--- _id: '60059' author: - first_name: Vojin Sasa full_name: Vukadinovic, Vojin Sasa id: '107131' last_name: Vukadinovic - first_name: Jane Clare full_name: Jones, Jane Clare last_name: Jones citation: ama: Vukadinovic VS, Jones JC. “Metaphysisch gesprochen ist Transideologie einem mittelalterlichen christlichen Kult nicht unähnlich”. Über Transaktivismus in Großbritannien und die Genese des genderkritischen Feminismus, über Joanne K. Rowling – und über Prince als Kritiker Jacques Lacans. Vojin Saša Vukadinović im Gespräch mit der britischen Feministin Jane Clare Jones. Vol 2021. Wallstein; 2021:151-180. apa: Vukadinovic, V. S., & Jones, J. C. (2021). “Metaphysisch gesprochen ist Transideologie einem mittelalterlichen christlichen Kult nicht unähnlich”. Über Transaktivismus in Großbritannien und die Genese des genderkritischen Feminismus, über Joanne K. Rowling – und über Prince als Kritiker Jacques Lacans. Vojin Saša Vukadinović im Gespräch mit der britischen Feministin Jane Clare Jones (Vol. 2021, pp. 151–180). Wallstein. bibtex: '@book{Vukadinovic_Jones_2021, place={Göttingen}, series={Jahrbuch Sexualitäten}, title={“Metaphysisch gesprochen ist Transideologie einem mittelalterlichen christlichen Kult nicht unähnlich”. Über Transaktivismus in Großbritannien und die Genese des genderkritischen Feminismus, über Joanne K. Rowling – und über Prince als Kritiker Jacques Lacans. Vojin Saša Vukadinović im Gespräch mit der britischen Feministin Jane Clare Jones}, volume={2021}, publisher={Wallstein}, author={Vukadinovic, Vojin Sasa and Jones, Jane Clare}, year={2021}, pages={151–180}, collection={Jahrbuch Sexualitäten} }' chicago: 'Vukadinovic, Vojin Sasa, and Jane Clare Jones. “Metaphysisch gesprochen ist Transideologie einem mittelalterlichen christlichen Kult nicht unähnlich”. Über Transaktivismus in Großbritannien und die Genese des genderkritischen Feminismus, über Joanne K. Rowling – und über Prince als Kritiker Jacques Lacans. Vojin Saša Vukadinović im Gespräch mit der britischen Feministin Jane Clare Jones. Vol. 2021. Jahrbuch Sexualitäten. Göttingen: Wallstein, 2021.' ieee: 'V. S. Vukadinovic and J. C. Jones, “Metaphysisch gesprochen ist Transideologie einem mittelalterlichen christlichen Kult nicht unähnlich”. Über Transaktivismus in Großbritannien und die Genese des genderkritischen Feminismus, über Joanne K. Rowling – und über Prince als Kritiker Jacques Lacans. Vojin Saša Vukadinović im Gespräch mit der britischen Feministin Jane Clare Jones, vol. 2021. Göttingen: Wallstein, 2021, pp. 151–180.' mla: Vukadinovic, Vojin Sasa, and Jane Clare Jones. “Metaphysisch gesprochen ist Transideologie einem mittelalterlichen christlichen Kult nicht unähnlich”. Über Transaktivismus in Großbritannien und die Genese des genderkritischen Feminismus, über Joanne K. Rowling – und über Prince als Kritiker Jacques Lacans. Vojin Saša Vukadinović im Gespräch mit der britischen Feministin Jane Clare Jones. Wallstein, 2021, pp. 151–80. short: V.S. Vukadinovic, J.C. Jones, “Metaphysisch gesprochen ist Transideologie einem mittelalterlichen christlichen Kult nicht unähnlich”. Über Transaktivismus in Großbritannien und die Genese des genderkritischen Feminismus, über Joanne K. Rowling – und über Prince als Kritiker Jacques Lacans. Vojin Saša Vukadinović im Gespräch mit der britischen Feministin Jane Clare Jones, Wallstein, Göttingen, 2021. date_created: 2025-05-28T20:56:01Z date_updated: 2025-05-30T08:46:59Z extern: '1' intvolume: ' 2021' language: - iso: ger page: 151-180 place: Göttingen publication_identifier: isbn: - 978-3-8353-3973-9 publication_status: published publisher: Wallstein series_title: Jahrbuch Sexualitäten status: public supervisor: - first_name: Jane Clare full_name: Jones, Jane Clare last_name: Jones title: '"Metaphysisch gesprochen ist Transideologie einem mittelalterlichen christlichen Kult nicht unähnlich". Über Transaktivismus in Großbritannien und die Genese des genderkritischen Feminismus, über Joanne K. Rowling – und über Prince als Kritiker Jacques Lacans. Vojin Saša Vukadinović im Gespräch mit der britischen Feministin Jane Clare Jones' type: misc user_id: '107131' volume: 2021 year: '2021' ... --- _id: '59040' citation: ama: Garske V, ed. Mein Religionsunterricht in Einer Pluralen Gesellschaft. Zum Verhältnis von Kirche Und Staat . Westermann; 2021. apa: Garske, V. (Ed.). (2021). Mein Religionsunterricht in einer pluralen Gesellschaft. Zum Verhältnis von Kirche und Staat . Westermann. bibtex: '@book{Garske_2021, place={Braunschweig}, title={Mein Religionsunterricht in einer pluralen Gesellschaft. Zum Verhältnis von Kirche und Staat }, publisher={Westermann}, year={2021} }' chicago: 'Garske, Volker, ed. Mein Religionsunterricht in Einer Pluralen Gesellschaft. Zum Verhältnis von Kirche Und Staat . Braunschweig: Westermann, 2021.' ieee: 'V. Garske, Ed., Mein Religionsunterricht in einer pluralen Gesellschaft. Zum Verhältnis von Kirche und Staat . Braunschweig: Westermann, 2021.' mla: Garske, Volker, editor. Mein Religionsunterricht in Einer Pluralen Gesellschaft. Zum Verhältnis von Kirche Und Staat . Westermann, 2021. short: V. Garske, ed., Mein Religionsunterricht in Einer Pluralen Gesellschaft. Zum Verhältnis von Kirche Und Staat , Westermann, Braunschweig, 2021. date_created: 2025-03-16T11:25:48Z date_updated: 2025-06-01T12:53:46Z editor: - first_name: Volker full_name: Garske, Volker id: '162' last_name: Garske language: - iso: eng place: Braunschweig publisher: Westermann status: public title: 'Mein Religionsunterricht in einer pluralen Gesellschaft. Zum Verhältnis von Kirche und Staat ' type: book_editor user_id: '162' year: '2021' ... --- _id: '60044' abstract: - lang: eng text: AbstractExercise is described to provoke enhancements of cardiorespiratory fitness in persons with Multiple Sclerosis (pwMS). However, a high inter-individual variability in training responses has been observed. This analysis investigates response heterogeneity in cardiorespiratory fitness following high intensity interval (HIIT) and moderate continuous training (MCT) and analyzes potential predictors of cardiorespiratory training effects in pwMS. 131 pwMS performed HIIT or MCT 3–5x/ week on a cycle ergometer for three weeks. Individual responses were classified. Finally, a multiple linear regression was conducted to examine potential associations between changes of absolute peak oxygen consumption (absolute ∆V̇O2peak/kg), training modality and participant’s characteristics. Results show a time and interaction effect for ∆V̇O2peak/kg. Absolute changes of cardiorespiratory responses were larger and the non-response proportions smaller in HIIT vs. MCT. The model accounting for 8.6% of the variance of ∆V̇O2peak/kg suggests that HIIT, younger age and lower baseline fitness predict a higher absolute ∆V̇O2peak/kg following an exercise intervention. Thus, this work implements a novel approach that investigates potential determinants of cardiorespiratory response heterogeneity within a clinical setting and analyzes a remarkable bigger sample. Further predictors need to be identified to increase the knowledge about response heterogeneity, thereby supporting the development of individualized training recommendations for pwMS. author: - first_name: Marit Lea full_name: Schlagheck, Marit Lea id: '117661' last_name: Schlagheck orcid: '0000-0002-8913-6080 ' - first_name: Anika full_name: Wucherer, Anika last_name: Wucherer - first_name: Annette full_name: Rademacher, Annette last_name: Rademacher - first_name: Niklas full_name: Joisten, Niklas last_name: Joisten - first_name: Sebastian full_name: Proschinger, Sebastian last_name: Proschinger - first_name: David full_name: Walzik, David last_name: Walzik - first_name: Wilhelm full_name: Bloch, Wilhelm last_name: Bloch - first_name: Jan full_name: Kool, Jan last_name: Kool - first_name: Roman full_name: Gonzenbach, Roman last_name: Gonzenbach - first_name: Jens full_name: Bansi, Jens last_name: Bansi - first_name: Philipp full_name: Zimmer, Philipp last_name: Zimmer citation: ama: 'Schlagheck ML, Wucherer A, Rademacher A, et al. VO2peak Response Heterogeneity in Persons with Multiple Sclerosis: To HIIT or Not to HIIT? International Journal of Sports Medicine. 2021;42(14):1319-1328. doi:10.1055/a-1481-8639' apa: 'Schlagheck, M. L., Wucherer, A., Rademacher, A., Joisten, N., Proschinger, S., Walzik, D., Bloch, W., Kool, J., Gonzenbach, R., Bansi, J., & Zimmer, P. (2021). VO2peak Response Heterogeneity in Persons with Multiple Sclerosis: To HIIT or Not to HIIT? International Journal of Sports Medicine, 42(14), 1319–1328. https://doi.org/10.1055/a-1481-8639' bibtex: '@article{Schlagheck_Wucherer_Rademacher_Joisten_Proschinger_Walzik_Bloch_Kool_Gonzenbach_Bansi_et al._2021, title={VO2peak Response Heterogeneity in Persons with Multiple Sclerosis: To HIIT or Not to HIIT?}, volume={42}, DOI={10.1055/a-1481-8639}, number={14}, journal={International Journal of Sports Medicine}, publisher={Georg Thieme Verlag KG}, author={Schlagheck, Marit Lea and Wucherer, Anika and Rademacher, Annette and Joisten, Niklas and Proschinger, Sebastian and Walzik, David and Bloch, Wilhelm and Kool, Jan and Gonzenbach, Roman and Bansi, Jens and et al.