 0000-0002-5013-853X
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: Wippermann J, Meschut G. Analyse des Ein- und Überdrehmoments von Kunststoffmuttern
in Abhängigkeit von der Luftfeuchtigkeit. JOINING PLASTICS. 2024;18.
apa: Wippermann, J., & Meschut, G. (2024). Analyse des Ein- und Überdrehmoments
von Kunststoffmuttern in Abhängigkeit von der Luftfeuchtigkeit. JOINING PLASTICS,
18.
bibtex: '@article{Wippermann_Meschut_2024, title={Analyse des Ein- und Überdrehmoments
von Kunststoffmuttern in Abhängigkeit von der Luftfeuchtigkeit}, volume={18},
journal={JOINING PLASTICS}, author={Wippermann, Jan and Meschut, Gerson}, year={2024}
}'
chicago: Wippermann, Jan, and Gerson Meschut. “Analyse Des Ein- Und Überdrehmoments
von Kunststoffmuttern in Abhängigkeit von Der Luftfeuchtigkeit.” JOINING PLASTICS
18 (2024).
ieee: J. Wippermann and G. Meschut, “Analyse des Ein- und Überdrehmoments von Kunststoffmuttern
in Abhängigkeit von der Luftfeuchtigkeit,” JOINING PLASTICS, vol. 18, 2024.
mla: Wippermann, Jan, and Gerson Meschut. “Analyse Des Ein- Und Überdrehmoments
von Kunststoffmuttern in Abhängigkeit von Der Luftfeuchtigkeit.” JOINING PLASTICS,
vol. 18, 2024.
short: J. Wippermann, G. Meschut, JOINING PLASTICS 18 (2024).
date_created: 2025-01-30T14:34:56Z
date_updated: 2025-01-30T14:38:37Z
department:
- _id: '157'
intvolume: ' 18'
language:
- iso: eng
publication: JOINING PLASTICS
quality_controlled: '1'
status: public
title: Analyse des Ein- und Überdrehmoments von Kunststoffmuttern in Abhängigkeit
von der Luftfeuchtigkeit
type: journal_article
user_id: '55686'
volume: 18
year: '2024'
...
---
_id: '53612'
author:
- first_name: Thiemo
full_name: Bloh, Thiemo
id: '69383'
last_name: Bloh
orcid: 0000-0002-2215-2924
- first_name: Martina
full_name: Homt, Martina
id: '11674'
last_name: Homt
- first_name: Bea
full_name: Bloh, Bea
id: '69910'
last_name: Bloh
citation:
ama: 'Bloh T, Homt M, Bloh B. Das Praxissemester aus Referendar:innenperspektive
– Forschende Grundhaltung zwischen erster und zweiter Ausbildungsphase. In: Korte
J, Wittek D, Schröder J, eds. Dokumentarische Professionalisierungsforschung
Bezogen Auf Das Lehramtsstudium. Verlag Julius Klinkhardt; 2024:194-215.'
apa: Bloh, T., Homt, M., & Bloh, B. (2024). Das Praxissemester aus Referendar:innenperspektive
– Forschende Grundhaltung zwischen erster und zweiter Ausbildungsphase. In J.
Korte, D. Wittek, & J. Schröder (Eds.), Dokumentarische Professionalisierungsforschung
bezogen auf das Lehramtsstudium (pp. 194–215). Verlag Julius Klinkhardt.
bibtex: '@inbook{Bloh_Homt_Bloh_2024, place={Bad Heilbrunn}, title={Das Praxissemester
aus Referendar:innenperspektive – Forschende Grundhaltung zwischen erster und
zweiter Ausbildungsphase}, booktitle={Dokumentarische Professionalisierungsforschung
bezogen auf das Lehramtsstudium}, publisher={Verlag Julius Klinkhardt}, author={Bloh,
Thiemo and Homt, Martina and Bloh, Bea}, editor={Korte, Jörg and Wittek, Doris
and Schröder, Jana}, year={2024}, pages={194–215} }'
chicago: 'Bloh, Thiemo, Martina Homt, and Bea Bloh. “Das Praxissemester Aus Referendar:Innenperspektive
– Forschende Grundhaltung Zwischen Erster Und Zweiter Ausbildungsphase.” In Dokumentarische
Professionalisierungsforschung Bezogen Auf Das Lehramtsstudium, edited by
Jörg Korte, Doris Wittek, and Jana Schröder, 194–215. Bad Heilbrunn: Verlag Julius
Klinkhardt, 2024.'
