---
_id: '23023'
abstract:
- lang: eng
text: DNA origami nanostructures (DONs) are promising substrates for the
single-molecule investigation of biomolecular reactions and dynamics by in situ
atomic force microscopy (AFM). For this, they are typically immobilized on mica
substrates by adding millimolar concentrations of Mg2+ ions to the sample solution,
which enable the adsorption of the negatively charged DONs at the like-charged
mica surface. These non-physiological Mg2+ concentrations, however, present a
serious limitation in such experiments as they may interfere with the reactions
and processes under investigation. Therefore, we here evaluate three approaches
to efficiently immobilize DONs at mica surfaces under essentially Mg2+-free conditions.
These approaches rely on the pre-adsorption of different multivalent cations,
i.e., Ni2+, poly-l-lysine (PLL), and spermidine (Spdn). DON adsorption is studied
in phosphate-buffered saline (PBS) and pure water. In general, Ni2+ shows the
worst performance with heavily deformed DONs. For 2D DON triangles, adsorption
at PLL- and in particular Spdn-modified mica may outperform even Mg2+-mediated
adsorption in terms of surface coverage, depending on the employed solution. For
3D six-helix bundles, less pronounced differences between the individual strategies
are observed. Our results provide some general guidance for the immobilization
of DONs at mica surfaces under Mg2+-free conditions and may aid future in situ
AFM studies.
author:
- first_name: Yang
full_name: Xin, Yang
last_name: Xin
- first_name: Amir Ardalan
full_name: Zargariantabrizi, Amir Ardalan
last_name: Zargariantabrizi
- first_name: Guido
full_name: Grundmeier, Guido
id: '194'
last_name: Grundmeier
- first_name: Adrian
full_name: Keller, Adrian
id: '48864'
last_name: Keller
orcid: 0000-0001-7139-3110
citation:
ama: Xin Y, Zargariantabrizi AA, Grundmeier G, Keller A. Magnesium-Free Immobilization
of DNA Origami Nanostructures at Mica Surfaces for Atomic Force Microscopy. Molecules.
2021;26:4798. doi:10.3390/molecules26164798
apa: Xin, Y., Zargariantabrizi, A. A., Grundmeier, G., & Keller, A. (2021).
Magnesium-Free Immobilization of DNA Origami Nanostructures at Mica Surfaces for
Atomic Force Microscopy. Molecules, 26, 4798. https://doi.org/10.3390/molecules26164798
bibtex: '@article{Xin_Zargariantabrizi_Grundmeier_Keller_2021, title={Magnesium-Free
Immobilization of DNA Origami Nanostructures at Mica Surfaces for Atomic Force
Microscopy}, volume={26}, DOI={10.3390/molecules26164798},
journal={Molecules}, author={Xin, Yang and Zargariantabrizi, Amir Ardalan and
Grundmeier, Guido and Keller, Adrian}, year={2021}, pages={4798} }'
chicago: 'Xin, Yang, Amir Ardalan Zargariantabrizi, Guido Grundmeier, and Adrian
Keller. “Magnesium-Free Immobilization of DNA Origami Nanostructures at Mica Surfaces
for Atomic Force Microscopy.” Molecules 26 (2021): 4798. https://doi.org/10.3390/molecules26164798.'
ieee: Y. Xin, A. A. Zargariantabrizi, G. Grundmeier, and A. Keller, “Magnesium-Free
Immobilization of DNA Origami Nanostructures at Mica Surfaces for Atomic Force
Microscopy,” Molecules, vol. 26, p. 4798, 2021.
mla: Xin, Yang, et al. “Magnesium-Free Immobilization of DNA Origami Nanostructures
at Mica Surfaces for Atomic Force Microscopy.” Molecules, vol. 26, 2021,
p. 4798, doi:10.3390/molecules26164798.
short: Y. Xin, A.A. Zargariantabrizi, G. Grundmeier, A. Keller, Molecules 26 (2021)
4798.
date_created: 2021-08-09T06:17:59Z
date_updated: 2022-01-06T06:55:45Z
department:
- _id: '302'
doi: 10.3390/molecules26164798
intvolume: ' 26'
language:
- iso: eng
page: '4798'
publication: Molecules
publication_identifier:
issn:
- 1420-3049
publication_status: published
status: public
title: Magnesium-Free Immobilization of DNA Origami Nanostructures at Mica Surfaces
for Atomic Force Microscopy
type: journal_article
user_id: '48864'
volume: 26
year: '2021'
...
---
_id: '23277'
abstract:
- lang: eng
text: We exploit a recently developed funnel control methodology for linear non-minimum
phase systems to design an output error feedback controller for a nonlinear robotic
manipulator, which is not minimum phase. We illustrate the novel control design
by a numerical case study where we simulate end-effector output tracking of the
robotic manipulator.
author:
- first_name: Thomas
full_name: Berger, Thomas
last_name: Berger
- first_name: Lukas Johannes
full_name: Lanza, Lukas Johannes
id: '78640'
last_name: Lanza
citation:
ama: Berger T, Lanza LJ. Output tracking for a non-minimum phase robotic manipulator.
IFAC-PapersOnLine. 2021:178-185. doi:10.1016/j.ifacol.2021.06.074
apa: Berger, T., & Lanza, L. J. (2021). Output tracking for a non-minimum phase
robotic manipulator. IFAC-PapersOnLine, 178–185. https://doi.org/10.1016/j.ifacol.2021.06.074
bibtex: '@article{Berger_Lanza_2021, title={Output tracking for a non-minimum phase
robotic manipulator}, DOI={10.1016/j.ifacol.2021.06.074},
journal={IFAC-PapersOnLine}, author={Berger, Thomas and Lanza, Lukas Johannes},
year={2021}, pages={178–185} }'
chicago: Berger, Thomas, and Lukas Johannes Lanza. “Output Tracking for a Non-Minimum
Phase Robotic Manipulator.” IFAC-PapersOnLine, 2021, 178–85. https://doi.org/10.1016/j.ifacol.2021.06.074.
ieee: T. Berger and L. J. Lanza, “Output tracking for a non-minimum phase robotic
manipulator,” IFAC-PapersOnLine, pp. 178–185, 2021.
mla: Berger, Thomas, and Lukas Johannes Lanza. “Output Tracking for a Non-Minimum
Phase Robotic Manipulator.” IFAC-PapersOnLine, 2021, pp. 178–85, doi:10.1016/j.ifacol.2021.06.074.
short: T. Berger, L.J. Lanza, IFAC-PapersOnLine (2021) 178–185.
date_created: 2021-08-09T09:13:11Z
date_updated: 2022-01-06T06:55:48Z
doi: 10.1016/j.ifacol.2021.06.074
language:
- iso: eng
main_file_link:
- url: https://www.sciencedirect.com/science/article/pii/S2405896321005309
page: 178-185
publication: IFAC-PapersOnLine
publication_identifier:
issn:
- 2405-8963
publication_status: published
status: public
title: Output tracking for a non-minimum phase robotic manipulator
type: journal_article
user_id: '78640'
year: '2021'
...
---
_id: '23374'
author:
- first_name: Sriteja
full_name: Kummita, Sriteja
last_name: Kummita
- first_name: Goran
full_name: Piskachev, Goran
last_name: Piskachev
- first_name: Johannes
full_name: Spath, Johannes
last_name: Spath
- first_name: Eric
full_name: Bodden, Eric
last_name: Bodden
citation:
ama: 'Kummita S, Piskachev G, Spath J, Bodden E. Qualitative and Quantitative Analysis
of Callgraph Algorithms for Python. In: 2021 International Conference on Code
Quality (ICCQ). ; 2021. doi:10.1109/iccq51190.2021.9392986'
apa: Kummita, S., Piskachev, G., Spath, J., & Bodden, E. (2021). Qualitative
and Quantitative Analysis of Callgraph Algorithms for Python. 2021 International
Conference on Code Quality (ICCQ). https://doi.org/10.1109/iccq51190.2021.9392986
bibtex: '@inproceedings{Kummita_Piskachev_Spath_Bodden_2021, title={Qualitative
and Quantitative Analysis of Callgraph Algorithms for Python}, DOI={10.1109/iccq51190.2021.9392986},
booktitle={2021 International Conference on Code Quality (ICCQ)}, author={Kummita,
Sriteja and Piskachev, Goran and Spath, Johannes and Bodden, Eric}, year={2021}
}'
chicago: Kummita, Sriteja, Goran Piskachev, Johannes Spath, and Eric Bodden. “Qualitative
and Quantitative Analysis of Callgraph Algorithms for Python.” In 2021 International
Conference on Code Quality (ICCQ), 2021. https://doi.org/10.1109/iccq51190.2021.9392986.
ieee: 'S. Kummita, G. Piskachev, J. Spath, and E. Bodden, “Qualitative and Quantitative
Analysis of Callgraph Algorithms for Python,” 2021, doi: 10.1109/iccq51190.2021.9392986.'
mla: Kummita, Sriteja, et al. “Qualitative and Quantitative Analysis of Callgraph
Algorithms for Python.” 2021 International Conference on Code Quality (ICCQ),
2021, doi:10.1109/iccq51190.2021.9392986.
short: 'S. Kummita, G. Piskachev, J. Spath, E. Bodden, in: 2021 International Conference
on Code Quality (ICCQ), 2021.'
date_created: 2021-08-09T12:01:11Z
date_updated: 2022-01-06T06:55:50Z
department:
- _id: '241'
- _id: '662'
- _id: '76'
doi: 10.1109/iccq51190.2021.9392986
language:
- iso: eng
publication: 2021 International Conference on Code Quality (ICCQ)
publication_status: published
status: public
title: Qualitative and Quantitative Analysis of Callgraph Algorithms for Python
type: conference
user_id: '5786'
year: '2021'
...
