--- _id: '24573' abstract: - lang: eng text: Al-Li based alloys are attractive materials for the aerospace industry. The twin-roll casting of such materials could provide properties not achievable by conventional direct-chill casting and downstream processing methods due to significantly higher solidification rates. An Al-Li-Cu-Mg-Zr alloy was twin-roll cast with the same alloy containing a small addition of Sc. The microstructure of as-cast materials and the influence of Sc on the behavior of the alloy at elevated temperatures were studied by means of light and electron microscopy and by resistivity measurements. A fine-grained structure was formed during twin-roll casting, but several surface and internal defects were found on the strips, which should be suppressed by a further adjustment of the casting conditions. The addition of Sc had a positive effect on grain size uniformity and microstructure stabilization at elevated temperatures, as shown by the precipitation of a fine dispersion of coherent Sc- and Zr-containing precipitates. article_number: '987' article_type: original author: - first_name: Olexandr full_name: Grydin, Olexandr id: '43822' last_name: Grydin - first_name: Mykhailo full_name: Stolbchenko, Mykhailo last_name: Stolbchenko - first_name: Mirko full_name: Schaper, Mirko id: '43720' last_name: Schaper - first_name: Sára full_name: Belejová, Sára last_name: Belejová - first_name: Rostislav full_name: Králík, Rostislav last_name: Králík - first_name: Lucia full_name: Bajtošová, Lucia last_name: Bajtošová - first_name: Barbora full_name: Křivská, Barbora last_name: Křivská - first_name: Michal full_name: Hájek, Michal last_name: Hájek - first_name: Miroslav full_name: Cieslar, Miroslav last_name: Cieslar citation: ama: Grydin O, Stolbchenko M, Schaper M, et al. New Twin-Roll Cast Al-Li Based Alloys for High-Strength Applications. Metals. 2020;10(8). doi:10.3390/met10080987 apa: Grydin, O., Stolbchenko, M., Schaper, M., Belejová, S., Králík, R., Bajtošová, L., Křivská, B., Hájek, M., & Cieslar, M. (2020). New Twin-Roll Cast Al-Li Based Alloys for High-Strength Applications. Metals, 10(8), Article 987. https://doi.org/10.3390/met10080987 bibtex: '@article{Grydin_Stolbchenko_Schaper_Belejová_Králík_Bajtošová_Křivská_Hájek_Cieslar_2020, title={New Twin-Roll Cast Al-Li Based Alloys for High-Strength Applications}, volume={10}, DOI={10.3390/met10080987}, number={8987}, journal={Metals}, author={Grydin, Olexandr and Stolbchenko, Mykhailo and Schaper, Mirko and Belejová, Sára and Králík, Rostislav and Bajtošová, Lucia and Křivská, Barbora and Hájek, Michal and Cieslar, Miroslav}, year={2020} }' chicago: Grydin, Olexandr, Mykhailo Stolbchenko, Mirko Schaper, Sára Belejová, Rostislav Králík, Lucia Bajtošová, Barbora Křivská, Michal Hájek, and Miroslav Cieslar. “New Twin-Roll Cast Al-Li Based Alloys for High-Strength Applications.” Metals 10, no. 8 (2020). https://doi.org/10.3390/met10080987. ieee: 'O. Grydin et al., “New Twin-Roll Cast Al-Li Based Alloys for High-Strength Applications,” Metals, vol. 10, no. 8, Art. no. 987, 2020, doi: 10.3390/met10080987.' mla: Grydin, Olexandr, et al. “New Twin-Roll Cast Al-Li Based Alloys for High-Strength Applications.” Metals, vol. 10, no. 8, 987, 2020, doi:10.3390/met10080987. short: O. Grydin, M. Stolbchenko, M. Schaper, S. Belejová, R. Králík, L. Bajtošová, B. Křivská, M. Hájek, M. Cieslar, Metals 10 (2020). date_created: 2021-09-16T16:24:50Z date_updated: 2023-06-01T14:30:52Z department: - _id: '158' doi: 10.3390/met10080987 intvolume: ' 10' issue: '8' language: - iso: eng main_file_link: - open_access: '1' url: https://www.mdpi.com/2075-4701/10/8/987/htm oa: '1' publication: Metals publication_identifier: issn: - 2075-4701 publication_status: published quality_controlled: '1' status: public title: New Twin-Roll Cast Al-Li Based Alloys for High-Strength Applications type: journal_article user_id: '43720' volume: 10 year: '2020' ... --- _id: '24100' abstract: - lang: eng text: Zinc oxide (ZnO) hollow spheres with defined morphology and micro-/nanostructure are prepared by a hydrothermal synthesis approach. The materials possess fine-leaved structures at their particle surface (nanowall hollow micro spheres). Morphology control is achieved by citric acid used as an additive in variable relative quantities during the synthesis. The structure formation is studied by various time-dependent ex situ methods, such as scanning electron microscopy, x-ray diffraction, and Raman spectroscopy. The fine-leaved surface structure is characterized by high-resolution transmission electron microscopy techniques (HRTEM, STEM), using a high-angle annular dark field detector, as well as by differential phase contrast analysis. In-depth structural characterization of the nanowalls by drop-by-drop ex situ FE-SEM analysis provides insight into possible structure formation mechanisms. Further investigation addresses the thermal stability of the particle morphology and the enhancement of the surface-to-volume ratio by heat treatment (examined by N2 physisorption). article_type: original author: - first_name: Katja full_name: Engelkemeier, Katja id: '21743' last_name: Engelkemeier - first_name: Jörg full_name: Lindner, Jörg id: '20797' last_name: Lindner - first_name: Julius full_name: Bürger, Julius id: '46952' last_name: Bürger - first_name: Kathrin full_name: Vaupel, Kathrin last_name: Vaupel - first_name: Marc full_name: Hartmann, Marc last_name: Hartmann - first_name: Michael full_name: Tiemann, Michael id: '23547' last_name: Tiemann orcid: 0000-0003-1711-2722 - first_name: Kay-Peter full_name: Hoyer, Kay-Peter id: '48411' last_name: Hoyer - first_name: Mirko full_name: Schaper, Mirko id: '43720' last_name: Schaper citation: ama: Engelkemeier K, Lindner J, Bürger J, et al. Nano-architectural complexity of zinc oxide nanowall hollow microspheres and their structural properties. Nanotechnology. 2020;31:095701. doi:10.1088/1361-6528/ab55bc apa: Engelkemeier, K., Lindner, J., Bürger, J., Vaupel, K., Hartmann, M., Tiemann, M., Hoyer, K.-P., & Schaper, M. (2020). Nano-architectural complexity of zinc oxide nanowall hollow microspheres and their structural properties. Nanotechnology, 31, 095701. https://doi.org/10.1088/1361-6528/ab55bc bibtex: '@article{Engelkemeier_Lindner_Bürger_Vaupel_Hartmann_Tiemann_Hoyer_Schaper_2020, title={Nano-architectural complexity of zinc oxide nanowall hollow microspheres and their structural properties}, volume={31}, DOI={10.1088/1361-6528/ab55bc}, journal={Nanotechnology}, author={Engelkemeier, Katja and Lindner, Jörg and Bürger, Julius and Vaupel, Kathrin and Hartmann, Marc and Tiemann, Michael and Hoyer, Kay-Peter and Schaper, Mirko}, year={2020}, pages={095701} }' chicago: 'Engelkemeier, Katja, Jörg Lindner, Julius Bürger, Kathrin Vaupel, Marc Hartmann, Michael Tiemann, Kay-Peter Hoyer, and Mirko Schaper. “Nano-Architectural Complexity of Zinc Oxide Nanowall Hollow Microspheres and Their Structural Properties.” Nanotechnology 31 (2020): 095701. https://doi.org/10.1088/1361-6528/ab55bc.' ieee: 'K. Engelkemeier et al., “Nano-architectural complexity of zinc oxide nanowall hollow microspheres and their structural properties,” Nanotechnology, vol. 31, p. 095701, 2020, doi: 10.1088/1361-6528/ab55bc.' mla: Engelkemeier, Katja, et al. “Nano-Architectural Complexity of Zinc Oxide Nanowall Hollow Microspheres and Their Structural Properties.” Nanotechnology, vol. 31, 2020, p. 095701, doi:10.1088/1361-6528/ab55bc. short: K. Engelkemeier, J. Lindner, J. Bürger, K. Vaupel, M. Hartmann, M. Tiemann, K.