---
_id: '34214'
abstract:
- lang: eng
text: This article presents the application and evaluation of a cantilever with
integrated sensing and actuation as part of an atomic force microscope (AFM) with
an adjustable probe direction, which is integrated into a nano measuring machine
(NMM-1). The AFM, which is operated in closed-loop intermittent contact mode,
is based on two rotational axes that enable the adjustment of the probe direction
to cover a complete hemisphere. The axes greatly enlarge the metrology frame of
the measuring system by materials with a comparatively high coefficient of thermal
expansion, which ultimately limits the achievable measurement uncertainty of the
measuring system. Thus, to reduce the thermal sensitivity of the system, the redesign
of the rotational kinematics is mandatory. However, in this article, some preliminary
investigations on the application of a self-sensing cantilever with an integrated
micro heater for its stimulation will be presented. In previous investigations,
a piezoelectric actuator has been applied to stimulate the cantilever. However,
the removal of the piezoelectric actuator, which is enabled by the application
of a cantilever with an integrated micro heater, promises an essential simplification
of the sensor holder. Thus, in the future it might be possible to use materials
with a low coefficient of thermal expansion, which are often difficult to machine
and therefore only allow for rather simple geometries. Furthermore, because of
the creepage of piezoelectric actuators, their removal from the metrology frame
might lead to improved metrological characteristics. As will be shown, there are
no significant differences between the two modes of actuation. Therefore, the
redesigned rotational system will be based on the cantilever with integrated sensing
and actuation.
author:
- first_name: Janik
full_name: Schaude, Janik
last_name: Schaude
- first_name: Tino
full_name: Hausotte, Tino
last_name: Hausotte
citation:
ama: Schaude J, Hausotte T. Atomic Force Microscope with an Adjustable Probe Direction
and Integrated Sensing and Actuation. Nanomanufacturing and Metrology.
2022;5(2):139-148. doi:10.1007/s41871-022-00143-9
apa: Schaude, J., & Hausotte, T. (2022). Atomic Force Microscope with an Adjustable
Probe Direction and Integrated Sensing and Actuation. Nanomanufacturing and
Metrology, 5(2), 139–148. https://doi.org/10.1007/s41871-022-00143-9
bibtex: '@article{Schaude_Hausotte_2022, title={Atomic Force Microscope with an
Adjustable Probe Direction and Integrated Sensing and Actuation}, volume={5},
DOI={10.1007/s41871-022-00143-9},
number={2}, journal={Nanomanufacturing and Metrology}, publisher={Springer Science
and Business Media LLC}, author={Schaude, Janik and Hausotte, Tino}, year={2022},
pages={139–148} }'
chicago: 'Schaude, Janik, and Tino Hausotte. “Atomic Force Microscope with an Adjustable
Probe Direction and Integrated Sensing and Actuation.” Nanomanufacturing and
Metrology 5, no. 2 (2022): 139–48. https://doi.org/10.1007/s41871-022-00143-9.'
ieee: 'J. Schaude and T. Hausotte, “Atomic Force Microscope with an Adjustable Probe
Direction and Integrated Sensing and Actuation,” Nanomanufacturing and Metrology,
vol. 5, no. 2, pp. 139–148, 2022, doi: 10.1007/s41871-022-00143-9.'
mla: Schaude, Janik, and Tino Hausotte. “Atomic Force Microscope with an Adjustable
Probe Direction and Integrated Sensing and Actuation.” Nanomanufacturing and
Metrology, vol. 5, no. 2, Springer Science and Business Media LLC, 2022, pp.
139–48, doi:10.1007/s41871-022-00143-9.
short: J. Schaude, T. Hausotte, Nanomanufacturing and Metrology 5 (2022) 139–148.
date_created: 2022-12-05T21:15:09Z
date_updated: 2023-01-02T11:10:08Z
department:
- _id: '630'
doi: 10.1007/s41871-022-00143-9
intvolume: ' 5'
issue: '2'
keyword:
- Industrial and Manufacturing Engineering
- Mechanical Engineering
- Materials Science (miscellaneous)
language:
- iso: eng
page: 139-148
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '133'
name: 'TRR 285 - C: TRR 285 - Project Area C'
- _id: '149'
name: 'TRR 285 – C05: TRR 285 - Subproject C05'
publication: Nanomanufacturing and Metrology
publication_identifier:
issn:
- 2520-811X
- 2520-8128
publication_status: published
publisher: Springer Science and Business Media LLC
status: public
title: Atomic Force Microscope with an Adjustable Probe Direction and Integrated Sensing
and Actuation
type: journal_article
user_id: '14931'
volume: 5
year: '2022'
...
---
_id: '34209'
abstract:
- lang: eng
text: Predicting the durability of components subjected to mechanical load under
environmental conditions leading to corrosion is one of the most challenging tasks
in mechanical engineering. The demand for precise predictions increases with the
desire of lightweight design in transportation due to environmental protection.
Corrosion with its manifold of mechanisms often occurs together with the production
of hydrogen by electrochemical reactions. Hydrogen embrittlement is one of the
most feared damage mechanisms for metal constructions often leading to early and
unexpected failure. Until now, predictions are mostly based on costly experiments.
Hence, a rational predictive model based on the fundamentals of electrochemistry
and damage mechanics has to be developed in order to reduce the costs. In this
work, a first model approach based on classical continuum damage mechanics is
presented to couple both, the damage induced by the mechanical stress and the
hydrogen embrittlement. An elaborated two-scale model based on the selfconsistent
theory is applied to describe the mechanical damage due to fatigue. The electrochemical
kinetics are elucidated through the Langmuir adsorption isotherm and the diffusion
equation to consider the impact of hydrogen embrittlement on the fatigue. The
modeling of the mechanism of hydrogen embrittlement defines the progress of damage
accumulation due to the electrochemistry. The durability results like the S-N
diagram show the influence of hydrogen embrittlement by varying, e.g. the fatigue
frequency or the stress ratio.
author:
- first_name: Yuhao
full_name: Shi, Yuhao
last_name: Shi
- first_name: Sven
full_name: Harzheim, Sven
last_name: Harzheim
- first_name: Martin
full_name: Hofmann, Martin
last_name: Hofmann
- first_name: Thomas
full_name: Wallmersperger, Thomas
last_name: Wallmersperger
citation:
ama: 'Shi Y, Harzheim S, Hofmann M, Wallmersperger T. A Damage Model for Corrosion
Fatigue Due to Hydrogen Embrittlement. In: Material Modeling and Structural
Mechanics. Springer International Publishing; 2022. doi:10.1007/978-3-030-97675-0_9'
apa: Shi, Y., Harzheim, S., Hofmann, M., & Wallmersperger, T. (2022). A Damage
Model for Corrosion Fatigue Due to Hydrogen Embrittlement. In Material Modeling
and Structural Mechanics. Springer International Publishing. https://doi.org/10.1007/978-3-030-97675-0_9
bibtex: '@inbook{Shi_Harzheim_Hofmann_Wallmersperger_2022, place={Cham}, title={A
Damage Model for Corrosion Fatigue Due to Hydrogen Embrittlement}, DOI={10.1007/978-3-030-97675-0_9},
booktitle={Material Modeling and Structural Mechanics}, publisher={Springer International
Publishing}, author={Shi, Yuhao and Harzheim, Sven and Hofmann, Martin and Wallmersperger,
Thomas}, year={2022} }'
chicago: 'Shi, Yuhao, Sven Harzheim, Martin Hofmann, and Thomas Wallmersperger.
“A Damage Model for Corrosion Fatigue Due to Hydrogen Embrittlement.” In Material
Modeling and Structural Mechanics. Cham: Springer International Publishing,
2022. https://doi.org/10.1007/978-3-030-97675-0_9.'
ieee: 'Y. Shi, S. Harzheim, M. Hofmann, and T. Wallmersperger, “A Damage Model for
Corrosion Fatigue Due to Hydrogen Embrittlement,” in Material Modeling and
Structural Mechanics, Cham: Springer International Publishing, 2022.'
mla: Shi, Yuhao, et al. “A Damage Model for Corrosion Fatigue Due to Hydrogen Embrittlement.”
Material Modeling and Structural Mechanics, Springer International Publishing,
2022, doi:10.1007/978-3-030-97675-0_9.
short: 'Y. Shi, S. Harzheim, M. Hofmann, T. Wallmersperger, in: Material Modeling
and Structural Mechanics, Springer International Publishing, Cham, 2022.'
date_created: 2022-12-05T20:53:13Z
date_updated: 2023-01-02T11:10:26Z
department:
- _id: '630'
doi: 10.1007/978-3-030-97675-0_9
keyword:
- Hydrogen embrittlement
- Fatigue
- Continuum damage mechanics
- Numerical simulation
- Multi-field problem
language:
- iso: eng
place: Cham
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '132'
name: 'TRR 285 - B: TRR 285 - Project Area B'
- _id: '142'
name: 'TRR 285 – B03: TRR 285 - Subproject B03'
publication: Material Modeling and Structural Mechanics
publication_identifier:
isbn:
- '9783030976743'
- '9783030976750'
issn:
- 1869-8433
- 1869-8441
publication_status: published
publisher: Springer International Publishing
status: public
title: A Damage Model for Corrosion Fatigue Due to Hydrogen Embrittlement
type: book_chapter
user_id: '14931'
year: '2022'
...
---
_id: '34251'
abstract:
- lang: eng
text: Joining by forming operations presents powerful and complex joining techniques.