ieee: 'T. Bloh, M. Homt, and B. Bloh, “Das Praxissemester aus Referendar:innenperspektive
– Forschende Grundhaltung zwischen erster und zweiter Ausbildungsphase,” in Dokumentarische
Professionalisierungsforschung bezogen auf das Lehramtsstudium, J. Korte,
D. Wittek, and J. Schröder, Eds. Bad Heilbrunn: Verlag Julius Klinkhardt, 2024,
pp. 194–215.'
mla: Bloh, Thiemo, et al. “Das Praxissemester Aus Referendar:Innenperspektive –
Forschende Grundhaltung Zwischen Erster Und Zweiter Ausbildungsphase.” Dokumentarische
Professionalisierungsforschung Bezogen Auf Das Lehramtsstudium, edited by
Jörg Korte et al., Verlag Julius Klinkhardt, 2024, pp. 194–215.
short: 'T. Bloh, M. Homt, B. Bloh, in: J. Korte, D. Wittek, J. Schröder (Eds.),
Dokumentarische Professionalisierungsforschung Bezogen Auf Das Lehramtsstudium,
Verlag Julius Klinkhardt, Bad Heilbrunn, 2024, pp. 194–215.'
date_created: 2024-04-22T12:34:52Z
date_updated: 2025-02-03T11:22:52Z
department:
- _id: '36'
- _id: '456'
editor:
- first_name: Jörg
full_name: Korte, Jörg
last_name: Korte
- first_name: Doris
full_name: Wittek, Doris
last_name: Wittek
- first_name: Jana
full_name: Schröder, Jana
last_name: Schröder
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
page: 194-215
place: Bad Heilbrunn
publication: Dokumentarische Professionalisierungsforschung bezogen auf das Lehramtsstudium
publisher: Verlag Julius Klinkhardt
quality_controlled: '1'
related_material:
link:
- relation: confirmation
url: https://www.pedocs.de/frontdoor.php?source_opus=29359
status: public
title: Das Praxissemester aus Referendar:innenperspektive – Forschende Grundhaltung
zwischen erster und zweiter Ausbildungsphase
type: book_chapter
user_id: '11674'
year: '2024'
...
---
_id: '56132'
author:
- first_name: Janis
full_name: Wehde, Janis
id: '82257'
last_name: Wehde
orcid: https://orcid.org/0009-0008-0720-7828
- first_name: Bea
full_name: Bloh, Bea
id: '69910'
last_name: Bloh
- first_name: Martina
full_name: Homt, Martina
id: '11674'
last_name: Homt
citation:
ama: 'Wehde J, Bloh B, Homt M. Aktuelle Befunde zur politischen Involviertheit von
Lehramtsstudierenden in Nordrhein-Westfalen. In: ; 2024.'
apa: Wehde, J., Bloh, B., & Homt, M. (2024). Aktuelle Befunde zur politischen
Involviertheit von Lehramtsstudierenden in Nordrhein-Westfalen. Jahrestagung
der Arbeitsgruppe Empirische Pädagogische Forschung (AEPF), Osnabrück.
bibtex: '@inproceedings{Wehde_Bloh_Homt_2024, title={Aktuelle Befunde zur politischen
Involviertheit von Lehramtsstudierenden in Nordrhein-Westfalen}, author={Wehde,
Janis and Bloh, Bea and Homt, Martina}, year={2024} }'
chicago: Wehde, Janis, Bea Bloh, and Martina Homt. “Aktuelle Befunde zur politischen
Involviertheit von Lehramtsstudierenden in Nordrhein-Westfalen,” 2024.
ieee: J. Wehde, B. Bloh, and M. Homt, “Aktuelle Befunde zur politischen Involviertheit
von Lehramtsstudierenden in Nordrhein-Westfalen,” presented at the Jahrestagung
der Arbeitsgruppe Empirische Pädagogische Forschung (AEPF), Osnabrück, 2024.
mla: Wehde, Janis, et al. Aktuelle Befunde zur politischen Involviertheit von
Lehramtsstudierenden in Nordrhein-Westfalen. 2024.
short: 'J. Wehde, B. Bloh, M. Homt, in: 2024.'