}, year={2021}, pages={1319–1328} }' chicago: 'Schlagheck, Marit Lea, Anika Wucherer, Annette Rademacher, Niklas Joisten, Sebastian Proschinger, David Walzik, Wilhelm Bloch, et al. “VO2peak Response Heterogeneity in Persons with Multiple Sclerosis: To HIIT or Not to HIIT?” International Journal of Sports Medicine 42, no. 14 (2021): 1319–28. https://doi.org/10.1055/a-1481-8639.' ieee: 'M. L. Schlagheck et al., “VO2peak Response Heterogeneity in Persons with Multiple Sclerosis: To HIIT or Not to HIIT?,” International Journal of Sports Medicine, vol. 42, no. 14, pp. 1319–1328, 2021, doi: 10.1055/a-1481-8639.' mla: 'Schlagheck, Marit Lea, et al. “VO2peak Response Heterogeneity in Persons with Multiple Sclerosis: To HIIT or Not to HIIT?” International Journal of Sports Medicine, vol. 42, no. 14, Georg Thieme Verlag KG, 2021, pp. 1319–28, doi:10.1055/a-1481-8639.' short: M.L. Schlagheck, A. Wucherer, A. Rademacher, N. Joisten, S. Proschinger, D. Walzik, W. Bloch, J. Kool, R. Gonzenbach, J. Bansi, P. Zimmer, International Journal of Sports Medicine 42 (2021) 1319–1328. date_created: 2025-05-27T07:54:18Z date_updated: 2025-06-02T09:33:48Z doi: 10.1055/a-1481-8639 extern: '1' intvolume: ' 42' issue: '14' language: - iso: eng page: 1319-1328 publication: International Journal of Sports Medicine publication_identifier: issn: - 0172-4622 - 1439-3964 publication_status: published publisher: Georg Thieme Verlag KG status: public title: 'VO2peak Response Heterogeneity in Persons with Multiple Sclerosis: To HIIT or Not to HIIT?' type: journal_article user_id: '117661' volume: 42 year: '2021' ... --- _id: '60043' article_number: '102905' author: - first_name: Annette full_name: Rademacher, Annette last_name: Rademacher - first_name: Niklas full_name: Joisten, Niklas last_name: Joisten - first_name: Sebastian full_name: Proschinger, Sebastian last_name: Proschinger - first_name: Jonas full_name: Hebchen, Jonas last_name: Hebchen - first_name: Marit Lea full_name: Schlagheck, Marit Lea id: '117661' last_name: Schlagheck orcid: '0000-0002-8913-6080 ' - first_name: Wilhelm full_name: Bloch, Wilhelm last_name: Bloch - first_name: Roman full_name: Gonzenbach, Roman last_name: Gonzenbach - first_name: Jan full_name: Kool, Jan last_name: Kool - first_name: Jens full_name: Bansi, Jens last_name: Bansi - first_name: Philipp full_name: Zimmer, Philipp last_name: Zimmer citation: ama: Rademacher A, Joisten N, Proschinger S, et al. Do baseline cognitive status, participant specific characteristics and EDSS impact changes of cognitive performance following aerobic exercise intervention in multiple sclerosis? Multiple Sclerosis and Related Disorders. 2021;51. doi:10.1016/j.msard.2021.102905 apa: Rademacher, A., Joisten, N., Proschinger, S., Hebchen, J., Schlagheck, M. L., Bloch, W., Gonzenbach, R., Kool, J., Bansi, J., & Zimmer, P. (2021). Do baseline cognitive status, participant specific characteristics and EDSS impact changes of cognitive performance following aerobic exercise intervention in multiple sclerosis? Multiple Sclerosis and Related Disorders, 51, Article 102905. https://doi.org/10.1016/j.msard.2021.102905 bibtex: '@article{Rademacher_Joisten_Proschinger_Hebchen_Schlagheck_Bloch_Gonzenbach_Kool_Bansi_Zimmer_2021, title={Do baseline cognitive status, participant specific characteristics and EDSS impact changes of cognitive performance following aerobic exercise intervention in multiple sclerosis?}, volume={51}, DOI={10.1016/j.msard.2021.102905}, number={102905}, journal={Multiple Sclerosis and Related Disorders}, publisher={Elsevier BV}, author={Rademacher, Annette and Joisten, Niklas and Proschinger, Sebastian and Hebchen, Jonas and Schlagheck, Marit Lea and Bloch, Wilhelm and Gonzenbach, Roman and Kool, Jan and Bansi, Jens and Zimmer, Philipp}, year={2021} }' chicago: Rademacher, Annette, Niklas Joisten, Sebastian Proschinger, Jonas Hebchen, Marit Lea Schlagheck, Wilhelm Bloch, Roman Gonzenbach, Jan Kool, Jens Bansi, and Philipp Zimmer. “Do Baseline Cognitive Status, Participant Specific Characteristics and EDSS Impact Changes of Cognitive Performance Following Aerobic Exercise Intervention in Multiple Sclerosis?” Multiple Sclerosis and Related Disorders 51 (2021). https://doi.org/10.1016/j.msard.2021.102905. ieee: 'A. Rademacher et al., “Do baseline cognitive status, participant specific characteristics and EDSS impact changes of cognitive performance following aerobic exercise intervention in multiple sclerosis?,” Multiple Sclerosis and Related Disorders, vol. 51, Art. no. 102905, 2021, doi: 10.1016/j.msard.2021.102905.' mla: Rademacher, Annette, et al. “Do Baseline Cognitive Status, Participant Specific Characteristics and EDSS Impact Changes of Cognitive Performance Following Aerobic Exercise Intervention in Multiple Sclerosis?” Multiple Sclerosis and Related Disorders, vol. 51, 102905, Elsevier BV, 2021, doi:10.1016/j.msard.2021.102905. short: A. Rademacher, N. Joisten, S. Proschinger, J. Hebchen, M.L. Schlagheck, W. Bloch, R. Gonzenbach, J. Kool, J. Bansi, P. Zimmer, Multiple Sclerosis and Related Disorders 51 (2021). date_created: 2025-05-27T07:54:02Z date_updated: 2025-06-02T09:34:33Z doi: 10.1016/j.msard.2021.102905 extern: '1' intvolume: ' 51' language: - iso: eng publication: Multiple Sclerosis and Related Disorders publication_identifier: issn: - 2211-0348 publication_status: published publisher: Elsevier BV status: public title: Do baseline cognitive status, participant specific characteristics and EDSS impact changes of cognitive performance following aerobic exercise intervention in multiple sclerosis? type: journal_article user_id: '117661' volume: 51 year: '2021' ... --- _id: '60045' author: - first_name: Marit Lea full_name: Schlagheck, Marit Lea id: '117661' last_name: Schlagheck orcid: '0000-0002-8913-6080 ' - first_name: Niklas full_name: Joisten, Niklas last_name: Joisten - first_name: David full_name: Walzik, David last_name: Walzik - first_name: Florian full_name: Wolf, Florian last_name: Wolf - first_name: Sarah E. full_name: Neil-Sztramko, Sarah E. last_name: Neil-Sztramko - first_name: Jens full_name: Bansi, Jens last_name: Bansi - first_name: Annette full_name: Rademacher, Annette last_name: Rademacher - first_name: Philipp full_name: Zimmer, Philipp last_name: Zimmer citation: ama: 'Schlagheck ML, Joisten N, Walzik D, et al. Systematic Review of Exercise Studies in Persons with Multiple Sclerosis: Exploring the Quality of Interventions According to the Principles of Exercise Training. Neurology and Therapy. 2021;10(2):585-607. doi:10.1007/s40120-021-00274-z' apa: 'Schlagheck, M. L., Joisten, N., Walzik, D., Wolf, F., Neil-Sztramko, S. E., Bansi, J., Rademacher, A., & Zimmer, P. (2021). Systematic Review of Exercise Studies in Persons with Multiple Sclerosis: Exploring the Quality of Interventions According to the Principles of Exercise Training. Neurology and Therapy, 10(2), 585–607. https://doi.org/10.1007/s40120-021-00274-z' bibtex: '@article{Schlagheck_Joisten_Walzik_Wolf_Neil-Sztramko_Bansi_Rademacher_Zimmer_2021, title={Systematic Review of Exercise Studies in Persons with Multiple Sclerosis: Exploring the Quality of Interventions According to the Principles of Exercise Training}, volume={10}, DOI={10.1007/s40120-021-00274-z}, number={2}, journal={Neurology and Therapy}, publisher={Springer Science and Business Media LLC}, author={Schlagheck, Marit Lea and Joisten, Niklas and Walzik, David and Wolf, Florian and Neil-Sztramko, Sarah E. and Bansi, Jens and Rademacher, Annette and Zimmer, Philipp}, year={2021}, pages={585–607} }' chicago: 'Schlagheck, Marit Lea, Niklas Joisten, David Walzik, Florian Wolf, Sarah E. Neil-Sztramko, Jens Bansi, Annette Rademacher, and Philipp Zimmer. “Systematic Review of Exercise Studies in Persons with Multiple Sclerosis: Exploring the Quality of Interventions According to the Principles of Exercise Training.” Neurology and Therapy 10, no. 2 (2021): 585–607. https://doi.org/10.1007/s40120-021-00274-z.' ieee: 'M. L. Schlagheck et al., “Systematic Review of Exercise Studies in Persons with Multiple Sclerosis: Exploring the Quality of Interventions According to the Principles of Exercise Training,” Neurology and Therapy, vol. 10, no. 2, pp. 585–607, 2021, doi: 10.1007/s40120-021-00274-z.' mla: 'Schlagheck, Marit Lea, et al. “Systematic Review of Exercise Studies in Persons with Multiple Sclerosis: Exploring the Quality of Interventions According to the Principles of Exercise Training.” Neurology and Therapy, vol. 10, no. 2, Springer Science and Business Media LLC, 2021, pp. 585–607, doi:10.1007/s40120-021-00274-z.' short: M.L. Schlagheck, N. Joisten, D. Walzik, F. Wolf, S.E. Neil-Sztramko, J. Bansi, A. Rademacher, P. Zimmer, Neurology and Therapy 10 (2021) 585–607. date_created: 2025-05-27T07:54:31Z date_updated: 2025-06-02T09:34:58Z doi: 10.1007/s40120-021-00274-z extern: '1' intvolume: ' 10' issue: '2' language: - iso: eng page: 585-607 publication: Neurology and Therapy publication_identifier: issn: - 2193-8253 - 2193-6536 publication_status: published publisher: Springer Science and Business Media LLC status: public title: 'Systematic Review of Exercise Studies in Persons with Multiple Sclerosis: Exploring the Quality of Interventions According to the Principles of Exercise Training' type: journal_article user_id: '117661' volume: 10 year: '2021' ... --- _id: '60090' article_number: '103476' author: - first_name: Florian full_name: Wolf, Florian last_name: Wolf - first_name: Annette full_name: Rademacher, Annette last_name: Rademacher - first_name: Niklas full_name: Joisten, Niklas last_name: Joisten - first_name: Sebastian full_name: Proschinger, Sebastian last_name: Proschinger - first_name: Marit Lea full_name: Schlagheck, Marit Lea id: '117661' last_name: Schlagheck orcid: '0000-0002-8913-6080 ' - first_name: Wilhelm full_name: Bloch, Wilhelm last_name: Bloch - first_name: Roman full_name: Gonzenbach, Roman last_name: Gonzenbach - first_name: Jan full_name: Kool, Jan last_name: Kool - first_name: Jens full_name: Bansi, Jens last_name: Bansi - first_name: Philipp full_name: Zimmer, Philipp last_name: Zimmer citation: ama: Wolf F, Rademacher A, Joisten N, et al. The aerobic capacity – fatigue relationship in persons with Multiple Sclerosis is not reproducible in a pooled analysis of two randomized controlled trials. Multiple Sclerosis and Related Disorders. 