---
_id: '54966'
abstract:
- lang: eng
text: Piezoresponse force microscopy (PFM) is one of the most widespread methods
for investigating and visualizing ferroelectric domain structures down to the
nanometer length scale. PFM makes use of the direct coupling of the piezoelectric
response to the crystal lattice, and hence, it is most often applied to spatially
map the three-dimensional (3D) near-surface domain distribution of any polar or
ferroic sample. Nonetheless, since most samples investigated by PFM are at least
semiconducting or fully insulating, the electric ac field emerging from the conductive
scanning force microscopy (SFM) tip penetrates the sample and, hence, may also
couple to polar features that are deeply buried into the bulk of the sample under
investigation. Thus, in the work presented here, we experimentally and theoretically
explore the contrast and depth resolution capabilities of PFM, by analyzing the
dependence of several key parameters. These key parameters include the depth of
the buried feature, i.e., here a domain wall (DW), as well as PFM-relevant technical
parameters such as the tip radius, the PFM drive voltage and frequency, and the
signal-to-noise ratio. The theoretical predictions are experimentally verified
using x-cut periodically poled lithium niobate single crystals that are specially
prepared into wedge-shaped samples, in order to allow the buried feature, here
the DW, to be “positioned” at any depth into the bulk. This inspection essentially
contributes to the fundamental understanding in PFM contrast analysis and to the
reconstruction of 3D domain structures down to a 1 μm-penetration depth into the
sample.
article_type: original
author:
- first_name: Matthias
full_name: Roeper, Matthias
last_name: Roeper
- first_name: Samuel D.
full_name: Seddon, Samuel D.
last_name: Seddon
- first_name: Zeeshan H.
full_name: Amber, Zeeshan H.
last_name: Amber
- first_name: Michael
full_name: Rüsing, Michael
id: '22501'
last_name: Rüsing
orcid: 0000-0003-4682-4577
- first_name: Lukas M.
full_name: Eng, Lukas M.
last_name: Eng
citation:
ama: Roeper M, Seddon SD, Amber ZH, Rüsing M, Eng LM. Depth resolution in piezoresponse
force microscopy. Journal of Applied Physics. 2024;135(22). doi:10.1063/5.0206784
apa: Roeper, M., Seddon, S. D., Amber, Z. H., Rüsing, M., & Eng, L. M. (2024).
Depth resolution in piezoresponse force microscopy. Journal of Applied Physics,
135(22). https://doi.org/10.1063/5.0206784
bibtex: '@article{Roeper_Seddon_Amber_Rüsing_Eng_2024, title={Depth resolution in
piezoresponse force microscopy}, volume={135}, DOI={10.1063/5.0206784},
number={22}, journal={Journal of Applied Physics}, publisher={AIP Publishing},
author={Roeper, Matthias and Seddon, Samuel D. and Amber, Zeeshan H. and Rüsing,
Michael and Eng, Lukas M.}, year={2024} }'
chicago: Roeper, Matthias, Samuel D. Seddon, Zeeshan H. Amber, Michael Rüsing, and
Lukas M. Eng. “Depth Resolution in Piezoresponse Force Microscopy.” Journal
of Applied Physics 135, no. 22 (2024). https://doi.org/10.1063/5.0206784.
ieee: 'M. Roeper, S. D. Seddon, Z. H. Amber, M. Rüsing, and L. M. Eng, “Depth resolution
in piezoresponse force microscopy,” Journal of Applied Physics, vol. 135,
no. 22, 2024, doi: 10.1063/5.0206784.'
mla: Roeper, Matthias, et al. “Depth Resolution in Piezoresponse Force Microscopy.”
Journal of Applied Physics, vol. 135, no. 22, AIP Publishing, 2024, doi:10.1063/5.0206784.
short: M. Roeper, S.D. Seddon, Z.H. Amber, M. Rüsing, L.M. Eng, Journal of Applied
Physics 135 (2024).
date_created: 2024-07-01T21:00:43Z
date_updated: 2025-04-03T12:35:34Z
department:
- _id: '15'
- _id: '169'
- _id: '288'
- _id: '623'
doi: 10.1063/5.0206784
intvolume: ' 135'
issue: '22'
keyword:
- Ferroelectrics
- lithium niobate
- piezoresponse force microscopy
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://doi.org/10.1063/5.0206784
oa: '1'
publication: Journal of Applied Physics
publication_identifier:
issn:
- 0021-8979
- 1089-7550
publication_status: published
publisher: AIP Publishing
quality_controlled: '1'
status: public
title: Depth resolution in piezoresponse force microscopy
type: journal_article
user_id: '22501'
volume: 135
year: '2024'
...
---
_id: '54303'
author:
- first_name: Nils Tobias
full_name: Böer, Nils Tobias
id: '52000'
last_name: Böer
orcid: 0000-0002-0236-7282
- first_name: Iris
full_name: Güldenpenning, Iris
id: '52931'
last_name: Güldenpenning
orcid: 0000-0003-0549-5543
- first_name: Matthias
full_name: Weigelt, Matthias
id: '36388'
last_name: Weigelt
citation:
ama: 'Böer NT, Güldenpenning I, Weigelt M. The influence of effort instruction on
fake production costs in basketball novices and experienced basketball players.
In: Koester D, Krämer L, Fuhlert L, Everding J, Weilharter F, Marlovits A, eds.
56. Jahrestagung Der Arbeitsgemeinschaft Für Sportpsychologie (ASP). ;
2024:119.'
apa: Böer, N. T., Güldenpenning, I., & Weigelt, M. (2024). The influence of
effort instruction on fake production costs in basketball novices and experienced
basketball players. In D. Koester, L. Krämer, L. Fuhlert, J. Everding, F. Weilharter,
& A. Marlovits (Eds.), 56. Jahrestagung der Arbeitsgemeinschaft für Sportpsychologie
(ASP) (p. 119).
bibtex: '@inproceedings{Böer_Güldenpenning_Weigelt_2024, place={Berlin}, title={The
influence of effort instruction on fake production costs in basketball novices
and experienced basketball players.}, booktitle={56. Jahrestagung der Arbeitsgemeinschaft
für Sportpsychologie (ASP)}, author={Böer, Nils Tobias and Güldenpenning, Iris
and Weigelt, Matthias}, editor={Koester, Dirk and Krämer, Lina and Fuhlert, Leonhard
and Everding, Jannik and Weilharter, Fritz and Marlovits, Andreas}, year={2024},
pages={119} }'
chicago: Böer, Nils Tobias, Iris Güldenpenning, and Matthias Weigelt. “The Influence
of Effort Instruction on Fake Production Costs in Basketball Novices and Experienced
Basketball Players.” In 56. Jahrestagung Der Arbeitsgemeinschaft Für Sportpsychologie
(ASP), edited by Dirk Koester, Lina Krämer, Leonhard Fuhlert, Jannik Everding,
Fritz Weilharter, and Andreas Marlovits, 119. Berlin, 2024.
ieee: N. T. Böer, I. Güldenpenning, and M. Weigelt, “The influence of effort instruction
on fake production costs in basketball novices and experienced basketball players.,”
in 56. Jahrestagung der Arbeitsgemeinschaft für Sportpsychologie (ASP),
Berlin, 2024, p. 119.
mla: Böer, Nils Tobias, et al. “The Influence of Effort Instruction on Fake Production
Costs in Basketball Novices and Experienced Basketball Players.” 56. Jahrestagung
Der Arbeitsgemeinschaft Für Sportpsychologie (ASP), edited by Dirk Koester
et al., 2024, p. 119.
short: 'N.T. Böer, I. Güldenpenning, M. Weigelt, in: D. Koester, L. Krämer, L. Fuhlert,
J. Everding, F. Weilharter, A. Marlovits (Eds.), 56. Jahrestagung Der Arbeitsgemeinschaft
Für Sportpsychologie (ASP), Berlin, 2024, p. 119.'
conference:
end_date: 2024-05-11
location: Berlin
name: 56. Jahrestagung der Arbeitsgemeinschaft für Sportpsychologie (ASP)
start_date: 2024-05-09
date_created: 2024-05-16T09:33:09Z
date_updated: 2025-04-03T10:29:11Z
ddc:
- '150'
department:
- _id: '17'
- _id: '266'
editor:
- first_name: Dirk
full_name: Koester, Dirk
last_name: Koester
- first_name: Lina
full_name: Krämer, Lina
last_name: Krämer
- first_name: Leonhard
full_name: Fuhlert, Leonhard
last_name: Fuhlert
- first_name: Jannik
full_name: Everding, Jannik
last_name: Everding
- first_name: Fritz
full_name: Weilharter, Fritz
last_name: Weilharter
- first_name: Andreas
full_name: Marlovits, Andreas
last_name: Marlovits
file:
- access_level: open_access
content_type: application/pdf
creator: nboeer
date_created: 2024-11-29T11:16:33Z
date_updated: 2025-04-03T10:29:10Z
file_id: '57507'
file_name: asp2024 Böer et al.pdf
file_size: 108251
relation: main_file
file_date_updated: 2025-04-03T10:29:10Z
has_accepted_license: '1'
language:
- iso: eng
oa: '1'
page: '119'
place: Berlin
publication: 56. Jahrestagung der Arbeitsgemeinschaft für Sportpsychologie (ASP)
quality_controlled: '1'
status: public
title: The influence of effort instruction on fake production costs in basketball
novices and experienced basketball players.
type: conference_abstract
user_id: '52000'
year: '2024'
...
---
_id: '48486'
abstract:
- lang: eng
text: AbstractIntroductionIn
Europe, most Internet searches for school‐related tasks are situated at home,
where parents can support adolescents. Although the frequency (quantity) of parental
support has already been analyzed, a research gap exists concerning the quality
of parental support in adolescents' information‐related Internet use. The quality
of parental support in the field of homework involvement is known to be a predictor
of adolescents' learning motivation and academic achievement, often discussed
with regard to self‐determination theory (SDT) in terms of autonomy support, structure,
emotional support, and control. These categories were adapted in this study to
analyze parents' support in adolescents' Internet searching activities.MethodsUsing
a mixed‐methods approach, we combined quantitative questionnaires and qualitative
observations to analyze joint information‐related Internet uses. Therefore, 243
parent–adolescent dyads were surveyed and six parent–adolescent dyads were observed
by videography in 2019/2020 in Germany. The adolescents were 11 years old, on
average.ResultsThe
parents rated all qualities higher than the adolescents. Emotional support was
rated highest by both groups, whereas structure was rated lowest. Adolescents' and
parents' view on parental support differ. The qualitative study revealed parents' often
interfering behavior, whereas emotional support was low. Further, the active role
of adolescents was highlighted in both quantitative and qualitative data.ConclusionsBy
combining quantitative and qualitative approaches, we demonstrated a fruitful
application of SDT in analyzing the quality of parental support during adolescents' Internet
searches at home and shed light on the co‐construction of joint Internet searches.
author:
- first_name: Ricarda
full_name: Kurock, Ricarda
id: '78797'
last_name: Kurock
- first_name: Jeannine
full_name: Teichert, Jeannine
id: '83055'
last_name: Teichert
orcid: 0000-0002-7571-891X
- first_name: Dorothee M.
full_name: Meister, Dorothee M.
id: '346'
last_name: Meister
orcid: orcid.org/0000-0002-9685-4988
- first_name: Lara
full_name: Gerhardts, Lara
last_name: Gerhardts
- first_name: Heike M.
full_name: Buhl, Heike M.
id: '27152'
last_name: Buhl
- first_name: Sabrina
full_name: Bonanati, Sabrina
last_name: Bonanati
citation:
ama: Kurock R, Teichert J, Meister DM, Gerhardts L, Buhl HM, Bonanati S. A mixed‐methods study
of the quality of parental support during adolescents’ information‐related Internet
use as a co‐construction process. Journal of Adolescence. 2024;96(3):566-579.
doi:http://dx.doi.org/10.1002/jad.12264
apa: Kurock, R., Teichert, J., Meister, D. M., Gerhardts, L., Buhl, H. M., &
Bonanati, S. (2024). A mixed‐methods study of the quality of parental support
during adolescents’ information‐related Internet use as a co‐construction process.