conference:
end_date: 2024-09-12
location: Osnabrück
name: Jahrestagung der Arbeitsgruppe Empirische Pädagogische Forschung (AEPF)
start_date: 2024-09-10
date_created: 2024-09-14T09:45:02Z
date_updated: 2025-02-03T11:26:54Z
department:
- _id: '4'
- _id: '36'
- _id: '456'
language:
- iso: ger
project:
- _id: '1042'
name: 'DemoKult: DemoKult – Die unterrichtsbezogene Förderung von Kompetenzen für
eine demokratische Kultur'
quality_controlled: '1'
status: public
title: Aktuelle Befunde zur politischen Involviertheit von Lehramtsstudierenden in
Nordrhein-Westfalen
type: conference
user_id: '11674'
year: '2024'
...
---
_id: '56961'
abstract:
- lang: ger
text: Der Beitrag untersucht die Effekte eines zwei Sitzungen umfassenden, partizipativen
und themenunabhängig integrierbaren Lehrmoduls zur Stärkung der Demokratiebildungskompetenz
von Lehramtsstudierenden (N = 159) in einer quasi-experimentellen Studie vom Sommersemester
2023 bis zum Sommersemester 2024. Die Ergebnisse der zweifaktoriellen Varianzanalysen
mit Messwiederholungen (Pre-, Post- und Follow-up) verdeutlichen Effekte des Lehrmoduls
auf die Selbstwirksamkeitserwartungen der Studierenden zur partizipativ-verfahrensorientierten
Unterrichtsgestaltung und auf das methodische Wissen zur demokratischen Erarbeitung
von Beurteilungskriterien in unterrichtlichen Lehr-Lern-Arrangements.
article_type: original
author:
- first_name: Janis
full_name: Wehde, Janis
id: '82257'
last_name: Wehde
orcid: 0009-0008-0720-7828
citation:
ama: Wehde J. Effekte eines partizipativen Lehrmoduls zur Demokratiebildung im Lehramtsstudium.
Zeitschrift für Hochschulentwicklung. 2024;19(3):267-287. doi:10.21240/zfhe/19-03/15
apa: Wehde, J. (2024). Effekte eines partizipativen Lehrmoduls zur Demokratiebildung
im Lehramtsstudium. Zeitschrift für Hochschulentwicklung, 19(3),
267–287. https://doi.org/10.21240/zfhe/19-03/15
bibtex: '@article{Wehde_2024, title={Effekte eines partizipativen Lehrmoduls zur
Demokratiebildung im Lehramtsstudium}, volume={19}, DOI={10.21240/zfhe/19-03/15},
number={3}, journal={Zeitschrift für Hochschulentwicklung}, publisher={OAPublishing
Collective}, author={Wehde, Janis}, year={2024}, pages={267–287} }'
chicago: 'Wehde, Janis. “Effekte eines partizipativen Lehrmoduls zur Demokratiebildung
im Lehramtsstudium.” Zeitschrift für Hochschulentwicklung 19, no. 3 (2024):
267–87. https://doi.org/10.21240/zfhe/19-03/15.'
ieee: 'J. Wehde, “Effekte eines partizipativen Lehrmoduls zur Demokratiebildung
im Lehramtsstudium,” Zeitschrift für Hochschulentwicklung, vol. 19, no.
3, pp. 267–287, 2024, doi: 10.21240/zfhe/19-03/15.'
mla: Wehde, Janis. “Effekte eines partizipativen Lehrmoduls zur Demokratiebildung
im Lehramtsstudium.” Zeitschrift für Hochschulentwicklung, vol. 19, no.
3, OAPublishing Collective, 2024, pp. 267–87, doi:10.21240/zfhe/19-03/15.
short: J. Wehde, Zeitschrift für Hochschulentwicklung 19 (2024) 267–287.
date_created: 2024-11-08T14:44:09Z
date_updated: 2025-02-03T14:23:58Z
department:
- _id: '4'
- _id: '456'
doi: 10.21240/zfhe/19-03/15
intvolume: ' 19'
issue: '3'
language:
- iso: ger
main_file_link:
- open_access: '1'
url: https://www.zfhe.at/index.php/zfhe/article/view/2027
oa: '1'
page: 267-287
project:
- _id: '1042'
name: 'DemoKult: DemoKult – Die unterrichtsbezogene Förderung von Kompetenzen für
eine demokratische Kultur'
publication: Zeitschrift für Hochschulentwicklung
publication_identifier:
issn:
- 2219-6994
publication_status: published
publisher: OAPublishing Collective
quality_controlled: '1'
status: public
title: Effekte eines partizipativen Lehrmoduls zur Demokratiebildung im Lehramtsstudium
type: journal_article
user_id: '82257'
volume: 19
year: '2024'
...