---
_id: '23385'
abstract:
- lang: eng
text: Innovative self-correcting process control techniques which adapt to the initial
geometric characteristics of the strip are a promising approach to fix the local
varying distortion of coiled strips by optimizing the leveling process. This paper
presents an innovative strategy to improve straightening of AHSS materials (1.4310).
This implies optimized leveling, adding minimal plastic deformation, and, thus,
strain hardening. Therefore, an “intelligent straightening machine” is being developed
which will be presented. To operate an intelligent straightening machine a reliable
online measurement of the surface defects is fundamentally essential. This paper
describes an approach towards the measurement of a bent steel strip for an automatic
straightening process. Therefore, various ways of measuring the bending curvature
are investigated. Optical, tactile, and the electromagnetic induction testing
MagnaTest are compared with each other. The bending measurement is linked to open-loop
control, providing an optimal straightening result in regards of formability,
leveling, and reduced strain hardening.
author:
- first_name: Fabian
full_name: Bader, Fabian
id: '65204'
last_name: Bader
- first_name: Lukas
full_name: Bathelt, Lukas
last_name: Bathelt
- first_name: Eugen
full_name: Djakow, Eugen
last_name: Djakow
- first_name: Werner
full_name: Homberg, Werner
last_name: Homberg
- first_name: Christian
full_name: Henke, Christian
last_name: Henke
- first_name: Ansgar
full_name: Trächtler, Ansgar
last_name: Trächtler
citation:
ama: 'Bader F, Bathelt L, Djakow E, Homberg W, Henke C, Trächtler A. Self-optimized,
Intelligent Open-Loop-Controlled Steel Strip Straightening Machine for Advanced
Formability. In: Forming the Future. Cham; 2021. doi:10.1007/978-3-030-75381-8_1'
apa: Bader, F., Bathelt, L., Djakow, E., Homberg, W., Henke, C., & Trächtler,
A. (2021). Self-optimized, Intelligent Open-Loop-Controlled Steel Strip Straightening
Machine for Advanced Formability. In Forming the Future. Cham. https://doi.org/10.1007/978-3-030-75381-8_1
bibtex: '@inbook{Bader_Bathelt_Djakow_Homberg_Henke_Trächtler_2021, place={Cham},
title={Self-optimized, Intelligent Open-Loop-Controlled Steel Strip Straightening
Machine for Advanced Formability}, DOI={10.1007/978-3-030-75381-8_1},
booktitle={Forming the Future}, author={Bader, Fabian and Bathelt, Lukas and Djakow,
Eugen and Homberg, Werner and Henke, Christian and Trächtler, Ansgar}, year={2021}
}'
chicago: Bader, Fabian, Lukas Bathelt, Eugen Djakow, Werner Homberg, Christian Henke,
and Ansgar Trächtler. “Self-Optimized, Intelligent Open-Loop-Controlled Steel
Strip Straightening Machine for Advanced Formability.” In Forming the Future.
Cham, 2021. https://doi.org/10.1007/978-3-030-75381-8_1.
ieee: F. Bader, L. Bathelt, E. Djakow, W. Homberg, C. Henke, and A. Trächtler, “Self-optimized,
Intelligent Open-Loop-Controlled Steel Strip Straightening Machine for Advanced
Formability,” in Forming the Future, Cham, 2021.
mla: Bader, Fabian, et al. “Self-Optimized, Intelligent Open-Loop-Controlled Steel
Strip Straightening Machine for Advanced Formability.” Forming the Future,
2021, doi:10.1007/978-3-030-75381-8_1.
short: 'F. Bader, L. Bathelt, E. Djakow, W. Homberg, C. Henke, A. Trächtler, in:
Forming the Future, Cham, 2021.'
date_created: 2021-08-12T08:45:46Z
date_updated: 2022-01-06T06:55:52Z
doi: 10.1007/978-3-030-75381-8_1
language:
- iso: eng
place: Cham
publication: Forming the Future
publication_identifier:
issn:
- 2367-1181
- 2367-1696
publication_status: published
status: public
title: Self-optimized, Intelligent Open-Loop-Controlled Steel Strip Straightening
Machine for Advanced Formability
type: book_chapter
user_id: '65204'
year: '2021'
...
---
_id: '23388'
abstract:
- lang: eng
text: As one of the most popular programming languages, PYTHON has become a relevant
target language for static analysis tools. The primary data structure for performing
an inter-procedural static analysis is call-graph (CG), which links call sites
to potential call targets in a program. There exists multiple algorithms for constructing
callgraphs, tailored to specific languages. However, comparatively few implementations
target PYTHON. Moreover, there is still lack of empirical evidence as to how these
few algorithms perform in terms of precision and recall. This paper thus presents
EVAL_CG, an extensible framework for comparative analysis of Python call-graphs.
We conducted two experiments which run the CG algorithms on different Python programming
constructs and real-world applications. In both experiments, we evaluate three
CG generation frameworks namely, Code2flow, Pyan, and Wala. We record precision,
recall, and running time, and identify sources of unsoundness of each framework.
Our evaluation shows that none of the current CG construction frameworks produce
a sound CG. Moreover, the static CGs contain many spurious edges. Code2flow is
also comparatively slow. Hence, further research is needed to support CG generation
for Python programs.
author:
- first_name: Sriteja
full_name: Kummita, Sriteja
id: '72582'
last_name: Kummita
- first_name: Goran
full_name: Piskachev, Goran
id: '41936'
last_name: Piskachev
orcid: 0000-0003-4424-5838
- first_name: Johannes
full_name: Spaeth, Johannes
last_name: Spaeth
- first_name: Eric
full_name: Bodden, Eric
id: '59256'
last_name: Bodden
orcid: 0000-0003-3470-3647
citation:
ama: 'Kummita S, Piskachev G, Spaeth J, Bodden E. Qualitative and Quantitative Analysis
of Callgraph Algorithms for PYTHON. In: Proceedings of the 2021 International
Conference on Code Quality (ICCQ). ; 2021. doi:10.1109/ICCQ51190.2021.9392986'
apa: Kummita, S., Piskachev, G., Spaeth, J., & Bodden, E. (2021). Qualitative
and Quantitative Analysis of Callgraph Algorithms for PYTHON. In Proceedings
of the 2021 International Conference on Code Quality (ICCQ). Virtual. https://doi.org/10.1109/ICCQ51190.2021.9392986
bibtex: '@inproceedings{Kummita_Piskachev_Spaeth_Bodden_2021, title={Qualitative
and Quantitative Analysis of Callgraph Algorithms for PYTHON}, DOI={10.1109/ICCQ51190.2021.9392986},
booktitle={Proceedings of the 2021 International Conference on Code Quality (ICCQ)},
author={Kummita, Sriteja and Piskachev, Goran and Spaeth, Johannes and Bodden,
Eric}, year={2021} }'
chicago: Kummita, Sriteja, Goran Piskachev, Johannes Spaeth, and Eric Bodden. “Qualitative
and Quantitative Analysis of Callgraph Algorithms for PYTHON.” In Proceedings
of the 2021 International Conference on Code Quality (ICCQ), 2021. https://doi.org/10.1109/ICCQ51190.2021.9392986.
ieee: S. Kummita, G. Piskachev, J. Spaeth, and E. Bodden, “Qualitative and Quantitative
Analysis of Callgraph Algorithms for PYTHON,” in Proceedings of the 2021 International
Conference on Code Quality (ICCQ), Virtual, 2021.
mla: Kummita, Sriteja, et al. “Qualitative and Quantitative Analysis of Callgraph
Algorithms for PYTHON.” Proceedings of the 2021 International Conference on
Code Quality (ICCQ), 2021, doi:10.1109/ICCQ51190.2021.9392986.
short: 'S. Kummita, G. Piskachev, J. Spaeth, E. Bodden, in: Proceedings of the 2021
International Conference on Code Quality (ICCQ), 2021.'
conference:
location: Virtual
name: International Conference on Code Quality (ICCQ)
start_date: 2021-03-27
date_created: 2021-08-12T14:00:54Z
date_updated: 2022-01-06T06:55:52Z
doi: 10.1109/ICCQ51190.2021.9392986
keyword:
- Static Analysis
- Callgraph Analysis
- Python
- Qualitative Analysis
- Quantitative Analysis
- Empirical Evaluation
language:
- iso: eng
main_file_link:
- url: https://ieeexplore.ieee.org/document/9392986
publication: Proceedings of the 2021 International Conference on Code Quality (ICCQ)
publication_identifier:
isbn:
- 978-1-7281-8477-7
publication_status: published
status: public
title: Qualitative and Quantitative Analysis of Callgraph Algorithms for PYTHON
type: conference
user_id: '72582'
year: '2021'
...
