[{"user_id":"43720","article_type":"original","abstract":[{"text":"Al-Li based alloys are attractive materials for the aerospace industry. The twin-roll casting of such materials could provide properties not achievable by conventional direct-chill casting and downstream processing methods due to significantly higher solidification rates. An Al-Li-Cu-Mg-Zr alloy was twin-roll cast with the same alloy containing a small addition of Sc. The microstructure of as-cast materials and the influence of Sc on the behavior of the alloy at elevated temperatures were studied by means of light and electron microscopy and by resistivity measurements. A fine-grained structure was formed during twin-roll casting, but several surface and internal defects were found on the strips, which should be suppressed by a further adjustment of the casting conditions. The addition of Sc had a positive effect on grain size uniformity and microstructure stabilization at elevated temperatures, as shown by the precipitation of a fine dispersion of coherent Sc- and Zr-containing precipitates.","lang":"eng"}],"status":"public","date_created":"2021-09-16T16:24:50Z","volume":10,"quality_controlled":"1","author":[{"first_name":"Olexandr","full_name":"Grydin, Olexandr","last_name":"Grydin","id":"43822"},{"full_name":"Stolbchenko, Mykhailo","first_name":"Mykhailo","last_name":"Stolbchenko"},{"full_name":"Schaper, Mirko","first_name":"Mirko","id":"43720","last_name":"Schaper"},{"full_name":"Belejová, Sára","first_name":"Sára","last_name":"Belejová"},{"full_name":"Králík, Rostislav","first_name":"Rostislav","last_name":"Králík"},{"last_name":"Bajtošová","first_name":"Lucia","full_name":"Bajtošová, Lucia"},{"full_name":"Křivská, Barbora","first_name":"Barbora","last_name":"Křivská"},{"first_name":"Michal","full_name":"Hájek, Michal","last_name":"Hájek"},{"first_name":"Miroslav","full_name":"Cieslar, Miroslav","last_name":"Cieslar"}],"publication":"Metals","issue":"8","article_number":"987","intvolume":" 10","_id":"24573","type":"journal_article","year":"2020","citation":{"apa":"Grydin, O., Stolbchenko, M., Schaper, M., Belejová, S., Králík, R., Bajtošová, L., Křivská, B., Hájek, M., & Cieslar, M. (2020). New Twin-Roll Cast Al-Li Based Alloys for High-Strength Applications. Metals, 10(8), Article 987. https://doi.org/10.3390/met10080987","ama":"Grydin O, Stolbchenko M, Schaper M, et al. New Twin-Roll Cast Al-Li Based Alloys for High-Strength Applications. Metals. 2020;10(8). doi:10.3390/met10080987","chicago":"Grydin, Olexandr, Mykhailo Stolbchenko, Mirko Schaper, Sára Belejová, Rostislav Králík, Lucia Bajtošová, Barbora Křivská, Michal Hájek, and Miroslav Cieslar. “New Twin-Roll Cast Al-Li Based Alloys for High-Strength Applications.” Metals 10, no. 8 (2020). https://doi.org/10.3390/met10080987.","bibtex":"@article{Grydin_Stolbchenko_Schaper_Belejová_Králík_Bajtošová_Křivská_Hájek_Cieslar_2020, title={New Twin-Roll Cast Al-Li Based Alloys for High-Strength Applications}, volume={10}, DOI={10.3390/met10080987}, number={8987}, journal={Metals}, author={Grydin, Olexandr and Stolbchenko, Mykhailo and Schaper, Mirko and Belejová, Sára and Králík, Rostislav and Bajtošová, Lucia and Křivská, Barbora and Hájek, Michal and Cieslar, Miroslav}, year={2020} }","mla":"Grydin, Olexandr, et al. “New Twin-Roll Cast Al-Li Based Alloys for High-Strength Applications.” Metals, vol. 10, no. 8, 987, 2020, doi:10.3390/met10080987.","short":"O. Grydin, M. Stolbchenko, M. Schaper, S. Belejová, R. Králík, L. Bajtošová, B. Křivská, M. Hájek, M. Cieslar, Metals 10 (2020).","ieee":"O. Grydin et al., “New Twin-Roll Cast Al-Li Based Alloys for High-Strength Applications,” Metals, vol. 10, no. 8, Art. no. 987, 2020, doi: 10.3390/met10080987."},"main_file_link":[{"url":"https://www.mdpi.com/2075-4701/10/8/987/htm","open_access":"1"}],"title":"New Twin-Roll Cast Al-Li Based Alloys for High-Strength Applications","publication_status":"published","publication_identifier":{"issn":["2075-4701"]},"department":[{"_id":"158"}],"oa":"1","doi":"10.3390/met10080987","date_updated":"2023-06-01T14:30:52Z","language":[{"iso":"eng"}]},{"citation":{"short":"K. Engelkemeier, J. Lindner, J. Bürger, K. Vaupel, M. Hartmann, M. Tiemann, K.-P. Hoyer, M. Schaper, Nanotechnology 31 (2020) 095701.","ieee":"K. Engelkemeier et al., “Nano-architectural complexity of zinc oxide nanowall hollow microspheres and their structural properties,” Nanotechnology, vol. 31, p. 095701, 2020, doi: 10.1088/1361-6528/ab55bc.","chicago":"Engelkemeier, Katja, Jörg Lindner, Julius Bürger, Kathrin Vaupel, Marc Hartmann, Michael Tiemann, Kay-Peter Hoyer, and Mirko Schaper. “Nano-Architectural Complexity of Zinc Oxide Nanowall Hollow Microspheres and Their Structural Properties.” Nanotechnology 31 (2020): 095701. https://doi.org/10.1088/1361-6528/ab55bc.","ama":"Engelkemeier K, Lindner J, Bürger J, et al. Nano-architectural complexity of zinc oxide nanowall hollow microspheres and their structural properties. Nanotechnology. 