---
_id: '56819'
author:
- first_name: Janis
full_name: Wehde, Janis
id: '82257'
last_name: Wehde
orcid: 0009-0008-0720-7828
citation:
ama: 'Wehde J. Überzeugungen von Lehramtsstudierenden zu Aspekten einer demokratischen
Unterrichtsgestaltung. In: ; 2024.'
apa: Wehde, J. (2024). Überzeugungen von Lehramtsstudierenden zu Aspekten einer
demokratischen Unterrichtsgestaltung. Tagung Demokratiebildung als Querschnittsaufgabe
der Lehrer:innenbildung, Trier.
bibtex: '@inproceedings{Wehde_2024, title={Überzeugungen von Lehramtsstudierenden
zu Aspekten einer demokratischen Unterrichtsgestaltung}, author={Wehde, Janis},
year={2024} }'
chicago: Wehde, Janis. “Überzeugungen von Lehramtsstudierenden Zu Aspekten Einer
Demokratischen Unterrichtsgestaltung,” 2024.
ieee: J. Wehde, “Überzeugungen von Lehramtsstudierenden zu Aspekten einer demokratischen
Unterrichtsgestaltung,” presented at the Tagung Demokratiebildung als Querschnittsaufgabe
der Lehrer:innenbildung, Trier, 2024.
mla: Wehde, Janis. Überzeugungen von Lehramtsstudierenden Zu Aspekten Einer Demokratischen
Unterrichtsgestaltung. 2024.
short: 'J. Wehde, in: 2024.'
conference:
end_date: 2024-10-11
location: Trier
name: Tagung Demokratiebildung als Querschnittsaufgabe der Lehrer:innenbildung
start_date: 2024-10-10
date_created: 2024-10-30T08:53:16Z
date_updated: 2025-02-03T14:24:42Z
department:
- _id: '4'
- _id: '456'
language:
- iso: eng
project:
- _id: '1042'
name: 'DemoKult: DemoKult – Die unterrichtsbezogene Förderung von Kompetenzen für
eine demokratische Kultur'
quality_controlled: '1'
status: public
title: Überzeugungen von Lehramtsstudierenden zu Aspekten einer demokratischen Unterrichtsgestaltung
type: conference
user_id: '82257'
year: '2024'
...
---
_id: '49652'
abstract:
- lang: eng
text: Broadband coherent anti-Stokes Raman scattering (BCARS) is a powerful spectroscopy
method combining high signal intensity with spectral sensitivity, enabling rapid
imaging of heterogeneous samples in biomedical research and, more recently, in
crystalline materials. However, BCARS encounters spectral distortion due to a
setup-dependent non-resonant background (NRB). This study assesses BCARS reproducibility
through a round robin experiment using two distinct BCARS setups and crystalline
materials with varying structural complexity, including diamond, 6H-SiC, KDP,
and KTP. The analysis compares setup-specific NRB correction procedures, detected
and NRB-removed spectra, and mode assignment. We determine the influence of BCARS
setup parameters like pump wavelength, pulse width, and detection geometry and
provide a practical guide for optimizing BCARS setups for solid-state applications.
article_number: '112'
article_type: original
author:
- first_name: Franz
full_name: Hempel, Franz
last_name: Hempel
- first_name: Federico
full_name: Vernuccio, Federico
last_name: Vernuccio
- first_name: Lukas
full_name: König, Lukas
last_name: König
- first_name: Robin
full_name: Buschbeck, Robin
last_name: Buschbeck
- first_name: Michael
full_name: Rüsing, Michael
id: '22501'
last_name: Rüsing
orcid: 0000-0003-4682-4577
- first_name: Giulio
full_name: Cerullo, Giulio
last_name: Cerullo
- first_name: Dario
full_name: Polli, Dario
last_name: Polli
- first_name: Lukas M.
full_name: Eng, Lukas M.