Journal of Adolescence, 96(3), 566–579. http://dx.doi.org/10.1002/jad.12264
bibtex: '@article{Kurock_Teichert_Meister_Gerhardts_Buhl_Bonanati_2024, title={A
mixed‐methods study of the quality of parental support during adolescents’ information‐related
Internet use as a co‐construction process}, volume={96}, DOI={http://dx.doi.org/10.1002/jad.12264},
number={3}, journal={Journal of Adolescence}, publisher={Wiley}, author={Kurock,
Ricarda and Teichert, Jeannine and Meister, Dorothee M. and Gerhardts, Lara and
Buhl, Heike M. and Bonanati, Sabrina}, year={2024}, pages={566–579} }'
chicago: 'Kurock, Ricarda, Jeannine Teichert, Dorothee M. Meister, Lara Gerhardts,
Heike M. Buhl, and Sabrina Bonanati. “A Mixed‐methods Study of the Quality of
Parental Support during Adolescents’ Information‐related Internet Use as a Co‐construction
Process.” Journal of Adolescence 96, no. 3 (2024): 566–79. http://dx.doi.org/10.1002/jad.12264.'
ieee: 'R. Kurock, J. Teichert, D. M. Meister, L. Gerhardts, H. M. Buhl, and S. Bonanati,
“A mixed‐methods study of the quality of parental support during adolescents’ information‐related
Internet use as a co‐construction process,” Journal of Adolescence, vol.
96, no. 3, pp. 566–579, 2024, doi: http://dx.doi.org/10.1002/jad.12264.'
mla: Kurock, Ricarda, et al. “A Mixed‐methods Study of the Quality of Parental Support
during Adolescents’ Information‐related Internet Use as a Co‐construction Process.”
Journal of Adolescence, vol. 96, no. 3, Wiley, 2024, pp. 566–79, doi:http://dx.doi.org/10.1002/jad.12264.
short: R. Kurock, J. Teichert, D.M. Meister, L. Gerhardts, H.M. Buhl, S. Bonanati,
Journal of Adolescence 96 (2024) 566–579.
date_created: 2023-10-26T12:01:24Z
date_updated: 2025-07-03T09:06:39Z
department:
- _id: '427'
- _id: '137'
doi: http://dx.doi.org/10.1002/jad.12264
intvolume: ' 96'
issue: '3'
keyword:
- Psychiatry and Mental health
- Developmental and Educational Psychology
- Social Psychology
- Pediatrics
- Perinatology and Child Health
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://onlinelibrary.wiley.com/doi/10.1002/jad.12264
oa: '1'
page: 566-579
project:
- _id: '378'
grant_number: 01JD1814A
name: 'DigHomE: DigHomE: Digital Home Learning Environment – Gelingensbedingungen
elterlicher Unterstützung bei der informationsorientierten Internetnutzung'
publication: Journal of Adolescence
publication_identifier:
issn:
- 0140-1971
- 1095-9254
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: A mixed‐methods study of the quality of parental support during adolescents' information‐related
Internet use as a co‐construction process
type: journal_article
user_id: '83055'
volume: 96
year: '2024'
...
---
_id: '57593'
abstract:
- lang: eng
text: "Between Dethematizing and Demonetisation: The Holocaust in depictions of
National-Socialism and World War Two on YouTube – In September 2018, an ambitious
\r\nand highly noteworthy project for the construction and distribution of a broad-reaching
portrayal of 20th-century violence in the digital age was launched: the YouTube
\r\nchannel World War Two (WW2). Their mission was to present the experiences
of \r\nthose who lived through the war in a radically objective, apolitical, and
detailed \r\nmanner. The main series, sharing the same title as the channel, focused
on military \r\nevents, while another series titled War Against Humanity (WAH)
would address \r\nwar crimes, human rights abuses, the mass murder of civilians
and prisoners of \r\nwar, Nazi euthanasia crimes, and the Holocaust. This division
of the narrative into \r\na military history (main series) and a separate history
of war crimes and the Holocaust (side series) raises important questions about
the conditions, opportunities, \r\nand limitations that YouTube’s media and economic
structures impose on the portrayal of war, mass violence, and genocide. The paper
also examines how these \r\nstructures influence the narrative and shape the presented
historical image, and \r\nwhat consequences arise for the depiction of war and
history from an academic perspective. Lastly, it explores the reasons behind this
narrative split: whether it was \r\na deliberate decision to systematically differentiate
the storytelling or a strategic \r\nmove shaped by YouTube’s media and economic
constraints. The question arises: \r\nto what extent can historical education
on digital platforms like YouTube, driven \r\nby the need for content monetization,
still align closely with academic standards?"
article_type: original
author:
- first_name: Julia
full_name: Quast, Julia
id: '102451'
last_name: Quast
citation:
ama: Quast J. Zwischen Dethematisierung und Demonetarisierung Der Holocaust in
Darstellungen von NS und Zweitem Weltkrieg auf YouTube. Zeitschrift für Genozidforschung.
2024;22(2):264-291.
apa: Quast, J. (2024). Zwischen Dethematisierung und Demonetarisierung Der Holocaust
in Darstellungen von NS und Zweitem Weltkrieg auf YouTube. Zeitschrift für
Genozidforschung, 22(2), 264–291.
bibtex: '@article{Quast_2024, title={Zwischen Dethematisierung und Demonetarisierung
Der Holocaust in Darstellungen von NS und Zweitem Weltkrieg auf YouTube}, volume={22},
number={2}, journal={Zeitschrift für Genozidforschung}, publisher={Velbrück },
author={Quast, Julia}, year={2024}, pages={264–291} }'
chicago: 'Quast, Julia. “Zwischen Dethematisierung und Demonetarisierung Der Holocaust
in Darstellungen von NS und Zweitem Weltkrieg auf YouTube.” Zeitschrift für
Genozidforschung 22, no. 2 (2024): 264–91.'
ieee: J. Quast, “Zwischen Dethematisierung und Demonetarisierung Der Holocaust
in Darstellungen von NS und Zweitem Weltkrieg auf YouTube,” Zeitschrift für
Genozidforschung, vol. 22, no. 2, pp. 264–291, 2024.
mla: Quast, Julia. “Zwischen Dethematisierung und Demonetarisierung Der Holocaust
in Darstellungen von NS und Zweitem Weltkrieg auf YouTube.” Zeitschrift für
Genozidforschung, vol. 22, no. 2, Velbrück , 2024, pp. 264–91.
short: J. Quast, Zeitschrift für Genozidforschung 22 (2024) 264–291.
date_created: 2024-12-05T13:08:48Z
date_updated: 2025-07-04T18:36:43Z
department:
- _id: '6'
intvolume: ' 22'
issue: '2'
keyword:
- Zweiter Weltkrieg
- Holocaust
- Geschichtsbild
- Public History
- Social Media
- YouTube
- Erinnerungskultur
language:
- iso: ger
page: 264-291
project:
- _id: '1273'
name: Der Zweite Weltkrieg und seine (Un-)Vermarktbarkeit
publication: Zeitschrift für Genozidforschung
publication_status: published
publisher: 'Velbrück '
quality_controlled: '1'
status: public
title: Zwischen Dethematisierung und Demonetarisierung Der Holocaust in Darstellungen
von NS und Zweitem Weltkrieg auf YouTube
type: journal_article
user_id: '102451'
volume: 22
year: '2024'
...
---
_id: '52328'
abstract:
- lang: ger
text: In der Professionalisierung von Lehrkräften ist die Selbst-reflexion eine
wesentliche Voraussetzung, da sie zentral für die Weiterentwicklung der eigenen
Kompetenzen ist. Daraus ergibt sich die Notwendigkeit, bereits in der ersten Phase
der Lehrkräftebildung die Selbstreflexion und die Weiterentwicklungsorientierung
zu fördern. Hierzu sind auf Grund des sozialen Settings gezielte reflexionsorientierte
Workshops chancenreich. Um die Effekte von reflexionsorientierten Workshops und
dabei den Zusammenhang zwischen der Selbst-reflexion und der Weiterentwicklungsorientierung
zu überprüfen, wurden anhand einer Stichprobe von N = 646 Lehramtsstudierenden
die Entwicklung der Selbst-reflexion und Weiterentwicklungsorientierung beim Besuch
von Workshops zu überfachlichen Kompetenzen untersucht. Die Datenerhebung erfolgte
vor, direkt nach und erneut vier bis sechs Wochen nach den reflexionsorientierten
Workshops mittels eines Fragebogens. Durch Varianzanalysen können in Bezug auf
die Selbst-reflexion direkt nach den Workshops signifikante Effekte sowie eine
konstante Ausprägung vier bis sechs Wochen später nachgewiesen werden. Weiterhin
konnte ein signifikanter Anstieg bei der Weiterentwicklungsorientierung über die
drei Messzeitpunkte verzeichnet werden. Ebenso zeigte sich ein positiver Effekt
der Selbstreflexion auf den Anstieg der Weiterentwicklungsorientierung.
author:
- first_name: Sabrina M
full_name: Kleine, Sabrina M
last_name: Kleine
- first_name: Sylvia
full_name: Sohlau, Sylvia
last_name: Sohlau
- first_name: Andreas
full_name: Seifert, Andreas
id: '693'
last_name: Seifert
- first_name: Heike M.
full_name: Buhl, Heike M.
id: '27152'
last_name: Buhl
citation:
ama: Kleine SM, Sohlau S, Seifert A, Buhl HM. Förderung der Selbstreflexion und
Weiterentwicklungsorientierung durch reflexionsorientierte Workshops im Lehramtsstudium.
Herausforderung Lehrer*innenbildung - Zeitschrift zur Konzeption, Gestaltung
und Diskussion. 2024;7(1). doi:10.11576/HLZ-6392
apa: Kleine, S. M., Sohlau, S., Seifert, A., & Buhl, H. M. (2024). Förderung
der Selbstreflexion und Weiterentwicklungsorientierung durch reflexionsorientierte
Workshops im Lehramtsstudium. Herausforderung Lehrer*innenbildung - Zeitschrift
zur Konzeption, Gestaltung und Diskussion, 7(1). https://doi.org/10.11576/HLZ-6392
bibtex: '@article{Kleine_Sohlau_Seifert_Buhl_2024, title={Förderung der Selbstreflexion
und Weiterentwicklungsorientierung durch reflexionsorientierte Workshops im Lehramtsstudium},
volume={7}, DOI={10.11576/HLZ-6392},
number={1}, journal={Herausforderung Lehrer*innenbildung - Zeitschrift zur Konzeption,
Gestaltung und Diskussion}, author={Kleine, Sabrina M and Sohlau, Sylvia and Seifert,
Andreas and Buhl, Heike M.}, year={2024} }'
chicago: Kleine, Sabrina M, Sylvia Sohlau, Andreas Seifert, and Heike M. Buhl. “Förderung
der Selbstreflexion und Weiterentwicklungsorientierung durch reflexionsorientierte
Workshops im Lehramtsstudium.” Herausforderung Lehrer*innenbildung - Zeitschrift
zur Konzeption, Gestaltung und Diskussion 7, no. 1 (2024). https://doi.org/10.11576/HLZ-6392.
ieee: 'S. M. Kleine, S. Sohlau, A. Seifert, and H. M. Buhl, “Förderung der Selbstreflexion
und Weiterentwicklungsorientierung durch reflexionsorientierte Workshops im Lehramtsstudium,”
Herausforderung Lehrer*innenbildung - Zeitschrift zur Konzeption, Gestaltung
und Diskussion, vol. 7, no. 1, 2024, doi: 10.11576/HLZ-6392.'
mla: Kleine, Sabrina M., et al. “Förderung der Selbstreflexion und Weiterentwicklungsorientierung
durch reflexionsorientierte Workshops im Lehramtsstudium.” Herausforderung
Lehrer*innenbildung - Zeitschrift zur Konzeption, Gestaltung und Diskussion,
vol. 7, no. 1, 2024, doi:10.11576/HLZ-6392.
short: S.M. Kleine, S. Sohlau, A. Seifert, H.M. Buhl, Herausforderung Lehrer*innenbildung
- Zeitschrift zur Konzeption, Gestaltung und Diskussion 7 (2024).
date_created: 2024-03-06T09:26:12Z
date_updated: 2025-07-16T08:19:13Z
doi: 10.11576/HLZ-6392
intvolume: ' 7'
issue: '1'
language:
- iso: ger
main_file_link:
- open_access: '1'
url: https://www.herausforderung-lehrerinnenbildung.de/index.php/hlz/article/view/6392/6311
oa: '1'
project:
- _id: '377'
name: 'LehramtsNavi: Weiterentwicklungsorientiertes Self-Assessment am Übergang
zum Lehramtsstudium'
publication: Herausforderung Lehrer*innenbildung - Zeitschrift zur Konzeption, Gestaltung
und Diskussion
publication_status: published
quality_controlled: '1'
status: public
title: Förderung der Selbstreflexion und Weiterentwicklungsorientierung durch reflexionsorientierte
Workshops im Lehramtsstudium
type: journal_article
user_id: '27152'
volume: 7
year: '2024'
...