-P. Hoyer, M. Schaper, Nanotechnology 31 (2020) 095701. date_created: 2021-09-10T06:49:55Z date_updated: 2023-06-01T14:29:58Z department: - _id: '9' - _id: '158' - _id: '301' - _id: '286' - _id: '35' - _id: '307' - _id: '2' doi: 10.1088/1361-6528/ab55bc intvolume: ' 31' language: - iso: eng page: '095701' publication: Nanotechnology publication_identifier: issn: - 0957-4484 - 1361-6528 publication_status: published quality_controlled: '1' status: public title: Nano-architectural complexity of zinc oxide nanowall hollow microspheres and their structural properties type: journal_article user_id: '43720' volume: 31 year: '2020' ... --- _id: '24572' abstract: - lang: eng text: ' This experiment studied the strain parameters of rolling an aluminum matrix when wire netting is inserted between aluminum layers. During the experiment, two types of stainless steel fabric netting oriented parallel and diagonal to the rolling axis were placed between two aluminum strips and rolled. Multiple rolling processes were performed in which the temperature and pressure on the material were varied to produce bonding of matrix layers. During the study, the following main investigations were made: strain on areas of longitudinal and transverse cross sections of the composite was measured; stretching and ovalization of net wiring and changes in the net cell angles were determined; mechanical properties of composites along the rolling direction were tested. The main contradiction resulting from this experiment was as follows: the contact pressure required for the bonding of aluminum layers produces extreme tensile strain on the inserted net wires, reducing the mechanical properties of the reinforcing net and thus reducing properties of the entire composite. Optimal results in the longitudinal tension tests were achieved by using strips with diagonally oriented net-reinforcement. ' author: - first_name: Mykhailo full_name: Stolbchenko, Mykhailo last_name: Stolbchenko - first_name: Hanna full_name: Makeieva, Hanna last_name: Makeieva - first_name: Olexandr full_name: Grydin, Olexandr id: '43822' last_name: Grydin - first_name: Yaroslav full_name: Frolov, Yaroslav last_name: Frolov - first_name: Mirko full_name: Schaper, Mirko id: '43720' last_name: Schaper citation: ama: Stolbchenko M, Makeieva H, Grydin O, Frolov Y, Schaper M. Strain parameters at hot rolling of aluminum strips reinforced with steel netting. Journal of Sandwich Structures & Materials. 2020;22(6):2009-2029. doi:10.1177/1099636218792539 apa: Stolbchenko, M., Makeieva, H., Grydin, O., Frolov, Y., & Schaper, M. (2020). Strain parameters at hot rolling of aluminum strips reinforced with steel netting. Journal of Sandwich Structures & Materials, 22(6), 2009–2029. https://doi.org/10.1177/1099636218792539 bibtex: '@article{Stolbchenko_Makeieva_Grydin_Frolov_Schaper_2020, title={Strain parameters at hot rolling of aluminum strips reinforced with steel netting}, volume={22}, DOI={10.1177/1099636218792539}, number={6}, journal={Journal of Sandwich Structures & Materials}, author={Stolbchenko, Mykhailo and Makeieva, Hanna and Grydin, Olexandr and Frolov, Yaroslav and Schaper, Mirko}, year={2020}, pages={2009–2029} }' chicago: 'Stolbchenko, Mykhailo, Hanna Makeieva, Olexandr Grydin, Yaroslav Frolov, and Mirko Schaper. “Strain Parameters at Hot Rolling of Aluminum Strips Reinforced with Steel Netting.” Journal of Sandwich Structures & Materials 22, no. 6 (2020): 2009–29. https://doi.org/10.1177/1099636218792539.' ieee: 'M. Stolbchenko, H. Makeieva, O. Grydin, Y. Frolov, and M. Schaper, “Strain parameters at hot rolling of aluminum strips reinforced with steel netting,” Journal of Sandwich Structures & Materials, vol. 22, no. 6, pp. 2009–2029, 2020, doi: 10.1177/1099636218792539.' mla: Stolbchenko, Mykhailo, et al. “Strain Parameters at Hot Rolling of Aluminum Strips Reinforced with Steel Netting.” Journal of Sandwich Structures & Materials, vol. 22, no. 6, 2020, pp. 2009–29, doi:10.1177/1099636218792539. short: M. Stolbchenko, H. Makeieva, O. Grydin, Y. Frolov, M. Schaper, Journal of Sandwich Structures & Materials 22 (2020) 2009–2029. date_created: 2021-09-16T16:23:44Z date_updated: 2023-06-01T14:30:38Z department: - _id: '158' doi: 10.1177/1099636218792539 intvolume: ' 22' issue: '6' language: - iso: eng page: 2009-2029 publication: Journal of Sandwich Structures & Materials publication_identifier: issn: - 1099-6362 - 1530-7972 publication_status: published quality_controlled: '1' status: public title: Strain parameters at hot rolling of aluminum strips reinforced with steel netting type: journal_article user_id: '43720' volume: 22 year: '2020' ... --- _id: '41520' article_number: '139597' author: - first_name: Haoran full_name: Wu, Haoran last_name: Wu - first_name: T. full_name: Bill, T. last_name: Bill - first_name: Z.J. full_name: Teng, Z.J. last_name: Teng - first_name: Sudipta full_name: Pramanik, Sudipta last_name: Pramanik - first_name: Kay-Peter full_name: Hoyer, Kay-Peter id: '48411' last_name: Hoyer - first_name: Mirko full_name: Schaper, Mirko id: '43720' last_name: Schaper - first_name: Peter full_name: Starke, Peter last_name: Starke citation: ama: 'Wu H, Bill T, Teng ZJ, et al. Characterization of the fatigue behaviour for SAE 1045 steel without and with load-free sequences based on non-destructive, X-ray diffraction and transmission electron microscopic investigations. Materials Science and Engineering: A. 2020;794. doi:10.1016/j.msea.2020.139597' apa: 'Wu, H., Bill, T., Teng, Z. J., Pramanik, S., Hoyer, K.-P., Schaper, M., & Starke, P. (2020). Characterization of the fatigue behaviour for SAE 1045 steel without and with load-free sequences based on non-destructive, X-ray diffraction and transmission electron microscopic investigations. Materials Science and Engineering: A, 794, Article 139597. https://doi.org/10.1016/j.msea.2020.139597' bibtex: '@article{Wu_Bill_Teng_Pramanik_Hoyer_Schaper_Starke_2020, title={Characterization of the fatigue behaviour for SAE 1045 steel without and with load-free sequences based on non-destructive, X-ray diffraction and transmission electron microscopic investigations}, volume={794}, DOI={10.1016/j.msea.2020.139597}, number={139597}, journal={Materials Science and Engineering: A}, publisher={Elsevier BV}, author={Wu, Haoran and Bill, T. and Teng, Z.J. and Pramanik, Sudipta and Hoyer, Kay-Peter and Schaper, Mirko and Starke, Peter}, year={2020} }' chicago: 'Wu, Haoran, T. Bill, Z.J. Teng, Sudipta Pramanik, Kay-Peter Hoyer, Mirko Schaper, and Peter Starke. “Characterization of the Fatigue Behaviour for SAE 1045 Steel without and with Load-Free Sequences Based on Non-Destructive, X-Ray Diffraction and Transmission Electron Microscopic Investigations.” Materials Science and Engineering: A 794 (2020). https://doi.org/10.1016/j.msea.2020.139597.' ieee: 'H. Wu et al., “Characterization of the fatigue behaviour for SAE 1045 steel without and with load-free sequences based on non-destructive, X-ray diffraction and transmission electron microscopic investigations,” Materials Science and Engineering: A, vol. 794, Art. no. 139597, 2020, doi: 10.1016/j.msea.2020.139597.' mla: 'Wu, Haoran, et al. “Characterization of the Fatigue Behaviour for SAE 1045 Steel without and with Load-Free Sequences Based on Non-Destructive, X-Ray Diffraction and Transmission Electron Microscopic Investigations.” Materials Science and Engineering: A, vol. 794, 139597, Elsevier BV, 2020, doi:10.1016/j.msea.2020.139597.' short: 'H. Wu, T. Bill, Z.J. Teng, S. Pramanik, K.-P. Hoyer, M. Schaper, P. Starke, Materials Science and Engineering: A 794 (2020).' date_created: 2023-02-02T14:42:11Z date_updated: 2023-06-01T14:29:23Z department: - _id: '9' - _id: '158' doi: 10.1016/j.msea.2020.139597 intvolume: ' 794' keyword: - Mechanical Engineering - Mechanics of Materials - Condensed Matter Physics - General Materials Science language: - iso: eng publication: 'Materials Science and Engineering: A' publication_identifier: issn: - 0921-5093 publication_status: published publisher: Elsevier BV quality_controlled: '1' status: public title: Characterization of the fatigue behaviour for SAE 1045 steel without and with load-free sequences based on non-destructive, X-ray diffraction and transmission electron microscopic investigations type: journal_article user_id: '43720' volume: 794 year: '2020' ... --- _id: '41521' article_number: '125748' author: - first_name: Wolfgang full_name: Tillmann, Wolfgang last_name: Tillmann - first_name: Nelson Filipe full_name: Lopes Dias, Nelson Filipe last_name: Lopes Dias - first_name: Dominic full_name: Stangier, Dominic last_name: Stangier - first_name: Leif full_name: Hagen, Leif last_name: Hagen - first_name: Mirko full_name: Schaper, Mirko id: '43720' last_name: Schaper - first_name: Florian full_name: Hengsbach, Florian last_name: Hengsbach - first_name: Kay-Peter full_name: Hoyer, Kay-Peter id: '48411' last_name: Hoyer citation: ama: Tillmann W, Lopes Dias NF, Stangier D, et al. Tribo-mechanical properties and adhesion behavior of DLC coatings sputtered onto 36NiCrMo16 produced by selective laser melting. Surface and Coatings Technology. 