--- _id: '61413' abstract: - lang: eng text: Climate change has led to a large number of countries deciding to reduce carbon dioxide (CO2) emissions significantly. As the mobility sector is a major contributor to CO2, various strategies are being pursued to achieve the climate targets set. An increasingly applied lightweight design method is the use of multi-material constructions. To join these structures, mechanical joining technologies such as self-pierce riveting are being used. As a result of the currently rigid tool systems, which cannot react to changing boundary conditions, a large number of rivet–die combinations is required to join the rising number of materials as well as material thickness combinations. Thus, new, versatile joining technologies are needed that can react to the described changes. The versatile self-piercing riveting (V-SPR) process is one possible approach. In this process, different material thicknesses can be joined by using a multi-range capable rivet which is set by a joining system with extended actuator technology. In this study, the V-SPR joining process is analysed numerically according to the influence of the geometrical rivet parameters on the joints characteristics as well as the resulting material flow. The investigations showed that the shank geometry has a decisive influence on the expansion of the rivet. Furthermore, the rivet length could be proven to be an influencing factor. By changing the head radii and the protrusion height, the forming behaviour of the rivet head onto the punch-sided joining part could be improved and thus the formation of air pockets was prevented. Based on the numerical investigations, a novel rivet geometry was developed and produced by machining. Subsequently, experimentally produced joints were analysed according to their joint formation and load-bearing capacity. article_number: '09544089241263141' author: - first_name: Fabian full_name: Kappe, Fabian id: '66459' last_name: Kappe - first_name: Mathias full_name: Bobbert, Mathias id: '7850' last_name: Bobbert - first_name: Gerson full_name: Meschut, Gerson id: '32056' last_name: Meschut orcid: 0000-0002-2763-1246 citation: ama: 'Kappe F, Bobbert M, Meschut G. Investigation of the influence of the rivet geometry on joint formation for a versatile self-piercing riveting process. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. Published online 2024. doi:10.1177/09544089241263141' apa: 'Kappe, F., Bobbert, M., & Meschut, G. (2024). Investigation of the influence of the rivet geometry on joint formation for a versatile self-piercing riveting process. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Article 09544089241263141. https://doi.org/10.1177/09544089241263141' bibtex: '@article{Kappe_Bobbert_Meschut_2024, title={Investigation of the influence of the rivet geometry on joint formation for a versatile self-piercing riveting process}, DOI={10.1177/09544089241263141}, number={09544089241263141}, journal={Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering}, publisher={SAGE Publications}, author={Kappe, Fabian and Bobbert, Mathias and Meschut, Gerson}, year={2024} }' chicago: 'Kappe, Fabian, Mathias Bobbert, and Gerson Meschut. “Investigation of the Influence of the Rivet Geometry on Joint Formation for a Versatile Self-Piercing Riveting Process.” Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2024. https://doi.org/10.1177/09544089241263141.' ieee: 'F. Kappe, M. Bobbert, and G. Meschut, “Investigation of the influence of the rivet geometry on joint formation for a versatile self-piercing riveting process,” Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Art. no. 09544089241263141, 2024, doi: 10.1177/09544089241263141.' mla: 'Kappe, Fabian, et al. “Investigation of the Influence of the Rivet Geometry on Joint Formation for a Versatile Self-Piercing Riveting Process.” Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089241263141, SAGE Publications, 2024, doi:10.1177/09544089241263141.' short: 'F. Kappe, M. Bobbert, G. Meschut, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (2024).' date_created: 2025-09-23T13:06:35Z date_updated: 2025-09-23T13:15:51Z department: - _id: '43' - _id: '157' doi: 10.1177/09544089241263141 language: - iso: eng project: - _id: '130' name: 'TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten' - _id: '133' name: TRR 285 - Project Area C - _id: '146' name: TRR 285 - Subproject C02 publication: 'Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering' publication_identifier: issn: - 0954-4089 - 2041-3009 publication_status: published publisher: SAGE Publications quality_controlled: '1' status: public title: Investigation of the influence of the rivet geometry on joint formation for a versatile self-piercing riveting process type: journal_article user_id: '44935' year: '2024' ... --- _id: '61414' abstract: - lang: eng text: The increasing significance of ecological responsibility, stricter political regulations and economic objectives are driving innovation in research fields such as lightweight construction. One of the most important popular methods is the use of multi-material systems. Due to the different geometric and mechanical properties of the various materials used, resource efficient applications and utilizations are possible. Great challenges arise for the joining processes to realize these multi-material systems, since conventional joining processes reach their limits. In the field of mechanical joining processes, there are continuously new approaches, such as superimposing the punch in a self-piercing riveting process with a tumbling kinematic, to increase the number of adaptable process parameters and enhance the process control. Through various preliminary tests, a good understanding of the process has been developed, which allows to directly control the geometric joint parameters by configuring the tumbling strategy. A major challenge, particularly with regard to future industrial applications, is the process time, which is comparatively high due to the tumbling kinematics. In the investigations, a reduction of approximately 90% of the process time is targeted by adapting the joining and tumbling strategy. Therefore, the correlation of the traverse velocity and the tumbling velocity are examined in a gradual series of experiments. To represent realistic applications, the experiments are carried out with a dual-phase steel and a precipitation-hardening aluminum alloy. For identifying the influence of the process parameters on the joining process, a constant rivet–die combination is applied. Further, the examination of force–displacement curves is conducted. Moreover, the determination of geometric joint parameters is reliant upon macrographs to assess the influence of the joining time on the geometric joint formation. The test results show that a significant increase in joining speed with a resulting reduction in process time is feasible. Although the joining properties are affected, reliable joining is possible. In particular, the shaft thickness of the rivet is influenced by the varying proportion of the tumbling process in the joining operation and increases with higher joining speeds. article_number: '09544089241248430' author: - first_name: Simon full_name: Wituschek, Simon id: '83423' last_name: Wituschek - first_name: Leonie full_name: Elbel, Leonie last_name: Elbel - first_name: Michael full_name: Lechner, Michael last_name: Lechner citation: ama: 'Wituschek S, Elbel L, Lechner M. Influence of the process time on a self-piercing riveting process with tumbling kinematic. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. Published online 2024. doi:10.1177/09544089241248430' apa: 'Wituschek, S., Elbel, L., & Lechner, M. (2024). Influence of the process time on a self-piercing riveting process with tumbling kinematic. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Article 09544089241248430. https://doi.org/10.1177/09544089241248430' bibtex: '@article{Wituschek_Elbel_Lechner_2024, title={Influence of the process time on a self-piercing riveting process with tumbling kinematic}, DOI={10.1177/09544089241248430}, number={09544089241248430}, journal={Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering}, publisher={SAGE Publications}, author={Wituschek, Simon and Elbel, Leonie and Lechner, Michael}, year={2024} }' chicago: 'Wituschek, Simon, Leonie Elbel, and Michael Lechner. “Influence of the Process Time on a Self-Piercing Riveting Process with Tumbling Kinematic.” Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2024. https://doi.org/10.1177/09544089241248430.' ieee: 'S. Wituschek, L. Elbel, and M. Lechner, “Influence of the process time on a self-piercing riveting process with tumbling kinematic,” Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Art. no. 09544089241248430, 2024, doi: 10.1177/09544089241248430.' mla: 'Wituschek, Simon, et al. “Influence of the Process Time on a Self-Piercing Riveting Process with Tumbling Kinematic.” Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089241248430, SAGE Publications, 2024, doi:10.1177/09544089241248430.' short: 'S. Wituschek, L. Elbel, M. Lechner, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (2024).' date_created: 2025-09-23T13:16:12Z date_updated: 2025-09-23T13:33:49Z doi: 10.1177/09544089241248430 language: - iso: eng project: - _id: '130' name: 'TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten' - _id: '133' name: TRR 285 - Project Area C - _id: '146' name: TRR 285 - Subproject C02 publication: 'Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering' publication_identifier: issn: - 0954-4089 - 2041-3009 publication_status: published publisher: SAGE Publications quality_controlled: '1' status: public title: Influence of the process time on a self-piercing riveting process with tumbling kinematic type: journal_article user_id: '44935' year: '2024' ... --- _id: '61415' abstract: - lang: eng text: 'Increasing material costs, decreasing availability, and ever-higher demands on environmental compatibility and complexity require new strategies in the development and production of functional components. Consequently, a combined approach from the areas of design, material science, and manufacturing is mandatory, in order to meet the requirements. Reducing the number of parts, using lightweight materials and applying hybrid components with a multimaterial mix are possible solutions. Nevertheless, conventional joining operations like welding or riveting are reaching their limits in terms of material utilization, load-bearing capacity as well as versatility of the process. Thus, innovative and versatile joining by forming operations and process combinations are focus of current research. In this context, the innovative process of orbital forming had been investigated as a joining by forming operation to manufacture load-adapted hybrid functional components. By tilting of one tool component during the process, a radial material flow is generated, allowing the crimping of the two joining partners. Nevertheless, the load-bearing capacity in axial direction could be identified as limiting factor for a possible application. Therefore, the aim of this investigation is the development of a fundamental process understanding on the influence of a novel geometrical adaption of the joint on the resulting load bearing capacity. The influence of varying geometrical proportions of the joint on the quality is evaluated, considering the form filling, the geometrical properties of the components as well as the maximum transmittable axial load. As joining partners, the dual-phase steel DP600 and the aluminum alloy EN AW-5754 with a thickness of 2.0 mm are used. ' article_number: '09544089241282807' author: - first_name: A. full_name: Hetzel, A. last_name: Hetzel - first_name: Simon full_name: Wituschek, Simon id: '83423' last_name: Wituschek - first_name: D. full_name: Römisch, D. last_name: Römisch - first_name: F. full_name: Sippel, F. last_name: Sippel - first_name: M. full_name: Lechner, M. last_name: Lechner - first_name: M. full_name: Merklein, M. last_name: Merklein citation: ama: 'Hetzel A, Wituschek S, Römisch D, Sippel F, Lechner M, Merklein M. Investigation on the load-bearing capacity and joint formation of hybrid functional components joined by orbital forming. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. Published online 2024. doi:10.1177/09544089241282807' apa: 'Hetzel, A., Wituschek, S., Römisch, D., Sippel, F., Lechner, M., & Merklein, M. (2024). Investigation on the load-bearing capacity and joint formation of hybrid functional components joined by orbital forming. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Article 09544089241282807. https://doi.org/10.1177/09544089241282807' bibtex: '@article{Hetzel_Wituschek_Römisch_Sippel_Lechner_Merklein_2024, title={Investigation on the load-bearing capacity and joint formation of hybrid functional components joined by orbital forming}, DOI={10.1177/09544089241282807}, number={09544089241282807}, journal={Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering}, publisher={SAGE Publications}, author={Hetzel, A. and Wituschek, Simon and Römisch, D. and Sippel, F. and Lechner, M. and Merklein, M.}, year={2024} }' chicago: 'Hetzel, A., Simon Wituschek, D. Römisch, F. Sippel, M. Lechner, and M. Merklein. “Investigation on the Load-Bearing Capacity and Joint Formation of Hybrid Functional Components Joined by Orbital Forming.” Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2024. https://doi.org/10.1177/09544089241282807.' ieee: 'A. Hetzel, S. Wituschek, D. Römisch, F. Sippel, M. Lechner, and M. Merklein, “Investigation on the load-bearing capacity and joint formation of hybrid functional components joined by orbital forming,” Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Art. no. 09544089241282807, 2024, doi: 10.1177/09544089241282807.' mla: 'Hetzel, A., et al. “Investigation on the Load-Bearing Capacity and Joint Formation of Hybrid Functional Components Joined by Orbital Forming.” Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089241282807, SAGE Publications, 2024, doi:10.1177/09544089241282807.' short: 'A. Hetzel, S. Wituschek, D. Römisch, F. Sippel, M. Lechner, M. Merklein, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (2024).' date_created: 2025-09-23T13:21:21Z date_updated: 2025-09-23T13:34:05Z doi: 10.1177/09544089241282807 language: - iso: eng project: - _id: '130' name: 'TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten' - _id: '133' name: TRR 285 - Project Area C - _id: '146' name: TRR 285 - Subproject C02 - _id: '145' name: TRR 285 - Subproject C01 publication: 'Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering' publication_identifier: issn: - 0954-4089 - 2041-3009 publication_status: published publisher: SAGE Publications quality_controlled: '1' status: public title: Investigation on the load-bearing capacity and joint formation of hybrid functional components joined by orbital forming type: journal_article user_id: '44935' year: '2024' ... --- _id: '61416' abstract: - lang: eng text: "Abstract\r\n An efficient lightweight construction method is the combination of different materials in order to adapt the structure to the applied load. To join these multi-material structures mechanical joining technologies are applied. However, the rigid tooling systems cannot be adjusted to changing boundary conditions which is why new, versatile joining technologies are required. In the versatile self-piercing riveting (V-SPR) process presented in [1] different material combination are joined by using a multi-range capable rivet. The rivet head is formed onto the respective thickness of the joint by an outer punch. In order to punch thru the upper sheet a great rivet hardness is required whereas a lower hardness is required for the subsequent forming of the rivet head. To achieve a combination of these requirements, this study investigates a local heat treatment of the rivet. The aim is to determine the feasibility of such a heat treatment as well as to investigate the influence on the joint formation." article_number: '012009' author: - first_name: Fabian full_name: Kappe, Fabian id: '66459' last_name: Kappe - first_name: Mathias full_name: Bobbert, Mathias id: '7850' last_name: Bobbert - first_name: Gerson full_name: Meschut, Gerson id: '32056' last_name: Meschut orcid: 0000-0002-2763-1246 citation: ama: 'Kappe F, Bobbert M, Meschut G. Influence of local heat treatment of rivets on the joint formation of a versatile joining process. IOP Conference Series: Materials Science and Engineering. 2024;1307(1). doi:10.1088/1757-899x/1307/1/012009' apa: 'Kappe, F., Bobbert, M., & Meschut, G. (2024). Influence of local heat treatment of rivets on the joint formation of a versatile joining process. IOP Conference Series: Materials Science and Engineering, 1307(1), Article 012009. https://doi.org/10.1088/1757-899x/1307/1/012009' bibtex: '@article{Kappe_Bobbert_Meschut_2024, title={Influence of local heat treatment of rivets on the joint formation of a versatile joining process}, volume={1307}, DOI={10.1088/1757-899x/1307/1/012009}, number={1012009}, journal={IOP Conference Series: Materials Science and Engineering}, publisher={IOP Publishing}, author={Kappe, Fabian and Bobbert, Mathias and Meschut, Gerson}, year={2024} }' chicago: 'Kappe, Fabian, Mathias Bobbert, and Gerson Meschut. “Influence of Local Heat Treatment of Rivets on the Joint Formation of a Versatile Joining Process.” IOP Conference Series: Materials Science and Engineering 1307, no. 1 (2024). https://doi.org/10.1088/1757-899x/1307/1/012009.' ieee: 'F. Kappe, M. Bobbert, and G. Meschut, “Influence of local heat treatment of rivets on the joint formation of a versatile joining process,” IOP Conference Series: Materials Science and Engineering, vol. 1307, no. 1, Art. no. 012009, 2024, doi: 10.1088/1757-899x/1307/1/012009.' mla: 'Kappe, Fabian, et al. “Influence of Local Heat Treatment of Rivets on the Joint Formation of a Versatile Joining Process.” IOP Conference Series: Materials Science and Engineering, vol. 1307, no. 1, 012009, IOP Publishing, 2024, doi:10.1088/1757-899x/1307/1/012009.' short: 'F. Kappe, M. Bobbert, G. Meschut, IOP Conference Series: Materials Science and Engineering 1307 (2024).' date_created: 2025-09-23T13:31:11Z date_updated: 2025-09-23T13:34:12Z department: - _id: '43' doi: 10.1088/1757-899x/1307/1/012009 intvolume: ' 1307' issue: '1' language: - iso: eng project: - _id: '130' name: 'TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten' - _id: '133' name: TRR 285 - Project Area C - _id: '146' name: TRR 285 - Subproject C02 publication: 'IOP Conference Series: Materials Science and Engineering' publication_identifier: issn: - 1757-8981 - 1757-899X publication_status: published publisher: IOP Publishing quality_controlled: '1' status: public title: Influence of local heat treatment of rivets on the joint formation of a versatile joining process type: journal_article user_id: '44935' volume: 1307 year: '2024' ... --- _id: '55429' abstract: - lang: eng text: A detailed understanding of the cognitive process underlying diagnostic reasoning in medical experts is currently lacking. While high-level theories like hypothetico-deductive reasoning were proposed long ago, the inner workings of the step-by-step dynamics within the mind remain unknown. We present a fully automated