---
_id: '58899'
author:
- first_name: Sara
full_name: Rezat, Sara
id: '58338'
last_name: Rezat
- first_name: Maja
full_name: Stahl, Maja
last_name: Stahl
- first_name: Nadine
full_name: Michel, Nadine
id: '47857'
last_name: Michel
- first_name: Sebastian
full_name: Kilsbach, Sebastian
id: '93839'
last_name: Kilsbach
- first_name: Julian
full_name: Schmidtke, Julian
last_name: Schmidtke
- first_name: Henning
full_name: Wachsmuth, Henning
last_name: Wachsmuth
citation:
ama: 'Rezat S, Stahl M, Michel N, Kilsbach S, Schmidtke J, Wachsmuth H. A School
Student Essay Corpus for Analyzing Interactions of Argumentative Structure and
Quality. In: ; 2024. doi:https://doi.org/10.48550/arXiv.2404.02529
'
apa: Rezat, S., Stahl, M., Michel, N., Kilsbach, S., Schmidtke, J., & Wachsmuth,
H. (2024). A School Student Essay Corpus for Analyzing Interactions of Argumentative
Structure and Quality. https://doi.org/10.48550/arXiv.2404.02529
bibtex: '@inproceedings{Rezat_Stahl_Michel_Kilsbach_Schmidtke_Wachsmuth_2024, title={A
School Student Essay Corpus for Analyzing Interactions of Argumentative Structure
and Quality.}, DOI={https://doi.org/10.48550/arXiv.2404.02529
}, author={Rezat, Sara and Stahl, Maja and Michel, Nadine and Kilsbach, Sebastian
and Schmidtke, Julian and Wachsmuth, Henning}, year={2024} }'
chicago: Rezat, Sara, Maja Stahl, Nadine Michel, Sebastian Kilsbach, Julian Schmidtke,
and Henning Wachsmuth. “A School Student Essay Corpus for Analyzing Interactions
of Argumentative Structure and Quality.,” 2024. https://doi.org/10.48550/arXiv.2404.02529 .
ieee: 'S. Rezat, M. Stahl, N. Michel, S. Kilsbach, J. Schmidtke, and H. Wachsmuth,
“A School Student Essay Corpus for Analyzing Interactions of Argumentative Structure
and Quality.,” 2024, doi: https://doi.org/10.48550/arXiv.2404.02529
.'
mla: Rezat, Sara, et al. A School Student Essay Corpus for Analyzing Interactions
of Argumentative Structure and Quality. 2024, doi:https://doi.org/10.48550/arXiv.2404.02529 .
short: 'S. Rezat, M. Stahl, N. Michel, S. Kilsbach, J. Schmidtke, H. Wachsmuth,
in: 2024.'
date_created: 2025-03-04T08:55:40Z
date_updated: 2025-07-21T06:29:56Z
doi: 'https://doi.org/10.48550/arXiv.2404.02529 '
language:
- iso: eng
main_file_link:
- open_access: '1'
url: 'https://doi.org/10.48550/arXiv.2404.02529 '
oa: '1'
project:
- _id: '646'
grant_number: '453073654'
name: 'ArgSchool: Computergestütztes Lernen argumentativen Schreibens in der digitalen
Schulbildung (DFG)'
quality_controlled: '1'
status: public
title: A School Student Essay Corpus for Analyzing Interactions of Argumentative Structure
and Quality.
type: conference
user_id: '47857'
year: '2024'
...
---
_id: '57102'
author:
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: Dominik
full_name: Wiechel, Dominik
id: '67161'
last_name: Wiechel
- first_name: Sven
full_name: Rarbach, Sven
id: '67999'
last_name: Rarbach
citation:
ama: 'Gräßler I, Wiechel D, Rarbach S. Model-based impact analysis in dynamic System
of Systems. In: Procedia CIRP. Vol 128. Elsevier BV; 2024:585-5D. doi:10.1016/j.procir.2024.06.032'
apa: Gräßler, I., Wiechel, D., & Rarbach, S. (2024). Model-based impact analysis
in dynamic System of Systems. Procedia CIRP, 128, 585-5D. https://doi.org/10.1016/j.procir.2024.06.032
bibtex: '@inproceedings{Gräßler_Wiechel_Rarbach_2024, title={Model-based impact
analysis in dynamic System of Systems}, volume={128}, DOI={10.1016/j.procir.2024.06.032},
booktitle={Procedia CIRP}, publisher={Elsevier BV}, author={Gräßler, Iris and
Wiechel, Dominik and Rarbach, Sven}, year={2024}, pages={585–5D} }'
chicago: Gräßler, Iris, Dominik Wiechel, and Sven Rarbach. “Model-Based Impact Analysis
in Dynamic System of Systems.” In Procedia CIRP, 128:585-5D. Elsevier BV,
2024. https://doi.org/10.1016/j.procir.2024.06.032.
ieee: 'I. Gräßler, D. Wiechel, and S. Rarbach, “Model-based impact analysis in dynamic
System of Systems,” in Procedia CIRP, Cranfield, UK, 2024, vol. 128, pp.
585–5D, doi: 10.1016/j.procir.2024.06.032.'
mla: Gräßler, Iris, et al. “Model-Based Impact Analysis in Dynamic System of Systems.”
Procedia CIRP, vol. 128, Elsevier BV, 2024, pp. 585-5D, doi:10.1016/j.procir.2024.06.032.
short: 'I. Gräßler, D. Wiechel, S. Rarbach, in: Procedia CIRP, Elsevier BV, 2024,
pp. 585–5D.'
conference:
end_date: 2024-06-05
location: Cranfield, UK
name: ' 34th CIRP Design Conference'
start_date: 2024-06-03
date_created: 2024-11-15T07:39:58Z
date_updated: 2025-08-30T11:03:08Z
department:
- _id: '152'
doi: 10.1016/j.procir.2024.06.032
intvolume: ' 128'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.sciencedirect.com/science/article/pii/S2212827124007133/pdf?md5=baf7db67591ba84f3da11a126c299ee8&pid=1-s2.0-S2212827124007133-main.pdf
oa: '1'
page: 585-5D
publication: Procedia CIRP
publication_identifier:
issn:
- 2212-8271
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Model-based impact analysis in dynamic System of Systems
type: conference
user_id: '67999'
volume: 128
year: '2024'
...
---
_id: '54925'
abstract:
- lang: eng
text: "The OPEN Edirom project is developing a digital edition of incidental music
for Goethe’s play Faust, representing an innovative initiative within the realm
of music philology and MEI/TEI edition. Embracing the \"data first\" principle,
OPEN Edirom prioritizes making its content openly accessible, thereby enabling
diverse potential uses for researchers and performers. Our aim involves presenting
the scholarly text and music edition in its entirety, incorporating its various
forms of data, i.e. music, texts, source images, metadata, and annotations, all
displayed with Edirom software.\r\nThe piece we edit in this project is Goethe’s
renowned play Faust I, as adapted by Carl Seydelmann, along with the corresponding
music composed by Peter Joseph von Lindpaintner for the Court Theatre in Stuttgart.
The work premiered in 1832.\r\nThis paper delves into the concept of music edition
as open data publication and delineates its advantages over analog and hybrid
editions in terms of reusability and alignment with the FAIR principles. It also
addresses the challenges encountered in data preparation, both specific to incidental
music and in general data processing. Furthermore, we propose solutions and recommendations
for similar projects based on our insights."
author:
- first_name: Lena
full_name: Frömmel, Lena
id: '86796'
last_name: Frömmel
orcid: 0009-0009-6539-7081
- first_name: Tobias
full_name: Bachmann, Tobias
last_name: Bachmann
- first_name: Anna Viktoria Katrin
full_name: Plaksin, Anna Viktoria Katrin
id: '102981'
last_name: Plaksin
orcid: 0000-0002-9969-0608
- first_name: Andreas
full_name: Münzmay, Andreas
id: '61139'
last_name: Münzmay
orcid: 0000-0002-8373-4055
citation:
ama: 'Frömmel L, Bachmann T, Plaksin AVK, Münzmay A. Open Edirom: From hybrid music
edition to open data publication. In: Proceedings of the 11th International
Conference on Digital Libraries for Musicology. ACM; 2024. doi:10.1145/3660570.3660582'
apa: 'Frömmel, L., Bachmann, T., Plaksin, A. V. K., & Münzmay, A. (2024). Open
Edirom: From hybrid music edition to open data publication. Proceedings of
the 11th International Conference on Digital Libraries for Musicology. https://doi.org/10.1145/3660570.3660582'
bibtex: '@inproceedings{Frömmel_Bachmann_Plaksin_Münzmay_2024, title={Open Edirom:
From hybrid music edition to open data publication}, DOI={10.1145/3660570.3660582},
booktitle={Proceedings of the 11th International Conference on Digital Libraries
for Musicology}, publisher={ACM}, author={Frömmel, Lena and Bachmann, Tobias and
Plaksin, Anna Viktoria Katrin and Münzmay, Andreas}, year={2024} }'
chicago: 'Frömmel, Lena, Tobias Bachmann, Anna Viktoria Katrin Plaksin, and Andreas
Münzmay. “Open Edirom: From Hybrid Music Edition to Open Data Publication.” In
Proceedings of the 11th International Conference on Digital Libraries for Musicology.
ACM, 2024. https://doi.org/10.1145/3660570.3660582.'
ieee: 'L. Frömmel, T. Bachmann, A. V. K. Plaksin, and A. Münzmay, “Open Edirom:
From hybrid music edition to open data publication,” 2024, doi: 10.1145/3660570.3660582.'
mla: 'Frömmel, Lena, et al. “Open Edirom: From Hybrid Music Edition to Open Data
Publication.” Proceedings of the 11th International Conference on Digital Libraries
for Musicology, ACM, 2024, doi:10.1145/3660570.3660582.'
short: 'L. Frömmel, T. Bachmann, A.V.K. Plaksin, A. Münzmay, in: Proceedings of
the 11th International Conference on Digital Libraries for Musicology, ACM, 2024.'
date_created: 2024-06-28T18:17:53Z
date_updated: 2025-09-02T09:11:50Z
department:
- _id: '233'
- _id: '856'
- _id: '615'
doi: 10.1145/3660570.3660582
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://dl.acm.org/doi/pdf/10.1145/3660570.3660582
oa: '1'
project:
- _id: '1048'
name: 'KIO: KreativInstitut.OWL'
- _id: '1064'
name: OPEN Edirom
publication: Proceedings of the 11th International Conference on Digital Libraries
for Musicology
publication_status: published
publisher: ACM
quality_controlled: '1'
status: public
title: 'Open Edirom: From hybrid music edition to open data publication'
type: conference
user_id: '61139'
year: '2024'
...
---
_id: '55912'
abstract:
- lang: eng
text: In explanatory interactions, explainees are expected to continuously provide
feedback to explainers by signaling whether they understand an ongoing explanation.