last_name: Eng
citation:
ama: 'Hempel F, Vernuccio F, König L, et al. Comparing transmission- and epi-BCARS:
a round robin on solid-state materials. Applied Optics. 2024;63(1). doi:10.1364/ao.505374'
apa: 'Hempel, F., Vernuccio, F., König, L., Buschbeck, R., Rüsing, M., Cerullo,
G., Polli, D., & Eng, L. M. (2024). Comparing transmission- and epi-BCARS:
a round robin on solid-state materials. Applied Optics, 63(1), Article
112. https://doi.org/10.1364/ao.505374'
bibtex: '@article{Hempel_Vernuccio_König_Buschbeck_Rüsing_Cerullo_Polli_Eng_2024,
title={Comparing transmission- and epi-BCARS: a round robin on solid-state materials},
volume={63}, DOI={10.1364/ao.505374},
number={1112}, journal={Applied Optics}, publisher={Optica Publishing Group},
author={Hempel, Franz and Vernuccio, Federico and König, Lukas and Buschbeck,
Robin and Rüsing, Michael and Cerullo, Giulio and Polli, Dario and Eng, Lukas
M.}, year={2024} }'
chicago: 'Hempel, Franz, Federico Vernuccio, Lukas König, Robin Buschbeck, Michael
Rüsing, Giulio Cerullo, Dario Polli, and Lukas M. Eng. “Comparing Transmission-
and Epi-BCARS: A Round Robin on Solid-State Materials.” Applied Optics
63, no. 1 (2024). https://doi.org/10.1364/ao.505374.'
ieee: 'F. Hempel et al., “Comparing transmission- and epi-BCARS: a round
robin on solid-state materials,” Applied Optics, vol. 63, no. 1, Art. no.
112, 2024, doi: 10.1364/ao.505374.'
mla: 'Hempel, Franz, et al. “Comparing Transmission- and Epi-BCARS: A Round Robin
on Solid-State Materials.” Applied Optics, vol. 63, no. 1, 112, Optica
Publishing Group, 2024, doi:10.1364/ao.505374.'
short: F. Hempel, F. Vernuccio, L. König, R. Buschbeck, M. Rüsing, G. Cerullo, D.
Polli, L.M. Eng, Applied Optics 63 (2024).
date_created: 2023-12-15T07:32:38Z
date_updated: 2025-04-03T12:36:01Z
department:
- _id: '15'
- _id: '288'
- _id: '623'
doi: 10.1364/ao.505374
intvolume: ' 63'
issue: '1'
keyword:
- Atomic and Molecular Physics
- and Optics
- Engineering (miscellaneous)
- Electrical and Electronic Engineering
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://arxiv.org/pdf/2306.09701.pdf
oa: '1'
publication: Applied Optics
publication_identifier:
issn:
- 1559-128X
- 2155-3165
publication_status: published
publisher: Optica Publishing Group
quality_controlled: '1'
related_material:
link:
- relation: confirmation
url: https://arxiv.org/abs/2306.09701
status: public
title: 'Comparing transmission- and epi-BCARS: a round robin on solid-state materials'
type: journal_article
user_id: '22501'
volume: 63
year: '2024'
...
---
_id: '54425'
abstract:
- lang: eng
text: "Zunehmend wird der Klimawandel prägender Faktor der Lebenswelten. Trotz innovativer
technischer\r\nLösungen scheint es schwer, zu einer Lebensweise zu finden, welche
menschliches Leben mit dem Erhalt\r\nfunktionierender Ökosysteme in Einklang bringt.
Der Beitrag widmet sich der Frage, wie es dazu\r\nkommen konnte, dass Menschen
die Welt so stark verändern, dass ihre eigene Zukunft bedroht ist und\r\nwie die
Gegenwartsliteratur auf diese Frage reagiert hat. Zugespitzt zeigen sich in unterschiedlichen\r\nKontexten,
in denen dieser Frage nachgegangen werden kann, zwei Antworten: 1. Durch einen
narrativen\r\nTrick ‒ zumeist eine leichte Verschiebung der Thematik ‒ wird ein
Ende ermöglicht, das Hoffnung auf\r\neine bessere Zukunft macht, 2. Der Mensch
wird als Auslaufmodell gesehen, das entweder abgeschafft\r\nwerden sollte oder
durch unverbesserliches Weitermachen den Planeten nachhaltig zerstören wird."