approach to elicit, monitor, and record diagnostic reasoning processes at a fine-grained level. A web-based user interface enables physicians to carry out a full diagnosis process on a simulated patient, given as a pre-defined clinical vignette. By collecting the physician’s information queries and hypothesis revisions, highly detailed diagnostic reasoning trajectories are captured leading to a diagnosis and its justification. Four expert epileptologists with a mean experience of 19 years were recruited to evaluate the system and share their impressions in semi-structured interviews. We find that the recorded trajectories validate proposed theories on broader diagnostic reasoning, while also providing valuable additional details extending previous findings. author: - first_name: Dominik full_name: Battefeld, Dominik id: '91864' last_name: Battefeld orcid: 0000-0002-5480-0594 - first_name: Sigrid full_name: Mues, Sigrid last_name: Mues - first_name: Tim full_name: Wehner, Tim last_name: Wehner - first_name: Patrick full_name: House, Patrick last_name: House - first_name: Christoph full_name: Kellinghaus, Christoph last_name: Kellinghaus - first_name: Jörg full_name: Wellmer, Jörg last_name: Wellmer - first_name: Stefan full_name: Kopp, Stefan last_name: Kopp citation: ama: 'Battefeld D, Mues S, Wehner T, et al. Revealing the Dynamics of Medical Diagnostic Reasoning as Step-by-Step Cognitive Process Trajectories. In: Proceedings of the 46th Annual Conference of the Cognitive Science Society. ; 2024.' apa: Battefeld, D., Mues, S., Wehner, T., House, P., Kellinghaus, C., Wellmer, J., & Kopp, S. (2024). Revealing the Dynamics of Medical Diagnostic Reasoning as Step-by-Step Cognitive Process Trajectories. Proceedings of the 46th Annual Conference of the Cognitive Science Society. The Annual Meeting of the Cognitive Science Society, Rotterdam, NL. bibtex: '@inproceedings{Battefeld_Mues_Wehner_House_Kellinghaus_Wellmer_Kopp_2024, title={Revealing the Dynamics of Medical Diagnostic Reasoning as Step-by-Step Cognitive Process Trajectories}, booktitle={Proceedings of the 46th Annual Conference of the Cognitive Science Society}, author={Battefeld, Dominik and Mues, Sigrid and Wehner, Tim and House, Patrick and Kellinghaus, Christoph and Wellmer, Jörg and Kopp, Stefan}, year={2024} }' chicago: Battefeld, Dominik, Sigrid Mues, Tim Wehner, Patrick House, Christoph Kellinghaus, Jörg Wellmer, and Stefan Kopp. “Revealing the Dynamics of Medical Diagnostic Reasoning as Step-by-Step Cognitive Process Trajectories.” In Proceedings of the 46th Annual Conference of the Cognitive Science Society, 2024. ieee: D. Battefeld et al., “Revealing the Dynamics of Medical Diagnostic Reasoning as Step-by-Step Cognitive Process Trajectories,” presented at the The Annual Meeting of the Cognitive Science Society, Rotterdam, NL, 2024. mla: Battefeld, Dominik, et al. “Revealing the Dynamics of Medical Diagnostic Reasoning as Step-by-Step Cognitive Process Trajectories.” Proceedings of the 46th Annual Conference of the Cognitive Science Society, 2024. short: 'D. Battefeld, S. Mues, T. Wehner, P. House, C. Kellinghaus, J. Wellmer, S. Kopp, in: Proceedings of the 46th Annual Conference of the Cognitive Science Society, 2024.' conference: end_date: 2024-07-27 location: Rotterdam, NL name: The Annual Meeting of the Cognitive Science Society start_date: 2024-07-24 date_created: 2024-07-30T08:17:35Z date_updated: 2025-09-23T15:11:19Z ddc: - '000' department: - _id: '660' file: - access_level: closed content_type: application/pdf creator: doba2 date_created: 2024-07-30T08:21:13Z date_updated: 2024-07-30T08:21:13Z file_id: '55430' file_name: Battefeld_2024_Revealing-the-dynamics.pdf file_size: 486513 relation: main_file success: 1 file_date_updated: 2024-07-30T08:21:13Z has_accepted_license: '1' keyword: - Differential Diagnosis - Diagnostic Reasoning - Reasoning Process Analysis - Seizure - Epilepsy language: - iso: eng project: - _id: '128' name: 'TRR 318 - C5: TRR 318 - Subproject C5' publication: Proceedings of the 46th Annual Conference of the Cognitive Science Society publication_status: published quality_controlled: '1' status: public title: Revealing the Dynamics of Medical Diagnostic Reasoning as Step-by-Step Cognitive Process Trajectories type: conference user_id: '91864' year: '2024' ... --- _id: '61498' article_type: original author: - first_name: Katrin full_name: Koenig, Katrin last_name: Koenig citation: ama: 'Koenig K. Confidence regained: Providence and prayer in the works of Catherine of Siena, Anne Conway and Simone Weil. Scottish Journal of Theology. 2024;77(4):346-361. doi:10.1017/s0036930624000553' apa: 'Koenig, K. (2024). Confidence regained: Providence and prayer in the works of Catherine of Siena, Anne Conway and Simone Weil. Scottish Journal of Theology, 77(4), 346–361. https://doi.org/10.1017/s0036930624000553' bibtex: '@article{Koenig_2024, title={Confidence regained: Providence and prayer in the works of Catherine of Siena, Anne Conway and Simone Weil}, volume={77}, DOI={10.1017/s0036930624000553}, number={4}, journal={Scottish Journal of Theology}, publisher={Cambridge University Press (CUP)}, author={Koenig, Katrin}, year={2024}, pages={346–361} }' chicago: 'Koenig, Katrin. “Confidence Regained: Providence and Prayer in the Works of Catherine of Siena, Anne Conway and Simone Weil.” Scottish Journal of Theology 77, no. 4 (2024): 346–61. https://doi.org/10.1017/s0036930624000553.' ieee: 'K. Koenig, “Confidence regained: Providence and prayer in the works of Catherine of Siena, Anne Conway and Simone Weil,” Scottish Journal of Theology, vol. 77, no. 4, pp. 346–361, 2024, doi: 10.1017/s0036930624000553.' mla: 'Koenig, Katrin. “Confidence Regained: Providence and Prayer in the Works of Catherine of Siena, Anne Conway and Simone Weil.” Scottish Journal of Theology, vol. 77, no. 4, Cambridge University Press (CUP), 2024, pp. 346–61, doi:10.1017/s0036930624000553.' short: K. Koenig, Scottish Journal of Theology 77 (2024) 346–361. date_created: 2025-10-02T07:26:14Z date_updated: 2025-10-02T11:12:47Z department: - _id: '20' doi: 10.1017/s0036930624000553 extern: '1' intvolume: ' 77' issue: '4' language: - iso: eng page: 346-361 publication: Scottish Journal of Theology publication_identifier: issn: - 0036-9306 - 1475-3065 publication_status: published publisher: Cambridge University Press (CUP) quality_controlled: '1' status: public title: 'Confidence regained: Providence and prayer in the works of Catherine of Siena, Anne Conway and Simone Weil' type: journal_article user_id: '118819' volume: 77 year: '2024' ... --- _id: '61766' author: - first_name: Gregor full_name: Reschke, Gregor last_name: Reschke - first_name: Alexander full_name: Brosius, Alexander last_name: Brosius citation: ama: 'Reschke G, Brosius A. Transiente Dynamische Analyse – Vergleich zeit- und frequenzdiskreter Auswertemethoden anhand geclinchter Aluminiumverbindungen. In: Krupp U, Steller I, eds. Werkstoffe und Bauteile auf dem Prüfstand. Stahlinstitut VDEh; 2024.' apa: Reschke, G., & Brosius, A. (2024). Transiente Dynamische Analyse – Vergleich zeit- und frequenzdiskreter Auswertemethoden anhand geclinchter Aluminiumverbindungen. In U. Krupp & I. Steller (Eds.), Werkstoffe und Bauteile auf dem Prüfstand. Stahlinstitut VDEh. bibtex: '@inproceedings{Reschke_Brosius_2024, place={Düsseldorf}, title={Transiente Dynamische Analyse – Vergleich zeit- und frequenzdiskreter Auswertemethoden anhand geclinchter Aluminiumverbindungen}, booktitle={Werkstoffe und Bauteile auf dem Prüfstand}, publisher={Stahlinstitut VDEh}, author={Reschke, Gregor and Brosius, Alexander}, editor={Krupp, Ulrich and Steller, Ingo}, year={2024} }' chicago: 'Reschke, Gregor, and Alexander Brosius. “Transiente Dynamische Analyse – Vergleich zeit- und frequenzdiskreter Auswertemethoden anhand geclinchter Aluminiumverbindungen.” In Werkstoffe und Bauteile auf dem Prüfstand, edited by Ulrich Krupp and Ingo Steller. Düsseldorf: Stahlinstitut VDEh, 2024.' ieee: G. Reschke and A. Brosius, “Transiente Dynamische Analyse – Vergleich zeit- und frequenzdiskreter Auswertemethoden anhand geclinchter Aluminiumverbindungen,” in Werkstoffe und Bauteile auf dem Prüfstand, Krefeld, 2024. mla: Reschke, Gregor, and Alexander Brosius. “Transiente Dynamische Analyse – Vergleich zeit- und frequenzdiskreter Auswertemethoden anhand geclinchter Aluminiumverbindungen.” Werkstoffe und Bauteile auf dem Prüfstand, edited by Ulrich Krupp and Ingo Steller, Stahlinstitut VDEh, 2024. short: 'G. Reschke, A. Brosius, in: U. Krupp, I. Steller (Eds.), Werkstoffe und Bauteile auf dem Prüfstand, Stahlinstitut VDEh, Düsseldorf, 2024.' conference: end_date: 2024-12-06 location: Krefeld name: 42. Vortrags- und Diskussionstagung Werkstoffprüfung 2024 start_date: 2024-12-05 date_created: 2025-10-09T06:24:40Z date_updated: 2025-10-09T06:32:46Z department: - _id: '43' editor: - first_name: Ulrich full_name: Krupp, Ulrich last_name: Krupp - first_name: Ingo full_name: Steller, Ingo last_name: Steller language: - iso: ger place: Düsseldorf project: - _id: '130' name: 'TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten' - _id: '133' name: TRR 285 - Project Area C - _id: '148' name: TRR 285 - Subproject C04 publication: Werkstoffe und Bauteile auf dem Prüfstand publication_identifier: isbn: - 978-3-941269-97-2 publication_status: published publisher: Stahlinstitut VDEh quality_controlled: '1' status: public title: Transiente Dynamische Analyse – Vergleich zeit- und frequenzdiskreter Auswertemethoden anhand geclinchter Aluminiumverbindungen type: conference user_id: '98812' year: '2024' ... --- _id: '52511' abstract: - lang: ger text: Sind „soziale Medien“ überhaupt ein Thema für die