2020;31:095701. doi:10.1088/1361-6528/ab55bc","apa":"Engelkemeier, K., Lindner, J., Bürger, J., Vaupel, K., Hartmann, M., Tiemann, M., Hoyer, K.-P., & Schaper, M. (2020). Nano-architectural complexity of zinc oxide nanowall hollow microspheres and their structural properties. Nanotechnology, 31, 095701. https://doi.org/10.1088/1361-6528/ab55bc","mla":"Engelkemeier, Katja, et al. “Nano-Architectural Complexity of Zinc Oxide Nanowall Hollow Microspheres and Their Structural Properties.” Nanotechnology, vol. 31, 2020, p. 095701, doi:10.1088/1361-6528/ab55bc.","bibtex":"@article{Engelkemeier_Lindner_Bürger_Vaupel_Hartmann_Tiemann_Hoyer_Schaper_2020, title={Nano-architectural complexity of zinc oxide nanowall hollow microspheres and their structural properties}, volume={31}, DOI={10.1088/1361-6528/ab55bc}, journal={Nanotechnology}, author={Engelkemeier, Katja and Lindner, Jörg and Bürger, Julius and Vaupel, Kathrin and Hartmann, Marc and Tiemann, Michael and Hoyer, Kay-Peter and Schaper, Mirko}, year={2020}, pages={095701} }"},"type":"journal_article","year":"2020","page":"095701","_id":"24100","intvolume":" 31","status":"public","date_created":"2021-09-10T06:49:55Z","volume":31,"author":[{"last_name":"Engelkemeier","id":"21743","first_name":"Katja","full_name":"Engelkemeier, Katja"},{"full_name":"Lindner, Jörg","first_name":"Jörg","id":"20797","last_name":"Lindner"},{"first_name":"Julius","full_name":"Bürger, Julius","last_name":"Bürger","id":"46952"},{"first_name":"Kathrin","full_name":"Vaupel, Kathrin","last_name":"Vaupel"},{"last_name":"Hartmann","first_name":"Marc","full_name":"Hartmann, Marc"},{"last_name":"Tiemann","id":"23547","first_name":"Michael","full_name":"Tiemann, Michael","orcid":"0000-0003-1711-2722"},{"last_name":"Hoyer","id":"48411","first_name":"Kay-Peter","full_name":"Hoyer, Kay-Peter"},{"last_name":"Schaper","id":"43720","first_name":"Mirko","full_name":"Schaper, Mirko"}],"quality_controlled":"1","publication":"Nanotechnology","user_id":"43720","article_type":"original","abstract":[{"lang":"eng","text":"Zinc oxide (ZnO) hollow spheres with defined morphology and micro-/nanostructure are prepared by a hydrothermal synthesis approach. The materials possess fine-leaved structures at their particle surface (nanowall hollow micro spheres). Morphology control is achieved by citric acid used as an additive in variable relative quantities during the synthesis. The structure formation is studied by various time-dependent ex situ methods, such as scanning electron microscopy, x-ray diffraction, and Raman spectroscopy. The fine-leaved surface structure is characterized by high-resolution transmission electron microscopy techniques (HRTEM, STEM), using a high-angle annular dark field detector, as well as by differential phase contrast analysis. In-depth structural characterization of the nanowalls by drop-by-drop ex situ FE-SEM analysis provides insight into possible structure formation mechanisms. Further investigation addresses the thermal stability of the particle morphology and the enhancement of the surface-to-volume ratio by heat treatment (examined by N2 physisorption)."}],"language":[{"iso":"eng"}],"doi":"10.1088/1361-6528/ab55bc","date_updated":"2023-06-01T14:29:58Z","publication_status":"published","publication_identifier":{"issn":["0957-4484","1361-6528"]},"department":[{"_id":"9"},{"_id":"158"},{"_id":"301"},{"_id":"286"},{"_id":"35"},{"_id":"307"},{"_id":"2"}],"title":"Nano-architectural complexity of zinc oxide nanowall hollow microspheres and their structural properties"},{"year":"2020","citation":{"bibtex":"@article{Stolbchenko_Makeieva_Grydin_Frolov_Schaper_2020, title={Strain parameters at hot rolling of aluminum strips reinforced with steel netting}, volume={22}, DOI={10.1177/1099636218792539}, number={6}, journal={Journal of Sandwich Structures & Materials}, author={Stolbchenko, Mykhailo and Makeieva, Hanna and Grydin, Olexandr and Frolov, Yaroslav and Schaper, Mirko}, year={2020}, pages={2009–2029} }","mla":"Stolbchenko, Mykhailo, et al. “Strain Parameters at Hot Rolling of Aluminum Strips Reinforced with Steel Netting.” Journal of Sandwich Structures & Materials, vol. 22, no. 6, 2020, pp. 2009–29, doi:10.1177/1099636218792539.","chicago":"Stolbchenko, Mykhailo, Hanna Makeieva, Olexandr Grydin, Yaroslav Frolov, and Mirko Schaper. “Strain Parameters at Hot Rolling of Aluminum Strips Reinforced with Steel Netting.” Journal of Sandwich Structures & Materials 22, no. 6 (2020): 2009–29. https://doi.org/10.1177/1099636218792539.","apa":"Stolbchenko, M., Makeieva, H., Grydin, O., Frolov, Y., & Schaper, M. (2020). Strain parameters at hot rolling of aluminum strips reinforced with steel netting. Journal of Sandwich Structures & Materials, 22(6), 2009–2029. https://doi.org/10.1177/1099636218792539","ama":"Stolbchenko M, Makeieva H, Grydin O, Frolov Y, Schaper M. Strain parameters at hot rolling of aluminum strips reinforced with steel netting. Journal of Sandwich Structures & Materials. 