[{"language":[{"iso":"ger"}],"keyword":["Mechanical Engineering"],"publication":"Konstruktion","abstract":[{"lang":"ger","text":"Simulationen können Entwicklungsprozesse für individualisierte Federkraftbremsen zielgerichtet unterstützen. Die Herausforderung besteht dabei in der Vielzahl der unterschiedlichen physikalischen Effekte, die in Federkraftbremsen miteinander in Wechselwirkung stehen. Dieser Artikel beschreibt einen Ansatz für die Simulation des Schaltverhaltens von Federkraftbremsen unter Berücksichtigung der Elektrizität, des Magnetismus, der Mechanik, der Thermodynamik und der Thermodilatation in einem gemeinsamen Modell. Eine experimentelle Validierung weist die Gültigkeit des Modells nach. "}],"date_created":"2022-12-12T13:42:06Z","publisher":"VDI Fachmedien GmbH and Co. KG","title":"Multidomänensimulation des Schaltverhaltens von Federkraftbremsen","issue":"11-12","quality_controlled":"1","year":"2022","user_id":"38077","department":[{"_id":"146"}],"_id":"34400","type":"journal_article","status":"public","author":[{"first_name":"Lars Martin","last_name":"Blumenthal","full_name":"Blumenthal, Lars Martin","id":"27566"},{"last_name":"Zimmer","id":"604","full_name":"Zimmer, Detmar","first_name":"Detmar"}],"volume":74,"date_updated":"2023-04-27T12:03:40Z","doi":"10.37544/0720-5953-2022-11-12-78","publication_status":"published","publication_identifier":{"issn":["0720-5953"]},"citation":{"chicago":"Blumenthal, Lars Martin, and Detmar Zimmer. “Multidomänensimulation des Schaltverhaltens von Federkraftbremsen.” <i>Konstruktion</i> 74, no. 11–12 (2022): 78–86. <a href=\"https://doi.org/10.37544/0720-5953-2022-11-12-78\">https://doi.org/10.37544/0720-5953-2022-11-12-78</a>.","ieee":"L. M. Blumenthal and D. Zimmer, “Multidomänensimulation des Schaltverhaltens von Federkraftbremsen,” <i>Konstruktion</i>, vol. 74, no. 11–12, pp. 78–86, 2022, doi: <a href=\"https://doi.org/10.37544/0720-5953-2022-11-12-78\">10.37544/0720-5953-2022-11-12-78</a>.","ama":"Blumenthal LM, Zimmer D. Multidomänensimulation des Schaltverhaltens von Federkraftbremsen. <i>Konstruktion</i>. 2022;74(11-12):78-86. doi:<a href=\"https://doi.org/10.37544/0720-5953-2022-11-12-78\">10.37544/0720-5953-2022-11-12-78</a>","mla":"Blumenthal, Lars Martin, and Detmar Zimmer. “Multidomänensimulation des Schaltverhaltens von Federkraftbremsen.” <i>Konstruktion</i>, vol. 74, no. 11–12, VDI Fachmedien GmbH and Co. KG, 2022, pp. 78–86, doi:<a href=\"https://doi.org/10.37544/0720-5953-2022-11-12-78\">10.37544/0720-5953-2022-11-12-78</a>.","bibtex":"@article{Blumenthal_Zimmer_2022, title={Multidomänensimulation des Schaltverhaltens von Federkraftbremsen}, volume={74}, DOI={<a href=\"https://doi.org/10.37544/0720-5953-2022-11-12-78\">10.37544/0720-5953-2022-11-12-78</a>}, number={11–12}, journal={Konstruktion}, publisher={VDI Fachmedien GmbH and Co. KG}, author={Blumenthal, Lars Martin and Zimmer, Detmar}, year={2022}, pages={78–86} }","short":"L.M. Blumenthal, D. Zimmer, Konstruktion 74 (2022) 78–86.","apa":"Blumenthal, L. M., &#38; Zimmer, D. (2022). Multidomänensimulation des Schaltverhaltens von Federkraftbremsen. <i>Konstruktion</i>, <i>74</i>(11–12), 78–86. <a href=\"https://doi.org/10.37544/0720-5953-2022-11-12-78\">https://doi.org/10.37544/0720-5953-2022-11-12-78</a>"},"intvolume":"        74","page":"78-86"},{"type":"conference","publication":"Proceedings of the 12th International Conference on Simulation and Modeling Methodologies, Technologies and Applications","status":"public","_id":"33981","user_id":"552","department":[{"_id":"153"},{"_id":"241"}],"language":[{"iso":"eng"}],"publication_status":"published","quality_controlled":"1","year":"2022","citation":{"apa":"Ehlert, M., Henke, C., &#38; Trächtler, A. (2022). Analysis of Differential Algebraic Equation Systems for Connecting Energy Storages of Generally Valid Functional Mock-up Units. <i>Proceedings of the 12th International Conference on Simulation and Modeling Methodologies, Technologies and Applications</i>. <a href=\"https://doi.org/10.5220/0011305700003274\">https://doi.org/10.5220/0011305700003274</a>","mla":"Ehlert, Meik, et al. “Analysis of Differential Algebraic Equation Systems for Connecting Energy Storages of Generally Valid Functional Mock-up Units.” <i>Proceedings of the 12th International Conference on Simulation and Modeling Methodologies, Technologies and Applications</i>, SCITEPRESS - Science and Technology Publications, 2022, doi:<a href=\"https://doi.org/10.5220/0011305700003274\">10.5220/0011305700003274</a>.","short":"M. Ehlert, C. Henke, A. Trächtler, in: Proceedings of the 12th International Conference on Simulation and Modeling Methodologies, Technologies and Applications, SCITEPRESS - Science and Technology Publications, 2022.","bibtex":"@inproceedings{Ehlert_Henke_Trächtler_2022, title={Analysis of Differential Algebraic Equation Systems for Connecting Energy Storages of Generally Valid Functional Mock-up Units}, DOI={<a href=\"https://doi.org/10.5220/0011305700003274\">10.5220/0011305700003274</a>}, booktitle={Proceedings of the 12th International Conference on Simulation and Modeling Methodologies, Technologies and Applications}, publisher={SCITEPRESS - Science and Technology Publications}, author={Ehlert, Meik and Henke, Christian and Trächtler, Ansgar}, year={2022} }","ama":"Ehlert M, Henke C, Trächtler A. Analysis of Differential Algebraic Equation Systems for Connecting Energy Storages of Generally Valid Functional Mock-up Units. In: <i>Proceedings of the 12th International Conference on Simulation and Modeling Methodologies, Technologies and Applications</i>. SCITEPRESS - Science and Technology Publications; 2022. doi:<a href=\"https://doi.org/10.5220/0011305700003274\">10.5220/0011305700003274</a>","chicago":"Ehlert, Meik, Christian Henke, and Ansgar Trächtler. “Analysis of Differential Algebraic Equation Systems for Connecting Energy Storages of Generally Valid Functional Mock-up Units.” In <i>Proceedings of the 12th International Conference on Simulation and Modeling Methodologies, Technologies and Applications</i>. SCITEPRESS - Science and Technology Publications, 2022. <a href=\"https://doi.org/10.5220/0011305700003274\">https://doi.org/10.5220/0011305700003274</a>.","ieee":"M. Ehlert, C. Henke, and A. Trächtler, “Analysis of Differential Algebraic Equation Systems for Connecting Energy Storages of Generally Valid Functional Mock-up Units,” 2022, doi: <a href=\"https://doi.org/10.5220/0011305700003274\">10.5220/0011305700003274</a>."},"date_updated":"2023-04-27T12:04:12Z","publisher":"SCITEPRESS - Science and Technology Publications","date_created":"2022-11-02T17:08:19Z","author":[{"first_name":"Meik","full_name":"Ehlert, Meik","last_name":"Ehlert"},{"first_name":"Christian","last_name":"Henke","full_name":"Henke, Christian"},{"first_name":"Ansgar","full_name":"Trächtler, Ansgar","id":"552","last_name":"Trächtler"}],"title":"Analysis of Differential Algebraic Equation Systems for Connecting Energy Storages of Generally Valid Functional Mock-up Units","doi":"10.5220/0011305700003274"},{"date_updated":"2023-04-27T11:56:55Z","oa":"1","author":[{"first_name":"Sven","id":"13195","full_name":"Mertin, Sven","last_name":"Mertin"}],"date_created":"2023-02-14T11:01:04Z","supervisor":[{"first_name":"Ansgar","full_name":"Trächtler, Ansgar","id":"552","last_name":"Trächtler"}],"title":"Konzept für ein hierarchisches autonomes Verkehrsmanagement","main_file_link":[{"open_access":"1","url":"https://digital.ub.uni-paderborn.de/doi/10.17619/UNIPB/1-1623"}],"publication_status":"published","year":"2022","citation":{"apa":"Mertin, S. (2022). <i>Konzept für ein hierarchisches autonomes Verkehrsmanagement</i>.","bibtex":"@book{Mertin_2022, title={Konzept für ein hierarchisches autonomes Verkehrsmanagement}, author={Mertin, Sven}, year={2022} }","mla":"Mertin, Sven. <i>Konzept für ein hierarchisches autonomes Verkehrsmanagement</i>. 2022.","short":"S. Mertin, Konzept für ein hierarchisches autonomes Verkehrsmanagement, 2022.","ama":"Mertin S. <i>Konzept für ein hierarchisches autonomes Verkehrsmanagement</i>.; 2022.","ieee":"S. Mertin, <i>Konzept für ein hierarchisches autonomes Verkehrsmanagement</i>. 2022.","chicago":"Mertin, Sven. <i>Konzept für ein hierarchisches autonomes Verkehrsmanagement</i>, 2022."