2020;394. doi:10.1016/j.surfcoat.2020.125748 apa: Tillmann, W., Lopes Dias, N. F., Stangier, D., Hagen, L., Schaper, M., Hengsbach, F., & Hoyer, K.-P. (2020). Tribo-mechanical properties and adhesion behavior of DLC coatings sputtered onto 36NiCrMo16 produced by selective laser melting. Surface and Coatings Technology, 394, Article 125748. https://doi.org/10.1016/j.surfcoat.2020.125748 bibtex: '@article{Tillmann_Lopes Dias_Stangier_Hagen_Schaper_Hengsbach_Hoyer_2020, title={Tribo-mechanical properties and adhesion behavior of DLC coatings sputtered onto 36NiCrMo16 produced by selective laser melting}, volume={394}, DOI={10.1016/j.surfcoat.2020.125748}, number={125748}, journal={Surface and Coatings Technology}, publisher={Elsevier BV}, author={Tillmann, Wolfgang and Lopes Dias, Nelson Filipe and Stangier, Dominic and Hagen, Leif and Schaper, Mirko and Hengsbach, Florian and Hoyer, Kay-Peter}, year={2020} }' chicago: Tillmann, Wolfgang, Nelson Filipe Lopes Dias, Dominic Stangier, Leif Hagen, Mirko Schaper, Florian Hengsbach, and Kay-Peter Hoyer. “Tribo-Mechanical Properties and Adhesion Behavior of DLC Coatings Sputtered onto 36NiCrMo16 Produced by Selective Laser Melting.” Surface and Coatings Technology 394 (2020). https://doi.org/10.1016/j.surfcoat.2020.125748. ieee: 'W. Tillmann et al., “Tribo-mechanical properties and adhesion behavior of DLC coatings sputtered onto 36NiCrMo16 produced by selective laser melting,” Surface and Coatings Technology, vol. 394, Art. no. 125748, 2020, doi: 10.1016/j.surfcoat.2020.125748.' mla: Tillmann, Wolfgang, et al. “Tribo-Mechanical Properties and Adhesion Behavior of DLC Coatings Sputtered onto 36NiCrMo16 Produced by Selective Laser Melting.” Surface and Coatings Technology, vol. 394, 125748, Elsevier BV, 2020, doi:10.1016/j.surfcoat.2020.125748. short: W. Tillmann, N.F. Lopes Dias, D. Stangier, L. Hagen, M. Schaper, F. Hengsbach, K.-P. Hoyer, Surface and Coatings Technology 394 (2020). date_created: 2023-02-02T14:43:02Z date_updated: 2023-06-01T14:29:36Z department: - _id: '9' - _id: '158' doi: 10.1016/j.surfcoat.2020.125748 intvolume: ' 394' keyword: - Materials Chemistry - Surfaces - Coatings and Films - Surfaces and Interfaces - Condensed Matter Physics - General Chemistry language: - iso: eng publication: Surface and Coatings Technology publication_identifier: issn: - 0257-8972 publication_status: published publisher: Elsevier BV quality_controlled: '1' status: public title: Tribo-mechanical properties and adhesion behavior of DLC coatings sputtered onto 36NiCrMo16 produced by selective laser melting type: journal_article user_id: '43720' volume: 394 year: '2020' ... --- _id: '41522' author: - first_name: Anatolii full_name: Andreiev, Anatolii id: '50215' last_name: Andreiev - first_name: Kay-Peter full_name: Hoyer, Kay-Peter id: '48411' last_name: Hoyer - first_name: Olexandr full_name: Grydin, Olexandr id: '43822' last_name: Grydin - first_name: Yaroslav full_name: Frolov, Yaroslav last_name: Frolov - first_name: Mirko full_name: Schaper, Mirko id: '43720' last_name: Schaper citation: ama: Andreiev A, Hoyer K-P, Grydin O, Frolov Y, Schaper M. Degradable silver‐based alloys. Materialwissenschaft und Werkstofftechnik. 2020;51(4):517-530. doi:10.1002/mawe.201900191 apa: Andreiev, A., Hoyer, K.-P., Grydin, O., Frolov, Y., & Schaper, M. (2020). Degradable silver‐based alloys. Materialwissenschaft Und Werkstofftechnik, 51(4), 517–530. https://doi.org/10.1002/mawe.201900191 bibtex: '@article{Andreiev_Hoyer_Grydin_Frolov_Schaper_2020, title={Degradable silver‐based alloys}, volume={51}, DOI={10.1002/mawe.201900191}, number={4}, journal={Materialwissenschaft und Werkstofftechnik}, publisher={Wiley}, author={Andreiev, Anatolii and Hoyer, Kay-Peter and Grydin, Olexandr and Frolov, Yaroslav and Schaper, Mirko}, year={2020}, pages={517–530} }' chicago: 'Andreiev, Anatolii, Kay-Peter Hoyer, Olexandr Grydin, Yaroslav Frolov, and Mirko Schaper. “Degradable Silver‐based Alloys.” Materialwissenschaft Und Werkstofftechnik 51, no. 4 (2020): 517–30. https://doi.org/10.1002/mawe.201900191.' ieee: 'A. Andreiev, K.-P. Hoyer, O. Grydin, Y. Frolov, and M. Schaper, “Degradable silver‐based alloys,” Materialwissenschaft und Werkstofftechnik, vol. 51, no. 4, pp. 517–530, 2020, doi: 10.1002/mawe.201900191.' mla: Andreiev, Anatolii, et al. “Degradable Silver‐based Alloys.” Materialwissenschaft Und Werkstofftechnik, vol. 51, no. 4, Wiley, 2020, pp. 517–30, doi:10.1002/mawe.201900191. short: A. Andreiev, K.-P. Hoyer, O. Grydin, Y. Frolov, M. Schaper, Materialwissenschaft Und Werkstofftechnik 51 (2020) 517–530. date_created: 2023-02-02T14:43:22Z date_updated: 2023-06-01T14:29:46Z department: - _id: '9' - _id: '158' doi: 10.1002/mawe.201900191 intvolume: ' 51' issue: '4' keyword: - Mechanical Engineering - Mechanics of Materials - Condensed Matter Physics - General Materials Science language: - iso: eng page: 517-530 publication: Materialwissenschaft und Werkstofftechnik publication_identifier: issn: - 0933-5137 - 1521-4052 publication_status: published publisher: Wiley quality_controlled: '1' status: public title: Degradable silver‐based alloys type: journal_article user_id: '43720' volume: 51 year: '2020' ... --- _id: '24571' author: - first_name: Mykhailo full_name: Stolbchenko, Mykhailo last_name: Stolbchenko - first_name: Yaroslav full_name: Frolov, Yaroslav last_name: Frolov - first_name: Hanna full_name: Makeieva, Hanna last_name: Makeieva - first_name: Olexandr full_name: Grydin, Olexandr id: '43822' last_name: Grydin - first_name: Michael A. full_name: Tershakovec, Michael A. last_name: Tershakovec - first_name: Mirko full_name: Schaper, Mirko id: '43720' last_name: Schaper citation: ama: Stolbchenko M, Frolov Y, Makeieva H, Grydin O, Tershakovec MA, Schaper M. The mechanical properties of rolled wire-reinforced aluminum composites at different strain values. Mechanics of Advanced Materials and Structures. 2020;27(18):1599-1608. doi:10.1080/15376494.2018.1520941 apa: Stolbchenko, M., Frolov, Y., Makeieva, H., Grydin, O., Tershakovec, M. A., & Schaper, M. (2020). The mechanical properties of rolled wire-reinforced aluminum composites at different strain values. Mechanics of Advanced Materials and Structures, 27(18), 1599–1608. https://doi.org/10.1080/15376494.2018.1520941 bibtex: '@article{Stolbchenko_Frolov_Makeieva_Grydin_Tershakovec_Schaper_2020, title={The mechanical properties of rolled wire-reinforced aluminum composites at different strain values}, volume={27}, DOI={10.1080/15376494.2018.1520941}, number={18}, journal={Mechanics of Advanced Materials and Structures}, author={Stolbchenko, Mykhailo and Frolov, Yaroslav and Makeieva, Hanna and Grydin, Olexandr and Tershakovec, Michael A. and Schaper, Mirko}, year={2020}, pages={1599–1608} }' chicago: 'Stolbchenko, Mykhailo, Yaroslav Frolov, Hanna Makeieva, Olexandr Grydin, Michael A. Tershakovec, and Mirko Schaper. “The Mechanical Properties of Rolled Wire-Reinforced Aluminum Composites at Different Strain Values.” Mechanics of Advanced Materials and Structures 27, no. 18 (2020): 1599–1608. https://doi.org/10.1080/15376494.2018.1520941.' ieee: 'M. Stolbchenko, Y. Frolov, H. Makeieva, O. Grydin, M. A. Tershakovec, and M. Schaper, “The mechanical properties of rolled wire-reinforced aluminum composites at different strain values,” Mechanics of Advanced Materials and Structures, vol. 27, no. 18, pp. 1599–1608, 2020, doi: 10.1080/15376494.2018.1520941.' mla: Stolbchenko, Mykhailo, et al. “The Mechanical Properties of Rolled Wire-Reinforced Aluminum Composites at Different Strain Values.” Mechanics of Advanced Materials and Structures, vol. 27, no. 