2021;58. doi:10.1016/j.msard.2021.103476 apa: Wolf, F., Rademacher, A., Joisten, N., Proschinger, S., Schlagheck, M. L., Bloch, W., Gonzenbach, R., Kool, J., Bansi, J., & Zimmer, P. (2021). The aerobic capacity – fatigue relationship in persons with Multiple Sclerosis is not reproducible in a pooled analysis of two randomized controlled trials. Multiple Sclerosis and Related Disorders, 58, Article 103476. https://doi.org/10.1016/j.msard.2021.103476 bibtex: '@article{Wolf_Rademacher_Joisten_Proschinger_Schlagheck_Bloch_Gonzenbach_Kool_Bansi_Zimmer_2021, title={The aerobic capacity – fatigue relationship in persons with Multiple Sclerosis is not reproducible in a pooled analysis of two randomized controlled trials}, volume={58}, DOI={10.1016/j.msard.2021.103476}, number={103476}, journal={Multiple Sclerosis and Related Disorders}, publisher={Elsevier BV}, author={Wolf, Florian and Rademacher, Annette and Joisten, Niklas and Proschinger, Sebastian and Schlagheck, Marit Lea and Bloch, Wilhelm and Gonzenbach, Roman and Kool, Jan and Bansi, Jens and Zimmer, Philipp}, year={2021} }' chicago: Wolf, Florian, Annette Rademacher, Niklas Joisten, Sebastian Proschinger, Marit Lea Schlagheck, Wilhelm Bloch, Roman Gonzenbach, Jan Kool, Jens Bansi, and Philipp Zimmer. “The Aerobic Capacity – Fatigue Relationship in Persons with Multiple Sclerosis Is Not Reproducible in a Pooled Analysis of Two Randomized Controlled Trials.” Multiple Sclerosis and Related Disorders 58 (2021). https://doi.org/10.1016/j.msard.2021.103476. ieee: 'F. Wolf et al., “The aerobic capacity – fatigue relationship in persons with Multiple Sclerosis is not reproducible in a pooled analysis of two randomized controlled trials,” Multiple Sclerosis and Related Disorders, vol. 58, Art. no. 103476, 2021, doi: 10.1016/j.msard.2021.103476.' mla: Wolf, Florian, et al. “The Aerobic Capacity – Fatigue Relationship in Persons with Multiple Sclerosis Is Not Reproducible in a Pooled Analysis of Two Randomized Controlled Trials.” Multiple Sclerosis and Related Disorders, vol. 58, 103476, Elsevier BV, 2021, doi:10.1016/j.msard.2021.103476. short: F. Wolf, A. Rademacher, N. Joisten, S. Proschinger, M.L. Schlagheck, W. Bloch, R. Gonzenbach, J. Kool, J. Bansi, P. Zimmer, Multiple Sclerosis and Related Disorders 58 (2021). date_created: 2025-06-02T09:41:32Z date_updated: 2025-06-02T09:45:25Z doi: 10.1016/j.msard.2021.103476 extern: '1' intvolume: ' 58' language: - iso: eng publication: Multiple Sclerosis and Related Disorders publication_identifier: issn: - 2211-0348 publication_status: published publisher: Elsevier BV status: public title: The aerobic capacity – fatigue relationship in persons with Multiple Sclerosis is not reproducible in a pooled analysis of two randomized controlled trials type: journal_article user_id: '117661' volume: 58 year: '2021' ... --- _id: '51202' abstract: - lang: eng text: When joining lightweight parts of various materials, clinching is a cost efficient solution. In a production line, the quality of a clinch point is primarily controlled by measurement of dimensions, which are accessible from outside. However, methods such as visual testing and measuring the bottom thickness as well as the outer diameter are not able to deliver any information about the most significant geometrical characteristic of the clinch point, neck thickness and undercut. Furthermore, ex-situ destructive methods such as microsectioning cannot detect elastic deformations and cracks that close after unloading. In order to exceed the current limits, a new non-destructive in-situ testing method for the clinching process is necessary. This work proposes a concept to characterize clinch points in-situ by combining two complementary non-destructive methods, namely, computed tomography (CT) and ultrasonic testing. Firstly, clinch points with different geometrical characteristics are analysed experimentally using ex-situ CT to get a highly spatially resolved 3D-image of the object. In this context, highly X-ray attenuating materials enhancing the visibility of the sheet-sheet interface are investigated. Secondly, the test specimens are modelled using finite element method (FEM) and a transient dynamic analysis (TDA) is conducted to study the effect of the geometrical differences on the deformation energy and to qualify the TDA as a fast in-situ non-destructive method for characterizing clinch points at high temporal resolution. author: - first_name: Daniel full_name: Köhler, Daniel last_name: Köhler - first_name: Behdad full_name: Sadeghian, Behdad last_name: Sadeghian - first_name: Robert full_name: Kupfer, Robert last_name: Kupfer - first_name: Juliane full_name: Troschitz, Juliane last_name: Troschitz - first_name: Maik full_name: Gude, Maik last_name: Gude - first_name: Alexander full_name: Brosius, Alexander last_name: Brosius citation: ama: Köhler D, Sadeghian B, Kupfer R, Troschitz J, Gude M, Brosius A. A Method for Characterization of Geometric Deviations in Clinch Points with Computed Tomography and Transient Dynamic Analysis. Key Engineering Materials. 2021;883:89-96. doi:10.4028/www.scientific.net/kem.883.89 apa: Köhler, D., Sadeghian, B., Kupfer, R., Troschitz, J., Gude, M., & Brosius, A. (2021). A Method for Characterization of Geometric Deviations in Clinch Points with Computed Tomography and Transient Dynamic Analysis. Key Engineering Materials, 883, 89–96. https://doi.org/10.4028/www.scientific.net/kem.883.89 bibtex: '@article{Köhler_Sadeghian_Kupfer_Troschitz_Gude_Brosius_2021, title={A Method for Characterization of Geometric Deviations in Clinch Points with Computed Tomography and Transient Dynamic Analysis}, volume={883}, DOI={10.4028/www.scientific.net/kem.883.89}, journal={Key Engineering Materials}, publisher={Trans Tech Publications, Ltd.}, author={Köhler, Daniel and Sadeghian, Behdad and Kupfer, Robert and Troschitz, Juliane and Gude, Maik and Brosius, Alexander}, year={2021}, pages={89–96} }' chicago: 'Köhler, Daniel, Behdad Sadeghian, Robert Kupfer, Juliane Troschitz, Maik Gude, and Alexander Brosius. “A Method for Characterization of Geometric Deviations in Clinch Points with Computed Tomography and Transient Dynamic Analysis.” Key Engineering Materials 883 (2021): 89–96. https://doi.org/10.4028/www.scientific.net/kem.883.89.' ieee: 'D. Köhler, B. Sadeghian, R. Kupfer, J. Troschitz, M. Gude, and A. Brosius, “A Method for Characterization of Geometric Deviations in Clinch Points with Computed Tomography and Transient Dynamic Analysis,” Key Engineering Materials, vol. 883, pp. 89–96, 2021, doi: 10.4028/www.scientific.net/kem.883.89.' mla: Köhler, Daniel, et al. “A Method for Characterization of Geometric Deviations in Clinch Points with Computed Tomography and Transient Dynamic Analysis.” Key Engineering Materials, vol. 883, Trans Tech Publications, Ltd., 2021, pp. 89–96, doi:10.4028/www.scientific.net/kem.883.89. short: D. Köhler, B. Sadeghian, R. Kupfer, J. Troschitz, M. Gude, A. Brosius, Key Engineering Materials 883 (2021) 89–96. date_created: 2024-02-06T15:06:14Z date_updated: 2025-06-02T20:19:57Z department: - _id: '157' - _id: '43' doi: 10.4028/www.scientific.net/kem.883.89 intvolume: ' 883' keyword: - Mechanical Engineering - Mechanics of Materials - General Materials Science language: - iso: eng page: 89-96 project: - _id: '130' grant_number: '418701707' name: 'TRR 285: TRR 285' - _id: '133' name: 'TRR 285 - C: TRR 285 - Project Area C' - _id: '148' name: 'TRR 285 – C04: TRR 285 - Subproject C04' publication: Key Engineering Materials publication_identifier: issn: - 1662-9795 publication_status: published publisher: Trans Tech Publications, Ltd. status: public title: A Method for Characterization of Geometric Deviations in Clinch Points with Computed Tomography and Transient Dynamic Analysis type: journal_article user_id: '83408' volume: 883 year: '2021' ... --- _id: '51199' abstract: - lang: eng text: AbstractRecent developments in automotive and aircraft industry towards a multi-material design pose challenges for modern joining technologies due to different mechanical properties and material