---
_id: '51360'
author:
- first_name: 'Lilli Sophia '
full_name: 'Röder, Lilli Sophia '
last_name: Röder
- first_name: Arne
full_name: Gröngröft, Arne
last_name: Gröngröft
- first_name: 'Marcus '
full_name: 'Grünewald, Marcus '
last_name: Grünewald
- first_name: Julia
full_name: Riese, Julia
id: '101499'
last_name: Riese
orcid: 0000-0002-3053-0534
citation:
ama: Röder LS, Gröngröft A, Grünewald M, Riese J. Demand Side Management Implementation
in Downstream Digestate Treatment of a Biomethane Biorefinery. Chemical Engineering
Transactions. 2023;105:421-426. doi:10.3303/CET23105071
apa: Röder, L. S., Gröngröft, A., Grünewald, M., & Riese, J. (2023). Demand
Side Management Implementation in Downstream Digestate Treatment of a Biomethane
Biorefinery. Chemical Engineering Transactions, 105, 421–426. https://doi.org/10.3303/CET23105071
bibtex: '@article{Röder_Gröngröft_Grünewald_Riese_2023, title={Demand Side Management
Implementation in Downstream Digestate Treatment of a Biomethane Biorefinery},
volume={105}, DOI={10.3303/CET23105071},
journal={Chemical Engineering Transactions}, author={Röder, Lilli Sophia and
Gröngröft, Arne and Grünewald, Marcus and Riese, Julia}, year={2023}, pages={421–426}
}'
chicago: 'Röder, Lilli Sophia , Arne Gröngröft, Marcus Grünewald, and Julia Riese.
“Demand Side Management Implementation in Downstream Digestate Treatment of a
Biomethane Biorefinery.” Chemical Engineering Transactions 105 (2023):
421–26. https://doi.org/10.3303/CET23105071.'
ieee: 'L. S. Röder, A. Gröngröft, M. Grünewald, and J. Riese, “Demand Side Management
Implementation in Downstream Digestate Treatment of a Biomethane Biorefinery,”
Chemical Engineering Transactions, vol. 105, pp. 421–426, 2023, doi: 10.3303/CET23105071.'
mla: Röder, Lilli Sophia, et al. “Demand Side Management Implementation in Downstream
Digestate Treatment of a Biomethane Biorefinery.” Chemical Engineering Transactions,
vol. 105, 2023, pp. 421–26, doi:10.3303/CET23105071.
short: L.S. Röder, A. Gröngröft, M. Grünewald, J. Riese, Chemical Engineering Transactions
105 (2023) 421–426.
date_created: 2024-02-16T14:07:51Z
date_updated: 2024-03-08T11:30:32Z
department:
- _id: '145'
doi: 10.3303/CET23105071
intvolume: ' 105'
language:
- iso: eng
page: 421-426
publication: Chemical Engineering Transactions
quality_controlled: '1'
status: public
title: Demand Side Management Implementation in Downstream Digestate Treatment of
a Biomethane Biorefinery
type: journal_article
user_id: '101499'
volume: 105
year: '2023'
...
---
_id: '49580'
abstract:
- lang: eng
text: AbstractThe time‐dependent adjustment of
a system's power demand simultaneously with current power generation is commonly
referred to as demand side management (DSM). DSM strategies are based on the flexibility
to purchase electricity at times when prices are low, which can result in monetary
benefits. One option to increase the flexibility of continuously operated processes
is to oversize them. From an economic point of view, this leads to an increased
investment. DSM only serves an economic purpose if the monetary benefits exceed
this increase in capital costs. The main goal of this contribution is to develop
a decision support tool to help evaluate unit operations regarding their feasibility
for DSM implementation. In a case study, the decision support tool was applied
to show its functionality on a biomethane production plant. The results show that
with the help of the decision support tool, evaluating unit operations concerning
their economic DSM potential is possible.
author:
- first_name: Lilli
full_name: Röder, Lilli
last_name: Röder
- first_name: Hendrik
full_name: Etzold, Hendrik
last_name: Etzold
- first_name: Arne
full_name: Gröngröft, Arne
last_name: Gröngröft
- first_name: Marcus
full_name: Grünewald, Marcus
last_name: Grünewald
- first_name: Julia
full_name: Riese, Julia
id: '101499'
last_name: Riese
orcid: 0000-0002-3053-0534
citation:
ama: Röder L, Etzold H, Gröngröft A, Grünewald M, Riese J. Decision support tool
to determine the suitability of demand side management implementation in continuously
operated processes – A biorefinery case study. Biofuels, Bioproducts and Biorefining.
Published online 2023. doi:10.1002/bbb.2558
apa: Röder, L., Etzold, H., Gröngröft, A., Grünewald, M., & Riese, J. (2023).
Decision support tool to determine the suitability of demand side management implementation
in continuously operated processes – A biorefinery case study. Biofuels, Bioproducts
and Biorefining. https://doi.org/10.1002/bbb.2558
bibtex: '@article{Röder_Etzold_Gröngröft_Grünewald_Riese_2023, title={Decision support
tool to determine the suitability of demand side management implementation in
continuously operated processes – A biorefinery case study}, DOI={10.1002/bbb.2558},
journal={Biofuels, Bioproducts and Biorefining}, publisher={Wiley}, author={Röder,
Lilli and Etzold, Hendrik and Gröngröft, Arne and Grünewald, Marcus and Riese,
Julia}, year={2023} }'
chicago: Röder, Lilli, Hendrik Etzold, Arne Gröngröft, Marcus Grünewald, and Julia
Riese. “Decision Support Tool to Determine the Suitability of Demand Side Management
Implementation in Continuously Operated Processes – A Biorefinery Case Study.”
Biofuels, Bioproducts and Biorefining, 2023. https://doi.org/10.1002/bbb.2558.
ieee: 'L. Röder, H. Etzold, A. Gröngröft, M. Grünewald, and J. Riese, “Decision
support tool to determine the suitability of demand side management implementation
in continuously operated processes – A biorefinery case study,” Biofuels, Bioproducts
and Biorefining, 2023, doi: 10.1002/bbb.2558.'
mla: Röder, Lilli, et al. “Decision Support Tool to Determine the Suitability of
Demand Side Management Implementation in Continuously Operated Processes – A Biorefinery
Case Study.” Biofuels, Bioproducts and Biorefining, Wiley, 2023, doi:10.1002/bbb.2558.
short: L. Röder, H. Etzold, A. Gröngröft, M. Grünewald, J. Riese, Biofuels, Bioproducts
and Biorefining (2023).
date_created: 2023-12-13T11:09:13Z
date_updated: 2024-03-08T11:32:00Z
department:
- _id: '831'
doi: 10.1002/bbb.2558
keyword:
- Renewable Energy
- Sustainability and the Environment
- Bioengineering
language:
- iso: eng
publication: Biofuels, Bioproducts and Biorefining
publication_identifier:
issn:
- 1932-104X
- 1932-1031
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: Decision support tool to determine the suitability of demand side management
implementation in continuously operated processes – A biorefinery case study
type: journal_article
user_id: '101499'
year: '2023'
...
---
_id: '52204'
article_type: review
author:
- first_name: Matteo
full_name: Genovese, Matteo
last_name: Genovese
- first_name: Alexander
full_name: Schlüter, Alexander
id: '103302'
last_name: Schlüter
orcid: 0000-0002-2569-1624
- first_name: Eugenio
full_name: Scionti, Eugenio
last_name: Scionti
- first_name: Francesco
full_name: Piraino, Francesco
last_name: Piraino
- first_name: Orlando
full_name: Corigliano, Orlando
last_name: Corigliano
- first_name: Petronilla
full_name: Fragiacomo, Petronilla
last_name: Fragiacomo
citation:
ama: Genovese M, Schlüter A, Scionti E, Piraino F, Corigliano O, Fragiacomo P. Power-to-hydrogen
and hydrogen-to-X energy systems for the industry of the future in Europe. International
Journal of Hydrogen Energy. 2023;48(44):16545-16568. doi:10.1016/j.ijhydene.2023.01.194
apa: Genovese, M., Schlüter, A., Scionti, E., Piraino, F., Corigliano, O., &
Fragiacomo, P. (2023). Power-to-hydrogen and hydrogen-to-X energy systems for
the industry of the future in Europe. International Journal of Hydrogen Energy,
48(44), 16545–16568. https://doi.org/10.1016/j.ijhydene.2023.01.194
bibtex: '@article{Genovese_Schlüter_Scionti_Piraino_Corigliano_Fragiacomo_2023,
title={Power-to-hydrogen and hydrogen-to-X energy systems for the industry of
the future in Europe}, volume={48}, DOI={10.1016/j.ijhydene.2023.01.194},
number={44}, journal={International Journal of Hydrogen Energy}, publisher={Elsevier
BV}, author={Genovese, Matteo and Schlüter, Alexander and Scionti, Eugenio and
Piraino, Francesco and Corigliano, Orlando and Fragiacomo, Petronilla}, year={2023},
pages={16545–16568} }'
chicago: 'Genovese, Matteo, Alexander Schlüter, Eugenio Scionti, Francesco Piraino,
Orlando Corigliano, and Petronilla Fragiacomo. “Power-to-Hydrogen and Hydrogen-to-X
Energy Systems for the Industry of the Future in Europe.” International Journal
of Hydrogen Energy 48, no. 44 (2023): 16545–68. https://doi.org/10.1016/j.ijhydene.2023.01.194.'
ieee: 'M. Genovese, A. Schlüter, E. Scionti, F. Piraino, O. Corigliano, and P. Fragiacomo,
“Power-to-hydrogen and hydrogen-to-X energy systems for the industry of the future
in Europe,” International Journal of Hydrogen Energy, vol. 48, no. 44,
pp. 16545–16568, 2023, doi: 10.1016/j.ijhydene.2023.01.194.'
mla: Genovese, Matteo, et al. “Power-to-Hydrogen and Hydrogen-to-X Energy Systems
for the Industry of the Future in Europe.” International Journal of Hydrogen
Energy, vol. 48, no. 44, Elsevier BV, 2023, pp. 16545–68, doi:10.1016/j.ijhydene.2023.01.194.
short: M. Genovese, A. Schlüter, E. Scionti, F. Piraino, O. Corigliano, P. Fragiacomo,
International Journal of Hydrogen Energy 48 (2023) 16545–16568.
date_created: 2024-02-29T09:47:57Z
date_updated: 2024-03-08T19:49:10Z
department:
- _id: '9'
- _id: '876'
doi: 10.1016/j.ijhydene.2023.01.194
intvolume: ' 48'
issue: '44'
keyword:
- Hydrogen economy
- Green hydrogen
- Power-to-X
- Hydrogen-to-X
- Sector coupling
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://doi.org/10.1016/j.ijhydene.2023.01.194
oa: '1'
page: 16545-16568
publication: International Journal of Hydrogen Energy
publication_identifier:
issn:
- 0360-3199
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Power-to-hydrogen and hydrogen-to-X energy systems for the industry of the
future in Europe
type: journal_article
user_id: '103302'
volume: 48
year: '2023'
...
