[{"abstract":[{"lang":"eng","text":"Previous research in proof-carrying hardware has established the feasibility and utility of the approach, and provided a concrete solution for employing it for the certification of functional equivalence checking against a specification, but fell short in connecting it to state-of-the-art formal verification insights, methods and tools. Due to the immense complexity of modern circuits, and verification challenges such as the state explosion problem for sequential circuits, this restriction of readily-available verification solutions severely limited the applicability of the approach in wider contexts.\r\n\r\nThis thesis closes the gap between the PCH approach and current advances in formal hardware verification, provides methods and tools to express and certify a wide range of circuit properties, both functional and non-functional, and presents for the first time prototypes in which circuits that are implemented on actual reconfigurable hardware are verified with PCH methods. Using these results, designers can now apply PCH to establish trust in more complex circuits, by using more diverse properties which they can express using modern, efficient property specification techniques."},{"lang":"ger","text":"Die bisherige Forschung zu Proof-Carrying Hardware (PCH) hat dessen Machbarkeit und Nützlichkeit gezeigt und einen Ansatz zur Zertifizierung der funktionalen Äquivalenz zu einer Spezifikation geliefert, jedoch ohne PCH mit aktuellen Erkenntnissen, Methoden oder Werkzeugen formaler Hardwareverifikation zu verknüpfen. Aufgrund der Komplexität moderner Schaltungen und Verifikationsherausforderungen wie der Zustandsexplosion bei sequentiellen Schaltungen, limitiert diese Einschränkung sofort verfügbarer Verifikationslösungen die Anwendbarkeit des Ansatzes in einem größeren Kontext signifikant.\r\n\r\nDiese Dissertation schließt die Lücke zwischen PCH und modernen Entwicklungen in der Schaltungsverifikation und stellt Methoden und Werkzeuge zur Verfügung, welche die Zertifizierung einer großen Bandbreite von Schaltungseigenschaften ermöglicht; sowohl funktionale, als auch nicht-funktionale. Überdies werden erstmals Prototypen vorgestellt in welchen Schaltungen mittels PCH verifiziert werden, die auf tatsächlicher rekonfigurierbarer Hardware realisiert sind. Dank dieser Ergebnisse können Entwickler PCH zur Herstellung von Vertrauen in weit komplexere Schaltungen verwenden, unter Zuhilfenahme einer größeren Vielfalt von Eigenschaften, welche durch moderne, effiziente Spezifikationstechniken ausgedrückt werden können."}],"date_created":"2021-10-25T06:35:41Z","keyword":["Proof-Carrying Hardware","Formal Verification","Sequential Circuits","Non-Functional Properties","Functional Properties"],"type":"dissertation","department":[{"_id":"78"}],"title":"Guaranteeing Properties of Reconfigurable Hardware Circuits with Proof-Carrying Hardware","year":"2021","author":[{"id":"3118","full_name":"Wiersema, Tobias","last_name":"Wiersema","first_name":"Tobias"}],"date_updated":"2022-01-06T06:57:26Z","publication_status":"published","main_file_link":[{"open_access":"1","url":"https://nbn-resolving.de/urn:nbn:de:hbz:466:2-39800"}],"language":[{"iso":"eng"}],"supervisor":[{"last_name":"Platzner","first_name":"Marco","full_name":"Platzner, Marco","id":"398"}],"citation":{"bibtex":"@book{Wiersema_2021, place={Paderborn}, title={Guaranteeing Properties of Reconfigurable Hardware Circuits with Proof-Carrying Hardware}, publisher={Paderborn University}, author={Wiersema, Tobias}, year={2021} }","ama":"Wiersema T. <i>Guaranteeing Properties of Reconfigurable Hardware Circuits with Proof-Carrying Hardware</i>. Paderborn University; 2021.","mla":"Wiersema, Tobias. <i>Guaranteeing Properties of Reconfigurable Hardware Circuits with Proof-Carrying Hardware</i>. Paderborn University, 2021.","short":"T. Wiersema, Guaranteeing Properties of Reconfigurable Hardware Circuits with Proof-Carrying Hardware, Paderborn University, Paderborn, 2021.","chicago":"Wiersema, Tobias. <i>Guaranteeing Properties of Reconfigurable Hardware Circuits with Proof-Carrying Hardware</i>. Paderborn: Paderborn University, 2021.","ieee":"T. Wiersema, <i>Guaranteeing Properties of Reconfigurable Hardware Circuits with Proof-Carrying Hardware</i>. Paderborn: Paderborn University, 2021.","apa":"Wiersema, T. (2021). <i>Guaranteeing Properties of Reconfigurable Hardware Circuits with Proof-Carrying Hardware</i>. Paderborn University."},"project":[{"name":"SFB 901","_id":"1"},{"_id":"3","name":"SFB 901 - Project Area B"},{"_id":"12","name":"SFB 901 - Subproject B4"}],"place":"Paderborn","oa":"1","status":"public","page":"293","_id":"26746","publisher":"Paderborn University","ddc":["006"],"user_id":"3118"},{"author":[{"full_name":"Garcia Diosa, Jaime Andres","first_name":"Jaime Andres","last_name":"Garcia Diosa"},{"first_name":"Alejandro","last_name":"Gonzalez Orive","full_name":"Gonzalez Orive, Alejandro"},{"id":"194","first_name":"Guido","last_name":"Grundmeier","full_name":"Grundmeier, Guido"},{"full_name":"Camargo Amado, Ruben Jesus","first_name":"Ruben Jesus","last_name":"Camargo Amado"},{"id":"48864","first_name":"Adrian","orcid":"0000-0001-7139-3110","last_name":"Keller","full_name":"Keller, Adrian"}],"publication_identifier":{"issn":["2076-3417"]},"title":"Morphological Dynamics of Leukemia Cells on TiO2 Nanoparticle Coatings Studied by AFM","status":"public","year":"2021","intvolume":"        11","publication_status":"published","date_updated":"2022-01-06T06:57:27Z","_id":"26759","language":[{"iso":"eng"}],"page":"9898","volume":11,"user_id":"48864","doi":"10.3390/app11219898","citation":{"short":"J.A. Garcia Diosa, A. Gonzalez Orive, G. Grundmeier, R.J. Camargo Amado, A. Keller, Applied Sciences 11 (2021) 9898.","ama":"Garcia Diosa JA, Gonzalez Orive A, Grundmeier G, Camargo Amado RJ, Keller A. Morphological Dynamics of Leukemia Cells on TiO2 Nanoparticle Coatings Studied by AFM. <i>Applied Sciences</i>. 2021;11:9898. doi:<a href=\"https://doi.org/10.3390/app11219898\">10.3390/app11219898</a>","chicago":"Garcia Diosa, Jaime Andres, Alejandro Gonzalez Orive, Guido Grundmeier, Ruben Jesus Camargo Amado, and Adrian Keller. “Morphological Dynamics of Leukemia Cells on TiO2 Nanoparticle Coatings Studied by AFM.” <i>Applied Sciences</i> 11 (2021): 9898. <a href=\"https://doi.org/10.3390/app11219898\">https://doi.org/10.3390/app11219898</a>.","bibtex":"@article{Garcia Diosa_Gonzalez Orive_Grundmeier_Camargo Amado_Keller_2021, title={Morphological Dynamics of Leukemia Cells on TiO2 Nanoparticle Coatings Studied by AFM}, volume={11}, DOI={<a href=\"https://doi.org/10.3390/app11219898\">10.3390/app11219898</a>}, journal={Applied Sciences}, author={Garcia Diosa, Jaime Andres and Gonzalez Orive, Alejandro and Grundmeier, Guido and Camargo Amado, Ruben Jesus and Keller, Adrian}, year={2021}, pages={9898} }","apa":"Garcia Diosa, J. A., Gonzalez Orive, A., Grundmeier, G., Camargo Amado, R. J., &#38; Keller, A. (2021). Morphological Dynamics of Leukemia Cells on TiO2 Nanoparticle Coatings Studied by AFM. <i>Applied Sciences</i>, <i>11</i>, 9898. <a href=\"https://doi.org/10.3390/app11219898\">https://doi.org/10.3390/app11219898</a>","mla":"Garcia Diosa, Jaime Andres, et al. “Morphological Dynamics of Leukemia Cells on TiO2 Nanoparticle Coatings Studied by AFM.” <i>Applied Sciences</i>, vol. 11, 2021, p. 9898, doi:<a href=\"https://doi.org/10.3390/app11219898\">10.3390/app11219898</a>.","ieee":"J. A. Garcia Diosa, A. Gonzalez Orive, G. Grundmeier, R. J. Camargo Amado, and A. Keller, “Morphological Dynamics of Leukemia Cells on TiO2 Nanoparticle Coatings Studied by AFM,” <i>Applied Sciences</i>, vol. 11, p. 9898, 2021, doi: <a href=\"https://doi.org/10.3390/app11219898\">10.3390/app11219898</a>."},"publication":"Applied Sciences","abstract":[{"lang":"eng","text":"<jats:p>Coatings of modified TiO2 nanoparticles (TiO2-m) have been shown to effectively and selectively trap non-adherent cancer cells, with an enormous potential for applications in photodynamic therapy (PDT). Leukemia cells have a remarkable affinity for TiO2-m coatings, adhering to the surface by membrane structures and exhibiting morphologic characteristics of amoeboid locomotion. However, the details of the cell–substrate interaction induced by the TiO2-m coating remain elusive. With the aim to obtain a better understanding of this phenomenon, leukemia cell adhesion to such coatings was characterized by atomic force microscopy (AFM) for short contact times up to 60 min. The cell and membrane morphological parameters mean cell height, contact area, cell volume, and membrane roughness were determined at different contact times. These results reveal cell expansion and contraction phases occurring during the initial stage of adhesion. Subsequently, the leukemic cells reach what appears to be a new resting state, characterized by pinning of the cell membrane by TiO2-m nanoparticle aggregates protruding from the coating surface.