2020;22(6):2009-2029. doi:10.1177/1099636218792539","ieee":"M. Stolbchenko, H. Makeieva, O. Grydin, Y. Frolov, and M. Schaper, “Strain parameters at hot rolling of aluminum strips reinforced with steel netting,” Journal of Sandwich Structures & Materials, vol. 22, no. 6, pp. 2009–2029, 2020, doi: 10.1177/1099636218792539.","short":"M. Stolbchenko, H. Makeieva, O. Grydin, Y. Frolov, M. Schaper, Journal of Sandwich Structures & Materials 22 (2020) 2009–2029."},"type":"journal_article","page":"2009-2029","_id":"24572","intvolume":" 22","issue":"6","author":[{"last_name":"Stolbchenko","first_name":"Mykhailo","full_name":"Stolbchenko, Mykhailo"},{"last_name":"Makeieva","full_name":"Makeieva, Hanna","first_name":"Hanna"},{"id":"43822","last_name":"Grydin","full_name":"Grydin, Olexandr","first_name":"Olexandr"},{"full_name":"Frolov, Yaroslav","first_name":"Yaroslav","last_name":"Frolov"},{"full_name":"Schaper, Mirko","first_name":"Mirko","id":"43720","last_name":"Schaper"}],"quality_controlled":"1","publication":"Journal of Sandwich Structures & Materials","volume":22,"status":"public","date_created":"2021-09-16T16:23:44Z","abstract":[{"lang":"eng","text":" This experiment studied the strain parameters of rolling an aluminum matrix when wire netting is inserted between aluminum layers. During the experiment, two types of stainless steel fabric netting oriented parallel and diagonal to the rolling axis were placed between two aluminum strips and rolled. Multiple rolling processes were performed in which the temperature and pressure on the material were varied to produce bonding of matrix layers. During the study, the following main investigations were made: strain on areas of longitudinal and transverse cross sections of the composite was measured; stretching and ovalization of net wiring and changes in the net cell angles were determined; mechanical properties of composites along the rolling direction were tested. The main contradiction resulting from this experiment was as follows: the contact pressure required for the bonding of aluminum layers produces extreme tensile strain on the inserted net wires, reducing the mechanical properties of the reinforcing net and thus reducing properties of the entire composite. Optimal results in the longitudinal tension tests were achieved by using strips with diagonally oriented net-reinforcement. "}],"user_id":"43720","language":[{"iso":"eng"}],"date_updated":"2023-06-01T14:30:38Z","doi":"10.1177/1099636218792539","department":[{"_id":"158"}],"publication_identifier":{"issn":["1099-6362","1530-7972"]},"publication_status":"published","title":"Strain parameters at hot rolling of aluminum strips reinforced with steel netting"},{"user_id":"43720","status":"public","date_created":"2023-02-02T14:42:11Z","volume":794,"quality_controlled":"1","author":[{"full_name":"Wu, Haoran","first_name":"Haoran","last_name":"Wu"},{"last_name":"Bill","full_name":"Bill, T.","first_name":"T."},{"last_name":"Teng","first_name":"Z.J.","full_name":"Teng, Z.J."},{"first_name":"Sudipta","full_name":"Pramanik, Sudipta","last_name":"Pramanik"},{"full_name":"Hoyer, Kay-Peter","first_name":"Kay-Peter","id":"48411","last_name":"Hoyer"},{"id":"43720","last_name":"Schaper","full_name":"Schaper, Mirko","first_name":"Mirko"},{"last_name":"Starke","first_name":"Peter","full_name":"Starke, Peter"}],"publisher":"Elsevier BV","keyword":["Mechanical Engineering","Mechanics of Materials","Condensed Matter Physics","General Materials Science"],"publication":"Materials Science and Engineering: A","article_number":"139597","intvolume":" 794","_id":"41520","type":"journal_article","citation":{"ieee":"H. Wu et al., “Characterization of the fatigue behaviour for SAE 1045 steel without and with load-free sequences based on non-destructive, X-ray diffraction and transmission electron microscopic investigations,” Materials Science and Engineering: A, vol. 794, Art. no. 139597, 2020, doi: 10.1016/j.msea.2020.139597.","short":"H. Wu, T. Bill, Z.J. Teng, S. Pramanik, K.