Clinching is a well-known joining process for use in sheet metalworking. Currently,
clinched joints are focusing on mechanically enhanced connections. Additionally,
the demand for integrating electrical requirements to transmit electrical currents
will be increased in the future. This integration is particularly important, for
instance, in the e-mobility sector. It enables connecting battery cells with electrical
joints of aluminum and copper. Systematic use of the process-specific advantages
of this joining method opens up the possibility to find and create electrically
optimized connections. The optimization for the transmission of electrical currents
will be demonstrated for clinched joints by adapting the tool geometry and the
clinched joint design. Based on a comparison of the electrical joint resistance,
the limit use temperature is defined for the joining materials used based on the
microstructural condition and the aging condition due to artificial aging. As
a result of the investigations carried out, reliable current transmission at a
constant conductor temperature of up to 120 °C can be achieved for clinched copper–copper
joints. In the case of pure aluminum joints and mixed joints of aluminum and copper,
long-term stable current transmission can be ensured up to a conductor temperature
of 100 °C.
article_number: '1651'
author:
- first_name: Jan
full_name: Kalich, Jan
last_name: Kalich
- first_name: Marcus
full_name: Matzke, Marcus
last_name: Matzke
- first_name: Wolfgang
full_name: Pfeiffer, Wolfgang
last_name: Pfeiffer
- first_name: Stephan
full_name: Schlegel, Stephan
last_name: Schlegel
- first_name: Ludwig
full_name: Kornhuber, Ludwig
last_name: Kornhuber
- first_name: Uwe
full_name: Füssel, Uwe
last_name: Füssel
citation:
ama: Kalich J, Matzke M, Pfeiffer W, Schlegel S, Kornhuber L, Füssel U. Long-Term
Behavior of Clinched Electrical Contacts. Metals. 2022;12(10). doi:10.3390/met12101651
apa: Kalich, J., Matzke, M., Pfeiffer, W., Schlegel, S., Kornhuber, L., & Füssel,
U. (2022). Long-Term Behavior of Clinched Electrical Contacts. Metals,
12(10), Article 1651. https://doi.org/10.3390/met12101651
bibtex: '@article{Kalich_Matzke_Pfeiffer_Schlegel_Kornhuber_Füssel_2022, title={Long-Term
Behavior of Clinched Electrical Contacts}, volume={12}, DOI={10.3390/met12101651},
number={101651}, journal={Metals}, publisher={MDPI AG}, author={Kalich, Jan and
Matzke, Marcus and Pfeiffer, Wolfgang and Schlegel, Stephan and Kornhuber, Ludwig
and Füssel, Uwe}, year={2022} }'
chicago: Kalich, Jan, Marcus Matzke, Wolfgang Pfeiffer, Stephan Schlegel, Ludwig
Kornhuber, and Uwe Füssel. “Long-Term Behavior of Clinched Electrical Contacts.”
Metals 12, no. 10 (2022). https://doi.org/10.3390/met12101651.
ieee: 'J. Kalich, M. Matzke, W. Pfeiffer, S. Schlegel, L. Kornhuber, and U. Füssel,
“Long-Term Behavior of Clinched Electrical Contacts,” Metals, vol. 12,
no. 10, Art. no. 1651, 2022, doi: 10.3390/met12101651.'
mla: Kalich, Jan, et al. “Long-Term Behavior of Clinched Electrical Contacts.” Metals,
vol. 12, no. 10, 1651, MDPI AG, 2022, doi:10.3390/met12101651.
short: J. Kalich, M. Matzke, W. Pfeiffer, S. Schlegel, L. Kornhuber, U. Füssel,
Metals 12 (2022).
date_created: 2022-12-06T19:20:46Z
date_updated: 2023-01-02T11:06:35Z
department:
- _id: '630'
doi: 10.3390/met12101651
intvolume: ' 12'
issue: '10'
keyword:
- General Materials Science
- Metals and Alloys
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.mdpi.com/2075-4701/12/10/1651
oa: '1'
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '131'
name: 'TRR 285 - A: TRR 285 - Project Area A'
- _id: '138'
name: 'TRR 285 – A04: TRR 285 - Subproject A04'
publication: Metals
publication_identifier:
issn:
- 2075-4701
publication_status: published
publisher: MDPI AG
status: public
title: Long-Term Behavior of Clinched Electrical Contacts
type: journal_article
user_id: '14931'
volume: 12
year: '2022'
...
---
_id: '34254'
abstract:
- lang: eng
text: A virtual test setup for investigating single fibres in a transverse shear
flow based on a parallel-plate rheometer is presented. The investigations are
carried out to verify a numerical representation of the fluid–structure interaction
(FSI), where Arbitrary Lagrangian–Eulerian (ALE) and computational fluid dynamics
(CFD) methods are used and evaluated. Both are suitable to simulate flexible solid
structures in a transverse shear flow. Comparative investigations with different
model setups and increasing complexity are presented. It is shown, that the CFD
method with an interface-based coupling approach is not capable of handling small
fibre diameters in comparison to large fluid domains due to mesh dependencies
at the interface definitions. The ALE method is more suited for this task since
fibres are embedded without any mesh restrictions. Element types beam, solid,
and discrete are considered for fibre modelling. It is shown that the beam formulation
for ALE and 3D solid elements for the CFD method are the preferred options.
article_number: '7241'
author:
- first_name: Benjamin
full_name: Gröger, Benjamin
last_name: Gröger
- first_name: Jingjing
full_name: Wang, Jingjing
last_name: Wang
- first_name: Tim
full_name: Bätzel, Tim
last_name: Bätzel
- first_name: Andreas
full_name: Hornig, Andreas
last_name: Hornig
- first_name: Maik
full_name: Gude, Maik
last_name: Gude
citation:
ama: Gröger B, Wang J, Bätzel T, Hornig A, Gude M. Modelling and Simulation Strategies
for Fluid–Structure-Interactions of Highly Viscous Thermoplastic Melt and Single
Fibres—A Numerical Study. Materials. 2022;15(20). doi:10.3390/ma15207241
apa: Gröger, B., Wang, J., Bätzel, T., Hornig, A., & Gude, M. (2022). Modelling
and Simulation Strategies for Fluid–Structure-Interactions of Highly Viscous Thermoplastic
Melt and Single Fibres—A Numerical Study. Materials, 15(20), Article
7241. https://doi.org/10.3390/ma15207241
bibtex: '@article{Gröger_Wang_Bätzel_Hornig_Gude_2022, title={Modelling and Simulation
Strategies for Fluid–Structure-Interactions of Highly Viscous Thermoplastic Melt
and Single Fibres—A Numerical Study}, volume={15}, DOI={10.3390/ma15207241},
number={207241}, journal={Materials}, publisher={MDPI AG}, author={Gröger, Benjamin
and Wang, Jingjing and Bätzel, Tim and Hornig, Andreas and Gude, Maik}, year={2022}
}'
chicago: Gröger, Benjamin, Jingjing Wang, Tim Bätzel, Andreas Hornig, and Maik Gude.
“Modelling and Simulation Strategies for Fluid–Structure-Interactions of Highly
Viscous Thermoplastic Melt and Single Fibres—A Numerical Study.” Materials
15, no. 20 (2022). https://doi.org/10.3390/ma15207241.
ieee: 'B. Gröger, J. Wang, T. Bätzel, A. Hornig, and M. Gude, “Modelling and Simulation
Strategies for Fluid–Structure-Interactions of Highly Viscous Thermoplastic Melt
and Single Fibres—A Numerical Study,” Materials, vol. 15, no. 20, Art.
no. 7241, 2022, doi: 10.3390/ma15207241.'
mla: Gröger, Benjamin, et al. “Modelling and Simulation Strategies for Fluid–Structure-Interactions
of Highly Viscous Thermoplastic Melt and Single Fibres—A Numerical Study.” Materials,
vol. 15, no. 20, 7241, MDPI AG, 2022, doi:10.3390/ma15207241.
short: B. Gröger, J. Wang, T. Bätzel, A. Hornig, M. Gude, Materials 15 (2022).
date_created: 2022-12-06T20:33:11Z
date_updated: 2023-01-02T11:06:58Z
department:
- _id: '630'
doi: 10.3390/ma15207241
intvolume: ' 15'
issue: '20'
keyword:
- General Materials Science
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.mdpi.com/1996-1944/15/20/7241
oa: '1'
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '131'
name: 'TRR 285 - A: TRR 285 - Project Area A'
- _id: '137'
name: 'TRR 285 – A03: TRR 285 - Subproject A03'
publication: Materials
publication_identifier:
issn:
- 1996-1944
publication_status: published
publisher: MDPI AG
status: public
title: Modelling and Simulation Strategies for Fluid–Structure-Interactions of Highly
Viscous Thermoplastic Melt and Single Fibres—A Numerical Study
type: journal_article
user_id: '14931'
volume: 15
year: '2022'
...
---
_id: '34257'
abstract:
- lang: eng
text: Galvanic corrosion is a destructive process between dissimilar metals. The
present paper presents a constructed numerical test case to simulate galvanic
corrosion of two dissimilar metals. This test case is used to study the accuracy
of different implementations to track the dissolving anode boundary. One technique
is to numerically simulate a mesh displacement based on the prescribed displacement
at the anode boundary. The second method is to adjust only the boundary elements.
Re-meshing after a certain number of time steps is applied to both implementations.
They produce similar results for an electrical and electrochemical field problem.
This work shows that mesh smoothing does not result in higher accuracy when modeling
a moving anode front. Adjusting only the boundary elements is sufficient when
frequent re-meshing is used.
author:
- first_name: Sven
full_name: Harzheim, Sven
last_name: Harzheim
- first_name: Martin
full_name: Hofmann, Martin
last_name: Hofmann
- first_name: Thomas
full_name: Wallmersperger, Thomas
last_name: Wallmersperger
citation:
ama: Harzheim S, Hofmann M, Wallmersperger T. Comparison of two mesh-moving techniques
for finite element simulations of galvanic corrosion. Acta Mechanica. 2022;233(11):4427-4439.
doi:10.1007/s00707-022-03326-z
apa: Harzheim, S., Hofmann, M., & Wallmersperger, T. (2022). Comparison of two
mesh-moving techniques for finite element simulations of galvanic corrosion. Acta
Mechanica, 233(11), 4427–4439. https://doi.org/10.1007/s00707-022-03326-z
bibtex: '@article{Harzheim_Hofmann_Wallmersperger_2022, title={Comparison of two
mesh-moving techniques for finite element simulations of galvanic corrosion},
volume={233}, DOI={10.1007/s00707-022-03326-z},
number={11}, journal={Acta Mechanica}, publisher={Springer Science and Business
Media LLC}, author={Harzheim, Sven and Hofmann, Martin and Wallmersperger, Thomas},
year={2022}, pages={4427–4439} }'
chicago: 'Harzheim, Sven, Martin Hofmann, and Thomas Wallmersperger. “Comparison
of Two Mesh-Moving Techniques for Finite Element Simulations of Galvanic Corrosion.”