</jats:p>"}],"date_created":"2021-10-25T07:48:17Z","department":[{"_id":"302"}],"type":"journal_article"},{"conference":{"name":"31st CIRP Design Conference","start_date":"2021-05-19","end_date":"2021-05-21"},"author":[{"full_name":"Kharatyan, Aschot","first_name":"Aschot","last_name":"Kharatyan"},{"full_name":"Jürgenhake, Christoph","last_name":"Jürgenhake","first_name":"Christoph"},{"first_name":"Roman","last_name":"Dumitrescu","full_name":"Dumitrescu, Roman","id":"16190"}],"year":"2021","status":"public","title":"Towards generative design in the development of mechatronic integrated devices (MID)","date_updated":"2022-01-06T06:57:29Z","publication_status":"published","_id":"26823","language":[{"iso":"eng"}],"page":"373-378","volume":"Vol. 100","user_id":"15782","citation":{"short":"A. Kharatyan, C. Jürgenhake, R. Dumitrescu, in: Procedia CIRP, 2021, pp. 373–378.","chicago":"Kharatyan, Aschot, Christoph Jürgenhake, and Roman Dumitrescu. “Towards Generative Design in the Development of Mechatronic Integrated Devices (MID).” In <i>Procedia CIRP</i>, Vol. 100:373–78, 2021.","ieee":"A. Kharatyan, C. Jürgenhake, and R. Dumitrescu, “Towards generative design in the development of mechatronic integrated devices (MID),” in <i>Procedia CIRP</i>, 2021, vol. Vol. 100, pp. 373–378.","apa":"Kharatyan, A., Jürgenhake, C., &#38; Dumitrescu, R. (2021). Towards generative design in the development of mechatronic integrated devices (MID). <i>Procedia CIRP</i>, <i>Vol. 100</i>, 373–378.","bibtex":"@inproceedings{Kharatyan_Jürgenhake_Dumitrescu_2021, title={Towards generative design in the development of mechatronic integrated devices (MID)}, volume={Vol. 100}, booktitle={Procedia CIRP}, author={Kharatyan, Aschot and Jürgenhake, Christoph and Dumitrescu, Roman}, year={2021}, pages={373–378} }","ama":"Kharatyan A, Jürgenhake C, Dumitrescu R. Towards generative design in the development of mechatronic integrated devices (MID). In: <i>Procedia CIRP</i>. Vol Vol. 100. ; 2021:373-378.","mla":"Kharatyan, Aschot, et al. “Towards Generative Design in the Development of Mechatronic Integrated Devices (MID).” <i>Procedia CIRP</i>, vol. Vol. 100, 2021, pp. 373–78."},"publication":"Procedia CIRP","date_created":"2021-10-25T12:18:36Z","department":[{"_id":"563"}],"type":"conference"},{"conference":{"start_date":"2021-02-9","name":"International Congress Molded Interconnect Devices (MID)","location":"Amberg","end_date":"2021-02-10"},"author":[{"full_name":"Mager, Thomas","last_name":"Mager","first_name":"Thomas"},{"first_name":"Christoph","last_name":"Jürgenhake","full_name":"Jürgenhake, Christoph"},{"full_name":"Dumitrescu, Roman","last_name":"Dumitrescu","first_name":"Roman","id":"16190"}],"status":"public","year":"2021","title":"Approach for a modular design methodology for an efficient development of 3D MID components","date_updated":"2022-01-06T06:57:29Z","publication_status":"published","_id":"26830","language":[{"iso":"eng"}],"page":"1-9","user_id":"15782","citation":{"chicago":"Mager, Thomas, Christoph Jürgenhake, and Roman Dumitrescu. “Approach for a Modular Design Methodology for an Efficient Development of 3D MID Components.” In <i>14th International Congress Molded Interconnect Devices (MID)</i>, 1–9, 2021.","short":"T. Mager, C. Jürgenhake, R. Dumitrescu, in: 14th International Congress Molded Interconnect Devices (MID), 2021, pp. 1–9.","ieee":"T. Mager, C. Jürgenhake, and R. Dumitrescu, “Approach for a modular design methodology for an efficient development of 3D MID components,” in <i>14th International Congress Molded Interconnect Devices (MID)</i>, Amberg, 2021, pp. 1–9.","apa":"Mager, T., Jürgenhake, C., &#38; Dumitrescu, R. (2021). Approach for a modular design methodology for an efficient development of 3D MID components. <i>14th International Congress Molded Interconnect Devices (MID)</i>, 1–9.","bibtex":"@inproceedings{Mager_Jürgenhake_Dumitrescu_2021, title={Approach for a modular design methodology for an efficient development of 3D MID components}, booktitle={14th International Congress Molded Interconnect Devices (MID)}, author={Mager, Thomas and Jürgenhake, Christoph and Dumitrescu, Roman}, year={2021}, pages={1–9} }","ama":"Mager T, Jürgenhake C, Dumitrescu R. Approach for a modular design methodology for an efficient development of 3D MID components. In: <i>14th International Congress Molded Interconnect Devices (MID)</i>. ; 2021:1-9.","mla":"Mager, Thomas, et al. “Approach for a Modular Design Methodology for an Efficient Development of 3D MID Components.” <i>14th International Congress Molded Interconnect Devices (MID)</i>, 2021, pp. 1–9."},"publication":"14th International Congress Molded Interconnect Devices (MID)","date_created":"2021-10-25T12:24:20Z","department":[{"_id":"563"}],"type":"conference"},{"department":[{"_id":"563"}],"type":"conference","date_created":"2021-10-25T12:27:28Z","citation":{"apa":"Hemmelgarn, F., Ehlert, P., Mager, T., Jürgenhake, C., &#38; Dumitrescu, R. (2021). Evaluation of different additive manufacturing technologies for MIDs in the context of smart sensor systems for retrofit applications. <i>14th International Congress Molded Interconnect Devices (MID)</i>. International Congress Molded Interconnect Devices (MID), Amberg.","ieee":"F. Hemmelgarn, P. Ehlert, T. Mager, C. Jürgenhake, and R. Dumitrescu, “Evaluation of different additive manufacturing technologies for MIDs in the context of smart sensor systems for retrofit applications,” presented at the International Congress Molded Interconnect Devices (MID), Amberg, 2021.","short":"F. Hemmelgarn, P. Ehlert, T. Mager, C. Jürgenhake, R. Dumitrescu, in: 14th International Congress Molded Interconnect Devices (MID), 2021.","chicago":"Hemmelgarn, Florian, Patrick Ehlert, Thomas Mager, Christoph Jürgenhake, and Roman Dumitrescu. “Evaluation of Different Additive Manufacturing Technologies for MIDs in the Context of Smart Sensor Systems for Retrofit Applications.” In <i>14th International Congress Molded Interconnect Devices (MID)</i>, 2021.","mla":"Hemmelgarn, Florian, et al. “Evaluation of Different Additive Manufacturing Technologies for MIDs in the Context of Smart Sensor Systems for Retrofit Applications.” <i>14th International Congress Molded Interconnect Devices (MID)</i>, 2021.","ama":"Hemmelgarn F, Ehlert P, Mager T, Jürgenhake C, Dumitrescu R. Evaluation of different additive manufacturing technologies for MIDs in the context of smart sensor systems for retrofit applications. In: <i>14th International Congress Molded Interconnect Devices (MID)</i>. ; 2021.","bibtex":"@inproceedings{Hemmelgarn_Ehlert_Mager_Jürgenhake_Dumitrescu_2021, title={Evaluation of different additive manufacturing technologies for MIDs in the context of smart sensor systems for retrofit applications}, booktitle={14th International Congress Molded Interconnect Devices (MID)}, author={Hemmelgarn, Florian and Ehlert, Patrick and Mager, Thomas and Jürgenhake, Christoph and Dumitrescu, Roman}, year={2021} }"},"publication":"14th International Congress Molded Interconnect Devices (MID)","user_id":"15782","language":[{"iso":"eng"}],"_id":"26833","date_updated":"2022-01-06T06:57:29Z","publication_status":"published","conference":{"location":"Amberg","start_date":"2021-02-9","name":"International Congress Molded Interconnect Devices (MID)","end_date":"2021-02-10"},"author":[{"full_name":"Hemmelgarn, Florian","first_name":"Florian","last_name":"Hemmelgarn"},{"full_name":"Ehlert, Patrick","first_name":"Patrick","last_name":"Ehlert"},{"last_name":"Mager","first_name":"Thomas","full_name":"Mager, Thomas"},{"full_name":"Jürgenhake, Christoph","first_name":"Christoph","last_name":"Jürgenhake"},{"full_name":"Dumitrescu, Roman","last_name":"Dumitrescu","first_name":"Roman","id":"16190"}],"title":"Evaluation of different additive manufacturing technologies for MIDs in the context of smart sensor systems for retrofit applications","year":"2021","status":"public"},{"publication":"Procedia CIRP","citation":{"mla":"Menzefricke, Jörn Steffen, et al. “Socio-Technical Risk Management in the Age of Digital Transformation – Identification and Analysis of Existing Approaches.” <i>Procedia CIRP</i>, vol. 100, 2021, pp. 708–13.","bibtex":"@inproceedings{Menzefricke_Wiederkehr_Koldewey_Dumitrescu_2021, title={Socio-technical risk management in the age of digital transformation – identification and analysis of existing approaches}, volume={100}, booktitle={Procedia CIRP}, author={Menzefricke, Jörn Steffen and Wiederkehr, Ingrid and Koldewey, Christian and Dumitrescu, Roman}, year={2021}, pages={708–713} }","ama":"Menzefricke JS, Wiederkehr I, Koldewey C, Dumitrescu R. Socio-technical risk management in the age of digital transformation – identification and analysis of existing approaches. In: <i>Procedia CIRP</i>. Vol 100. ; 2021:708-713.","ieee":"J. S. Menzefricke, I. Wiederkehr, C. Koldewey, and R. Dumitrescu, “Socio-technical risk management in the age of digital transformation – identification and analysis of existing approaches,” in <i>Procedia CIRP</i>, 2021, vol. 100, pp. 708–713.","apa":"Menzefricke, J. S., Wiederkehr, I., Koldewey, C., &#38; Dumitrescu, R. (2021). Socio-technical risk management in the age of digital transformation – identification and analysis of existing approaches. <i>Procedia CIRP</i>, <i>100</i>, 708–713.","short":"J.S. Menzefricke, I. Wiederkehr, C. Koldewey, R. Dumitrescu, in: Procedia CIRP, 2021, pp. 708–713.","chicago":"Menzefricke, Jörn Steffen, Ingrid Wiederkehr, Christian Koldewey, and Roman Dumitrescu. “Socio-Technical Risk Management in the Age of Digital Transformation – Identification and Analysis of Existing Approaches.” In <i>Procedia CIRP</i>, 100:708–13, 2021."