18, 2020, pp. 1599–608, doi:10.1080/15376494.2018.1520941. short: M. Stolbchenko, Y. Frolov, H. Makeieva, O. Grydin, M.A. Tershakovec, M. Schaper, Mechanics of Advanced Materials and Structures 27 (2020) 1599–1608. date_created: 2021-09-16T16:22:31Z date_updated: 2023-06-01T14:30:26Z department: - _id: '158' doi: 10.1080/15376494.2018.1520941 intvolume: ' 27' issue: '18' language: - iso: eng page: 1599-1608 publication: Mechanics of Advanced Materials and Structures publication_identifier: issn: - 1537-6494 - 1537-6532 publication_status: published quality_controlled: '1' status: public title: The mechanical properties of rolled wire-reinforced aluminum composites at different strain values type: journal_article user_id: '43720' volume: 27 year: '2020' ... --- _id: '24254' author: - first_name: Wolfgang full_name: Tillmann, Wolfgang last_name: Tillmann - first_name: Leif full_name: Hagen, Leif last_name: Hagen - first_name: Kai-Uwe full_name: Garthe, Kai-Uwe id: '11199' last_name: Garthe orcid: 0000-0003-0741-3812 - first_name: Kay-Peter full_name: Hoyer, Kay-Peter id: '48411' last_name: Hoyer - first_name: Mirko full_name: Schaper, Mirko id: '43720' last_name: Schaper citation: ama: Tillmann W, Hagen L, Garthe K-U, Hoyer K-P, Schaper M. Effect of substrate pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt coated additive manufactured 316 L substrates. Materialwissenschaft und Werkstofftechnik. Published online 2020:1452-1464. doi:10.1002/mawe.202000109 apa: Tillmann, W., Hagen, L., Garthe, K.-U., Hoyer, K.-P., & Schaper, M. (2020). Effect of substrate pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt coated additive manufactured 316 L substrates. Materialwissenschaft Und Werkstofftechnik, 1452–1464. https://doi.org/10.1002/mawe.202000109 bibtex: '@article{Tillmann_Hagen_Garthe_Hoyer_Schaper_2020, title={Effect of substrate pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt coated additive manufactured 316 L substrates}, DOI={10.1002/mawe.202000109}, journal={Materialwissenschaft und Werkstofftechnik}, author={Tillmann, Wolfgang and Hagen, Leif and Garthe, Kai-Uwe and Hoyer, Kay-Peter and Schaper, Mirko}, year={2020}, pages={1452–1464} }' chicago: Tillmann, Wolfgang, Leif Hagen, Kai-Uwe Garthe, Kay-Peter Hoyer, and Mirko Schaper. “Effect of Substrate Pre‐treatment on the Low Cycle Fatigue Performance of Tungsten Carbide‐cobalt Coated Additive Manufactured 316 L Substrates.” Materialwissenschaft Und Werkstofftechnik, 2020, 1452–64. https://doi.org/10.1002/mawe.202000109. ieee: 'W. Tillmann, L. Hagen, K.-U. Garthe, K.-P. Hoyer, and M. Schaper, “Effect of substrate pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt coated additive manufactured 316 L substrates,” Materialwissenschaft und Werkstofftechnik, pp. 1452–1464, 2020, doi: 10.1002/mawe.202000109.' mla: Tillmann, Wolfgang, et al. “Effect of Substrate Pre‐treatment on the Low Cycle Fatigue Performance of Tungsten Carbide‐cobalt Coated Additive Manufactured 316 L Substrates.” Materialwissenschaft Und Werkstofftechnik, 2020, pp. 1452–64, doi:10.1002/mawe.202000109. short: W. Tillmann, L. Hagen, K.-U. Garthe, K.-P. Hoyer, M. Schaper, Materialwissenschaft Und Werkstofftechnik (2020) 1452–1464. date_created: 2021-09-13T09:14:34Z date_updated: 2023-06-01T14:31:06Z department: - _id: '158' doi: 10.1002/mawe.202000109 language: - iso: eng page: 1452-1464 publication: Materialwissenschaft und Werkstofftechnik publication_identifier: issn: - 0933-5137 - 1521-4052 publication_status: published quality_controlled: '1' status: public title: Effect of substrate pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt coated additive manufactured 316 L substrates type: journal_article user_id: '43720' year: '2020' ... --- _id: '24092' abstract: - lang: eng text: AbstractDifferent studies have been demonstrated that the surface integrity of substrate bulk materials to be coated has a significant impact on the adhesion of thermally sprayed coatings. It is known that the surface integrity of parts processed by selective laser melting (SLM) differs from those obtained from bulk materials. Although 316L stainless steel is among the most investigated material for SLM, the adhesion of thermally sprayed coatings on 316L stainless steel substrates processed by SLM has not been studied yet. This study aims at evaluating the effect of various mechanical pre-treatments onto 316L stainless steel substrates processed by SLM and their effect on the adhesion of high velocity oxy-fuel (HVOF)-sprayed WC-Co coatings. To differentiate between topographical effects and residual stress-related phenomena, a stress-relief heat treatment of the SLM substrates served as a reference throughout the investigations. The differently pre-treated SLM substrates were investigated with regard to the surface roughness and residual stresses. For the HVOF-sprayed SLM composites, Vickers interfacial indentation tests were conducted to assess the resulting coating adhesion. The findings demonstrated that the HVOF-sprayed WC-Co coatings predominantly exhibit good adhesion to the SLM 316L substrates. However, it was found that the stress state in the SLM 316L substrate surface is more likely to affect the adhesion of the WC-Co coating, while the substrate surface roughness showed a marginal effect. author: - first_name: Wolfgang full_name: Tillmann, Wolfgang last_name: Tillmann - first_name: Leif full_name: Hagen, Leif last_name: Hagen - first_name: Christopher full_name: Schaak, Christopher last_name: Schaak - first_name: Jan full_name: Liß, Jan last_name: Liß - first_name: Mirko full_name: Schaper, Mirko id: '43720' last_name: Schaper - first_name: Kay-Peter full_name: Hoyer, Kay-Peter id: '48411' last_name: Hoyer - first_name: Mehmet Esat full_name: Aydinöz, Mehmet Esat last_name: Aydinöz - first_name: Kai-Uwe full_name: Garthe, Kai-Uwe id: '11199' last_name: Garthe orcid: 0000-0003-0741-3812 citation: ama: Tillmann W, Hagen L, Schaak C, et al. Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM. Journal of Thermal Spray Technology. Published online 2020:1396-1409. doi:10.1007/s11666-020-01081-y apa: Tillmann, W., Hagen, L., Schaak, C., Liß, J., Schaper, M., Hoyer, K.-P., Aydinöz, M. E., & Garthe, K.-U. (2020). Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM. Journal of Thermal Spray Technology, 1396–1409. https://doi.org/10.1007/s11666-020-01081-y bibtex: '@article{Tillmann_Hagen_Schaak_Liß_Schaper_Hoyer_Aydinöz_Garthe_2020, title={Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM}, DOI={10.1007/s11666-020-01081-y}, journal={Journal of Thermal Spray Technology}, author={Tillmann, Wolfgang and Hagen, Leif and Schaak, Christopher and Liß, Jan and Schaper, Mirko and Hoyer, Kay-Peter and Aydinöz, Mehmet Esat and Garthe, Kai-Uwe}, year={2020}, pages={1396–1409} }' chicago: Tillmann, Wolfgang, Leif Hagen, Christopher Schaak, Jan Liß, Mirko Schaper, Kay-Peter Hoyer, Mehmet Esat Aydinöz, and Kai-Uwe Garthe. “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM.” Journal of Thermal Spray Technology, 2020, 1396–1409. https://doi.org/10.1007/s11666-020-01081-y. ieee: 'W. Tillmann et al., “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM,” Journal of Thermal Spray Technology, pp. 1396–1409, 2020, doi: 10.1007/s11666-020-01081-y.' mla: Tillmann, Wolfgang, et al. “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM.” Journal of Thermal Spray Technology, 2020, pp. 1396–409, doi:10.1007/s11666-020-01081-y. short: W. Tillmann, L. Hagen, C. Schaak, J. Liß, M. Schaper, K.-P. Hoyer, M.E. Aydinöz, K.