Acta Mechanica 233, no. 11 (2022): 4427–39. https://doi.org/10.1007/s00707-022-03326-z.'
ieee: 'S. Harzheim, M. Hofmann, and T. Wallmersperger, “Comparison of two mesh-moving
techniques for finite element simulations of galvanic corrosion,” Acta Mechanica,
vol. 233, no. 11, pp. 4427–4439, 2022, doi: 10.1007/s00707-022-03326-z.'
mla: Harzheim, Sven, et al. “Comparison of Two Mesh-Moving Techniques for Finite
Element Simulations of Galvanic Corrosion.” Acta Mechanica, vol. 233, no.
11, Springer Science and Business Media LLC, 2022, pp. 4427–39, doi:10.1007/s00707-022-03326-z.
short: S. Harzheim, M. Hofmann, T. Wallmersperger, Acta Mechanica 233 (2022) 4427–4439.
date_created: 2022-12-06T20:47:16Z
date_updated: 2023-01-02T11:07:28Z
department:
- _id: '630'
doi: 10.1007/s00707-022-03326-z
intvolume: ' 233'
issue: '11'
keyword:
- Mechanical Engineering
- Computational Mechanics
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://link.springer.com/article/10.1007/s00707-022-03326-z
oa: '1'
page: 4427-4439
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '142'
name: 'TRR 285 – B03: TRR 285 - Subproject B03'
publication: Acta Mechanica
publication_identifier:
issn:
- 0001-5970
- 1619-6937
publication_status: published
publisher: Springer Science and Business Media LLC
status: public
title: Comparison of two mesh-moving techniques for finite element simulations of
galvanic corrosion
type: journal_article
user_id: '14931'
volume: 233
year: '2022'
...
---
_id: '34250'
abstract:
- lang: eng
text: As a joining-by-forming process, clinching and the use of functional elements
enable low-energy joining of components through form, force, and, under certain
conditions, material closure. In addition to the transmission of mechanical forces,
these joining processes can be qualified for additional electrical contact within
the scope of functional integration for electro-mobile applications. For this
purpose, maximizing the force and material closure is necessary to ensure a long-term,
stable transmission of electrical currents. To this end, the electrical properties
of the joints were optimized. The investigations carried out show the long-term
behavior under normal operating conditions and the short-circuit case.
author:
- first_name: Uwe
full_name: Füssel, Uwe
last_name: Füssel
- first_name: Stephan
full_name: Schlegel, Stephan
last_name: Schlegel
- first_name: Gregor
full_name: Reschke, Gregor
last_name: Reschke
- first_name: Jan
full_name: Kalich, Jan
last_name: Kalich
citation:
ama: 'Füssel U, Schlegel S, Reschke G, Kalich J. Electrical Contacting of Aluminum
Bus Bars Using Clinching and Functional Elements. In: SFU/ICAFT 2022. MDPI;
2022. doi:10.3390/engproc2022026005'
apa: Füssel, U., Schlegel, S., Reschke, G., & Kalich, J. (2022). Electrical
Contacting of Aluminum Bus Bars Using Clinching and Functional Elements. SFU/ICAFT
2022. https://doi.org/10.3390/engproc2022026005
bibtex: '@inproceedings{Füssel_Schlegel_Reschke_Kalich_2022, title={Electrical Contacting
of Aluminum Bus Bars Using Clinching and Functional Elements}, DOI={10.3390/engproc2022026005},
booktitle={SFU/ICAFT 2022}, publisher={MDPI}, author={Füssel, Uwe and Schlegel,
Stephan and Reschke, Gregor and Kalich, Jan}, year={2022} }'
chicago: Füssel, Uwe, Stephan Schlegel, Gregor Reschke, and Jan Kalich. “Electrical
Contacting of Aluminum Bus Bars Using Clinching and Functional Elements.” In SFU/ICAFT
2022. MDPI, 2022. https://doi.org/10.3390/engproc2022026005.
ieee: 'U. Füssel, S. Schlegel, G. Reschke, and J. Kalich, “Electrical Contacting
of Aluminum Bus Bars Using Clinching and Functional Elements,” 2022, doi: 10.3390/engproc2022026005.'
mla: Füssel, Uwe, et al. “Electrical Contacting of Aluminum Bus Bars Using Clinching
and Functional Elements.” SFU/ICAFT 2022, MDPI, 2022, doi:10.3390/engproc2022026005.
short: 'U. Füssel, S. Schlegel, G. Reschke, J. Kalich, in: SFU/ICAFT 2022, MDPI,
2022.'
date_created: 2022-12-06T19:12:23Z
date_updated: 2023-01-02T11:09:44Z
department:
- _id: '630'
doi: 10.3390/engproc2022026005
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '131'
name: 'TRR 285 - A: TRR 285 - Project Area A'
- _id: '138'
name: 'TRR 285 – A04: TRR 285 - Subproject A04'
publication: SFU/ICAFT 2022
publication_status: published
publisher: MDPI
status: public
title: Electrical Contacting of Aluminum Bus Bars Using Clinching and Functional Elements
type: conference
user_id: '14931'
year: '2022'
...
---
_id: '34280'
abstract:
- lang: eng
text: Clinching is a cost efficient method for joining components in series production.
To assure the clinch point’s quality, the force displacement curve during clinching
or the bottom thickness are monitored. The most significant geometrical characteristics
of the clinch point, neck thickness and undercut, are usually tested destructively
by microsectioning. However, micrograph preparation goes ahead with a resetting
of elastic deformations and crack-closing after unloading. To generate a comprehensive
knowledge of the clinch point’s inner geometry under load, in-situ computed tomography
(CT) and acoustic testing (TDA) can be combined. While the TDA is highly sensitive
to the inner state of the clinch point, it could detect critical events like crack
development during loading. If such events are indicated, the loading process
is stopped and a stepped in-situ CT of the following crack and deformation development
is performed. In this paper, the concept is applied to the process of clinching
itself, providing a detailed three-dimensional insight in the development of the
joining zone. A test set-up is used which allows a stepwise clinching of two aluminium
sheets EN AW 6014. Furthermore, this set-up is positioned within a CT system.
In order to minimize X-ray absorption, a beryllium cylinder is used within the
set-up frame and clinching tools are made from Si3N4. The actuator and sensor
necessary for the TDA are integrated in the set-up. In regular process steps,
the clinching process is interrupted in order to perform a TDA and a CT scan.
In order to enhance the visibility of the interface, a thin tin layer is positioned
between the sheets prior clinching. It is shown, that the test-set up allows a
monitoring of the dynamic behaviour of the specimen during clinching while the
CT scans visualize the inner geometry and material flow non-destructively.
author:
- first_name: Daniel
full_name: Köhler, Daniel
last_name: Köhler
- first_name: Richard
full_name: Stephan, Richard
last_name: Stephan
- first_name: Robert
full_name: Kupfer, Robert
last_name: Kupfer
- first_name: Juliane
full_name: Troschitz, Juliane
last_name: Troschitz
- first_name: Alexander
full_name: Brosius, Alexander
last_name: Brosius
- first_name: Maik
full_name: Gude, Maik
last_name: Gude
citation:
ama: 'Köhler D, Stephan R, Kupfer R, Troschitz J, Brosius A, Gude M. Investigations
on Combined in situ CT and Acoustic Analysis during Clinching. In: Key Engineering
Materials. Vol 926. Trans Tech Publications, Ltd.; 2022:1489-1497. doi:10.4028/p-32330d'
apa: Köhler, D., Stephan, R., Kupfer, R., Troschitz, J., Brosius, A., & Gude,
M. (2022). Investigations on Combined in situ CT and Acoustic Analysis during
Clinching. Key Engineering Materials, 926, 1489–1497. https://doi.org/10.4028/p-32330d
bibtex: '@inproceedings{Köhler_Stephan_Kupfer_Troschitz_Brosius_Gude_2022, title={Investigations
on Combined in situ CT and Acoustic Analysis during Clinching}, volume={926},
DOI={10.4028/p-32330d}, booktitle={Key
Engineering Materials}, publisher={Trans Tech Publications, Ltd.}, author={Köhler,
Daniel and Stephan, Richard and Kupfer, Robert and Troschitz, Juliane and Brosius,
Alexander and Gude, Maik}, year={2022}, pages={1489–1497} }'
chicago: Köhler, Daniel, Richard Stephan, Robert Kupfer, Juliane Troschitz, Alexander
Brosius, and Maik Gude. “Investigations on Combined in Situ CT and Acoustic Analysis
during Clinching.” In Key Engineering Materials, 926:1489–97. Trans Tech
Publications, Ltd., 2022. https://doi.org/10.4028/p-32330d.
ieee: 'D. Köhler, R. Stephan, R. Kupfer, J. Troschitz, A. Brosius, and M. Gude,
“Investigations on Combined in situ CT and Acoustic Analysis during Clinching,”
in Key Engineering Materials, 2022, vol. 926, pp. 1489–1497, doi: 10.4028/p-32330d.'
mla: Köhler, Daniel, et al. “Investigations on Combined in Situ CT and Acoustic
Analysis during Clinching.” Key Engineering Materials, vol. 926, Trans
Tech Publications, Ltd., 2022, pp. 1489–97, doi:10.4028/p-32330d.
short: 'D. Köhler, R. Stephan, R. Kupfer, J. Troschitz, A. Brosius, M. Gude, in:
Key Engineering Materials, Trans Tech Publications, Ltd., 2022, pp. 1489–1497.'
date_created: 2022-12-07T16:38:44Z
date_updated: 2023-01-02T11:13:59Z
department:
- _id: '630'
doi: 10.4028/p-32330d
intvolume: ' 926'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- General Materials Science
language:
- iso: eng
page: 1489-1497
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '133'
name: 'TRR 285 - C: TRR 285 - Project Area C'
- _id: '148'
name: 'TRR 285 – C04: TRR 285 - Subproject C04'
publication: Key Engineering Materials
publication_identifier:
issn:
- 1662-9795
publication_status: published
publisher: Trans Tech Publications, Ltd.
status: public
title: Investigations on Combined in situ CT and Acoustic Analysis during Clinching
type: conference
user_id: '14931'
volume: 926
year: '2022'
...
---
_id: '34414'
abstract:
- lang: eng
text: Given a steadily increasing demand on multi-material lightweight designs,
fast and cost-efficient production technologies, such as the mechanical joining
process clinching, are becoming more and more relevant for series production.
Since the application of such joining techniques often base on the ability to
reach similar or even better joint loading capacities compared to established
joining processes (e.g., spot welding), few contributions investigated the systematic
improvement of clinch joint characteristics. In this regard, the use of data-driven
methods in combination with optimization algorithms showed already high potentials
for the analysis of individual joints and the definition of optimal tool configurations.