---
_id: '23391'
abstract:
- lang: eng
text: In der Softwareentwicklung werden Requirement Mining-Ansätze eingesetzt, um
in der Ermittlung von Anforderungen Informationen aus Benutzerrezensionen zu extrahieren.
Auf der Online-Plattform Amazon werden verschiedene mechatronische Produkte des
B2C-Markts vertrieben und deren Benutzerrezensionen gesammelt. Aufgrund der Komplexität
mechatronischer Produkte werden Defizite selten nachvollziehbar im Benutzer-Feedback
dokumentiert. In diesem Beitrag wird die Forschungsfrage beantwortet, ob Requirement
Mining-Ansätze auch in der Produktgenerationenentwicklung mechatronischer Produkte
des B2C-Markts anwendbar sind. Etablierte Requirement Mining-Ansätze werden in
einer Literaturstudie identifiziert und die Anwendbarkeit initial bewertet. Der
vielversprechendste Ansatz wird für eine weitergehende Analyse ausgewählt. Hierzu
wird ein Fallbeispiel untersucht, indem Benutzeranforderungen eines Staubsauger-
Roboters ausgewertet werden. Die Ergebnisse zeigen, dass die Informationsqualität
hoch ist und Anforderungsingenieure diese Informationen zur Dokumentation der
Bedürfnisse der Benutzer verwenden können.
author:
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: Daniel
full_name: Preuß, Daniel
id: '40253'
last_name: Preuß
citation:
ama: 'Gräßler I, Preuß D. Anwendbarkeit von Requirement Mining in Benutzerrezensionen
für die Entwicklung mechatronischer Produkte im B2C-Markt. In: Bertram T, Corves
B, Janschek K, Rinderknecht S, eds. Digital-Fachtagung VDI Mechatronik 2021;
24. - 25. Mrz. 2021. ; 2021:68-73.'
apa: Gräßler, I., & Preuß, D. (2021). Anwendbarkeit von Requirement Mining in
Benutzerrezensionen für die Entwicklung mechatronischer Produkte im B2C-Markt.
In T. Bertram, B. Corves, K. Janschek, & S. Rinderknecht (Eds.), Digital-Fachtagung
VDI Mechatronik 2021; 24. - 25. Mrz. 2021 (pp. 68–73).
bibtex: '@inproceedings{Gräßler_Preuß_2021, title={Anwendbarkeit von Requirement
Mining in Benutzerrezensionen für die Entwicklung mechatronischer Produkte im
B2C-Markt}, booktitle={Digital-Fachtagung VDI Mechatronik 2021; 24. - 25. Mrz.
2021}, author={Gräßler, Iris and Preuß, Daniel}, editor={Bertram, Torsten and
Corves, Burkhard and Janschek, Klaus and Rinderknecht, StephanEditors}, year={2021},
pages={68–73} }'
chicago: Gräßler, Iris, and Daniel Preuß. “Anwendbarkeit von Requirement Mining
in Benutzerrezensionen für die Entwicklung mechatronischer Produkte im B2C-Markt.”
In Digital-Fachtagung VDI Mechatronik 2021; 24. - 25. Mrz. 2021, edited
by Torsten Bertram, Burkhard Corves, Klaus Janschek, and Stephan Rinderknecht,
68–73, 2021.
ieee: I. Gräßler and D. Preuß, “Anwendbarkeit von Requirement Mining in Benutzerrezensionen
für die Entwicklung mechatronischer Produkte im B2C-Markt,” in Digital-Fachtagung
VDI Mechatronik 2021; 24. - 25. Mrz. 2021, 2021, pp. 68–73.
mla: Gräßler, Iris, and Daniel Preuß. “Anwendbarkeit von Requirement Mining in Benutzerrezensionen
für die Entwicklung mechatronischer Produkte im B2C-Markt.” Digital-Fachtagung
VDI Mechatronik 2021; 24. - 25. Mrz. 2021, edited by Torsten Bertram et al.,
2021, pp. 68–73.
short: 'I. Gräßler, D. Preuß, in: T. Bertram, B. Corves, K. Janschek, S. Rinderknecht
(Eds.), Digital-Fachtagung VDI Mechatronik 2021; 24. - 25. Mrz. 2021, 2021, pp.
68–73.'
conference:
end_date: 2021-03-25
start_date: 2021-03-24
date_created: 2021-08-13T06:48:01Z
date_updated: 2022-01-06T06:55:52Z
department:
- _id: '152'
editor:
- first_name: Torsten
full_name: Bertram, Torsten
last_name: Bertram
- first_name: Burkhard
full_name: Corves, Burkhard
last_name: Corves
- first_name: Klaus
full_name: Janschek, Klaus
last_name: Janschek
- first_name: Stephan
full_name: Rinderknecht, Stephan
last_name: Rinderknecht
language:
- iso: ger
main_file_link:
- url: 'DOI: 10.26083/tuprints-00017626'
page: 68-73
publication: Digital-Fachtagung VDI Mechatronik 2021; 24. - 25. Mrz. 2021
status: public
title: Anwendbarkeit von Requirement Mining in Benutzerrezensionen für die Entwicklung
mechatronischer Produkte im B2C-Markt
type: conference
user_id: '21240'
year: '2021'
...
---
_id: '21679'
abstract:
- lang: eng
text: Three-dimensional modelling enables to determine the in-plane material
flow in asymmetrical situation. Thus, the distortion of the sheets to be joined
can be characterized more exactly. This study shows a method for building up a
three-dimensional shear-clinching framework without damage criteria. In fact,
the die-sided sheet in shear-clinching was designed as a pre-punched sheet and
slugs. The material separation in the die-sided joining partner, which in two-dimensional
simulation is often described by macro- and micromechanical fracture criteria,
was realised in this study based on a defined contact condition. By means of a
shear-cutting simulation, a correlation between the break angle and the separation
stress was determined, which was used as a separation criterion in the shear-clinching
simulation. The separation line was confirmed using post-particles. To validate
this model, the results of the simulation using a quadratic single-point specimen
were compared to the experiments with respect to the distortion of the joining
partner. In general, the built three-dimensional framework provides for further
tool developments with regard to the reduction of distortion in shear-clinching.
author:
- first_name: Daxin
full_name: Han, Daxin
id: '36544'
last_name: Han
- first_name: Chen
full_name: Yang, Chen
last_name: Yang
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: Han D, Yang C, Meschut G. A method for three-dimensional modelling of the shear-clinching
process. ESAFORM 2021. 2021. doi:10.25518/esaform21.1948
apa: Han, D., Yang, C., & Meschut, G. (2021). A method for three-dimensional
modelling of the shear-clinching process. ESAFORM 2021. https://doi.org/10.25518/esaform21.1948
bibtex: '@article{Han_Yang_Meschut_2021, title={A method for three-dimensional modelling
of the shear-clinching process}, DOI={10.25518/esaform21.1948},
journal={ESAFORM 2021}, author={Han, Daxin and Yang, Chen and Meschut, Gerson},
year={2021} }'
chicago: Han, Daxin, Chen Yang, and Gerson Meschut. “A Method for Three-Dimensional
Modelling of the Shear-Clinching Process.” ESAFORM 2021, 2021. https://doi.org/10.25518/esaform21.1948.
ieee: D. Han, C. Yang, and G. Meschut, “A method for three-dimensional modelling
of the shear-clinching process,” ESAFORM 2021, 2021.
mla: Han, Daxin, et al. “A Method for Three-Dimensional Modelling of the Shear-Clinching
Process.” ESAFORM 2021, 2021, doi:10.25518/esaform21.1948.
short: D. Han, C. Yang, G. Meschut, ESAFORM 2021 (2021).
date_created: 2021-04-21T06:22:10Z
date_updated: 2022-01-06T06:55:10Z
department:
- _id: '157'
doi: 10.25518/esaform21.1948
language:
- iso: eng
publication: ESAFORM 2021
publication_status: published
status: public
title: A method for three-dimensional modelling of the shear-clinching process
type: journal_article
user_id: '36544'
year: '2021'
...