-P. Hoyer, M. Schaper, P. Starke, Materials Science and Engineering: A 794 (2020).","bibtex":"@article{Wu_Bill_Teng_Pramanik_Hoyer_Schaper_Starke_2020, title={Characterization of the fatigue behaviour for SAE 1045 steel without and with load-free sequences based on non-destructive, X-ray diffraction and transmission electron microscopic investigations}, volume={794}, DOI={10.1016/j.msea.2020.139597}, number={139597}, journal={Materials Science and Engineering: A}, publisher={Elsevier BV}, author={Wu, Haoran and Bill, T. and Teng, Z.J. and Pramanik, Sudipta and Hoyer, Kay-Peter and Schaper, Mirko and Starke, Peter}, year={2020} }","mla":"Wu, Haoran, et al. “Characterization of the Fatigue Behaviour for SAE 1045 Steel without and with Load-Free Sequences Based on Non-Destructive, X-Ray Diffraction and Transmission Electron Microscopic Investigations.” Materials Science and Engineering: A, vol. 794, 139597, Elsevier BV, 2020, doi:10.1016/j.msea.2020.139597.","ama":"Wu H, Bill T, Teng ZJ, et al. Characterization of the fatigue behaviour for SAE 1045 steel without and with load-free sequences based on non-destructive, X-ray diffraction and transmission electron microscopic investigations. Materials Science and Engineering: A. 2020;794. doi:10.1016/j.msea.2020.139597","apa":"Wu, H., Bill, T., Teng, Z. J., Pramanik, S., Hoyer, K.-P., Schaper, M., & Starke, P. (2020). Characterization of the fatigue behaviour for SAE 1045 steel without and with load-free sequences based on non-destructive, X-ray diffraction and transmission electron microscopic investigations. Materials Science and Engineering: A, 794, Article 139597. https://doi.org/10.1016/j.msea.2020.139597","chicago":"Wu, Haoran, T. Bill, Z.J. Teng, Sudipta Pramanik, Kay-Peter Hoyer, Mirko Schaper, and Peter Starke. “Characterization of the Fatigue Behaviour for SAE 1045 Steel without and with Load-Free Sequences Based on Non-Destructive, X-Ray Diffraction and Transmission Electron Microscopic Investigations.” Materials Science and Engineering: A 794 (2020). https://doi.org/10.1016/j.msea.2020.139597."},"year":"2020","title":"Characterization of the fatigue behaviour for SAE 1045 steel without and with load-free sequences based on non-destructive, X-ray diffraction and transmission electron microscopic investigations","publication_status":"published","publication_identifier":{"issn":["0921-5093"]},"department":[{"_id":"9"},{"_id":"158"}],"doi":"10.1016/j.msea.2020.139597","date_updated":"2023-06-01T14:29:23Z","language":[{"iso":"eng"}]},{"title":"Tribo-mechanical properties and adhesion behavior of DLC coatings sputtered onto 36NiCrMo16 produced by selective laser melting","department":[{"_id":"9"},{"_id":"158"}],"publication_identifier":{"issn":["0257-8972"]},"publication_status":"published","date_updated":"2023-06-01T14:29:36Z","doi":"10.1016/j.surfcoat.2020.125748","language":[{"iso":"eng"}],"user_id":"43720","publication":"Surface and Coatings Technology","keyword":["Materials Chemistry","Surfaces","Coatings and Films","Surfaces and Interfaces","Condensed Matter Physics","General Chemistry"],"publisher":"Elsevier BV","author":[{"full_name":"Tillmann, Wolfgang","first_name":"Wolfgang","last_name":"Tillmann"},{"last_name":"Lopes Dias","full_name":"Lopes Dias, Nelson Filipe","first_name":"Nelson Filipe"},{"first_name":"Dominic","full_name":"Stangier, Dominic","last_name":"Stangier"},{"full_name":"Hagen, Leif","first_name":"Leif","last_name":"Hagen"},{"first_name":"Mirko","full_name":"Schaper, Mirko","last_name":"Schaper","id":"43720"},{"last_name":"Hengsbach","first_name":"Florian","full_name":"Hengsbach, Florian"},{"full_name":"Hoyer, Kay-Peter","first_name":"Kay-Peter","id":"48411","last_name":"Hoyer"}],"quality_controlled":"1","date_created":"2023-02-02T14:43:02Z","status":"public","volume":394,"_id":"41521","intvolume":" 394","article_number":"125748","year":"2020","type":"journal_article","citation":{"apa":"Tillmann, W., Lopes Dias, N. F., Stangier, D., Hagen, L., Schaper, M., Hengsbach, F., & Hoyer, K.-P. (2020). Tribo-mechanical properties and adhesion behavior of DLC coatings sputtered onto 36NiCrMo16 produced by selective laser melting. Surface and Coatings Technology, 394, Article 125748. https://doi.org/10.1016/j.surfcoat.2020.125748","ama":"Tillmann W, Lopes Dias NF, Stangier D, et al. Tribo-mechanical properties and adhesion behavior of DLC coatings sputtered onto 36NiCrMo16 produced by selective laser melting. Surface and Coatings Technology. 