However, the often missing consideration of uncertainties, such as varying material
properties, and the related calculation of their impact on clinch joint properties
can lead to poor estimation results and thus to a decreased reliability of the
entire joint connection. This can cause major challenges, especially for the design
and dimensioning of safety-relevant components, such as in car bodies. Motivated
by this, the presented contribution introduces a novel method for the robust estimation
of clinch joint characteristics including uncertainties of varying and versatile
process chains in mechanical joining. Therefore, the utilization of Gaussian process
regression models is demonstrated and evaluated regarding the ability to achieve
sufficient prediction qualities.
author:
- first_name: Christoph
full_name: Zirngibl, Christoph
last_name: Zirngibl
- first_name: Benjamin
full_name: Schleich, Benjamin
last_name: Schleich
- first_name: Sandro
full_name: Wartzack, Sandro
last_name: Wartzack
citation:
ama: Zirngibl C, Schleich B, Wartzack S. Robust estimation of clinch joint characteristics
based on data-driven methods. The International Journal of Advanced Manufacturing
Technology. Published online 2022. doi:10.1007/s00170-022-10441-7
apa: Zirngibl, C., Schleich, B., & Wartzack, S. (2022). Robust estimation of
clinch joint characteristics based on data-driven methods. The International
Journal of Advanced Manufacturing Technology. https://doi.org/10.1007/s00170-022-10441-7
bibtex: '@article{Zirngibl_Schleich_Wartzack_2022, title={Robust estimation of clinch
joint characteristics based on data-driven methods}, DOI={10.1007/s00170-022-10441-7},
journal={The International Journal of Advanced Manufacturing Technology}, publisher={Springer
Science and Business Media LLC}, author={Zirngibl, Christoph and Schleich, Benjamin
and Wartzack, Sandro}, year={2022} }'
chicago: Zirngibl, Christoph, Benjamin Schleich, and Sandro Wartzack. “Robust Estimation
of Clinch Joint Characteristics Based on Data-Driven Methods.” The International
Journal of Advanced Manufacturing Technology, 2022. https://doi.org/10.1007/s00170-022-10441-7.
ieee: 'C. Zirngibl, B. Schleich, and S. Wartzack, “Robust estimation of clinch joint
characteristics based on data-driven methods,” The International Journal of
Advanced Manufacturing Technology, 2022, doi: 10.1007/s00170-022-10441-7.'
mla: Zirngibl, Christoph, et al. “Robust Estimation of Clinch Joint Characteristics
Based on Data-Driven Methods.” The International Journal of Advanced Manufacturing
Technology, Springer Science and Business Media LLC, 2022, doi:10.1007/s00170-022-10441-7.
short: C. Zirngibl, B. Schleich, S. Wartzack, The International Journal of Advanced
Manufacturing Technology (2022).
date_created: 2022-12-14T12:24:29Z
date_updated: 2023-01-02T11:14:26Z
department:
- _id: '630'
doi: 10.1007/s00170-022-10441-7
keyword:
- Industrial and Manufacturing Engineering
- Computer Science Applications
- Mechanical Engineering
- Software
- Control and Systems Engineering
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://link.springer.com/article/10.1007/s00170-022-10441-7
oa: '1'
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '132'
name: 'TRR 285 - B: TRR 285 - Project Area B'
- _id: '144'
name: 'TRR 285 – B05: TRR 285 - Subproject B05'
publication: The International Journal of Advanced Manufacturing Technology
publication_identifier:
issn:
- 0268-3768
- 1433-3015
publication_status: published
publisher: Springer Science and Business Media LLC
status: public
title: Robust estimation of clinch joint characteristics based on data-driven methods
type: journal_article
user_id: '14931'
year: '2022'
...
---
_id: '34261'
abstract:
- lang: eng
text: Mechanical clinching is used to create lightweight hybrid structures. In order
to estimate the service life of clinched components, its fatigue properties need
to be known under different mechanical loading conditions. In addition to fatigue,
corrosion is another factor that affects the fatigue life of clinched joints.
In the literature, many corrosion and high-cycle fatigue damage models exist.
However, little is known about how both phenomena interact in clinched joints.
In this article, the influence of galvanic corrosion on clinched EN AW-6014/HCT590X + Z
sheets on the fatigue life is investigated by means of numerical simulations and
experimental results. An accurate prediction of the Wöhler lines of non-corroded
and pre-corroded clinched specimens is shown.
author:
- first_name: Sven
full_name: Harzheim, Sven
last_name: Harzheim
- first_name: Martin
full_name: Hofmann, Martin
last_name: Hofmann
- first_name: Thomas
full_name: Wallmersperger, Thomas
last_name: Wallmersperger
citation:
ama: Harzheim S, Hofmann M, Wallmersperger T. Numerical fatigue life prediction
of corroded and non-corroded clinched joints. Mechanics of Advanced Materials
and Structures. Published online 2022:1-6. doi:10.1080/15376494.2022.2140233
apa: Harzheim, S., Hofmann, M., & Wallmersperger, T. (2022). Numerical fatigue
life prediction of corroded and non-corroded clinched joints. Mechanics of
Advanced Materials and Structures, 1–6. https://doi.org/10.1080/15376494.2022.2140233
bibtex: '@article{Harzheim_Hofmann_Wallmersperger_2022, title={Numerical fatigue
life prediction of corroded and non-corroded clinched joints}, DOI={10.1080/15376494.2022.2140233},
journal={Mechanics of Advanced Materials and Structures}, publisher={Informa UK
Limited}, author={Harzheim, Sven and Hofmann, Martin and Wallmersperger, Thomas},
year={2022}, pages={1–6} }'
chicago: Harzheim, Sven, Martin Hofmann, and Thomas Wallmersperger. “Numerical Fatigue
Life Prediction of Corroded and Non-Corroded Clinched Joints.” Mechanics of
Advanced Materials and Structures, 2022, 1–6. https://doi.org/10.1080/15376494.2022.2140233.
ieee: 'S. Harzheim, M. Hofmann, and T. Wallmersperger, “Numerical fatigue life prediction
of corroded and non-corroded clinched joints,” Mechanics of Advanced Materials
and Structures, pp. 1–6, 2022, doi: 10.1080/15376494.2022.2140233.'
mla: Harzheim, Sven, et al. “Numerical Fatigue Life Prediction of Corroded and Non-Corroded
Clinched Joints.” Mechanics of Advanced Materials and Structures, Informa
UK Limited, 2022, pp. 1–6, doi:10.1080/15376494.2022.2140233.
short: S. Harzheim, M. Hofmann, T. Wallmersperger, Mechanics of Advanced Materials
and Structures (2022) 1–6.
date_created: 2022-12-07T10:03:17Z
date_updated: 2023-01-02T11:10:49Z
department:
- _id: '630'
doi: 10.1080/15376494.2022.2140233
keyword:
- Mechanical Engineering
- Mechanics of Materials
- General Materials Science
- General Mathematics
- Civil and Structural Engineering
language:
- iso: eng
page: 1-6
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '132'
name: 'TRR 285 - B: TRR 285 - Project Area B'
- _id: '142'
name: 'TRR 285 – B03: TRR 285 - Subproject B03'
publication: Mechanics of Advanced Materials and Structures
publication_identifier:
issn:
- 1537-6494
- 1537-6532
publication_status: published
publisher: Informa UK Limited
status: public
title: Numerical fatigue life prediction of corroded and non-corroded clinched joints
type: journal_article
user_id: '14931'
year: '2022'
...
---
_id: '35115'
author:
- first_name: Klaus
full_name: Ruhnke, Klaus
last_name: Ruhnke
- first_name: Dirk
full_name: Simons, Dirk
last_name: Simons
- first_name: Sönke
full_name: Sievers, Sönke
id: '46447'
last_name: Sievers
citation:
ama: 'Ruhnke K, Simons D, Sievers S. Rechnungslegung nach IFRS und HGB: Lehrbuch
zur Theorie und Praxis der Unternehmenspublizität mit Beispielen und Übungen.
5. Schäffer-Poeschel; 2022.'
apa: 'Ruhnke, K., Simons, D., & Sievers, S. (2022). Rechnungslegung nach
IFRS und HGB: Lehrbuch zur Theorie und Praxis der Unternehmenspublizität mit Beispielen
und Übungen (5.). Schäffer-Poeschel.'
bibtex: '@book{Ruhnke_Simons_Sievers_2022, place={Stuttgart}, edition={5.}, title={Rechnungslegung
nach IFRS und HGB: Lehrbuch zur Theorie und Praxis der Unternehmenspublizität
mit Beispielen und Übungen}, publisher={Schäffer-Poeschel}, author={Ruhnke, Klaus
and Simons, Dirk and Sievers, Sönke}, year={2022} }'
chicago: 'Ruhnke, Klaus, Dirk Simons, and Sönke Sievers. Rechnungslegung nach
IFRS und HGB: Lehrbuch zur Theorie und Praxis der Unternehmenspublizität mit Beispielen
und Übungen. 5. Stuttgart: Schäffer-Poeschel, 2022.'
ieee: 'K. Ruhnke, D. Simons, and S. Sievers, Rechnungslegung nach IFRS und HGB:
Lehrbuch zur Theorie und Praxis der Unternehmenspublizität mit Beispielen und
Übungen, 5. Stuttgart: Schäffer-Poeschel, 2022.'
mla: 'Ruhnke, Klaus, et al. Rechnungslegung nach IFRS und HGB: Lehrbuch zur Theorie
und Praxis der Unternehmenspublizität mit Beispielen und Übungen. 5., Schäffer-Poeschel,
2022.'
short: 'K. Ruhnke, D. Simons, S. Sievers, Rechnungslegung nach IFRS und HGB: Lehrbuch
zur Theorie und Praxis der Unternehmenspublizität mit Beispielen und Übungen,
5., Schäffer-Poeschel, Stuttgart, 2022.'
date_created: 2023-01-03T08:08:42Z
date_updated: 2023-01-03T08:10:30Z
edition: '5.'
language:
- iso: ger
place: Stuttgart
publisher: Schäffer-Poeschel
status: public
title: 'Rechnungslegung nach IFRS und HGB: Lehrbuch zur Theorie und Praxis der Unternehmenspublizität
mit Beispielen und Übungen'
type: book
user_id: '26589'
year: '2022'
...