---
_id: '40645'
article_type: original
author:
- first_name: Abbas Jarullah Sangoor
full_name: Al-Lami, Abbas Jarullah Sangoor
id: '81772'
last_name: Al-Lami
- first_name: Eugeny
full_name: Kenig, Eugeny
id: '665'
last_name: Kenig
citation:
ama: Al-Lami AJS, Kenig E. Experimental Study of an Internally Channeled Tube Heat
Exchanger under Turbulent Flow Conditions. International Journal of Heat and
Mass Transfer. 2023;214:1-10. doi:10.1016/j.ijheatmasstransfer.2023.124425
apa: Al-Lami, A. J. S., & Kenig, E. (2023). Experimental Study of an Internally
Channeled Tube Heat Exchanger under Turbulent Flow Conditions. International
Journal of Heat and Mass Transfer, 214, 1–10. https://doi.org/10.1016/j.ijheatmasstransfer.2023.124425
bibtex: '@article{Al-Lami_Kenig_2023, title={Experimental Study of an Internally
Channeled Tube Heat Exchanger under Turbulent Flow Conditions}, volume={214},
DOI={10.1016/j.ijheatmasstransfer.2023.124425},
journal={International Journal of Heat and Mass Transfer}, publisher={Elsevier},
author={Al-Lami, Abbas Jarullah Sangoor and Kenig, Eugeny}, year={2023}, pages={1–10}
}'
chicago: 'Al-Lami, Abbas Jarullah Sangoor, and Eugeny Kenig. “Experimental Study
of an Internally Channeled Tube Heat Exchanger under Turbulent Flow Conditions.”
International Journal of Heat and Mass Transfer 214 (2023): 1–10. https://doi.org/10.1016/j.ijheatmasstransfer.2023.124425.'
ieee: 'A. J. S. Al-Lami and E. Kenig, “Experimental Study of an Internally Channeled
Tube Heat Exchanger under Turbulent Flow Conditions,” International Journal
of Heat and Mass Transfer, vol. 214, pp. 1–10, 2023, doi: 10.1016/j.ijheatmasstransfer.2023.124425.'
mla: Al-Lami, Abbas Jarullah Sangoor, and Eugeny Kenig. “Experimental Study of an
Internally Channeled Tube Heat Exchanger under Turbulent Flow Conditions.” International
Journal of Heat and Mass Transfer, vol. 214, Elsevier, 2023, pp. 1–10, doi:10.1016/j.ijheatmasstransfer.2023.124425.
short: A.J.S. Al-Lami, E. Kenig, International Journal of Heat and Mass Transfer
214 (2023) 1–10.
date_created: 2023-01-30T10:05:59Z
date_updated: 2024-03-09T08:34:09Z
doi: 10.1016/j.ijheatmasstransfer.2023.124425
has_accepted_license: '1'
intvolume: ' 214'
language:
- iso: eng
page: 1-10
publication: International Journal of Heat and Mass Transfer
publication_identifier:
unknown:
- 0017-9310
publication_status: published
publisher: Elsevier
quality_controlled: '1'
status: public
title: Experimental Study of an Internally Channeled Tube Heat Exchanger under Turbulent
Flow Conditions
type: journal_article
user_id: '81772'
volume: 214
year: '2023'
...
---
_id: '43090'
abstract:
- lang: eng
text: Abstract. The application of the mechanical joining process clinching
allows the assembly of different sheet metal materials with a wide range of material
thickness configurations, which is of interest for lightweight multi-material
structures. In order to be able to predict the clinched joint properties as a
function of the individual manufacturing steps, current studies focus on numerical
modeling of the entire clinching process chain. It is essential to be able to
take into account the influence of the joining process-induced damage on the load-bearing
capacity of the joint during the loading phase. This study presents a numerical
damage accumulation in the clinching process based on an implemented Hosford-Coulomb
failure model using a 3D clinching process model applied on the aluminum alloy
EN AW-6014 in temper T4. A correspondence of the experimentally determined failure
location with the element of the highest numerically determined damage accumulation
is shown. Moreover, the experimentally determined failure behavior is predicted
to be in agreement in the numerical loading simulation with transferred pre-damage
from the process simulation.
author:
- first_name: Christian Roman
full_name: Bielak, Christian Roman
id: '34782'
last_name: Bielak
- first_name: Max
full_name: Böhnke, Max
id: '45779'
last_name: Böhnke
- first_name: Johannes
full_name: Friedlein, Johannes
last_name: Friedlein
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: Julia
full_name: Mergheim, Julia
last_name: Mergheim
- first_name: Paul
full_name: Steinmann, Paul
last_name: Steinmann
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Bielak CR, Böhnke M, Friedlein J, et al. Numerical analysis of failure modeling
in clinching process chain simulation. In: Materials Research Proceedings.
Materials Research Forum LLC; 2023. doi:10.21741/9781644902417-33'
apa: Bielak, C. R., Böhnke, M., Friedlein, J., Bobbert, M., Mergheim, J., Steinmann,
P., & Meschut, G. (2023). Numerical analysis of failure modeling in clinching
process chain simulation. Materials Research Proceedings. SHEMET 2023.
https://doi.org/10.21741/9781644902417-33
bibtex: '@inproceedings{Bielak_Böhnke_Friedlein_Bobbert_Mergheim_Steinmann_Meschut_2023,
title={Numerical analysis of failure modeling in clinching process chain simulation},
DOI={10.21741/9781644902417-33},
booktitle={Materials Research Proceedings}, publisher={Materials Research Forum
LLC}, author={Bielak, Christian Roman and Böhnke, Max and Friedlein, Johannes
and Bobbert, Mathias and Mergheim, Julia and Steinmann, Paul and Meschut, Gerson},
year={2023} }'
chicago: Bielak, Christian Roman, Max Böhnke, Johannes Friedlein, Mathias Bobbert,
Julia Mergheim, Paul Steinmann, and Gerson Meschut. “Numerical Analysis of Failure
Modeling in Clinching Process Chain Simulation.” In Materials Research Proceedings.
Materials Research Forum LLC, 2023. https://doi.org/10.21741/9781644902417-33.
ieee: 'C. R. Bielak et al., “Numerical analysis of failure modeling in clinching
process chain simulation,” presented at the SHEMET 2023, 2023, doi: 10.21741/9781644902417-33.'
mla: Bielak, Christian Roman, et al. “Numerical Analysis of Failure Modeling in
Clinching Process Chain Simulation.” Materials Research Proceedings, Materials
Research Forum LLC, 2023, doi:10.21741/9781644902417-33.
short: 'C.R. Bielak, M. Böhnke, J. Friedlein, M. Bobbert, J. Mergheim, P. Steinmann,
G. Meschut, in: Materials Research Proceedings, Materials Research Forum LLC,
2023.'
conference:
name: SHEMET 2023
date_created: 2023-03-23T08:13:30Z
date_updated: 2024-03-11T08:14:08Z
department:
- _id: '157'
doi: 10.21741/9781644902417-33
language:
- iso: eng
project:
- _id: '131'
name: 'TRR 285 - A: TRR 285 - Project Area A'
- _id: '135'
name: 'TRR 285 – A01: TRR 285 - Subproject A01'
- _id: '139'
name: 'TRR 285 – A05: TRR 285 - Subproject A05'
publication: Materials Research Proceedings
publication_identifier:
issn:
- 2474-395X
publication_status: published
publisher: Materials Research Forum LLC
quality_controlled: '1'
status: public
title: Numerical analysis of failure modeling in clinching process chain simulation
type: conference
user_id: '45779'
year: '2023'
...
---
_id: '43462'
abstract:
- lang: eng
text: Abstract. In the numerical simulation of mechanical joining technologies
such as clinching, the material modeling of the joining parts is of major importance.
This includes modeling the damage and failure behavior of the materials in accordance
with varying occurring stress states. This paper presents a calibration method
of three different fracture models. The calibration of the models is done by use
of experimental data from a modified punch test, tensile test and bulge test in
order to map the occurring stress states from clinching processes and to precisely
model the resulting failure behavior. Experimental investigations were carried
out for an aluminum alloy EN AW-6014 in temper T4 and compared with the simulative
results generated in LS-DYNA. The comparison of force-displacement curves and
failure initiation shows that the Hosford–Coulomb model predicts the failure behavior
for the material used and the tests applied with the best accuracy.
author:
- first_name: Max
full_name: Böhnke, Max
id: '45779'
last_name: Böhnke
- first_name: Christian Roman
full_name: Bielak, Christian Roman
id: '34782'
last_name: Bielak
- first_name: Johannes
full_name: Friedlein, Johannes
last_name: Friedlein
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: Julia
full_name: Mergheim, Julia
last_name: Mergheim
- first_name: Paul
full_name: Steinmann, Paul
last_name: Steinmann
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Böhnke M, Bielak CR, Friedlein J, et al. A calibration method for failure
modeling in clinching process simulations. In: Materials Research Proceedings.
