---
_id: '34223'
abstract:
- lang: eng
text: In this study, quasi-unidirectional continuous fiber reinforced thermoplastics
(CFRTs) are joined with metal sheets via cold formed cylindrical, elliptical and
polygonal pin structures which are directly pressed into the CFRT component after
local infrared heating. In comparison to already available studies, the unique
novelty is the use of non-rotational symmetric pin structures for the CFRT/metal
hybrid joining. Thus, a variation in the fiber orientation in the CFRT component
as well as a variation in the non-rotational symmetric pins’ orientation in relation
to the sample orientation is conducted. The created samples are consequently mechanically
tested via single lap shear experiments in a quasi-static state. Finally, the
failure behavior of the single lap shear samples is investigated with the help
of microscopic images and detailed photographs. In the single lap shear tests,
it could be shown that non-rotational symmetric pin structures lead to an increase
in maximum testing forces of up to 74% when compared to cylindrical pins. However,
when normalized to the pin foot print related joint strength, only one polygonal
pin variation showed increased joint strength in comparison to cylindrical pin
structures. The investigation of the failure behavior showed two distinct failure
modes. The first failure mode was failure of the CFRT component due to an exceedance
of the maximum bearing strength of the pin-hole leading to significant damage
in the CFRT component. The second failure mode was pin-deflection due to the applied
testing load and a subsequent pin extraction from the CFRT component resulting
in significantly less visible damage in the CFRT component. Generally, CFRT failure
is more likely with a fiber orientation of 0° in relation to the load direction
while pin extraction typically occurs with a fiber orientation of 90°. It is assumed
that for future investigations, pin structures with an undercutting shape that
creates an interlocking joint could counteract the tendency for pin-extraction
and consequently lead to increased maximum joint strengths.
article_number: '4962'
author:
- first_name: Julian
full_name: Popp, Julian
last_name: Popp
- first_name: David
full_name: Römisch, David
last_name: Römisch
- first_name: Marion
full_name: Merklein, Marion
last_name: Merklein
- first_name: Dietmar
full_name: Drummer, Dietmar
last_name: Drummer
citation:
ama: Popp J, Römisch D, Merklein M, Drummer D. Joining of CFRT/Steel Hybrid Parts
via Direct Pressing of Cold Formed Non-Rotational Symmetric Pin Structures. Applied
Sciences. 2022;12(10). doi:10.3390/app12104962
apa: Popp, J., Römisch, D., Merklein, M., & Drummer, D. (2022). Joining of CFRT/Steel
Hybrid Parts via Direct Pressing of Cold Formed Non-Rotational Symmetric Pin Structures.
Applied Sciences, 12(10), Article 4962. https://doi.org/10.3390/app12104962
bibtex: '@article{Popp_Römisch_Merklein_Drummer_2022, title={Joining of CFRT/Steel
Hybrid Parts via Direct Pressing of Cold Formed Non-Rotational Symmetric Pin Structures},
volume={12}, DOI={10.3390/app12104962},
number={104962}, journal={Applied Sciences}, publisher={MDPI AG}, author={Popp,
Julian and Römisch, David and Merklein, Marion and Drummer, Dietmar}, year={2022}
}'
chicago: Popp, Julian, David Römisch, Marion Merklein, and Dietmar Drummer. “Joining
of CFRT/Steel Hybrid Parts via Direct Pressing of Cold Formed Non-Rotational Symmetric
Pin Structures.” Applied Sciences 12, no. 10 (2022). https://doi.org/10.3390/app12104962.
ieee: 'J. Popp, D. Römisch, M. Merklein, and D. Drummer, “Joining of CFRT/Steel
Hybrid Parts via Direct Pressing of Cold Formed Non-Rotational Symmetric Pin Structures,”
Applied Sciences, vol. 12, no. 10, Art. no. 4962, 2022, doi: 10.3390/app12104962.'
mla: Popp, Julian, et al. “Joining of CFRT/Steel Hybrid Parts via Direct Pressing
of Cold Formed Non-Rotational Symmetric Pin Structures.” Applied Sciences,
vol. 12, no. 10, 4962, MDPI AG, 2022, doi:10.3390/app12104962.
short: J. Popp, D. Römisch, M. Merklein, D. Drummer, Applied Sciences 12 (2022).
date_created: 2022-12-05T21:48:01Z
date_updated: 2022-12-05T21:49:30Z
doi: 10.3390/app12104962
intvolume: ' 12'
issue: '10'
keyword:
- Fluid Flow and Transfer Processes
- Computer Science Applications
- Process Chemistry and Technology
- General Engineering
- Instrumentation
- General Materials Science
language:
- iso: eng
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '133'
name: 'TRR 285 - C: TRR 285 - Project Area C'
- _id: '145'
name: 'TRR 285 – C01: TRR 285 - Subproject C01'
publication: Applied Sciences
publication_identifier:
issn:
- 2076-3417
publication_status: published
publisher: MDPI AG
status: public
title: Joining of CFRT/Steel Hybrid Parts via Direct Pressing of Cold Formed Non-Rotational
Symmetric Pin Structures
type: journal_article
user_id: '7850'
volume: 12
year: '2022'
...
---
_id: '34225'
abstract:
- lang: eng
text: 'Thermoplastic composites (TPCs) are predestined for use in lightweight structures,
especially for high-volume applications. In many cases, joining is a key factor
for the successful application of TPCs in multi-material systems. Many joining
processes for this material group are based on warm forming the joining zone.
This results in a change of the local material structure characterised by modified
fibre paths, as well as varying fibre contents, which significantly influences
the load-bearing behaviour. During the forming process, many different phenomena
occur simultaneously at different scales. In this paper, the deformation modes
and flow mechanisms of TPCs during forming described in the literature are first
analysed. Based on this, three different joining processes are investigated: embedding
of inserts, moulding of contour joints, and hotclinching. In order to identify
the phenomena occurring in each process and to describe the characteristic resulting
material structure in the joining zones, micrographs as well as computed tomography
(CT) analyses are performed for both individual process stages and final joining
zones.'
article_number: '5454'
author:
- first_name: Juliane
full_name: Troschitz, Juliane
last_name: Troschitz
- first_name: Benjamin
full_name: Gröger, Benjamin
last_name: Gröger
- first_name: Veit
full_name: Würfel, Veit
last_name: Würfel
- first_name: Robert
full_name: Kupfer, Robert
last_name: Kupfer
- first_name: Maik
full_name: Gude, Maik
last_name: Gude
citation:
ama: 'Troschitz J, Gröger B, Würfel V, Kupfer R, Gude M. Joining Processes for Fibre-Reinforced
Thermoplastics: Phenomena and Characterisation. Materials. 2022;15(15).
doi:10.3390/ma15155454'
apa: 'Troschitz, J., Gröger, B., Würfel, V., Kupfer, R., & Gude, M. (2022).
Joining Processes for Fibre-Reinforced Thermoplastics: Phenomena and Characterisation.
Materials, 15(15), Article 5454. https://doi.org/10.3390/ma15155454'
bibtex: '@article{Troschitz_Gröger_Würfel_Kupfer_Gude_2022, title={Joining Processes
for Fibre-Reinforced Thermoplastics: Phenomena and Characterisation}, volume={15},
DOI={10.3390/ma15155454}, number={155454},
journal={Materials}, publisher={MDPI AG}, author={Troschitz, Juliane and Gröger,
Benjamin and Würfel, Veit and Kupfer, Robert and Gude, Maik}, year={2022} }'
chicago: 'Troschitz, Juliane, Benjamin Gröger, Veit Würfel, Robert Kupfer, and Maik
Gude. “Joining Processes for Fibre-Reinforced Thermoplastics: Phenomena and Characterisation.”
Materials 15, no. 15 (2022). https://doi.org/10.3390/ma15155454.'
ieee: 'J. Troschitz, B. Gröger, V. Würfel, R. Kupfer, and M. Gude, “Joining Processes
for Fibre-Reinforced Thermoplastics: Phenomena and Characterisation,” Materials,
vol. 15, no. 15, Art. no. 5454, 2022, doi: 10.3390/ma15155454.'
mla: 'Troschitz, Juliane, et al. “Joining Processes for Fibre-Reinforced Thermoplastics:
Phenomena and Characterisation.” Materials, vol. 15, no. 15, 5454, MDPI
AG, 2022, doi:10.3390/ma15155454.'
short: J. Troschitz, B. Gröger, V. Würfel, R. Kupfer, M. Gude, Materials 15 (2022).
date_created: 2022-12-05T21:51:47Z
date_updated: 2022-12-05T21:54:09Z
doi: 10.3390/ma15155454
intvolume: ' 15'
issue: '15'
language:
- iso: eng
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '131'
name: 'TRR 285 - A: TRR 285 - Project Area A'
- _id: '137'
name: 'TRR 285 – A03: TRR 285 - Subproject A03'
- _id: '133'
name: 'TRR 285 - C: TRR 285 - Project Area C'
- _id: '148'
name: 'TRR 285 – C04: TRR 285 - Subproject C04'
publication: Materials
publication_identifier:
issn:
- 1996-1944
publication_status: published
publisher: MDPI AG
status: public
title: 'Joining Processes for Fibre-Reinforced Thermoplastics: Phenomena and Characterisation'
type: journal_article
user_id: '7850'
volume: 15
year: '2022'
...
