[{"status":"public","publication":"Praxishandbuch Robotic Process Automation (RPA)","type":"book_chapter","language":[{"iso":"eng"}],"department":[{"_id":"563"}],"user_id":"15782","_id":"34195","citation":{"mla":"Hobscheidt, Daniela, et al. “Soziotechnische Herausforderungen Bei Der Einführung von RPA Managen.” <i>Praxishandbuch Robotic Process Automation (RPA)</i>, Springer Fachmedien Wiesbaden, 2022, doi:<a href=\"https://doi.org/10.1007/978-3-658-38379-4_8\">10.1007/978-3-658-38379-4_8</a>.","bibtex":"@inbook{Hobscheidt_Menzefricke_Gabriel_Kühn_Dumitrescu_2022, place={Wiesbaden}, title={Soziotechnische Herausforderungen bei der Einführung von RPA managen}, DOI={<a href=\"https://doi.org/10.1007/978-3-658-38379-4_8\">10.1007/978-3-658-38379-4_8</a>}, booktitle={Praxishandbuch Robotic Process Automation (RPA)}, publisher={Springer Fachmedien Wiesbaden}, author={Hobscheidt, Daniela and Menzefricke, Jörn Steffen and Gabriel, Stefan and Kühn, Arno and Dumitrescu, Roman}, year={2022} }","short":"D. Hobscheidt, J.S. Menzefricke, S. Gabriel, A. Kühn, R. Dumitrescu, in: Praxishandbuch Robotic Process Automation (RPA), Springer Fachmedien Wiesbaden, Wiesbaden, 2022.","apa":"Hobscheidt, D., Menzefricke, J. S., Gabriel, S., Kühn, A., &#38; Dumitrescu, R. (2022). Soziotechnische Herausforderungen bei der Einführung von RPA managen. In <i>Praxishandbuch Robotic Process Automation (RPA)</i>. Springer Fachmedien Wiesbaden. <a href=\"https://doi.org/10.1007/978-3-658-38379-4_8\">https://doi.org/10.1007/978-3-658-38379-4_8</a>","ieee":"D. Hobscheidt, J. S. Menzefricke, S. Gabriel, A. Kühn, and R. Dumitrescu, “Soziotechnische Herausforderungen bei der Einführung von RPA managen,” in <i>Praxishandbuch Robotic Process Automation (RPA)</i>, Wiesbaden: Springer Fachmedien Wiesbaden, 2022.","chicago":"Hobscheidt, Daniela, Jörn Steffen Menzefricke, Stefan Gabriel, Arno Kühn, and Roman Dumitrescu. “Soziotechnische Herausforderungen Bei Der Einführung von RPA Managen.” In <i>Praxishandbuch Robotic Process Automation (RPA)</i>. Wiesbaden: Springer Fachmedien Wiesbaden, 2022. <a href=\"https://doi.org/10.1007/978-3-658-38379-4_8\">https://doi.org/10.1007/978-3-658-38379-4_8</a>.","ama":"Hobscheidt D, Menzefricke JS, Gabriel S, Kühn A, Dumitrescu R. Soziotechnische Herausforderungen bei der Einführung von RPA managen. In: <i>Praxishandbuch Robotic Process Automation (RPA)</i>. Springer Fachmedien Wiesbaden; 2022. doi:<a href=\"https://doi.org/10.1007/978-3-658-38379-4_8\">10.1007/978-3-658-38379-4_8</a>"},"place":"Wiesbaden","year":"2022","publication_identifier":{"isbn":["9783658383787","9783658383794"]},"publication_status":"published","doi":"10.1007/978-3-658-38379-4_8","title":"Soziotechnische Herausforderungen bei der Einführung von RPA managen","author":[{"first_name":"Daniela","last_name":"Hobscheidt","full_name":"Hobscheidt, Daniela"},{"first_name":"Jörn Steffen","full_name":"Menzefricke, Jörn Steffen","last_name":"Menzefricke"},{"first_name":"Stefan","last_name":"Gabriel","full_name":"Gabriel, Stefan"},{"last_name":"Kühn","full_name":"Kühn, Arno","first_name":"Arno"},{"first_name":"Roman","full_name":"Dumitrescu, Roman","last_name":"Dumitrescu"}],"date_created":"2022-12-05T12:46:56Z","date_updated":"2022-12-05T12:51:11Z","publisher":"Springer Fachmedien Wiesbaden"},{"publication":"Gestaltung digitalisierter Arbeitswelten","type":"book_chapter","status":"public","department":[{"_id":"563"}],"user_id":"15782","_id":"34193","language":[{"iso":"eng"}],"publication_identifier":{"isbn":["9783662580134","9783662580141"],"issn":["2523-3637","2523-3645"]},"publication_status":"published","citation":{"ieee":"M. Bansmann, R. Dumitrescu, and C. Fechtelpeter, “Transfer von Arbeit 4.0-Anwendungsszenarien,” in <i>Gestaltung digitalisierter Arbeitswelten</i>, Berlin, Heidelberg: Springer Berlin Heidelberg, 2022.","chicago":"Bansmann, Michael, Roman Dumitrescu, and Christian Fechtelpeter. “Transfer von Arbeit 4.0-Anwendungsszenarien.” In <i>Gestaltung Digitalisierter Arbeitswelten</i>. Berlin, Heidelberg: Springer Berlin Heidelberg, 2022. <a href=\"https://doi.org/10.1007/978-3-662-58014-1_3\">https://doi.org/10.1007/978-3-662-58014-1_3</a>.","ama":"Bansmann M, Dumitrescu R, Fechtelpeter C. Transfer von Arbeit 4.0-Anwendungsszenarien. In: <i>Gestaltung Digitalisierter Arbeitswelten</i>. Springer Berlin Heidelberg; 2022. doi:<a href=\"https://doi.org/10.1007/978-3-662-58014-1_3\">10.1007/978-3-662-58014-1_3</a>","apa":"Bansmann, M., Dumitrescu, R., &#38; Fechtelpeter, C. (2022). Transfer von Arbeit 4.0-Anwendungsszenarien. In <i>Gestaltung digitalisierter Arbeitswelten</i>. Springer Berlin Heidelberg. <a href=\"https://doi.org/10.1007/978-3-662-58014-1_3\">https://doi.org/10.1007/978-3-662-58014-1_3</a>","mla":"Bansmann, Michael, et al. “Transfer von Arbeit 4.0-Anwendungsszenarien.” <i>Gestaltung Digitalisierter Arbeitswelten</i>, Springer Berlin Heidelberg, 2022, doi:<a href=\"https://doi.org/10.1007/978-3-662-58014-1_3\">10.1007/978-3-662-58014-1_3</a>.","short":"M. Bansmann, R. Dumitrescu, C. Fechtelpeter, in: Gestaltung Digitalisierter Arbeitswelten, Springer Berlin Heidelberg, Berlin, Heidelberg, 2022.","bibtex":"@inbook{Bansmann_Dumitrescu_Fechtelpeter_2022, place={Berlin, Heidelberg}, title={Transfer von Arbeit 4.0-Anwendungsszenarien}, DOI={<a href=\"https://doi.org/10.1007/978-3-662-58014-1_3\">10.1007/978-3-662-58014-1_3</a>}, booktitle={Gestaltung digitalisierter Arbeitswelten}, publisher={Springer Berlin Heidelberg}, author={Bansmann, Michael and Dumitrescu, Roman and Fechtelpeter, Christian}, year={2022} }"},"year":"2022","place":"Berlin, Heidelberg","date_created":"2022-12-05T12:45:43Z","author":[{"full_name":"Bansmann, Michael","last_name":"Bansmann","first_name":"Michael"},{"first_name":"Roman","full_name":"Dumitrescu, Roman","last_name":"Dumitrescu"},{"first_name":"Christian","full_name":"Fechtelpeter, Christian","last_name":"Fechtelpeter"}],"publisher":"Springer Berlin Heidelberg","date_updated":"2022-12-05T12:51:19Z","doi":"10.1007/978-3-662-58014-1_3","title":"Transfer von Arbeit 4.0-Anwendungsszenarien"},{"status":"public","publication":"Praxishandbuch Robotic Process Automation (RPA)","type":"book_chapter","language":[{"iso":"eng"}],"department":[{"_id":"563"}],"user_id":"15782","_id":"34194","citation":{"apa":"Brock, J., von Enzberg, S., Kühn, A., &#38; Dumitrescu, R. (2022). Nutzung von Process Mining in RPA-Projekten. In <i>Praxishandbuch Robotic Process Automation (RPA)</i>. Springer Fachmedien Wiesbaden. <a href=\"https://doi.org/10.1007/978-3-658-38379-4_5\">https://doi.org/10.1007/978-3-658-38379-4_5</a>","mla":"Brock, Jonathan, et al. “Nutzung von Process Mining in RPA-Projekten.” <i>Praxishandbuch Robotic Process Automation (RPA)</i>, Springer Fachmedien Wiesbaden, 2022, doi:<a href=\"https://doi.org/10.1007/978-3-658-38379-4_5\">10.1007/978-3-658-38379-4_5</a>.","bibtex":"@inbook{Brock_von Enzberg_Kühn_Dumitrescu_2022, place={Wiesbaden}, title={Nutzung von Process Mining in RPA-Projekten}, DOI={<a href=\"https://doi.org/10.1007/978-3-658-38379-4_5\">10.1007/978-3-658-38379-4_5</a>}, booktitle={Praxishandbuch Robotic Process Automation (RPA)}, publisher={Springer Fachmedien Wiesbaden}, author={Brock, Jonathan and von Enzberg, Sebastian and Kühn, Arno and Dumitrescu, Roman}, year={2022} }","short":"J. Brock, S. von Enzberg, A. Kühn, R. Dumitrescu, in: Praxishandbuch Robotic Process Automation (RPA), Springer Fachmedien Wiesbaden, Wiesbaden, 2022.","chicago":"Brock, Jonathan, Sebastian von Enzberg, Arno Kühn, and Roman Dumitrescu. “Nutzung von Process Mining in RPA-Projekten.” In <i>Praxishandbuch Robotic Process Automation (RPA)</i>. Wiesbaden: Springer Fachmedien Wiesbaden, 2022. <a href=\"https://doi.org/10.1007/978-3-658-38379-4_5\">https://doi.org/10.1007/978-3-658-38379-4_5</a>.","ieee":"J. Brock, S. von Enzberg, A. Kühn, and R. Dumitrescu, “Nutzung von Process Mining in RPA-Projekten,” in <i>Praxishandbuch Robotic Process Automation (RPA)</i>, Wiesbaden: Springer Fachmedien Wiesbaden, 2022.","ama":"Brock J, von Enzberg S, Kühn A, Dumitrescu R. Nutzung von Process Mining in RPA-Projekten. In: <i>Praxishandbuch Robotic Process Automation (RPA)</i>. Springer Fachmedien Wiesbaden; 2022. doi:<a href=\"https://doi.org/10.1007/978-3-658-38379-4_5\">10.1007/978-3-658-38379-4_5</a>"},"year":"2022","place":"Wiesbaden","publication_identifier":{"isbn":["9783658383787","9783658383794"]},"publication_status":"published","doi":"10.1007/978-3-658-38379-4_5","title":"Nutzung von Process Mining in RPA-Projekten","date_created":"2022-12-05T12:46:26Z","author":[{"first_name":"Jonathan","last_name":"Brock","full_name":"Brock, Jonathan"},{"last_name":"von Enzberg","full_name":"von Enzberg, Sebastian","first_name":"Sebastian"},{"first_name":"Arno","full_name":"Kühn, Arno","last_name":"Kühn"},{"first_name":"Roman","full_name":"Dumitrescu, Roman","last_name":"Dumitrescu"}],"date_updated":"2022-12-05T12:51:14Z","publisher":"Springer Fachmedien Wiesbaden"},{"user_id":"69383","department":[{"_id":"4"}],"_id":"34200","type":"journal_article","status":"public","author":[{"first_name":"Thiemo","last_name":"Bloh","full_name":"Bloh, Thiemo"}],"volume":2022,"date_updated":"2022-12-05T13:26:35Z","doi":"10.31244/zfe.2022.02.02","publication_status":"published","publication_identifier":{"issn":["1619-5515","2699-5506"]},"citation":{"ama":"Bloh T. Rekonstruktive Evaluationsforschung im Kontext praxeologischer Kompetenzdiskurse. Kritische Reflexionen und konzeptionelle Überlegungen zur Dokumentarischen Evaluationsforschung. <i>Zeitschrift für Evaluation</i>. 