Geschichtswissenschaft? Ja, denn die längere Geschichte der Digitalisierung, in der die „sozialen Medien“ einzuordnen sind, zählt bereits über 80 Jahre. Konrad Zuse und andere Ingenieure entwickelten seit 1941 die ersten Digitalcomputer, Unternehmer*innen, Wissenschaftler*innen und Staatenlenker*innen setzten diese seit den 1950er Jahren für ihre Zwecke ein, die Zivilgesellschaft adaptierte sie in den darauffolgenden Dekaden – all das prägte die sozio-digitale Landschaft der späteren „sozialen Medien“. Als unmittelbar „nach dem Boom“ etwa um 1970 zahlreiche Industriegesellschaften einen strukturellen Wandel in Wirtschaft, Gesellschaft und Politik durchlebten, war eine Antwort darauf die vermehrte Digitalisierung und Vernetzung. Daraus entwickelte sich die 1990er Jahre als markante Dekade von World Wide Web, Google und Chatdiensten. Die Entwicklung der „sozialen Medien“ ist also unter anderem in eine ökonomische und gesellschaftliche Entwicklung der Aufmerksamkeitsökonomie und in die längeren Veränderungen von Wirtschafts- und Gesellschaftsordnungen der Ausdifferenzierung und partiellen Individualisierung seit den 1960er Jahren einzuordnen. Dadurch lässt sich besser verstehen, welche Prämissen ihnen zugrunde lagen, welche Möglichkeitsräume und Probleme sich daraus ergaben und warum sie die heutige Öffentlichkeit in einer bestimmten Art und Weise dominieren – ohne sie jedoch zu determinieren. author: - first_name: Martin full_name: Schmitt, Martin id: '100968' last_name: Schmitt citation: ama: 'Schmitt M. Die Vorgeschichte der „sozialen Medien“. Über die Träume digitaler Vergemeinschaftung und freier Kommunikation. In: Bundeszentrale für politische Bildung, ed. Soziale Medien – Wie Sie Wurden, Was Sie Sind . Bundeszentrale für politische Bildung; 2024.' apa: Schmitt, M. (2024). Die Vorgeschichte der „sozialen Medien“. Über die Träume digitaler Vergemeinschaftung und freier Kommunikation. In Bundeszentrale für politische Bildung (Ed.), Soziale Medien – wie sie wurden, was sie sind . Bundeszentrale für politische Bildung. bibtex: '@inbook{Schmitt_2024, place={Bonn}, title={Die Vorgeschichte der „sozialen Medien“. Über die Träume digitaler Vergemeinschaftung und freier Kommunikation}, booktitle={Soziale Medien – wie sie wurden, was sie sind }, publisher={Bundeszentrale für politische Bildung}, author={Schmitt, Martin}, editor={Bundeszentrale für politische Bildung}, year={2024} }' chicago: 'Schmitt, Martin. “Die Vorgeschichte Der „sozialen Medien“. Über Die Träume Digitaler Vergemeinschaftung Und Freier Kommunikation.” In Soziale Medien – Wie Sie Wurden, Was Sie Sind , edited by Bundeszentrale für politische Bildung. Bonn: Bundeszentrale für politische Bildung, 2024.' ieee: 'M. Schmitt, “Die Vorgeschichte der „sozialen Medien“. Über die Träume digitaler Vergemeinschaftung und freier Kommunikation,” in Soziale Medien – wie sie wurden, was sie sind , Bundeszentrale für politische Bildung, Ed. Bonn: Bundeszentrale für politische Bildung, 2024.' mla: Schmitt, Martin. “Die Vorgeschichte Der „sozialen Medien“. Über Die Träume Digitaler Vergemeinschaftung Und Freier Kommunikation.” Soziale Medien – Wie Sie Wurden, Was Sie Sind , edited by Bundeszentrale für politische Bildung, Bundeszentrale für politische Bildung, 2024. short: 'M. Schmitt, in: Bundeszentrale für politische Bildung (Ed.), Soziale Medien – Wie Sie Wurden, Was Sie Sind , Bundeszentrale für politische Bildung, Bonn, 2024.' corporate_editor: - Bundeszentrale für politische Bildung date_created: 2024-03-12T15:35:33Z date_updated: 2025-10-21T16:41:46Z department: - _id: '514' - _id: '615' jel: - N7 keyword: - Digitalgeschichte - Soziale Medien - Technikgeschichte - World Wide Web - Digitalisierung language: - iso: eng main_file_link: - open_access: '1' url: https://www.bpb.de/themen/medien-journalismus/soziale-medien/545765/die-vorgeschichte-der-sozialen-medien/ oa: '1' place: Bonn publication: 'Soziale Medien – wie sie wurden, was sie sind ' publisher: Bundeszentrale für politische Bildung quality_controlled: '1' status: public title: Die Vorgeschichte der „sozialen Medien“. Über die Träume digitaler Vergemeinschaftung und freier Kommunikation type: book_chapter user_id: '100968' year: '2024' ... --- _id: '62067' abstract: - lang: eng text: Most FPGA boards in the HPC domain are well-suited for parallel scaling because of the direct integration of versatile and high-throughput network ports. However, the utilization of their network capabilities is often challenging and error-prone because the whole network stack and communication patterns have to be implemented and managed on the FPGAs. Also, this approach conceptually involves a trade-off between the performance potential of improved communication and the impact of resource consumption for communication infrastructure, since the utilized resources on the FPGAs could otherwise be used for computations. In this work, we investigate this trade-off, firstly, by using synthetic benchmarks to evaluate the different configuration options of the communication framework ACCL and their impact on communication latency and throughput. Finally, we use our findings to implement a shallow water simulation whose scalability heavily depends on low-latency communication. With a suitable configuration of ACCL, good scaling behavior can be shown to all 48 FPGAs installed in the system. Overall, the results show that the availability of inter-FPGA communication frameworks as well as the configurability of framework and network stack are crucial to achieve the best application performance with low latency communication. author: - first_name: Marius full_name: Meyer, Marius id: '40778' last_name: Meyer - first_name: Tobias full_name: Kenter, Tobias id: '3145' last_name: Kenter - first_name: Lucian full_name: Petrica, Lucian last_name: Petrica - first_name: Kenneth full_name: O’Brien, Kenneth last_name: O’Brien - first_name: Michaela full_name: Blott, Michaela last_name: Blott - first_name: Christian full_name: Plessl, Christian id: '16153' last_name: Plessl orcid: 0000-0001-5728-9982 citation: ama: 'Meyer M, Kenter T, Petrica L, O’Brien K, Blott M, Plessl C. Optimizing Communication for Latency Sensitive HPC Applications on up to 48 FPGAs Using ACCL. In: Lecture Notes in Computer Science. Springer Nature Switzerland; 2024. doi:10.1007/978-3-031-69766-1_9' apa: Meyer, M., Kenter, T., Petrica, L., O’Brien, K., Blott, M., & Plessl, C. (2024). Optimizing Communication for Latency Sensitive HPC Applications on up to 48 FPGAs Using ACCL. In Lecture Notes in Computer Science. Springer Nature Switzerland. https://doi.org/10.1007/978-3-031-69766-1_9 bibtex: '@inbook{Meyer_Kenter_Petrica_O’Brien_Blott_Plessl_2024, place={Cham}, title={Optimizing Communication for Latency Sensitive HPC Applications on up to 48 FPGAs Using ACCL}, DOI={10.1007/978-3-031-69766-1_9}, booktitle={Lecture Notes in Computer Science}, publisher={Springer Nature Switzerland}, author={Meyer, Marius and Kenter, Tobias and Petrica, Lucian and O’Brien, Kenneth and Blott, Michaela and Plessl, Christian}, year={2024} }' chicago: 'Meyer, Marius, Tobias Kenter, Lucian Petrica, Kenneth O’Brien, Michaela Blott, and Christian Plessl. “Optimizing Communication for Latency Sensitive HPC Applications on up to 48 FPGAs Using ACCL.” In Lecture Notes in Computer Science. Cham: Springer Nature Switzerland, 2024. https://doi.org/10.1007/978-3-031-69766-1_9.' ieee: 'M. Meyer, T. Kenter, L. Petrica, K. O’Brien, M. Blott, and C. Plessl, “Optimizing Communication for Latency Sensitive HPC Applications on up to 48 FPGAs Using ACCL,” in Lecture Notes in Computer Science, Cham: Springer Nature Switzerland, 2024.' mla: Meyer, Marius, et al. “Optimizing Communication for Latency Sensitive HPC Applications on up to 48 FPGAs Using ACCL.” Lecture Notes in Computer Science, Springer Nature Switzerland, 2024, doi:10.1007/978-3-031-69766-1_9. short: 'M. Meyer, T. Kenter, L. Petrica, K. O’Brien, M. Blott, C. Plessl, in: Lecture Notes in Computer Science, Springer Nature Switzerland, Cham, 2024.' date_created: 2025-11-04T09:50:24Z date_updated: 2025-11-04T09:51:22Z department: - _id: '27' - _id: '518' doi: 10.1007/978-3-031-69766-1_9 language: - iso: eng main_file_link: - open_access: '1' oa: '1' place: Cham project: - _id: '52' name: Computing Resources Provided by the Paderborn Center for Parallel Computing publication: Lecture Notes in Computer Science publication_identifier: isbn: - '9783031697654' - '9783031697661' issn: - 0302-9743 - 1611-3349 publication_status: published publisher: Springer Nature Switzerland quality_controlled: '1' status: public title: Optimizing Communication for Latency Sensitive HPC Applications on up to 48 FPGAs Using ACCL type: book_chapter user_id: '3145' year: '2024' ... --- _id: '56604' abstract: - lang: eng text: This manuscript makes the claim of having computed the 9th Dedekind number, D(9). This was done by accelerating the core operation of the process with an efficient FPGA design that outperforms an optimized 64-core CPU reference by 95x. The FPGA execution was parallelized on the Noctua 2 supercomputer at Paderborn University. The resulting value for D(9) is 286386577668298411128469151667598498812366. This value can be verified in two steps. We have made the data file containing the 490 M results available, each of which can be verified separately on CPU, and the whole file sums to our proposed value. The paper explains the mathematical approach in the first part, before putting the focus on a deep dive into the FPGA accelerator implementation followed by a performance analysis. The FPGA implementation was done in Register-Transfer Level using a dual-clock architecture and shows how we achieved an impressive FMax of 450 MHz on the targeted Stratix 10 GX 2,800 FPGAs. The total compute time used was 47,000 FPGA hours. author: - first_name: Lennart full_name: Van Hirtum, Lennart id: '100210' last_name: Van Hirtum - first_name: Patrick full_name: De Causmaecker, Patrick last_name: De Causmaecker - first_name: Jens full_name: Goemaere, Jens last_name: Goemaere - first_name: Tobias full_name: Kenter, Tobias id: '3145' last_name: Kenter - first_name: Heinrich full_name: Riebler, Heinrich id: '8961' last_name: Riebler - first_name: Michael full_name: Lass, Michael id: '24135' last_name: Lass orcid: 0000-0002-5708-7632 - first_name: Christian full_name: Plessl, Christian id: '16153' last_name: Plessl orcid: 0000-0001-5728-9982 citation: ama: Van Hirtum L, De Causmaecker P, Goemaere J, et al. A Computation of the Ninth Dedekind Number Using FPGA Supercomputing. ACM Transactions on Reconfigurable Technology and Systems. 