},"_id":"42071","user_id":"552","department":[{"_id":"153"}],"language":[{"iso":"ger"}],"type":"dissertation","status":"public"},{"language":[{"iso":"eng"}],"_id":"30263","department":[{"_id":"241"},{"_id":"156"},{"_id":"153"}],"user_id":"552","abstract":[{"text":"High-strength wire materials are usually available as strip material which is further processed in a forming process (e.g. punch-bending). For storage and transport of the semi-finished wire to the customer, the material is wound onto coils. The manufacturing and coiling process introduces plastic deformations into the wire, which lead to undesirable residual stresses and wire curvature of the semi-finished product. These residual stresses and curvatures cause variations in the material properties of the semi-finished product, which have a negative impact on the subsequent product quality. Straightening machines are used to compensate the residual stresses and the curvature in the wire. At the beginning of the straightening process, the straightening machines must be set up in such a way that residual stresses and curvatures are optimally compensated. This setup process is usually a manual and iterative process, where a lot of material is wasted until the optimal settings for the straightening machine are found.In order to reduce the amount of material waste, the operator must be supported in the setup process. In this context, a new and innovative setup assistance system was developed to support the operator during the setup process. The setup assistant system automatically detects the wire curvature by means of an optical measuring system. Based on the optically detected measuring points, the wire curvature is determined by a robust calculation algorithm. Based on a database built up through the carried out experimental and numerical research work, the optimum setting parameters for the straightening machine are suggested to the operator without lengthy trial and error. After confirmation by the operator, the roller settings are automatically adjusted by the mechatronic straightening machine. With the presented method, the conventional iterative setup procedure can be made more resource-efficient and a high straightening quality can be reproducibly achieved. ","lang":"eng"}],"status":"public","type":"conference","title":"Innovative assistance system for setting up a mechatronic straightening machine","doi":"https://doi.org/10.4028/p-vs07w9","conference":{"name":"ESAFORM 2022","start_date":"2022-04-26","end_date":"2022-04-29","location":"Braga / Portugal"},"date_updated":"2023-04-27T12:06:58Z","author":[{"first_name":"Lukas","last_name":"Bathelt","full_name":"Bathelt, Lukas"},{"full_name":"Bader, Fabian","id":"65204","last_name":"Bader","first_name":"Fabian"},{"last_name":"Djakow","full_name":"Djakow, Eugen","id":"7904","first_name":"Eugen"},{"first_name":"Christian","full_name":"Henke, Christian","last_name":"Henke"},{"last_name":"Trächtler","full_name":"Trächtler, Ansgar","id":"552","first_name":"Ansgar"},{"first_name":"Werner","last_name":"Homberg","full_name":"Homberg, Werner"}],"date_created":"2022-03-11T11:03:06Z","year":"2022","citation":{"ama":"Bathelt L, Bader F, Djakow E, Henke C, Trächtler A, Homberg W. Innovative assistance system for setting up a mechatronic straightening machine. In: ; 2022. doi:<a href=\"https://doi.org/10.4028/p-vs07w9\">https://doi.org/10.4028/p-vs07w9</a>","chicago":"Bathelt, Lukas, Fabian Bader, Eugen Djakow, Christian Henke, Ansgar Trächtler, and Werner Homberg. “Innovative Assistance System for Setting up a Mechatronic Straightening Machine,” 2022. <a href=\"https://doi.org/10.4028/p-vs07w9\">https://doi.org/10.4028/p-vs07w9</a>.","ieee":"L. Bathelt, F. Bader, E. Djakow, C. Henke, A. Trächtler, and W. Homberg, “Innovative assistance system for setting up a mechatronic straightening machine,” presented at the ESAFORM 2022, Braga / Portugal, 2022, doi: <a href=\"https://doi.org/10.4028/p-vs07w9\">https://doi.org/10.4028/p-vs07w9</a>.","short":"L. Bathelt, F. Bader, E. Djakow, C. Henke, A. Trächtler, W. Homberg, in: 2022.","mla":"Bathelt, Lukas, et al. <i>Innovative Assistance System for Setting up a Mechatronic Straightening Machine</i>. 2022, doi:<a href=\"https://doi.org/10.4028/p-vs07w9\">https://doi.org/10.4028/p-vs07w9</a>.","bibtex":"@inproceedings{Bathelt_Bader_Djakow_Henke_Trächtler_Homberg_2022, title={Innovative assistance system for setting up a mechatronic straightening machine}, DOI={<a href=\"https://doi.org/10.4028/p-vs07w9\">https://doi.org/10.4028/p-vs07w9</a>}, author={Bathelt, Lukas and Bader, Fabian and Djakow, Eugen and Henke, Christian and Trächtler, Ansgar and Homberg, Werner}, year={2022} }","apa":"Bathelt, L., Bader, F., Djakow, E., Henke, C., Trächtler, A., &#38; Homberg, W. (2022). <i>Innovative assistance system for setting up a mechatronic straightening machine</i>. ESAFORM 2022, Braga / Portugal. <a href=\"https://doi.org/10.4028/p-vs07w9\">https://doi.org/10.4028/p-vs07w9</a>"},"quality_controlled":"1"},{"language":[{"iso":"eng"}],"_id":"30265","user_id":"552","department":[{"_id":"156"},{"_id":"241"},{"_id":"153"}],"abstract":[{"text":"Due to increasing globalization and rising quality requirements, the steel and metal processing industry is facing growing cost and innovation pressure. Not least because of their high lightweight potential, high-strength steel materials are meeting the growing material requirements of steel and metal processing in areas such as aerospace and medical technology. In particular, the tight tolerance limits of applicable shape and dimensional accuracies pose a challenge in the processing of high-strength steel strip materials. Improving the processability of high-strength steel materials through the use of straighteners with set-up assistance systems significantly increases the potential for competing with other materials such as aluminum or magnesium alloys. ","lang":"eng"}],"status":"public","type":"conference","title":"An approach for an innovative 3d steel strip straightening machine for curvature and saber compensation","doi":"https://doi.org/10.4028/p-87wvu0","conference":{"start_date":"2022-04-26","name":"ESAFORM 2022","location":"Braga / Portugal","end_date":"2022-04-29"},"date_updated":"2023-04-27T12:06:39Z","date_created":"2022-03-11T11:08:06Z","author":[{"first_name":"Fabian","last_name":"Bader","full_name":"Bader, Fabian","id":"65204"},{"last_name":"Bathelt","full_name":"Bathelt, Lukas","first_name":"Lukas"},{"full_name":"Djakow, Eugen","id":"7904","last_name":"Djakow","first_name":"Eugen"},{"full_name":"Henke, Christian","last_name":"Henke","first_name":"Christian"},{"first_name":"Werner","full_name":"Homberg, Werner","last_name":"Homberg"},{"first_name":"Ansgar","last_name":"Trächtler","id":"552","full_name":"Trächtler, Ansgar"}],"year":"2022","citation":{"apa":"Bader, F., Bathelt, L., Djakow, E., Henke, C., Homberg, W., &#38; Trächtler, A. (2022). <i>An approach for an innovative 3d steel strip straightening machine for curvature and saber compensation</i>. ESAFORM 2022, Braga / Portugal. <a href=\"https://doi.org/10.4028/p-87wvu0\">https://doi.org/10.4028/p-87wvu0</a>","short":"F. Bader, L. Bathelt, E. Djakow, C. Henke, W. Homberg, A. Trächtler, in: 2022.","bibtex":"@inproceedings{Bader_Bathelt_Djakow_Henke_Homberg_Trächtler_2022, title={An approach for an innovative 3d steel strip straightening machine for curvature and saber compensation}, DOI={<a href=\"https://doi.org/10.4028/p-87wvu0\">https://doi.org/10.4028/p-87wvu0</a>}, author={Bader, Fabian and Bathelt, Lukas and Djakow, Eugen and Henke, Christian and Homberg, Werner and Trächtler, Ansgar}, year={2022} }","mla":"Bader, Fabian, et al. <i>An Approach for an Innovative 3d Steel Strip Straightening Machine for Curvature and Saber Compensation</i>. 2022, doi:<a href=\"https://doi.org/10.4028/p-87wvu0\">https://doi.org/10.4028/p-87wvu0</a>.","ama":"Bader F, Bathelt L, Djakow E, Henke C, Homberg W, Trächtler A. An approach for an innovative 3d steel strip straightening machine for curvature and saber compensation. In: ; 2022. doi:<a href=\"https://doi.org/10.4028/p-87wvu0\">https://doi.org/10.4028/p-87wvu0</a>","ieee":"F. Bader, L. Bathelt, E. Djakow, C. Henke, W. Homberg, and A. Trächtler, “An approach for an innovative 3d steel strip straightening machine for curvature and saber compensation,” presented at the ESAFORM 2022, Braga / Portugal, 2022, doi: <a href=\"https://doi.org/10.4028/p-87wvu0\">https://doi.org/10.4028/p-87wvu0</a>.","chicago":"Bader, Fabian, Lukas Bathelt, Eugen Djakow, Christian Henke, Werner Homberg, and Ansgar Trächtler. “An Approach for an Innovative 3d Steel Strip Straightening Machine for Curvature and Saber Compensation,” 2022. <a href=\"https://doi.org/10.4028/p-87wvu0\">https://doi.org/10.4028/p-87wvu0</a>."