},"date_created":"2021-10-25T12:35:16Z","type":"conference","department":[{"_id":"563"}],"status":"public","year":"2021","title":"Socio-technical risk management in the age of digital transformation – identification and analysis of existing approaches","author":[{"id":"29799","full_name":"Menzefricke, Jörn Steffen","last_name":"Menzefricke","first_name":"Jörn Steffen"},{"full_name":"Wiederkehr, Ingrid","first_name":"Ingrid","last_name":"Wiederkehr","id":"38169"},{"id":"43136","full_name":"Koldewey, Christian","last_name":"Koldewey","orcid":"https://orcid.org/0000-0001-7992-6399","first_name":"Christian"},{"id":"16190","full_name":"Dumitrescu, Roman","last_name":"Dumitrescu","first_name":"Roman"}],"conference":{"end_date":"2021-05-21","start_date":"2021-05-19","name":"31st CIRP Design Conference"},"publication_status":"published","date_updated":"2022-01-06T06:57:29Z","page":"708-713","_id":"26839","language":[{"iso":"eng"}],"user_id":"15782","volume":"vol. 100"},{"user_id":"15782","page":"159 - 166","_id":"26843","language":[{"iso":"eng"}],"publication_status":"published","date_updated":"2022-01-06T06:57:29Z","status":"public","year":"2021","title":"Identification of Socio-Technical Risks and Their Correlations in the Context of Digital Transformation for the Manufacturing Sector","author":[{"first_name":"Felix","last_name":"Schnasse","full_name":"Schnasse, Felix"},{"id":"29799","last_name":"Menzefricke","first_name":"Jörn Steffen","full_name":"Menzefricke, Jörn Steffen"},{"id":"16190","full_name":"Dumitrescu, Roman","first_name":"Roman","last_name":"Dumitrescu"}],"conference":{"end_date":"2021-04-26","start_date":"2021-04-23","name":"IEEE 8th International Conference on Industrial Engineering and Applications (ICIEA)"},"type":"conference","department":[{"_id":"563"}],"date_created":"2021-10-25T12:53:11Z","publication":"Proceedings of the IEEE 8th International Conference on Industrial Engineering and Applications (ICIEA)","citation":{"bibtex":"@inproceedings{Schnasse_Menzefricke_Dumitrescu_2021, title={Identification of Socio-Technical Risks and Their Correlations in the Context of Digital Transformation for the Manufacturing Sector}, booktitle={Proceedings of the IEEE 8th International Conference on Industrial Engineering and Applications (ICIEA)}, author={Schnasse, Felix and Menzefricke, Jörn Steffen and Dumitrescu, Roman}, year={2021}, pages={159–166} }","ama":"Schnasse F, Menzefricke JS, Dumitrescu R. Identification of Socio-Technical Risks and Their Correlations in the Context of Digital Transformation for the Manufacturing Sector. In: <i>Proceedings of the IEEE 8th International Conference on Industrial Engineering and Applications (ICIEA)</i>. ; 2021:159-166.","mla":"Schnasse, Felix, et al. “Identification of Socio-Technical Risks and Their Correlations in the Context of Digital Transformation for the Manufacturing Sector.” <i>Proceedings of the IEEE 8th International Conference on Industrial Engineering and Applications (ICIEA)</i>, 2021, pp. 159–66.","chicago":"Schnasse, Felix, Jörn Steffen Menzefricke, and Roman Dumitrescu. “Identification of Socio-Technical Risks and Their Correlations in the Context of Digital Transformation for the Manufacturing Sector.” In <i>Proceedings of the IEEE 8th International Conference on Industrial Engineering and Applications (ICIEA)</i>, 159–66, 2021.","short":"F. Schnasse, J.S. Menzefricke, R. Dumitrescu, in: Proceedings of the IEEE 8th International Conference on Industrial Engineering and Applications (ICIEA), 2021, pp. 159–166.","ieee":"F. Schnasse, J. S. Menzefricke, and R. Dumitrescu, “Identification of Socio-Technical Risks and Their Correlations in the Context of Digital Transformation for the Manufacturing Sector,” in <i>Proceedings of the IEEE 8th International Conference on Industrial Engineering and Applications (ICIEA)</i>, 2021, pp. 159–166.","apa":"Schnasse, F., Menzefricke, J. S., &#38; Dumitrescu, R. (2021). Identification of Socio-Technical Risks and Their Correlations in the Context of Digital Transformation for the Manufacturing Sector. <i>Proceedings of the IEEE 8th International Conference on Industrial Engineering and Applications (ICIEA)</i>, 159–166."}},{"department":[{"_id":"563"}],"type":"conference","date_created":"2021-10-25T13:07:32Z","citation":{"mla":"Japs, Sergej, et al. “SAVE: Security &#38; Safety by Model-Based Systems Engineering on the Example of Automotive Industry.” <i>Procedia CIRP</i>, 2021, pp. 187–92.","bibtex":"@inproceedings{Japs_Anacker_Dumitrescu_2021, title={SAVE: Security &#38; safety by model-based systems engineering on the example of automotive industry}, booktitle={Procedia CIRP}, author={Japs, Sergej and Anacker, Harald and Dumitrescu, Roman}, year={2021}, pages={187–192} }","ama":"Japs S, Anacker H, Dumitrescu R. SAVE: Security &#38; safety by model-based systems engineering on the example of automotive industry. In: <i>Procedia CIRP</i>. ; 2021:187-192.","ieee":"S. Japs, H. Anacker, and R. Dumitrescu, “SAVE: Security &#38; safety by model-based systems engineering on the example of automotive industry,” in <i>Procedia CIRP</i>, 2021, pp. 187–192.","apa":"Japs, S., Anacker, H., &#38; Dumitrescu, R. (2021). SAVE: Security &#38; safety by model-based systems engineering on the example of automotive industry. <i>Procedia CIRP</i>, 187–192.","chicago":"Japs, Sergej, Harald Anacker, and Roman Dumitrescu. “SAVE: Security &#38; Safety by Model-Based Systems Engineering on the Example of Automotive Industry.” In <i>Procedia CIRP</i>, 187–92, 2021.","short":"S. Japs, H. Anacker, R. Dumitrescu, in: Procedia CIRP, 2021, pp. 187–192."},"publication":"Procedia CIRP","user_id":"15782","language":[{"iso":"eng"}],"_id":"26850","page":"187-192","date_updated":"2022-01-06T06:57:29Z","publication_status":"published","conference":{"end_date":"2021-05-21","start_date":"2021-05-19","name":"31st CIRP Design Conference"},"author":[{"last_name":"Japs","first_name":"Sergej","full_name":"Japs, Sergej"},{"first_name":"Harald","last_name":"Anacker","full_name":"Anacker, Harald"},{"full_name":"Dumitrescu, Roman","last_name":"Dumitrescu","first_name":"Roman","id":"16190"}],"title":"SAVE: Security & safety by model-based systems engineering on the example of automotive industry","status":"public","year":"2021"},{"citation":{"mla":"Dumitrescu, Roman, et al. “Erfolgspotentiale für die Zukunft des Engineeringstandorts Deutschland – Ein Beitrag zum Advanced Systems Engineering.” <i>Vorausschau und Technologieplanung - 16. Symposium Vorausschau und Technologieplanung</i>, edited by Jürgen Gausemeier et al., Heinz Nixdorf Institut, Universität Paderborn, 2021.","bibtex":"@inproceedings{Dumitrescu_Anacker_Grote_Rasor_Tekaat_Meyer_Gausemeier_Steglich_2021, place={Paderborn}, title={Erfolgspotentiale für die Zukunft des Engineeringstandorts Deutschland – Ein Beitrag zum Advanced Systems Engineering}, booktitle={Vorausschau und Technologieplanung - 16. Symposium Vorausschau und Technologieplanung}, publisher={Heinz Nixdorf Institut, Universität Paderborn}, author={Dumitrescu, Roman and Anacker, Harald and Grote, Eva-Maria and Rasor, Rik and Tekaat, Julian and Meyer, Maurice and Gausemeier, Jürgen and Steglich, Steffen}, editor={Gausemeier, Jürgen and Bauer, Wilhelm and Dumitrescu, Roman}, year={2021} }","ama":"Dumitrescu R, Anacker H, Grote E-M, et al. Erfolgspotentiale für die Zukunft des Engineeringstandorts Deutschland – Ein Beitrag zum Advanced Systems Engineering. In: Gausemeier J, Bauer W, Dumitrescu R, eds. <i>Vorausschau und Technologieplanung - 16. Symposium Vorausschau und Technologieplanung</i>. Heinz Nixdorf Institut, Universität Paderborn; 2021.","ieee":"R. Dumitrescu <i>et al.