2022;2022(02):193-215. doi:<a href=\"https://doi.org/10.31244/zfe.2022.02.02\">10.31244/zfe.2022.02.02</a>","ieee":"T. Bloh, “Rekonstruktive Evaluationsforschung im Kontext praxeologischer Kompetenzdiskurse. Kritische Reflexionen und konzeptionelle Überlegungen zur Dokumentarischen Evaluationsforschung,” <i>Zeitschrift für Evaluation</i>, vol. 2022, no. 02, pp. 193–215, 2022, doi: <a href=\"https://doi.org/10.31244/zfe.2022.02.02\">10.31244/zfe.2022.02.02</a>.","chicago":"Bloh, Thiemo. “Rekonstruktive Evaluationsforschung im Kontext praxeologischer Kompetenzdiskurse. Kritische Reflexionen und konzeptionelle Überlegungen zur Dokumentarischen Evaluationsforschung.” <i>Zeitschrift für Evaluation</i> 2022, no. 02 (2022): 193–215. <a href=\"https://doi.org/10.31244/zfe.2022.02.02\">https://doi.org/10.31244/zfe.2022.02.02</a>.","mla":"Bloh, Thiemo. “Rekonstruktive Evaluationsforschung im Kontext praxeologischer Kompetenzdiskurse. Kritische Reflexionen und konzeptionelle Überlegungen zur Dokumentarischen Evaluationsforschung.” <i>Zeitschrift für Evaluation</i>, vol. 2022, no. 02, Waxmann, 2022, pp. 193–215, doi:<a href=\"https://doi.org/10.31244/zfe.2022.02.02\">10.31244/zfe.2022.02.02</a>.","bibtex":"@article{Bloh_2022, title={Rekonstruktive Evaluationsforschung im Kontext praxeologischer Kompetenzdiskurse. Kritische Reflexionen und konzeptionelle Überlegungen zur Dokumentarischen Evaluationsforschung}, volume={2022}, DOI={<a href=\"https://doi.org/10.31244/zfe.2022.02.02\">10.31244/zfe.2022.02.02</a>}, number={02}, journal={Zeitschrift für Evaluation}, publisher={Waxmann}, author={Bloh, Thiemo}, year={2022}, pages={193–215} }","short":"T. Bloh, Zeitschrift für Evaluation 2022 (2022) 193–215.","apa":"Bloh, T. (2022). Rekonstruktive Evaluationsforschung im Kontext praxeologischer Kompetenzdiskurse. Kritische Reflexionen und konzeptionelle Überlegungen zur Dokumentarischen Evaluationsforschung. <i>Zeitschrift für Evaluation</i>, <i>2022</i>(02), 193–215. <a href=\"https://doi.org/10.31244/zfe.2022.02.02\">https://doi.org/10.31244/zfe.2022.02.02</a>"},"intvolume":"      2022","page":"193-215","language":[{"iso":"ger"}],"keyword":["Strategy and Management","Applied Psychology","Social Sciences (miscellaneous)","Education","Communication","Statistics and Probability"],"publication":"Zeitschrift für Evaluation","abstract":[{"text":"<jats:p>Praxeologische Kompetenzansätze verstehen Kompetenz als sozial erlernt und folglich als relativ zum sozialen Kontext. Damit einher geht die Frage, wie solche praxeologisch gerahmten Kompetenzen eigentlich unabhängig von der sie hervorbringenden Praxis evaluiert werden können – und eben dadurch erst für einen breiteren Kompetenzdiskurs fruchtbar sind. Die Dokumentarische Evaluationsforschung bietet hierzu erste Anhaltspunkte, offenbart aber auch Grenzen, die mit dem Evaluationsverständnis zusammenhängen, sich jedoch in der Forschungspraxis so nicht finden lassen. Aus der Differenz zwischen Methode und Praxis dokumentarischer Evaluation lässt sich formulieren, wie eine praxeologische Evaluation gestaltet werden könnte. Dabei spielt die Formulierung von Referenzrahmen eine zentrale Rolle, welche einerseits der zu evaluierenden Praktik external sein, andererseits praktisch formuliert werden müssen, damit sie soziale Praktiken jenseits ihrer eigenen Sinnhaftigkeit evaluativ (er-)fassen können.</jats:p>","lang":"eng"}],"date_created":"2022-12-05T13:25:58Z","publisher":"Waxmann","title":"Rekonstruktive Evaluationsforschung im Kontext praxeologischer Kompetenzdiskurse. Kritische Reflexionen und konzeptionelle Überlegungen zur Dokumentarischen Evaluationsforschung","issue":"02","quality_controlled":"1","year":"2022"},{"publication_status":"published","quality_controlled":"1","citation":{"ama":"Bloh T, Caruso C. Ein kritisch-multiperspektivischer Blick auf Forschendes Lernen in der Lehrkräftebildung. Fragen, Erwägungen und Rekonstruktionen. <i>die hochschullehre</i>. 2022;8. doi:<a href=\"https://doi.org/10.3278/HSL2221W\">10.3278/HSL2221W</a>","chicago":"Bloh, Thiemo, and Carina Caruso. “Ein kritisch-multiperspektivischer Blick auf Forschendes Lernen in der Lehrkräftebildung. Fragen, Erwägungen und Rekonstruktionen.” <i>die hochschullehre</i> 8 (2022). <a href=\"https://doi.org/10.3278/HSL2221W\">https://doi.org/10.3278/HSL2221W</a>.","ieee":"T. Bloh and C. Caruso, “Ein kritisch-multiperspektivischer Blick auf Forschendes Lernen in der Lehrkräftebildung. Fragen, Erwägungen und Rekonstruktionen.,” <i>die hochschullehre</i>, vol. 8, 2022, doi: <a href=\"https://doi.org/10.3278/HSL2221W\">10.3278/HSL2221W</a>.","apa":"Bloh, T., &#38; Caruso, C. (2022). Ein kritisch-multiperspektivischer Blick auf Forschendes Lernen in der Lehrkräftebildung. Fragen, Erwägungen und Rekonstruktionen. <i>die hochschullehre</i>, <i>8</i>. <a href=\"https://doi.org/10.3278/HSL2221W\">https://doi.org/10.3278/HSL2221W</a>","bibtex":"@article{Bloh_Caruso_2022, title={Ein kritisch-multiperspektivischer Blick auf Forschendes Lernen in der Lehrkräftebildung. Fragen, Erwägungen und Rekonstruktionen.}, volume={8}, DOI={<a href=\"https://doi.org/10.3278/HSL2221W\">10.3278/HSL2221W</a>}, journal={die hochschullehre}, author={Bloh, Thiemo and Caruso, Carina}, year={2022} }","mla":"Bloh, Thiemo, and Carina Caruso. “Ein kritisch-multiperspektivischer Blick auf Forschendes Lernen in der Lehrkräftebildung. Fragen, Erwägungen und Rekonstruktionen.” <i>die hochschullehre</i>, vol. 8, 2022, doi:<a href=\"https://doi.org/10.3278/HSL2221W\">10.3278/HSL2221W</a>.","short":"T. Bloh, C. Caruso, die hochschullehre 8 (2022)."},"intvolume":"         8","year":"2022","author":[{"first_name":"Thiemo","orcid":"0000-0002-2215-2924","last_name":"Bloh","id":"69383","full_name":"Bloh, Thiemo"},{"first_name":"Carina","full_name":"Caruso, Carina","last_name":"Caruso"}],"date_created":"2022-12-05T13:23:42Z","volume":8,"oa":"1","date_updated":"2022-12-05T13:26:41Z","main_file_link":[{"url":"https://www.wbv.de/shop/Ein-kritisch-multiperspektivischer-Blick-auf-Forschendes-Lernen-in-der-Lehrkraeftebildung-HSL2221W","open_access":"1"}],"doi":"10.3278/HSL2221W","title":"Ein kritisch-multiperspektivischer Blick auf Forschendes Lernen in der Lehrkräftebildung. Fragen, Erwägungen und Rekonstruktionen.","type":"journal_article","publication":"die hochschullehre","status":"public","user_id":"69383","department":[{"_id":"4"}],"_id":"34198","language":[{"iso":"ger"}]},{"language":[{"iso":"ger"}],"user_id":"69383","department":[{"_id":"4"}],"_id":"34199","status":"public","type":"journal_article","publication":"Zeitschrift für Pädagogik","doi":"10.3262/ZP2206749","title":"Grundlagentheoretische Differenzen in der Lehrkräftekooperationsforschung","author":[{"id":"69383","full_name":"Bloh, Thiemo","last_name":"Bloh","orcid":"0000-0002-2215-2924","first_name":"Thiemo"}],"date_created":"2022-12-05T13:25:20Z","volume":68,"date_updated":"2022-12-05T13:26:38Z","citation":{"ieee":"T. Bloh, “Grundlagentheoretische Differenzen in der Lehrkräftekooperationsforschung,” <i>Zeitschrift für Pädagogik</i>, vol. 68, no. 6, pp. 749–762, 2022, doi: <a href=\"https://doi.org/10.3262/ZP2206749\">10.3262/ZP2206749</a>.","chicago":"Bloh, Thiemo. “Grundlagentheoretische Differenzen in der Lehrkräftekooperationsforschung.” <i>Zeitschrift für Pädagogik</i> 68, no. 6 (2022): 749–62. <a href=\"https://doi.org/10.3262/ZP2206749\">https://doi.org/10.3262/ZP2206749</a>.","ama":"Bloh T. Grundlagentheoretische Differenzen in der Lehrkräftekooperationsforschung. <i>Zeitschrift für Pädagogik</i>. 