---
_id: '21716'
author:
- first_name: Tobias
full_name: Schmolke, Tobias
id: '44759'
last_name: Schmolke
- first_name: Christopher
full_name: Krüger, Christopher
last_name: Krüger
- first_name: David
full_name: Merdivan, David
last_name: Merdivan
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Peter
full_name: Urban, Peter
last_name: Urban
citation:
ama: 'Schmolke T, Krüger C, Merdivan D, Meschut G, Urban P. Development of a Leak
Test Method for the Joining technology of Functionally Integrated Lightweight
Battery Housings for Electric Vehicles. In: ; 2021.'
apa: Schmolke, T., Krüger, C., Merdivan, D., Meschut, G., & Urban, P. (2021).
Development of a Leak Test Method for the Joining technology of Functionally Integrated
Lightweight Battery Housings for Electric Vehicles. Presented at the Joining in
Car Body Engineering 2021, Bad Nauheim.
bibtex: '@inproceedings{Schmolke_Krüger_Merdivan_Meschut_Urban_2021, title={Development
of a Leak Test Method for the Joining technology of Functionally Integrated Lightweight
Battery Housings for Electric Vehicles}, author={Schmolke, Tobias and Krüger,
Christopher and Merdivan, David and Meschut, Gerson and Urban, Peter}, year={2021}
}'
chicago: Schmolke, Tobias, Christopher Krüger, David Merdivan, Gerson Meschut, and
Peter Urban. “Development of a Leak Test Method for the Joining Technology of
Functionally Integrated Lightweight Battery Housings for Electric Vehicles,” 2021.
ieee: T. Schmolke, C. Krüger, D. Merdivan, G. Meschut, and P. Urban, “Development
of a Leak Test Method for the Joining technology of Functionally Integrated Lightweight
Battery Housings for Electric Vehicles,” presented at the Joining in Car Body
Engineering 2021, Bad Nauheim, 2021.
mla: Schmolke, Tobias, et al. Development of a Leak Test Method for the Joining
Technology of Functionally Integrated Lightweight Battery Housings for Electric
Vehicles. 2021.
short: 'T. Schmolke, C. Krüger, D. Merdivan, G. Meschut, P. Urban, in: 2021.'
conference:
end_date: 2021-04-22
location: Bad Nauheim
name: Joining in Car Body Engineering 2021
start_date: 2021-04-19
date_created: 2021-04-22T10:09:03Z
date_updated: 2022-01-06T06:55:11Z
department:
- _id: '157'
language:
- iso: eng
status: public
title: Development of a Leak Test Method for the Joining technology of Functionally
Integrated Lightweight Battery Housings for Electric Vehicles
type: conference
user_id: '44759'
year: '2021'
...
---
_id: '21717'
author:
- first_name: Tobias
full_name: Schmolke, Tobias
id: '44759'
last_name: Schmolke
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Dennis
full_name: Meinderink, Dennis
id: '32378'
last_name: Meinderink
orcid: 0000-0002-2755-6514
- first_name: 'Leon '
full_name: 'Koch, Leon '
last_name: Koch
- first_name: Christoph
full_name: Ebbert, Christoph
id: '7266'
last_name: Ebbert
- first_name: Guido
full_name: Grundmeier, Guido
id: '194'
last_name: Grundmeier
citation:
ama: 'Schmolke T, Teutenberg D, Meschut G, et al. Entwicklung einer Methode zur
Bewertung einer stahlintensiven Mischbau-Klebverbindung eines Batteriegehäuses
gegenüber mechanischer und medialer Belastung und Berücksichtigung der Interphasenstruktur.
In: DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V., ed. ;
2021.'
apa: Schmolke, T., Teutenberg, D., Meschut, G., Meinderink, D., Koch, L., Ebbert,
C., & Grundmeier, G. (2021). Entwicklung einer Methode zur Bewertung einer
stahlintensiven Mischbau-Klebverbindung eines Batteriegehäuses gegenüber mechanischer
und medialer Belastung und Berücksichtigung der Interphasenstruktur. In DECHEMA,
Gesellschaft für Chemische Technik und Biotechnologie e.V. (Ed.). Presented at
the 21. Kolloquium Gemeinsame Forschung in der Klebtechnik , Online Event.
bibtex: '@inproceedings{Schmolke_Teutenberg_Meschut_Meinderink_Koch_Ebbert_Grundmeier_2021,
title={Entwicklung einer Methode zur Bewertung einer stahlintensiven Mischbau-Klebverbindung
eines Batteriegehäuses gegenüber mechanischer und medialer Belastung und Berücksichtigung
der Interphasenstruktur}, author={Schmolke, Tobias and Teutenberg, Dominik and
Meschut, Gerson and Meinderink, Dennis and Koch, Leon and Ebbert, Christoph and
Grundmeier, Guido}, editor={DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie
e.V.Editor}, year={2021} }'
chicago: Schmolke, Tobias, Dominik Teutenberg, Gerson Meschut, Dennis Meinderink,
Leon Koch, Christoph Ebbert, and Guido Grundmeier. “Entwicklung Einer Methode
Zur Bewertung Einer Stahlintensiven Mischbau-Klebverbindung Eines Batteriegehäuses
Gegenüber Mechanischer Und Medialer Belastung Und Berücksichtigung Der Interphasenstruktur.”
edited by DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V.,
2021.
ieee: T. Schmolke et al., “Entwicklung einer Methode zur Bewertung einer
stahlintensiven Mischbau-Klebverbindung eines Batteriegehäuses gegenüber mechanischer
und medialer Belastung und Berücksichtigung der Interphasenstruktur,” presented
at the 21. Kolloquium Gemeinsame Forschung in der Klebtechnik , Online Event,
2021.
mla: Schmolke, Tobias, et al. Entwicklung Einer Methode Zur Bewertung Einer Stahlintensiven
Mischbau-Klebverbindung Eines Batteriegehäuses Gegenüber Mechanischer Und Medialer
Belastung Und Berücksichtigung Der Interphasenstruktur. Edited by DECHEMA,
Gesellschaft für Chemische Technik und Biotechnologie e.V., 2021.
short: 'T. Schmolke, D. Teutenberg, G. Meschut, D. Meinderink, L. Koch, C. Ebbert,
G. Grundmeier, in: DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie
e.V. (Ed.), 2021.'
conference:
end_date: 2021-03-03
location: Online Event
name: '21. Kolloquium Gemeinsame Forschung in der Klebtechnik '
start_date: 2021-03-02
corporate_editor:
- DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V.
date_created: 2021-04-22T10:19:48Z
date_updated: 2022-01-06T06:55:11Z
department:
- _id: '157'
- _id: '302'
language:
- iso: eng
status: public
title: Entwicklung einer Methode zur Bewertung einer stahlintensiven Mischbau-Klebverbindung
eines Batteriegehäuses gegenüber mechanischer und medialer Belastung und Berücksichtigung
der Interphasenstruktur
type: conference
user_id: '7266'
year: '2021'
...
---
_id: '21718'
author:
- first_name: Elena
full_name: Fischer, Elena
id: '14068'
last_name: Fischer
- first_name: Tobias
full_name: Schmolke, Tobias
id: '44759'
last_name: Schmolke
- first_name: Nick
full_name: Chudalla, Nick
id: '41235'
last_name: Chudalla
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Fischer E, Schmolke T, Chudalla N, Teutenberg D, Meschut G. Auslegungsmethode
für Klebverbindungen mit KTL-beschichteten Fügeteilen und polymeren, faserverstärkten
Werkstoffen – Kleben auf KTL. In: DECHEMA, Gesellschaft für Chemische Technik
und Biotechnologie e.V, ed. ; 2021.'
apa: Fischer, E., Schmolke, T., Chudalla, N., Teutenberg, D., & Meschut, G.