The study presented in this paper is based on the hypothesis that explainees use
a set of multimodal cues, including vocalizations, facial expressions, and movements
of the torso, head, and hands, to do so. We test this hypothesis by building a
random forest classifier based on a multimodal corpus of dyadic explanations (21
explainers and explainees), in which windows of understanding or non-understanding
were identified by participants in a retrospective video recall task. Results
show that sequences of understanding can indeed be differentiated from those of
non-understanding, and that a diverse set of predictors covering a wide range
of modalities contributes to this classification. Due to data sparsity and a high
degree of individual variation, the generalizability of our results is currently
limited, but they support our hypothesis of the relevance of multimodal display
in explanatory interactions.
author:
- first_name: Olcay
full_name: Türk, Olcay
last_name: Türk
- first_name: Stefan Teodorov
full_name: Lazarov, Stefan Teodorov
id: '90345'
last_name: Lazarov
orcid: 0009-0009-0892-9483
- first_name: Yu
full_name: Wang, Yu
last_name: Wang
- first_name: Hendrik
full_name: Buschmeier, Hendrik
id: '76456'
last_name: Buschmeier
orcid: 0000-0002-9613-5713
- first_name: Angela
full_name: Grimminger, Angela
id: '57578'
last_name: Grimminger
- first_name: Petra
full_name: Wagner, Petra
id: '74505'
last_name: Wagner
citation:
ama: 'Türk O, Lazarov ST, Wang Y, Buschmeier H, Grimminger A, Wagner P. Predictability
of understanding in explanatory interactions based on multimodal cues. In: Proceedings
of the 26th ACM International Conference on Multimodal Interaction. ; 2024:449-458.
doi:10.1145/3678957.3685741'
apa: Türk, O., Lazarov, S. T., Wang, Y., Buschmeier, H., Grimminger, A., & Wagner,
P. (2024). Predictability of understanding in explanatory interactions based on
multimodal cues. Proceedings of the 26th ACM International Conference on Multimodal
Interaction, 449–458. https://doi.org/10.1145/3678957.3685741
bibtex: '@inproceedings{Türk_Lazarov_Wang_Buschmeier_Grimminger_Wagner_2024, place={San
José, Costa Rica}, title={Predictability of understanding in explanatory interactions
based on multimodal cues}, DOI={10.1145/3678957.3685741},
booktitle={Proceedings of the 26th ACM International Conference on Multimodal
Interaction}, author={Türk, Olcay and Lazarov, Stefan Teodorov and Wang, Yu and
Buschmeier, Hendrik and Grimminger, Angela and Wagner, Petra}, year={2024}, pages={449–458}
}'
chicago: Türk, Olcay, Stefan Teodorov Lazarov, Yu Wang, Hendrik Buschmeier, Angela
Grimminger, and Petra Wagner. “Predictability of Understanding in Explanatory
Interactions Based on Multimodal Cues.” In Proceedings of the 26th ACM International
Conference on Multimodal Interaction, 449–58. San José, Costa Rica, 2024.
https://doi.org/10.1145/3678957.3685741.
ieee: 'O. Türk, S. T. Lazarov, Y. Wang, H. Buschmeier, A. Grimminger, and P. Wagner,
“Predictability of understanding in explanatory interactions based on multimodal
cues,” in Proceedings of the 26th ACM International Conference on Multimodal
Interaction, San José, Costa Rica, 2024, pp. 449–458, doi: 10.1145/3678957.3685741.'
mla: Türk, Olcay, et al. “Predictability of Understanding in Explanatory Interactions
Based on Multimodal Cues.” Proceedings of the 26th ACM International Conference
on Multimodal Interaction, 2024, pp. 449–58, doi:10.1145/3678957.3685741.
short: 'O. Türk, S.T. Lazarov, Y. Wang, H. Buschmeier, A. Grimminger, P. Wagner,
in: Proceedings of the 26th ACM International Conference on Multimodal Interaction,
San José, Costa Rica, 2024, pp. 449–458.'
conference:
end_date: 2024-11-08
location: San José, Costa Rica
name: The 26th ACM International Conference on Multimodal Interaction
start_date: 2024-11-04
date_created: 2024-08-30T07:42:55Z
date_updated: 2025-09-02T14:46:03Z
department:
- _id: '660'
doi: 10.1145/3678957.3685741
language:
- iso: eng
page: 449-458
place: San José, Costa Rica
project:
- _id: '112'
name: 'TRR 318 - A02: TRR 318 - Verstehensprozess einer Erklärung beobachten und
auswerten (Teilprojekt A02)'
publication: Proceedings of the 26th ACM International Conference on Multimodal Interaction
publication_status: published
quality_controlled: '1'
status: public
title: Predictability of understanding in explanatory interactions based on multimodal
cues
type: conference
user_id: '57578'
year: '2024'
...
---
_id: '57893'
abstract:
- lang: eng
text: AbstractControl engineering applications
usually require a model that accurately represents the dynamics of the system.
In addition to classical physical modeling, powerful data‐driven approaches are
gaining popularity. However, the resulting models may not be ideal for control
design due to their black‐box structure, which inherently limits interpretability.
Formulating the system dynamics in port‐Hamiltonian form is highly beneficial,
as its valuable property of passivity enables the straightforward design of globally
stable controllers while ensuring physical interpretability. In a recently published
article, we presented a method for data‐driven inference of port‐Hamiltonian models
for complex mechatronic systems, requiring only fundamental physical prior knowledge.
The resulting models accurately represent the nonlinear dynamics of the considered
systems and are physically interpretable. In this contribution, we advance our
previous work by including two key elements. Firstly, we demonstrate the application
of the above described data‐driven PCHD models for controller design. Preserving
the port‐Hamiltonian form in the closed loop not only guarantees global stability
and robustness but also ensures desired speed and damping characteristics. Since
control systems based on output measurements, which are continuously measured
during operation due to the feedback structure, we secondly aim to use this data.
Thus, we augment the existing modeling strategy with an intelligent adaptation
approach to address uncertainties and (un)predictable system changes in mechatronic
systems throughout their lifecycle, such as the installation of new components,
wear, or temperature fluctuations during operation. Our proposed algorithm for
recursively calculated data‐driven port‐Hamiltonian models utilizes a least‐squares
approach with extensions such as automatically adjusting the forgetting factor
and controlling the covariance matrix trace. We demonstrate the results through
model‐based application on an academic example and experimental validation on
a test bench.
author:
- first_name: Annika
full_name: Junker, Annika
id: '41470'
last_name: Junker
orcid: 0009-0002-6475-2503
- first_name: Julia
full_name: Timmermann, Julia
id: '15402'
last_name: Timmermann
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: Junker A, Timmermann J, Trächtler A. Adaptive Data‐Driven Models in Port‐Hamiltonian
Form for Control Design. PAMM. 2024;25(1). doi:10.1002/pamm.202400154
apa: Junker, A., Timmermann, J., & Trächtler, A. (2024). Adaptive Data‐Driven
Models in Port‐Hamiltonian Form for Control Design. PAMM, 25(1).
https://doi.org/10.1002/pamm.202400154
bibtex: '@article{Junker_Timmermann_Trächtler_2024, title={Adaptive Data‐Driven
Models in Port‐Hamiltonian Form for Control Design}, volume={25}, DOI={10.1002/pamm.202400154},
number={1}, journal={PAMM}, publisher={Wiley}, author={Junker, Annika and Timmermann,
Julia and Trächtler, Ansgar}, year={2024} }'
chicago: Junker, Annika, Julia Timmermann, and Ansgar Trächtler. “Adaptive Data‐Driven
Models in Port‐Hamiltonian Form for Control Design.” PAMM 25, no. 1 (2024).
https://doi.org/10.1002/pamm.202400154.
ieee: 'A. Junker, J. Timmermann, and A. Trächtler, “Adaptive Data‐Driven Models
in Port‐Hamiltonian Form for Control Design,” PAMM, vol. 25, no. 1, 2024,
doi: 10.1002/pamm.202400154.'
mla: Junker, Annika, et al. “Adaptive Data‐Driven Models in Port‐Hamiltonian Form
for Control Design.” PAMM, vol. 25, no. 1, Wiley, 2024, doi:10.1002/pamm.202400154.
short: A. Junker, J. Timmermann, A. Trächtler, PAMM 25 (2024).
date_created: 2025-01-01T16:11:38Z
date_updated: 2025-09-03T09:33:23Z
department:
- _id: '153'
- _id: '880'
doi: 10.1002/pamm.202400154
intvolume: ' 25'
issue: '1'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://onlinelibrary.wiley.com/doi/epdf/10.1002/pamm.202400154
oa: '1'
project:
- _id: '690'
name: 'DART: Datengetriebene Methoden in der Regelungstechnik'
publication: PAMM
publication_identifier:
issn:
- 1617-7061
- 1617-7061
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: Adaptive Data‐Driven Models in Port‐Hamiltonian Form for Control Design
type: journal_article
user_id: '15402'
volume: 25
year: '2024'
...
---
_id: '56983'
abstract:
- lang: eng
text: Detecting the veracity of a statement automatically is a challenge the world
is grappling with due to the vast amount of data spread across the web. Verifying
a given claim typically entails validating it within the framework of supporting
evidence like a retrieved piece of text. Classifying the stance of the text with
respect to the claim is called stance classification. Despite advancements in
automated fact-checking, most systems still rely on a substantial quantity of
labeled training data, which can be costly. In this work, we avoid the costly
training or fine-tuning of models by reusing pre-trained large language models
together with few-shot in-context learning. Since we do not train any model, our
approach ExPrompt is lightweight, demands fewer resources than other stance classification
methods and can serve as a modern baseline for future developments. At the same
time, our evaluation shows that our approach is able to outperform former state-of-the-art
stance classification approaches regarding accuracy by at least 2 percent. Our
scripts and data used in this paper are available at https://github.com/dice-group/ExPrompt.
author:
- first_name: Umair
full_name: Qudus, Umair
id: '83392'
last_name: Qudus
orcid: 0000-0001-6714-8729
- first_name: Michael
full_name: Röder, Michael
id: '67199'
last_name: Röder
orcid: https://orcid.org/0000-0002-8609-8277
- first_name: Daniel
full_name: Vollmers, Daniel
last_name: Vollmers
- first_name: Axel-Cyrille
full_name: Ngonga Ngomo, Axel-Cyrille
id: '65716'
last_name: Ngonga Ngomo
citation:
ama: 'Qudus U, Röder M, Vollmers D, Ngonga Ngomo A-C. ExPrompt: Augmenting Prompts
Using Examples as Modern Baseline for Stance Classification. In: Proceedings
of the 33rd ACM International Conference on Information and Knowledge Management.
Vol 9. ACM; 2024:3994-3999. doi:10.1145/3627673.3679923'
apa: 'Qudus, U., Röder, M., Vollmers, D., & Ngonga Ngomo, A.-C. (2024). ExPrompt:
Augmenting Prompts Using Examples as Modern Baseline for Stance Classification.
Proceedings of the 33rd ACM International Conference on Information and Knowledge
Management, 9, 3994–3999. https://doi.org/10.1145/3627673.3679923'
bibtex: '@inproceedings{Qudus_Röder_Vollmers_Ngonga Ngomo_2024, title={ExPrompt:
Augmenting Prompts Using Examples as Modern Baseline for Stance Classification},
volume={9}, DOI={10.1145/3627673.3679923},
booktitle={Proceedings of the 33rd ACM International Conference on Information
and Knowledge Management}, publisher={ACM}, author={Qudus, Umair and Röder, Michael
and Vollmers, Daniel and Ngonga Ngomo, Axel-Cyrille}, year={2024}, pages={3994–3999}
}'
chicago: 'Qudus, Umair, Michael Röder, Daniel Vollmers, and Axel-Cyrille Ngonga
Ngomo. “ExPrompt: Augmenting Prompts Using Examples as Modern Baseline for Stance
Classification.” In Proceedings of the 33rd ACM International Conference on
Information and Knowledge Management, 9:3994–99. ACM, 2024. https://doi.org/10.1145/3627673.3679923.'
ieee: 'U. Qudus, M. Röder, D. Vollmers, and A.-C. Ngonga Ngomo, “ExPrompt: Augmenting
Prompts Using Examples as Modern Baseline for Stance Classification,” in Proceedings
of the 33rd ACM International Conference on Information and Knowledge Management,
Boise, ID, USA, 2024, vol. 9, pp. 3994–3999, doi: 10.1145/3627673.3679923.'
mla: 'Qudus, Umair, et al. “ExPrompt: Augmenting Prompts Using Examples as Modern
Baseline for Stance Classification.” Proceedings of the 33rd ACM International
Conference on Information and Knowledge Management, vol. 9, ACM, 2024, pp.