2024;17(3):1-28. doi:10.1145/3674147 apa: Van Hirtum, L., De Causmaecker, P., Goemaere, J., Kenter, T., Riebler, H., Lass, M., & Plessl, C. (2024). A Computation of the Ninth Dedekind Number Using FPGA Supercomputing. ACM Transactions on Reconfigurable Technology and Systems, 17(3), 1–28. https://doi.org/10.1145/3674147 bibtex: '@article{Van Hirtum_De Causmaecker_Goemaere_Kenter_Riebler_Lass_Plessl_2024, title={A Computation of the Ninth Dedekind Number Using FPGA Supercomputing}, volume={17}, DOI={10.1145/3674147}, number={3}, journal={ACM Transactions on Reconfigurable Technology and Systems}, publisher={Association for Computing Machinery (ACM)}, author={Van Hirtum, Lennart and De Causmaecker, Patrick and Goemaere, Jens and Kenter, Tobias and Riebler, Heinrich and Lass, Michael and Plessl, Christian}, year={2024}, pages={1–28} }' chicago: 'Van Hirtum, Lennart, Patrick De Causmaecker, Jens Goemaere, Tobias Kenter, Heinrich Riebler, Michael Lass, and Christian Plessl. “A Computation of the Ninth Dedekind Number Using FPGA Supercomputing.” ACM Transactions on Reconfigurable Technology and Systems 17, no. 3 (2024): 1–28. https://doi.org/10.1145/3674147.' ieee: 'L. Van Hirtum et al., “A Computation of the Ninth Dedekind Number Using FPGA Supercomputing,” ACM Transactions on Reconfigurable Technology and Systems, vol. 17, no. 3, pp. 1–28, 2024, doi: 10.1145/3674147.' mla: Van Hirtum, Lennart, et al. “A Computation of the Ninth Dedekind Number Using FPGA Supercomputing.” ACM Transactions on Reconfigurable Technology and Systems, vol. 17, no. 3, Association for Computing Machinery (ACM), 2024, pp. 1–28, doi:10.1145/3674147. short: L. Van Hirtum, P. De Causmaecker, J. Goemaere, T. Kenter, H. Riebler, M. Lass, C. Plessl, ACM Transactions on Reconfigurable Technology and Systems 17 (2024) 1–28. date_created: 2024-10-14T07:38:29Z date_updated: 2025-11-04T09:53:26Z department: - _id: '27' - _id: '518' doi: 10.1145/3674147 intvolume: ' 17' issue: '3' language: - iso: eng main_file_link: - open_access: '1' oa: '1' page: 1-28 project: - _id: '52' name: 'PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing' publication: ACM Transactions on Reconfigurable Technology and Systems publication_identifier: issn: - 1936-7406 - 1936-7414 publication_status: published publisher: Association for Computing Machinery (ACM) quality_controlled: '1' status: public title: A Computation of the Ninth Dedekind Number Using FPGA Supercomputing type: journal_article user_id: '3145' volume: 17 year: '2024' ... --- _id: '53503' author: - first_name: Kaan full_name: Olgu, Kaan last_name: Olgu - first_name: Tobias full_name: Kenter, Tobias id: '3145' last_name: Kenter - first_name: Jose full_name: Nunez-Yanez, Jose last_name: Nunez-Yanez - first_name: Simon full_name: Mcintosh-Smith, Simon last_name: Mcintosh-Smith citation: ama: 'Olgu K, Kenter T, Nunez-Yanez J, Mcintosh-Smith S. Optimisation and Evaluation of Breadth First Search with oneAPI/SYCL on Intel FPGAs: from Describing Algorithms to Describing Architectures. In: Proceedings of the 12th International Workshop on OpenCL and SYCL. ACM; 2024. doi:10.1145/3648115.3648134' apa: 'Olgu, K., Kenter, T., Nunez-Yanez, J., & Mcintosh-Smith, S. (2024). Optimisation and Evaluation of Breadth First Search with oneAPI/SYCL on Intel FPGAs: from Describing Algorithms to Describing Architectures. Proceedings of the 12th International Workshop on OpenCL and SYCL. https://doi.org/10.1145/3648115.3648134' bibtex: '@inproceedings{Olgu_Kenter_Nunez-Yanez_Mcintosh-Smith_2024, title={Optimisation and Evaluation of Breadth First Search with oneAPI/SYCL on Intel FPGAs: from Describing Algorithms to Describing Architectures}, DOI={10.1145/3648115.3648134}, booktitle={Proceedings of the 12th International Workshop on OpenCL and SYCL}, publisher={ACM}, author={Olgu, Kaan and Kenter, Tobias and Nunez-Yanez, Jose and Mcintosh-Smith, Simon}, year={2024} }' chicago: 'Olgu, Kaan, Tobias Kenter, Jose Nunez-Yanez, and Simon Mcintosh-Smith. “Optimisation and Evaluation of Breadth First Search with OneAPI/SYCL on Intel FPGAs: From Describing Algorithms to Describing Architectures.” In Proceedings of the 12th International Workshop on OpenCL and SYCL. ACM, 2024. https://doi.org/10.1145/3648115.3648134.' ieee: 'K. Olgu, T. Kenter, J. Nunez-Yanez, and S. Mcintosh-Smith, “Optimisation and Evaluation of Breadth First Search with oneAPI/SYCL on Intel FPGAs: from Describing Algorithms to Describing Architectures,” 2024, doi: 10.1145/3648115.3648134.' mla: 'Olgu, Kaan, et al. “Optimisation and Evaluation of Breadth First Search with OneAPI/SYCL on Intel FPGAs: From Describing Algorithms to Describing Architectures.” Proceedings of the 12th International Workshop on OpenCL and SYCL, ACM, 2024, doi:10.1145/3648115.3648134.' short: 'K. Olgu, T. Kenter, J. Nunez-Yanez, S. Mcintosh-Smith, in: Proceedings of the 12th International Workshop on OpenCL and SYCL, ACM, 2024.' date_created: 2024-04-15T07:41:21Z date_updated: 2025-11-04T09:53:59Z department: - _id: '27' - _id: '518' doi: 10.1145/3648115.3648134 language: - iso: eng project: - _id: '52' name: 'PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing' publication: Proceedings of the 12th International Workshop on OpenCL and SYCL publication_status: published publisher: ACM quality_controlled: '1' status: public title: 'Optimisation and Evaluation of Breadth First Search with oneAPI/SYCL on Intel FPGAs: from Describing Algorithms to Describing Architectures' type: conference user_id: '3145' year: '2024' ... --- _id: '57834' author: - first_name: Mats full_name: Vernholz, Mats id: '76955' last_name: Vernholz orcid: 0000-0001-5175-357X citation: ama: 'Vernholz M. Gewerblich-technische Lehrkräftebildung in Deutschland - Analyse der Einflüsse auf das akademische Selbstkonzept von Lehramtsstudierenden technischer (beruflicher) Fachrichtungen. In: Kögler K, Kremer H-H, Herkner V, eds. Jahrbuch Der Berufs- Und Wirtschaftspädagogischen Forschung 2024. Verlag Barbara Budrich; 2024:132-147. doi:10.3224/84743054' apa: Vernholz, M. (2024). Gewerblich-technische Lehrkräftebildung in Deutschland - Analyse der Einflüsse auf das akademische Selbstkonzept von Lehramtsstudierenden technischer (beruflicher) Fachrichtungen. In K. Kögler, H.-H. Kremer, & V. Herkner (Eds.), Jahrbuch der berufs- und wirtschaftspädagogischen Forschung 2024 (pp. 132–147). Verlag Barbara Budrich. https://doi.org/10.3224/84743054 bibtex: '@inbook{Vernholz_2024, place={Opladen, Berlin, Toronto}, title={Gewerblich-technische Lehrkräftebildung in Deutschland - Analyse der Einflüsse auf das akademische Selbstkonzept von Lehramtsstudierenden technischer (beruflicher) Fachrichtungen}, DOI={10.3224/84743054}, booktitle={Jahrbuch der berufs- und wirtschaftspädagogischen Forschung 2024}, publisher={Verlag Barbara Budrich}, author={Vernholz, Mats}, editor={Kögler, Kristina and Kremer, H.-Hugo and Herkner, Volkmar}, year={2024}, pages={132–147} }' chicago: 'Vernholz, Mats. “Gewerblich-Technische Lehrkräftebildung in Deutschland - Analyse Der Einflüsse Auf Das Akademische Selbstkonzept von Lehramtsstudierenden Technischer (Beruflicher) Fachrichtungen.” In Jahrbuch Der Berufs- Und Wirtschaftspädagogischen Forschung 2024, edited by Kristina Kögler, H.-Hugo Kremer, and Volkmar Herkner, 132–47. Opladen, Berlin, Toronto: Verlag Barbara Budrich, 2024. https://doi.org/10.3224/84743054.' ieee: 'M. Vernholz, “Gewerblich-technische Lehrkräftebildung in Deutschland - Analyse der Einflüsse auf das akademische Selbstkonzept von Lehramtsstudierenden technischer (beruflicher) Fachrichtungen,” in Jahrbuch der berufs- und wirtschaftspädagogischen Forschung 2024, K. Kögler, H.-H. Kremer, and V. Herkner, Eds. Opladen, Berlin, Toronto: Verlag Barbara Budrich, 2024, pp. 132–147.' mla: Vernholz, Mats. “Gewerblich-Technische Lehrkräftebildung in Deutschland - Analyse Der Einflüsse Auf Das Akademische Selbstkonzept von Lehramtsstudierenden Technischer (Beruflicher) Fachrichtungen.” Jahrbuch Der Berufs- Und Wirtschaftspädagogischen Forschung 2024, edited by Kristina Kögler et al., Verlag Barbara Budrich, 2024, pp. 132–47, doi:10.3224/84743054. short: 'M. Vernholz, in: K. Kögler, H.-H. Kremer, V. Herkner (Eds.), Jahrbuch Der Berufs- Und Wirtschaftspädagogischen Forschung 2024, Verlag Barbara Budrich, Opladen, Berlin, Toronto, 2024, pp. 132–147.' date_created: 2024-12-18T09:48:39Z date_updated: 2025-11-05T09:50:42Z department: - _id: '300' doi: 10.3224/84743054 editor: - first_name: Kristina full_name: Kögler, Kristina last_name: Kögler - first_name: H.-Hugo full_name: Kremer, H.