---
_id: '34221'
abstract:
- lang: eng
text: Unter dem Begriff der Auflösung wird für gewöhnlich das kleinste messbare
Merkmal eines Messsystems verstanden. In der dimensionellen Computertomografie
hingegen haben sich in den vergangenen Jahren mehrere Auflösungskonzepte etabliert,
die aufgrund der fehlenden Normung zueinander im Kontrast stehen. In diesem Beitrag
werden die drei häufigsten Konzepte, die Voxelgröße, die Ortsauflösung und die
metrologische Strukturauflösung in Kürze vorgestellt. Anschließend wird eine Abgrenzung
zwischen den Konzepten getroffen und ein Integration der bestehenden Konzepte
in ein gemeinsames Amplituden-Wellenlängen Diagramm diskutiert.
author:
- first_name: Felix
full_name: Binder, Felix
last_name: Binder
- first_name: Tino
full_name: Hausotte, Tino
last_name: Hausotte
citation:
ama: Binder F, Hausotte T. Über die Abgrenzung von Auflösungskonzepten in der industriellen
Computertomografie. tm - Technisches Messen. 2022;89(s1):20-24. doi:10.1515/teme-2022-0065
apa: Binder, F., & Hausotte, T. (2022). Über die Abgrenzung von Auflösungskonzepten
in der industriellen Computertomografie. Tm - Technisches Messen, 89(s1),
20–24. https://doi.org/10.1515/teme-2022-0065
bibtex: '@article{Binder_Hausotte_2022, title={Über die Abgrenzung von Auflösungskonzepten
in der industriellen Computertomografie}, volume={89}, DOI={10.1515/teme-2022-0065},
number={s1}, journal={tm - Technisches Messen}, publisher={Walter de Gruyter GmbH},
author={Binder, Felix and Hausotte, Tino}, year={2022}, pages={20–24} }'
chicago: 'Binder, Felix, and Tino Hausotte. “Über Die Abgrenzung von Auflösungskonzepten
in Der Industriellen Computertomografie.” Tm - Technisches Messen 89, no.
s1 (2022): 20–24. https://doi.org/10.1515/teme-2022-0065.'
ieee: 'F. Binder and T. Hausotte, “Über die Abgrenzung von Auflösungskonzepten in
der industriellen Computertomografie,” tm - Technisches Messen, vol. 89,
no. s1, pp. 20–24, 2022, doi: 10.1515/teme-2022-0065.'
mla: Binder, Felix, and Tino Hausotte. “Über Die Abgrenzung von Auflösungskonzepten
in Der Industriellen Computertomografie.” Tm - Technisches Messen, vol.
89, no. s1, Walter de Gruyter GmbH, 2022, pp. 20–24, doi:10.1515/teme-2022-0065.
short: F. Binder, T. Hausotte, Tm - Technisches Messen 89 (2022) 20–24.
date_created: 2022-12-05T21:43:51Z
date_updated: 2022-12-05T21:44:52Z
doi: 10.1515/teme-2022-0065
intvolume: ' 89'
issue: s1
keyword:
- Electrical and Electronic Engineering
- Instrumentation
language:
- iso: eng
page: 20-24
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '133'
name: 'TRR 285 - C: TRR 285 - Project Area C'
- _id: '149'
name: 'TRR 285 – C05: TRR 285 - Subproject C05'
publication: tm - Technisches Messen
publication_identifier:
issn:
- 2196-7113
- 0171-8096
publication_status: published
publisher: Walter de Gruyter GmbH
status: public
title: Über die Abgrenzung von Auflösungskonzepten in der industriellen Computertomografie
type: journal_article
user_id: '7850'
volume: 89
year: '2022'
...
---
_id: '34220'
abstract:
- lang: eng
text: Die Erkennbarkeit von Rissen und geometrischen Qualitätskennwerten von Fügeverbindungen
mittels Computertomografie ist von der Interfacestrukturauflösung abhängig, welche
mittels geeigneter Prüfkörper untersucht wird. Die Reduktion von Abbildungsartefakten
im Bereich von Bauteilzwischenräumen und -oberflächen verbessert deren dimensionelle
Erfassbarkeit.
author:
- first_name: Matthias
full_name: Busch, Matthias
last_name: Busch
- first_name: Lorenz
full_name: Butzhammer, Lorenz
last_name: Butzhammer
- first_name: Tino
full_name: Hausotte, Tino
last_name: Hausotte
citation:
ama: Busch M, Butzhammer L, Hausotte T. Herausforderungen bei computertomografischen
Untersuchungen von Fügeverbindungen. tm - Technisches Messen. 2022;89(s1):83-88.
doi:10.1515/teme-2022-0061
apa: Busch, M., Butzhammer, L., & Hausotte, T. (2022). Herausforderungen bei
computertomografischen Untersuchungen von Fügeverbindungen. Tm - Technisches
Messen, 89(s1), 83–88. https://doi.org/10.1515/teme-2022-0061
bibtex: '@article{Busch_Butzhammer_Hausotte_2022, title={Herausforderungen bei computertomografischen
Untersuchungen von Fügeverbindungen}, volume={89}, DOI={10.1515/teme-2022-0061},
number={s1}, journal={tm - Technisches Messen}, publisher={Walter de Gruyter GmbH},
author={Busch, Matthias and Butzhammer, Lorenz and Hausotte, Tino}, year={2022},
pages={83–88} }'
chicago: 'Busch, Matthias, Lorenz Butzhammer, and Tino Hausotte. “Herausforderungen
Bei Computertomografischen Untersuchungen von Fügeverbindungen.” Tm - Technisches
Messen 89, no. s1 (2022): 83–88. https://doi.org/10.1515/teme-2022-0061.'
ieee: 'M. Busch, L. Butzhammer, and T. Hausotte, “Herausforderungen bei computertomografischen
Untersuchungen von Fügeverbindungen,” tm - Technisches Messen, vol. 89,
no. s1, pp. 83–88, 2022, doi: 10.1515/teme-2022-0061.'
mla: Busch, Matthias, et al. “Herausforderungen Bei Computertomografischen Untersuchungen
von Fügeverbindungen.” Tm - Technisches Messen, vol. 89, no. s1, Walter
de Gruyter GmbH, 2022, pp. 83–88, doi:10.1515/teme-2022-0061.
short: M. Busch, L. Butzhammer, T. Hausotte, Tm - Technisches Messen 89 (2022) 83–88.
date_created: 2022-12-05T21:42:07Z
date_updated: 2022-12-05T21:43:30Z
doi: 10.1515/teme-2022-0061
intvolume: ' 89'
issue: s1
keyword:
- Electrical and Electronic Engineering
- Instrumentation
language:
- iso: eng
page: 83-88
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '133'
name: 'TRR 285 - C: TRR 285 - Project Area C'
- _id: '149'
name: 'TRR 285 – C05: TRR 285 - Subproject C05'
publication: tm - Technisches Messen
publication_identifier:
issn:
- 2196-7113
- 0171-8096
publication_status: published
publisher: Walter de Gruyter GmbH
status: public
title: Herausforderungen bei computertomografischen Untersuchungen von Fügeverbindungen
type: journal_article
user_id: '7850'
volume: 89
year: '2022'
...
---
_id: '33519'
author:
- first_name: Julian
full_name: Marx, Julian
last_name: Marx
- first_name: Jonas
full_name: Rieskamp, Jonas
id: '77643'
last_name: Rieskamp
- first_name: Milad
full_name: Mirbabaie, Milad
id: '88691'
last_name: Mirbabaie
citation:
ama: 'Marx J, Rieskamp J, Mirbabaie M. ‘Just a Normal Day in the Metaverse’ – Distraction
Conflicts of Knowledge Work in Virtual Environments. In: Proceedings of the
33rd Australasian Conference on Information Systems. ; 2022.'
apa: Marx, J., Rieskamp, J., & Mirbabaie, M. (2022). ‘Just a Normal Day in the
Metaverse’ – Distraction Conflicts of Knowledge Work in Virtual Environments.
Proceedings of the 33rd Australasian Conference on Information Systems.
Proceedings of the 33rd Australasian Conference on Information Systems, Melbourne.
bibtex: '@inproceedings{Marx_Rieskamp_Mirbabaie_2022, title={‘Just a Normal Day
in the Metaverse’ – Distraction Conflicts of Knowledge Work in Virtual Environments},
booktitle={Proceedings of the 33rd Australasian Conference on Information Systems},
author={Marx, Julian and Rieskamp, Jonas and Mirbabaie, Milad}, year={2022} }'
chicago: Marx, Julian, Jonas Rieskamp, and Milad Mirbabaie. “‘Just a Normal Day
in the Metaverse’ – Distraction Conflicts of Knowledge Work in Virtual Environments.”
In Proceedings of the 33rd Australasian Conference on Information Systems,
2022.
ieee: J. Marx, J. Rieskamp, and M. Mirbabaie, “‘Just a Normal Day in the Metaverse’
– Distraction Conflicts of Knowledge Work in Virtual Environments,” presented
at the Proceedings of the 33rd Australasian Conference on Information Systems,
Melbourne, 2022.
mla: Marx, Julian, et al. “‘Just a Normal Day in the Metaverse’ – Distraction Conflicts
of Knowledge Work in Virtual Environments.” Proceedings of the 33rd Australasian
Conference on Information Systems, 2022.
short: 'J. Marx, J. Rieskamp, M. Mirbabaie, in: Proceedings of the 33rd Australasian
Conference on Information Systems, 2022.'
conference:
end_date: 2022-12-07
location: Melbourne
name: Proceedings of the 33rd Australasian Conference on Information Systems
start_date: 2022-12-04
date_created: 2022-10-05T08:27:52Z
date_updated: 2022-12-06T10:21:23Z
language:
- iso: eng
main_file_link:
- url: https://www.researchgate.net/publication/365926051_'Just_a_Normal_Day_in_the_Metaverse'_-_Distraction_Conflicts_of_Knowledge_Work_in_Virtual_Environments
publication: Proceedings of the 33rd Australasian Conference on Information Systems
status: public
title: ‘Just a Normal Day in the Metaverse’ – Distraction Conflicts of Knowledge Work
in Virtual Environments
type: conference
user_id: '77643'
year: '2022'
...