2022;68(6):749-762. doi:<a href=\"https://doi.org/10.3262/ZP2206749\">10.3262/ZP2206749</a>","short":"T. Bloh, Zeitschrift für Pädagogik 68 (2022) 749–762.","mla":"Bloh, Thiemo. “Grundlagentheoretische Differenzen in der Lehrkräftekooperationsforschung.” <i>Zeitschrift für Pädagogik</i>, vol. 68, no. 6, 2022, pp. 749–62, doi:<a href=\"https://doi.org/10.3262/ZP2206749\">10.3262/ZP2206749</a>.","bibtex":"@article{Bloh_2022, title={Grundlagentheoretische Differenzen in der Lehrkräftekooperationsforschung}, volume={68}, DOI={<a href=\"https://doi.org/10.3262/ZP2206749\">10.3262/ZP2206749</a>}, number={6}, journal={Zeitschrift für Pädagogik}, author={Bloh, Thiemo}, year={2022}, pages={749–762} }","apa":"Bloh, T. (2022). Grundlagentheoretische Differenzen in der Lehrkräftekooperationsforschung. <i>Zeitschrift für Pädagogik</i>, <i>68</i>(6), 749–762. <a href=\"https://doi.org/10.3262/ZP2206749\">https://doi.org/10.3262/ZP2206749</a>"},"page":"749-762","intvolume":"        68","year":"2022","issue":"6","publication_status":"published","quality_controlled":"1"},{"year":"2022","intvolume":"        24","citation":{"short":"M. Neuser, F. Kappe, J. Ostermeier, J.T. Krüger, M. Bobbert, G. Meschut, M. Schaper, O. Grydin, Advanced Engineering Materials 24 (2022).","mla":"Neuser, Moritz, et al. “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting.” <i>Advanced Engineering Materials</i>, vol. 24, no. 10, 2200874, Wiley, 2022, doi:<a href=\"https://doi.org/10.1002/adem.202200874\">10.1002/adem.202200874</a>.","bibtex":"@article{Neuser_Kappe_Ostermeier_Krüger_Bobbert_Meschut_Schaper_Grydin_2022, title={Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting}, volume={24}, DOI={<a href=\"https://doi.org/10.1002/adem.202200874\">10.1002/adem.202200874</a>}, number={102200874}, journal={Advanced Engineering Materials}, publisher={Wiley}, author={Neuser, Moritz and Kappe, Fabian and Ostermeier, Jakob and Krüger, Jan Tobias and Bobbert, Mathias and Meschut, Gerson and Schaper, Mirko and Grydin, Olexandr}, year={2022} }","apa":"Neuser, M., Kappe, F., Ostermeier, J., Krüger, J. T., Bobbert, M., Meschut, G., Schaper, M., &#38; Grydin, O. (2022). Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting. <i>Advanced Engineering Materials</i>, <i>24</i>(10), Article 2200874. <a href=\"https://doi.org/10.1002/adem.202200874\">https://doi.org/10.1002/adem.202200874</a>","chicago":"Neuser, Moritz, Fabian Kappe, Jakob Ostermeier, Jan Tobias Krüger, Mathias Bobbert, Gerson Meschut, Mirko Schaper, and Olexandr Grydin. “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting.” <i>Advanced Engineering Materials</i> 24, no. 10 (2022). <a href=\"https://doi.org/10.1002/adem.202200874\">https://doi.org/10.1002/adem.202200874</a>.","ieee":"M. Neuser <i>et al.</i>, “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting,” <i>Advanced Engineering Materials</i>, vol. 24, no. 10, Art. no. 2200874, 2022, doi: <a href=\"https://doi.org/10.1002/adem.202200874\">10.1002/adem.202200874</a>.","ama":"Neuser M, Kappe F, Ostermeier J, et al. Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting. <i>Advanced Engineering Materials</i>. 2022;24(10). doi:<a href=\"https://doi.org/10.1002/adem.202200874\">10.1002/adem.202200874</a>"},"publication_identifier":{"issn":["1438-1656","1527-2648"]},"publication_status":"published","issue":"10","title":"Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting","doi":"10.1002/adem.202200874","date_updated":"2022-12-05T20:09:50Z","publisher":"Wiley","volume":24,"author":[{"first_name":"Moritz","full_name":"Neuser, Moritz","last_name":"Neuser"},{"last_name":"Kappe","full_name":"Kappe, Fabian","first_name":"Fabian"},{"first_name":"Jakob","full_name":"Ostermeier, Jakob","last_name":"Ostermeier"},{"full_name":"Krüger, Jan Tobias","last_name":"Krüger","first_name":"Jan Tobias"},{"first_name":"Mathias","full_name":"Bobbert, Mathias","last_name":"Bobbert"},{"last_name":"Meschut","full_name":"Meschut, Gerson","first_name":"Gerson"},{"first_name":"Mirko","last_name":"Schaper","full_name":"Schaper, Mirko"},{"first_name":"Olexandr","last_name":"Grydin","full_name":"Grydin, Olexandr"}],"date_created":"2022-12-05T20:07:55Z","abstract":[{"text":"AlSi casting alloys combine excellent castability with high strength. Hence, this group of alloys is often used in the automotive sector. The challenge for this application is the brittle character of these alloys which leads to cracks during joint formation when mechanical joining technologies are used. A rise in ductility can be achieved by a considerable increase in the solidification rate which results in grain refinement. High solidification rates can be realized in twin–roll casting (TRC) by water-cooled rolls. Therefore, a hypoeutectic EN AC–AlSi9 (for European Norm - aluminum cast product) is manufactured by the TRC process and analyzed. Subsequently, joining investigations are performed on castings in as-cast and heat-treated condition using the self-piercing riveting process considering the joint formation and the load-bearing capacity. Due to the fine microstructure, the crack initiation can be avoided during joining, while maintaining the joining parameters, especially by specimens in heat treatment conditions. Furthermore, due to the extremely fine microstructure, the load-bearing capacity of the joint can be significantly increased in terms of the maximum load-bearing force and the energy absorbed.","lang":"eng"}],"status":"public","publication":"Advanced Engineering Materials","type":"journal_article","keyword":["Condensed Matter Physics","General Materials Science"],"article_number":"2200874","language":[{"iso":"eng"}],"_id":"34207","project":[{"grant_number":"418701707","name":"TRR 285: TRR 285","_id":"130"},{"name":"TRR 285 - A: TRR 285 - Project Area A","_id":"131"},{"_id":"136","name":"TRR 285 – A02: TRR 285 - Subproject A02"},{"name":"TRR 285 - C: TRR 285 - Project Area C","_id":"133"},{"name":"TRR 285 – C02: TRR 285 - Subproject C02","_id":"146"}],"user_id":"7850"},{"conference":{"name":"50. Jahrestagung der DGHD","start_date":"2022-09-06","end_date":"2022-09-09","location":"Paderborn"},"title":"Was bedeutet Post-Digitalität? – Universitäre Lehrpraktiken zwischen situativer Anforderung und habitueller Prägung","author":[{"first_name":"Thiemo","full_name":"Bloh, Thiemo","id":"69383","last_name":"Bloh","orcid":"0000-0002-2215-2924"}],"date_created":"2022-12-05T13:32:00Z","date_updated":"2022-12-05T13:33:20Z","citation":{"ieee":"T. Bloh, “Was bedeutet Post-Digitalität? – Universitäre Lehrpraktiken zwischen situativer Anforderung und habitueller Prägung,” presented at the 50. Jahrestagung der DGHD, Paderborn, 2022.","chicago":"Bloh, Thiemo. “Was bedeutet Post-Digitalität? – Universitäre Lehrpraktiken zwischen situativer Anforderung und habitueller Prägung,” 2022.","ama":"Bloh T. Was bedeutet Post-Digitalität? – Universitäre Lehrpraktiken zwischen situativer Anforderung und habitueller Prägung. In: ; 2022.","apa":"Bloh, T. (2022). <i>Was bedeutet Post-Digitalität? – Universitäre Lehrpraktiken zwischen situativer Anforderung und habitueller Prägung</i>. 50. Jahrestagung der DGHD, Paderborn.","short":"T. Bloh, in: 2022.","bibtex":"@inproceedings{Bloh_2022, title={Was bedeutet Post-Digitalität? – Universitäre Lehrpraktiken zwischen situativer Anforderung und habitueller Prägung}, author={Bloh, Thiemo}, year={2022} }","mla":"Bloh, Thiemo. <i>Was bedeutet Post-Digitalität? – Universitäre Lehrpraktiken zwischen situativer Anforderung und habitueller Prägung</i>. 2022."},"year":"2022","publication_status":"published","quality_controlled":"1","language":[{"iso":"ger"}],"user_id":"69383","department":[{"_id":"4"}],"_id":"34203","status":"public","type":"conference"},{"type":"conference","status":"public","_id":"34201","user_id":"69383","department":[{"_id":"4"}],"language":[{"iso":"ger"}],"publication_status":"published","quality_controlled":"1","year":"2022","citation":{"chicago":"Bloh, Thiemo. “AussteigerInnen – Fluchtbewegungen in der LehrerInnenbiographie,” 2022.","ieee":"T. Bloh, “AussteigerInnen – Fluchtbewegungen in der LehrerInnenbiographie,” presented at the Jahrestagung der DGfE-Kommission “Professionsforschung und Lehrer:innenbildung,” Oldenburg, 2022.","ama":"Bloh T. AussteigerInnen – Fluchtbewegungen in der LehrerInnenbiographie. In: ; 2022.","bibtex":"@inproceedings{Bloh_2022, title={AussteigerInnen – Fluchtbewegungen in der LehrerInnenbiographie}, author={Bloh, Thiemo}, year={2022} }","short":"T. Bloh, in: 2022.","mla":"Bloh, Thiemo. <i>AussteigerInnen – Fluchtbewegungen in der LehrerInnenbiographie</i>. 