Materials Research Forum LLC; 2023. doi:10.21741/9781644902417-34'
apa: Böhnke, M., Bielak, C. R., Friedlein, J., Bobbert, M., Mergheim, J., Steinmann,
P., & Meschut, G. (2023). A calibration method for failure modeling in clinching
process simulations. Materials Research Proceedings. https://doi.org/10.21741/9781644902417-34
bibtex: '@inproceedings{Böhnke_Bielak_Friedlein_Bobbert_Mergheim_Steinmann_Meschut_2023,
title={A calibration method for failure modeling in clinching process simulations},
DOI={10.21741/9781644902417-34},
booktitle={Materials Research Proceedings}, publisher={Materials Research Forum
LLC}, author={Böhnke, Max and Bielak, Christian Roman and Friedlein, Johannes
and Bobbert, Mathias and Mergheim, Julia and Steinmann, Paul and Meschut, Gerson},
year={2023} }'
chicago: Böhnke, Max, Christian Roman Bielak, Johannes Friedlein, Mathias Bobbert,
Julia Mergheim, Paul Steinmann, and Gerson Meschut. “A Calibration Method for
Failure Modeling in Clinching Process Simulations.” In Materials Research Proceedings.
Materials Research Forum LLC, 2023. https://doi.org/10.21741/9781644902417-34.
ieee: 'M. Böhnke et al., “A calibration method for failure modeling in clinching
process simulations,” 2023, doi: 10.21741/9781644902417-34.'
mla: Böhnke, Max, et al. “A Calibration Method for Failure Modeling in Clinching
Process Simulations.” Materials Research Proceedings, Materials Research
Forum LLC, 2023, doi:10.21741/9781644902417-34.
short: 'M. Böhnke, C.R. Bielak, J. Friedlein, M. Bobbert, J. Mergheim, P. Steinmann,
G. Meschut, in: Materials Research Proceedings, Materials Research Forum LLC,
2023.'
date_created: 2023-04-13T07:42:53Z
date_updated: 2024-03-11T08:14:53Z
department:
- _id: '157'
doi: 10.21741/9781644902417-34
language:
- iso: eng
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '131'
name: 'TRR 285 - A: TRR 285 - Project Area A'
- _id: '135'
name: 'TRR 285 – A01: TRR 285 - Subproject A01'
- _id: '139'
name: 'TRR 285 – A05: TRR 285 - Subproject A05'
publication: Materials Research Proceedings
publication_identifier:
issn:
- 2474-395X
publication_status: published
publisher: Materials Research Forum LLC
quality_controlled: '1'
status: public
title: A calibration method for failure modeling in clinching process simulations
type: conference
user_id: '45779'
year: '2023'
...
---
_id: '52454'
author:
- first_name: Max
full_name: Böhnke, Max
id: '45779'
last_name: Böhnke
- first_name: Christian Roman
full_name: Bielak, Christian Roman
id: '34782'
last_name: Bielak
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Böhnke M, Bielak CR, Bobbert M, Meschut G. Experimental and Numerical Investigation
of Clinched Joints Under Shear Tensile Loading at High Strain Rates. In: Lecture
Notes in Mechanical Engineering. Springer Nature Switzerland; 2023. doi:10.1007/978-3-031-41341-4_12'
apa: Böhnke, M., Bielak, C. R., Bobbert, M., & Meschut, G. (2023). Experimental
and Numerical Investigation of Clinched Joints Under Shear Tensile Loading at
High Strain Rates. In Lecture Notes in Mechanical Engineering. 14th International
Conference on the Technology of Plasticity. Springer Nature Switzerland. https://doi.org/10.1007/978-3-031-41341-4_12
bibtex: '@inbook{Böhnke_Bielak_Bobbert_Meschut_2023, place={Cham}, title={Experimental
and Numerical Investigation of Clinched Joints Under Shear Tensile Loading at
High Strain Rates}, DOI={10.1007/978-3-031-41341-4_12},
booktitle={Lecture Notes in Mechanical Engineering}, publisher={Springer Nature
Switzerland}, author={Böhnke, Max and Bielak, Christian Roman and Bobbert, Mathias
and Meschut, Gerson}, year={2023} }'
chicago: 'Böhnke, Max, Christian Roman Bielak, Mathias Bobbert, and Gerson Meschut.
“Experimental and Numerical Investigation of Clinched Joints Under Shear Tensile
Loading at High Strain Rates.” In Lecture Notes in Mechanical Engineering.
Cham: Springer Nature Switzerland, 2023. https://doi.org/10.1007/978-3-031-41341-4_12.'
ieee: 'M. Böhnke, C. R. Bielak, M. Bobbert, and G. Meschut, “Experimental and Numerical
Investigation of Clinched Joints Under Shear Tensile Loading at High Strain Rates,”
in Lecture Notes in Mechanical Engineering, Cham: Springer Nature Switzerland,
2023.'
mla: Böhnke, Max, et al. “Experimental and Numerical Investigation of Clinched Joints
Under Shear Tensile Loading at High Strain Rates.” Lecture Notes in Mechanical
Engineering, Springer Nature Switzerland, 2023, doi:10.1007/978-3-031-41341-4_12.
short: 'M. Böhnke, C.R. Bielak, M. Bobbert, G. Meschut, in: Lecture Notes in Mechanical
Engineering, Springer Nature Switzerland, Cham, 2023.'
conference:
name: 14th International Conference on the Technology of Plasticity
date_created: 2024-03-11T08:00:47Z
date_updated: 2024-03-11T08:13:40Z
department:
- _id: '157'
doi: 10.1007/978-3-031-41341-4_12
language:
- iso: eng
place: Cham
project:
- _id: '135'
name: 'TRR 285 – A01: TRR 285 - Subproject A01'
publication: Lecture Notes in Mechanical Engineering
publication_identifier:
isbn:
- '9783031413407'
- '9783031413414'
issn:
- 2195-4356
- 2195-4364
publication_status: published
publisher: Springer Nature Switzerland
quality_controlled: '1'
status: public
title: Experimental and Numerical Investigation of Clinched Joints Under Shear Tensile
Loading at High Strain Rates
type: book_chapter
user_id: '45779'
year: '2023'
...
---
_id: '43463'
author:
- first_name: Johannes
full_name: Friedlein, Johannes
last_name: Friedlein
- first_name: Christian Roman
full_name: Bielak, Christian Roman
id: '34782'
last_name: Bielak
- first_name: Max
full_name: Böhnke, Max
id: '45779'
last_name: Böhnke
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: Julia
full_name: Mergheim, Julia
last_name: Mergheim
- first_name: Paul
full_name: Steinmann, Paul
last_name: Steinmann
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Friedlein J, Bielak CR, Böhnke M, et al. Influence of plastic orthotropy on
clinching of sheet metal. In: Materials Research Proceedings. Materials
Research Forum LLC; 2023. doi:10.21741/9781644902417-17 '
apa: Friedlein, J., Bielak, C. R., Böhnke, M., Bobbert, M., Mergheim, J., Steinmann,
P., & Meschut, G. (2023). Influence of plastic orthotropy on clinching of
sheet metal. Materials Research Proceedings. https://doi.org/10.21741/9781644902417-17
bibtex: '@inproceedings{Friedlein_Bielak_Böhnke_Bobbert_Mergheim_Steinmann_Meschut_2023,
title={Influence of plastic orthotropy on clinching of sheet metal}, DOI={10.21741/9781644902417-17 }, booktitle={Materials Research Proceedings},
publisher={Materials Research Forum LLC}, author={Friedlein, Johannes and Bielak,
Christian Roman and Böhnke, Max and Bobbert, Mathias and Mergheim, Julia and Steinmann,
Paul and Meschut, Gerson}, year={2023} }'
chicago: Friedlein, Johannes, Christian Roman Bielak, Max Böhnke, Mathias Bobbert,
Julia Mergheim, Paul Steinmann, and Gerson Meschut. “Influence of Plastic Orthotropy
on Clinching of Sheet Metal.” In Materials Research Proceedings. Materials
Research Forum LLC, 2023. https://doi.org/10.21741/9781644902417-17
.
ieee: 'J. Friedlein et al., “Influence of plastic orthotropy on clinching
of sheet metal,” 2023, doi: 10.21741/9781644902417-17 .'
mla: Friedlein, Johannes, et al. “Influence of Plastic Orthotropy on Clinching of
Sheet Metal.” Materials Research Proceedings, Materials Research Forum
LLC, 2023, doi:10.21741/9781644902417-17
.
short: 'J. Friedlein, C.R. Bielak, M. Böhnke, M. Bobbert, J. Mergheim, P. Steinmann,
G. Meschut, in: Materials Research Proceedings, Materials Research Forum LLC,
2023.'
date_created: 2023-04-13T07:50:05Z
date_updated: 2024-03-11T08:13:57Z
department:
- _id: '157'
doi: '10.21741/9781644902417-17 '
language:
- iso: eng
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '131'
name: 'TRR 285 - A: TRR 285 - Project Area A'
- _id: '139'
name: 'TRR 285 – A05: TRR 285 - Subproject A05'
- _id: '135'
name: 'TRR 285 – A01: TRR 285 - Subproject A01'
publication: Materials Research Proceedings
publication_status: published
publisher: Materials Research Forum LLC
quality_controlled: '1'
status: public
title: Influence of plastic orthotropy on clinching of sheet metal
type: conference
user_id: '45779'
year: '2023'
...
---
_id: '43031'
abstract:
- lang: eng
text: Abstract. Requirements of multi-material construction involve adjustments
to standard joining techniques. Especially the growing importance of integral
cast components poses additional engineering challenges for the industry. One
approach to achieve these goals are adaptable joining elements formed by friction
spinning. This approach uses friction-induced heat to form customisable joining
elements to join sheets for different boundary conditions, even for brittle cast
materials. It is possible to react immediately to adapt to the joining process
inline and reduce the amount of different joining elements. As the joining partner
serve casting plates of the aluminium casting alloy EN AC–AlSi9, which is processed
in the sand casting. Joining hypoeutectic AlSi alloys constitutes a challenge
because the brittle character of these cause cracks in the joint during conventional
mechanical joining. Furthermore, the friction-induced heat of the novel joining
process causes a finer microstructure in the hypoeutectic AlSi9 casting alloy.