-Hugo last_name: Kremer - first_name: Volkmar full_name: Herkner, Volkmar last_name: Herkner language: - iso: eng page: 132-147 place: Opladen, Berlin, Toronto publication: Jahrbuch der berufs- und wirtschaftspädagogischen Forschung 2024 publisher: Verlag Barbara Budrich quality_controlled: '1' status: public title: Gewerblich-technische Lehrkräftebildung in Deutschland - Analyse der Einflüsse auf das akademische Selbstkonzept von Lehramtsstudierenden technischer (beruflicher) Fachrichtungen type: book_chapter user_id: '76955' year: '2024' ... --- _id: '54690' abstract: - lang: eng text: 'In basketball, an attacking player often plays a pass to one side while looking to the other side. This head fake provokes a conflict in the observing opponent, as the processing of the head orientation interferes with the processing of the pass direction. Accordingly, responses to passes with head fakes are slower and result in more errors than responses to passes without head fakes (head-fake effect). The head-fake effect and structurally similar interference effects (e.g., Stroop effect) are modulated by the frequency of conflicting trials. Previous studies mostly applied a block-wise manipulation of proportion congruency. However, in basketball (and also in other team sports), where different individual opponents can be encountered, it might be important to take the individual frequency (e.g., 20% vs. 80%) of these opponents into account. Therefore, the present study investigates the possibility to quickly (i.e., on a trial-by-trial basis) reconfigure the response behavior to different proportions of incongruent trials, which are contingent on different basketball players. Results point out that participants indeed adapted to the fake-frequency of different basketball players, which could be the result of strategic adaptation processes. Multi-level analyses, however, indicate that a substantial portion of the player-specific adaptation to fake frequencies is accounted by episodic retrieval processes, suggesting that item-specific proportion congruency effects can be explained in terms of stimulus-response binding and retrieval: The head orientation (e.g., to the right) of a current stimulus retrieves the last episode with the same head orientation including the response that was part of this last episode. Thus, from a theoretical perspective, an attacking player would provoke the strongest detrimental effect on an opponent if s/he repeats the same head movement but changes the direction of the pass. Whether it is at all possible to strategically apply this recommendation in practice needs still to be answered.' article_type: original author: - first_name: Iris full_name: Güldenpenning, Iris id: '52931' last_name: Güldenpenning orcid: 0000-0003-0549-5543 - first_name: Nils Tobias full_name: Böer, Nils Tobias id: '52000' last_name: Böer orcid: 0000-0002-0236-7282 - first_name: Wilfried full_name: Kunde, Wilfried last_name: Kunde - first_name: Carina G. full_name: Giesen, Carina G. last_name: Giesen - first_name: Klaus full_name: Rothermund, Klaus last_name: Rothermund - first_name: Matthias full_name: Weigelt, Matthias id: '36388' last_name: Weigelt citation: ama: 'Güldenpenning I, Böer NT, Kunde W, Giesen CG, Rothermund K, Weigelt M. Context-specific adaptation for head fakes in basketball: a study on player-specific fake-frequency schedules. Psychological Research. 2024;88:1702-1711. doi:10.1007/s00426-024-01977-2' apa: 'Güldenpenning, I., Böer, N. T., Kunde, W., Giesen, C. G., Rothermund, K., & Weigelt, M. (2024). Context-specific adaptation for head fakes in basketball: a study on player-specific fake-frequency schedules. Psychological Research, 88, 1702–1711. https://doi.org/10.1007/s00426-024-01977-2' bibtex: '@article{Güldenpenning_Böer_Kunde_Giesen_Rothermund_Weigelt_2024, title={Context-specific adaptation for head fakes in basketball: a study on player-specific fake-frequency schedules}, volume={88}, DOI={10.1007/s00426-024-01977-2}, journal={Psychological Research}, author={Güldenpenning, Iris and Böer, Nils Tobias and Kunde, Wilfried and Giesen, Carina G. and Rothermund, Klaus and Weigelt, Matthias}, year={2024}, pages={1702–1711} }' chicago: 'Güldenpenning, Iris, Nils Tobias Böer, Wilfried Kunde, Carina G. Giesen, Klaus Rothermund, and Matthias Weigelt. “Context-Specific Adaptation for Head Fakes in Basketball: A Study on Player-Specific Fake-Frequency Schedules.” Psychological Research 88 (2024): 1702–11. https://doi.org/10.1007/s00426-024-01977-2.' ieee: 'I. Güldenpenning, N. T. Böer, W. Kunde, C. G. Giesen, K. Rothermund, and M. Weigelt, “Context-specific adaptation for head fakes in basketball: a study on player-specific fake-frequency schedules,” Psychological Research, vol. 88, pp. 1702–1711, 2024, doi: 10.1007/s00426-024-01977-2.' mla: 'Güldenpenning, Iris, et al. “Context-Specific Adaptation for Head Fakes in Basketball: A Study on Player-Specific Fake-Frequency Schedules.” Psychological Research, vol. 88, 2024, pp. 1702–11, doi:10.1007/s00426-024-01977-2.' short: I. Güldenpenning, N.T. Böer, W. Kunde, C.G. Giesen, K. Rothermund, M. Weigelt, Psychological Research 88 (2024) 1702–1711. date_created: 2024-06-11T08:38:25Z date_updated: 2025-11-06T13:36:26Z ddc: - '150' department: - _id: '35' - _id: '17' - _id: '266' doi: 10.1007/s00426-024-01977-2 file: - access_level: open_access content_type: application/pdf creator: iguelden date_created: 2024-06-11T08:38:20Z date_updated: 2024-06-11T08:38:20Z file_id: '54691' file_name: Güldenpenning et al. 2024.pdf file_size: 1022453 relation: main_file file_date_updated: 2024-06-11T08:38:20Z has_accepted_license: '1' intvolume: ' 88' language: - iso: eng main_file_link: - open_access: '1' url: https://link.springer.com/article/10.1007/s00426-024-01977-2 oa: '1' page: 1702-1711 publication: Psychological Research publication_status: published quality_controlled: '1' status: public title: 'Context-specific adaptation for head fakes in basketball: a study on player-specific fake-frequency schedules' type: journal_article user_id: '52000' volume: 88 year: '2024' ... --- _id: '57311' article_type: original author: - first_name: Keke full_name: Yang, Keke id: '65085' last_name: Yang orcid: 0000-0001-9201-9304 - first_name: Matthias full_name: Sowada, Matthias id: '44475' last_name: Sowada - first_name: Viktoria full_name: Olfert, Viktoria id: '5974' last_name: Olfert - first_name: Georg full_name: Seitz, Georg last_name: Seitz - first_name: Vincent full_name: Schreiber, Vincent last_name: Schreiber - first_name: Marcel full_name: Heitmann, Marcel id: '38072' last_name: Heitmann orcid: 0009-0002-4181-8928 - first_name: David full_name: Hein, David id: '7728' last_name: Hein - first_name: Max full_name: Biegler, Max last_name: Biegler - first_name: Sven full_name: Jüttner, Sven last_name: Jüttner - first_name: Michael full_name: Rethmeier, Michael last_name: Rethmeier - first_name: Gerson full_name: Meschut, Gerson id: '32056' last_name: Meschut orcid: 0000-0002-2763-1246 citation: ama: 'Yang K, Sowada M, Olfert V, et al. Influence of liquid metal embrittlement on the failure behavior of dissimilar spot welds with advanced high-strength steel: A component study. Journal of Materials Research and Technology. Published online 2024. doi:10.1016/j.jmrt.2024.11.166' apa: 'Yang, K., Sowada, M., Olfert, V., Seitz, G., Schreiber, V., Heitmann, M., Hein, D., Biegler, M., Jüttner, S., Rethmeier, M., & Meschut, G. (2024). Influence of liquid metal embrittlement on the failure behavior of dissimilar spot welds with advanced high-strength steel: A component study. Journal of Materials Research and Technology. https://doi.org/10.1016/j.jmrt.2024.11.166' bibtex: '@article{Yang_Sowada_Olfert_Seitz_Schreiber_Heitmann_Hein_Biegler_Jüttner_Rethmeier_et al._2024, title={Influence of liquid metal embrittlement on the failure behavior of dissimilar spot welds with advanced high-strength steel: A component study}, DOI={10.1016/j.jmrt.2024.11.166}, journal={Journal of Materials Research and Technology}, publisher={Elsevier BV}, author={Yang, Keke and Sowada, Matthias and Olfert, Viktoria and Seitz, Georg and Schreiber, Vincent and Heitmann, Marcel and Hein, David and Biegler, Max and Jüttner, Sven and Rethmeier, Michael and et al.}, year={2024} }' chicago: 'Yang, Keke, Matthias Sowada, Viktoria Olfert, Georg Seitz, Vincent Schreiber, Marcel Heitmann, David Hein, et al. “Influence of Liquid Metal Embrittlement on the Failure Behavior of Dissimilar Spot Welds with Advanced High-Strength Steel: A Component Study.” Journal of Materials Research and Technology, 2024. https://doi.org/10.1016/j.jmrt.2024.11.166.' ieee: 'K. Yang et al., “Influence of liquid metal embrittlement on the failure behavior of dissimilar spot welds with advanced high-strength steel: A component study,” Journal of Materials Research and Technology, 2024, doi: 10.1016/j.jmrt.2024.11.166.' mla: 'Yang, Keke, et al. “Influence of Liquid Metal Embrittlement on the Failure Behavior of Dissimilar Spot Welds with Advanced High-Strength Steel: A Component Study.” Journal of Materials Research and Technology, Elsevier BV, 2024, doi:10.1016/j.jmrt.2024.11.166.' short: K. Yang, M. Sowada, V. Olfert, G. Seitz, V. Schreiber, M. Heitmann, D. Hein, M. Biegler, S. Jüttner, M. Rethmeier, G. Meschut, Journal of Materials Research and Technology (2024). date_created: 2024-11-21T14:25:40Z date_updated: 2025-11-10T14:20:05Z ddc: - '620' department: - _id: '157' doi: 10.1016/j.jmrt.2024.11.166 file: - access_level: closed content_type: application/pdf creator: kekeyang date_created: 2025-02-07T10:06:14Z date_updated: 2025-02-07T10:06:14Z file_id: '58533' file_name: KYA_VÖ5.pdf file_size: 10799297 relation: main_file success: 1 file_date_updated: 2025-02-07T10:06:14Z has_accepted_license: '1' language: - iso: eng main_file_link: - open_access: '1' oa: '1' publication: Journal of Materials Research and Technology publication_identifier: issn: - 