2022.","apa":"Bloh, T. (2022). <i>AussteigerInnen – Fluchtbewegungen in der LehrerInnenbiographie</i>. Jahrestagung der DGfE-Kommission “Professionsforschung und Lehrer:innenbildung,” Oldenburg."},"date_updated":"2022-12-05T13:33:25Z","date_created":"2022-12-05T13:29:08Z","author":[{"full_name":"Bloh, Thiemo","id":"69383","last_name":"Bloh","orcid":"0000-0002-2215-2924","first_name":"Thiemo"}],"title":"AussteigerInnen – Fluchtbewegungen in der LehrerInnenbiographie","conference":{"start_date":"2022-09-29","name":"Jahrestagung der DGfE-Kommission \"Professionsforschung und Lehrer:innenbildung\"","location":"Oldenburg","end_date":"2022-09-30"}},{"user_id":"69383","department":[{"_id":"4"}],"_id":"34202","language":[{"iso":"ger"}],"type":"conference","status":"public","author":[{"full_name":"Bloh, Thiemo","id":"69383","orcid":"0000-0002-2215-2924","last_name":"Bloh","first_name":"Thiemo"}],"date_created":"2022-12-05T13:30:50Z","date_updated":"2022-12-05T13:33:22Z","conference":{"start_date":"2022-09-22","name":"ces Jahrestagung","location":"Frankfurt a.M.","end_date":"2022-09-23"},"title":"„Referenzrahmen“ als gewinnbringendes Konstrukt im Kontext Dokumentarischer Evaluationsforschung!?","publication_status":"published","quality_controlled":"1","citation":{"ama":"Bloh T. „Referenzrahmen“ als gewinnbringendes Konstrukt im Kontext Dokumentarischer Evaluationsforschung!? In: ; 2022.","chicago":"Bloh, Thiemo. “„Referenzrahmen“ als gewinnbringendes Konstrukt im Kontext Dokumentarischer Evaluationsforschung!?,” 2022.","ieee":"T. Bloh, “„Referenzrahmen“ als gewinnbringendes Konstrukt im Kontext Dokumentarischer Evaluationsforschung!?,” presented at the ces Jahrestagung, Frankfurt a.M., 2022.","mla":"Bloh, Thiemo. <i>„Referenzrahmen“ als gewinnbringendes Konstrukt im Kontext Dokumentarischer Evaluationsforschung!?</i> 2022.","bibtex":"@inproceedings{Bloh_2022, title={„Referenzrahmen“ als gewinnbringendes Konstrukt im Kontext Dokumentarischer Evaluationsforschung!?}, author={Bloh, Thiemo}, year={2022} }","short":"T. Bloh, in: 2022.","apa":"Bloh, T. (2022). <i>„Referenzrahmen“ als gewinnbringendes Konstrukt im Kontext Dokumentarischer Evaluationsforschung!?</i> ces Jahrestagung, Frankfurt a.M."},"year":"2022"},{"publication_status":"published","quality_controlled":"1","year":"2022","citation":{"apa":"Bloh, T. (2022). <i>The Deconstruction of Professionalism</i>. EARLI SIG14 Conference 2022, Paderborn.","short":"T. Bloh, in: 2022.","bibtex":"@inproceedings{Bloh_2022, title={The Deconstruction of Professionalism}, author={Bloh, Thiemo}, year={2022} }","mla":"Bloh, Thiemo. <i>The Deconstruction of Professionalism</i>. 2022.","ama":"Bloh T. The Deconstruction of Professionalism. In: ; 2022.","ieee":"T. Bloh, “The Deconstruction of Professionalism,” presented at the EARLI SIG14 Conference 2022, Paderborn, 2022.","chicago":"Bloh, Thiemo. “The Deconstruction of Professionalism,” 2022."},"date_updated":"2022-12-05T13:33:17Z","author":[{"first_name":"Thiemo","id":"69383","full_name":"Bloh, Thiemo","last_name":"Bloh","orcid":"0000-0002-2215-2924"}],"date_created":"2022-12-05T13:33:14Z","title":"The Deconstruction of Professionalism","conference":{"location":"Paderborn","end_date":"2022-08-19","start_date":"2022-08-17","name":"EARLI SIG14 Conference 2022"},"type":"conference","status":"public","_id":"34204","user_id":"69383","department":[{"_id":"4"}],"language":[{"iso":"eng"}]},{"publication_status":"published","publication_identifier":{"isbn":["9783031062117","9783031062124"],"issn":["2367-1181","2367-1696"]},"place":"Cham","year":"2022","citation":{"short":"J. Friedlein, J. Mergheim, P. Steinmann, in: The Minerals, Metals &#38;amp; Materials Series, Springer International Publishing, Cham, 2022.","bibtex":"@inbook{Friedlein_Mergheim_Steinmann_2022, place={Cham}, title={Influence of Kinematic Hardening on Clinch Joining of Dual-Phase Steel HCT590X Sheet Metal}, DOI={<a href=\"https://doi.org/10.1007/978-3-031-06212-4_31\">10.1007/978-3-031-06212-4_31</a>}, booktitle={The Minerals, Metals &#38;amp; Materials Series}, publisher={Springer International Publishing}, author={Friedlein, Johannes and Mergheim, Julia and Steinmann, Paul}, year={2022} }","mla":"Friedlein, Johannes, et al. “Influence of Kinematic Hardening on Clinch Joining of Dual-Phase Steel HCT590X Sheet Metal.” <i>The Minerals, Metals &#38;amp; Materials Series</i>, Springer International Publishing, 2022, doi:<a href=\"https://doi.org/10.1007/978-3-031-06212-4_31\">10.1007/978-3-031-06212-4_31</a>.","apa":"Friedlein, J., Mergheim, J., &#38; Steinmann, P. (2022). Influence of Kinematic Hardening on Clinch Joining of Dual-Phase Steel HCT590X Sheet Metal. In <i>The Minerals, Metals &#38;amp; Materials Series</i>. Springer International Publishing. <a href=\"https://doi.org/10.1007/978-3-031-06212-4_31\">https://doi.org/10.1007/978-3-031-06212-4_31</a>","ieee":"J. Friedlein, J. Mergheim, and P. Steinmann, “Influence of Kinematic Hardening on Clinch Joining of Dual-Phase Steel HCT590X Sheet Metal,” in <i>The Minerals, Metals &#38;amp; Materials Series</i>, Cham: Springer International Publishing, 2022.","chicago":"Friedlein, Johannes, Julia Mergheim, and Paul Steinmann. “Influence of Kinematic Hardening on Clinch Joining of Dual-Phase Steel HCT590X Sheet Metal.” In <i>The Minerals, Metals &#38;amp; Materials Series</i>. Cham: Springer International Publishing, 2022. <a href=\"https://doi.org/10.1007/978-3-031-06212-4_31\">https://doi.org/10.1007/978-3-031-06212-4_31</a>.","ama":"Friedlein J, Mergheim J, Steinmann P. Influence of Kinematic Hardening on Clinch Joining of Dual-Phase Steel HCT590X Sheet Metal. In: <i>The Minerals, Metals &#38;amp; Materials Series</i>. Springer International Publishing; 2022. doi:<a href=\"https://doi.org/10.1007/978-3-031-06212-4_31\">10.1007/978-3-031-06212-4_31</a>"},"publisher":"Springer International Publishing","date_updated":"2022-12-05T21:05:52Z","author":[{"first_name":"Johannes","full_name":"Friedlein, Johannes","last_name":"Friedlein"},{"full_name":"Mergheim, Julia","last_name":"Mergheim","first_name":"Julia"},{"full_name":"Steinmann, Paul","last_name":"Steinmann","first_name":"Paul"}],"date_created":"2022-12-05T21:01:29Z","title":"Influence of Kinematic Hardening on Clinch Joining of Dual-Phase Steel HCT590X Sheet Metal","doi":"10.1007/978-3-031-06212-4_31","type":"book_chapter","publication":"The Minerals, Metals &amp; Materials Series","abstract":[{"lang":"eng","text":"Nowadays, clinching is a widely used joining technique, where sheets are joined by pure deformation to create an interlock without the need for auxiliary parts. This leads to advantages such as reduced joining time and manufacturing\r\ncosts. On the other hand, the joint strength solely relies on directed material deformation, which renders an accurate material modelling essential to reliably predict the joint forming. The formation of the joint locally involves large plastic strains and possibly complex non-proportional loading paths, as typical of many metal forming applications. Consequently, a finite plasticity formulation is utilised incorporating a Chaboche–Rousselier kinematic hardening law to capture the Bauschinger effect. Material parameters are identified from tension–compression tests on miniature spec-\r\nimens for the dual-phase steel HCT590X. The resulting material model is implemented in LS-Dyna to study the locally diverse loading paths and give a quantitative statement on the importance of kinematic hardening for clinching. It turns out that the Bauschinger effect mainly affects the springback of the sheets and has a smaller effect on the joint forming itself."}],"status":"public","project":[{"grant_number":"418701707","_id":"130","name":"TRR 285: TRR 285"},{"name":"TRR 285 - A: TRR 285 - Project Area A","_id":"131"},{"name":"TRR 285 – A05: TRR 285 - Subproject A05","_id":"139"}],"_id":"34211","user_id":"7850","keyword":["Clinching","Material modelling","Kinematic hardening","Parameter identification","Bauschinger effect"],"language":[{"iso":"eng"}]},{"issue":"2-3","year":"2022","date_created":"2022-12-05T21:12:10Z","publisher":"Springer Science and Business Media LLC","title":"Numerical and experimental identification of fatigue crack initiation sites in clinched joints","publication":"Production Engineering","abstract":[{"lang":"eng","text":"In this paper, a study based on experimental and numerical simulations is performed to analyze fatigue cracks in clinched joints. An experimental investigation is conducted to determine the failure modes of clinched joints under cyclic loading at different load amplitudes with single-lap shear tests. In addition, numerical FEM simulations of clinching process and subsequent shear loading are performed to support the experimental investigations by analyzing the state of stresses at the location of failure. An attempt is made to explain the location of crack initiation in the experiments using evaluation variables such as contact shear stress and maximum principal stress."