(2021). Auslegungsmethode für Klebverbindungen mit KTL-beschichteten Fügeteilen
und polymeren, faserverstärkten Werkstoffen – Kleben auf KTL. In DECHEMA, Gesellschaft
für Chemische Technik und Biotechnologie e.V (Ed.). Presented at the 21. Kolloquium
Gemeinsame Forschung in der Klebtechnik , Online Event.
bibtex: '@inproceedings{Fischer_Schmolke_Chudalla_Teutenberg_Meschut_2021, title={Auslegungsmethode
für Klebverbindungen mit KTL-beschichteten Fügeteilen und polymeren, faserverstärkten
Werkstoffen – Kleben auf KTL}, author={Fischer, Elena and Schmolke, Tobias and
Chudalla, Nick and Teutenberg, Dominik and Meschut, Gerson}, editor={ DECHEMA,
Gesellschaft für Chemische Technik und Biotechnologie e.VEditor}, year={2021}
}'
chicago: Fischer, Elena, Tobias Schmolke, Nick Chudalla, Dominik Teutenberg, and
Gerson Meschut. “Auslegungsmethode Für Klebverbindungen Mit KTL-Beschichteten
Fügeteilen Und Polymeren, Faserverstärkten Werkstoffen – Kleben Auf KTL.” edited
by DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V, 2021.
ieee: E. Fischer, T. Schmolke, N. Chudalla, D. Teutenberg, and G. Meschut, “Auslegungsmethode
für Klebverbindungen mit KTL-beschichteten Fügeteilen und polymeren, faserverstärkten
Werkstoffen – Kleben auf KTL,” presented at the 21. Kolloquium Gemeinsame Forschung
in der Klebtechnik , Online Event, 2021.
mla: Fischer, Elena, et al. Auslegungsmethode Für Klebverbindungen Mit KTL-Beschichteten
Fügeteilen Und Polymeren, Faserverstärkten Werkstoffen – Kleben Auf KTL. Edited
by DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V, 2021.
short: 'E. Fischer, T. Schmolke, N. Chudalla, D. Teutenberg, G. Meschut, in: DECHEMA,
Gesellschaft für Chemische Technik und Biotechnologie e.V (Ed.), 2021.'
conference:
end_date: 2021-03-03
location: Online Event
name: ' 21. Kolloquium Gemeinsame Forschung in der Klebtechnik '
start_date: 2021-03-02
corporate_editor:
- ' DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V'
date_created: 2021-04-22T10:25:28Z
date_updated: 2022-01-06T06:55:11Z
department:
- _id: '157'
language:
- iso: eng
status: public
title: Auslegungsmethode für Klebverbindungen mit KTL-beschichteten Fügeteilen und
polymeren, faserverstärkten Werkstoffen – Kleben auf KTL
type: conference
user_id: '44759'
year: '2021'
...
---
_id: '21723'
author:
- first_name: Stefanie Jutta Marianne
full_name: Müller, Stefanie Jutta Marianne
id: '70858'
last_name: Müller
- first_name: Anna
full_name: Buchholz, Anna
last_name: Buchholz
- first_name: Beate
full_name: Flath, Beate
last_name: Flath
- first_name: Dennis
full_name: Kundisch, Dennis
id: '21117'
last_name: Kundisch
- first_name: Maryam
full_name: Momen Pour Tafreshi, Maryam
last_name: Momen Pour Tafreshi
citation:
ama: 'Müller SJM, Buchholz A, Flath B, Kundisch D, Momen Pour Tafreshi M. The Agony
of Finding the Right Pricing Policy for Cultural Institutions: Addressing Economic
Viability and Cultural Participation through Innovative Pricing. In: ; 2021.'
apa: 'Müller, S. J. M., Buchholz, A., Flath, B., Kundisch, D., & Momen Pour
Tafreshi, M. (2021). The Agony of Finding the Right Pricing Policy for Cultural
Institutions: Addressing Economic Viability and Cultural Participation through
Innovative Pricing. Presented at the 21st International Conference on Cultural
Economics, ACEI2020, Virtual Conference/Workshop.'
bibtex: '@inproceedings{Müller_Buchholz_Flath_Kundisch_Momen Pour Tafreshi_2021,
title={The Agony of Finding the Right Pricing Policy for Cultural Institutions:
Addressing Economic Viability and Cultural Participation through Innovative Pricing},
author={Müller, Stefanie Jutta Marianne and Buchholz, Anna and Flath, Beate and
Kundisch, Dennis and Momen Pour Tafreshi, Maryam}, year={2021} }'
chicago: 'Müller, Stefanie Jutta Marianne, Anna Buchholz, Beate Flath, Dennis Kundisch,
and Maryam Momen Pour Tafreshi. “The Agony of Finding the Right Pricing Policy
for Cultural Institutions: Addressing Economic Viability and Cultural Participation
through Innovative Pricing,” 2021.'
ieee: 'S. J. M. Müller, A. Buchholz, B. Flath, D. Kundisch, and M. Momen Pour Tafreshi,
“The Agony of Finding the Right Pricing Policy for Cultural Institutions: Addressing
Economic Viability and Cultural Participation through Innovative Pricing,” presented
at the 21st International Conference on Cultural Economics, ACEI2020, Virtual
Conference/Workshop, 2021.'
mla: 'Müller, Stefanie Jutta Marianne, et al. The Agony of Finding the Right
Pricing Policy for Cultural Institutions: Addressing Economic Viability and Cultural
Participation through Innovative Pricing. 2021.'
short: 'S.J.M. Müller, A. Buchholz, B. Flath, D. Kundisch, M. Momen Pour Tafreshi,
in: 2021.'
conference:
location: Virtual Conference/Workshop
name: 21st International Conference on Cultural Economics, ACEI2020
date_created: 2021-04-23T12:15:34Z
date_updated: 2022-01-06T06:55:12Z
department:
- _id: '276'
language:
- iso: eng
project:
- _id: '95'
grant_number: 01UG1917
name: Steigerung der kulturellen Teilhabe mittels innovativer und ökonomisch nachhaltiger
Preiskonzepte
status: public
title: 'The Agony of Finding the Right Pricing Policy for Cultural Institutions: Addressing
Economic Viability and Cultural Participation through Innovative Pricing'
type: conference_abstract
user_id: '16205'
year: '2021'
...
---
_id: '21727'
abstract:
- lang: eng
text: 'Platform-based business models underlie the success of many of today’s largest,
fastest-growing, and most disruptive companies. Despite the success of prominent
examples, such as Uber and Airbnb, creating a profitable platform ecosystem presents
a key challenge for many companies across all industries. Although research provides
knowledge about platforms’ different value drivers (e.g., network effects), companies
that seek to transform their current business model into a platform-based one
lack an artifact to reduce knowledge boundaries, collaborate effectively, and
cope with the complexities and dynamics of platform ecosystems. We address this
challenge by developing two artifacts and combining research from variability
modeling, business model dependencies, and system dynamics. This paper presents
a design science research approach to develop the platform ecosystem modeling
language and the platform ecosystem development tool that support researcher and
practitioner by visualizing and simulating platform ecosystems. '
author:
- first_name: Christian
full_name: Vorbohle, Christian
id: '29951'
last_name: Vorbohle
- first_name: Sebastian
full_name: Gottschalk, Sebastian
id: '47208'
last_name: Gottschalk
citation:
ama: 'Vorbohle C, Gottschalk S. Towards Visualizing and Simulating Business Models
in Dynamic Platform Ecosystems . In: Proceedings of the 29th European Conference
on Information Systems (ECIS). AIS.'
apa: 'Vorbohle, C., & Gottschalk, S. (n.d.). Towards Visualizing and Simulating
Business Models in Dynamic Platform Ecosystems . In Proceedings of the 29th
European Conference on Information Systems (ECIS). Virtual Conference/Workshop:
AIS.'
bibtex: '@inproceedings{Vorbohle_Gottschalk, title={Towards Visualizing and Simulating
Business Models in Dynamic Platform Ecosystems }, booktitle={Proceedings of the
29th European Conference on Information Systems (ECIS)}, publisher={AIS}, author={Vorbohle,
Christian and Gottschalk, Sebastian} }'
chicago: Vorbohle, Christian, and Sebastian Gottschalk. “Towards Visualizing and
Simulating Business Models in Dynamic Platform Ecosystems .” In Proceedings
of the 29th European Conference on Information Systems (ECIS). AIS, n.d.
ieee: C. Vorbohle and S. Gottschalk, “Towards Visualizing and Simulating Business
Models in Dynamic Platform Ecosystems ,” in Proceedings of the 29th European
Conference on Information Systems (ECIS), Virtual Conference/Workshop.
mla: Vorbohle, Christian, and Sebastian Gottschalk. “Towards Visualizing and Simulating
Business Models in Dynamic Platform Ecosystems .” Proceedings of the 29th European
Conference on Information Systems (ECIS), AIS.
short: 'C. Vorbohle, S. Gottschalk, in: Proceedings of the 29th European Conference
on Information Systems (ECIS), AIS, n.d.'
conference:
location: Virtual Conference/Workshop
name: 29th European Conference on Information Systems (ECIS)
date_created: 2021-04-23T13:38:54Z
date_updated: 2022-01-06T06:55:12Z
department:
- _id: '66'
- _id: '534'
- _id: '276'
keyword:
- Platform Ecosystems
- Platform Ecosystem Modeling Language
- Platform Ecosystem Development Tool
- Business Models
- Design Science
language:
- iso: eng
project:
- _id: '1'
name: SFB 901
- _id: '4'
name: SFB 901 - Project Area C
- _id: '17'
name: SFB 901 - Subproject C5
publication: Proceedings of the 29th European Conference on Information Systems (ECIS)
publication_status: accepted
publisher: AIS
status: public
title: 'Towards Visualizing and Simulating Business Models in Dynamic Platform Ecosystems '
type: conference
user_id: '47208'
year: '2021'
...