2020;394. doi:10.1016/j.surfcoat.2020.125748","chicago":"Tillmann, Wolfgang, Nelson Filipe Lopes Dias, Dominic Stangier, Leif Hagen, Mirko Schaper, Florian Hengsbach, and Kay-Peter Hoyer. “Tribo-Mechanical Properties and Adhesion Behavior of DLC Coatings Sputtered onto 36NiCrMo16 Produced by Selective Laser Melting.” Surface and Coatings Technology 394 (2020). https://doi.org/10.1016/j.surfcoat.2020.125748.","mla":"Tillmann, Wolfgang, et al. “Tribo-Mechanical Properties and Adhesion Behavior of DLC Coatings Sputtered onto 36NiCrMo16 Produced by Selective Laser Melting.” Surface and Coatings Technology, vol. 394, 125748, Elsevier BV, 2020, doi:10.1016/j.surfcoat.2020.125748.","bibtex":"@article{Tillmann_Lopes Dias_Stangier_Hagen_Schaper_Hengsbach_Hoyer_2020, title={Tribo-mechanical properties and adhesion behavior of DLC coatings sputtered onto 36NiCrMo16 produced by selective laser melting}, volume={394}, DOI={10.1016/j.surfcoat.2020.125748}, number={125748}, journal={Surface and Coatings Technology}, publisher={Elsevier BV}, author={Tillmann, Wolfgang and Lopes Dias, Nelson Filipe and Stangier, Dominic and Hagen, Leif and Schaper, Mirko and Hengsbach, Florian and Hoyer, Kay-Peter}, year={2020} }","short":"W. Tillmann, N.F. Lopes Dias, D. Stangier, L. Hagen, M. Schaper, F. Hengsbach, K.-P. Hoyer, Surface and Coatings Technology 394 (2020).","ieee":"W. Tillmann et al., “Tribo-mechanical properties and adhesion behavior of DLC coatings sputtered onto 36NiCrMo16 produced by selective laser melting,” Surface and Coatings Technology, vol. 394, Art. no. 125748, 2020, doi: 10.1016/j.surfcoat.2020.125748."}},{"status":"public","date_created":"2023-02-02T14:43:22Z","volume":51,"quality_controlled":"1","publisher":"Wiley","author":[{"first_name":"Anatolii","full_name":"Andreiev, Anatolii","last_name":"Andreiev","id":"50215"},{"full_name":"Hoyer, Kay-Peter","first_name":"Kay-Peter","id":"48411","last_name":"Hoyer"},{"first_name":"Olexandr","full_name":"Grydin, Olexandr","last_name":"Grydin","id":"43822"},{"first_name":"Yaroslav","full_name":"Frolov, Yaroslav","last_name":"Frolov"},{"first_name":"Mirko","full_name":"Schaper, Mirko","last_name":"Schaper","id":"43720"}],"publication":"Materialwissenschaft und Werkstofftechnik","keyword":["Mechanical Engineering","Mechanics of Materials","Condensed Matter Physics","General Materials Science"],"user_id":"43720","citation":{"mla":"Andreiev, Anatolii, et al. “Degradable Silver‐based Alloys.” Materialwissenschaft Und Werkstofftechnik, vol. 51, no. 4, Wiley, 2020, pp. 517–30, doi:10.1002/mawe.201900191.","bibtex":"@article{Andreiev_Hoyer_Grydin_Frolov_Schaper_2020, title={Degradable silver‐based alloys}, volume={51}, DOI={10.1002/mawe.201900191}, number={4}, journal={Materialwissenschaft und Werkstofftechnik}, publisher={Wiley}, author={Andreiev, Anatolii and Hoyer, Kay-Peter and Grydin, Olexandr and Frolov, Yaroslav and Schaper, Mirko}, year={2020}, pages={517–530} }","ama":"Andreiev A, Hoyer K-P, Grydin O, Frolov Y, Schaper M. Degradable silver‐based alloys. Materialwissenschaft und Werkstofftechnik. 2020;51(4):517-530. doi:10.1002/mawe.201900191","apa":"Andreiev, A., Hoyer, K.-P., Grydin, O., Frolov, Y., & Schaper, M. (2020). Degradable silver‐based alloys. Materialwissenschaft Und Werkstofftechnik, 51(4), 517–530. https://doi.org/10.1002/mawe.201900191","chicago":"Andreiev, Anatolii, Kay-Peter Hoyer, Olexandr Grydin, Yaroslav Frolov, and Mirko Schaper. “Degradable Silver‐based Alloys.” Materialwissenschaft Und Werkstofftechnik 51, no. 4 (2020): 517–30. https://doi.org/10.1002/mawe.201900191.","ieee":"A. Andreiev, K.-P. Hoyer, O. Grydin, Y. Frolov, and M. Schaper, “Degradable silver‐based alloys,” Materialwissenschaft und Werkstofftechnik, vol. 51, no. 4, pp. 517–530, 2020, doi: 10.1002/mawe.201900191.","short":"A. Andreiev, K.-P. Hoyer, O. Grydin, Y. Frolov, M. Schaper, Materialwissenschaft Und Werkstofftechnik 51 (2020) 517–530."},"type":"journal_article","year":"2020","page":"517-530","issue":"4","intvolume":" 51","_id":"41522","publication_status":"published","publication_identifier":{"issn":["0933-5137","1521-4052"]},"department":[{"_id":"9"},{"_id":"158"}],"title":"Degradable silver‐based alloys","language":[{"iso":"eng"}],"doi":"10.1002/mawe.201900191","date_updated":"2023-06-01T14:29:46Z"},{"language":[{"iso":"eng"}],"date_updated":"2023-06-01T14:30:26Z","doi":"10.1080/15376494.2018.1520941","department":[{"_id":"158"}],"publication_status":"published","publication_identifier":{"issn":["1537-6494","1537-6532"]},"title":"The mechanical properties of rolled wire-reinforced aluminum composites at different strain values","page":"1599-1608","type":"journal_article","citation":{"chicago":"Stolbchenko, Mykhailo, Yaroslav Frolov, Hanna Makeieva, Olexandr Grydin, Michael A. Tershakovec, and Mirko Schaper. “The Mechanical Properties of Rolled Wire-Reinforced Aluminum Composites at Different Strain Values.” Mechanics of Advanced Materials and Structures 27, no. 18 (2020): 1599–1608. https://doi.org/10.1080/15376494.2018.1520941.","apa":"Stolbchenko, M., Frolov, Y., Makeieva, H., Grydin, O., Tershakovec, M. A., & Schaper, M. (2020). The mechanical properties of rolled wire-reinforced aluminum composites at different strain values. Mechanics of Advanced Materials and Structures, 27(18), 1599–1608. https://doi.org/10.1080/15376494.2018.1520941","ama":"Stolbchenko M, Frolov Y, Makeieva H, Grydin O, Tershakovec MA, Schaper M. The mechanical properties of rolled wire-reinforced aluminum composites at different strain values. Mechanics of Advanced Materials and Structures. 