}],"language":[{"iso":"eng"}],"keyword":["Industrial and Manufacturing Engineering","Mechanical Engineering"],"publication_identifier":{"issn":["0944-6524","1863-7353"]},"publication_status":"published","page":"305-313","intvolume":"        16","citation":{"chicago":"Ewenz, L., Christian Roman Bielak, Mortaza Otroshi, Mathias Bobbert, Gerson Meschut, and M. Zimmermann. “Numerical and Experimental Identification of Fatigue Crack Initiation Sites in Clinched Joints.” <i>Production Engineering</i> 16, no. 2–3 (2022): 305–13. <a href=\"https://doi.org/10.1007/s11740-022-01124-z\">https://doi.org/10.1007/s11740-022-01124-z</a>.","ieee":"L. Ewenz, C. R. Bielak, M. Otroshi, M. Bobbert, G. Meschut, and M. Zimmermann, “Numerical and experimental identification of fatigue crack initiation sites in clinched joints,” <i>Production Engineering</i>, vol. 16, no. 2–3, pp. 305–313, 2022, doi: <a href=\"https://doi.org/10.1007/s11740-022-01124-z\">10.1007/s11740-022-01124-z</a>.","ama":"Ewenz L, Bielak CR, Otroshi M, Bobbert M, Meschut G, Zimmermann M. Numerical and experimental identification of fatigue crack initiation sites in clinched joints. <i>Production Engineering</i>. 2022;16(2-3):305-313. doi:<a href=\"https://doi.org/10.1007/s11740-022-01124-z\">10.1007/s11740-022-01124-z</a>","apa":"Ewenz, L., Bielak, C. R., Otroshi, M., Bobbert, M., Meschut, G., &#38; Zimmermann, M. (2022). Numerical and experimental identification of fatigue crack initiation sites in clinched joints. <i>Production Engineering</i>, <i>16</i>(2–3), 305–313. <a href=\"https://doi.org/10.1007/s11740-022-01124-z\">https://doi.org/10.1007/s11740-022-01124-z</a>","bibtex":"@article{Ewenz_Bielak_Otroshi_Bobbert_Meschut_Zimmermann_2022, title={Numerical and experimental identification of fatigue crack initiation sites in clinched joints}, volume={16}, DOI={<a href=\"https://doi.org/10.1007/s11740-022-01124-z\">10.1007/s11740-022-01124-z</a>}, number={2–3}, journal={Production Engineering}, publisher={Springer Science and Business Media LLC}, author={Ewenz, L. and Bielak, Christian Roman and Otroshi, Mortaza and Bobbert, Mathias and Meschut, Gerson and Zimmermann, M.}, year={2022}, pages={305–313} }","mla":"Ewenz, L., et al. “Numerical and Experimental Identification of Fatigue Crack Initiation Sites in Clinched Joints.” <i>Production Engineering</i>, vol. 16, no. 2–3, Springer Science and Business Media LLC, 2022, pp. 305–13, doi:<a href=\"https://doi.org/10.1007/s11740-022-01124-z\">10.1007/s11740-022-01124-z</a>.","short":"L. Ewenz, C.R. Bielak, M. Otroshi, M. Bobbert, G. Meschut, M. Zimmermann, Production Engineering 16 (2022) 305–313."},"volume":16,"author":[{"full_name":"Ewenz, L.","last_name":"Ewenz","first_name":"L."},{"id":"34782","full_name":"Bielak, Christian Roman","last_name":"Bielak","first_name":"Christian Roman"},{"first_name":"Mortaza","full_name":"Otroshi, Mortaza","id":"71269","orcid":"0000-0002-8652-9209","last_name":"Otroshi"},{"last_name":"Bobbert","id":"7850","full_name":"Bobbert, Mathias","first_name":"Mathias"},{"first_name":"Gerson","last_name":"Meschut","orcid":"0000-0002-2763-1246","id":"32056","full_name":"Meschut, Gerson"},{"first_name":"M.","full_name":"Zimmermann, M.","last_name":"Zimmermann"}],"date_updated":"2022-12-05T21:14:34Z","doi":"10.1007/s11740-022-01124-z","type":"journal_article","status":"public","user_id":"7850","_id":"34213","project":[{"grant_number":"418701707","name":"TRR 285: TRR 285","_id":"130"},{"name":"TRR 285 - A: TRR 285 - Project Area A","_id":"131"},{"_id":"135","name":"TRR 285 – A01: TRR 285 - Subproject A01"},{"_id":"132","name":"TRR 285 - B: TRR 285 - Project Area B"},{"name":"TRR 285 – B02: TRR 285 - Subproject B02","_id":"141"}]},{"publication":"The Minerals, Metals & Materials Series","type":"book_chapter","abstract":[{"lang":"eng","text":"Force–displacement measurements and micrograph analyses are commonly used methods to validate numerical models of clinching processes. However, these methods often lead to resetting of elastic deformations and crack-\r\nclosing after unloading. In contrast, the in situ computed tomography (CT) can provide three-dimensional images of the clinch point under loading conditions. In this paper, the potential of the in situ investigation of a clinching process as validation method is analyzed. For the in situ testing, a tailored test set-up featuring a beryllium cylinder for load-bearing and clinching tools made from ultra-high-strength titanium and Si3N4 are used. In the experiments, the clinching of two aluminum sheets is interrupted at specific process steps in order to perform the CT scans. It is shown that in situ CT visualizes the inner geometry of the joint at high precision and that this method is suitable to validate numerical models."}],"status":"public","_id":"34212","project":[{"_id":"130","name":"TRR 285: TRR 285","grant_number":"418701707"},{"name":"TRR 285 - C: TRR 285 - Project Area C","_id":"133"},{"_id":"148","name":"TRR 285 – C04: TRR 285 - Subproject C04"}],"user_id":"7850","keyword":["Clinching","Non-destructive testing","Computed tomography","In situ CT"],"language":[{"iso":"eng"}],"publication_identifier":{"issn":["2367-1181","2367-1696"],"isbn":["9783031062117","9783031062124"]},"publication_status":"published","place":"Cham","year":"2022","citation":{"ama":"Köhler D, Kupfer R, Troschitz J, Gude M. Clinching in In Situ CT—A Novel Validation Method for Mechanical Joining Processes. In: <i>The Minerals, Metals &#38; Materials Series</i>. Springer International Publishing; 2022. doi:<a href=\"https://doi.org/10.1007/978-3-031-06212-4_75\">10.1007/978-3-031-06212-4_75</a>","ieee":"D. Köhler, R. Kupfer, J. Troschitz, and M. Gude, “Clinching in In Situ CT—A Novel Validation Method for Mechanical Joining Processes,” in <i>The Minerals, Metals &#38; Materials Series</i>, Cham: Springer International Publishing, 2022.","chicago":"Köhler, Daniel, Robert Kupfer, Juliane Troschitz, and Maik Gude. “Clinching in In Situ CT—A Novel Validation Method for Mechanical Joining Processes.” In <i>The Minerals, Metals &#38; Materials Series</i>. Cham: Springer International Publishing, 2022. <a href=\"https://doi.org/10.1007/978-3-031-06212-4_75\">https://doi.org/10.1007/978-3-031-06212-4_75</a>.","apa":"Köhler, D., Kupfer, R., Troschitz, J., &#38; Gude, M. (2022). Clinching in In Situ CT—A Novel Validation Method for Mechanical Joining Processes. In <i>The Minerals, Metals &#38; Materials Series</i>. Springer International Publishing. <a href=\"https://doi.org/10.1007/978-3-031-06212-4_75\">https://doi.org/10.1007/978-3-031-06212-4_75</a>","short":"D. Köhler, R. Kupfer, J. Troschitz, M. Gude, in: The Minerals, Metals &#38; Materials Series, Springer International Publishing, Cham, 2022.","mla":"Köhler, Daniel, et al. “Clinching in In Situ CT—A Novel Validation Method for Mechanical Joining Processes.” <i>The Minerals, Metals &#38; Materials Series</i>, Springer International Publishing, 2022, doi:<a href=\"https://doi.org/10.1007/978-3-031-06212-4_75\">10.1007/978-3-031-06212-4_75</a>.","bibtex":"@inbook{Köhler_Kupfer_Troschitz_Gude_2022, place={Cham}, title={Clinching in In Situ CT—A Novel Validation Method for Mechanical Joining Processes}, DOI={<a href=\"https://doi.org/10.1007/978-3-031-06212-4_75\">10.1007/978-3-031-06212-4_75</a>}, booktitle={The Minerals, Metals &#38; Materials Series}, publisher={Springer International Publishing}, author={Köhler, Daniel and Kupfer, Robert and Troschitz, Juliane and Gude, Maik}, year={2022} }"},"date_updated":"2022-12-05T21:11:47Z","publisher":"Springer International Publishing","date_created":"2022-12-05T21:06:21Z","author":[{"last_name":"Köhler","full_name":"Köhler, Daniel","first_name":"Daniel"},{"first_name":"Robert","last_name":"Kupfer","full_name":"Kupfer, Robert"},{"full_name":"Troschitz, Juliane","last_name":"Troschitz","first_name":"Juliane"},{"first_name":"Maik","last_name":"Gude","full_name":"Gude, Maik"}],"title":"Clinching