---
_id: '21799'
author:
- first_name: K.
full_name: Kutzner, K.
last_name: Kutzner
- first_name: M.
full_name: Stadtländer, M.
last_name: Stadtländer
- first_name: Janina
full_name: Seutter, Janina
id: '64464'
last_name: Seutter
- first_name: Dennis
full_name: Kundisch, Dennis
id: '21117'
last_name: Kundisch
- first_name: R.
full_name: Knackstedt, R.
last_name: Knackstedt
citation:
ama: 'Kutzner K, Stadtländer M, Seutter J, Kundisch D, Knackstedt R. ”Sorry, Too
Much Information” Designing Online Review Systems that Support Information Search
and Processing. In: Proceedings of the 29th European Conference on Information
Systems (ECIS). ; 2021.'
apa: Kutzner, K., Stadtländer, M., Seutter, J., Kundisch, D., & Knackstedt,
R. (2021). ”Sorry, Too Much Information” Designing Online Review Systems that
Support Information Search and Processing. In Proceedings of the 29th European
Conference on Information Systems (ECIS). Virtual Conference/Workshop.
bibtex: '@inproceedings{Kutzner_Stadtländer_Seutter_Kundisch_Knackstedt_2021, title={”Sorry,
Too Much Information” Designing Online Review Systems that Support Information
Search and Processing}, booktitle={Proceedings of the 29th European Conference
on Information Systems (ECIS)}, author={Kutzner, K. and Stadtländer, M. and Seutter,
Janina and Kundisch, Dennis and Knackstedt, R.}, year={2021} }'
chicago: Kutzner, K., M. Stadtländer, Janina Seutter, Dennis Kundisch, and R. Knackstedt.
“”Sorry, Too Much Information” Designing Online Review Systems That Support Information
Search and Processing.” In Proceedings of the 29th European Conference on Information
Systems (ECIS), 2021.
ieee: K. Kutzner, M. Stadtländer, J. Seutter, D. Kundisch, and R. Knackstedt, “”Sorry,
Too Much Information” Designing Online Review Systems that Support Information
Search and Processing,” in Proceedings of the 29th European Conference on Information
Systems (ECIS), Virtual Conference/Workshop, 2021.
mla: Kutzner, K., et al. “”Sorry, Too Much Information” Designing Online Review
Systems That Support Information Search and Processing.” Proceedings of the
29th European Conference on Information Systems (ECIS), 2021.
short: 'K. Kutzner, M. Stadtländer, J. Seutter, D. Kundisch, R. Knackstedt, in:
Proceedings of the 29th European Conference on Information Systems (ECIS), 2021.'
conference:
location: Virtual Conference/Workshop
name: 29th European Conference on Information Systems (ECIS)
date_created: 2021-04-26T10:46:22Z
date_updated: 2022-01-06T06:55:13Z
department:
- _id: '276'
language:
- iso: eng
project:
- _id: '2'
name: SFB 901 - Project Area A
- _id: '8'
name: SFB 901 - Subproject A4
- _id: '1'
name: SFB 901
publication: Proceedings of the 29th European Conference on Information Systems (ECIS)
status: public
title: ”Sorry, Too Much Information” Designing Online Review Systems that Support
Information Search and Processing
type: conference
user_id: '477'
year: '2021'
...
---
_id: '21800'
alternative_title:
- Grundlagen der Fertigung, Charakterisierung und Auslegung
author:
- first_name: Sascha
full_name: Sander, Sascha
id: '23175'
last_name: Sander
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: Sander S, Bobbert M, Meschut G. Intrinsische Hybridverbunde für Leichtbautragstrukturen.
Springer Vieweg; 2021.
apa: Sander, S., Bobbert, M., & Meschut, G. (2021). Intrinsische Hybridverbunde
für Leichtbautragstrukturen. Springer Vieweg.
bibtex: '@book{Sander_Bobbert_Meschut_2021, title={Intrinsische Hybridverbunde
für Leichtbautragstrukturen}, publisher={Springer Vieweg}, author={Sander, Sascha
and Bobbert, Mathias and Meschut, Gerson}, year={2021} }'
chicago: Sander, Sascha, Mathias Bobbert, and Gerson Meschut. Intrinsische Hybridverbunde
für Leichtbautragstrukturen. Springer Vieweg, 2021.
ieee: S. Sander, M. Bobbert, and G. Meschut, Intrinsische Hybridverbunde für
Leichtbautragstrukturen. Springer Vieweg, 2021.
mla: Sander, Sascha, et al. Intrinsische Hybridverbunde für Leichtbautragstrukturen.
Springer Vieweg, 2021.
short: S. Sander, M. Bobbert, G. Meschut, Intrinsische Hybridverbunde für Leichtbautragstrukturen,
Springer Vieweg, 2021.
date_created: 2021-04-26T13:21:58Z
date_updated: 2022-01-06T06:55:14Z
department:
- _id: '157'
language:
- iso: ger
page: '332'
publication_identifier:
eisbn:
- 978-3-662-62833-1
isbn:
- 978-3-662-62832-4
publication_status: published
publisher: Springer Vieweg
status: public
title: Intrinsische Hybridverbunde für Leichtbautragstrukturen
type: book
user_id: '23175'
year: '2021'
...
---
_id: '21808'
abstract:
- lang: eng
text: "Modern services consist of interconnected components,e.g., microservices
in a service mesh or machine learning functions in a pipeline. These services
can scale and run across multiple network nodes on demand. To process incoming
traffic, service components have to be instantiated and traffic assigned to these
instances, taking capacities, changing demands, and Quality of Service (QoS) requirements
into account. This challenge is usually solved with custom approaches designed
by experts. While this typically works well for the considered scenario, the models
often rely on unrealistic assumptions or on knowledge that is not available in
practice (e.g., a priori knowledge).\r\n\r\nWe propose DeepCoord, a novel deep
reinforcement learning approach that learns how to best coordinate services and
is geared towards realistic assumptions. It interacts with the network and relies
on available, possibly delayed monitoring information. Rather than defining a
complex model or an algorithm on how to achieve an objective, our model-free approach
adapts to various objectives and traffic patterns. An agent is trained offline
without expert knowledge and then applied online with minimal overhead. Compared
to a state-of-the-art heuristic, DeepCoord significantly improves flow throughput
(up to 76%) and overall network utility (more than 2x) on realworld network topologies
and traffic traces. It also supports optimizing multiple, possibly competing objectives,
learns to respect QoS requirements, generalizes to scenarios with unseen, stochastic
traffic, and scales to large real-world networks. For reproducibility and reuse,
our code is publicly available."
article_type: original
author:
- first_name: Stefan Balthasar
full_name: Schneider, Stefan Balthasar
id: '35343'
last_name: Schneider
orcid: 0000-0001-8210-4011
- first_name: Ramin
full_name: Khalili, Ramin
last_name: Khalili
- first_name: Adnan
full_name: Manzoor, Adnan
last_name: Manzoor
- first_name: Haydar
full_name: Qarawlus, Haydar
last_name: Qarawlus
- first_name: Rafael
full_name: Schellenberg, Rafael
last_name: Schellenberg
- first_name: Holger
full_name: Karl, Holger
id: '126'
last_name: Karl
- first_name: Artur
full_name: Hecker, Artur
last_name: Hecker
citation:
ama: Schneider SB, Khalili R, Manzoor A, et al. Self-Learning Multi-Objective Service
Coordination Using Deep Reinforcement Learning. Transactions on Network and
Service Management. 2021. doi:10.1109/TNSM.2021.3076503
apa: Schneider, S. B., Khalili, R., Manzoor, A., Qarawlus, H., Schellenberg, R.,
Karl, H., & Hecker, A. (2021). Self-Learning Multi-Objective Service Coordination
Using Deep Reinforcement Learning. Transactions on Network and Service Management.
https://doi.org/10.1109/TNSM.2021.3076503
bibtex: '@article{Schneider_Khalili_Manzoor_Qarawlus_Schellenberg_Karl_Hecker_2021,
title={Self-Learning Multi-Objective Service Coordination Using Deep Reinforcement
Learning}, DOI={10.1109/TNSM.2021.3076503},
journal={Transactions on Network and Service Management}, publisher={IEEE}, author={Schneider,
Stefan Balthasar and Khalili, Ramin and Manzoor, Adnan and Qarawlus, Haydar and
Schellenberg, Rafael and Karl, Holger and Hecker, Artur}, year={2021} }'
chicago: Schneider, Stefan Balthasar, Ramin Khalili, Adnan Manzoor, Haydar Qarawlus,
Rafael Schellenberg, Holger Karl, and Artur Hecker. “Self-Learning Multi-Objective
Service Coordination Using Deep Reinforcement Learning.” Transactions on Network
and Service Management, 2021. https://doi.org/10.1109/TNSM.2021.3076503.
ieee: S. B. Schneider et al., “Self-Learning Multi-Objective Service Coordination
Using Deep Reinforcement Learning,” Transactions on Network and Service Management,
2021.
mla: Schneider, Stefan Balthasar, et al. “Self-Learning Multi-Objective Service
Coordination Using Deep Reinforcement Learning.” Transactions on Network and
Service Management, IEEE, 2021, doi:10.1109/TNSM.2021.3076503.
short: S.B. Schneider, R. Khalili, A. Manzoor, H. Qarawlus, R. Schellenberg, H.