},"quality_controlled":"1"},{"department":[{"_id":"153"},{"_id":"241"}],"user_id":"552","_id":"33982","type":"journal_article","status":"public","volume":55,"author":[{"first_name":"Steven","last_name":"Koppert","full_name":"Koppert, Steven"},{"first_name":"Christian","last_name":"Henke","full_name":"Henke, Christian"},{"full_name":"Trächtler, Ansgar","id":"552","last_name":"Trächtler","first_name":"Ansgar"},{"full_name":"Möhringer, Stefan","last_name":"Möhringer","first_name":"Stefan"}],"date_updated":"2023-04-27T12:04:32Z","doi":"10.1016/j.ifacol.2022.04.252","publication_identifier":{"issn":["2405-8963"]},"publication_status":"published","intvolume":"        55","page":"554-560","citation":{"apa":"Koppert, S., Henke, C., Trächtler, A., &#38; Möhringer, S. (2022). Tool Wear Monitoring of a Tree Log Bandsaw using a Deep Convolutional Neural Network on challenging data. <i>IFAC-PapersOnLine</i>, <i>55</i>(2), 554–560. <a href=\"https://doi.org/10.1016/j.ifacol.2022.04.252\">https://doi.org/10.1016/j.ifacol.2022.04.252</a>","bibtex":"@article{Koppert_Henke_Trächtler_Möhringer_2022, title={Tool Wear Monitoring of a Tree Log Bandsaw using a Deep Convolutional Neural Network on challenging data}, volume={55}, DOI={<a href=\"https://doi.org/10.1016/j.ifacol.2022.04.252\">10.1016/j.ifacol.2022.04.252</a>}, number={2}, journal={IFAC-PapersOnLine}, publisher={Elsevier BV}, author={Koppert, Steven and Henke, Christian and Trächtler, Ansgar and Möhringer, Stefan}, year={2022}, pages={554–560} }","mla":"Koppert, Steven, et al. “Tool Wear Monitoring of a Tree Log Bandsaw Using a Deep Convolutional Neural Network on Challenging Data.” <i>IFAC-PapersOnLine</i>, vol. 55, no. 2, Elsevier BV, 2022, pp. 554–60, doi:<a href=\"https://doi.org/10.1016/j.ifacol.2022.04.252\">10.1016/j.ifacol.2022.04.252</a>.","short":"S. Koppert, C. Henke, A. Trächtler, S. Möhringer, IFAC-PapersOnLine 55 (2022) 554–560.","ama":"Koppert S, Henke C, Trächtler A, Möhringer S. Tool Wear Monitoring of a Tree Log Bandsaw using a Deep Convolutional Neural Network on challenging data. <i>IFAC-PapersOnLine</i>. 2022;55(2):554-560. doi:<a href=\"https://doi.org/10.1016/j.ifacol.2022.04.252\">10.1016/j.ifacol.2022.04.252</a>","chicago":"Koppert, Steven, Christian Henke, Ansgar Trächtler, and Stefan Möhringer. “Tool Wear Monitoring of a Tree Log Bandsaw Using a Deep Convolutional Neural Network on Challenging Data.” <i>IFAC-PapersOnLine</i> 55, no. 2 (2022): 554–60. <a href=\"https://doi.org/10.1016/j.ifacol.2022.04.252\">https://doi.org/10.1016/j.ifacol.2022.04.252</a>.","ieee":"S. Koppert, C. Henke, A. Trächtler, and S. Möhringer, “Tool Wear Monitoring of a Tree Log Bandsaw using a Deep Convolutional Neural Network on challenging data,” <i>IFAC-PapersOnLine</i>, vol. 55, no. 2, pp. 554–560, 2022, doi: <a href=\"https://doi.org/10.1016/j.ifacol.2022.04.252\">10.1016/j.ifacol.2022.04.252</a>."},"language":[{"iso":"eng"}],"keyword":["Control and Systems Engineering"],"publication":"IFAC-PapersOnLine","date_created":"2022-11-02T17:19:30Z","publisher":"Elsevier BV","title":"Tool Wear Monitoring of a Tree Log Bandsaw using a Deep Convolutional Neural Network on challenging data","issue":"2","quality_controlled":"1","year":"2022"},{"status":"public","publication":"IEEE Open Journal of Industry Applications","type":"journal_article","language":[{"iso":"eng"}],"department":[{"_id":"52"},{"_id":"146"}],"user_id":"38077","_id":"31085","citation":{"mla":"Brosch, Anian, et al. “Data-Driven Adaptive Torque Oscillation Compensation for Multi-Motor Drive Systems.” <i>IEEE Open Journal of Industry Applications</i>, Institute of Electrical and Electronics Engineers (IEEE), 2022, doi:<a href=\"https://doi.org/10.1109/ojia.2022.3171333\">10.1109/ojia.2022.3171333</a>.","short":"A. Brosch, J. Rauhaus, O. Wallscheid, J. Böcker, D. Zimmer, IEEE Open Journal of Industry Applications (2022).","bibtex":"@article{Brosch_Rauhaus_Wallscheid_Böcker_Zimmer_2022, title={Data-Driven Adaptive Torque Oscillation Compensation for Multi-Motor Drive Systems}, DOI={<a href=\"https://doi.org/10.1109/ojia.2022.3171333\">10.1109/ojia.2022.3171333</a>}, journal={IEEE Open Journal of Industry Applications}, publisher={Institute of Electrical and Electronics Engineers (IEEE)}, author={Brosch, Anian and Rauhaus, Johann and Wallscheid, Oliver and Böcker, Joachim and Zimmer, Detmar}, year={2022} }","apa":"Brosch, A., Rauhaus, J., Wallscheid, O., Böcker, J., &#38; Zimmer, D. (2022). Data-Driven Adaptive Torque Oscillation Compensation for Multi-Motor Drive Systems. <i>IEEE Open Journal of Industry Applications</i>. <a href=\"https://doi.org/10.1109/ojia.2022.3171333\">https://doi.org/10.1109/ojia.2022.3171333</a>","ieee":"A. Brosch, J. Rauhaus, O. Wallscheid, J. Böcker, and D. Zimmer, “Data-Driven Adaptive Torque Oscillation Compensation for Multi-Motor Drive Systems,” <i>IEEE Open Journal of Industry Applications</i>, 2022, doi: <a href=\"https://doi.org/10.1109/ojia.2022.3171333\">10.1109/ojia.2022.3171333</a>.","chicago":"Brosch, Anian, Johann Rauhaus, Oliver Wallscheid, Joachim Böcker, and Detmar Zimmer. “Data-Driven Adaptive Torque Oscillation Compensation for Multi-Motor Drive Systems.” <i>IEEE Open Journal of Industry Applications</i>, 2022. <a href=\"https://doi.org/10.1109/ojia.2022.3171333\">https://doi.org/10.1109/ojia.2022.3171333</a>.","ama":"Brosch A, Rauhaus J, Wallscheid O, Böcker J, Zimmer D. Data-Driven Adaptive Torque Oscillation Compensation for Multi-Motor Drive Systems. <i>IEEE Open Journal of Industry Applications</i>. Published online 2022. doi:<a href=\"https://doi.org/10.1109/ojia.2022.3171333\">10.1109/ojia.2022.3171333</a>"},"year":"2022","publication_identifier":{"issn":["2644-1241"]},"quality_controlled":"1","publication_status":"published","doi":"10.1109/ojia.2022.3171333","title":"Data-Driven Adaptive Torque Oscillation Compensation for Multi-Motor Drive Systems","date_created":"2022-05-09T08:52:27Z","author":[{"first_name":"Anian","id":"75779","full_name":"Brosch, Anian","orcid":"0000-0003-4871-1664","last_name":"Brosch"},{"full_name":"Rauhaus, Johann","id":"63776","last_name":"Rauhaus","first_name":"Johann"},{"orcid":"https://orcid.org/0000-0001-9362-8777","last_name":"Wallscheid","id":"11291","full_name":"Wallscheid, Oliver","first_name":"Oliver"},{"first_name":"Joachim","id":"66","full_name":"Böcker, Joachim","orcid":"0000-0002-8480-7295","last_name":"Böcker"},{"last_name":"Zimmer","full_name":"Zimmer, Detmar","id":"604","first_name":"Detmar"}],"date_updated":"2023-04-27T12:04:22Z","publisher":"Institute of Electrical and Electronics Engineers (IEEE)"},{"publication":"Fachtagung VDI MECHATRONIK 2022 ","type":"conference","status":"public","_id":"33978","department":[{"_id":"153"},{"_id":"241"},{"_id":"153"}],"user_id":"552","language":[{"iso":"eng"}],"quality_controlled":"1","year":"2022","place":"Darmstadt","page":"19-24","citation":{"short":"L. Bathelt, F. Bader, E. Djakow, C. Henke, A. Trächtler, W. Homberg, in: Fachtagung VDI MECHATRONIK 2022 , Darmstadt, 2022, pp. 19–24.","mla":"Bathelt, Lukas, et al. “Mechatronische Richtapparate: Intelligente Richttechnik von Hochfesten Flachdrähten.” <i>Fachtagung VDI MECHATRONIK 2022 </i>, 2022, pp. 19–24.","bibtex":"@inproceedings{Bathelt_Bader_Djakow_Henke_Trächtler_Homberg_2022, place={Darmstadt}, title={Mechatronische Richtapparate: Intelligente Richttechnik von hochfesten Flachdrähten}, booktitle={Fachtagung VDI MECHATRONIK 2022 }, author={Bathelt, Lukas and Bader, Fabian and Djakow, Eugen and Henke, Christian and Trächtler, Ansgar and Homberg, Werner}, year={2022}, pages={19–24} }","apa":"Bathelt, L., Bader, F., Djakow, E., Henke, C., Trächtler, A., &#38; Homberg, W. (2022). Mechatronische Richtapparate: Intelligente Richttechnik von hochfesten Flachdrähten. <i>Fachtagung VDI MECHATRONIK 2022 </i>, 19–24.","chicago":"Bathelt, Lukas, Fabian Bader, Eugen Djakow, Christian Henke, Ansgar Trächtler, and Werner Homberg. “Mechatronische Richtapparate: Intelligente Richttechnik von Hochfesten Flachdrähten.” In <i>Fachtagung VDI MECHATRONIK 2022 </i>, 19–24. Darmstadt, 2022.","ieee":"L. Bathelt, F. Bader, E. Djakow, C. Henke, A. Trächtler, and W. Homberg, “Mechatronische Richtapparate: Intelligente Richttechnik von hochfesten Flachdrähten,” in <i>Fachtagung VDI MECHATRONIK 2022 </i>, Darmstadt, 2022, pp. 19–24.","ama":"Bathelt L, Bader F, Djakow E, Henke C, Trächtler A, Homberg W. Mechatronische Richtapparate: Intelligente Richttechnik von hochfesten Flachdrähten. In: <i>Fachtagung VDI MECHATRONIK 2022 </i>. ; 2022:19-24."