---
_id: '34272'
abstract:
- lang: ger
text: Das Ultraschall-Dickdrahtbonden mit Aluminiumdraht ist ein Standardverfahren
zur elektrischenKontaktierung von Leistungshalbleitermodulen. Die steigenden Anforderungen
an die Effizienzund Zuverlässigkeit der Module haben zu technologischen Weiterentwicklungen
geführt und eswerden vermehrt Kupferdrähte mit wesentlich besseren elektrischen
und thermischen Eigenschafteneingesetzt. Hieraus resultieren durch höhere Prozesskräfte
und Ultraschallleistung neueHerausforderungen bei der Prozessentwicklung; hierfür
wird ein Simulationsmodell zur Verbesserungder Prozessentwicklung entwickelt.In
Ultraschall-Drahtbondversuchen mit 400 m Aluminium und Kupfer Drähten wurde der
Einflussder Prozessparameter auf die Bondqualität untersucht; diese Ergebnisse
und zusätzliche Messungender Drahtdeformation und Schwingungen wurden für die
Formulierung der Anforderungenund zur Validierung der Ergebnisse des Simulationsmodells
genutzt.Es wurde ein Prozessmodell, basierend auf einer Co-Simulation zwischen
MATLAB und ANSYS,entwickelt; hierbei wurden die phyiskalischen Phänomene wie die
Ultraschall Werkstoffentfestigung,der Verbindungsaufbau und die dynamischen Systemeigenschaften
abgebildet.Basierend auf einer Zug-Druck-Prüfmaschine wurde ein Prüfstand zur
Identifikation der Modellparameterentwickelt. In zusätzlichen Druckversuchen mit
den Bonddrähten mit und ohneUltraschallanregung wurde die Reduktion der Umformkräfte
unter Ultraschalleinfluss untersucht.Mit dem entwickelten Prozessmodell wurden
die Parameterstudien aus den Ultraschall-Drahtbondversuchensimuliert und direkt
mit den experimentellen Ergebnissen verglichen, wobei sich einerelativ gute Übereinstimmung
zwischen Simulation und Messung sowohl für Aluminium, als auchfür Kupfer, erzielen
ließ.
- lang: eng
text: Ultrasonic heavy wire bonding with aluminium wire is a standard process to
produce electricalcontacts in power semiconductor modules. The increasing demands
on the efficiency and reliabilityof the modules have led to technological developments
and copper wires with significantlybetter electrical and thermal properties are
used more often nowadays. This results in new challengesin process development
due to higher process forces and ultrasonic power; for this purpose,a simulation
model is developed to improve process development.Ultrasonic wire bonding tests
with 400 m aluminium and copper wires were carried out to investigatethe influence
of the process parameters on the bond quality; these results and additionalmeasurements
of wire deformation and vibrations were used to define the requirements for themodel
and validate the results of the simulation.A process model based on a co-simulation
was developed between MATLAB and ANSYS; thephysical phenomena such as ultrasonic
softening of the wire material, bond formation and dynamicbehaviour of the components
were considered.Based on a tensile-compression testing machine, a test rig was
developed to identify the modelparameters. In additional compression tests with
the wires with and without ultrasonic excitation,the reduction of the forming
forces under ultrasonic influence was characterised.With the developed process
model, the parameter studies from the ultrasonic wire bond testswere simulated
and directly compared with the experimental results; a relative good agreementbetween
simulation and measurement could be achieved for both aluminium and copper.
author:
- first_name: Reinhard
full_name: Schemmel, Reinhard
id: '28647'
last_name: Schemmel
citation:
ama: Schemmel R. Enhanced Process Development by Simulation of Ultrasonic Heavy
Wire Bonding. Vol 13. Shaker; 2022. doi:10.17619/UNIPB/1-1280
apa: Schemmel, R. (2022). Enhanced process development by simulation of ultrasonic
heavy wire bonding (Vol. 13). Shaker. https://doi.org/10.17619/UNIPB/1-1280
bibtex: '@book{Schemmel_2022, series={Schriften des Lehrstuhls für Dynamik und Mechatronik},
title={Enhanced process development by simulation of ultrasonic heavy wire bonding},
volume={13}, DOI={10.17619/UNIPB/1-1280},
publisher={Shaker}, author={Schemmel, Reinhard}, year={2022}, collection={Schriften
des Lehrstuhls für Dynamik und Mechatronik} }'
chicago: Schemmel, Reinhard. Enhanced Process Development by Simulation of Ultrasonic
Heavy Wire Bonding. Vol. 13. Schriften Des Lehrstuhls Für Dynamik Und Mechatronik.
Shaker, 2022. https://doi.org/10.17619/UNIPB/1-1280.
ieee: R. Schemmel, Enhanced process development by simulation of ultrasonic heavy
wire bonding, vol. 13. Shaker, 2022.
mla: Schemmel, Reinhard. Enhanced Process Development by Simulation of Ultrasonic
Heavy Wire Bonding. Shaker, 2022, doi:10.17619/UNIPB/1-1280.
short: R. Schemmel, Enhanced Process Development by Simulation of Ultrasonic Heavy
Wire Bonding, Shaker, 2022.
date_created: 2022-12-07T14:03:17Z
date_updated: 2022-12-07T14:15:23Z
department:
- _id: '151'
doi: 10.17619/UNIPB/1-1280
intvolume: ' 13'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://digital.ub.uni-paderborn.de/hs/id/6223291
oa: '1'
page: '174'
publication_identifier:
isbn:
- "\t978-3-8440-8527-3"
publication_status: published
publisher: Shaker
related_material:
link:
- relation: dissertation_contains
url: https://www.shaker.eu/en/content/catalogue/index.asp?lang=en&ID=8&ISBN=978-3-8440-8527-3&search=yes
series_title: Schriften des Lehrstuhls für Dynamik und Mechatronik
status: public
supervisor:
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
title: Enhanced process development by simulation of ultrasonic heavy wire bonding
type: dissertation
user_id: '210'
volume: 13
year: '2022'
...
---
_id: '34316'
abstract:
- lang: ger
text: Eines der Lernziele des Physikstudiums stellt der Erwerb literaler Fähigkeiten
für das Verfassen wissenschaftlicher Arbeiten dar. Die Student:innen werden allerdings
im Rahmen ihres Studiums bisher kaum systematisch beim Erwerb dieser Fähigkeiten
unterstützt. Eine Übungsgelegenheit für das Verfassen von Texten nach wissenschaftlichem
Vorbild stellt das Laborpraktikum dar, in dem die Student:innen zu den absolvierten
Experimenten Laborberichte verfassen. Im Paderborner Physik Praktikum 3P wurden
in den letzten Jahren vier unterschiedliche Unterstützungsangebote für das Erlernen
des wissenschaftlichen Schreibens entwickelt und mittels Zufriedenheitswerten
evaluiert. In dem Beitrag werden die vier Angebote auf inhaltlicher Ebene hinsichtlich
der Lernwirksamkeit mittels einer schriftproduktbasierten Evaluation analysiert.
Durch die vergleichende Analyse können Potenziale und Grenzen der Angebote diskutiert
und Implikationen für die Gestaltung von Unterstützungsangeboten zum Erlernen
des wissenschaftlichen Schreibens in der Physik abgeleitet werden.
article_type: original
author:
- first_name: Anna Brigitte
full_name: Bauer, Anna Brigitte
id: '24755'
last_name: Bauer
orcid: 0000-0002-1742-3099
- first_name: Simon Zacharias
full_name: Lahme, Simon Zacharias
last_name: Lahme
- first_name: Marc
full_name: Sacher, Marc
id: '26883'
last_name: Sacher
citation:
ama: Bauer AB, Lahme SZ, Sacher M. Potenziale und Grenzen von Unterstützungsmaßnahmen
zum wissenschaftlichen Schreiben im Paderborner Physik Praktikum 3P. PhyDid
A - Physik und Didaktik in Schule und Hochschule . 2022;21(1):23-34.
apa: Bauer, A. B., Lahme, S. Z., & Sacher, M. (2022). Potenziale und Grenzen
von Unterstützungsmaßnahmen zum wissenschaftlichen Schreiben im Paderborner Physik
Praktikum 3P. PhyDid A - Physik und Didaktik in Schule und Hochschule ,
21(1), 23–34.
bibtex: '@article{Bauer_Lahme_Sacher_2022, title={Potenziale und Grenzen von Unterstützungsmaßnahmen
zum wissenschaftlichen Schreiben im Paderborner Physik Praktikum 3P}, volume={21},
number={1}, journal={PhyDid A - Physik und Didaktik in Schule und Hochschule },
author={Bauer, Anna Brigitte and Lahme, Simon Zacharias and Sacher, Marc}, year={2022},
pages={23–34} }'
chicago: 'Bauer, Anna Brigitte, Simon Zacharias Lahme, and Marc Sacher. “Potenziale
und Grenzen von Unterstützungsmaßnahmen zum wissenschaftlichen Schreiben im Paderborner
Physik Praktikum 3P.” PhyDid A - Physik und Didaktik in Schule und Hochschule
21, no. 1 (2022): 23–34.'
ieee: A. B. Bauer, S. Z. Lahme, and M. Sacher, “Potenziale und Grenzen von Unterstützungsmaßnahmen
zum wissenschaftlichen Schreiben im Paderborner Physik Praktikum 3P,” PhyDid
A - Physik und Didaktik in Schule und Hochschule , vol. 21, no. 1, pp. 23–34,
2022.
mla: Bauer, Anna Brigitte, et al. “Potenziale und Grenzen von Unterstützungsmaßnahmen
zum wissenschaftlichen Schreiben im Paderborner Physik Praktikum 3P.” PhyDid
A - Physik und Didaktik in Schule und Hochschule , vol. 21, no. 1, 2022, pp.
23–34.
short: A.B. Bauer, S.Z. Lahme, M. Sacher, PhyDid A - Physik und Didaktik in Schule
und Hochschule 21 (2022) 23–34.
date_created: 2022-12-09T15:45:40Z
date_updated: 2022-12-09T15:46:02Z
department:
- _id: '299'
- _id: '576'
- _id: '651'
intvolume: ' 21'
issue: '1'
keyword:
- Laborpraktikum
- Schreiben
language:
- iso: ger
main_file_link:
- open_access: '1'
url: http://phydid.physik.fu-berlin.de/index.php/phydid/article/view/1200
oa: '1'
page: 23-34
publication: 'PhyDid A - Physik und Didaktik in Schule und Hochschule '
publication_identifier:
unknown:
- 1865-5521
publication_status: published
quality_controlled: '1'
status: public
title: Potenziale und Grenzen von Unterstützungsmaßnahmen zum wissenschaftlichen Schreiben
im Paderborner Physik Praktikum 3P
type: journal_article
user_id: '24755'
volume: 21
year: '2022'
...