In particular, the eutectic Si is more fine-grained, resulting in higher joint
ductility. This study indicates the joining suitability of a hypoeutectic aluminium
casting alloy in combination with adaptive manufactured additional joining elements.
Here, various mechanical and microstructural investigations validate the influence
of the thermomechanical joining technique. In conclusion, the potential of this
joining process is presented regarding the joinability of cast aluminium components.
author:
- first_name: Thomas
full_name: Borgert, Thomas
id: '83141'
last_name: Borgert
- first_name: Moritz
full_name: Neuser, Moritz
id: '32340'
last_name: Neuser
- first_name: Eugen
full_name: Wiens, Eugen
id: '7888'
last_name: Wiens
- first_name: Olexandr
full_name: Grydin, Olexandr
id: '43822'
last_name: Grydin
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: 'Borgert T, Neuser M, Wiens E, Grydin O, Homberg W, Schaper M. Influence of
thermo-mechanical joining process on the microstructure of a hypoeutectic aluminium
cast alloy. In: Materials Research Proceedings. Vol 25. Materials Research
Forum LLC; 2023:187-194. doi:10.21741/9781644902417-24'
apa: Borgert, T., Neuser, M., Wiens, E., Grydin, O., Homberg, W., & Schaper,
M. (2023). Influence of thermo-mechanical joining process on the microstructure
of a hypoeutectic aluminium cast alloy. Materials Research Proceedings,
25, 187–194. https://doi.org/10.21741/9781644902417-24
bibtex: '@inproceedings{Borgert_Neuser_Wiens_Grydin_Homberg_Schaper_2023, title={Influence
of thermo-mechanical joining process on the microstructure of a hypoeutectic aluminium
cast alloy}, volume={25}, DOI={10.21741/9781644902417-24},
booktitle={Materials Research Proceedings}, publisher={Materials Research Forum
LLC}, author={Borgert, Thomas and Neuser, Moritz and Wiens, Eugen and Grydin,
Olexandr and Homberg, Werner and Schaper, Mirko}, year={2023}, pages={187–194}
}'
chicago: Borgert, Thomas, Moritz Neuser, Eugen Wiens, Olexandr Grydin, Werner Homberg,
and Mirko Schaper. “Influence of Thermo-Mechanical Joining Process on the Microstructure
of a Hypoeutectic Aluminium Cast Alloy.” In Materials Research Proceedings,
25:187–94. Materials Research Forum LLC, 2023. https://doi.org/10.21741/9781644902417-24.
ieee: 'T. Borgert, M. Neuser, E. Wiens, O. Grydin, W. Homberg, and M. Schaper, “Influence
of thermo-mechanical joining process on the microstructure of a hypoeutectic aluminium
cast alloy,” in Materials Research Proceedings, Nürnberg, 2023, vol. 25,
pp. 187–194, doi: 10.21741/9781644902417-24.'
mla: Borgert, Thomas, et al. “Influence of Thermo-Mechanical Joining Process on
the Microstructure of a Hypoeutectic Aluminium Cast Alloy.” Materials Research
Proceedings, vol. 25, Materials Research Forum LLC, 2023, pp. 187–94, doi:10.21741/9781644902417-24.
short: 'T. Borgert, M. Neuser, E. Wiens, O. Grydin, W. Homberg, M. Schaper, in:
Materials Research Proceedings, Materials Research Forum LLC, 2023, pp. 187–194.'
conference:
end_date: 05.04.2023
location: Nürnberg
name: 20th International Conference on Sheet Metal
start_date: 02.04.2023
date_created: 2023-03-16T14:59:01Z
date_updated: 2024-03-14T15:22:17Z
department:
- _id: '156'
- _id: '158'
doi: 10.21741/9781644902417-24
intvolume: ' 25'
language:
- iso: eng
page: 187-194
project:
- _id: '147'
name: 'TRR 285 – C03: TRR 285 - Subproject C03'
- _id: '136'
name: 'TRR 285 – A02: TRR 285 - Subproject A02'
publication: Materials Research Proceedings
publication_identifier:
issn:
- 2474-395X
publication_status: published
publisher: Materials Research Forum LLC
quality_controlled: '1'
status: public
title: Influence of thermo-mechanical joining process on the microstructure of a hypoeutectic
aluminium cast alloy
type: conference
user_id: '32340'
volume: 25
year: '2023'
...
---
_id: '52405'
abstract:
- lang: eng
text: Multi-material designs (MMD) are more frequently used in the automotive
industry. Hereby, the combination of different materials, metal sheets, or cast
components, is mechanically joined, often by forming joining processes. The cast
components mostly used are high-strength, age-hardenable aluminium alloys of the
Al–Si system. Here, the low ductility of the AlSi alloys constitutes a challenge
because their brittle nature causes cracks during the joining process. However,
by using suitable solidification conditions, it is possible to achieve a microstructure
with improved mechanical and joining properties. For this study, we used the twin-roll
casting process (TRC) with water-cooled rollers to manufacture the hypoeutectic
AlSi10Mg for the first time. Hereby, high solidification rates are realisable,
which introduces a microstructure that is about four times finer than in the sand
casting process. In particular, it is shown that a fine microstructure close to
the modification with Na or Sr is achieved by the high solidification rate in
the TRC process without using these elements. Based on this, the mechanical properties
increase, and especially the ductility is enhanced. Subsequent joining investigations
validate the positive influence of a high solidification rate since cracks in
joints can be avoided. Finally, a microstructure-property-joint suitability correlation
is presented.
article_number: '132'
author:
- first_name: Moritz
full_name: Neuser, Moritz
id: '32340'
last_name: Neuser
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
- first_name: Olexandr
full_name: Grydin, Olexandr
id: '43822'
last_name: Grydin
citation:
ama: Neuser M, Schaper M, Grydin O. Mechanical and Microstructure Characterisation
of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll
Casting Process. Journal of Manufacturing and Materials Processing. 2023;7(4).
doi:10.3390/jmmp7040132
apa: Neuser, M., Schaper, M., & Grydin, O. (2023). Mechanical and Microstructure
Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured
by the Twin-Roll Casting Process. Journal of Manufacturing and Materials Processing,
7(4), Article 132. https://doi.org/10.3390/jmmp7040132
bibtex: '@article{Neuser_Schaper_Grydin_2023, title={Mechanical and Microstructure
Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured
by the Twin-Roll Casting Process}, volume={7}, DOI={10.3390/jmmp7040132},
number={4132}, journal={Journal of Manufacturing and Materials Processing}, publisher={MDPI
AG}, author={Neuser, Moritz and Schaper, Mirko and Grydin, Olexandr}, year={2023}
}'
chicago: Neuser, Moritz, Mirko Schaper, and Olexandr Grydin. “Mechanical and Microstructure
Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured
by the Twin-Roll Casting Process.” Journal of Manufacturing and Materials Processing
7, no. 4 (2023). https://doi.org/10.3390/jmmp7040132.
ieee: 'M. Neuser, M. Schaper, and O. Grydin, “Mechanical and Microstructure Characterisation
of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll
Casting Process,” Journal of Manufacturing and Materials Processing, vol.
7, no. 4, Art. no. 132, 2023, doi: 10.3390/jmmp7040132.'
mla: Neuser, Moritz, et al. “Mechanical and Microstructure Characterisation of the
Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll Casting
Process.” Journal of Manufacturing and Materials Processing, vol. 7, no.
4, 132, MDPI AG, 2023, doi:10.3390/jmmp7040132.
short: M. Neuser, M. Schaper, O. Grydin, Journal of Manufacturing and Materials
Processing 7 (2023).
date_created: 2024-03-08T16:09:27Z
date_updated: 2024-03-14T15:21:38Z
department:
- _id: '158'
doi: 10.3390/jmmp7040132
intvolume: ' 7'
issue: '4'
keyword:
- Industrial and Manufacturing Engineering
- Mechanical Engineering
- Mechanics of Materials
language:
- iso: eng
project:
- _id: '136'
name: 'TRR 285 – A02: TRR 285 - Subproject A02'
publication: Journal of Manufacturing and Materials Processing
publication_identifier:
issn:
- 2504-4494
publication_status: published
publisher: MDPI AG
quality_controlled: '1'
status: public
title: Mechanical and Microstructure Characterisation of the Hypoeutectic Cast Aluminium
Alloy AlSi10Mg Manufactured by the Twin-Roll Casting Process
type: journal_article
user_id: '32340'
volume: 7
year: '2023'
...
---
_id: '47535'
abstract:
- lang: eng
text: Consistent lightweight construction in the area of vehicle manufacturing
requires the increased use of multi-material combinations. This, in turn, requires
an adaptation of standard joining techniques. In multi-material combinations,
the importance of integral cast components, in particular, is increasing and poses
additional technical challenges for the industry. One approach to solve these
challenges is adaptable joining elements manufactured by a thermomechanical forming
process. By applying an incremental and thermomechanical joining process, it is
possible to react immediately and adapt the joining process inline to reduce the
number of different joining elements. In the investigation described in this publication,
cast plates made of the cast aluminium alloy EN AC-AlSi9 serve as joining partners,
which are processed by sand casting. The joining process of hypoeutectic AlSi
alloys is challenging as their brittle character leads to cracks in the joint
during conventional mechanical joining. To solve this, the frictional heat of
the novel joining process applied can provide a finer microstructure in the hypoeutectic
AlSi9 cast alloy. In detail, its Si is finer-grained, resulting in higher ductility
of the joint. This study reveals the thermomechanical joining suitability of a
hypoeutectic cast aluminium alloy in combination with adaptively manufactured
auxiliary joining elements.
article_number: '169'
article_type: original
author:
- first_name: Thomas
full_name: Borgert, Thomas
id: '83141'
last_name: Borgert
- first_name: Moritz
full_name: Neuser, Moritz
id: '32340'
last_name: Neuser
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: Borgert T, Neuser M, Hoyer K-P, Homberg W, Schaper M. Thermomechanical Joining
of Hypoeutectic Aluminium Cast Plates. Journal of Manufacturing and Materials
Processing. 2023;7(5). doi:10.3390/jmmp7050169
apa: Borgert, T., Neuser, M., Hoyer, K.-P., Homberg, W., & Schaper, M. (2023).
Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates. Journal of
Manufacturing and Materials Processing, 7(5), Article 169. https://doi.org/10.3390/jmmp7050169
bibtex: '@article{Borgert_Neuser_Hoyer_Homberg_Schaper_2023, title={Thermomechanical
Joining of Hypoeutectic Aluminium Cast Plates}, volume={7}, DOI={10.3390/jmmp7050169},
number={5169}, journal={Journal of Manufacturing and Materials Processing}, publisher={MDPI
AG}, author={Borgert, Thomas and Neuser, Moritz and Hoyer, Kay-Peter and Homberg,
Werner and Schaper, Mirko}, year={2023} }'
chicago: Borgert, Thomas, Moritz Neuser, Kay-Peter Hoyer, Werner Homberg, and Mirko
Schaper. “Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates.” Journal
of Manufacturing and Materials Processing 7, no. 5 (2023). https://doi.org/10.3390/jmmp7050169.
ieee: 'T. Borgert, M. Neuser, K.-P. Hoyer, W. Homberg, and M. Schaper, “Thermomechanical
Joining of Hypoeutectic Aluminium Cast Plates,” Journal of Manufacturing and
Materials Processing, vol. 7, no. 5, Art. no. 169, 2023, doi: 10.3390/jmmp7050169.'
mla: Borgert, Thomas, et al. “Thermomechanical Joining of Hypoeutectic Aluminium
Cast Plates.” Journal of Manufacturing and Materials Processing, vol. 7,
no. 5, 169, MDPI AG, 2023, doi:10.3390/jmmp7050169.
short: T. Borgert, M. Neuser, K.-P. Hoyer, W. Homberg, M. Schaper, Journal of Manufacturing
and Materials Processing 7 (2023).
date_created: 2023-10-02T06:46:53Z
date_updated: 2024-03-14T15:22:06Z
department:
- _id: '156'
- _id: '158'
doi: 10.3390/jmmp7050169
intvolume: ' 7'
issue: '5'
keyword:
- Industrial and Manufacturing Engineering
- Mechanical Engineering
- Mechanics of Materials
language:
- iso: eng
project:
- _id: '147'
name: 'TRR 285 – C03: TRR 285 - Subproject C03'
- _id: '136'
name: 'TRR 285 – A02: TRR 285 - Subproject A02'
publication: Journal of Manufacturing and Materials Processing
publication_identifier:
issn:
- 2504-4494
publication_status: published
publisher: MDPI AG
quality_controlled: '1'
status: public
title: Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates
type: journal_article
user_id: '32340'
volume: 7
year: '2023'
...
---
_id: '52406'
author:
- first_name: Olexandr
full_name: Grydin, Olexandr
id: '43822'
last_name: Grydin
- first_name: Moritz
full_name: Neuser, Moritz
id: '32340'
last_name: Neuser
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: 'Grydin O, Neuser M, Schaper M. Influence of Shell Material on the Microstructure
and Mechanical Properties of Twin-Roll Cast Al-Si-Mg Alloy. In: Conference:
ICTP 2023: Proceedings of the 14th International Conference on the Technology
of Plasticity - Current Trends in the Technology of PlasticityAt: Cannes (France).
Springer Nature Switzerland; 2023. doi:10.1007/978-3-031-41341-4_61'
apa: 'Grydin, O., Neuser, M., & Schaper, M. (2023). Influence of Shell Material
on the Microstructure and Mechanical Properties of Twin-Roll Cast Al-Si-Mg Alloy.
Conference: ICTP 2023: Proceedings of the 14th International Conference
on the Technology of Plasticity - Current Trends in the Technology of PlasticityAt:
Cannes (France). https://doi.org/10.1007/978-3-031-41341-4_61'
bibtex: '@inproceedings{Grydin_Neuser_Schaper_2023, place={Cham}, title={Influence
of Shell Material on the Microstructure and Mechanical Properties of Twin-Roll
Cast Al-Si-Mg Alloy}, DOI={10.1007/978-3-031-41341-4_61},
booktitle={ Conference: ICTP 2023: Proceedings of the 14th International Conference
on the Technology of Plasticity - Current Trends in the Technology of PlasticityAt:
Cannes (France)}, publisher={Springer Nature Switzerland}, author={Grydin, Olexandr
and Neuser, Moritz and Schaper, Mirko}, year={2023} }'
chicago: 'Grydin, Olexandr, Moritz Neuser, and Mirko Schaper. “Influence of Shell
Material on the Microstructure and Mechanical Properties of Twin-Roll Cast Al-Si-Mg
Alloy.” In Conference: ICTP 2023: Proceedings of the 14th International
Conference on the Technology of Plasticity - Current Trends in the Technology
of PlasticityAt: Cannes (France). Cham: Springer Nature Switzerland, 2023.
https://doi.org/10.1007/978-3-031-41341-4_61.'
ieee: 'O. Grydin, M. Neuser, and M. Schaper, “Influence of Shell Material on the
Microstructure and Mechanical Properties of Twin-Roll Cast Al-Si-Mg Alloy,” 2023,
doi: 10.1007/978-3-031-41341-4_61.'
mla: 'Grydin, Olexandr, et al. “Influence of Shell Material on the Microstructure
and Mechanical Properties of Twin-Roll Cast Al-Si-Mg Alloy.” Conference:
ICTP 2023: Proceedings of the 14th International Conference on the Technology
of Plasticity - Current Trends in the Technology of PlasticityAt: Cannes (France),
Springer Nature Switzerland, 2023, doi:10.1007/978-3-031-41341-4_61.'
short: 'O. Grydin, M. Neuser, M. Schaper, in: Conference: ICTP 2023: Proceedings
of the 14th International Conference on the Technology of Plasticity - Current
Trends in the Technology of PlasticityAt: Cannes (France), Springer Nature Switzerland,
Cham, 2023.'
date_created: 2024-03-08T16:11:21Z
date_updated: 2024-03-14T15:21:12Z
department:
- _id: '158'
doi: 10.1007/978-3-031-41341-4_61
language:
- iso: eng
place: Cham
project:
- _id: '136'
name: 'TRR 285 – A02: TRR 285 - Subproject A02'
publication: ' Conference: ICTP 2023: Proceedings of the 14th International Conference
on the Technology of Plasticity - Current Trends in the Technology of PlasticityAt:
Cannes (France)'
publication_identifier:
isbn:
- '9783031413407'
- '9783031413414'
issn:
- 2195-4356
- 2195-4364
publication_status: published
publisher: Springer Nature Switzerland
quality_controlled: '1'
status: public
title: Influence of Shell Material on the Microstructure and Mechanical Properties
of Twin-Roll Cast Al-Si-Mg Alloy
type: conference
user_id: '32340'
year: '2023'
...
---
_id: '48082'
article_type: original
author:
- first_name: Keke
full_name: Yang, Keke
id: '65085'
last_name: Yang
orcid: 0000-0001-9201-9304
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: 'Georg '
full_name: 'Seitz, Georg '
last_name: Seitz
- first_name: Max
full_name: Biegler, Max
last_name: Biegler
- first_name: Michael
full_name: Rethmeier, Michael
last_name: Rethmeier
citation:
ama: Yang K, Meschut G, Seitz G, Biegler M, Rethmeier M. The Identification of a
New Liquid Metal Embrittlement (LME) Type in Resistance Spot Welding of Advanced
High-Strength Steels on Reduced Flange Widths. Metals (Special Issue Embrittlement
Phenomena in Steel Metallurgy). 2023;13(10). doi:10.3390/met13101754
apa: Yang, K., Meschut, G., Seitz, G., Biegler, M., & Rethmeier, M. (2023).
The Identification of a New Liquid Metal Embrittlement (LME) Type in Resistance
Spot Welding of Advanced High-Strength Steels on Reduced Flange Widths. Metals
(Special Issue Embrittlement Phenomena in Steel Metallurgy), 13(10).
https://doi.org/10.3390/met13101754
bibtex: '@article{Yang_Meschut_Seitz_Biegler_Rethmeier_2023, title={The Identification
of a New Liquid Metal Embrittlement (LME) Type in Resistance Spot Welding of Advanced
High-Strength Steels on Reduced Flange Widths}, volume={13}, DOI={10.3390/met13101754},
number={10}, journal={Metals (Special Issue Embrittlement Phenomena in Steel Metallurgy)},
publisher={MDPI}, author={Yang, Keke and Meschut, Gerson and Seitz, Georg and
Biegler, Max and Rethmeier, Michael}, year={2023} }'
chicago: Yang, Keke, Gerson Meschut, Georg Seitz, Max Biegler, and Michael Rethmeier.