</i>, “Erfolgspotentiale für die Zukunft des Engineeringstandorts Deutschland – Ein Beitrag zum Advanced Systems Engineering,” in <i>Vorausschau und Technologieplanung - 16. Symposium Vorausschau und Technologieplanung</i>, Berlin, 2021.","apa":"Dumitrescu, R., Anacker, H., Grote, E.-M., Rasor, R., Tekaat, J., Meyer, M., Gausemeier, J., &#38; Steglich, S. (2021). Erfolgspotentiale für die Zukunft des Engineeringstandorts Deutschland – Ein Beitrag zum Advanced Systems Engineering. In J. Gausemeier, W. Bauer, &#38; R. Dumitrescu (Eds.), <i>Vorausschau und Technologieplanung - 16. Symposium Vorausschau und Technologieplanung</i>. Heinz Nixdorf Institut, Universität Paderborn.","short":"R. Dumitrescu, H. Anacker, E.-M. Grote, R. Rasor, J. Tekaat, M. Meyer, J. Gausemeier, S. Steglich, in: J. Gausemeier, W. Bauer, R. Dumitrescu (Eds.), Vorausschau und Technologieplanung - 16. Symposium Vorausschau und Technologieplanung, Heinz Nixdorf Institut, Universität Paderborn, Paderborn, 2021.","chicago":"Dumitrescu, Roman, Harald Anacker, Eva-Maria Grote, Rik Rasor, Julian Tekaat, Maurice Meyer, Jürgen Gausemeier, and Steffen Steglich. “Erfolgspotentiale für die Zukunft des Engineeringstandorts Deutschland – Ein Beitrag zum Advanced Systems Engineering.” In <i>Vorausschau und Technologieplanung - 16. Symposium Vorausschau und Technologieplanung</i>, edited by Jürgen Gausemeier, Wilhelm Bauer, and Roman Dumitrescu. Paderborn: Heinz Nixdorf Institut, Universität Paderborn, 2021."},"publication":"Vorausschau und Technologieplanung - 16. Symposium Vorausschau und Technologieplanung","department":[{"_id":"563"}],"type":"conference","date_created":"2021-10-25T13:32:30Z","place":"Paderborn","publication_status":"published","date_updated":"2022-01-06T06:57:29Z","author":[{"id":"16190","full_name":"Dumitrescu, Roman","first_name":"Roman","last_name":"Dumitrescu"},{"full_name":"Anacker, Harald","last_name":"Anacker","first_name":"Harald"},{"full_name":"Grote, Eva-Maria","last_name":"Grote","first_name":"Eva-Maria"},{"last_name":"Rasor","first_name":"Rik","full_name":"Rasor, Rik"},{"last_name":"Tekaat","first_name":"Julian","full_name":"Tekaat, Julian"},{"full_name":"Meyer, Maurice","last_name":"Meyer","first_name":"Maurice","orcid":"0000-0003-0606-7321","id":"77201"},{"id":"163","full_name":"Gausemeier, Jürgen","last_name":"Gausemeier","first_name":"Jürgen"},{"first_name":"Steffen","last_name":"Steglich","full_name":"Steglich, Steffen"}],"conference":{"end_date":"2021-12-03","start_date":"2021-12-02","name":"16. Symposium für Vorausschau und Technologieplanung","location":"Berlin"},"status":"public","title":"Erfolgspotentiale für die Zukunft des Engineeringstandorts Deutschland – Ein Beitrag zum Advanced Systems Engineering","year":"2021","editor":[{"first_name":"Jürgen","last_name":"Gausemeier","full_name":"Gausemeier, Jürgen"},{"full_name":"Bauer, Wilhelm","first_name":"Wilhelm","last_name":"Bauer"},{"full_name":"Dumitrescu, Roman","last_name":"Dumitrescu","first_name":"Roman"}],"user_id":"15782","_id":"26851","publisher":"Heinz Nixdorf Institut, Universität Paderborn","language":[{"iso":"ger"}]},{"date_created":"2021-10-25T13:40:50Z","department":[{"_id":"563"}],"type":"conference","citation":{"mla":"Kharatyan, Aschot, et al. “Metamodel for Safety and Security Integrated System Architecture Modeling.” <i> Proceedings of the Design Society</i>, vol. Vol. 1, 2021, pp. 2027–36.","ama":"Kharatyan A, Tekaat J, Japs S, Anacker H, Dumitrescu R. Metamodel for safety and security integrated system architecture modeling. In: <i> Proceedings of the Design Society</i>. Vol Vol. 1. ; 2021:2027-2036.","bibtex":"@inproceedings{Kharatyan_Tekaat_Japs_Anacker_Dumitrescu_2021, title={Metamodel for safety and security integrated system architecture modeling}, volume={Vol. 1}, booktitle={ Proceedings of the Design Society}, author={Kharatyan, Aschot and Tekaat, Julian and Japs, Sergej and Anacker, Harald and Dumitrescu, Roman}, year={2021}, pages={2027–2036} }","apa":"Kharatyan, A., Tekaat, J., Japs, S., Anacker, H., &#38; Dumitrescu, R. (2021). Metamodel for safety and security integrated system architecture modeling. <i> Proceedings of the Design Society</i>, <i>Vol. 1</i>, 2027–2036.","ieee":"A. Kharatyan, J. Tekaat, S. Japs, H. Anacker, and R. Dumitrescu, “Metamodel for safety and security integrated system architecture modeling,” in <i> Proceedings of the Design Society</i>, Cavtat, Dubrovnik, Croatia, 2021, vol. Vol. 1, pp. 2027–2036.","chicago":"Kharatyan, Aschot, Julian Tekaat, Sergej Japs, Harald Anacker, and Roman Dumitrescu. “Metamodel for Safety and Security Integrated System Architecture Modeling.” In <i> Proceedings of the Design Society</i>, Vol. 1:2027–36, 2021.","short":"A. Kharatyan, J. Tekaat, S. Japs, H. Anacker, R. Dumitrescu, in:  Proceedings of the Design Society, 2021, pp. 2027–2036."},"publication":" Proceedings of the Design Society","language":[{"iso":"eng"}],"_id":"26852","page":"2027 - 2036","volume":"Vol. 1","user_id":"15782","conference":{"end_date":"2020-05-21","location":"Cavtat, Dubrovnik, Croatia","name":"16th International Design Conference","start_date":"2020-05-18"},"author":[{"full_name":"Kharatyan, Aschot","last_name":"Kharatyan","first_name":"Aschot"},{"full_name":"Tekaat, Julian","first_name":"Julian","last_name":"Tekaat"},{"last_name":"Japs","first_name":"Sergej","full_name":"Japs, Sergej"},{"full_name":"Anacker, Harald","last_name":"Anacker","first_name":"Harald"},{"id":"16190","full_name":"Dumitrescu, Roman","first_name":"Roman","last_name":"Dumitrescu"}],"status":"public","year":"2021","title":"Metamodel for safety and security integrated system architecture modeling","date_updated":"2022-01-06T06:57:29Z","publication_status":"published"},{"department":[{"_id":"563"}],"type":"journal_article","date_created":"2021-10-25T14:43:11Z","abstract":[{"lang":"eng","text":"<jats:title>Abstract</jats:title><jats:p>Cyber-physical systems (CPS) are able the collect huge amounts of data about themselves, their users, and their environment during their usage phase. By feeding these usage data back into product planning, manufacturers can optimize their engineering and decision-making processes. Despite promising potentials, most manufacturers still do not analyze usage data within product planning. Also, research on usage data-driven product planning is scarce. Therefore, this paper aims to identify the main concepts, advantages, success factors and challenges of usage data-driven product planning. To answer the corresponding research questions, a comprehensive systematic literature review is conducted. From its results, a detailed description of usage data-driven product planning consisting of six main concepts is derived. Furthermore, taxonomies for the advantages, success factors and challenges of usage data-driven product planning are presented. The six main concepts and the three taxonomies allow for a deeper understanding of the topic while highlighting necessary future actions and research needs.</jats:p>"}],"citation":{"mla":"Meyer, Maurice, et al. “UNDERSTANDING USAGE DATA-DRIVEN PRODUCT PLANNING: A SYSTEMATIC LITERATURE REVIEW.” <i>Proceedings of the Design Society</i>, 2021, pp. 3289–98, doi:<a href=\"https://doi.org/10.1017/pds.2021.590\">10.1017/pds.2021.590</a>.","apa":"Meyer, M., Wiederkehr, I., Koldewey, C., &#38; Dumitrescu, R. (2021). UNDERSTANDING USAGE DATA-DRIVEN PRODUCT PLANNING: A SYSTEMATIC LITERATURE REVIEW. <i>Proceedings of the Design Society</i>, 3289–3298. <a href=\"https://doi.org/10.1017/pds.2021.590\">https://doi.org/10.1017/pds.2021.590</a>","ieee":"M. Meyer, I. Wiederkehr, C. Koldewey, and R. Dumitrescu, “UNDERSTANDING USAGE DATA-DRIVEN PRODUCT PLANNING: A SYSTEMATIC LITERATURE REVIEW,” <i>Proceedings of the Design Society</i>, pp. 3289–3298, 2021, doi: <a href=\"https://doi.org/10.1017/pds.2021.590\">10.1017/pds.2021.590</a>.","chicago":"Meyer, Maurice, Ingrid Wiederkehr, Christian Koldewey, and Roman Dumitrescu. “UNDERSTANDING USAGE DATA-DRIVEN PRODUCT PLANNING: A SYSTEMATIC LITERATURE REVIEW.” <i>Proceedings of the Design Society</i>, 2021, 3289–98. <a href=\"https://doi.org/10.1017/pds.2021.590\">https://doi.org/10.1017/pds.2021.590</a>.","ama":"Meyer M, Wiederkehr I, Koldewey C, Dumitrescu R. UNDERSTANDING USAGE DATA-DRIVEN PRODUCT PLANNING: A SYSTEMATIC LITERATURE REVIEW. <i>Proceedings of the Design Society</i>. Published online 2021:3289-3298. doi:<a href=\"https://doi.org/10.1017/pds.2021.590\">10.1017/pds.2021.590</a>","short":"M. Meyer, I. Wiederkehr, C. Koldewey, R. Dumitrescu, Proceedings