---
_id: '34300'
abstract:
- lang: eng
text: AbstractThe solvation of ions changes the
physical, chemical and thermodynamic properties of water, and the microscopic
origin of this behaviour is believed to be ion-induced perturbation of water’s
hydrogen-bonding network. Here we provide microscopic insights into this process
by monitoring the dissipation of energy in salt solutions using time-resolved
terahertz–Raman spectroscopy. We resonantly drive the low-frequency rotational
dynamics of water molecules using intense terahertz pulses and probe the Raman
response of their intermolecular translational motions. We find that the intermolecular
rotational-to-translational energy transfer is enhanced by highly charged cations
and is drastically reduced by highly charged anions, scaling with the ion surface
charge density and ion concentration. Our molecular dynamics simulations reveal
that the water–water hydrogen-bond strength between the first and second solvation
shells of cations increases, while it decreases around anions. The opposite effects
of cations and anions on the intermolecular interactions of water resemble the
effects of ions on the stabilization and denaturation of proteins.
author:
- first_name: Vasileios
full_name: Balos, Vasileios
last_name: Balos
- first_name: Naveen Kumar
full_name: Kaliannan, Naveen Kumar
last_name: Kaliannan
- first_name: Hossam
full_name: Elgabarty, Hossam
id: '60250'
last_name: Elgabarty
orcid: 0000-0002-4945-1481
- first_name: Martin
full_name: Wolf, Martin
last_name: Wolf
- first_name: Thomas
full_name: Kühne, Thomas
id: '49079'
last_name: Kühne
- first_name: Mohsen
full_name: Sajadi, Mohsen
last_name: Sajadi
citation:
ama: Balos V, Kaliannan NK, Elgabarty H, Wolf M, Kühne T, Sajadi M. Time-resolved
terahertz–Raman spectroscopy reveals that cations and anions distinctly modify
intermolecular interactions of water. Nature Chemistry. 2022;14(9):1031-1037.
doi:10.1038/s41557-022-00977-2
apa: Balos, V., Kaliannan, N. K., Elgabarty, H., Wolf, M., Kühne, T., & Sajadi,
M. (2022). Time-resolved terahertz–Raman spectroscopy reveals that cations and
anions distinctly modify intermolecular interactions of water. Nature Chemistry,
14(9), 1031–1037. https://doi.org/10.1038/s41557-022-00977-2
bibtex: '@article{Balos_Kaliannan_Elgabarty_Wolf_Kühne_Sajadi_2022, title={Time-resolved
terahertz–Raman spectroscopy reveals that cations and anions distinctly modify
intermolecular interactions of water}, volume={14}, DOI={10.1038/s41557-022-00977-2},
number={9}, journal={Nature Chemistry}, publisher={Springer Science and Business
Media LLC}, author={Balos, Vasileios and Kaliannan, Naveen Kumar and Elgabarty,
Hossam and Wolf, Martin and Kühne, Thomas and Sajadi, Mohsen}, year={2022}, pages={1031–1037}
}'
chicago: 'Balos, Vasileios, Naveen Kumar Kaliannan, Hossam Elgabarty, Martin Wolf,
Thomas Kühne, and Mohsen Sajadi. “Time-Resolved Terahertz–Raman Spectroscopy Reveals
That Cations and Anions Distinctly Modify Intermolecular Interactions of Water.”
Nature Chemistry 14, no. 9 (2022): 1031–37. https://doi.org/10.1038/s41557-022-00977-2.'
ieee: 'V. Balos, N. K. Kaliannan, H. Elgabarty, M. Wolf, T. Kühne, and M. Sajadi,
“Time-resolved terahertz–Raman spectroscopy reveals that cations and anions distinctly
modify intermolecular interactions of water,” Nature Chemistry, vol. 14,
no. 9, pp. 1031–1037, 2022, doi: 10.1038/s41557-022-00977-2.'
mla: Balos, Vasileios, et al. “Time-Resolved Terahertz–Raman Spectroscopy Reveals
That Cations and Anions Distinctly Modify Intermolecular Interactions of Water.”
Nature Chemistry, vol. 14, no. 9, Springer Science and Business Media LLC,
2022, pp. 1031–37, doi:10.1038/s41557-022-00977-2.
short: V. Balos, N.K. Kaliannan, H. Elgabarty, M. Wolf, T. Kühne, M. Sajadi, Nature
Chemistry 14 (2022) 1031–1037.
date_created: 2022-12-09T11:26:57Z
date_updated: 2022-12-09T12:22:40Z
doi: 10.1038/s41557-022-00977-2
intvolume: ' 14'
issue: '9'
keyword:
- General Chemical Engineering
- General Chemistry
language:
- iso: eng
page: 1031-1037
publication: Nature Chemistry
publication_identifier:
issn:
- 1755-4330
- 1755-4349
publication_status: published
publisher: Springer Science and Business Media LLC
status: public
title: Time-resolved terahertz–Raman spectroscopy reveals that cations and anions
distinctly modify intermolecular interactions of water
type: journal_article
user_id: '60250'
volume: 14
year: '2022'
...
---
_id: '34397'
abstract:
- lang: ger
text: "Wie werden technische Systeme zeitgemäß entwickelt, die in Komplexität und
Anspruch alles bisher Dagewesene übertreffen? Darauf gibt Systems Engineering
Antworten. Bisherige Beschreibungen sind für den Maschinenbau aber oft schwer
greifbar und zu unkonkret.\r\n\r\nDieses Buch bricht den internationalen Stand
der Wissenschaft auf das Wesentliche herunter und beschreibt praxisnah die Kernelemente
des Systems Engineering. Eine konkrete Schritt-für-Schritt Anleitung ebnet den
Weg für den erfolgreichen Transfer aus der klassischen Produktentwicklung hin
zum Systems Engineering. Die Inhalte werden grafisch professionell und bewusst
lebendig vermittelt. So wird nicht nur ein fundiertes Systems Engineering-Verständnis
geschaffen, sondern auch die Basis für Kommunikation und Umsetzung im Unternehmen
gelegt."
author:
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: Christian
full_name: Oleff, Christian
id: '41188'
last_name: Oleff
orcid: 0000-0002-0983-1850
citation:
ama: Gräßler I, Oleff C. Systems Engineering - verstehen und industriell umsetzen.
Springer Verlag; 2022.
apa: Gräßler, I., & Oleff, C. (2022). Systems Engineering - verstehen und
industriell umsetzen. Springer Verlag.
bibtex: '@book{Gräßler_Oleff_2022, place={Berlin}, title={Systems Engineering -
verstehen und industriell umsetzen}, publisher={Springer Verlag}, author={Gräßler,
Iris and Oleff, Christian}, year={2022} }'
chicago: 'Gräßler, Iris, and Christian Oleff. Systems Engineering - verstehen
und industriell umsetzen. Berlin: Springer Verlag, 2022.'
ieee: 'I. Gräßler and C. Oleff, Systems Engineering - verstehen und industriell
umsetzen. Berlin: Springer Verlag, 2022.'
mla: Gräßler, Iris, and Christian Oleff. Systems Engineering - verstehen und
industriell umsetzen. Springer Verlag, 2022.
short: I. Gräßler, C. Oleff, Systems Engineering - verstehen und industriell umsetzen,
Springer Verlag, Berlin, 2022.
date_created: 2022-12-12T09:45:02Z
date_updated: 2022-12-12T09:45:54Z
department:
- _id: '152'
language:
- iso: ger
main_file_link:
- url: https://link.springer.com/book/10.1007/978-3-662-64517-8
place: Berlin
publication_identifier:
eisbn:
- 978-3-662-64517-8
isbn:
- 978-3-662-64516-1
publication_status: published
publisher: Springer Verlag
related_material:
link:
- relation: confirmation
url: https://link.springer.com/book/10.1007/978-3-662-64517-8
status: public
title: Systems Engineering - verstehen und industriell umsetzen
type: book
user_id: '52359'
year: '2022'
...
---
_id: '34415'
abstract:
- lang: eng
text: Challenges in the development of resource-efficient lightweight designs, such
as emission and cost targets in production, lead to an increasing demand for environmentally
friendly and fast joining processes. Therefore, cold-forming mechanical joining
techniques provide an energy-efficient alternative in comparison to established
processes, such as spot welding. However, to ensure a sufficient reliability of
the product design, not only the selection of an appropriate manufacturing and
joining method, but also the suitable dimensioning and validation of the entire
joining process is a crucial step. In this context, thermal processes offer a
large number of design principles while mechanical joining methods mainly require
extensive experimental tests and the inclusion of expert knowledge. Although few
contributions already investigated the data-based analysis of mechanical joints,
a system for the requirement- and manufacturing-oriented dimensioning of joining
components, such as different profiles and blanks, in combination with the estimation
of joint properties is not available yet. Motivated by this lack, this contribution
introduces an engineering workbench for the support of design engineers in the
early development phases of the knowledge and data-based design of mechanical
joining connections using clinching as an example. In this regard, the approach
is demonstrated involving a similar material and sheet thickness combination with
static loads.