---
_id: '35128'
abstract:
- lang: eng
text: Here we demonstrate a new, to the best of our knowledge, type of 3-dB coupler
that has an ultra-broadband operational range from 1300 to 1600 nm with low fabrication
sensitivity. The overall device size is 800 µm including in/out S-bend waveguides.
The coupler is an asymmetric non-uniform directional coupler that consists of
two tapered waveguides. One of the coupler arms is shifted by 100 µm in the propagation
direction, which results in a more wavelength-insensitive 3-dB response compared
to a standard (not shifted) coupler. Moreover, compared to a long adiabatic coupler,
we achieved a similar wavelength response at a 16-times-smaller device length.
The couplers were fabricated using the silicon nitride platform of Lionix International.
We also experimentally demonstrated an optical switch that is made by using two
of these couplers in a Mach–Zehnder interferometer configuration. According to
experimental results, this optical switch exhibits –10 dB of extinction ratio
over the 1500–1600 nm wavelength range. Our results indicate that this new type
of coupler holds great promise for various applications, including optical imaging,
telecommunications, and reconfigurable photonic processors where compact, fabrication-tolerant,
and wavelength-insensitive couplers are essential.
author:
- first_name: Hamed
full_name: Nikbakht, Hamed
last_name: Nikbakht
- first_name: Mohammad Talebi
full_name: Khoshmehr, Mohammad Talebi
last_name: Khoshmehr
- first_name: Bob
full_name: van Someren, Bob
last_name: van Someren
- first_name: Dieter
full_name: Teichrib, Dieter
last_name: Teichrib
- first_name: Manfred
full_name: Hammer, Manfred
id: '48077'
last_name: Hammer
orcid: 0000-0002-6331-9348
- first_name: Jens
full_name: Förstner, Jens
id: '158'
last_name: Förstner
orcid: 0000-0001-7059-9862
- first_name: B. Imran
full_name: Akca, B. Imran
last_name: Akca
citation:
ama: Nikbakht H, Khoshmehr MT, van Someren B, et al. Asymmetric, non-uniform 3-dB
directional coupler with 300-nm bandwidth and a small footprint. Optics Letters.
2022;48(2):207. doi:10.1364/ol.476537
apa: Nikbakht, H., Khoshmehr, M. T., van Someren, B., Teichrib, D., Hammer, M.,
Förstner, J., & Akca, B. I. (2022). Asymmetric, non-uniform 3-dB directional
coupler with 300-nm bandwidth and a small footprint. Optics Letters, 48(2),
207. https://doi.org/10.1364/ol.476537
bibtex: '@article{Nikbakht_Khoshmehr_van Someren_Teichrib_Hammer_Förstner_Akca_2022,
title={Asymmetric, non-uniform 3-dB directional coupler with 300-nm bandwidth
and a small footprint}, volume={48}, DOI={10.1364/ol.476537},
number={2}, journal={Optics Letters}, publisher={Optica Publishing Group}, author={Nikbakht,
Hamed and Khoshmehr, Mohammad Talebi and van Someren, Bob and Teichrib, Dieter
and Hammer, Manfred and Förstner, Jens and Akca, B. Imran}, year={2022}, pages={207}
}'
chicago: 'Nikbakht, Hamed, Mohammad Talebi Khoshmehr, Bob van Someren, Dieter Teichrib,
Manfred Hammer, Jens Förstner, and B. Imran Akca. “Asymmetric, Non-Uniform 3-DB
Directional Coupler with 300-Nm Bandwidth and a Small Footprint.” Optics Letters
48, no. 2 (2022): 207. https://doi.org/10.1364/ol.476537.'
ieee: 'H. Nikbakht et al., “Asymmetric, non-uniform 3-dB directional coupler
with 300-nm bandwidth and a small footprint,” Optics Letters, vol. 48,
no. 2, p. 207, 2022, doi: 10.1364/ol.476537.'
mla: Nikbakht, Hamed, et al. “Asymmetric, Non-Uniform 3-DB Directional Coupler with
300-Nm Bandwidth and a Small Footprint.” Optics Letters, vol. 48, no. 2,
Optica Publishing Group, 2022, p. 207, doi:10.1364/ol.476537.
short: H. Nikbakht, M.T. Khoshmehr, B. van Someren, D. Teichrib, M. Hammer, J. Förstner,
B.I. Akca, Optics Letters 48 (2022) 207.
date_created: 2023-01-03T09:32:47Z
date_updated: 2023-01-03T10:37:34Z
ddc:
- '530'
department:
- _id: '61'
- _id: '230'
doi: 10.1364/ol.476537
file:
- access_level: local
content_type: application/pdf
creator: fossie
date_created: 2023-01-03T09:36:34Z
date_updated: 2023-01-03T09:36:34Z
embargo: 2024-01-03
embargo_to: open_access
file_id: '35129'
file_name: 2023-01 Nikbakht - Optics Letter - Asymmetric, non-uniform 3-dB directional
coupler with 300-nm bandwidth and small footprint.pdf
file_size: 3731864
relation: main_file
file_date_updated: 2023-01-03T09:36:34Z
has_accepted_license: '1'
intvolume: ' 48'
issue: '2'
keyword:
- tet_topic_waveguide
language:
- iso: eng
page: '207'
publication: Optics Letters
publication_identifier:
issn:
- 0146-9592
- 1539-4794
publication_status: published
publisher: Optica Publishing Group
status: public
title: Asymmetric, non-uniform 3-dB directional coupler with 300-nm bandwidth and
a small footprint
type: journal_article
user_id: '158'
volume: 48
year: '2022'
...
---
_id: '34744'
author:
- first_name: Matthias
full_name: Hopp, Matthias
id: '13142'
last_name: Hopp
- first_name: Leon
full_name: Schäffer, Leon
id: '57116'
last_name: Schäffer
citation:
ama: 'Hopp M, Schäffer L. Separation Of Multi-Component Parts For Mechanical Recycling
– Study About Basic Approaches Using A Heating Process. In: ; 2022.'
apa: Hopp, M., & Schäffer, L. (2022). Separation Of Multi-Component Parts
For Mechanical Recycling – Study About Basic Approaches Using A Heating Process.
37th International Conference of the Polymer Processing Society (PPS), Fukuoka.
bibtex: '@inproceedings{Hopp_Schäffer_2022, title={Separation Of Multi-Component
Parts For Mechanical Recycling – Study About Basic Approaches Using A Heating
Process}, author={Hopp, Matthias and Schäffer, Leon}, year={2022} }'
chicago: Hopp, Matthias, and Leon Schäffer. “Separation Of Multi-Component Parts
For Mechanical Recycling – Study About Basic Approaches Using A Heating Process,”
2022.
ieee: M. Hopp and L. Schäffer, “Separation Of Multi-Component Parts For Mechanical
Recycling – Study About Basic Approaches Using A Heating Process,” presented at
the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka,
2022.
mla: Hopp, Matthias, and Leon Schäffer. Separation Of Multi-Component Parts For
Mechanical Recycling – Study About Basic Approaches Using A Heating Process.
2022.
short: 'M. Hopp, L. Schäffer, in: 2022.'
conference:
location: Fukuoka
name: 37th International Conference of the Polymer Processing Society (PPS)
date_created: 2022-12-21T14:35:39Z
date_updated: 2023-01-03T12:32:16Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
status: public
title: Separation Of Multi-Component Parts For Mechanical Recycling – Study About
Basic Approaches Using A Heating Process
type: conference
user_id: '44116'
year: '2022'
...
---
_id: '33287'
author:
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: Christian
full_name: Held, Christian
id: '40647'
last_name: Held
- first_name: Johannes
full_name: Hillemeyer, Johannes
id: '27285'
last_name: Hillemeyer
citation:
ama: Moritzer E, Held C, Hillemeyer J. Dimensionierung und Optimierung von im FDM-Verfahren
3D-gedruckten Direktverschraubungen aus ABS. Joining Plastic. 2022:84-90.
apa: Moritzer, E., Held, C., & Hillemeyer, J. (2022). Dimensionierung und Optimierung
von im FDM-Verfahren 3D-gedruckten Direktverschraubungen aus ABS. Joining Plastic,
84–90.
bibtex: '@article{Moritzer_Held_Hillemeyer_2022, title={Dimensionierung und Optimierung
von im FDM-Verfahren 3D-gedruckten Direktverschraubungen aus ABS}, journal={Joining
Plastic}, author={Moritzer, Elmar and Held, Christian and Hillemeyer, Johannes},
year={2022}, pages={84–90} }'
chicago: Moritzer, Elmar, Christian Held, and Johannes Hillemeyer. “Dimensionierung
Und Optimierung von Im FDM-Verfahren 3D-Gedruckten Direktverschraubungen Aus ABS.”
Joining Plastic, 2022.
ieee: E. Moritzer, C. Held, and J. Hillemeyer, “Dimensionierung und Optimierung
von im FDM-Verfahren 3D-gedruckten Direktverschraubungen aus ABS,” Joining
Plastic, pp. 84–90, 2022.
mla: Moritzer, Elmar, et al. “Dimensionierung Und Optimierung von Im FDM-Verfahren
3D-Gedruckten Direktverschraubungen Aus ABS.” Joining Plastic, 2022, pp.
84–90.
short: E. Moritzer, C. Held, J. Hillemeyer, Joining Plastic (2022) 84–90.
date_created: 2022-09-08T08:21:36Z
date_updated: 2023-01-03T12:34:34Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
page: 84-90
publication: Joining Plastic
publication_date: '2022'
publication_identifier:
issn:
- 1864-3450
status: public
title: Dimensionierung und Optimierung von im FDM-Verfahren 3D-gedruckten Direktverschraubungen
aus ABS
type: newspaper_article
user_id: '44116'
year: '2022'
...