author:
- first_name: Swen
full_name: Schulte Eickholt, Swen
last_name: Schulte Eickholt
citation:
ama: Schulte Eickholt S. Klimawandel und Gegenwartsliteratur. diMaG. 2024;1(1):9-29.
doi:10.17619/UNIPB/1-1959
apa: Schulte Eickholt, S. (2024). Klimawandel und Gegenwartsliteratur. diMaG,
1(1), 9–29. https://doi.org/10.17619/UNIPB/1-1959
bibtex: '@article{Schulte Eickholt_2024, title={Klimawandel und Gegenwartsliteratur},
volume={1}, DOI={10.17619/UNIPB/1-1959},
number={1}, journal={diMaG}, publisher={LibreCat University}, author={Schulte
Eickholt, Swen}, year={2024}, pages={9–29} }'
chicago: 'Schulte Eickholt, Swen. “Klimawandel und Gegenwartsliteratur.” diMaG
1, no. 1 (2024): 9–29. https://doi.org/10.17619/UNIPB/1-1959.'
ieee: 'S. Schulte Eickholt, “Klimawandel und Gegenwartsliteratur,” diMaG,
vol. 1, no. 1, pp. 9–29, 2024, doi: 10.17619/UNIPB/1-1959.'
mla: Schulte Eickholt, Swen. “Klimawandel und Gegenwartsliteratur.” diMaG,
vol. 1, no. 1, LibreCat University, 2024, pp. 9–29, doi:10.17619/UNIPB/1-1959.
short: S. Schulte Eickholt, diMaG 1 (2024) 9–29.
date_created: 2024-05-23T09:10:44Z
date_updated: 2025-04-05T15:01:57Z
ddc:
- '830'
department:
- _id: '465'
doi: 10.17619/UNIPB/1-1959
file:
- access_level: closed
content_type: application/pdf
creator: swense
date_created: 2024-05-23T09:14:50Z
date_updated: 2024-05-23T09:14:50Z
file_id: '54426'
file_name: diMaG-Ausgabe1_Schulte Eickholt_S_9-30.pdf
file_size: 2130115
relation: main_file
success: 1
file_date_updated: 2024-05-23T09:14:50Z
has_accepted_license: '1'
intvolume: ' 1'
issue: '1'
keyword:
- Klimawandel
- Gegenwartsliteratur
- Narrative
- Anthropozän
- Klimawandelroman
language:
- iso: ger
page: 9-29
project:
- _id: '1058'
name: diMaG
publication: diMaG
publication_identifier:
issn:
- 2943-3010
publication_status: published
publisher: LibreCat University
quality_controlled: '1'
status: public
title: Klimawandel und Gegenwartsliteratur
type: journal_article
user_id: '7117'
volume: 1
year: '2024'
...
---
_id: '59247'
article_number: '102615'
article_type: original
author:
- first_name: Oleg
full_name: Ilyunin, Oleg
last_name: Ilyunin
- first_name: Oleksandr
full_name: Bezsonov, Oleksandr
last_name: Bezsonov
- first_name: Sergiy
full_name: Rudenko, Sergiy
last_name: Rudenko
- first_name: Nataliia
full_name: Serdiuk, Nataliia
last_name: Serdiuk
- first_name: Serhii
full_name: Udovenko, Serhii
last_name: Udovenko
- first_name: Petro
full_name: Kapustenko, Petro
last_name: Kapustenko
- first_name: Sergiy
full_name: Plankovskyy, Sergiy
last_name: Plankovskyy
- first_name: Olga
full_name: Arsenyeva, Olga
id: '101505'
last_name: Arsenyeva
orcid: https://orcid.org/0000-0001-9013-6451
citation:
ama: Ilyunin O, Bezsonov O, Rudenko S, et al. The neural network approach for estimation
of heat transfer coefficient in heat exchangers considering the fouling formation
dynamic. Thermal Science and Engineering Progress. 2024;51. doi:10.1016/j.tsep.2024.102615
apa: Ilyunin, O., Bezsonov, O., Rudenko, S., Serdiuk, N., Udovenko, S., Kapustenko,
P., Plankovskyy, S., & Arsenyeva, O. (2024). The neural network approach for
estimation of heat transfer coefficient in heat exchangers considering the fouling
formation dynamic. Thermal Science and Engineering Progress, 51,
Article 102615. https://doi.org/10.1016/j.tsep.2024.102615
bibtex: '@article{Ilyunin_Bezsonov_Rudenko_Serdiuk_Udovenko_Kapustenko_Plankovskyy_Arsenyeva_2024,
title={The neural network approach for estimation of heat transfer coefficient