author:
- first_name: Christoph
full_name: Zirngibl, Christoph
last_name: Zirngibl
- first_name: Christopher
full_name: Sauer, Christopher
last_name: Sauer
- first_name: Benjamin
full_name: Schleich, Benjamin
last_name: Schleich
- first_name: Sandro
full_name: Wartzack, Sandro
last_name: Wartzack
citation:
ama: 'Zirngibl C, Sauer C, Schleich B, Wartzack S. Knowledge and Data-Based Design
and Dimensioning of Mechanical Joining Connections. In: Volume 2: 42nd Computers
and Information in Engineering Conference (CIE). American Society of Mechanical
Engineers; 2022. doi:10.1115/detc2022-89172'
apa: 'Zirngibl, C., Sauer, C., Schleich, B., & Wartzack, S. (2022). Knowledge
and Data-Based Design and Dimensioning of Mechanical Joining Connections. Volume
2: 42nd Computers and Information in Engineering Conference (CIE). https://doi.org/10.1115/detc2022-89172'
bibtex: '@inproceedings{Zirngibl_Sauer_Schleich_Wartzack_2022, title={Knowledge
and Data-Based Design and Dimensioning of Mechanical Joining Connections}, DOI={10.1115/detc2022-89172}, booktitle={Volume
2: 42nd Computers and Information in Engineering Conference (CIE)}, publisher={American
Society of Mechanical Engineers}, author={Zirngibl, Christoph and Sauer, Christopher
and Schleich, Benjamin and Wartzack, Sandro}, year={2022} }'
chicago: 'Zirngibl, Christoph, Christopher Sauer, Benjamin Schleich, and Sandro
Wartzack. “Knowledge and Data-Based Design and Dimensioning of Mechanical Joining
Connections.” In Volume 2: 42nd Computers and Information in Engineering Conference
(CIE). American Society of Mechanical Engineers, 2022. https://doi.org/10.1115/detc2022-89172.'
ieee: 'C. Zirngibl, C. Sauer, B. Schleich, and S. Wartzack, “Knowledge and Data-Based
Design and Dimensioning of Mechanical Joining Connections,” 2022, doi: 10.1115/detc2022-89172.'
mla: 'Zirngibl, Christoph, et al. “Knowledge and Data-Based Design and Dimensioning
of Mechanical Joining Connections.” Volume 2: 42nd Computers and Information
in Engineering Conference (CIE), American Society of Mechanical Engineers,
2022, doi:10.1115/detc2022-89172.'
short: 'C. Zirngibl, C. Sauer, B. Schleich, S. Wartzack, in: Volume 2: 42nd Computers
and Information in Engineering Conference (CIE), American Society of Mechanical
Engineers, 2022.'
date_created: 2022-12-14T12:27:27Z
date_updated: 2022-12-14T12:29:33Z
doi: 10.1115/detc2022-89172
language:
- iso: eng
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '132'
name: 'TRR 285 - B: TRR 285 - Project Area B'
- _id: '144'
name: 'TRR 285 – B05: TRR 285 - Subproject B05'
publication: 'Volume 2: 42nd Computers and Information in Engineering Conference (CIE)'
publication_status: published
publisher: American Society of Mechanical Engineers
status: public
title: Knowledge and Data-Based Design and Dimensioning of Mechanical Joining Connections
type: conference
user_id: '7850'
year: '2022'
...
---
_id: '34417'
abstract:
- lang: eng
text: Given strict emission targets and legal requirements, especially in the automotive
industry, environmentally friendly and simultaneously versatile applicable production
technologies are gaining importance. In this regard, the use of mechanical joining
processes, such as clinching, enable assembly sheet metals to achieve strength
properties similar to those of established thermal joining technologies. However,
to guarantee a high reliability of the generated joint connection, the selection
of a best-fitting joining technology as well as the meaningful description of
individual joint properties is essential. In the context of clinching, few contributions
have to date investigated the metamodel-based estimation and optimization of joint
characteristics, such as neck or interlock thickness, by applying machine learning
and genetic algorithms. Therefore, several regression models have been trained
on varying databases and amounts of input parameters. However, if product engineers
can only provide limited data for a new joining task, such as incomplete information
on applied joining tool dimensions, previously trained metamodels often reach
their limits. This often results in a significant loss of prediction quality and
leads to increasing uncertainties and inaccuracies within the metamodel-based
design of a clinch joint connection. Motivated by this, the presented contribution
investigates different machine learning algorithms regarding their ability to
achieve a satisfying estimation accuracy on limited input data applying a statistically
based feature selection method. Through this, it is possible to identify which
regression models are suitable to predict clinch joint characteristics considering
only a minimum set of required input features. Thus, in addition to the opportunity
to decrease the training effort as well as the model complexity, the subsequent
formulation of design equations can pave the way to a more versatile application
and reuse of pretrained metamodels on varying tool configurations for a given
clinch joining task.
author:
- first_name: Christoph
full_name: Zirngibl, Christoph
last_name: Zirngibl
- first_name: Benjamin
full_name: Schleich, Benjamin
last_name: Schleich
- first_name: Sandro
full_name: Wartzack, Sandro
last_name: Wartzack
citation:
ama: Zirngibl C, Schleich B, Wartzack S. Estimation of Clinch Joint Characteristics
Based on Limited Input Data Using Pre-Trained Metamodels. AI. 2022;3(4):990-1006.
doi:10.3390/ai3040059
apa: Zirngibl, C., Schleich, B., & Wartzack, S. (2022). Estimation of Clinch
Joint Characteristics Based on Limited Input Data Using Pre-Trained Metamodels.
AI, 3(4), 990–1006. https://doi.org/10.3390/ai3040059
bibtex: '@article{Zirngibl_Schleich_Wartzack_2022, title={Estimation of Clinch Joint
Characteristics Based on Limited Input Data Using Pre-Trained Metamodels}, volume={3},
DOI={10.3390/ai3040059}, number={4},
journal={AI}, publisher={MDPI AG}, author={Zirngibl, Christoph and Schleich, Benjamin
and Wartzack, Sandro}, year={2022}, pages={990–1006} }'
chicago: 'Zirngibl, Christoph, Benjamin Schleich, and Sandro Wartzack. “Estimation
of Clinch Joint Characteristics Based on Limited Input Data Using Pre-Trained
Metamodels.” AI 3, no. 4 (2022): 990–1006. https://doi.org/10.3390/ai3040059.'
ieee: 'C. Zirngibl, B. Schleich, and S. Wartzack, “Estimation of Clinch Joint Characteristics
Based on Limited Input Data Using Pre-Trained Metamodels,” AI, vol. 3,
no. 4, pp. 990–1006, 2022, doi: 10.3390/ai3040059.'
mla: Zirngibl, Christoph, et al. “Estimation of Clinch Joint Characteristics Based
on Limited Input Data Using Pre-Trained Metamodels.” AI, vol. 3, no. 4,
MDPI AG, 2022, pp. 990–1006, doi:10.3390/ai3040059.
short: C. Zirngibl, B. Schleich, S. Wartzack, AI 3 (2022) 990–1006.
date_created: 2022-12-14T12:32:29Z
date_updated: 2022-12-14T13:43:53Z
doi: 10.3390/ai3040059
intvolume: ' 3'
issue: '4'
keyword:
- Industrial and Manufacturing Engineering
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.mdpi.com/2673-2688/3/4/59
oa: '1'
page: 990-1006
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '132'
name: 'TRR 285 - B: TRR 285 - Project Area B'
- _id: '144'
name: 'TRR 285 – B05: TRR 285 - Subproject B05'
publication: AI
publication_identifier:
issn:
- 2673-2688
publication_status: published
publisher: MDPI AG
status: public
title: Estimation of Clinch Joint Characteristics Based on Limited Input Data Using
Pre-Trained Metamodels
type: journal_article
user_id: '7850'
volume: 3
year: '2022'
...
---
_id: '33186'
author:
- first_name: Anda-Lisa Martha Josephine Anna
full_name: Harmening, Anda-Lisa Martha Josephine Anna
id: '48437'
last_name: Harmening
citation:
ama: 'Harmening A-LMJA. Das Leben nehmen oder den Tod geben – Selbstbestimmtes Sterben
auf der Schwelle von Utopie zur Realität? In: Sonderausgabe des Jahrbuchs für
internationale Germanistik 2022. ; 2022.'
apa: Harmening, A.-L. M. J. A. (2022). Das Leben nehmen oder den Tod geben – Selbstbestimmtes
Sterben auf der Schwelle von Utopie zur Realität? In Sonderausgabe des Jahrbuchs
für internationale Germanistik 2022.
bibtex: '@inbook{Harmening_2022, title={Das Leben nehmen oder den Tod geben – Selbstbestimmtes
Sterben auf der Schwelle von Utopie zur Realität?}, booktitle={Sonderausgabe des
Jahrbuchs für internationale Germanistik 2022}, author={Harmening, Anda-Lisa Martha
Josephine Anna}, year={2022} }'
chicago: Harmening, Anda-Lisa Martha Josephine Anna. “Das Leben nehmen oder den
Tod geben – Selbstbestimmtes Sterben auf der Schwelle von Utopie zur Realität?”
In Sonderausgabe des Jahrbuchs für internationale Germanistik 2022, 2022.
ieee: A.-L. M. J. A. Harmening, “Das Leben nehmen oder den Tod geben – Selbstbestimmtes
Sterben auf der Schwelle von Utopie zur Realität?,” in Sonderausgabe des Jahrbuchs
für internationale Germanistik 2022, 2022.
mla: Harmening, Anda-Lisa Martha Josephine Anna. “Das Leben nehmen oder den Tod
geben – Selbstbestimmtes Sterben auf der Schwelle von Utopie zur Realität?” Sonderausgabe
des Jahrbuchs für internationale Germanistik 2022, 2022.
short: 'A.-L.M.J.A. Harmening, in: Sonderausgabe des Jahrbuchs für internationale
Germanistik 2022, 2022.'
date_created: 2022-08-26T08:50:26Z
date_updated: 2022-12-15T01:27:12Z
department:
- _id: '5'
- _id: '116'
language:
- iso: ger
publication: Sonderausgabe des Jahrbuchs für internationale Germanistik 2022
status: public
title: Das Leben nehmen oder den Tod geben – Selbstbestimmtes Sterben auf der Schwelle
von Utopie zur Realität?
type: book_chapter
user_id: '49063'
year: '2022'
...
---
_id: '34450'
citation:
ama: Harmening A-LMJA, Leinfellner S, Meier R, eds. Wissenstransfer als Aufgabe,
Herausforderung und Chance kulturwissenschaftlicher Forschung. Vol 1. wbg
Academic; 2022.
apa: Harmening, A.-L. M. J. A., Leinfellner, S., & Meier, R. (Eds.). (2022).