of the Design Society (2021) 3289–3298.","bibtex":"@article{Meyer_Wiederkehr_Koldewey_Dumitrescu_2021, title={UNDERSTANDING USAGE DATA-DRIVEN PRODUCT PLANNING: A SYSTEMATIC LITERATURE REVIEW}, DOI={<a href=\"https://doi.org/10.1017/pds.2021.590\">10.1017/pds.2021.590</a>}, journal={Proceedings of the Design Society}, author={Meyer, Maurice and Wiederkehr, Ingrid and Koldewey, Christian and Dumitrescu, Roman}, year={2021}, pages={3289–3298} }"},"publication":"Proceedings of the Design Society","user_id":"43136","doi":"10.1017/pds.2021.590","language":[{"iso":"eng"}],"_id":"26855","page":"3289-3298","publication_status":"published","date_updated":"2022-01-06T06:57:29Z","publication_identifier":{"issn":["2732-527X"]},"author":[{"id":"77201","last_name":"Meyer","first_name":"Maurice","orcid":"0000-0003-0606-7321","full_name":"Meyer, Maurice"},{"id":"38169","full_name":"Wiederkehr, Ingrid","first_name":"Ingrid","last_name":"Wiederkehr"},{"first_name":"Christian","orcid":"https://orcid.org/0000-0001-7992-6399","last_name":"Koldewey","full_name":"Koldewey, Christian","id":"43136"},{"full_name":"Dumitrescu, Roman","last_name":"Dumitrescu","first_name":"Roman","id":"16190"}],"status":"public","title":"UNDERSTANDING USAGE DATA-DRIVEN PRODUCT PLANNING: A SYSTEMATIC LITERATURE REVIEW","year":"2021"},{"publication":"Vorausschau und Technologieplanung - 16. Symposium Vorausschau und Technologieplanung","citation":{"ieee":"M. Meyer <i>et al.</i>, “Zukunftsrobuste Weiterentwicklung von Produktportfolios: Erkenntnisse und Handlungsbedarfe aus der Praxis,” in <i>Vorausschau und Technologieplanung - 16. Symposium Vorausschau und Technologieplanung</i>, Berlin, 2021, vol. 400.","mla":"Meyer, Maurice, et al. “Zukunftsrobuste Weiterentwicklung von Produktportfolios: Erkenntnisse und Handlungsbedarfe aus der Praxis.” <i>Vorausschau und Technologieplanung - 16. Symposium Vorausschau und Technologieplanung</i>, edited by Jürgen Gausemeier et al., vol. 400, Heinz Nixdorf Institut, Universität Paderborn, 2021.","apa":"Meyer, M., Hemkentokrax, J.-P., Koldewey, C., Dumitrescu, R., Tröster, P. M., Schlegel, M., Kling, C. L., Rapp, S., &#38; Albers, A. (2021). Zukunftsrobuste Weiterentwicklung von Produktportfolios: Erkenntnisse und Handlungsbedarfe aus der Praxis. In J. Gausemeier, W. Bauer, &#38; R. Dumitrescu (Eds.), <i>Vorausschau und Technologieplanung - 16. Symposium Vorausschau und Technologieplanung</i> (Vol. 400). Heinz Nixdorf Institut, Universität Paderborn.","bibtex":"@inproceedings{Meyer_Hemkentokrax_Koldewey_Dumitrescu_Tröster_Schlegel_Kling_Rapp_Albers_2021, place={Paderborn}, title={Zukunftsrobuste Weiterentwicklung von Produktportfolios: Erkenntnisse und Handlungsbedarfe aus der Praxis}, volume={400}, booktitle={Vorausschau und Technologieplanung - 16. Symposium Vorausschau und Technologieplanung}, publisher={Heinz Nixdorf Institut, Universität Paderborn}, author={Meyer, Maurice and Hemkentokrax, Jan-Philipp and Koldewey, Christian and Dumitrescu, Roman and Tröster, Peter M. and Schlegel, Michael and Kling, Christopher L. and Rapp, Simon and Albers, Albert}, editor={Gausemeier, Jürgen and Bauer, Wilhelm and Dumitrescu, Roman}, year={2021} }","short":"M. Meyer, J.-P. Hemkentokrax, C. Koldewey, R. Dumitrescu, P.M. Tröster, M. Schlegel, C.L. Kling, S. Rapp, A. Albers, in: J. Gausemeier, W. Bauer, R. Dumitrescu (Eds.), Vorausschau und Technologieplanung - 16. Symposium Vorausschau und Technologieplanung, Heinz Nixdorf Institut, Universität Paderborn, Paderborn, 2021.","ama":"Meyer M, Hemkentokrax J-P, Koldewey C, et al. Zukunftsrobuste Weiterentwicklung von Produktportfolios: Erkenntnisse und Handlungsbedarfe aus der Praxis. In: Gausemeier J, Bauer W, Dumitrescu R, eds. <i>Vorausschau und Technologieplanung - 16. Symposium Vorausschau und Technologieplanung</i>. Vol 400. Heinz Nixdorf Institut, Universität Paderborn; 2021.","chicago":"Meyer, Maurice, Jan-Philipp Hemkentokrax, Christian Koldewey, Roman Dumitrescu, Peter M. Tröster, Michael Schlegel, Christopher L. Kling, Simon Rapp, and Albert Albers. “Zukunftsrobuste Weiterentwicklung von Produktportfolios: Erkenntnisse und Handlungsbedarfe aus der Praxis.” In <i>Vorausschau und Technologieplanung - 16. Symposium Vorausschau und Technologieplanung</i>, edited by Jürgen Gausemeier, Wilhelm Bauer, and Roman Dumitrescu, Vol. 400. Paderborn: Heinz Nixdorf Institut, Universität Paderborn, 2021."},"date_created":"2021-10-25T14:50:27Z","place":"Paderborn","type":"conference","department":[{"_id":"563"}],"title":"Zukunftsrobuste Weiterentwicklung von Produktportfolios: Erkenntnisse und Handlungsbedarfe aus der Praxis","status":"public","year":"2021","author":[{"id":"77201","orcid":"0000-0003-0606-7321","last_name":"Meyer","first_name":"Maurice","full_name":"Meyer, Maurice"},{"id":"76057","full_name":"Hemkentokrax, Jan-Philipp","last_name":"Hemkentokrax","first_name":"Jan-Philipp"},{"first_name":"Christian","last_name":"Koldewey","orcid":"https://orcid.org/0000-0001-7992-6399","full_name":"Koldewey, Christian","id":"43136"},{"full_name":"Dumitrescu, Roman","first_name":"Roman","last_name":"Dumitrescu","id":"16190"},{"first_name":"Peter M.","last_name":"Tröster","full_name":"Tröster, Peter M."},{"last_name":"Schlegel","first_name":"Michael","full_name":"Schlegel, Michael"},{"full_name":"Kling, Christopher L.","first_name":"Christopher L.","last_name":"Kling"},{"full_name":"Rapp, Simon","last_name":"Rapp","first_name":"Simon"},{"first_name":"Albert","last_name":"Albers","full_name":"Albers, Albert"}],"conference":{"end_date":"2021-12-03","location":"Berlin","start_date":"2021-12-02","name":"16. Symposium für Vorausschau und Technologieplanung"},"publication_status":"published","date_updated":"2022-01-06T06:57:29Z","intvolume":"       400","_id":"26857","publisher":"Heinz Nixdorf Institut, Universität Paderborn","language":[{"iso":"ger"}],"user_id":"15782","volume":400,"editor":[{"full_name":"Gausemeier, Jürgen","first_name":"Jürgen","last_name":"Gausemeier"},{"full_name":"Bauer, Wilhelm","first_name":"Wilhelm","last_name":"Bauer"},{"full_name":"Dumitrescu, Roman","last_name":"Dumitrescu","first_name":"Roman"}]},{"author":[{"id":"77201","last_name":"Meyer","orcid":"0000-0003-0606-7321","first_name":"Maurice","full_name":"Meyer, Maurice"},{"first_name":"Melina","last_name":"Panzner","full_name":"Panzner, Melina"},{"full_name":"Koldewey, Christian","first_name":"Christian","orcid":"https://orcid.org/0000-0001-7992-6399","last_name":"Koldewey","id":"43136"},{"full_name":"Dumitrescu, Roman","last_name":"Dumitrescu","first_name":"Roman","id":"16190"}],"title":"Towards Identifying Data Analytics Use Cases in Product Planning","year":"2021","status":"public","intvolume":"       104","date_updated":"2022-01-06T06:57:29Z","language":[{"iso":"eng"}],"_id":"26858","page":"1179-1184","volume":104,"user_id":"77201","citation":{"ieee":"M. Meyer, M. Panzner, C. Koldewey, and R. Dumitrescu, “Towards Identifying Data Analytics Use Cases in Product Planning,” <i>Procedia CIRP</i>, vol. 104, pp. 1179–1184, 2021.","apa":"Meyer, M., Panzner, M., Koldewey, C., &#38; Dumitrescu, R. (2021). Towards Identifying Data Analytics Use Cases in Product Planning. <i>Procedia CIRP</i>, <i>104</i>, 1179–1184.","short":"M. Meyer, M. Panzner, C. Koldewey, R. Dumitrescu, Procedia CIRP 104 (2021) 1179–1184.","chicago":"Meyer, Maurice, Melina Panzner, Christian Koldewey, and Roman Dumitrescu. “Towards Identifying Data Analytics Use Cases in Product Planning.” <i>Procedia CIRP</i> 104 (2021): 1179–84.","mla":"Meyer, Maurice, et al. “Towards Identifying Data Analytics Use Cases in Product Planning.” <i>Procedia CIRP</i>, vol. 104, 2021, pp. 1179–84.","bibtex":"@article{Meyer_Panzner_Koldewey_Dumitrescu_2021, title={Towards Identifying Data Analytics Use Cases in Product Planning}, volume={104}, journal={Procedia CIRP}, author={Meyer, Maurice and Panzner, Melina and Koldewey, Christian and Dumitrescu, Roman}, year={2021}, pages={1179–1184} }","ama":"Meyer M, Panzner M, Koldewey C, Dumitrescu R. Towards Identifying Data Analytics Use Cases in Product Planning. <i>Procedia CIRP</i>. 2021;104:1179-1184."},"publication":"Procedia CIRP","date_created":"2021-10-25T14:56:55Z","department":[{"_id":"563"}],"type":"journal_article"},{"publication":"Vorausschau und Technologieplanung - 16. Symposium Vorausschau und Technologieplanung","citation":{"apa":"Hemkentokrax, J.-P., Eckelt, D., Haarmann, L., Koldewey, C., &#38; Dumitrescu, R. (2021). Die Kraft von Startup-Partnerschaften  für das Innovationssystem eines Automobilzulieferers. In J. Gausemeier, W. Bauer, &#38; R. Dumitrescu (Eds.), <i>Vorausschau und Technologieplanung - 16. Symposium Vorausschau und Technologieplanung</i> (Vol. 400). Heinz Nixdorf Institut, Universität Paderborn.","ieee":"J.