},"date_updated":"2023-04-27T12:07:25Z","author":[{"first_name":"Lukas","last_name":"Bathelt","full_name":"Bathelt, Lukas"},{"first_name":"Fabian","full_name":"Bader, Fabian","id":"65204","last_name":"Bader"},{"first_name":"Eugen","last_name":"Djakow","full_name":"Djakow, Eugen","id":"7904"},{"last_name":"Henke","full_name":"Henke, Christian","first_name":"Christian"},{"first_name":"Ansgar","last_name":"Trächtler","full_name":"Trächtler, Ansgar","id":"552"},{"last_name":"Homberg","full_name":"Homberg, Werner","first_name":"Werner"}],"date_created":"2022-11-02T16:51:32Z","title":"Mechatronische Richtapparate: Intelligente Richttechnik von hochfesten Flachdrähten","conference":{"start_date":"2022-03-23","name":"Fachtagung VDI MECHATRONIK 2022","location":"Darmstadt","end_date":"2022-03-24"}},{"year":"2022","page":"1-8","citation":{"short":"S. Schütz, R. Schmidt, C. Henke, A. Trächtler, in: 2022 IEEE International Systems Conference (SysCon), IEEE, 2022, pp. 1–8.","mla":"Schütz, Stefan, et al. “Virtual Commissioning of the Trajectory Tracking Control of a Sensor-Guided, Kinematically Redundant Robotic Welding System on a PLC.” <i>2022 IEEE International Systems Conference (SysCon)</i>, IEEE, 2022, pp. 1–8, doi:<a href=\"https://doi.org/10.1109/syscon53536.2022.9773878\">10.1109/syscon53536.2022.9773878</a>.","bibtex":"@inproceedings{Schütz_Schmidt_Henke_Trächtler_2022, title={Virtual Commissioning of the Trajectory Tracking Control of a Sensor-Guided, Kinematically Redundant Robotic Welding System on a PLC}, DOI={<a href=\"https://doi.org/10.1109/syscon53536.2022.9773878\">10.1109/syscon53536.2022.9773878</a>}, booktitle={2022 IEEE International Systems Conference (SysCon)}, publisher={IEEE}, author={Schütz, Stefan and Schmidt, Robin and Henke, Christian and Trächtler, Ansgar}, year={2022}, pages={1–8} }","apa":"Schütz, S., Schmidt, R., Henke, C., &#38; Trächtler, A. (2022). Virtual Commissioning of the Trajectory Tracking Control of a Sensor-Guided, Kinematically Redundant Robotic Welding System on a PLC. <i>2022 IEEE International Systems Conference (SysCon)</i>, 1–8. <a href=\"https://doi.org/10.1109/syscon53536.2022.9773878\">https://doi.org/10.1109/syscon53536.2022.9773878</a>","ieee":"S. Schütz, R. Schmidt, C. Henke, and A. Trächtler, “Virtual Commissioning of the Trajectory Tracking Control of a Sensor-Guided, Kinematically Redundant Robotic Welding System on a PLC,” in <i>2022 IEEE International Systems Conference (SysCon)</i>, Montreal, QC, Canada, 2022, pp. 1–8, doi: <a href=\"https://doi.org/10.1109/syscon53536.2022.9773878\">10.1109/syscon53536.2022.9773878</a>.","chicago":"Schütz, Stefan, Robin Schmidt, Christian Henke, and Ansgar Trächtler. “Virtual Commissioning of the Trajectory Tracking Control of a Sensor-Guided, Kinematically Redundant Robotic Welding System on a PLC.” In <i>2022 IEEE International Systems Conference (SysCon)</i>, 1–8. IEEE, 2022. <a href=\"https://doi.org/10.1109/syscon53536.2022.9773878\">https://doi.org/10.1109/syscon53536.2022.9773878</a>.","ama":"Schütz S, Schmidt R, Henke C, Trächtler A. Virtual Commissioning of the Trajectory Tracking Control of a Sensor-Guided, Kinematically Redundant Robotic Welding System on a PLC. In: <i>2022 IEEE International Systems Conference (SysCon)</i>. IEEE; 2022:1-8. doi:<a href=\"https://doi.org/10.1109/syscon53536.2022.9773878\">10.1109/syscon53536.2022.9773878</a>"},"quality_controlled":"1","publication_status":"published","title":"Virtual Commissioning of the Trajectory Tracking Control of a Sensor-Guided, Kinematically Redundant Robotic Welding System on a PLC","doi":"10.1109/syscon53536.2022.9773878","conference":{"start_date":"2022-04-25","name":"SYSCON2022: The 16th Annual IEEE International Systems Conference","location":"Montreal, QC, Canada","end_date":"2022-05-23"},"date_updated":"2023-04-27T12:08:04Z","publisher":"IEEE","author":[{"last_name":"Schütz","full_name":"Schütz, Stefan","first_name":"Stefan"},{"first_name":"Robin","last_name":"Schmidt","full_name":"Schmidt, Robin"},{"first_name":"Christian","last_name":"Henke","full_name":"Henke, Christian"},{"id":"552","full_name":"Trächtler, Ansgar","last_name":"Trächtler","first_name":"Ansgar"}],"date_created":"2022-09-22T09:52:10Z","status":"public","publication":"2022 IEEE International Systems Conference (SysCon)","type":"conference","language":[{"iso":"eng"}],"_id":"33469","department":[{"_id":"153"},{"_id":"241"}],"user_id":"552"},{"_id":"33976","user_id":"552","department":[{"_id":"153"},{"_id":"241"}],"language":[{"iso":"eng"}],"type":"conference","publication":"2022 27th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA )","status":"public","publisher":"IEEE","date_updated":"2023-04-27T12:07:44Z","author":[{"first_name":"Cederic ","full_name":"Lenz, Cederic ","last_name":"Lenz"},{"first_name":"Fabian","full_name":"Hanke, Fabian","last_name":"Hanke"},{"first_name":"Christian","full_name":"Henke, Christian","last_name":"Henke"},{"full_name":"Trächtler, Ansgar","id":"552","last_name":"Trächtler","first_name":"Ansgar"}],"date_created":"2022-11-02T16:31:47Z","title":"Anomaly Detection in Hot Forming Processes using Hybrid Modeling - Part II","conference":{"location":"Stuttgart, Germany ","end_date":"2022-09-09","start_date":"2022-09-06","name":"2022 IEEE 27th International Conference on Emerging Technologies and Factory Automation (ETFA)"},"doi":"10.1109/ETFA52439.2022.9921510","publication_status":"published","quality_controlled":"1","year":"2022","citation":{"bibtex":"@inproceedings{Lenz_Hanke_Henke_Trächtler_2022, title={Anomaly Detection in Hot Forming Processes using Hybrid Modeling - Part II}, DOI={<a href=\"https://doi.org/10.1109/ETFA52439.2022.9921510\">10.1109/ETFA52439.2022.9921510</a>}, booktitle={2022 27th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA )}, publisher={IEEE}, author={Lenz, Cederic  and Hanke, Fabian and Henke, Christian and Trächtler, Ansgar}, year={2022} }","mla":"Lenz, Cederic, et al. “Anomaly Detection in Hot Forming Processes Using Hybrid Modeling - Part II.” <i>2022 27th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA )</i>, IEEE, 2022, doi:<a href=\"https://doi.org/10.1109/ETFA52439.2022.9921510\">10.1109/ETFA52439.2022.9921510</a>.","short":"C. Lenz, F. Hanke, C. Henke, A. Trächtler, in: 2022 27th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA ), IEEE, 2022.","apa":"Lenz, C., Hanke, F., Henke, C., &#38; Trächtler, A. (2022). Anomaly Detection in Hot Forming Processes using Hybrid Modeling - Part II. <i>2022 27th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA )</i>. 2022 IEEE 27th International Conference on Emerging Technologies and Factory Automation (ETFA), Stuttgart, Germany . <a href=\"https://doi.org/10.1109/ETFA52439.2022.9921510\">https://doi.org/10.1109/ETFA52439.2022.9921510</a>","chicago":"Lenz, Cederic , Fabian Hanke, Christian Henke, and Ansgar Trächtler. “Anomaly Detection in Hot Forming Processes Using Hybrid Modeling - Part II.” In <i>2022 27th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA )</i>. IEEE, 2022. <a href=\"https://doi.org/10.1109/ETFA52439.2022.9921510\">https://doi.org/10.1109/ETFA52439.2022.9921510</a>.","ieee":"C. Lenz, F. Hanke, C. Henke, and A. Trächtler, “Anomaly Detection in Hot Forming Processes using Hybrid Modeling - Part II,” presented at the 2022 IEEE 27th International Conference on Emerging Technologies and Factory Automation (ETFA), Stuttgart, Germany , 2022, doi: <a href=\"https://doi.org/10.1109/ETFA52439.2022.9921510\">10.1109/ETFA52439.2022.9921510</a>.","ama":"Lenz C, Hanke F, Henke C, Trächtler A. Anomaly Detection in Hot Forming Processes using Hybrid Modeling - Part II. In: <i>2022 27th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA )</i>. IEEE; 2022. doi:<a href=\"https://doi.org/10.1109/ETFA52439.2022.9921510\">10.1109/ETFA52439.2022.9921510</a>"}},{"status":"public","abstract":[{"lang":"eng","text":"In timing chain drives, the chain is the critical component regarding the wear. Relative movements take place at the chain joint between pin and bush, which lead to wear of the chain joint due to friction and so to chain elongation. The chain joint is generally lubricated with oils, through which elastohydrodynamic processes can occur in the gap between the pin and the bush of the chain joint. A simulation model is developed here to examine these elastohydrodynamic processes considering a mass conserving cavitation model, the Newtonian flow behaviour of the lubricant and the structuring of the bush surface, whereby the real form of the bush is considered. MBS simulations are used to obtain realistic loads on the chain joint."