compositions of various materials such as composites and metals. Therefore, mechanical joining technologies like clinching are in the focus of current research activities. For multi-material joints of metals and thermoplastic composites thermally assisted clinching processes with advanced tool concepts are well developed. The material-specific properties of fibre-reinforced thermoplastics have a significant influence on the joining process and the resulting material structure in the joining zone. For this reason, it is important to investigate these influences in detail and to understand the phenomena occurring during the joining process. Additionally, this provides the basis for a validation of a numerical simulation of such joining processes. In this paper, the material structure in a joint resulting from a thermally assisted clinching process is investigated. The joining partners are an aluminium sheet and a thermoplastic composite (organo sheet). Using computed tomography enables a three-dimensional investigation that allows a detailed analysis of the phenomena in different joining stages and in the material structure of the finished joint. Consequently, this study provides a more detailed understanding of the material behavior of thermoplastic composites during thermally assisted clinching. author: - first_name: Benjamin full_name: Gröger, Benjamin last_name: Gröger - first_name: Daniel full_name: Köhler, Daniel last_name: Köhler - first_name: Julian full_name: Vorderbrüggen, Julian last_name: Vorderbrüggen - first_name: Juliane full_name: Troschitz, Juliane last_name: Troschitz - first_name: Robert full_name: Kupfer, Robert last_name: Kupfer - first_name: Gerson full_name: Meschut, Gerson last_name: Meschut - first_name: Maik full_name: Gude, Maik last_name: Gude citation: ama: Gröger B, Köhler D, Vorderbrüggen J, et al. Computed tomography investigation of the material structure in clinch joints in aluminium fibre-reinforced thermoplastic sheets. Production Engineering. 2021;16(2-3):203-212. doi:10.1007/s11740-021-01091-x apa: Gröger, B., Köhler, D., Vorderbrüggen, J., Troschitz, J., Kupfer, R., Meschut, G., & Gude, M. (2021). Computed tomography investigation of the material structure in clinch joints in aluminium fibre-reinforced thermoplastic sheets. Production Engineering, 16(2–3), 203–212. https://doi.org/10.1007/s11740-021-01091-x bibtex: '@article{Gröger_Köhler_Vorderbrüggen_Troschitz_Kupfer_Meschut_Gude_2021, title={Computed tomography investigation of the material structure in clinch joints in aluminium fibre-reinforced thermoplastic sheets}, volume={16}, DOI={10.1007/s11740-021-01091-x}, number={2–3}, journal={Production Engineering}, publisher={Springer Science and Business Media LLC}, author={Gröger, Benjamin and Köhler, Daniel and Vorderbrüggen, Julian and Troschitz, Juliane and Kupfer, Robert and Meschut, Gerson and Gude, Maik}, year={2021}, pages={203–212} }' chicago: 'Gröger, Benjamin, Daniel Köhler, Julian Vorderbrüggen, Juliane Troschitz, Robert Kupfer, Gerson Meschut, and Maik Gude. “Computed Tomography Investigation of the Material Structure in Clinch Joints in Aluminium Fibre-Reinforced Thermoplastic Sheets.” Production Engineering 16, no. 2–3 (2021): 203–12. https://doi.org/10.1007/s11740-021-01091-x.' ieee: 'B. Gröger et al., “Computed tomography investigation of the material structure in clinch joints in aluminium fibre-reinforced thermoplastic sheets,” Production Engineering, vol. 16, no. 2–3, pp. 203–212, 2021, doi: 10.1007/s11740-021-01091-x.' mla: Gröger, Benjamin, et al. “Computed Tomography Investigation of the Material Structure in Clinch Joints in Aluminium Fibre-Reinforced Thermoplastic Sheets.” Production Engineering, vol. 16, no. 2–3, Springer Science and Business Media LLC, 2021, pp. 203–12, doi:10.1007/s11740-021-01091-x. short: B. Gröger, D. Köhler, J. Vorderbrüggen, J. Troschitz, R. Kupfer, G. Meschut, M. Gude, Production Engineering 16 (2021) 203–212. date_created: 2024-02-06T15:05:29Z date_updated: 2025-06-02T20:20:49Z department: - _id: '157' - _id: '43' doi: 10.1007/s11740-021-01091-x intvolume: ' 16' issue: 2-3 keyword: - Industrial and Manufacturing Engineering - Mechanical Engineering language: - iso: eng page: 203-212 project: - _id: '130' grant_number: '418701707' name: 'TRR 285: TRR 285' - _id: '133' name: 'TRR 285 - C: TRR 285 - Project Area C' - _id: '148' name: 'TRR 285 – C04: TRR 285 - Subproject C04' - _id: '131' name: 'TRR 285 - A: TRR 285 - Project Area A' - _id: '137' name: 'TRR 285 – A03: TRR 285 - Subproject A03' publication: Production Engineering publication_identifier: issn: - 0944-6524 - 1863-7353 publication_status: published publisher: Springer Science and Business Media LLC status: public title: Computed tomography investigation of the material structure in clinch joints in aluminium fibre-reinforced thermoplastic sheets type: journal_article user_id: '83408' volume: 16 year: '2021' ... --- _id: '51200' abstract: - lang: eng text: As lightweight design gains more and more attention, time and cost-efficient joining methods such as clinching are becoming more popular. A clinch point’s quality is usually determined by ex situ destructive analyses such as microsectioning. However, these methods do not yield the detection of phenomena occurring during loading such as elastic deformations and cracks that close after unloading. Alternatively, in situ computed tomography (in situ CT) can be used to investigate the loading process of clinch points. In this paper, a method for in situ CT analysis of a single-lap shear test with clinched metal sheets is presented at the example of a clinched joint with two 2 mm thick aluminum sheets. Furthermore, the potential of this method to validate numerical simulations is shown. Since the sheets’ surfaces are locally in contact with each other, the interface between both aluminum sheets and therefore the exact contour of the joining partners is difficult to identify in CT analyses. To compensate for this, the application of copper varnish between the sheets is investigated. The best in situ CT results are achieved with both sheets treated. It showed that with this treatment, in situ CT is suitable to properly observe the three-dimensional deformation behavior and to identify the failure modes. article_number: '1859' author: - first_name: Daniel full_name: Köhler, Daniel last_name: Köhler - first_name: Robert full_name: Kupfer, Robert last_name: Kupfer - first_name: Juliane full_name: Troschitz, Juliane last_name: Troschitz - first_name: Maik full_name: Gude, Maik last_name: Gude citation: ama: Köhler D, Kupfer R, Troschitz J, Gude M. In Situ Computed Tomography—Analysis of a Single-Lap Shear Test with Clinch Points. Materials. 2021;14(8). doi:10.3390/ma14081859 apa: Köhler, D., Kupfer, R., Troschitz, J., & Gude, M. (2021). In Situ Computed Tomography—Analysis of a Single-Lap Shear Test with Clinch Points. Materials, 14(8), Article 1859. https://doi.org/10.3390/ma14081859 bibtex: '@article{Köhler_Kupfer_Troschitz_Gude_2021, title={In Situ Computed Tomography—Analysis of a Single-Lap Shear Test with Clinch Points}, volume={14}, DOI={10.3390/ma14081859}, number={81859}, journal={Materials}, publisher={MDPI AG}, author={Köhler, Daniel and Kupfer, Robert and Troschitz, Juliane and Gude, Maik}, year={2021} }' chicago: Köhler, Daniel, Robert Kupfer, Juliane Troschitz, and Maik Gude. “In Situ Computed Tomography—Analysis of a Single-Lap Shear Test with Clinch Points.” Materials 14, no. 8 (2021). https://doi.org/10.3390/ma14081859. ieee: 'D. Köhler, R. Kupfer, J. Troschitz, and M. Gude, “In Situ Computed Tomography—Analysis of a Single-Lap Shear Test with Clinch Points,” Materials, vol. 14, no. 8, Art. no. 1859, 2021, doi: 10.3390/ma14081859.' mla: Köhler, Daniel, et al. “In Situ Computed Tomography—Analysis of a Single-Lap Shear Test with Clinch Points.” Materials, vol. 14, no. 8, 1859, MDPI AG, 2021, doi:10.3390/ma14081859. short: D. Köhler, R. Kupfer, J. Troschitz, M. Gude, Materials 14 (2021). date_created: 2024-02-06T15:05:43Z date_updated: 2025-06-02T20:20:32Z department: - _id: '157' - _id: '43' doi: 10.3390/ma14081859 intvolume: ' 14' issue: '8' keyword: - General Materials Science language: - iso: eng project: - _id: '130' grant_number: '418701707' name: 'TRR 285: TRR 285' - _id: '133' name: 'TRR 285 - C: TRR 285 - Project Area C' - _id: '148' name: 'TRR 285 – C04: TRR 285 - Subproject C04' publication: Materials publication_identifier: issn: - 1996-1944 publication_status: published publisher: MDPI AG status: public title: In Situ Computed Tomography—Analysis of a Single-Lap Shear Test with Clinch Points type: journal_article user_id: '83408' volume: 14 year: '2021' ... --- _id: '51201' abstract: - lang: eng text: In lightweight design, clinching is a cost-efficient solution as the joint is created through localized cold-forming of the joining parts. A clinch point’s quality is usually assessed using ex-situ destructive testing methods. These, however, are unable to detect phenomena immediately during the joining process. For instance, elastic deformations reverse and cracks close after unloading. In-situ methods such as the force-displacement evaluation are used to control