in In Situ CT—A Novel Validation Method for Mechanical Joining Processes","doi":"10.1007/978-3-031-06212-4_75"},{"publication_status":"published","publication_identifier":{"issn":["1464-4207","2041-3076"]},"issue":"6","year":"2022","citation":{"apa":"Römisch, D., Kraus, M., &#38; Merklein, M. (2022). Investigation of the influence of formed, non-rotationally symmetrical pin geometries and their effect on the joint quality of steel and aluminium sheets by direct pin pressing. <i>Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications</i>, <i>236</i>(6), 1187–1202. <a href=\"https://doi.org/10.1177/14644207221081408\">https://doi.org/10.1177/14644207221081408</a>","bibtex":"@article{Römisch_Kraus_Merklein_2022, title={Investigation of the influence of formed, non-rotationally symmetrical pin geometries and their effect on the joint quality of steel and aluminium sheets by direct pin pressing}, volume={236}, DOI={<a href=\"https://doi.org/10.1177/14644207221081408\">10.1177/14644207221081408</a>}, number={6}, journal={Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications}, publisher={SAGE Publications}, author={Römisch, David and Kraus, Martin and Merklein, Marion}, year={2022}, pages={1187–1202} }","mla":"Römisch, David, et al. “Investigation of the Influence of Formed, Non-Rotationally Symmetrical Pin Geometries and Their Effect on the Joint Quality of Steel and Aluminium Sheets by Direct Pin Pressing.” <i>Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications</i>, vol. 236, no. 6, SAGE Publications, 2022, pp. 1187–202, doi:<a href=\"https://doi.org/10.1177/14644207221081408\">10.1177/14644207221081408</a>.","short":"D. Römisch, M. Kraus, M. Merklein, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 236 (2022) 1187–1202.","ieee":"D. Römisch, M. Kraus, and M. Merklein, “Investigation of the influence of formed, non-rotationally symmetrical pin geometries and their effect on the joint quality of steel and aluminium sheets by direct pin pressing,” <i>Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications</i>, vol. 236, no. 6, pp. 1187–1202, 2022, doi: <a href=\"https://doi.org/10.1177/14644207221081408\">10.1177/14644207221081408</a>.","chicago":"Römisch, David, Martin Kraus, and Marion Merklein. “Investigation of the Influence of Formed, Non-Rotationally Symmetrical Pin Geometries and Their Effect on the Joint Quality of Steel and Aluminium Sheets by Direct Pin Pressing.” <i>Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications</i> 236, no. 6 (2022): 1187–1202. <a href=\"https://doi.org/10.1177/14644207221081408\">https://doi.org/10.1177/14644207221081408</a>.","ama":"Römisch D, Kraus M, Merklein M. Investigation of the influence of formed, non-rotationally symmetrical pin geometries and their effect on the joint quality of steel and aluminium sheets by direct pin pressing. <i>Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications</i>. 2022;236(6):1187-1202. doi:<a href=\"https://doi.org/10.1177/14644207221081408\">10.1177/14644207221081408</a>"},"page":"1187-1202","intvolume":"       236","publisher":"SAGE Publications","date_updated":"2022-12-05T21:41:09Z","author":[{"last_name":"Römisch","full_name":"Römisch, David","first_name":"David"},{"full_name":"Kraus, Martin","last_name":"Kraus","first_name":"Martin"},{"first_name":"Marion","last_name":"Merklein","full_name":"Merklein, Marion"}],"date_created":"2022-12-05T21:39:38Z","volume":236,"title":"Investigation of the influence of formed, non-rotationally symmetrical pin geometries and their effect on the joint quality of steel and aluminium sheets by direct pin pressing","doi":"10.1177/14644207221081408","type":"journal_article","publication":"Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications","abstract":[{"text":"Resource-saving and sustainable production is becoming increasingly important regarding social, political and economic aspects, thus making the use of lightweight-construction technologies a current trend. For this reason, multi-material-systems made of high-strength steel and aluminium as well as metal and fibre-reinforced plastics gain in importance. However, different material properties, e.g. stiffness, thermal expansion coefficients or chemical incompatibilities, are challenging for conventional joining technologies. Joining by cold formed pin structures has shown to have high potential for joining multi-material-systems. These pins can be joined either by direct pin pressing into an unperforated joining partner or by caulking, where the pins are inserted through a pre-punched joining partner and the pin head is upset, resulting in a form-fit joint. Usually, cylindrical pins are used for joining. However, non-rotationally symmetrical pin geometries offer the possibility of introducing a predetermined breaking point or reinforcing a connection in the principal force direction. In this work, cylindrical pins as well as non-rotationally symmetrical pin geometries, such as polygonal and oval pin structures, are cold extruded from the sheet metal plane of an HCT590X+Z dual phase steel and joined in the next step with an EN AW-6014 aluminium using direct pin pressing. Since the formation of an undercut has an crucial influence on the joint strength, the investigations will be focused on the resulting joint geometry. In addition, the effect of different pin heights will be examined to analyse the joint formation at different levels of compression of the pin structures. Finally, the joints are evaluated regarding their joint strength in tensile shear tests and cross tension tests. Here the flow resistance of the geometry used as well as the pin height and thus the strain hardening of the pin base during the extrusion of the pins play a decisive role for the shear strength.","lang":"eng"}],"status":"public","project":[{"name":"TRR 285: TRR 285","_id":"130","grant_number":"418701707"},{"name":"TRR 285 - C: TRR 285 - Project Area C","_id":"133"},{"_id":"145","name":"TRR 285 – C01: TRR 285 - Subproject C01"}],"_id":"34219","user_id":"7850","keyword":["Mechanical Engineering","General Materials Science"],"language":[{"iso":"eng"}]},{"status":"public","abstract":[{"text":"In this study, quasi-unidirectional continuous fiber reinforced thermoplastics (CFRTs) are joined with metal sheets via cold formed cylindrical, elliptical and polygonal pin structures which are directly pressed into the CFRT component after local infrared heating. In comparison to already available studies, the unique novelty is the use of non-rotational symmetric pin structures for the CFRT/metal hybrid joining. Thus, a variation in the fiber orientation in the CFRT component as well as a variation in the non-rotational symmetric pins’ orientation in relation to the sample orientation is conducted. The created samples are consequently mechanically tested via single lap shear experiments in a quasi-static state. Finally, the failure behavior of the single lap shear samples is investigated with the help of microscopic images and detailed photographs. In the single lap shear tests, it could be shown that non-rotational symmetric pin structures lead to an increase in maximum testing forces of up to 74% when compared to cylindrical pins. However, when normalized to the pin foot print related joint strength, only one polygonal pin variation showed increased joint strength in comparison to cylindrical pin structures. The investigation of the failure behavior showed two distinct failure modes. The first failure mode was failure of the CFRT component due to an exceedance of the maximum bearing strength of the pin-hole leading to significant damage in the CFRT component. The second failure mode was pin-deflection due to the applied testing load and a subsequent pin extraction from the CFRT component resulting in significantly less visible damage in the CFRT component. Generally, CFRT failure is more likely with a fiber orientation of 0° in relation to the load direction while pin extraction typically occurs with a fiber orientation of 90°. It is assumed that for future investigations, pin structures with an undercutting shape that creates an interlocking joint could counteract the tendency for pin-extraction and consequently lead to increased maximum joint strengths.","lang":"eng"}],"publication":"Applied Sciences","type":"journal_article","language":[{"iso":"eng"}],"keyword":["Fluid Flow and Transfer Processes","Computer Science Applications","Process Chemistry and Technology","General