}],"publication":"Tribology International","type":"journal_article","extern":"1","language":[{"iso":"eng"}],"keyword":["EHL-simulation","Cavitation","Chain drives","Chain joint","Micro-structuring"],"department":[{"_id":"146"}],"user_id":"38077","_id":"34434","intvolume":"       171","page":"107564","citation":{"chicago":"Simo Kamga, Lionel, Dominik Meffert, Balázs Magyar, Manuel Oehler, and Bernd Sauer. “Simulative Investigation of the Influence of Surface Texturing on the Elastohydrodynamic Lubrication in Chain Joints.” <i>Tribology International</i> 171 (2022): 107564. <a href=\"https://doi.org/10.1016/j.triboint.2022.107564\">https://doi.org/10.1016/j.triboint.2022.107564</a>.","ieee":"L. Simo Kamga, D. Meffert, B. Magyar, M. Oehler, and B. Sauer, “Simulative investigation of the influence of surface texturing on the elastohydrodynamic lubrication in chain joints,” <i>Tribology International</i>, vol. 171, p. 107564, 2022, doi: <a href=\"https://doi.org/10.1016/j.triboint.2022.107564\">https://doi.org/10.1016/j.triboint.2022.107564</a>.","ama":"Simo Kamga L, Meffert D, Magyar B, Oehler M, Sauer B. Simulative investigation of the influence of surface texturing on the elastohydrodynamic lubrication in chain joints. <i>Tribology International</i>. 2022;171:107564. doi:<a href=\"https://doi.org/10.1016/j.triboint.2022.107564\">https://doi.org/10.1016/j.triboint.2022.107564</a>","apa":"Simo Kamga, L., Meffert, D., Magyar, B., Oehler, M., &#38; Sauer, B. (2022). Simulative investigation of the influence of surface texturing on the elastohydrodynamic lubrication in chain joints. <i>Tribology International</i>, <i>171</i>, 107564. <a href=\"https://doi.org/10.1016/j.triboint.2022.107564\">https://doi.org/10.1016/j.triboint.2022.107564</a>","bibtex":"@article{Simo Kamga_Meffert_Magyar_Oehler_Sauer_2022, title={Simulative investigation of the influence of surface texturing on the elastohydrodynamic lubrication in chain joints}, volume={171}, DOI={<a href=\"https://doi.org/10.1016/j.triboint.2022.107564\">https://doi.org/10.1016/j.triboint.2022.107564</a>}, journal={Tribology International}, author={Simo Kamga, Lionel and Meffert, Dominik and Magyar, Balázs and Oehler, Manuel and Sauer, Bernd}, year={2022}, pages={107564} }","short":"L. Simo Kamga, D. Meffert, B. Magyar, M. Oehler, B. Sauer, Tribology International 171 (2022) 107564.","mla":"Simo Kamga, Lionel, et al. “Simulative Investigation of the Influence of Surface Texturing on the Elastohydrodynamic Lubrication in Chain Joints.” <i>Tribology International</i>, vol. 171, 2022, p. 107564, doi:<a href=\"https://doi.org/10.1016/j.triboint.2022.107564\">https://doi.org/10.1016/j.triboint.2022.107564</a>."},"year":"2022","quality_controlled":"1","publication_identifier":{"issn":["0301-679X"]},"doi":"https://doi.org/10.1016/j.triboint.2022.107564","title":"Simulative investigation of the influence of surface texturing on the elastohydrodynamic lubrication in chain joints","volume":171,"author":[{"first_name":"Lionel","full_name":"Simo Kamga, Lionel","last_name":"Simo Kamga"},{"last_name":"Meffert","full_name":"Meffert, Dominik","first_name":"Dominik"},{"full_name":"Magyar, Balázs","id":"97759","last_name":"Magyar","first_name":"Balázs"},{"first_name":"Manuel","full_name":"Oehler, Manuel","last_name":"Oehler"},{"first_name":"Bernd","full_name":"Sauer, Bernd","last_name":"Sauer"}],"date_created":"2022-12-15T09:28:48Z","date_updated":"2023-04-27T12:10:34Z"},{"_id":"44230","user_id":"71353","department":[{"_id":"52"}],"language":[{"iso":"ger"}],"type":"dissertation","status":"public","date_updated":"2023-04-27T12:11:12Z","supervisor":[{"first_name":"Joachim","id":"66","full_name":"Böcker, Joachim","orcid":"0000-0002-8480-7295","last_name":"Böcker"}],"author":[{"first_name":"Marc","full_name":"Hagemeyer, Marc","last_name":"Hagemeyer"}],"date_created":"2023-04-27T12:09:24Z","title":"Untersuchung und Entwicklung eines modularen speicherbasierten Schweißstromgenerators mit geringster Stromschwankungsbreite für das Widerstandsschweißen","doi":"10.17619/UNIPB/1-1582","year":"2022","citation":{"ieee":"M. Hagemeyer, <i>Untersuchung und Entwicklung eines modularen speicherbasierten Schweißstromgenerators mit geringster Stromschwankungsbreite für das Widerstandsschweißen</i>. 2022.","chicago":"Hagemeyer, Marc. <i>Untersuchung und Entwicklung eines modularen speicherbasierten Schweißstromgenerators mit geringster Stromschwankungsbreite für das Widerstandsschweißen</i>, 2022. <a href=\"https://doi.org/10.17619/UNIPB/1-1582\">https://doi.org/10.17619/UNIPB/1-1582</a>.","ama":"Hagemeyer M. <i>Untersuchung und Entwicklung eines modularen speicherbasierten Schweißstromgenerators mit geringster Stromschwankungsbreite für das Widerstandsschweißen</i>.; 2022. doi:<a href=\"https://doi.org/10.17619/UNIPB/1-1582\">10.17619/UNIPB/1-1582</a>","apa":"Hagemeyer, M. (2022). <i>Untersuchung und Entwicklung eines modularen speicherbasierten Schweißstromgenerators mit geringster Stromschwankungsbreite für das Widerstandsschweißen</i>. <a href=\"https://doi.org/10.17619/UNIPB/1-1582\">https://doi.org/10.17619/UNIPB/1-1582</a>","bibtex":"@book{Hagemeyer_2022, title={Untersuchung und Entwicklung eines modularen speicherbasierten Schweißstromgenerators mit geringster Stromschwankungsbreite für das Widerstandsschweißen}, DOI={<a href=\"https://doi.org/10.17619/UNIPB/1-1582\">10.17619/UNIPB/1-1582</a>}, author={Hagemeyer, Marc}, year={2022} }","mla":"Hagemeyer, Marc. <i>Untersuchung und Entwicklung eines modularen speicherbasierten Schweißstromgenerators mit geringster Stromschwankungsbreite für das Widerstandsschweißen</i>. 2022, doi:<a href=\"https://doi.org/10.17619/UNIPB/1-1582\">10.17619/UNIPB/1-1582</a>.","short":"M. Hagemeyer, Untersuchung und Entwicklung eines modularen speicherbasierten Schweißstromgenerators mit geringster Stromschwankungsbreite für das Widerstandsschweißen, 2022."}},{"status":"public","popular_science":"1","type":"conference","language":[{"iso":"eng"}],"_id":"36838","user_id":"54897","department":[{"_id":"157"}],"year":"2022","citation":{"ama":"Neumann S, Meschut G, Otroshi M, Kneuper F, Schulze A, Tekkaya E. MECHANICALLY JOINED EXTRUSION PROFILES FOR BATTERY TRAYS. In: ; 2022.","chicago":"Neumann, Stefan, Gerson Meschut, Mortaza Otroshi, Florian Kneuper, Andre Schulze, and Erman Tekkaya. “MECHANICALLY JOINED EXTRUSION PROFILES FOR BATTERY TRAYS,” 2022.","ieee":"S. Neumann, G. Meschut, M. Otroshi, F. Kneuper, A. Schulze, and E. Tekkaya, “MECHANICALLY JOINED EXTRUSION PROFILES FOR BATTERY TRAYS,” 2022.","mla":"Neumann, Stefan, et al. <i>MECHANICALLY JOINED EXTRUSION PROFILES FOR BATTERY TRAYS</i>. 2022.","short":"S. Neumann, G. Meschut, M. Otroshi, F. Kneuper, A. Schulze, E. Tekkaya, in: 2022.","bibtex":"@inproceedings{Neumann_Meschut_Otroshi_Kneuper_Schulze_Tekkaya_2022, title={MECHANICALLY JOINED EXTRUSION PROFILES FOR BATTERY TRAYS}, author={Neumann, Stefan and Meschut, Gerson and Otroshi, Mortaza and Kneuper, Florian and Schulze, Andre and Tekkaya, Erman}, year={2022} }","apa":"Neumann, S., Meschut, G., Otroshi, M., Kneuper, F., Schulze, A., &#38; Tekkaya, E. (2022). <i>MECHANICALLY JOINED EXTRUSION PROFILES FOR BATTERY TRAYS</i>."},"publication_status":"published","quality_controlled":"1","title":"MECHANICALLY JOINED EXTRUSION PROFILES FOR BATTERY TRAYS","date_updated":"2023-04-27T13:11:02Z","date_created":"2023-01-14T14:33:45Z","author":[{"first_name":"Stefan","last_name":"Neumann","id":"54897","full_name":"Neumann, Stefan"},{"first_name":"Gerson","orcid":"0000-0002-2763-1246","last_name":"Meschut","full_name":"Meschut, Gerson","id":"32056"},{"id":"71269","full_name":"Otroshi, Mortaza","last_name":"Otroshi","orcid":"0000-0002-8652-9209","first_name":"Mortaza"},{"last_name":"Kneuper","full_name":"Kneuper, Florian","first_name":"Florian"},{"first_name":"Andre","full_name":"Schulze, Andre","last_name":"Schulze"},{"full_name":"Tekkaya, Erman","last_name":"Tekkaya","first_name":"Erman"}]},{"quality_controlled":"1","citation":{"ama":"Schulz AM, Wecker C, Inguva V, Lopatin AS, Kenig EY. A PLIC-based method for species mass transfer at free fluid interfaces. <i>Chemical Engineering Science</i>. 