“The Identification of a New Liquid Metal Embrittlement (LME) Type in Resistance
Spot Welding of Advanced High-Strength Steels on Reduced Flange Widths.” Metals
(Special Issue Embrittlement Phenomena in Steel Metallurgy) 13, no. 10 (2023).
https://doi.org/10.3390/met13101754.
ieee: 'K. Yang, G. Meschut, G. Seitz, M. Biegler, and M. Rethmeier, “The Identification
of a New Liquid Metal Embrittlement (LME) Type in Resistance Spot Welding of Advanced
High-Strength Steels on Reduced Flange Widths,” Metals (Special Issue Embrittlement
Phenomena in Steel Metallurgy), vol. 13, no. 10, 2023, doi: 10.3390/met13101754.'
mla: Yang, Keke, et al. “The Identification of a New Liquid Metal Embrittlement
(LME) Type in Resistance Spot Welding of Advanced High-Strength Steels on Reduced
Flange Widths.” Metals (Special Issue Embrittlement Phenomena in Steel Metallurgy),
vol. 13, no. 10, MDPI, 2023, doi:10.3390/met13101754.
short: K. Yang, G. Meschut, G. Seitz, M. Biegler, M. Rethmeier, Metals (Special
Issue Embrittlement Phenomena in Steel Metallurgy) 13 (2023).
date_created: 2023-10-16T09:50:11Z
date_updated: 2024-03-18T12:33:26Z
ddc:
- '620'
department:
- _id: '157'
doi: 10.3390/met13101754
file:
- access_level: open_access
content_type: application/pdf
creator: kekeyang
date_created: 2023-10-16T09:50:04Z
date_updated: 2023-10-16T09:50:04Z
file_id: '48083'
file_name: metals-13-01754.pdf
file_size: 4650675
relation: main_file
file_date_updated: 2023-10-16T09:50:04Z
has_accepted_license: '1'
intvolume: ' 13'
issue: '10'
language:
- iso: eng
oa: '1'
publication: Metals (Special Issue Embrittlement Phenomena in Steel Metallurgy)
publication_identifier:
issn:
- 2075-4701
publication_status: published
publisher: MDPI
quality_controlled: '1'
status: public
title: The Identification of a New Liquid Metal Embrittlement (LME) Type in Resistance
Spot Welding of Advanced High-Strength Steels on Reduced Flange Widths
type: journal_article
user_id: '65085'
volume: 13
year: '2023'
...
---
_id: '52656'
author:
- first_name: Stefan
full_name: Thielen, Stefan
last_name: Thielen
- first_name: Sergiy
full_name: Antonyuk, Sergiy
last_name: Antonyuk
- first_name: Jan C.
full_name: Aurich, Jan C.
last_name: Aurich
- first_name: Tilmann
full_name: Beck, Tilmann
last_name: Beck
- first_name: Hans
full_name: Hasse, Hans
last_name: Hasse
- first_name: Michael
full_name: Kopnarski, Michael
last_name: Kopnarski
- first_name: Balázs
full_name: Magyar, Balázs
id: '97759'
last_name: Magyar
- first_name: Bernd
full_name: Sauer, Bernd
last_name: Sauer
- first_name: Marek
full_name: Smaga, Marek
last_name: Smaga
citation:
ama: 'Thielen S, Antonyuk S, Aurich JC, et al. Manufacturing-Morphology-Property
Relationships for Rotating Shaft Sealing Systems. In: Component Surfaces.
Springer International Publishing; 2023. doi:10.1007/978-3-031-35575-2_14'
apa: Thielen, S., Antonyuk, S., Aurich, J. C., Beck, T., Hasse, H., Kopnarski, M.,
Magyar, B., Sauer, B., & Smaga, M. (2023). Manufacturing-Morphology-Property
Relationships for Rotating Shaft Sealing Systems. In Component Surfaces.
Springer International Publishing. https://doi.org/10.1007/978-3-031-35575-2_14
bibtex: '@inbook{Thielen_Antonyuk_Aurich_Beck_Hasse_Kopnarski_Magyar_Sauer_Smaga_2023,
place={Cham}, title={Manufacturing-Morphology-Property Relationships for Rotating
Shaft Sealing Systems}, DOI={10.1007/978-3-031-35575-2_14},
booktitle={Component Surfaces}, publisher={Springer International Publishing},
author={Thielen, Stefan and Antonyuk, Sergiy and Aurich, Jan C. and Beck, Tilmann
and Hasse, Hans and Kopnarski, Michael and Magyar, Balázs and Sauer, Bernd and
Smaga, Marek}, year={2023} }'
chicago: 'Thielen, Stefan, Sergiy Antonyuk, Jan C. Aurich, Tilmann Beck, Hans Hasse,
Michael Kopnarski, Balázs Magyar, Bernd Sauer, and Marek Smaga. “Manufacturing-Morphology-Property
Relationships for Rotating Shaft Sealing Systems.” In Component Surfaces.
Cham: Springer International Publishing, 2023. https://doi.org/10.1007/978-3-031-35575-2_14.'
ieee: 'S. Thielen et al., “Manufacturing-Morphology-Property Relationships
for Rotating Shaft Sealing Systems,” in Component Surfaces, Cham: Springer
International Publishing, 2023.'
mla: Thielen, Stefan, et al. “Manufacturing-Morphology-Property Relationships for
Rotating Shaft Sealing Systems.” Component Surfaces, Springer International
Publishing, 2023, doi:10.1007/978-3-031-35575-2_14.
short: 'S. Thielen, S. Antonyuk, J.C. Aurich, T. Beck, H. Hasse, M. Kopnarski, B.
Magyar, B. Sauer, M. Smaga, in: Component Surfaces, Springer International Publishing,
Cham, 2023.'
date_created: 2024-03-20T08:36:16Z
date_updated: 2024-03-20T08:37:36Z
department:
- _id: '146'
- _id: '9'
doi: 10.1007/978-3-031-35575-2_14
language:
- iso: eng
place: Cham
publication: Component Surfaces
publication_identifier:
isbn:
- '9783031355745'
- '9783031355752'
issn:
- 1860-5168
- 2196-1735
publication_status: published
publisher: Springer International Publishing
quality_controlled: '1'
status: public
title: Manufacturing-Morphology-Property Relationships for Rotating Shaft Sealing
Systems
type: book_chapter
user_id: '97759'
year: '2023'
...
---
_id: '52657'
abstract:
- lang: eng
text: Lubricants play a central role in many technical applications, e.g.
in bearings and gears as well as in machining processes. In such applications,
lubricants are exposed to extreme conditions in the contact area. In lubrication
gaps, the pressure can reach values up to 5 GPa. The thermophysical properties
of lubricants, and in particular the viscosity, at such extreme conditions have
an important influence on the friction and wear behavior of a tribosystem. Accordingly,
reliable lubricant property models are a prerequisite for accurate tribological
simulations, e.g. elastohydrodynamic lubrication (EHL) simulations. Presently,
the vast majority of experimental thermophysical property data are only available
up to 1 GPa. Thus, reliable and robust models with strong extrapolation capabilities
to higher pressure are required. In this work, viscosity measurements of squalane
in a temperature range be tween 20 °C and 100 °C and pressures up to 1 GPa were
carried out. Based on that data, a physical model for the viscosity was developed.
The model is built by combining a molecular-based equation of state with the so-called
entropy scaling approach. Finally, we demonstrate how this fluid property model
can be favorably integrated in an EHL simulation by an application programming
interface (API). The novel hybrid modeling approach is promising for future applications.
author:
- first_name: Patrick
full_name: Wingertszahn, Patrick
last_name: Wingertszahn
- first_name: Sebastian
full_name: Schmitt, Sebastian
last_name: Schmitt
- first_name: Stefan
full_name: Thielen, Stefan
last_name: Thielen
- first_name: Manuel
full_name: Oehler, Manuel
last_name: Oehler
- first_name: Balázs
full_name: Magyar, Balázs
id: '97759'
last_name: Magyar
- first_name: Oliver
full_name: Koch, Oliver
last_name: Koch
- first_name: Hans
full_name: Hasse, Hans
last_name: Hasse
- first_name: Simon
full_name: Stephan, Simon
last_name: Stephan
citation:
ama: Wingertszahn P, Schmitt S, Thielen S, et al. Measurement, Modelling, and Appli
cation of Lubricant Properties at Extreme Pressures. Tribologie und Schmierungstechnik.
2023;70(4-5):5-12. doi:10.24053/tus-2023-0017
apa: Wingertszahn, P., Schmitt, S., Thielen, S., Oehler, M., Magyar, B., Koch, O.,
Hasse, H., & Stephan, S. (2023). Measurement, Modelling, and Appli cation
of Lubricant Properties at Extreme Pressures. Tribologie Und Schmierungstechnik,
70(4–5), 5–12. https://doi.org/10.24053/tus-2023-0017
bibtex: '@article{Wingertszahn_Schmitt_Thielen_Oehler_Magyar_Koch_Hasse_Stephan_2023,
title={Measurement, Modelling, and Appli cation of Lubricant Properties at Extreme
Pressures}, volume={70}, DOI={10.24053/tus-2023-0017},
number={4–5}, journal={Tribologie und Schmierungstechnik}, publisher={Narr Francke
Attempto Verlag GmbH + Co. KG}, author={Wingertszahn, Patrick and Schmitt, Sebastian
and Thielen, Stefan and Oehler, Manuel and Magyar, Balázs and Koch, Oliver and
Hasse, Hans and Stephan, Simon}, year={2023}, pages={5–12} }'
chicago: 'Wingertszahn, Patrick, Sebastian Schmitt, Stefan Thielen, Manuel Oehler,
Balázs Magyar, Oliver Koch, Hans Hasse, and Simon Stephan. “Measurement, Modelling,
and Appli Cation of Lubricant Properties at Extreme Pressures.” Tribologie
Und Schmierungstechnik 70, no. 4–5 (2023): 5–12. https://doi.org/10.24053/tus-2023-0017.'
ieee: 'P. Wingertszahn et al., “Measurement, Modelling, and Appli cation
of Lubricant Properties at Extreme Pressures,” Tribologie und Schmierungstechnik,
vol. 70, no. 4–5, pp. 5–12, 2023, doi: 10.24053/tus-2023-0017.'
mla: Wingertszahn, Patrick, et al. “Measurement, Modelling, and Appli Cation of
Lubricant Properties at Extreme Pressures.” Tribologie Und Schmierungstechnik,
vol. 70, no. 4–5, Narr Francke Attempto Verlag GmbH + Co. KG, 2023, pp. 5–12,
doi:10.24053/tus-2023-0017.
short: P. Wingertszahn, S. Schmitt, S. Thielen, M. Oehler, B. Magyar, O. Koch, H.