3994–99, doi:10.1145/3627673.3679923.'
short: 'U. Qudus, M. Röder, D. Vollmers, A.-C. Ngonga Ngomo, in: Proceedings of
the 33rd ACM International Conference on Information and Knowledge Management,
ACM, 2024, pp. 3994–3999.'
conference:
end_date: 2024-10-25
location: Boise, ID, USA
name: 'CIKM ''24: Proceedings of the 33rd ACM International Conference on Information
and Knowledge Management'
start_date: 2024-10-21
date_created: 2024-11-11T13:15:25Z
date_updated: 2025-09-11T09:49:07Z
ddc:
- '006'
doi: 10.1145/3627673.3679923
file:
- access_level: closed
content_type: application/pdf
creator: uqudus
date_created: 2024-11-11T13:24:19Z
date_updated: 2024-11-11T13:24:19Z
file_id: '56984'
file_name: public.pdf
file_size: 531579
relation: main_file
success: 1
file_date_updated: 2024-11-11T13:24:19Z
has_accepted_license: '1'
intvolume: ' 9'
keyword:
- Stance Classification
- Few-shot in-context learning
- Pre-trained large language models
language:
- iso: eng
main_file_link:
- url: https://dl.acm.org/doi/10.1145/3627673.3679923
page: 3994 - 3999
popular_science: '1'
project:
- _id: '412'
name: 'NEBULA: Nutzerzentrierte KI-basierte Erkennung von Fake-News und Fehlinformationen'
publication: Proceedings of the 33rd ACM International Conference on Information and
Knowledge Management
publication_identifier:
isbn:
- 79-8-4007-0436-9/24/10
publication_status: published
publisher: ACM
quality_controlled: '1'
status: public
title: 'ExPrompt: Augmenting Prompts Using Examples as Modern Baseline for Stance
Classification'
type: conference
user_id: '83392'
volume: 9
year: '2024'
...
---
_id: '57240'
abstract:
- lang: eng
text: Validating assertions before adding them to a knowledge graph is an essential
part of its creation and maintenance. Due to the sheer size of knowledge graphs,
automatic fact-checking approaches have been developed. These approaches rely
on reference knowledge to decide whether a given assertion is correct. Recent
hybrid approaches achieve good results by including several knowledge sources.
However, it is often impractical to provide a sheer quantity of textual knowledge
or generate embedding models to leverage these hybrid approaches. We present FaVEL,
an approach that uses algorithm selection and ensemble learning to amalgamate
several existing fact-checking approaches that rely solely on a reference knowledge
graph and, hence, use fewer resources than current hybrid approaches. For our
evaluation, we create updated versions of two existing datasets and a new dataset
dubbed FaVEL-DS. Our evaluation compares our approach to 15 fact-checking approaches—including
the state-of-the-art approach HybridFC—on 3 datasets. Our results demonstrate
that FaVEL outperforms all other approaches significantly by at least 0.04 in
terms of the area under the ROC curve. Our source code, datasets, and evaluation
results are open-source and can be found at https://github.com/dice-group/favel.
author:
- first_name: Umair
full_name: Qudus, Umair
id: '83392'
last_name: Qudus
orcid: 0000-0001-6714-8729
- first_name: Michael
full_name: Röder, Michael
id: '67199'
last_name: Röder
orcid: https://orcid.org/0000-0002-8609-8277
- first_name: Franck Lionel
full_name: Tatkeu Pekarou, Franck Lionel
last_name: Tatkeu Pekarou
- first_name: Ana Alexandra
full_name: Morim da Silva, Ana Alexandra
id: '72108'
last_name: Morim da Silva
- first_name: Axel-Cyrille
full_name: Ngonga Ngomo, Axel-Cyrille
id: '65716'
last_name: Ngonga Ngomo
citation:
ama: 'Qudus U, Röder M, Tatkeu Pekarou FL, Morim da Silva AA, Ngonga Ngomo A-C.
FaVEL: Fact Validation Ensemble Learning. In: Rospocher M, Mehwish Alam, eds.
EKAW 2024. ; 2024.'
apa: 'Qudus, U., Röder, M., Tatkeu Pekarou, F. L., Morim da Silva, A. A., &
Ngonga Ngomo, A.-C. (2024). FaVEL: Fact Validation Ensemble Learning. In M. Rospocher
& Mehwish Alam (Eds.), EKAW 2024.'
bibtex: '@inproceedings{Qudus_Röder_Tatkeu Pekarou_Morim da Silva_Ngonga Ngomo_2024,
title={FaVEL: Fact Validation Ensemble Learning}, booktitle={EKAW 2024}, author={Qudus,
Umair and Röder, Michael and Tatkeu Pekarou, Franck Lionel and Morim da Silva,
Ana Alexandra and Ngonga Ngomo, Axel-Cyrille}, editor={Rospocher, Marco and Mehwish
Alam}, year={2024} }'
chicago: 'Qudus, Umair, Michael Röder, Franck Lionel Tatkeu Pekarou, Ana Alexandra
Morim da Silva, and Axel-Cyrille Ngonga Ngomo. “FaVEL: Fact Validation Ensemble
Learning.” In EKAW 2024, edited by Marco Rospocher and Mehwish Alam, 2024.'
ieee: 'U. Qudus, M. Röder, F. L. Tatkeu Pekarou, A. A. Morim da Silva, and A.-C.
Ngonga Ngomo, “FaVEL: Fact Validation Ensemble Learning,” in EKAW 2024,
Amsterdam, Netherlands, 2024.'
mla: 'Qudus, Umair, et al. “FaVEL: Fact Validation Ensemble Learning.” EKAW 2024,
edited by Marco Rospocher and Mehwish Alam, 2024.'
short: 'U. Qudus, M. Röder, F.L. Tatkeu Pekarou, A.A. Morim da Silva, A.-C. Ngonga
Ngomo, in: M. Rospocher, Mehwish Alam (Eds.), EKAW 2024, 2024.'
conference:
end_date: 2024-11-28
location: Amsterdam, Netherlands
name: 24th International Conference on Knowledge Engineering and Knowledge Management
start_date: 2024-11-26
corporate_editor:
- Mehwish Alam
date_created: 2024-11-19T14:12:49Z
date_updated: 2025-09-11T09:48:12Z
ddc:
- '600'
department:
- _id: '34'
editor:
- first_name: Marco
full_name: Rospocher, Marco
last_name: Rospocher
file:
- access_level: closed
content_type: application/pdf
creator: uqudus
date_created: 2024-11-19T14:14:14Z
date_updated: 2024-11-19T14:14:14Z
file_id: '57241'
file_name: favel.pdf
file_size: 190661
relation: main_file
success: 1
file_date_updated: 2024-11-19T14:14:14Z
has_accepted_license: '1'
keyword:
- fact checking
- ensemble learning
- transfer learning
- knowledge management.
language:
- iso: eng
popular_science: '1'
project:
- _id: '412'
name: 'NEBULA: Nutzerzentrierte KI-basierte Erkennung von Fake-News und Fehlinformationen'
- _id: '285'
name: 'SAIL: SAIL - Nachhaltiger Lebenszyklus von intelligenten soziotechnischen
Systemen'
- _id: '410'
name: 'KnowGraphs: KnowGraphs: Knowledge Graphs at Scale'
publication: EKAW 2024
quality_controlled: '1'
status: public
title: 'FaVEL: Fact Validation Ensemble Learning'
type: conference
user_id: '83392'
year: '2024'
...
---
_id: '61179'
abstract:
- lang: eng
text: 'We examine how users perceive the limitations of an AI system when it encounters
a task that it cannot perform perfectly and whether providing explanations alongside
its answers aids users in constructing an appropriate mental model of the system''s
capabilities and limitations. We employ a visual question answer and explanation
task where we control the AI system''s limitations by manipulating the visual
inputs: during inference, the system either processes full-color or grayscale
images. Our goal is to determine whether participants can perceive the limitations
of the system. We hypothesize that explanations will make limited AI capabilities
more transparent to users. However, our results show that explanations do not
have this effect. Instead of allowing users to more accurately assess the limitations
of the AI system, explanations generally increase users'' perceptions of the system''s
competence – regardless of its actual performance.'
author:
- first_name: Judith
full_name: Sieker, Judith
last_name: Sieker
- first_name: Simeon
full_name: Junker, Simeon
last_name: Junker
- first_name: Ronja
full_name: Utescher, Ronja
last_name: Utescher
- first_name: Nazia
full_name: Attari, Nazia
last_name: Attari
- first_name: Heiko
full_name: Wersing, Heiko
last_name: Wersing
- first_name: Hendrik
full_name: Buschmeier, Hendrik
id: '76456'
last_name: Buschmeier
orcid: 0000-0002-9613-5713
- first_name: Sina
full_name: Zarrieß, Sina
last_name: Zarrieß
citation:
ama: 'Sieker J, Junker S, Utescher R, et al. The illusion of competence: Evaluating
the effect of explanations on users’ mental models of visual question answering
systems. In: Proceedings of the 2024 Conference on Empirical Methods in Natural
Language Processing. ACL; 2024:19459–19475. doi:10.18653/v1/2024.emnlp-main.1084'
apa: 'Sieker, J., Junker, S., Utescher, R., Attari, N., Wersing, H., Buschmeier,
H., & Zarrieß, S. (2024). The illusion of competence: Evaluating the effect
of explanations on users’ mental models of visual question answering systems.
Proceedings of the 2024 Conference on Empirical Methods in Natural Language
Processing, 19459–19475. https://doi.org/10.18653/v1/2024.emnlp-main.1084'
bibtex: '@inproceedings{Sieker_Junker_Utescher_Attari_Wersing_Buschmeier_Zarrieß_2024,
place={Miami, FL, USA}, title={The illusion of competence: Evaluating the effect
of explanations on users’ mental models of visual question answering systems},
DOI={10.18653/v1/2024.emnlp-main.1084},
booktitle={Proceedings of the 2024 Conference on Empirical Methods in Natural
Language Processing}, publisher={ACL}, author={Sieker, Judith and Junker, Simeon
and Utescher, Ronja and Attari, Nazia and Wersing, Heiko and Buschmeier, Hendrik
and Zarrieß, Sina}, year={2024}, pages={19459–19475} }'
chicago: 'Sieker, Judith, Simeon Junker, Ronja Utescher, Nazia Attari, Heiko Wersing,
Hendrik Buschmeier, and Sina Zarrieß. “The Illusion of Competence: Evaluating
the Effect of Explanations on Users’ Mental Models of Visual Question Answering
Systems.” In Proceedings of the 2024 Conference on Empirical Methods in Natural
Language Processing, 19459–19475. Miami, FL, USA: ACL, 2024. https://doi.org/10.18653/v1/2024.emnlp-main.1084.'
ieee: 'J. Sieker et al., “The illusion of competence: Evaluating the effect
of explanations on users’ mental models of visual question answering systems,”
in Proceedings of the 2024 Conference on Empirical Methods in Natural Language
Processing, Miami, FL, USA, 2024, pp. 19459–19475, doi: 10.18653/v1/2024.emnlp-main.1084.'
mla: 'Sieker, Judith, et al. “The Illusion of Competence: Evaluating the Effect
of Explanations on Users’ Mental Models of Visual Question Answering Systems.”
Proceedings of the 2024 Conference on Empirical Methods in Natural Language
Processing, ACL, 2024, pp. 19459–19475, doi:10.18653/v1/2024.emnlp-main.1084.'
short: 'J. Sieker, S. Junker, R. Utescher, N. Attari, H. Wersing, H. Buschmeier,
S. Zarrieß, in: Proceedings of the 2024 Conference on Empirical Methods in Natural
Language Processing, ACL, Miami, FL, USA, 2024, pp. 19459–19475.'
conference:
end_date: 2024-11-16
location: Miami, FL, USA
name: 2024 Conference on Empirical Methods in Natural Language Processing (EMNLP)
start_date: 2024-11-12
date_created: 2025-09-11T07:22:05Z
date_updated: 2025-09-11T10:14:50Z
department:
- _id: '660'
doi: 10.18653/v1/2024.emnlp-main.1084
extern: '1'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://doi.org/10.18653/v1/2024.emnlp-main.1084
oa: '1'
page: 19459–19475
place: Miami, FL, USA
project:
- _id: '112'
name: 'TRR 318; TP A02: Verstehensprozess einer Erklärung beobachten und auswerten'
publication: Proceedings of the 2024 Conference on Empirical Methods in Natural Language
Processing
publication_status: published
publisher: ACL
quality_controlled: '1'
status: public
title: 'The illusion of competence: Evaluating the effect of explanations on users’
mental models of visual question answering systems'
type: conference
user_id: '76456'
year: '2024'
...