2022;250. doi:<a href=\"https://doi.org/10.1016/j.ces.2021.117357\">10.1016/j.ces.2021.117357</a>","ieee":"A. M. Schulz, C. Wecker, V. Inguva, A. S. Lopatin, and E. Y. Kenig, “A PLIC-based method for species mass transfer at free fluid interfaces,” <i>Chemical Engineering Science</i>, vol. 250, 2022, doi: <a href=\"https://doi.org/10.1016/j.ces.2021.117357\">10.1016/j.ces.2021.117357</a>.","chicago":"Schulz, Andreas Markus, Christian Wecker, Venkatesh Inguva, Alexey S. Lopatin, and Eugeny Y. Kenig. “A PLIC-Based Method for Species Mass Transfer at Free Fluid Interfaces.” <i>Chemical Engineering Science</i> 250 (2022). <a href=\"https://doi.org/10.1016/j.ces.2021.117357\">https://doi.org/10.1016/j.ces.2021.117357</a>.","short":"A.M. Schulz, C. Wecker, V. Inguva, A.S. Lopatin, E.Y. Kenig, Chemical Engineering Science 250 (2022).","mla":"Schulz, Andreas Markus, et al. “A PLIC-Based Method for Species Mass Transfer at Free Fluid Interfaces.” <i>Chemical Engineering Science</i>, vol. 250, Elsevier, 2022, doi:<a href=\"https://doi.org/10.1016/j.ces.2021.117357\">10.1016/j.ces.2021.117357</a>.","bibtex":"@article{Schulz_Wecker_Inguva_Lopatin_Kenig_2022, title={A PLIC-based method for species mass transfer at free fluid interfaces}, volume={250}, DOI={<a href=\"https://doi.org/10.1016/j.ces.2021.117357\">10.1016/j.ces.2021.117357</a>}, journal={Chemical Engineering Science}, publisher={Elsevier}, author={Schulz, Andreas Markus and Wecker, Christian and Inguva, Venkatesh and Lopatin, Alexey S. and Kenig, Eugeny Y.}, year={2022} }","apa":"Schulz, A. M., Wecker, C., Inguva, V., Lopatin, A. S., &#38; Kenig, E. Y. (2022). A PLIC-based method for species mass transfer at free fluid interfaces. <i>Chemical Engineering Science</i>, <i>250</i>. <a href=\"https://doi.org/10.1016/j.ces.2021.117357\">https://doi.org/10.1016/j.ces.2021.117357</a>"},"intvolume":"       250","year":"2022","date_created":"2021-11-11T12:56:23Z","author":[{"last_name":"Schulz","full_name":"Schulz, Andreas Markus","id":"63109","first_name":"Andreas Markus"},{"first_name":"Christian","id":"29891","full_name":"Wecker, Christian","last_name":"Wecker"},{"last_name":"Inguva","full_name":"Inguva, Venkatesh","id":"75069","first_name":"Venkatesh"},{"first_name":"Alexey S.","full_name":"Lopatin, Alexey S.","last_name":"Lopatin"},{"last_name":"Kenig","full_name":"Kenig, Eugeny Y.","id":"665","first_name":"Eugeny Y."}],"volume":250,"publisher":"Elsevier","date_updated":"2023-04-27T15:40:57Z","doi":"10.1016/j.ces.2021.117357","conference":{"location":"Muster location","end_date":"2021-06-16","start_date":"2021-06-15","name":"Muster Conference"},"title":"A PLIC-based method for species mass transfer at free fluid interfaces","type":"journal_article","publication":"Chemical Engineering Science","status":"public","user_id":"90390","department":[{"_id":"145"}],"project":[{"name":"PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing","_id":"52"}],"_id":"27375","language":[{"iso":"eng"}]},{"title":"Droplet formation –a numerical investigation of liquid-liquid systems with consideration of Marangoni convection","doi":"10.1016/j.ijheatmasstransfer.2021.122465","publisher":"ELSEVIER","date_updated":"2023-04-27T15:28:14Z","date_created":"2021-12-15T11:14:48Z","author":[{"first_name":"Christian","last_name":"Wecker","id":"29891","full_name":"Wecker, Christian"},{"first_name":"Andreas Markus","last_name":"Schulz","id":"63109","full_name":"Schulz, Andreas Markus"},{"first_name":"Jens","last_name":"Heine","full_name":"Heine, Jens"},{"first_name":"Hans Jörg","last_name":"Bart","full_name":"Bart, Hans Jörg"},{"last_name":"Kenig","full_name":"Kenig, Eugeny Y.","id":"665","first_name":"Eugeny Y."}],"volume":188,"year":"2022","citation":{"bibtex":"@article{Wecker_Schulz_Heine_Bart_Kenig_2022, title={Droplet formation –a numerical investigation of liquid-liquid systems with consideration of Marangoni convection}, volume={188}, DOI={<a href=\"https://doi.org/10.1016/j.ijheatmasstransfer.2021.122465\">10.1016/j.ijheatmasstransfer.2021.122465</a>}, journal={International Journal of Heat and Mass Transfer}, publisher={ELSEVIER}, author={Wecker, Christian and Schulz, Andreas Markus and Heine, Jens and Bart, Hans Jörg and Kenig, Eugeny Y.}, year={2022} }","short":"C. Wecker, A.M. Schulz, J. Heine, H.J. Bart, E.Y. Kenig, International Journal of Heat and Mass Transfer 188 (2022).","mla":"Wecker, Christian, et al. “Droplet Formation –a Numerical Investigation of Liquid-Liquid Systems with Consideration of Marangoni Convection.” <i>International Journal of Heat and Mass Transfer</i>, vol. 188, ELSEVIER, 2022, doi:<a href=\"https://doi.org/10.1016/j.ijheatmasstransfer.2021.122465\">10.1016/j.ijheatmasstransfer.2021.122465</a>.","apa":"Wecker, C., Schulz, A. M., Heine, J., Bart, H. J., &#38; Kenig, E. Y. (2022). Droplet formation –a numerical investigation of liquid-liquid systems with consideration of Marangoni convection. <i>International Journal of Heat and Mass Transfer</i>, <i>188</i>. <a href=\"https://doi.org/10.1016/j.ijheatmasstransfer.2021.122465\">https://doi.org/10.1016/j.ijheatmasstransfer.2021.122465</a>","ieee":"C. Wecker, A. M. Schulz, J. Heine, H. J. Bart, and E. Y. Kenig, “Droplet formation –a numerical investigation of liquid-liquid systems with consideration of Marangoni convection,” <i>International Journal of Heat and Mass Transfer</i>, vol. 188, 2022, doi: <a href=\"https://doi.org/10.1016/j.ijheatmasstransfer.2021.122465\">10.1016/j.ijheatmasstransfer.2021.122465</a>.","chicago":"Wecker, Christian, Andreas Markus Schulz, Jens Heine, Hans Jörg Bart, and Eugeny Y. Kenig. “Droplet Formation –a Numerical Investigation of Liquid-Liquid Systems with Consideration of Marangoni Convection.” <i>International Journal of Heat and Mass Transfer</i> 188 (2022). <a href=\"https://doi.org/10.1016/j.ijheatmasstransfer.2021.122465\">https://doi.org/10.1016/j.ijheatmasstransfer.2021.122465</a>.","ama":"Wecker C, Schulz AM, Heine J, Bart HJ, Kenig EY. Droplet formation –a numerical investigation of liquid-liquid systems with consideration of Marangoni convection. <i>International Journal of Heat and Mass Transfer</i>. 2022;188. doi:<a href=\"https://doi.org/10.1016/j.ijheatmasstransfer.2021.122465\">10.1016/j.ijheatmasstransfer.2021.122465</a>"},"intvolume":"       188","publication_status":"published","quality_controlled":"1","language":[{"iso":"eng"}],"project":[{"name":"Computing Resources Provided by the Paderborn Center for Parallel Computing","_id":"52"}],"_id":"28942","user_id":"90390","department":[{"_id":"145"}],"status":"public","type":"journal_article","publication":"International Journal of Heat and Mass Transfer"},{"language":[{"iso":"eng"}],"keyword":["Industrial and Manufacturing Engineering","General Chemical Engineering","General Chemistry"],"publication":"Chemie Ingenieur Technik","title":"Experimentelle Untersuchung der Tropfenkondensation am chemisch modifizierten Edelstahl‐Drallrohr","date_created":"2023-04-27T16:24:30Z","publisher":"Wiley","year":"2022","issue":"6","quality_controlled":"1","user_id":"90390","department":[{"_id":"145"}],"_id":"44239","status":"public","type":"journal_article","doi":"10.1002/cite.202100176","author":[{"full_name":"Dai, Daokun","last_name":"Dai","first_name":"Daokun"},{"last_name":"Kenig","full_name":"Kenig, Eugeny Y.","id":"665","first_name":"Eugeny Y."},{"full_name":"Numrich, Reiner","last_name":"Numrich","first_name":"Reiner"}],"volume":94,"date_updated":"2023-04-27T16:27:01Z","citation":{"ama":"Dai D, Kenig EY, Numrich R. Experimentelle Untersuchung der Tropfenkondensation am chemisch modifizierten Edelstahl‐Drallrohr. <i>Chemie Ingenieur Technik</i>. 