Wissenstransfer als Aufgabe, Herausforderung und Chance kulturwissenschaftlicher
Forschung (Vol. 1). wbg Academic.
bibtex: '@book{Harmening_Leinfellner_Meier_2022, place={Darmstadt}, series={Interdisziplinäre
Studien des Paderborner Graduiertenzentrums für Kulturwissenschaften}, title={Wissenstransfer
als Aufgabe, Herausforderung und Chance kulturwissenschaftlicher Forschung}, volume={1},
publisher={wbg Academic}, year={2022}, collection={Interdisziplinäre Studien des
Paderborner Graduiertenzentrums für Kulturwissenschaften} }'
chicago: 'Harmening, Anda-Lisa Martha Josephine Anna, Stefanie Leinfellner, and
Rebecca Meier, eds. Wissenstransfer als Aufgabe, Herausforderung und Chance
kulturwissenschaftlicher Forschung. Vol. 1. Interdisziplinäre Studien des
Paderborner Graduiertenzentrums für Kulturwissenschaften. Darmstadt: wbg Academic,
2022.'
ieee: 'A.-L. M. J. A. Harmening, S. Leinfellner, and R. Meier, Eds., Wissenstransfer
als Aufgabe, Herausforderung und Chance kulturwissenschaftlicher Forschung,
vol. 1. Darmstadt: wbg Academic, 2022.'
mla: Harmening, Anda-Lisa Martha Josephine Anna, et al., editors. Wissenstransfer
als Aufgabe, Herausforderung und Chance kulturwissenschaftlicher Forschung.
wbg Academic, 2022.
short: A.-L.M.J.A. Harmening, S. Leinfellner, R. Meier, eds., Wissenstransfer als
Aufgabe, Herausforderung und Chance kulturwissenschaftlicher Forschung, wbg Academic,
Darmstadt, 2022.
date_created: 2022-12-15T12:58:56Z
date_updated: 2022-12-15T12:59:03Z
department:
- _id: '116'
editor:
- first_name: Anda-Lisa Martha Josephine Anna
full_name: Harmening, Anda-Lisa Martha Josephine Anna
id: '48437'
last_name: Harmening
- first_name: Stefanie
full_name: Leinfellner, Stefanie
last_name: Leinfellner
- first_name: Rebecca
full_name: Meier, Rebecca
last_name: Meier
intvolume: ' 1'
language:
- iso: ger
page: '352'
place: Darmstadt
publication_identifier:
isbn:
- 978-3-534-27585-4
publication_status: published
publisher: wbg Academic
series_title: Interdisziplinäre Studien des Paderborner Graduiertenzentrums für Kulturwissenschaften
status: public
title: Wissenstransfer als Aufgabe, Herausforderung und Chance kulturwissenschaftlicher
Forschung
type: book_editor
user_id: '14932'
volume: 1
year: '2022'
...
---
_id: '34453'
citation:
ama: 'Tönnies M, Voigts E, The German Society for Contemporary Theatre and Drama
in English, eds. Twenty-First Century Anxieties: Dys/Utopian Spaces and Contexts
in Contemporary British Theatre. Vol 32. Walter deGruyter; 2022.'
apa: 'Tönnies, M., Voigts, E., & The German Society for Contemporary Theatre
and Drama in English (Eds.). (2022). Twenty-First Century Anxieties: Dys/Utopian
Spaces and Contexts in Contemporary British Theatre (Vol. 32). Walter deGruyter.'
bibtex: '@book{Tönnies_Voigts_The German Society for Contemporary Theatre and Drama
in English_2022, place={Berlin}, series={CDE Studies}, title={Twenty-First Century
Anxieties: Dys/Utopian Spaces and Contexts in Contemporary British Theatre}, volume={32},
publisher={Walter deGruyter}, year={2022}, collection={CDE Studies} }'
chicago: 'Tönnies, Merle, Eckart Voigts, and The German Society for Contemporary
Theatre and Drama in English, eds. Twenty-First Century Anxieties: Dys/Utopian
Spaces and Contexts in Contemporary British Theatre. Vol. 32. CDE Studies.
Berlin: Walter deGruyter, 2022.'
ieee: 'M. Tönnies, E. Voigts, and The German Society for Contemporary Theatre and
Drama in English, Eds., Twenty-First Century Anxieties: Dys/Utopian Spaces
and Contexts in Contemporary British Theatre, vol. 32. Berlin: Walter deGruyter,
2022.'
mla: 'Tönnies, Merle, et al., editors. Twenty-First Century Anxieties: Dys/Utopian
Spaces and Contexts in Contemporary British Theatre. Walter deGruyter, 2022.'
short: 'M. Tönnies, E. Voigts, The German Society for Contemporary Theatre and Drama
in English, eds., Twenty-First Century Anxieties: Dys/Utopian Spaces and Contexts
in Contemporary British Theatre, Walter deGruyter, Berlin, 2022.'
corporate_editor:
- The German Society for Contemporary Theatre and Drama in English
date_created: 2022-12-15T14:25:56Z
date_updated: 2022-12-15T14:26:07Z
department:
- _id: '36'
- _id: '1'
- _id: '380'
editor:
- first_name: Merle
full_name: Tönnies, Merle
id: '555'
last_name: Tönnies
- first_name: Eckart
full_name: Voigts, Eckart
last_name: Voigts
intvolume: ' 32'
language:
- iso: eng
place: Berlin
publication_status: published
publisher: Walter deGruyter
series_title: CDE Studies
status: public
title: 'Twenty-First Century Anxieties: Dys/Utopian Spaces and Contexts in Contemporary
British Theatre'
type: book_editor
user_id: '32277'
volume: 32
year: '2022'
...
---
_id: '34452'
author:
- first_name: Merle
full_name: Tönnies, Merle
id: '555'
last_name: Tönnies
- first_name: Christina
full_name: Flotmann-Scholz, Christina
id: '8736'
last_name: Flotmann-Scholz
citation:
ama: 'Tönnies M, Flotmann-Scholz C. Directing Pandemic Attention: Dystopian Corona
Narratives and the Nation in British Media and Politics. Anglistik: International
Journal of English Studies. 2022;33(2):257-272.'
apa: 'Tönnies, M., & Flotmann-Scholz, C. (2022). Directing Pandemic Attention:
Dystopian Corona Narratives and the Nation in British Media and Politics. Anglistik:
International Journal of English Studies, 33(2), 257–272.'
bibtex: '@article{Tönnies_Flotmann-Scholz_2022, title={Directing Pandemic Attention:
Dystopian Corona Narratives and the Nation in British Media and Politics}, volume={33},
number={2}, journal={Anglistik: International Journal of English Studies}, author={Tönnies,
Merle and Flotmann-Scholz, Christina}, year={2022}, pages={257–272} }'
chicago: 'Tönnies, Merle, and Christina Flotmann-Scholz. “Directing Pandemic Attention:
Dystopian Corona Narratives and the Nation in British Media and Politics.” Anglistik:
International Journal of English Studies 33, no. 2 (2022): 257–72.'
ieee: 'M. Tönnies and C. Flotmann-Scholz, “Directing Pandemic Attention: Dystopian
Corona Narratives and the Nation in British Media and Politics,” Anglistik:
International Journal of English Studies, vol. 33, no. 2, pp. 257–272, 2022.'
mla: 'Tönnies, Merle, and Christina Flotmann-Scholz. “Directing Pandemic Attention:
Dystopian Corona Narratives and the Nation in British Media and Politics.” Anglistik:
International Journal of English Studies, vol. 33, no. 2, 2022, pp. 257–72.'
short: 'M. Tönnies, C. Flotmann-Scholz, Anglistik: International Journal of English
Studies 33 (2022) 257–272.'
date_created: 2022-12-15T14:22:20Z
date_updated: 2022-12-15T14:22:25Z
department:
- _id: '36'
- _id: '1'
- _id: '380'
intvolume: ' 33'
issue: '2'
language:
- iso: eng
page: ' 257-272'
publication: 'Anglistik: International Journal of English Studies'
publication_status: published
status: public
title: 'Directing Pandemic Attention: Dystopian Corona Narratives and the Nation in
British Media and Politics'
type: journal_article
user_id: '32277'
volume: 33
year: '2022'
...
---
_id: '34454'
author:
- first_name: Merle
full_name: Tönnies, Merle
id: '555'
last_name: Tönnies
- first_name: Eckart
full_name: Voigts, Eckart
last_name: Voigts
citation:
ama: 'Tönnies M, Voigts E. Anger, Anxiety and Hope: The Complicit Realities and
Engaged/ing Communities of Contemporary Briitsh Dys/Utopian Theatre. Twenty-First
Century Anxieties: Dys/Utopian Spaces and Contexts in Contemporary British Theatre
(CDE Studies). 2022;32.'
apa: 'Tönnies, M., & Voigts, E. (2022). Anger, Anxiety and Hope: The Complicit
Realities and Engaged/ing Communities of Contemporary Briitsh Dys/Utopian Theatre.
Twenty-First Century Anxieties: Dys/Utopian Spaces and Contexts in Contemporary
British Theatre (CDE Studies), 32.'
bibtex: '@article{Tönnies_Voigts_2022, title={Anger, Anxiety and Hope: The Complicit
Realities and Engaged/ing Communities of Contemporary Briitsh Dys/Utopian Theatre},
volume={32}, journal={Twenty-First Century Anxieties: Dys/Utopian Spaces and Contexts
in Contemporary British Theatre (CDE Studies)}, publisher={Walter deGruyter},
author={Tönnies, Merle and Voigts, Eckart}, year={2022} }'
chicago: 'Tönnies, Merle, and Eckart Voigts. “Anger, Anxiety and Hope: The Complicit
Realities and Engaged/Ing Communities of Contemporary Briitsh Dys/Utopian Theatre.”