a clinching process, though deviations in the clinch point geometry cannot be derived with this method. To overcome these limitations, the clinching process can be investigated using in-situ computed tomography (in-situ CT). However, a clinching tool made of steel would cause strong artefacts and a high attenuation in the CT measurement, reducing the significance of this method. Additionally, when joining parts of the same material, the sheet-sheet interface is hardly detectable. This work aims at identifying, firstly, tool materials that allow artefact-reduced CT measurements during clinching, and, secondly, radiopaque materials that can be applied between the joining parts to enhance the detectability of the sheet-sheet interface. Therefore, both CT-suitable tool materials and radiopaque materials are selected and experimentally investigated. In the clinching process, two aluminium sheets with radiopaque material in between are clinched in a single-step (rotationally symmetric joint without cut section). It is shown that e.g. silicon nitride is suited as tool material and a tin layer is suitable to enhance the detectability of the sheet-sheet interface. author: - first_name: Daniel full_name: Köhler, Daniel last_name: Köhler - first_name: Robert full_name: Kupfer, Robert last_name: Kupfer - first_name: Juliane full_name: Troschitz, Juliane last_name: Troschitz - first_name: Maik full_name: Gude, Maik last_name: Gude citation: ama: Köhler D, Kupfer R, Troschitz J, Gude M. Clinching in In-situ CT – Experimental Study on Suitable Tool Materials. ESAFORM 2021. Published online 2021. doi:10.25518/esaform21.2781 apa: Köhler, D., Kupfer, R., Troschitz, J., & Gude, M. (2021). Clinching in In-situ CT – Experimental Study on Suitable Tool Materials. ESAFORM 2021. https://doi.org/10.25518/esaform21.2781 bibtex: '@article{Köhler_Kupfer_Troschitz_Gude_2021, title={Clinching in In-situ CT – Experimental Study on Suitable Tool Materials}, DOI={10.25518/esaform21.2781}, journal={ESAFORM 2021}, publisher={University of Liege}, author={Köhler, Daniel and Kupfer, Robert and Troschitz, Juliane and Gude, Maik}, year={2021} }' chicago: Köhler, Daniel, Robert Kupfer, Juliane Troschitz, and Maik Gude. “Clinching in In-situ CT – Experimental Study on Suitable Tool Materials.” ESAFORM 2021, 2021. https://doi.org/10.25518/esaform21.2781. ieee: 'D. Köhler, R. Kupfer, J. Troschitz, and M. Gude, “Clinching in In-situ CT – Experimental Study on Suitable Tool Materials,” ESAFORM 2021, 2021, doi: 10.25518/esaform21.2781.' mla: Köhler, Daniel, et al. “Clinching in In-situ CT – Experimental Study on Suitable Tool Materials.” ESAFORM 2021, University of Liege, 2021, doi:10.25518/esaform21.2781. short: D. Köhler, R. Kupfer, J. Troschitz, M. Gude, ESAFORM 2021 (2021). date_created: 2024-02-06T15:05:58Z date_updated: 2025-06-02T20:20:21Z department: - _id: '157' - _id: '43' doi: 10.25518/esaform21.2781 language: - iso: fre project: - _id: '130' grant_number: '418701707' name: 'TRR 285: TRR 285' - _id: '133' name: 'TRR 285 - C: TRR 285 - Project Area C' - _id: '148' name: 'TRR 285 – C04: TRR 285 - Subproject C04' publication: ESAFORM 2021 publication_status: published publisher: University of Liege status: public title: Clinching in In-situ CT – Experimental Study on Suitable Tool Materials type: journal_article user_id: '83408' year: '2021' ... --- _id: '51198' article_number: '100089' author: - first_name: D. full_name: Köhler, D. last_name: Köhler - first_name: B. full_name: Sadeghian, B. last_name: Sadeghian - first_name: J. full_name: Troschitz, J. last_name: Troschitz - first_name: R. full_name: Kupfer, R. last_name: Kupfer - first_name: M. full_name: Gude, M. last_name: Gude - first_name: A. full_name: Brosius, A. last_name: Brosius citation: ama: Köhler D, Sadeghian B, Troschitz J, Kupfer R, Gude M, Brosius A. Characterisation of lateral offsets in clinch points with computed tomography and transient dynamic analysis. Journal of Advanced Joining Processes. 2021;5. doi:10.1016/j.jajp.2021.100089 apa: Köhler, D., Sadeghian, B., Troschitz, J., Kupfer, R., Gude, M., & Brosius, A. (2021). Characterisation of lateral offsets in clinch points with computed tomography and transient dynamic analysis. Journal of Advanced Joining Processes, 5, Article 100089. https://doi.org/10.1016/j.jajp.2021.100089 bibtex: '@article{Köhler_Sadeghian_Troschitz_Kupfer_Gude_Brosius_2021, title={Characterisation of lateral offsets in clinch points with computed tomography and transient dynamic analysis}, volume={5}, DOI={10.1016/j.jajp.2021.100089}, number={100089}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Köhler, D. and Sadeghian, B. and Troschitz, J. and Kupfer, R. and Gude, M. and Brosius, A.}, year={2021} }' chicago: Köhler, D., B. Sadeghian, J. Troschitz, R. Kupfer, M. Gude, and A. Brosius. “Characterisation of Lateral Offsets in Clinch Points with Computed Tomography and Transient Dynamic Analysis.” Journal of Advanced Joining Processes 5 (2021). https://doi.org/10.1016/j.jajp.2021.100089. ieee: 'D. Köhler, B. Sadeghian, J. Troschitz, R. Kupfer, M. Gude, and A. Brosius, “Characterisation of lateral offsets in clinch points with computed tomography and transient dynamic analysis,” Journal of Advanced Joining Processes, vol. 5, Art. no. 100089, 2021, doi: 10.1016/j.jajp.2021.100089.' mla: Köhler, D., et al. “Characterisation of Lateral Offsets in Clinch Points with Computed Tomography and Transient Dynamic Analysis.” Journal of Advanced Joining Processes, vol. 5, 100089, Elsevier BV, 2021, doi:10.1016/j.jajp.2021.100089. short: D. Köhler, B. Sadeghian, J. Troschitz, R. Kupfer, M. Gude, A. Brosius, Journal of Advanced Joining Processes 5 (2021). date_created: 2024-02-06T15:05:00Z date_updated: 2025-06-02T20:21:00Z department: - _id: '157' - _id: '43' doi: 10.1016/j.jajp.2021.100089 intvolume: ' 5' keyword: - Mechanical Engineering - Mechanics of Materials - Engineering (miscellaneous) - Chemical Engineering (miscellaneous) language: - iso: eng project: - _id: '130' grant_number: '418701707' name: 'TRR 285: TRR 285' - _id: '133' name: 'TRR 285 - C: TRR 285 - Project Area C' - _id: '148' name: 'TRR 285 – C04: TRR 285 - Subproject C04' publication: Journal of Advanced Joining Processes publication_identifier: issn: - 2666-3309 publication_status: published publisher: Elsevier BV status: public title: Characterisation of lateral offsets in clinch points with computed tomography and transient dynamic analysis type: journal_article user_id: '83408' volume: 5 year: '2021' ... --- _id: '23431' abstract: - lang: eng text: As an effective and accurate method for modelling composite materials, mean-field homogenization is still not well studied in modelling non-linear and damage behaviours of UD composites. Investigated micro FE-simulations show that the matrix of UD composites exhibits different average plastic behaviour, named as average asymmetric matrix plasticity (AAMP), when the composite behaves different under shear, longitudinal and transverse loadings. In this study, a non-linear mean-field debonding model (NMFDM) combining a mean-field model and a fibre–matrix interface debonding model, is developed to simulate UD composites under consideration of AAMP, fibre–matrix interface damage and progressive failure. AAMP is considered by using so-called stress mode factor, which is expressed in terms of basic invariants of the matrix deviatoric stress tensor and is used as an indicator for detection of differences in the loading mode. The material behaviour of UD composites with imperfect interface is assumed identical as for perfect interface and stiffness reduced fibres. Progressive failure criteria are established with consideration of fibre breakage and matrix crack for different fibre orientations. As a representative example for the NMFDM, a C30/E201 UD composite is studied. To verify the model, experiments are conducted on polymers, carbon fibres and UD CFRPs. Finally, the model is applied to simulate a perforated CFRP laminate, which shows excellent prediction ability on deformation, debonding and progressive failure. article_number: '109209' author: - first_name: C. full_name: Cheng, C. last_name: Cheng - first_name: Z. full_name: Wang, Z. last_name: Wang - first_name: Z. full_name: Jin, Z. last_name: Jin - first_name: X. full_name: Ju, X. last_name: Ju - first_name: Swetlana full_name: Schweizer, Swetlana id: '8938' last_name: Schweizer - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster - first_name: Rolf full_name: Mahnken, Rolf id: '335' last_name: Mahnken citation: ama: 'Cheng C, Wang Z, Jin Z, et al. Non-linear mean-field modelling of UD composite laminates accounting for average asymmetric plasticity of the matrix, debonding and progressive failure. Composites Part B: Engineering. 