Karl, A. Hecker, Transactions on Network and Service Management (2021).
date_created: 2021-04-27T08:04:16Z
date_updated: 2022-01-06T06:55:15Z
ddc:
- '000'
department:
- _id: '75'
doi: 10.1109/TNSM.2021.3076503
file:
- access_level: open_access
content_type: application/pdf
creator: stschn
date_created: 2021-04-27T08:01:26Z
date_updated: 2021-04-27T08:01:26Z
description: Author version of the accepted paper
file_id: '21809'
file_name: ris-accepted-version.pdf
file_size: 4172270
relation: main_file
file_date_updated: 2021-04-27T08:01:26Z
has_accepted_license: '1'
keyword:
- network management
- service management
- coordination
- reinforcement learning
- self-learning
- self-adaptation
- multi-objective
language:
- iso: eng
oa: '1'
project:
- _id: '1'
name: SFB 901
- _id: '4'
name: SFB 901 - Project Area C
- _id: '16'
name: SFB 901 - Subproject C4
publication: Transactions on Network and Service Management
publisher: IEEE
status: public
title: Self-Learning Multi-Objective Service Coordination Using Deep Reinforcement
Learning
type: journal_article
user_id: '35343'
year: '2021'
...
---
_id: '21812'
author:
- first_name: Christian
full_name: Vorbohle, Christian
id: '29951'
last_name: Vorbohle
- first_name: Daniel
full_name: Szopinski, Daniel
id: '36372'
last_name: Szopinski
- first_name: Dennis
full_name: Kundisch, Dennis
id: '21117'
last_name: Kundisch
citation:
ama: 'Vorbohle C, Szopinski D, Kundisch D. Toward Understanding the Complexity of
Business Models – A Taxonomy of Business Model Dependencies. In: Proceedings
of the 29th European Conference on Information Systems (ECIS). ; 2021.'
apa: Vorbohle, C., Szopinski, D., & Kundisch, D. (2021). Toward Understanding
the Complexity of Business Models – A Taxonomy of Business Model Dependencies.
In Proceedings of the 29th European Conference on Information Systems (ECIS).
Virtual Conference/Workshop.
bibtex: '@inproceedings{Vorbohle_Szopinski_Kundisch_2021, title={Toward Understanding
the Complexity of Business Models – A Taxonomy of Business Model Dependencies},
booktitle={Proceedings of the 29th European Conference on Information Systems
(ECIS)}, author={Vorbohle, Christian and Szopinski, Daniel and Kundisch, Dennis},
year={2021} }'
chicago: Vorbohle, Christian, Daniel Szopinski, and Dennis Kundisch. “Toward Understanding
the Complexity of Business Models – A Taxonomy of Business Model Dependencies.”
In Proceedings of the 29th European Conference on Information Systems (ECIS),
2021.
ieee: C. Vorbohle, D. Szopinski, and D. Kundisch, “Toward Understanding the Complexity
of Business Models – A Taxonomy of Business Model Dependencies,” in Proceedings
of the 29th European Conference on Information Systems (ECIS), Virtual Conference/Workshop,
2021.
mla: Vorbohle, Christian, et al. “Toward Understanding the Complexity of Business
Models – A Taxonomy of Business Model Dependencies.” Proceedings of the 29th
European Conference on Information Systems (ECIS), 2021.
short: 'C. Vorbohle, D. Szopinski, D. Kundisch, in: Proceedings of the 29th European
Conference on Information Systems (ECIS), 2021.'
conference:
location: Virtual Conference/Workshop
name: 29th European Conference on Information Systems (ECIS)
date_created: 2021-04-28T08:22:41Z
date_updated: 2022-01-06T06:55:15Z
department:
- _id: '276'
language:
- iso: eng
project:
- _id: '1'
name: SFB 901
- _id: '4'
name: SFB 901 - Project Area C
- _id: '17'
name: SFB 901 - Subproject C5
publication: Proceedings of the 29th European Conference on Information Systems (ECIS)
status: public
title: Toward Understanding the Complexity of Business Models – A Taxonomy of Business
Model Dependencies
type: conference
user_id: '477'
year: '2021'
...
---
_id: '21815'
abstract:
- lang: ger
text: Sowohl Berufsethos als auch Berufswahlmotivation tragen zu relevanten lern-,
leistungs- und laufbahnbedingenden Prozessen eines Individuums bei und prägen
dessen Lebensverlauf wesentlich. Während die Berufswahlmotivation bereits verstärkt
im wirtschaftspädagogischen Kontext untersucht wurde, existieren zum Berufsethos
von Wirtschaftspädagog*innen nur vereinzelt empirische Studien. So ist beispielsweise
wenig darüber bekannt, wie das Berufsethos von Wirtschaftspädagog*innen in der
Ausbildungsphase ausgeprägt ist. Auch die Erforschung des Zusammenhangs zwischen
den Konstrukten des Berufsethos und der Berufswahlmotivation blieb bisher unbeachtet.
In diesem Beitrag wird entsprechend dieses Forschungsdesiderats untersucht, wie
das anfänglich ausgebildete Berufsethos von Wirtschaftspädagogikstudierenden in
der universitären Ausbildung ausgeprägt ist, ob sich die Ausprägung nach dem angegebenen
Berufswunsch der Studierenden unterscheidet und inwiefern das anfänglich ausgeprägte
Berufsethos mit der Berufswahlmotivation von Studierenden zusammenhängt. Dafür
wurden im Wintersemester 2019/20 an zwölf deutschen Universitäten insgesamt 879
Wirtschaftspädagogikstudierende schriftlich befragt. Die Ergebnisse zeigen, dass
das anfängliche Berufsethos der Befragten bereits in der universitären Ausbildungsphase
relativ stark ausgeprägt ist. Weiterhin ist zu erkennen, dass das Berufsethos
bei angehenden Wirtschaftspädagog*innen, die den Berufswunsch Lehrkraft haben,
ausgeprägter ist als bei Wirtschaftspädagogikstudierenden, die eine Tätigkeit
außerhalb des Schuldienstes anstreben bzw. noch unentschlossen sind. Letztlich
kann aufgezeigt werden, dass grundsätzlich positive Zusammenhänge zwischen dem
anfänglich ausgeprägten Berufsethos und der Berufswahlmotivation von angehenden
Wirtschaftspädagog*innen bestehen.
article_type: original
author:
- first_name: Michael
full_name: Goller, Michael
id: '30984'
last_name: Goller
orcid: 0000-0002-2820-9178
- first_name: Simone
full_name: Ziegler, Simone
last_name: Ziegler
citation:
ama: Goller M, Ziegler S. Zum Zusammenhang von Berufsethos und der Berufswahlmotivation
angehender Wirtschaftspädagog*innen. bwp@ Spezial. 2021;18:1-28.
apa: Goller, M., & Ziegler, S. (2021). Zum Zusammenhang von Berufsethos und
der Berufswahlmotivation angehender Wirtschaftspädagog*innen. bwp@ Spezial,
18, 1–28.
bibtex: '@article{Goller_Ziegler_2021, title={Zum Zusammenhang von Berufsethos und
der Berufswahlmotivation angehender Wirtschaftspädagog*innen}, volume={18}, journal={bwp@
Spezial}, author={Goller, Michael and Ziegler, Simone}, year={2021}, pages={1–28}
}'
chicago: 'Goller, Michael, and Simone Ziegler. “Zum Zusammenhang von Berufsethos
und der Berufswahlmotivation angehender Wirtschaftspädagog*innen.” bwp@ Spezial
18 (2021): 1–28.'
ieee: M. Goller and S. Ziegler, “Zum Zusammenhang von Berufsethos und der Berufswahlmotivation
angehender Wirtschaftspädagog*innen,” bwp@ Spezial, vol. 18, pp. 1–28,
2021.
mla: Goller, Michael, and Simone Ziegler. “Zum Zusammenhang von Berufsethos und
der Berufswahlmotivation angehender Wirtschaftspädagog*innen.” bwp@ Spezial,
vol. 18, 2021, pp. 1–28.
short: M. Goller, S. Ziegler, bwp@ Spezial 18 (2021) 1–28.
date_created: 2021-04-28T17:55:42Z
date_updated: 2022-01-06T06:55:15Z
ddc:
- '370'
department:
- _id: '452'
file:
- access_level: open_access
content_type: application/pdf
creator: mgoller
date_created: 2021-04-28T17:53:45Z
date_updated: 2021-04-28T18:01:59Z
file_id: '21816'
file_name: ziegler_goller_spezial18.pdf
file_size: 727443
relation: main_file
file_date_updated: 2021-04-28T18:01:59Z
has_accepted_license: '1'
intvolume: ' 18'
keyword:
- Berufsethos
- Berufswahlmotivation
- Wirtschaftspädagogik
- Studierende
language:
- iso: ger
main_file_link:
- open_access: '1'
url: https://www.bwpat.de/spezial18/ziegler_goller_spezial18.pdf
oa: '1'
page: 1-28
publication: bwp@ Spezial
publication_identifier:
issn:
- 1618-8543
publication_status: published
quality_controlled: '1'
status: public
title: Zum Zusammenhang von Berufsethos und der Berufswahlmotivation angehender Wirtschaftspädagog*innen
type: journal_article
user_id: '30984'
volume: 18
year: '2021'
...