2020;27(18):1599-1608. doi:10.1080/15376494.2018.1520941","bibtex":"@article{Stolbchenko_Frolov_Makeieva_Grydin_Tershakovec_Schaper_2020, title={The mechanical properties of rolled wire-reinforced aluminum composites at different strain values}, volume={27}, DOI={10.1080/15376494.2018.1520941}, number={18}, journal={Mechanics of Advanced Materials and Structures}, author={Stolbchenko, Mykhailo and Frolov, Yaroslav and Makeieva, Hanna and Grydin, Olexandr and Tershakovec, Michael A. and Schaper, Mirko}, year={2020}, pages={1599–1608} }","mla":"Stolbchenko, Mykhailo, et al. “The Mechanical Properties of Rolled Wire-Reinforced Aluminum Composites at Different Strain Values.” Mechanics of Advanced Materials and Structures, vol. 27, no. 18, 2020, pp. 1599–608, doi:10.1080/15376494.2018.1520941.","short":"M. Stolbchenko, Y. Frolov, H. Makeieva, O. Grydin, M.A. Tershakovec, M. Schaper, Mechanics of Advanced Materials and Structures 27 (2020) 1599–1608.","ieee":"M. Stolbchenko, Y. Frolov, H. Makeieva, O. Grydin, M. A. Tershakovec, and M. Schaper, “The mechanical properties of rolled wire-reinforced aluminum composites at different strain values,” Mechanics of Advanced Materials and Structures, vol. 27, no. 18, pp. 1599–1608, 2020, doi: 10.1080/15376494.2018.1520941."},"year":"2020","_id":"24571","intvolume":" 27","issue":"18","publication":"Mechanics of Advanced Materials and Structures","author":[{"first_name":"Mykhailo","full_name":"Stolbchenko, Mykhailo","last_name":"Stolbchenko"},{"first_name":"Yaroslav","full_name":"Frolov, Yaroslav","last_name":"Frolov"},{"first_name":"Hanna","full_name":"Makeieva, Hanna","last_name":"Makeieva"},{"full_name":"Grydin, Olexandr","first_name":"Olexandr","id":"43822","last_name":"Grydin"},{"full_name":"Tershakovec, Michael A.","first_name":"Michael A.","last_name":"Tershakovec"},{"full_name":"Schaper, Mirko","first_name":"Mirko","id":"43720","last_name":"Schaper"}],"quality_controlled":"1","volume":27,"date_created":"2021-09-16T16:22:31Z","status":"public","user_id":"43720"},{"title":"Effect of substrate pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt coated additive manufactured 316 L substrates","user_id":"43720","author":[{"full_name":"Tillmann, Wolfgang","first_name":"Wolfgang","last_name":"Tillmann"},{"full_name":"Hagen, Leif","first_name":"Leif","last_name":"Hagen"},{"last_name":"Garthe","id":"11199","first_name":"Kai-Uwe","orcid":"0000-0003-0741-3812","full_name":"Garthe, Kai-Uwe"},{"first_name":"Kay-Peter","full_name":"Hoyer, Kay-Peter","last_name":"Hoyer","id":"48411"},{"id":"43720","last_name":"Schaper","full_name":"Schaper, Mirko","first_name":"Mirko"}],"quality_controlled":"1","department":[{"_id":"158"}],"publication":"Materialwissenschaft und Werkstofftechnik","publication_identifier":{"issn":["0933-5137","1521-4052"]},"publication_status":"published","status":"public","date_created":"2021-09-13T09:14:34Z","date_updated":"2023-06-01T14:31:06Z","_id":"24254","doi":"10.1002/mawe.202000109","type":"journal_article","citation":{"chicago":"Tillmann, Wolfgang, Leif Hagen, Kai-Uwe Garthe, Kay-Peter Hoyer, and Mirko Schaper. “Effect of Substrate Pre‐treatment on the Low Cycle Fatigue Performance of Tungsten Carbide‐cobalt Coated Additive Manufactured 316 L Substrates.” Materialwissenschaft Und Werkstofftechnik, 2020, 1452–64. https://doi.org/10.1002/mawe.202000109.","short":"W. Tillmann, L. Hagen, K.-U. Garthe, K.-P. Hoyer, M. Schaper, Materialwissenschaft Und Werkstofftechnik (2020) 1452–1464.","apa":"Tillmann, W., Hagen, L., Garthe, K.-U., Hoyer, K.-P., & Schaper, M. (2020). Effect of substrate pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt coated additive manufactured 316 L substrates. Materialwissenschaft Und Werkstofftechnik, 1452–1464. https://doi.org/10.1002/mawe.202000109","ama":"Tillmann W, Hagen L, Garthe K-U, Hoyer K-P, Schaper M. Effect of substrate pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt coated additive manufactured 316 L substrates. Materialwissenschaft und Werkstofftechnik. Published online 2020:1452-1464. doi:10.1002/mawe.202000109","bibtex":"@article{Tillmann_Hagen_Garthe_Hoyer_Schaper_2020, title={Effect of substrate pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt coated additive manufactured 316 L substrates}, DOI={10.1002/mawe.202000109}, journal={Materialwissenschaft und Werkstofftechnik}, author={Tillmann, Wolfgang and Hagen, Leif and Garthe, Kai-Uwe and Hoyer, Kay-Peter and Schaper, Mirko}, year={2020}, pages={1452–1464} }","mla":"Tillmann, Wolfgang, et al. “Effect of Substrate Pre‐treatment on the Low Cycle Fatigue Performance of Tungsten Carbide‐cobalt Coated Additive Manufactured 316 L Substrates.” Materialwissenschaft Und Werkstofftechnik, 2020, pp. 1452–64, doi:10.1002/mawe.202000109.","ieee":"W. Tillmann, L. Hagen, K.