2021;224. doi:10.1016/j.compositesb.2021.109209' apa: 'Cheng, C., Wang, Z., Jin, Z., Ju, X., Schweizer, S., Tröster, T., & Mahnken, R. (2021). Non-linear mean-field modelling of UD composite laminates accounting for average asymmetric plasticity of the matrix, debonding and progressive failure. Composites Part B: Engineering, 224, Article 109209. https://doi.org/10.1016/j.compositesb.2021.109209' bibtex: '@article{Cheng_Wang_Jin_Ju_Schweizer_Tröster_Mahnken_2021, title={Non-linear mean-field modelling of UD composite laminates accounting for average asymmetric plasticity of the matrix, debonding and progressive failure}, volume={224}, DOI={10.1016/j.compositesb.2021.109209}, number={109209}, journal={Composites Part B: Engineering}, author={Cheng, C. and Wang, Z. and Jin, Z. and Ju, X. and Schweizer, Swetlana and Tröster, Thomas and Mahnken, Rolf}, year={2021} }' chicago: 'Cheng, C., Z. Wang, Z. Jin, X. Ju, Swetlana Schweizer, Thomas Tröster, and Rolf Mahnken. “Non-Linear Mean-Field Modelling of UD Composite Laminates Accounting for Average Asymmetric Plasticity of the Matrix, Debonding and Progressive Failure.” Composites Part B: Engineering 224 (2021). https://doi.org/10.1016/j.compositesb.2021.109209.' ieee: 'C. Cheng et al., “Non-linear mean-field modelling of UD composite laminates accounting for average asymmetric plasticity of the matrix, debonding and progressive failure,” Composites Part B: Engineering, vol. 224, Art. no. 109209, 2021, doi: 10.1016/j.compositesb.2021.109209.' mla: 'Cheng, C., et al. “Non-Linear Mean-Field Modelling of UD Composite Laminates Accounting for Average Asymmetric Plasticity of the Matrix, Debonding and Progressive Failure.” Composites Part B: Engineering, vol. 224, 109209, 2021, doi:10.1016/j.compositesb.2021.109209.' short: 'C. Cheng, Z. Wang, Z. Jin, X. Ju, S. Schweizer, T. Tröster, R. Mahnken, Composites Part B: Engineering 224 (2021).' date_created: 2021-08-18T06:20:21Z date_updated: 2025-06-06T08:08:32Z department: - _id: '9' - _id: '154' - _id: '321' - _id: '149' doi: 10.1016/j.compositesb.2021.109209 intvolume: ' 224' keyword: - Non-linear mean-field homogenization Average asymmetric plasticity of matrix Fibre–matrix interface debonding Micro-mechanical FE-simulation Progressive failure language: - iso: eng publication: 'Composites Part B: Engineering' publication_identifier: issn: - 1359-8368 publication_status: published quality_controlled: '1' status: public title: Non-linear mean-field modelling of UD composite laminates accounting for average asymmetric plasticity of the matrix, debonding and progressive failure type: journal_article user_id: '15952' volume: 224 year: '2021' ... --- _id: '29293' article_number: '100065' author: - first_name: Sven full_name: Martin, Sven id: '38177' last_name: Martin - first_name: Jan full_name: Schütte, Jan id: '22109' last_name: Schütte orcid: 0000-0001-9025-9742 - first_name: C. full_name: Bäumler, C. last_name: Bäumler - first_name: Walter full_name: Sextro, Walter id: '21220' last_name: Sextro - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster citation: ama: Martin S, Schütte J, Bäumler C, Sextro W, Tröster T. Identification of joints for a load-adapted shape in a body in white using steady state vehicle simulations. Forces in Mechanics. 2021;6. doi:10.1016/j.finmec.2021.100065 apa: Martin, S., Schütte, J., Bäumler, C., Sextro, W., & Tröster, T. (2021). Identification of joints for a load-adapted shape in a body in white using steady state vehicle simulations. Forces in Mechanics, 6, Article 100065. https://doi.org/10.1016/j.finmec.2021.100065 bibtex: '@article{Martin_Schütte_Bäumler_Sextro_Tröster_2021, title={Identification of joints for a load-adapted shape in a body in white using steady state vehicle simulations}, volume={6}, DOI={10.1016/j.finmec.2021.100065}, number={100065}, journal={Forces in Mechanics}, publisher={Elsevier BV}, author={Martin, Sven and Schütte, Jan and Bäumler, C. and Sextro, Walter and Tröster, Thomas}, year={2021} }' chicago: Martin, Sven, Jan Schütte, C. Bäumler, Walter Sextro, and Thomas Tröster. “Identification of Joints for a Load-Adapted Shape in a Body in White Using Steady State Vehicle Simulations.” Forces in Mechanics 6 (2021). https://doi.org/10.1016/j.finmec.2021.100065. ieee: 'S. Martin, J. Schütte, C. Bäumler, W. Sextro, and T. Tröster, “Identification of joints for a load-adapted shape in a body in white using steady state vehicle simulations,” Forces in Mechanics, vol. 6, Art. no. 100065, 2021, doi: 10.1016/j.finmec.2021.100065.' mla: Martin, Sven, et al. “Identification of Joints for a Load-Adapted Shape in a Body in White Using Steady State Vehicle Simulations.” Forces in Mechanics, vol. 6, 100065, Elsevier BV, 2021, doi:10.1016/j.finmec.2021.100065. short: S. Martin, J. Schütte, C. Bäumler, W. Sextro, T. Tröster, Forces in Mechanics 6 (2021). date_created: 2022-01-12T10:30:02Z date_updated: 2025-06-06T08:05:56Z department: - _id: '151' - _id: '630' - _id: '149' - _id: '321' - _id: '9' doi: 10.1016/j.finmec.2021.100065 intvolume: ' 6' language: - iso: eng main_file_link: - open_access: '1' url: https://www.sciencedirect.com/science/article/pii/S2666359721000561 oa: '1' project: - _id: '130' grant_number: '418701707' name: 'TRR 285: TRR 285' - _id: '132' name: 'TRR 285 - B: TRR 285 - Project Area B' - _id: '140' name: 'TRR 285 – B01: TRR 285 - Subproject B01' publication: Forces in Mechanics publication_identifier: issn: - 2666-3597 publication_status: published publisher: Elsevier BV quality_controlled: '1' status: public title: Identification of joints for a load-adapted shape in a body in white using steady state vehicle simulations type: journal_article user_id: '15952' volume: 6 year: '2021' ... --- _id: '41508' article_number: '142312' author: - first_name: Alan Adam full_name: Camberg, Alan Adam id: '60544' last_name: Camberg - first_name: Anatolii full_name: Andreiev, Anatolii id: '50215' last_name: Andreiev - first_name: Sudipta full_name: Pramanik, Sudipta last_name: Pramanik - first_name: Kay-Peter full_name: Hoyer, Kay-Peter id: '48411' last_name: Hoyer - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster - first_name: Mirko full_name: Schaper, Mirko id: '43720' last_name: Schaper citation: ama: 'Camberg AA, Andreiev A, Pramanik S, Hoyer K-P, Tröster T, Schaper M. Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks. Materials Science and Engineering: A. 2021;831. doi:10.1016/j.msea.2021.142312' apa: 'Camberg, A. A., Andreiev, A., Pramanik, S., Hoyer, K.-P., Tröster, T., & Schaper, M. (2021). Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks. Materials Science and Engineering: A, 831, Article 142312. https://doi.org/10.1016/j.msea.2021.142312' bibtex: '@article{Camberg_Andreiev_Pramanik_Hoyer_Tröster_Schaper_2021, title={Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks}, volume={831}, DOI={10.1016/j.msea.2021.142312}, number={142312}, journal={Materials Science and Engineering: A}, publisher={Elsevier BV}, author={Camberg, Alan Adam and Andreiev, Anatolii and Pramanik, Sudipta and Hoyer, Kay-Peter and Tröster, Thomas and Schaper, Mirko}, year={2021} }' chicago: 'Camberg, Alan Adam, Anatolii Andreiev, Sudipta Pramanik, Kay-Peter Hoyer, Thomas Tröster, and Mirko Schaper. “Strength Enhancement of AlMg Sheet Metal Parts by Rapid Heating and Subsequent Cold Die Stamping of Severely Cold-Rolled Blanks.” Materials Science and Engineering: A 831 (2021). https://doi.org/10.1016/j.msea.2021.142312.' ieee: 'A. A. Camberg, A. Andreiev, S. Pramanik, K.-P. Hoyer, T. Tröster, and M. Schaper, “Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks,” Materials Science and Engineering: A, vol. 831, Art. no. 142312, 2021, doi: 10.1016/j.msea.2021.142312.' mla: 'Camberg, Alan Adam, et al. “Strength Enhancement of AlMg Sheet Metal Parts by Rapid Heating and Subsequent Cold Die Stamping of Severely Cold-Rolled Blanks.” Materials Science and Engineering: A, vol. 831, 142312, Elsevier BV, 2021, doi:10.1016/j.msea.2021.142312.' short: 'A.A. Camberg, A. Andreiev, S. Pramanik, K.-P. Hoyer, T. Tröster, M. Schaper, Materials Science and Engineering: A 831 (2021).' date_created: 2023-02-02T14:31:53Z date_updated: 2025-06-06T08:07:18Z department: - _id: '9' - _id: '158' - _id: '149' - _id: '321' doi: 10.1016/j.msea.2021.142312 intvolume: ' 831' keyword: - Mechanical Engineering - Mechanics of Materials - Condensed Matter Physics - General Materials Science language: - iso: eng publication: 'Materials Science and Engineering: A' publication_identifier: issn: - 0921-5093 publication_status: published publisher: Elsevier BV status: public title: Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks type: journal_article user_id: '15952' volume: 831 year: '2021' ... --- _id: '27700' article_number: '142312' author: - first_name: Alan Adam full_name: Camberg, Alan Adam id: '60544' last_name: Camberg - first_name: Anatolii full_name: Andreiev, Anatolii id: '50215' last_name: Andreiev - first_name: Sudipta full_name: Pramanik, Sudipta last_name: Pramanik - first_name: Kay-Peter full_name: Hoyer, Kay-Peter id: '48411' last_name: Hoyer - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster - first_name: Mirko full_name: Schaper, Mirko id: '43720' last_name: Schaper citation: ama: 'Camberg AA, Andreiev A, Pramanik S, Hoyer K-P, Tröster T, Schaper M. Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks. Materials Science and Engineering: A. Published online 2021. doi:10.1016/j.msea.2021.142312' apa: 'Camberg, A. A., Andreiev, A., Pramanik, S., Hoyer, K.-P., Tröster, T., & Schaper, M. (2021). Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks. Materials Science and Engineering: A, Article 142312. https://doi.org/10.1016/j.msea.2021.142312' bibtex: '@article{Camberg_Andreiev_Pramanik_Hoyer_Tröster_Schaper_2021, title={Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks}, DOI={10.1016/j.msea.2021.142312}, number={142312}, journal={Materials Science and Engineering: A}, publisher={Elsevier}, author={Camberg, Alan Adam and Andreiev, Anatolii and Pramanik, Sudipta and Hoyer, Kay-Peter and Tröster, Thomas and Schaper, Mirko}, year={2021} }' chicago: 'Camberg, Alan Adam, Anatolii Andreiev, Sudipta Pramanik, Kay-Peter Hoyer, Thomas Tröster, and Mirko Schaper. “Strength Enhancement of AlMg Sheet Metal Parts by Rapid Heating and Subsequent Cold Die Stamping of Severely Cold-Rolled Blanks.” Materials Science and Engineering: A, 2021. https://doi.org/10.1016/j.msea.2021.142312.' ieee: 'A. A. Camberg, A. Andreiev, S. Pramanik, K.-P. Hoyer, T. Tröster, and M. Schaper, “Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks,” Materials Science and Engineering: A, Art. no. 142312, 2021, doi: 10.1016/j.msea.2021.142312.' mla: 'Camberg, Alan Adam, et al. “Strength Enhancement of AlMg Sheet Metal Parts by Rapid Heating and Subsequent Cold Die Stamping of Severely Cold-Rolled Blanks.” Materials Science and Engineering: A, 142312, Elsevier, 2021, doi:10.1016/j.msea.2021.142312.' short: 'A.A. Camberg, A. Andreiev, S. Pramanik, K.-P. Hoyer, T. Tröster, M. Schaper, Materials Science and Engineering: A (2021).' date_created: 2021-11-22T12:05:46Z date_updated: 2025-06-06T08:06:32Z department: - _id: '9' - _id: '158' - _id: '149' - _id: '321' doi: 10.1016/j.msea.2021.142312 language: - iso: eng publication: 'Materials Science and Engineering: A' publication_identifier: issn: - 0921-5093 publication_status: published publisher: Elsevier quality_controlled: '1' status: public title: Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks type: journal_article user_id: '15952' year: '2021' ... --- _id: '29086' author: - first_name: Welf-G full_name: Drossel, Welf-G last_name: Drossel - first_name: Mathias full_name: Bobbert, Mathias id: '7850' last_name: Bobbert - first_name: Marcus full_name: Böhme, Marcus last_name: Böhme - first_name: Christian full_name: Dammann, Christian last_name: Dammann - first_name: Axel full_name: Dittes, Axel last_name: Dittes - first_name: Mina full_name: Gießmann, Mina last_name: Gießmann - first_name: Christian full_name: Hühne, Christian last_name: Hühne - first_name: Jörn full_name: Ihlemann, Jörn last_name: Ihlemann - first_name: Robert full_name: Kießling, Robert last_name: Kießling - first_name: Thomas full_name: Lampke, Thomas last_name: Lampke - first_name: Peter full_name: Lenz, Peter id: '49691' last_name: Lenz - first_name: Rolf full_name: Mahnken, Rolf id: '335' last_name: Mahnken - first_name: Gerson full_name: Meschut, Gerson id: '32056' last_name: Meschut orcid: 0000-0002-2763-1246 - first_name: Roland full_name: Müller, Roland last_name: Müller - first_name: Matthias full_name: Nier, Matthias last_name: Nier - first_name: Robert full_name: Prussak, Robert last_name: Prussak - first_name: Matthias full_name: Riemer, Matthias last_name: Riemer - first_name: Sascha full_name: Sander, Sascha id: '23175' last_name: Sander - first_name: Mirko full_name: Schaper, Mirko id: '43720' last_name: Schaper - first_name: Ingolf full_name: Scharf, Ingolf last_name: Scharf - first_name: Mario full_name: Scholze, Mario last_name: Scholze - first_name: Stephan-Daniel full_name: Schwöbel, Stephan-Daniel last_name: Schwöbel - first_name: Semen full_name: Sharafiev, Semen last_name: Sharafiev - first_name: Michael full_name: Sinapius, Michael last_name: Sinapius - first_name: Daniel full_name: Stefaniak, Daniel last_name: Stefaniak - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster - first_name: Martin F. -X. full_name: Wagner, Martin F. -X. last_name: Wagner - first_name: Zheng full_name: Wang, Zheng last_name: Wang - first_name: Carolin full_name: Zinn, Carolin last_name: Zinn citation: ama: 'Drossel W-G, Bobbert M, Böhme M, et al. Hybridprofile für Trag- und Crashstrukturen. In: Intrinsische Hybridverbunde Für Leichtbautragstrukturen. ; 2021. doi:10.1007/978-3-662-62833-1_3' apa: Drossel, W.-G., Bobbert, M., Böhme, M., Dammann, C., Dittes, A., Gießmann, M., Hühne, C., Ihlemann, J., Kießling, R., Lampke, T., Lenz, P., Mahnken, R., Meschut, G., Müller, R., Nier, M., Prussak, R., Riemer, M., Sander, S., Schaper, M., … Zinn, C. (2021). Hybridprofile für Trag- und Crashstrukturen. In Intrinsische Hybridverbunde für Leichtbautragstrukturen. https://doi.org/10.1007/978-3-662-62833-1_3 bibtex: '@inbook{Drossel_Bobbert_Böhme_Dammann_Dittes_Gießmann_Hühne_Ihlemann_Kießling_Lampke_et al._2021, place={Berlin, Heidelberg}, title={Hybridprofile für Trag- und Crashstrukturen}, DOI={10.1007/978-3-662-62833-1_3}, booktitle={Intrinsische Hybridverbunde für Leichtbautragstrukturen}, author={Drossel, Welf-G and Bobbert, Mathias and Böhme, Marcus and Dammann, Christian and Dittes, Axel and Gießmann, Mina and Hühne, Christian and Ihlemann, Jörn and Kießling, Robert and Lampke, Thomas and et al.}, year={2021} }' chicago: Drossel, Welf-G, Mathias Bobbert, Marcus Böhme, Christian Dammann, Axel Dittes, Mina Gießmann, Christian Hühne, et al. “Hybridprofile Für Trag- Und Crashstrukturen.” In Intrinsische Hybridverbunde Für Leichtbautragstrukturen. Berlin, Heidelberg, 2021. https://doi.org/10.1007/978-3-662-62833-1_3. ieee: W.-G. Drossel et al., “Hybridprofile für Trag- und Crashstrukturen,” in Intrinsische Hybridverbunde für Leichtbautragstrukturen, Berlin, Heidelberg, 2021. mla: Drossel, Welf-G., et al. “Hybridprofile Für Trag- Und Crashstrukturen.” Intrinsische Hybridverbunde Für Leichtbautragstrukturen, 2021, doi:10.1007/978-3-662-62833-1_3. short: 'W.-G. Drossel, M. Bobbert, M. Böhme, C. Dammann, A. Dittes, M. Gießmann, C. Hühne, J. Ihlemann, R. Kießling, T. Lampke, P. Lenz, R. Mahnken, G. Meschut, R. Müller, M. Nier, R. Prussak, M. Riemer, S. Sander, M. Schaper, I. Scharf, M. Scholze, S.-D. Schwöbel, S. Sharafiev, M. Sinapius, D. Stefaniak, T. Tröster, M.F.-X. Wagner, Z. Wang, C. Zinn, in: Intrinsische Hybridverbunde Für Leichtbautragstrukturen, Berlin, Heidelberg, 2021.' date_created: 2021-12-22T12:29:50Z date_updated: 2025-06-06T08:09:10Z department: - _id: '9' - _id: '154' - _id: '321' - _id: '149' doi: 10.1007/978-3-662-62833-1_3 language: - iso: eng place: Berlin, Heidelberg publication: Intrinsische Hybridverbunde für Leichtbautragstrukturen publication_identifier: isbn: - '9783662628324' - '9783662628331' publication_status: published quality_controlled: '1' status: public title: Hybridprofile für Trag- und Crashstrukturen type: book_chapter user_id: '15952' year: '2021' ... --- _id: '26996' citation: ama: Koch R, Gräßler I, Zimmer D, Tröster T, eds. Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess - Ergebnisbericht des BMBF Verbundprojektes OptiAMix. Vol 25. Shaker Verlag; 2021. apa: Koch, R., Gräßler, I., Zimmer, D., & Tröster, T. (Eds.). (2021). Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess - Ergebnisbericht des BMBF Verbundprojektes OptiAMix (Vol. 25). Shaker Verlag. bibtex: '@book{Koch_Gräßler_Zimmer_Tröster_2021, place={Düren}, series={Forschungsberichte des Direct Manufacturing Research Centers (DMRC)}, title={Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess - Ergebnisbericht des BMBF Verbundprojektes OptiAMix}, volume={25}, publisher={Shaker Verlag}, year={2021}, collection={Forschungsberichte des Direct Manufacturing Research Centers (DMRC)} }' chicago: 'Koch, Rainer, Iris Gräßler, Detmar Zimmer, and Thomas Tröster, eds. Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess - Ergebnisbericht des BMBF Verbundprojektes OptiAMix. Vol. 25. Forschungsberichte des Direct Manufacturing Research Centers (DMRC). Düren: Shaker Verlag, 2021.' ieee: 'R. Koch, I. Gräßler, D. Zimmer, and T. Tröster, Eds., Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess - Ergebnisbericht des BMBF Verbundprojektes OptiAMix, vol. 25. Düren: Shaker Verlag, 2021.' mla: Koch, Rainer, et al., editors. Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess - Ergebnisbericht des BMBF Verbundprojektes OptiAMix. Shaker Verlag, 2021. short: R. Koch, I. Gräßler, D. Zimmer, T. Tröster, eds., Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess - Ergebnisbericht des BMBF Verbundprojektes OptiAMix, Shaker Verlag, Düren, 2021. date_created: 2021-10-28T15:06:42Z date_updated: 2025-06-06T08:14:22Z department: - _id: '152' - _id: '144' - _id: '146' - _id: '321' - _id: '149' editor: - first_name: Rainer full_name: Koch, Rainer last_name: Koch - first_name: Iris full_name: Gräßler, Iris id: '47565' last_name: Gräßler orcid: 0000-0001-5765-971X - first_name: Detmar full_name: Zimmer, Detmar id: '604' last_name: Zimmer - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster intvolume: ' 25' language: - iso: ger page: '222' place: Düren publication_identifier: isbn: - 978-3-8440-7932-6 publication_status: published publisher: Shaker Verlag series_title: Forschungsberichte des Direct Manufacturing Research Centers (DMRC) status: public title: Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess - Ergebnisbericht des BMBF Verbundprojektes OptiAMix type: book_editor user_id: '15952' volume: 25 year: '2021' ... --- _id: '22859' article_type: original author: - first_name: Richard full_name: Grothe, Richard last_name: Grothe - first_name: Jan Andre full_name: Striewe, Jan Andre id: '29413' last_name: Striewe - first_name: Dennis full_name: Meinderink, Dennis id: '32378' last_name: Meinderink orcid: 0000-0002-2755-6514 - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster - first_name: Guido full_name: Grundmeier, Guido id: '194' last_name: Grundmeier citation: ama: Grothe R, Striewe JA, Meinderink D, Tröster T, Grundmeier G. Enhanced corrosion resistance of adhesive/galvanised steel interfaces by nanocrystalline ZnO thin film deposition and molecular adhesion promoting films. The Journal of Adhesion. Published online 2021. doi:10.1080/00218464.2021.1957676 apa: Grothe, R., Striewe, J. A., Meinderink, D., Tröster, T., & Grundmeier, G. (2021). Enhanced corrosion resistance of adhesive/galvanised steel interfaces by nanocrystalline ZnO thin film deposition and molecular adhesion promoting films. The Journal of Adhesion. https://doi.org/10.1080/00218464.2021.1957676 bibtex: '@article{Grothe_Striewe_Meinderink_Tröster_Grundmeier_2021, title={Enhanced corrosion resistance of adhesive/galvanised steel interfaces by nanocrystalline ZnO thin film deposition and molecular adhesion promoting films}, DOI={10.1080/00218464.2021.1957676}, journal={The Journal of Adhesion}, publisher={Taylor & Francis }, author={Grothe, Richard and Striewe, Jan Andre and Meinderink, Dennis and Tröster, Thomas and Grundmeier, Guido}, year={2021} }' chicago: Grothe, Richard, Jan Andre Striewe, Dennis Meinderink, Thomas Tröster, and Guido Grundmeier. “Enhanced Corrosion Resistance of Adhesive/Galvanised Steel Interfaces by Nanocrystalline ZnO Thin Film Deposition and Molecular Adhesion Promoting Films.” The Journal of Adhesion, 2021. https://doi.org/10.1080/00218464.2021.1957676. ieee: 'R. Grothe, J. A. Striewe, D. Meinderink, T. Tröster, and G. Grundmeier, “Enhanced corrosion resistance of adhesive/galvanised steel interfaces by nanocrystalline ZnO thin film deposition and molecular adhesion promoting films,” The Journal of Adhesion, 2021, doi: 10.1080/00218464.2021.1957676.' mla: Grothe, Richard, et al. “Enhanced Corrosion Resistance of Adhesive/Galvanised Steel Interfaces by Nanocrystalline ZnO Thin Film Deposition and Molecular Adhesion Promoting Films.” The Journal of Adhesion, Taylor & Francis , 2021, doi:10.1080/00218464.2021.1957676. short: R. Grothe, J.A. Striewe, D. Meinderink, T. Tröster, G. Grundmeier, The Journal of Adhesion (2021). date_created: 2021-07-27T14:37:40Z date_updated: 2025-06-06T08:15:45Z department: - _id: '302' - _id: '149' - _id: '321' - _id: '9' doi: 10.1080/00218464.2021.1957676 language: - iso: eng publication: The Journal of Adhesion publisher: 'Taylor & Francis ' quality_controlled: '1' status: public title: Enhanced corrosion resistance of adhesive/galvanised steel interfaces by nanocrystalline ZnO thin film deposition and molecular adhesion promoting films type: journal_article user_id: '15952' year: '2021' ... --- _id: '24130' article_number: '107146' author: - first_name: A. full_name: Magnier, A. last_name: Magnier - first_name: T. full_name: Wu, T. last_name: Wu - first_name: Steffen Rainer full_name: Tinkloh, Steffen Rainer id: '72722' last_name: Tinkloh - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster - first_name: B. full_name: Scholtes, B. last_name: Scholtes - first_name: T. full_name: Niendorf, T. last_name: Niendorf citation: ama: Magnier A, Wu T, Tinkloh SR, Tröster T, Scholtes B, Niendorf T. On the reliability of residual stress measurements in unidirectional carbon fibre reinforced epoxy composites. Polymer Testing. Published online 2021. doi:10.1016/j.polymertesting.2021.107146 apa: Magnier, A., Wu, T., Tinkloh, S. R., Tröster, T., Scholtes, B., & Niendorf, T. (2021). On the reliability of residual stress measurements in unidirectional carbon fibre reinforced epoxy composites. Polymer Testing, Article 107146. https://doi.org/10.1016/j.polymertesting.2021.107146 bibtex: '@article{Magnier_Wu_Tinkloh_Tröster_Scholtes_Niendorf_2021, title={On the reliability of residual stress measurements in unidirectional carbon fibre reinforced epoxy composites}, DOI={10.1016/j.polymertesting.2021.107146}, number={107146}, journal={Polymer Testing}, author={Magnier, A. and Wu, T. and Tinkloh, Steffen Rainer and Tröster, Thomas and Scholtes, B. and Niendorf, T.}, year={2021} }' chicago: Magnier, A., T. Wu, Steffen Rainer Tinkloh, Thomas Tröster, B. Scholtes, and T. Niendorf. “On the Reliability of Residual Stress Measurements in Unidirectional Carbon Fibre Reinforced Epoxy Composites.” Polymer Testing, 2021. https://doi.org/10.1016/j.polymertesting.2021.107146. ieee: 'A. Magnier, T. Wu, S. R. Tinkloh, T. Tröster, B. Scholtes, and T. Niendorf, “On the reliability of residual stress measurements in unidirectional carbon fibre reinforced epoxy composites,” Polymer Testing, Art. no. 107146, 2021, doi: 10.1016/j.polymertesting.2021.107146.' mla: Magnier, A., et al. “On the Reliability of Residual Stress Measurements in Unidirectional Carbon Fibre Reinforced Epoxy Composites.” Polymer Testing, 107146, 2021, doi:10.1016/j.polymertesting.2021.107146. short: A. Magnier, T. Wu, S.R. Tinkloh, T. Tröster, B. Scholtes, T. Niendorf, Polymer Testing (2021). date_created: 2021-09-10T08:21:11Z date_updated: 2025-06-06T08:09:50Z department: - _id: '321' - _id: '149' - _id: '9' doi: 10.1016/j.polymertesting.2021.107146 language: - iso: eng project: - _id: '52' name: Computing Resources Provided by the Paderborn Center for Parallel Computing publication: Polymer Testing publication_identifier: issn: - 0142-9418 publication_status: published quality_controlled: '1' status: public title: On the reliability of residual stress measurements in unidirectional carbon fibre reinforced epoxy composites type: journal_article user_id: '15952' year: '2021' ... --- _id: '23898' article_number: '117183' author: - first_name: Anatolii full_name: Andreiev, Anatolii id: '50215' last_name: Andreiev - first_name: Kay-Peter full_name: Hoyer, Kay-Peter id: '48411' last_name: Hoyer - first_name: Dimitri full_name: Dula, Dimitri last_name: Dula - first_name: Florian full_name: Hengsbach, Florian id: '14073' last_name: Hengsbach - first_name: Michael full_name: Haase, Michael id: '35970' last_name: Haase - first_name: Jan full_name: Gierse, Jan id: '28610' last_name: Gierse - first_name: Detmar full_name: Zimmer, Detmar id: '604' last_name: Zimmer - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster - first_name: Mirko full_name: Schaper, Mirko id: '43720' last_name: Schaper citation: ama: Andreiev A, Hoyer K-P, Dula D, et al. Soft-magnetic behavior of laser beam melted FeSi3 alloy with graded cross-section. Journal of Materials Processing Technology. Published online 2021. doi:10.1016/j.jmatprotec.2021.117183 apa: Andreiev, A., Hoyer, K.-P., Dula, D., Hengsbach, F., Haase, M., Gierse, J., Zimmer, D., Tröster, T., & Schaper, M. (2021). Soft-magnetic behavior of laser beam melted FeSi3 alloy with graded cross-section. Journal of Materials Processing Technology, Article 117183. https://doi.org/10.1016/j.jmatprotec.2021.117183 bibtex: '@article{Andreiev_Hoyer_Dula_Hengsbach_Haase_Gierse_Zimmer_Tröster_Schaper_2021, title={Soft-magnetic behavior of laser beam melted FeSi3 alloy with graded cross-section}, DOI={10.1016/j.jmatprotec.2021.117183}, number={117183}, journal={Journal of Materials Processing Technology}, author={Andreiev, Anatolii and Hoyer, Kay-Peter and Dula, Dimitri and Hengsbach, Florian and Haase, Michael and Gierse, Jan and Zimmer, Detmar and Tröster, Thomas and Schaper, Mirko}, year={2021} }' chicago: Andreiev, Anatolii, Kay-Peter Hoyer, Dimitri Dula, Florian Hengsbach, Michael Haase, Jan Gierse, Detmar Zimmer, Thomas Tröster, and Mirko Schaper. “Soft-Magnetic Behavior of Laser Beam Melted FeSi3 Alloy with Graded Cross-Section.” Journal of Materials Processing Technology, 2021. https://doi.org/10.1016/j.jmatprotec.2021.117183. ieee: 'A. Andreiev et al., “Soft-magnetic behavior of laser beam melted FeSi3 alloy with graded cross-section,” Journal of Materials Processing Technology, Art. no. 117183, 2021, doi: 10.1016/j.jmatprotec.2021.117183.' mla: Andreiev, Anatolii, et al. “Soft-Magnetic Behavior of Laser Beam Melted FeSi3 Alloy with Graded Cross-Section.” Journal of Materials Processing Technology, 117183, 2021, doi:10.1016/j.jmatprotec.2021.117183. short: A. Andreiev, K.-P. Hoyer, D. Dula, F. Hengsbach, M. Haase, J. Gierse, D. Zimmer, T. Tröster, M. Schaper, Journal of Materials Processing Technology (2021). date_created: 2021-09-08T07:29:43Z date_updated: 2025-06-06T08:10:24Z department: - _id: '158' - _id: '149' - _id: '146' - _id: '321' - _id: '9' doi: 10.1016/j.jmatprotec.2021.117183 language: - iso: eng publication: Journal of Materials Processing Technology publication_identifier: issn: - 0924-0136 publication_status: published quality_controlled: '1' status: public title: Soft-magnetic behavior of laser beam melted FeSi3 alloy with graded cross-section type: journal_article user_id: '15952' year: '2021' ...