2238-7854 publication_status: published publisher: Elsevier BV quality_controlled: '1' status: public title: 'Influence of liquid metal embrittlement on the failure behavior of dissimilar spot welds with advanced high-strength steel: A component study' type: journal_article user_id: '65085' year: '2024' ... --- _id: '56670' abstract: - lang: eng text: Systems Engineering is becoming increasingly important in the engineering of complex technical systems. Its introduction is forcing companies to undertake major transformation initiatives. As established change management approaches show, the corporate culture is an important key criterion for success of transformation. Therefore, when introducing Systems Engineering into an organization, transformation initiatives must be tailored to an existing corporate culture or the corporate culture itself must be changed in order to enable Systems Engineering. In literature and in industrial practice, different approaches for assessment of corporate culture exist. Within this research, a systematic literature review on methods and models for corporate culture assessment is conducted. Core elements are collected and combined with the fundamentals and success factors of Systems Engineering to develop a model for corporate culture assessment. The developed model is applied to the industrial practice of an ongoing Systems Engineering transformation of a large car manufacturer. The results of the assessment are compared with the emerging project challenges. Based on this model and its supporting tool and templates, organizations and transformation leaders are enabled to rapidly obtain an orientation of hindering or supporting currently established cultural aspects with regard to Systems Engineering transformation and to provide a decision basis for further measures. author: - first_name: Iris full_name: Graessler, Iris last_name: Graessler - first_name: Benedikt full_name: Grewe, Benedikt last_name: Grewe citation: ama: 'Graessler I, Grewe B. Importance of cultural change in Systems Engineering Transformation: A model for cultural assessment. In: AHFE International. Vol 158. AHFE International; 2024. doi:10.54941/ahfe1005551' apa: 'Graessler, I., & Grewe, B. (2024). Importance of cultural change in Systems Engineering Transformation: A model for cultural assessment. AHFE International, 158. https://doi.org/10.54941/ahfe1005551' bibtex: '@inproceedings{Graessler_Grewe_2024, title={Importance of cultural change in Systems Engineering Transformation: A model for cultural assessment}, volume={158}, DOI={10.54941/ahfe1005551}, booktitle={AHFE International}, publisher={AHFE International}, author={Graessler, Iris and Grewe, Benedikt}, year={2024} }' chicago: 'Graessler, Iris, and Benedikt Grewe. “Importance of Cultural Change in Systems Engineering Transformation: A Model for Cultural Assessment.” In AHFE International, Vol. 158. AHFE International, 2024. https://doi.org/10.54941/ahfe1005551.' ieee: 'I. Graessler and B. Grewe, “Importance of cultural change in Systems Engineering Transformation: A model for cultural assessment,” in AHFE International, 2024, vol. 158, doi: 10.54941/ahfe1005551.' mla: 'Graessler, Iris, and Benedikt Grewe. “Importance of Cultural Change in Systems Engineering Transformation: A Model for Cultural Assessment.” AHFE International, vol. 158, AHFE International, 2024, doi:10.54941/ahfe1005551.' short: 'I. Graessler, B. Grewe, in: AHFE International, AHFE International, 2024.' date_created: 2024-10-17T15:13:46Z date_updated: 2025-11-11T06:11:50Z department: - _id: '152' doi: 10.54941/ahfe1005551 intvolume: ' 158' language: - iso: eng main_file_link: - open_access: '1' url: https://openaccess.cms-conferences.org/publications/book/978-1-964867-34-2/article/978-1-964867-34-2_28 oa: '1' publication: AHFE International publication_identifier: issn: - 2771-0718 publication_status: published publisher: AHFE International quality_controlled: '1' status: public title: 'Importance of cultural change in Systems Engineering Transformation: A model for cultural assessment' type: conference user_id: '52359' volume: 158 year: '2024' ... --- _id: '62255' abstract: - lang: eng text: AbstractCellular stress and ageing involve an increase in crowding and aggregation of amylogenic proteins. We here investigate if crowding is the intrinsic cause of aggregation and utilise a previously established non-protein aggregation sensor, namely pseudoisocyanine chloride (PIC). PIC shows fibrillization in cells into a highly fluorescent J-aggregated state and is sensitive to crowding. Surprisingly, cell stress conditions stabilise the monomeric rather than the aggregated state of PIC both in the cytoplasm and in stress granules. Regarding the different physiochemical changes of the cytoplasm occurring upon cell stress, involving volume reduction, phase separation and solidification, the intrinsic crowding effect is not the key factor to drive associated self-assembly processes. article_number: '230' author: - first_name: Roland full_name: Pollak, Roland last_name: Pollak - first_name: Leon full_name: Koch, Leon last_name: Koch - first_name: Benedikt full_name: König, Benedikt last_name: König - first_name: Sara S. full_name: Ribeiro, Sara S. last_name: Ribeiro - first_name: Nirnay full_name: Samanta, Nirnay last_name: Samanta - first_name: Klaus full_name: Huber, Klaus id: '237' last_name: Huber - first_name: Simon full_name: Ebbinghaus, Simon last_name: Ebbinghaus citation: ama: Pollak R, Koch L, König B, et al. Cell stress and phase separation stabilize the monomeric state of pseudoisocyanine chloride employed as a self-assembly crowding sensor. Communications Chemistry. 2024;7(1). doi:10.1038/s42004-024-01315-y apa: Pollak, R., Koch, L., König, B., Ribeiro, S. S., Samanta, N., Huber, K., & Ebbinghaus, S. (2024). Cell stress and phase separation stabilize the monomeric state of pseudoisocyanine chloride employed as a self-assembly crowding sensor. Communications Chemistry, 7(1), Article 230. https://doi.org/10.1038/s42004-024-01315-y bibtex: '@article{Pollak_Koch_König_Ribeiro_Samanta_Huber_Ebbinghaus_2024, title={Cell stress and phase separation stabilize the monomeric state of pseudoisocyanine chloride employed as a self-assembly crowding sensor}, volume={7}, DOI={10.1038/s42004-024-01315-y}, number={1230}, journal={Communications Chemistry}, publisher={Springer Science and Business Media LLC}, author={Pollak, Roland and Koch, Leon and König, Benedikt and Ribeiro, Sara S. and Samanta, Nirnay and Huber, Klaus and Ebbinghaus, Simon}, year={2024} }' chicago: Pollak, Roland, Leon Koch, Benedikt König, Sara S. Ribeiro, Nirnay Samanta, Klaus Huber, and Simon Ebbinghaus. “Cell Stress and Phase Separation Stabilize the Monomeric State of Pseudoisocyanine Chloride Employed as a Self-Assembly Crowding Sensor.” Communications Chemistry 7, no. 1 (2024). https://doi.org/10.1038/s42004-024-01315-y. ieee: 'R. Pollak et al., “Cell stress and phase separation stabilize the monomeric state of pseudoisocyanine chloride employed as a self-assembly crowding sensor,” Communications Chemistry, vol. 7, no. 1, Art. no. 230, 2024, doi: 10.1038/s42004-024-01315-y.' mla: Pollak, Roland, et al. “Cell Stress and Phase Separation Stabilize the Monomeric State of Pseudoisocyanine Chloride Employed as a Self-Assembly Crowding Sensor.” Communications Chemistry, vol. 7, no. 1, 230, Springer Science and Business Media LLC, 2024, doi:10.1038/s42004-024-01315-y. short: R. Pollak, L. Koch, B. König, S.S. Ribeiro, N. Samanta, K. Huber, S. Ebbinghaus, Communications Chemistry 7 (2024). date_created: 2025-11-19T09:51:55Z date_updated: 2025-11-19T10:06:01Z department: - _id: '314' doi: 10.1038/s42004-024-01315-y intvolume: ' 7' issue: '1' language: - iso: eng publication: Communications Chemistry publication_identifier: issn: - 2399-3669 publication_status: published publisher: Springer Science and Business Media LLC quality_controlled: '1' status: public title: Cell stress and phase separation stabilize the monomeric state of pseudoisocyanine chloride employed as a self-assembly crowding sensor type: journal_article user_id: '237' volume: 7 year: '2024' ... --- _id: '62252' author: - first_name: Caterina full_name: Alfano, Caterina last_name: Alfano - first_name: Yann full_name: Fichou, Yann last_name: Fichou - first_name: Klaus full_name: Huber, Klaus id: '237' last_name: Huber - first_name: Matthias full_name: Weiss, Matthias last_name: Weiss - first_name: Evan full_name: Spruijt, Evan last_name: Spruijt - first_name: Simon full_name: Ebbinghaus, Simon last_name: Ebbinghaus - first_name: Giuseppe full_name: De Luca, Giuseppe last_name: De Luca - first_name: Maria Agnese full_name: Morando, Maria Agnese last_name: Morando - first_name: Valeria full_name: Vetri, Valeria last_name: Vetri - first_name: Piero Andrea full_name: Temussi, Piero Andrea last_name: Temussi - first_name: Annalisa full_name: Pastore, Annalisa last_name: Pastore citation: ama: 'Alfano C, Fichou Y, Huber K, et al. Molecular Crowding: The History and Development of a Scientific Paradigm. Chemical Reviews. 2024;124(6):3186-3219. doi:10.1021/acs.chemrev.3c00615' apa: 'Alfano, C., Fichou, Y., Huber, K., Weiss, M., Spruijt, E., Ebbinghaus, S., De Luca, G., Morando, M. A., Vetri, V., Temussi, P. A., & Pastore, A. (2024). Molecular Crowding: The History and Development of a Scientific Paradigm. Chemical Reviews, 124(6), 3186–3219. https://doi.org/10.1021/acs.chemrev.3c00615' bibtex: '@article{Alfano_Fichou_Huber_Weiss_Spruijt_Ebbinghaus_De Luca_Morando_Vetri_Temussi_et al._2024, title={Molecular Crowding: The History and Development of a Scientific Paradigm}, volume={124}, DOI={10.1021/acs.chemrev.3c00615}, number={6}, journal={Chemical Reviews}, publisher={American Chemical Society (ACS)}, author={Alfano, Caterina and Fichou, Yann and Huber, Klaus and Weiss, Matthias and Spruijt, Evan and Ebbinghaus, Simon and De Luca, Giuseppe and Morando, Maria Agnese and Vetri, Valeria and Temussi, Piero Andrea and et al.