-U. Garthe, K.-P. Hoyer, and M. Schaper, “Effect of substrate pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt coated additive manufactured 316 L substrates,” Materialwissenschaft und Werkstofftechnik, pp. 1452–1464, 2020, doi: 10.1002/mawe.202000109."},"year":"2020","page":"1452-1464","language":[{"iso":"eng"}]},{"language":[{"iso":"eng"}],"type":"journal_article","citation":{"bibtex":"@article{Tillmann_Hagen_Schaak_Liß_Schaper_Hoyer_Aydinöz_Garthe_2020, title={Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM}, DOI={10.1007/s11666-020-01081-y}, journal={Journal of Thermal Spray Technology}, author={Tillmann, Wolfgang and Hagen, Leif and Schaak, Christopher and Liß, Jan and Schaper, Mirko and Hoyer, Kay-Peter and Aydinöz, Mehmet Esat and Garthe, Kai-Uwe}, year={2020}, pages={1396–1409} }","mla":"Tillmann, Wolfgang, et al. “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM.” Journal of Thermal Spray Technology, 2020, pp. 1396–409, doi:10.1007/s11666-020-01081-y.","chicago":"Tillmann, Wolfgang, Leif Hagen, Christopher Schaak, Jan Liß, Mirko Schaper, Kay-Peter Hoyer, Mehmet Esat Aydinöz, and Kai-Uwe Garthe. “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM.” Journal of Thermal Spray Technology, 2020, 1396–1409. https://doi.org/10.1007/s11666-020-01081-y.","apa":"Tillmann, W., Hagen, L., Schaak, C., Liß, J., Schaper, M., Hoyer, K.-P., Aydinöz, M. E., & Garthe, K.-U. (2020). Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM. Journal of Thermal Spray Technology, 1396–1409. https://doi.org/10.1007/s11666-020-01081-y","ama":"Tillmann W, Hagen L, Schaak C, et al. Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM. Journal of Thermal Spray Technology. Published online 2020:1396-1409. doi:10.1007/s11666-020-01081-y","ieee":"W. Tillmann et al., “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM,” Journal of Thermal Spray Technology, pp. 1396–1409, 2020, doi: 10.1007/s11666-020-01081-y.","short":"W. Tillmann, L. Hagen, C. Schaak, J. Liß, M. Schaper, K.-P. Hoyer, M.E. Aydinöz, K.-U. Garthe, Journal of Thermal Spray Technology (2020) 1396–1409."},"year":"2020","page":"1396-1409","_id":"24092","date_updated":"2023-06-01T14:31:48Z","doi":"10.1007/s11666-020-01081-y","quality_controlled":"1","author":[{"first_name":"Wolfgang","full_name":"Tillmann, Wolfgang","last_name":"Tillmann"},{"full_name":"Hagen, Leif","first_name":"Leif","last_name":"Hagen"},{"last_name":"Schaak","full_name":"Schaak, Christopher","first_name":"Christopher"},{"full_name":"Liß, Jan","first_name":"Jan","last_name":"Liß"},{"id":"43720","last_name":"Schaper","full_name":"Schaper, Mirko","first_name":"Mirko"},{"last_name":"Hoyer","id":"48411","first_name":"Kay-Peter","full_name":"Hoyer, Kay-Peter"},{"first_name":"Mehmet Esat","full_name":"Aydinöz, Mehmet Esat","last_name":"Aydinöz"},{"first_name":"Kai-Uwe","orcid":"0000-0003-0741-3812","full_name":"Garthe, Kai-Uwe","last_name":"Garthe","id":"11199"}],"department":[{"_id":"158"}],"publication":"Journal of Thermal Spray Technology","status":"public","date_created":"2021-09-09T15:52:15Z","publication_identifier":{"issn":["1059-9630","1544-1016"]},"publication_status":"published","abstract":[{"text":"AbstractDifferent studies have been demonstrated that the surface integrity of substrate bulk materials to be coated has a significant impact on the adhesion of thermally sprayed coatings. It is known that the surface integrity of parts processed by selective laser melting (SLM) differs from those obtained from bulk materials. Although 316L stainless steel is among the most investigated material for SLM, the adhesion of thermally sprayed coatings on 316L stainless steel substrates processed by SLM has not been studied yet. This study aims at evaluating the effect of various mechanical pre-treatments onto 316L stainless steel substrates processed by SLM and their effect on the adhesion of high velocity oxy-fuel (HVOF)-sprayed WC-Co coatings. To differentiate between topographical effects and residual stress-related phenomena, a stress-relief heat treatment of the SLM substrates served as a reference throughout the investigations. The differently pre-treated SLM substrates were investigated with regard to the surface roughness and residual stresses. For the HVOF-sprayed SLM composites, Vickers interfacial indentation tests were conducted to assess the resulting coating adhesion. The findings demonstrated that the HVOF-sprayed WC-Co