Twenty-First Century Anxieties: Dys/Utopian Spaces and Contexts in Contemporary
British Theatre (CDE Studies) 32 (2022).'
ieee: 'M. Tönnies and E. Voigts, “Anger, Anxiety and Hope: The Complicit Realities
and Engaged/ing Communities of Contemporary Briitsh Dys/Utopian Theatre,” Twenty-First
Century Anxieties: Dys/Utopian Spaces and Contexts in Contemporary British Theatre
(CDE Studies), vol. 32, 2022.'
mla: 'Tönnies, Merle, and Eckart Voigts. “Anger, Anxiety and Hope: The Complicit
Realities and Engaged/Ing Communities of Contemporary Briitsh Dys/Utopian Theatre.”
Twenty-First Century Anxieties: Dys/Utopian Spaces and Contexts in Contemporary
British Theatre (CDE Studies), vol. 32, Walter deGruyter, 2022.'
short: 'M. Tönnies, E. Voigts, Twenty-First Century Anxieties: Dys/Utopian Spaces
and Contexts in Contemporary British Theatre (CDE Studies) 32 (2022).'
date_created: 2022-12-15T14:29:24Z
date_updated: 2022-12-15T14:29:30Z
department:
- _id: '36'
- _id: '1'
- _id: '380'
intvolume: ' 32'
language:
- iso: eng
publication: 'Twenty-First Century Anxieties: Dys/Utopian Spaces and Contexts in Contemporary
British Theatre (CDE Studies)'
publisher: Walter deGruyter
status: public
title: 'Anger, Anxiety and Hope: The Complicit Realities and Engaged/ing Communities
of Contemporary Briitsh Dys/Utopian Theatre'
type: journal_article
user_id: '32277'
volume: 32
year: '2022'
...
---
_id: '34467'
author:
- first_name: Birgit
full_name: Lütje-Klose , Birgit
last_name: 'Lütje-Klose '
- first_name: Sandra
full_name: Grüter, Sandra
last_name: Grüter
- first_name: Phillip
full_name: Neumann, Phillip
id: '95559'
last_name: Neumann
- first_name: Antonia
full_name: Weber, Antonia
last_name: Weber
- first_name: Janka
full_name: Goldan, Janka
last_name: Goldan
- first_name: Julia
full_name: Gorges, Julia
last_name: Gorges
- first_name: Elke
full_name: Wild, Elke
last_name: Wild
citation:
ama: 'Lütje-Klose B, Grüter S, Neumann P, et al. Weil wir tatsächlich nicht voneinander
wussten, was jeder Einzelne so an verborgenen Schätzen bringt. In: Lutz D, Becker
J, Buchhaupt F, Katzenbach D, Strecker A, Urban M, eds. Qualifizierung für
Inklusion. Sekundarstufe . Vol 3. Qualifizierung der pädagogischen Fachkräfte
für inklusive Bildung. Waxmann; 2022:163-178. doi:10.31244/9783830995142'
apa: Lütje-Klose , B., Grüter, S., Neumann, P., Weber, A., Goldan, J., Gorges, J.,
& Wild, E. (2022). Weil wir tatsächlich nicht voneinander wussten, was jeder
Einzelne so an verborgenen Schätzen bringt. In D. Lutz, J. Becker, F. Buchhaupt,
D. Katzenbach, A. Strecker, & M. Urban (Eds.), Qualifizierung für Inklusion.
Sekundarstufe (Vol. 3, pp. 163–178). Waxmann. https://doi.org/10.31244/9783830995142
bibtex: '@inbook{Lütje-Klose _Grüter_Neumann_Weber_Goldan_Gorges_Wild_2022, place={Münster},
series={Qualifizierung der pädagogischen Fachkräfte für inklusive Bildung}, title={Weil
wir tatsächlich nicht voneinander wussten, was jeder Einzelne so an verborgenen
Schätzen bringt}, volume={3}, DOI={10.31244/9783830995142},
booktitle={Qualifizierung für Inklusion. Sekundarstufe }, publisher={Waxmann},
author={Lütje-Klose , Birgit and Grüter, Sandra and Neumann, Phillip and Weber,
Antonia and Goldan, Janka and Gorges, Julia and Wild, Elke}, editor={Lutz, Deborah
and Becker, Jonas and Buchhaupt, Felix and Katzenbach, Dieter and Strecker, Alicia
and Urban, Michael}, year={2022}, pages={163–178}, collection={Qualifizierung
der pädagogischen Fachkräfte für inklusive Bildung} }'
chicago: 'Lütje-Klose , Birgit, Sandra Grüter, Phillip Neumann, Antonia Weber, Janka
Goldan, Julia Gorges, and Elke Wild. “Weil wir tatsächlich nicht voneinander wussten,
was jeder Einzelne so an verborgenen Schätzen bringt.” In Qualifizierung für
Inklusion. Sekundarstufe , edited by Deborah Lutz, Jonas Becker, Felix Buchhaupt,
Dieter Katzenbach, Alicia Strecker, and Michael Urban, 3:163–78. Qualifizierung
der pädagogischen Fachkräfte für inklusive Bildung. Münster: Waxmann, 2022. https://doi.org/10.31244/9783830995142.'
ieee: 'B. Lütje-Klose et al., “Weil wir tatsächlich nicht voneinander wussten,
was jeder Einzelne so an verborgenen Schätzen bringt,” in Qualifizierung für
Inklusion. Sekundarstufe , vol. 3, D. Lutz, J. Becker, F. Buchhaupt, D. Katzenbach,
A. Strecker, and M. Urban, Eds. Münster: Waxmann, 2022, pp. 163–178.'
mla: Lütje-Klose , Birgit, et al. “Weil wir tatsächlich nicht voneinander wussten,
was jeder Einzelne so an verborgenen Schätzen bringt.” Qualifizierung für Inklusion.
Sekundarstufe , edited by Deborah Lutz et al., vol. 3, Waxmann, 2022, pp.
163–78, doi:10.31244/9783830995142.
short: 'B. Lütje-Klose , S. Grüter, P. Neumann, A. Weber, J. Goldan, J. Gorges,
E. Wild, in: D. Lutz, J. Becker, F. Buchhaupt, D. Katzenbach, A. Strecker, M.
Urban (Eds.), Qualifizierung für Inklusion. Sekundarstufe , Waxmann, Münster,
2022, pp. 163–178.'
date_created: 2022-12-16T14:35:36Z
date_updated: 2022-12-16T14:35:44Z
department:
- _id: '479'
doi: 10.31244/9783830995142
editor:
- first_name: Deborah
full_name: Lutz, Deborah
last_name: Lutz
- first_name: Jonas
full_name: Becker, Jonas
last_name: Becker
- first_name: Felix
full_name: Buchhaupt, Felix
last_name: Buchhaupt
- first_name: Dieter
full_name: Katzenbach, Dieter
last_name: Katzenbach
- first_name: Alicia
full_name: Strecker, Alicia
last_name: Strecker
- first_name: Michael
full_name: Urban, Michael
last_name: Urban
extern: '1'
intvolume: ' 3'
language:
- iso: ger
page: 163-178
place: Münster
publication: 'Qualifizierung für Inklusion. Sekundarstufe '
publication_identifier:
isbn:
- 978-3-8309-4514-7
publication_status: published
publisher: Waxmann
series_title: Qualifizierung der pädagogischen Fachkräfte für inklusive Bildung
status: public
title: Weil wir tatsächlich nicht voneinander wussten, was jeder Einzelne so an verborgenen
Schätzen bringt
type: book_chapter
user_id: '77750'
volume: 3
year: '2022'
...
---
_id: '34465'
author:
- first_name: Huddad
full_name: laeim, Huddad
last_name: laeim
- first_name: Christian
full_name: Schlickriede, Christian
id: '59792'
last_name: Schlickriede
- first_name: Papichaya
full_name: Chaisakul, Papichaya
last_name: Chaisakul
- first_name: Nattaporn
full_name: Chattham, Nattaporn
last_name: Chattham
- first_name: Hathai
full_name: Panitchakan, Hathai
last_name: Panitchakan
- first_name: Krisda
full_name: Siangchaew, Krisda
last_name: Siangchaew
- first_name: Thomas
full_name: Zentgraf, Thomas
id: '30525'
last_name: Zentgraf
orcid: 0000-0002-8662-1101
- first_name: Apichart
full_name: Pattanaporhratana, Apichart
last_name: Pattanaporhratana
citation:
ama: 'laeim H, Schlickriede C, Chaisakul P, et al. Design and investigation of a
metalens for efficiency enhancement of laser-waveguide coupling in a limited space
system. In: Engheta N, Noginov MA, Zheludev NI, eds. Metamaterials, Metadevices,
and Metasystems 2022. SPIE; 2022. doi:10.1117/12.2629789'
apa: laeim, H., Schlickriede, C., Chaisakul, P., Chattham, N., Panitchakan, H.,
Siangchaew, K., Zentgraf, T., & Pattanaporhratana, A. (2022). Design and investigation
of a metalens for efficiency enhancement of laser-waveguide coupling in a limited
space system. In N. Engheta, M. A. Noginov, & N. I. Zheludev (Eds.), Metamaterials,
Metadevices, and Metasystems 2022. SPIE. https://doi.org/10.1117/12.2629789
bibtex: '@inproceedings{laeim_Schlickriede_Chaisakul_Chattham_Panitchakan_Siangchaew_Zentgraf_Pattanaporhratana_2022,
title={Design and investigation of a metalens for efficiency enhancement of laser-waveguide
coupling in a limited space system}, DOI={10.1117/12.2629789},
booktitle={Metamaterials, Metadevices, and Metasystems 2022}, publisher={SPIE},
author={laeim, Huddad and Schlickriede, Christian and Chaisakul, Papichaya and
Chattham, Nattaporn and Panitchakan, Hathai and Siangchaew, Krisda and Zentgraf,
Thomas and Pattanaporhratana, Apichart}, editor={Engheta, Nader and Noginov, Mikhail
A. and Zheludev, Nikolay I.}, year={2022} }'
chicago: laeim, Huddad, Christian Schlickriede, Papichaya Chaisakul, Nattaporn Chattham,
Hathai Panitchakan, Krisda Siangchaew, Thomas Zentgraf, and Apichart Pattanaporhratana.