-U. Garthe, Journal of Thermal Spray Technology (2020) 1396–1409. date_created: 2021-09-09T15:52:15Z date_updated: 2023-06-01T14:31:48Z department: - _id: '158' doi: 10.1007/s11666-020-01081-y language: - iso: eng page: 1396-1409 publication: Journal of Thermal Spray Technology publication_identifier: issn: - 1059-9630 - 1544-1016 publication_status: published quality_controlled: '1' status: public title: Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM type: journal_article user_id: '43720' year: '2020' ... --- _id: '24255' abstract: - lang: eng text: AbstractDifferent studies have been demonstrated that the surface integrity of substrate bulk materials to be coated has a significant impact on the adhesion of thermally sprayed coatings. It is known that the surface integrity of parts processed by selective laser melting (SLM) differs from those obtained from bulk materials. Although 316L stainless steel is among the most investigated material for SLM, the adhesion of thermally sprayed coatings on 316L stainless steel substrates processed by SLM has not been studied yet. This study aims at evaluating the effect of various mechanical pre-treatments onto 316L stainless steel substrates processed by SLM and their effect on the adhesion of high velocity oxy-fuel (HVOF)-sprayed WC-Co coatings. To differentiate between topographical effects and residual stress-related phenomena, a stress-relief heat treatment of the SLM substrates served as a reference throughout the investigations. The differently pre-treated SLM substrates were investigated with regard to the surface roughness and residual stresses. For the HVOF-sprayed SLM composites, Vickers interfacial indentation tests were conducted to assess the resulting coating adhesion. The findings demonstrated that the HVOF-sprayed WC-Co coatings predominantly exhibit good adhesion to the SLM 316L substrates. However, it was found that the stress state in the SLM 316L substrate surface is more likely to affect the adhesion of the WC-Co coating, while the substrate surface roughness showed a marginal effect. author: - first_name: W. full_name: Tillmann, W. last_name: Tillmann - first_name: L. full_name: Hagen, L. last_name: Hagen - first_name: C. full_name: Schaak, C. last_name: Schaak - first_name: J. full_name: Liß, J. last_name: Liß - first_name: Mirko full_name: Schaper, Mirko id: '43720' last_name: Schaper - first_name: Kay-Peter full_name: Hoyer, Kay-Peter id: '48411' last_name: Hoyer - first_name: M. E. full_name: Aydinöz, M. E. last_name: Aydinöz - first_name: Kai-Uwe full_name: Garthe, Kai-Uwe id: '11199' last_name: Garthe orcid: 0000-0003-0741-3812 citation: ama: Tillmann W, Hagen L, Schaak C, et al. Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM. Journal of Thermal Spray Technology. Published online 2020:1396-1409. doi:10.1007/s11666-020-01081-y apa: Tillmann, W., Hagen, L., Schaak, C., Liß, J., Schaper, M., Hoyer, K.-P., Aydinöz, M. E., & Garthe, K.-U. (2020). Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM. Journal of Thermal Spray Technology, 1396–1409. https://doi.org/10.1007/s11666-020-01081-y bibtex: '@article{Tillmann_Hagen_Schaak_Liß_Schaper_Hoyer_Aydinöz_Garthe_2020, title={Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM}, DOI={10.1007/s11666-020-01081-y}, journal={Journal of Thermal Spray Technology}, author={Tillmann, W. and Hagen, L. and Schaak, C. and Liß, J. and Schaper, Mirko and Hoyer, Kay-Peter and Aydinöz, M. E. and Garthe, Kai-Uwe}, year={2020}, pages={1396–1409} }' chicago: Tillmann, W., L. Hagen, C. Schaak, J. Liß, Mirko Schaper, Kay-Peter Hoyer, M. E. Aydinöz, and Kai-Uwe Garthe. “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM.” Journal of Thermal Spray Technology, 2020, 1396–1409. https://doi.org/10.1007/s11666-020-01081-y. ieee: 'W. Tillmann et al., “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM,” Journal of Thermal Spray Technology, pp. 1396–1409, 2020, doi: 10.1007/s11666-020-01081-y.' mla: Tillmann, W., et al. “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM.” Journal of Thermal Spray Technology, 2020, pp. 1396–409, doi:10.1007/s11666-020-01081-y. short: W. Tillmann, L. Hagen, C. Schaak, J. Liß, M. Schaper, K.-P. Hoyer, M.E. Aydinöz, K.-U. Garthe, Journal of Thermal Spray Technology (2020) 1396–1409. date_created: 2021-09-13T09:15:27Z date_updated: 2023-06-01T14:31:19Z department: - _id: '158' doi: 10.1007/s11666-020-01081-y language: - iso: eng page: 1396-1409 publication: Journal of Thermal Spray Technology publication_identifier: issn: - 1059-9630 - 1544-1016 publication_status: published quality_controlled: '1' status: public title: Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM type: journal_article user_id: '43720' year: '2020' ... --- _id: '24093' article_number: '139597' author: - first_name: Haoran full_name: Wu, Haoran last_name: Wu - first_name: Tobias full_name: Bill, Tobias last_name: Bill - first_name: Zhenjie full_name: Teng, Zhenjie last_name: Teng - first_name: Sudipta full_name: Pramanik, Sudipta last_name: Pramanik - first_name: Kay-Peter full_name: Hoyer, Kay-Peter id: '48411' last_name: Hoyer - first_name: Mirko full_name: Schaper, Mirko id: '43720' last_name: Schaper - first_name: Peter full_name: Starke, Peter last_name: Starke citation: ama: 'Wu H, Bill T, Teng Z, et al. Characterization of the fatigue behaviour for SAE 1045 steel without and with load-free sequences based on non-destructive, X-ray diffraction and transmission electron microscopic investigations. Materials Science and Engineering: A. Published online 2020. doi:10.1016/j.msea.2020.139597' apa: 'Wu, H., Bill, T., Teng, Z., Pramanik, S., Hoyer, K.-P., Schaper, M., & Starke, P. (2020). Characterization of the fatigue behaviour for SAE 1045 steel without and with load-free sequences based on non-destructive, X-ray diffraction and transmission electron microscopic investigations. Materials Science and Engineering: A, Article 139597. https://doi.org/10.1016/j.msea.2020.139597' bibtex: '@article{Wu_Bill_Teng_Pramanik_Hoyer_Schaper_Starke_2020, title={Characterization of the fatigue behaviour for SAE 1045 steel without and with load-free sequences based on non-destructive, X-ray diffraction and transmission electron microscopic investigations}, DOI={10.1016/j.msea.2020.139597}, number={139597}, journal={Materials Science and Engineering: A}, author={Wu, Haoran and Bill, Tobias and Teng, Zhenjie and Pramanik, Sudipta and Hoyer, Kay-Peter and Schaper, Mirko and Starke, Peter}, year={2020} }' chicago: 'Wu, Haoran, Tobias Bill, Zhenjie Teng, Sudipta Pramanik, Kay-Peter Hoyer, Mirko Schaper, and Peter Starke. “Characterization of the Fatigue Behaviour for SAE 1045 Steel without and with Load-Free Sequences Based on Non-Destructive, X-Ray Diffraction and Transmission Electron Microscopic Investigations.” Materials Science and Engineering: A, 2020. https://doi.org/10.1016/j.msea.2020.139597.' ieee: 'H. Wu et al., “Characterization of the fatigue behaviour for SAE 1045 steel without and with load-free sequences based on non-destructive, X-ray diffraction and transmission electron microscopic investigations,” Materials Science and Engineering: A, Art. no. 139597, 2020, doi: 10.1016/j.msea.2020.139597.' mla: 'Wu, Haoran, et al. “Characterization of the Fatigue Behaviour for SAE 1045 Steel without and with Load-Free Sequences Based on Non-Destructive, X-Ray Diffraction and Transmission Electron Microscopic Investigations.” Materials Science and Engineering: A, 139597, 2020, doi:10.1016/j.msea.2020.139597.' short: 'H. Wu, T. Bill, Z. Teng, S. Pramanik, K.-P. Hoyer, M. Schaper, P. Starke, Materials Science and Engineering: A (2020).' date_created: 2021-09-09T15:54:23Z date_updated: 2023-06-01T14:32:04Z department: - _id: '158' doi: 10.1016/j.msea.2020.139597 language: - iso: eng publication: 'Materials Science and Engineering: A' publication_identifier: issn: - 0921-5093 publication_status: published quality_controlled: '1' status: public title: Characterization of the fatigue behaviour for SAE 1045 steel without and with load-free sequences based on non-destructive, X-ray diffraction and transmission electron microscopic investigations type: journal_article user_id: '43720' year: '2020' ... --- _id: '24094' article_number: '125748' author: - first_name: Wolfgang full_name: Tillmann, Wolfgang last_name: Tillmann - first_name: Nelson Filipe full_name: Lopes Dias, Nelson Filipe last_name: Lopes Dias - first_name: Dominic full_name: Stangier, Dominic last_name: Stangier - first_name: Leif full_name: Hagen, Leif last_name: Hagen - first_name: Mirko full_name: Schaper, Mirko id: '43720' last_name: Schaper - first_name: Florian full_name: Hengsbach, Florian last_name: Hengsbach - first_name: Kay-Peter full_name: Hoyer, Kay-Peter id: '48411' last_name: Hoyer citation: ama: Tillmann W, Lopes Dias NF, Stangier D, et al. Tribo-mechanical properties and adhesion behavior of DLC coatings sputtered onto 36NiCrMo16 produced by selective laser melting. Surface and Coatings Technology. Published online 2020. doi:10.1016/j.surfcoat.2020.125748 apa: Tillmann, W., Lopes Dias, N. F., Stangier, D., Hagen, L., Schaper, M., Hengsbach, F., & Hoyer, K.