Hasse, S. Stephan, Tribologie Und Schmierungstechnik 70 (2023) 5–12.
date_created: 2024-03-20T08:38:12Z
date_updated: 2024-03-20T08:39:44Z
department:
- _id: '146'
- _id: '9'
doi: 10.24053/tus-2023-0017
intvolume: ' 70'
issue: 4-5
keyword:
- Surfaces
- Coatings and Films
- Surfaces and Interfaces
- Mechanical Engineering
- Mechanics of Materials
language:
- iso: eng
page: 5-12
publication: Tribologie und Schmierungstechnik
publication_identifier:
issn:
- 0724-3472
publication_status: published
publisher: Narr Francke Attempto Verlag GmbH + Co. KG
quality_controlled: '1'
status: public
title: Measurement, Modelling, and Appli cation of Lubricant Properties at Extreme
Pressures
type: journal_article
user_id: '97759'
volume: 70
year: '2023'
...
---
_id: '52673'
abstract:
- lang: eng
text: Dieser Beitrag stellt eine rechnergestützte Modellierungsstrategie vor, um
Prozesskettenwissen, wie die Gestaltung der Fertigungsstufen, prozessübergreifende
Fertigungsrestriktionen oder Fertigungshilfsmittel, für die Produktgestaltung
zu formalisieren und im Kontext des Design for Manufacturing für Produkt- und
Prozessgestaltungsentscheidungen bereitzustellen. Dabei werden am Beispiel einer
Tailored-Forming-Prozesskette die Herstellungsschritte einer Multimaterial-Welle
mittels eines Constraint-Satisfaction-Problems (CSP) modelliert, indem die geometrischen
Transformationen einzelner Fertigungsstufen sowie Fertigungsrestriktionen in Form
von Constraints und Fertigungsstufen sowie Fertigungshilfsmittel über Parameter
in den CSP-Variablen formuliert werden. Das CSP ist damit in der Lage, ausgehend
von einem Geometriemodell eines Bauteils eine prozesskettenorientierte Restriktionsprüfung
zur Herstellbarkeitsbewertung durchzuführen und automatisiert Fertigungsstufen
sowie Fertigungshilfsmittel zu konfigurieren.
alternative_title:
- Process chain-oriented manufacturability assessment of products by using a constraint
satisfaction problem
author:
- first_name: Kevin
full_name: Herrmann, Kevin
last_name: Herrmann
- first_name: Felix
full_name: Pusch, Felix
last_name: Pusch
- first_name: Stefan
full_name: Plappert, Stefan
last_name: Plappert
- first_name: 'Behrend '
full_name: 'Bode, Behrend '
last_name: Bode
- first_name: Iryna
full_name: Mozgova, Iryna
id: '95903'
last_name: Mozgova
- first_name: Paul Christoph
full_name: Gembarski, Paul Christoph
last_name: Gembarski
- first_name: Roland
full_name: Lachmayer, Roland
last_name: Lachmayer
citation:
ama: 'Herrmann K, Pusch F, Plappert S, et al. Prozesskettenorientierte Herstellbarkeitsanalyse
von Produkten durch die Nutzung eines Constraint-Satisfaction-Problems. In: Stuttgarter
Symposium Für Produktentwicklung SSP 2023: Tagungsband Zur Konferenz. Stuttgart:
Fraunhofer IAO; 2023:79-90. doi:https://doi.org/10.15488/14221'
apa: 'Herrmann, K., Pusch, F., Plappert, S., Bode, B., Mozgova, I., Gembarski, P.
C., & Lachmayer, R. (2023). Prozesskettenorientierte Herstellbarkeitsanalyse
von Produkten durch die Nutzung eines Constraint-Satisfaction-Problems. Stuttgarter
Symposium Für Produktentwicklung SSP 2023: Tagungsband Zur Konferenz, 79–90.
https://doi.org/10.15488/14221'
bibtex: '@inproceedings{Herrmann_Pusch_Plappert_Bode_Mozgova_Gembarski_Lachmayer_2023,
title={Prozesskettenorientierte Herstellbarkeitsanalyse von Produkten durch die
Nutzung eines Constraint-Satisfaction-Problems}, DOI={https://doi.org/10.15488/14221},
booktitle={Stuttgarter Symposium für Produktentwicklung SSP 2023: Tagungsband
zur Konferenz}, publisher={Stuttgart: Fraunhofer IAO}, author={Herrmann, Kevin
and Pusch, Felix and Plappert, Stefan and Bode, Behrend and Mozgova, Iryna and
Gembarski, Paul Christoph and Lachmayer, Roland}, year={2023}, pages={79–90} }'
chicago: 'Herrmann, Kevin, Felix Pusch, Stefan Plappert, Behrend Bode, Iryna Mozgova,
Paul Christoph Gembarski, and Roland Lachmayer. “Prozesskettenorientierte Herstellbarkeitsanalyse
von Produkten Durch Die Nutzung Eines Constraint-Satisfaction-Problems.” In Stuttgarter
Symposium Für Produktentwicklung SSP 2023: Tagungsband Zur Konferenz, 79–90.
Stuttgart: Fraunhofer IAO, 2023. https://doi.org/10.15488/14221.'
ieee: 'K. Herrmann et al., “Prozesskettenorientierte Herstellbarkeitsanalyse
von Produkten durch die Nutzung eines Constraint-Satisfaction-Problems,” in Stuttgarter
Symposium für Produktentwicklung SSP 2023: Tagungsband zur Konferenz, 2023,
pp. 79–90, doi: https://doi.org/10.15488/14221.'
mla: 'Herrmann, Kevin, et al. “Prozesskettenorientierte Herstellbarkeitsanalyse
von Produkten Durch Die Nutzung Eines Constraint-Satisfaction-Problems.” Stuttgarter
Symposium Für Produktentwicklung SSP 2023: Tagungsband Zur Konferenz, Stuttgart:
Fraunhofer IAO, 2023, pp. 79–90, doi:https://doi.org/10.15488/14221.'
short: 'K. Herrmann, F. Pusch, S. Plappert, B. Bode, I. Mozgova, P.C. Gembarski,
R. Lachmayer, in: Stuttgarter Symposium Für Produktentwicklung SSP 2023: Tagungsband
Zur Konferenz, Stuttgart: Fraunhofer IAO, 2023, pp. 79–90.'
date_created: 2024-03-20T11:04:01Z
date_updated: 2024-03-20T11:21:10Z
department:
- _id: '741'
doi: https://doi.org/10.15488/14221
language:
- iso: eng
page: 79-90
publication: 'Stuttgarter Symposium für Produktentwicklung SSP 2023: Tagungsband zur
Konferenz'
publisher: 'Stuttgart: Fraunhofer IAO'
quality_controlled: '1'
status: public
title: Prozesskettenorientierte Herstellbarkeitsanalyse von Produkten durch die Nutzung
eines Constraint-Satisfaction-Problems
type: conference
user_id: '95903'
year: '2023'
...
---
_id: '52676'
abstract:
- lang: eng
text: AbstractComplex research problems are increasingly
addressed by interdisciplinary, collaborate research projects generating large
amounts of heterogeneous amounts of data. The overarching processing, analysis
and availability of data are critical success factors for these research efforts.
Data repositories enable long term availability of such data for the scientific
community. The findability and therefore reusability strongly builds on comprehensive
annotations of datasets stored in repositories. Often generic metadata schema
are used to annotate data. In this publication we describe the implementation
of discipline specific metadata into a data repository to provide more contextual
information about data. To avoid extra workload for researchers to provide such
metadata a workflow with standardised data templates for automated metadata extraction
during the ingest process has been developed. The enriched metadata are in the
following used in the development of two repository plugins for data comparison
and data visualisation. The added values of discipline-specific annotations and
derived search features to support matching and reusable data is then demonstrated
by use cases of two Collaborative Research Centres (CRC 1368 and CRC 1153).
author:
- first_name: Osman
full_name: Altun, Osman
last_name: Altun
- first_name: Pooya
full_name: Oladazimi, Pooya
last_name: Oladazimi
- first_name: Max Leo
full_name: Wawer, Max Leo
last_name: Wawer
- first_name: Selina
full_name: Raumel, Selina
last_name: Raumel
- first_name: Marc
full_name: Wurz, Marc
last_name: Wurz
- first_name: Khemais
full_name: Barienti, Khemais
last_name: Barienti
- first_name: Florian
full_name: Nürnberger, Florian
last_name: Nürnberger
- first_name: Roland
full_name: Lachmayer, Roland
last_name: Lachmayer
- first_name: Iryna
full_name: Mozgova, Iryna
last_name: Mozgova
- first_name: Oliver
full_name: Koepler, Oliver
last_name: Koepler
- first_name: Sören
full_name: Auer, Sören
last_name: Auer
citation:
ama: Altun O, Oladazimi P, Wawer ML, et al. ENHANCED FINDABILITY AND REUSABILITY
OF ENGINEERING DATA BY CONTEXTUAL METADATA. Proceedings of the Design Society.
2023;3:1635-1644. doi:10.1017/pds.2023.164
apa: Altun, O., Oladazimi, P., Wawer, M. L., Raumel, S., Wurz, M., Barienti, K.,
Nürnberger, F., Lachmayer, R., Mozgova, I., Koepler, O., & Auer, S. (2023).
ENHANCED FINDABILITY AND REUSABILITY OF ENGINEERING DATA BY CONTEXTUAL METADATA.