“Design and Investigation of a Metalens for Efficiency Enhancement of Laser-Waveguide
Coupling in a Limited Space System.” In Metamaterials, Metadevices, and Metasystems
2022, edited by Nader Engheta, Mikhail A. Noginov, and Nikolay I. Zheludev.
SPIE, 2022. https://doi.org/10.1117/12.2629789.
ieee: 'H. laeim et al., “Design and investigation of a metalens for efficiency
enhancement of laser-waveguide coupling in a limited space system,” in Metamaterials,
Metadevices, and Metasystems 2022, 2022, doi: 10.1117/12.2629789.'
mla: laeim, Huddad, et al. “Design and Investigation of a Metalens for Efficiency
Enhancement of Laser-Waveguide Coupling in a Limited Space System.” Metamaterials,
Metadevices, and Metasystems 2022, edited by Nader Engheta et al., SPIE, 2022,
doi:10.1117/12.2629789.
short: 'H. laeim, C. Schlickriede, P. Chaisakul, N. Chattham, H. Panitchakan, K.
Siangchaew, T. Zentgraf, A. Pattanaporhratana, in: N. Engheta, M.A. Noginov, N.I.
Zheludev (Eds.), Metamaterials, Metadevices, and Metasystems 2022, SPIE, 2022.'
date_created: 2022-12-16T12:28:40Z
date_updated: 2022-12-16T12:30:17Z
department:
- _id: '15'
- _id: '230'
- _id: '289'
- _id: '623'
doi: 10.1117/12.2629789
editor:
- first_name: Nader
full_name: Engheta, Nader
last_name: Engheta
- first_name: Mikhail A.
full_name: Noginov, Mikhail A.
last_name: Noginov
- first_name: Nikolay I.
full_name: Zheludev, Nikolay I.
last_name: Zheludev
language:
- iso: eng
publication: Metamaterials, Metadevices, and Metasystems 2022
publication_status: published
publisher: SPIE
status: public
title: Design and investigation of a metalens for efficiency enhancement of laser-waveguide
coupling in a limited space system
type: conference
user_id: '30525'
year: '2022'
...
---
_id: '32578'
abstract:
- lang: eng
text: |-
Abstract
Background
The outcome after ACL reconstruction (ACLR) is in general disappointing with unacceptable number of athletes that do not return to pre-injury level of sports, high re-injury rates, early development of osteoarthritis and shorter careers. Athletes after ACLR have high expectation to return to sports which is in contrast with the current outcomes. The aim of this manuscript is to present an overview of factors that are needed to be incorporated and to personalize the rehabilitation process for an athlete who has undergone an ACLR.
Level of evidence
4.
article_number: '73'
author:
- first_name: Alli
full_name: Gokeler, Alli
last_name: Gokeler
- first_name: Alberto
full_name: Grassi, Alberto
last_name: Grassi
- first_name: Roy
full_name: Hoogeslag, Roy
last_name: Hoogeslag
- first_name: Albert
full_name: van Houten, Albert
last_name: van Houten
- first_name: Caroline
full_name: Bolling, Caroline
last_name: Bolling
- first_name: Matthew
full_name: Buckthorpe, Matthew
last_name: Buckthorpe
- first_name: Grant
full_name: Norte, Grant
last_name: Norte
- first_name: Anne
full_name: Benjaminse, Anne
last_name: Benjaminse
- first_name: Pieter
full_name: Heuvelmans, Pieter
last_name: Heuvelmans
- first_name: Stefano
full_name: Di Paolo, Stefano
last_name: Di Paolo
- first_name: Igor
full_name: Tak, Igor
last_name: Tak
- first_name: Francesco Della
full_name: Villa, Francesco Della
last_name: Villa
citation:
ama: 'Gokeler A, Grassi A, Hoogeslag R, et al. Return to sports after ACL injury
5 years from now: 10 things we must do. Journal of Experimental Orthopaedics.
2022;9(1). doi:10.1186/s40634-022-00514-7'
apa: 'Gokeler, A., Grassi, A., Hoogeslag, R., van Houten, A., Bolling, C., Buckthorpe,
M., Norte, G., Benjaminse, A., Heuvelmans, P., Di Paolo, S., Tak, I., & Villa,
F. D. (2022). Return to sports after ACL injury 5 years from now: 10 things we
must do. Journal of Experimental Orthopaedics, 9(1), Article 73.
https://doi.org/10.1186/s40634-022-00514-7'
bibtex: '@article{Gokeler_Grassi_Hoogeslag_van Houten_Bolling_Buckthorpe_Norte_Benjaminse_Heuvelmans_Di
Paolo_et al._2022, title={Return to sports after ACL injury 5 years from now:
10 things we must do}, volume={9}, DOI={10.1186/s40634-022-00514-7},
number={173}, journal={Journal of Experimental Orthopaedics}, publisher={Springer
Science and Business Media LLC}, author={Gokeler, Alli and Grassi, Alberto and
Hoogeslag, Roy and van Houten, Albert and Bolling, Caroline and Buckthorpe, Matthew
and Norte, Grant and Benjaminse, Anne and Heuvelmans, Pieter and Di Paolo, Stefano
and et al.}, year={2022} }'
chicago: 'Gokeler, Alli, Alberto Grassi, Roy Hoogeslag, Albert van Houten, Caroline
Bolling, Matthew Buckthorpe, Grant Norte, et al. “Return to Sports after ACL Injury
5 Years from Now: 10 Things We Must Do.” Journal of Experimental Orthopaedics
9, no. 1 (2022). https://doi.org/10.1186/s40634-022-00514-7.'
ieee: 'A. Gokeler et al., “Return to sports after ACL injury 5 years from
now: 10 things we must do,” Journal of Experimental Orthopaedics, vol.
9, no. 1, Art. no. 73, 2022, doi: 10.1186/s40634-022-00514-7.'
mla: 'Gokeler, Alli, et al. “Return to Sports after ACL Injury 5 Years from Now:
10 Things We Must Do.” Journal of Experimental Orthopaedics, vol. 9, no.
1, 73, Springer Science and Business Media LLC, 2022, doi:10.1186/s40634-022-00514-7.'
short: A. Gokeler, A. Grassi, R. Hoogeslag, A. van Houten, C. Bolling, M. Buckthorpe,
G. Norte, A. Benjaminse, P. Heuvelmans, S. Di Paolo, I. Tak, F.D. Villa, Journal
of Experimental Orthopaedics 9 (2022).
date_created: 2022-08-04T09:32:15Z
date_updated: 2022-12-16T15:44:33Z
department:
- _id: '17'
doi: 10.1186/s40634-022-00514-7
intvolume: ' 9'
issue: '1'
keyword:
- Orthopedics and Sports Medicine
language:
- iso: eng
publication: Journal of Experimental Orthopaedics
publication_identifier:
issn:
- 2197-1153
publication_status: published
publisher: Springer Science and Business Media LLC
status: public
title: 'Return to sports after ACL injury 5 years from now: 10 things we must do'
type: journal_article
user_id: '46'
volume: 9
year: '2022'
...
---
_id: '32361'
article_number: '102250'
article_type: original
author:
- first_name: Hans-Erik
full_name: Scharfen, Hans-Erik
last_name: Scharfen
- first_name: Tim
full_name: Lehmann, Tim
id: '41584'
last_name: Lehmann
- first_name: Daniel
full_name: Büchel, Daniel
id: '41088'
last_name: Büchel
- first_name: Jochen
full_name: Baumeister, Jochen
id: '46'
last_name: Baumeister
orcid: 0000-0003-2683-5826
citation:
ama: Scharfen H-E, Lehmann T, Büchel D, Baumeister J. Cortical responses to sport-specific
stimuli in a standing stop signal task. Psychology of Sport and Exercise.
Published online 2022. doi:10.1016/j.psychsport.2022.102250
apa: Scharfen, H.-E., Lehmann, T., Büchel, D., & Baumeister, J. (2022). Cortical
responses to sport-specific stimuli in a standing stop signal task. Psychology
of Sport and Exercise, Article 102250. https://doi.org/10.1016/j.psychsport.2022.102250
bibtex: '@article{Scharfen_Lehmann_Büchel_Baumeister_2022, title={Cortical responses
to sport-specific stimuli in a standing stop signal task}, DOI={10.1016/j.psychsport.2022.102250},
number={102250}, journal={Psychology of Sport and Exercise}, publisher={Elsevier
BV}, author={Scharfen, Hans-Erik and Lehmann, Tim and Büchel, Daniel and Baumeister,
Jochen}, year={2022} }'
chicago: Scharfen, Hans-Erik, Tim Lehmann, Daniel Büchel, and Jochen Baumeister.
“Cortical Responses to Sport-Specific Stimuli in a Standing Stop Signal Task.”
Psychology of Sport and Exercise, 2022. https://doi.org/10.1016/j.psychsport.2022.102250.
ieee: 'H.-E. Scharfen, T. Lehmann, D. Büchel, and J. Baumeister, “Cortical responses
to sport-specific stimuli in a standing stop signal task,” Psychology of Sport
and Exercise, Art. no. 102250, 2022, doi: 10.1016/j.psychsport.2022.102250.'
mla: Scharfen, Hans-Erik, et al. “Cortical Responses to Sport-Specific Stimuli in
a Standing Stop Signal Task.” Psychology of Sport and Exercise, 102250,
Elsevier BV, 2022, doi:10.1016/j.psychsport.2022.102250.
short: H.-E. Scharfen, T. Lehmann, D. Büchel, J. Baumeister, Psychology of Sport
and Exercise (2022).
date_created: 2022-07-14T06:47:42Z
date_updated: 2022-12-16T15:44:23Z
department:
- _id: '172'
doi: 10.1016/j.psychsport.2022.102250
keyword:
- Applied Psychology
language:
- iso: eng
publication: Psychology of Sport and Exercise
publication_identifier:
issn:
- 1469-0292
publication_status: published
publisher: Elsevier BV
status: public
title: Cortical responses to sport-specific stimuli in a standing stop signal task
type: journal_article
user_id: '46'
year: '2022'
...