in heat exchangers considering the fouling formation dynamic}, volume={51}, DOI={10.1016/j.tsep.2024.102615},
number={102615}, journal={Thermal Science and Engineering Progress}, publisher={Elsevier
BV}, author={Ilyunin, Oleg and Bezsonov, Oleksandr and Rudenko, Sergiy and Serdiuk,
Nataliia and Udovenko, Serhii and Kapustenko, Petro and Plankovskyy, Sergiy and
Arsenyeva, Olga}, year={2024} }'
chicago: Ilyunin, Oleg, Oleksandr Bezsonov, Sergiy Rudenko, Nataliia Serdiuk, Serhii
Udovenko, Petro Kapustenko, Sergiy Plankovskyy, and Olga Arsenyeva. “The Neural
Network Approach for Estimation of Heat Transfer Coefficient in Heat Exchangers
Considering the Fouling Formation Dynamic.” Thermal Science and Engineering
Progress 51 (2024). https://doi.org/10.1016/j.tsep.2024.102615.
ieee: 'O. Ilyunin et al., “The neural network approach for estimation of
heat transfer coefficient in heat exchangers considering the fouling formation
dynamic,” Thermal Science and Engineering Progress, vol. 51, Art. no. 102615,
2024, doi: 10.1016/j.tsep.2024.102615.'
mla: Ilyunin, Oleg, et al. “The Neural Network Approach for Estimation of Heat Transfer
Coefficient in Heat Exchangers Considering the Fouling Formation Dynamic.” Thermal
Science and Engineering Progress, vol. 51, 102615, Elsevier BV, 2024, doi:10.1016/j.tsep.2024.102615.
short: O. Ilyunin, O. Bezsonov, S. Rudenko, N. Serdiuk, S. Udovenko, P. Kapustenko,
S. Plankovskyy, O. Arsenyeva, Thermal Science and Engineering Progress 51 (2024).
date_created: 2025-04-02T10:47:21Z
date_updated: 2025-04-07T08:33:29Z
doi: 10.1016/j.tsep.2024.102615
intvolume: ' 51'
language:
- iso: eng
publication: Thermal Science and Engineering Progress
publication_identifier:
issn:
- 2451-9049
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: The neural network approach for estimation of heat transfer coefficient in
heat exchangers considering the fouling formation dynamic
type: journal_article
user_id: '101505'
volume: 51
year: '2024'
...
---
_id: '54964'
abstract:
- lang: eng
text: ' Although Sūrat al-Ikhlāṣ (Q 112) is one of the shortest sūrahs of the Qurʾān,
it has led to an extensive commentary on its structure and content in Muslim exe-getical
literature and in Western scholarship. This article takes the recent attempt to
contextualize the sūrah in Western scholarship as a starting point and proposes
new evidence for the nature of the religious milieu that shaped its form and content.
It posits several “intertexts” of creedal expressions, which shed light on the
discursive nature of the sūrah.'
article_type: original
author:
- first_name: Zishan
full_name: Ghaffar, Zishan
id: '83446'
last_name: Ghaffar
citation:
ama: Ghaffar Z. The Many Faces of Sūrat al-Ikhlāṣ. Journal of the International
Qur’anic Studies Association. 2024;9(1):19-45. doi:10.1515/jiqsa-2023-0012
apa: Ghaffar, Z. (2024). The Many Faces of Sūrat al-Ikhlāṣ. Journal of the International
Qur’anic Studies Association, 9(1), 19–45. https://doi.org/10.1515/jiqsa-2023-0012
bibtex: '@article{Ghaffar_2024, title={The Many Faces of Sūrat al-Ikhlāṣ}, volume={9},
DOI={10.1515/jiqsa-2023-0012},
number={1}, journal={Journal of the International Qur’anic Studies Association},
publisher={DeGruyter}, author={Ghaffar, Zishan}, year={2024}, pages={19–45} }'
chicago: 'Ghaffar, Zishan. “The Many Faces of Sūrat Al-Ikhlāṣ.” Journal of the
International Qur’anic Studies Association 9, no. 1 (2024): 19–45. https://doi.org/10.1515/jiqsa-2023-0012.'