-P. (2020). Tribo-mechanical properties and adhesion behavior of DLC coatings sputtered onto 36NiCrMo16 produced by selective laser melting. Surface and Coatings Technology, Article 125748. https://doi.org/10.1016/j.surfcoat.2020.125748 bibtex: '@article{Tillmann_Lopes Dias_Stangier_Hagen_Schaper_Hengsbach_Hoyer_2020, title={Tribo-mechanical properties and adhesion behavior of DLC coatings sputtered onto 36NiCrMo16 produced by selective laser melting}, DOI={10.1016/j.surfcoat.2020.125748}, number={125748}, journal={Surface and Coatings Technology}, author={Tillmann, Wolfgang and Lopes Dias, Nelson Filipe and Stangier, Dominic and Hagen, Leif and Schaper, Mirko and Hengsbach, Florian and Hoyer, Kay-Peter}, year={2020} }' chicago: Tillmann, Wolfgang, Nelson Filipe Lopes Dias, Dominic Stangier, Leif Hagen, Mirko Schaper, Florian Hengsbach, and Kay-Peter Hoyer. “Tribo-Mechanical Properties and Adhesion Behavior of DLC Coatings Sputtered onto 36NiCrMo16 Produced by Selective Laser Melting.” Surface and Coatings Technology, 2020. https://doi.org/10.1016/j.surfcoat.2020.125748. ieee: 'W. Tillmann et al., “Tribo-mechanical properties and adhesion behavior of DLC coatings sputtered onto 36NiCrMo16 produced by selective laser melting,” Surface and Coatings Technology, Art. no. 125748, 2020, doi: 10.1016/j.surfcoat.2020.125748.' mla: Tillmann, Wolfgang, et al. “Tribo-Mechanical Properties and Adhesion Behavior of DLC Coatings Sputtered onto 36NiCrMo16 Produced by Selective Laser Melting.” Surface and Coatings Technology, 125748, 2020, doi:10.1016/j.surfcoat.2020.125748. short: W. Tillmann, N.F. Lopes Dias, D. Stangier, L. Hagen, M. Schaper, F. Hengsbach, K.-P. Hoyer, Surface and Coatings Technology (2020). date_created: 2021-09-09T15:55:29Z date_updated: 2023-06-01T14:32:17Z department: - _id: '158' doi: 10.1016/j.surfcoat.2020.125748 language: - iso: eng publication: Surface and Coatings Technology publication_identifier: issn: - 0257-8972 publication_status: published quality_controlled: '1' status: public title: Tribo-mechanical properties and adhesion behavior of DLC coatings sputtered onto 36NiCrMo16 produced by selective laser melting type: journal_article user_id: '43720' year: '2020' ... --- _id: '24091' author: - first_name: Wolfgang full_name: Tillmann, Wolfgang last_name: Tillmann - first_name: Leif full_name: Hagen, Leif last_name: Hagen - first_name: Kai-Uwe full_name: Garthe, Kai-Uwe id: '11199' last_name: Garthe orcid: 0000-0003-0741-3812 - first_name: Kay-Peter full_name: Hoyer, Kay-Peter id: '48411' last_name: Hoyer - first_name: Mirko full_name: Schaper, Mirko id: '43720' last_name: Schaper citation: ama: Tillmann W, Hagen L, Garthe K-U, Hoyer K-P, Schaper M. Effect of substrate pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt coated additive manufactured 316 L substrates. Materialwissenschaft und Werkstofftechnik. Published online 2020:1452-1464. doi:10.1002/mawe.202000109 apa: Tillmann, W., Hagen, L., Garthe, K.-U., Hoyer, K.-P., & Schaper, M. (2020). Effect of substrate pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt coated additive manufactured 316 L substrates. Materialwissenschaft Und Werkstofftechnik, 1452–1464. https://doi.org/10.1002/mawe.202000109 bibtex: '@article{Tillmann_Hagen_Garthe_Hoyer_Schaper_2020, title={Effect of substrate pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt coated additive manufactured 316 L substrates}, DOI={10.1002/mawe.202000109}, journal={Materialwissenschaft und Werkstofftechnik}, author={Tillmann, Wolfgang and Hagen, Leif and Garthe, Kai-Uwe and Hoyer, Kay-Peter and Schaper, Mirko}, year={2020}, pages={1452–1464} }' chicago: Tillmann, Wolfgang, Leif Hagen, Kai-Uwe Garthe, Kay-Peter Hoyer, and Mirko Schaper. “Effect of Substrate Pre‐treatment on the Low Cycle Fatigue Performance of Tungsten Carbide‐cobalt Coated Additive Manufactured 316 L Substrates.” Materialwissenschaft Und Werkstofftechnik, 2020, 1452–64. https://doi.org/10.1002/mawe.202000109. ieee: 'W. Tillmann, L. Hagen, K.-U. Garthe, K.-P. Hoyer, and M. Schaper, “Effect of substrate pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt coated additive manufactured 316 L substrates,” Materialwissenschaft und Werkstofftechnik, pp. 1452–1464, 2020, doi: 10.1002/mawe.202000109.' mla: Tillmann, Wolfgang, et al. “Effect of Substrate Pre‐treatment on the Low Cycle Fatigue Performance of Tungsten Carbide‐cobalt Coated Additive Manufactured 316 L Substrates.” Materialwissenschaft Und Werkstofftechnik, 2020, pp. 1452–64, doi:10.1002/mawe.202000109. short: W. Tillmann, L. Hagen, K.-U. Garthe, K.-P. Hoyer, M. Schaper, Materialwissenschaft Und Werkstofftechnik (2020) 1452–1464. date_created: 2021-09-09T15:51:14Z date_updated: 2023-06-01T14:31:33Z department: - _id: '158' doi: 10.1002/mawe.202000109 language: - iso: eng page: 1452-1464 publication: Materialwissenschaft und Werkstofftechnik publication_identifier: issn: - 0933-5137 - 1521-4052 publication_status: published quality_controlled: '1' status: public title: Effect of substrate pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt coated additive manufactured 316 L substrates type: journal_article user_id: '43720' year: '2020' ... --- _id: '23899' article_number: '2000130' author: - first_name: Olexandr full_name: Grydin, Olexandr id: '43822' last_name: Grydin - first_name: Manuel full_name: Matzelt, Manuel last_name: Matzelt - first_name: Anatolii full_name: Andreiev, Anatolii id: '50215' last_name: Andreiev - first_name: Yaroslav full_name: Frolov, Yaroslav last_name: Frolov - first_name: Mirko full_name: Schaper, Mirko id: '43720' last_name: Schaper citation: ama: Grydin O, Matzelt M, Andreiev A, Frolov Y, Schaper M. Influence of Microstructure in Near‐Surface Areas of Feedstocks on the Bond Strength of Roll Bonded Aluminum Clads. Advanced Engineering Materials. Published online 2020. doi:10.1002/adem.202000130 apa: Grydin, O., Matzelt, M., Andreiev, A., Frolov, Y., & Schaper, M. (2020). Influence of Microstructure in Near‐Surface Areas of Feedstocks on the Bond Strength of Roll Bonded Aluminum Clads. Advanced Engineering Materials, Article 2000130. https://doi.org/10.1002/adem.202000130 bibtex: '@article{Grydin_Matzelt_Andreiev_Frolov_Schaper_2020, title={Influence of Microstructure in Near‐Surface Areas of Feedstocks on the Bond Strength of Roll Bonded Aluminum Clads}, DOI={10.1002/adem.202000130}, number={2000130}, journal={Advanced Engineering Materials}, author={Grydin, Olexandr and Matzelt, Manuel and Andreiev, Anatolii and Frolov, Yaroslav and Schaper, Mirko}, year={2020} }' chicago: Grydin, Olexandr, Manuel Matzelt, Anatolii Andreiev, Yaroslav Frolov, and Mirko Schaper. “Influence of Microstructure in Near‐Surface Areas of Feedstocks on the Bond Strength of Roll Bonded Aluminum Clads.” Advanced Engineering Materials, 2020. https://doi.org/10.1002/adem.202000130. ieee: 'O. Grydin, M. Matzelt, A. Andreiev, Y. Frolov, and M. Schaper, “Influence of Microstructure in Near‐Surface Areas of Feedstocks on the Bond Strength of Roll Bonded Aluminum Clads,” Advanced Engineering Materials, Art. no. 2000130, 2020, doi: 10.1002/adem.202000130.' mla: Grydin, Olexandr, et al. “Influence of Microstructure in Near‐Surface Areas of Feedstocks on the Bond Strength of Roll Bonded Aluminum Clads.” Advanced Engineering Materials, 2000130, 2020, doi:10.1002/adem.202000130. short: O. Grydin, M. Matzelt, A. Andreiev, Y. Frolov, M. Schaper, Advanced Engineering Materials (2020). date_created: 2021-09-08T07:29:58Z date_updated: 2023-06-01T14:32:53Z department: - _id: '158' - _id: '321' doi: 10.1002/adem.202000130 language: - iso: eng publication: Advanced Engineering Materials publication_identifier: issn: - 1438-1656 - 1527-2648 publication_status: published quality_controlled: '1' status: public title: Influence of Microstructure in Near‐Surface Areas of Feedstocks on the Bond Strength of Roll Bonded Aluminum Clads type: journal_article user_id: '43720' year: '2020' ... --- _id: '23896' author: - first_name: Anatolii full_name: Andreiev, Anatolii id: '50215' last_name: Andreiev - first_name: Kay-Peter full_name: Hoyer, Kay-Peter id: '48411' last_name: Hoyer - first_name: Olexandr full_name: Grydin, Olexandr id: '43822' last_name: Grydin - first_name: Yaroslaw full_name: Frolov, Yaroslaw last_name: Frolov - first_name: Mirko full_name: Schaper, Mirko id: '43720' last_name: Schaper citation: ama: Andreiev A, Hoyer K-P, Grydin O, Frolov Y, Schaper M. Degradable silver‐based alloys. Materialwissenschaft und Werkstofftechnik. Published online 2020:517-530. doi:10.1002/mawe.201900191 apa: Andreiev, A., Hoyer, K.