---
_id: '65052'
author:
- first_name: Mirko
full_name: Albrecht, Mirko
last_name: Albrecht
- first_name: Max Oliver
full_name: Bialaschik, Max Oliver
id: '32297'
last_name: Bialaschik
- first_name: Michael
full_name: Gehde, Michael
last_name: Gehde
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
citation:
ama: 'Albrecht M, Bialaschik MO, Gehde M, Schöppner V. Serial hot gas welding -
Heating and welding behaviour of a slot nozzle. In: AIP Conference Proceedings.
Vol 3181. AIP Publishing; 2024. doi:10.1063/5.0192316'
apa: Albrecht, M., Bialaschik, M. O., Gehde, M., & Schöppner, V. (2024). Serial
hot gas welding - Heating and welding behaviour of a slot nozzle. AIP Conference
Proceedings, 3181. https://doi.org/10.1063/5.0192316
bibtex: '@inproceedings{Albrecht_Bialaschik_Gehde_Schöppner_2024, title={Serial
hot gas welding - Heating and welding behaviour of a slot nozzle}, volume={3181},
DOI={10.1063/5.0192316}, booktitle={AIP
Conference Proceedings}, publisher={AIP Publishing}, author={Albrecht, Mirko and
Bialaschik, Max Oliver and Gehde, Michael and Schöppner, Volker}, year={2024}
}'
chicago: Albrecht, Mirko, Max Oliver Bialaschik, Michael Gehde, and Volker Schöppner.
“Serial Hot Gas Welding - Heating and Welding Behaviour of a Slot Nozzle.” In
AIP Conference Proceedings, Vol. 3181. AIP Publishing, 2024. https://doi.org/10.1063/5.0192316.
ieee: 'M. Albrecht, M. O. Bialaschik, M. Gehde, and V. Schöppner, “Serial hot gas
welding - Heating and welding behaviour of a slot nozzle,” in AIP Conference
Proceedings, 2024, vol. 3181, doi: 10.1063/5.0192316.'
mla: Albrecht, Mirko, et al. “Serial Hot Gas Welding - Heating and Welding Behaviour
of a Slot Nozzle.” AIP Conference Proceedings, vol. 3181, AIP Publishing,
2024, doi:10.1063/5.0192316.
short: 'M. Albrecht, M.O. Bialaschik, M. Gehde, V. Schöppner, in: AIP Conference
Proceedings, AIP Publishing, 2024.'
date_created: 2026-03-18T12:24:07Z
date_updated: 2026-03-18T12:24:42Z
department:
- _id: '9'
- _id: '321'
- _id: '367'
doi: 10.1063/5.0192316
intvolume: ' 3181'
language:
- iso: eng
publication: AIP Conference Proceedings
publication_identifier:
issn:
- 0094-243X
publication_status: published
publisher: AIP Publishing
quality_controlled: '1'
status: public
title: Serial hot gas welding - Heating and welding behaviour of a slot nozzle
type: conference
user_id: '59363'
volume: 3181
year: '2024'
...
---
_id: '57699'
abstract:
- lang: eng
text: The optimization of process parameters in powder Directed Energy Deposition
(DED) is essential for achieving consistent, high-quality bead geometries, which
directly influence the performance and structural integrity of fabricated components.
As a subset of additive manufacturing (AM), the DED process, also referred to
as laser metal deposition (LMD), enables precise, layer-by-layer material deposition,
making it highly suitable for complex geometries and part repair applications.
Critical parameters, such as the laser power, feed rate, powder mass flow, and
substrate temperature govern the deposition process, impacting the bead height,
width, contact angle, and dilution. Inconsistent control over these variables
can lead to defects, such as poor bonding, dimensional inaccuracies, and material
weaknesses, ultimately compromising the final product. This paper investigates
the effects of various process parameters, specifically the substrate temperature,
on bead track geometry in DED processes for stainless steel (1.4404). A specialized
experimental setup, integrated within a DED machine, facilitates the controlled
thermal conditioning of sample sheets. Using Design of Experiments (DoE) methods,
individual bead marks are generated and analyzed to assess geometric characteristics.
Regression models, including both linear and quadratic approaches, are constructed
to predict machine parameters for achieving the desired bead geometry at different
substrate temperatures. Validation experiments confirm the accuracy and reliability
of the models, particularly in predicting the bead height, bead width, and contact
angle across a broad range of substrate temperatures. However, the models demonstrated
limitations in accurately predicting dilution, indicating the need for further
refinement. Despite some deviations in measured values, successful fabrication
is achieved, demonstrating robust bonding between the bead and substrate. The
developed models offer insights into optimizing DED process parameters to achieve
desired bead characteristics, advancing the precision and reliability of additive
manufacturing technology. Future work will focus on refining the regression models
to improve predictions, particularly for dilution, and further investigate non-linear
interactions between process variables.
article_number: '1353'
article_type: original
author:
- first_name: Deviprasad
full_name: Chalicheemalapalli Jayasankar, Deviprasad
id: '49504'
last_name: Chalicheemalapalli Jayasankar
orcid: https://orcid.org/ 0000-0002-3446-2444
- first_name: Stefan
full_name: Gnaase, Stefan
id: '25730'
last_name: Gnaase
- first_name: Dennis
full_name: Lehnert, Dennis
id: '90491'
last_name: Lehnert
- first_name: Artur
full_name: Walter, Artur
last_name: Walter
- first_name: Robin
full_name: Rohling, Robin
last_name: Rohling
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Chalicheemalapalli Jayasankar D, Gnaase S, Lehnert D, Walter A, Rohling R,
Tröster T. Effect of Substrate Temperature on Bead Track Geometry of 316L in Directed
Energy Deposition: Investigation and Regression Modeling. Metals. 2024;14(12).
doi:10.3390/met14121353'
apa: 'Chalicheemalapalli Jayasankar, D., Gnaase, S., Lehnert, D., Walter, A., Rohling,
R., & Tröster, T. (2024). Effect of Substrate Temperature on Bead Track Geometry
of 316L in Directed Energy Deposition: Investigation and Regression Modeling.
Metals, 14(12), Article 1353. https://doi.org/10.3390/met14121353'
bibtex: '@article{Chalicheemalapalli Jayasankar_Gnaase_Lehnert_Walter_Rohling_Tröster_2024,
title={Effect of Substrate Temperature on Bead Track Geometry of 316L in Directed
Energy Deposition: Investigation and Regression Modeling}, volume={14}, DOI={10.3390/met14121353}, number={121353},
journal={Metals}, publisher={MDPI AG}, author={Chalicheemalapalli Jayasankar,
Deviprasad and Gnaase, Stefan and Lehnert, Dennis and Walter, Artur and Rohling,
Robin and Tröster, Thomas}, year={2024} }'
chicago: 'Chalicheemalapalli Jayasankar, Deviprasad, Stefan Gnaase, Dennis Lehnert,
Artur Walter, Robin Rohling, and Thomas Tröster. “Effect of Substrate Temperature
on Bead Track Geometry of 316L in Directed Energy Deposition: Investigation and
Regression Modeling.” Metals 14, no. 12 (2024). https://doi.org/10.3390/met14121353.'
ieee: 'D. Chalicheemalapalli Jayasankar, S. Gnaase, D. Lehnert, A. Walter, R. Rohling,
and T. Tröster, “Effect of Substrate Temperature on Bead Track Geometry of 316L
in Directed Energy Deposition: Investigation and Regression Modeling,” Metals,
vol. 14, no. 12, Art. no. 1353, 2024, doi: 10.3390/met14121353.'
mla: 'Chalicheemalapalli Jayasankar, Deviprasad, et al. “Effect of Substrate Temperature
on Bead Track Geometry of 316L in Directed Energy Deposition: Investigation and
Regression Modeling.” Metals, vol. 14, no. 12, 1353, MDPI AG, 2024, doi:10.3390/met14121353.'
short: D. Chalicheemalapalli Jayasankar, S. Gnaase, D. Lehnert, A. Walter, R. Rohling,
T. Tröster, Metals 14 (2024).
date_created: 2024-12-10T12:13:23Z
date_updated: 2026-03-20T08:44:28Z
ddc:
- '670'
department:
- _id: '321'
- _id: '149'
- _id: '9'
doi: 10.3390/met14121353
has_accepted_license: '1'
intvolume: ' 14'
issue: '12'
keyword:
- additive manufacturing
- direct energy deposition
- laser metal deposition
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.mdpi.com/2075-4701/14/12/1353
oa: '1'
publication: Metals
publication_identifier:
issn:
- 2075-4701
publication_status: published
publisher: MDPI AG
quality_controlled: '1'
status: public
title: 'Effect of Substrate Temperature on Bead Track Geometry of 316L in Directed
Energy Deposition: Investigation and Regression Modeling'
type: journal_article
user_id: '49504'
volume: 14
year: '2024'
...
---
_id: '56089'
abstract:
- lang: eng
text: Additive manufacturing (AM) technologies enable near-net-shape designs
and demand-oriented material usage, which significantly minimizes waste. This
points to a substantial opportunity for further optimization in material savings
and process design. The current study delves into the advancement of sustainable
manufacturing practices in the automotive industry, emphasizing the crucial role
of lightweight construction concepts and AM technologies in enhancing resource
efficiency and reducing greenhouse gas emissions. By exploring the integration
of novel AM techniques such as selective laser melting (SLM) and laser metal deposition
(LMD), the study aims to overcome existing limitations like slow build-up rates
and limited component resolution. The study’s core objective revolves around the
development and validation of a continuous process chain that synergizes different
AM routes. In the current study, the continuous process chain for DMG MORI Lasertec
65 3D’s LMD system and the DMG MORI Lasertec 30 3D’s was demonstrated using 316L
and 1.2709 steel materials. This integrated approach is designed to significantly
curtail process times and minimize component costs, thus suggesting an industry-oriented
process chain for future manufacturing paradigms. Additionally, the research investigates
the production and material behavior of components under varying manufacturing
processes, material combinations, and boundary layer materials. The culmination
of this study is the validation of the proposed process route through a technology
demonstrator, assessing its scalability and setting a benchmark for resource-efficient
manufacturing in the automotive sector.
article_number: '772'
article_type: original
author:
- first_name: Deviprasad
full_name: Chalicheemalapalli Jayasankar, Deviprasad
id: '49504'
last_name: Chalicheemalapalli Jayasankar
orcid: https://orcid.org/ 0000-0002-3446-2444
- first_name: Stefan
full_name: Gnaase, Stefan
id: '25730'
last_name: Gnaase
- first_name: Maximilian Alexander
full_name: Kaiser, Maximilian Alexander
id: '72351'
last_name: Kaiser
orcid: 0009-0008-1333-3396
- first_name: Dennis
full_name: Lehnert, Dennis
id: '90491'
last_name: Lehnert
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Chalicheemalapalli Jayasankar D, Gnaase S, Kaiser MA, Lehnert D, Tröster T.
Advancements in Hybrid Additive Manufacturing: Integrating SLM and LMD for High-Performance
Applications. Metals. 2024;14(7). doi:10.3390/met14070772'
apa: 'Chalicheemalapalli Jayasankar, D., Gnaase, S., Kaiser, M. A., Lehnert, D.,
& Tröster, T. (2024). Advancements in Hybrid Additive Manufacturing: Integrating
SLM and LMD for High-Performance Applications. Metals, 14(7), Article
772. https://doi.org/10.3390/met14070772'
bibtex: '@article{Chalicheemalapalli Jayasankar_Gnaase_Kaiser_Lehnert_Tröster_2024,
title={Advancements in Hybrid Additive Manufacturing: Integrating SLM and LMD
for High-Performance Applications}, volume={14}, DOI={10.3390/met14070772},
number={7772}, journal={Metals}, publisher={MDPI AG}, author={Chalicheemalapalli
Jayasankar, Deviprasad and Gnaase, Stefan and Kaiser, Maximilian Alexander and
Lehnert, Dennis and Tröster, Thomas}, year={2024} }'
chicago: 'Chalicheemalapalli Jayasankar, Deviprasad, Stefan Gnaase, Maximilian Alexander
Kaiser, Dennis Lehnert, and Thomas Tröster. “Advancements in Hybrid Additive Manufacturing:
Integrating SLM and LMD for High-Performance Applications.” Metals 14,
no. 7 (2024). https://doi.org/10.3390/met14070772.'
ieee: 'D. Chalicheemalapalli Jayasankar, S. Gnaase, M. A. Kaiser, D. Lehnert, and
T. Tröster, “Advancements in Hybrid Additive Manufacturing: Integrating SLM and
LMD for High-Performance Applications,” Metals, vol. 14, no. 7, Art. no.