---
_id: '33289'
author:
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: Christian
full_name: Held, Christian
id: '40647'
last_name: Held
- first_name: C.
full_name: Hopmann, C.
last_name: Hopmann
- first_name: M.
full_name: Kramer, M.
last_name: Kramer
citation:
ama: Moritzer E, Held C, Hopmann C, Kramer M. Mit der richtigen Auslegung zur sicheren
Verbindung. Kunststoffe. 2022:30-33.
apa: Moritzer, E., Held, C., Hopmann, C., & Kramer, M. (2022). Mit der richtigen
Auslegung zur sicheren Verbindung. Kunststoffe, 30–33.
bibtex: '@article{Moritzer_Held_Hopmann_Kramer_2022, title={Mit der richtigen Auslegung
zur sicheren Verbindung}, journal={Kunststoffe}, author={Moritzer, Elmar and Held,
Christian and Hopmann, C. and Kramer, M.}, year={2022}, pages={30–33} }'
chicago: Moritzer, Elmar, Christian Held, C. Hopmann, and M. Kramer. “Mit Der Richtigen
Auslegung Zur Sicheren Verbindung.” Kunststoffe, 2022.
ieee: E. Moritzer, C. Held, C. Hopmann, and M. Kramer, “Mit der richtigen Auslegung
zur sicheren Verbindung,” Kunststoffe, pp. 30–33, 2022.
mla: Moritzer, Elmar, et al. “Mit Der Richtigen Auslegung Zur Sicheren Verbindung.”
Kunststoffe, 2022, pp. 30–33.
short: E. Moritzer, C. Held, C. Hopmann, M. Kramer, Kunststoffe (2022) 30–33.
date_created: 2022-09-08T08:25:32Z
date_updated: 2023-01-03T12:33:54Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
page: 30-33
publication: Kunststoffe
publication_date: '2022'
publication_identifier:
issn:
- 0023-5563
status: public
title: Mit der richtigen Auslegung zur sicheren Verbindung
type: newspaper_article
user_id: '44116'
year: '2022'
...
---
_id: '33703'
author:
- first_name: Gabriela
full_name: Jonas-Ahrend, Gabriela
id: '77633'
last_name: Jonas-Ahrend
- first_name: Mats
full_name: Vernholz, Mats
id: '76955'
last_name: Vernholz
- first_name: Katrin
full_name: Temmen, Katrin
id: '30086'
last_name: Temmen
citation:
ama: 'Jonas-Ahrend G, Vernholz M, Temmen K. Wie bewährt sich das duale berufliche
Ausbildungssystem der industriellen Metall und Elektroausbildung unter Pandemiebedingungen?
Lehrkräfte und Auszubildende reflektieren. In: Heisler D, Meier JA, eds. Berufsausbildung
zwischen Hygienemaßnahmen und Lockdown(s): Folgen für die schulische und außerschulische
Berufsausbildung in Schule, im Betrieb und bei Bildungsträgern. wbv ; 2022:257-276.
doi:10.3278/9783763972579'
apa: 'Jonas-Ahrend, G., Vernholz, M., & Temmen, K. (2022). Wie bewährt sich
das duale berufliche Ausbildungssystem der industriellen Metall und Elektroausbildung
unter Pandemiebedingungen? Lehrkräfte und Auszubildende reflektieren. In D. Heisler
& J. A. Meier (Eds.), Berufsausbildung zwischen Hygienemaßnahmen und Lockdown(s):
Folgen für die schulische und außerschulische Berufsausbildung in Schule, im Betrieb
und bei Bildungsträgern (pp. 257–276). wbv . https://doi.org/10.3278/9783763972579'
bibtex: '@inbook{Jonas-Ahrend_Vernholz_Temmen_2022, place={Bielefeld}, title={Wie
bewährt sich das duale berufliche Ausbildungssystem der industriellen Metall und
Elektroausbildung unter Pandemiebedingungen? Lehrkräfte und Auszubildende reflektieren},
DOI={10.3278/9783763972579},
booktitle={Berufsausbildung zwischen Hygienemaßnahmen und Lockdown(s): Folgen
für die schulische und außerschulische Berufsausbildung in Schule, im Betrieb
und bei Bildungsträgern}, publisher={wbv }, author={Jonas-Ahrend, Gabriela and
Vernholz, Mats and Temmen, Katrin}, editor={Heisler, Dietmar and Meier, Jörg A.},
year={2022}, pages={257–276} }'
chicago: 'Jonas-Ahrend, Gabriela, Mats Vernholz, and Katrin Temmen. “Wie bewährt
sich das duale berufliche Ausbildungssystem der industriellen Metall und Elektroausbildung
unter Pandemiebedingungen? Lehrkräfte und Auszubildende reflektieren.” In Berufsausbildung
zwischen Hygienemaßnahmen und Lockdown(s): Folgen für die schulische und außerschulische
Berufsausbildung in Schule, im Betrieb und bei Bildungsträgern, edited by
Dietmar Heisler and Jörg A. Meier, 257–76. Bielefeld: wbv , 2022. https://doi.org/10.3278/9783763972579.'
ieee: 'G. Jonas-Ahrend, M. Vernholz, and K. Temmen, “Wie bewährt sich das duale
berufliche Ausbildungssystem der industriellen Metall und Elektroausbildung unter
Pandemiebedingungen? Lehrkräfte und Auszubildende reflektieren,” in Berufsausbildung
zwischen Hygienemaßnahmen und Lockdown(s): Folgen für die schulische und außerschulische
Berufsausbildung in Schule, im Betrieb und bei Bildungsträgern, D. Heisler
and J. A. Meier, Eds. Bielefeld: wbv , 2022, pp. 257–276.'
mla: 'Jonas-Ahrend, Gabriela, et al. “Wie bewährt sich das duale berufliche Ausbildungssystem
der industriellen Metall und Elektroausbildung unter Pandemiebedingungen? Lehrkräfte
und Auszubildende reflektieren.” Berufsausbildung zwischen Hygienemaßnahmen
und Lockdown(s): Folgen für die schulische und außerschulische Berufsausbildung
in Schule, im Betrieb und bei Bildungsträgern, edited by Dietmar Heisler and
Jörg A. Meier, wbv , 2022, pp. 257–76, doi:10.3278/9783763972579.'
short: 'G. Jonas-Ahrend, M. Vernholz, K. Temmen, in: D. Heisler, J.A. Meier (Eds.),
Berufsausbildung zwischen Hygienemaßnahmen und Lockdown(s): Folgen für die schulische
und außerschulische Berufsausbildung in Schule, im Betrieb und bei Bildungsträgern,
wbv , Bielefeld, 2022, pp. 257–276.'
date_created: 2022-10-13T06:39:22Z
date_updated: 2023-01-04T08:13:21Z
department:
- _id: '300'
doi: 10.3278/9783763972579
editor:
- first_name: Dietmar
full_name: Heisler, Dietmar
last_name: Heisler
- first_name: Jörg A.
full_name: Meier, Jörg A.
last_name: Meier
language:
- iso: ger
page: 257-276
place: Bielefeld
publication: 'Berufsausbildung zwischen Hygienemaßnahmen und Lockdown(s): Folgen für
die schulische und außerschulische Berufsausbildung in Schule, im Betrieb und bei
Bildungsträgern'
publication_identifier:
eisbn:
- '9783763972579'
publication_status: published
publisher: 'wbv '
status: public
title: Wie bewährt sich das duale berufliche Ausbildungssystem der industriellen Metall
und Elektroausbildung unter Pandemiebedingungen? Lehrkräfte und Auszubildende reflektieren
type: book_chapter
user_id: '76955'
year: '2022'
...
---
_id: '33694'
abstract:
- lang: eng
text: "Abstract\r\n The round robin
test investigated the reliability users can expect for AlSi10Mg additive manufactured
specimens by laser powder bed fusion through examining powder quality, process
parameter, microstructure defects, strength and fatigue. Besides for one outlier,
expected static material properties could be found. Optical microstructure inspection
was beneficial to determine true porosity and porosity types to explain the occurring
scatter in properties. Fractographic analyses reveal that the fatigue crack propagation
starts at the rough as-built surface for all specimens. Statistical analysis of
the scatter in fatigue using statistical derived safety factors concludes that
at a stress of 36.87 MPa the fatigue limit of 107 cycles
could be reached for all specimen with a survival probability of 99.999 %."
author:
- first_name: M.
full_name: Schneider, M.
last_name: Schneider
- first_name: D.
full_name: Bettge, D.
last_name: Bettge
- first_name: M.
full_name: Binder, M.
last_name: Binder
- first_name: K.
full_name: Dollmeier, K.
last_name: Dollmeier
- first_name: Malte
full_name: Dreyer, Malte
id: '66695'
last_name: Dreyer
orcid: 0000-0001-9560-9510
- first_name: K.
full_name: Hilgenberg, K.
last_name: Hilgenberg
- first_name: B.
full_name: Klöden, B.
last_name: Klöden
- first_name: T.
full_name: Schlingmann, T.
last_name: Schlingmann
- first_name: J.
full_name: Schmidt, J.
last_name: Schmidt
citation:
ama: 'Schneider M, Bettge D, Binder M, et al. Reproducibility and Scattering in
Additive Manufacturing: Results from a Round Robin on PBF-LB/M AlSi10Mg Alloy.
Practical Metallography. 2022;59(10):580-614. doi:10.1515/pm-2022-1018'
apa: 'Schneider, M., Bettge, D., Binder, M., Dollmeier, K., Dreyer, M., Hilgenberg,
K., Klöden, B., Schlingmann, T., & Schmidt, J. (2022). Reproducibility and
Scattering in Additive Manufacturing: Results from a Round Robin on PBF-LB/M AlSi10Mg
Alloy. Practical Metallography, 59(10), 580–614. https://doi.org/10.1515/pm-2022-1018'
bibtex: '@article{Schneider_Bettge_Binder_Dollmeier_Dreyer_Hilgenberg_Klöden_Schlingmann_Schmidt_2022,
title={Reproducibility and Scattering in Additive Manufacturing: Results from
a Round Robin on PBF-LB/M AlSi10Mg Alloy}, volume={59}, DOI={10.1515/pm-2022-1018},
number={10}, journal={Practical Metallography}, publisher={Walter de Gruyter GmbH},
author={Schneider, M. and Bettge, D. and Binder, M. and Dollmeier, K. and Dreyer,
Malte and Hilgenberg, K. and Klöden, B. and Schlingmann, T. and Schmidt, J.},
year={2022}, pages={580–614} }'
chicago: 'Schneider, M., D. Bettge, M. Binder, K. Dollmeier, Malte Dreyer, K. Hilgenberg,
B. Klöden, T. Schlingmann, and J. Schmidt. “Reproducibility and Scattering in
Additive Manufacturing: Results from a Round Robin on PBF-LB/M AlSi10Mg Alloy.”