-P., Grydin, O., Frolov, Y., & Schaper, M. (2020). Degradable silver‐based alloys. Materialwissenschaft Und Werkstofftechnik, 517–530. https://doi.org/10.1002/mawe.201900191 bibtex: '@article{Andreiev_Hoyer_Grydin_Frolov_Schaper_2020, title={Degradable silver‐based alloys}, DOI={10.1002/mawe.201900191}, journal={Materialwissenschaft und Werkstofftechnik}, author={Andreiev, Anatolii and Hoyer, Kay-Peter and Grydin, Olexandr and Frolov, Yaroslaw and Schaper, Mirko}, year={2020}, pages={517–530} }' chicago: Andreiev, Anatolii, Kay-Peter Hoyer, Olexandr Grydin, Yaroslaw Frolov, and Mirko Schaper. “Degradable Silver‐based Alloys.” Materialwissenschaft Und Werkstofftechnik, 2020, 517–30. https://doi.org/10.1002/mawe.201900191. ieee: 'A. Andreiev, K.-P. Hoyer, O. Grydin, Y. Frolov, and M. Schaper, “Degradable silver‐based alloys,” Materialwissenschaft und Werkstofftechnik, pp. 517–530, 2020, doi: 10.1002/mawe.201900191.' mla: Andreiev, Anatolii, et al. “Degradable Silver‐based Alloys.” Materialwissenschaft Und Werkstofftechnik, 2020, pp. 517–30, doi:10.1002/mawe.201900191. short: A. Andreiev, K.-P. Hoyer, O. Grydin, Y. Frolov, M. Schaper, Materialwissenschaft Und Werkstofftechnik (2020) 517–530. date_created: 2021-09-08T07:27:30Z date_updated: 2023-06-01T14:32:35Z department: - _id: '158' - _id: '321' doi: 10.1002/mawe.201900191 language: - iso: eng page: 517-530 publication: Materialwissenschaft und Werkstofftechnik publication_identifier: issn: - 0933-5137 - 1521-4052 publication_status: published quality_controlled: '1' status: public title: Degradable silver‐based alloys type: journal_article user_id: '43720' year: '2020' ... --- _id: '37238' author: - first_name: Nadine full_name: Wallmeier, Nadine id: '22403' last_name: Wallmeier - first_name: Katrin full_name: Kuhmichel, Katrin last_name: Kuhmichel - first_name: Gero full_name: Gehrke, Gero last_name: Gehrke - first_name: Stephanie full_name: Sauermilch, Stephanie last_name: Sauermilch citation: ama: Wallmeier N, Kuhmichel K, Gehrke G, Sauermilch S. Dialektatlas Mittleres Westdeutschland (DMW) - Methodik, Akquise, Exploration und Analyse. Niederdeutsches Wort. 2020;60. apa: Wallmeier, N., Kuhmichel, K., Gehrke, G., & Sauermilch, S. (2020). Dialektatlas Mittleres Westdeutschland (DMW) - Methodik, Akquise, Exploration und Analyse. Niederdeutsches Wort, 60. bibtex: '@article{Wallmeier_Kuhmichel_Gehrke_Sauermilch_2020, title={Dialektatlas Mittleres Westdeutschland (DMW) - Methodik, Akquise, Exploration und Analyse}, volume={60}, journal={Niederdeutsches Wort}, author={Wallmeier, Nadine and Kuhmichel, Katrin and Gehrke, Gero and Sauermilch, Stephanie}, year={2020} }' chicago: Wallmeier, Nadine, Katrin Kuhmichel, Gero Gehrke, and Stephanie Sauermilch. “Dialektatlas Mittleres Westdeutschland (DMW) - Methodik, Akquise, Exploration Und Analyse.” Niederdeutsches Wort 60 (2020). ieee: N. Wallmeier, K. Kuhmichel, G. Gehrke, and S. Sauermilch, “Dialektatlas Mittleres Westdeutschland (DMW) - Methodik, Akquise, Exploration und Analyse,” Niederdeutsches Wort, vol. 60, 2020. mla: Wallmeier, Nadine, et al. “Dialektatlas Mittleres Westdeutschland (DMW) - Methodik, Akquise, Exploration Und Analyse.” Niederdeutsches Wort, vol. 60, 2020. short: N. Wallmeier, K. Kuhmichel, G. Gehrke, S. Sauermilch, Niederdeutsches Wort 60 (2020). date_created: 2023-01-18T08:04:37Z date_updated: 2023-06-05T09:10:47Z department: - _id: '115' intvolume: ' 60' language: - iso: eng project: - _id: '562' grant_number: I.A.24 name: 'DMW: Dialektatlas Mittleres Westdeutschland' publication: Niederdeutsches Wort status: public title: Dialektatlas Mittleres Westdeutschland (DMW) - Methodik, Akquise, Exploration und Analyse type: journal_article user_id: '22403' volume: 60 year: '2020' ... --- _id: '45465' author: - first_name: 'Jan ' full_name: 'Schröder, Jan ' last_name: Schröder - first_name: Christoph full_name: Vogelsang, Christoph id: '4245' last_name: Vogelsang - first_name: Josef full_name: Riese, Josef id: '429' last_name: Riese orcid: 0000-0003-2927-2619 citation: ama: 'Schröder J, Vogelsang C, Riese J. Messung der Fähigkeit zur Unterrichtsplanung bei Lehramtsstudierenden. In: Habig S, ed. Naturwissenschaftliche Kompetenzen in der Gesellschaft von morgen. Gesellschaft für Didaktik der Chemie und Physik. Jahrestagung in Wien 2019. Vol 40. ; 2020:435-438.' apa: Schröder, J., Vogelsang, C., & Riese, J. (2020). Messung der Fähigkeit zur Unterrichtsplanung bei Lehramtsstudierenden. In S. Habig (Ed.), Naturwissenschaftliche Kompetenzen in der Gesellschaft von morgen. Gesellschaft für Didaktik der Chemie und Physik. Jahrestagung in Wien 2019 (Vol. 40, pp. 435–438). bibtex: '@inproceedings{Schröder_Vogelsang_Riese_2020, title={Messung der Fähigkeit zur Unterrichtsplanung bei Lehramtsstudierenden}, volume={40}, booktitle={Naturwissenschaftliche Kompetenzen in der Gesellschaft von morgen. Gesellschaft für Didaktik der Chemie und Physik. Jahrestagung in Wien 2019}, author={Schröder, Jan and Vogelsang, Christoph and Riese, Josef}, editor={Habig, Sebastian}, year={2020}, pages={435–438} }' chicago: Schröder, Jan , Christoph Vogelsang, and Josef Riese. “Messung der Fähigkeit zur Unterrichtsplanung bei Lehramtsstudierenden.” In Naturwissenschaftliche Kompetenzen in der Gesellschaft von morgen. Gesellschaft für Didaktik der Chemie und Physik. Jahrestagung in Wien 2019, edited by Sebastian Habig, 40:435–38, 2020. ieee: J. Schröder, C. Vogelsang, and J. Riese, “Messung der Fähigkeit zur Unterrichtsplanung bei Lehramtsstudierenden,” in Naturwissenschaftliche Kompetenzen in der Gesellschaft von morgen. Gesellschaft für Didaktik der Chemie und Physik. Jahrestagung in Wien 2019, 2020, vol. 40, pp. 435–438. mla: Schröder, Jan, et al. “Messung der Fähigkeit zur Unterrichtsplanung bei Lehramtsstudierenden.” Naturwissenschaftliche Kompetenzen in der Gesellschaft von morgen. Gesellschaft für Didaktik der Chemie und Physik. Jahrestagung in Wien 2019, edited by Sebastian Habig, vol. 40, 2020, pp. 435–38. short: 'J. Schröder, C. Vogelsang, J. Riese, in: S. Habig (Ed.), Naturwissenschaftliche Kompetenzen in der Gesellschaft von morgen. Gesellschaft für Didaktik der Chemie und Physik. Jahrestagung in Wien 2019, 2020, pp. 435–438.' date_created: 2023-06-05T16:13:37Z date_updated: 2023-06-06T11:17:17Z department: - _id: '299' editor: - first_name: Sebastian full_name: Habig, Sebastian last_name: Habig intvolume: ' 40' language: - iso: ger page: 435-438 publication: Naturwissenschaftliche Kompetenzen in der Gesellschaft von morgen. Gesellschaft für Didaktik der Chemie und Physik. Jahrestagung in Wien 2019 status: public title: Messung der Fähigkeit zur Unterrichtsplanung bei Lehramtsstudierenden type: conference user_id: '84746' volume: 40 year: '2020' ... --- _id: '45466' author: - first_name: Ann-Kathrin full_name: Joswig, Ann-Kathrin last_name: Joswig - first_name: Josef full_name: Riese, Josef id: '429' last_name: Riese orcid: 0000-0003-2927-2619 citation: ama: 'Joswig A-K, Riese J. Ursachen für Veränderungen des physikdidaktischen Wissens im Studium. In: Habig S, ed. Naturwissenschaftliche Kompetenzen in der Gesellschaft von morgen. Gesellschaft für Didaktik der Chemie und Physik. Jahrestagung in Wien 2019. Vol 40. ; 2020:443-446.' apa: Joswig, A.