772, 2024, doi: 10.3390/met14070772.'
mla: 'Chalicheemalapalli Jayasankar, Deviprasad, et al. “Advancements in Hybrid
Additive Manufacturing: Integrating SLM and LMD for High-Performance Applications.”
Metals, vol. 14, no. 7, 772, MDPI AG, 2024, doi:10.3390/met14070772.'
short: D. Chalicheemalapalli Jayasankar, S. Gnaase, M.A. Kaiser, D. Lehnert, T.
Tröster, Metals 14 (2024).
date_created: 2024-09-10T10:19:32Z
date_updated: 2026-03-20T08:44:23Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.3390/met14070772
intvolume: ' 14'
issue: '7'
keyword:
- additive manufacturing (AM)
- selective laser melting (SLM)
- laser metal deposition (LMD)
- hybrid manufacturing
- process optimization
- 316L
- '1.2709'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.mdpi.com/2075-4701/14/7/772
oa: '1'
publication: Metals
publication_identifier:
issn:
- 2075-4701
publication_status: published
publisher: MDPI AG
quality_controlled: '1'
status: public
title: 'Advancements in Hybrid Additive Manufacturing: Integrating SLM and LMD for
High-Performance Applications'
type: journal_article
user_id: '49504'
volume: 14
year: '2024'
...
---
_id: '55743'
abstract:
- lang: eng
text: The use of hybrid materials as a combination of fibre-reinforced plastic (FRP)
and metal is of great interest in order to meet the increasing demands for sustainability,
efficiency, and emission reduction based on the principle of lightweight design.
These two components can therefore be joined using the intrinsic joining technique,
which is formed by curing the matrix of the FRP component. In this study, for
the hybrid joint, unidirectionally pre-impregnated semi-finished products (prepregs)
with duromer matrix resin and micro-alloyed HC340LA steel were used. In order
to conduct a detailed investigation, the damage mechanisms of intrinsically produced
fibre metal laminates (FMLs), a new clamping device, and a novel pressing tool
were designed and put into operation. The prepregs were prestressed by applying
a preloading force using a specially designed prestressing frame. Hybrid specimens
were then produced and subjected to nanoindentation and a shear tensile test.
In particular, the effect of the residual stress state by varying the defined
prestressing force on the damage mechanisms was studied. The results showed that
no fracture patterns occurred in the interface of the specimens without preloading
as a result of curing at 120 °C, whereas specimens with preloading failed at the
boundary layer in the tensile range. Nevertheless, all specimens cured at 160
°C failed at the boundary layer in the tensile range. Furthermore, it was proven
that the force and displacement of the preloaded specimens were promisingly higher
than those of the unpreloaded specimens.
article_number: '316'
article_type: original
author:
- first_name: Hayrettin
full_name: Irmak, Hayrettin
id: '75657'
last_name: Irmak
orcid: https://orcid.org/0009-0009-6267-2957
- first_name: Steffen Rainer
full_name: Tinkloh, Steffen Rainer
id: '72722'
last_name: Tinkloh
- first_name: Thorsten
full_name: Marten, Thorsten
id: '338'
last_name: Marten
orcid: 0009-0001-6433-7839
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: Irmak H, Tinkloh SR, Marten T, Tröster T. Development of a Tool Concept for
Prestressed Fibre Metal Laminates and Their Effect on Interface Failure. Journal
of Composites Science. 2024;8(8). doi:10.3390/jcs8080316
apa: Irmak, H., Tinkloh, S. R., Marten, T., & Tröster, T. (2024). Development
of a Tool Concept for Prestressed Fibre Metal Laminates and Their Effect on Interface
Failure. Journal of Composites Science, 8(8), Article 316. https://doi.org/10.3390/jcs8080316
bibtex: '@article{Irmak_Tinkloh_Marten_Tröster_2024, title={Development of a Tool
Concept for Prestressed Fibre Metal Laminates and Their Effect on Interface Failure},
volume={8}, DOI={10.3390/jcs8080316},
number={8316}, journal={Journal of Composites Science}, publisher={MDPI AG}, author={Irmak,
Hayrettin and Tinkloh, Steffen Rainer and Marten, Thorsten and Tröster, Thomas},
year={2024} }'
chicago: Irmak, Hayrettin, Steffen Rainer Tinkloh, Thorsten Marten, and Thomas Tröster.
“Development of a Tool Concept for Prestressed Fibre Metal Laminates and Their
Effect on Interface Failure.” Journal of Composites Science 8, no. 8 (2024).
https://doi.org/10.3390/jcs8080316.
ieee: 'H. Irmak, S. R. Tinkloh, T. Marten, and T. Tröster, “Development of a Tool
Concept for Prestressed Fibre Metal Laminates and Their Effect on Interface Failure,”
Journal of Composites Science, vol. 8, no. 8, Art. no. 316, 2024, doi:
10.3390/jcs8080316.'
mla: Irmak, Hayrettin, et al. “Development of a Tool Concept for Prestressed Fibre
Metal Laminates and Their Effect on Interface Failure.” Journal of Composites
Science, vol. 8, no. 8, 316, MDPI AG, 2024, doi:10.3390/jcs8080316.
short: H. Irmak, S.R. Tinkloh, T. Marten, T. Tröster, Journal of Composites Science
8 (2024).
date_created: 2024-08-23T06:47:27Z
date_updated: 2026-03-23T10:31:09Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.3390/jcs8080316
intvolume: ' 8'
issue: '8'
keyword:
- CFRP
- prestressing
- fibre metal laminate
- interface
- prepreg
- shear tensile test
language:
- iso: eng
publication: Journal of Composites Science
publication_identifier:
issn:
- 2504-477X
publication_status: published
publisher: MDPI AG
quality_controlled: '1'
status: public
title: Development of a Tool Concept for Prestressed Fibre Metal Laminates and Their
Effect on Interface Failure
type: journal_article
user_id: '338'
volume: 8
year: '2024'
...
---
_id: '65161'
abstract:
- lang: eng
text: "Despite increasing ethnic diversity in Germany, racist structures are still
deeply rooted in society,\r\nas is demonstrated by various initiatives and studies.
Racism is also evident in the depiction of\r\nJesus Christ, who traditionally
is portrayed as 'white' in Christian art, although he must be read\r\nbiblically
as a Person of Color (PoC). Examples such as the “Wales Window for Alabama” (1964)\r\nby
Ronald John Petts and the contemporary icon by Kelly Latimore “Christ in The Rubble”
(2023)\r\nshow Jesus as PoC and address racism and social justice. Children’s
Bibles continue to be\r\ndominated by ‘white’ depictions of Jesus and the people
around him. Works such as the chil-\r\ndren’s Bibles by Desmond Tutu (lyrics)
/ Laure Fournier et al. (illustration) (2010), Sören Dalevi\r\n(lyrics) / Marcus-Gunnar
Petterson (illustration) (2022), Willemijn de Weerd (lyrics) / Marieke ten\r\nBerge
(illustration) (2022) and Andrea Karimé (lyrics) / Anna Lisicki-Hehn (illustration)
(2023) of-\r\nfer more diverse and racism-sensitive depictions that contribute
to the promotion of diversity\r\ncompetence and positive identity formation. The
article argues for a more extensive representa-\r\ntion of diversity in depictions
of Jesus Christ in Christian art and children’s Bibles in order to\r\navoid discriminatory
stereotypes and to encourage PoC, children and adults.\r\n"
author:
- first_name: Marion
full_name: Keuchen, Marion
id: '251'
last_name: Keuchen
orcid: https://orcid.org/0009-0000-9904-6479
- first_name: Stephanie
full_name: Lerke, Stephanie
last_name: Lerke
citation:
ama: 'Keuchen M, Lerke S. Vielfalt begrüßen. Ein rassismuskritischer Blick auf Jesus-Darstellungen
in christlicher Kunst und Kinderbibeln. In: Deutsche Bibelgesellschaft, ed. Die
Bibel in der Kunst/ Bible in the Arts. Vol 8. Bibel in der Kunst/ Bibel in
the Arts (BiKu). ; 2024:1-21.'
apa: Keuchen, M., & Lerke, S. (2024). Vielfalt begrüßen. Ein rassismuskritischer
Blick auf Jesus-Darstellungen in christlicher Kunst und Kinderbibeln. In Deutsche
Bibelgesellschaft (Ed.), Die Bibel in der Kunst/ Bible in the Arts (Vol.
8, pp. 1–21).
bibtex: '@inbook{Keuchen_Lerke_2024, series={Bibel in der Kunst/ Bibel in the Arts
(BiKu)}, title={Vielfalt begrüßen. Ein rassismuskritischer Blick auf Jesus-Darstellungen
in christlicher Kunst und Kinderbibeln}, volume={8}, booktitle={Die Bibel in der
Kunst/ Bible in the Arts}, author={Keuchen, Marion and Lerke, Stephanie}, editor={Deutsche
Bibelgesellschaft}, year={2024}, pages={1–21}, collection={Bibel in der Kunst/
Bibel in the Arts (BiKu)} }'
chicago: Keuchen, Marion, and Stephanie Lerke. “Vielfalt begrüßen. Ein rassismuskritischer
Blick auf Jesus-Darstellungen in christlicher Kunst und Kinderbibeln.” In Die
Bibel in der Kunst/ Bible in the Arts, edited by Deutsche Bibelgesellschaft,
8:1–21. Bibel in der Kunst/ Bibel in the Arts (BiKu), 2024.
ieee: M. Keuchen and S. Lerke, “Vielfalt begrüßen. Ein rassismuskritischer Blick
auf Jesus-Darstellungen in christlicher Kunst und Kinderbibeln,” in Die Bibel
in der Kunst/ Bible in the Arts, vol. 8, Deutsche Bibelgesellschaft, Ed. 2024,
pp. 1–21.
mla: Keuchen, Marion, and Stephanie Lerke. “Vielfalt begrüßen. Ein rassismuskritischer
Blick auf Jesus-Darstellungen in christlicher Kunst und Kinderbibeln.” Die
Bibel in der Kunst/ Bible in the Arts, edited by Deutsche Bibelgesellschaft,
vol. 8, 2024, pp. 1–21.
short: 'M. Keuchen, S. Lerke, in: Deutsche Bibelgesellschaft (Ed.), Die Bibel in
der Kunst/ Bible in the Arts, 2024, pp. 1–21.'
corporate_editor:
- Deutsche Bibelgesellschaft
date_created: 2026-03-27T07:55:48Z
date_updated: 2026-03-27T08:08:13Z
ddc:
- '200'
department:
- _id: '36'
- _id: '20'
- _id: '500'
file:
- access_level: closed
content_type: application/pdf
creator: keuchen
date_created: 2026-03-27T07:47:21Z
date_updated: 2026-03-27T07:47:21Z
file_id: '65162'
file_name: BiKu_2024_05_Keuchen_Lerke_Jesus-Darstellungen.pdf
file_size: 1334409
relation: main_file
success: 1
file_date_updated: 2026-03-27T07:47:21Z
has_accepted_license: '1'
intvolume: ' 8'
language:
- iso: ger
main_file_link:
- open_access: '1'
url: https://www.die-bibel.de/bibel-in-der-kunst/bibel-in-der-kunst-2024
oa: '1'
page: 1-21
publication: Die Bibel in der Kunst/ Bible in the Arts
publication_status: published
quality_controlled: '1'
related_material:
link:
- relation: confirmation
url: https://www.die-bibel.de/bibel-in-der-kunst/bibel-in-der-kunst-2024
series_title: Bibel in der Kunst/ Bibel in the Arts (BiKu)
status: public
title: Vielfalt begrüßen. Ein rassismuskritischer Blick auf Jesus-Darstellungen in
christlicher Kunst und Kinderbibeln
type: book_chapter
user_id: '251'
volume: 8
year: '2024'
...