Proceedings of the Design Society, 3, 1635–1644. https://doi.org/10.1017/pds.2023.164
bibtex: '@article{Altun_Oladazimi_Wawer_Raumel_Wurz_Barienti_Nürnberger_Lachmayer_Mozgova_Koepler_et
al._2023, title={ENHANCED FINDABILITY AND REUSABILITY OF ENGINEERING DATA BY CONTEXTUAL
METADATA}, volume={3}, DOI={10.1017/pds.2023.164},
journal={Proceedings of the Design Society}, publisher={Cambridge University Press
(CUP)}, author={Altun, Osman and Oladazimi, Pooya and Wawer, Max Leo and Raumel,
Selina and Wurz, Marc and Barienti, Khemais and Nürnberger, Florian and Lachmayer,
Roland and Mozgova, Iryna and Koepler, Oliver and et al.}, year={2023}, pages={1635–1644}
}'
chicago: 'Altun, Osman, Pooya Oladazimi, Max Leo Wawer, Selina Raumel, Marc Wurz,
Khemais Barienti, Florian Nürnberger, et al. “ENHANCED FINDABILITY AND REUSABILITY
OF ENGINEERING DATA BY CONTEXTUAL METADATA.” Proceedings of the Design Society
3 (2023): 1635–44. https://doi.org/10.1017/pds.2023.164.'
ieee: 'O. Altun et al., “ENHANCED FINDABILITY AND REUSABILITY OF ENGINEERING
DATA BY CONTEXTUAL METADATA,” Proceedings of the Design Society, vol. 3,
pp. 1635–1644, 2023, doi: 10.1017/pds.2023.164.'
mla: Altun, Osman, et al. “ENHANCED FINDABILITY AND REUSABILITY OF ENGINEERING DATA
BY CONTEXTUAL METADATA.” Proceedings of the Design Society, vol. 3, Cambridge
University Press (CUP), 2023, pp. 1635–44, doi:10.1017/pds.2023.164.
short: O. Altun, P. Oladazimi, M.L. Wawer, S. Raumel, M. Wurz, K. Barienti, F. Nürnberger,
R. Lachmayer, I. Mozgova, O. Koepler, S. Auer, Proceedings of the Design Society
3 (2023) 1635–1644.
date_created: 2024-03-20T11:06:17Z
date_updated: 2024-03-20T11:20:56Z
department:
- _id: '741'
doi: 10.1017/pds.2023.164
intvolume: ' 3'
language:
- iso: eng
page: 1635-1644
publication: Proceedings of the Design Society
publication_identifier:
issn:
- 2732-527X
publication_status: published
publisher: Cambridge University Press (CUP)
quality_controlled: '1'
status: public
title: ENHANCED FINDABILITY AND REUSABILITY OF ENGINEERING DATA BY CONTEXTUAL METADATA
type: journal_article
user_id: '95903'
volume: 3
year: '2023'
...
---
_id: '52677'
abstract:
- lang: eng
text: "Several modules in automotive are usually modified and adapted for various
project-specific applications. Due to a\r\nstandardized safety concept a high
reusability is accessible. A safety element out of context (SEooC) according to
ISO 26262 can be a suitable approach. Based on the same safety concept and analysis,
common modules can reach high reusability. For developing according to a module
out of context, an appropriate and detailed development approach is required.
This paper shows how to deduce this development processes for platform modules.
Therefore, the detailed\r\napproach of the SEooC is derived. The aim is to create
a detailed workflow for all phases of the development and integration of any kind
of system modules. As an application example, an automotive project for an actuator
control module is considered."
author:
- first_name: H.
full_name: Noun, H.
last_name: Noun
- first_name: Iryna
full_name: Mozgova, Iryna
id: '95903'
last_name: Mozgova
- first_name: M.
full_name: Abdelfattah, M.
last_name: Abdelfattah
- first_name: G.
full_name: Zeller, G.
last_name: Zeller
- first_name: G.
full_name: Rajesh, G.
last_name: Rajesh
- first_name: R.
full_name: Lachmayer, R.
last_name: Lachmayer
citation:
ama: Noun H, Mozgova I, Abdelfattah M, Zeller G, Rajesh G, Lachmayer R. Approach
for a Safety Element out of Context for an Actuator Circuit Control Module. International
Journal of Industrial and Manufacturing Engineering. 2023;17(6):237-243.
apa: Noun, H., Mozgova, I., Abdelfattah, M., Zeller, G., Rajesh, G., & Lachmayer,
R. (2023). Approach for a Safety Element out of Context for an Actuator Circuit
Control Module. International Journal of Industrial and Manufacturing Engineering,
17(6), 237–243.
bibtex: '@article{Noun_Mozgova_Abdelfattah_Zeller_Rajesh_Lachmayer_2023, title={Approach
for a Safety Element out of Context for an Actuator Circuit Control Module}, volume={17},
number={6}, journal={International Journal of Industrial and Manufacturing Engineering},
author={Noun, H. and Mozgova, Iryna and Abdelfattah, M. and Zeller, G. and Rajesh,
G. and Lachmayer, R.}, year={2023}, pages={237–243} }'
chicago: 'Noun, H., Iryna Mozgova, M. Abdelfattah, G. Zeller, G. Rajesh, and R.
Lachmayer. “Approach for a Safety Element out of Context for an Actuator Circuit
Control Module.” International Journal of Industrial and Manufacturing Engineering
17, no. 6 (2023): 237–43.'
ieee: H. Noun, I. Mozgova, M. Abdelfattah, G. Zeller, G. Rajesh, and R. Lachmayer,
“Approach for a Safety Element out of Context for an Actuator Circuit Control
Module,” International Journal of Industrial and Manufacturing Engineering,
vol. 17, no. 6, pp. 237–243, 2023.
mla: Noun, H., et al. “Approach for a Safety Element out of Context for an Actuator
Circuit Control Module.” International Journal of Industrial and Manufacturing
Engineering, vol. 17, no. 6, 2023, pp. 237–43.
short: H. Noun, I. Mozgova, M. Abdelfattah, G. Zeller, G. Rajesh, R. Lachmayer,
International Journal of Industrial and Manufacturing Engineering 17 (2023) 237–243.
date_created: 2024-03-20T11:17:57Z
date_updated: 2024-03-20T11:20:43Z
department:
- _id: '741'
intvolume: ' 17'
issue: '6'
language:
- iso: eng
page: 237-243
publication: International Journal of Industrial and Manufacturing Engineering
publication_status: published
quality_controlled: '1'
status: public
title: Approach for a Safety Element out of Context for an Actuator Circuit Control
Module
type: journal_article
user_id: '95903'
volume: 17
year: '2023'
...
---
_id: '46036'
author:
- first_name: Niklas
full_name: Sänger, Niklas
id: '49812'
last_name: Sänger
citation:
ama: 'Sänger N. Didaktische Fallstudien zur exemplarischen Erkundung der digitalen
Transformation der Arbeits- und Geschäftsprozesse im Studienfach Wirtschaftswissenschaft
für das Lehramt an Berufskollegs. In: ; 2023.'
apa: Sänger, N. (2023). Didaktische Fallstudien zur exemplarischen Erkundung
der digitalen Transformation der Arbeits- und Geschäftsprozesse im Studienfach
Wirtschaftswissenschaft für das Lehramt an Berufskollegs. Jahrestagung der
Deutschen Gesellschaft für Ökonomische Bildung (DeGÖB), Tübingen.
bibtex: '@inproceedings{Sänger_2023, title={Didaktische Fallstudien zur exemplarischen
Erkundung der digitalen Transformation der Arbeits- und Geschäftsprozesse im Studienfach
Wirtschaftswissenschaft für das Lehramt an Berufskollegs}, author={Sänger, Niklas},
year={2023} }'
chicago: Sänger, Niklas. “Didaktische Fallstudien Zur Exemplarischen Erkundung Der
Digitalen Transformation Der Arbeits- Und Geschäftsprozesse Im Studienfach Wirtschaftswissenschaft
Für Das Lehramt an Berufskollegs,” 2023.
ieee: N. Sänger, “Didaktische Fallstudien zur exemplarischen Erkundung der digitalen
Transformation der Arbeits- und Geschäftsprozesse im Studienfach Wirtschaftswissenschaft
für das Lehramt an Berufskollegs,” presented at the Jahrestagung der Deutschen
Gesellschaft für Ökonomische Bildung (DeGÖB), Tübingen, 2023.
mla: Sänger, Niklas. Didaktische Fallstudien Zur Exemplarischen Erkundung Der
Digitalen Transformation Der Arbeits- Und Geschäftsprozesse Im Studienfach Wirtschaftswissenschaft
Für Das Lehramt an Berufskollegs. 2023.
short: 'N. Sänger, in: 2023.'
conference:
end_date: 2023-02-15
location: Tübingen
name: Jahrestagung der Deutschen Gesellschaft für Ökonomische Bildung (DeGÖB)
start_date: 2023-02-13
date_created: 2023-07-13T08:26:15Z
date_updated: 2024-03-21T15:19:09Z
department:
- _id: '208'
language:
- iso: eng
quality_controlled: '1'
status: public
title: Didaktische Fallstudien zur exemplarischen Erkundung der digitalen Transformation
der Arbeits- und Geschäftsprozesse im Studienfach Wirtschaftswissenschaft für das
Lehramt an Berufskollegs
type: conference
user_id: '49812'
year: '2023'
...
---
_id: '48535'
author:
- first_name: Niklas
full_name: Sänger, Niklas
id: '49812'
last_name: Sänger
citation:
ama: 'Sänger N. Technological Pedagogical Content Framework for the Vocational Teacher
Education in Germany. In: ; 2023.'
apa: Sänger, N. (2023). Technological Pedagogical Content Framework for the Vocational
Teacher Education in Germany. JURE EARLI, Thessaloniki, Griechenland.
bibtex: '@inproceedings{Sänger_2023, title={Technological Pedagogical Content Framework
for the Vocational Teacher Education in Germany}, author={Sänger, Niklas}, year={2023}
}'
chicago: Sänger, Niklas. “Technological Pedagogical Content Framework for the Vocational
Teacher Education in Germany,” 2023.
ieee: N. Sänger, “Technological Pedagogical Content Framework for the Vocational
Teacher Education in Germany,” presented at the JURE EARLI, Thessaloniki, Griechenland,
2023.
mla: Sänger, Niklas. Technological Pedagogical Content Framework for the Vocational
Teacher Education in Germany. 2023.
short: 'N. Sänger, in: 2023.'
conference:
end_date: 2023-08-21
location: Thessaloniki, Griechenland
name: JURE EARLI
start_date: 2023-08-20
date_created: 2023-10-28T17:46:43Z
date_updated: 2024-03-21T15:19:17Z
department:
- _id: '208'
language:
- iso: eng
quality_controlled: '1'
status: public
title: Technological Pedagogical Content Framework for the Vocational Teacher Education
in Germany
type: conference
user_id: '49812'
year: '2023'
...