-K., & Riese, J. (2020). Ursachen für Veränderungen des physikdidaktischen Wissens im Studium. In S. Habig (Ed.), Naturwissenschaftliche Kompetenzen in der Gesellschaft von morgen. Gesellschaft für Didaktik der Chemie und Physik. Jahrestagung in Wien 2019 (Vol. 40, pp. 443–446). bibtex: '@inproceedings{Joswig_Riese_2020, title={Ursachen für Veränderungen des physikdidaktischen Wissens im Studium}, volume={40}, booktitle={Naturwissenschaftliche Kompetenzen in der Gesellschaft von morgen. Gesellschaft für Didaktik der Chemie und Physik. Jahrestagung in Wien 2019}, author={Joswig, Ann-Kathrin and Riese, Josef}, editor={Habig, Sebastian}, year={2020}, pages={443–446} }' chicago: Joswig, Ann-Kathrin, and Josef Riese. “Ursachen für Veränderungen des physikdidaktischen Wissens im Studium.” In Naturwissenschaftliche Kompetenzen in der Gesellschaft von morgen. Gesellschaft für Didaktik der Chemie und Physik. Jahrestagung in Wien 2019, edited by Sebastian Habig, 40:443–46, 2020. ieee: A.-K. Joswig and J. Riese, “Ursachen für Veränderungen des physikdidaktischen Wissens im Studium,” in Naturwissenschaftliche Kompetenzen in der Gesellschaft von morgen. Gesellschaft für Didaktik der Chemie und Physik. Jahrestagung in Wien 2019, 2020, vol. 40, pp. 443–446. mla: Joswig, Ann-Kathrin, and Josef Riese. “Ursachen für Veränderungen des physikdidaktischen Wissens im Studium.” Naturwissenschaftliche Kompetenzen in der Gesellschaft von morgen. Gesellschaft für Didaktik der Chemie und Physik. Jahrestagung in Wien 2019, edited by Sebastian Habig, vol. 40, 2020, pp. 443–46. short: 'A.-K. Joswig, J. Riese, in: S. Habig (Ed.), Naturwissenschaftliche Kompetenzen in der Gesellschaft von morgen. Gesellschaft für Didaktik der Chemie und Physik. Jahrestagung in Wien 2019, 2020, pp. 443–446.' date_created: 2023-06-05T16:15:10Z date_updated: 2023-06-06T11:17:12Z department: - _id: '299' editor: - first_name: Sebastian full_name: Habig, Sebastian last_name: Habig intvolume: ' 40' language: - iso: ger page: 443-446 publication: Naturwissenschaftliche Kompetenzen in der Gesellschaft von morgen. Gesellschaft für Didaktik der Chemie und Physik. Jahrestagung in Wien 2019 status: public title: Ursachen für Veränderungen des physikdidaktischen Wissens im Studium type: conference user_id: '84746' volume: 40 year: '2020' ... --- _id: '45467' author: - first_name: David full_name: Buschhütter, David last_name: Buschhütter - first_name: Tanja full_name: Mutschler, Tanja last_name: Mutschler - first_name: Jan full_name: Schröder, Jan last_name: Schröder - first_name: Josef full_name: Riese, Josef id: '429' last_name: Riese orcid: 0000-0003-2927-2619 - first_name: Andreas full_name: Borowski, Andreas last_name: Borowski citation: ama: 'Buschhütter D, Mutschler T, Schröder J, Riese J, Borowski A. Basismodelle in Unterrichtsplanungen im Praxissemester Physik. In: Naturwissenschaftliche Kompetenzen in der Gesellschaft von morgen. Gesellschaft für Didaktik der Chemie und Physik. Jahrestagung in Wien 2019. Vol 40. ; 2020:447-450.' apa: Buschhütter, D., Mutschler, T., Schröder, J., Riese, J., & Borowski, A. (2020). Basismodelle in Unterrichtsplanungen im Praxissemester Physik. Naturwissenschaftliche Kompetenzen in der Gesellschaft von morgen. Gesellschaft für Didaktik der Chemie und Physik. Jahrestagung in Wien 2019, 40, 447–450. bibtex: '@inproceedings{Buschhütter_Mutschler_Schröder_Riese_Borowski_2020, title={Basismodelle in Unterrichtsplanungen im Praxissemester Physik}, volume={40}, booktitle={Naturwissenschaftliche Kompetenzen in der Gesellschaft von morgen. Gesellschaft für Didaktik der Chemie und Physik. Jahrestagung in Wien 2019}, author={Buschhütter, David and Mutschler, Tanja and Schröder, Jan and Riese, Josef and Borowski, Andreas}, year={2020}, pages={447–450} }' chicago: Buschhütter, David, Tanja Mutschler, Jan Schröder, Josef Riese, and Andreas Borowski. “Basismodelle in Unterrichtsplanungen im Praxissemester Physik.” In Naturwissenschaftliche Kompetenzen in der Gesellschaft von morgen. Gesellschaft für Didaktik der Chemie und Physik. Jahrestagung in Wien 2019, 40:447–50, 2020. ieee: D. Buschhütter, T. Mutschler, J. Schröder, J. Riese, and A. Borowski, “Basismodelle in Unterrichtsplanungen im Praxissemester Physik,” in Naturwissenschaftliche Kompetenzen in der Gesellschaft von morgen. Gesellschaft für Didaktik der Chemie und Physik. Jahrestagung in Wien 2019, 2020, vol. 40, pp. 447–450. mla: Buschhütter, David, et al. “Basismodelle in Unterrichtsplanungen im Praxissemester Physik.” Naturwissenschaftliche Kompetenzen in der Gesellschaft von morgen. Gesellschaft für Didaktik der Chemie und Physik. Jahrestagung in Wien 2019, vol. 40, 2020, pp. 447–50. short: 'D. Buschhütter, T. Mutschler, J. Schröder, J. Riese, A. Borowski, in: Naturwissenschaftliche Kompetenzen in der Gesellschaft von morgen. Gesellschaft für Didaktik der Chemie und Physik. Jahrestagung in Wien 2019, 2020, pp. 447–450.' date_created: 2023-06-05T16:17:58Z date_updated: 2023-06-06T11:17:07Z department: - _id: '299' intvolume: ' 40' language: - iso: ger page: 447-450 publication: Naturwissenschaftliche Kompetenzen in der Gesellschaft von morgen. Gesellschaft für Didaktik der Chemie und Physik. Jahrestagung in Wien 2019 status: public title: Basismodelle in Unterrichtsplanungen im Praxissemester Physik type: conference user_id: '84746' volume: 40 year: '2020' ... --- _id: '45468' author: - first_name: Dorothee full_name: Ermel, Dorothee last_name: Ermel - first_name: Josef full_name: Riese, Josef id: '429' last_name: Riese orcid: 0000-0003-2927-2619 citation: ama: 'Ermel D, Riese J. Entwicklung eines Fachpraktikums im Techniklehramt. In: Habig S, ed. Naturwissenschaftliche Kompetenzen in der Gesellschaft von morgen. Gesellschaft für Didaktik der Chemie und Physik. Jahrestagung in Wien 2019. Vol 40. ; 2020:916-919.' apa: Ermel, D., & Riese, J. (2020). Entwicklung eines Fachpraktikums im Techniklehramt. In S. Habig (Ed.), Naturwissenschaftliche Kompetenzen in der Gesellschaft von morgen. Gesellschaft für Didaktik der Chemie und Physik. Jahrestagung in Wien 2019 (Vol. 40, pp. 916–919). bibtex: '@inproceedings{Ermel_Riese_2020, title={Entwicklung eines Fachpraktikums im Techniklehramt}, volume={40}, booktitle={Naturwissenschaftliche Kompetenzen in der Gesellschaft von morgen. Gesellschaft für Didaktik der Chemie und Physik. Jahrestagung in Wien 2019}, author={Ermel, Dorothee and Riese, Josef}, editor={Habig, Sebastian}, year={2020}, pages={916–919} }' chicago: Ermel, Dorothee, and Josef Riese. “Entwicklung eines Fachpraktikums im Techniklehramt.” In Naturwissenschaftliche Kompetenzen in der Gesellschaft von morgen. Gesellschaft für Didaktik der Chemie und Physik. Jahrestagung in Wien 2019, edited by Sebastian Habig, 40:916–19, 2020. ieee: D. Ermel and J. Riese, “Entwicklung eines Fachpraktikums im Techniklehramt,” in Naturwissenschaftliche Kompetenzen in der Gesellschaft von morgen. Gesellschaft für Didaktik der Chemie und Physik. Jahrestagung in Wien 2019, 2020, vol. 40, pp. 916–919. mla: Ermel, Dorothee, and Josef Riese. “Entwicklung eines Fachpraktikums im Techniklehramt.” Naturwissenschaftliche Kompetenzen in der Gesellschaft von morgen. Gesellschaft für Didaktik der Chemie und Physik. Jahrestagung in Wien 2019, edited by Sebastian Habig, vol. 40, 2020, pp. 916–19. short: 'D. Ermel, J. Riese, in: S. Habig (Ed.), Naturwissenschaftliche Kompetenzen in der Gesellschaft von morgen. Gesellschaft für Didaktik der Chemie und Physik. Jahrestagung in Wien 2019, 2020, pp. 916–919.' date_created: 2023-06-05T16:20:03Z date_updated: 2023-06-06T11:17:01Z department: - _id: '299' editor: - first_name: Sebastian full_name: Habig, Sebastian last_name: Habig intvolume: ' 40' language: - iso: ger page: 916-919 publication: Naturwissenschaftliche Kompetenzen in der Gesellschaft von morgen. Gesellschaft für Didaktik der Chemie und Physik. Jahrestagung in Wien 2019 status: public title: Entwicklung eines Fachpraktikums im Techniklehramt type: conference user_id: '84746' volume: 40 year: '2020' ...