2022;94(6):905-911. doi:<a href=\"https://doi.org/10.1002/cite.202100176\">10.1002/cite.202100176</a>","chicago":"Dai, Daokun, Eugeny Y. Kenig, and Reiner Numrich. “Experimentelle Untersuchung Der Tropfenkondensation Am Chemisch Modifizierten Edelstahl‐Drallrohr.” <i>Chemie Ingenieur Technik</i> 94, no. 6 (2022): 905–11. <a href=\"https://doi.org/10.1002/cite.202100176\">https://doi.org/10.1002/cite.202100176</a>.","ieee":"D. Dai, E. Y. Kenig, and R. Numrich, “Experimentelle Untersuchung der Tropfenkondensation am chemisch modifizierten Edelstahl‐Drallrohr,” <i>Chemie Ingenieur Technik</i>, vol. 94, no. 6, pp. 905–911, 2022, doi: <a href=\"https://doi.org/10.1002/cite.202100176\">10.1002/cite.202100176</a>.","bibtex":"@article{Dai_Kenig_Numrich_2022, title={Experimentelle Untersuchung der Tropfenkondensation am chemisch modifizierten Edelstahl‐Drallrohr}, volume={94}, DOI={<a href=\"https://doi.org/10.1002/cite.202100176\">10.1002/cite.202100176</a>}, number={6}, journal={Chemie Ingenieur Technik}, publisher={Wiley}, author={Dai, Daokun and Kenig, Eugeny Y. and Numrich, Reiner}, year={2022}, pages={905–911} }","short":"D. Dai, E.Y. Kenig, R. Numrich, Chemie Ingenieur Technik 94 (2022) 905–911.","mla":"Dai, Daokun, et al. “Experimentelle Untersuchung Der Tropfenkondensation Am Chemisch Modifizierten Edelstahl‐Drallrohr.” <i>Chemie Ingenieur Technik</i>, vol. 94, no. 6, Wiley, 2022, pp. 905–11, doi:<a href=\"https://doi.org/10.1002/cite.202100176\">10.1002/cite.202100176</a>.","apa":"Dai, D., Kenig, E. Y., &#38; Numrich, R. (2022). Experimentelle Untersuchung der Tropfenkondensation am chemisch modifizierten Edelstahl‐Drallrohr. <i>Chemie Ingenieur Technik</i>, <i>94</i>(6), 905–911. <a href=\"https://doi.org/10.1002/cite.202100176\">https://doi.org/10.1002/cite.202100176</a>"},"intvolume":"        94","page":"905-911","publication_status":"published","publication_identifier":{"issn":["0009-286X","1522-2640"]}},{"publication":"Journal of Computational Physics","type":"journal_article","status":"public","department":[{"_id":"145"}],"user_id":"90390","_id":"44235","project":[{"name":"PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing","_id":"52"}],"language":[{"iso":"eng"}],"article_number":"1110066","quality_controlled":"1","publication_status":"published","intvolume":"       456","citation":{"ama":"Inguva V, Kenig EY, Perot JB. A front-tracking method for two-phase flow simulation with no spurious currents. <i>Journal of Computational Physics</i>. 2022;456.","chicago":"Inguva, Venkatesh, Eugeny Y. Kenig, and J. Blair Perot. “A Front-Tracking Method for Two-Phase Flow Simulation with No Spurious Currents.” <i>Journal of Computational Physics</i> 456 (2022).","ieee":"V. Inguva, E. Y. Kenig, and J. B. Perot, “A front-tracking method for two-phase flow simulation with no spurious currents,” <i>Journal of Computational Physics</i>, vol. 456, Art. no. 1110066, 2022.","apa":"Inguva, V., Kenig, E. Y., &#38; Perot, J. B. (2022). A front-tracking method for two-phase flow simulation with no spurious currents. <i>Journal of Computational Physics</i>, <i>456</i>, Article 1110066.","mla":"Inguva, Venkatesh, et al. “A Front-Tracking Method for Two-Phase Flow Simulation with No Spurious Currents.” <i>Journal of Computational Physics</i>, vol. 456, 1110066, Elsevier, 2022.","bibtex":"@article{Inguva_Kenig_Perot_2022, title={A front-tracking method for two-phase flow simulation with no spurious currents}, volume={456}, number={1110066}, journal={Journal of Computational Physics}, publisher={Elsevier}, author={Inguva, Venkatesh and Kenig, Eugeny Y. and Perot, J. Blair}, year={2022} }","short":"V. Inguva, E.Y. Kenig, J.B. Perot, Journal of Computational Physics 456 (2022)."},"year":"2022","volume":456,"author":[{"first_name":"Venkatesh","full_name":"Inguva, Venkatesh","id":"75069","last_name":"Inguva"},{"first_name":"Eugeny Y.","full_name":"Kenig, Eugeny Y.","id":"665","last_name":"Kenig"},{"first_name":"J. Blair","last_name":"Perot","full_name":"Perot, J. Blair"}],"date_created":"2023-04-27T15:58:12Z","publisher":"Elsevier","date_updated":"2023-04-27T16:09:55Z","title":"A front-tracking method for two-phase flow simulation with no spurious currents"},{"_id":"36339","user_id":"43720","department":[{"_id":"158"},{"_id":"321"}],"status":"public","type":"conference","main_file_link":[{"open_access":"1","url":"https://www.confer.cz/metal/2022/4437-phase-identification-in-twin-roll-cast-al-li-alloys"}],"conference":{"end_date":"2022-05-19","location":"Brno","name":"Metal 2022","start_date":"2022-05-18"},"doi":"10.37904/metal.2022.4437","date_updated":"2023-04-27T16:35:42Z","oa":"1","author":[{"last_name":"BAJTOŠOVÁ","full_name":"BAJTOŠOVÁ, Lucia","first_name":"Lucia"},{"first_name":"Olexandr","last_name":"Grydin","id":"43822","full_name":"Grydin, Olexandr"},{"full_name":"STOLBCHENKO, Mykhailo","last_name":"STOLBCHENKO","first_name":"Mykhailo"},{"first_name":"Mirko","last_name":"Schaper","id":"43720","full_name":"Schaper, Mirko"},{"first_name":"Barbora","last_name":"KŘIVSKÁ","full_name":"KŘIVSKÁ, Barbora"},{"last_name":"KRÁLÍK","full_name":"KRÁLÍK, Rostislav","first_name":"Rostislav"},{"full_name":"ŠLAPÁKOVÁ, Michaela","last_name":"ŠLAPÁKOVÁ","first_name":"Michaela"},{"first_name":"Miroslav","full_name":"CIESLAR, Miroslav","last_name":"CIESLAR"}],"citation":{"bibtex":"@inproceedings{BAJTOŠOVÁ_Grydin_STOLBCHENKO_Schaper_KŘIVSKÁ_KRÁLÍK_ŠLAPÁKOVÁ_CIESLAR_2022, title={Phase identification in twin-roll cast Al-Li alloys}, DOI={<a href=\"https://doi.org/10.37904/metal.2022.4437\">10.37904/metal.2022.4437</a>}, booktitle={METAL 2022 Conference Proeedings}, publisher={TANGER Ltd.}, author={BAJTOŠOVÁ, Lucia and Grydin, Olexandr and STOLBCHENKO, Mykhailo and Schaper, Mirko and KŘIVSKÁ, Barbora and KRÁLÍK, Rostislav and ŠLAPÁKOVÁ, Michaela and CIESLAR, Miroslav}, year={2022} }","mla":"BAJTOŠOVÁ, Lucia, et al. “Phase Identification in Twin-Roll Cast Al-Li Alloys.” <i>METAL 2022 Conference Proeedings</i>, TANGER Ltd., 2022, doi:<a href=\"https://doi.org/10.37904/metal.2022.4437\">10.37904/metal.2022.4437</a>.","short":"L. BAJTOŠOVÁ, O. Grydin, M. STOLBCHENKO, M. Schaper, B. KŘIVSKÁ, R. KRÁLÍK, M. ŠLAPÁKOVÁ, M. CIESLAR, in: METAL 2022 Conference Proeedings, TANGER Ltd., 2022.","apa":"BAJTOŠOVÁ, L., Grydin, O., STOLBCHENKO, M., Schaper, M., KŘIVSKÁ, B., KRÁLÍK, R., ŠLAPÁKOVÁ, M., &#38; CIESLAR, M. (2022). Phase identification in twin-roll cast Al-Li alloys. <i>METAL 2022 Conference Proeedings</i>. Metal 2022, Brno. <a href=\"https://doi.org/10.37904/metal.2022.4437\">https://doi.org/10.37904/metal.2022.4437</a>","chicago":"BAJTOŠOVÁ, Lucia, Olexandr Grydin, Mykhailo STOLBCHENKO, Mirko Schaper, Barbora KŘIVSKÁ, Rostislav KRÁLÍK, Michaela ŠLAPÁKOVÁ, and Miroslav CIESLAR. “Phase Identification in Twin-Roll Cast Al-Li Alloys.” In <i>METAL 2022 Conference Proeedings</i>. TANGER Ltd., 2022. <a href=\"https://doi.org/10.37904/metal.2022.4437\">https://doi.org/10.37904/metal.2022.4437</a>.","ieee":"L. BAJTOŠOVÁ <i>et al.</i>, “Phase identification in twin-roll cast Al-Li alloys,” presented at the Metal 2022, Brno, 2022, doi: <a href=\"https://doi.org/10.37904/metal.2022.4437\">10.37904/metal.2022.4437</a>.","ama":"BAJTOŠOVÁ L, Grydin O, STOLBCHENKO M, et al. Phase identification in twin-roll cast Al-Li alloys. In: <i>METAL 2022 Conference Proeedings</i>. TANGER Ltd.; 2022. doi:<a href=\"https://doi.org/10.37904/metal.2022.4437\">10.37904/metal.2022.4437</a>"},"publication_status":"published","publication_identifier":{"issn":["2694-9296"]},"keyword":["Al-Cu-Li-M-Zr-Fe alloy","twin-roll casting","phase identification","ACOM-TEM"],"language":[{"iso":"eng"}],"abstract":[{"lang":"eng","text":"Al-Li-based alloys are an attractive material for aircraft and aerospace applications. Preparation of these alloys by twin-roll casting (TRC), which combines rapid metal solidification and subsequent plastic reduction in a single processing step, could improve the properties of the alloys compared to materials prepared by conventional direct-chill casting. A commonly used approach for identifying primary phases is a chemical analysis by energy dispersive spectroscopy (EDS). More accurate results can be achieved by combining the method with diffraction analysis. This process can be considerably simplified in microscopes equipped with automated crystal orientation and phase mapping (ACOM-TEM). Al-Cu-Li-Mg-Zr alloy was prepared by twin-roll casting. A combination of TEM and STEM images with chemical analysis by EDS and ACOM-TEM was used to obtain complex information about phases of boundary primary particles. The efficiency of the individual methods for the phase identification in TRC Al-Li-based alloys is discussed."