Practical Metallography 59, no. 10 (2022): 580–614. https://doi.org/10.1515/pm-2022-1018.'
ieee: 'M. Schneider et al., “Reproducibility and Scattering in Additive Manufacturing:
Results from a Round Robin on PBF-LB/M AlSi10Mg Alloy,” Practical Metallography,
vol. 59, no. 10, pp. 580–614, 2022, doi: 10.1515/pm-2022-1018.'
mla: 'Schneider, M., et al. “Reproducibility and Scattering in Additive Manufacturing:
Results from a Round Robin on PBF-LB/M AlSi10Mg Alloy.” Practical Metallography,
vol. 59, no. 10, Walter de Gruyter GmbH, 2022, pp. 580–614, doi:10.1515/pm-2022-1018.'
short: M. Schneider, D. Bettge, M. Binder, K. Dollmeier, M. Dreyer, K. Hilgenberg,
B. Klöden, T. Schlingmann, J. Schmidt, Practical Metallography 59 (2022) 580–614.
date_created: 2022-10-11T13:15:48Z
date_updated: 2023-01-04T14:48:17Z
doi: 10.1515/pm-2022-1018
intvolume: ' 59'
issue: '10'
keyword:
- Metals and Alloys
- Mechanics of Materials
- Condensed Matter Physics
- Electronic
- Optical and Magnetic Materials
language:
- iso: eng
page: 580-614
publication: Practical Metallography
publication_identifier:
issn:
- 2195-8599
- 0032-678X
publication_status: published
publisher: Walter de Gruyter GmbH
status: public
title: 'Reproducibility and Scattering in Additive Manufacturing: Results from a Round
Robin on PBF-LB/M AlSi10Mg Alloy'
type: journal_article
user_id: '66695'
volume: 59
year: '2022'
...
---
_id: '35232'
article_number: '2200508'
author:
- first_name: Falco
full_name: Meier, Falco
last_name: Meier
- first_name: Mario
full_name: Littmann, Mario
last_name: Littmann
- first_name: Julius
full_name: Bürger, Julius
id: '46952'
last_name: Bürger
- first_name: Thomas
full_name: Riedl, Thomas
id: '36950'
last_name: Riedl
- first_name: Daniel
full_name: Kool, Daniel
id: '44586'
last_name: Kool
- first_name: Jörg
full_name: Lindner, Jörg
id: '20797'
last_name: Lindner
- first_name: Dirk
full_name: Reuter, Dirk
id: '37763'
last_name: Reuter
- first_name: Donat Josef
full_name: As, Donat Josef
id: '14'
last_name: As
orcid: 0000-0003-1121-3565
citation:
ama: Meier F, Littmann M, Bürger J, et al. Selective Area Growth of Cubic Gallium
Nitride in Nanoscopic Silicon Dioxide Masks. physica status solidi (b).
Published online 2022. doi:10.1002/pssb.202200508
apa: Meier, F., Littmann, M., Bürger, J., Riedl, T., Kool, D., Lindner, J., Reuter,
D., & As, D. J. (2022). Selective Area Growth of Cubic Gallium Nitride in
Nanoscopic Silicon Dioxide Masks. Physica Status Solidi (b), Article 2200508.
https://doi.org/10.1002/pssb.202200508
bibtex: '@article{Meier_Littmann_Bürger_Riedl_Kool_Lindner_Reuter_As_2022, title={Selective
Area Growth of Cubic Gallium Nitride in Nanoscopic Silicon Dioxide Masks}, DOI={10.1002/pssb.202200508}, number={2200508},
journal={physica status solidi (b)}, publisher={Wiley}, author={Meier, Falco and
Littmann, Mario and Bürger, Julius and Riedl, Thomas and Kool, Daniel and Lindner,
Jörg and Reuter, Dirk and As, Donat Josef}, year={2022} }'
chicago: Meier, Falco, Mario Littmann, Julius Bürger, Thomas Riedl, Daniel Kool,
Jörg Lindner, Dirk Reuter, and Donat Josef As. “Selective Area Growth of Cubic
Gallium Nitride in Nanoscopic Silicon Dioxide Masks.” Physica Status Solidi
(b), 2022. https://doi.org/10.1002/pssb.202200508.
ieee: 'F. Meier et al., “Selective Area Growth of Cubic Gallium Nitride in
Nanoscopic Silicon Dioxide Masks,” physica status solidi (b), Art. no.
2200508, 2022, doi: 10.1002/pssb.202200508.'
mla: Meier, Falco, et al. “Selective Area Growth of Cubic Gallium Nitride in Nanoscopic
Silicon Dioxide Masks.” Physica Status Solidi (b), 2200508, Wiley, 2022,
doi:10.1002/pssb.202200508.
short: F. Meier, M. Littmann, J. Bürger, T. Riedl, D. Kool, J. Lindner, D. Reuter,
D.J. As, Physica Status Solidi (b) (2022).
date_created: 2023-01-04T14:51:51Z
date_updated: 2023-01-04T14:53:24Z
department:
- _id: '15'
doi: 10.1002/pssb.202200508
keyword:
- Condensed Matter Physics
- Electronic
- Optical and Magnetic Materials
language:
- iso: eng
publication: physica status solidi (b)
publication_identifier:
issn:
- 0370-1972
- 1521-3951
publication_status: published
publisher: Wiley
status: public
title: Selective Area Growth of Cubic Gallium Nitride in Nanoscopic Silicon Dioxide
Masks
type: journal_article
user_id: '77496'
year: '2022'
...
---
_id: '35308'
abstract:
- lang: eng
text: IntroductionIn 2012, the estimated
global prevalence of pre-diabetes was 280 million, and the prevalence is expected
to rise to 400 million by 2030. Oat-based foods are a good source of beta-glucans,
which have been shown to lower postprandial blood glucose. Studies to evaluate
the effectiveness of the long-term intake of beta-glucan-enriched bread as part
of a habitual diet among individuals with pre-diabetes are needed. Therefore,
we designed a multicentre intervention study in adults with pre-diabetes to investigate
the effects of consumption of an oat-derived beta-glucan-enriched bread as part
of a normal diet on glycated haemoglobin (HbA1c) in comparison to consumption
of whole-grain wheat bread.Methods and
analysisThe CarbHealth trial is a multicentre double-blind
randomised controlled 16-week dietary intervention trial in participants 40–70
years of age with a body mass index of ≥27 kg/m2 and HbA1c
of 35–50 mmol/mol. The study is conducted at four universities located in Norway,
Sweden and Germany and uses intervention breads specifically designed for the
trial by Nofima AS. The aim is to recruit 250 participants. The primary outcome
is the difference in HbA1c between the intervention and the control groups. The
main analysis will include intervention group, study centre and baseline HbA1c
as independent variables in an analysis of covariance model.Ethics
and disseminationThe study protocol was approved by respective
ethical authorities in participating countries. The results of the study will
be communicated through publication in international scientific journals and presentations
at (inter)national conferences.Trial
registration numberNCT04994327.
article_number: e062066
author:
- first_name: Therese
full_name: Hjorth, Therese
last_name: Hjorth
- first_name: Alena
full_name: Schadow, Alena
last_name: Schadow
- first_name: Ingrid
full_name: Revheim, Ingrid
last_name: Revheim
- first_name: Ulrike
full_name: Spielau, Ulrike
last_name: Spielau
- first_name: Lise M
full_name: Thomassen, Lise M
last_name: Thomassen
- first_name: Klara
full_name: Meyer, Klara
last_name: Meyer
- first_name: Katja
full_name: Piotrowski, Katja
last_name: Piotrowski
- first_name: Hanne
full_name: Rosendahl-Riise, Hanne
last_name: Rosendahl-Riise
- first_name: Anne
full_name: Rieder, Anne
last_name: Rieder
- first_name: Paula
full_name: Varela, Paula
last_name: Varela
- first_name: Vegard
full_name: Lysne, Vegard
last_name: Lysne
- first_name: Simon
full_name: Ballance, Simon
last_name: Ballance
- first_name: Antje
full_name: Koerner, Antje
last_name: Koerner
- first_name: Rikard
full_name: Landberg, Rikard
last_name: Landberg
- first_name: Anette
full_name: Buyken, Anette
id: '65985'
last_name: Buyken
- first_name: Jutta
full_name: Dierkes, Jutta
last_name: Dierkes
citation:
ama: 'Hjorth T, Schadow A, Revheim I, et al. Sixteen-week multicentre randomised
controlled trial to study the effect of the consumption of an oat beta-glucan-enriched
bread versus a whole-grain wheat bread on glycaemic control among persons with
pre-diabetes: a study protocol of the CarbHealth study. BMJ Open. 2022;12(8).
doi:10.1136/bmjopen-2022-062066'
apa: 'Hjorth, T., Schadow, A., Revheim, I., Spielau, U., Thomassen, L. M., Meyer,
K., Piotrowski, K., Rosendahl-Riise, H., Rieder, A., Varela, P., Lysne, V., Ballance,
S., Koerner, A., Landberg, R., Buyken, A., & Dierkes, J. (2022). Sixteen-week
multicentre randomised controlled trial to study the effect of the consumption
of an oat beta-glucan-enriched bread versus a whole-grain wheat bread on glycaemic
control among persons with pre-diabetes: a study protocol of the CarbHealth study.
BMJ Open, 12(8), Article e062066. https://doi.org/10.1136/bmjopen-2022-062066'
bibtex: '@article{Hjorth_Schadow_Revheim_Spielau_Thomassen_Meyer_Piotrowski_Rosendahl-Riise_Rieder_Varela_et
al._2022, title={Sixteen-week multicentre randomised controlled trial to study
the effect of the consumption of an oat beta-glucan-enriched bread versus a whole-grain
wheat bread on glycaemic control among persons with pre-diabetes: a study protocol
of the CarbHealth study}, volume={12}, DOI={10.1136/bmjopen-2022-062066},
number={8e062066}, journal={BMJ Open}, publisher={BMJ}, author={Hjorth, Therese
and Schadow, Alena and Revheim, Ingrid and Spielau, Ulrike and Thomassen, Lise
M and Meyer, Klara and Piotrowski, Katja and Rosendahl-Riise, Hanne and Rieder,
Anne and Varela, Paula and et al.}, year={2022} }'
chicago: 'Hjorth, Therese, Alena Schadow, Ingrid Revheim, Ulrike Spielau, Lise M
Thomassen, Klara Meyer, Katja Piotrowski, et al. “Sixteen-Week Multicentre Randomised
Controlled Trial to Study the Effect of the Consumption of an Oat Beta-Glucan-Enriched
Bread versus a Whole-Grain Wheat Bread on Glycaemic Control among Persons with
Pre-Diabetes: A Study Protocol of the CarbHealth Study.” BMJ Open 12, no.