-P. Hemkentokrax, D. Eckelt, L. Haarmann, C. Koldewey, and R. Dumitrescu, “Die Kraft von Startup-Partnerschaften  für das Innovationssystem eines Automobilzulieferers,” in <i>Vorausschau und Technologieplanung - 16. Symposium Vorausschau und Technologieplanung</i>, Berlin, 2021, vol. 400.","chicago":"Hemkentokrax, Jan-Philipp, Daniel Eckelt, Lennard Haarmann, Christian Koldewey, and Roman Dumitrescu. “Die Kraft von Startup-Partnerschaften  für das Innovationssystem eines Automobilzulieferers.” In <i>Vorausschau und Technologieplanung - 16. Symposium Vorausschau und Technologieplanung</i>, edited by Jürgen Gausemeier, Wilhelm Bauer, and Roman Dumitrescu, Vol. 400. Paderborn: Heinz Nixdorf Institut, Universität Paderborn, 2021.","short":"J.-P. Hemkentokrax, D. Eckelt, L. Haarmann, C. Koldewey, R. Dumitrescu, in: J. Gausemeier, W. Bauer, R. Dumitrescu (Eds.), Vorausschau und Technologieplanung - 16. Symposium Vorausschau und Technologieplanung, Heinz Nixdorf Institut, Universität Paderborn, Paderborn, 2021.","mla":"Hemkentokrax, Jan-Philipp, et al. “Die Kraft von Startup-Partnerschaften  für das Innovationssystem eines Automobilzulieferers.” <i>Vorausschau und Technologieplanung - 16. Symposium Vorausschau und Technologieplanung</i>, edited by Jürgen Gausemeier et al., vol. 400, Heinz Nixdorf Institut, Universität Paderborn, 2021.","ama":"Hemkentokrax J-P, Eckelt D, Haarmann L, Koldewey C, Dumitrescu R. Die Kraft von Startup-Partnerschaften  für das Innovationssystem eines Automobilzulieferers. In: Gausemeier J, Bauer W, Dumitrescu R, eds. <i>Vorausschau und Technologieplanung - 16. Symposium Vorausschau und Technologieplanung</i>. Vol 400. Heinz Nixdorf Institut, Universität Paderborn; 2021.","bibtex":"@inproceedings{Hemkentokrax_Eckelt_Haarmann_Koldewey_Dumitrescu_2021, place={Paderborn}, title={Die Kraft von Startup-Partnerschaften  für das Innovationssystem eines Automobilzulieferers}, volume={400}, booktitle={Vorausschau und Technologieplanung - 16. Symposium Vorausschau und Technologieplanung}, publisher={Heinz Nixdorf Institut, Universität Paderborn}, author={Hemkentokrax, Jan-Philipp and Eckelt, Daniel and Haarmann, Lennard and Koldewey, Christian and Dumitrescu, Roman}, editor={Gausemeier, Jürgen and Bauer, Wilhelm and Dumitrescu, Roman}, year={2021} }"},"type":"conference","department":[{"_id":"563"}],"date_created":"2021-10-25T15:52:36Z","place":"Paderborn","publication_status":"published","date_updated":"2022-01-06T06:57:29Z","intvolume":"       400","status":"public","year":"2021","title":"Die Kraft von Startup-Partnerschaften  für das Innovationssystem eines Automobilzulieferers","author":[{"id":"76057","last_name":"Hemkentokrax","first_name":"Jan-Philipp","full_name":"Hemkentokrax, Jan-Philipp"},{"last_name":"Eckelt","first_name":"Daniel","full_name":"Eckelt, Daniel"},{"last_name":"Haarmann","first_name":"Lennard","full_name":"Haarmann, Lennard"},{"orcid":"https://orcid.org/0000-0001-7992-6399","first_name":"Christian","last_name":"Koldewey","full_name":"Koldewey, Christian","id":"43136"},{"id":"16190","last_name":"Dumitrescu","first_name":"Roman","full_name":"Dumitrescu, Roman"}],"conference":{"start_date":"2021-12-02","name":"16. Symposium für Vorausschau und Technologieplanung","location":"Berlin","end_date":"2021-12-03"},"user_id":"15782","volume":400,"editor":[{"full_name":"Gausemeier, Jürgen","first_name":"Jürgen","last_name":"Gausemeier"},{"full_name":"Bauer, Wilhelm","last_name":"Bauer","first_name":"Wilhelm"},{"full_name":"Dumitrescu, Roman","first_name":"Roman","last_name":"Dumitrescu"}],"_id":"26864","publisher":"Heinz Nixdorf Institut, Universität Paderborn","language":[{"iso":"ger"}]},{"publication_status":"published","date_updated":"2022-01-06T06:57:30Z","year":"2021","title":"Wörterbuch. Soziale Arbeit","status":"public","publication_identifier":{"isbn":["978-3-7799-3869-9"]},"author":[{"id":"91015","full_name":"Klünder, Nina","first_name":"Nina","last_name":"Klünder"}],"user_id":"61597","editor":[{"first_name":"Ralph-Christian","last_name":"Amthor","full_name":"Amthor, Ralph-Christian"},{"last_name":"Goldberg","first_name":"Brigitta","full_name":"Goldberg, Brigitta"},{"first_name":"Peter","last_name":"Hansbauer","full_name":"Hansbauer, Peter"},{"full_name":"Landes, Benjamin","last_name":"Landes","first_name":"Benjamin"},{"full_name":"Wintergerst, Theresia","last_name":"Wintergerst","first_name":"Theresia"}],"page":"997-999","publisher":"Beltz Juventa","_id":"26874","edition":"9","language":[{"iso":"ger"}],"publication":"Wörterbuch. Soziale Arbeit","citation":{"ieee":"N. Klünder, “Wörterbuch. Soziale Arbeit,” in <i>Wörterbuch. Soziale Arbeit</i>, 9th ed., R.-C. Amthor, B. Goldberg, P. Hansbauer, B. Landes, and T. Wintergerst, Eds. Weinheim: Beltz Juventa, 2021, pp. 997–999.","apa":"Klünder, N. (2021). Wörterbuch. Soziale Arbeit. In R.-C. Amthor, B. Goldberg, P. Hansbauer, B. Landes, &#38; T. Wintergerst (Eds.), <i>Wörterbuch. Soziale Arbeit</i> (9th ed., pp. 997–999). Beltz Juventa.","chicago":"Klünder, Nina. “Wörterbuch. Soziale Arbeit.” In <i>Wörterbuch. Soziale Arbeit</i>, edited by Ralph-Christian Amthor, Brigitta Goldberg, Peter Hansbauer, Benjamin Landes, and Theresia Wintergerst, 9th ed., 997–99. Weinheim: Beltz Juventa, 2021.","short":"N. Klünder, in: R.-C. Amthor, B. Goldberg, P. Hansbauer, B. Landes, T. Wintergerst (Eds.), Wörterbuch. Soziale Arbeit, 9th ed., Beltz Juventa, Weinheim, 2021, pp. 997–999.","mla":"Klünder, Nina. “Wörterbuch. Soziale Arbeit.” <i>Wörterbuch. Soziale Arbeit</i>, edited by Ralph-Christian Amthor et al., 9th ed., Beltz Juventa, 2021, pp. 997–99.","bibtex":"@inbook{Klünder_2021, place={Weinheim}, edition={9}, title={Wörterbuch. Soziale Arbeit}, booktitle={Wörterbuch. Soziale Arbeit}, publisher={Beltz Juventa}, author={Klünder, Nina}, editor={Amthor, Ralph-Christian and Goldberg, Brigitta and Hansbauer, Peter and Landes, Benjamin and Wintergerst, Theresia}, year={2021}, pages={997–999} }","ama":"Klünder N. Wörterbuch. Soziale Arbeit. In: Amthor R-C, Goldberg B, Hansbauer P, Landes B, Wintergerst T, eds. <i>Wörterbuch. Soziale Arbeit</i>. 9th ed. Beltz Juventa; 2021:997-999."},"type":"book_chapter","department":[{"_id":"17"},{"_id":"22"},{"_id":"394"}],"date_created":"2021-10-26T07:58:39Z","place":"Weinheim"},{"department":[{"_id":"460"}],"type":"journal_article","date_created":"2021-10-26T08:26:55Z","citation":{"ieee":"F. Hellmich, F. K. Hoya, J. R. Schulze, and E. Blumberg, “Effects of pre-service teachers’ collaboration on children’s competencies and motivation in (non-)inclusive primary school science lessons,” <i>International Journal of Inclusive Education</i>, pp. 1–15, 2021, doi: <a href=\"https://doi.org/10.1080/13603116.2020.1862406\">10.1080/13603116.2020.1862406</a>.","mla":"Hellmich, Frank, et al. “Effects of Pre-Service Teachers’ Collaboration on Children’s Competencies and Motivation in (Non-)Inclusive Primary School Science Lessons.” <i>International Journal of Inclusive Education</i>, 2021, pp. 1–15, doi:<a href=\"https://doi.org/10.1080/13603116.2020.1862406\">10.1080/13603116.2020.1862406</a>.","apa":"Hellmich, F., Hoya, F. K., Schulze, J. R., &#38; Blumberg, E. (2021). Effects of pre-service teachers’ collaboration on children’s competencies and motivation in (non-)inclusive primary school science lessons. <i>International Journal of Inclusive Education</i>, 1–15. <a href=\"https://doi.org/10.1080/13603116.2020.1862406\">https://doi.org/10.1080/13603116.2020.1862406</a>","bibtex":"@article{Hellmich_Hoya_Schulze_Blumberg_2021, title={Effects of pre-service teachers’ collaboration on children’s competencies and motivation in (non-)inclusive primary school science lessons}, DOI={<a href=\"https://doi.org/10.1080/13603116.2020.1862406\">10.1080/13603116.2020.1862406</a>}, journal={International Journal of Inclusive Education}, author={Hellmich, Frank and Hoya, Fabian Karl and Schulze, Jan Roland and Blumberg, Eva}, year={2021}, pages={1–15} }","chicago":"Hellmich, Frank, Fabian Karl Hoya, Jan Roland Schulze, and Eva Blumberg. “Effects of Pre-Service Teachers’ Collaboration on Children’s Competencies and Motivation in (Non-)Inclusive Primary School Science Lessons.” <i>International Journal of Inclusive Education</i>, 2021, 1–15. <a href=\"https://doi.org/10.1080/13603116.2020.1862406\">https://doi.org/10.1080/13603116.2020.1862406</a>.","short":"F. Hellmich, F.K. Hoya, J.R. Schulze, E. Blumberg, International Journal of Inclusive Education (2021) 1–15.","ama":"Hellmich F, Hoya FK, Schulze JR, Blumberg E. Effects of pre-service teachers’ collaboration on children’s competencies and motivation in (non-)inclusive primary school science lessons. <i>International Journal of Inclusive Education</i>. Published online 2021:1-15. doi:<a href=\"https://doi.org/10.1080/13603116.2020.1862406\">10.1080/13603116.2020.1862406</a>"},"publication":"International Journal of Inclusive Education","doi":"10.1080/13603116.2020.1862406","user_id":"57672","language":[{"iso":"eng"}],"_id":"26876","page":"1-15","date_updated":"2022-01-06T06:57:30Z","publication_status":"published","author":[{"last_name":"Hellmich","first_name":"Frank","full_name":"Hellmich, Frank","id":"26282"},{"id":"10600","full_name":"Hoya, Fabian Karl","last_name":"Hoya","first_name":"Fabian Karl"},{"id":"29492","full_name":"Schulze, Jan Roland","first_name":"Jan Roland","last_name":"Schulze"},{"last_name":"Blumberg","first_name":"Eva","full_name":"Blumberg, Eva"}],"publication_identifier":{"issn":["1360-3116","1464-5173"]},"title":"Effects of pre-service teachers’ collaboration on children’s competencies and motivation in (non-)inclusive primary school science lessons","year":"2021","status":"public"},{"publisher":"LibreCat University","_id":"26880","language":[{"iso":"ger"}],"doi":"10.17619/UNIPB/1-1190","user_id":"77594","status":"public","year":"2021","title":"Kollaborative, virtuelle Kreativumgebungen - Unterstützung der Ideengenerierung durch Virtual Reality","author":[{"full_name":"Taplick, Patrick","first_name":"Patrick","last_name":"Taplick"}],"date_updated":"2022-01-06T06:57:30Z","date_created":"2021-10-26T08:55:06Z","type":"dissertation","department":[{"_id":"152"}],"supervisor":[{"full_name":"Gräßler, Iris","first_name":"Iris","orcid":"0000-0001-5765-971X","last_name":"Gräßler","id":"47565"},{"full_name":"Paetzold, Kristin","first_name":"Kristin","last_name":"Paetzold"}],"citation":{"mla":"Taplick, Patrick. <i>Kollaborative, virtuelle Kreativumgebungen - Unterstützung der Ideengenerierung durch Virtual Reality</i>. LibreCat University, 2021, doi:<a href=\"https://doi.org/10.17619/UNIPB/1-1190\">10.17619/UNIPB/1-1190</a>.","bibtex":"@book{Taplick_2021, title={Kollaborative, virtuelle Kreativumgebungen - Unterstützung der Ideengenerierung durch Virtual Reality}, DOI={<a href=\"https://doi.org/10.17619/UNIPB/1-1190\">10.17619/UNIPB/1-1190</a>}, publisher={LibreCat University}, author={Taplick, Patrick}, year={2021} }","ama":"Taplick P. <i>Kollaborative, virtuelle Kreativumgebungen - Unterstützung der Ideengenerierung durch Virtual Reality</i>. LibreCat University; 2021. doi:<a href=\"https://doi.org/10.17619/UNIPB/1-1190\">10.17619/UNIPB/1-1190</a>","ieee":"P. Taplick, <i>Kollaborative, virtuelle Kreativumgebungen - Unterstützung der Ideengenerierung durch Virtual Reality</i>. LibreCat University, 2021.","apa":"Taplick, P. (2021). <i>Kollaborative, virtuelle Kreativumgebungen - Unterstützung der Ideengenerierung durch Virtual Reality</i>. LibreCat University. <a href=\"https://doi.org/10.17619/UNIPB/1-1190\">https://doi.org/10.17619/UNIPB/1-1190</a>","chicago":"Taplick, Patrick. <i>Kollaborative, virtuelle Kreativumgebungen - Unterstützung der Ideengenerierung durch Virtual Reality</i>. LibreCat University, 2021. <a href=\"https://doi.org/10.17619/UNIPB/1-1190\">https://doi.org/10.17619/UNIPB/1-1190</a>.","short":"P. Taplick, Kollaborative, virtuelle Kreativumgebungen - Unterstützung der Ideengenerierung durch Virtual Reality, LibreCat University, 2021."},"abstract":[{"text":"Die Globalisierung stellt Unternehmen, die international mit verteilten Gruppen agieren, vor Herausforderungen. Kreativität ist ein entscheidender Faktor für Unternehmen, um neue Produkte und Dienstleistungen zu gestalten und sich auf dieser Basis von Wettbewerbern abzuheben. Um verteilt agierende Gruppen in ihrer Kreativität zu unterstützen, gibt es bereits Community-Plattformen, die die Zusammenarbeit zur Problemlösung steigern. Eine direkte Methode zur Stimulation der Kreativität verteilt agierender Gruppen existiert bisher nicht. Die Virtual Reality (VR)-Technologie bietet Potenziale auf Basis visueller Stimulation die Kreativität zu unterstützen.Ziel dieser Arbeit ist die Untersuchung der Rahmenbedingungen zur Gestaltung einer VR-basierten Kreativitätstechnik und darauf aufbauend die Entwicklung der „Reizumgebungsmethode“,die durch ein VR-basiertes Werkzeug unterstützt wird. Die Grundlage für die Rahmenbedingungen resultiert aus dem Stand der Wissenschaft der Bereiche Kreativität, verteilt agierende Gruppen und Teams und VR. Aus diesen Bereichen werden Einflussfaktoren analysiert, Leitlinien entwickelt und diese für die Komponenten der Kreativitätstechnik kategorisiert. Auf Basis der Leitlinien wird die „Reizumgebungsmethode“, bestehend aus den Komponenten Kreativitätsprozess, VR-basiertes Werkzeug und virtuelle Kreativumgebungen entwickelt. In Form einer dreistufigen Validierung wird die entwickelte „Reizumgebungsmethode“ untersucht.","lang":"eng"},{"lang":"eng","text":"Globalization poses challenges for companies that operate internationally with distributed working groups. Creativity is a decisive factor for companies to design new products and services and to stand out from the competition on this basis. Community platforms are already in place to support distributed working groups in their creativity, which increase collaboration to solve problems. A direct method for stimulating the creativity of distributed groups does not yet exist. Virtual Reality (VR) technology offers the potential to support increased creativity on the basis of visual stimulation.The aim of this work is the investigation of the framework conditions for the design of a VR based creativity technique and, based on this, the development of the \"Reizumgebungsmethode\", which is supported by a VR based tool. The basis for the framework resultsfrom the state of the art in the areas of creativity, distributed working groups and teams and VR. Influential factors are analyzed from these areas, design guidelines are developed and these are categorized for the components of the creativity technique. On the basis of the design guidelines,the \"Reizumgebungsmethode\", consisting of the components creativity process, VR based tool and virtual creative environments, is developed. The developed \"Reizumgebungsmetode\"is examined in the form of a three-stage validation."}]},{"citation":{"ama":"Sieger A. <i>Mikrostrukturausprägung additiv gefertigter Gitterstrukturen</i>. Vol 23.; 2021.","bibtex":"@book{Sieger_2021, series={Forschungsberichte des Direct Manufacturing Research Centers}, title={Mikrostrukturausprägung additiv gefertigter Gitterstrukturen}, volume={23}, author={Sieger, Alexander}, year={2021}, collection={Forschungsberichte des Direct Manufacturing Research Centers} }","mla":"Sieger, Alexander. <i>Mikrostrukturausprägung additiv gefertigter Gitterstrukturen</i>. 2021.","short":"A. Sieger, Mikrostrukturausprägung additiv gefertigter Gitterstrukturen, 2021.","chicago":"Sieger, Alexander. <i>Mikrostrukturausprägung additiv gefertigter Gitterstrukturen</i>. Vol. 23. Forschungsberichte des Direct Manufacturing Research Centers, 2021.","apa":"Sieger, A. (2021). <i>Mikrostrukturausprägung additiv gefertigter Gitterstrukturen</i> (Vol. 23).","ieee":"A. Sieger, <i>Mikrostrukturausprägung additiv gefertigter Gitterstrukturen</i>, vol. 23. 2021."},"page":"136","_id":"26900","user_id":"77250","volume":23,"status":"public","date_created":"2021-10-26T13:35:56Z","type":"dissertation","keyword":["Additive Fertigung","TiAl6V4","316L","Gitterstrukturen","L-PBF"],"department":[{"_id":"9"},{"_id":"158"},{"_id":"219"}],"abstract":[{"lang":"ger","text":"Mit Hilfe der additiven Fertigung, insbesondere dem pulverbettbasierten selektiven Laserstrahl-schmelzen (LBM), können hochkomplexe Strukturen endkonturnah hergestellt werden. Die große Designfreiheit ermöglicht, zelluläre Leichtbaustrukturen zu erzeugen, deren mikrostrukturellen und mechanischen Eigenschaften direkt vom generativen Fertigungsverfahren abhängen. Insbesondere im Bereich des Leichtbaus bieten zelluläre Strukturen neue Ansätze zur Verminderung des Energieverbrauchs. Um dieses Potential vollständig ausschöpfen zu können, müssen die Effekte, die zum Versagen der Bauteile mit integrierten Gitterstrukturen führen, quantitativ beschrieben und verstanden werden. Dies ist Voraussetzung für eine sichere Auslegung. Dazu werden im Rahmen der vorliegenden Arbeit die charakteristischen Eigenschaften dieser Strukturen sowie die Einflussgrößen im Aufbauprozess näher beleuchtet.