Engineering","Instrumentation","General Materials Science"],"article_number":"4962","user_id":"7850","_id":"34223","project":[{"_id":"130","name":"TRR 285: TRR 285","grant_number":"418701707"},{"name":"TRR 285 - C: TRR 285 - Project Area C","_id":"133"},{"name":"TRR 285 – C01: TRR 285 - Subproject C01","_id":"145"}],"intvolume":"        12","citation":{"apa":"Popp, J., Römisch, D., Merklein, M., &#38; Drummer, D. (2022). Joining of CFRT/Steel Hybrid Parts via Direct Pressing of Cold Formed Non-Rotational Symmetric Pin Structures. <i>Applied Sciences</i>, <i>12</i>(10), Article 4962. <a href=\"https://doi.org/10.3390/app12104962\">https://doi.org/10.3390/app12104962</a>","bibtex":"@article{Popp_Römisch_Merklein_Drummer_2022, title={Joining of CFRT/Steel Hybrid Parts via Direct Pressing of Cold Formed Non-Rotational Symmetric Pin Structures}, volume={12}, DOI={<a href=\"https://doi.org/10.3390/app12104962\">10.3390/app12104962</a>}, number={104962}, journal={Applied Sciences}, publisher={MDPI AG}, author={Popp, Julian and Römisch, David and Merklein, Marion and Drummer, Dietmar}, year={2022} }","mla":"Popp, Julian, et al. “Joining of CFRT/Steel Hybrid Parts via Direct Pressing of Cold Formed Non-Rotational Symmetric Pin Structures.” <i>Applied Sciences</i>, vol. 12, no. 10, 4962, MDPI AG, 2022, doi:<a href=\"https://doi.org/10.3390/app12104962\">10.3390/app12104962</a>.","short":"J. Popp, D. Römisch, M. Merklein, D. Drummer, Applied Sciences 12 (2022).","ama":"Popp J, Römisch D, Merklein M, Drummer D. Joining of CFRT/Steel Hybrid Parts via Direct Pressing of Cold Formed Non-Rotational Symmetric Pin Structures. <i>Applied Sciences</i>. 2022;12(10). doi:<a href=\"https://doi.org/10.3390/app12104962\">10.3390/app12104962</a>","chicago":"Popp, Julian, David Römisch, Marion Merklein, and Dietmar Drummer. “Joining of CFRT/Steel Hybrid Parts via Direct Pressing of Cold Formed Non-Rotational Symmetric Pin Structures.” <i>Applied Sciences</i> 12, no. 10 (2022). <a href=\"https://doi.org/10.3390/app12104962\">https://doi.org/10.3390/app12104962</a>.","ieee":"J. Popp, D. Römisch, M. Merklein, and D. Drummer, “Joining of CFRT/Steel Hybrid Parts via Direct Pressing of Cold Formed Non-Rotational Symmetric Pin Structures,” <i>Applied Sciences</i>, vol. 12, no. 10, Art. no. 4962, 2022, doi: <a href=\"https://doi.org/10.3390/app12104962\">10.3390/app12104962</a>."},"year":"2022","issue":"10","publication_identifier":{"issn":["2076-3417"]},"publication_status":"published","doi":"10.3390/app12104962","title":"Joining of CFRT/Steel Hybrid Parts via Direct Pressing of Cold Formed Non-Rotational Symmetric Pin Structures","volume":12,"date_created":"2022-12-05T21:48:01Z","author":[{"full_name":"Popp, Julian","last_name":"Popp","first_name":"Julian"},{"first_name":"David","full_name":"Römisch, David","last_name":"Römisch"},{"first_name":"Marion","full_name":"Merklein, Marion","last_name":"Merklein"},{"last_name":"Drummer","full_name":"Drummer, Dietmar","first_name":"Dietmar"}],"publisher":"MDPI AG","date_updated":"2022-12-05T21:49:30Z"},{"intvolume":"        15","citation":{"short":"J. Troschitz, B. Gröger, V. Würfel, R. Kupfer, M. Gude, Materials 15 (2022).","mla":"Troschitz, Juliane, et al. “Joining Processes for Fibre-Reinforced Thermoplastics: Phenomena and Characterisation.” <i>Materials</i>, vol. 15, no. 15, 5454, MDPI AG, 2022, doi:<a href=\"https://doi.org/10.3390/ma15155454\">10.3390/ma15155454</a>.","bibtex":"@article{Troschitz_Gröger_Würfel_Kupfer_Gude_2022, title={Joining Processes for Fibre-Reinforced Thermoplastics: Phenomena and Characterisation}, volume={15}, DOI={<a href=\"https://doi.org/10.3390/ma15155454\">10.3390/ma15155454</a>}, number={155454}, journal={Materials}, publisher={MDPI AG}, author={Troschitz, Juliane and Gröger, Benjamin and Würfel, Veit and Kupfer, Robert and Gude, Maik}, year={2022} }","apa":"Troschitz, J., Gröger, B., Würfel, V., Kupfer, R., &#38; Gude, M. (2022). Joining Processes for Fibre-Reinforced Thermoplastics: Phenomena and Characterisation. <i>Materials</i>, <i>15</i>(15), Article 5454. <a href=\"https://doi.org/10.3390/ma15155454\">https://doi.org/10.3390/ma15155454</a>","ieee":"J. Troschitz, B. Gröger, V. Würfel, R. Kupfer, and M. Gude, “Joining Processes for Fibre-Reinforced Thermoplastics: Phenomena and Characterisation,” <i>Materials</i>, vol. 15, no. 15, Art. no. 5454, 2022, doi: <a href=\"https://doi.org/10.3390/ma15155454\">10.3390/ma15155454</a>.","chicago":"Troschitz, Juliane, Benjamin Gröger, Veit Würfel, Robert Kupfer, and Maik Gude. “Joining Processes for Fibre-Reinforced Thermoplastics: Phenomena and Characterisation.” <i>Materials</i> 15, no. 15 (2022). <a href=\"https://doi.org/10.3390/ma15155454\">https://doi.org/10.3390/ma15155454</a>.","ama":"Troschitz J, Gröger B, Würfel V, Kupfer R, Gude M. Joining Processes for Fibre-Reinforced Thermoplastics: Phenomena and Characterisation. <i>Materials</i>. 2022;15(15). doi:<a href=\"https://doi.org/10.3390/ma15155454\">10.3390/ma15155454</a>"},"year":"2022","issue":"15","publication_identifier":{"issn":["1996-1944"]},"publication_status":"published","doi":"10.3390/ma15155454","title":"Joining Processes for Fibre-Reinforced Thermoplastics: Phenomena and Characterisation","volume":15,"author":[{"first_name":"Juliane","last_name":"Troschitz","full_name":"Troschitz, Juliane"},{"first_name":"Benjamin","last_name":"Gröger","full_name":"Gröger, Benjamin"},{"full_name":"Würfel, Veit","last_name":"Würfel","first_name":"Veit"},{"first_name":"Robert","full_name":"Kupfer, Robert","last_name":"Kupfer"},{"first_name":"Maik","last_name":"Gude","full_name":"Gude, Maik"}],"date_created":"2022-12-05T21:51:47Z","publisher":"MDPI AG","date_updated":"2022-12-05T21:54:09Z","status":"public","abstract":[{"lang":"eng","text":"Thermoplastic composites (TPCs) are predestined for use in lightweight structures, especially for high-volume applications. In many cases, joining is a key factor for the successful application of TPCs in multi-material systems. Many joining processes for this material group are based on warm forming the joining zone. This results in a change of the local material structure characterised by modified fibre paths, as well as varying fibre contents, which significantly influences the load-bearing behaviour. During the forming process, many different phenomena occur simultaneously at different scales. In this paper, the deformation modes and flow mechanisms of TPCs during forming described in the literature are first analysed. Based on this, three different joining processes are investigated: embedding of inserts, moulding of contour joints, and hotclinching. In order to identify the phenomena occurring in each process and to describe the characteristic resulting material structure in the joining zones, micrographs as well as computed tomography (CT) analyses are performed for both individual process stages and final joining zones."}],"publication":"Materials","type":"journal_article","language":[{"iso":"eng"}],"article_number":"5454","user_id":"7850","_id":"34225","project":[{"name":"TRR 285: TRR 285","_id":"130","grant_number":"418701707"},{"name":"TRR 285 - A: TRR 285 - Project Area A","_id":"131"},{"name":"TRR 285 – A03: TRR 285 - Subproject A03","_id":"137"},{"name":"TRR 285 - C: TRR 285 - Project Area C","_id":"133"},{"name":"TRR 285 – C04: TRR 285 - Subproject C04","_id":"148"}]},{"keyword":["Electrical and Electronic Engineering","Instrumentation"],"language":[{"iso":"eng"}],"publication":"tm - Technisches Messen","abstract":[{"text":"Unter dem Begriff der Auflösung wird für gewöhnlich das kleinste messbare Merkmal eines Messsystems verstanden. In der dimensionellen Computertomografie hingegen haben sich in den vergangenen Jahren mehrere Auflösungskonzepte etabliert, die aufgrund der fehlenden Normung zueinander im Kontrast stehen. In diesem Beitrag werden die drei häufigsten Konzepte, die Voxelgröße, die Ortsauflösung und die metrologische Strukturauflösung in Kürze vorgestellt. Anschließend wird eine Abgrenzung zwischen den Konzepten getroffen und ein Integration der bestehenden Konzepte in ein gemeinsames Amplituden-Wellenlängen Diagramm diskutiert.","lang":"eng"}],"publisher":"Walter de Gruyter GmbH","date_created":"2022-12-05T21:43:51Z","title":"Über die Abgrenzung von Auflösungskonzepten in der industriellen Computertomografie","issue":"s1","year":"2022","_id":"34221","project":[{"grant_number":"418701707","name":"TRR 285: TRR 285","_id":"130"},{"_id":"133","name":"TRR 285 - C: TRR 285 - Project Area C"},{"name":"TRR 285 – C05: TRR 285 - Subproject C05","_id":"149"}],"user_id":"7850","type":"journal_article","status":"public","date_updated":"2022-12-05T21:44:52Z","volume":89,"author":[{"first_name":"Felix","last_name":"Binder","full_name":"Binder, Felix"},{"first_name":"Tino","last_name":"Hausotte","full_name":"Hausotte, Tino"}],"doi":"10.1515/teme-2022-0065","publication_identifier":{"issn":["2196-7113","0171-8096"]},"publication_status":"published","intvolume":"        89","page":"20-24","citation":{"chicago":"Binder, Felix, and Tino Hausotte. “Über Die Abgrenzung von Auflösungskonzepten in Der Industriellen Computertomografie.” <i>Tm - Technisches Messen</i> 89, no. s1 (2022): 20–24. <a href=\"https://doi.org/10.1515/teme-2022-0065\">https://doi.org/10.1515/teme-2022-0065</a>.","ieee":"F. Binder and T. Hausotte, “Über die Abgrenzung von Auflösungskonzepten in der industriellen Computertomografie,” <i>tm - Technisches Messen</i>, vol. 89, no. s1, pp. 20–24, 2022, doi: <a href=\"https://doi.org/10.1515/teme-2022-0065\">10.1515/teme-2022-0065</a>.","ama":"Binder F, Hausotte T. Über die Abgrenzung von Auflösungskonzepten in der industriellen Computertomografie. <i>tm - Technisches Messen</i>. 