8 (2022). https://doi.org/10.1136/bmjopen-2022-062066.'
ieee: 'T. Hjorth et al., “Sixteen-week multicentre randomised controlled
trial to study the effect of the consumption of an oat beta-glucan-enriched bread
versus a whole-grain wheat bread on glycaemic control among persons with pre-diabetes:
a study protocol of the CarbHealth study,” BMJ Open, vol. 12, no. 8, Art.
no. e062066, 2022, doi: 10.1136/bmjopen-2022-062066.'
mla: 'Hjorth, Therese, et al. “Sixteen-Week Multicentre Randomised Controlled Trial
to Study the Effect of the Consumption of an Oat Beta-Glucan-Enriched Bread versus
a Whole-Grain Wheat Bread on Glycaemic Control among Persons with Pre-Diabetes:
A Study Protocol of the CarbHealth Study.” BMJ Open, vol. 12, no. 8, e062066,
BMJ, 2022, doi:10.1136/bmjopen-2022-062066.'
short: T. Hjorth, A. Schadow, I. Revheim, U. Spielau, L.M. Thomassen, K. Meyer,
K. Piotrowski, H. Rosendahl-Riise, A. Rieder, P. Varela, V. Lysne, S. Ballance,
A. Koerner, R. Landberg, A. Buyken, J. Dierkes, BMJ Open 12 (2022).
date_created: 2023-01-05T16:31:47Z
date_updated: 2023-01-05T16:47:45Z
department:
- _id: '35'
- _id: '17'
- _id: '22'
- _id: '571'
doi: 10.1136/bmjopen-2022-062066
intvolume: ' 12'
issue: '8'
keyword:
- General Medicine
language:
- iso: eng
publication: BMJ Open
publication_identifier:
issn:
- 2044-6055
- 2044-6055
publication_status: published
publisher: BMJ
status: public
title: 'Sixteen-week multicentre randomised controlled trial to study the effect of
the consumption of an oat beta-glucan-enriched bread versus a whole-grain wheat
bread on glycaemic control among persons with pre-diabetes: a study protocol of
the CarbHealth study'
type: journal_article
user_id: '61597'
volume: 12
year: '2022'
...
---
_id: '35311'
author:
- first_name: K
full_name: Jansen, K
last_name: Jansen
- first_name: J
full_name: Tempes, J
last_name: Tempes
- first_name: A
full_name: Drozdowska, A
last_name: Drozdowska
- first_name: M
full_name: Gutmann, M
last_name: Gutmann
- first_name: M
full_name: Falkenstein, M
last_name: Falkenstein
- first_name: Anette
full_name: Buyken, Anette
id: '65985'
last_name: Buyken
- first_name: Lars
full_name: Libuda, Lars
id: '88682'
last_name: Libuda
orcid: 0000-0003-1603-3133
- first_name: H
full_name: Rudolf, H
last_name: Rudolf
- first_name: T
full_name: Lücke, T
last_name: Lücke
- first_name: M
full_name: Kersting, M
last_name: Kersting
citation:
ama: 'Jansen K, Tempes J, Drozdowska A, et al. Correction: Short-term effects of
carbohydrates differing in glycemic index (GI) consumed at lunch on children’s
cognitive function in a randomized crossover study. Eur J Clin Nutr. 2022;76(5):779.'
apa: 'Jansen, K., Tempes, J., Drozdowska, A., Gutmann, M., Falkenstein, M., Buyken,
A., Libuda, L., Rudolf, H., Lücke, T., & Kersting, M. (2022). Correction:
Short-term effects of carbohydrates differing in glycemic index (GI) consumed
at lunch on children’s cognitive function in a randomized crossover study. Eur
J Clin Nutr, 76(5), 779.'
bibtex: '@article{Jansen_Tempes_Drozdowska_Gutmann_Falkenstein_Buyken_Libuda_Rudolf_Lücke_Kersting_2022,
title={Correction: Short-term effects of carbohydrates differing in glycemic index
(GI) consumed at lunch on children’s cognitive function in a randomized crossover
study.}, volume={76}, number={5}, journal={Eur J Clin Nutr}, author={Jansen, K
and Tempes, J and Drozdowska, A and Gutmann, M and Falkenstein, M and Buyken,
Anette and Libuda, Lars and Rudolf, H and Lücke, T and Kersting, M}, year={2022},
pages={779} }'
chicago: 'Jansen, K, J Tempes, A Drozdowska, M Gutmann, M Falkenstein, Anette Buyken,
Lars Libuda, H Rudolf, T Lücke, and M Kersting. “Correction: Short-Term Effects
of Carbohydrates Differing in Glycemic Index (GI) Consumed at Lunch on Children’s
Cognitive Function in a Randomized Crossover Study.” Eur J Clin Nutr 76,
no. 5 (2022): 779.'
ieee: 'K. Jansen et al., “Correction: Short-term effects of carbohydrates
differing in glycemic index (GI) consumed at lunch on children’s cognitive function
in a randomized crossover study.,” Eur J Clin Nutr, vol. 76, no. 5, p.
779, 2022.'
mla: 'Jansen, K., et al. “Correction: Short-Term Effects of Carbohydrates Differing
in Glycemic Index (GI) Consumed at Lunch on Children’s Cognitive Function in a
Randomized Crossover Study.” Eur J Clin Nutr, vol. 76, no. 5, 2022, p.
779.'
short: K. Jansen, J. Tempes, A. Drozdowska, M. Gutmann, M. Falkenstein, A. Buyken,
L. Libuda, H. Rudolf, T. Lücke, M. Kersting, Eur J Clin Nutr 76 (2022) 779.
date_created: 2023-01-05T16:44:01Z
date_updated: 2023-01-05T16:48:06Z
department:
- _id: '35'
- _id: '17'
- _id: '22'
- _id: '571'
- _id: '395'
external_id:
pmid:
- '34837056'
intvolume: ' 76'
issue: '5'
language:
- iso: eng
page: '779'
pmid: '1'
publication: Eur J Clin Nutr
publication_identifier:
issn:
- 0954-3007
- 1476-5640
status: public
title: 'Correction: Short-term effects of carbohydrates differing in glycemic index
(GI) consumed at lunch on children''s cognitive function in a randomized crossover
study.'
type: journal_article
user_id: '61597'
volume: 76
year: '2022'
...
---
_id: '35307'
author:
- first_name: S
full_name: Vinoy, S
last_name: Vinoy
- first_name: J
full_name: Goletzke, J
last_name: Goletzke
- first_name: M
full_name: Rakhshandehroo, M
last_name: Rakhshandehroo
- first_name: L
full_name: Schweitzer, L
last_name: Schweitzer
- first_name: M
full_name: Flourakis, M
last_name: Flourakis
- first_name: A
full_name: Körner, A
last_name: Körner
- first_name: U
full_name: Alexy, U
last_name: Alexy
- first_name: EM
full_name: van Schothorst, EM
last_name: van Schothorst
- first_name: A
full_name: Ceriello, A
last_name: Ceriello
- first_name: JK
full_name: Zakrzewski-Fruer, JK
last_name: Zakrzewski-Fruer
- first_name: Anette
full_name: Buyken, Anette
id: '65985'
last_name: Buyken
citation:
ama: 'Vinoy S, Goletzke J, Rakhshandehroo M, et al. Health relevance of lowering
postprandial glycaemia in the paediatric population through diet’: results from
a multistakeholder workshop. Eur J Nutr. Published online 2022.'
apa: 'Vinoy, S., Goletzke, J., Rakhshandehroo, M., Schweitzer, L., Flourakis, M.,
Körner, A., Alexy, U., van Schothorst, E., Ceriello, A., Zakrzewski-Fruer, J.,
& Buyken, A. (2022). Health relevance of lowering postprandial glycaemia in
the paediatric population through diet’: results from a multistakeholder workshop.
Eur J Nutr.'
bibtex: '@article{Vinoy_Goletzke_Rakhshandehroo_Schweitzer_Flourakis_Körner_Alexy_van
Schothorst_Ceriello_Zakrzewski-Fruer_et al._2022, title={Health relevance of lowering
postprandial glycaemia in the paediatric population through diet’: results from
a multistakeholder workshop.}, journal={Eur J Nutr}, author={Vinoy, S and Goletzke,
J and Rakhshandehroo, M and Schweitzer, L and Flourakis, M and Körner, A and Alexy,
U and van Schothorst, EM and Ceriello, A and Zakrzewski-Fruer, JK and et al.},
year={2022} }'
chicago: 'Vinoy, S, J Goletzke, M Rakhshandehroo, L Schweitzer, M Flourakis, A Körner,
U Alexy, et al. “Health Relevance of Lowering Postprandial Glycaemia in the Paediatric
Population through Diet’: Results from a Multistakeholder Workshop.” Eur J
Nutr, 2022.'
ieee: 'S. Vinoy et al., “Health relevance of lowering postprandial glycaemia
in the paediatric population through diet’: results from a multistakeholder workshop.,”
Eur J Nutr, 2022.'
mla: 'Vinoy, S., et al. “Health Relevance of Lowering Postprandial Glycaemia in
the Paediatric Population through Diet’: Results from a Multistakeholder Workshop.”
Eur J Nutr, 2022.'
short: S. Vinoy, J. Goletzke, M. Rakhshandehroo, L. Schweitzer, M. Flourakis, A.
Körner, U. Alexy, E. van Schothorst, A. Ceriello, J. Zakrzewski-Fruer, A. Buyken,
Eur J Nutr (2022).
date_created: 2023-01-05T16:28:54Z
date_updated: 2023-01-05T16:47:32Z
department:
- _id: '35'
- _id: '17'
- _id: '22'
- _id: '571'
external_id:
pmid:
- '36534178'
language:
- iso: eng
pmid: '1'
publication: Eur J Nutr
publication_identifier:
issn:
- 1436-6207
- 1436-6215
status: public
title: 'Health relevance of lowering postprandial glycaemia in the paediatric population
through diet'': results from a multistakeholder workshop.'
type: journal_article
user_id: '61597'
year: '2022'
...