}],"publication":"METAL 2022 Conference Proeedings","title":"Phase identification in twin-roll cast Al-Li alloys","publisher":"TANGER Ltd.","date_created":"2023-01-12T09:42:02Z","year":"2022","quality_controlled":"1"},{"volume":15,"date_created":"2022-06-27T14:50:27Z","author":[{"full_name":"Abdelaal, Osama","last_name":"Abdelaal","first_name":"Osama"},{"full_name":"Hengsbach, Florian","last_name":"Hengsbach","first_name":"Florian"},{"first_name":"Mirko","last_name":"Schaper","full_name":"Schaper, Mirko","id":"43720"},{"first_name":"Kay-Peter","id":"48411","full_name":"Hoyer, Kay-Peter","last_name":"Hoyer"}],"date_updated":"2023-04-27T16:34:46Z","publisher":"MDPI AG","doi":"10.3390/ma15124072","title":"LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio","issue":"12","quality_controlled":"1","publication_identifier":{"issn":["1996-1944"]},"publication_status":"published","intvolume":"        15","citation":{"apa":"Abdelaal, O., Hengsbach, F., Schaper, M., &#38; Hoyer, K.-P. (2022). LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio. <i>Materials</i>, <i>15</i>(12), Article 4072. <a href=\"https://doi.org/10.3390/ma15124072\">https://doi.org/10.3390/ma15124072</a>","short":"O. Abdelaal, F. Hengsbach, M. Schaper, K.-P. Hoyer, Materials 15 (2022).","bibtex":"@article{Abdelaal_Hengsbach_Schaper_Hoyer_2022, title={LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio}, volume={15}, DOI={<a href=\"https://doi.org/10.3390/ma15124072\">10.3390/ma15124072</a>}, number={124072}, journal={Materials}, publisher={MDPI AG}, author={Abdelaal, Osama and Hengsbach, Florian and Schaper, Mirko and Hoyer, Kay-Peter}, year={2022} }","mla":"Abdelaal, Osama, et al. “LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio.” <i>Materials</i>, vol. 15, no. 12, 4072, MDPI AG, 2022, doi:<a href=\"https://doi.org/10.3390/ma15124072\">10.3390/ma15124072</a>.","chicago":"Abdelaal, Osama, Florian Hengsbach, Mirko Schaper, and Kay-Peter Hoyer. “LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio.” <i>Materials</i> 15, no. 12 (2022). <a href=\"https://doi.org/10.3390/ma15124072\">https://doi.org/10.3390/ma15124072</a>.","ieee":"O. Abdelaal, F. Hengsbach, M. Schaper, and K.-P. Hoyer, “LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio,” <i>Materials</i>, vol. 15, no. 12, Art. no. 4072, 2022, doi: <a href=\"https://doi.org/10.3390/ma15124072\">10.3390/ma15124072</a>.","ama":"Abdelaal O, Hengsbach F, Schaper M, Hoyer K-P. LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio. <i>Materials</i>. 2022;15(12). doi:<a href=\"https://doi.org/10.3390/ma15124072\">10.3390/ma15124072</a>"},"year":"2022","department":[{"_id":"9"},{"_id":"158"}],"user_id":"43720","_id":"32188","language":[{"iso":"eng"}],"keyword":["General Materials Science"],"article_number":"4072","publication":"Materials","type":"journal_article","status":"public","abstract":[{"text":"<jats:p>The additive manufacturing (AM) of innovative lattice structures with unique mechanical properties has received widespread attention due to the capability of AM processes to fabricate freeform and intricate structures. The most common way to characterize the additively manufactured lattice structures is via the uniaxial compression test. However, although there are many applications for which lattice structures are designed for bending (e.g., sandwich panels cores and some medical implants), limited attention has been paid toward investigating the flexural behavior of metallic AM lattice structures with tunable internal architectures. The purpose of this study was to experimentally investigate the flexural behavior of AM Ti-6Al-4V lattice structures with graded density and hybrid Poisson’s ratio (PR). Four configurations of lattice structure beams with positive, negative, hybrid PR, and a novel hybrid PR with graded density were manufactured via the laser powder bed fusion (LPBF) AM process and tested under four-point bending. The manufacturability, microstructure, micro-hardness, and flexural properties of the lattices were evaluated. During the bending tests, different failure mechanisms were observed, which were highly dependent on the type of lattice geometry. The best response in terms of absorbed energy was obtained for the functionally graded hybrid PR (FGHPR) structure. Both the FGHPR and hybrid PR (HPR) structured showed a 78.7% and 62.9% increase in the absorbed energy, respectively, compared to the positive PR (PPR) structure. This highlights the great potential for FGHPR lattices to be used in protective devices, load-bearing medical implants, and energy-absorbing applications.</jats:p>","lang":"eng"}]},{"status":"public","type":"journal_article","publication":"Advanced Composite Materials","keyword":["Mechanical Engineering","Mechanics of Materials","Ceramics and Composites"],"language":[{"iso":"eng"}],"_id":"34097","user_id":"43720","department":[{"_id":"9"},{"_id":"149"},{"_id":"321"},{"_id":"158"}],"year":"2022","citation":{"apa":"Voswinkel, D., Striewe, J. A., Grydin, O., Meinderink, D., Grundmeier, G., Schaper, M., &#38; Tröster, T. (2022). Co-bonding of carbon fibre-reinforced epoxy and galvanised steel with laser structured interface for automotive applications. <i>Advanced Composite Materials</i>, 1–16. <a href=\"https://doi.org/10.1080/09243046.2022.2143746\">https://doi.org/10.1080/09243046.2022.2143746</a>","mla":"Voswinkel, Dietrich, et al. “Co-Bonding of Carbon Fibre-Reinforced Epoxy and Galvanised Steel with Laser Structured Interface for Automotive Applications.” <i>Advanced Composite Materials</i>, Informa UK Limited, 2022, pp. 1–16, doi:<a href=\"https://doi.org/10.1080/09243046.2022.2143746\">10.1080/09243046.2022.2143746</a>.","bibtex":"@article{Voswinkel_Striewe_Grydin_Meinderink_Grundmeier_Schaper_Tröster_2022, title={Co-bonding of carbon fibre-reinforced epoxy and galvanised steel with laser structured interface for automotive applications}, DOI={<a href=\"https://doi.org/10.1080/09243046.2022.2143746\">10.1080/09243046.2022.2143746</a>}, journal={Advanced Composite Materials}, publisher={Informa UK Limited}, author={Voswinkel, Dietrich and Striewe, Jan Andre and Grydin, Olexandr and Meinderink, Dennis and Grundmeier, Guido and Schaper, Mirko and Tröster, Thomas}, year={2022}, pages={1–16} }","short":"D. Voswinkel, J.A. Striewe, O. Grydin, D. Meinderink, G. Grundmeier, M. Schaper, T. Tröster, Advanced Composite Materials (2022) 1–16.","ama":"Voswinkel D, Striewe JA, Grydin O, et al. Co-bonding of carbon fibre-reinforced epoxy and galvanised steel with laser structured interface for automotive applications. <i>Advanced Composite Materials</i>. Published online 2022:1-16. doi:<a href=\"https://doi.org/10.1080/09243046.2022.2143746\">10.1080/09243046.2022.2143746</a>","chicago":"Voswinkel, Dietrich, Jan Andre Striewe, Olexandr Grydin, Dennis Meinderink, Guido Grundmeier, Mirko Schaper, and Thomas Tröster. “Co-Bonding of Carbon Fibre-Reinforced Epoxy and Galvanised Steel with Laser Structured Interface for Automotive Applications.” <i>Advanced Composite Materials</i>, 2022, 1–16. <a href=\"https://doi.org/10.1080/09243046.2022.2143746\">https://doi.org/10.1080/09243046.2022.2143746</a>.","ieee":"D. Voswinkel <i>et al.</i>, “Co-bonding of carbon fibre-reinforced epoxy and galvanised steel with laser structured interface for automotive applications,” <i>Advanced Composite Materials</i>, pp. 1–16, 2022, doi: <a href=\"https://doi.org/10.1080/09243046.2022.2143746\">10.1080/09243046.2022.2143746</a>."},"page":"1-16","publication_status":"published","publication_identifier":{"issn":["0924-3046","1568-5519"]},"quality_controlled":"1","title":"Co-bonding of carbon fibre-reinforced epoxy and galvanised steel with laser structured interface for automotive applications","doi":"10.1080/09243046.2022.2143746","publisher":"Informa UK Limited","date_updated":"2023-04-27T16:36:14Z","author":[{"id":"52634","full_name":"Voswinkel, Dietrich","last_name":"Voswinkel","first_name":"Dietrich"},{"first_name":"Jan Andre","full_name":"Striewe, Jan Andre","id":"29413","last_name":"Striewe"},{"first_name":"Olexandr","full_name":"Grydin, Olexandr","id":"43822","last_name":"Grydin"},{"full_name":"Meinderink, Dennis","id":"32378","last_name":"Meinderink","orcid":"0000-0002-2755-6514","first_name":"Dennis"},{"first_name":"Guido","last_name":"Grundmeier","full_name":"Grundmeier, Guido","id":"194"},{"first_name":"Mirko","last_name":"Schaper","id":"43720","full_name":"Schaper, Mirko"},{"last_name":"Tröster","full_name":"Tröster, Thomas","id":"553","first_name":"Thomas"}],"date_created":"2022-11-17T08:05:26Z"}]