\r\nIm Rahmen dieser Dissertation werden numerische und experimentelle Untersuchungen von zwei unterschiedlichen Gitterstrukturtypen aus den Werkstoffen 316L und TiAl6V4 vorgestellt. Beide Werkstoffe werden unter monotoner, einachsiger Belastung getestet. Die parallel dazu durchgeführte digitale Bildkorrelation (DIC) ermöglicht gleichzeitig die detaillierte Analyse der lokalen Dehnungsverteilung während der Verformung. Mikrostrukturelle Eigenschaften und die resultierenden Gittercharakteristika werden mit Hilfe von rasterelektronenmikroskopischen Analysemethoden untersucht. Zudem erfolgt die Entwicklung eines Finite-Elemente- Modells, mit der Anforderung eines möglichst geringen Rechenaufwandes. Ein abschließender Vergleich der realen Dehnungsverteilung mit der FE- Analyse verifiziert das Modell."}],"extern":"1","series_title":"Forschungsberichte des Direct Manufacturing Research Centers","language":[{"iso":"ger"}],"title":"Mikrostrukturausprägung additiv gefertigter Gitterstrukturen","year":"2021","publication_identifier":{"isbn":["\t978-3-8440-7924-1"]},"author":[{"last_name":"Sieger","first_name":"Alexander","full_name":"Sieger, Alexander"}],"date_updated":"2022-01-06T06:57:30Z","publication_status":"published","intvolume":"        23"},{"date_created":"2021-10-26T13:55:37Z","place":"Fraunhofer-Institut für Arbeitswirtschaft und Organisation IAO, Stuttgart","type":"conference","department":[{"_id":"563"}],"publication":"Stuttgarter Symposium für Produktentwicklung SSP 2021","citation":{"chicago":"Wegel, Arthur, Philipp Sahrhage, Fabio Worthmann, Martin Rabe, and Roman Dumitrescu. “Referenzarchitektur für Smart Services.” In <i>Stuttgarter Symposium für Produktentwicklung SSP 2021</i>, edited by Hansgeorg Binz, Bernd Bertsche, Dieter Spath, and Daniel Roth, 12. Fraunhofer-Institut für Arbeitswirtschaft und Organisation IAO, Stuttgart, 2021. <a href=\"http://dx.doi.org/10.18419/opus-11478\">http://dx.doi.org/10.18419/opus-11478</a>.","short":"A. Wegel, P. Sahrhage, F. Worthmann, M. Rabe, R. Dumitrescu, in: H. Binz, B. Bertsche, D. Spath, D. Roth (Eds.), Stuttgarter Symposium für Produktentwicklung SSP 2021, Fraunhofer-Institut für Arbeitswirtschaft und Organisation IAO, Stuttgart, 2021, p. 12.","apa":"Wegel, A., Sahrhage, P., Worthmann, F., Rabe, M., &#38; Dumitrescu, R. (2021). Referenzarchitektur für Smart Services. In H. Binz, B. Bertsche, D. Spath, &#38; D. Roth (Eds.), <i>Stuttgarter Symposium für Produktentwicklung SSP 2021</i> (p. 12). <a href=\"http://dx.doi.org/10.18419/opus-11478\">http://dx.doi.org/10.18419/opus-11478</a>","ieee":"A. Wegel, P. Sahrhage, F. Worthmann, M. Rabe, and R. Dumitrescu, “Referenzarchitektur für Smart Services,” in <i>Stuttgarter Symposium für Produktentwicklung SSP 2021</i>, 2021, p. 12, doi: <a href=\"http://dx.doi.org/10.18419/opus-11478\">http://dx.doi.org/10.18419/opus-11478</a>.","ama":"Wegel A, Sahrhage P, Worthmann F, Rabe M, Dumitrescu R. Referenzarchitektur für Smart Services. In: Binz H, Bertsche B, Spath D, Roth D, eds. <i>Stuttgarter Symposium für Produktentwicklung SSP 2021</i>. ; 2021:12. doi:<a href=\"http://dx.doi.org/10.18419/opus-11478\">http://dx.doi.org/10.18419/opus-11478</a>","bibtex":"@inproceedings{Wegel_Sahrhage_Worthmann_Rabe_Dumitrescu_2021, place={Fraunhofer-Institut für Arbeitswirtschaft und Organisation IAO, Stuttgart}, title={Referenzarchitektur für Smart Services}, DOI={<a href=\"http://dx.doi.org/10.18419/opus-11478\">http://dx.doi.org/10.18419/opus-11478</a>}, booktitle={Stuttgarter Symposium für Produktentwicklung SSP 2021}, author={Wegel, Arthur and Sahrhage, Philipp and Worthmann, Fabio and Rabe, Martin and Dumitrescu, Roman}, editor={Binz, Hansgeorg and Bertsche, Bernd and Spath, Dieter and Roth, Daniel}, year={2021}, pages={12} }","mla":"Wegel, Arthur, et al. “Referenzarchitektur für Smart Services.” <i>Stuttgarter Symposium für Produktentwicklung SSP 2021</i>, edited by Hansgeorg Binz et al., 2021, p. 12, doi:<a href=\"http://dx.doi.org/10.18419/opus-11478\">http://dx.doi.org/10.18419/opus-11478</a>."},"page":"12","language":[{"iso":"ger"}],"_id":"26903","user_id":"15782","doi":"http://dx.doi.org/10.18419/opus-11478","editor":[{"last_name":"Binz","first_name":"Hansgeorg","full_name":"Binz, Hansgeorg"},{"first_name":"Bernd","last_name":"Bertsche","full_name":"Bertsche, Bernd"},{"first_name":"Dieter","last_name":"Spath","full_name":"Spath, Dieter"},{"first_name":"Daniel","last_name":"Roth","full_name":"Roth, Daniel"}],"title":"Referenzarchitektur für Smart Services","status":"public","year":"2021","author":[{"last_name":"Wegel","first_name":"Arthur","full_name":"Wegel, Arthur"},{"first_name":"Philipp","last_name":"Sahrhage","full_name":"Sahrhage, Philipp"},{"full_name":"Worthmann, Fabio","first_name":"Fabio","last_name":"Worthmann"},{"full_name":"Rabe, Martin","first_name":"Martin","last_name":"Rabe"},{"first_name":"Roman","last_name":"Dumitrescu","full_name":"Dumitrescu, Roman","id":"16190"}],"conference":{"end_date":"2021-05-20","start_date":"2021-05-20","name":"Stuttgarter Symposium für Produktentwicklung SSP 2021"},"publication_status":"published","date_updated":"2022-01-06T06:57:30Z"},{"intvolume":"       400","date_updated":"2022-01-06T06:57:30Z","conference":{"name":"16. Symposium für Vorausschau und Technologieplanung ","start_date":"2021-12-02","location":"Berlin","end_date":"2021-12-03"},"author":[{"full_name":"Reinhold, Jannik","last_name":"Reinhold","first_name":"Jannik","id":"33669"},{"id":"43136","first_name":"Christian","last_name":"Koldewey","orcid":"https://orcid.org/0000-0001-7992-6399","full_name":"Koldewey, Christian"},{"last_name":"Dumitrescu","first_name":"Roman","full_name":"Dumitrescu, Roman","id":"16190"},{"full_name":"Rausch, Gerhard","first_name":"Gerhard","last_name":"Rausch"}],"status":"public","title":"Smart Service-Transformation - Den Wandel der Wertschöpfung erfolgreich gestalten","year":"2021","editor":[{"first_name":"Jürgen","last_name":"Gausemeier","full_name":"Gausemeier, Jürgen"},{"first_name":"Wilhelm","last_name":"Bauer","full_name":"Bauer, Wilhelm"},{"full_name":"Dumitrescu, Roman","last_name":"Dumitrescu","first_name":"Roman"}],"volume":400,"user_id":"15782","_id":"26905","language":[{"iso":"eng"}],"publisher":"Heinz Nixdorf Institut, Universität Paderborn","citation":{"mla":"Reinhold, Jannik, et al. “Smart Service-Transformation - Den Wandel Der Wertschöpfung Erfolgreich Gestalten.” <i>Vorausschau Und Technologieplanung - 16. Symposium Vorausschau Und Technologieplanung</i>, edited by Jürgen Gausemeier et al., vol. 400, Heinz Nixdorf Institut, Universität Paderborn, 2021.","ama":"Reinhold J, Koldewey C, Dumitrescu R, Rausch G. Smart Service-Transformation - Den Wandel der Wertschöpfung erfolgreich gestalten. In: Gausemeier J, Bauer W, Dumitrescu R, eds. <i>Vorausschau Und Technologieplanung - 16. Symposium Vorausschau Und Technologieplanung</i>. Vol 400. Heinz Nixdorf Institut, Universität Paderborn; 2021.","bibtex":"@inproceedings{Reinhold_Koldewey_Dumitrescu_Rausch_2021, place={Paderborn}, title={Smart Service-Transformation - Den Wandel der Wertschöpfung erfolgreich gestalten}, volume={400}, booktitle={Vorausschau und Technologieplanung - 16. Symposium Vorausschau und Technologieplanung}, publisher={Heinz Nixdorf Institut, Universität Paderborn}, author={Reinhold, Jannik and Koldewey, Christian and Dumitrescu, Roman and Rausch, Gerhard}, editor={Gausemeier, Jürgen and Bauer, Wilhelm and Dumitrescu, Roman}, year={2021} }","apa":"Reinhold, J., Koldewey, C., Dumitrescu, R., &#38; Rausch, G. (2021). Smart Service-Transformation - Den Wandel der Wertschöpfung erfolgreich gestalten. In J. Gausemeier, W. Bauer, &#38; R. Dumitrescu (Eds.), <i>Vorausschau und Technologieplanung - 16. Symposium Vorausschau und Technologieplanung</i> (Vol. 400). Heinz Nixdorf Institut, Universität Paderborn.","ieee":"J. Reinhold, C. Koldewey, R. Dumitrescu, and G. Rausch, “Smart Service-Transformation - Den Wandel der Wertschöpfung erfolgreich gestalten,” in <i>Vorausschau und Technologieplanung - 16. Symposium Vorausschau und Technologieplanung</i>, Berlin, 2021, vol. 400.","short":"J. Reinhold, C. Koldewey, R. Dumitrescu, G. Rausch, in: J. Gausemeier, W. Bauer, R. Dumitrescu (Eds.), Vorausschau Und Technologieplanung - 16. Symposium Vorausschau Und Technologieplanung, Heinz Nixdorf Institut, Universität Paderborn, Paderborn, 2021.","chicago":"Reinhold, Jannik, Christian Koldewey, Roman Dumitrescu, and Gerhard Rausch. “Smart Service-Transformation - Den Wandel Der Wertschöpfung Erfolgreich Gestalten.” In <i>Vorausschau Und Technologieplanung - 16. Symposium Vorausschau Und Technologieplanung</i>, edited by Jürgen Gausemeier, Wilhelm Bauer, and Roman Dumitrescu, Vol. 400. Paderborn: Heinz Nixdorf Institut, Universität Paderborn, 2021."},"publication":"Vorausschau und Technologieplanung - 16. Symposium Vorausschau und Technologieplanung","department":[{"_id":"563"}],"type":"conference","place":"Paderborn","date_created":"2021-10-26T14:05:15Z"}]