ieee: 'Z. Ghaffar, “The Many Faces of Sūrat al-Ikhlāṣ,” Journal of the International
Qur’anic Studies Association, vol. 9, no. 1, pp. 19–45, 2024, doi: 10.1515/jiqsa-2023-0012.'
mla: Ghaffar, Zishan. “The Many Faces of Sūrat Al-Ikhlāṣ.” Journal of the International
Qur’anic Studies Association, vol. 9, no. 1, DeGruyter, 2024, pp. 19–45, doi:10.1515/jiqsa-2023-0012.
short: Z. Ghaffar, Journal of the International Qur’anic Studies Association 9 (2024)
19–45.
date_created: 2024-07-01T16:05:47Z
date_updated: 2025-04-07T11:09:39Z
ddc:
- '290'
department:
- _id: '469'
- _id: '550'
doi: 10.1515/jiqsa-2023-0012
file:
- access_level: closed
content_type: application/pdf
creator: ghaffar
date_created: 2024-12-12T14:32:31Z
date_updated: 2024-12-12T14:32:31Z
file_id: '57759'
file_name: 10.1515_jiqsa-2023-0012-1.pdf
file_size: 429899
relation: main_file
success: 1
file_date_updated: 2024-12-12T14:32:31Z
has_accepted_license: '1'
intvolume: ' 9'
issue: '1'
keyword:
- Qurʾān
- Christology
- Niceno-Constantinopolitan Creed
- Jacob of Serugh
- Syriac Christianity
- Credo
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.degruyter.com/document/doi/10.1515/jiqsa-2023-0012/html
oa: '1'
page: 19-45
publication: Journal of the International Qur’anic Studies Association
publisher: DeGruyter
quality_controlled: '1'
status: public
title: The Many Faces of Sūrat al-Ikhlāṣ
type: journal_article
user_id: '83446'
volume: 9
year: '2024'
...
---
_id: '59576'
article_type: original
author:
- first_name: Jarmila
full_name: Mildorf, Jarmila
id: '356'
last_name: Mildorf
citation:
ama: 'Mildorf J. Metalepsis in Radio Drama: Audionarratological Perspectives. Contemporanea:
rivista di studi sulla letteratura e sulla comunicazione . 2024;(22):133-141.'
apa: 'Mildorf, J. (2024). Metalepsis in Radio Drama: Audionarratological Perspectives.
Contemporanea: Rivista Di Studi Sulla Letteratura e Sulla Comunicazione ,
22, 133–141.'
bibtex: '@article{Mildorf_2024, title={Metalepsis in Radio Drama: Audionarratological
Perspectives}, number={22}, journal={Contemporanea: rivista di studi sulla letteratura
e sulla comunicazione }, author={Mildorf, Jarmila}, year={2024}, pages={133–141}
}'
chicago: 'Mildorf, Jarmila. “Metalepsis in Radio Drama: Audionarratological Perspectives.”
Contemporanea: Rivista Di Studi Sulla Letteratura e Sulla Comunicazione ,
no. 22 (2024): 133–41.'
ieee: 'J. Mildorf, “Metalepsis in Radio Drama: Audionarratological Perspectives,”
Contemporanea: rivista di studi sulla letteratura e sulla comunicazione ,
no. 22, pp. 133–141, 2024.'
mla: 'Mildorf, Jarmila. “Metalepsis in Radio Drama: Audionarratological Perspectives.”
Contemporanea: Rivista Di Studi Sulla Letteratura e Sulla Comunicazione ,
no. 22, 2024, pp. 133–41.'
short: 'J. Mildorf, Contemporanea: Rivista Di Studi Sulla Letteratura e Sulla Comunicazione (2024)
133–141.'
date_created: 2025-04-15T07:31:31Z
date_updated: 2025-04-15T07:31:48Z
department:
- _id: '1'
issue: '22'
language:
- iso: eng
page: 133-141
publication: 'Contemporanea: rivista di studi sulla letteratura e sulla comunicazione '
publication_identifier:
issn:
- 1724-6105
publication_status: published
quality_controlled: '1'
status: public
title: 'Metalepsis in Radio Drama: Audionarratological Perspectives'
type: journal_article
user_id: '356'
year: '2024'
...