}, year={2024}, pages={3186–3219} }' chicago: 'Alfano, Caterina, Yann Fichou, Klaus Huber, Matthias Weiss, Evan Spruijt, Simon Ebbinghaus, Giuseppe De Luca, et al. “Molecular Crowding: The History and Development of a Scientific Paradigm.” Chemical Reviews 124, no. 6 (2024): 3186–3219. https://doi.org/10.1021/acs.chemrev.3c00615.' ieee: 'C. Alfano et al., “Molecular Crowding: The History and Development of a Scientific Paradigm,” Chemical Reviews, vol. 124, no. 6, pp. 3186–3219, 2024, doi: 10.1021/acs.chemrev.3c00615.' mla: 'Alfano, Caterina, et al. “Molecular Crowding: The History and Development of a Scientific Paradigm.” Chemical Reviews, vol. 124, no. 6, American Chemical Society (ACS), 2024, pp. 3186–219, doi:10.1021/acs.chemrev.3c00615.' short: C. Alfano, Y. Fichou, K. Huber, M. Weiss, E. Spruijt, S. Ebbinghaus, G. De Luca, M.A. Morando, V. Vetri, P.A. Temussi, A. Pastore, Chemical Reviews 124 (2024) 3186–3219. date_created: 2025-11-19T09:46:48Z date_updated: 2025-11-19T10:03:20Z department: - _id: '314' doi: 10.1021/acs.chemrev.3c00615 intvolume: ' 124' issue: '6' language: - iso: eng page: 3186-3219 publication: Chemical Reviews publication_identifier: issn: - 0009-2665 - 1520-6890 publication_status: published publisher: American Chemical Society (ACS) quality_controlled: '1' status: public title: 'Molecular Crowding: The History and Development of a Scientific Paradigm' type: journal_article user_id: '237' volume: 124 year: '2024' ... --- _id: '62251' author: - first_name: Wenke full_name: Müller, Wenke last_name: Müller - first_name: Weronika full_name: Sroka, Weronika last_name: Sroka - first_name: Ralf full_name: Schweins, Ralf last_name: Schweins - first_name: Bernd full_name: Nöcker, Bernd last_name: Nöcker - first_name: Jia-Fei full_name: Poon, Jia-Fei last_name: Poon - first_name: Klaus full_name: Huber, Klaus id: '237' last_name: Huber citation: ama: 'Müller W, Sroka W, Schweins R, Nöcker B, Poon J-F, Huber K. Impact of Additive Hydrophilicity on Mixed Dye-Nonionic Surfactant Micelles: Micelle Morphology and Dye Localization. Langmuir. 2024;40(17):8872-8885. doi:10.1021/acs.langmuir.4c00012' apa: 'Müller, W., Sroka, W., Schweins, R., Nöcker, B., Poon, J.-F., & Huber, K. (2024). Impact of Additive Hydrophilicity on Mixed Dye-Nonionic Surfactant Micelles: Micelle Morphology and Dye Localization. Langmuir, 40(17), 8872–8885. https://doi.org/10.1021/acs.langmuir.4c00012' bibtex: '@article{Müller_Sroka_Schweins_Nöcker_Poon_Huber_2024, title={Impact of Additive Hydrophilicity on Mixed Dye-Nonionic Surfactant Micelles: Micelle Morphology and Dye Localization}, volume={40}, DOI={10.1021/acs.langmuir.4c00012}, number={17}, journal={Langmuir}, publisher={American Chemical Society (ACS)}, author={Müller, Wenke and Sroka, Weronika and Schweins, Ralf and Nöcker, Bernd and Poon, Jia-Fei and Huber, Klaus}, year={2024}, pages={8872–8885} }' chicago: 'Müller, Wenke, Weronika Sroka, Ralf Schweins, Bernd Nöcker, Jia-Fei Poon, and Klaus Huber. “Impact of Additive Hydrophilicity on Mixed Dye-Nonionic Surfactant Micelles: Micelle Morphology and Dye Localization.” Langmuir 40, no. 17 (2024): 8872–85. https://doi.org/10.1021/acs.langmuir.4c00012.' ieee: 'W. Müller, W. Sroka, R. Schweins, B. Nöcker, J.-F. Poon, and K. Huber, “Impact of Additive Hydrophilicity on Mixed Dye-Nonionic Surfactant Micelles: Micelle Morphology and Dye Localization,” Langmuir, vol. 40, no. 17, pp. 8872–8885, 2024, doi: 10.1021/acs.langmuir.4c00012.' mla: 'Müller, Wenke, et al. “Impact of Additive Hydrophilicity on Mixed Dye-Nonionic Surfactant Micelles: Micelle Morphology and Dye Localization.” Langmuir, vol. 40, no. 17, American Chemical Society (ACS), 2024, pp. 8872–85, doi:10.1021/acs.langmuir.4c00012.' short: W. Müller, W. Sroka, R. Schweins, B. Nöcker, J.-F. Poon, K. Huber, Langmuir 40 (2024) 8872–8885. date_created: 2025-11-19T09:45:28Z date_updated: 2025-11-19T10:03:11Z department: - _id: '314' doi: 10.1021/acs.langmuir.4c00012 intvolume: ' 40' issue: '17' language: - iso: eng page: 8872-8885 publication: Langmuir publication_identifier: issn: - 0743-7463 - 1520-5827 publication_status: published publisher: American Chemical Society (ACS) quality_controlled: '1' status: public title: 'Impact of Additive Hydrophilicity on Mixed Dye-Nonionic Surfactant Micelles: Micelle Morphology and Dye Localization' type: journal_article user_id: '237' volume: 40 year: '2024' ... --- _id: '62250' author: - first_name: Sanjib full_name: Saha, Sanjib last_name: Saha - first_name: Anne full_name: Büngeler, Anne last_name: Büngeler - first_name: Dominik full_name: Hense, Dominik last_name: Hense - first_name: Oliver I. full_name: Strube, Oliver I. last_name: Strube - first_name: Klaus full_name: Huber, Klaus id: '237' last_name: Huber citation: ama: Saha S, Büngeler A, Hense D, Strube OI, Huber K. On the Mechanism of Self-Assembly of Fibrinogen in Thrombin-free Aqueous Solution. Langmuir. 2024;40(8):4152-4163. doi:10.1021/acs.langmuir.3c03132 apa: Saha, S., Büngeler, A., Hense, D., Strube, O. I., & Huber, K. (2024). On the Mechanism of Self-Assembly of Fibrinogen in Thrombin-free Aqueous Solution. Langmuir, 40(8), 4152–4163. https://doi.org/10.1021/acs.langmuir.3c03132 bibtex: '@article{Saha_Büngeler_Hense_Strube_Huber_2024, title={On the Mechanism of Self-Assembly of Fibrinogen in Thrombin-free Aqueous Solution}, volume={40}, DOI={10.1021/acs.langmuir.3c03132}, number={8}, journal={Langmuir}, publisher={American Chemical Society (ACS)}, author={Saha, Sanjib and Büngeler, Anne and Hense, Dominik and Strube, Oliver I. and Huber, Klaus}, year={2024}, pages={4152–4163} }' chicago: 'Saha, Sanjib, Anne Büngeler, Dominik Hense, Oliver I. Strube, and Klaus Huber. “On the Mechanism of Self-Assembly of Fibrinogen in Thrombin-Free Aqueous Solution.” Langmuir 40, no. 8 (2024): 4152–63. https://doi.org/10.1021/acs.langmuir.3c03132.' ieee: 'S. Saha, A. Büngeler, D. Hense, O. I. Strube, and K. Huber, “On the Mechanism of Self-Assembly of Fibrinogen in Thrombin-free Aqueous Solution,” Langmuir, vol. 40, no. 8, pp. 4152–4163, 2024, doi: 10.1021/acs.langmuir.3c03132.' mla: Saha, Sanjib, et al. “On the Mechanism of Self-Assembly of Fibrinogen in Thrombin-Free Aqueous Solution.” Langmuir, vol. 40, no. 8, American Chemical Society (ACS), 2024, pp. 4152–63, doi:10.1021/acs.langmuir.3c03132. short: S. Saha, A. Büngeler, D. Hense, O.I. Strube, K. Huber, Langmuir 40 (2024) 4152–4163. date_created: 2025-11-19T09:43:04Z date_updated: 2025-11-19T10:02:48Z department: - _id: '314' doi: 10.1021/acs.langmuir.3c03132 intvolume: ' 40' issue: '8' language: - iso: eng page: 4152-4163 publication: Langmuir publication_identifier: issn: - 0743-7463 - 1520-5827 publication_status: published publisher: American Chemical Society (ACS) quality_controlled: '1' status: public title: On the Mechanism of Self-Assembly of Fibrinogen in Thrombin-free Aqueous Solution type: journal_article user_id: '237' volume: 40 year: '2024' ... --- _id: '62254' author: - first_name: Leon full_name: Koch, Leon last_name: Koch - first_name: Sanjib full_name: Saha, Sanjib last_name: Saha - first_name: Klaus full_name: Huber, Klaus id: '237' last_name: Huber citation: ama: Koch L, Saha S, Huber K. Impact of Temperature on the Self-Assembly of Fibrinogen in Thrombin-Free Solutions. The Journal of Physical Chemistry Letters. 2024;15(39):9987-9993. doi:10.1021/acs.jpclett.4c02180 apa: Koch, L., Saha, S., & Huber, K. (2024). Impact of Temperature on the Self-Assembly of Fibrinogen in Thrombin-Free Solutions. The Journal of Physical Chemistry Letters, 15(39), 9987–9993. https://doi.org/10.1021/acs.jpclett.4c02180 bibtex: '@article{Koch_Saha_Huber_2024, title={Impact of Temperature on the Self-Assembly of Fibrinogen in Thrombin-Free Solutions}, volume={15}, DOI={10.1021/acs.jpclett.4c02180}, number={39}, journal={The Journal of Physical Chemistry Letters}, publisher={American Chemical Society (ACS)}, author={Koch, Leon and Saha, Sanjib and Huber, Klaus}, year={2024}, pages={9987–9993} }' chicago: 'Koch, Leon, Sanjib Saha, and Klaus Huber. “Impact of Temperature on the Self-Assembly of Fibrinogen in Thrombin-Free Solutions.” The Journal of Physical Chemistry Letters 15, no. 39 (2024): 9987–93. https://doi.org/10.1021/acs.jpclett.4c02180.' ieee: 'L. Koch, S. Saha, and K. Huber, “Impact of Temperature on the Self-Assembly of Fibrinogen in Thrombin-Free Solutions,” The Journal of Physical Chemistry Letters, vol. 15, no. 39, pp. 9987–9993, 2024, doi: 10.1021/acs.jpclett.4c02180.' mla: Koch, Leon, et al. “Impact of Temperature on the Self-Assembly of Fibrinogen in Thrombin-Free Solutions.” The Journal of Physical Chemistry Letters, vol. 15, no. 39, American Chemical Society (ACS), 2024, pp. 9987–93, doi:10.1021/acs.jpclett.4c02180. short: L. Koch, S. Saha, K. Huber, The Journal of Physical Chemistry Letters 15 (2024) 9987–9993. date_created: 2025-11-19T09:50:43Z date_updated: 2025-11-19T10:05:50Z department: - _id: '314' doi: 10.1021/acs.jpclett.4c02180 intvolume: ' 15' issue: '39' language: - iso: eng page: 9987-9993 publication: The Journal of Physical Chemistry Letters publication_identifier: issn: - 1948-7185 - 1948-7185 publication_status: published publisher: American Chemical Society (ACS) quality_controlled: '1' status: public title: Impact of Temperature on the Self-Assembly of Fibrinogen in Thrombin-Free Solutions type: journal_article user_id: '237' volume: 15 year: '2024' ...