coatings predominantly exhibit good adhesion to the SLM 316L substrates. However, it was found that the stress state in the SLM 316L substrate surface is more likely to affect the adhesion of the WC-Co coating, while the substrate surface roughness showed a marginal effect.","lang":"eng"}],"user_id":"43720","title":"Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM"},{"citation":{"bibtex":"@article{Tillmann_Hagen_Schaak_Liß_Schaper_Hoyer_Aydinöz_Garthe_2020, title={Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM}, DOI={10.1007/s11666-020-01081-y}, journal={Journal of Thermal Spray Technology}, author={Tillmann, W. and Hagen, L. and Schaak, C. and Liß, J. and Schaper, Mirko and Hoyer, Kay-Peter and Aydinöz, M. E. and Garthe, Kai-Uwe}, year={2020}, pages={1396–1409} }","mla":"Tillmann, W., et al. “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM.” Journal of Thermal Spray Technology, 2020, pp. 1396–409, doi:10.1007/s11666-020-01081-y.","chicago":"Tillmann, W., L. Hagen, C. Schaak, J. Liß, Mirko Schaper, Kay-Peter Hoyer, M. E. Aydinöz, and Kai-Uwe Garthe. “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM.” Journal of Thermal Spray Technology, 2020, 1396–1409. https://doi.org/10.1007/s11666-020-01081-y.","ama":"Tillmann W, Hagen L, Schaak C, et al. Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM. Journal of Thermal Spray Technology. Published online 2020:1396-1409. doi:10.1007/s11666-020-01081-y","apa":"Tillmann, W., Hagen, L., Schaak, C., Liß, J., Schaper, M., Hoyer, K.-P., Aydinöz, M. E., & Garthe, K.-U. (2020). Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM. Journal of Thermal Spray Technology, 1396–1409. https://doi.org/10.1007/s11666-020-01081-y","ieee":"W. Tillmann et al., “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM,” Journal of Thermal Spray Technology, pp. 1396–1409, 2020, doi: 10.1007/s11666-020-01081-y.","short":"W. Tillmann, L. Hagen, C. Schaak, J. Liß, M. Schaper, K.-P. Hoyer, M.E. Aydinöz, K.-U. Garthe, Journal of Thermal Spray Technology (2020) 1396–1409."},"year":"2020","type":"journal_article","page":"1396-1409","language":[{"iso":"eng"}],"_id":"24255","date_updated":"2023-06-01T14:31:19Z","doi":"10.1007/s11666-020-01081-y","quality_controlled":"1","author":[{"last_name":"Tillmann","full_name":"Tillmann, W.","first_name":"W."},{"last_name":"Hagen","full_name":"Hagen, L.","first_name":"L."},{"full_name":"Schaak, C.","first_name":"C.","last_name":"Schaak"},{"last_name":"Liß","first_name":"J.","full_name":"Liß, J."},{"full_name":"Schaper, Mirko","first_name":"Mirko","id":"43720","last_name":"Schaper"},{"last_name":"Hoyer","id":"48411","first_name":"Kay-Peter","full_name":"Hoyer, Kay-Peter"},{"first_name":"M. E.","full_name":"Aydinöz, M. E.","last_name":"Aydinöz"},{"id":"11199","last_name":"Garthe","orcid":"0000-0003-0741-3812","full_name":"Garthe, Kai-Uwe","first_name":"Kai-Uwe"}],"department":[{"_id":"158"}],"publication":"Journal of Thermal Spray Technology","publication_identifier":{"issn":["1059-9630","1544-1016"]},"publication_status":"published","status":"public","date_created":"2021-09-13T09:15:27Z","abstract":[{"text":"AbstractDifferent studies have been demonstrated that the surface integrity of substrate bulk materials to be coated has a significant impact on the adhesion of thermally sprayed coatings. It is known that the surface integrity of parts processed by selective laser melting (SLM) differs from those obtained from bulk materials. Although 316L stainless steel is among the most investigated material for SLM, the adhesion of thermally sprayed coatings on 316L stainless steel substrates processed by SLM has not been studied yet. This study aims at evaluating the effect of various mechanical pre-treatments onto 316L stainless steel substrates processed by SLM and their effect on the adhesion of high velocity oxy-fuel (HVOF)-sprayed WC-Co coatings. To differentiate between topographical effects and residual stress-related phenomena, a stress-relief heat treatment of the SLM substrates served as a reference throughout the investigations. The differently pre-treated SLM substrates were investigated with regard to the surface roughness and residual stresses. For the HVOF-sprayed SLM composites, Vickers interfacial indentation tests were conducted to assess the resulting coating adhesion. The findings demonstrated that the HVOF-sprayed WC-Co coatings predominantly exhibit good adhesion to the SLM 316L substrates. However, it was found that the stress state in the SLM 316L substrate surface is more likely to affect the adhesion of the WC-Co coating, while the substrate surface roughness showed a marginal effect.","lang":"eng"}],"title":"Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM","user_id":"43720"}]