---
_id: '21820'
abstract:
- lang: eng
text: The reduction of high-dimensional systems to effective models on a
smaller set of variables is an essential task in many areas of science. For stochastic
dynamics governed by diffusion processes, a general procedure to find effective
equations is the conditioning approach. In this paper, we are interested in the
spectrum of the generator of the resulting effective dynamics, and how it compares
to the spectrum of the full generator. We prove a new relative error bound in
terms of the eigenfunction approximation error for reversible systems. We also
present numerical examples indicating that, if Kramers–Moyal (KM) type approximations
are used to compute the spectrum of the reduced generator, it seems largely insensitive
to the time window used for the KM estimators. We analyze the implications of
these observations for systems driven by underdamped Langevin dynamics, and show
how meaningful effective dynamics can be defined in this setting.
article_number: '134'
author:
- first_name: Feliks
full_name: Nüske, Feliks
id: '81513'
last_name: Nüske
orcid: 0000-0003-2444-7889
- first_name: Péter
full_name: Koltai, Péter
last_name: Koltai
- first_name: Lorenzo
full_name: Boninsegna, Lorenzo
last_name: Boninsegna
- first_name: Cecilia
full_name: Clementi, Cecilia
last_name: Clementi
citation:
ama: Nüske F, Koltai P, Boninsegna L, Clementi C. Spectral Properties of Effective
Dynamics from Conditional Expectations. Entropy. 2021. doi:10.3390/e23020134
apa: Nüske, F., Koltai, P., Boninsegna, L., & Clementi, C. (2021). Spectral
Properties of Effective Dynamics from Conditional Expectations. Entropy.
https://doi.org/10.3390/e23020134
bibtex: '@article{Nüske_Koltai_Boninsegna_Clementi_2021, title={Spectral Properties
of Effective Dynamics from Conditional Expectations}, DOI={10.3390/e23020134},
number={134}, journal={Entropy}, author={Nüske, Feliks and Koltai, Péter and Boninsegna,
Lorenzo and Clementi, Cecilia}, year={2021} }'
chicago: Nüske, Feliks, Péter Koltai, Lorenzo Boninsegna, and Cecilia Clementi.
“Spectral Properties of Effective Dynamics from Conditional Expectations.” Entropy,
2021. https://doi.org/10.3390/e23020134.
ieee: F. Nüske, P. Koltai, L. Boninsegna, and C. Clementi, “Spectral Properties
of Effective Dynamics from Conditional Expectations,” Entropy, 2021.
mla: Nüske, Feliks, et al. “Spectral Properties of Effective Dynamics from Conditional
Expectations.” Entropy, 134, 2021, doi:10.3390/e23020134.
short: F. Nüske, P. Koltai, L. Boninsegna, C. Clementi, Entropy (2021).
date_created: 2021-04-28T18:07:56Z
date_updated: 2022-01-06T06:55:16Z
department:
- _id: '101'
doi: 10.3390/e23020134
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.mdpi.com/1099-4300/23/2/134
oa: '1'
publication: Entropy
publication_identifier:
issn:
- 1099-4300
publication_status: published
status: public
title: Spectral Properties of Effective Dynamics from Conditional Expectations
type: journal_article
user_id: '81513'
year: '2021'
...
---
_id: '21823'
article_number: '117182'
author:
- first_name: Daxin
full_name: Han, Daxin
id: '36544'
last_name: Han
- first_name: Keke
full_name: Yang, Keke
last_name: Yang
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: Han D, Yang K, Meschut G. Mechanical joining of glass fibre reinforced polymer
(GFRP) through an innovative solid self-piercing rivet. Journal of Materials
Processing Technology. 2021. doi:10.1016/j.jmatprotec.2021.117182
apa: Han, D., Yang, K., & Meschut, G. (2021). Mechanical joining of glass fibre
reinforced polymer (GFRP) through an innovative solid self-piercing rivet. Journal
of Materials Processing Technology. https://doi.org/10.1016/j.jmatprotec.2021.117182
bibtex: '@article{Han_Yang_Meschut_2021, title={Mechanical joining of glass fibre
reinforced polymer (GFRP) through an innovative solid self-piercing rivet}, DOI={10.1016/j.jmatprotec.2021.117182},
number={117182}, journal={Journal of Materials Processing Technology}, author={Han,
Daxin and Yang, Keke and Meschut, Gerson}, year={2021} }'
chicago: Han, Daxin, Keke Yang, and Gerson Meschut. “Mechanical Joining of Glass
Fibre Reinforced Polymer (GFRP) through an Innovative Solid Self-Piercing Rivet.”
Journal of Materials Processing Technology, 2021. https://doi.org/10.1016/j.jmatprotec.2021.117182.
ieee: D. Han, K. Yang, and G. Meschut, “Mechanical joining of glass fibre reinforced
polymer (GFRP) through an innovative solid self-piercing rivet,” Journal of
Materials Processing Technology, 2021.
mla: Han, Daxin, et al. “Mechanical Joining of Glass Fibre Reinforced Polymer (GFRP)
through an Innovative Solid Self-Piercing Rivet.” Journal of Materials Processing
Technology, 117182, 2021, doi:10.1016/j.jmatprotec.2021.117182.
short: D. Han, K. Yang, G. Meschut, Journal of Materials Processing Technology (2021).
date_created: 2021-04-29T08:05:21Z
date_updated: 2022-01-06T06:55:17Z
department:
- _id: '157'
doi: 10.1016/j.jmatprotec.2021.117182
language:
- iso: eng
publication: Journal of Materials Processing Technology
publication_identifier:
issn:
- 0924-0136
publication_status: published
status: public
title: Mechanical joining of glass fibre reinforced polymer (GFRP) through an innovative
solid self-piercing rivet
type: journal_article
user_id: '36544'
year: '2021'
...
---
_id: '21825'
citation:
ama: 'Tönnies M, Schlieper H, eds. Gattung Und Geschlecht: Konventionen Und Transformationen
Eines Paradigmas. Vol 21. Harrassowitz; 2021.'
apa: 'Tönnies, M., & Schlieper, H. (Eds.). (2021). Gattung und Geschlecht:
Konventionen und Transformationen eines Paradigmas (Vol. 21). Harrassowitz.'
bibtex: '@book{Tönnies_Schlieper_2021, series={culturae}, title={Gattung und Geschlecht:
Konventionen und Transformationen eines Paradigmas}, volume={21}, publisher={Harrassowitz},
year={2021}, collection={culturae} }'
chicago: 'Tönnies, Merle, and Hendrick Schlieper, eds. Gattung Und Geschlecht:
Konventionen Und Transformationen Eines Paradigmas. Vol. 21. Culturae. Harrassowitz,
2021.'
ieee: 'M. Tönnies and H. Schlieper, Eds., Gattung und Geschlecht: Konventionen
und Transformationen eines Paradigmas, vol. 21. Harrassowitz, 2021.'
mla: 'Tönnies, Merle, and Hendrick Schlieper, editors. Gattung Und Geschlecht:
Konventionen Und Transformationen Eines Paradigmas. Vol. 21, Harrassowitz,
2021.'
short: 'M. Tönnies, H. Schlieper, eds., Gattung Und Geschlecht: Konventionen Und
Transformationen Eines Paradigmas, Harrassowitz, 2021.'
date_created: 2021-04-30T03:43:24Z
date_updated: 2022-01-06T06:55:17Z
department:
- _id: '36'
- _id: '1'
- _id: '380'
editor:
- first_name: Merle
full_name: Tönnies, Merle
id: '555'
last_name: Tönnies
- first_name: Hendrick
full_name: Schlieper, Hendrick
last_name: Schlieper
language:
- iso: eng
publication_status: published
publisher: Harrassowitz
series_title: culturae
status: public
title: 'Gattung und Geschlecht: Konventionen und Transformationen eines Paradigmas'
type: book_editor
user_id: '32277'
volume: '21 '
year: '2021'
...