2022;89(s1):20-24. doi:<a href=\"https://doi.org/10.1515/teme-2022-0065\">10.1515/teme-2022-0065</a>","apa":"Binder, F., &#38; Hausotte, T. (2022). Über die Abgrenzung von Auflösungskonzepten in der industriellen Computertomografie. <i>Tm - Technisches Messen</i>, <i>89</i>(s1), 20–24. <a href=\"https://doi.org/10.1515/teme-2022-0065\">https://doi.org/10.1515/teme-2022-0065</a>","short":"F. Binder, T. Hausotte, Tm - Technisches Messen 89 (2022) 20–24.","mla":"Binder, Felix, and Tino Hausotte. “Über Die Abgrenzung von Auflösungskonzepten in Der Industriellen Computertomografie.” <i>Tm - Technisches Messen</i>, vol. 89, no. s1, Walter de Gruyter GmbH, 2022, pp. 20–24, doi:<a href=\"https://doi.org/10.1515/teme-2022-0065\">10.1515/teme-2022-0065</a>.","bibtex":"@article{Binder_Hausotte_2022, title={Über die Abgrenzung von Auflösungskonzepten in der industriellen Computertomografie}, volume={89}, DOI={<a href=\"https://doi.org/10.1515/teme-2022-0065\">10.1515/teme-2022-0065</a>}, number={s1}, journal={tm - Technisches Messen}, publisher={Walter de Gruyter GmbH}, author={Binder, Felix and Hausotte, Tino}, year={2022}, pages={20–24} }"}},{"year":"2022","intvolume":"        89","page":"83-88","citation":{"ama":"Busch M, Butzhammer L, Hausotte T. Herausforderungen bei computertomografischen Untersuchungen von Fügeverbindungen. <i>tm - Technisches Messen</i>. 2022;89(s1):83-88. doi:<a href=\"https://doi.org/10.1515/teme-2022-0061\">10.1515/teme-2022-0061</a>","chicago":"Busch, Matthias, Lorenz Butzhammer, and Tino Hausotte. “Herausforderungen Bei Computertomografischen Untersuchungen von Fügeverbindungen.” <i>Tm - Technisches Messen</i> 89, no. s1 (2022): 83–88. <a href=\"https://doi.org/10.1515/teme-2022-0061\">https://doi.org/10.1515/teme-2022-0061</a>.","ieee":"M. Busch, L. Butzhammer, and T. Hausotte, “Herausforderungen bei computertomografischen Untersuchungen von Fügeverbindungen,” <i>tm - Technisches Messen</i>, vol. 89, no. s1, pp. 83–88, 2022, doi: <a href=\"https://doi.org/10.1515/teme-2022-0061\">10.1515/teme-2022-0061</a>.","mla":"Busch, Matthias, et al. “Herausforderungen Bei Computertomografischen Untersuchungen von Fügeverbindungen.” <i>Tm - Technisches Messen</i>, vol. 89, no. s1, Walter de Gruyter GmbH, 2022, pp. 83–88, doi:<a href=\"https://doi.org/10.1515/teme-2022-0061\">10.1515/teme-2022-0061</a>.","bibtex":"@article{Busch_Butzhammer_Hausotte_2022, title={Herausforderungen bei computertomografischen Untersuchungen von Fügeverbindungen}, volume={89}, DOI={<a href=\"https://doi.org/10.1515/teme-2022-0061\">10.1515/teme-2022-0061</a>}, number={s1}, journal={tm - Technisches Messen}, publisher={Walter de Gruyter GmbH}, author={Busch, Matthias and Butzhammer, Lorenz and Hausotte, Tino}, year={2022}, pages={83–88} }","short":"M. Busch, L. Butzhammer, T. Hausotte, Tm - Technisches Messen 89 (2022) 83–88.","apa":"Busch, M., Butzhammer, L., &#38; Hausotte, T. (2022). Herausforderungen bei computertomografischen Untersuchungen von Fügeverbindungen. <i>Tm - Technisches Messen</i>, <i>89</i>(s1), 83–88. <a href=\"https://doi.org/10.1515/teme-2022-0061\">https://doi.org/10.1515/teme-2022-0061</a>"},"publication_identifier":{"issn":["2196-7113","0171-8096"]},"publication_status":"published","issue":"s1","title":"Herausforderungen bei computertomografischen Untersuchungen von Fügeverbindungen","doi":"10.1515/teme-2022-0061","publisher":"Walter de Gruyter GmbH","date_updated":"2022-12-05T21:43:30Z","volume":89,"date_created":"2022-12-05T21:42:07Z","author":[{"first_name":"Matthias","full_name":"Busch, Matthias","last_name":"Busch"},{"first_name":"Lorenz","full_name":"Butzhammer, Lorenz","last_name":"Butzhammer"},{"full_name":"Hausotte, Tino","last_name":"Hausotte","first_name":"Tino"}],"abstract":[{"lang":"eng","text":"Die Erkennbarkeit von Rissen und geometrischen Qualitätskennwerten von Fügeverbindungen mittels Computertomografie ist von der Interfacestrukturauflösung abhängig, welche mittels geeigneter Prüfkörper untersucht wird. Die Reduktion von Abbildungsartefakten im Bereich von Bauteilzwischenräumen und -oberflächen verbessert deren dimensionelle Erfassbarkeit."}],"status":"public","publication":"tm - Technisches Messen","type":"journal_article","keyword":["Electrical and Electronic Engineering","Instrumentation"],"language":[{"iso":"eng"}],"_id":"34220","project":[{"name":"TRR 285: TRR 285","_id":"130","grant_number":"418701707"},{"name":"TRR 285 - C: TRR 285 - Project Area C","_id":"133"},{"name":"TRR 285 – C05: TRR 285 - Subproject C05","_id":"149"}],"user_id":"7850"},{"title":"‘Just a Normal Day in the Metaverse’ – Distraction Conflicts of Knowledge Work in Virtual Environments","conference":{"end_date":"2022-12-07","location":"Melbourne","name":"Proceedings of the 33rd Australasian Conference on Information Systems","start_date":"2022-12-04"},"main_file_link":[{"url":"https://www.researchgate.net/publication/365926051_'Just_a_Normal_Day_in_the_Metaverse'_-_Distraction_Conflicts_of_Knowledge_Work_in_Virtual_Environments"}],"date_updated":"2022-12-06T10:21:23Z","author":[{"first_name":"Julian","last_name":"Marx","full_name":"Marx, Julian"},{"id":"77643","full_name":"Rieskamp, Jonas","last_name":"Rieskamp","first_name":"Jonas"},{"first_name":"Milad","full_name":"Mirbabaie, Milad","id":"88691","last_name":"Mirbabaie"}],"date_created":"2022-10-05T08:27:52Z","year":"2022","citation":{"ama":"Marx J, Rieskamp J, Mirbabaie M. ‘Just a Normal Day in the Metaverse’ – Distraction Conflicts of Knowledge Work in Virtual Environments. In: <i>Proceedings of the 33rd Australasian Conference on Information Systems</i>. ; 2022.","chicago":"Marx, Julian, Jonas Rieskamp, and Milad Mirbabaie. “‘Just a Normal Day in the Metaverse’ – Distraction Conflicts of Knowledge Work in Virtual Environments.” In <i>Proceedings of the 33rd Australasian Conference on Information Systems</i>, 2022.","ieee":"J. Marx, J. Rieskamp, and M. Mirbabaie, “‘Just a Normal Day in the Metaverse’ – Distraction Conflicts of Knowledge Work in Virtual Environments,” presented at the Proceedings of the 33rd Australasian Conference on Information Systems, Melbourne, 2022.","apa":"Marx, J., Rieskamp, J., &#38; Mirbabaie, M. (2022). ‘Just a Normal Day in the Metaverse’ – Distraction Conflicts of Knowledge Work in Virtual Environments. <i>Proceedings of the 33rd Australasian Conference on Information Systems</i>. Proceedings of the 33rd Australasian Conference on Information Systems, Melbourne.","short":"J. Marx, J. Rieskamp, M. Mirbabaie, in: Proceedings of the 33rd Australasian Conference on Information Systems, 2022.","mla":"Marx, Julian, et al. “‘Just a Normal Day in the Metaverse’ – Distraction Conflicts of Knowledge Work in Virtual Environments.” <i>Proceedings of the 33rd Australasian Conference on Information Systems</i>, 2022.","bibtex":"@inproceedings{Marx_Rieskamp_Mirbabaie_2022, title={‘Just a Normal Day in the Metaverse’ – Distraction Conflicts of Knowledge Work in Virtual Environments}, booktitle={Proceedings of the 33rd Australasian Conference on Information Systems}, author={Marx, Julian and Rieskamp, Jonas and Mirbabaie, Milad}, year={2022} }"},"language":[{"iso":"eng"}],"_id":"33519","user_id":"77643","status":"public","publication":"Proceedings of the 33rd Australasian Conference on Information Systems","type":"conference"}]