---
_id: '65163'
abstract:
- lang: ger
text: "Dieser Beitrag untersucht aktuelle pädagogische und hermeneutische Ansätze
der\r\njüdischen, christlichen und muslimischen Religionspädagogik in Kindertora,
Kinderbibel\r\nund Kinderkoran. Er betont die Notwendigkeit für Lehrkräfte, sich
mit den spezifischen\r\npädagogischen und hermeneutischen Ansätzen der drei monotheistischen
Religionen\r\nvertraut zu machen, um die didaktischen Heiligen Schriften im Unterricht
angemessen\r\nnutzen zu können. Beispiele aus dem aktuellen Religionsunterricht
zeigen\r\nMissverständnisse und Überraschungen auf, die durch unzureichendes Wissen
entstehen.\r\nDer Artikel hebt die Bedeutung einer jüdischen Identitätsbildung,
einer christlichen\r\ndiversitätssensiblen Perspektive und von muslimischen normativen
Diskursen in den\r\nverschiedenen Religionspädagogiken hervor und diskutiert die
Herausforderungen und\r\nChancen, die mit der Nutzung didaktisierter Heiliger
Schriften verbunden sind.\r\n"
- lang: eng
text: "This article examines current pedagogical and hermeneutical approaches to
Jewish,\r\nChristian and Muslim religious education in the Children’s Torah, Children’s
Bible and\r\nChildren’s Quran. It emphasizes the need for teachers to familiarize
themselves with the\r\nspecific pedagogical and hermeneutical approaches of the
three monotheistic religions in\r\norder to be able to use the didactic Holy Scriptures
appropriately in the classroom.\r\nExamples from current religious education lessons
show misunderstandings and\r\nsurprises that arise due to insufficient knowledge.
The article emphasizes the importance\r\nof Jewish identity formation, a Christian
diversity-sensitive perspective and Muslim\r\nnormative discourses in the various
religious pedagogies and discusses the challenges\r\nand opportunities associated
with the use of didactic Holy Scriptures.\r\n"
article_type: original
author:
- first_name: Marion
full_name: Keuchen, Marion
id: '251'
last_name: Keuchen
orcid: https://orcid.org/0009-0000-9904-6479
citation:
ama: 'Keuchen M. Aktuelle pädagogische und hermeneutische Ansätze aus Judentum,
Christentum und Islam in Kindertora, Kinderbibel und Kinderkoran: Identitätsbildung,
diversitätssensible Religionspädagogik und normative Diskurse. TheoWeb Zeitschrift
für Religionspädagogik. 2024;2:224-237. doi:10.23770/tw0360'
apa: 'Keuchen, M. (2024). Aktuelle pädagogische und hermeneutische Ansätze aus Judentum,
Christentum und Islam in Kindertora, Kinderbibel und Kinderkoran: Identitätsbildung,
diversitätssensible Religionspädagogik und normative Diskurse. TheoWeb. Zeitschrift
für Religionspädagogik, 2, 224–237. https://doi.org/10.23770/tw0360'
bibtex: '@article{Keuchen_2024, title={Aktuelle pädagogische und hermeneutische
Ansätze aus Judentum, Christentum und Islam in Kindertora, Kinderbibel und Kinderkoran:
Identitätsbildung, diversitätssensible Religionspädagogik und normative Diskurse},
volume={2}, DOI={10.23770/tw0360},
journal={TheoWeb. Zeitschrift für Religionspädagogik}, author={Keuchen, Marion},
year={2024}, pages={224–237} }'
chicago: 'Keuchen, Marion. “Aktuelle pädagogische und hermeneutische Ansätze aus
Judentum, Christentum und Islam in Kindertora, Kinderbibel und Kinderkoran: Identitätsbildung,
diversitätssensible Religionspädagogik und normative Diskurse.” TheoWeb. Zeitschrift
für Religionspädagogik 2 (2024): 224–37. https://doi.org/10.23770/tw0360.'
ieee: 'M. Keuchen, “Aktuelle pädagogische und hermeneutische Ansätze aus Judentum,
Christentum und Islam in Kindertora, Kinderbibel und Kinderkoran: Identitätsbildung,
diversitätssensible Religionspädagogik und normative Diskurse,” TheoWeb. Zeitschrift
für Religionspädagogik, vol. 2, pp. 224–237, 2024, doi: 10.23770/tw0360.'
mla: 'Keuchen, Marion. “Aktuelle pädagogische und hermeneutische Ansätze aus Judentum,
Christentum und Islam in Kindertora, Kinderbibel und Kinderkoran: Identitätsbildung,
diversitätssensible Religionspädagogik und normative Diskurse.” TheoWeb. Zeitschrift
für Religionspädagogik, vol. 2, 2024, pp. 224–37, doi:10.23770/tw0360.'
short: M. Keuchen, TheoWeb. Zeitschrift für Religionspädagogik 2 (2024) 224–237.
date_created: 2026-03-27T08:06:54Z
date_updated: 2026-03-27T18:41:17Z
ddc:
- '200'
department:
- _id: '20'
- _id: '500'
doi: 10.23770/tw0360
file:
- access_level: closed
content_type: application/pdf
creator: keuchen
date_created: 2026-03-27T08:04:06Z
date_updated: 2026-03-27T08:04:06Z
file_id: '65164'
file_name: aktuelle-paedagogische-und-hermeneutische-ansaetze-aus-judentum-christentum-und-islam-in-kindertora-kinderbibel-und-kinderkoran-identitaetsbildung-diversitaetssensible-religionspaedagogik-und-normative-diskurse.pdf
file_size: 223437
relation: main_file
success: 1
file_date_updated: 2026-03-27T08:04:06Z
has_accepted_license: '1'
intvolume: ' 2'
keyword:
- Heilige Schriften
- interreligiöses Lernen
- Schrifthermeneutik
- Identität
- diversitätssensible Religionspädagogik
- jüdische Religionspädagogik
- muslimische Religionspädagogik
- christliche Religionspädagogik
- Holy scriptures
- interreligious learning
- hermeneutics of scripture
- identity
- diversity-sensitive religious education
- Jewish religious education
- Muslim religious education
- Christian religious education
language:
- iso: ger
main_file_link:
- open_access: '1'
url: https://www.theo-web.de/fileadmin/user_upload/theo-web/pdfs/23-jahrgang-2024-heft-2/aktuelle-paedagogische-und-hermeneutische-ansaetze-aus-judentum-christentum-und-islam-in-kindertora-kinderbibel-und-kinderkoran-identitaetsbildung-diversitaetssensible-religionspaedagogik-und-normative-diskurse.pdf
oa: '1'
page: 224-237
publication: TheoWeb. Zeitschrift für Religionspädagogik
publication_status: published
quality_controlled: '1'
related_material:
link:
- relation: confirmation
url: https://www.theo-web.de/fileadmin/user_upload/theo-web/pdfs/23-jahrgang-2024-heft-2/aktuelle-paedagogische-und-hermeneutische-ansaetze-aus-judentum-christentum-und-islam-in-kindertora-kinderbibel-und-kinderkoran-identitaetsbildung-diversitaetssensible-religionspaedagogik-und-normative-diskurse.pdf
status: public
title: 'Aktuelle pädagogische und hermeneutische Ansätze aus Judentum, Christentum
und Islam in Kindertora, Kinderbibel und Kinderkoran: Identitätsbildung, diversitätssensible
Religionspädagogik und normative Diskurse'
type: journal_article
user_id: '251'
volume: 2
year: '2024'
...
---
_id: '57309'
author:
- first_name: Ioannis
full_name: Safranoglou, Ioannis
last_name: Safranoglou
- first_name: Alexis
full_name: Stavroulakis, Alexis
last_name: Stavroulakis
- first_name: Jens
full_name: Pottebaum, Jens
id: '405'
last_name: Pottebaum
orcid: http://orcid.org/0000-0001-8778-2989
- first_name: Marcel
full_name: Ebel, Marcel
id: '81788'
last_name: Ebel
orcid: https://orcid.org/0009-0007-5400-4436
- first_name: Georgios
full_name: Lamprinakis, Georgios
last_name: Lamprinakis
- first_name: Despina
full_name: Dimelli, Despina
last_name: Dimelli
- first_name: Katerina
full_name: Mania, Katerina
last_name: Mania
citation:
ama: 'Safranoglou I, Stavroulakis A, Pottebaum J, et al. Augmented Reality for Real-Time
Decision-Making in Flood Emergencies. In: 2024 IEEE International Symposium
on Mixed and Augmented Reality Adjunct (ISMAR-Adjunct). IEEE; 2024. doi:https://doi.org/10.1109/ISMAR-Adjunct64951.2024.00032'
apa: Safranoglou, I., Stavroulakis, A., Pottebaum, J., Ebel, M., Lamprinakis, G.,
Dimelli, D., & Mania, K. (2024). Augmented Reality for Real-Time Decision-Making
in Flood Emergencies. 2024 IEEE International Symposium on Mixed and Augmented
Reality Adjunct (ISMAR-Adjunct). 2024 IEEE International Symposium on Mixed
and Augmented Reality. https://doi.org/10.1109/ISMAR-Adjunct64951.2024.00032
bibtex: '@inproceedings{Safranoglou_Stavroulakis_Pottebaum_Ebel_Lamprinakis_Dimelli_Mania_2024,
title={Augmented Reality for Real-Time Decision-Making in Flood Emergencies},
DOI={https://doi.org/10.1109/ISMAR-Adjunct64951.2024.00032},
booktitle={2024 IEEE International Symposium on Mixed and Augmented Reality Adjunct
(ISMAR-Adjunct)}, publisher={IEEE}, author={Safranoglou, Ioannis and Stavroulakis,
Alexis and Pottebaum, Jens and Ebel, Marcel and Lamprinakis, Georgios and Dimelli,
Despina and Mania, Katerina}, year={2024} }'
chicago: Safranoglou, Ioannis, Alexis Stavroulakis, Jens Pottebaum, Marcel Ebel,
Georgios Lamprinakis, Despina Dimelli, and Katerina Mania. “Augmented Reality
for Real-Time Decision-Making in Flood Emergencies.” In 2024 IEEE International
Symposium on Mixed and Augmented Reality Adjunct (ISMAR-Adjunct). IEEE, 2024.
https://doi.org/10.1109/ISMAR-Adjunct64951.2024.00032.
ieee: 'I. Safranoglou et al., “Augmented Reality for Real-Time Decision-Making
in Flood Emergencies,” presented at the 2024 IEEE International Symposium on Mixed
and Augmented Reality, 2024, doi: https://doi.org/10.1109/ISMAR-Adjunct64951.2024.00032.'
mla: Safranoglou, Ioannis, et al. “Augmented Reality for Real-Time Decision-Making
in Flood Emergencies.” 2024 IEEE International Symposium on Mixed and Augmented
Reality Adjunct (ISMAR-Adjunct), IEEE, 2024, doi:https://doi.org/10.1109/ISMAR-Adjunct64951.2024.00032.
short: 'I. Safranoglou, A. Stavroulakis, J. Pottebaum, M. Ebel, G. Lamprinakis,
D. Dimelli, K. Mania, in: 2024 IEEE International Symposium on Mixed and Augmented
Reality Adjunct (ISMAR-Adjunct), IEEE, 2024.'
conference:
name: 2024 IEEE International Symposium on Mixed and Augmented Reality
date_created: 2024-11-21T10:25:35Z
date_updated: 2026-03-31T02:42:32Z
department:
- _id: '152'
doi: https://doi.org/10.1109/ISMAR-Adjunct64951.2024.00032
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://ieeexplore.ieee.org/abstract/document/10765130
oa: '1'
project:
- _id: '516'
name: 'CREXDATA: CREXDATA: Kritische Maßnahmenplanung über extreme Datenmengen'
publication: 2024 IEEE International Symposium on Mixed and Augmented Reality Adjunct
(ISMAR-Adjunct)
publisher: IEEE
quality_controlled: '1'
status: public
title: Augmented Reality for Real-Time Decision-Making in Flood Emergencies
type: conference
user_id: '405'
year: '2024'
...